path: root/packages/u-boot/u-boot-mkimage-openmoko-native/nand-otp.patch

Index: u-boot/common/cmd_nand.c
===================================================================
--- u-boot.orig/common/cmd_nand.c
+++ u-boot/common/cmd_nand.c
@@ -392,6 +392,14 @@
 			else
 				ret = nand->write_oob(nand, off, size, &size, 
 						      (u_char *) addr);
+		} else if (s != NULL && !strcmp(s, ".otp")) {
+			/* read out-of-band data */
+			if (read)
+				ret = nand->read_otp(nand, off, size, &size,
+						     (u_char *) addr);
+			else
+				ret = nand->write_otp(nand, off, size, &size,
+						      (u_char *) addr);
 		} else {
 			if (read)
 				ret = nand_read(nand, off, &size, (u_char *)addr);
@@ -527,8 +535,9 @@
 	"nand    - NAND sub-system\n",
 	"info                  - show available NAND devices\n"
 	"nand device [dev]     - show or set current device\n"
-	"nand read[.jffs2]     - addr off|partition size\n"
-	"nand write[.jffs2]    - addr off|partiton size - read/write `size' bytes starting\n"
+	"nand read[.jffs2, .oob, .otp] addr off|partition size\n"
+	"nand write[.jffs2, .oob, .otp] addr off|partiton size\n"
+	"  - read/write `size' bytes starting\n"
 	"    at offset `off' to/from memory address `addr'\n"
 	"nand erase [clean] [off size] - erase `size' bytes from\n"
 	"    offset `off' (entire device if not specified)\n"
Index: u-boot/cpu/arm920t/s3c24x0/nand.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c
+++ u-boot/cpu/arm920t/s3c24x0/nand.c
@@ -205,7 +205,7 @@
 }
 #endif
 
-int board_nand_init(struct nand_chip *nand)
+int s3c24x0_nand_init(struct nand_chip *nand)
 {
 	u_int32_t cfg;
 	u_int8_t tacls, twrph0, twrph1;
Index: u-boot/drivers/nand/nand_base.c
===================================================================
--- u-boot.orig/drivers/nand/nand_base.c
+++ u-boot/drivers/nand/nand_base.c
@@ -2042,6 +2042,32 @@
 }
 #endif
 
+/*
+ * See nand_read_oob and nand_write_oob
+ */
+
+static int nand_read_otp(struct mtd_info *mtd, loff_t from, size_t len,
+    size_t *retlen, u_char *buf)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (!this->read_otp)
+		return -ENOSYS;
+	return this->read_otp(mtd, from, len, retlen, buf);
+
+}
+
+static int nand_write_otp(struct mtd_info *mtd, loff_t to, size_t len,
+    size_t *retlen, const u_char *buf)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (!this->write_otp)
+		return -ENOSYS;
+	return this->write_otp(mtd, to, len, retlen, buf);
+}
+
+
 /**
  * single_erease_cmd - [GENERIC] NAND standard block erase command function
  * @mtd:	MTD device structure
@@ -2613,6 +2639,8 @@
 	mtd->write_ecc = nand_write_ecc;
 	mtd->read_oob = nand_read_oob;
 	mtd->write_oob = nand_write_oob;
+	mtd->read_otp = nand_read_otp;
+	mtd->write_otp = nand_write_otp;
 /* XXX U-BOOT XXX */
 #if 0
 	mtd->readv = NULL;
Index: u-boot/include/linux/mtd/mtd.h
===================================================================
--- u-boot.orig/include/linux/mtd/mtd.h
+++ u-boot/include/linux/mtd/mtd.h
@@ -95,6 +95,9 @@
 	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
+	int (*read_otp) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write_otp) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
 	/*
 	 * Methods to access the protection register area, present in some
 	 * flash devices. The user data is one time programmable but the
Index: u-boot/include/linux/mtd/nand.h
===================================================================
--- u-boot.orig/include/linux/mtd/nand.h
+++ u-boot/include/linux/mtd/nand.h
@@ -307,6 +307,10 @@
 	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
 	int		(*scan_bbt)(struct mtd_info *mtd);
+	int		(*read_otp)(struct mtd_info *mtd, loff_t from,
+			    size_t len, size_t *retlen, u_char *buf);
+        int		(*write_otp) (struct mtd_info *mtd, loff_t to,
+			    size_t len, size_t *retlen, const u_char *buf);
 	int		eccmode;
 	int		eccsize;
 	int		eccbytes;
Index: u-boot/board/neo1973/gta01/Makefile
===================================================================
--- u-boot.orig/board/neo1973/gta01/Makefile
+++ u-boot/board/neo1973/gta01/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
+OBJS	:= gta01.o pcf50606.o nand.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
 SOBJS	:= ../common/lowlevel_init.o
 
 .PHONY:	all
Index: u-boot/board/neo1973/gta01/nand.c
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta01/nand.c
@@ -0,0 +1,121 @@
+/*
+ * nand.c - Board-specific NAND setup
+ *
+ * Copyright (C) 2007 by Openmoko, Inc.
+ * Written by Werner Almesberger <werner@openmoko.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */
+#include "linux/mtd/mtd.h"
+#include "linux/mtd/nand.h"
+#include "asm/errno.h"
+
+
+int s3c24x0_nand_init(struct nand_chip *nand);
+
+
+static void samsung_nand_begin_otp(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* @@@FIXME: this is ugly - we select the NAND chip to send the
+	   mode switch commands, knowing that it will be switched off later */
+	this->select_chip(mtd, 0);
+	/* "magic" mode change */
+	this->cmdfunc(mtd, 0x30, -1, -1);
+	this->cmdfunc(mtd, 0x65, -1, -1);
+}
+
+
+static void samsung_nand_end_otp(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* read/write deselected the chip so now we need to select again */
+	this->select_chip(mtd, 0);
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+	this->select_chip(mtd, -1);
+}
+
+
+static loff_t otp_page[] = {
+	0x15,	/* 00-XX-00-00, with XX = 15h-19h */
+	0x16,
+	0x17,
+	0x18,
+	0x19,
+	0x1b,	/* 00-1B-00-00 */
+};
+
+#define OTP_PAGES (sizeof(otp_page)/sizeof(*otp_page))
+
+
+static int convert_otp_address(loff_t *addr, size_t *len)
+{
+	int page;
+
+	if (*len && *addr >> 9 != (*addr+*len-1) >> 9)
+		return -EINVAL;
+	if (*len > 512)
+		return -EINVAL;
+	page = *addr >> 9;
+	if (page >= OTP_PAGES)
+		return -EINVAL;
+	*addr = otp_page[page] << 9;
+	return 0;
+}
+
+
+static int samsung_nand_read_otp(struct mtd_info *mtd, loff_t from,
+    size_t len, size_t *retlen, u_char *buf)
+{
+	int ret;
+
+	ret = convert_otp_address(&from, &len);
+	if (ret)
+		return ret;
+	samsung_nand_begin_otp(mtd);
+	ret = mtd->read(mtd, from, len, retlen, buf);
+	samsung_nand_end_otp(mtd);
+	return ret;
+}
+
+
+static int samsung_nand_write_otp(struct mtd_info *mtd, loff_t to,
+    size_t len, size_t *retlen, const u_char *buf)
+{
+	int ret;
+
+	ret = convert_otp_address(&to, &len);
+	if (ret)
+		return ret;
+	samsung_nand_begin_otp(mtd);
+	ret = mtd->write(mtd, to, len, retlen, buf);
+	samsung_nand_end_otp(mtd);
+	return ret;
+}
+
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->read_otp = samsung_nand_read_otp;
+	nand->write_otp = samsung_nand_write_otp;
+	return s3c24x0_nand_init(nand);
+}
Index: u-boot/board/neo1973/gta02/nand.c
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/nand.c
@@ -0,0 +1,39 @@
+/*
+ * nand.c - Board-specific NAND setup
+ *
+ * Copyright (C) 2007 by Openmoko, Inc.
+ * Written by Werner Almesberger <werner@openmoko.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */
+#include "linux/mtd/mtd.h"
+#include "linux/mtd/nand.h"
+
+
+int s3c24x0_nand_init(struct nand_chip *nand);
+
+
+/* Add OTP et al later */
+
+
+int board_nand_init(struct nand_chip *nand)
+{
+	return s3c24x0_nand_init(nand);
+}