aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-08-27systemd: Support building on uclibcKhem Raj
include missing.h to get MAX_HANDLE_SZ which is not defined in uclibc. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27uclibc: Support systemd buildsKhem Raj
Systemd needs some extra defines e.g. ADJ_NANO and IPTOS_CLASS_CS6 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27uclibc: Upgrade to tip of masterKhem Raj
Adjust mips to cater for new mips32r2 defaulttune Remove upstreamed patches Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27openssl: Re-add linux-uclibc tupleKhem Raj
With last restructuring for musl, some of uclibc targets got ignored fsl/ppc and ARM worked ok since they use special target triplets which were already considered but other like mips, x86 and so on failed Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27IBM power7 v2: Add new tune file for PPC power7Armin Kuster
v2: rename file Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27IBM power6 v2: Add new tune file for PPC power6Armin Kuster
v2: rename file Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27IBM Power5 v2: Add new tune file for PPC power5 cpuArmin Kuster
V2: rename file Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27nss: CVE-2014-1544Li Wang
the patch comes from: https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2014-1544 https://hg.mozilla.org/projects/nss/rev/204f22c527f8 author Robert Relyea <rrelyea@redhat.com> https://bugzilla.mozilla.org/show_bug.cgi?id=963150 Bug 963150: Add nssCertificate_AddRef and nssCertificate_Destroy calls to PK11_ImportCert to prevent nssTrustDomain_AddCertsToCache from freeing the CERTCertificate associated with the NSSCertificate. r=wtc. Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27logrotate: add packageconfigsFahad Usman
add packageconfigs for acl and selinux. Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27logrotate: obey our flagsFahad Usman
Needed to quiet GNU_HASH warnings, and some minor fixes. Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27oeqa/sdk/buildsudoku.py: add setUpModule method to run only when gtk+ in ↵Corneliu Stoicescu
installed. Adding setUpModule in order to skip the module when gtk+ is not installed in the toolchain. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27oeqa/oetest.py: enable sdk tests to use hasFeature and hasPackage methods.Corneliu Stoicescu
In order to use the hasFeature and hasPackage methods, we need to make oeSDKTest extend oeTest and also set the test context (tc) attribute in the oeTest class when loading the tests. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27classes/testimage.bbclass: add more fields to the sdk TestContextCorneliu Stoicescu
In order to use hasFeature and hasPackage methods in sdk test modules, we need specific fields to be set in the TestContext object. Adding pkgmanifest, imagefeatures and distrofeatures to the TestContext. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27classes/populate_sdk_base.bbclass: add a manifest for target sdkCorneliu Stoicescu
Similar to the way BSP images have rootfs a manifest, the toolchain now also has a manifest file created alongside the sdk image. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27qemux86-64: support X11 when QEMU is emulating a different GPU than vmwareMax Eliaser
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware, and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86-64 image, the image can be made to launch an X server on when cirrus and std are chosen, in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL disabled, meaning a driver for it is unnecessary.) The runqemu script now allows the choice of emulated VGA adapter to be specified manually, so it's important that qemux86-64 supports any configuration the user might choose without requiring the image to be rebuilt. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27qemux86-64: xorg.conf: allow X.Org driver to be selected automatically.Max Eliaser
A section specifying the driver to use is deleted from the image's xorg.conf, allowing the X server to automatically select the most appropriate driver. Testing shows that it does always pick the correct one. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27qemux86: support X11 when QEMU is emulating a different GPU than vmwareMax Eliaser
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware, and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86 image, the image can be made to launch an X server on when cirrus and std are chosen, in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL disabled, meaning a driver for it is unnecessary.) The runqemu script now allows the choice of emulated VGA adapter to be specified manually, so it's important that qemux86 supports any configuration the user might choose without requiring the image to be rebuilt. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27qemux86: xorg.conf: allow X.Org driver to be selected automatically.Max Eliaser
A section specifying the driver to use is deleted from the image's xorg.conf, allowing the X server to automatically select the most appropriate driver. Testing shows that it does always pick the correct one. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27xorg-drivers: xf86-video-cirrus: add a recipe for the Cirrus Logic X.Org driverMax Eliaser
This driver allows X.Org to use the Cirrus Logic family of VGA adapters. Since QEMU can emulate a Cirrus VGA adapter, this driver will be of use for images that are expected to run under QEMU, if QEMU's other VGA adapters are unavailable. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27archiver.bbclass: add revision to git tarfile nameJoe Slater
When archiving original source, insert the first 10 characters of srcrev, after stripping off any AUTOINC+, into the filename for tarfiles created from directories. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27hicolor-icon-theme: Upgrade to 0.13Roxana Ciobanu
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27xkeyboard-config: upgrade to 2.12Roxana Ciobanu
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27xf86-input-mouse: upgrade to 1.9.1Roxana Ciobanu
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27xf86-input-synaptics: upgrade to 1.8.0Ciobanu Roxana
The two main changes in this release: - the eventcomm backend uses libevdev, we recommend libevdev 1.2 or newer - support for a secondary software button area for the Lenovo *40 series (T440, T540, X240, Helix, Yoga, ...). Signed-off-by: Ciobanu Roxana <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27psmisc: Update patch statusPaul Barker
The patch "Include <limits.h> for PATH_MAX" was accepted into the master branch of psmisc by the maintainer. It should be included in the next release. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27native/nativesdk: Clear MACHINEOVERRIDESKhem Raj
In cases where we override variables e.g PACKAGE_ARCH conditionally and use a MACHINEOVERRIDE to qualify the override like PACKAGE_ARCH_<MACHINE> = "some target PACKAGE_ARCH" This would also be effective if this recipe is BBEXTENDED to native or nativesdk which is undesired This particular issue will cause wrong sysroot to be used for nativesdk case since PACKAGE_ARCH would have been modified and eventually changing value of STAGING_DIR_TARGET which we use as --sysroot option to cross and cross-canadian built SDK gcc Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27sanity: refactor mirrors checks to be more pythonicChristopher Larson
- Use clearer variable names - Use variable unpacking to reference elements by name rather than index - Sacrifice a small amount of time (iterate over protocols twice per entry rather than once) for clarity: use readable generator expressions with any() rather than maintaining state. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27sanity: fix support for regex schemes in mirrors checkChristopher Larson
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27sanity: handle both \n and \\n in mirror varsChristopher Larson
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-25autogen-native: inherit pkgconfig to fix a build failureShrikant Bobade
This patch is to inherit pkgconfig to fix a build failure. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-25libxml2: Explicitly enable zlib supportOtavio Salvador
The zlib support is a must if you are using RPM backend. So this explicitly enable it and adds a comment in the recipe to avoid its removal by mistake. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-25buildhistory: Restore parsing time optimalizationMartin Jansa
* it was added in: http://git.openembedded.org/openembedded-core/commit/meta/classes/buildhistory.bbclass?id=540a2a30be21c3eca4323efbe91e7dcfc31a4c97 * then accidentally removed in: http://git.openembedded.org/openembedded-core/commit/meta/classes/buildhistory.bbclass?id=6db6c74f2876df7a183990426bb4262972966441 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-25bitbake.conf: Drop unused MKTEMP* variablesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23package: Disable runtime mapping of RPROVIDES/RCONFLICTS/RREPLACESRichard Purdie
It doesn't really make sense to run the remapping code on these variables. If specific renaming is needed, it should be applied manually. This means that the debian RPROVIDES of the original package name can be preserved. There was also a bug report about this on the OE-Core mailing list recently where someone else ran into this problem too. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23package: Don't remap names in packagegroup recipesRichard Purdie
For package groups, use the original package names and don't use the remapped (e.g. debian) naming. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23debian: Set RPROVIDES to include the original packagename when renamingRichard Purdie
Currently its hard for a packagegroup recipe to depend on something who's name can change unpredictably. We therefore add in RPROVIDES for the original package name so that these are also available to use as dependencies. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23sstatesig: Only squash dependencies for allarch packagegroupsRichard Purdie
The idea of squashing packagegroup dependencies was to avoid allarch packages rebuilding upon tune/arch changes. Now that the allarch class inclusion is conditional, we can narrow down the packagegroup squashing to be specifically applied to allarch recipes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23packagegroup: Move inherit packagegroup to after PACKAGE_ARCHRichard Purdie
This means these classes now avoid the allarch inherit entirely. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23allarch: Add warning about packagegroupRichard Purdie
Since we want to start including this class conditionally, detect cases where packagegroup files use the old ordering and inform the user they need to update this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23packagegroup: Make allarch inherit conditionalRichard Purdie
Make the allarch inherit conditional on PACKAGE_ARCH being left as all. The one downside to this approach is that recipes need to set PACKAGE_ARCH *before* inheriting the class in order to avoid the inherit. The advantage is that we could start to detect the use of the allarch inherit in the sstatesig code for improved task checksums. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23guile: workaround ice ssa corruption while DEBUG_BUILDHongxu Jia
Add: MACHINE = "qemux86-64" DEBUG_BUILD = "1" to local.conf and there was a ssa corruption to build guile: .. Unable to coalesce ssa_names 48 and 3476 which are marked as MUST COALESCE. sp_48(ab) and sp_3476(ab) guile-2.0.11/libguile/vm-engine.c: In function 'vm_debug_engine': guile-2.0.11/libguile/vm.c:673:19: internal compiler error: SSA corruption #define VM_NAME vm_debug_engine ^ guile-2.0.11/libguile/vm-engine.c:39:1: note: in expansion of macro 'VM_NAME' VM_NAME (SCM vm, SCM program, SCM *argv, int nargs) ^ Please submit a full bug report, with preprocessed source if appropriate. See <http://gcc.gnu.org/bugs.html> for instructions. ... Tweak libguile/vm-i-system.c to check the value of nshuf to workaround it. The tweak didn't change previous logic. [YOCTO #6411] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23puzzles: fix do_compile failed when DEBUG_BUILDHongxu Jia
There were compiling failure with option -g -O ... ././gtk.c: In function 'configure_area': ././gtk.c:397:2: error: 'cr' may be used uninitialized in this function [-Werror=maybe-uninitialized] cairo_set_source_rgb(cr, ^ ././gtk.c:384:14: note: 'cr' was declared here cairo_t *cr; ^ ././gtk.c: In function 'main': ././gtk.c:2911:6: error: 'error' may be used uninitialized in this function [-Werror=maybe-uninitialized] fprintf(stderr, "%s: %s\n", pname, error); ^ cc1: all warnings being treated as errors ... Initialized the pointers 'cr' and 'error' with NULL [YOCTO #6410] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23fixupRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23busybox : fix do_compile failed on qemumips when DEBUG_BUILD (ICE)Hongxu Jia
Build busybox on mips with -g -O, there is a ice failure: ... shell/ash.c:8758:1: internal compiler error: in dwarf2out_var_location, at dwarf2out.c:21264 ... Please submit a full bug report, with preprocessed source if appropriate. See <http://gcc.gnu.org/bugs.html> for instructions. {standard input}: Assembler messages: {standard input}: Warning: missing .end at end of assembly {standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive ... The following line caused the ice failure on mips: ... void evaltreenr(union node *, int) __attribute__ ((alias("evaltree"),__noreturn__)); ... So remove evaltreenr which was a alias of evaltree, and use evaltree to instead. [YOCTO #6625] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23opkg: Add runtime dep on gnupg if 'gpg' is in PACAKGECONFIGPaul Barker
The 'opkg-key' utility requires gpg to manage the list of trusted keys. The ability to verify package signatures is not much use without the ability to add keys to the trusted list... Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23gpgme: Add pkg-config filePaul Barker
A basic gpgme.pc file is installed with gpgme which should allow the library to be found and used using pkg-config rather than gpgme-config. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23bind: refer ubuntu/redhat to add bind user/groupHongxu Jia
We refer what ubuntu/redhat did, gave bind a user/group Here is the example in ubuntu 14.04: $ ps -eo user,group,cmd | grep "named" ... bind bind /usr/sbin/named -u bind ... $vim bind9_1%3a9.9.5.dfsg-3_amd64.deb/postinst ... # lets give them a bind user/group in all cases. getent group bind >/dev/null 2>&1 || addgroup --system bind getent passwd bind >/dev/null 2>&1 || adduser --system --home /var/cache/bind --no-create-home \ --disabled-password --ingroup bind bind ... Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23ptest-runner: return 1 instead of zero if any test failsLaszlo Papp
It is better to know this information from the exit code rather than parsing test specific outputs. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23udev-cache: parametrize sysconf file pathsRichard Tollerton
The udev-cache facility uses files that represent system states, to ensure that the cache tarball is valid to apply. These paths were hardcoded in several places; collect them into SYSCONF_CACHED and SYSCONF_TMP. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23udev-cache: Don't ignore error messages from cache extractRichard Tollerton
Previous changes should obviate all known spurious errors coming out of tar. Since real extraction failures can and will occur, stop redirecting stdout/stderr to /dev/null. Take this opportunity to also remove an unnecessary subshell. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-19 00:27:40 +0000