Age | Commit message (Collapse) | Author |
|
If the git version is 1.7.9.5, then 1795 is bigger than 210 which causes
errors like:
fatal: No such ref: :rbt/bash
fatal: Needed a single revision
ERROR: git request-pull reported an error
Use the first 3 numbers to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pkg-config was skipping every other link flag due to a list manipulation bug,
backport a commit from git to fix this.
This will stop users of zlib.pc from inserting the sysroot directory indirectly
into builds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The LDFLAGS are not generally useful with pkg-config and mean that the .pc file
contains references to the sysroot directory, so remove it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes bug 6933
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test added verifies that when a file with an absolute path in
LIC_FILES_CHKSUM changes without a corresponding change to the md5sum,
it triggers the license qa test again with a failure.
[Yocto #6450]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, files with absolute paths in LIC_FILES_CHKSUM such as
"file://${COMMON_LICENSE_DIR}/foo" would not result in a qa failure
when the license file changed.
To fix this problem, add any files with absolute paths from
LIC_FILES_CHKSUM to the file-checksums varflag, so that changes in the
license file are detected and cause the qa task for licenses to run.
[Yocto #6450]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
${bindir} and ${base_bindir} may be the same. If they are don't try and
move files onto themselves.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The libltdl libraries are put in libltdl-* packages, but libltdl.la
is packaged in libtool-dev. This change puts libltdl.la in libltdl-dev
package instead of libtool-dev.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The condition should be uclibc 'or' musl then we know its not glibc
right now it checks with 'and' operator, that condition will never be
true
Change-Id: Ifc48e81fd0b3c18d8e1ef76a18c216dc6acda092
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1301822.html
libgpg-error FTBFS when built with gcc-5. Here is the relevant excerpt:
| Making all in src
| make[4]: Entering directory '/tmp/buildd/libgpg-error/libgpg-error-1.17/src'
| gawk -f ./mkstrtable.awk -v textidx=3 \
| ./err-sources.h.in >err-sources.h
| gawk -f ./mkstrtable.awk -v textidx=3 \
| ./err-codes.h.in >err-codes.h
| gawk -f ./mkerrnos.awk ./errnos.in >code-to-errno.h
| gawk -f ./mkerrcodes1.awk ./errnos.in >_mkerrcodes.h
| gcc -E -D_FORTIFY_SOURCE=2 _mkerrcodes.h | grep GPG_ERR_ | \
| gawk -f ./mkerrcodes.awk >mkerrcodes.h
| rm _mkerrcodes.h
| gcc -I. -I. -o mkerrcodes ./mkerrcodes.c
| In file included from ./mkerrcodes.c:26:0:
| ./mkerrcodes.h:9:5: error: expected expression before ',' token
| { , "GPG_ERR_E2BIG" },
| ^
It makes invalid assumptions on undefined behaviour of gcc. To see why,
let us look at the contents of the intermediate steps:
_mkerrcodes.h (deleted):
| ...
| #ifdef E2BIG
| E2BIG GPG_ERR_E2BIG
| #endif
| #ifdef WSAE2BIG
| WSAE2BIG GPG_ERR_E2BIG
| #endif
| ...
gcc -E -D_FORTIFY_SOURCE=2 _mkerrcodes.h | grep -v '^$':
| ...
| # 26 "_mkerrcodes.h" 2
| 7
| # 31 "_mkerrcodes.h"
| GPG_ERR_E2BIG
| # 37 "_mkerrcodes.h" 3 4
| 13
| # 37 "_mkerrcodes.h"
| GPG_ERR_EACCES
| ...
As can be seen here, the cpp from gcc-5 can split lines and "grep
GPG_ERR_" fails to account for that.
Change-Id: I6f1476e4afc7163ebc3a05106ceaa3b83e3fab3e
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support for skipping the beginning of a file with the rawcopy
plugin.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The fsimage plugin allows to add an already existing filesystem image in
the partition layout.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit 0a6668f6e60b4195ff4163c00fc972bacdb27b4b still included some
debug and is not working properly as the new fstab is generated too
late.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If 'networkd' is enabled in PACKAGECONFIG, the do_install variable cannot
be correctly expanded. Error message is like below.
Failure expanding variable do_install: ShellSyntaxError: LexToken(Fi,'fi',0,0)
followed by:
LexToken(NEWLINE,'\n',0,0)
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gcc-source don't do do_package_write_rpm, so we should set
PACKAGES = "" to avoid the building error if we want generate srpm,
otherwise, we get the error as below.
ERROR: Task do_deploy_archives in meta/recipes-devtools/gcc/gcc-source_4.9.bb \
depends upon non-existent task do_package_write_rpm in \
meta/recipes-devtools/gcc/gcc-source_4.9.bb
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
oe.utils.both_contain() just does a find() on the value
rather than splitting the value and then looking in the
list of split items. The result is that if you add a
feature to MACHINE_FEATURES that itself has a substring
that matches one of the values looked for when building
COMBINED_FEATURES, you end up with an incomprehensible
error (here with "ext2i" in MACHINE_FEATURES):
ERROR: Nothing RPROVIDES 'packagegroup-base-ext2'
(but /home/balister/src/oe-core/oe-core/meta/recipes-core/
/packagegroups/packagegroup-base.bb RDEPENDS on or otherwise requires it)
Fix [YOCTO #6888].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new send-error-report will prompt for review of items and the server is
now specified by using the -s argument.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- Add arguments to allow for non-prompted sending, json encoded response
and link backs.
- Add feature to check the server's max_log_size
- Add feature to allow reviewing of the final data
- Be a bit more helpful if the expected fields aren't filled in instead
of exiting.
- Remove the redundant urlencode
- Add a user-agent so that the server can identify the encoding method.
- Remove custom proxy handling - urllib should 'just work'
[YOCTO #6736]
[YOCTO #7245]
[YOCTO #7105]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* it's not complete, but recipes depending on virtual/libx11 are easiest
to spot, I've long list of PNBLACKLIST for all recipes which cannot
be built in distro without x11 in DISTRO_FEATURES
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For further details, see:
https://bugreports.qt.io/browse/QTBUG-44547
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- man-1.6e-whatis2.patch does not delete the tail "fi"
fix it to avoid syntax error
- Use the command "which" to get the path of awk
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If PAM isn't enabled then systemd-tmpfiles on boot will fail to start with the
following error message:
Failed to copy files to /etc/pam.d: No such file or directory
This is because systemd-tmpfiles is attempting to build a usable /etc from the
skeleton in /usr/share/factory but pam.d isn't present because PAM is disabled.
Fix this by not attempting to copy pam.d in non-PAM configurations.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Yadif generates bad assembler when the x32 tune is enabled:
gst/yadif/yadif_template.c:244: Error: `(%edx,%r11)' is not a valid base/index expression
This should be fixed upstream but until then we can disable the Yadif
plugin if x32 is enabled.
[ YOCTO #7385 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The check is supposed to be for -Os, but it's actually testing -O0.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Whilst Sato still uses GTK+ 2 we don't want the overhead of building both GTK+ 2
and GKT+ 3. Luckily gtk-play is a simple application and it's just a small
patch away from building with GTK+ 2.
When Sato is ported to GTK+ 3 (the mythical Shuku proposal) this patch can be
removed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the SRCREV for the following incremental improvement in patch
processing time:
kgit-meta: skip patches on non-leaf nodes
In a similar way as commit 0768d697 [kgit-meta: dont run kgit-s2q
for
non-leaf nodes], we can save even more processing time by not even
analysing and linking patches if we aren't on the leaf node of the
tree.
This early exit can save nearly 95% of the time required to "patch"
a tree when no changes are actually applied.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With these SRCREV updates, we add the following support to the kernel:
The following has been verified with the branch sources:
On 68xx:
* SGMII, XAUI Packet IO interfaces.
* PCIe devices
* EHCI/OHCI USB driver
On 78XX:
* Ran LTP testsuite
* SGMII, XAUI Packet IO interfaces
* MMC driver (which covers GPIO interrupts in the driver)
* PCIe devices
* XHCI USB driver
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't require that a yocto custom kernel + defconfig have a full BSP
description (but of course it would be better if they did). Since this
isn't a requirement, we shouldn't alarm users by generating a BSP
description warning.
To implement this, we add a bsp audit level flag (like the one that
exists for kconfig audits), and only set it to activate in the versioned
linux-yocto recipes.
[YOCTO: #7370]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During the 3.19 update a 32 bit option in the 64 bit config was missed,
which results in the option being dropped (and reported as a warning):
Value requested for CONFIG_PCI_GOANY not in final ".config"
Requested value: "CONFIG_PCI_GOANY=y"
Actual value set: ""
So we split the 32bit only drivers out of the common driver include and
the problem goes away.
[YOCTO: 7354]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous fix for this issue was incomplete. We also need to change
the source file to avoid this error. Grepping the build directory for boost
will show the issue when building taglib after boost has been built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These recipes both fail to build with "relocation R_X86_64_PC32 against
undefined hidden symbol `__init_array_start' can not be used when making a
shared object" when using PIE.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gstreamer1.0-plugins-ugly is protected by the "commercial" LICENSE_FLAGS, so
only recommend it if those licenses are enabled.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd has optional support for xkbcommon (verify keymaps when locale changes)
and iptables (configure NAT rules).
Add PACKAGECONFIG options for these, disabling iptables by default and
respecting the X11 DISTRO_FEATURE for libxkbcommon (as the code involves X11
keymaps).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This dependency accidently disappeared in the 219 upgrade, so add it back.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The testapps packagegroup was the only user of owl-video, and now that has been
replaced by gst-player this can be deleted.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
owl-video is a bad video player that doesn't work very well, use gst-player
instead for testing.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gtk-play binary is packaged in gst-player-bin...
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Forces the creation of a configure script for ctypes/libffi Module
by calling autoreconf after it being deleted on do_configure().
Fixes configuration hence compilation of this Python module.
[YOCTO #7373]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
os.walk() returns symlinks to directories in the "dirs" lists, but then never
enters them by default. As a result, the old code applied neither the
directory handling (because that is active once a directory gets entered) nor
the file handling, and thus never packaged such symlinks.
The fix is simple: find such special directory entries and move them to the
"files" list. However, one has to be careful about the undefined behavior of
modifying a list while iterating over it.
This fix was required for packaging a modified base-files that created
symlinks into /usr for /sbin /lib and /sbin.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libpcap was not previously installing a pkg-config file. Add a basic one
that will allow using 'pkg-config --libs libpcap', for example, in recipes
rather than 'pcap-config', which frequently returns incorrect information.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
219 has been in the docks for sometime, the older patch got merged
this patch is now upgrading 218 to 219
Make all patches using git
Change-Id: Ib0350144592aba26cad56c13c9a5522515915c58
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License checksums changed due to year change
- Copyright (C) 2003, 2004, 2010, 2013, 2014 g10 Code GmbH
+ Copyright (C) 2003, 2004, 2010, 2013, 2014, 2015 g10 Code GmbH
Change-Id: I870446796cf9ffe3acae7aeeac2d96d6305d4186
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Gaku was buggy and use GStreamer 0.10, gst-player is less buggy and uses
GStreamer 1.x.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Gaku media player was always a bit incomplete and had some serious bugs.
gst-player doesn't have these bugs, is maintained, and uses GStreamer 1.x.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|