| Age | Commit message (Collapse) | Author |
|---|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a crosssdk recipe even they are
not in use at all.
This can lead a lot of churn when the crosssdk sysroot are shared by
machines while they have defined different TARGET_* flags.
Fix it by overriding with BUILD_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a cross recipe even they are not
in use at all.
This can lead a lot of churn when the cross sysroot are shared by
machines while they have defined different TARGET_* flags.
And sometimes it even causes "Taskhash mismatch" errors.
Fix it by overriding with BUILD_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In find_siginfo(), which is used by bitbake-diffsigs among other things,
avoid adding a siginfo file from the sstate-cache where we've already
collected a sigdata file from the stamps directory with the same hash.
This avoids the possibility that the top two files (as picked by default
using the bitbake-diffsigs -t option) are for the same signature and
thus the tool would report no differences. In order to do that, just use
the hashfiles dict that we already have - we just need to change the
code to populate that even if we're collecting matching files without
looking for a fixed set of hashes (i.e. taskhashlist isn't set).
This replaces previous code in bitbake-diffsigs that attempted to filter
these out with limited success.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When comparing signatures with bitbake-diffsigs -t or bitbake -S
printdiff, we use this find_siginfo() function implemented in this
module to find the siginfo/sigdata files corresponding to the tasks
we're looking for. However, native sstate files go into a
NATIVELSBSTRING subdirectory and there was no handling for this when
asking about native recipes.
I'm not even sure why we were walking SSTATE_DIR in order to find
this - we don't need to, we just need to run glob.glob() on the filespec
we calculate, which should be a little bit more efficient.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
meta/conf/bitbake.conf puts python2.7 into the HOSTTOOLS variable but not
python2, so only python2.7 is guaranteed. In addition, on some distros -- such
as Amazon Linux -- /usr/bin/python2 doesn't exist but python2.7 does. So, use
python2.7 for the --python= argument in the qemu configure step.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The unit test requires x11 as distro feature, otherwise it will fail
while building the test requirements.
[YOCTO #10903]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed dependency task for syslinux from do_build to
do_populate_sysroot as do_build dependency caused conflicts in
populating image recipe sysroot using conflicting recipes. This
makes do_image_wic task to fail with FileExistsError trying to
copy the same file from two conflicting recipes.
This should also speed up image creation a bit as do_populate_sysroot
task is faster than do_build.
[YOCTO #11295]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building gcc-cross-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backport the fix from upstream GCC to enable the build with GCC 7
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a fix from upstream for a -Wformat-truncation=2 warning
and implement a simple fix for a -Wimplicit-fallthrough warning.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We never need these tasks as dependencies of other sstate tasks since
they're only ever needed to build artefacts so we can always skip them
and save some time/space.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Two identical builds can end up having deploy/licenses folders
that differ. This is observed in cases where there are several
different license files of the same name in different folders,
i.e. "COPYING". In those case we have to differentiate the files
somehow and we do it via file expensions such as COPYING.0, COPYING.1.
However, which file will get which extension is presently random.
This means, for example, that COPYING.0 in one build is the same
as COPYING.1 in the other (and vice versa).
Although there is mothing wrong with this, for the sake of binary
reproducibility it is preferable to have a deterministic outcome.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WIC test case requires wic-tools which in turn depends on intltool-native and
gettext-native. However, if NLS is disable, the gettext-minimal-native is used instead
of gettext-native causing a failure on intltool-native as seen below:
checking for msgfmt... no
checking for gmsgfmt... no
configure: error: GNU gettext tools not found; required for intltool
ERROR: Function failed: do_configure (log file is located at /home/lsandov1/poky/build/tmp/work/i586-poky-linux-musl/systemd-boot/232-r0/temp/log.do_configure.7518)
ERROR: Task (/home/lsandov1/poky/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 609 tasks of which 604 didn't need to be rerun and 1 failed.
[YOCTO #10902]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The http.server module from python3-netclient imports the html module
which is in python3-html. Also xmlrpc.server imports pydoc which is a
part of python3-pydoc. But those run-time dependencies are missing
from python3-netclient and python3-xmlrpc respectively.
Add the missing run-time dependencies.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's length is usually 128 as defined in /usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
So there would be errors when /path/to/hosttools/bash is longer than 128:
/bin/sh: ./doltcompile: [snip]: bad interpreter: No such file or directory
Set ac_cv_path_DOLT_BASH to "/usr/bin/env bash" to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's length is usually 128 as defined in /usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
So there would be errors when /path/to/hosttools/perl is longer than 128.
This patch fixes the problem when POSIX_SHELL and perl are used as the interpreters.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when len(TMPDIR) = 410:
Can't exec "/bin/sh": Argument list too long at /usr/lib/perl/5.18/IO/File.pm line 65.
This is becuase it has a lot of m4 files, use relative path for them
can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when len(TMPDIR) = 410:
Can't exec "/bin/sh": Argument list too long at /usr/lib/perl/5.18/IO/File.pm line 65.
This is becuase it has a lot of m4 files, use relative path for them
can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's max length is usually 128 as defined in
/usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
So there would be errors when /path/to/hosttools/perl is longer than 128.
Set ac_cv_path_PERL to "/usr/bin/env perl" to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's max length is usually 128 as defined in
/usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
There would be errors when @PERL@ (hostools/perl) is longer than 128,
use '/usr/bin/env perl' can fix the problem, but '/usr/bin/env perl -w'
doesn't work:
/usr/bin/env: perl -w: No such file or directory
So replace "perl -w" with "use warnings" to make it work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's max length is usually 128 as defined in
/usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
There would be errors when @PERL@ (hostools/perl) is longer than 128,
use '/usr/bin/env perl' can fix the problem, but '/usr/bin/env perl -w'
doesn't work:
/usr/bin/env: perl -w: No such file or directory
So replace "perl -w" with "use warnings" to make it work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've had a lot of users running into RSS issues where -initial recipes
were being installed into sysroots alongside their counterparts and
causing overlapping files issues.
In general this was through do_build dependencies. Such dependencies are
bad in general and I'd encourage people to compare the taskgraphs with
using a more specific dependency like do_populate_sysroot, do_image_complete
or do_deploy as often the more specific dependency will result in a much
cleaner build.
Regardless, we don't want -initial dependencies getting in the way like
this and there are cases a do_build dependency could make sense.
Deleting the do_build task in these cases makes sense since this is not
a build "endpoint" we'd ever want a user to use, its a behind the scenes
piece of bootstrappping.
Unfortunately to make this work, we need a newer bitbake version which
has a bitbake bug fixed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need the bitbake bug in recrdeptask handling of missing tasks fixed in
order to apply a fix for OE-Core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids the following error when logging in to a host that does
not have the tty command:
-sh: tty: not found
Reported-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Balik <martin.balik@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The mem_get_bits_rectangle function in Artifex Software, Inc.
Ghostscript 9.20 allows remote attackers to cause a denial
of service (NULL pointer dereference) via a crafted PostScript
document.
Reference:
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-7207
Upstream patch:
http://git.ghostscript.com/?p=ghostpdl.git;h=309eca4e0a31ea70dcc844812691439312dad091
Signed-off-by: Catalin Enache <catalin.enache@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Emit CONFFILES variable in pkgdata, or else the get_conffiles function
will return 'None' for some packages instead of the expected value. This
is especially true for optional module packages.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opkg uses empty lines as separator for next package and if an ipk file was
packaged with empty lines in DESCRIPTION opkg won't be able to handle such ipk
file, this happens at execution time.
This commit will replace empty lines in DESCRIPTION with a '.' when generating
an ipk package to avoid this issue.
[YOCTO #10677]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Typically a single change cascades through the entire task dependency
chain. Developers had to figure that out themselves, based on hard to
read and interpret output (not sorted, no indention, no explanations):
$ yocto-compat-layer.py -n meta-xxxx
...
AssertionError: True is not false : Layer meta-xxxx changed signatures.
webkitgtk:do_install changed fe2edc9082bc0da98f9cb1391c52f565 -> b3a44684c5cd9aacd3f7c6ed88eefab5
gstreamer1.0-plugins-good:do_configure changed 3b2f8211be3fe08422bf6087f3af16d1 -> 7d80e42fa1f4f01ff4dfe2ea4477d382
pulseaudio:do_package_qa changed 5d0a58ada66ff17f5576555302ac319a -> 0e13bcb96143d1ae54c451bc3de0aa30
epiphany:do_prepare_recipe_sysroot changed 29e1b277dbcb005bd54950594c50d91b -> d3c45527b37677a0668ce483c6db3052
...
gst-player:do_packagedata changed 9ce6efdd357dd74919bc4957458b1e95 -> d0c083ce629f37adfc9c4ba9eff81f83
gstreamer1.0-plugins-base:do_install changed 1161cd867d15bea63e5dd5d9abf0519c -> 5bf2b652a2d77fee3eedb35af2f201a0
gstreamer1.0-rtsp-server:do_packagedata changed 6781dc3070f80b843ed1970d74dd323e -> 454620c2e3b9fea87e525d14b6ed0344
alsa-plugins:do_packagedata changed 1808c3f737cb805b169d004e948ea19c -> 480124b7fa5eab1f73bf96440d725231
Now the tool automates the problem analysis: it retrieves the depgraph
using the tinfoil API and only reports those tasks with modified
signatures whose dependencies have not changed, i.e. those tasks which
definitely introduce a change.
>From the previous example, that just leaves two tasks that need to be
checked:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
pulseaudio:do_install: 668eb1e30af129df9806b0aa0d7c10cd -> 1196bdb88eef56eeee4613bb06b9387e
This pruning might be a bit too aggressive in the sense that tasks
which inherit a change and then add more changes themselves won't be
reported initially. They will be found when fixing the reported tasks
and re-running the check.
For a developer it seems better to have something listed which
definitely is a problem and needs fixing instead of everything,
including the tasks which don't need fixes.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In commit 5b9ac62ab535d, one place was fixed where a command was
invoked such that failures caused double stack traces and stderr was
lost. The same problem also occurs elsewhere, triggered for example by
a layer with parsing problems.
Now a new utility method is used instead of repeating the code.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sending report email was not working correctly if the script was given
an html report path that contained directory components.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ntpd: NTP server denial of service flaw
CVE: CVE-2016-6301
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The DEPLOY_DIR_IMAGE maybe relative or absolute path since it can be
read from env vars, so use realpath for both imgdir and
DEPLOY_DIR_IMAGE when compare.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* "is it" -> "it is"
* Remove "<image>.qemuboot.conf =" in the error message which looked strange.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than hard-coding the tmpdir for TargetBuildProject to /tmp allow the
parent's default handling to define an appropriate tmpdir.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't hard-code /tmp as the tmpdir, instead use WORKDIR as the tmpdir if the
instantiater doesn't specify a value.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than hardcoding /tmp as the default tmpdir make a more unique tmpdir
with tempfile.mkdtemp() when the caller doesn't specify a tmpdir value.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Override RTLDLIST for nativesdk, or else ldd would fail to run on
SDK targets.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The configuration change was already done for -native but
we really want it when USE_NLS is set.
Fixes [YOCTO #11285].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
EXTRA_OEMAKE no longer contains '-e MAKEFLAGS=' so the comment
explaining that it needs to be removed / over-ridden is obsolete.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The md5sum & sha256sum for ethtool-4.8.tar.gz have changed upstream :(
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The recipe being tested (devtoo-test-patch-gz) by devtool has dependencies (at
least libxres and virtual/libx11) that cannot be built with poky-tiny distro so
skip the test for this particular policy.
[YOCTO #10891]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The library libxml2 can provide its own bindings for python2 in addition
to the third party python-lxml and python3-lxml packages if this
functionality is enabled in PACKAGECONFIG.
But in case the functionality is disabled there's no need to depend
on python2.
Make the dependency on python2 enabled only if the python feature
is added to PACKAGECONFIG. Also add missing run-time dependency on make
to libxml2-ptest.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This release includes fixes for Windows/Mingw support.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
NASM is a x86-specific assembler so it is only required when building for x86
targets. Use x86-architecture and class-target overrides to depend on NASM, but
explicitly disable and don't depend on it for native as complications in the
native overrides meant NASM was enabled for x86-64 but disabled for x86 (this
will be investigated later).
Original patch by Tristan Van Berkom <tristan.vanberkom@codethink.co.uk>, more
work to solve selftest failures by Richard Purdie
<richard.purdie@linuxfoundation.org>. I just wrote a nice commit message.
Also fix some missing whitespace in _appends.
[ YOCTO #11240 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently some shebang lines end up as
#! /usr/bin/env perl -w
env does not like the argument. Also the current sed to insert env
does not cover the copies ptests use. Fix these issues by:
- using --with-perl to insert "env"
- Replacing "-w" in shebang lines with a new "use warning;" line
Remove a EXTRA_OECONF_append_class_target from the native recipe.
Don't overwrite EXTRA_OECONF in native: the values should be correct
for native as well.
--with-patch is used within the gnu patch wrapper only: before this
commit the wrapper contained a (build host) path to native patch.
Also tweak one test so busybox mv output is accepted.
All ptests should now pass: Fixes [YOCTO #11221].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using `wic create mkefidisk -e core-image-minimal', the following
error message appeared.
Please bake it with 'bitbake parted-native' and try again.
However, following this command doesn't do any help. The same problem
still appeared.
The problem is that when we 'bitbake parted-native', it doesn't have
anything to do with core-image-minimal. And the required tool 'parted'
is not under core-image-minimal's recipe-sysroot-native directory.
Improve the error message so that following it could get things done.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
FIEMAP API is not supported by tmpfs file system, but
SEEK_HOLE/SEEK_DATA is supported.
Returned back FilemapSeek class that implements support
of SEEK_HOLE/SEEK_DATA API to make sparse_copy API working
on tmpfs again.
This reverts commit 6b80c13f7a82a312a3b981de5a56c66466ba1fac.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ming Liu
Paul Eggleton
Martin Kelly
Leonardo Sandoval
Ed Bartosh
Joshua Lock
Richard Purdie
Juro Bystricky
Dmitry Rozhkov
Martin Jansa
Robert Yang
Peter Kjellerstedt
Martin Balik
Catalin Enache
David Vincent
Mariano Lopez
Patrick Ohly
Markus Lehtonen
Andrej Valek
Jussi Kukkonen
Andre McCurdy
Paul Barker
Philip Balister
Ross Burton
Chen Qi