Age | Commit message (Collapse) | Author |
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
|
|
The llvm-config wrapper has an error message that is quite abrupt, expand it so
it helps the user.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* set NOAUTOPACKAGEDEBUG to disable automatic creation of -dbg FILES split
* it doesn't work well with our do_split_packages calls and in the end breaks
installing llvm3.3-dbg (e.g. when you enable IMAGE_GEN_DEBUGFS)
* it shows a bit ugly error where multiple messages are written over
each other:
WARNING: [log_check] In line: [ConfiCollected errors:
]
WARNING: [log_check] luneos-dev-image: found an error message in the logfile (keyword 'Collected errors'):
[log_check] ConfiCollected errors:
ERROR:
ConfiCollected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for llvm3.3-dbg:
* libllvm3.3-lto-dbg * libllvm3.3-llvm-3.3-dbg *
* opkg_install: Cannot install package llvm3.3-dbg.
guring gstreamer1.0-libav-dbg.
but the main point is that do_split_packages returns some package
names of packages which in the end aren't created, because there
are no files in them after other -dbg packages eat them all due
to automatic -dbg creation
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* If llvm.inc is used for native and nativesdk class packages, the
resulting llvm-config is broken since "${base_libdir}" is prefixed
with the full patch to sysroot
* Replace "/lib" with "/${baselib}" instead of "${base_libdir}" as
"${base_libdir}" is the full path and "${baselib}" is the name of
the multilib directory.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Acked-by: Denys Dmytriyenko <denys@ti.com>
Tested-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* keep them RRECOMMENDed from -dev
* fixes following QA error:
NOTE: recipe llvm3.3-3.3-r0: task do_package_qa: Started
ERROR: QA Issue:
-dev package contains non-symlink .so: llvm3.3-dev path 'llvm3.3/3.3-r0/packages-split/llvm3.3-dev/usr/lib/llvm3.3/LLVMHello.so'
-dev package contains non-symlink .so: llvm3.3-dev path 'llvm3.3/3.3-r0/packages-split/llvm3.3-dev/usr/lib/llvm3.3/BugpointPasses.so' [dev-elf]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* all dynamically created packages start with libllvm${LLVM_RELEASE}-
libllvm${LLVM_RELEASE}-%s-dbg
libllvm${LLVM_RELEASE}-%s
libllvm${LLVM_RELEASE}-%s-staticdev
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
breakpad, php, mozjs, libopus: disable thumb where it fails for qemuarm
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Error is cosmetic, but distracting. Backport upstream fix.
| .../build-vbox32/tmp/work/core2-32-rdk-linux-musl/llvm3.3/3.3-r0/llvm-3.3.src/configure: line 1990: -O2: command not found
| .../build-vbox32/tmp/work/core2-32-rdk-linux-musl/llvm3.3/3.3-r0/llvm-3.3.src/configure: line 1991: -O2: command not found
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Fix the hardcoded libdir in llvm-config and Makefile.config
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* mesa is now using 3.3 by default and I don't know about any llvm2* users
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* now when insane_qa is moved to separate task, we cannot set INSANE_SKIP in do_package task
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
cmake.bbclass as of oe-core 783fb88 defaults to out-of-tree builds. Use that
functionality directly to clean up the recipe.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* 3.3 is used by default mesa config, 2.8 is used in meta-java, keep 2.9 as last in 2*
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
/usr/lib/libLLVM-*.so was being split into the dev package but it should
be in the lib package otherwise software that depends on the LLVM shared
library will be unable to to locate it when the dev package isn't
installed.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* it fails without it:
| -- Could NOT find Perl (missing: PERL_EXECUTABLE)
| CMake Error at tools/llvm-config/CMakeLists.txt:5 (message):
| Perl required but not found!
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The options added to EXTRA_OECONF in llvm3.inc were being overwritten
with --enable-zlib in llvm3.3_3.3.bb.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* it's autodetected from sysroot
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* use split for llvm3.* like we did for llvm2.*
* use PACKAGESPLITFUNCS instead of populate_packages_prepend
* improve regexp in PACKAGES_DYNAMIC
* append ${LLVM_RELEASE} to split package name, otherwise sstate
will complain about multiple recipes trying to install pkgdata
* split also -staticdev and -dbg libs, PN-dbg and PN-staticdev
were huge, let old PN-dbg/PN-staticdev to RDEPEND on splitted
packages
* mesa packages libegl-gallium, libgbm-gallium, mesa-driver-pipe-swrast,
mesa-driver-pipe-vmwgfx, mesa-driver-swrast, mesa-driver-vmwgfx are
now depending only on libllvm3.2-llvm-3.2 (>= 3.2) instead of main
llvm3.2 package, but for llvm-3* it's not big improvement
(installed size wise), because libLLVM-3.2.so was creating 99% of that
size.
* there are still some huge packages:
llvm2.8-dbg is huge because BUILD_SHARED_LIBS is disabled for 2.8
causing all binaries in ${bindir}/.debug to contain big
static libs
llvm2.9 is missing, because it has BUILD_SHARED_LIBS enabled and
unlike 3.* it doesn't build static versions at all unless
explicitly requested
51M llvm-test/llvm3.2/3.2-r0/packages-split/libllvm3.2-llvmselectiondag-staticdev
53M llvm-test/llvm2.8/2.8-r3/packages-split/llvm2.8-dev
54M llvm-test/llvm2.8/2.8-r3/packages-split/libllvm2.8-llvmanalysis-staticdev
55M llvm-test/llvm3.3/3.3-r0/packages-split/libllvm3.3-llvmselectiondag-staticdev
62M llvm-test/llvm3.2/3.2-r0/packages-split/libllvm3.2-llvmanalysis-staticdev
63M llvm-test/llvm3.3/3.3-r0/packages-split/libllvm3.3-llvmanalysis-staticdev
67M llvm-test/llvm2.9/2.9-r3/packages-split/llvm2.9-dbg
90M llvm-test/llvm3.2/3.2-r0/packages-split/llvm3.2-dbg
92M llvm-test/llvm3.3/3.3-r0/packages-split/llvm3.3-dbg
102M llvm-test/llvm2.8/2.8-r3/packages-split/libllvm2.8-llvmcodegen-staticdev
127M llvm-test/llvm3.2/3.2-r0/packages-split/libllvm3.2-llvmcodegen-staticdev
133M llvm-test/llvm3.3/3.3-r0/packages-split/libllvm3.3-llvmcodegen-staticdev
190M llvm-test/llvm3.2/3.2-r0/packages-split/libllvm3.2-llvm-3.2-dbg
207M llvm-test/llvm3.3/3.3-r0/packages-split/libllvm3.3-llvm-3.3-dbg
628M llvm-test/llvm2.8/2.8-r3/packages-split/llvm2.8-dbg
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* there is llvm-config in binconfig/LLVM_RELEASE
* this one was creating conflict between different llvm*-dev versions
installed on target:
./llvm2.9/2.9-r3/packages-split/llvm2.9-dev/usr/bin/llvm2.9/llvm-config
./llvm2.9/2.9-r3/packages-split/llvm2.9-dev/usr/bin/llvm-config
./llvm2.8/2.8-r3/packages-split/llvm2.8-dev/usr/bin/llvm2.8/llvm-config
./llvm2.8/2.8-r3/packages-split/llvm2.8-dev/usr/bin/llvm-config
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* unlike other recipes where we have a rule to keep only one
version, llvm is different so we'll keep .inc files
* llvm.inc is shared by all, llvm[23].inc are separated because
2.* is built with cmake and 3.* with automake
* fix staticdev packaging and move it to shared llvm.inc
FILES_${PN}-static-dev = "${libdir}/${LLVM_DIR}/*.a"
(it's staticdev not static-dev)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
arm_fenv_uclibc.patch was copied from llvm3.2 recipe.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The llvm-config2.x script doesn't get placed in the target sysroot
crosscripts directory otherwise.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The llvm-config script doesn't get placed in the target sysroot
crossscripts directory otherwise.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Setting LLVM_RELEASE is redundant as the version can be retrieved from
PV instead.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
arm_fenv_uclibc.patch was copied from llvm2.9 recipe.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
This avoids QA Issue where tblgen has an rpath to lib in the shadow
build directory.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* fix parallel build
Doing a parallel build may result in the following:
*** No rule to make target `native/bin/tblgen', needed by `include/llvm/Intrinsics.gen.tmp'
Avoid this by building tblgen first before building the rest of llvm.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* now I see why it was there before, at least on arm it fails with:
| CMake Error at cmake/modules/LLVMConfig.cmake:127 (message):
| Library `X86' not found in list of llvm libraries.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* when building for qemux86* it tries to build X86 twice and fails with:
| CMake Error at lib/Target/CMakeLists.txt:24 (add_subdirectory):
| The binary directory
|
| /home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/x86_64-oe-linux/llvm2.9/2.9-r2.0/llvm-2.9/build/lib/Target/X86
|
| is already used to build a source directory. It cannot be used to build
| source directory
|
| /home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/x86_64-oe-linux/llvm2.9/2.9-r2.0/llvm-2.9/lib/Target/X86
|
| Specify a unique binary directory name.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* khem: could you check what I'm doing wrong? This is out of my league..
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* llvm is generic enough to be useful outside meta-java
e.g. we need it to enable llvmpipe galium driver in mesa
* imported without any modification (except indentation), all
credits go to Henning Heinold and Khem Raj for maintaining
it in meta-java
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* llvm is generic enough to be useful outside meta-java
e.g. we need it to enable llvmpipe galium driver in mesa
* imported without any modification (except indentation), all
credits go to Henning Heinold and Khem Raj for maintaining
it in meta-java
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|