| Age | Commit message (Collapse) | Author |
|---|
|
Add a '\n' to the last line of the file to fix:
No newline at end of file
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the power were to fail, it doesn't matter to us much if the data
makes it to disk or not, we'd have other problems. However an fsync()
call on a multi build autobuilder is painful so lets avoid them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We shouldn't immediately remove the pid file when stopping the server, if we do, this
causes a traceback within the server itself which can then hang. Fix this by removing
the stale pid file as the last thing we do.
Also:
* don't printing a new "waiting" line every 0.5 seconds.
* make the loop more granular since the user can 'feel' the 0.5 seconds
[YOCTO #5984]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default value of 0.5 seconds before sending the pr-server a
SIGTERM is not enough to guarantee that sqlite has committed all
the pr data to the database. By polling the pid to see if it is
still running, this allows the pr-server process to shutdown
cleanly and finish the final pr data commit.
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In exclusive mode, we need to complete the transaction for writes to make
it to the database. Therefore add sync calls to ensure this happens.
Autocommit mode is significantly (100 times) slower so caching the
data is of significant benefit.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using the threading mixin class resulted in large amounts of memory
being used by the PR server for no good reason. Using a receiver thread
and a thread to do the actual database operations on a single connection
gives the same performance with a much saner memory overhead so
switch to this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since we don't support using multiple servers on the same database file,
don't use the BEGIN/COMMIT syntax and allow writes to the database
to work ~100 times faster with no transaction locking.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We only support one server using the database at a time so take an exclusive
lock and avoid later lock overhead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the database is locked we will get an immediate error indicating so,
there is no retry timeout. The looping code is therefore useless, the loop
count is near instantly exceeded.
Using a time based retry means we can wait a sensible time, then gracefully
exit.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Try and avoid errors like "ERROR: database table is locked: PRMAIN_nohist"
by retrying if we see the string "is locked".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes the PR server multithreaded and able to handle multiple connections
at once which means its no longer a build bottle neck when serving one connection
at a time. I've experimented and database connection for each thread seems to
cause the least issues, pushing the contention for sqllite to handle itself.
This means moving the db/table connection code into the actual function methods.
It doesn't abstract well as a function since we need the db object around for
the lifetime of the function as well as the table else we lose the connection.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enabling threading for the PRServer causes a number of issues. Firstly is
the obtuse error:
sqlite3.InterfaceError: Error binding parameter 0 - probably unsupported type
which is due to the class not being derived from object. See:
http://docs.python.org/2/library/sqlite3.html#registering-an-adapter-callable
Secondly, we want to enable multithreadded access to the database so we do this
when we open it. This opens the way up to multithreading the PR server.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commit 972bc43e6d5b1207b944b3baa8f9805adb35dda7 (serv.py: Fix hang
when spawned dynamically with bitbake) introduced a regression,
because the wrong patch was submitted. The syntax was incorrect in
the original patch. The logger iterator must be used with a call to
getLogger().
[YOCTO #5059]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The PRServer has the possibility to hang indefinitely blocking on a
semaphore processing a xmlrpc request to send an event back to the
main bitbake instance. This was observed during a "bitbake -e" on a
heavily loaded machine and the main bitbake instance and cooker exited
before the PRServer emitted its first log.
The stack trace is provided below as to show what happens every time a
logger.info() is executed in the PRServer. Not only does it write to
the stream handler but it also tries to send the event to the main
event processor.
self._notempty.acquire()
self.queue.put(event)
_ui_handlers[h].event.send(event)
fire_ui_handlers(event, d)
fire(record, None)
self.emit(record)
hdlr.handle(record)
self.callHandlers(record)
self.handle(record)
self._log(INFO, msg, args, **kwargs)
(self.dbfile, self.host, self.port, str(os.getpid())))
self.work_forever()
pid = self.daemonize()
self.prserv.start()
singleton.start()
self.prhost = prserv.serv.auto_start(self.data)
cooker.pre_serve()
bb.cooker.server_main(self.cooker, self.main)
self.run()
code = process_obj._bootstrap()
self._popen = Popen(self)
self.serverImpl.start()
server.detach()
server = start_server(servermodule, configParams, configuration)
ret = main()
It was never intended for the PRServer to send its logs anywhere but
its own log file. The event processing is an artifact of how the
PRServer was forked and it inherits the event log handlers. The
simple fix is to clean up and purge all the log handlers after the
fork() but before doing any of the typical PRServer work or logging.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The standard python socket connect has long timouts which make sense for remote
connections but not local things like the PR Service. This adds a timeout
parameter to the common xmlrpc server creation function and sets it to a more
reasonable 5 seconds.
Making the PR server instantly exit is a good way to test the effect of this
on bitbake.
We can remove the bodged timeout in the PRServer terminate function which
has the side effect of affecting global scope.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mark Hatle spotted there were pid files being left around. This patch
fixes things so the removal function is called correctly, the code
contained a typo.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the change to bitbake-worker we need to ensure the workers know
how to contact the PR service, the magic 0 port and singleton is
no longer enough.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
StandardError doesn't exist in python 3, use Exception instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current if the PR Service fails to start, bitbake carries on regardless or
hangs with no error message. This adds an exception and then handles it correctly
so the UIs correctly handle the error and exit cleanly.
[YOCTO #4010]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In deamon mode we need to ensure the logging module is sending log data to the
log file. These changes ensure this happens correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using the threading module interacts badly with multiprocessing used elsewhere
in bitbake under certain machine loads. This was leading to bitbake hanging on
Ctrl+C when the PR Server was being used.
This patch converts it to always use the daemonize code which
then means the threading code isn't required.
[YOCTO #3742]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- remove PRSERV_PORT variable
- use 'hostname:port' as PRSERV_HOST format
- use 'localhost:0' for enabling the local PRServer
[YOCTO #3744]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1942]
Ping the PRService only if PRSERV_HOST and PRSERV_PORT are set.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* this is used in all other bitbake parts where sqlite3 is used, don't
know why it wasn't used here, but it fails e.g. on Gentoo
Traceback (most recent call last):
File "bin/bitbake", line 39, in <module>
from bb import cooker
File "lib/bb/cooker.py", line 39, in <module>
import prserv.serv
File "lib/prserv/serv.py", line 4, in <module>
import xmlrpclib,sqlite3
ImportError: No module named sqlite3
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1126]
A local PR service will be started and stopped automatically along
with the bitbake invocation/ternimation.
This local PR service will be started only and if only when the
PRSERV_HOST is set to 'localhost' and PRSERV_PORT is set to '0'.
When started, the sqlite3 database is stored at
"${PERSISTEN_DIR}/prserv.sqlite3" or "${CACHE}/prserv.sqlite3".
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1556]
1. Added the package_arch into the index to the DB table. Because the
change in PACKAGE_ARCH will results in different checksum, and it is
better to have seperate PR value domains for differnt PACKAGE_ARCH of
the same pakcage.
2. Changed the PR service to operate in no history mode. In this mode,
the for a given query tuple (version, pkgarch, checksum), the returned
value will be the largest among all the values of the same (version,
pkgarch). This means the PR value returned can NOT be decremented.
3. Added export function. For each (version, pkgarch) tuple, only the
record with the maximum value will be exported.
4. Added import function. The record will only be imported if the
imported value is larger than the value stored in the DB with the same
(version, pkgarch, checksum) tuple.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update exception handling syntax to use the modern style:
except ExcType as localvar
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added the initial implementation of the server side PR service.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Robert Yang
Richard Purdie
Konrad Scherer
Jason Wessel
Constantin Musca
Lianhao Lu
Martin Jansa
Scott Garman