aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-03-12scripts/oe-selftest: Add search expression matching to run/list optionsHumberto Ibarra
The oe-selftest script required an exact matching for the parameters passed to its run-tests-by and list-tests-by options. Many tests can be retrieved here and filtering is a must. This patch add this filtering functionality by enabling the use of wildcards such as "*". [Yocto #8916] Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12glib-2.0: relocate the GIO module directory for native buildsRoss Burton
Glib hard-codes the install path in search path for GIO modules, which causes problems when glib-2.0-native is restored from sstate with a different build directory. In the future we should relocate symbols directly using the same system that the eSDK uses, but for now use dladdr() to look up where the library was loaded from to build the search path. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12image-buildinfo.bbclass: fix performance problemsPatrick Ohly
Inheriting image-buildinfo.bbclass primarily slowed down image building for two reasons: 1. The content of the shell command "buildinfo" gets expanded multiple times, each time again checking the state of all layers. 2. When expanded as part of the actual image creation, git is invoked under pseudo, which makes the check quite a bit slower (from a few seconds to a minute with many layers). To fix this, buildinfo now is a Python method which calls the checks only when really executed. Pseudo is told to unload itself when starting git. In addition, "git diff" is invoked with "--quiet", which avoids producing output that is just getting thrown away. As before, any kind of problem or output causes the layer to be marked as "modified". [Revision 2 of the change with some dead code removed] Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12linux-yocto/4.4: gpio-pca953x: add "drive" propertyBruce Ashfield
Integrating the following commit for the 4.4 kernel: [ gpio-pca953x: add "drive" property Galileo gen 2 has support for setting GPIO modes. Expose these properties through the GPIO sysfs interface. This approach is bit hacky, since it changes the interface semantics. The original patch was by Josef Ahmad <josef.ahmad@linux.intel.com> and made on top of kernel 3.8. ] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python3: fix do_configure check platform triplet errorHongxu Jia
For p1022ds bsp, the MULTIARCH is powerpc-linux-gnuspev1 and python3 did not recognize the extra 'v1' which caused python3 configure error for the platform triplet. Q:Why Python3 check platform triplet? A:Under Linux, GNU/KFreeBSD and the Hurd, C extensions now include the architecture triplet in the extension name, to make it easy to test builds for different ABIs in the same working tree. vim config.log ... EXT_SUFFIX='.cpython-35m-powerpc-linux-gnuspe.so' ... Here is the generated C extensions which take platform triplet into account. ... |image/usr/lib/python3.5/lib-dynload/_datetime.cpython-35m-powerpc-linux-gnuspe.so ... https://bugs.python.org/issue22980 https://www.python.org/dev/peps/pep-3149/ https://bugs.python.org/review/22980/patch/14593/54808 [YOCTO #9226] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12ncurses_6: Fix an install race conditionJuro Bystricky
Both targets install.libs and install.includes install the same files, resulting in a race condition when running parallel make. This race is addressed in a patch file, making sure only one of the targets (install.includes) installes the include files. This will work properly (i.e.ncurses will install as intended by the recipe) as long as we always install both targets. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12build-appliance: make the inclusion of downloaded sources optionalJoshua Lock
Including the entirety of DL_DIR in the generated build appliance image adds a significant amount of space and makes the build appliance image more awkward to distribute. Add a configuration option to make the inclusion of sources option and default to disabling this functionality. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12builder: remove hob from autostartJoshua Lock
hob has been removed so don't try and autostart it with the mini-x session in the build appliance. Remove the please_wait_dialog program which informed the user to wait for Hob to start. Rename the mini-x autostart file to reflect the removal of hob, we now just start a matchbox-terminal with the environment configured. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12Revert "gstreamer1.0-plugins-XXX: move inherit gettext into common .inc file"Peter Kjellerstedt
Do not assume that the recipes in OE-Core are the only ones using gstreamer1.0-plugins.inc or that all GStreamer plugins support localization. Without this reversal, all our GStreamer plugin recipes started spewing out: configure: WARNING: unrecognized options: --disable-nls This reverts commit 282fa5ff059db6f6daa108d5ec4ea3d0bfbe0fe2. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12musl: disable building of gobject introspection dataAlexander Kanavin
When musl is in use, GLib binaries crash on assertion failures under qemu Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12machine/include/arch-x86: Make x32 ABI not supporting gobject-introspection-dataRichard Purdie
x32 isn't supported by user mode qemu so we can't build gobject-introspection-data, so disable it in this case. (From OE-Core rev: 4ee1eb8ddd3fbe144fbaeb32e07b66e191aa7548) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12bitbake.conf: add 'gobject-introspection-data' to ↵Alexander Kanavin
DISTRO/MACHINE_FEATURES_BACKFILL This means that introspection data will be generated using qemu by default. If this causes trouble (qemu does not always emulate target architectures perfectly), then add MACHINE_FEATURES_BACKFILL_CONSIDERED = "gobject-introspection-data" to machine configuration or DISTRO_FEATURES_BACKFILL_CONSIDERED = "gobject-introspection-data" to distro configuration. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12packagegroup-core-x11-sato: add python-pygobject and gtk+3Alexander Kanavin
This allows easy testing of introspection for example using http://python-gtk-3-tutorial.readthedocs.org/en/latest/introduction.html Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12webkitgtk: enable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12recipes-gnome: fix introspection supportAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python-pygobject: update to 3.18.2Alexander Kanavin
The new version of pygobject relies in gobject introspection; this has prevented the update previously. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gnomebase.bbclass: do not disable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gstreamer: enable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12libsoup-2.4: enable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12clutter: enable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk+3: enable gobject-introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk+: enable gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12avahi: enable gobject-introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12python-pygtk: remove the recipeAlexander Kanavin
python-pygtk hasn't been updated in several years, is incompatible with the current version of pygobject, and is generally obsolete as all modern python gtk apps use introspection directly. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12avahi-ui: remove the dependency on python-pygtk by disabling avahi-discoverAlexander Kanavin
python-pygtk is removed in a separate commit; the reasons for that are explained in that commit's message. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12vala.bbclass: remove pre-packaged vapigen.m4 from tarballsAlexander Kanavin
We need to make sure that our fixed vapigen.m4 is used instead. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12vala: enable the use of vapigen by packages with vala supportAlexander Kanavin
Now that gobject-introspection is supported, generation of .vapi files for develeloping Vala code against gobject-based libraries should be supported as well. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection.bbclass: add a class that enables gobject introspectionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gtk-doc-stub: remove introspection stubsAlexander Kanavin
As we provide the full introspection support, we need to remove the stubs from this package that conflict with it. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection: Override GIO_MODULE_DIR when scanningRichard Purdie
This is to stop GLib linking to GConf and other modules (e.g gnutls). If for example gconf is installed in the sysroot then GLib will use it by default for the GSettings backend. This will pull a lot more libraries into the scanner processes and expands the potential for runtime issues since dependencies may be missing of change since they're not in the dependency chain. Use an invalid modules directory so we avoid loading any modules or the libraries they link against which the system may be in the process of rebuilding. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-12gobject-introspection: add the recipeAlexander Kanavin
The recipe has comments that explain what is going on and why. Also, there are patches necessary to make it work in Yocto cross-compilation environment; they will be submitted upstream. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11meta: toolchain-shar-relocate.sh: Fix for extracting SDK in the same ↵Zawadzki, Krzysztof (Nokia - PL/Wroclaw)
directory as SDK script. If SDK will be extracted in the same folder as sdk shar script. The shar_relocate will substitute SDK.sh script SDKPATH with extract destination path. After that operation no one will be able use this sdk script as paths in it will be different. To fix this we need to filter out sdk script and relocate_sdk scripts from SDKPATH substitution Signed-off-by: Krzysztof Zawadzki <krzysztof.zawadzki@nokia.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11nettle: The variable named p in the patch file was incorrectly named.ngutzmann
The variable in question should have been called ecc->p. The patch has been updated so that the compilation of the nettle recipe would complete successfully. The backport originated from this commit https://git.lysator.liu.se/nettle/nettle/commit/c71d2c9d20eeebb985e3872e4550137209e3ce4d Signed-off-by: ngutzmann <nathangutzmann@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11valgrind: Make dep on glibc-utils conditional on TCLIBC = glibcKhem Raj
This helps with building valgrind for non-glibc systems Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11make 4.1: fix segfault when ttyname failsChang Rebecca Swee Fun
GNU make segfaults when run in a chroot environment because of a known bug in GNU make 4.1. See [1] for details. Works if /dev/pts is mounted before chroot. [1] http://savannah.gnu.org/bugs/?43434 [YOCTO #9067] Reported-by: Alexander Larsson <alexl@redhat.com> Signed-off-by: Anuj Mittal <anujx.mittal@intel.com> Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11gcc: Disable libitm for MicroBlazeNathan Rossi
Disable libitm as it is not supported on MicroBlaze. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11sign_package_feed: add feed signature typeIoan-Adrian Ratiu
Signing package feeds will default to ascii armored signatures (ASC) the other option being binary (BIN). This is for both rpm and ipk backends. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11package_manager: sign IPK package feedsIoan-Adrian Ratiu
Create gpg signed ipk package feeds using the gpg backend if configured Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11signing-keys: create ipk packageIoan-Adrian Ratiu
Store the ascii armored pubkey generated using gpg_sign.export_pubkey() in its own package. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11gpg_sign: export_pubkey: add signature type supportIoan-Adrian Ratiu
Add support for multiple types of signatures (binary or ascii) in export_pubkey(). There is no change in behaviour for the function, the previous implicit default is the new parameter "armor" default. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11gpg_sign: detach_sign: fix gpg > 2.1 STDIN file descriptorIoan-Adrian Ratiu
Starting from v2.1 passing passwords directly to gpg does not work anymore [1], instead a loopback interface must be used otherwise gpg >2.1 will error out with: "gpg: signing failed: Inappropriate ioctl for device" gpg <2.1 does not work with the new --pinentry-mode arg and gives an invalid option error, so we detect what is the running version of gpg and pass it accordingly. [1] https://wiki.archlinux.org/index.php/GnuPG#Unattended_passphrase Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11gpg_sign: add local ipk package signing functionalityIoan-Adrian Ratiu
Implement ipk signing inside the sign_ipk bbclass using the gpg_sign module and configure signing similar to how rpm does it. sign_ipk uses gpg_sign's detach_sign because its functionality is identical to package feed signing. IPK signing process is a bit different from rpm: - Signatures are stored outside ipk files; opkg connects to a feed server and downloads them to verify a package. - Signatures are of two types (both supported by opkg): binary or ascii armoured. By default we sign using ascii armoured. - Public keys are stored on targets to verify ipks using the opkg-keyrings recipe. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11systemd: add comment stating that resolved needs gcryptRoss Burton
The resolved support requires that gcrypt is enabled. PACKAGECONFIG doesn't support dependencies, so add a comment. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11selftest/bblayers.py: Remove harcoded recipe filesMariano Lopez
Currently the recipe files are hardcoded and if the recipe change the version, the test will fail. This will change from using a harcoded file to look for the file using bitbake-layers. Now, just the recipe name must be specified. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11selftest/prservice.py: Sanitize package version when looking for stampMariano Lopez
Currently when using a git version the check for the stamp, using regex, will fail because of plus sign in the version. With this change the version is escaped before adding it to the regex. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11lsof: update UPSTREAM_CHECK_URIMaxin B. John
Set UPSTREAM_CHECK_URI to the below listed URL: http://www.mirrorservice.org/sites/lsof.itap.purdue.edu/pub/tools/unix/lsof Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11eudev: provide UPSTREAM_CHECK_URIMaxin B. John
Provide UPSTREAM_CHECK_URI to perform checkpkg task. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11toaster.bbclass: show packages that were setscened into existence toobrian avery
We were previously ignoring pkgs that came in from a setscene like from an sstate mirror). With this patch we can use pkgs than come from sstate for image customisation as well. Also remove unused variable. [YOCTO #9137] Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11gcc: Fix the license on GNU OpenMPHelio Chissini de Castro
Poky jethro has libgomp ( GNU OpenMP ) license marked as GPL-3.0, where's in fact the correct is GPL-3.0 with GCC Library Runtime Exception Signed-off-by: Helio Chissini de Castro <helio.castro@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-11linux-yocto/4.4: Galileo updatesBruce Ashfield
Integrating the following patches for improved galileo support: 66009f8977a6 adc1x8s102: support ACPI-based enumeration. 903003b78c13 staging:iio: add support for ADC1x8s102. cd83f4095b23 spi-pxa2xx: fixed ACPI-based enumeration of SPI devices. c4efe23b7f93 pca9685: PCA9685 PWM and GPIO multi-function device. 81e166ec0a35 gpio: pca953x: provide GPIO base based on _UID 4086f8c34956 acpi: added a custom DSDT file. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-28 04:07:11 +0000