diff options
Diffstat (limited to 'handbook/extendpoky.xml')
-rw-r--r-- | handbook/extendpoky.xml | 726 |
1 files changed, 726 insertions, 0 deletions
diff --git a/handbook/extendpoky.xml b/handbook/extendpoky.xml new file mode 100644 index 0000000000..18a7b66647 --- /dev/null +++ b/handbook/extendpoky.xml @@ -0,0 +1,726 @@ +<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> + +<chapter id='extendpoky'> + +<title>Extending Poky</title> + + <para> + This section gives information about how to extend the functionality + already present in Poky, documenting standard tasks such as adding new + software packages, extending or customising images or porting poky to + new hardware (adding a new machine). It also contains advice about how + to manage the process of making changes to Poky to achieve best results. + </para> + + <section id='usingpoky-extend-addpkg'> + <title>Adding a Package</title> + + <para> + To add package into Poky you need to write a recipe for it. + Writing a recipe means creating a .bb file which sets various + variables. The variables + useful for recipes are detailed in the <link linkend='ref-varlocality-recipe-required'> + recipe reference</link> section along with more detailed information + about issues such as recipe naming. + </para> + + <para> + The simplest way to add a new package is to base it on a similar + pre-existing recipe. There are some examples below of how to add + standard types of packages: + </para> + + <section id='usingpoky-extend-addpkg-singlec'> + <title>Single .c File Package (Hello World!)</title> + + <para> + To build an application from a single file stored locally requires a + recipe which has the file listed in the <glossterm><link + linkend='var-SRC_URI'>SRC_URI</link></glossterm> variable. In addition + the <function>do_compile</function> and <function>do_install</function> + tasks need to be manually written. The <glossterm><link linkend='var-S'> + S</link></glossterm> variable defines the directory containing the source + code which in this case is set equal to <glossterm><link linkend='var-WORKDIR'> + WORKDIR</link></glossterm>, the directory BitBake uses for the build. + </para> + <programlisting> +DESCRIPTION = "Simple helloworld application" +SECTION = "examples" +LICENSE = "MIT" + +SRC_URI = "file://helloworld.c" + +S = "${WORKDIR}" + +do_compile() { + ${CC} helloworld.c -o helloworld +} + +do_install() { + install -d ${D}${bindir} + install -m 0755 helloworld ${D}${bindir} +} + </programlisting> + + <para> + As a result of the build process "helloworld" and "helloworld-dbg" + packages will be built. + </para> + </section> + + <section id='usingpoky-extend-addpkg-autotools'> + <title>Autotooled Package</title> + + <para> + Applications which use autotools (autoconf, automake) + require a recipe which has a source archive listed in + <glossterm><link + linkend='var-SRC_URI'>SRC_URI</link></glossterm> and + <command>inherit autotools</command> to instruct BitBake to use the + <filename>autotools.bbclass</filename> which has + definitions of all the steps + needed to build an autotooled application. + The result of the build will be automatically packaged and if + the application uses NLS to localise then packages with + locale information will be generated (one package per + language). + </para> + + <programlisting> +DESCRIPTION = "GNU Helloworld application" +SECTION = "examples" +LICENSE = "GPLv2" + +SRC_URI = "${GNU_MIRROR}/hello/hello-${PV}.tar.bz2" + +inherit autotools + </programlisting> + + </section> + + <section id='usingpoky-extend-addpkg-makefile'> + <title>Makefile-Based Package</title> + + <para> + Applications which use GNU make require a recipe which has + the source archive listed in <glossterm><link + linkend='var-SRC_URI'>SRC_URI</link></glossterm>. + Adding a <function>do_compile</function> step + is not needed as by default BitBake will start the "make" + command to compile the application. If there is a need for + additional options to make then they should be stored in the + <glossterm><link + linkend='var-EXTRA_OEMAKE'>EXTRA_OEMAKE</link></glossterm> variable - BitBake + will pass them into the GNU + make invocation. A <function>do_install</function> task is required + - otherwise BitBake will run an empty <function>do_install</function> + task by default. + </para> + + <para> + Some applications may require extra parameters to be passed to + the compiler, for example an additional header path. This can + be done buy adding to the <glossterm><link + linkend='var-CFLAGS'>CFLAGS</link></glossterm> variable, as in the example below. + </para> + + <programlisting> +DESCRIPTION = "Tools for managing memory technology devices." +SECTION = "base" +DEPENDS = "zlib" +HOMEPAGE = "http://www.linux-mtd.infradead.org/" +LICENSE = "GPLv2" + +SRC_URI = "ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-${PV}.tar.gz" + +CFLAGS_prepend = "-I ${S}/include " + +do_install() { + oe_runmake install DESTDIR=${D} +} + </programlisting> + + </section> + + <section id='usingpoky-extend-addpkg-files'> + <title>Controlling packages content</title> + + <para> + The variables <glossterm><link + linkend='var-PACKAGES'>PACKAGES</link></glossterm> and + <glossterm><link linkend='var-FILES'>FILES</link></glossterm> are used to split an + application into multiple packages. + </para> + + <para> + Below the "libXpm" recipe is used as an example. By + default the "libXpm" recipe generates one package + which contains the library + and also a few binaries. The recipe can be adapted to + split the binaries into separate packages. + </para> + + <programlisting> +require xorg-lib-common.inc + +DESCRIPTION = "X11 Pixmap library" +LICENSE = "X-BSD" +DEPENDS += "libxext" +PE = "1" + +XORG_PN = "libXpm" + +PACKAGES =+ "sxpm cxpm" +FILES_cxpm = "${bindir}/cxpm" +FILES_sxpm = "${bindir}/sxpm" + </programlisting> + + <para> + In this example we want to ship the "sxpm" and "cxpm" binaries + in separate packages. Since "bindir" would be packaged into the + main <glossterm><link linkend='var-PN'>PN</link></glossterm> + package as standard we prepend the <glossterm><link + linkend='var-PACKAGES'>PACKAGES</link></glossterm> variable so + additional package names are added to the start of list. The + extra <glossterm><link linkend='var-PN'>FILES</link></glossterm>_* + variables then contain information to specify which files and + directories goes into which package. + </para> + </section> + + <section id='usingpoky-extend-addpkg-postinstalls'> + <title>Post Install Scripts</title> + + <para> + To add a post-installation script to a package, add + a <function>pkg_postinst_PACKAGENAME()</function> + function to the .bb file + where PACKAGENAME is the name of the package to attach + the postinst script to. A post-installation function has the following structure: + </para> + <programlisting> +pkg_postinst_PACKAGENAME () { +#!/bin/sh -e +# Commands to carry out +} + </programlisting> + <para> + The script defined in the post installation function + gets called when the rootfs is made. If the script succeeds, + the package is marked as installed. If the script fails, + the package is marked as unpacked and the script will be + executed again on the first boot of the image. + </para> + + <para> + Sometimes it is necessary that the execution of a post-installation + script is delayed until the first boot, because the script + needs to be executed the device itself. To delay script execution + until boot time, the post-installation function should have the + following structure: + </para> + + <programlisting> +pkg_postinst_PACKAGENAME () { +#!/bin/sh -e +if [ x"$D" = "x" ]; then +# Actions to carry out on the device go here +else +exit 1 +fi +} + </programlisting> + + <para> + The structure above delays execution until first boot + because the <glossterm><link + linkend='var-D'>D</link></glossterm> variable points + to the 'image' + directory when the rootfs is being made at build time but + is unset when executed on the first boot. + </para> + </section> + + </section> + + <section id='usingpoky-extend-customimage'> + <title>Customising Images</title> + + <para> + Poky images can be customised to satisfy + particular requirements. Several methods are detailed below + along with guidelines of when to use them. + </para> + + <section id='usingpoky-extend-customimage-custombb'> + <title>Customising Images through a custom image .bb files</title> + + <para> + One way to get additional software into an image is by creating a + custom image. The recipe will contain two lines: + </para> + + <programlisting> +IMAGE_INSTALL = "task-poky-x11-base package1 package2" + +inherit poky-image + </programlisting> + + <para> + By creating a custom image, a developer has total control + over the contents of the image. It is important use + the correct names of packages in the <glossterm><link + linkend='var-IMAGE_INSTALL'>IMAGE_INSTALL</link></glossterm> variable. + The names must be in + the OpenEmbedded notation instead of Debian notation, for example + "glibc-dev" instead of "libc6-dev" etc. + </para> + + <para> + The other method of creating a new image is by modifying + an existing image. For example if a developer wants to add + "strace" into "poky-image-sato" the following recipe can + be used: + </para> + + <programlisting> +require poky-image-sato.bb + +IMAGE_INSTALL += "strace" + </programlisting> + + </section> + + <section id='usingpoky-extend-customimage-customtasks'> + <title>Customising Images through custom tasks</title> + + <para> + For for complex custom images, the best approach is to create a custom + task package which is them used to build the image (or images). A good + example of a tasks package is <filename>meta/packages/tasks/task-poky.bb + </filename>. The <glossterm><link linkend='var-PACKAGES'>PACKAGES</link></glossterm> + variable lists the task packages to build (along with the complimentary + -dbg and -dev packages). For each package added, + <glossterm><link linkend='var-PACKAGES'>RDEPENDS</link></glossterm> and + <glossterm><link linkend='var-PACKAGES'>RRECOMMENDS</link></glossterm> + entries can then be added each containing a list of packages the parent + task package should contain. An example would be: + </para> + + <para> + <programlisting> +DESCRIPTION = "My Custom Tasks" + +PACKAGES = "\ + task-custom-apps \ + task-custom-apps-dbg \ + task-custom-apps-dev \ + task-custom-tools \ + task-custom-tools-dbg \ + task-custom-tools-dev \ + " + +RDEPENDS_task-custom-apps = "\ + dropbear \ + portmap \ + psplash" + +RDEPENDS_task-custom-tools = "\ + oprofile \ + oprofileui-server \ + lttng-control \ + lttng-viewer" + +RRECOMMENDS_task-custom-tools = "\ + kernel-module-oprofile" +</programlisting> + </para> + + <para> + In this example, two tasks packages are created, task-custom-apps and + task-custom-tools with the dependencies and recommended package dependencies + listed. To build an image using these task packages, you would then add + "task-custom-apps" and/or "task-custom-tools" to <glossterm><link + linkend='var-IMAGE_INSTALL'>IMAGE_INSTALL</link></glossterm> or other forms + of image dependencies as described in other areas of this section. + </para> + </section> + + <section id='usingpoky-extend-customimage-imagefeatures'> + <title>Customising Images through custom <glossterm><link linkend='var-IMAGE_FEATURES'>IMAGE_FEATURES</link></glossterm></title> + + <para> + Ultimately users may want to add extra image "features" as used by Poky with the + <glossterm><link linkend='var-IMAGE_FEATURES'>IMAGE_FEATURES</link></glossterm> + variable. To create these, the best reference is <filename>meta/classes/poky-image.bbclass</filename> + which illustrates how poky achieves this. In summary, the file looks at the contents of the + <glossterm><link linkend='var-IMAGE_FEATURES'>IMAGE_FEATURES</link></glossterm> + variable and based on this generates the <glossterm><link linkend='var-IMAGE_INSTALL'> + IMAGE_INSTALL</link></glossterm> variable automatically. Extra features can be added by + extending the class or creating a custom class for use with specialised image .bb files. + </para> + </section> + + <section id='usingpoky-extend-customimage-localconf'> + <title>Customising Images through local.conf</title> + + <para> + It is possible to customise image contents by abusing + variables used by distribution maintainers in local.conf. + This method only allows the addition of packages and + is not recommended. + </para> + + <para> + To add an "strace" package into the image the following is + added to local.conf: + </para> + + <programlisting> +DISTRO_EXTRA_RDEPENDS += "strace" + </programlisting> + + <para> + However, since the <glossterm><link linkend='var-DISTRO_EXTRA_RDEPENDS'> + DISTRO_EXTRA_RDEPENDS</link></glossterm> variable is for + distribution maintainers this method does not make + adding packages as simple as a custom .bb file. Using + this method, a few packages will need to be recreated + and the the image built. + </para> + <programlisting> +bitbake -cclean task-boot task-base task-poky +bitbake poky-image-sato + </programlisting> + + <para> + Cleaning task-* packages is required because they use the + <glossterm><link linkend='var-DISTRO_EXTRA_RDEPENDS'> + DISTRO_EXTRA_RDEPENDS</link></glossterm> variable. There is no need to + build them by hand as Poky images depend on the packages they contain so + dependencies will be built automatically. For this reason we don't use the + "rebuild" task in this case since "rebuild" does not care about + dependencies - it only rebuilds the specified package. + </para> + + </section> + + </section> + +<section id="platdev-newmachine"> + <title>Porting Poky to a new machine</title> + <para> + Adding a new machine to Poky is a straightforward process and + this section gives an idea of the changes that are needed. This guide is + meant to cover adding machines similar to those Poky already supports. + Adding a totally new architecture might require gcc/glibc changes as + well as updates to the site information and, whilst well within Poky's + capabilities, is outside the scope of this section. + </para> + + <section id="platdev-newmachine-conffile"> + <title>Adding the machine configuration file</title> + <para> + A .conf file needs to be added to conf/machine/ with details of the + device being added. The name of the file determines the name Poky will + use to reference this machine. + </para> + + <para> + The most important variables to set in this file are <glossterm> + <link linkend='var-TARGET_ARCH'>TARGET_ARCH</link></glossterm> + (e.g. "arm"), <glossterm><link linkend='var-PREFERRED_PROVIDER'> + PREFERRED_PROVIDER</link></glossterm>_virtual/kernel (see below) and + <glossterm><link linkend='var-MACHINE_FEATURES'>MACHINE_FEATURES + </link></glossterm> (e.g. "kernel26 apm screen wifi"). Other variables + like <glossterm><link linkend='var-SERIAL_CONSOLE'>SERIAL_CONSOLE + </link></glossterm> (e.g. "115200 ttyS0"), <glossterm> + <link linkend='var-KERNEL_IMAGETYPE'>KERNEL_IMAGETYPE</link> + </glossterm> (e.g. "zImage") and <glossterm><link linkend='var-IMAGE_FSTYPES'> + IMAGE_FSTYPES</link></glossterm> (e.g. "tar.gz jffs2") might also be + needed. Full details on what these variables do and the meaning of + their contents is available through the links. + </para> + </section> + + <section id="platdev-newmachine-kernel"> + <title>Adding a kernel for the machine</title> + <para> + Poky needs to be able to build a kernel for the machine. You need + to either create a new kernel recipe for this machine or extend an + existing recipe. There are plenty of kernel examples in the + packages/linux directory which can be used as references. + </para> + <para> + If creating a new recipe the "normal" recipe writing rules apply + for setting up a <glossterm><link linkend='var-SRC_URI'>SRC_URI + </link></glossterm> including any patches and setting <glossterm> + <link linkend='var-S'>S</link></glossterm> to point at the source + code. You will need to create a configure task which configures the + unpacked kernel with a defconfig be that through a "make defconfig" + command or more usually though copying in a suitable defconfig and + running "make oldconfig". By making use of "inherit kernel" and also + maybe some of the linux-*.inc files, most other functionality is + centralised and the the defaults of the class normally work well. + </para> + <para> + If extending an existing kernel it is usually a case of adding a + suitable defconfig file in a location similar to that used by other + machine's defconfig files in a given kernel, possibly listing it in + the SRC_URI and adding the machine to the expression in <glossterm> + <link linkend='var-COMPATIBLE_MACHINES'>COMPATIBLE_MACHINES</link> + </glossterm>. + </para> + </section> + + <section id="platdev-newmachine-formfactor"> + <title>Adding a formfactor configuration file</title> + <para> + A formfactor configuration file provides information about the + target hardware on which Poky is running, and that Poky cannot + obtain from other sources such as the kernel. Some examples of + information contained in a formfactor configuration file include + framebuffer orientation, whether or not the system has a keyboard, + the positioning of the keyboard in relation to the screen, and + screen resolution. + </para> + <para> + Sane defaults should be used in most cases, but if customisation is + necessary you need to create a <filename>machconfig</filename> file + under <filename>meta/packages/formfactor/files/MACHINENAME/</filename> + where <literal>MACHINENAME</literal> is the name for which this infomation + applies. For information about the settings available and the defaults, please see + <filename>meta/packages/formfactor/files/config</filename>. + </para> + </section> +</section> + +<section id='usingpoky-changes'> + <title>Making and Maintaining Changes</title> + + <para> + We recognise that people will want to extend/configure/optimise Poky for + their specific uses, especially due to the extreme configurability and + flexibility Poky offers. To ensure ease of keeping pace with future + changes in Poky we recommend making changes to Poky in a controlled way. + </para> + <para> + Poky supports the idea of <link + linkend='usingpoky-changes-collections'>"collections"</link> which when used + properly can massively ease future upgrades and allow segregation + between the Poky core and a given developer's changes. Some other advice on + managing changes to Poky is also given in the following section. + </para> + + <section id="usingpoky-changes-collections"> + <title>Bitbake Collections</title> + + <para> + Often, people want to extend Poky either through adding packages + or overriding files contained within Poky to add their own + functionality. Bitbake has a powerful mechanism called + collections which provide a way to handle this which is fully + supported and actively encouraged within Poky. + </para> + <para> + In the standard tree, meta-extras is an example of how you can + do this. As standard the data in meta-extras is not used on a + Poky build but local.conf.sample shows how to enable it: + </para> + <para> + <literallayout class='monospaced'> +BBFILES := "${OEROOT}/meta/packages/*/*.bb ${OEROOT}/meta-extras/packages/*/*.bb" +BBFILE_COLLECTIONS = "normal extras" +BBFILE_PATTERN_normal = "^${OEROOT}/meta/" +BBFILE_PATTERN_extras = "^${OEROOT}/meta-extras/" +BBFILE_PRIORITY_normal = "5" +BBFILE_PRIORITY_extras = "5"</literallayout> + </para> + <para> + As can be seen, the extra recipes are added to BBFILES. The + BBFILE_COLLECTIONS variable is then set to contain a list of + collection names. The BBFILE_PATTERN variables are regular + expressions used to match files from BBFILES into a particular + collection in this case by using the base pathname. + The BBFILE_PRIORITY variable then assigns the different + priorities to the files in different collections. This is useful + in situations where the same package might appear in both + repositories and allows you to choose which collection should + 'win'. + </para> + <para> + This works well for recipes. For bbclasses and configuration + files, you can use the BBPATH environment variable. In this + case, the first file with the matching name found in BBPATH is + the one that is used, just like the PATH variable for binaries. + </para> + </section> + + + <section id='usingpoky-changes-commits'> + <title>Committing Changes</title> + + <para> + Modifications to Poky are often managed under some kind of source + revision control system. The policy for committing to such systems + is important as some simple policy can significantly improve + usability. The tips below are based on the policy that OpenedHand + uses for commits to Poky. + </para> + + <para> + It helps to use a consistent style for commit messages when committing + changes. We've found a style where the first line of a commit message + summarises the change and starts with the name of any package affected + work well. Not all changes are to specific packages so the prefix could + also be a machine name or class name instead. If a change needs a longer + description this should follow the summary. + </para> + + <para> + Any commit should be self contained in that it should leave the + metadata in a consistent state, buildable before and after the + commit. This helps ensure the autobuilder test results are valid + but is good practice regardless. + </para> + </section> + + <section id='usingpoky-changes-prbump'> + <title>Package Revision Incrementing</title> + + <para> + If a committed change will result in changing the package output + then the value of the <glossterm><link linkend='var-PR'>PR</link> + </glossterm> variable needs to be increased (commonly referred to + as 'bumped') as part of that commit. Only integer values are used + and <glossterm><link linkend='var-PR'>PR</link></glossterm> = + "r0" should not be added into new recipes as this is default value. + When upgrading the version of a package (<glossterm><link + linkend='var-PV'>PV</link></glossterm>), the <glossterm><link + linkend='var-PR'>PR</link></glossterm> variable should be removed. + </para> + + <para> + The aim is that the package version will only ever increase. If + for some reason <glossterm><link linkend='var-PV'>PV</link></glossterm> + will change and but not increase, the <glossterm><link + linkend='var-PE'>PE</link></glossterm> (Package Epoch) can + be increased (it defaults to '0'). The version numbers aim to + follow the <ulink url='http://www.debian.org/doc/debian-policy/ch-controlfields.html'> + Debian Version Field Policy Guidelines</ulink> which define how + versions are compared and hence what "increasing" means. + </para> + + <para> + There are two reasons for doing this, the first is to ensure that + when a developer updates and rebuilds, they get all the changes to + the repository and don't have to remember to rebuild any sections. + The second is to ensure that target users are able to upgrade their + devices via their package manager such as with the <command> + ipkg update;ipkg upgrade</command> commands (or similar for + dpkg/apt or rpm based systems). The aim is to ensure Poky has + upgradable packages in all cases. + </para> + </section> + </section> + + <section id='usingpoky-modifing-packages'> + <title>Modifying Package Source Code</title> + + <para> + Poky is usually used to build software rather than modifying + it. However, there are ways Poky can be used to modify software. + </para> + + <para> + During building, the sources are available in <glossterm><link + linkend='var-WORKDIR'>WORKDIR</link></glossterm> directory. + Where exactly this is depends on the type of package and the + architecture of target device. For a standard recipe not + related to <glossterm><link + linkend='var-MACHINE'>MACHINE</link></glossterm> it will be + <filename>tmp/work/PACKAGE_ARCH-poky-TARGET_OS/PN-PV-PR/</filename>. + Target device dependent packages use <glossterm><link + linkend='var-MACHINE'>MACHINE + </link></glossterm> + instead of <glossterm><link linkend='var-PACKAGE_ARCH'>PACKAGE_ARCH + </link></glossterm> + in the directory name. + </para> + + <tip> + <para> + Check the package recipe sets the <glossterm><link + linkend='var-S'>S</link></glossterm> variable to something + other than standard <filename>WORKDIR/PN-PV/</filename> value. + </para> + </tip> + <para> + After building a package, a user can modify the package source code + without problem. The easiest way to test changes is by calling the + "compile" task: + </para> + + <programlisting> +bitbake --cmd compile --force NAME_OF_PACKAGE + </programlisting> + + <para> + Other tasks may also be called this way. + </para> + + <section id='usingpoky-modifying-packages-quilt'> + <title>Modifying Package Source Code with quilt</title> + + <para> + By default Poky uses <ulink + url='http://savannah.nongnu.org/projects/quilt'>quilt</ulink> + to manage patches in <function>do_patch</function> task. + It is a powerful tool which can be used to track all + modifications done to package sources. + </para> + + <para> + Before modifying source code it is important to + notify quilt so it will track changes into new patch + file: + <programlisting> +quilt new NAME-OF-PATCH.patch + </programlisting> + + Then add all files which will be modified into that + patch: + <programlisting> +quilt add file1 file2 file3 + </programlisting> + + Now start editing. At the end quilt needs to be used + to generate final patch which will contain all + modifications: + <programlisting> +quilt refresh + </programlisting> + + The resulting patch file can be found in the + <filename class="directory">patches/</filename> subdirectory of the source + (<glossterm><link linkend='var-S'>S</link></glossterm>) directory. For future builds it + should be copied into + Poky metadata and added into <glossterm><link + linkend='var-SRC_URI'>SRC_URI</link></glossterm> of a recipe: + <programlisting> +SRC_URI += "file://NAME-OF-PATCH.patch;patch=1" + </programlisting> + + This also requires a bump of <glossterm><link + linkend='var-PR'>PR</link></glossterm> value in the same recipe as we changed resulting packages. + </para> + + </section> + +</section> + +</chapter> +<!-- +vim: expandtab tw=80 ts=4 +--> |