aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-08-31qemurunner.py/qemutinyrunner.py: remove runqemu-internalRobert Yang
There is no runqemu-internal any more. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31nativesdk-qemu-helper: fix for new runqemuRobert Yang
There is no runqemu-internal anymore, and it is a python script now which requires several python modules. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31runqemu: refactor it and remove machine knowledgeRobert Yang
Previously, runqemu had hard coded machine knowledge, which limited its usage, for example, qemu can boot genericx86, but runqemu can't, we need edit runqemu/runqemu-internal a lot if we want to boot genericx86. Now bsp conf files can set vars to make it can be boot by runqemu, and qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf. Please see qemuboot.bbclass' comments on how to set the vars. * Re-write it in python3, which can reduce lines from 1239 to about 750 lines * All the machine knowledges are gone * All of the TUN_ARCH knowledge are gone * All the previous options are preserved, and there is a new way to run runqemu: (it doesn't need run "bitake -e" in such a case) $ runqemu tmp/deploy/images/qemux86 or: $ runqemu tmp/deploy/images/qemuarm/<image>.ext4 or: $ runqemu tmp/deploy/images/qemuarm/qemuboot.conf * Fixed audio support, not limited on x86 or x86_64 * Fix SLIRP mode, add help message, avoid mixing with tap * Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after stop. * More bsps can be boot, such as genericx86 and genericx86-64. * The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to meta-xilinx' mailing list. * I can't find any qemush4 bsp or how to build it, so it is not considered atm. [YOCTO #1018] [YOCTO #4827] [YOCTO #7459] [YOCTO #7887] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemu.inc: inherit qemuboot.bbclassRobert Yang
All qemu boards should be able to boot by runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemuppc.conf: set vars for runqemuRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemumips/qemumips64.conf: set vars for runqemuRobert Yang
Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps which can be boot by runqemu can require qemuboot-mips.inc Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemux86.conf/qemux86-64.conf: set vars for runqemuRobert Yang
Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps which can be boot by runqemu can require qemuboot-x86.inc. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemuarm64.conf: set vars for runqemuRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemuarm.conf: set vars for runqemuRobert Yang
These info are from old runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31qemuboot.bbclass: add it for runqemuRobert Yang
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu will read it. The bsp which can be boot by runqemu will inherit it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31x264: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31systemtap: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31linux-libc-headers: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31lsof: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31musl: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31ifupdown: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31kernel.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31distutils-common-base.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31autotools.bbclass: remove EXTRA_OEMAKE workaroundStefan Müller-Klieser
The default of EXTRA_OEMAKE is already empty since commit: OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31libnl: backport musl fix (strerror_r / strerror_l)André Draszik
musl doesn't implement the non-posix compliant, deprecated, glibc-only special version of strerror_r that libnl had been using so far. Backport the patch(set) that switches libnl over to using strerror_l(). Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31libnl: update to v3.2.28André Draszik
See http://lists.infradead.org/pipermail/libnl/2016-August/002187.html http://lists.infradead.org/pipermail/libnl/2016-August/002200.html Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31libnl: fix packaging mistakesAndré Draszik
- *.la files belong into -dev packages - the genl-ctrl-list command line utility should go to into the CLI package, so as to prevent the libnl-genl library package from pulling in all of the command line utilities (as genl-ctrl-list is linked against libnl-cli-3.so.200) Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: include commands log file name in results.jsonMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: include buildstats file name in results.jsonMarkus Lehtonen
No need to do lsdir magic for finding buildstats when reading results. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: show skipped tests in results, tooMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: convert buildstats into json formatMarkus Lehtonen
Instead of archiving buildstats in raw text file format convert all buildstats into one json-formatted file. Some redundant information, i.e. 'Event:', 'utime:', 'stime:', 'cutime:' and 'cstime:' fields, are dropped. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: measure io statMarkus Lehtonen
Add data from /proc/<pid>/io to system resource measurements. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: don't use Gnu timeMarkus Lehtonen
Use Python standard library functionality instead of the time utility for measuring elapsed (wall clock) time of commands. The time.* log files are also ditched. However, the same detailed resource usage data, previously found in time.* logs is now provided in results.json file. This data is collected through the resource module of Python. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: rename buildstats directoriesMarkus Lehtonen
Change directory name from 'buildstats-<test_name>' to just 'buildstats'. However, this patch adds the possibility to label buildstats directory name with a postfix which makes it possible to save multiple buildstats per test, for example. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: separate output dir for each testMarkus Lehtonen
Store the output data of each test in an individual subdirectory instead of storing everything in the root output directory. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: strip date from buildstats directory pathMarkus Lehtonen
Archive buildstats in a directory like 'buildstats' instead of something like 'buildstats/20160513120000'. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oe-build-perf-test: rename log file and implement --log-fileMarkus Lehtonen
Rename the (main) log file of the oe-build-perf-test script from 'output.log' to 'oe-build-perf-test.log'. Also, add a new command line option --log-file which makes it possible to use an alternative log file name/path, if needed. Note that the file name/path is relative to the output directory. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: enable json-formatted resultsMarkus Lehtonen
Automatically create a json.formatted file (results.json) in the results directory that contains results from all tests. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: add 'product' to test result dataMarkus Lehtonen
This defaults to 'oe-core' but can be defined using the OE_BUILDPERF_PRODUCT environment variable. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oe-build-perf-test: update globalres and git even if tests failedMarkus Lehtonen
Write globalres log file and commit results to Git even if some tests failed. Now that tests do not depend on each other there should be no risk of bogus results caused by test failures. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: treat failed measurements as errorsMarkus Lehtonen
Now failed measurements correctly cause a test failure (recorded as an error). There should be no need to continue the test if one step fails, especially now that the tests don't depend on each other. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: make tests independentMarkus Lehtonen
Add test set-up functionality so that the individual tests do not depend on each other. This should make sure that a failure in one test does not affect the results of another test. The patch also makes it reasonable to run only a subset of the tests by using the --run-tests option. The increase in total execution time of the full suite - caused by the additional set-up steps - is insignificant because normally no additional tasks need to be run. The previous test has already done all set-up work. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.buildperf: fix checking of invalid resultsMarkus Lehtonen
The test status check done when writing globalres log was incorrect. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31flex: fix gcc-6 failureAndreas Müller
Gcc-6 does not allow c++ comments withing c-code. Files generated by flex can fail with: | error: C++ style comments are not allowed in ISO C90 | num_to_alloc = 1; // After all that talk, this was set to 1 anyways... Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31x11-common: Remove Xserver scriptJussi Kukkonen
X startup is now handled in xserver-nodm-init. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31xserver-nodm-init: Deprecate /etc/X11/XserverJussi Kukkonen
This commit should provide the same functionality as before, but should make meta-oe xserver-nodm-init-2.0 obsolete as well as keep systemd and sysvinit startup better in sync. /etc/X11/Xserver is not called anymore: it is provided by both x11-common and xserver-common with no useful differences (but some annoying ones). Instead xserver-nodm-init provides /etc/xserver-nodm/Xserver as the startup script and /etc/default/xserver-nodm as the default settings file. These are used by both init systems. The Xserver script could be completely removed (with sysv and systemd calling xinit directly), but to keep compatibility with meta-oes xserver-nodm-init-2.0 the Xserver script sources /etc/X11/xserver-common if one exists -- and systemd EnvironmentFile cannot do that. x11-common used to have a packageconfig to easily control screen blanking. Move this to xserver-nodm-init. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31base-files: Add shell test quotingJussi Kukkonen
tty can return "not a tt" which results in warnings when /etc/profile is executed. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31meta-ide-support: inherit nopackagesJackie Huang
The recipe is to generate an environment script in do_populate_ide_support for using an IDE and it doesn't generate packages at all, so inherit nopackages Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31libyaml: update to 0.1.7Alexander Kanavin
Drop backported libyaml-CVE-2014-9130.patch Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31ffmpeg: update to 3.1.3Alexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31iso-codes: update to 3.70Alexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31gstreamer1.0: upgrade to 1.8.3Maxin B. John
1.8.2 -> 1.8.3 Remove backported patch from 1.8.3: 0007-glplugin-gleffects-fix-little-rectangel-appears-at-t.patch Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31sqlite3: upgrade to 3.14.1Maxin B. John
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oeqa.selftest.liboe: add test for xattr in copytreeJoshua Lock
Add a test to ensure that oe.path.copytree() preserves extended attributes on files. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-31oe.path: preserve xattr in copytree() and copyhardlinktree()Joshua Lock
Pass appropriate options to tar invocations in copytree() and copyhardlinktree() to ensure that any extended attributes on the files are preserved during the copy. We have to drop the use cpio in "Copy-pass" mode in copyhardlinktree() because cpio doesn't support extended attributes on files. Instead we revert back to using cp with different patterns depending on whether or not the directory contains dot files. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-26 13:08:58 +0000