| Age | Commit message (Collapse) | Author |
|---|
|
Setting them to empty before inheriting copyleft_filter
made them not getting their documented values there.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In sources directory we can find patches/ and temp/.
The first one is filled with symbolic link unusable on another
machines.
The second contains yocto logs to create this archives and are
typically copied when 'S = "${WORKDIR}"'
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When in configured mode the archive will re-run configure itself, but that
doesn't work if there are other tasks that need to run such as cmake's
generate_toolchain_file.
Instead of hard-coding a list of classes and tasks, obtain the list of tasks
preceeding do_configure, filter out ones we don't want to re-run such as
do_patch and do_prepare_recipe_sysroot, and run those too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't have do_configure, or have them but are marked as noexec.
Check for their existance before hooking up dependencies.
[ YOCTO #12868 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When archiving a kernel, if S is ${WORKDIR}/git, then
${WORKDIR}/git is in fact a soft link into work-shared,
and the archive contains just the soft link. Fix by
archiving the real directory.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Special handling for kernel source in work-shared was
incorrectly limited to kernel-yocto.bbclass instead
of kernel.bbclass.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
The requirement for images being built using RPM is too strict to have access to
the RPM functions, simply checking that package_rpm is in PACKAGE_CLASSES is
sufficient.
Also fail if SRPMs are requested but package_rpm isn't enabled, instead of
silently not doing what we were asked.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In the following commit, the archiver expanded RECIPE_SYSROOT
to preserve sysroot paths in configured mode:
...
commit aa2240657b015d46e9ba4bcb6264709a82313d83
Author: Ross Burton <ross.burton@intel.com>
Date: Tue Jun 6 15:23:18 2017 +0100
archiver: preserve sysroot paths in configured mode
...
In meta/conf/multilib.conf, it overrides the variables
of STAGING_DIR_HOST, STAGING_DIR_TARGET and RECIPE_SYSROOT
with "${WORKDIR}/${MLPREFIX}recipe-sysroot".
So the archiver should also expand STAGING_DIR_HOST and
STAGING_DIR_TARGET to preserve sysroot paths in configured mode for
multilib.
[YOCTO #11584]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
do_ar_configured alters WORKDIR but also expects to be able to run do_configure,
so forcibly expand the paths to the sysroots as otherwise they'll point to a
non-existant directory in the temporary WORKDIR.
[ YOCTO #11584 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Error:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ERROR: matchbox-desktop-2.1-r0 do_ar_original: Can not determine archive names
for original source because 'name' URL parameter is unset in more than one URL.
Add it to at least one of these: git://git.yoctoproject.org/matchbox-desktop-2
file://vfolders/%2A
ERROR: matchbox-desktop-2.1-r0 do_ar_original: Function failed: do_ar_original
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function do_ar_original, when recipes have more than one source, it added the
"name" URL parameter as suffix to identify the created tarball.
But the URL type "file://" that we always used to represent a series of patches,
it didn't have "name" parameter, so it failed.
So set "name" to the folder name to identify the created tarball, for example:
In matchbox-desktop bb file, the SRC_URI contains:
file://vfloders/*
We set "name" to "vfolders" to identify the created tarball.
In connman-gnome bb file, the SRC_URI contains:
file://images/*
We set "name" to "images" to identify the created tarball.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
do_unpack_and_patch was not correctly run until recently
("archiver.bbclass: various fixes for original+diff mode") but
with the fix applied, the errors we get indicate the function
is not adapted to work with recipe specific sysroots.
do_unpack_and_patch sets WORKDIR to ARCHIVER_WORKDIR which
affects all path settings relative to WORKDIR, inluding the paths
to recipes' sysroots. IOW, when do_unpack and do_patch are run, they
cannot find the necessary native tools and files located in the
sysroot (e.g., quiltrc) because the paths point to ARCHIVER_WORKDIR.
Adapt do_unpack_and_patch to RSS by restoring the original
STAGING_DIR_NATIVE after WORKDIR is changed to ARCHIVER_WORKDIR.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The recipe name needs to be escaped when using it in a regular expression so
that and special characters are treated literally
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Avoid archiving source for glibc-locale as its tasks
do_fetch do_unpack and do_patch have already been deleted.
Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Adding or removing archiver.bbclass from a build configuration causes
rebuilds of linux-yocto-based kernels because of the
do_kernel_configme->do_unpack_and_patch task dependency.
This particular dependency can be ignored for the do_kernel_configme
sstate signature calculcation. Idea for the fix from Richard Purdie.
Note that building the kernel and adding archiver.bbclass later to
archive sources leads to do_unpack_and_patch running after
do_kernel_configme (because that already ran in the first build),
which might be problematic. This is independent of the change here.
The use case in YOCTO #11441 is to removed archiver.bbclass between a
production build with archiving enabled and builds via oe-selftests
without archiving. That direction is fine.
Fixes: YOCTO #11441
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The diff.gz gets created in do_unpack_and_patch, but
do_deploy_archives did not depend on it, so there was a race
condition. For example, "bitbake linux-intel:do_deploy_archives"
without a prior "bitbake linux-intel:do_kernel_configme" did not
deploy the diff.gz.
When do_unpack_and_patch ran first, it failed because the output
directory didn't exist yet and the error was not detected because the
result of the diff command wasn't checked.
Changing the current working directory in create_diff_gz() without
returning to the original directory caused warnings like this:
WARNING: linux-intel-... do_unpack_and_patch: Task do_unpack_and_patch changed cwd to .../tmp-glibc/work-shared/intel-corei7-64
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, do_ar_recipe ran again unnecessarily when adding or
removing classes like buildhistory.bbclass, because that changes the
BBINCLUDED variable which do_ar_recipe uses to find .bbappend files.
This is both extra work and also sometimes triggered "basehash
changed" errors (seen under oe-selftest, which adds machine.inc and
bblayers.inc) because BBINCLUDED is special and does not cause
the basehash to be recalculated.
The file *content* already was not considered in the task signature,
instead relying indirectly on PF (which includes the revision assigned
by a PR server) to ensure that a new versioned source archive gets
created each time there is a rebuild.
Therefore it makes sense to use the same mechanism and also ignore the
file *list*, i.e. exclude BBINCLUDED from the task signature.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bb.data.expand(x, d) is deprecated API.
[YOCTO #10678]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There's no need to chdir() as tarfile.add() can be told what name to use in the
archive.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The source archiver was not handling the gcc-source target correctly, since it uses the
work-shared directory, we don't want to unpack and patch it twice, just as the comments
say, but the code was not there to check for the gcc-source target.
[YOCTO #10265]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a recipe uses more than one source which isn't a plain file (for
example, multiple git repos), then do_ar_original created the source
archives using the same filename and thus only archived one source.
The "name" parameter is used as file suffix to create unique names for
each source, leading to archives following this pattern:
deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz.
The ${PF} part is a bit redundant, which may or may not be
desirable. The patch is more localized this way (no need to modify
create_tarball()).
For example, meta-oic's iotivity_1.1.1.bb uses:
url_iotivity = "git://github.com/iotivity/iotivity.git"
branch_iotivity = "1.1-rel"
SRC_URI = "${url_iotivity};destsuffix=${S};branch=${branch_iotivity};protocol=http;"
url_tinycbor = "git://github.com/01org/tinycbor.git"
SRC_URI += "${url_tinycbor};name=tinycbor;destsuffix=${S}/extlibs/tinycbor/tinycbor;protocol=http"
url_hippomocks = "git://github.com/dascandy/hippomocks.git"
SRC_URI += "${url_hippomocks};name=hippomocks;destsuffix=${S}/extlibs/hippomocks-master;protocol=http"
SRC_URI += "file://hippomocks_mips_patch"
url_gtest = "http://pkgs.fedoraproject.org/repo/pkgs/gtest/gtest-1.7.0.zip/2d6ec8ccdf5c46b05ba54a9fd1d130d7/gtest-1.7.0.zip"
SRC_URI += "${url_gtest};name=gtest;subdir=${BP}/extlibs/gtest"
url_sqlite = "http://www.sqlite.org/2015/sqlite-amalgamation-3081101.zip"
SRC_URI += "${url_sqlite};name=sqlite3;subdir=${BP}/extlibs/sqlite3;unpack=false"
These now get archived in deploy/sources/*/iotivity-1.1.1-r2/ as:
gtest-1.7.0.zip iotivity-1.1.1-r2-recipe.tar.gz sqlite-amalgamation-3081101.zip
hippomocks_mips_patch iotivity-1.1.1-r2.tar.gz
iotivity-1.1.1-r2-hippomocks.tar.gz iotivity-1.1.1-r2-tinycbor.tar.gz
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Support for absolute paths in the "subdir" parameter was recently
added (bitbake rev: c3873346c6fa). The git fetcher has supported
absolute paths in "destsuffix" already before.
When the path is absolute as in destsuffix=${S}/foobar, the tmpdir
used by do_ar_original gets ignored, which breaks:
- source code archiving (tmpdir is empty)
- compilation due to race conditions (for example, ${S} getting
modified by do_ar_original while do_compile runs)
To solve this, these parameters get removed from URLs before
instantiating the fetcher for them.
This is done unconditionally also for relative paths, because these
paths are not useful when archiving the original source (upstream
source does not have them, they only get used by the recipe during
compilation).
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the output from the task more informative about which directories
are being referenced.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, do_archive_sources will fail for the gcc tasks where there is
common source and the other tasks are not added as dependencies. The failure
happens when trying to restore these tasks from sstate.
To fix this ensure the sources directory is created as expected by the
sstate code.
[YOCTO #9433]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the dependencies injected by this class for recipes in ASSUME_PROVIDED
e.g. tar-native or chrpath-native are ignored. We need to use their "replacement"
names, e.g. tar-replacement-native.
This avoids broken archives and sstate failures with these recipes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a do_deploy_archives_setscene, but no addtask.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
It is pointless to archive several times the gcc source.
This change will archive gcc source once, for the gcc-source-{PV}
recipe.
[YOCTO #9327]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When archiving the original source, the git repositories have the name as
they are in the $DL_DIR plus the source revision; i.e.
"git.yoctoproject.org.linux-yocto-4.4.git.89419d8b90_dadb436904.tar.gz".
This change set the tar name to $PF.tar.gz instead, to have consistency with
the others archives created by the class.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bitbake couldn't add the task ar_configured when
trying to archive the configured source for
gcc-source-${PV} recipes. This is because the task
depended in the do_configure and this task doesn't
exist for gcc-source.
This fix allows to archive configured gcc-source recipe.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently do_unpack_and_patch() and do_ar_configured() are using
the ARCHIVER_OUTDIR as the ARCHIVER_WORKDIR, this lead to have
duplicated files inside the tars when using the archiver class
for patched and configured source.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently the dumpdata task expands python data in the datastore, in
some functions this causes a silent error and the task will fail.
The change also rewrite the function to make a bit clearer.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix some spelling mistakes in bbclass files
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bbappend files are not included in the archiver during do_ar_recipe.
Find and put them into the tarball.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A previous patch intended to fix and improve the archiver class, and while it
did for gcc packages, with it some issues ended up being hidden, the kernel
tasks taken from kernel.bbclass and kernel-yocto.bbclass specifically expect the
kernel to use work-shared, which either ended up causing issues or wasting time
doing unnecessary work, this patch fixes these issues by performing the right
tasks within the archiver in the right order
[YOCTO #8378]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gcc packages use a shared source directory, this causes an issue since the archiver will
try to patch the same source several times (one for each gcc package), producing an error,
the archiver class used stamp-base to check this, nonetheless our gcc packages no longer
use stamp-base, they use gcc-shared instead, which is what broke this functionality.
This patch adds a check to see whether or not the source should be patched,
avoiding patching the source when it shouldn't.
Also, we dont need to create multiple identical tarballs for all gcc packages,
this patch fixes this and creates a single source tarball for gcc.
When requesting patched sources, a race condition is created for linux-yocto tasks,
unpack_and_patch is executed along with kernel_configme, which most of the time
causes errors during configure, since kernel_configme task is specific to the kernel,
simply modifying the tasks order by creating a dependency to kernel_configme was impossible,
causing errors on all other packages that didnt use kernel_configme, this is fixed by
creating a special case for the kernel, adding tasks with correct dependencies,
avoiding the race condition and behaving the way it should for all other packages as well.
[YOCTO #8378]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
stamp-base was only ever used by the shared workdir code in gcc. This
turned out to be problematic and has been replaced by other approaches
which don't need specialist bitbake knowledge.
stamp-base will likely get removed from bitbake but for now, remove it
from archiver to simplfy the code since gcc no longer uses it.
This stops people getting confused by the obsolete code paths which I'm
getting a lot of questions about.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In recipes that are exempt from source code archiving due to
COPYLEFT_LICENSE_EXCLUDE, do_deploy_archives does not have a transitive
dependency on do_unpack. Given enough parallelism, this means
do_deploy_archives can run at the same time or before do_unpack.
Because do_deploy_archives did not specify a working directory, its
working directory was ${B}, which defaults to ${S}, which may be set by
a recipe to a directory that is created by do_unpack.
In this case, do_deploy_archives can fail because do_unpack deletes and
re-creates the directory and do_deploy_archives cannot change into the
non-existent directory. Avoid this problem by explicitly specifying
a working directory for do_deploy_archives (and for
do_deploy_all_archives as well for good measure).
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When working specifically on source archiving, it is useful
to trigger that for all recipes required by something like an
image recipe, without actually having to build that.
"bitbake -c deploy_all_archives <target>" does that now.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The archiver uses a license based filter to provide the source code.
This patch allows to search on name based on two new variables (COPYLEFT_PN_INCLUDE,
COPYLEFT_PN_EXCLUDE). Both variables are empty by default.
The filter by name has higher priority than the license filter.
[YOCTO # 6929]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In trying to eliminate AUTOINC+ from revision strings,
we accidently truncated the strings to almost guarantee
information from SRCREV_FORMAT, when supplied, would be
lost. So, we now only delete any AUTOINC+'s from the string.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When archiving original source, insert the first 10
characters of srcrev, after stripping off any
AUTOINC+, into the filename for tarfiles created
from directories.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If directory names in SRC_URI ended with "/", function
do_ar_original() in layers/oe-core/meta/classes/archiver.bbclass
will generate a tar file whose name is ".tar.gz".
So delete the "/" at the tail of the directory names before use the names.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the do_unpack_and_patch task of archiver, the changed 'WORKDIR' also
casued 'B' changed, create dir 'B' for the possibly requiring of the
tasks which executed in do_unpack_and_patch task.
Such as cut-ecgl's do_patch required 'B' existed:
...
| cp: target 'tmp/work/x86_64-wrs-linux/cut-ecgl/1.0-r0/archiver-work
/cut-ecgl-1.0' is not a directory
...
| ERROR: Function failed: do_patch (log file is located at tmp/work/
x86_64-wrs-linux/cut-ecgl/1.0-r0/temp/do_unpack_and_patch/
log.do_unpack_and_patch.11886)
...
The 'B' dir is implicitly created at the task executing time while the
task tag 'dirs' is not assigned. In the above cut-ecgl example, the 'B'
was created at the wrl_buildlink executing time which is the prefuncs of
task do_unpack. So the following do_patch could use 'B' correctly. But
wrl_buildlink is unnecessary and not invoked in the do_unpack_and_patch
task.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Emit patch series files for original src so that the user knows how to
apply the patch orderly.
[YOCTO #5113]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Filter the license (default: no), the recipe whose license in
COPYLEFT_LICENSE_INCLUDE will be included, and in
COPYLEFT_LICENSE_EXCLUDE will be excluded.
* The user can set the recipe type that would be archived (native,
target, and so on), deafult to all.
The copyleft_filter.bbclass is come from copyleft_compliance.bbclass,
which is used by both copyleft_compliance.bbclass and archiver.bbclass.
[YOCTO #5740]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the code which is only used by copyleft_compliance.bbclass from
archiver.bbclassc, and remove the "inherit archiver" from
copyleft_compliance.bbclass.
The archiver.bbclass is used for archiving various types of sources, but
the copyleft_compliance.bbclass is used for analysing the license, they
don't have much relationships.
[YOCTO #4986]
[YOCTO #5113]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The archiver didn't work, and there were a few problems, for example:
1) There was no src_dir.org (or orig), but the diff command still use it
2) There were a few duplicated code
3) It didn't archive the source for the native or gcc
4) The work flow is not very well
5) The "subprocess.call('fakeroot cp xxxx'" should be removed
6) And others ...
So that we have to refactor it, the benefits are:
1) Fix the problems and make it work well.
2) Reduce more than 300 lines
3) Make it easy to use.
Hre are the explanation about the bbclass:
This bbclass is used for creating archive for:
1) original (or unpacked) source: ARCHIVER_MODE[src] = "original"
2) patched source: ARCHIVER_MODE[src] = "patched" (default)
3) configured source: ARCHIVER_MODE[src] = "configured"
4) The patches between do_unpack and do_patch:
ARCHIVER_MODE[diff] = "1"
And you can set the one that you'd like to exclude from the diff:
ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
5) The environment data, similar to 'bitbake -e recipe':
ARCHIVER_MODE[dumpdata] = "1"
6) The recipe (.bb and .inc): ARCHIVER_MODE[recipe] = "1"
All of the above can be packed into a .src.rpm package: (when PACKAGES
!= "")
ARCHIVER_MODE[srpm] = "1"
[YOCTO #4986]
[YOCTO #5113]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
Adrian Bunk
Fabien Lahoudere
Ross Burton
Tom Hochstein
Hongxu Jia
Dengke Du
Mikko Ylinen
Joshua Watt
Zhenbo Gao
Patrick Ohly
Joshua Lock
Saul Wold
Richard Purdie
Robert Yang
Mariano Lopez
Maxin B. John
Jian Liu
Alejandro Hernandez
Clemens Lang
Joe Slater