| Age | Commit message (Collapse) | Author |
|---|
|
"bitbake recipe -ccleansstate" should remove binary pkgs from deploy dir
as normal cleansstate does without packagefeed-stability.bbclass.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Drop the self-baked force_rm() method.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Log failures of commands whose output is stored.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove timestamps from the stderr log in order to make the console
output more readable, i.e. more in line with the output from unittest
runner.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that the log file would not miss any records.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Prevent logger from writing to stderr when the tests are being run by
the TestRunner. During this time the logger output is only written to
the log file. This way the console output from the script is cleaner and
not mixed with possible logger records.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Special runCmd() for build perf tests which doesn't raise an
AssertionError when the command fails. This causes command failures to
be detected as test errors instead of test failures. This way "failed"
state of tests is reserved for future making it possible to set e.g.
thresholds for certain measurement results.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Convert scripts/oe-build-perf-test to be compatible with the new Python
unittest based buildperf test framework.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This commit converts the actual tests to be compatible with the new
Python unittest based framework.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new class is derived from unittest.TextTestResult class. It is
actually implemented by modifying the old BuildPerfTestRunner class
which, in turn, is replaced by a totally new simple implementation
derived from unittest.TestRunner.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename BuildPerfTest to BuildPerfTestCase and convert it to be derived
from TestCase class from the unittest framework of the Python standard
library. This doesn't work with our existing testcases or test runner
class and these need to be modified, too.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add logic for the cases when the time retrieved does
not have decimal part.
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Another instance where expected failures need to be not reported to the error
reporting service.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When an image uses systemd journald acts as a main syslog daemon using
/dev/log.
The test_syslog_logger try to log a predifined message into the syslog
using logger and then search using grep in /var/log/messages if this
fails for some reason (file rotated) now search the predifined message
into the journal.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch adds the following packages: python3-enum (needed by python3-git),
python3-selectors (needed by python3-subprocess), python3-signal (needed by python3-subprocess),
and it also fixes the following ones with missing dependencies: python3-subprocess,
python3-compression, python3-datetime
[YOCTO #10127] [YOCTO #10124] [YOCTO #10122]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch adds the following dependencies to be able to import git on
python3: python3-enum, python3-logging, python3-datetime, python3-netclient.
[YOCTO #9757]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Configure detects -march flag based upon target
triplet, it wrongly passes -march=armv4 for all
arm, this is unearthed when compiling with clang
since it errors out with flags like
/tmp/kraj01/a-0c2038.s:27: Error: selected processor does not support `bx r0' in ARM mode
since it does not pass --fix-v4bx along with
-march=armv4, which does not happen with gcc
toolchain since this flag is passed impicitly hence
this error was indetected
Fixed thusly
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Update the dot parser to the new networkx API (using pydotplus to parse).
Also, switch the path display to output the paths as they are found instead of
collecting them into a list, so output appears sooner.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ctype's util.py needs subprocess
lang's inspect.py needs importlib.machinery
math's random.py needs crypt's hashlib
subprocess imports threading
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Updates in License files are due to changes in Copyright date
and Version.
Ensure all tools are packaged into $PN-tools.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These patches are backported from master to fix issues raised by clang
compiler.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This helps in compiling it with with toolchain coming from
a sstate server where its built using a different build time
sysroot.
Secondly, also helps compiling with non-gcc ( clang ) compiler
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes 3 CVES:
CVE-2016-5419
CVE-2016-5420
CVE-2016-5421
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For thoese recipes that are inheriting python*-dir.bbclass, there is
already a PYTHON_SITEPACKAGES_DIR present, use that definition replacing
redundant "${libdir}/python*/site-packages".
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using a copy would only make management of devices erroneous
and makes the system unstable in some scenarios as tools will
have to manipulate both files separately. A link ensures that
both files /proc/mounts and /etc/mtab will have the same
information at all times and this is how it is handled
on newer systems where there is such a need. Same is
suggested by busybox.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We expect that any package that uses the npm bbclass
will have a runtime dependency on node.js
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
4.6.0 -> 4.7.0
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
3.13.0 -> 3.14.0
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pre-5.25.0 perl by default tries to link to an antiquated libnm (new
math) which is not used anymore since the early 1990's. After 2014
another libnm appeared for NetworkManager causing build failures.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Refresh add-geometry-input-when-calibrating.patch to remove
bashism from it.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
|
|
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a -l command-line option for SDK installers to get a list of files
that will be extracted by the SDK - internally this just runs "tar tv"
on the embedded tarball. This can be used to look at which files the SDK
provides without actually installing it. The initial user of this is the
extensible SDK build process which needs to know what binaries are going
to be installed by the buildtools installer without installing it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Determine the name of the current buildtools installer ahead of time,
set it in a variable and use that variable rather than the wildcarded
version everywhere, since it's much tidier.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the buildtools installation failed, we were using a subshell instead
of a compound command and thus the subshell exited but the script
continued on, which is really not what we want to happen. Additionally
log the buildtools installer output to a file and cat it if it fails so
that you can actually see what went wrong, as well as amending the
environment setup script to print a warning as we do when the
preparation fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When we don't have uninative enabled there's more merging to be done in
the default configuration (SDK_EXT_TYPE = "full" which by default means
SDK_INCLUDE_TOOLCHAIN = "1") and there are likely files that already
exist in the sstate feed we're assembling, so we need to take care to
merge the directory contents rather than just moving the directories
over. Additionally we now only run this if uninative genuinely isn't
enabled (i.e. NATIVELSBSTRING is different to the fixed value of
"universal".)
In the process of fixing this I discovered an unusual behaviour in
os.rename() - when we're merging these feeds we're dealing with
hard-linked sstate artifacts, and whilst os.rename() is supposed to
silently overwrite an existing destination (permissions allowing), if
you have the source and destination as hardlinks to the same file then
the os.rename() call will just silently fail. As a result the code now
just checks if the destination exists and deletes the source if so
(since we know it will be the same file, we don't need to check in this
case.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A couple of fixes for the recent sstate filtering implemented in OE-Core
revision 4b7b48fcb9b39fccf8222650c2608325df2a4507:
* We shouldn't be deleting the downloads directory here, since it
contains the uninative tarball that we will need
* TMPDIR might not be named "tmp" - in OE-Core the default is tmp-glibc
so use the actual name of TMPDIR here instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the build in which the eSDK is being built isn't using uninative,
this will have an effect on NATIVELSBSTRING, which will mean that the
eSDK installer won't be able to find any of the native sstate packages.
To keep things simple, under this scenario just disable uninative
temporarily while we run the SDK installer to help us check the presence
of the sstate artifacts we need. Ideally I'd rather not have things like
this that are artificial in this verification step, but on the other
hand this was the least ugly way to solve the problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We were relying on uninative being enabled in the build in which the
eSDK was being produced, which is not the case for example for OE-Core's
default configuration. Move the code that copies the uninative tarball
and writes the checksum to copy_buildsystem so that it happens early
enough for that part of the configuration to be set up when we do the
filtering (which requires running bitbake).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you set up a local mirror in SSTATE_MIRRORS then you can end up with
symlinks in SSTATE_DIR rather than real files. We don't want these
symlinks in the sstate-cache prodcued by gen-lockedsig-cache, so
dereference any symlinks before copying.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you check out OE-Core and then run oe-init-build-env you get an error
about not having bitbake checked out in a "bitbake" subdirectory,
however it's possible to specify the bitbake path on the
oe-init-build-env command line, so hint at that in the error message
rather than implying it has to be in the default location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removing the ccache directory as part of do_clean is unnecessarily
conservative and defeats many of the benefits of ccache.
The original justification for this behaviour was to avoid confusion
in the corner case that the ccache directory becomes corrupted.
However the standard approach for dealing with such highly unlikely
corner cases (ie manually removing tmp) would also recover from
corruption of the ccache directories, without the negative impact of
defeating ccache during normal development.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Robert Yang
Markus Lehtonen
Jose Perez Carranza
Ross Burton
Aníbal Limón
Alejandro Hernandez
Hongxu Jia
Khem Raj
Kyle Russell
Maxin B. John
Ming Liu
Awais Belal
Henry Bruce
Ioan-Adrian Ratiu
Paul Eggleton
Andre McCurdy
Dmitry Rozhkov