1 files changed, 0 insertions, 178 deletions
diff --git a/meta-oe/recipes-benchmark/iperf/iperf-2.0.4/003-fix-hyphen-used-as-minus-sign.patch b/meta-oe/recipes-benchmark/iperf/iperf-2.0.4/003-fix-hyphen-used-as-minus-sign.patch
deleted file mode 100644
index 929b5ac8d5..0000000000
--- a/meta-oe/recipes-benchmark/iperf/iperf-2.0.4/003-fix-hyphen-used-as-minus-sign.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-Import Debian patches and fix a lot of real bugs. 
-
-Upstream-Status: Inappropriate [not author. Above message was get from oe.dev c10c33f86903c93611023197a7f812459c2dfe2d]
-
---- iperf-2.0.4.orig/man/iperf.1	2008-08-21 00:21:49.290527643 +0200
-+++ iperf-2.0.4/man/iperf.1	2008-08-21 00:35:17.850640445 +0200
-@@ -2,21 +2,21 @@
- .SH NAME
- iperf \- perform network throughput tests
- .SH SYNOPSIS
--.B iperf -s [
-+.B iperf \-s [
- .I options
- .B ]
- 
--.B iperf -c 
-+.B iperf \-c 
- .I server
- .B [
- .I options
- .B ]
- 
--.B iperf -u -s [
-+.B iperf \-u \-s [
- .I options
- .B ]
- 
--.B iperf -u -c 
-+.B iperf \-u \-c 
- .I server
- .B [
- .I options
-@@ -28,103 +28,103 @@
- traffic).  
- .SH "GENERAL OPTIONS"
- .TP
--.BR -f ", " --format " "
-+.BR \-f ", " \-\-format " "
- [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes
- .TP
--.BR -h ", " --help " "
-+.BR \-h ", " \-\-help " "
- print a help synopsis
- .TP
--.BR -i ", " --interval " \fIn\fR"
-+.BR \-i ", " \-\-interval " \fIn\fR"
- pause \fIn\fR seconds between periodic bandwidth reports
- .TP
--.BR -l ", " --len " \fIn\fR[KM]"
-+.BR \-l ", " \-\-len " \fIn\fR[KM]"
- set length read/write buffer to \fIn\fR (default 8 KB)
- .TP
--.BR -m ", " --print_mss " "
-+.BR \-m ", " \-\-print_mss " "
- print TCP maximum segment size (MTU - TCP/IP header)
- .TP
--.BR -o ", " --output " <filename>"
-+.BR \-o ", " \-\-output " <filename>"
- output the report or error message to this specified file
- .TP
--.BR -p ", " --port " \fIn\fR"
-+.BR \-p ", " \-\-port " \fIn\fR"
- set server port to listen on/connect to to \fIn\fR (default 5001)
- .TP
--.BR -u ", " --udp " "
-+.BR \-u ", " \-\-udp " "
- use UDP rather than TCP
- .TP
--.BR -w ", " --window " \fIn\fR[KM]"
-+.BR \-w ", " \-\-window " \fIn\fR[KM]"
- TCP window size (socket buffer size)
- .TP
--.BR -B ", " --bind " <host>"
-+.BR \-B ", " \-\-bind " <host>"
- bind to <host>, an interface or multicast address
- .TP
--.BR -C ", " --compatibility " "
-+.BR \-C ", " \-\-compatibility " "
- for use with older versions does not sent extra msgs
- .TP
--.BR -M ", " --mss " \fIn\fR"
-+.BR \-M ", " \-\-mss " \fIn\fR"
- set TCP maximum segment size (MTU - 40 bytes)
- .TP
--.BR -N ", " --nodelay " "
-+.BR \-N ", " \-\-nodelay " "
- set TCP no delay, disabling Nagle's Algorithm
- .TP
--.BR -v ", " --version " "
-+.BR \-v ", " \-\-version " "
- print version information and quit
- .TP
--.BR -V ", " --IPv6Version " "
-+.BR \-V ", " \-\-IPv6Version " "
- Set the domain to IPv6
- .TP
--.BR -x ", " --reportexclude " "
-+.BR \-x ", " \-\-reportexclude " "
- [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings) V(server) reports
- .TP
--.BR -y ", " --reportstyle " C|c"
-+.BR \-y ", " \-\-reportstyle " C|c"
- if set to C or c report results as CSV (comma separated values)
- .SH "SERVER SPECIFIC OPTIONS"
- .TP
--.BR -s ", " --server " "
-+.BR \-s ", " \-\-server " "
- run in server mode
- .TP
--.BR -U ", " --single_udp " "
-+.BR \-U ", " \-\-single_udp " "
- run in single threaded UDP mode
- .TP
--.BR -D ", " --daemon " "
-+.BR \-D ", " \-\-daemon " "
- run the server as a daemon
- .SH "CLIENT SPECIFIC OPTIONS"
- .TP
--.BR -b ", " --bandwidth " \fIn\fR[KM]"
-+.BR \-b ", " \-\-bandwidth " \fIn\fR[KM]"
- set target bandwidth to \fIn\fR bits/sec (default 1 Mbit/sec).
--This setting requires UDP (-u).
-+This setting requires UDP (\-u).
- .TP
--.BR -c ", " --client " <host>"
-+.BR \-c ", " \-\-client " <host>"
- run in client mode, connecting to <host>
- .TP
--.BR -d ", " --dualtest " "
-+.BR \-d ", " \-\-dualtest " "
- Do a bidirectional test simultaneously
- .TP
--.BR -n ", " --num " \fIn\fR[KM]"
--number of bytes to transmit (instead of -t)
-+.BR \-n ", " \-\-num " \fIn\fR[KM]"
-+number of bytes to transmit (instead of \-t)
- .TP
--.BR -r ", " --tradeoff " "
-+.BR \-r ", " \-\-tradeoff " "
- Do a bidirectional test individually
- .TP
--.BR -t ", " --time " \fIn\fR"
-+.BR \-t ", " \-\-time " \fIn\fR"
- time in seconds to transmit for (default 10 secs)
- .TP
--.BR -F ", " --fileinput " <name>"
-+.BR \-F ", " \-\-fileinput " <name>"
- input the data to be transmitted from a file
- .TP
--.BR -I ", " --stdin " "
-+.BR \-I ", " \-\-stdin " "
- input the data to be transmitted from stdin
- .TP
--.BR -L ", " --listenport " \fIn\fR"
-+.BR \-L ", " \-\-listenport " \fIn\fR"
- port to recieve bidirectional tests back on
- .TP
--.BR -P ", " --parallel " \fIn\fR"
-+.BR \-P ", " \-\-parallel " \fIn\fR"
- number of parallel client threads to run
- .TP
--.BR -T ", " --ttl " \fIn\fR"
-+.BR \-T ", " \-\-ttl " \fIn\fR"
- time-to-live, for multicast (default 1)
- .TP
--.BR -Z ", " --linux-congestion " <algo>"
-+.BR \-Z ", " \-\-linux\-congestion " <algo>"
- set TCP congestion control algorithm (Linux only)
- .SH ENVIRONMENT
- .TP
-@@ -143,6 +143,6 @@
- Kevin Gibbs,
- John Estabrook <jestabro at ncsa.uiuc.edu>,
- Andrew Gallatin <gallatin at gmail.com>,
--Stephen Hemminger <shemminger at linux-foundation.org>
-+Stephen Hemminger <shemminger at linux\-foundation.org>
- .SH "SEE ALSO"
- http://iperf.sourceforge.net/