aboutsummaryrefslogtreecommitdiffstats
path: root/meta-networking/recipes-connectivity/mosquitto
AgeCommit message (Collapse)Author
2020-09-03mosquitto: Upgrade 1.6.11 -> 1.6.12Leon Anavi
Upgrade to release 1.6.12: Security: - In some circumstances, Mosquitto could leak memory when handling PUBLISH messages. This is limited to incoming QoS 2 messages, and is related to the combination of the broker having persistence enabled, a clean session=false client, which was connected prior to the broker restarting, then has reconnected and has now sent messages at a sufficiently high rate that the incoming queue at the broker has filled up and hence messages are being dropped. This is more likely to have an effect where max_queued_messages is a small value. This has now been fixed. Broker: - Build warning fixes when building with WITH_BRIDGE=no and WITH_TLS=no. Clients: - All clients exit with an error exit code on CONNACK failure. - Don't busy loop with `mosquitto_pub -l` on a slow connection. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-08-17mosquitto: Upgrade 1.6.10 -> 1.6.11Leon Anavi
Upgrade to release 1.6.11: Broker: - Fix usage message only mentioning v3.1.1. - Fix broker refusing to start if only websockets listeners were defined. - Change systemd unit files to create /var/log/mosquitto before starting. - Don't quit with an error if opening the log file isn't possible. - Fix bridge topic remapping when using "" as the topic. - Fix messages being queued for disconnected bridges when clean start was set to true. - Fix `autosave_interval` not being triggered by messages being delivered. - Fix websockets clients sometimes not being disconnected promptly. - Fix "slow" file based logging by switching to line based buffering. - Log protocol error message where appropriate from a bad UNSUBSCRIBE, rather than the generic "socket error". - Don't try to start DLT logging if DLT unavailable, to avoid a long delay when shutting down the broker. - Fix potential memory leaks. - Fix clients not receiving messages after a previous client with the same client ID and positive will delay interval quit. - Fix overly broad HAVE_PTHREAD_CANCEL compile guard. Client library: - Improved documentation around connect callback return codes. - Fix `mosquitto_publish*()` no longer returning `MOSQ_ERR_NO_CONN` when not connected. - `mosquitto_loop_start()` now sets a thread name on Linux, FreeBSD, NetBSD, and OpenBSD. - Fix `mosquitto_loop_stop()` not stopping on Windows. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-06-08mosquitto: typo fixMartin Kelly
The "ssl" PACKAGECONFIG setting contains WITH_EC_OFF instead of WITH_EC=OFF, resulting in a build break when "ssl" is not set. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-06-08mosquitto: add native, nativesdk supportMartin Kelly
Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-05-31mosquitto: upgrade 1.6.9 -> 1.6.10Zang Ruochen
Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-03-08mosquitto: do not enable srv by defaultGianfranco Costamagna
Rationale can be found in the Debian packaging (debian/changelog): Revert change enabling SRV functionality, it is disabled by default upstream and of little benefit to any end user, but adds reasonable complexity to the code. Signed-off-by: Gianfranco Costamagna <costamagnagianfranco@yahoo.it> Signed-off-by: Gianfranco Costamagna <locutusofborg@debian.org> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-03-08mosquitto: refresh patches and sync with Debian packagingGianfranco Costamagna
Also add patch from debian to mqtt_protocol.h header file Signed-off-by: Gianfranco Costamagna <costamagnagianfranco@yahoo.it> Signed-off-by: Gianfranco Costamagna <locutusofborg@debian.org> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-03-02mosquitto: upgrade 1.6.8 -> 1.6.9Pierre-Jean Texier
Bugfix release. For details, see: https://mosquitto.org/blog/2020/02/version-1-6-9-released/ Also remove patches applied upstream. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2020-02-11mosquitto: Use mosquitto.init for daemon initMike Krupicka
Config file specification is missing in start) case. It is present already in restart) case. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-01-25mosquitto: apply upstream proposed patches to use cmake build system,Gianfranco Costamagna
simplifying a lot the build and install process. Signed-off-by: Gianfranco Costamagna <costamagnagianfranco@yahoo.it> Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com> Signed-off-by: Gianfranco Costamagna <locutusofborg@debian.org> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-12-15mosquitto: update to 1.6.8Leon Anavi
Bugfix release. For details, see: https://mosquitto.org/blog/2019/11/version-1-6-8-released/ Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-10-09mosquitto: update to 1.6.7Paul Eggleton
Bugfix release. For details, see: https://mosquitto.org/blog/2019/09/version-1-6-7-released/ Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-09-22mosquitto: update to 1.6.6Leon Anavi
Fix security vulnerabilities. For further details, see: https://mosquitto.org/blog/2019/09/version-1-6-6-released/ Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-09-16mosquitto: update to 1.6.5Paul Eggleton
A lot of changes upstream since the last upgrade, the highlights: * MQTT v5 protocol support * Performance improvements * New mosquitto_rr (request/response) client * TLS enhancements: OCSP stapling, TLS Engine support, explicit TLS v1.3 support, removed TLS v1.0 support For further details, see https://mosquitto.org/blog/ Additionally, SUMMARY and DESCRIPTION were tidied up as needed. Based upon an earlier upgrade patch by Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-03-17mosquitto: update to 1.5.8Oleksandr Kravchuk
Signed-off-by: Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-01-13meta-networking: remove True option to getVar calls (again)André Draszik
A couple have still been missed in the past despite multiple attempts at doing so (or simply have re-appeared?). Search & replace made using the following command: sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \ -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \ | cut -d':' -f1 \ | sort -u) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-12-05mosquitto: fully switch over to using PACKAGECONFIG_CONFARGSAndré Draszik
Convert all other instances of explicit PACKAGECONFIG uses to the PACKAGECONFIG_CONFARGS infrastructure. Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-12-05mosquitto: fix build in systemd environmentsAndré Draszik
The mosquitto systemd service file instructs systemd to wait for mosquitto to notify systemd that mosquitto has started correctly. This isn't working as mosquitto is not *compiled* with systemd support enabled. As such, systemd restarts mosquitto every few seconds. For reference, this was introduced in commit a483d344d9fb ("mosquitto: Make enabling systemd also enable build dep on systemd") Because we build mosquitto using the provided Makefile infrastructure, the solution is to add PACKAGECONFIG_CONFARGS to EXTRA_OEMAKE, so that the required make flags are added to the make command line. Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-11-26mosquitto: update to 1.5.4Paul Eggleton
1.5.2, 1.5.3 and 1.5.4 include a number of fixes, notably for vulnerability CVE-2018-12543 which allowed the server process to be remotely crashed. For further information see: https://mosquitto.org/blog/2018/11/version-154-released/ https://mosquitto.org/blog/2018/09/security-advisory-cve-2018-12543/ https://mosquitto.org/blog/2018/09/version-152-released/ A build option was added to use the system version of uthash rather than the bundled version so we no longer need the patch to do this. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-09-26mosquitto: make websockets a PACKAGECONFIG optionJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-09-08mosquitto: Make enabling systemd also enable build dep on systemdKhem Raj
systemd support in mqtt needs system developement headers and libs installed in recipe sysroot Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-09-04mosquitto: upgrade to 1.5.1Paul Eggleton
This includes one security fix and numerous other bugfixes. MQTT version 3.1.1 is now the default protocol. See the following for details: https://mosquitto.org/blog/2018/08/version-151-released/ https://mosquitto.org/blog/2018/05/version-1-5-released/ Changes to the recipe: * Drop explicit installation of the libmosquitto.a static library because this no longer gets built by default, and the normal "make install" which we are running will install it anyway if it were to be enabled. * Drop our service file since there is one supplied in the source tree * Enable systemd notify support when systemd is being used * Update comments in the init script Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-06-27mosquitto: minor recipe cleanupsAndre McCurdy
- Passing prefix, mandir and localedir via the Make command line allows patching of config.mk to be dropped. - The variable PREFIX isn't used anywhere in the mosquitto 1.4.15 Makefiles, so doesn't need to be passed on the Make command line. That means the default do_compile() from base.bbclass can be used and the recipe specific do_compile() can be dropped. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-06-05mosquitto: add default configuration fileNicola Lunghi
the mosquitto recipe doesn't add a mosquitto configuration file add it from the mosquitto.conf.example file Signed-off-by: Nicola Lunghi <nicola.lunghi@jci.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-06-05mosquitto: add mosquitto-examples packageNicola Lunghi
the mosquitto install populate some .example files in /etc/mosquitto. move thise example files in a separate package The PACKAGE_BEFORE_PN is needed because otherwise those examples end in the base mosquitto package Signed-off-by: Nicola Lunghi <nicola.lunghi@jci.com> Acked-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-05-31mosquitto: upgrade to 1.4.15Paul Eggleton
Security update - fixes CVE-2017-7651 and CVE-2017-7652, as well as a number of other non-security issues. For more details see the release announcement: https://mosquitto.org/blog/2018/02/security-advisory-cve-2017-7651-cve-2017-7652/ Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-05-17mosquito: move from oe to networking layerArmin Kuster
mosquito has dependancy on meta-netowrking packages Signed-off-by: Armin Kuster <akuster808@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-09-24 19:41:23 +0000