aboutsummaryrefslogtreecommitdiffstats
path: root/meta-networking/recipes-protocols/net-snmp
AgeCommit message (Collapse)Author
2018-06-25net-snmp: Refresh openssl support patchKhem Raj
Avoid fuzz warnings Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-06-12net-snmp: add support for openssl 1.1xAndrej Valek
Patch was copied from [https://sourceforge.net/p/net-snmp/patches/1336]. Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-05-29net-snmp: add UPSTREAM_CHECK_URIYi Zhao
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-04-13net-snmp: refresh patchesArmin Kuster
WARNING: net-snmp-5.7.3-r0 do_patch: Some of the context lines in patches were ignored. This can lead to incorrectly applied patches. The context lines in the patches can be updated with devtool: devtool modify <recipe> devtool finish --force-patch-refresh <recipe> <layer_path> Then the updated patches and the source tree (in devtool's workspace) should be reviewed to make sure the patches apply in the correct place and don't introduce duplicate lines (which can, and does happen when some of the context is ignored). Further information: http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.html https://bugzilla.yoctoproject.org/show_bug.cgi?id=10450 Details: Applying patch 0001-BUG-a2584-Fix-snmptrap-to-use-clientaddr-from-snmp.c.patch patching file snmplib/transports/snmpUDPIPv6Domain.c Hunk #1 succeeded at 286 with fuzz 2 (offset 30 lines). Now at patch 0001-BUG-a2584-Fix-snmptrap-to-use-clientaddr-from-snmp.c.patch Signed-off-by: Armin Kuster <akuster808@gmail.com>
2018-03-05net-snmp: Fix compiler options with paths in net-snmp-configKhem Raj
options which involve paths into workspace are usually filtered out with the sed command, however currently it does half the job and the resulting config file gets partial replacements leaving the compiler options with bad syntax e.g. -fdebug-prefix-map option is left with -fdebug-prefix-map= which is not correct syntax, the effect of this is seen in other recipes which then invoke net-snmp-config script and add the flags obtained from this script into its own configure scripts and then tries to execute tests, these tests fail because of bad compiler options e.g. keepalived where configure tests fails like | configure: error: *** incorrect CFLAGS from net-snmp-config this is because of wrong compiler options that it got from recipe-sysroot/usr/bin/crossscripts/net-snmp-config This patch tries to be specific about which options should be skimmed and removes the options completely Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2018-02-05net-snmp: fix the invalid -fdebug-prefix-mapYu Mingli
The previous path value to -fdebug-prefix-map is null which may result in other package such as quagga do_config error as below: ==================================================== add DISTRO_FEATURES_append = " snmp" to conf/local.conf test@buildserver@ bitbake quagga | checking for i586-poky-linux-net-snmp-config... no | checking for net-snmp-config... $Prj/tmp/work/i586-poky-linux/quagga/1.2.1-r0/recipe-sysroot/usr/bin/crossscripts/net-snmp-config | checking whether we can link to Net-SNMP... no | configure: error: --enable-snmp given but not usable | NOTE: The following config.log files may provide further information. | NOTE: $Prj/tmp/work/i586-poky-linux/quagga/1.2.1-r0/build/config.log | ERROR: configure failed | WARNING: $Prj/tmp/work/i586-poky-linux/quagga/1.2.1-r0/temp/run.do_configure.80493:1 exit 1 from 'exit 1' | ERROR: Function failed: do_configure (log file is located at $Prj/tmp/work/i586-poky-linux/quagga/1.2.1-r0/temp/log.do_configure.80493) ==================================================== Signed-off-by: Yu Mingli <mingli.yu@windriver.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2018-02-05net-snmp: remove U64 typedefSlater, Joseph
This allows us to build perl modules with recent versions of perl. Signed-off-by: Joe Slater <joe.slater@windriver.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2018-02-01recipes: use oe.utils.conditional instead of deprecated base_conditionalMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2018-01-08net-snmp: fix invalid paths in target net-snmp-configOvidiu Panait
Remove build host paths form target net-snmp-config. Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2018-01-08net-snmp: support openssl without 3desJackie Huang
net-snmp enables 3des support by default and fails to build with distro feature openssl-no-weak-ciphers: | ../../net-snmp-5.7.3/snmplib/scapi.c:82:25: fatal error: openssl/des.h: No such file or directory | #include <openssl/des.h> To fix the issue: * add a patch to include des.h only if it's found in openssl * disable des when openssl-no-weak-ciphers is enabled Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2017-10-11net-snmp: check that executable is used before testing for existanceBill Randle
The recipe for net-snmp has snmpd and snmptrapd in seperate packages, so one or the other or both could be installed. In a common case where only snmpd is installed, the startup script will fail to run because the snmptrapd executable does not exist. This patch simply qualifies the test by first checking to see if the executable is to be used. -Bill Signed-off-by: Bill Randle <bill.randle@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2017-09-12net-snmp: fix engineBoots value on SIGHUPLi Zhou
Store the incremented engineBoots value on SIGHUP. And don't reset engineBoots to 1 when oldEngineIDLength is 0. For the first run, the oldEngineIDLength is 0. When we say first run of the daemon, we talk about the first run ever on the machine, not only first run of every boot. Signed-off-by: Marian Florea <marian.florea@windriver.com> Reviewed-by: Wenkuan Wang <Wenkuan.Wang@windriver.com> Reviewed-by: Zhaolong Zhang <Zhaolong.Zhang@windriver.com> Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2017-06-28net-snmp: supported cross compile for the perl embedded and perl modulesWenlin Kang
The patch solves two issues: 1. Supported cross compile for the perl embedded and perl modules. 2. Solved runtime depend issue. Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2017-03-07Make use of the new bb.utils.filter() functionPeter Kjellerstedt
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-12-14net-snmp: snmplib, UDPIPv6 transport: Add a missing return statementLi Zhou
Backport a succeeding commit from net-snmp upstream to fix the issue introduced by commit <BUG#a2584: Fix snmptrap to use clientaddr from snmp.conf>. The missing return will cause crash when binding to a non-exist IPv6 address. Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14net-snmp: fix snmptrap to use clientaddr from snmp.conf.Li Zhou
Under IPv6 IP-multihomed environment, the socket does not bind to the clientaddr indicated in snmp.conf when sending snmptrap and it might choose a random one. Backport the patch from net-snmp upstream to fix it. Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-26net-snmp: Fix build issue found with muslKhem Raj
limits.h is needed for PATH_MAX and NAME_MAX Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-07-18net-snmp: initscripts are located in net-snmp-server-snmp packageLi Wang
The net-snmp-server package is a meta-package requiring net-snmp-server-snmpd and net-snmp-server-snmptrapd package. The net-snmp-server-snmpd package provides the startup scripts not the meta net-snmp-server package. Signed-off-by: Anders Wallin <anders.wallin@windriver.com> Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-07-18net-snmp: fix snmpd crash via AgentX connectionJackie Huang
backport a patch to fixed snmpd crashing when an AgentX subagent disconnect in the middle of processing of a request. Signed-off-by: Zhu Yanjun <yanjun.zhu@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-05meta-networking: use bb.utils.contains() instead of base_contains()Ross Burton
base_contains() is a compatibility wrapper and may warn in the future, so replace all instances with bb.utils.contains(). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-05net-snmp: enable ipv6 supportZhu Yanjun
Add packageconfig for ipv6 and enable it when it's defined in distro_features. Signed-off-by: Zhu Yanjun <yanjun.zhu@windriver.com> Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-04-01net-snmp: fix some invalid pathsCatalin Enache
Because the package is not built in place @srcdir@ is an absolute path to the source directory instead of ".". Because of this some target scripts like net-snmp-create-v3-user and net-snmp-config that are using thisvariable in their *.in files (NSC_SRCDIR=@srcdir@) contain invalid paths. Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-04-01net-snmp: fix invalid paths in target net-snmp-configCatalin Enache
Only net-snmp-config used for sysroot should have sysroot specific paths. Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-03-04recipes: Replace "cp -a" with "cp -R --no-dereference --preserve=mode,links"Martin Jansa
* Using "cp -a" leaks UID of user running the builds, causing many QA warnings. * See this thread for details: http://lists.openembedded.org/pipermail/openembedded-core/2015-November/112904.html Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-02-22net-snmp: fix cross-compile breakage, add libnl pkgconfig optionStephen Arnold
This patch enhances a previously unapplied patch on jethro, plus adds some flexibility in terms of required deps and a few cleanups. Signed-off-by: Stephen Arnold <stephen.arnold42@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05net-snmp: fix the replacement in net-snmp-configRoy Li
when net-snmp-config is used to configure by other package, and fail since /libnl3 is not found, in fact, it should be -I/usr/include/libnl3, and is modified as /libnl3 incorrectly. instead of modify the net-snmp-config for target, the one under ${bindir_crossscripts} should be replaced with ${TAGING_INCDIR} Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04net-snmp: apply patch for cross-compilationRafaël Carré
7fb5479 added the patch but did not apply it Rename patch to explicit it differentiate it from other patches Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04net-snmp: apply patch for cross-compilationRafaël Carré
7fb5479 added the patch but did not apply it Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30net-snmp: fix cross compilationRafaël Carré
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30net-snmp: Modify snmpd.serviceLi Xin
Add "-a" parameter in snmpd.service,it is needed to address logs. Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-10-21net-snmp: Fix build with gcc5Khem Raj
Fix errors seen with gcc5 Change-Id: I9c4361f3a9c25342f5c740263f551c162dce8faf Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-09-11net-snmp: upgrade 5.7.2.1 -> 5.7.3Li xin
* Dropped backported patches --ifmib.patch --0001-Added-checks-for-printing-variables-with-wrong-types.patch --0001-Fix-CVE-2014-2285.patch --net-snmp-5.7.2-fix-mib-timeout-values.patch * Update patches --dont-return-incompletely-parsed-varbinds.patch --systemd-support.patch * Add a new patch to avoid build Errors. --0001-config_os_headers-Error-Fix.patch Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-08-06net-snmp: fix mib representation of timeout valuesRoy Li
Fix mib representation of timeout values,correct conversion factor from microseconds to centiseconds. Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-07-16net-snmp: don't return incompletely parsed varbindsJian Liu
the snmp_pdu_parse() function could leave incompletely parsed varBind variables in the list of variables in case the parsing of the SNMP PDU failed. If later processing tries to operate on the stale and incompletely processed varBind (e.g. when printing the variables), this can lead to e.g. crashes or, possibly, execution of arbitrary code. The snmp_pdu_parse() function stores varBind variables in a list of netsnmp_variable_list structures. Each time the function parses a new varBind, a new netsnmp_variable_list item is allocated on the heap and linked to the list of variables. The problem is that this item is not removed from the list, even if snmp_pdu_parse() fails to complete the parsing. The "type" member of the stale netsnmp_variable_list is not properly initialized in case snmp_pdu_parse() returns early from the parsing. However, the "type" member is used to determine later code paths, which is why we see crashes in a variety of functions, although the root cause for all of these is the same. This patch come from http://sourceforge.net/p/net-snmp/code/ci/f23bcd3ac6ddee5d0a48f9703007ccc738914791/ Written-by: Robert Story Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-06-05meta-networking: standardize SECTION valuesJoe MacDonald
SECTION has been used inconsistently throughout the recipes in this layer. Convert them to all use the same convention. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-05-08net-snmp: fix CVE-2014-2285Junling Zheng
The perl_trapd_handler function in perl/TrapReceiver/TrapReceiver.xs in Net-SNMP 5.7.3.pre3 and earlier, when using certain Perl versions, allows remote attackers to cause a denial of service (snmptrapd crash) via an empty community string in an SNMP trap, which triggers a NULL pointer dereference within the newSVpv function in Perl. Refer to: https://bugzilla.redhat.com/show_bug.cgi?id=1072044 Signed-off-by: Junling Zheng <zhengjunling@huawei.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: add ptest packageJackie Huang
Issue: TA79430 - Change to use append for PACKAGES so that: * ptest package is added from ptest bbcalss * the PN is back, allow empty and add rdepends on net-snmp-client in case the user try to add net-snmp to the image - Add a patch to fix the output format for ptest - Add run-ptest - Add rdepends on perl for ptest (LOCAL REV: NOT UPSTREAM) -- Sent to meta-networking on 20150114 Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: move net-snmp-config to client packageJackie Huang
Since net-snmp-config is a common tool, move it from dev package to client package. Signed-off-by: yzhu1 <yanjun.zhu@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: init script fixesJackie Huang
Changes: 1. Add source function and status command. 2. make it possible to change the start arguments with a default file in the same way as debian. 3. change the default INITSCRIPT_PARAMS 4. Add PIDFILE and fix restart 5. remove the postrm sicne we use the one from update-rc.d Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: fix "libtool --finish"Jackie Huang
LIB_LDCONFIG_CMD failed since it is using a host dir $(libdir) which is /usr/lib64 does not exist on host when compile 64bit image. In fact, configuring dynamic linker run-time bindings is meaningless at this step, If it is needed, Poky would write ldconfig scripts to rpm-postinst for each recipe while do_package, in package.bbclass. Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: move persistent dir to /var/lib/net-snmpJackie Huang
Move persistent dir to /var/lib/net-snmp and fix security contexts for them. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: have mib-modules=smux enabledJackie Huang
According to the following commit, net-snmp needs to have mib-modules=smux enabled: commit f64db3011c04ada0a8ac04b9eddde05b67d21eec Author: Aws Ismail <aws.ismail@windriver.com> Date: Mon Mar 25 11:30:06 2013 -0400 Quagga has no snmp support, unrecognized options --enable-tcp-md5 1. Quagga's tcp-md5 has been renamed to linux24-tcp-md5 2. net-snmp needs to have mib-modules=smux enabled to enable quagga to support snmp. Make the net-snmp option dependent on the DISTRO_FEATURE snmp. 3. Misc: install the sample conf files for quagga. Also, Make sure that the post install script is being run on the target rather than during the rootfs creation stage. Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Aws Ismail <aws.ismail@windriver.com> Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-03-11net-snmp: add knob whether nlist.h are checkedChong.Lu@windriver.com
Previously, it still was checked when there was no nlish.h in sysroots directory. Add knob to decide whether nlist.h are checked or not. Fixed by using PACKAGECONFIG to check elf, with default disabled set. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-02-11snmpd: instead option -LS by -LsBian Naimeng
Option -LS does not work, we should instead it by -Ls as usage said. Deprecated options: -l FILE use -Lf <FILE> instead -P use -p instead -s use -Lsd instead -S d|i|0-7 use -Ls <facility> instead Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-11-04net-snmp: fix for Security Advisory - CVE-2014-3565Roy Li
snmplib/mib.c in net-snmp 5.7.0 and earlier, when the -OQ option is used, allows remote attackers to cause a denial of service (snmptrapd crash) via a crafted SNMP trap message, which triggers a conversion to the variable type designated in the MIB file, as demonstrated by a NULL type in an ifMtu trap message. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3565 Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-10-21net-snmp: add ac_cv_header_valgrind_* to CACHED_CONFIGUREVARSJackie Huang
There have been occasions that net-snmp sees valgrind and then later it's not available, adding this setting ensures determinism by disabling it by default Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2014-08-13net-snmp: uprev it to 5.7.2.1Roy Li
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-06-03net-snmp: install net-snmp-config script to STAGING_BINDIR_CROSSAlexandre Fournier
This recipe was installing net-snmp-config script to STAGING_BINDIR instead of STAGING_BINDIR_CROSS, during the do_install. It is not recommended and must be done after staging. Changes: * Remove STAGING_BINDIR manipulations from do_install_append * Add net_snmp_sysroot_preprocess function instead * Append net_snmp_sysroot_preprocess to SYSROOT_PREPROCESS_FUNCS Signed-off-by: Alexandre Fournier <alexandre.fournier@kiplink.fr> Signed-off-by: Joe MacDonald <joe@deserted.net>
2014-05-09net-snmp-5.7.2: fix CVE-2014-2285yzhu1
The perl_trapd_handler function in perl/TrapReceiver/TrapReceiver.xs in Net-SNMP 5.7.3.pre3 and earlier, when using certain Perl versions, allows remote attackers to cause a denial of service (snmptrapd crash) via an empty community string in an SNMP trap, which triggers a NULL pointer dereference within the newSVpv function in Perl. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-2285 Signed-off-by: yzhu1 <yanjun.zhu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Joe MacDonald <joe@deserted.net>
2014-05-09net-snmp-5.7.2: fix CVE-2014-2284yanjun.zhu
The Linux implementation of the ICMP-MIB in Net-SNMP 5.5 before 5.5.2.1, 5.6.x before 5.6.2.1, and 5.7.x before 5.7.2.1 does not properly validate input, which allows remote attackers to cause a denial of service via unspecified vectors. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-2284 Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Joe MacDonald <joe@deserted.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-09-23 19:35:37 +0000