| Age | Commit message (Collapse) | Author |
|---|
|
Changed the copyright upper date from 2010 to 2011.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Python 2.6 requirement.
As part of the fix for #628 I added a new question to the FAQ for use
of Poky when you do not have Python 2.6.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
note about Python 2.6 bitbake requirement
Part of the fix for Bug 628 is to add a note that bitbake requires
python 2.6. I added this note before the example bitbake command
that builds an image. I also added a linked reference to the Poky
Reference Manual and mentioned the FAQ appendix. There will be more
information about the python requirement in the FAQ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
new 3.4.5
I made some updates to the 3.4.4 section according to Bruce Ashfield's
feedback. I also added a new section 3.4.5 (Creating a BSP Based on an
Existing Similar BSP Without a Local Kernel Repository).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
section 3.4.4
Added text after the sample bbappend file stating that the user needs
to update the KSRC assignment statement and also remove its comment.
Also they have to remove the comment from the SRC_URI line.
Changed the bitbake command in step 4 to use the linux-yocto-stable
file rather than the linux-yocto file.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Changed 'linux-yocto_git.bbappend' to 'linux-yocto-stable_git.bbappend'
in step 3 just before the code example. This makes the code consistent
with the rest of the example supporting the 2.6.34 kernel.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Step one states that the linux-yocto_git.bbappend file is left. This
file is associated with distro 2.6.37 kernel and the rest of the
example is associated with the 2.6.34 kernel. So, I changed the
step to indicate that the directory is left with a linux-yocto-stable_git.bbappend
file.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
BSP section.
These changes implemented Bruce Ashfield's next round of changes to the
section 4.3.3 example.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
In section 4.3.3 step 2 there was a directory 'build/donf/bblayers.conf'.
I fixed the typo to 'build/conf/bblayers.conf'.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
changed.
The example used to show how to condense and merge two BSPs into a second
SCM used a non-existant machine (cav_ebt5800-standard). I replaced this
machine with 'common_pc_64-standard, which is a real machine.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
common-pc-standard
[BUGID# 597] - After talking with Bruce Ashfield the kernel documentation
needs to support the 2.6.34 disribution. So, the 'common-pc-standard'
strings need to be changed back to 'common_pc-standard'. This fix restores
them.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
tip for saving disk space during a build.
[BUGID# 631] - I added a tip in the section where we show a sample build.
The tip says that you can add 'INHERIT += "rm_work"' to the local.conf file
to help conserve disk space during a build.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
[BUGID# 597] - Changed the string "common_pc" to "common-pc".
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Discovered that the manual was not making correctly due to a stray
</literallayout> statement. I removed this statement and the manual
now builds.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
|
|
poky-qemu command
Depending on the architecture you are booting and the profile of the
filesystem image QEMU might come up in a new shell, and existing shell,
have a GUI, or be in command-line mode. I added a note indicating this
behavior.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
for environment setup command
The value for the 64-bit architecture was "x86-64" and not "x86_64".
Changed it to be correct.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
introducing pre-built section
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
pre-built image section
The pre-built image section was one long section that naturally
broke into several areas. I inserted some sub-sections for better
organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
setup command
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
figure
Changed the figure so that "File System" is "Filesystem"
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
|
|
Revised the manual for better grammar and more technically accurate wordings.
Worked closely with Scott Garman on the revision.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
|
|
Expands a little on PR and INC_PR.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
FILESEXTRAPATH -> FILESEXTRAPATHS
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Added the packages autoconf and automake to both the Debeian-based
host and the RPM-based host example commands. During a fresh
development host system test run I found these packages were
necessary to develop Yocto projects using Eclipse IDE.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Pre-Built Binaries and QEMU section.
Made several small changes:
- Added a period to three-bullet list for consistency
- grammar fix to sentence
- Added clarification for getting stuff from qemu URL
- Fixed the forms for the image and the file system image
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Another round of feedback from Tom Z applied.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Section 1.1 has the example filesystem layout. The last line of the
example filesystem layout had linux-wrs. It has been changed to
linux-yocto-stable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
These changes are another round of edits from Tom Z.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I added a reference to the specific section in the kernel documentation
that describes how to create a BSP Based on an existing similar
BSP. The tools we have that create the PDF manuals from the DocBook
XML do not support cross-referencing to another PDF manual. So, I was
left with adding a clunky text-based reference to the section and a link
to the docs page on the web-site.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I have re-written this section extensively based on a phone call with
Tom Z.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Added wording to indicate this directory as optional if the BSP had
special requirements for graphics support.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Found a mis-spelling that I corrected.
Also added wording to indicate this directory is optional.
Put in a note telling that defaults are set if a formfactor is
not found.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Added wording to be sure user knows to replace "bsp" and "_bsp" in the
boilerplate template example with the actual BSP name (i.e. <bsp_name>).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
It makes more sense to have the sections that describe the various
parts of the common structure as sub-sections to that. That pulls
out the click-through licensing into a higher-level section.
This is better overall section organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
directory from the common structure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
section
I combined the tuning stuff into this section.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
sections.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
Scott Rifenbark
Scott Rifenbark
Paul Eggleton
Richard Purdie