diff options
Diffstat (limited to 'meta-oe/recipes-extended/smartmontools')
-rwxr-xr-x | meta-oe/recipes-extended/smartmontools/files/initd.smartd | 108 | ||||
-rw-r--r-- | meta-oe/recipes-extended/smartmontools/smartmontools_6.2.bb | 14 |
2 files changed, 120 insertions, 2 deletions
diff --git a/meta-oe/recipes-extended/smartmontools/files/initd.smartd b/meta-oe/recipes-extended/smartmontools/files/initd.smartd new file mode 100755 index 0000000000..29c27e4756 --- /dev/null +++ b/meta-oe/recipes-extended/smartmontools/files/initd.smartd @@ -0,0 +1,108 @@ +#! /bin/sh + +# smartmontools init file for smartd +# Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net> +# $Id: smartd.initd.in 3360 2011-06-06 19:25:36Z chrfranke $ + +# For RedHat and cousins: +# chkconfig: - 60 60 +# description: Self Monitoring and Reporting Technology (SMART) Daemon +# processname: smartd + +# For SuSE and cousins +### BEGIN INIT INFO +# Provides: smartd +# Required-Start: $syslog $remote_fs +# Should-Start: sendmail +# Required-Stop: $syslog $remote_fs +# Should-Stop: sendmail +# Default-Start: +# Default-Stop: 0 1 2 3 4 5 6 +# Short-Description: Monitors disk and tape health via S.M.A.R.T. +# Description: Start S.M.A.R.T. disk and tape monitor. +### END INIT INFO + +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2, or (at your option) any later +# version. +# You should have received a copy of the GNU General Public License (for +# example COPYING); if not, write to the Free Software Foundation, Inc., 675 +# Mass Ave, Cambridge, MA 02139, USA. +# This code was originally developed as a Senior Thesis by Michael Cornwell +# at the Concurrent Systems Laboratory (now part of the Storage Systems +# Research Center), Jack Baskin School of Engineering, University of +# California, Santa Cruz. http://ssrc.soe.ucsc.edu/. + +# Uncomment the line below to pass options to smartd on startup. +# Note that distribution specific configuration files like +# /etc/{default,sysconfig}/smartmontools might override these +#smartd_opts="--interval=1800" + +SMARTD_BIN=/usr/sbin/smartd +SMARTDPID=/var/run/smartd.pid +[ -x $SMARTD_BIN ] || exit 0 +RET=0 + +# source configuration file +[ -r /etc/default/rcS ] && . /etc/default/rcS +[ -r /etc/default/smartmontools ] && . /etc/default/smartmontools + +smartd_opts="--pidfile $SMARTDPID $smartd_opts" + +case "$1" in + start) + echo -n "Starting S.M.A.R.T. daemon: smartd" + if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ + --exec $SMARTD_BIN -- $smartd_opts; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + stop) + echo -n "Stopping S.M.A.R.T. daemon: smartd" + start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID + echo "." + ;; + restart) + $0 stop + $0 start + ;; + force-reload) + $0 reload || $0 restart + ;; + reload) + echo -n "Reload S.M.A.R.T. daemon: smartd" + if start-stop-daemon --stop --quiet --signal 1 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + report) + echo -n "Checking SMART devices now" + if start-stop-daemon --stop --quiet --signal 10 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + status) + if pidof $SMARTD_BIN >/dev/null; then + echo "$SMARTD_BIN is running." + else + echo "$SMARTD_BIN is not running." + RET=1 + fi + ;; + *) + echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}" + exit 1 +esac +exit $RET diff --git a/meta-oe/recipes-extended/smartmontools/smartmontools_6.2.bb b/meta-oe/recipes-extended/smartmontools/smartmontools_6.2.bb index 83ff028845..66fdb4d8d8 100644 --- a/meta-oe/recipes-extended/smartmontools/smartmontools_6.2.bb +++ b/meta-oe/recipes-extended/smartmontools/smartmontools_6.2.bb @@ -12,10 +12,20 @@ SECTION = "console/utils" LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" -SRC_URI = "${SOURCEFORGE_MIRROR}/smartmontools/smartmontools-${PV}.tar.gz" +SRC_URI = "${SOURCEFORGE_MIRROR}/smartmontools/smartmontools-${PV}.tar.gz \ + file://initd.smartd \ + " SRC_URI[md5sum] = "d44f84081a12cef79cd17f78044351fc" SRC_URI[sha256sum] = "486f660579bb0fb4f6b927ded7531cb1f99685c666397377761c5b04dd96065b" -inherit autotools +inherit autotools update-rc.d +do_install_append () { + #install the init.d/smartd + install -d ${D}${sysconfdir}/init.d + install -p -m 0755 ${WORKDIR}/initd.smartd ${D}${sysconfdir}/init.d/smartd +} + +INITSCRIPT_NAME = "smartd" +INITSCRIPT_PARAMS = "start 60 . stop 60 0 1 2 3 4 5 6 ." |