Age | Commit message (Collapse) | Author |
|
Enable updating the installed extensible SDK from a local or remote
server, avoiding the need to install it again from scratch when
updating. (This assumes that the updated SDK has been built and then
published somewhere using the oe-publish-sdk script beforehand.)
This plugin is only enabled when devtool is used within the extensible
SDK since it doesn't make sense to use it next to a normal install of
the build system.
E.g.
devtool sdk-update /mnt/sdk-repo/
devtool sdk-update http://mysdkhost/sdk
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When publishing SDK, what we want is basically its metadata and sstate
cache objects. We don't want the SDK to be prepared with running bitbake
as it takes time which reproduces meaningless output for the published SDK.
So this patch adds an option to allow for SDK to be extracted without
preparing the build system.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These dependencies were deliberately removed because it was assumed that
they were provided by nativesdk packages. On the one hand, nativesdk packages
in extensible SDK don't have these packages; on the other hand, even if we
add these nativesdk packages, they are still not useful because we we need
runqemu to run correctly.
So we don't remove these native qemu dependencies.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copy the contents of local.conf under TOPDIR into the final generated
local.conf. In this way, custom settings are also made into the final
local.conf like IMAGE_INSTALL, DISTRO_FEATURES, VIRTUAL-RUNTIME_xxx,
etc. Comments and blank lines are filtered out.
Before this change, installing extensible SDK would usually report failure
when preparing the build system if the user has custom configuration for
DISTRO_FEATURES in local.conf. Also, items in IMAGE_INSTALL_append in
local.conf also don't get built correctly.
This patch solves the above problem by making use of bb.utils.edit_metadata.
In addition, we check to avoid any setting that might lead to host paths
bleeding into the SDK's configuration. Basically, variables with values
starting with '/' are removed. A whitelist mechanism is introduced so that
users could specify variables that should not be ignored. The name of the
whitelist is SDK_LOCAL_CONF_WHITELIST.
The SDK_META_CONF_WHITELIST is removed as it's of no use after this
change.
SDK_LOCAL_CONF_BLACKLIST can be used to prevent copying specific
variable settings to the extensible SDK's local.conf; the default is to
exclude PRSERV_HOST (since this is likely to be internal). Similarly,
SDK_INHERIT_BLACKLIST to forbit local.conf in SDK to inherit certain
classes such as 'buildhistory' or 'icecc' that would not normally make
sense in an SDK environment.
[YOCTO #7616]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we do `bitbake buildtools-tarball' and then after one day do `bitbake
core-image-minimal -c populate_sdk_ext', we would meet errors like below.
| install: cannot stat '/buildarea2/chenqi/poky/build-systemd/tmp/deploy/sdk/
poky-glibc-x86_64-buildtools-tarball-core2-64-buildtools-nativesdk-standalone
-1.8+snapshot-20150429.sh': No such file or directory
The problem is that the output name for buildtools-tarball has ${DATE} in it.
So if populate_sdk_ext task is executed but buildtools-tarball is not rebuilt,
the above error appears.
Instead of hardcoding ${DISTRO_VERSION} which consists of ${DATE} in the
install_tools() function, we should find the latest buildtools-tarball based
on the modification time and install it.
[YOCTO #7674]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only poky sets SDK_NAME to include ${IMAGE_BASENAME} (i.e. ${PN}), so we
can't assume the buildtools filename will include it here. Change it to
look for a file with "buildtools-nativesdk-standalone" in the name
(the buildtools-tarball recipe itself sets TOOLCHAIN_OUTPUTNAME to
include this.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not all hosts are running sufficiently new coreutils.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the extensible sdk uses bitbake, which can't run as root, the sdk
shouldn't be installed as root.
Previously it would error out late into setup when bitbake errored
saying not to run bitbake as root.
Now the script errors with a message saying the extensible sdk can't be
installed as root.
[Yocto #7545]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show a friendly title when running the SDK installer, so the user knows
what SDK they are installing. The title is controlled by the
SDK_INSTALLER_TITLE variable and includes the distro name and SDK
version by default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It may be tempting to edit the configuration of the encapsulated version
of the build system, however that is not the way it is intended to be
used, so add a warning against doing this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most of the time we shouldn't be downloading anything within the
extensible SDK (since it's all pre-built and we have the sstate
artifacts) therefore there's really no need for a connectivity
check, in fact it may just get in the way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using bitbake to do the setscene as part of sdk setup, it would be
useful to have a log in the case where it fails.
The log is called preparing_build_system.log and is in the top level
directory of the extracted sdk.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bbclass will create an SDK with a copy of bitbake and the metadata
and sstate for the target specified for the task. The idea is to let
"system" developers both work on applications and then test adding them
to an image without having to switch between workspaces or having to
download separate items.
Rather than running bitbake directly however, the primary way of running
builds within the extensible SDK is to use the "devtool" command. The
rest of the build system is fixed via locked shared state signatures,
and thus only the recipes you have added get built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|