Age | Commit message (Collapse) | Author |
|
file support
Depending on whether large file support is enabled, the size of ino_t can
be 4 or 8 on 32 bit x86. Drop the value from the site cache and allow the
system to vary it depending on configuration. Very few other arches actually set
this so its likely obsolete and doesn't need to be hardcoded anymore.
Also drop the 64 bit and x32 variants since autodetection of this value appears
to work fine and this avoids any confusion or sizing errors depending on large
file support.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a new task "reproducible_final_image_task".
If binary reproducibility is desired ($BUILD_REPRODUCIBLE_BINARIES" = "1"),
then recursivley modify mtimes of all files to a reproducible vale.
The value is obtained via REPRODUCIBLE_TIMESTAMP_ROOTFS.
This task is executed as the very last step in image creation, once all
the files in the image have been finalized.
[YOCTO#11176]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Several tweaks to improve reproducibility:
1. If BUILD_REPRODUCIBLE_BINARIES == 1, set KBUILD_BUILD_TIMESTAMP
to a reproducible value. This is either a non-zero SOURCE_DATE_EPOCH, or the
value obtained from top entry of GIT repo, or (if there is no GIT repo)
fallback to REPRODUCIBLE_TIMESTAMP_ROOTFS as the last resort.
Also export KCONFIG_NOTIMESTAMP=1.
2. When compressing vmlinux.gz, use gzip "-n" option
3. Kernel and kernel modules contain hard coded paths referencing the host
build system. This is usually because the source code contains __FILE__
at some place. This prevents binary reproducibility. However, some compilers
allow remapping of the __FILE__ value. If we detect the compiler is capable
of doing this, we replace the source path $(S) part of __FILE__ by a string "/kernel-source".
For example:
/data/master/build/tmp/work-shared/qemux86/kernel-source/drivers/media/v4l2-core/videobuf2-core.c
will be replaced by a reproducible value:
/kernel-source/drivers/media/v4l2-core/videobuf2-core.c.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Conditionally support binary reproducibility in built images.
If BUILD_REPRODUCIBLE_BINARIES = 1 then:
1. Do not randomize library addresses
2. Set/export PRELINK_TIMESTAMP to a reproducible value.
If REPRODUCIBLE_TIMESTAMP_ROOTFS is specified, then the value will
be used. Otherwise the timestamp will be derived from the top git commit.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For reproducible builds do not generate build timestamp as part of
the version string.
Remove host tools references from .config file.
With this patch all eight busybox packages are built as
binary reproducible.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The compiled .pyc files contain time stamp corresponding to the compile time.
This prevents binary reproducibility. This patch allows to achieve binary
reproducibility by overriding the build time stamp by the value
exported via SOURCE_DATE_EPOCH.
Patch by Bernhard M. Wiedemann.
[YOCTO#11241]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order for u-boot to work on Nios II architecture,
the device tree file requires adding pre-relocation
flag to the CPU node.
Patch is tested on 10m50 board. Pass booting up
Linux.
[YOCTO #11628]
Signed-off-by: Gan, Yau Wai <yau.wai.gan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When compressing by gzip, do not save the original file name and time stamp.
[YOCTO #11916]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python3-docutils recipe must be upgraded to latest stable release.
LIC_FILES_CHKSUM changed due to a typo fix from previous version,
but license type and information remained the same.
This change was tested on qemu with core-image-minimal.
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Both python-setuptools and python3-setuptools must be updated
to latest stable release.
These changes were tested on qemu with core-image-minimal
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix to create configuration file related to /var/log/sa for sysvinit
and systemd systems respectively.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use git rev-parse to determine the location of the .git directory, in
case it is not an immediate child of EXTERNALSRC (e.g. when using
submodules). In the event git can't resolve the .git directory, fall
back to the non-git method for hashing.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1. Drop 4 patches because the upstream already contains them:
0001-dirtyc0w-Include-stdint.h.patch
0006-fix-PATH_MAX-undeclared-when-building-with-musl.patch
0037-faccessat-and-fchmodat-Fix-build-warnings.patch
0038-syscalls-add_key02-update-to-test-fix-for-nonempty-N.patch
2. Drop the do_compile_prepend function, because the upstream already fix
the parallel make race, we can check it here:
https://github.com/linux-test-project/ltp/commit/3f385652efe811fe7491474f8513baf44cf0a12d
3. Fix PAGE_SIZE redefinition and O_CREAT undeclear build failures when using musl
4. Fix runtime failed case file01
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intel vulkan driver requires libdrm-intel: Only enable it when
building for x86 or x86-64 similar to DRI drivers.
Building on non-x86* with vulkan leads to "--with-vulkan-drivers= ":
this is interpreted correctly by the build system.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating a custom image which uses the DATE variable the basehash
seems to change every day and lead to errors such as:
ERROR: console-tdx-image-2.7.6-r0 do_image_customimg: Error executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:set_image_size(d)
...
Add DATE to the variables which should not get expanded early and to the
vardepsexclude list for the image task.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Reported-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 4a425d05bac5dcba023b67aa3d726f7e7869404f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Reported-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 16b7b455ee40fd1be5bb9aacf24b106df0d9325e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Reported-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 94fabe4b03e899d8876027ee2ced649737a9e522)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* since following commit:
commit 2ff9d40dc88d43567472218cf3d3faf414398c71
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sun Jul 30 16:06:57 2017 +0100
image/rm_work: Promote do_image_complete to be more sstate like
all image rm_work tasks are failing with:
mv: 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3 and
1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3 are the same file
it's because for $i 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3
there will be first SSTATETASK in $j do_deploy, so the sed call doesn't replace anything
It might be different order of SSTATETASKS in my builds (it might work only when
do_image_complete is the first one in the list), but here:
SSTATETASKS="do_deploy do_image_complete do_image_qa do_package do_package_qa do_package_write_ipk do_packagedata do_populate_lic do_populate_sdk do_populate_sdk_ext do_populate_sysroot"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
clang 5.0 has a codegen bug when compiling musl in thumb2 mode see
https://bugs.llvm.org/show_bug.cgi?id=34165
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove backported patch:
1. vaapivideobufferpool-create-allocator-if-needed.patch
* Add PACKAGECONFIG_GL variable to make it possible for BSP layers to
customize what should be the default, EGL or GLX
* Set virtual/egl instead of virtual/mesa as egl dependency in case
platform specific drivers provide virtual/egl functionality
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* libmad plugin was removed in 1.12.0, since mad is GPLed,
unmaintained, and both gst-libav & the mpg123 plugin are
fully functional alternatives.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove backported patches:
1. 0001-smoothstreaming-implement-adaptivedemux-s-get_live_s.patch
2. 0001-smoothstreaming-use-the-duration-from-the-list-of-fr.patch
3. 0001-mssdemux-improved-live-playback-support.patch
* Refreshed the following patches:
1. 0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch
Extended patch to include fix for libgstallocators
2. 0001-Prepend-PKG_CONFIG_SYSROOT_DIR-to-pkg-config-output.patch
Updated to apply to 1.12.2
3. gstreamer-gl.pc.in-don-t-append-GL_CFLAGS-to-CFLAGS.patch
Updated to apply to 1.12.2
* Removed license checks in tta directory as it doesn't exist anymore.
* In 1.12.0, old unsupported plugins were removed. As a result, the
list of unsupported plugins was removed.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove backported patch:
1. 0001-v4l2object-Also-add-videometa-if-there-is-padding-to.patch
* Added RPROVIDES to handle the renamed plugins (oss4 is not enabled):
1. libgstpulse -> libgstpulseaudio
2. libgstsouphttpsrc -> libgstsoup
* Updated gstreamer1.0-meta-base to include this change:
1.gstsouphttpsrc plugin was renamed to gstsoup
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove upstreamed patch:
1. encodebin-Need-more-buffers-in-output-queue-for-bett.patch
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Version 1.12 introduces support for libdw (provided by elfutils).
libdw adds source lines & numbers to backtraces. A new "dw"
packageconfig added for enabling/disabling this feature.
In addition, the old patch for deterministic unwind configuration
was replaced with one that also allows the same for the dw
configuration. This new patch was also submitted to bugzilla.
* Leftover docbook cruft was removed, meaning that the
"--disable-docbook" configure switch is gone.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
... instead of a global exception list which was problematic.
[YOCTO #11896]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Gentoo server can be very slow to list the tarball directory.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Gentoo is removing the package due to dead upstream;
Debian might carry it for a while longer.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are optional per-recipe variables with the following meaning:
UPSTREAM_VERSION_UNKNOWN - set if the upstream version check fails reliably,
e.g. absent git tags, or weird version format used on our or on upstream side.
If this variable is not set and version check fails, or if it is set and
the version check succeeds, then the checkpkg selftest for the recipe will fail.
UPSTREAM_CHECK_UNRELIABLE - set if the upstream check cannot be reliably performed
due to transient network failures, or server behaving weirdly. This one should be used
sparingly, as it completely excludes a recipe from upstream checking, and thus
we don't get automatically notified about new upstream releases.
Also the upstream status string in the checkpkg csv output is clarified with the following
possible values:
MATCH - recipe is providing the latest upstream version
UPDATE - there is a new version released by upstream, recipe should be updated
CHECK_IS_UNRELIABLE - an upstream check was skipped as requested by recipe
via UPSTREAM_CHECK_UNRELIABLE
UNKNOWN - upstream version check was performed, but the upstream verison could
not be determined. The recipe acknowledges this via UPSTREAM_VERSION_UNKNOWN setting.
UNKNWON_BROKEN - same as previous, but the recipe does not include the acknowledgement
and should be fixed.
KNOWN_BROKEN - upstream check worked, but recipe claims it shouldn't; to fix this
remove UPSTREAM_VERSION_UNKNOWN from recipe.
[YOCTO #11896]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is an error for populate_sdk when we exclude package by using
PACKAGE_EXCLUDE.
Reproduced steps:
echo "PACKAGE_EXCLUDE = \"psplash\"" >> conf/local.conf
bitbake core-image-sato -c populate_sdk
Error log:
ERROR: core-image-sato-1.0-r0 do_populate_sdk: Could not invoke dnf.
Command '/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c
/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/dnf/dnf.conf
--setopt=reposdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/yum.repos.d
--repofrompath=oe-repo,/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
--installroot=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux
--setopt=logdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp
-x psplash --nogpgcheck install run-postinsts dnf
packagegroup-core-x11-base packagegroup-core-ssh-dropbear
packagegroup-core-standalone-sdk-target packagegroup-base-extended
packagegroup-core-x11-sato psplash packagegroup-core-boot rpm' returned 1:
Unable to detect release version (use '--releasever' to specify release version)
Added oe-repo repo from
/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:00 ago on Thu 10 Aug 2017 09:26:32 AM UTC.
No package psplash available.
Error: Unable to find a match
Add handling package exclusions to do_populate_sdk. The code copies from
do_rootfs in image.bbclass.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For some reason prelink was refusing to prelink musl images but now sometimes
does modify the binaries. Since musl has no support for this, such images
end up broken and unable to boot.
To avoid this, be explicit and only apply prelinking for libc-glibc.
[YOCTO #11913]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update LICENSE to BSD-3-Clause as per
https://github.com/numpy/numpy/blob/master/LICENSE.txt
LIC_FILES_CHKSUM changed due to copyright year change see
https://github.com/numpy/numpy/commit/b2ff4f13197dd58508d3d025a9034519974750bd
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It has not been ported to openssl 1.1 (and there's nothing in upstream git),
but it's possible to use nettle or gcrypt intead.
Also, provide a fallback option to use openssl 1.0 when necessary.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backport a commit from qemu upstream to fix a protection fault
https://lists.gnu.org/archive/html/qemu-devel/2013-04/msg00878.html
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
lld and gold can not handle it and treat it wrong
Fixes
[YOCTO #11689]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For perfomance reasons, limit the number of signature comparisons when
stamps differ. The limit set is hardcoded to 20.
[YOCTO #11651]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upstream ticket:
https://github.com/cryptodev-linux/cryptodev-linux/issues/22
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The proposed openssl 1.1 patches are here:
https://github.com/openssh/openssh-portable/pull/48
Openssl maintainers are not in a hurry to get 1.1 support in;
if it doesn't show up within reasonable time, we can take a patch
from Fedora:
http://lists.mindrot.org/pipermail/openssh-unix-dev/2016-November/035454.html
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Existing openssl 1.0 recipe is renamed to openssl10; it will
continue to be provided for as long as upstream supports it
(and there are still several recipes which do not work with openssl
1.1 due to API differences).
A few files (such as openssl binary) are no longer installed by openssl 1.0,
because they clash with openssl 1.1.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upstream lacks a tag for this release, so make it a PR bump.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test itself was removed but there were a few explicit checks and
dependencies for it, so remove those too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We've already removed unsafe-references-in-binaries (which was fundamentally
broken) and nobody really cares about / and /usr being on different filesystems
anymore (at least if they, they're keeping very quiet and not fixing the bugs).
As this test was a minor detail in the scope of supporting separate / and /usr
which we don't support, it can be removed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|