summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* logrotate.py: restore /etc/logrotate.d/wtmpstable/sumo-testMingli Yu2019-03-171-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the test logrotate.LogrotateTest.test_1_logrotate_setup, there is below logic: # mkdir $HOME/logrotate_dir # sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp After all logrotate.LogrotateTest finished, only cleanup $HOME/logrotate_dir as below, but don't restore the config file /etc/logrotate.d/wtmp. [snip] def tearDownClass(cls): cls.tc.target.run('rm -rf $HOME/logrotate_dir') [snip] That's to say, there is one additional line added to /etc/logrotate.d/wtmp and will make the logrotate service start failed when run systemd.SystemdBasicTests.test_systemd_failed Take an example as below when run test as root: # cat /etc/logrotate.d/wtmp # no packages own wtmp -- we'll rotate it here /var/log/wtmp { olddir /root/logrotate_dir missingok monthly create 0664 root utmp minsize 1M rotate 1 } # ls /root/logrotate_dir ls: cannot access '/root/logrotate_dir': No such file or directory # systemctl start logrotate Job for logrotate.service failed because the control process exited with error code. See "systemctl status logrotate.service" and "journalctl -xe" for details. # systemctl status logrotate logrotate.service - Rotate log files Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset> Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago Docs: man:logrotate(8) man:logrotate.conf(5) Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE) Main PID: 540 (code=exited, status=1/FAILURE) Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files... Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'. Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files. Add the logic to restore /etc/logrotate.d/wtmp to make the cleanup complete to fix the above issue. (From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* systemd: fix CVE-2019-6454George McCollister2019-03-173-0/+273
| | | | | | | | | | | | Apply patches from systemd_237-3ubuntu10.13 to fix CVE-2019-6454. CVE-2019-6454 is an issue in which systemd (PID1) can be crashed with a specially formed D-Bus message. For information see: https://usn.ubuntu.com/3891-1/ https://git.launchpad.net/ubuntu/+source/systemd/commit/?h=applied/ubuntu/bionic-updates&id=d7584b894afcaa8a4a1abb69db2a9c81a6276e80 Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: fix CVE-2018-6954George McCollister2019-03-173-0/+2473
| | | | | | | | | | | | | | | | | | | | Apply patches to fix CVE-2018-6954 NVD description from https://nvd.nist.gov/vuln/detail/CVE-2018-6954 systemd-tmpfiles in systemd through 237 mishandles symlinks present in non-terminal path components, which allows local users to obtain ownership of arbitrary files via vectors involving creation of a directory and a file under that directory, and later replacing that directory with a symlink. This occurs even if the fs.protected_symlinks sysctl is turned on. Patches from systemd_237-3ubuntu10.13.debian. These patches shouldn't be required on newer OE releases since they use systemd v239 or higher. Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: Security fix CVE-2018-16866Marcus Cooper2019-03-172-0/+50
| | | | | | | | | | | Affects < v240 Signed-off-by: Marcus Cooper <marcusc@axis.com> >From v2 patch on openembedded-core@lists.openembedded.org Incresed file name number from 0026 to 0027. Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: Security fix CVE-2018-16865George McCollister2019-03-173-0/+141
| | | | | | | | | | | Affects < v240 Based on thud commit d5d2b821fc85b8cf39f683061ac2a45bddd2139f The second patch in the thud commit doesn't apply against 237. Use the version of the second patch CVE-2018-16865_2.patch from systemd_237-3ubuntu10.13.debian. Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: Security fix CVE-2018-16864George McCollister2019-03-172-0/+194
| | | | | | | | | | | Affects < v240 Based on thud commit 403e74b07b6f3c4a2444e68c74a8434fb17aee49 The patch in the thud commit doesn't compile against 237. Use the version of this patch, CVE-2018-16864.patch from systemd_237-3ubuntu10.13.debian. Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: fix CVE-2018-15688Chen Qi2019-03-172-0/+40
| | | | | | | | | | | | | Backport patch to fix the following CVE. CVE: CVE-2018-15688 Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cherry-picked from thud 13591d7224393dc0ae529a03cdf74aceb3540ce9 Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: fix CVE-2018-15687George McCollister2019-03-172-0/+253
| | | | | | | | | | | | | Backport patch to fix the following CVE. CVE: CVE-2018-15687 Based on thud commit eeb621aa19f690971caf862290a172a115578ba1 The patch in the thud commit doesn't compile against 237. Use the version of this patch, CVE-2018-15687.patch from systemd_237-3ubuntu10.13.debian. Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: fix CVE-2018-15686Chen Qi2019-03-172-0/+251
| | | | | | | | | | | | | Backport patch to fix the following CVE. CVE: CVE-2018-15686 Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cherry-picked from thud 0ef70603bc983315eb0e8a97958d995a31198c35 Signed-off-by: George McCollister <george.mccollister@gmail.com>
* systemd: Fix typo in root home variable.ROGEZ Matthieu2019-03-171-1/+1
| | | | | | | | This regression has been introduced while upgrading to version 237 (commit 906230a73b3ccfa4afd2a19a6b0aa18cd1d5fa08) and seems to only affect sumo version. Signed-off-by: Matthieu Rogez <matthieu.rogez@fivesgroup.com>
* oeqa/runtime/dnf: Fix test error when static libs are enabledRichard Purdie2019-03-171-1/+1
| | | | | | | | | | | | The test works by excluding curl-dev which curl-staticdev depends upon. When static libraries aren't disabled, this leads to an odd looking test failure. Simply exclude curl-staticdev as well in case its enabled to make sure the test always works. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* run-postinsts: for dpkg/opkg, do not rely on /etc/*-postinstsStefan Agner2019-03-172-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start opkg/dpkg as soon as the respective package managers status file is present, no matter whether /etc/$pm-postinsts exists. This decouples the implicit link between postinsts scripts in /etc and the package manager: Currently the package manager is only started if those scripts are present, although the package manager does not use those scripts at all! Package managers install their own set of postinst scripts. The behavior when using rpm packages stays the same. Note that using the package managers capability to execute postinst scripts is preferred for good reasons: It makes sure that the package managers database reflects that the packages have been completely installed and configured. This change allows to drop installation of the postinsts scripts when package management is present. This will be done in a separate change. Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to unistall packages") rootfs.py did not install /etc/$pm-postinsts when package management is installed! The change caused YOCTO #8235 which lead to the behavior change of run-postinsts in first place. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* package_rpm/archiver: Apply bandaid to src.rpm creationRichard Purdie2019-02-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory | Building target platforms: noarch-poky-linux | Building for target noarch-poky-linux This is caused by: $ cat log.task_order do_cleansstate (24289): log.do_cleansstate.24289 do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395 do_fetch (24407): log.do_fetch.24407 [..] do_package_write_rpm (25448): log.do_package_write_rpm.25448 do_package_qa (25451): log.do_package_qa.25451 So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources, then it was removed when rpm was running. This leads to a broken Source line in the spec file as the original file was found by the os.listdir(). This fix is just a bandaid over much more fundamental problems sadly. (From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* archiver/package_rpm: Fix the worst src.rpm generation raceRichard Purdie2019-02-252-1/+7
| | | | | | | | | | | | | | | | | The package_rpm code is writing outside the task's sstate directory into the sstate of do_deploy_archives. This is "out of spec" since if the task is installed from sstate, the files are not restored. This means the files may appear/disappear, things are not deterministic and there are races. Extend the do_package_write_rpm code to handle writing the src.rpm into place to avoid these issues. There are other problems but this avoids races around this file. (From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* libtool-cross: Handle ccache sstate 'infection' issuesRichard Purdie2019-02-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | | On a system without ccache, f you: INHERIT += "ccache" bitbake libtool-cross <remove INHERIT> bitbake apmd then it fails due to being unable to find ccache. The references to ccache are coded into libtool-cross but the sstate checksum doesn't reflect this due to the way the class is coded (output should be the same regardless). The simplest solution is to remove references to ccache from the libtool script. The output then works regardless of whether ccache is present or not. The libtool-cross script is only used in a handful of cases (most of the time its dynamically generated by autoconf) so any performance issue is minor. (From OE-Core rev: ed550a49d2114c56e5bc033ecd0e83073d2d4067) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* libtool: Fix patch status tagRichard Purdie2019-02-251-1/+1
| | | | | | | (From OE-Core rev: 28fc470e5e10ee9cce893d037ed5e518bc5612f5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* libtool: Fix problem with libtoolize in multilib installationsRichard Purdie2019-02-252-0/+25
| | | | | | | | | | | | | | | Without this patch /usr/bin/libtoolize is different for each multilib since their host-triplets are different, despite there being no difference in the functionality of libtoolize itself. This change just patches out the problematic line since its just a comment for the user in help text. Ugly but solves the problem. This fixes issues where libtool and libXX-libtool couldn't be installed into the same system. (From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* multilib_script: Add support for multilib scriptsRichard Purdie2019-02-252-0/+36
| | | | | | | | | | | | | | | | | | | | | | | Whilst the package managers handle multilib ELF binaries well, they don't handle scripts in the *bindir directories well. This adds support for marking these up so that they can be handled using update-alternatives. Its done this way so that non-multilib systems don't see any changes and there is standardisation amongst the multilibs on how the alternatives are named and prioritiesd. The priotitisation code needs to be added but this change means there is somewhere to add it. Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g. MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2" to indicate which script files to process from which packages. libtool is used a as a reference to stop the libtool scripts conflicting in a multilib case and allows the kernel-devsrc change to be merged. (From OE-Core rev: 18e837433d07cfdce4019c13f682c6676425a2ad) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* image_types: use cpio-native to build cpio imagesRoss Burton2019-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | As per the previous commit, upstream cpio has a bug which means it crashes on append. If the image being built has already had testimage ran then cpio-native will be in the sysroot. It's also possible that some distributions are shipping this broken CVE patch too. Now that our cpio-native is fixed, until we can be sure that the host cpio isn't broken depend on cpio-native if building a cpio image. [ YOCTO #13042 ] (From OE-Core rev: c3b9aedcbe538d7fa74bd814644b4899769dec46) (From OE-Core rev: a75eba71145efa1c3d206c5e5c00608a50f013bc) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* cpio: fix crash when appending to archivesRoss Burton2019-02-252-0/+88
| | | | | | | | | | | | | | | | The upstream fix for CVE-2016-2037 introduced a read from uninitialized memory bug when appending to an existing archive, which is an operation we perform when building an image. (From OE-Core rev: 046e3e1fca925febf47b3fdd5d4e9ee2e1fad868) (From OE-Core rev: 2ff6ab2e2944c6a53523b4b1611e1d22f6393500) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oe-selftest: devtool: Support meta being a symbolic linkPeter Kjellerstedt2019-02-251-1/+2
| | | | | | | | | | | | oe-selftest's devtool tests have been broken since commit 2457cd57 (oe-selftest: devtool: avoid parallel races by using temporary copy of core) if meta is a symbolic link. (From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oe-selftest: devtool: avoid parallel races by using temporary copy of corePaul Eggleton2019-02-251-0/+64
| | | | | | | | | | | | | | | | | Some of the devtool tests make changes to files under meta/ - legitimately since we want these tests to be working with real recipes and associated files. Unfortunately with the new oe-selftest parallelisation this can break other tests if files go missing at the wrong time (among other scenarios). To avoid this issue, simply take a copy of the core repository and use that for these tests. (We copy the entire repository since changing the path of meta/ influences COREBASE and thus we need to have things like scripts/ alongside as well). (From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* Only add uninative and checksum if inherited uninative classJeremy Puhlman2019-02-251-2/+3
| | | | | | | | | | | The checksum value is only calculated if the uninative class is inherited, so check for inherit before adding it to local.conf (From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36) Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/utils/httpserver: Rework to avoid hangs and improve loggingRichard Purdie2019-02-254-11/+32
| | | | | | | | | | | | | | | | | | | testimage.bbclass installs a SIGTERM handler which conflicts with the use of multiprocessing here. This is paritcularly problematic if the http service is terminated before its started and hence before its had a chance to reset the default signal handler (as the code was written). Instead, temporarily remove testimage's handler whilst forking the http process which means the correct handler is installed and won't deadlock. Also take the opportunity to add in some log messages about the server start and shutdown so that future debugging is easier and its clearer what the code is doing. (From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/dnf: Make sure test_dnf_install does not skippedYeoh Ee Peng2019-02-251-1/+5
| | | | | | | | | | | | | | | | | | | | | During debugging dnf issue, we found that the test_dnf_install PASSED the testing even though the environment does not allow dnf install to run successfully. Further debugging had identified that current test_dnf_install will execute dnf install even when the package to be installed already exist, thus dnf install will just skipped and this test will PASSED even though it was not. To solve this, added additional logic to check if the package to be installed already exist, if yes then remove the package before actually run dnf install. This will make sure dnf install was tested as expected. (From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* perl: add testdepends for sshArmin Kuster2019-02-251-0/+2
| | | | | | | | | | | | fixes: DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print' | DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057 | DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused for master/thud/sumo Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa: rationalise Perl testsRoss Burton2019-02-253-48/+11
| | | | | | | | | | | As with the Python test, this can be both better and faster. No need to copy a file, just run a one-liner. (From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/utils/buildproject: Only clean files if we've done somethingRichard Purdie2019-02-251-0/+5
| | | | | | | | | | We should only be wiping out things on target if the tests have actually run. (From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/selftest/runqemu: Enable kvm when QEMU_USE_KVM is setRobert Yang2019-02-251-0/+5
| | | | | | | | (From OE-Core rev: 564de3681353fe8e203425388e8be9703a89d2da) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/qemu & runtime: qemu do not need ip input from externalYeoh Ee Peng2019-02-252-4/+3
| | | | | | | | | | | | Qemu do not use the ip input from external. It will retrieve ip from QemuRunner instance and assign ip value. (From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/cases: Improve dependencies of kernel/gcc/build testsRichard Purdie2019-02-256-30/+31
| | | | | | | | | | Mark up these tests as needing a compiler, make and kernel source code as appropriate, the image feature requirements can then be retired. (From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/cases: Improve test dependency informationRichard Purdie2019-02-2510-25/+32
| | | | | | | | | | | | | Add the OEHasPackage decorator to a variety of tests so they determine automatically if they should run against a given image. To ensure tests can do this we need to move target operations such as scp commands into the tests and out of the class startup/teardown. (From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/python: clean up Python testRoss Burton2019-02-251-30/+8
| | | | | | | | | | | | | | | | | | | | | | | Currently this is three test cases: 1) test_python_exists. Fail if python3 isn't in PATH. 2) test_python_stdout. Run a Python script and check the output is as expected 3) test_python_testfile. Check that a file test_python_stdout wrote to exists. (1) should be a setup and skip the test module if it isn't present. (2) and (3) should be merged, there's no point copying over a two line Python file, and the test doesn't verify that the file doesn't exist in the first place. Rewrite the test to check that Python is present in a class setup so the entire test is skipped if it isn't and do some simple rot13 to verify that bytecode is being executed correctly. (From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/cases/python: use python 3 rather than python 2Alexander Kanavin2019-02-251-3/+3
| | | | | | | | | | | For example, core-image-sato skipped the test alltogether, as it no longer pulls in Python 2.x at all. (From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* runqemu-gen-tapdevs: Allow run --help without sudoRobert Yang2019-02-251-8/+19
| | | | | | | | | | | | | | | | | | | | | | Then we can get user's UID and GID rather than hardcode to 1000, e.g.: - Without sudo $ runqemu-gen-tapdevs --help [snip] $ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin [snip] - With sudo $ sudo ../poky/scripts/runqemu-gen-tapdevs --help [snip] $ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin [snip] (From OE-Core rev: 446e7da7e56f9de3602498b5ef40e9e0f8f71837) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* runqemu: clean up subprocess usageRoss Burton2019-02-251-34/+29
| | | | | | | | | | | Where possible pass lists instead of strings, don't use a subshell, and call check*() instead of using Popen directly. (From OE-Core rev: d2374623444752af1ad748ed36b68ea58f629bf6) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa/runtime/cases/rpm.py: change to use base-passwd-docChen Qi2019-02-251-13/+13
| | | | | | | | | | | | | | | | | | The test cases assume that rpm-doc is built out, as it says it its comment. This is not always true. And it sometimes results in following error. | cls.tc.target.copyTo(test_file, dst) | UnboundLocalError: local variable 'test_file' referenced before assignment Change to use base-passwd-doc, as this package is more likely to be built out than rpm-doc. (From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa: replace Alex Kanavin's @intel email address with a personal oneAlexander Kanavin2019-02-255-7/+7
| | | | | | | | | | | As I will be leaving Intel, this address will no longer be valid, so swap it for my personal one for now. (From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa: make it work for multiple usersRobert Yang2019-02-254-6/+6
| | | | | | | | | | | | | | | | | | | | | | There are failures when multiple users run oe-selftest on the same host: PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved- tests/201812250324_qemu' This is because /tmp/oe-saved-tests was created by user A, while user B tries to write data in it, then the error will happen. This patch can fix the problem. Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than /tmp/oe-saved-tests/ to fix the problem. (From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* meta/classes/testimage.bbclass: Only validate IMAGE_FSTYPES when is QEMUAníbal Limón2019-02-251-6/+7
| | | | | | | | | | | | | | When use simpleremote target the flash/boot process is executed manually, the IMAGE_FSTYPES validation is only needed when execute testimage against qemu. The supported_fstypes comes from oeqa.core.target.qemu module. (From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage.bbclass: remove boot parameter systemd.log_targetKai Kang2019-02-251-7/+1
| | | | | | | | | | | | | | | | | | | | Boot parameter systemd.log_target=console affects command journalctl's output and causes oe selftest case test_systemd_boot_time fail to pass. | Error at obtaining the boot time from journalctl | RESULTS: | RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s) systemd.log_target=console was introduced by oe-core commit a0bb649 and work with parameter systemd.log_level to enable systemd debug. systemd.log_level has been removed already, so remove systemd.log_target too to make case test_systemd_boot_time pass. (From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage: Add possibility to pass parmeters to qemuErik Botö2019-02-251-1/+4
| | | | | | | | | | | | Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it possible to pass parameters to qemu. This can be useful for e.g. increasing the amount of RAM available during testimage runs. (From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3) Signed-off-by: Erik Botö <erik.boto@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage: Add support for slirpYeoh Ee Peng2019-02-251-0/+5
| | | | | | | | | | | | | Enable testimage to support qemu slirp. Configure "QEMU_USE_SLIRP" & "TEST_SERVER_IP" variables to enable slirp. [YOCTO#10713] (From OE-Core rev: 3df9ee85ce7fe52f0893fd33aea3bf1fcc6ead0a) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage: Enable autorunning of the package manager testsuitesRichard Purdie2019-02-251-3/+1
| | | | | | | | | | Now that the hangs in httpservice are fixed we can let these tests auto skip as appropriate. (From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage: Further cleanup DEFAULT_TEST_SUITESRichard Purdie2019-02-251-3/+1
| | | | | | | | | | Now the test markup of the development tools tests is complete, this can be further tweaked to auto run the correct tests. (From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* testimage: Simplfy DEFAULT_TEST_SUITES logicRichard Purdie2019-02-251-20/+11
| | | | | | | | | | | | | | | | | | | | | | Now that the tests have correct markup to automatically determine which images they can run against, clean up the default test suites logic to be simpler and not image specific. Some cleanup of the compiler tests still needs to be completed but this is a good first step. The only downside to this is more noise during testing as we now see many skipped messages for simple images like core-image-minimal. The auto type is being removed since it currently breaks badly due to the socat mandatory inclusion from the meta-selftest layer which is a problem which needs to be addressed seperately. (From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [Fix for sumo context] Signed-off-by: Armin Kuster <akuster808@gmail.com>
* runtime/dnf: Add new dnf test casesJose Perez Carranza2019-02-252-3/+48
| | | | | | | | | | | | | | Add test cases to test “exclude” and “installroot“ options, also modify the logic of filtering packages on the feed to have all the packages needed by the tests. [YOCTO #10744] (From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc) Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* kernel: don't assign the build user/hostFederico Sauter2019-02-251-2/+2
| | | | | | | | | | | | | | | The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were assigned at the kernel class level, which made it impossible to override them in the local configuration. By setting only the default values of those variables in the kernel class, it is now possible to override them as expected. (From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487) Signed-off-by: Federico Sauter <federico.sauter@ableton.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oeqa: Fix for QEMU_USE_KVMRobert Yang2019-02-253-14/+26
| | | | | | | | | | | | | | | | | | | | | | | Fixed: MACHINE = "qemux86" QEMU_USE_KVM = "qemux86" IMAGE_CLASSES += "testimage" $ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs [snip] File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean raise ValueError("Invalid boolean value '%s'" % value) ValueError: Invalid boolean value 'qemux86' Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm will be enabled if target_arch == build_arch or both of them are x86 archs. (From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* patch: reproducibility: Fix host umask leakageDouglas Royds2019-02-251-0/+1
| | | | | | | | | | | | | | | | | | Some patch files create entirely new files, so their permissions are subject to the host umask. If such a file is later installed into a package with no change in permissions, it breaks the reproducibility of the package. This was observed on libpam, for instance: The patch file pam-security-abstract-securetty-handling.patch creates a new file (tty_secure.c). This file is later copied into the -dbg package with no change in permissions. (From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>