summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-10-01build-appliance-image: Update to jethro head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01Revert "oeqa/runtime: Added one runtime testcase in connman."Cristian Iorga
connman daemon forks during normal usage, so this test is no longer valid and generates sometimes false positives. This reverts commit 7d01c595c96eb3d67b90caf71050c4e9345257de. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01qemu: Drop BROKEN usageRichard Purdie
BROKEN support was removed from bitbake back in 2013. These lines just increase parsing time, remove them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01smart:cache.py: getPackages() matches name + archRobert Yang
It only matched name ony in the past, for example: smart install busybox (matched) but: smart install busybox@core2_64 (didn't match) The installation is very slow when no match since it would seach all the packages in the repo, and what we use mostly in oe-core is the second case, so the installation is very slow when install COMPLEMENTARY packages such as the task do_populate_sdk. This patch makes it match both. * Speed up MACHINE = "qemux86-64" - When multilib enabled: $ bitbake core-image-sato -cpopulate_sdk time: 6m5s -> 2m34s (Reduce 57% ) $ bitbake core-image-minimal -cpopulate_sdk time: 2m1s -> 1m26s (Reduce 28% ) $ bitbake core-image-sato-sdk time: 10m15s -> 7m12s (Reduce 29% ) - When multilib NOT enabled: $ bitbake core-image-sato -cpopulate_sdk time: 4m25s -> 2m28s (Reduce 44% ) [YOCTO #8389] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01devtool: modify: use correct local files directory nameMarkus Lehtonen
The name of the directory for local source files under srctree is 'oe-local-files', not 'local-files'. Fixes a bug that slipped through in b7ab82485e4514e07ab8a76e554da27ddc92e6c0. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01xuser-account: Take over xuser specific D-Bus policyJussi Kukkonen
Move connmans xuser-related D-Bus policy to a separate file that xuser-account installs: This way connman does not need to depend on xuser-account. Add policies for bluez and ofono in the same file. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01bluez5: Use upstream D-Bus policyJussi Kukkonen
The Bluez D-Bus policy is much too open and affects not just bluez but all system services: Use upstream policy configuration instead. This change has a chance of affecting other D-Bus services: the bug that is fixed here may have hidden problems in other policies. [YOCTO #8414] Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01ptest: run-ptest not required to run do_install_ptestIan Ray
Modify do_install_ptest_base to run do_install_ptest and install the Makefile irrespective of the presence of ${WORKDIR}/run-ptest. This change allows "ptest-aware" packages to install run-ptest as part of the make machinery. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01distrodata: Take account proxies on distrodata tasksLeonardo Sandoval
Proxies defined in the enviroment where not taken into account on the distrodata tasks. This commit implied passing the datastore into the distro_check library and context manager for the urllib.urlopen function. One way to run distrodata tasks is using 'universe' as target and the 'all' distrodata task: $ bitbake universe -c distrodataall $ bitbake universe -c distro_checkall $ bitbake universe -c checklicenseall Logs are located under TMPDIR/log [YOCTO #7567] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01devtool: update-recipe: enable var history trackingMarkus Lehtonen
Enable variable history tracking so that the variables are updated in the correct file - i.e. in the file they are already defined. [YOCTO #7715] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01oeqa/selftest/wic: Use SetupLocal instead of SetupRichard Purdie
If we replace the code Setup method, we don't get the cleanup it performs and this just resulted in failures on the autobuilder due to a stale config fragment. Setup will call SetupLocal so this should be a safe and easy fix to resolve the auobuilder failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01kernel.bbclass: fix the bug of checking the existing sections in do_strip()Kevin Hao
Ross reported the following waring when building edgerouter BSP: WARNING: Section not found: .comment The reason is that the testing of the existing sections in do_strip() returned the wrong value. Please see the following code in do_strip(): for str in ${KERNEL_IMAGE_STRIP_EXTRA_SECTIONS}; do { if [ "$headers" != *"$str"* ]; then bbwarn "Section not found: $str"; fi "$CROSS_COMPILE"strip -s -R $str ${KERNEL_OUTPUT} }; done The "*" doesn't have special meaning in the if string test, so it will return true even the $str is a substring of $headers. Fix this issue by replacing it with "! (echo "$headers" | grep -q "^$str$")". Reported-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01linux-yocto_{3.14,3.19,4.1}: qemuarm enable virtio driversAníbal Limón
We are experimenting segfault in qemu arm SCSI driver because it's broken [1][2] so enable virtio drivers to use as default. [YOCTO #8060] [1] https://lists.gnu.org/archive/html/qemu-devel/2007-03/msg00093.html [2] https://lists.nongnu.org/archive/html/qemu-devel/2010-07/msg01473.html Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01runqemu-internal: qemuarm enable usage of virtio devicesAníbal Limón
We are experiencing occasional segfaults in scsi sym53c8xx driver on qemuarm boot. There are some old discussions into the mailing lists [1] about the scsi problem and seems to be isn't fixed. We use virtio blk/net devices into qemuarm64 also are supported into qemuarm so change to use it because virtio devices are the best choice. [YOCTO #8060] [1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8060#c10 Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01gnome-doc-utils: xslt - don't install MakefilesWenzong Fan
All the xml files under xslt will be installed by default, the buildtime stuffs that Makefile, Makefile.in, Makefile.am are not needed for target. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01apr-utils: cleanup buildpaths for target stuffsWenzong Fan
* cleanup buildpaths from apu-1-config: - remove ${STAGING_DIR_HOST} from CC, CPP ... - set APU_SOURCE_DIR, APU_BUILD_DIR as empty Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01apr: cleanup buildpaths from target stuffsWenzong Fan
* cleanup buildpaths from apr_rules.mk and apr-1-config: - remove ${STAGING_DIR_HOST} from CC, CPP ... - set APR_SOURCE_DIR, APR_BUILD_DIR as empty * install ${HOST_SYS}-libtool to sysroot only, it's required for building apache2 but not suitable for target. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01curl: cleanup buildpaths from curl-configWenzong Fan
curl-config will be installed to target, cleanup buildpaths in it: * remove ${STAGING_DIR_HOST} from CC, CFLAGS ... Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01dropbear: fix key generation when systemd is in use and rootfs is readonlyAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01image.bbclass: tweak the key location for dropbear when rootfs is readonlyAlexander Kanavin
In the same way it's done for openssh. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01openssh: fix sshd key generation when systemd is in use and rootfs is readonlyAlexander Kanavin
[YOCTO #8365] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01image.bbclass: when building a readonly rootfs, tweak ssh settings ↵Alexander Kanavin
regardless of init system in use Previously it was done only if sysvinit was in DISTRO_FEATURES. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01lttng-tools: Drop KERNELDIR referenceRichard Purdie
The source makes no reference to KERNELDIR any more and this make the recipe machine specific. Simply drop the unused reference. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01meta-ide-support: No need to mark as nostamp anymoreRichard Purdie
With the modern checksum infrastructure, this is no longer needed (much in the same way images no longer need this). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01adt-installer: No need to mark as nostampRichard Purdie
With the modern checksum infrastructure, this is no longer needed (much in the same way images no longer need this). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01distutils3: Avoid MACHINE specific checksumsRichard Purdie
The MACHINE variable is used to handle sysroot paths within one of the patches to python3-native. In this context, it is relocation safe and the resulting packages should not have MACHINE specific checksums, therefore excluding MACHINE in this context is safe. This whole setup is ugly and ideally we should come up with a better way of handling this but at least allow a stop gap solution for now. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01gstreamer-omx: Improve variable expansion of ${S}Richard Purdie
The way ${S} is expanded into CFLAGS means the recipe is marked as depending on the path within which its built. We can avoid this by avoiding the expansion which then allows reuse of the recipe from sstate. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01bitbake.conf: Exclude sstate-outputdirs flag from checksumsRichard Purdie
This was making deploy tasks MACHINE specific since they place output into DEPLOY_DIR_IMAGE which contains MACHINE. On the plus side, this was accidentally ensuring the output was placed for each machine, on the downside it was triggering a rebuild every time for the different checksum. There is a better way to handle this which avoids the rebuild, see the following tweak to do_deploy to mark it as MACHINE specific in a different way. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01deploy: Mark deploy tasks as MACHINE specificRichard Purdie
This adds the markup to inform bitbake to rerun the deploy task per MACHINE. This makes sense since DEPLOY_DIR_IMAGE contains MACHINE. Doing it this way means the same artefact will be reused from sstate rather than rebuilt. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01layer.conf: Add SIGGEN exclusion for oprofile kernel dependencyRichard Purdie
The oprofile kernel dependency is a simple RRECOMMENDS, it therefore doesn't have any interface constraints and doesn't need to rebuild every time the kernel changes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01layer.conf: Improve siggen exclusion to handle virtual/libcRichard Purdie
Now the system supports virtual/xxx in SIGGEN_ variables, convert this one to use virtual/libc instead of the hardcoded expansion which is error prone. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01multilib_global: Add handling of SIGGEN variables for multilibRichard Purdie
multilib task signatures turned out to have issues since SIGGEN_EXCLUDERECIPES_ABISAFE and SIGGEN_EXCLUDE_SAFE_RECIPE_DEP did not have multilib mappings. This adds those mappings in which in turn improves multilib task checksums to match the standard non-mulitlib versions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01lib/oe/sstate: Add tasks_resolved handler for virtual/xxx mappingsRichard Purdie
In SIGGEN_EXCLUDERECIPES_ABISAFE and SIGGEN_EXCLUDE_SAFE_RECIPE_DEP we really need to be able to use virtual/xxx namespaces but this currently doesn't work. To make this work, we need to translate them into the resolved providers. After such a hook was added to bitbake, we can add this translation here. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01oeqa/selftest/sstatetests: Add test that MACHINE doesn't change target sigsRichard Purdie
When we change between two machines with the same tune, we shouldn't see rebuilds of binaries. This adds a test for this using the qemux86copy machine. We also extend the test to cover multilibs. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01meta-selftest: Add qemux86copy machineRichard Purdie
I know Martin finds something like this useful for testing sstate signatures, this adds one to meta-selftest so we can use it from oe-selftest in the sstate tests there too. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01oeqa/selftest/sstatetests: Add check for same sigs for SDKMACHINERichard Purdie
Extend one of the sstate tests to also ensure that changing SDKMACHINE doesn't change the target task checksums. Also fix a typo and improve debugging by turning the diff filtering off in all cases (if the test fails, we want to full list). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01multilib.conf: Ensure MACHINE doesn't change target sigsRichard Purdie
Sysroot paths (which happen to contain MACHINE) should not cause the signatures to change every time MACHINE changes so exclude this from them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01gcc-multilib-config: Ensure SDK_ARCH doesn't change target sigsRichard Purdie
Changing SDKMACHINE (which changes SDK_ARCH) shouldn't cause target task signatures to change. Exclude the dependency on SDK_ARCH for this reason. It only affects nativesdk builds and those already account for SDK_ARCH in the build WORKDIR paths. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01lib/oe/package_manager: Handle empty package list in opkg caseRichard Purdie
If you build buildtools-tarball with opkg as the package manager, it passes in an empty target packages list and fails. This allows the code to cope with an empty package list (in sync with the rpm backend). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01oeqa/utils/decorators: Append the testname without the full pathLeonardo Sandoval
When getting the failures/errors/skipped lists, include the unit test without the full path. This issue was found on this scenario | test_1_logrotate_setup (oeqa.runtime.logrotate.LogrotateTest) ... FAIL | test_2_logrotate (oeqa.runtime.logrotate.LogrotateTest) ... ok Where test_1_logrotate failed and test_2_logrotate should not have run because @skipUnlessPassed("test_1_logrotate_setup") def test_2_logrotate(self): Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01kern-tools: fix multi-layer patch applicationBruce Ashfield
Updating the kern-tools SRCREV to import the following fix: kgit-meta: resume after last applied patch When the auto-resume (resume point detection) was removed from the processing of a meta-series, it ignored the fact that a single patch series may in fact be processed a number of times. Two layers patching a kernel will generate two different runs on the same branch, which always start at patch one. This will obviously break with duplicate patches. To avoid this, we simply track the last patch applied, and explicitly tell the patch scripts where to start. This gets us resume functionality, without the overhead of resume point detection. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01linux-yocto/4.1: braswell bug fixesBruce Ashfield
Updating the 4.1 SRCREVs to integrate the following DRM backports: a8abc111a96d drm/i915: Only wait for required lanes in vlv_wait_port_ready() 81354180432b Revert "drm/i915: Hack to tie both common lanes together on chv" d660fc117731 drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV 0e797e9cb717 drm/i915: Implement chv display PHY lane stagger setup Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01linux-yocto/4.1: update to 4.1.8 -stableBruce Ashfield
There are some important fixes and CVEs in 4.1.8, so we update the SRCREVs to integrate the -stable changes. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01linux-yocto-rt/4.1: integrate axxia BSPBruce Ashfield
As part of the axxia preempt-rt integration, the preempt-rt branch now becomes standard/preempt-rt/base, to allow proper branch inheritance as: standard/preempt-rt/axxia/base. No functional changes happen to the base -rt, just the default KBRANCH changes. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01meta: fix build with gettext 0.16.1Robert Yang
The gettext 0.16.1 doesn't install any m4 files to sysroot, please see the following commit: commit 9e10db5bdfe77c0ef2aff2f1cf89958b62c294a1 Author: Christopher Larson <kergoth@gmail.com> Date: Mon Mar 17 18:10:54 2014 +0000 gettext-0.16.1: kill target m4 macros from sysroot This is aim for using gettext-native's macros(gettext-native-0.19.4), but when we set: PREFERRED_VERSION_gettext = "0.16.1" And build the recipes like pcmanfm, we would get errors when do_configure: configure:5164: error: possibly undefined macro: AM_NLS This is because autotools_copy_aclocals doesn't copy the native macros for target unless they're direct dependencies. Add gettext-native to DEPENDS will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01hostap-utils: Use C99 stddefs in defining local typedefsKhem Raj
The code is creating more abstract types which is nice however it should be using standard defines from stdint.h and not random defines to base its own type system Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01linux-yocto-custom: Update for newer kernelSaul Wold
Update the NAME version tweak example patch for the newer kernel. This moves the example to the 4.2 stable kernel and appends -custom to the VERSION string. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01oetest: Change logic of a failed testMariano Lopez
Currently the logic to check if a test failed was to check for an exception in the thread, but some decorators used in the syslog runtime test would generate and handle exceptions; this will mess with the current check logic and will dump the host and the target as if the test failed. This patch changes the check logic to verify if the test that just happend is in the failure test list and dump the host and target accordingly. [YOCTO #8406] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-10-01cwautomacros: cleanup buildpath in autogen.shJackie Huang
CWAUTOMACROSPREFIX is ${D}${prefix} which is used as the prefix of install dir and used to replace the path placeholder in script autogen.sh, the former is correct but not for the later, we can fix the Makefile to use two variables for this, but I think a sed replacement would be fine since the package has not been in development for a long time. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-29oeqa/runexported: Fix a problem with ssh_target_log existing in folder.Lucian Musat
When copying the exported tests to a remote machine ssh_target_log can be transformed from softlink to file which will throw an error when trying to run again. Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-06 22:12:45 +0000