aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-08-11weston: improve parallel make race fixesRoss Burton
The original fix is upstream already so mark as a backport, and update the patch with another race fix. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11bootchart2: update to 0.14.7Alexander Kanavin
Drop bootchartd-no-bashism.patch as it's been merged upstream Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11mesa-demos: Fix dependency for 'vg' supportOtavio Salvador
The 'vg' support should depends on virtual/libopenvg. There is no provider for libvg in OE-Core so this option seems untested being safe to change. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-09bind: upgrade to 9.10.2-p3Roy Li
9.10.2-p3 includes the fix for CVE-2015-5477: BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09recipeutils.py: allow all characters in regexes used to parse version stringsAlexander Kanavin
Previously only numeric characters were matches and anything else was discarded, so 4.0-rc3, 2005e, 1.0.2a and similar versions got truncated. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09oprofile: reorder SRC_URI lines to fix upstream version checkAlexander Kanavin
The source tarball should be listed first. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gptfdisk: update to 1.0.0Alexander Kanavin
Also, use tarballs instead of git for fetching source code. git repository does not have version tags, so upstream version check cannot be performed. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09mesa: upgrade 10.5.8 -> 10.6.3Nicolas Dechesne
* Removed openvg references in PACKAGECONFIG, FILES and PACKAGES since OpenVG support was removed in mesa 10.6 * Tested with X11 : * xf86-video-freedreno on IFC6410 and DragonBoard 410c * softpipe on DragonBoard 410c * using meta-qualcomm BSP Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09xf86-input-vmmouse: Upgrade 13.0.0 -> 13.1.0Jussi Kukkonen
* Remove backported patch * Remove PR * Use ${nonarch_base_libdir} for udev files. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09pulseaudio: Add systemd to PACKAGECONFIG if enabled in DISTRO_FEATURESPau Espin Pedrol
Signed-off-by: Pau Espin Pedrol <pau.espin@aweurope.be> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09systemd.bbclass: Use systemd_system_unitdirPau Espin Pedrol
Signed-off-by: Pau Espin Pedrol <pau.espin@aweurope.be> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09bitbake.conf: Add nonarch_libdir and base systemd vars on itPau Espin Pedrol
Signed-off-by: Pau Espin Pedrol <pau.espin@aweurope.be> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09bootimg.bbclass:iso: determine the -iso-level only if there is a rootfsRicardo Neri
It may be possible that some bootable images do not use a rootfs; this may be the case if the bootable image utilize only an initrd for all its needs. If there is not rootfs, the size calculation will fail. Furthermore, given that the iso9660 conformance level is determined using the size of rootfs, it makes sense to not make the calculation if there is not such rootfs. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09bash_3.2.48: dont include target CFLAGS in host LDFLAGSAndre McCurdy
Building the host tool 'mkbuiltins' will fail if the target CFLAGS contains an option which isn't supported by the host's gcc. To prevent the issue, define LDFLAGS_FOR_BUILD based on CFLAGS_FOR_BUILD instead of CFLAGS. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09ca-certificates: Update 20141019 -> 20150426Khem Raj
Older SRCREV was not fetchable which triggered this upgrade Change-Id: I85d028294ff0018f4c81c6bb81ae262b18af7a87 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09uclibc: backport upstream fix for SH4Andre McCurdy
Backport upstream fix for building uclibc for SH4 with recent gcc: http://git.uclibc.org/uClibc/commit/?id=2c8a7766681b704e710f51c0817534e3f9a952d1 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09libiconv_1.11.1: merge build and packaging fixes from libiconv_1.14Andre McCurdy
054151c libiconv: Fix B != S with uclibc builds 273c437 libiconv: Remove RPATH from binaries fcb8d6f libiconv_1.14.bb: Fix build failure [partial-merge] Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09libiconv_1.11.1: fix LICENSE declaration, LGPL -> LGPLv2.0Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gettext_0.16.1: add -lrt and -lpthread to LDFLAGS for uclibc buildsAndre McCurdy
Fix linker errors due to posix_spawnp etc being in librt for uclibc. | sh4-rdk-linux-uclibc-libtool: link: sh4-rdk-linux-uclibc-gcc -ml -m4 --sysroot=/build-foo/tmp/sysroots/foo -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/test-names test-names.o libuniname.a ../gnulib-lib/.libs/libgettextlib.so /build-foo/tmp/work/sh4-rdk-linux-uclibc/gettext/0.16.1-r6/build/gettext-tools/intl/.libs/libintl.so -lc /build-foo/tmp/sysroots/foo/usr/lib/libiconv.so | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawnp' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_adddup2' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_addopen' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_addclose' | collect2: error: ld returned 1 exit status Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gettext_0.16.1: remove obsolete uclibc specific patchAndre McCurdy
gettext-error_print_progname.patch was originally created for gettext v0.14.6 and does not apply cleanly to gettext v0.16.1. Since the original issue addressed by the patch isn't documented and because gettext v0.16.1 seems to be build OK for uclibc without the patch, assume the patch is obsolete and no longer required. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09which: Upgrade 2.20 -> 2.21Jussi Kukkonen
* Drop one upstreamed patch, update the other one Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09vte: Fix LICENSE to LGPL2.0Jussi Kukkonen
Current releases of vte are LGPL 2.1+ but the one we have is still LGPL 2.0. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09fontconfig: Upgrade 2.11.93 -> 2.11.94Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gtk-icon-utils-native: Upgrade 3.16.4 -> 3.16.6Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gtk+3: Upgrade 3.16.4 -> 3.16.6Jussi Kukkonen
Remove a backported patch. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gstreamer1.0-plugins-base: Enable pango packageconfig by defaultCarlos Rafael Giani
There is no discernible reason why pango should be initially disabled, since the necessary dependency is already included in OE core Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09initscripts: Fix regression for requiring /bin/bashJason Wessel
It is not possible to create a rootfs with only busybox + initscipts. This is a result of a regression from commit a4b53872a8a9a2743299acbff015f7f2750a69d6 (initscripts: add /sbin/sushell for systemd service debug-shell). The /sbin/sushell should just use /bin/sh else you end up with a problem when creating the end image with a failed smart transaction shown below: ERROR: Unable to install packages. Command '/proj/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/smart --quiet --data-dir=/proj/bitbake_build/tmp/work/qemuarma9-wrs-linux-gnueabi/wrlinux-image-glibc-small/1.0-r1/rootfs/var/lib/smart install -y dropbear@armv7at2_vfp hac@armv7at2_vfp run-postinsts@all kernel-modules@qemuarma9 packagegroup-core-boot@qemuarma9' returned 1: error: Can't install initscripts-1.0-r155.0@armv7at2_vfp: no package provides /bin/bash Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09qemu: upgrade to 2.4.0-rc4Cristian Iorga
Bugfixes, bring it closer to 2.4.0 final release. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09libinput: add configure arg and PACKAGECONFIG for libunwindJackie Huang
libinput uses pkg-config to check and decide whether to build with libunwind, which causes undeterministic builds or error: | tmp/work/core2-64-wrs-linux/libinput/0.18.0-r0/libinput-0.18.0/test/litest.c:77:23: | fatal error: libunwind.h: No such file or directory So add configure arg and PACKAGECONFIG for libunwind to make deterministic build, but libunwind is disabled by default. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09cups: upgrade to 2.0.4Chen Qi
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09resolvconf: upgrade to 1.77Chen Qi
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09binutils: 2.25 -> 2.25.1Robert Yang
binutils: 2.25 -> 2.25.1 tcmode-default.inc: update BINUVERSION Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-08-09qemu: add ptest sub-packageKai Kang
Add sub-package ptest which runs all unit tests cases for qemu. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09rt-tests: fix redo install errorKai Kang
Currently gzip on host is used. If host gzip is provided by pigz, it fails to redo install that pigz can't handle the option after file name. When run command for target install in Makefile: gzip src/backfire/backfire.4 -c > OUTPUT_FILE File src/backfire/backfire.4 is zipped into backfire.4.gz but the OUTPUT_FILE is empty. When rerun do_install, it shows warning: | gzip: src/backfire/backfire.4 does not exist -- skipping and empty manual gzip files are created: $ file image/usr/share/man/man4/backfire.4.gz image/usr/share/man/man4/backfire.4.gz: empty Fix it by putting option '-c' before the file name. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09bash: 4.3 -> 4.3.30Robert Yang
Remove patch001 -> patch030 since they are already in source, add patch031 -> patch039 Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-08-09libcheck: 0.9.14 -> 0.10.0Robert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-08-09file: 5.23 -> 5.24Robert Yang
* Remove backported patch: - 0001-Fix-bug-with-long-options-and-explicitly-number-them.patch \ - 0002-fix-bug-with-5.23-long-options.patch \ * Use git repo rather than tarball since the original SRC_URI is not stable, it is not reachable sometimes. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-08-09git: 2.4.6 -> 2.5.0Robert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-08-09boost: add python3 supportAndreas Müller
* Both - python/python3 - libs are build by adding 'python' to PACKAGECONFIG but are packed into separate packages * Indention was wrong in __anonymous() Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09libpam: Fix patch broken during upgradeRichard Purdie
"0x200" became "0200" during the upgrade to libpam 1.2.1 in: http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=88dd997d9941b63ae9eead6690ecf2b785c0740c and this broke the IMAGE_FEATURES like debug-tweaks. I've converted all the values to octal here to match the original header file convention and make it clearer. [YOCTO #8033] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09security_flags.inc: disable -pie and -fpie from Python3 compilation.Topi Kuutela
If security_flags.inc is 'required' to the image, -pie and -fpie options are added to CFLAGS. These are not compatible with -shared GCC option. The result is several errors of following form and missing Python3 modules in the image: *.o In function `_start': *.S undefined reference to `main' collect2: error: ld returned 1 exit status Signed-off-by: Topi Kuutela <topi.kuutela@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: release 0.2.0Ed Bartosh
Major changes in 0.2.0: - implemented UUID support - fixed support of GPT partition tables - implemented running bitbake from wic - implemented image compressing - started testing with oe-selftest. implemented 17 test cases - used native tools (parted, mkfs, mtools, etc) - usability and documentation fixes - code clenup Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: code cleanup: pylint misc.pyEd Bartosh
Fixed pylint warnings. Increased pylint score from 8.02 to 9.40. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: code cleanup: remove unused codeEd Bartosh
Removed unused global variable wks_vars and 2 unused functions get_wks_var and add_wks_var. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: Report recipe name for native commandsEd Bartosh
exec_native_cmd was modified to report recipe to build native programs. Pairs executable->recipe are hardcoded as it's not possible to obtain this information automatically. [YOCTO #7631] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: Improve 'wic help overview' contentEd Bartosh
Included full console output and example of the .wks file into the 'wic help overview' content. Used qemux86-64 machine instead of crownbay to make example working without cloning additional layers. [YOCTO #7940] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wic: improved usage textEd Bartosh
Made command line specification less confusing. Reformatted usage output. [YOCTO #7938] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09stress: update checksums to match upstream tarballAlexander Kanavin
COPYING checksum has changed because the previous upstream tarball (taken from Fedora) had GPLv3 in it, but author's tarball has GPLv2. Otherwise the tarballs are identical Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09create-pull-request: cd to relative directoryEd Bartosh
create-pull-request -d path creates empty patches if directory is specified as a path, i.e. ./bitbake or ./bitbake/ or full path. It behaves expected way only if script is run with -d bitbake, i.e. relative dir name doesn't contain '\'. Fixed this unwanted behaviour by changing directory and running git format-patch in it with --relative, without specifying relative path as a parameter. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09wpa-supplicant: Fix CVE-2015-4141, CVE-2015-4143, CVE-2015-4144, ↵Fan Xin
CVE-2015-4145, CVE-2015-4146 wpa-supplicant: backport patch to fix CVE-2015-4141, CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146 Backport patch to fix CVE-2015-4141, CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146. This patch is originally from: For CVE-2015-4141: http://w1.fi/security/2015-2/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch For CVE-2015-4143: http://w1.fi/security/2015-4/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch http://w1.fi/security/2015-4/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch For CVE-2015-4144 and CVE-2015-4145: http://w1.fi/security/2015-4/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch http://w1.fi/security/2015-4/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch For CVE-2015-4146: http://w1.fi/security/2015-4/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch Signed-off-by: Fan Xin <fan.xin at jp.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-09-25 11:44:12 +0000