From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- recipes/libftdi/files/autotools.patch | 895 +++++++++++++++++++++++ recipes/libftdi/files/doxygen-configure.patch | 28 + recipes/libftdi/files/ftdi_eeprom-0.2-moko.patch | 16 + recipes/libftdi/ftdi-eeprom-native_0.2.bb | 9 + recipes/libftdi/ftdi-eeprom_0.2.bb | 13 + recipes/libftdi/libftdi-native_0.13.bb | 5 + recipes/libftdi/libftdi-native_0.9.bb | 5 + recipes/libftdi/libftdi_0.13.bb | 20 + recipes/libftdi/libftdi_0.9.bb | 17 + 9 files changed, 1008 insertions(+) create mode 100644 recipes/libftdi/files/autotools.patch create mode 100644 recipes/libftdi/files/doxygen-configure.patch create mode 100644 recipes/libftdi/files/ftdi_eeprom-0.2-moko.patch create mode 100644 recipes/libftdi/ftdi-eeprom-native_0.2.bb create mode 100644 recipes/libftdi/ftdi-eeprom_0.2.bb create mode 100644 recipes/libftdi/libftdi-native_0.13.bb create mode 100644 recipes/libftdi/libftdi-native_0.9.bb create mode 100644 recipes/libftdi/libftdi_0.13.bb create mode 100644 recipes/libftdi/libftdi_0.9.bb (limited to 'recipes/libftdi') diff --git a/recipes/libftdi/files/autotools.patch b/recipes/libftdi/files/autotools.patch new file mode 100644 index 0000000000..ab0bb02a85 --- /dev/null +++ b/recipes/libftdi/files/autotools.patch @@ -0,0 +1,895 @@ +Index: libftdi-0.13/configure.ac +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ libftdi-0.13/configure.ac 2008-07-18 14:35:52.710117546 +0200 +@@ -0,0 +1,53 @@ ++# -*- Autoconf -*- ++# Process this file with autoconf to produce a configure script. ++ ++AC_PREREQ(2.61) ++AC_INIT([libftdi], [0.13]) ++AM_INIT_AUTOMAKE ++AC_CONFIG_SRCDIR([config.h.in]) ++AC_CONFIG_HEADER([config.h]) ++ ++AC_CONFIG_MACRO_DIR([m4]) ++ ++# Checks for programs. ++AC_PROG_CC ++AC_PROG_CPP ++AC_PROG_INSTALL ++AC_PROG_LN_S ++AC_PROG_MAKE_SET ++AC_PROG_RANLIB ++AM_PROG_LIBTOOL ++AC_LIB_RPATH ++AC_LIB_LINKFLAGS_FROM_LIBS ++ ++# Checks for libraries. ++PKG_PROG_PKG_CONFIG ++PKG_CHECK_MODULES([LIBUSB],[libusb >= 0.1.7],,[AC_MSG_ERROR(libusb library not found.)]) ++ ++# Checks for header files. ++AC_HEADER_STDC ++AC_CHECK_HEADERS([stdlib.h string.h sys/ioctl.h sys/time.h unistd.h]) ++ ++# Checks for typedefs, structures, and compiler characteristics. ++AC_C_CONST ++AC_HEADER_TIME ++ ++# Checks for library functions. ++AC_PROG_GCC_TRADITIONAL ++AC_FUNC_MALLOC ++AC_FUNC_MEMCMP ++AC_FUNC_REALLOC ++AC_FUNC_SELECT_ARGTYPES ++AC_CHECK_FUNCS([memmove memset select strtol]) ++ ++AC_CHECK_ENABLE_ASYNC_MODE ++AC_CHECK_ENABLE_DOCS ++ ++AC_CONFIG_FILES([Makefile ++ libftdi-config ++ libftdi.pc ++ libftdi.spec ++ doc/Makefile ++ src/Makefile]) ++AC_CONFIG_COMMANDS([default],[[chmod a+x libftdi-config]],[[]]) ++AC_OUTPUT +Index: libftdi-0.13/configure.in +=================================================================== +--- libftdi-0.13.orig/configure.in 2008-06-13 10:28:54.000000000 +0200 ++++ /dev/null 1970-01-01 00:00:00.000000000 +0000 +@@ -1,55 +0,0 @@ +-AC_INIT(configure.in) +- +-AM_CONFIG_HEADER(config.h) +-AM_INIT_AUTOMAKE(libftdi, 0.13) +- +-AC_LANG_C +-AC_PROG_CC +-AM_PROG_LIBTOOL +- +-dnl check for libusb-config +-AC_PATH_PROG(HAVELIBUSB, libusb-config, $PATH) +- +-if test ! -z "$HAVELIBUSB"; then +- LIBUSB_CFLAGS=`$HAVELIBUSB --cflags` +- LIBUSB_LIBS=`$HAVELIBUSB --libs` +- +- CFLAGS="$CFLAGS $LIBUSB_CFLAGS" +- LIBS="$LIBS $LIBUSB_LIBS" +-else +- AC_MSG_ERROR([*** libusb-config not found. You need a working libusb installation.]) +-fi +- +-dnl check for version of libusb +-AC_MSG_CHECKING([if libusb version is >= 0.1.7]) +-libusb_version_needed="1007" +-libusb_version=`$HAVELIBUSB --version | sed -e "s/libusb //" | awk 'BEGIN { FS = "."; } { printf "%d", ($''1 * 1000 + $''2) * 1000 + $''3;}'` +- +-if test $libusb_version -lt $libusb_version_needed; then +- AC_MSG_RESULT(no) +- AC_MSG_ERROR([*** libusb is too old ($libusb_version). You need a libusb installation newer or equal to 0.1.7.]) +-else +- AC_MSG_RESULT(yes) +-fi +- +-ENABLE_ASYNC_MODE=0 +-AC_ARG_WITH(async-mode, +-[ --with-async-mode enable experimental async mode. Linux only.], +-[ +- AC_MSG_CHECKING(for experimental linux async mode) +- if test "$withval" != "no"; then +- ENABLE_ASYNC_MODE=1 +- CFLAGS="$CFLAGS -DLIBFTDI_LINUX_ASYNC_MODE" +- AC_MSG_RESULT(yes) +- else +- AC_MSG_RESULT(no) +- fi +-]) +-AC_SUBST(ENABLE_ASYNC_MODE) +- +-dnl check for doxygen +-AC_PATH_PROG(DOXYGEN, doxygen) +-AM_CONDITIONAL(HAVE_DOXYGEN, test -n $DOXYGEN) +- +-AC_OUTPUT([libftdi-config],[chmod a+x libftdi-config]) +-AC_OUTPUT(Makefile src/Makefile examples/Makefile doc/Doxyfile doc/Makefile libftdi.pc libftdi.spec) +Index: libftdi-0.13/m4/async.m4 +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ libftdi-0.13/m4/async.m4 2008-07-18 14:35:52.710117546 +0200 +@@ -0,0 +1,17 @@ ++AC_DEFUN([AC_CHECK_ENABLE_ASYNC_MODE],[ ++AC_MSG_CHECKING([whether to compile with async-mode]) ++ENABLE_ASYNC_MODE=0 ++AC_ARG_WITH(async-mode, ++[ --with-async-mode enable experimental async mode. Linux only.], ++[ ++ AC_MSG_CHECKING(for experimental linux async mode) ++ if test "$withval" != "no"; then ++ ENABLE_ASYNC_MODE=1 ++ CFLAGS="$CFLAGS -DLIBFTDI_LINUX_ASYNC_MODE" ++ AC_MSG_RESULT(yes) ++ else ++ AC_MSG_RESULT(no) ++ fi ++]) ++AC_SUBST(ENABLE_ASYNC_MODE) ++]) +Index: libftdi-0.13/m4/doxygen.m4 +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ libftdi-0.13/m4/doxygen.m4 2008-07-18 14:35:52.710117546 +0200 +@@ -0,0 +1,11 @@ ++AC_DEFUN([AC_CHECK_ENABLE_DOCS],[ ++AC_MSG_CHECKING([whether to compile the docs]) ++AC_ARG_ENABLE([docs], ++[ --enable-docs Turn on debugging], ++[case "${enableval}" in ++ yes) AC_PATH_PROG(DOXYGEN, doxygen);; ++ no) ;; ++ *) AC_MSG_ERROR([bad value ${enableval} for --enable-docs]) ;; ++esac],[DOXYGEN=""]) ++AM_CONDITIONAL([HAVE_DOXYGEN], [test -n $DOXYGENx]) ++]) +Index: libftdi-0.13/Makefile.am +=================================================================== +--- libftdi-0.13.orig/Makefile.am 2008-06-13 10:28:54.000000000 +0200 ++++ libftdi-0.13/Makefile.am 2008-07-18 14:36:25.160089170 +0200 +@@ -2,7 +2,9 @@ + # have all needed files, that a GNU package needs + AUTOMAKE_OPTIONS = foreign 1.4 + +-SUBDIRS = src examples doc ++ACLOCAL_AMFLAGS = -I m4 ++ ++SUBDIRS = src doc + + EXTRA_DIST = libftdi.spec libftdi.spec.in COPYING.LIB README AUTHORS ChangeLog libftdi-config.in + +Index: libftdi-0.13/m4/lib-link.m4 +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ libftdi-0.13/m4/lib-link.m4 2008-07-18 14:35:52.713438346 +0200 +@@ -0,0 +1,709 @@ ++# lib-link.m4 serial 13 (gettext-0.17) ++dnl Copyright (C) 2001-2007 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++ ++dnl From Bruno Haible. ++ ++AC_PREREQ(2.54) ++ ++dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and ++dnl the libraries corresponding to explicit and implicit dependencies. ++dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and ++dnl augments the CPPFLAGS variable. ++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname ++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_LINKFLAGS], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ define([Name],[translit([$1],[./-], [___])]) ++ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) ++ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ ++ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ++ ac_cv_lib[]Name[]_libs="$LIB[]NAME" ++ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ++ ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ++ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" ++ ]) ++ LIB[]NAME="$ac_cv_lib[]Name[]_libs" ++ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" ++ INC[]NAME="$ac_cv_lib[]Name[]_cppflags" ++ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) ++ AC_SUBST([LIB]NAME) ++ AC_SUBST([LTLIB]NAME) ++ AC_SUBST([LIB]NAME[_PREFIX]) ++ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the ++ dnl results of this search when this library appears as a dependency. ++ HAVE_LIB[]NAME=yes ++ undefine([Name]) ++ undefine([NAME]) ++]) ++ ++dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) ++dnl searches for libname and the libraries corresponding to explicit and ++dnl implicit dependencies, together with the specified include files and ++dnl the ability to compile and link the specified testcode. If found, it ++dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and ++dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and ++dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs ++dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. ++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname ++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) ++ AC_REQUIRE([AC_LIB_RPATH]) ++ define([Name],[translit([$1],[./-], [___])]) ++ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) ++ ++ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME ++ dnl accordingly. ++ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ++ ++ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, ++ dnl because if the user has installed lib[]Name and not disabled its use ++ dnl via --without-lib[]Name-prefix, he wants to use it. ++ ac_save_CPPFLAGS="$CPPFLAGS" ++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) ++ ++ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ++ ac_save_LIBS="$LIBS" ++ LIBS="$LIBS $LIB[]NAME" ++ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) ++ LIBS="$ac_save_LIBS" ++ ]) ++ if test "$ac_cv_lib[]Name" = yes; then ++ HAVE_LIB[]NAME=yes ++ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) ++ AC_MSG_CHECKING([how to link with lib[]$1]) ++ AC_MSG_RESULT([$LIB[]NAME]) ++ else ++ HAVE_LIB[]NAME=no ++ dnl If $LIB[]NAME didn't lead to a usable library, we don't need ++ dnl $INC[]NAME either. ++ CPPFLAGS="$ac_save_CPPFLAGS" ++ LIB[]NAME= ++ LTLIB[]NAME= ++ LIB[]NAME[]_PREFIX= ++ fi ++ AC_SUBST([HAVE_LIB]NAME) ++ AC_SUBST([LIB]NAME) ++ AC_SUBST([LTLIB]NAME) ++ AC_SUBST([LIB]NAME[_PREFIX]) ++ undefine([Name]) ++ undefine([NAME]) ++]) ++ ++dnl Determine the platform dependent parameters needed to use rpath: ++dnl acl_libext, ++dnl acl_shlibext, ++dnl acl_hardcode_libdir_flag_spec, ++dnl acl_hardcode_libdir_separator, ++dnl acl_hardcode_direct, ++dnl acl_hardcode_minus_L. ++AC_DEFUN([AC_LIB_RPATH], ++[ ++ dnl Tell automake >= 1.10 to complain if config.rpath is missing. ++ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) ++ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS ++ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld ++ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host ++ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir ++ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ ++ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ++ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh ++ . ./conftest.sh ++ rm -f ./conftest.sh ++ acl_cv_rpath=done ++ ]) ++ wl="$acl_cv_wl" ++ acl_libext="$acl_cv_libext" ++ acl_shlibext="$acl_cv_shlibext" ++ acl_libname_spec="$acl_cv_libname_spec" ++ acl_library_names_spec="$acl_cv_library_names_spec" ++ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" ++ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" ++ acl_hardcode_direct="$acl_cv_hardcode_direct" ++ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" ++ dnl Determine whether the user wants rpath handling at all. ++ AC_ARG_ENABLE(rpath, ++ [ --disable-rpath do not hardcode runtime library paths], ++ :, enable_rpath=yes) ++]) ++ ++dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and ++dnl the libraries corresponding to explicit and implicit dependencies. ++dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. ++dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found ++dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. ++AC_DEFUN([AC_LIB_LINKFLAGS_BODY], ++[ ++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) ++ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], ++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) ++ dnl Autoconf >= 2.61 supports dots in --with options. ++ define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])]) ++ dnl By default, look in $includedir and $libdir. ++ use_additional=yes ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix], ++[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib ++ --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir], ++[ ++ if test "X$withval" = "Xno"; then ++ use_additional=no ++ else ++ if test "X$withval" = "X"; then ++ AC_LIB_WITH_FINAL_PREFIX([ ++ eval additional_includedir=\"$includedir\" ++ eval additional_libdir=\"$libdir\" ++ ]) ++ else ++ additional_includedir="$withval/include" ++ additional_libdir="$withval/$acl_libdirstem" ++ fi ++ fi ++]) ++ dnl Search the library and its dependencies in $additional_libdir and ++ dnl $LDFLAGS. Using breadth-first-seach. ++ LIB[]NAME= ++ LTLIB[]NAME= ++ INC[]NAME= ++ LIB[]NAME[]_PREFIX= ++ rpathdirs= ++ ltrpathdirs= ++ names_already_handled= ++ names_next_round='$1 $2' ++ while test -n "$names_next_round"; do ++ names_this_round="$names_next_round" ++ names_next_round= ++ for name in $names_this_round; do ++ already_handled= ++ for n in $names_already_handled; do ++ if test "$n" = "$name"; then ++ already_handled=yes ++ break ++ fi ++ done ++ if test -z "$already_handled"; then ++ names_already_handled="$names_already_handled $name" ++ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS ++ dnl or AC_LIB_HAVE_LINKFLAGS call. ++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` ++ eval value=\"\$HAVE_LIB$uppername\" ++ if test -n "$value"; then ++ if test "$value" = yes; then ++ eval value=\"\$LIB$uppername\" ++ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" ++ eval value=\"\$LTLIB$uppername\" ++ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" ++ else ++ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined ++ dnl that this library doesn't exist. So just drop it. ++ : ++ fi ++ else ++ dnl Search the library lib$name in $additional_libdir and $LDFLAGS ++ dnl and the already constructed $LIBNAME/$LTLIBNAME. ++ found_dir= ++ found_la= ++ found_so= ++ found_a= ++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name ++ if test -n "$acl_shlibext"; then ++ shrext=".$acl_shlibext" # typically: shrext=.so ++ else ++ shrext= ++ fi ++ if test $use_additional = yes; then ++ dir="$additional_libdir" ++ dnl The same code as in the loop below: ++ dnl First look for a shared library. ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ dnl Then look for a static library. ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ fi ++ if test "X$found_dir" = "X"; then ++ for x in $LDFLAGS $LTLIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ case "$x" in ++ -L*) ++ dir=`echo "X$x" | sed -e 's/^X-L//'` ++ dnl First look for a shared library. ++ if test -n "$acl_shlibext"; then ++ if test -f "$dir/$libname$shrext"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext" ++ else ++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ++ ver=`(cd "$dir" && \ ++ for f in "$libname$shrext".*; do echo "$f"; done \ ++ | sed -e "s,^$libname$shrext\\\\.,," \ ++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ ++ | sed 1q ) 2>/dev/null` ++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then ++ found_dir="$dir" ++ found_so="$dir/$libname$shrext.$ver" ++ fi ++ else ++ eval library_names=\"$acl_library_names_spec\" ++ for f in $library_names; do ++ if test -f "$dir/$f"; then ++ found_dir="$dir" ++ found_so="$dir/$f" ++ break ++ fi ++ done ++ fi ++ fi ++ fi ++ dnl Then look for a static library. ++ if test "X$found_dir" = "X"; then ++ if test -f "$dir/$libname.$acl_libext"; then ++ found_dir="$dir" ++ found_a="$dir/$libname.$acl_libext" ++ fi ++ fi ++ if test "X$found_dir" != "X"; then ++ if test -f "$dir/$libname.la"; then ++ found_la="$dir/$libname.la" ++ fi ++ fi ++ ;; ++ esac ++ if test "X$found_dir" != "X"; then ++ break ++ fi ++ done ++ fi ++ if test "X$found_dir" != "X"; then ++ dnl Found the library. ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" ++ if test "X$found_so" != "X"; then ++ dnl Linking with a shared library. We attempt to hardcode its ++ dnl directory into the executable's runpath, unless it's the ++ dnl standard /usr/lib. ++ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then ++ dnl No hardcoding is needed. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ dnl Use an explicit option to hardcode DIR into the resulting ++ dnl binary. ++ dnl Potentially add DIR to ltrpathdirs. ++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $found_dir" ++ fi ++ dnl The hardcoding into $LIBNAME is system dependent. ++ if test "$acl_hardcode_direct" = yes; then ++ dnl Using DIR/libNAME.so during linking hardcodes DIR into the ++ dnl resulting binary. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ dnl Use an explicit option to hardcode DIR into the resulting ++ dnl binary. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ dnl Potentially add DIR to rpathdirs. ++ dnl The rpathdirs will be appended to $LIBNAME at the end. ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $found_dir" ++ fi ++ else ++ dnl Rely on "-L$found_dir". ++ dnl But don't add it if it's already contained in the LDFLAGS ++ dnl or the already constructed $LIBNAME ++ haveit= ++ for x in $LDFLAGS $LIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$found_dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" ++ fi ++ if test "$acl_hardcode_minus_L" != no; then ++ dnl FIXME: Not sure whether we should use ++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" ++ dnl here. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" ++ else ++ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH ++ dnl here, because this doesn't fit in flags passed to the ++ dnl compiler. So give up. No hardcoding. This affects only ++ dnl very old systems. ++ dnl FIXME: Not sure whether we should use ++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" ++ dnl here. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" ++ fi ++ fi ++ fi ++ fi ++ else ++ if test "X$found_a" != "X"; then ++ dnl Linking with a static library. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" ++ else ++ dnl We shouldn't come here, but anyway it's good to have a ++ dnl fallback. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" ++ fi ++ fi ++ dnl Assume the include files are nearby. ++ additional_includedir= ++ case "$found_dir" in ++ */$acl_libdirstem | */$acl_libdirstem/) ++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` ++ LIB[]NAME[]_PREFIX="$basedir" ++ additional_includedir="$basedir/include" ++ ;; ++ esac ++ if test "X$additional_includedir" != "X"; then ++ dnl Potentially add $additional_includedir to $INCNAME. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/include, ++ dnl 2. if it's /usr/local/include and we are using GCC on Linux, ++ dnl 3. if it's already present in $CPPFLAGS or the already ++ dnl constructed $INCNAME, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_includedir" != "X/usr/include"; then ++ haveit= ++ if test "X$additional_includedir" = "X/usr/local/include"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ for x in $CPPFLAGS $INC[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-I$additional_includedir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_includedir"; then ++ dnl Really add $additional_includedir to $INCNAME. ++ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" ++ fi ++ fi ++ fi ++ fi ++ fi ++ dnl Look for dependencies. ++ if test -n "$found_la"; then ++ dnl Read the .la file. It defines the variables ++ dnl dlname, library_names, old_library, dependency_libs, current, ++ dnl age, revision, installed, dlopen, dlpreopen, libdir. ++ save_libdir="$libdir" ++ case "$found_la" in ++ */* | *\\*) . "$found_la" ;; ++ *) . "./$found_la" ;; ++ esac ++ libdir="$save_libdir" ++ dnl We use only dependency_libs. ++ for dep in $dependency_libs; do ++ case "$dep" in ++ -L*) ++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` ++ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. ++ dnl But don't add it ++ dnl 1. if it's the standard /usr/lib, ++ dnl 2. if it's /usr/local/lib and we are using GCC on Linux, ++ dnl 3. if it's already present in $LDFLAGS or the already ++ dnl constructed $LIBNAME, ++ dnl 4. if it doesn't exist as a directory. ++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then ++ haveit= ++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then ++ if test -n "$GCC"; then ++ case $host_os in ++ linux* | gnu* | k*bsd*-gnu) haveit=yes;; ++ esac ++ fi ++ fi ++ if test -z "$haveit"; then ++ haveit= ++ for x in $LDFLAGS $LIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ dnl Really add $additional_libdir to $LIBNAME. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" ++ fi ++ fi ++ haveit= ++ for x in $LDFLAGS $LTLIB[]NAME; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X-L$additional_libdir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ if test -d "$additional_libdir"; then ++ dnl Really add $additional_libdir to $LTLIBNAME. ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" ++ fi ++ fi ++ fi ++ fi ++ ;; ++ -R*) ++ dir=`echo "X$dep" | sed -e 's/^X-R//'` ++ if test "$enable_rpath" != no; then ++ dnl Potentially add DIR to rpathdirs. ++ dnl The rpathdirs will be appended to $LIBNAME at the end. ++ haveit= ++ for x in $rpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ dnl Potentially add DIR to ltrpathdirs. ++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. ++ haveit= ++ for x in $ltrpathdirs; do ++ if test "X$x" = "X$dir"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ ltrpathdirs="$ltrpathdirs $dir" ++ fi ++ fi ++ ;; ++ -l*) ++ dnl Handle this in the next round. ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ++ ;; ++ *.la) ++ dnl Handle this in the next round. Throw away the .la's ++ dnl directory; it is already contained in a preceding -L ++ dnl option. ++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ++ ;; ++ *) ++ dnl Most likely an immediate library name. ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ++ ;; ++ esac ++ done ++ fi ++ else ++ dnl Didn't find the library; assume it is in the system directories ++ dnl known to the linker and runtime loader. (All the system ++ dnl directories known to the linker should also be known to the ++ dnl runtime loader, otherwise the system is severely misconfigured.) ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" ++ fi ++ fi ++ fi ++ done ++ done ++ if test "X$rpathdirs" != "X"; then ++ if test -n "$acl_hardcode_libdir_separator"; then ++ dnl Weird platform: only the last -rpath option counts, the user must ++ dnl pass all path elements in one option. We can arrange that for a ++ dnl single library, but not when more than one $LIBNAMEs are used. ++ alldirs= ++ for found_dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" ++ done ++ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" ++ else ++ dnl The -rpath options are cumulative. ++ for found_dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$found_dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" ++ done ++ fi ++ fi ++ if test "X$ltrpathdirs" != "X"; then ++ dnl When using libtool, the option that works for both libraries and ++ dnl executables is -R. The -R options are cumulative. ++ for found_dir in $ltrpathdirs; do ++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" ++ done ++ fi ++]) ++ ++dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, ++dnl unless already present in VAR. ++dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes ++dnl contains two or three consecutive elements that belong together. ++AC_DEFUN([AC_LIB_APPENDTOVAR], ++[ ++ for element in [$2]; do ++ haveit= ++ for x in $[$1]; do ++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) ++ if test "X$x" = "X$element"; then ++ haveit=yes ++ break ++ fi ++ done ++ if test -z "$haveit"; then ++ [$1]="${[$1]}${[$1]:+ }$element" ++ fi ++ done ++]) ++ ++dnl For those cases where a variable contains several -L and -l options ++dnl referring to unknown libraries and directories, this macro determines the ++dnl necessary additional linker options for the runtime path. ++dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) ++dnl sets LDADDVAR to linker options needed together with LIBSVALUE. ++dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, ++dnl otherwise linking without libtool is assumed. ++AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], ++[ ++ AC_REQUIRE([AC_LIB_RPATH]) ++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) ++ $1= ++ if test "$enable_rpath" != no; then ++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then ++ dnl Use an explicit option to hardcode directories into the resulting ++ dnl binary. ++ rpathdirs= ++ next= ++ for opt in $2; do ++ if test -n "$next"; then ++ dir="$next" ++ dnl No need to hardcode the standard /usr/lib. ++ if test "X$dir" != "X/usr/$acl_libdirstem"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ next= ++ else ++ case $opt in ++ -L) next=yes ;; ++ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` ++ dnl No need to hardcode the standard /usr/lib. ++ if test "X$dir" != "X/usr/$acl_libdirstem"; then ++ rpathdirs="$rpathdirs $dir" ++ fi ++ next= ;; ++ *) next= ;; ++ esac ++ fi ++ done ++ if test "X$rpathdirs" != "X"; then ++ if test -n ""$3""; then ++ dnl libtool is used for linking. Use -R options. ++ for dir in $rpathdirs; do ++ $1="${$1}${$1:+ }-R$dir" ++ done ++ else ++ dnl The linker is used for linking directly. ++ if test -n "$acl_hardcode_libdir_separator"; then ++ dnl Weird platform: only the last -rpath option counts, the user ++ dnl must pass all path elements in one option. ++ alldirs= ++ for dir in $rpathdirs; do ++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" ++ done ++ acl_save_libdir="$libdir" ++ libdir="$alldirs" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ $1="$flag" ++ else ++ dnl The -rpath options are cumulative. ++ for dir in $rpathdirs; do ++ acl_save_libdir="$libdir" ++ libdir="$dir" ++ eval flag=\"$acl_hardcode_libdir_flag_spec\" ++ libdir="$acl_save_libdir" ++ $1="${$1}${$1:+ }$flag" ++ done ++ fi ++ fi ++ fi ++ fi ++ fi ++ AC_SUBST([$1]) ++]) +Index: libftdi-0.13/src/Makefile.am +=================================================================== +--- libftdi-0.13.orig/src/Makefile.am 2008-06-13 10:28:53.000000000 +0200 ++++ libftdi-0.13/src/Makefile.am 2008-07-18 14:35:52.713438346 +0200 +@@ -10,4 +10,4 @@ + # Note: If you specify a:b:c as the version in the next line, + # the library that is made has version (a-c).c.b. In this + # example, the version is 2.1.2. (3:2:1) +-libftdi_la_LDFLAGS = -version-info 14:0:13 $(all_libraries) ++libftdi_la_LDFLAGS = -version-info 14:0:13 $(all_libraries) @LIBUSB_LIBS@ diff --git a/recipes/libftdi/files/doxygen-configure.patch b/recipes/libftdi/files/doxygen-configure.patch new file mode 100644 index 0000000000..150acb67d5 --- /dev/null +++ b/recipes/libftdi/files/doxygen-configure.patch @@ -0,0 +1,28 @@ +Index: libftdi-0.9/configure.in +=================================================================== +--- libftdi-0.9.orig/configure.in ++++ libftdi-0.9/configure.in +@@ -32,9 +32,5 @@ else + AC_MSG_RESULT(yes) + fi + +-dnl check for doxygen +-AC_PATH_PROG(DOXYGEN, doxygen) +-AM_CONDITIONAL(HAVE_DOXYGEN, test -n $DOXYGEN); +- + AC_OUTPUT([libftdi-config],[chmod a+x libftdi-config]) +-AC_OUTPUT(Makefile src/Makefile examples/Makefile doc/Doxyfile doc/Makefile libftdi.pc) ++AC_OUTPUT(Makefile src/Makefile examples/Makefile libftdi.pc) +Index: libftdi-0.9/Makefile.am +=================================================================== +--- libftdi-0.9.orig/Makefile.am ++++ libftdi-0.9/Makefile.am +@@ -2,7 +2,7 @@ + # have all needed files, that a GNU package needs + AUTOMAKE_OPTIONS = foreign 1.4 + +-SUBDIRS = src examples doc ++SUBDIRS = src examples + + EXTRA_DIST = libftdi.spec COPYING.LIB README ChangeLog libftdi-config.in + diff --git a/recipes/libftdi/files/ftdi_eeprom-0.2-moko.patch b/recipes/libftdi/files/ftdi_eeprom-0.2-moko.patch new file mode 100644 index 0000000000..ae0ee6235a --- /dev/null +++ b/recipes/libftdi/files/ftdi_eeprom-0.2-moko.patch @@ -0,0 +1,16 @@ +--- ftdi_eeprom-0.2/ftdi_eeprom/main.c 2004-03-25 19:58:08.000000000 +0100 ++++ ftdi_eeprom-0.2-moko/ftdi_eeprom/main.c 2007-02-16 01:23:40.000000000 +0100 +@@ -135,8 +135,11 @@ + + i = ftdi_usb_open(&ftdi, 0x0403, 0x6001); + if (i != 0) { +- printf("Sorry, unable to find FTDI USB chip\n"); +- exit (-1); ++ i = ftdi_usb_open(&ftdi, 0x0403, 0x6010); ++ if (i != 0) { ++ printf("Sorry, unable to find FTDI USB chip\n"); ++ exit (-1); ++ } + } + } + } diff --git a/recipes/libftdi/ftdi-eeprom-native_0.2.bb b/recipes/libftdi/ftdi-eeprom-native_0.2.bb new file mode 100644 index 0000000000..56613969d9 --- /dev/null +++ b/recipes/libftdi/ftdi-eeprom-native_0.2.bb @@ -0,0 +1,9 @@ +require ftdi-eeprom_${PV}.bb + +DEPENDS = "libftdi-native confuse-native" + +do_stage() { + install -d ${STAGING_BINDIR_NATIVE} + install -m 0755 ftdi_eeprom/ftdi_eeprom ${STAGING_BINDIR_NATIVE}/ +} + diff --git a/recipes/libftdi/ftdi-eeprom_0.2.bb b/recipes/libftdi/ftdi-eeprom_0.2.bb new file mode 100644 index 0000000000..c71ac8d0c3 --- /dev/null +++ b/recipes/libftdi/ftdi-eeprom_0.2.bb @@ -0,0 +1,13 @@ +DESCRIPTION = "ftdi-eeprom is a flashing utility for FTDI chips." +HOMEPAGE = "http://www.intra2net.com/de/produkte/opensource/ftdi" +LICENSE = "GPL" +DEPENDS = "libftdi confuse" +PR = "r1" + +SRC_URI = "http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/ftdi_eeprom-${PV}.tar.gz \ + file://ftdi_eeprom-0.2-moko.patch;patch=1" +S = "${WORKDIR}/ftdi_eeprom-${PV}" + +inherit autotools + +EXTRA_OECONF = "--disable-docs" diff --git a/recipes/libftdi/libftdi-native_0.13.bb b/recipes/libftdi/libftdi-native_0.13.bb new file mode 100644 index 0000000000..24f82778e5 --- /dev/null +++ b/recipes/libftdi/libftdi-native_0.13.bb @@ -0,0 +1,5 @@ +require libftdi_${PV}.bb + +inherit native + +DEPENDS = "libusb-native" diff --git a/recipes/libftdi/libftdi-native_0.9.bb b/recipes/libftdi/libftdi-native_0.9.bb new file mode 100644 index 0000000000..24f82778e5 --- /dev/null +++ b/recipes/libftdi/libftdi-native_0.9.bb @@ -0,0 +1,5 @@ +require libftdi_${PV}.bb + +inherit native + +DEPENDS = "libusb-native" diff --git a/recipes/libftdi/libftdi_0.13.bb b/recipes/libftdi/libftdi_0.13.bb new file mode 100644 index 0000000000..3e787ca512 --- /dev/null +++ b/recipes/libftdi/libftdi_0.13.bb @@ -0,0 +1,20 @@ +DESCRIPTION = "libftdi is a library to talk to FTDI chips.\ +FT232BM/245BM, FT2232C/D and FT232/245R using libusb,\ +including the popular bitbang mode." +HOMEPAGE = "http://www.intra2net.com/de/produkte/opensource/ftdi/" +LICENSE = "LGPL" +SECTION = "libs" + +DEPENDS = "libusb" + +SRC_URI = "http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${PV}.tar.gz \ + file://autotools.patch;patch=1 \ + " + +inherit autotools binconfig pkgconfig + +EXTRA_OECONF += "--disable-rpath" + +do_stage() { + autotools_stage_all +} diff --git a/recipes/libftdi/libftdi_0.9.bb b/recipes/libftdi/libftdi_0.9.bb new file mode 100644 index 0000000000..f7426ceb1a --- /dev/null +++ b/recipes/libftdi/libftdi_0.9.bb @@ -0,0 +1,17 @@ +DESCRIPTION = "libftdi is a library (using libusb) to talk to FTDI's \ +FT232BM, FT245BM and FT2232C type chips including the popular bitbang mode." +HOMEPAGE = "http://www.intra2net.com/de/produkte/opensource/ftdi" +LICENSE = "GPL" +DEPENDS = "libusb" + +SRC_URI = "http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${PV}.tar.gz \ + file://doxygen-configure.patch;patch=1" +S = "${WORKDIR}/libftdi-${PV}" + +inherit autotools + +EXTRA_OECONF = "--disable-docs" + +do_stage() { + autotools_stage_all +} -- cgit 1.2.3-korg