path: root/meta-oe/recipes-graphics/libvncserver/libvncserver/0002-common-add-sha1.patch

diff --git a/common/sha1.c b/common/sha1.c
new file mode 100644
index 0000000..988b188
--- /dev/null
+++ b/common/sha1.c
@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) The Internet Society (2001).  All Rights Reserved.
+ *
+ * This document and translations of it may be copied and furnished to
+ * others, and derivative works that comment on or otherwise explain it
+ * or assist in its implementation may be prepared, copied, published
+ * and distributed, in whole or in part, without restriction of any
+ * kind, provided that the above copyright notice and this paragraph are
+ * included on all such copies and derivative works.  However, this
+ * document itself may not be modified in any way, such as by removing
+ * the copyright notice or references to the Internet Society or other
+ * Internet organizations, except as needed for the purpose of
+ * developing Internet standards in which case the procedures for
+ * copyrights defined in the Internet Standards process must be
+ * followed, or as required to translate it into languages other than
+ * English.
+ *
+ * The limited permissions granted above are perpetual and will not be
+ * revoked by the Internet Society or its successors or assigns.
+ *
+ * This document and the information contained herein is provided on an
+ * "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
+ * TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+ * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
+ * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ *  sha1.c
+ *
+ *  Description:
+ *      This file implements the Secure Hashing Algorithm 1 as
+ *      defined in FIPS PUB 180-1 published April 17, 1995.
+ *
+ *      The SHA-1, produces a 160-bit message digest for a given
+ *      data stream.  It should take about 2**n steps to find a
+ *      message with the same digest as a given message and
+ *      2**(n/2) to find any two messages with the same digest,
+ *      when n is the digest size in bits.  Therefore, this
+ *      algorithm can serve as a means of providing a
+ *      "fingerprint" for a message.
+ *
+ *  Portability Issues:
+ *      SHA-1 is defined in terms of 32-bit "words".  This code
+ *      uses <stdint.h> (included via "sha1.h" to define 32 and 8
+ *      bit unsigned integer types.  If your C compiler does not
+ *      support 32 bit unsigned integers, this code is not
+ *      appropriate.
+ *
+ *  Caveats:
+ *      SHA-1 is designed to work with messages less than 2^64 bits
+ *      long.  Although SHA-1 allows a message digest to be generated
+ *      for messages of any number of bits less than 2^64, this
+ *      implementation only works with messages with a length that is
+ *      a multiple of the size of an 8-bit character.
+ *
+ */
+
+#include "sha1.h"
+
+/*
+ *  Define the SHA1 circular left shift macro
+ */
+#define SHA1CircularShift(bits,word) \
+                (((word) << (bits)) | ((word) >> (32-(bits))))
+
+/* Local Function Prototyptes */
+void SHA1PadMessage(SHA1Context *);
+void SHA1ProcessMessageBlock(SHA1Context *);
+
+/*
+ *  SHA1Reset
+ *
+ *  Description:
+ *      This function will initialize the SHA1Context in preparation
+ *      for computing a new SHA1 message digest.
+ *
+ *  Parameters:
+ *      context: [in/out]
+ *          The context to reset.
+ *
+ *  Returns:
+ *      sha Error Code.
+ *
+ */
+int SHA1Reset(SHA1Context *context)
+{
+    if (!context)
+    {
+        return shaNull;
+    }
+
+    context->Length_Low             = 0;
+    context->Length_High            = 0;
+    context->Message_Block_Index    = 0;
+
+    context->Intermediate_Hash[0]   = 0x67452301;
+    context->Intermediate_Hash[1]   = 0xEFCDAB89;
+    context->Intermediate_Hash[2]   = 0x98BADCFE;
+    context->Intermediate_Hash[3]   = 0x10325476;
+    context->Intermediate_Hash[4]   = 0xC3D2E1F0;
+
+    context->Computed   = 0;
+    context->Corrupted  = 0;
+    return shaSuccess;
+}
+
+/*
+ *  SHA1Result
+ *
+ *  Description:
+ *      This function will return the 160-bit message digest into the
+ *      Message_Digest array  provided by the caller.
+ *      NOTE: The first octet of hash is stored in the 0th element,
+ *            the last octet of hash in the 19th element.
+ *
+ *  Parameters:
+ *      context: [in/out]
+ *          The context to use to calculate the SHA-1 hash.
+ *      Message_Digest: [out]
+ *          Where the digest is returned.
+ *
+ *  Returns:
+ *      sha Error Code.
+ *
+ */
+int SHA1Result( SHA1Context *context,
+                uint8_t Message_Digest[SHA1HashSize])
+{
+    int i;
+
+    if (!context || !Message_Digest)
+    {
+        return shaNull;
+    }
+
+    if (context->Corrupted)
+    {
+        return context->Corrupted;
+    }
+
+    if (!context->Computed)
+    {
+        SHA1PadMessage(context);
+        for(i=0; i<64; ++i)
+        {
+            /* message may be sensitive, clear it out */
+            context->Message_Block[i] = 0;
+        }
+        context->Length_Low = 0;    /* and clear length */
+        context->Length_High = 0;
+        context->Computed = 1;
+    }
+
+    for(i = 0; i < SHA1HashSize; ++i)
+    {
+        Message_Digest[i] = context->Intermediate_Hash[i>>2]
+                            >> 8 * ( 3 - ( i & 0x03 ) );
+    }
+
+    return shaSuccess;
+}
+
+/*
+ *  SHA1Input
+ *
+ *  Description:
+ *      This function accepts an array of octets as the next portion
+ *      of the message.
+ *
+ *  Parameters:
+ *      context: [in/out]
+ *          The SHA context to update
+ *      message_array: [in]
+ *          An array of characters representing the next portion of
+ *          the message.
+ *      length: [in]
+ *          The length of the message in message_array
+ *
+ *  Returns:
+ *      sha Error Code.
+ *
+ */
+int SHA1Input(    SHA1Context    *context,
+                  const uint8_t  *message_array,
+                  unsigned       length)
+{
+    if (!length)
+    {
+        return shaSuccess;
+    }
+
+    if (!context || !message_array)
+    {
+        return shaNull;
+    }
+
+    if (context->Computed)
+    {
+        context->Corrupted = shaStateError;
+        return shaStateError;
+    }
+
+    if (context->Corrupted)
+    {
+         return context->Corrupted;
+    }
+    while(length-- && !context->Corrupted)
+    {
+    context->Message_Block[context->Message_Block_Index++] =
+                    (*message_array & 0xFF);
+
+    context->Length_Low += 8;
+    if (context->Length_Low == 0)
+    {
+        context->Length_High++;
+        if (context->Length_High == 0)
+        {
+            /* Message is too long */
+            context->Corrupted = 1;
+        }
+    }
+
+    if (context->Message_Block_Index == 64)
+    {
+        SHA1ProcessMessageBlock(context);
+    }
+
+    message_array++;
+    }
+
+    return shaSuccess;
+}
+
+/*
+ *  SHA1ProcessMessageBlock
+ *
+ *  Description:
+ *      This function will process the next 512 bits of the message
+ *      stored in the Message_Block array.
+ *
+ *  Parameters:
+ *      None.
+ *
+ *  Returns:
+ *      Nothing.
+ *
+ *  Comments:
+ *      Many of the variable names in this code, especially the
+ *      single character names, were used because those were the
+ *      names used in the publication.
+ *
+ *
+ */
+void SHA1ProcessMessageBlock(SHA1Context *context)
+{
+    const uint32_t K[] =    {       /* Constants defined in SHA-1   */
+                            0x5A827999,
+                            0x6ED9EBA1,
+                            0x8F1BBCDC,
+                            0xCA62C1D6
+                            };
+    int           t;                 /* Loop counter                */
+    uint32_t      temp;              /* Temporary word value        */
+    uint32_t      W[80];             /* Word sequence               */
+    uint32_t      A, B, C, D, E;     /* Word buffers                */
+
+    /*
+     *  Initialize the first 16 words in the array W
+     */
+    for(t = 0; t < 16; t++)
+    {
+        W[t] = context->Message_Block[t * 4] << 24;
+        W[t] |= context->Message_Block[t * 4 + 1] << 16;
+        W[t] |= context->Message_Block[t * 4 + 2] << 8;
+        W[t] |= context->Message_Block[t * 4 + 3];
+    }
+
+    for(t = 16; t < 80; t++)
+    {
+       W[t] = SHA1CircularShift(1,W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]);
+    }
+
+    A = context->Intermediate_Hash[0];
+    B = context->Intermediate_Hash[1];
+    C = context->Intermediate_Hash[2];
+    D = context->Intermediate_Hash[3];
+    E = context->Intermediate_Hash[4];
+
+    for(t = 0; t < 20; t++)
+    {
+        temp =  SHA1CircularShift(5,A) +
+                ((B & C) | ((~B) & D)) + E + W[t] + K[0];
+        E = D;
+        D = C;
+        C = SHA1CircularShift(30,B);
+        B = A;
+        A = temp;
+    }
+
+    for(t = 20; t < 40; t++)
+    {
+        temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[1];
+        E = D;
+        D = C;
+        C = SHA1CircularShift(30,B);
+        B = A;
+        A = temp;
+    }
+
+    for(t = 40; t < 60; t++)
+    {
+        temp = SHA1CircularShift(5,A) +
+               ((B & C) | (B & D) | (C & D)) + E + W[t] + K[2];
+        E = D;
+        D = C;
+        C = SHA1CircularShift(30,B);
+        B = A;
+        A = temp;
+    }
+
+    for(t = 60; t < 80; t++)
+    {
+        temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[3];
+        E = D;
+        D = C;
+        C = SHA1CircularShift(30,B);
+        B = A;
+        A = temp;
+    }
+
+    context->Intermediate_Hash[0] += A;
+    context->Intermediate_Hash[1] += B;
+    context->Intermediate_Hash[2] += C;
+    context->Intermediate_Hash[3] += D;
+    context->Intermediate_Hash[4] += E;
+
+    context->Message_Block_Index = 0;
+}
+
+
+/*
+ *  SHA1PadMessage
+ *
+ *  Description:
+ *      According to the standard, the message must be padded to an even
+ *      512 bits.  The first padding bit must be a '1'.  The last 64
+ *      bits represent the length of the original message.  All bits in
+ *      between should be 0.  This function will pad the message
+ *      according to those rules by filling the Message_Block array
+ *      accordingly.  It will also call the ProcessMessageBlock function
+ *      provided appropriately.  When it returns, it can be assumed that
+ *      the message digest has been computed.
+ *
+ *  Parameters:
+ *      context: [in/out]
+ *          The context to pad
+ *      ProcessMessageBlock: [in]
+ *          The appropriate SHA*ProcessMessageBlock function
+ *  Returns:
+ *      Nothing.
+ *
+ */
+
+void SHA1PadMessage(SHA1Context *context)
+{
+    /*
+     *  Check to see if the current message block is too small to hold
+     *  the initial padding bits and length.  If so, we will pad the
+     *  block, process it, and then continue padding into a second
+     *  block.
+     */
+    if (context->Message_Block_Index > 55)
+    {
+        context->Message_Block[context->Message_Block_Index++] = 0x80;
+        while(context->Message_Block_Index < 64)
+        {
+            context->Message_Block[context->Message_Block_Index++] = 0;
+        }
+
+        SHA1ProcessMessageBlock(context);
+
+        while(context->Message_Block_Index < 56)
+        {
+            context->Message_Block[context->Message_Block_Index++] = 0;
+        }
+    }
+    else
+    {
+        context->Message_Block[context->Message_Block_Index++] = 0x80;
+        while(context->Message_Block_Index < 56)
+        {
+            context->Message_Block[context->Message_Block_Index++] = 0;
+        }
+    }
+
+    /*
+     *  Store the message length as the last 8 octets
+     */
+    context->Message_Block[56] = context->Length_High >> 24;
+    context->Message_Block[57] = context->Length_High >> 16;
+    context->Message_Block[58] = context->Length_High >> 8;
+    context->Message_Block[59] = context->Length_High;
+    context->Message_Block[60] = context->Length_Low >> 24;
+    context->Message_Block[61] = context->Length_Low >> 16;
+    context->Message_Block[62] = context->Length_Low >> 8;
+    context->Message_Block[63] = context->Length_Low;
+
+    SHA1ProcessMessageBlock(context);
+}
diff --git a/common/sha1.h b/common/sha1.h
new file mode 100644
index 0000000..1d49b1b
--- /dev/null
+++ b/common/sha1.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) The Internet Society (2001).  All Rights Reserved.
+ *
+ * This document and translations of it may be copied and furnished to
+ * others, and derivative works that comment on or otherwise explain it
+ * or assist in its implementation may be prepared, copied, published
+ * and distributed, in whole or in part, without restriction of any
+ * kind, provided that the above copyright notice and this paragraph are
+ * included on all such copies and derivative works.  However, this
+ * document itself may not be modified in any way, such as by removing
+ * the copyright notice or references to the Internet Society or other
+ * Internet organizations, except as needed for the purpose of
+ * developing Internet standards in which case the procedures for
+ * copyrights defined in the Internet Standards process must be
+ * followed, or as required to translate it into languages other than
+ * English.
+ *
+ * The limited permissions granted above are perpetual and will not be
+ * revoked by the Internet Society or its successors or assigns.
+ *
+ * This document and the information contained herein is provided on an
+ * "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
+ * TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+ * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
+ * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ *  sha1.h
+ *
+ *  Description:
+ *      This is the header file for code which implements the Secure
+ *      Hashing Algorithm 1 as defined in FIPS PUB 180-1 published
+ *      April 17, 1995.
+ *
+ *      Many of the variable names in this code, especially the
+ *      single character names, were used because those were the names
+ *      used in the publication.
+ *
+ *      Please read the file sha1.c for more information.
+ *
+ */
+
+
+#ifndef _SHA1_H_
+#define _SHA1_H_
+
+#include <stdint.h>
+/*
+ * If you do not have the ISO standard stdint.h header file, then you
+ * must typdef the following:
+ *    name              meaning
+ *  uint32_t         unsigned 32 bit integer
+ *  uint8_t          unsigned 8 bit integer (i.e., unsigned char)
+ *  int_least16_t    integer of >= 16 bits
+ *
+ */
+
+#ifndef _SHA_enum_
+#define _SHA_enum_
+enum
+{
+    shaSuccess = 0,
+    shaNull,            /* Null pointer parameter */
+    shaInputTooLong,    /* input data too long */
+    shaStateError       /* called Input after Result */
+};
+#endif
+#define SHA1HashSize 20
+
+/*
+ *  This structure will hold context information for the SHA-1
+ *  hashing operation
+ */
+typedef struct SHA1Context
+{
+    uint32_t Intermediate_Hash[SHA1HashSize/4]; /* Message Digest  */
+
+    uint32_t Length_Low;            /* Message length in bits      */
+    uint32_t Length_High;           /* Message length in bits      */
+
+                               /* Index into message block array   */
+    int_least16_t Message_Block_Index;
+    uint8_t Message_Block[64];      /* 512-bit message blocks      */
+
+    int Computed;               /* Is the digest computed?         */
+    int Corrupted;             /* Is the message digest corrupted? */
+} SHA1Context;
+
+/*
+ *  Function Prototypes
+ */
+int SHA1Reset(  SHA1Context *);
+int SHA1Input(  SHA1Context *,
+                const uint8_t *,
+                unsigned int);
+int SHA1Result( SHA1Context *,
+                uint8_t Message_Digest[SHA1HashSize]);
+
+#endif