| Age | Commit message (Collapse) | Author |
|---|
|
LIC_FILES_CHKSUM has changed with the introduction of a BSD-3-Clause
algorithm (curve25519-donna); this has prompted a re-evaluation of the
LICENSE value which should now reflect the licenses declared in the
upstream documentation. Thanks to Beth Flanagan for helping with this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When the ptest distro feature is disabled, a ptest directory is still
created in the install phase, This directory is not cleaned up or
consumed by any package and will throw a QA error, e.g.
ERROR: QA Issue: glib-2.0: Files/directories were installed but not
shipped
/usr/lib/glib-2.0/ptest
ERROR: QA run found fatal errors. Please consider fixing them.
ERROR: Function failed: do_package_qa
This is caused by the do_install_ptest_base[cleandirs] attribute which
is not setup to be conditional on ptest being enabled.
This patch refactors the use of PTEST_ENABLED in the *ptest_base tasks,
replacing the conditional execution with the removal of the tasks from
the build, this prevents any part (including cleandirs) of the ptest
tasks from executing when disabled.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Do also check systemd_unitdir/system/ for available unit files.
This was hiding dnsmasq.service for us, as /etc/systemd/system has
priority over systemd_unitdir/system...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When checking that no services have failed to start, actually wait for services
to finish starting by waiting for there not be no units in the "activating"
state.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
With a complex PS1 setup, PS1 might not have all characters correctly escaped
when terminal.bbclass writes the export. This caused the run.do_terminal.PID to
terminate, making it impossible to use the devshell.
As the spawned shell will parse e.g. .bashrc (or whatever rc-file is being
used), PS1 will be reset in the devshell.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since ca86603607a69a17cc5540d69de0e242b33382d3 we are now calling stat() on
all the pkgfiles[] during emit_pkgdata(). If symlink snapping has removed
some of the files then we will blow up trying to stat a path that no longer
exists. Fix that by ensuring that pkgfiles[] is updated when we process the
list of library renames.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because
gnu-config-native's gnu-configize script uses perl modules from autoconf
and hence doesn't work unless autoconf-native is staged (which it may
not be if building from sstate).
Ideally g-c-n would itself declare a dependency on autoconf-native but this
is difficult to arrange without creating a dependency loop. autoconf-native
already depends on gnu-config-native (because autoreconf invokes gnu-configize)
and has a build dependency on m4-native, which in turn build-depends on g-c-n
because it configizes itself by steam in do_configure and needs config.{guess,sub}
to be available. Adding some sort of gnu-config-initial-native recipe would
fix the latter problem, but this would be ugly because it would need special-casing
in (at least) autotools.bbclass, and in any case this still wouldn't solve
the problem of autoconf itself depending on g-c-n.
So, the easiest solution to the problem at hand is to arrange for those
few recipes that depend on g-c-n but not autoconf-native to gain that
latter dependency as well.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During rootfs construction, image.bbclass will call depmod after all the
modules are installed. There's no need to run it from the postinst when
operating in offline root mode.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Although libsoup did use to support direct usage of libproxy, it hasn't
done so for some time. Worse, if libsoup depends on libproxy then it
is impossible to build libproxy against webkit since webkit itself
depends on libsoup in some configurations. Fix this by removing the
extraneous entry from DEPENDS.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoids it's auto-detected from sysroot, which will lead implicit results.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The qemu tarball ships some extraneous .git metadata in the dtc/ and pixman/
subfolders, containing a reference to the path "../.git/modules" which
doesn't exist. The presence of these files will confuse git if it happens
to recurse into the qemu source folder during an operation on some parent
directory, for example "git clean" at a higher level. Avoid that problem
(mostly) by removing them immediately after the sources are unpacked.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In
commit 10cdd66fe800cffe3f2cbf5c95550b4f7902a311
Author: Ming Liu <ming.liu@windriver.com>
Date: Thu Jul 18 10:04:22 2013 +0800
libpam: add a new 'nullok_secure' option support to pam_unix
'null_ok_secure' option was fixed. Since that commit 'su' stopped working in
pseudo terminals (created in X environments) for root-accounts with empty
password.
Background: The PAM configuration for 'su' includes 'common-auth' which uses
'nullok_secure' option for pam_unix.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Install beecrypt test suite and run it as ptest.
Make all ptest pass.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This release includes the fix for CVE-2013-6462, as well as other security
hardening and code cleanups.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Install tcl test suite and run it as ptest.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch
file no longer needed, included in upstream.
qemu-native tested on all architectures,
host machine is Ubuntu Linux 13.10 x86-64.
Basic X11 and networking tests performed.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
For FHS compliance, create symbolic links to write variable data
to standard paths
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
All patches against libarchive in oe-core appear to be merged into the latest
release. The license checksum has changed because a couple of referenced files
have been renamed but there is no change to the license terms themselves.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
do_package doesn't exist and are noexec anyway for native/cross/crosssdk
packages.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Unpacking an src.rpm uses rpm2cpio.sh, which requires 'file'.
Without this, builds of rpm on a host without 'file' installed will fail with
very strange messages.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch mainly aims to add optimisation for crosssdk setscene dependency
validating which we haven't handled in current logic, and which I think we
could have as we've already implemented to native/cross, although there
are albeit not many crossdk tasks, we could still get some performance
enhancement.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Further features added to various
Android HALs (Core, Socket, PAN and HID).
Bug fixes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for Apple Siri specific Handsfree commands.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bluez-fix-compilation-on-big-endian-systems.patch removed,
included in upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe used an old version of the debian update patchset from Lenny which
does not exist anymore on Debian's FTP servers. Update to the latest set
version 4.0.3-14 which also includes some minor bug fixes and security updates.
Cleanly builds and runs in our armv7a-vfp-neon environment.
Signed-off-by: Kevin Baker <kbaker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The depenency on guild-native and libatomics-ops is missing
in multilib build, fix the depends with class-target.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* bluetooth.h is autodetected from sysroot and influences 2 python files:
/usr/include/python2.7/pyconfig-32.h
/usr/lib/python2.7/lib-dynload/_socket.so
* it doesn't link with bluez, so it wasn't detected by
test-dependencies.sh, but still causes undeterministic builds and
should be fixed
* we can use PACKAGECONFIG, but I don't expect many people to use bt
support in python-socket
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes a build error with recent Xorg libs
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Two patches are not needed anymore, because the changes are
already upstream.
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The package might be empty while pthread functions are being provided by
libc, so we need set ALLOW_EMPTY with it or it will break do_rootfs task.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Many SysV init scripts need the /etc/init.d/functions script. But
this script is part of the initscripts package. As a result, the
initscripts package should always be installed into the system to
avoid errors when starting daemons. However, it makes no sense to
install the initscripts package into a systemd based image, because
what the init scripts provide has already been provided by the systemd.
On the other hand, the functions script might be still needed in a
systemd based image because other init scripts such as distcc might need
it.
The above situation leads to a natural separation of the functions script
from the initscripts package. And this patch does so. It separates the
functions script into initscripts-functions packages.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 84fa245b1d1e7935094e3b8a452d69461dc3dcbb.
Ross Burton comments that:
*Some* packages have migrated away from gconf to gsettings. Not all
packages have done this, so anything still using gconf is now broken.
Note that almost nothing in oe-core uses gsettings as we're still
using the GTK+ 2 stack generally.
The problem is that people are using gnome.bbclass which is a kitchen
sink class, inheriting many other classes that may or may not be used.
To resolve this warning gnome.bbclass should extend the sanity check
whitelist with --disable-schemas-install as it is the class causing
gconf.bbclass to be inherited on recipes that don't use gconf.
|
|
Create the C++ library for db. This library is packaged in a new
package so the db package only contains the c library. This prevents
existing users from adding libstdc++ to the package DEPENDS.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Douglas Geiger <doug.geiger@bioradiation.net>
Signed-off-by: Steve Arnold <esteve@gentoogeek.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Install quilt test suite and run it as ptest.
Exclude delete.test and mail.test.
delete.test need execute with normal user and mail.test need depend
on mail agent, else these test cases will fail. So exclude them order
to make ptest all pass.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Run a python script on the target
1)checks the output.
2)Call os.system method create a testfile
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Paul Eggleton
Nathan Rossi
Anders Darander
Phil Blundell
Ross Burton
Ming Liu
Andreas Müller
Chong Lu
Chen Qi
Trevor Woerner
Irina Patru
Cristian Iorga
Yasir-Khan
Paul Barker
Upgrade Helper
Christopher Larson
Kevin Baker
Jackie Huang
Martin Jansa
Koen Kooi
Cristiana Voicu
Richard Purdie
Philip Balister
Ting Wang