iscsi-initiator-utils: add recipe file

The package provides the server daemon for the iSCSI protocol, as
well as the utility programs used to manage it. iSCSI is a protocol
for distributed disk access using SCSI commands sent over Internet
Protocol networks

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

8 files changed, 524 insertions, 0 deletions

diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/99_iscsi-initiator-utils b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/99_iscsi-initiator-utils
new file mode 100644
index 00000000000..42fdd602f94
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/99_iscsi-initiator-utils
@@ -0,0 +1,2 @@
+# <type> <owner> <group> <mode> <path> <linksource>
+d root root 0755 /var/lock/iscsi none
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/initd.debian b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/initd.debian
new file mode 100644
index 00000000000..99a76386119
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/initd.debian
@@ -0,0 +1,119 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:
+# Required-Start:
+# Required-Stop:
+# Default-Start:
+# Default-Stop:
+# Short-Description: Starts and stops the iSCSI initiator services and logins to default targets
+### END INIT INFO
+#set -x
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/iscsid
+ADM=/usr/sbin/iscsiadm
+PIDFILE=/var/run/iscsid.pid
+
+[ -x "$DAEMON" ] || exit 0
+
+if [ ! -d /sys/class/ ]; then
+  echo "Failure:" "iSCSI requires a mounted sysfs, not started."
+  exit 1
+fi
+
+nodestartup_re='s/^node\.conn\[0]\.startup[ 	]*=[ 	]*//p'
+
+RETVAL=0
+
+start() {
+	echo "Starting iSCSI initiator service" "iscsid"
+	modprobe -q iscsi_tcp 2>/dev/null || :
+	modprobe -q ib_iser 2>/dev/null || :
+	if [ ! -f /etc/iscsi/initiatorname.iscsi ]; then
+		INITIATORNAME=$(iscsi-iname)
+		cat >/etc/iscsi/initiatorname.iscsi <<EOF
+## DO NOT EDIT OR REMOVE THIS FILE!
+## If you remove this file, the iSCSI daemon will not start.
+## If you change the InitiatorName, existing access control lists
+## may reject this initiator.  The InitiatorName must be unique
+## for each iSCSI initiator.  Do NOT duplicate iSCSI InitiatorNames.
+InitiatorName=$INITIATORNAME
+EOF
+	fi
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON
+	RETVAL=$?
+	starttargets
+}
+
+starttargets() {
+	echo "Setting up iSCSI targets"
+	$ADM -m node --loginall=automatic
+}
+
+stoptargets() {
+	echo "Disconnecting iSCSI targets"
+	sync
+	$ADM -m node --logoutall=all
+	RETVAL=$?
+	#if RETVAL is 21, means no active sessions, consider ok
+	if [ "$RETVAL" = "21" ]; then
+		RETVAL=0
+	fi
+}
+
+stop() {
+	stoptargets
+	if [ $RETVAL -ne 0 ]; then
+		echo "Failure:" "Could not stop all targets, try again later"
+		return $RETVAL
+	fi
+
+	echo "Stopping iSCSI initiator service"
+	start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
+	rm -f $PIDFILE
+	status=0
+	modprobe -r ib_iser 2>/dev/null
+	if [ "$?" -ne "0" -a "$?" -ne "1" ]; then
+		status=1
+	fi
+	modprobe -r iscsi_tcp 2>/dev/null
+	if [ "$?" -ne "0" -a "$?" -ne "1" ]; then
+		status=1
+	fi
+}
+
+restart() {
+	stop
+	if [ $RETVAL -ne 0 ]; then
+		echo "Failure:" "Stopping iSCSI initiator service failed, not starting"
+		return $RETVAL
+	fi
+	start
+}
+
+restarttargets() {
+	stoptargets
+	if [ $RETVAL -ne 0 ]; then
+		echo "Failure:" "Could not stop all targets, try again later"
+		return $RETVAL
+	fi
+	starttargets
+}
+
+status() {
+	#XXX FIXME: what to do here?
+	#status iscsid
+	# list active sessions
+	echo Current active iSCSI sessions:
+	$ADM -m session
+}
+
+case "$1" in
+	start|starttargets|stop|stoptargets|restart|restarttargets|status)
+		$1
+		;;
+	*)
+		echo "Usage: $0 {start|stop|restart|status}"
+		exit 1
+		;;
+esac
+exit $RETVAL
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator
new file mode 100644
index 00000000000..7fa49a2d603
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator
@@ -0,0 +1,4 @@
+# default command line settings for open-iscsi's iscsid
+
+OPTS_ISCSID=""
+OPTS_ISCSIADM=""
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-targets.service b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-targets.service
new file mode 100644
index 00000000000..564b2d21d58
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-targets.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=Open-iSCSI initiator (i.e. client) target bindings
+After=iscsi-initiator.service
+Requires=iscsi-initiator.service
+
+[Service]
+Type=oneshot
+EnvironmentFile=/etc/default/iscsi-initiator
+ExecStart=/usr/sbin/iscsiadm -m node --loginall=automatic $OPTS_ISCSIADM
+ExecStop=/usr/sbin/iscsiadm -m node --logoutall=all $OPTS_ISCSIADM
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch
new file mode 100644
index 00000000000..ce48e2bb396
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch
@@ -0,0 +1,21 @@
+iscsi-initiator-utils not to use static
+
+Upstream-status: Backport
+This patch is from fedora17.
+
+Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
+Signed-off-by: Vu Tran <vu.tran@windriver.com>
+
+diff --git a/usr/Makefile b/usr/Makefile
+index 673b7f1..fd14a10 100644
+--- a/usr/Makefile
++++ b/usr/Makefile
+@@ -61,7 +61,7 @@ iscsiadm: $(ISCSI_LIB_SRCS) $(DISCOVERY_SRCS) iscsiadm.o session_mgmt.o
+ 
+ iscsistart: $(ISCSI_LIB_SRCS) $(INITIATOR_SRCS) $(FW_BOOT_SRCS) \
+ 		iscsistart.o statics.o
+-	$(CC) $(CFLAGS) -static $^ -o $@
++	$(CC) $(CFLAGS) $^ -o $@
+ clean:
+ 	rm -f *.o $(PROGRAMS) .depend $(LIBSYS)
+ 
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch
new file mode 100644
index 00000000000..50227a77482
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch
@@ -0,0 +1,240 @@
+iscsi-initiator-utils to use var for config
+
+Upstream-status: Backport
+This patch is from fedora.
+
+Use /var/lib/iscsi/ instead of /etc/iscsi/ for holding
+state files.
+
+Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
+Signed-off-by: Vu Tran <vu.tran@windriver.com>
+
+diff --git a/README b/README
+index 7364b2d..5e8bff8 100644
+--- a/README
++++ b/README
+@@ -164,10 +164,10 @@ available on all Linux installations.
+ 
+ The database contains two tables:
+ 
+-- Discovery table (/etc/iscsi/send_targets);
+-- Node table (/etc/iscsi/nodes).
++- Discovery table (/var/lib/iscsi/send_targets);
++- Node table (/var/lib/iscsi/nodes).
+ 
+-The regular place for iSCSI database files: /etc/iscsi/nodes
++The regular place for iSCSI database files: /var/lib/iscsi/nodes
+ 
+ The iscsiadm utility is a command-line tool to manage (update, delete,
+ insert, query) the persistent database.
+@@ -444,7 +444,7 @@ a scsi_host per HBA port).
+ To manage both types of initiator stacks, iscsiadm uses the interface (iface)
+ structure. For each HBA port or for software iscsi for each network
+ device (ethX) or NIC, that you wish to bind sessions to you must create
+-a iface config /etc/iscsi/ifaces.
++a iface config /var/lib/iscsi/ifaces.
+ 
+ Prep:
+ 
+@@ -478,29 +478,29 @@ Running:
+ iface0 qla4xxx,00:c0:dd:08:63:e8,20.15.0.7,default,iqn.2005-06.com.redhat:madmax
+ iface1 qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,default,iqn.2005-06.com.redhat:madmax
+ 
+-Will report iface configurations that are setup in /etc/iscsi/ifaces.
++Will report iface configurations that are setup in /var/lib/iscsi/ifaces.
+ The format is:
+ 
+ iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname
+ 
+ For software iscsi, you can create the iface configs by hand, but it is
+ reccomended that you use iscsiadm's iface mode. There is a iface.example in
+-/etc/iscsi/ifaces which can be used as a template for the daring.
++/var/lib/iscsi/ifaces which can be used as a template for the daring.
+ 
+ For each network object you wish to bind a session to you must create
+-a seperate iface config in /etc/iscsi/ifaces and each iface config file
++a seperate iface config in /var/lib/iscsi/ifaces and each iface config file
+ must have a unique name which is less than or equal to 64 characters.
+ 
+ Example:
+ 
+ If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with
+ MAC address 00:C0:DD:08:63:E7 and you wanted to do software iscsi over
+-TCP/IP. Then in /etc/iscsi/ifaces/iface0 you would enter:
++TCP/IP. Then in /var/lib/iscsi/ifaces/iface0 you would enter:
+ 
+ iface.transport_name = tcp
+ iface.hwaddress = 00:0F:1F:92:6B:BF
+ 
+-and in /etc/iscsi/ifaces/iface1 you would enter:
++and in /var/lib/iscsi/ifaces/iface1 you would enter:
+ 
+ iface.transport_name = tcp
+ iface.hwaddress = 00:C0:DD:08:63:E7
+@@ -550,7 +550,7 @@ cxgb3i.00:07:43:05:97:07 cxgb3i,00:07:43:05:97:07,<empty>,<empty>,<empty>
+ qla4xxx.00:0e:1e:04:8b:2e qla4xxx,00:0e:1e:04:8b:2e,<empty>,<empty>,<empty>
+ 
+ 
+-Will report iface configurations that are setup in /etc/iscsi/ifaces.
++Will report iface configurations that are setup in /var/lib/iscsi/ifaces.
+ The format is:
+ 
+ iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname
+@@ -636,7 +636,7 @@ need a seperate network connection to the target for discovery purposes.
+ *This will be fixed in the next version of open-iscsi*
+ 
+ For compatibility reasons, when you run iscsiadm to do discovery, it
+-will check for interfaces in /etc/iscsi/iscsi/ifaces that are using
++will check for interfaces in /var/lib/iscsi/iscsi/ifaces that are using
+ tcp for the iface.transport and it will bind the portals that are discovered
+ so that they will be logged in through those ifaces. This behavior can also
+ be overriden by passing in the interfaces you want to use. For the case
+@@ -654,7 +654,7 @@ we do not bind a session to a iface, then you can use the special iface
+ 
+ iscsiadm -m discoverydb -t st -p ip:port -I default --discover -P 1
+ 
+-And if you did not define any interfaces in /etc/iscsi/ifaces and do
++And if you did not define any interfaces in /var/lib/iscsi/ifaces and do
+ not pass anything into iscsiadm, running iscsiadm will do the default
+ behavior, where we allow the network subsystem to decide which
+ device to use.
+@@ -696,7 +696,7 @@ To now log into targets it is the same as with sofware iscsi. See section
+ 
+ 	    ./iscsiadm -m discoverydb -t st -p 192.168.1.1:3260 --discover
+ 
+-	This will search /etc/iscsi/send_targets for a record with the
++	This will search /var/lib/iscsi/send_targets for a record with the
+ 	ID [portal = 192.168.1.1:3260 and type = sendtargets. If found it
+ 	will perform discovery using the settings stored in the record.
+ 	If a record does not exist, it will be created using the iscsid.conf
+@@ -705,7 +705,7 @@ To now log into targets it is the same as with sofware iscsi. See section
+ 	The argument to -p may also be a hostname instead of an address.
+ 	    ./iscsiadm -m discoverydb -t st -p smoehost --discover
+ 
+-	For the ifaces, iscsiadm will first search /etc/iscsi/ifaces for
++	For the ifaces, iscsiadm will first search /var/lib/iscsi/ifaces for
+ 	interfaces using software iscsi. If any are found then nodes found
+ 	during discovery will be setup so that they can logged in through
+ 	those interfaces. To specify a specific iface, pass the
+@@ -761,7 +761,7 @@ To now log into targets it is the same as with sofware iscsi. See section
+ 	This command will perform discovery, but not manipulate the node DB.
+ 
+   - SendTargets iSCSI Discovery with a specific interface. If you
+-	wish to only use a subset of the interfaces in /etc/iscsi/ifaces
++	wish to only use a subset of the interfaces in /var/lib/iscsi/ifaces
+ 	then you can pass them in during discovery:
+ 
+ 	     ./iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
+@@ -1072,8 +1072,8 @@ where targetname is the name of the target and ip_address:port is the address
+ and port of the portal. tpgt, is the portal group tag of
+ the portal, and is not used in iscsiadm commands except for static
+ record creation. And iface name is the name of the iscsi interface
+-defined in /etc/iscsi/ifaces. If no interface was defined in
+-/etc/iscsi/ifaces or passed in, the default behavior is used.
++defined in /var/lib/iscsi/ifaces. If no interface was defined in
++/var/lib/iscsi/ifaces or passed in, the default behavior is used.
+ Default here is iscsi_tcp/tcp to be used over which ever NIC the
+ network layer decides is best.
+ 
+@@ -1188,7 +1188,7 @@ If set, iscsid will perform discovery to the address every
+ discovery.isns.discoveryd_poll_inval or
+ discovery.sendtargets.discoveryd_poll_inval seconds,
+ and it will log into any portals found from the discovery source using
+-the ifaces in /etc/iscsi/ifaces.
++the ifaces in /var/lib/iscsi/ifaces.
+ 
+ Note that for iSNS the poll_interval does not have to be set. If not set,
+ iscsid will only perform rediscovery when it gets a SCN from the server.
+diff --git a/doc/iscsiadm.8 b/doc/iscsiadm.8
+index 7c209f6..e94cca0 100644
+--- a/doc/iscsiadm.8
++++ b/doc/iscsiadm.8
+@@ -89,7 +89,7 @@ This option is only valid for ping submode.
+ .TP
+ \fB\-I\fR, \fB\-\-interface=\fI[iface]\fR
+ The interface argument specifies the iSCSI interface to use for the operation.
+-iSCSI interfaces (iface) are defined in /etc/iscsi/ifaces. For hardware
++iSCSI interfaces (iface) are defined in /var/lib/iscsi/ifaces. For hardware
+ iSCSI (qla4xxx) the iface config must have the hardware address
+ (iface.hwaddress = port's MAC address)
+ and the driver/transport_name (iface.transport_name). The iface's name is
+@@ -166,7 +166,7 @@ If no other options are specified: for \fIdiscoverydb\fR and \fInode\fR, all
+ of their respective records are displayed; for \fIsession\fR, all active
+ sessions and connections are displayed; for \fIfw\fR, all boot firmware
+ values are displayed; for \fIhost\fR, all iSCSI hosts are displayed; and
+-for \fIiface\fR, all ifaces setup in /etc/iscsi/ifaces are displayed.
++for \fIiface\fR, all ifaces setup in /var/lib/iscsi/ifaces are displayed.
+ 
+ .TP
+ \fB\-n\fR, \fB\-\-name=\fIname\fR
+@@ -535,10 +535,10 @@ The configuration file read by \fBiscsid\fR and \fBiscsiadm\fR on startup.
+ The file containing the iSCSI InitiatorName and InitiatorAlias read by
+ \fBiscsid\fR and \fBiscsiadm\fR on startup.
+ .TP
+-/etc/iscsi/nodes/
++/var/lib/iscsi/nodes/
+ This directory contains the nodes with their targets.
+ .TP
+-/etc/iscsi/send_targets
++/var/lib/iscsi/send_targets
+ This directory contains the portals.
+ 
+ .SH "SEE ALSO"
+diff --git a/usr/idbm.c b/usr/idbm.c
+index 4d30aa9..316e54f 100644
+--- a/usr/idbm.c
++++ b/usr/idbm.c
+@@ -2468,9 +2468,9 @@ free_info:
+ int idbm_init(idbm_get_config_file_fn *fn)
+ {
+ 	/* make sure root db dir is there */
+-	if (access(ISCSI_CONFIG_ROOT, F_OK) != 0) {
+-		if (mkdir(ISCSI_CONFIG_ROOT, 0660) != 0) {
+-			log_error("Could not make %s %d\n", ISCSI_CONFIG_ROOT,
++	if (access(ISCSIVAR, F_OK) != 0) {
++		if (mkdir(ISCSIVAR, 0660) != 0) {
++			log_error("Could not make %s %d\n", ISCSIVAR,
+ 				   errno);
+ 			return errno;
+ 		}
+diff --git a/usr/idbm.h b/usr/idbm.h
+index 245f046..f45e86e 100644
+--- a/usr/idbm.h
++++ b/usr/idbm.h
+@@ -28,12 +28,16 @@
+ #include "config.h"
+ #include "list.h"
+ 
+-#define NODE_CONFIG_DIR		ISCSI_CONFIG_ROOT"nodes"
+-#define SLP_CONFIG_DIR		ISCSI_CONFIG_ROOT"slp"
+-#define ISNS_CONFIG_DIR		ISCSI_CONFIG_ROOT"isns"
+-#define STATIC_CONFIG_DIR	ISCSI_CONFIG_ROOT"static"
+-#define FW_CONFIG_DIR		ISCSI_CONFIG_ROOT"fw"
+-#define ST_CONFIG_DIR		ISCSI_CONFIG_ROOT"send_targets"
++#define ISCSIVAR			"/var/lib/iscsi/"
++
++#define NODE_CONFIG_DIR    ISCSIVAR"nodes"
++#define SLP_CONFIG_DIR     ISCSIVAR"slp"
++#define ISNS_CONFIG_DIR    ISCSIVAR"isns"
++#define STATIC_CONFIG_DIR  ISCSIVAR"static"
++#define FW_CONFIG_DIR      ISCSIVAR"fw"
++#define ST_CONFIG_DIR      ISCSIVAR"send_targets"
++
++
+ #define ST_CONFIG_NAME		"st_config"
+ #define ISNS_CONFIG_NAME	"isns_config"
+ 
+diff --git a/usr/iface.h b/usr/iface.h
+index 01f7074..2c6ef72 100644
+--- a/usr/iface.h
++++ b/usr/iface.h
+@@ -20,7 +20,8 @@
+ #ifndef ISCSI_IFACE_H
+ #define ISCSI_IFACE_H
+ 
+-#define IFACE_CONFIG_DIR	ISCSI_CONFIG_ROOT"ifaces"
++#include "idbm.h"
++#define IFACE_CONFIG_DIR	ISCSIVAR"ifaces"
+ 
+ struct iface_rec;
+ struct list_head;
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator.service b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator.service
new file mode 100644
index 00000000000..b1397513bb8
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Open-iSCSI initiator (i.e. client) service
+After=syslog.target
+
+[Service]
+EnvironmentFile=/etc/default/iscsi-initiator
+ExecStartPre=/sbin/modprobe iscsi_tcp
+ExecStart=/usr/sbin/iscsid -f $OPTS_ISCSID
+
+[Install]
+WantedBy=multi-user.target
+
diff --git a/meta-networking/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb b/meta-networking/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb
new file mode 100644
index 00000000000..d48cf24eb66
--- /dev/null
+++ b/meta-networking/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb
@@ -0,0 +1,111 @@
+SUMMARY = "iSCSI daemon and utility programs"
+DESCRIPTION = "Open-iSCSI project is a high performance, transport \
+independent, multi-platform implementation of RFC3720. The iscsi package \
+provides the server daemon for the iSCSI protocol, as well as the utility \
+programs used to manage it. iSCSI is a protocol for distributed \
+disk access using SCSI commands sent over Internet Protocol networks."
+HOMEPAGE = "http://www.open-iscsi.org/"
+LICENSE = "GPLv2 & LGPLv2.1"
+SECTION = "console/network"
+DEPENDS = "openssl flex-native bison-native"
+
+LIC_FILES_CHKSUM = \
+        "file://COPYING;md5=393a5ca445f6965873eca0259a17f833 \
+         file://utils/open-isns/COPYING;md5=7fbc338309ac38fefcd64b04bb903e34"
+
+SRC_URI = "http://www.open-iscsi.org/bits/open-iscsi-${PV}.tar.gz \
+           file://iscsi-initiator-utils-use-var-for-config.patch \
+           file://iscsi-initiator-utils-dont-use-static.patch \
+           file://initd.debian \
+           file://99_iscsi-initiator-utils \
+           file://iscsi-initiator \
+           file://iscsi-initiator.service \
+           file://iscsi-initiator-targets.service \
+"
+SRC_URI[md5sum] = "8b8316d7c9469149a6cc6234478347f7"
+SRC_URI[sha256sum] = "7dd9f2f97da417560349a8da44ea4fcfe98bfd5ef284240a2cc4ff8e88ac7cd9"
+
+S = "${WORKDIR}/open-iscsi-${PV}"
+
+inherit update-rc.d systemd
+
+TARGET_CC_ARCH += "${LDFLAGS}"
+do_configure () {
+    #need to support cross-compiling in open-isns only
+    (cd utils/open-isns; gnu-configize; \
+     ./configure --host=${TARGET_SYS} --build=${BUILD_SYS} --with-security=no )
+}
+
+do_compile () {
+    #make iscsistart one of PROGRAMS if install_user in do_install
+    #sed -i -e '/^PROGRAMS = /s;$; usr/iscsistart;' Makefile
+
+    #fix the ar used in open-isns
+    sed -i -e 's:ar cr :$(AR) cr :' ${S}/utils/open-isns/Makefile
+    oe_runmake user
+}
+
+do_install () {
+    #completely override the install_user as bugs in Makefile
+    #oe_runmake DESTDIR="${D}" install_user
+
+    #install necessary directories
+    install -d ${D}${sbindir} \
+        ${D}${sysconfdir}/init.d \
+        ${D}${sysconfdir}/iscsi \
+        ${D}${localstatedir}/lib/iscsi/nodes \
+        ${D}${localstatedir}/lib/iscsi/send_targets \
+        ${D}${localstatedir}/lib/iscsi/static \
+        ${D}${localstatedir}/lib/iscsi/isns \
+        ${D}${localstatedir}/lib/iscsi/slp \
+        ${D}${localstatedir}/lib/iscsi/ifaces \
+        ${D}/${mandir}/man8
+
+    install -p -m 755 ${S}/usr/iscsid ${S}/usr/iscsiadm \
+        ${S}/utils/iscsi-iname \
+        ${S}/usr/iscsistart ${D}/${sbindir}
+
+    install -p -m 644 ${S}/doc/iscsiadm.8 ${S}/doc/iscsid.8 ${D}/${mandir}/man8
+    install -p -m 644 ${S}/etc/iscsid.conf ${D}${sysconfdir}/iscsi
+    install -p -m 755 ${WORKDIR}/initd.debian ${D}${sysconfdir}/init.d/iscsid
+
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}${sysconfdir}/tmpfiles.d
+        echo "d /run/${BPN}/lock - - - -" \
+                     > ${D}${sysconfdir}/tmpfiles.d/iscsi.conf
+        install -d ${D}/etc/default/
+        install -p -m 755 ${WORKDIR}/iscsi-initiator ${D}${sysconfdir}/default/
+
+        install -d ${D}${systemd_unitdir}/system/
+        install -m 0644 ${WORKDIR}/iscsi-initiator.service \
+                        ${WORKDIR}/iscsi-initiator-targets.service \
+                        ${D}${systemd_unitdir}/system/
+    else
+        install -d ${D}/etc/default/volatiles
+        install -m 0644 ${WORKDIR}/99_iscsi-initiator-utils ${D}/etc/default/volatiles
+    fi
+}
+
+pkg_postinst_${PN}() {
+    #default there is no initiatorname.iscsi installed
+    #but it is needed or iscsid will fail
+
+    #will run only when postinst on target
+    if [ "x$D" != "x" ]; then
+        exit 1
+    fi
+    if [ ! -f ${sysconfdir}/iscsi/initiatorname.iscsi ]; then
+        echo "InitiatorName=$(${sbindir}/iscsi-iname)" > \
+        ${sysconfdir}/iscsi/initiatorname.iscsi
+    fi
+
+    if [ -e /etc/init.d/populate-volatile.sh ]; then
+        /etc/init.d/populate-volatile.sh update
+    elif command -v systemd-tmpfiles >/dev/null; then
+        systemd-tmpfiles --create ${sysconfdir}/tmpfiles.d/iscsi.conf
+    fi
+}
+
+SYSTEMD_SERVICE = " iscsi-initiator.service iscsi-initiator-targets.service "
+INITSCRIPT_NAME = "iscsid"
+INITSCRIPT_PARAMS = "start 30 1 2 3 4 5 . stop 70 0 1 2 3 4 5 6 ."