| Age | Commit message (Collapse) | Author |
|---|
|
To be compatible with ncurses 5, add option '--with-abi-version=5' to EXTRA_OECONF
Signed-off-by: Dengke Du <dengke.du@windriver.com>
|
|
(From meta-yocto rev: 0ac34a1d141fd759698ea6868caad5ca843d5796)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit e130dca85bac82bd4d88f94a6bf9fe36e8ad4d7c.
This is in fact a valid use case, for example the sstate.bbclass code
sets up SSTATE_MIRRORS as PREMIRRORS. Its quite common to map those
file:// urls to remote http:// urls and with the above change, this
no longer works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opkg-utils has more than one PACKAGECONFIG option enabled by default so wiping
out PACKAGECONFIG entirely breaks poky-tiny as then opkg-utils doesn't build an
update-alternatives binary.
Instead, use the _remove override to selectively disable Python in opkg-utils,
leaving update-alternatives present.
(From meta-yocto rev: 17d0862ebc3777d148e62fe9b69225eb4de2dfe0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This goes undetected most of the time, but when updating a repository,
if the ud.fullmirror file is not present, you end up getting an
exception instead of carrying on because the errno module is not
loaded (specifically "if exc.errno != errno.ENOENT").
(Bitbake rev: e6fca8480731ce817df9bee61438347a5e3d3017)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'stamp-base' and 'stamp-base-clean' related codes are no longer useful,
clean them up.
[YOCTO #8468]
(Bitbake rev: 7b4c42b315d4a26dd8f2ceb874a94737bf9f183e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the missing example machine configuration for qemumips64
(From meta-yocto rev: d2d22c5e47ee5d88a96b7fa29289278ee0c69eab)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debugging suggests that setscene tasks are being a little greedy about their
dependencies, for example, lsof is insisting that gcc-runtime's do_package
is installed. If it isn't, its requiring gcc to rebuild.
If gcc-runtime do_package_write_xxx and do_packagedata is available, there
is no reason do_package should be needed.
The reason this is happening appears to be from the batching up of task
dependencies code, rather than setscene tasks stopping when passing over
a setscene task, they were being carried forward. This patch fixes it
so the data is 'zeroed' when passing over a setscene task boundary,
which gives the dependency graph that is expected.
After this patch, lsof will rebuild quite happily without
gcc-runtime:do_package being present, as expected. This should lead to
less dependencies being installed for builds from sstate and generally
better performance in general.
(Bitbake rev: f8bcb0a1e3b008b71c9a7cd21f76d0906f2d8068)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the default toaster cache dir unique to the user running
toaster. If we have multiple users running toaster we previously
got a permission denied exception on saving a cache file.
[YOCTO #8782]
(Bitbake rev: 5207abdf58019271bf92bff4bcce3911b8691508)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the reverse build dependencies provided
through 'PROVIDES' in the 'Reverse build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: c7bb98e2e2111790ded86087b13c8b49462d6b75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the build dependencies provided through
'PROVIDES' in the 'Build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: de77e338fe70341fe98561e2e40b534f5c88db10)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed list of names that recipe provides.
(Bitbake rev: 60318c9a049292bd33322d8446a629d778337e8a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new entries to Provides model and link them to
Recipe_Dependency using 'via' field.
This data will be used by Toaster UI to show 'Provides:'
information for the recipes.
[YOCTO #6169]
(Bitbake rev: 336ddc8df611d4c8f1c3d3a06d0a85bb544c38bc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new model Provider and a foreign key 'via' to link
Recipe_Dependency to it.
[YOCTO #6169]
(Bitbake rev: e45fff6314741d46e2549b2f72ed380cbbb95593)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used providermap in store_dependency_information function
to find virtual dependencies. This should fix annoying
warnings "stpd: KeyError saving recipe dependency"
[YOCTO #6169]
(Bitbake rev: 85c416ca338c886db6e79651e44727482df9fb07)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added providermap information to the result of buildDependTree API.
This will be used by Toaster to map virtual dependencies to recipes.
(Bitbake rev: d3e07368549f30265f59846a260efa8230a225ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added optional parameter 'prefix' to filter out names that
don't start with specified prefix. Changed existing call
of get_providermap according to changed API.
Optimized the code: got rid of extra loop and temporary
list variable virts.
(Bitbake rev: df5a1392d6f91ccb44a99721c7d847da242121bb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its turning out that we really need a way to have bitbake just run
the setscene tasks but not any real tasks, particularly for SDK
operations.
Add an option for this since its pretty straight forward. This allows
various nasty workarounds in OE-Core to be removed.
(Bitbake rev: e4a2aafa1650a227a04d92a8a0b31efaed2c310e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default fc-cache will scan both system and user directories, which means it
attempts to scan $HOME/.fonts. As this is the build host's idea of $HOME this
generally doesn't exist, and causes fc-cache to exit with a failure.
Solve this by passing --system-only so that fc-cache will only scan system
directories, as is appropriate for a rootfs-time invocation.
(From OE-Core rev: 541315d6c56df6448f64c262f99d43d5c1e9400b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The currnet patches in OE-core doesn't have the "CVE:"
tag, now part of the policy of the patches.
This is patch add this tag to several patches. There might
be patches that I miss; the tag can be added in the future.
(From OE-Core rev: 065ebeb3e15311d0d45385e15bf557b1c95b1669)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* at least with git 2.6.3 I see git request-pull failing
when there is only :{BRANCH} as ending commit
* $ git request-pull origin/dizzy git://git.openembedded.org/openembedded-core-contrib jansa/dizzy-backports:jansa/dizzy-backports
The following changes since commit 7bb182bdd130266100fc541fd09b82d09c51cd80:
build-appliance-image: Update to dizzy head revision (2015-09-29 14:56:04 +0100)
...
And finds correct 7 changes there
* $ git request-pull origin/dizzy git://git.openembedded.org/openembedded-core-contrib :jansa/dizzy-backports
warn: No match for commit 6068d1c90336ddc1fb32856efd1d9ccf07733896 found at git://git.openembedded.org/openembedded-core-contrib
warn: Are you sure you pushed 'jansa/dizzy-backports' there?
The following changes since commit 97756472d3a69eaca95d105494ffea78c6b077e0:
build-appliance-image: Update to dizzy head revision (2014-10-18 16:16:27 +0200)
...
and lists all commits in _current_ branch since origin/dizzy, then it refuses
to continue, because there are too many changes.
* 6068d1c90336ddc1fb32856efd1d9ccf07733896 is this commit in jansa/master-submitted
branch so it really shouldn't be included in pull request from jansa/dizzy branch.
* git help says:
<end>
Commit to end at (defaults to HEAD). This names the commit at the tip of the history you are asking to be pulled.
When the repository named by <url> has the commit at a tip of a ref that is different from the ref you have locally, you can use
the <local>:<remote> syntax, to have its local name, a colon :, and its remote name.
* maybe the syntax got changes since git 2.1.0 when Saul added :${BRANCH}
* I haven't found how to respect ${COMMIT_ID in the new syntax
(From OE-Core rev: 2336d1e5de671f538f0cd493b75d29e1dfdb0caf)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not needed it any more since qt4 has been moved to meta-qt4.
(From OE-Core rev: dfb0832d7b2821ecb99fc543351a414933bc9d89)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Split runuser into its own package (previously provided by util-linux).
runuser is compiled only when DISTRO_FEATURES includes pam and also the
package is created only when runuser exists.
(From OE-Core rev: 35a86d15ed09d64cb999d35db13a2023bcaa51cc)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Valgrind has supported aarch64 since v3.10.0.
(From OE-Core rev: 04beae24db3cbea6d5ec8f2b181d312d625d7c37)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LICENSE checksums are changed due to a change in FSF address, or copyright
years update.
Added patches:
0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch replaces remove-ppc-tests-failing-build.patch
and removes only those tests that are known to break the build on ppc32 configurations tested by
poky autobuilders
Rebased patches:
sepbuildfix.patch rebased to 0004-Fix-out-of-tree-builds.patch
add-ptest.patch rebased to 0005-Modify-vg_test-wrapper-to-support-PTEST-formats.patch
Removed patches:
force-nostabs.patch removed because it's patching lines that have been removed upstream
remove-ppc-tests-failing-build.patch replaced with 0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch
enable.building.on.4.x.kernel.patch removed because the problem is fixed upstream
glibc.patch removed for the same reason
Removed backports:
pass-maltivec-only-if-it-supported.patch
0001-valgrind-Enable-rt_sigpending-syscall-on-ppc64-linux.patch
(From OE-Core rev: 9ce9c157a61442dc19fc5c6ef2737d2583fa6284)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Valgrind has been tested on armv5te/qemuarm, so it seems
that valgrind's configure check for armv7 is over cautious.
(From OE-Core rev: d68e47993277fa4fe18419b0b391bc53b1c4cdca)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rootfs with dpkg was failing due to false-positive in logcheck_error
because current logic of DpkgPM handles missing dependencies failure
using apt-get -f install [1][2].
This support was broken due to addition of logcheck and don't take into
account dpkgpm cases, in order to fix add an attr for specify expected
errors regex'es by package manager.
[1] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/lib/oe/rootfs.py#n659
[2] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/lib/oe/package_manager.py#n2038
(From OE-Core rev: fa7a5ebef87883755491b847c2f4e1a7b021d585)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This tells APT that it can use such packages to resolve dependencies
from packages of any architecture in a multilib build.
(From OE-Core rev: 7158c79a70e3d820c9701dacfa7206d13f95845a)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* tmp/deploy/deb subdirectories do not get hyphens replaced
with underscores, so don't do that translation when building
the sources list.
* Fix MULTILIB_VARIANTS handling to be more general and
work for all architectures
* Also include a fix for a warning generated by apt
due to missing apt/preferences.d directory.
(From OE-Core rev: c3ee9b12ae704eadf02ff288d8035b5885d6218e)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Have DPKG_ARCH set by directly invoking a mapping function, rather
than using an anonymous Python function modify the variable under
the hood, so we can have proper handling of overrides.
Also bring in some additional mappings to Debian architecture names
that weren't being handled.
(From OE-Core rev: 8d042ea4e755cb0bb28b88333e10e04ec4e86a36)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All of the connman-tools, connman-tests and connman-client
runtime depends connman.
(From OE-Core rev: bcb5a6866e9233bcb69a9ee06faed622280a6c22)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code in native.bbclass adds -native suffix to the package
names that don't have it. perl-native-runtime becomes
perl-native-runtime-native because of this.
Renamed perl-native-runtime -> hostperl-runtime-native to avoid
mangling it and to conform with the naming convetion for native
packages.
(From OE-Core rev: f4dade8e765a8c7bfd131728b9e0a34631e24950)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While starting dbus-daemon on a 32-bit linux host and it invokes
fstat to load /etc/dbus-1/system.conf through NFS. If system.conf
was created with a large indoe number on 64-bit host. The above
fstat invoking failed. Here is the log of strace:
............
$ ls -i /etc/dbus-1/system.conf
53778558109 /etc/dbus-1/system.conf
$ strace /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
|open("/etc/dbus-1/system.conf", O_RDONLY) = 4
|fstat64(4, {st_mode=S_IFREG|0644, st_size=3340, ...}) = 0
|close(4) = 0
|close(3) = 0
|write(2, "Failed to start message bus: Fai"..., 109Failed to start message bus:
Failed to stat "/etc/dbus-1/system.conf": Value too large for defined data type
|) = 109
|exit_group(1) = ?
|+++ exited with 1 +++
............
In this situation, we should support large-file for stat64. Add marco
AC_SYS_LARGEFILE to do the detection at configure time. It can be disabled
by configuring with the `--disable-largefile' option.
[YOCTO: #8863]
(From OE-Core rev: 33a7a9b3efafc35ed1409fdfa8ab8f544f1babc3)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a few ${S} and ${B} to make out of tree builds work, and stop using
autotools-brokensep. Annoyingly we still need to use a custom do_configure so
add a comment explaining why so someone else doesn't spend 30 minutes trying to
make it work.
Whilst here add a small patch so we don't need to tell the build where libtool
is, and remove class-native do_configure as it doesn't appear to be required
anymore.
At this point I started to get carried away.
The do_compile_prepend is redundant now that configure is being told what
compiler to use for build tools, so remove that.
Instead of using the integrated zlib fork, add a PACKAGECONFIG to use the zlib
we build and enable that by default. Also add a disabled PACKAGECONFIG for
bzip2 support.
(From OE-Core rev: 80b53d9366455f5e9f654fee53c685aa8fd365e7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
5.36 -> 5.37
Remove the backported patch:
core-profile-Fix-possible-crash-when-registering-pro.patch
Build bluez5 only when DISTRO_FEATURES include bluez5
(From OE-Core rev: 0a556af62b509f9defd8ac5b3a6648bdfe1dff67)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when DEBUG_BUILD = "1":
test-backface-culling.c:206:7: error: 'cull_front' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| validate_part (framebuffer,
| ^
| cc1: some warnings being treated as errors
(From OE-Core rev: 48b0bc85502e394f13898bbec61e21f9282b0edf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use $HOME instead of /home/root in case user changes the default root
directory by ROOT_HOME
(From OE-Core rev: 123ca1c3457e472bd3dab5563f7ba5312a9864bf)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use $HOME instead of /home/root in case user changes the default root
directory by ROOT_HOME
(From OE-Core rev: c9adb8399687b60eb976ab32d960f4b32af71fea)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Due to the version update to 1.59.0, the two patches previously
backported in this recipe are now dropped. The actual status of
the arm-intrinsics.patch (reported with Upstream-Status: Backport)
is unknown to the committer, and hence, that patch is kept in the
recipe, even if it is possibly not required anymore. A deeper
analysis is required to determine need and status of that patch.
Second, boost 1.59.0 provides a new library, called timer,
which is packaged as further library in the boost recipe. The
update to boost 1.60.0 required no further changes beyond
changing the checksum hashes.
Third, on PPC architectures, qemuppc & mpc8315e-rdb [1] (tested
by Ross Burton), the boost test library with the vanilla
version 1.60.0 fails with:
| gcc.compile.c++ bin.v2/libs/test/build/aca09349fdb84d131321425f6c3a38ed/execution_monitor.o
| In file included from [...]/tmp/sysroots/mpc8315e-rdb/usr/include/fenv.h:114:0,
| from [...]/tmp/sysroots/mpc8315e-rdb/usr/include/c++/5.3.0/fenv.h:36,
| from ./boost/detail/fenv.hpp:97,
| from ./boost/test/execution_monitor.hpp:64,
| from ./boost/test/impl/execution_monitor.ipp:31,
| from libs/test/src/execution_monitor.cpp:16:
| ./boost/test/impl/execution_monitor.ipp: In function 'unsigned int boost::fpe::enable(unsigned int)':
| ./boost/test/impl/execution_monitor.ipp:1383:7: error: expected id-expression before '(' token
| ::feclearexcept(BOOST_FPE_ALL);
| ^
| ./boost/test/impl/execution_monitor.ipp: In function 'unsigned int boost::fpe::disable(unsigned int)':
| ./boost/test/impl/execution_monitor.ipp:1420:7: error: expected id-expression before '(' token
| ::feclearexcept(BOOST_FPE_ALL);
| ^
The commit f50e7bc9fed323c5705c0ed992c03e80eeec1dd6 from the
boostorg/test github repository (branch: develop) [2] addresses
that issue, but it was not merged in the 1.60.0 release. This
commit adds this upstream-accepted patch, which was created by:
`git checkout f50e7bc9fed323c5705c0ed992c03e80eeec1dd6 && git format-patch -1`
[1] http://lists.openembedded.org/pipermail/openembedded-core/2016-January/114844.html
[2] https://github.com/boostorg/test/commit/f50e7bc9fed323c5705c0ed992c03e80eeec1dd6
(From OE-Core rev: 17d77db5e1203e18cdd178e7d9a457310425ebdc)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove 'stamp-base' from this file as this flag is no longer used.
[YOCTO #8468]
(From OE-Core rev: be6070e54f8fe3b530dce66623287403a50ac8a1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gcc 5.3 does not build on NIOS2 due to a missing MUSL_DYNAMIC_LINKER
definition in it's config file. Add the definition to fix the build issue.
The output produced during the failing build is as follows:
g++ -isystem/b/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -Woverloaded-virtual -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -L/b/tmp/sysroots/x86_64-linux/usr/lib -L/b/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/b/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/b/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/b/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/b/tmp/sysroots/x86_64-linux/lib -Wl,-O1 gcc-ar.o -o gcc-ar \
file-find.o libcommon.a ../libcpp/libcpp.a ../libbacktrace/.libs/libbacktrace.a ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a
In file included from ./tm.h:27:0,
from /b/tmp/work-shared/gcc-5.3.0-r0/gcc-5.3.0/gcc/gcc.c:34:
./config/linux.h:92:28: error: expected ',' or ';' before 'MUSL_DYNAMIC_LINKER'
BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
^
./config/linux.h:59:60: note: in definition of macro 'CHOOSE_DYNAMIC_LINKER1'
"%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}"
^
./config/linux.h:91:3: note: in expansion of macro 'CHOOSE_DYNAMIC_LINKER'
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, \
^
./config/nios2/linux.h:40:25: note: in expansion of macro 'GNU_USER_DYNAMIC_LINKER'
-dynamic-linker " GNU_USER_DYNAMIC_LINKER "} \
^
/b/tmp/work-shared/gcc-5.3.0-r0/gcc-5.3.0/gcc/gcc.c:884:32: note: in expansion of macro 'LINK_SPEC'
static const char *link_spec = LINK_SPEC;
^
<command-line>:0:27: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
/b/tmp/work-shared/gcc-5.3.0-r0/gcc-5.3.0/gcc/gcc.c:1295:48: note: in expansion of macro 'STANDARD_STARTFILE_PREFIX'
static char *const standard_startfile_prefix = STANDARD_STARTFILE_PREFIX;
(From OE-Core rev: c8ec931b07c08e27027b38313e6776875db12acb)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some unfreed rpmmi pointers in printDepList()
function; this happens when the package have null as
the requirement.
This patch fixes these unfreed pointers and add small
changes to keep consistency with some variables.
[YOCTO #8028]
(From OE-Core rev: da7aa183f94adc1d0fff5bb81e827c584f9938ec)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add INSTALL_TIMEZONE_FILE config variable to enable/disable installation
of ${sysconfdir}/timezone (/etc/timezone) by tzdata packages. Defaults
to "1" to maintain previous behavior.
Most libc implementations can be configured to retrieve system's
defaults timezone from /etc/localtime, and don't need a second file
(/etc/timezone) to express this configuration. Maintaining this file is
an unnecessary burden on sysadmins unless there's software using
/etc/timezone directly (I.e. outside of libc). Some distributions may
choose not to provide it.
Testing: Built tzdata under default config and verified CONFFILES_tzdata
still has both /etc/timezone and /etc/localtime and both are in the
image. Built with INSTALL_TIMEZONE_FILE = "0" and verified /etc/timezone
is removed from CONFFILES_tzdata and the image. Successfully installed
package to an x64 target.
(From OE-Core rev: 5c535bf45fc324e31b42364c99d6fffa00167995)
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Reviewed-by: Brad Mouring <brad.mouring@ni.com>
Reviewed-by: Rich Tollerton <rich.tollerton@ni.com>
Reviewed-by: Ken Sharp <ken.sharp@ni.com>
Reviewed-by: Ross Burton <ross.burton@intel.com>
Natinst-ReviewBoard-ID: 121628
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On sysvinit systems, volatiles is configured to make /etc/resolv.conf symlink
to a file in a volatile path, which lets us write to /etc/resolv.conf for
read-only-rootfs. For systemd, this isn't set up unless we enable
systemd-resolved, which we don't by default. When it's not enabled, create the
/etc/resolv.conf symlink and ensure the volatile path is created on boot with
tmpfiles.d.
(From OE-Core rev: 7f087f161e8942bcd35f88999dfca418f01cd7fa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need nss-myhostname on systemd systems, because systemd already
provides myhostname, but we weren't configuring nsswitch to use it. Being able
to resolve the hostname is useful for a number of different applications, so
enable it using the same postinst/prerm bits which are in nss-myhostname.
(From OE-Core rev: 1fb3e1a4bbf36a5b46d126a478d42d0b94f43182)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This lets someone use a different update-alternatives-native provider. Without
this available, they'll step on one another in the sysroot unconditionally,
since we need to build opkg-utils-native for ipk based builds regardless.
(From OE-Core rev: 0afb74e23ee9a1fcdd334865a5f7280526785a4c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This works around a limitation of the chkconfig update-alternatives, so it
works with all our update-alternatives providers.
(From OE-Core rev: f78c640f1f41eb12ef7919e7dc99aae7db6f6b17)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop upstreamed patches
Seems to fix parallel build race with locales
(From OE-Core rev: 1eb9ce1277dfaaa32d9d528f21c96deedf8f122f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
prune_lockedsigs expects excluded_targets to be a list, whereas
previously it was passed in as a string.
(From OE-Core rev: db3cd1e08b08b99342d269882f31ec7e1daba2c6)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Right now, the locked task hashes list for the extensible SDK locks
down only the sstate tasks.
Whilst asthetically pleasing, this gives two problems:
* Half the task are left floating meaning checksum mismatches
are a pain to debug
* The later code which copies relavent data files out the sstate
cache can't use any of this data.
This patch modifies things so all the checksums are listed in the locked
file. An exclusion of tasks probably makes more sense for the library
function rather than an allowed list.
The only sstate task being deliberaly excluded here was do_package
so add in a function to explictly exclude those sstate object files.
The net result of this that siginfo files for all tasks are included in
the SDK, which means commands like "bitbake -S printdiff" now function.
(From OE-Core rev: 6b70479e47b8a8743d8b410d6bc08da1607a318e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Dengke Du
Saul Wold
Richard Purdie
Ross Burton
Kristian Amlie
Chen Qi
Yi Zhao
Michael Wood
Ed Bartosh
Mariano Lopez
Martin Jansa
Robert Yang
Ioan-Adrian Ratiu
Andre McCurdy
Alexander Kanavin
Aníbal Limón
Matt Madison
Hongxu Jia
Maxin B. John
Lukas Bulwahn
Marek Vasut
Haris Okanovic
Christopher Larson
Khem Raj
Randy Witt