Age | Commit message (Collapse) | Author |
|
Since 2017-08-17 (git version 2.14.1.473.g3ec7d702a) using deprecated
git branch parameter "--set-upstream" causes a fetcher error. Replace
it by "--set-upstream-to".
https://git.kernel.org/pub/scm/git/git.git/commit/?id=52668846ea2d41ffbd87cda7cb8e492dea9f2c4d
says, it's deprecated since 2012-08-30 so hopefully all still supported
host distributions have new enough git to support "--set-upstream-to".
ERROR: PACKAGE do_unpack: Fetcher failure: ...;
git -c core.fsyncobjectfiles=0 branch --set-upstream master origin/master failed with exit code 128, output:
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
ERROR: PACKAGE do_unpack: Function failed: base_do_unpack
Signed-off-by: Andre Rosa <andre.rosa@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2ab50074c1a6c56a8a178755de108447d7b7acaf)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code in these two functions is meant to be equivlanet in behaviour
but isn't. Add in code to ensure files that don't exist are handled
consistently by both functions. Users did report being able to generate
tracebacks otherwise.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If using OE's externalsrc with a source tree that is not tracked by git
and contains broken symlinks, you can receive "TypeError: unorderable
types: NoneType() < str()" within the file checksum code due to:
checksums.sort(key=operator.itemgetter(1))
Don't add files with no checksum to the checksums list in order to avoid
this.
(Bitbake rev: 484fe5a3f5b840e5422cbdff0eef9aecfe944a19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some services such as SourceForge seem to struggle to keep up under load, with
the result that over half of the autobuilder checkuri runs fail with
sourceforge.net "connection timed out".
Attempt to mitigate this by re-attempting once the network operation on failure.
(Bitbake rev: 54b1961551511948e0cbd2ac39f19b39b9cee568)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hand applied
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We recalculate the taskhash to ensure the version we have matches
what we think it should be. When we write out a sigdata file, use
the calculated value so that we don't overwrite any existing file.
This leaves any original taskhash sigdata file intact to allow a
debugging comparison.
(Bitbake rev: dac68af6f4add9c99cb7adcf23b2ae89b96ca075)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixup
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake can parse metadata in the cooker and in the worker during builds. If
the metadata isn't deterministic, it can change between these two parses and
this confuses things a lot. It turns out to be hard to debug these issues
currently.
This patch ensures the basehashes from the original parsing are passed into
the workers and that these are checked when reparsing for consistency. The user
is shown an error message if inconsistencies are found.
There is debug code in siggen.py (see the "Slow but can be useful for debugging
mismatched basehashes" commented code), we don't enable this by default due to
performance issues. If you run into this message, enable this code and you will
find "sigbasedata" files in tmp/stamps which should correspond to the hashes
shown in this error message. bitbake-diffsigs on the files should show which
variables are changing.
(Bitbake rev: 46207262ee6cdd2e49c4765481a6a24702ca4843)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed up do to python3 changes not being in krogoth.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using a PREMIRROR with plain (non-unpack) files, a SRC_URI like
SRC_URI = "file://devmem2.c"
will cause devmem2.c to be a symlink in the WORKDIR pointing to the
local PREMIRROR.
Trying to apply a patch on this file will either modify the file on
the PREMIRROR or will fail due to sanity checks:
ERROR: devmem2-1.0-r7 do_patch: Command Error: 'quilt --quiltrc /cache/build-ubuntu/sysroots/x86_64-oe-linux/etc/quiltrc push' exited with 1 Output:
Applying patch devmem2-fixups-2.patch
File devmem2.c is not a regular file -- refusing to patch
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If bitbake ends before _uiready and bb.event.LogHandler was add
to the bitbake logger it causes an infinite loop when logging
something.
The scenario is print_ui_queue is called at exit and executes
the log handlers [2] one of them is bb.event.LogHandler this handler
appends the same entry to ui_queue causing the inifine loop [3].
In order to fix a new copy of the ui_queue list is created when iterate
ui_queue.
[YOCTO #10399]
[1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=10399#c0
[2] http://git.openembedded.org/bitbake/tree/lib/bb/event.py?id=41d9cd41d40b04746c82b4a940dca47df02514fc#n156
[3]
http://git.openembedded.org/bitbake/tree/lib/bb/event.py?id=41d9cd41d40b04746c82b4a940dca47df02514fc#n164
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use logger.addHandler(), rather than assigning an array of Handlers
to the loggers handlers property directly, to avoid a warning from
Python 3 about unclosed files:
$ bitbake
Nothing to do. Use 'bitbake world' to build everything, or run 'bitbake --help' for usage information.
WARNING: /home/joshuagl/Projects/poky/bitbake/lib/bb/event.py:143: ResourceWarning: unclosed file <_io.TextIOWrapper name='/home/joshuagl/Projects/poky/build/tmp/log/cooker/qemux86/20161004094928.log' mode='a' encoding='UTF-8'>
logger.handlers = [stdout]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All logging messages are printed on stdout when processing
UI event queue. This makes it impossible to distinguish between
errors and normal bitbake output. Output to stderror or stdout
depending on log level should fix this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The CUPS ipptool URL we were checking now redirects to github where the tarball
isn't present, so remove it from the test suite.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_ORIGENV value on the datastore can be NoneType thus raising an AttributeError
exception when calling the getVar method. To avoid this, a check is done before
accesing it.
[YOCTO #9567]
(Bitbake rev: f368f5ae64a1681873f3d81f3cb8fb38650367b0)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some users may want to use authenticated SSH connections with credentials stored
in a keyring, such as gnome-keyring. These typically need a DBus session bus
connection, so pass DBUS_SESSION_BUS_ADDRESS into the fetcher environment.
To avoid the user needing to set it in their local.conf (which wouldn't be
usable) or adding it to the environment-cleansing whitelist (which would
potentially impact builds) allow the variables being passed to the fetchers to
come from the data store (first) or the original environment (second).
>From bitbake master rev: 20ad1ea87712d042bd5d89ce1957793f7ff71da0
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed typo that caused incorrect processing of BBEVENTLOG
environment variable. Even if variable is set it was ignored
by bitbake.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you can end up in a situation where you need to specify that
a specific runtime entity should be provided by a specific entry.
An example of this is bluez where you could end up in a situation where
for example:
NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez
NOTE: multiple providers are available for runtime bluez-hcidump (bluez-hcidump, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match bluez-hcidump
The only option here is to set something like PREFERRED_PROVIDER_bluez4 = "bluez4"
which is clearly not very informative.
I've actually held off adding RPROVIDER support for a long while as this
does have sigificant potential for misuse. It doesn't for example allow
multiple runtime providers of the same name to coexist, that simply isn't
supported. It therefore doesn't replace some of the name mappings such
as busybox verses coreutils that OE-Core faces as that is a different
problem with different constraints. This mechanism is simply to provide
bitbake with a hint to decide what the dependency tree should look like.
Also, this allows us to stop printing a confusing message telling the user
to set PREFERRED_PROVIDER when the setting needed would be rather ambiguous.
[YOCTO #5044]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Back in history the code did depend on previous build results. This was
bad for determinism and we no longer do that. Update comments to match
the current behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now prefix log messages coming from worker task context with the
PF and task info, however parsing messages all have to be manually
prefixed which is ugly and error prone. This change modifies the log
handler filter so this happens automatically, meaning we don't have
to change every message to include that information. This makes error
messages longer but more usable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An invalid task causes bitbake to exit incorrectly, firing a
CommandCompleted event rather than a CommandFailed one. This
means that clients listening for CommandFailed events are
unable to detect the build failure even though one occurred.
Passing an exception string to finishAsyncCommand when a task
fails causes the CommandFailed event to be fired correctly.
[YOCTO #9087]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When multiple recipes which both provide something are being built, bitbake
informs us that most likely one of them provides something the other doesn't,
which is usually correct, but unfortunately it's rather painful to figure out
exactly what that is.
This patch dumps two sets of information, one is the provides information for
each recipe, filtered so only common components are removed. The other is a list
of dependees on the recipe, since sometimes this can easily identify why something
is being built.
Its not straightforward for bitbake to obtain the information but since the
warning/error code path isn't the normal one, we can afford to go through some
less than optimal processing to aid debugging.
Also provide the same information even if we're showing a warning since its still
useful.
[YOCTO #8032]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake variables don't include ":" characters so exclude these from the variable
expansion regexp.
This assists when parsing shell code which does A=${B:-C} as we don't want a
dependency on a variable called "B:-C".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were no tests that verified the value of origvalue in the callback
routines used by edit_metadata(). This patch adds one for a simple
multiline variable.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
edit_metadata() would corrupt a variable that was multiline, but
had the ending quotes on the same line as the last value. For example:
TEST_VAR = " foo \
bar"
would become " foo ba" because the code would always delete the last
character on the line and then do it again if the line ended in the
quote. This however doesn't show up if you have:
TEST_VAR = " foo \
bar \
"
which is how all the test cases were written.
This patch fixes that bug and adds and fixes a test that matched the bugs
behavior rather than the expected behavior.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have been seeing UnicodeDecodeErrors when handling the
ImagePkgList MetadataEvent in ORMWrapper's
save_target_file_information() if the event includes filenames
that include non-ASCII characters.
In the short term work around this by converting paths to the
unicode type when passing them to Django's ORM. This is a bit of
a hack but it's too late in the cycle to do anything more invasive.
[YOCTO #9142]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildinfohelper stores current Build object in its internal
state. Any changes to Build object will be lost if internal
state is not updated as current buildinfohelper code
saves Build object from internal state when build is
completed.
This bug causes incorrect build state when build is cancelled.
Updating internal state should fix it.
Note, that this commit updates internal state after status of
the build is changed to Build.CANCELLED. There are several other
places in the code where Build object is updated without updating
internal state. They should be carefully analyzed and fixed.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When bitbake doesn't need to build anything it still sends
ImagePkgList event with empty 'pkgdata', 'imgdata' and 'filedata'
fields. This causes crash in buildinfohelper code as it's assumed
that above mentioned fields always have data keyed by build target:
ERROR: u'core-image-minimal'
Traceback (most recent call last):
File "toasterui.py", line 423, in main
buildinfohelper.store_target_package_data(event)
File "buildinfohelper.py", line 1218, in store_target_package_data
imgdata = BuildInfoHelper._get_data_from_event(event)['imgdata'][target.target]
KeyError: u'core-image-minimal'
Fixed this by using dict.get method with empty dictionary as default
return value instead of trying to get value without checking if target
key is in the data.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a build is cancelled the build (action) is complete if it has been
caused the request being cancelled then update the build outcome
accordingly.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
toasterui exits event loop on one of the following events:
CommandCompleted, CommandFailed or CommandExit.
Unfortunately none of them come from bitbake when build fails.
This is normai if toasterui runs in observer mode. However, if it's
in build mode this causes toasterui to stuck in the infinite loop
waiting for new events.
The only event we can rely on is BuildCompleted as it always
comes from bitbake unlike 3 above mentioned events.
Modified the code to always shutdown toasterui in build mode
on BuildCompleted event.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The keys 'started', 'ended', 'cpu_time_user', 'disk_io_read' and
'disk_io_write' were added to the event recently, so they don't
exist in the events generated by bitbake server from older releases.
Checking if task_to_update structure has these keys before using
them should fix build of older releases.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildinfohelper.brbe is lost when buildinfohelper is closed.
This causes incorrect report of brbe when build is done.
Saved brbe attribute before closing buildinfohelper and used
it to report correct brbe.
Got rid of useless and confusing 'ToasterUI build done 1'
log message.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
DepTreeGenerated event doesn't contain 'providermap' data in jethro.
Modified buildinfohelper to handle events without this data. This
should make it possible to handle jethro events coming from jethro
bitbake server by the latest buildinfohelper.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Return value of self.BBServer.registerEventHandler differs between
jethro and master. To be able to build jethro toaster should be
able to communicate with jethro bitbake server i.e. it must work
with both old and new registerEventHandler call.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In current toaster code BRBE(build request:build environment) value
is passed from toaster to buildinfohelper through the 'SetBRBE' event.
Passing it through environment variable is easier as it doesn't
involve rpc communication between toaster and bitbake server.
It also eliminates the need in running bitbake observer process.
Added parameter 'brbe' to BuildInfoHelper.__init__
Used environment variable TOASTER_BRBE to set brbe for
buildinfohelper object.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was used for workaround git 1.7.9.2 which was released in 2012 which
should not be existed on nowadays host, so remove it to avoid
confusions.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python 2's sqlite3 module defaults to returning Unicode strings for SQL
text queries, which could trickle down to other parts of bitbake code and
cause unexpected Unicode conversions. Using byte strings avoids this issue.
For example, the git fetcher's AUTOREV support caches HEAD SHA1's using
bb.persist_data, so sometimes the git command strings passed to fetch2's
runfetchcmd() were unicode, potentially causing UnicodeDecodeErrors when
it appended the values of environment variables containing non-ASCII chars.
[YOCTO #9382]
Signed-off-by: Daniel Klauer <daniel.klauer@gin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sstate.bbclass for example writes siginfo files to a separate location
but we need to read taint data from the standard path.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The taint values need to be passed from the server to the workers to
ensure they see the same stamp values. Also ensure that the "nostamp:"
prefix isn't included in the checksum value to match the server
calculation. This ensures the checksums are all consistent.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In theory all the information to recalcuate the task signatures was written
into the siginfo/sigdata files. In reality, some of the information was
written into the filename.
Firstly this patch duplicates that info into the file itself just for easy
of use since its small.
Secondly, we abstract out the existing "calculate the checksum" code for
the taskhash, and add a function to calculate the bashhash based on the
informaiton within the file.
Finally, we call these functions when we're writing out the data to check
that the data we're writing is consistent. I've found a couple of places
it wasn't and its good to know about these in advance, rather than having
a siginfo/sigdata file which a given hash in its filename but a contents
which give a different result.
This should all combine to avoid a certain class of checksum bugs making
it into world, and identifying problems in advance.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When I enabled debugging of the checksum code, I found the value calculated
from siginfo/sigdata files for do_fetch tasks never matched. This was due
to an error in the way the data was being stored for these, it wasn't ordered
correctly. This patch fixes things so the checksums calculated from
siginfo/sigdata files is correct when file checksums are present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The real method is a few lines later, this one is incorrect and
just causing confusion. Remove it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tests were skipped when running without network even though they
didn't require network. This commit also adds a test case for URLs with
ports in them (the ports should not be considered when doing trusted
network checks).
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake would fail to classify the following URL as belonging to a
allowed network, because of the port number in the url.
BB_ALLOWED_NETWORKS = "*.example.com"
SRC_URI = "http://git.example.com:8080/foo.tar.gz"
Since protocols aren't specified in the BB_ALLOWED_NETWORKS variable,
it's reasonable to believe that this should work regardless of protocol
being used.
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add additional metadata to the layer created for build history to be
able to identify the layer and recipe later on. Specifically this is the
branch and release to which the recipe and layer are associated with
enabling differentiation of two recipes which are local release and
master and 'master' release.
[YOCTO #8528]
[YOCTO #8545]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's very possible that we added layer as:
BBLAYERS += "/path/to/meta/"
then there would be warning:
WARNING: No bb files matched BBFILE_PATTERN_core '^/path/to/meta//'
This patch can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the code as it stands today it not possible to execute a python function
and get "normal" python exception handling behaviour. If a python function
raises an exception, it forces a traceback to be printed and the exception
becomes a FuncFailed exception.
This adds in a parameter 'pythonexception' which allows standard python
exceptions to be passed unchanged with no traceback. Ultimately we may want
to change to this convention in various places but at least it means we can
start to add sane functions now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some codepaths where the file checksum is verified and can
be found to mismatch but the 'rename' logic doesn't kick in. If code
relies on the presence of a file for the checksum having been checked
(e.g. uninative.bbclass) then it can be used when the checksum hasn't
matched.
Therefore rename the file whenever an invalid checksum is encountered.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prevent a hang when shutdown() is called during parsing (e.g. after
SIGINT). We must not append 'None' to the jobs queue. Otherwise the
worker loop inside Parser.realrun() may break out at the wrong point,
causing the results queue thread blocking bitbake indefinitely.
[YOCTO #9319]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|