| Age | Commit message (Collapse) | Author |
|---|
|
Usually, the initramfs' maxsize can be 1/2 of ram size since modern
kernel uses tmpfs as initramfs by dafault, and tmpfs allocates 1/2 of
ram by default at boot time, which will be used to locate the initramfs.
Set INITRAMFS_MAXSIZE to 131072K (128M) by default (ram 256M), the
initramfs is small usually, for example, core-image-minimal-initramfs is
about 21M (uncompressed, 17M * 1.3) by default, but if the user add a
lot pkgs to initramfs, we can error and stop to let the user know ealier
rather than fail to boot (e.g., OOM-killer) at boot time.
Please see the bug for more info:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5963
[YOCTO #5963]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Weston needs wayland-scanner which comes from wayland-native. Add the missing
dependency to avoid build failures from:
bitbake wayland; bitbake wayland-native:do_clean weston:do_cleansstate; bitbake weston
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently this code installs into the standard sysroot, however this causes
some conflicts when linking since the linker can look specifically for
versioned .so files (e.g. like libpthreads.so.0). This breaks builds
of util-linux-native for example.
The easiest solution is to install uninative into its own separate sysroot.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_stage was obsoleted years ago, drop the test now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xz is slow at compressing the SDKs, we can speed it up by using the
parallel compressor, pixz.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core rev: f2b64f725803ad8be7c2876c531e057a4fe5ca7c (poky
1362986886cc96c8cc11fb60795f729b41770414) unintentionally broke opkg/dpkg
multilib support within the SDK by making things not honour
self.install_order. This reinstates that code for opkg/dpkg but
not rpm where the original problem was.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Originally, the idea was that the init environment would handle
fetching or providing the binary shim that uninative needs.
This turns out to be ugly, especially when you consider proxy
environments and so on getting involved. Instead, lets therefore
support our fetcher which already handles all this.
The distro is expected to setup configuration like:
UNINATIVE_URL ?= "http://mydomain/mypath/"
UNINATIVE_CHECKSUM[i586] =
"md5sum1"
UNINATIVE_CHECKSUM[x86_64] = "md5sum2"
and then it should all work if the user inherits the uninative class.
This patch also improves the error handling in the class to give more
user readable error messages.
If the shim binary is already provided, the system will just use that
and ignore the url information.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xz gives better compression results than bzip/gz but is often slower.
Using parallel compression mitigates this somewhat and is particularly
useful for the SDK.
Whilst xz does have some parallel support, pixz appears to perform better
and supports parallel decompression as well as a simpler command line.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
At some point we may want to add xz-native to ASSUME_PROVIDED. This
allows that to work whilst still allowing access to liblzma for
those things which need it (e.g. pixz).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This prevents an error in do_populate_sdk when building
buildtools-tarball with ipk as the package manager:
Exception: UnboundLocalError: local variable 'pkg' referenced
before assignment
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I was a little bit hasty in OE-Core revision
c2cc5abe34169eae92067d97ce1e747e7c1413f5 - it turns out BitBake's
fetcher code is not consistent in whether it logs something useful or
not; when fetching from an http URL it does but with a git repository
it doesn't. In advance of any major reworking of fetch error handling in
BitBake, let's just print the text of the exception and then we know we
have shown something to the user.
Additionally, we were only catching FetchException here but there are
several other classes of exception that the fetcher can raise (e.g.
MalformedUrl); catch the parent BBFetchException class instead so we
avoid tracebacks for those other classes as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the URL ends in a / then we want to strip that off the path we split
out of the URL before calling os.path.basename() on it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI rather than leaving it blank in the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
source
Sometimes you don't want to build an entire project, just a subdirectory
of it; add a --src-subdir option to make that easier. (We still look for
a single subdirectory in what gets unpacked, e.g. what you might find
within a tarball, so whatever you specify with this option is added onto
the end of that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Quoting is optional in CMakeLists.txt and is occasionally used, so strip
out quotes if they are present.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When constructing the sstate-cache directory for the extensible SDK,
we were copying in any matching native sstate packages, and as the
signature doesn't actually change when the distro changes (since
NATIVELSBSTRING is just a path separator for the artifacts and is not
part of the signature) we ended up copying duplicated packages when the
distro changed e.g. upon host distro upgrade. Only search in the
NATIVELSBSTRING-named subdirectory for native packages and the issue
goes away.
Fixes [YOCTO #8885].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if xz isn't installed when installing the SDK you get an error
from tar and then the SDK installation continues, cascading into a load
of other failures since files are missing. Add a check to see if xz can
be run and error out if it can't, and also exit if tar fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the script files we use to construct the SDK installer change then
that really ought to trigger re-execution of the do_populate_sdk(_ext)
task, so add file-checksums varflags to ensure that happens.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
At the end of the extensible SDK installation, if we've successfully
prepared the build system then we don't need ext-sdk-prepare.py. I had
thought earlier that this would be used when updating, but a different
mechanism was needed there so this script isn't used for that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the ability to install additional pre-built items (from shared
state) into the extensible SDK. This can already be done implicitly by
adding something to DEPENDS within a recipe you're working on and then
running "devtool build", but it's useful to be able to explicitly
install things particularly if you're using the extensible SDK as a
traditional toolchain.
Note that for this command to be useful you need to have SSTATE_MIRRORS
set in your SDK configuration, and that mirror needs to be populated
with sstate artifacts for recipes you wish to be able to install.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the following improvements to the SDK update process:
* Use a manifest file with sha256sums to track files other than sstate
and metadata that we need to update - e.g. conf files. This allows us
to handle where files such as auto.conf may or may not be present,
as well as the configuration changing without affecting task signatures
- we still want the config files copied in that case rather than it
saying nothing needs to be done.
* Write the SSTATE_MIRRORS_append to site.conf rather than local.conf
so that local.conf remains static (since we don't want to trigger an
update every time). Also, If there is an SSTATE_MIRRORS value already
set in the configuration we can skip this and assume it contains the
needed packages.
* Allow the update process to be run in any directory, don't assume
we're already at the base of the SDK
* Where practical, fetch remote files into a temporary location and
then move them to the desired location at the end, to avoid a
failed update leaving the SDK in a broken state.
* Update all installed do_populate_sysroot / do_packagedata tasks
instead of using the SDK targets. This ensures any item installed
through dependencies after installation (e.g. when running
"devtool build") won't go stale.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Use tempfile.mkdtemp() instead of hardcoding temp dir
* Set a variable early for the temp locked sigs file and use that
everywhere
* Delete the temp dir at the end
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you run devtool build, you need to have the pkgdata written out at
the end, so that if what you're adding is a library and the next thing
you add is something that depends on that library, the necessary
information to map the dependency back to the recipe is present. In
practical terms all this means is we need do_packagedata to run in
addition to do_populate_sysroot.
This does mean that do_package needs to run which wasn't running before,
and that means that the few package QA tests that run within do_package
such as installed-vs-shipped will now be run. This may be a bit
bothersome, and prompted a fix for one of our oe-selftest tests as a
result, but I don't see an easy way around it. Ultimately if you care
about using the recipe in an image you'll need to fix any such errors
anyway.
Fixes [YOCTO #8887].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a variable SDK_INCLUDE_PKGDATA which you can set to "1" to include
pkgdata for all recipes in the world target. There are a couple of uses
for this:
1) If you use "devtool add" to add a recipe that builds something which
depends on anything in world, the dependency can then be correctly
mapped to the recipe providing it and that recipe can be added to
DEPENDS, since we have the pkg-config and shared library dependency
data within pkgdata.
2) You'll be able to search for these recipes and any files they
package for the target with "devtool search" since that also uses
pkgdata
This of course assumes you've tailored world through EXCLUDE_FROM_WORLD
to only include recipes you'd want built in your distro, but I think
that's a reasonable assumption; failing that there is a
WORLD_PKGDATA_EXCLUDE variable that you can set to exclude any recipes
you don't want.
Note that this patch relies on functionality implemented in a recent
BitBake patch and will not work without it.
Implements [YOCTO #8600].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These patches have revealed issues with linux kernel headers which has
been proposed upstream but hasnt been applied yet
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gettext.m4 macro does not detect musl triplets and falls back to
${libdir}/locale
It ends up with lot of packging warning
"files installed but not packaged"
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
base ld is used during link phase and since its x86 so it
works mostly, however it can cause problems depending upon
build host. During cross build we should use cross linker
Fixes errors e.g.
ld -shared -m elf_i386 --hash-style=gnu -T
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/work/i586-oe-linux/syslinux/6.03-r0/syslinux-6.03/com32/lib/i386/elf.ld
-soname libcom32.c32 -o libcom32.elf zlib/adler32.o zlib/compress.
o zlib/crc32.o zlib/uncompr.o zlib/deflate.o zlib/trees.o zlib/zutil.o
zlib/inflate.o zlib/infback.o zlib/inftrees.o zlib/inffast.o sys/zfile.o
sys/zfopen.o libpng/png.o libpng/pngset.o libpng/pngget.o
libpng/pngrutil.o libpng/pngtrans.o
libpng/pngwutil.o libpng/pngread.o libpng/pngrio.o libpng/pngwio.o
libpng/pngwrite.o libpng/pngrtran.o libpng/pngwtran.o libpng/pngmem.o
libpng/pngerror.o libpng/pngpread.o jpeg/tinyjpeg.o jpeg/jidctflt.o
jpeg/decode1.o jpeg/decode3.o jpe
g/rgb24.o jpeg/bgr24.o jpeg/yuv420p.o jpeg/grey.o jpeg/rgba32.o
jpeg/bgra32.o pci/cfgtype.o pci/scan.o pci/bios.o pci/readb.o
pci/readw.o pci/readl.o pci/writeb.o pci/writew.o pci/writel.o
sys/vesacon_write.o sys/vesaserial_write.o sys/ve
sa/initvesa.o sys/vesa/drawtxt.o sys/vesa/background.o
sys/vesa/alphatbl.o sys/vesa/screencpy.o sys/vesa/fmtpixel.o
sys/vesa/i915resolution.o syslinux/reboot.o syslinux/keyboard.o
syslinux/version.o syslinux/pxe_get_cached.o syslinux/pxe_get_nic.o
syslinux/pxe_dns.o syslinux/video/fontquery.o
syslinux/video/reportmode.o syslinux/addlist.o syslinux/freelist.o
syslinux/memmap.o syslinux/movebits.o syslinux/shuffle.o
syslinux/shuffle_pm.o syslinux/shuffle_rm.o syslinux/bios$oot.o
syslinux/zonelist.o syslinux/dump_mmap.o syslinux/dump_movelist.o
syslinux/run_default.o syslinux/run_command.o syslinux/cleanup.o
syslinux/localboot.o syslinux/runimage.o syslinux/loadfile.o
syslinux/floadfile.o syslinux/zloadfile$o syslinux/load_linux.o
syslinux/initramfs.o syslinux/initramfs_file.o
syslinux/initramfs_loadfile.o syslinux/initramfs_archive.o sys/libansi.o
sys/gpxe.o atexit.o onexit.o abort.o
| ld: zlib/deflate.o: unrecognized relocation (0x2b) in section `.text'
| ld: final link failed: Bad value
| make[4]: *** [libcom32.elf] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This issue has been seen in multiple times e.g.
http://patchwork.openembedded.org/patch/103083/
https://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg72513.html
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Clang finds overflows when comparison is done between an unsigned char
and a integer constant. So explicitly typecast the constant before
comparison
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Define _POSIX_C_SOURCE if not defined
Add sockaddr_un* to sockaddr* typecast to make compiler happy
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Configure looks for error_t in errno.h and musl does not define error_t
if its not defined then configure emits a definition to be used, now we
also use standalone argp implementation from glibc on musl based systems
which defines this in argp.h as well so now we have it defined twice
and errors like
|
/a/builder/mnt/build-oe/tmp-musl/sysroots/raspberrypi2/usr/include/argp.h:40:13:
error: cannot combine with previous 'int' declaration specifier
| typedef int error_t;
| ^
| ../config.h:257:17: note: expanded from macro 'error_t'
| #define error_t int
| ^
| 1 error generated.
are seen. argp.h definition is conditional on __error_t_defined which is
true here so lets define it on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
It did differentiate on features in libc but assumed always glibc
this patch make that assumption clear
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
changes are here
http://mailman.uclibc-ng.org/pipermail/devel/2016-January/000665.html
Drop upstreamed patch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
needs a rpc implementation
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
strol_l is not available on musl
delete charset.alias as well its not needed
Use internal gc function on musl
We get errors on certain functions not being available in boeheme gc
when built with musl. Therefore use the internal versions
e.g.
Undefined gc_set_finalizer_notifier
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Its used in several packages
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
We have rootfs intercepts which fail on musl because ld.so on musl is an
absolute symlink to /usr/lib/libc.so and then it fails to load when run
with qemu user mode.
Fixes rootfs failures like
WARNING: The postinstall intercept hook 'update_pixbuf_cache' failed
(exit code: 255)! See log for details!
WARNING: The postinstalls for the following packages will be postponed
for first boot: libgdk-pixbuf-2.0-loader-jpeg li
bgdk-pixbuf-2.0-loader-png libgdk-pixbuf-2.0-loader-gif
libgdk-pixbuf-2.0-loader-xpm
WARNING: [log_check] core-image-sato: found a warning message in the
logfile (keyword 'WARNING:'):
[log_check] WARNING: The postinstall intercept hook
'update_pixbuf_cache' failed (exit code: 255)! See log for details!
WARNING: [log_check] core-image-sato: found a warning message in the
logfile (keyword 'WARNING:'):
[log_check] WARNING: The postinstalls for the following packages will be
postponed for first boot: libgdk-pixbuf-2.0-lo
ader-jpeg libgdk-pixbuf-2.0-loader-png libgdk-pixbuf-2.0-loader-gif
libgdk-pixbuf-2.0-loader-xpm
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
pass --hash-style explicitly to linker
and ensure that mips does not use gnu hash style
This inoculates fts when compiler does not pass
hash style option e.g. clang
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
enable largefile support if its in DISTRO_FEATURES
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
nss's build system assumes that cdefs.h is always available on linux
which is not the case with musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Fix error like below
| apmd.c:372:41: error: use of undeclared identifier '__WCOREFLAG'
| status = __W_EXITCODE(0, SIGTERM) | __WCOREFLAG;
| ^
| apmd.c:392:41: error: use of undeclared identifier '__WCOREFLAG'
| status = __W_EXITCODE(0, SIGTERM) | __WCOREFLAG;
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
parallel build patch was removing dependencies on .c files mistakenly
just adding src/yacc_config.h to dependencies in existing rule should
have fixed the original build race
include sys/types.h in lex_config.l for getting u_long definition
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Fixes errors e.g.
vmcore-dmesg/vmcore-dmesg.c:370:32: error: unknown type name 'loff_t'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
systemd on musl doesn't yet work even though we have patches to make it
compile it fails to run, therefore lets skip building it for now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Doesnt build with musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
let musl depend on these headers so they are staged along with libc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
Robert Yang
Richard Purdie
Joshua Lock
Paul Eggleton
Khem Raj
Ross Burton