aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* glibc: Add missing symlinks for libpthread and librt dev fileskraj/glibc-2.34Khem Raj2021-08-021-0/+2
| | | | Signed-off-by: Khem Raj <raj.khem@gmail.com>
* glibc: Drop DUMMY_LOCALE_T define patchKhem Raj2021-08-023-31/+0
| | | | | | It was needed for very old centos distros which are no longer supported Signed-off-by: Khem Raj <raj.khem@gmail.com>
* glibc: Remove obsolete --enable-stackguard-randomizationKhem Raj2021-08-021-1/+0
| | | | | | this has been removed in 2.34 onwards Signed-off-by: Khem Raj <raj.khem@gmail.com>
* glibc: Upgrade to 2.34 releaseKhem Raj2021-08-0244-1443/+136
| | | | | | | | | | | | | bump localedef to get __attr_access_none and __attr_access definitions replace /bin/bash instead of @BASH@ in ldd as @BASH@ has been substituted with /bin/bash now package libc_malloc_debug.so.0 Detailed changelog [1] [1] https://sourceware.org/pipermail/libc-alpha/2021-August/129718.html Signed-off-by: Khem Raj <raj.khem@gmail.com>
* vim: Clarify where RDEPENDS/RRECOMMENDS applyRichard Purdie2021-08-022-4/+4
| | | | | | | | The tricky of using BPN in a common inc file is rather hard to understand. Simplfy this by moving it to the base vim recipe and use the standard variable form. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-pytest: display correct version infoKai Kang2021-08-012-38/+2
| | | | | | | | | | | | | | | | | It does not show correct version info of python3-pytest: $ pip3 list | grep pytest pytest 0.0.0 pytest requires setuptools-scm in setup.cfg. It could be met by adding python3-setuptools-scm-native to dependency and then it will not download egg file of setuptools-scm during do_compile any more. So remove 0001-setup.py-remove-the-setup_requires-for-setuptools-scm.patch and depend on python3-setuptools-scm-native to make it show the correct version info. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext: Fix handling of TOOLCHAIN_HOST_TASK in the eSDK caseRichard Purdie2021-08-011-12/+7
| | | | | | | | | | | | | | | | | | | | | | The current way TOOLCHAIN_HOST_TASK is handled within eSDK builds is causing much confusion, even to people who should understand the code. For a normal SDK, some layers append to TOOLCHAIN_HOST_TASK unconditionally which is fine, until the eSDK tries to override the variable to it's own values. It does not support or use packages installed using this variable and would use native recipes instead, it is a very different approach. In the referenced bug, binaries are added but not relocated leading to confusing errors. To fix this, add a new variables for the eSDK TOOLCHAIN_HOST_TASK to be explict and force the eSDK code to use this instead. The setVar in non-parsing context will clear out any appends resolving the current issues. The patch also gets rid of some dubious task override use. [YCOTO #14047] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* stress-ng: Detemine minimal stack size via sysconfKhem Raj2021-08-012-0/+104
| | | | | | | This helps it compile with glibc 2.34+ Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Fix rebuilds when changing layer configRichard Purdie2021-08-011-0/+1
| | | | | | | | | | | When adding a layer which changed SSTATE_EXCLUDEDEPS_SYSROOT, the state hashes were changing when they should not. This was caused by wider use of setscene_depvalid which means the dependency on the variable was seen when it was previously not. Exclude the variable since this should be be included in the hashes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sdk: Decouple default install path from built in pathRichard Purdie2021-08-014-3/+7
| | | | | | | | | | | | Add SDKPATHINSTALL which is used as the default install location of the SDK instead of SDKPATH. This means the default install path isn't encoded into every SDK binary, meaning if a date is used there the entire SDK doesn't have to rebuild. Most distros can switch to only customise SDKPATHINSTALL meaning more sstate reuse too. [YOCTO #14100] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* convert-overrides: Allow script to handle patch/diffsRichard Purdie2021-08-011-3/+7
| | | | | | | It is handy to be able to have the script convert a single patch file and it turns out to be straightforward to make it do this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dropbear: Fix incorrect package override for postrmRichard Purdie2021-08-011-1/+1
| | | | | | | | This bug has been around for a long time (2011) but fix it to do what was intended originally. The postrm is changed by classes but those should append to existing entries. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc: update 11.1 -> 11.2Bernhard Rosenkränzer2021-08-0116-589/+4
| | | | | | | Update gcc, drop patches that have been merged upstream Signed-off-by: Bernhard Rosenkränzer <bero@lindev.ch> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/5.10: enable TYPEC_TCPCI in usbc fragmentBruce Ashfield2021-07-303-3/+3
| | | | | | | | To make the usbc fragment more generally usable, we enable the Type-C Port Controller driver for TCPCI-compliant controller. Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/5.13: enable TYPEC_TCPCI in usbc fragmentBruce Ashfield2021-07-303-3/+3
| | | | | | | | To make the usbc fragment more generally usable, we enable the Type-C Port Controller driver for TCPCI-compliant controller. Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto-rt/5.10: update to -rt47Bruce Ashfield2021-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | Integrating the following commit(s) to linux-yocto/5.10: 969fef49cbbc Linux 5.10.52-rt47 bb5ff998ba62 Linux 5.10.47-rt46 340f6b6cdd37 sched: Don't defer CPU pick to migration_cpu_stop() f3d0be7cdae8 sched: Simplify set_affinity_pending refcounts 6b28888ca42a sched: Fix affine_move_task() self-concurrency ea66e426a3b7 sched: Optimize migration_cpu_stop() ac73ac41db62 sched: Collate affine_move_task() stoppers 6963e6b6e008 sched: Simplify migration_cpu_stop() d3a5a12fd350 sched: Fix migration_cpu_stop() requeueing 28dda3752954 Linux 5.10.47-rt45 d5f6c5f008ee Linux 5.10.44-rt44 ec9978fdc6aa Linux 5.10.42-rt43 Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/5.4: update to v5.4.135Bruce Ashfield2021-07-303-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating linux-yocto/5.4 to the latest korg -stable release that comprises the following commits: 0a0beb1f9120 Linux 5.4.135 d2f7b384a74f udp: annotate data races around unix_sk(sk)->gso_size c72374978b3f perf test bpf: Free obj_buf 17bc942c0b96 bpftool: Properly close va_list 'ap' by va_end() on error 84ed8340941a ipv6: tcp: drop silly ICMPv6 packet too big messages 315033cab379 tcp: annotate data races around tp->mtu_info 41f45e91c92c dma-buf/sync_file: Don't leak fences on merge failure 04b06716838b net: fddi: fix UAF in fza_probe 8aa13a86964c net: validate lwtstate->data before returning from skb_tunnel_info() 8cff7b28ab05 net: send SYNACK packet with accepted fwmark b7e5563f2a78 net: ti: fix UAF in tlan:remove_one 2b70ca92847c net: qcom/emac: fix UAF in emac:remove 463c0addb4eb net: moxa: fix UAF in moxart_mac_probe 7ac4a6a74e75 net: ip_tunnel: fix mtu calculation for ETHER tunnel devices d5dc50ca1f7a net: bcmgenet: Ensure all TX/RX queues DMAs are disabled 7ecd40801e5b net: bridge: sync fdb to new unicast-filtering ports 813d45499f51 net/sched: act_ct: fix err check for nf_conntrack_confirm 24973073562f netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo c6f4a71153f4 net: ipv6: fix return value of ip6_skb_dst_mtu 9872273b670a net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz 6148ddff2dcb net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz d73c180e6add dm writecache: return the exact table values that were set 8a85afc6621a mm: slab: fix kmem_cache_create failed when sysfs node not destroyed f53729b828db usb: cdns3: Enable TDL_CHK only for OUT ep 52b01a808696 f2fs: Show casefolding support only when supported 91d846016729 arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file f696cc7f1bc8 firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string e2b28026b861 arm64: dts: armada-3720-turris-mox: add firmware node f7d1fa65e742 cifs: prevent NULL deref in cifs_compose_mount_options() 06d8a7eb5803 s390: introduce proper type handling call_on_stack() macro 2a47e0719ae7 sched/fair: Fix CFS bandwidth hrtimer expiry type 5b7d065868a6 scsi: qedf: Add check to synchronize abort and flush 0fe70c15f943 scsi: libfc: Fix array index out of bound exception d7b647d05586 scsi: libsas: Add LUN number check in .slave_alloc callback 863c4bc883d5 scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 712e9ed6134f rtc: max77686: Do not enforce (incorrect) interrupt trigger type 199d8ea4c7b1 kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set 484193b635a7 thermal/core: Correct function name thermal_zone_device_unregister() 556cf0283035 arm64: dts: imx8mq: assign PCIe clocks 9d3eb68a5385 arm64: dts: ls208xa: remove bus-num from dspi node e054b361caec firmware: tegra: bpmp: Fix Tegra234-only builds 94d009577033 soc/tegra: fuse: Fix Tegra234-only builds 270a2e9fafea ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 4bc66215bc22 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings 856c753237ae ARM: dts: rockchip: fix supply properties in io-domains nodes c5bb9cc2ce23 arm64: dts: juno: Update SCPI nodes as per the YAML schema f572a9139396 ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings 95e795474c81 ARM: dts: stm32: fix RCC node name on stm32f429 MCU a898aa9f88cc ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards 5c17edaaead7 ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios 3446233096ff ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios e79e29a4e162 kbuild: sink stdout from cmd for silent build f817d4677582 rtc: mxc_v2: add missing MODULE_DEVICE_TABLE 0a22b5178276 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info e20e85639e25 ARM: dts: imx6: phyFLEX: Fix UART hardware flow control a5b19d33ae22 ARM: dts: Hurricane 2: Fix NAND nodes names f83535a47ff8 ARM: dts: BCM63xx: Fix NAND nodes names cb05b84ad7f1 ARM: NSP: dts: fix NAND nodes names 14e3bad3b548 ARM: Cygnus: dts: fix NAND nodes names 587a757afe73 ARM: brcmstb: dts: fix NAND nodes names a9c32c7aeee6 reset: ti-syscon: fix to_ti_syscon_reset_data macro b400afa42739 arm64: dts: rockchip: Fix power-controller node names for rk3328 dfb4e8ed0792 arm64: dts: rockchip: Fix power-controller node names for px30 789070f17886 ARM: dts: rockchip: Fix power-controller node names for rk3288 6aaffe6ce8a9 ARM: dts: rockchip: Fix power-controller node names for rk3188 439115ee56d8 ARM: dts: rockchip: Fix power-controller node names for rk3066a 3b4c34728382 ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x c9d29d62da59 ARM: dts: rockchip: Fix the timer clocks order d105e15de610 arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi cfe3d29e5cde ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 79573c64410b ARM: dts: gemini: add device_type on pci 7037876393ce ARM: dts: gemini: rename mdio to the right name Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/5.13: update to v5.13.5Bruce Ashfield2021-07-303-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating linux-yocto/5.13 to the latest korg -stable release that comprises the following commits: 25423f4bd9a9 Linux 5.13.5 c50bcc85a057 mt76: mt7921: continue to probe driver when fw already downloaded c1b582a7e364 udp: properly flush normal packet at GRO time e3104dccdd79 udp: annotate data races around unix_sk(sk)->gso_size 010f5d09fa32 firmware: arm_scmi: Avoid padding in sensor message structure 90ed7e5771ea drm/panel: nt35510: Do not fail if DSI read fails fcd280d92bad perf test bpf: Free obj_buf 599148d40366 bpf: Track subprog poke descriptors correctly and fix use-after-free 4edc469e4a63 bpftool: Properly close va_list 'ap' by va_end() on error a3b4cb28a2e8 tools: bpf: Fix error in 'make -C tools/ bpf_install' e023c648a764 tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path c0fea93d9f77 ipv6: tcp: drop silly ICMPv6 packet too big messages fe77b85828ca tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized 341dd0904d4f tcp: annotate data races around tp->mtu_info 108727841c25 tcp: consistently disable header prediction for mptcp ed8c953ef967 ARM: dts: everest: Add phase corrections for eMMC cc02a1bd5b7b ARM: dts: tacoma: Add phase corrections for eMMC 5cc4abeab14f ARM: dts: aspeed: Fix AST2600 machines line names 6f6f8f894a55 vboxsf: Add support for the atomic_open directory-inode op 53c4f60ed9dd vboxsf: Add vboxsf_[create|release]_sf_handle() helpers 6e64fd2f677f vboxsf: Make vboxsf_dir_create() return the handle for the created file 1f7cdb5def52 vboxsf: Honor excl flag to the dir-inode create op 753b33d387ec kbuild: do not suppress Kconfig prompts for silent build 19edcd97727a dma-buf/sync_file: Don't leak fences on merge failure bdfbb51f7a43 net: fddi: fix UAF in fza_probe d7243e2ab1c6 net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() a915379594f1 net: validate lwtstate->data before returning from skb_tunnel_info() 12917871d234 net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache d731dcbcefd2 net: send SYNACK packet with accepted fwmark 93efab0ef2a6 net: ti: fix UAF in tlan:remove_one 8a225a6e07a5 net: qcom/emac: fix UAF in emac:remove aa92c87dc2d8 net: moxa: fix UAF in moxart_mac_probe db3177b7ff0e net: ip_tunnel: fix mtu calculation for ETHER tunnel devices 02906fda9e7f net: bcmgenet: Ensure all TX/RX queues DMAs are disabled fd51ccd9c971 net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops c5e07e8c8ec8 net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment 3863428b04be net: bridge: sync fdb to new unicast-filtering ports fda8adcbbc70 net/sched: act_ct: remove and free nf_table callbacks c3eb534eae09 vmxnet3: fix cksum offload issues for tunnels with non-default udp ports 70a5a1950cca netfilter: nf_tables: Fix dereference of null pointer flow c6eb7ce9f11c net/sched: act_ct: fix err check for nf_conntrack_confirm a598091fc909 netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo f6eaa0620312 net: ipv6: fix return value of ip6_skb_dst_mtu 231ea2169024 net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz c57e63264dfb net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz 8eef55a59620 net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz 0104c68efb3e net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz 8263e5c08f46 net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz 36d57bbdf93f net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz c74ded51a37f net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear 8c4f51b15196 f2fs: Show casefolding support only when supported ac1714556003 mm/userfaultfd: fix uffd-wp special cases for fork() fd26ee0a1a82 mm/thp: simplify copying of huge zero page pmd when fork b33e80b18a0a Revert "mm/shmem: fix shmem_swapin() race with swapoff" 58d7ce3934ae Revert "swap: fix do_swap_page() race with swapoff" 03c03b893661 arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file cffb7390312e firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string ae3d181f4e91 cifs: prevent NULL deref in cifs_compose_mount_options() c007614e78a1 s390: introduce proper type handling call_on_stack() macro 6ef3f584b593 s390/traps: do not test MONITOR CALL without CONFIG_BUG 09f1a8d85ec1 thermal/core/thermal_of: Stop zone device before unregistering it 505c12a1bd71 perf/x86/intel/uncore: Clean up error handling path of iio mapping 06d6142e1421 sched/fair: Fix CFS bandwidth hrtimer expiry type 8997002a88aa scsi: qedf: Add check to synchronize abort and flush 8511293e643a scsi: libfc: Fix array index out of bound exception f661723909ad scsi: libsas: Add LUN number check in .slave_alloc callback 9015de5e72d0 scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 1c033966a916 rtc: max77686: Do not enforce (incorrect) interrupt trigger type 2a04a3607548 arch/arm64/boot/dts/marvell: fix NAND partitioning scheme 26125ddc6904 kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set 4a7f9e9b24b9 arm64: dts: qcom: sm8150: Disable Adreno and modem by default 81c2374228cf arm64: dts: qcom: sm8250: Fix pcie2_lane unit address 9e159edfefb1 thermal/drivers/sprd: Add missing of_node_put for loop iteration 9a70f266994e thermal/drivers/imx_sc: Add missing of_node_put for loop iteration 82ad14246066 thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 c3e1034bf7a2 thermal/core: Correct function name thermal_zone_device_unregister() bbb41aa6ee41 arm64: dts: imx8: conn: fix enet clock setting 6d14b0e1cea1 arm64: dts: imx8mq: assign PCIe clocks 646b6021ff2e arm64: dts: imx8mn-beacon-som: Assign PMIC clock 5345699a5297 arm64: dts: ls208xa: remove bus-num from dspi node cef210690a7a arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory ee3acd45dc45 firmware: tegra: bpmp: Fix Tegra234-only builds ad36bf954334 soc/tegra: fuse: Fix Tegra234-only builds 7d9beefb89d0 ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured 72ea603ebc7f arm64: dts: qcom: sc7180: Add wakeup delay for adau codec a38e8678f0ad ARM: dts: stm32: fix stpmic node for stm32mp1 boards 6ea5c31a9ff6 ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM 208d0b5c4fe8 ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM 5ba5ec23b95d ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM 1ff4043818da ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply d3ad6193b11b ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 45134048d407 ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 c68df704e91f ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings 4d74e43113bc ARM: dts: rockchip: fix supply properties in io-domains nodes b6824bc92923 arm64: dts: juno: Update SCPI nodes as per the YAML schema 6ddae8441dc2 i3c: master: svc: drop free_irq of devm_request_irq allocated irq 81cc76202847 ARM: dts: bcm283x: Fix up GPIO LED node names 97b95aa1abfc ARM: dts: bcm283x: Fix up MMC node names 668f66189026 ARM: dts: aspeed: Everest: Fix cable card PCA chips 9a92a6efb8e6 firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected b9e7b8c0b9ef firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig 8ec19b8b9c33 memory: tegra: Fix compilation warnings on 64bit platforms bf6e424135e3 ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings 9e4183ab28b0 ARM: dts: stm32: fix RCC node name on stm32f429 MCU 5d36882a85f7 ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards 2a735d7a8167 ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin ea9312e7804e ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 39fb433494c2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 1dfe852260bd arm64: dts: qcom: sc7180: Move rmtfs memory region 58e1d4a68cb5 arm64: dts: qcom: sm8250: fix display nodes 638c3fc9774e arm64: dts: qcom: sm8350: fix the node unit addresses 3df317941718 ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant 94c054179d17 ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees cf48dfa5aa26 arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction 105f6beddcb8 arm64: tegra: Add PMU node for Tegra194 7ac85c09d5be ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names 7752857c652f ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios 7bfbec1bf56f ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios 24df090958a3 ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios 1b45d9048ff4 kbuild: sink stdout from cmd for silent build 3e079812f469 arm64: dts: renesas: beacon: Fix USB ref clock references 27469bcc5b05 arm64: dts: renesas: beacon: Fix USB extal reference b5f38dc8381c rtc: mxc_v2: add missing MODULE_DEVICE_TABLE 0c5b081a4d0a ARM: dts: ux500: Fix orientation of Janice accelerometer 15cd8eb0c2e6 ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value 4f0520fad7d8 ARM: dts: ux500: Fix some compatible strings b28ddd20572a ARM: dts: ux500: Fix orientation of accelerometer 7f1d0da1cc41 ARM: dts: ux500: Rename gpio-controller node 049ec888cd62 ARM: dts: ux500: Fix interrupt cells ea98b9eb6862 arm64: dts: rockchip: fix regulator-gpio states array 9680f1e8f8b5 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info 9b3161825b24 ARM: dts: imx6: phyFLEX: Fix UART hardware flow control f686c2ca9145 soc: mediatek: add missing MODULE_DEVICE_TABLE 556e5beac048 soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match' 3e3a7d2bf0d5 ARM: dts: BCM5301X: Fix pinmux subnodes names d8428468f91a ARM: dts: Hurricane 2: Fix NAND nodes names 051500990321 ARM: dts: BCM63xx: Fix NAND nodes names c477ee9b6402 ARM: NSP: dts: fix NAND nodes names 14a49e42f74c ARM: Cygnus: dts: fix NAND nodes names 12e303c937a2 ARM: brcmstb: dts: fix NAND nodes names ca57a034e846 ARM: dts: BCM5301X: Fix NAND nodes names ea49b15d27f0 reset: ti-syscon: fix to_ti_syscon_reset_data macro ac00948749f1 arm64: dts: rockchip: Fix power-controller node names for rk3399 e2cc3578a628 arm64: dts: rockchip: Fix power-controller node names for rk3328 0ff2235f030a arm64: dts: rockchip: Fix power-controller node names for px30 5ada42440f49 ARM: dts: rockchip: Fix power-controller node names for rk3288 0151a90fc279 ARM: dts: rockchip: Fix power-controller node names for rk3188 af5ca9f83fad ARM: dts: rockchip: Fix power-controller node names for rk3066a 9015d0c9b072 ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x 991661f15817 ARM: dts: rockchip: Fix the timer clocks order 670079df8659 arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi 5980cb81f165 arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 68d1369daf96 ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 deacb07e91be ARM: dts: rockchip: Fix thermal sensor cells o rk322x f6e1fd15b3ee ARM: dts: gemini: add device_type on pci 6f9ba39547e2 ARM: dts: gemini: rename mdio to the right name Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/5.10: update to v5.10.53Bruce Ashfield2021-07-303-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating linux-yocto/5.10 to the latest korg -stable release that comprises the following commits: 71046eac2db9 Linux 5.10.53 6cd9bd2a2ddb udp: annotate data races around unix_sk(sk)->gso_size bfdb38a4268a drm/panel: nt35510: Do not fail if DSI read fails 0d90d8492fb9 perf test bpf: Free obj_buf a9f36bf3613c bpf: Track subprog poke descriptors correctly and fix use-after-free 782d71e29b29 bpftool: Properly close va_list 'ap' by va_end() on error 2381b8e882d0 tools: bpf: Fix error in 'make -C tools/ bpf_install' 638632997c31 tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path 2fee3cf4c97b ipv6: tcp: drop silly ICMPv6 packet too big messages ad4ba3404931 tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized d60f07bcb76f tcp: annotate data races around tp->mtu_info ea66fcb29605 tcp: consistently disable header prediction for mptcp c28c747e37db ARM: dts: tacoma: Add phase corrections for eMMC e55160537d76 ARM: dts: aspeed: Fix AST2600 machines line names ff4b8f35c96c kbuild: do not suppress Kconfig prompts for silent build 0d514185ae79 dma-buf/sync_file: Don't leak fences on merge failure f33605908a9b net: fddi: fix UAF in fza_probe 66c73f187d1e net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() 7d7d0e84ac0d Revert "mm/shmem: fix shmem_swapin() race with swapoff" 2179d96ec702 net: validate lwtstate->data before returning from skb_tunnel_info() b61d8814c477 net: send SYNACK packet with accepted fwmark f2a062fcfe1d net: ti: fix UAF in tlan:remove_one b560521eca03 net: qcom/emac: fix UAF in emac:remove dbbf5b957bd9 net: moxa: fix UAF in moxart_mac_probe 88ff9ec9c67a net: ip_tunnel: fix mtu calculation for ETHER tunnel devices 846829e75db5 net: bcmgenet: Ensure all TX/RX queues DMAs are disabled b9fa66072fee net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops 59070cc43d1d net: bridge: sync fdb to new unicast-filtering ports 7b5a2910e782 net/sched: act_ct: remove and free nf_table callbacks 6d4476236f79 vmxnet3: fix cksum offload issues for tunnels with non-default udp ports c3bc9ce7d400 net/sched: act_ct: fix err check for nf_conntrack_confirm fc40fdefd94a netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo 34365de50806 net: ipv6: fix return value of ip6_skb_dst_mtu 73146745ff28 net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz a8c7ba368748 net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz 14cd8ce80ad7 net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz c657413dcddf net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz fcb970edc0be net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear 4e275a4aca68 usb: cdns3: Enable TDL_CHK only for OUT ep ce6ee46e0f39 mm/page_alloc: fix memory map initialization for descending nodes 9e1cf2d1ed37 mm/userfaultfd: fix uffd-wp special cases for fork() 84ff5f66c3f6 mm/thp: simplify copying of huge zero page pmd when fork a62177b35730 f2fs: Show casefolding support only when supported 277b311ae170 Revert "swap: fix do_swap_page() race with swapoff" d92aa22f2419 arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file 0e67c76384e9 firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string e58c162789be cifs: prevent NULL deref in cifs_compose_mount_options() faa3e7da487a s390: introduce proper type handling call_on_stack() macro be10fff3a461 s390/traps: do not test MONITOR CALL without CONFIG_BUG 9beba1469996 thermal/core/thermal_of: Stop zone device before unregistering it 7412c988fe12 perf/x86/intel/uncore: Clean up error handling path of iio mapping 892387e7619e sched/fair: Fix CFS bandwidth hrtimer expiry type eb859b043c2e scsi: qedf: Add check to synchronize abort and flush a4a54c54af25 scsi: libfc: Fix array index out of bound exception 0d7596a954f1 scsi: libsas: Add LUN number check in .slave_alloc callback 2f8df6332eb2 scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 cdb995a6cbb5 rtc: max77686: Do not enforce (incorrect) interrupt trigger type d3ba15fb0401 arch/arm64/boot/dts/marvell: fix NAND partitioning scheme e378db118925 kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set 8c12a3a68d4f thermal/drivers/sprd: Add missing of_node_put for loop iteration 20babcd83092 thermal/drivers/imx_sc: Add missing of_node_put for loop iteration 469951ce4bb0 thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 bd40e2da3ae5 thermal/core: Correct function name thermal_zone_device_unregister() 6c099d595fd7 arm64: dts: imx8mq: assign PCIe clocks 24c41aa9d01b arm64: dts: ls208xa: remove bus-num from dspi node 7e3f5739cccb firmware: tegra: bpmp: Fix Tegra234-only builds 7c03982fa134 soc/tegra: fuse: Fix Tegra234-only builds ffa6f08be14a ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured f40a7c9b8ee1 ARM: dts: stm32: fix stpmic node for stm32mp1 boards 2670d3d1ef47 ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM 26cd441c529d ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM a5bc2a2d838e ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply e27052f21a2f ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 6a7af6347810 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings 160c92d728f3 ARM: dts: rockchip: fix supply properties in io-domains nodes d671fae04648 arm64: dts: juno: Update SCPI nodes as per the YAML schema fc71d8df5807 ARM: dts: bcm283x: Fix up GPIO LED node names 4bc03e321f2a ARM: dts: bcm283x: Fix up MMC node names 15d727c044d5 firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected b4009ea92f29 firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig 41e2bcca23f1 memory: tegra: Fix compilation warnings on 64bit platforms 7ad965c8a723 ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings ccec32f77144 ARM: dts: stm32: fix RCC node name on stm32f429 MCU bfbc4b482078 ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards 34ec6702a2a1 ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin 44f4e344f4f0 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 3534a4b2d059 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 8da771b5527c arm64: dts: qcom: sc7180: Move rmtfs memory region a74d3bbe0553 ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant e89f4098d528 ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees c8815d6fee79 arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction 28d2ae98154e ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names a73a22a69f6a ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ddf2d14894d0 ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios a09b4c444941 ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios 3f0948569997 kbuild: sink stdout from cmd for silent build 27582c9fa294 rtc: mxc_v2: add missing MODULE_DEVICE_TABLE 6f5891a560df ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value 5190a6604a10 ARM: dts: ux500: Fix orientation of accelerometer 61fda04276bb ARM: dts: ux500: Rename gpio-controller node 985947c53555 ARM: dts: ux500: Fix interrupt cells ff9ef21bb6fb arm64: dts: rockchip: fix regulator-gpio states array 31e1b8c07d35 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info d05ebeffca1d ARM: dts: imx6: phyFLEX: Fix UART hardware flow control 249d8e4ea168 ARM: dts: Hurricane 2: Fix NAND nodes names f6541401dbd6 ARM: dts: BCM63xx: Fix NAND nodes names b5fc6b9ab427 ARM: NSP: dts: fix NAND nodes names 5f844007eb91 ARM: Cygnus: dts: fix NAND nodes names 9525d58c5af8 ARM: brcmstb: dts: fix NAND nodes names 4e8eb51ae633 reset: ti-syscon: fix to_ti_syscon_reset_data macro cabcb576fc3e arm64: dts: rockchip: Fix power-controller node names for rk3399 81ea23d988f9 arm64: dts: rockchip: Fix power-controller node names for rk3328 e4f97b740d6a arm64: dts: rockchip: Fix power-controller node names for px30 95b64be2e741 ARM: dts: rockchip: Fix power-controller node names for rk3288 5881af8d692b ARM: dts: rockchip: Fix power-controller node names for rk3188 70abb828312a ARM: dts: rockchip: Fix power-controller node names for rk3066a fc01549d7b87 ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x 55014c38e73d ARM: dts: rockchip: Fix the timer clocks order 2e1f681b680c arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi 7d3408c72336 ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 e2d1e4416174 ARM: dts: rockchip: Fix thermal sensor cells o rk322x c8f0cef75dd7 ARM: dts: gemini: add device_type on pci 191523dcfa68 ARM: dts: gemini: rename mdio to the right name Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ffmpeg: add libatomic for armv5Trevor Woerner2021-07-301-0/+1
| | | | | | | | | | | | | | | | | The GNU Atomic library is a GCC support runtime library for atomic operations not supported by hardware. Otherwise we get the following when building: | arm-oe-linux-gnueabi-gcc -mcpu=arm926ej-s -mfpu=vfp -mfloat-abi=hard -marm --sysroot=.../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot -Llibavcodec -Llibavdevice -Llibavfilter -Llibavformat -Llibavresample -Llibavutil -Llibpostproc -Llibswscale -Llibswresample -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed --sysroot=.../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot -mcpu=arm926ej-s -Wl,--as-needed -Wl,-z,noexecstack -Wl,--warn-common -Wl,-rpath-link=:libpostproc:libswresample:libswscale:libavfilter:libavdevice:libavformat:libavcodec:libavutil:libavresample -o ffprobe_g fftools/cmdutils.o fftools/ffprobe.o -lavdevice -lavfilter -lavformat -lavcodec -lavresample -lswresample -lswscale -lavutil -lm -lxcb -lxcb-shm -lxcb-shape -lxcb-xfixes -lasound -lXv -lX11 -lXext -pthread -lm -lm -lbz2 -lz -pthread -lm -llzma -lz -ltheoraenc -ltheoradec -logg -lm -lm -lm -pthread -lm -lXv -lX11 -lXext | .../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/11.1.1/ld: libavformat/libavformat.so: undefined reference to `__atomic_fetch_sub_8' | .../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/11.1.1/ld: libavformat/libavformat.so: undefined reference to `__atomic_store_8' | .../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/11.1.1/ld: libavformat/libavformat.so: undefined reference to `__atomic_load_8' | .../build/tmp-glibc/work/armv5ehf-vfp-oe-linux-gnueabi/ffmpeg/4.4-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/11.1.1/ld: libavformat/libavformat.so: undefined reference to `__atomic_fetch_add_8' | collect2: error: ld returned 1 exit status Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta-skeleton: add recipe examples from documentation sourcesMichael Opdenacker2021-07-304-0/+48
| | | | | | | | | | | | | | | | | | | | This adds three examples previously located in the yocto-docs repository (under documentation/ref-manual/examples). The examples were not used for building the documentation so it's better to keep them here where they can automatically be tested. Fixed the "hello-single" to add a version number to the .bb file. After this, all examples build fine with the "master" branch of Poky. Note that the "mtd-utils" example, and example of a recipe for an Autotools page, was not copied over. It doesn't build any more, and anyway, we already have an official recipe for a recent version of "mtd-utils" in OE-core. Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* zstd: fix CVE_PRODUCTChen Qi2021-07-301-0/+2
| | | | | | | zstd uses 'zstandard' in NVD database. e.g. CVE-2021-24031 Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* diffoscope: upgrade 177 -> 178wangmy2021-07-301-1/+1
| | | | | Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* i2c-tools: upgrade 4.2 -> 4.3wangmy2021-07-301-1/+1
| | | | | | | | | | 4.3 (2021-07-22) decode-dimms: Attempt to decode LPDDR3 modules eeprom, eepromer: Removed the tools in favor of eeprog i2cdetect: Sort the bus list by number Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: upgrade 9.16.18 -> 9.16.19wangmy2021-07-3010-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | --- 9.16.19 released --- 5671. [bug] A race condition could occur where two threads were competing for the same set of key file locks, leading to a deadlock. This has been fixed. [GL #2786] 5670. [bug] create_keydata() created an invalid placeholder keydata record upon a refresh failure, which prevented the database of managed keys from subsequently being read back. This has been fixed. [GL #2686] 5669. [func] KASP support was extended with the "check DS" feature. Zones with "dnssec-policy" and "parental-agents" configured now check for DS presence and can perform automatic KSK rollovers. [GL #1126] 5668. [bug] Rescheduling a setnsec3param() task when a zone failed to load on startup caused a hang on shutdown. This has been fixed. [GL #2791] 5667. [bug] The configuration-checking code failed to account for the inheritance rules of the "dnssec-policy" option. This has been fixed. [GL #2780] 5666. [doc] The safe "edns-udp-size" value was tweaked to match the probing value from BIND 9.16 for better compatibility. [GL #2183] 5665. [bug] If nsupdate sends an SOA request and receives a REFUSED response, it now fails over to the next available server. [GL #2758] 5664. [func] For UDP messages larger than the path MTU, named now sends an empty response with the TC (TrunCated) bit set. In addition, setting the DF (Don't Fragment) flag on outgoing UDP sockets was re-enabled. [GL #2790] 5662. [bug] Views with recursion disabled are now configured with a default cache size of 2 MB unless "max-cache-size" is explicitly set. This prevents cache RBT hash tables from being needlessly preallocated for such views. [GL #2777] 5661. [bug] Change 5644 inadvertently introduced a deadlock: when locking the key file mutex for each zone structure in a different view, the "in-view" logic was not considered. This has been fixed. [GL #2783] 5658. [bug] Increasing "max-cache-size" for a running named instance (using "rndc reconfig") did not cause the hash tables used by cache databases to be grown accordingly. This has been fixed. [GL #2770] 5655. [bug] Signed, insecure delegation responses prepared by named either lacked the necessary NSEC records or contained duplicate NSEC records when both wildcard expansion and CNAME chaining were required to prepare the response. This has been fixed. [GL #2759] 5653. [bug] A bug that caused the NSEC3 salt to be changed on every restart for zones using KASP has been fixed. [GL #2725] Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* shadow: update 4.8.1 -> 4.9Alexander Kanavin2021-07-307-335/+167
| | | | | | | | | | | | | | | Add a couple backports to fix builds. Drop 0002-Allow-for-setting-password-in-clear-text.patch; what it adds is horribly insecure and AB testing didn't reveal any regressions or use cases for it. Drop /etc/default/ tweaks as files are no longer installed there. Drop manpage alternatives as manpages are no longer installed. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: add core-image-weston to no-gpl3-no-meta-gpl2 image testAlexander Kanavin2021-07-301-8/+20
| | | | | | | | | This demonstrates more of the tricks and techniques that can be used to achieve gpl3-free images withough having to roll back to ancient versions of various core items via meta-gpl2. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rpm: do not RRECOMMEND rpm-buildAlexander Kanavin2021-07-301-1/+1
| | | | | | | | | This avoids pulling in perl, python and (especially) bash; rpm building functionality should be neither hard nor soft dependency of rpm package management. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: print a warning on upgrades if PREFERRED_VERSION is setAlexander Kanavin2021-07-301-0/+3
| | | | | Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* freetype: update 2.10.4 -> 2.11.0Alexander Kanavin2021-07-302-5/+22
| | | | | | | License-Update: formatting, changed location in source tree. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* iputils: update 20210202 -> 20210722Alexander Kanavin2021-07-302-26/+7
| | | | | | | | Drop rdisc part from 0001-rarpd-rdisc-Drop-PrivateUsers.patch as it's been fixed upstream; rarpd still isn't. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* util-linux: update 2.37 -> 2.37.1Alexander Kanavin2021-07-3010-351/+1
| | | | | | | Drop backports. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mtools: update 4.0.32 -> 4.0.34Alexander Kanavin2021-07-303-22/+3
| | | | | | | | Drop no-x11.gplv3.patch (the libraries are now dynamically enabled from configure.in). Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake: update 3.21.0 -> 3.21.1Alexander Kanavin2021-07-303-1/+1
| | | | | Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.conf: Require bitbake 1.51.1Richard Purdie2021-07-301-1/+1
| | | | | | We require 1.51.1 which has the override syntax changes in it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* local.conf.sample: Bump version so users update their configRichard Purdie2021-07-302-2/+2
| | | | | | | | It has been a while since we've done this but with the new syntax, users need to update their local.conf if based off the template. Update the versions to trigger this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Manual override fixesRichard Purdie2021-07-3021-39/+41
| | | | | | | | The automated conversion of OE-Core to use the new override sytax isn't perfect. This patches some mis-converted lines and some lines which were missed by the automation. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Convert to new override syntaxRichard Purdie2021-07-30992-10101/+10102
| | | | | | | | | | This is the result of automated script conversion: scripts/contrib/convert-overrides.py <oe-core directory> converting the metadata to use ":" as the override character instead of "_". Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* layer.conf: Override changes mean we're only compatible with honisterRichard Purdie2021-07-301-1/+1
| | | | | | | Due to the override changes, we only allow compatibility with honister and not hardknott. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* convert-overrides.py: allow specifying multiple target dirsMartin Jansa2021-07-301-13/+13
| | | | | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* convert-overrides.py: 0.9.1 include '(' as delimiter for shortvarsMartin Jansa2021-07-301-2/+2
| | | | | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemtap: Fix headers issue with x86 and 5.13 headersRichard Purdie2021-07-302-0/+27
| | | | | | | | | | | On some x86 platforms there were header issues causing pt_regs compile failures for our stap tests, e.g. on genericx86-64 but not qemux86-64. Backport a patch from upstream which fixes the issue. [YOCTO #14491] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* convert-overrides.py: remove base_dep_prepend and autotools_dep_prepend ↵Martin Jansa2021-07-301-6/+0
| | | | | | | | | | exception * the functions were renamed in: https://git.openembedded.org/openembedded-core/commit/?id=9d002acae720b0a8e96a6734424a142b86880461 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* convert-overrides.py: show processed file and version of this scriptMartin Jansa2021-07-301-0/+4
| | | | | | | | | * on bigger layer this script takes couple minutes without showing any progress * add a version to reference it in the conversion commit (to easily figure out if it's worth re-converting the layer). Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/contrib: Add override conversion scriptRichard Purdie2021-07-301-0/+141
| | | | | | | | | | | | | | | | | This adds a script I've developed to migrate metadata to use the new override syntax. It is a bit rough but since its for a single use with validation, it doesn't need to be perfect. It is run simply as: scripts/contrib/convert-overrides.py <directory> It is setup and has been tested to work with OE-Core, Bitbake, yocto-docs, meta-yocto, meta-gplv2 and meta-mingw. For OE-Core, it converts around 10,100 lines with about 34 manual fixes needed. For other layers it would need updating for override names and exclusions for functions/variable names with "append", "prepend" or "remove" in them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autotools/base/icecc: Remove prepend from function namesRichard Purdie2021-07-303-7/+7
| | | | | | | | Using prepend as part of a function name is a poor choice. Whilst we're about to make the syntax explict, improve the names anyway making the conversion easier and the intent clear that this isn't an override. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* parselogs.py: qemuarm should be qemuarmv5Jon Mason2021-07-291-1/+2
| | | | | | | | | | All of the errors being masked off for qemuarm are legacy from before the migration of qemuarm to qemuarmv5. Rename the machine to that to allow for qemuarmv5 to pass parselog test. Light testing shows no errors in dmesg for qemuarm. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libx11: fix xkb compilation with _EVDEVK symbolsRoss Burton2021-07-292-0/+47
| | | | | | | | | | New xkeyboard-config writes defines that use _EVDEVK(), which makekeys can't parse. Take a patch from upstream to also parse these symbols. [ YOCTO #14489 ] Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perlcross: not break build if already patchedMingli Yu2021-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the build will break if the patch already applied as the return value of "test ! -f $@" is not 0, so make sure to return 0 if the patch already applied. Fixes: $ bitbake perl-native Make a change as below $ git diff diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb index b77bbd1fd4..4c5e35ab80 100644 --- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb +++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb @@ -33,6 +33,7 @@ do_compile () { do_install_class-native() { mkdir -p ${D}/${datadir}/perl-cross/ cp -rf ${S}/* ${D}/${datadir}/perl-cross/ + echo "test" > ${D}/${datadir}/perl-cross/testfile } $ bitbake perl-native NOTE: make -j 40 make crosspatch make[1]: Entering directory '/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' test ! -f cnf/diffs/perl5-5.34.0/posix-makefile.applied && (patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied) test ! -f cnf/diffs/perl5-5.34.0/dynaloader.applied && (patch -p1 -i cnf/diffs/perl5-5.34.0/dynaloader.patch && touch cnf/diffs/perl5-5.34.0/dynaloader.applied) make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/posix-makefile.applied] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/dynaloader.applied] Error 1 make[1]: Leaving directory '/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' make: *** [Makefile:78: all] Error 2 Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* archiver.bbclass: fix do_ar_configured failure for kernelChangqing Li2021-07-281-1/+4
| | | | | | Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>