documentation: Changed all manual links to point to "latest"

There are many references to YP documentation throughout the
YP manual set.  They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development.  Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.

This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number.  So for example, all the "latest" occurences
would need to be changed to "1.2".  Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.

(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

4 files changed, 11 insertions, 11 deletions

diff --git a/documentation/adt-manual/adt-eclipse.xml b/documentation/adt-manual/adt-eclipse.xml
index c1b241c567..764f808e7e 100644
--- a/documentation/adt-manual/adt-eclipse.xml
+++ b/documentation/adt-manual/adt-eclipse.xml
@@ -349,8 +349,8 @@
                         The pull-down menu should have the supported architectures.  
                         If the architecture you need is not listed in the menu, you 
                         will need to build the image.
-                        See the "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the  
-                        <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+                        See the "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the  
+                        <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
                         The Yocto Project Quick Start</ulink> for more information.</para></listitem>
                 </itemizedlist>
             </para>
diff --git a/documentation/adt-manual/adt-manual.xml b/documentation/adt-manual/adt-manual.xml
index e6f3116b3a..7b6b73f45e 100644
--- a/documentation/adt-manual/adt-manual.xml
+++ b/documentation/adt-manual/adt-manual.xml
@@ -58,7 +58,7 @@
       <note>
           Due to production processes, there could be differences between the Yocto Project
           documentation bundled in the release tarball and the 
-          <ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>
+          <ulink url='http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html'>
           Application Developer's Toolkit (ADT) User's Guide</ulink> on
           the <ulink url='http://www.yoctoproject.org'>Yocto Project</ulink> website.
           For the latest version of this manual, see the manual on the website.
diff --git a/documentation/adt-manual/adt-package.xml b/documentation/adt-manual/adt-package.xml
index c035c2d011..41e62b1446 100644
--- a/documentation/adt-manual/adt-package.xml
+++ b/documentation/adt-manual/adt-package.xml
@@ -54,8 +54,8 @@
 
     <note>
         For build performance information related to the PMS, see
-        <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-classes-package'>Packaging - <filename>package*.bbclass</filename></ulink> 
-        in <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+        <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-classes-package'>Packaging - <filename>package*.bbclass</filename></ulink> 
+        in <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
         The Yocto Project Reference Manual</ulink>.
     </note>
 
diff --git a/documentation/adt-manual/adt-prepare.xml b/documentation/adt-manual/adt-prepare.xml
index 3fa59ec19e..098ff75ec7 100644
--- a/documentation/adt-manual/adt-prepare.xml
+++ b/documentation/adt-manual/adt-prepare.xml
@@ -164,9 +164,9 @@
             <note>
                 The ADT Installer requires the <filename>libtool</filename> package to complete.  
                 If you install the recommended packages as described in the 
-                "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>Packages</ulink>"
+                "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#packages'>Packages</ulink>"
                 section of 
-                <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+                <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
                 The Yocto Project Quick Start</ulink>, then you will have libtool installed.
             </note>
 
@@ -330,9 +330,9 @@
             To get the kernel and filesystem images, you either have to build them or download
             pre-built versions.
             You can find examples for both these situations in the 
-            "<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#test-run'>A
+            "<ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html#test-run'>A
             Quick Test Run</ulink>" section of   
-            <ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html'>
+            <ulink url='http://www.yoctoproject.org/docs/latest/yocto-project-qs/yocto-project-qs.html'>
             The Yocto Project Quick Start</ulink>.
         </para>
 
@@ -345,8 +345,8 @@
             area - <ulink url='http://www.yoctoproject.org/downloads/yocto-1.1/machines/'></ulink>
             and are ideal for experimentation within Yocto Project.
             For information on the image types you can build using the Yocto Project, see the
-            "<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" appendix in  
-            <ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
+            "<ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" appendix in  
+            <ulink url='http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html'>
             The Yocto Project Reference Manual</ulink>.
         </para>