DESCRIPTION = "OpenEZX 2.6 Linux Development Kernel for the Motorola EZX GSM phones" AUTHOR = "The OpenEZX Team " HOMEPAGE = "http://www.openezx.org" SRCREV = "0dc52be59e0568f0b77dc35d138749bfd8525d51" KV = "2.6.34-oe" PV = "${KV}+gitr${SRCREV}" PR = "r7" require linux.inc # Make sure not to use thumb[-interworking] ARM_INSTRUCTION_SET = "arm" THUMB_INTERWORKING = "no" SRC_URI = "\ git://git.openezx.org/openezx.git;protocol=git;branch=ezx/current \ " S = "${WORKDIR}/git" ############################################################## # The kernel image used to reside on a seperate flash partition # It can be flashed from userspace, so we should package it anyways # (flash_unlock /dev/mtdX && flash_eraseall /dev/mtdX && flashcp /boot/zImage /dev/mtdX) COMPATIBLE_HOST = "arm.*-linux" COMPATIBLE_MACHINE = '(a780|e680|a910|a1200|rorkre2|rokre6)' # Provide a fallback kernel command line, even if parameters should be given # via boot_usb or gen-blob CMDLINE = "console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0" ARM_KEEP_OABI = "1" ############################################################### # module configs specific to this kernel # #module_autoload_pxaficp_ir = "pxaficp_ir" #module_autoload_snd-pcm-oss = "snd-pcm-oss" do_configure_prepend() { install -m 0644 ${S}/arch/arm/configs/ezx_defconfig ${WORKDIR}/defconfig } # linux.inc overrides LOCAVERSION but we like to have one do_compile_prepend() { sed -i -e '/CONFIG_LOCALVERSION=/d' ${S}/.config echo 'CONFIG_LOCALVERSION="-oe"' >>${S}/.config }