aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-11-06.gitignore: Update after documentation layout changesRichard Purdie
2010-11-04docmentation/poky-ref-manual: Remove unused Indexes titleRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-04Performed general edits to this chapter.Scott Rifenbark
many english corrections performed. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Poky Reference Manual: Completed editing pass of Chapter 3.Scott Rifenbark
I completed the editing pass of this chapter by doing sections 3.3.3 on. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Created a new folder to hold the BSP GuideScott Rifenbark
I created a new sub folder to hold the BSP Guide by itself so there are three folders now for each of the Yocto manuals: BSP Guide, quick start and poky ref manual. The new folder for the BSP guide is 'bsp-guide'. It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file, and its own 'Figures' directory. The 'bsp-guide.xml' file that was in the poky reference folder was deleted. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04General edits to the using poky and Extending Poky chapters.Scott Rifenbark
I completed general edits to the second chapter of the poky reference manual. These edits went from section 2.4.5 through the end of the chapter. They consist of text rewrites for more active voice and follow general technical writing principles. I completed the same types of edits in the third chapter of the manual from the beginning through section 3.3.2. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04General text edits through section 2.4.4 "General Bitbak Problems"Scott Rifenbark
Extensive language and consistency edits being applied to the manual. During the 0.9 push I did not have time to make a pass through the document. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Changed a source command to have the correct source.Scott Rifenbark
Changed "source poky-4.0/poky-init-build-env poky-4.0-build" to be "source poky-laverne-4.0/poky-init-build-env poky-4.0-build" Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Changed the title and wording of the section about pre-built binaries.Scott Rifenbark
There was a grammatical error in the title and redundancy in the first sentence of this section. Cleaned up the title and wording. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Editing pass through the Introduction chapter.Scott Rifenbark
I did a complete edit pass through this chapter. The manual has not been fully edited from its original state. One critical technical correction was corrected where the green-3.3 release was referenced. I changed this to laverne 4.0. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Figure changed for building an image and yoctolinux removedScott Rifenbark
I changed the figure that goes along with building an image based on Kevin's input. Also, removed several URLs that had 'yoctolinux' in them along with a 'tar' command example with the same string. LF does not want these in there. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-03cross-canadian bbclass: replace hardcoded -pokysdk with SDK_VENDORKoen Kooi
Signed-off-by: Koen Kooi <k-kooi@ti.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-03openssl: Use STAGING_BINDIR_NATIVE as the path to perl, not bindir which can ↵Richard Purdie
point to incorrect places Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02sstate: Provide a temporary mechanism to stop collisions between toolchain ↵Richard Purdie
components in builds from scratch using sstate Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02bitbake/siggen: Provide better warnings about empty tasksRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02external-python-tarball: Include SDKMACHINE in tarball nameRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02external-python-tarball: Add ability to generate an externally usable ↵Richard Purdie
standalone python tarball Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02openssl/db/gdbm: Extend to provide BBCLASSEXTEND nativesdkRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02python: Remove hardcoded python references and replace with PN, allowing use ↵Richard Purdie
of BBCLASSEXTEND=nativesdk Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base/utils.bbclass: Sync up overlapping functionsRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02utils.bbclass: Add functions from OE.devRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02gnome.bbclass: Remove autotools_stage referenceRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02gnome.bbclass: Use BPN instead of PN and set SRC_URI name similar to OE.devRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02meta-emenlow: Rename packages to recipes in line with main repositoryRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base-files: Allow a basic issue file to be extended by the code, following ↵Richard Purdie
the method now used by OE Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base-files: Allow issue and hostname generation to be overriddenRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-01src_distribute: Set EXPORT_FUNCTIONS correctlyRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-01bitbake/siggen: Fix finalise call argumentsRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Poky -> Yocto name changeRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation: Update copyright to the Linux FoundationRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation/yocto-qs: Fix references to a poky-qemu package and replace ↵Richard Purdie
with the yocto toolchain tarball Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Removed text from section 5.1.2.1.1.Scott Rifenbark
Removed several blocks of text from section 5.1.2.1.1 "Installing and Setting up the Eclipse IDE". This text according to Jessica was no longer needed.
2010-10-27Corrected the package command for Debian-based hosts.Scott Rifenbark
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev. Also added the package mercurial. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Added package installation requirements.Scott Rifenbark
Added commands to support package installation of RPM-based host systems to the example. Input based on feedback from Dirk. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-inserted Poky Image as part of the front matter.Scott Rifenbark
I have inserted the Poky image in the front matter again because the book is a Poky Guide. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation/poky-ref-manual: Fix image makefile to reference the imageRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Moved the Poky image file to the "Figures" folder.Scott Rifenbark
The image file was in the same directory as the main reference manual files. So I moved the file into subdirectory "Figures" with other figures. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-installed the Poky Handbook image at the top of the manualScott Rifenbark
I could not get the Yocto Project logo to appear correctly in the book after the title. I also decided that since Poky is by no means going away that this book should have that image associated with it as it is the Poky Reference Manual. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated the yocto-environment picture and added example command edits.Scott Rifenbark
When scaled to fit the page the picture had a black vertical line artifact to the right. I snipped out the image a little tigher to eliminate this line. I also incorporated Dirk's comments tightening up the sequence of example commands to do the build. I incorporated Fedora 14 note and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27docmentation/yocto-project-qs: Fix Yocto Environment graphicRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Removed first link to openembedded and replaced with more general text.Scott Rifenbark
The link to openembedded was used to reference Linux distributions supporting Yocto Project. The link has been removed and replaced with more generic text so as to not have to link to openembedded. Text used is "A Host system running a supported Linux distribution (i.e. recent releases of Fedora, OpenSUSE, Debian, and Ubuntu)." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated the first figure in the quick start.Scott Rifenbark
This conceptual figure has been replaced by a more detailed work flow representing YP. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Corrected link to the yocto website.Scott Rifenbark
This link was incorrect and has been changed to yoctoproject.com. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated supporting text to reflect new poky-4.0-build directory in exampleScott Rifenbark
The example commands that build an image were updated to reflect the real 4.0 release. I updated the paragraph after the example commands to refer to the new release used in the command examples. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation-project-qs: Remove stray ]Richard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation/qs-guide: Fix urls for releaseRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Edits as described below:Scott Rifenbark
1) Wording change based on Darren's input of making Linux kernel sound like the only open source part of YL 2) Removal of the "v" option for the tar command example. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Review changes applied.Scott Rifenbark
1. Added Richard Purdie's general editing feedback to the "Welcome" and "Introducing the Yocto Project Development Environment" sections. 2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed the order of the sample "cd" and "source" commands since the "source" command builds the directory structure first so changing to the directory before running "source" made no sense, 3) removed the "bitbake qemu-native" command. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated figure.Scott Rifenbark
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather than "Target." Also that the two inner boxes be "Set of Emulated Devices" and "Target CPU." Final change was the use of "Yocto Project Scripts" rather than "Yocto Linux Scripts." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Updated this figure to correctly capaitalize opkg, zyper, and app-getScott Rifenbark
Feedback from Kevin Tian suggested "OPKG" should be lower-case. Also, use of "zypper" instead of "YUM." I also lower-cased "apt-get." Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-15 05:46:48 +0000