linux-2.6.39: Add at91 support

Signed-off-by: Ulf Samuelsson <ulf_samuelsson@telia.com>

29 files changed, 100210 insertions, 3 deletions

diff --git a/recipes/linux/linux-2.6.39.2/at572d940hfek/defconfig b/recipes/linux/linux-2.6.39.2/at572d940hfek/defconfig
new file mode 100644
index 0000000000..1b1158ae8f
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at572d940hfek/defconfig
@@ -0,0 +1,358 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_MACH_AT572D940HFEB=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+CONFIG_NET=y
+CONFIG_PACKET=m
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTD_BLOCK2MTD=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_SSC=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_RAW=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+CONFIG_SPECIALIX=m
+CONFIG_STALDRV=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_USB_HID=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_TEST=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_MMC=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_AT91=m
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1305=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_INOTIFY=y
+CONFIG_FUSE_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_CRAMFS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
diff --git a/recipes/linux/linux-2.6.39.2/at91/0001-Support-configurable-NAND-partitions-for-Atmel-at91-.patch b/recipes/linux/linux-2.6.39.2/at91/0001-Support-configurable-NAND-partitions-for-Atmel-at91-.patch
new file mode 100644
index 0000000000..a754638842
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/0001-Support-configurable-NAND-partitions-for-Atmel-at91-.patch
@@ -0,0 +1,403 @@
+From 4f229b86469496fd0532c34cc91892e923d7d3de Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf_samuelsson@telia.com>
+Date: Sun, 30 Oct 2011 12:41:29 +0100
+Subject: [PATCH 1/3] Support configurable NAND partitions for Atmel at91
+ boards
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@telia.com>
+---
+ arch/arm/mach-at91/Kconfig                |   29 +++++++++++++++++++++++++++++
+ arch/arm/mach-at91/board-at572d940hf_ek.c |   21 +++++++++------------
+ arch/arm/mach-at91/board-cap9adk.c        |   14 ++++++++++++--
+ arch/arm/mach-at91/board-rm9200dk.c       |   14 ++++++++++++--
+ arch/arm/mach-at91/board-sam9260ek.c      |   13 +++++++++----
+ arch/arm/mach-at91/board-sam9261ek.c      |   13 +++++++++----
+ arch/arm/mach-at91/board-sam9263ek.c      |   13 +++++++++----
+ arch/arm/mach-at91/board-sam9g20ek.c      |    6 +++---
+ arch/arm/mach-at91/board-sam9m10g45ek.c   |   13 +++++++++----
+ arch/arm/mach-at91/board-sam9rlek.c       |   13 +++++++++----
+ arch/arm/mach-at91/board-sam9x5cm.c       |   13 +++++++++----
+ 11 files changed, 119 insertions(+), 43 deletions(-)
+
+diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
+index b5d29ef..42a7283 100644
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -122,6 +122,7 @@ config MACH_ONEARM
+ config ARCH_AT91RM9200DK
+ 	bool "Atmel AT91RM9200-DK Development board"
+ 	select HAVE_AT91_DATAFLASH_CARD
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+ 	  (Discontinued)
+@@ -217,6 +218,7 @@ config MACH_AT91SAM9260EK
+ 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+@@ -278,6 +280,7 @@ config MACH_AT91SAM9261EK
+ 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+@@ -294,6 +297,7 @@ config MACH_AT91SAM9G10EK
+ 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+@@ -310,6 +314,7 @@ config MACH_AT91SAM9263EK
+ 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+@@ -336,6 +341,7 @@ comment "AT91SAM9RL Board Type"
+ 
+ config MACH_AT91SAM9RLEK
+ 	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+ 
+@@ -351,6 +357,7 @@ config MACH_AT91SAM9G20EK
+ 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ 	  that embeds only one SD/MMC slot.
+@@ -359,6 +366,7 @@ config MACH_AT91SAM9G20EK_2MMC
+ 	depends on MACH_AT91SAM9G20EK
+ 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+@@ -424,6 +432,7 @@ comment "AT91SAM9G45 Board Type"
+ config MACH_AT91SAM9M10G45EK
+ 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ 	  "ES" at the end of the name means that this board is an
+@@ -439,6 +448,7 @@ comment "AT91SAM9x5 Series Board Type"
+ 
+ config MACH_AT91SAM9X5EK
+ 	bool "Atmel AT91SAM9x5 Series Evaluation Kit"
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you re using Atmel's AT91SAM9x5-EK Evaluation Kit.
+ 	  Supported chips are sam9g15, sam9g25, sam9x25, sam9g35 and sam9x35.
+@@ -455,6 +465,7 @@ config MACH_AT91CAP9ADK
+ 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ 	select HAVE_AT91_DATAFLASH_CARD
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
++	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+ 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+@@ -511,6 +522,24 @@ config MTD_NAND_ATMEL_BUSWIDTH_16
+ 	  On AT91SAM926x boards both types of NAND flash can be present
+ 	  (8 and 16 bit data bus width).
+ 
++config MTD_NAND_ATMEL_ROOTFS_SIZE
++	int "Size NAND rootfs in MB"
++	range 8 250
++	depends on MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++	default "124"
++	help
++	  Many Atmel development boards has a NAND Flash, 
++	  divided into three partitions.
++          1) Boot partition (4 MB)
++	  2) Root FS
++	  3) Data partition
++	  This allows you to configure the size of the root fs
++	  with the remainder ending up in the data partition.
++	  The legal values are between 8 and 250
++
++config MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++	bool
++
+ # ----------------------------------------------------------
+ 
+ comment "AT91 Feature Selections"
+diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
+index 3929f1c..d737aa8 100644
+--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
++++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
+@@ -115,22 +115,19 @@ static struct at91_eth_data __initdata eb_eth_data = {
+ 
+ static struct mtd_partition eb_nor_partitions[] = {
+ 	{
+-		.name		= "Raw Environment",
+-		.offset		= 0,
+-		.size		= SZ_4M,
+-		.mask_flags	= 0,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name		= "OS FS",
+-		.offset		= MTDPART_OFS_APPEND,
+-		.size		= 3 * SZ_1M,
+-		.mask_flags	= 0,
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
+ 	},
+ 	{
+-		.name		= "APP FS",
+-		.offset		= MTDPART_OFS_APPEND,
+-		.size		= MTDPART_SIZ_FULL,
+-		.mask_flags	= 0,
++		.name	= "Data",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
+ 	},
+ };
+ 
+diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
+index 017c7f4..7936339 100644
+--- a/arch/arm/mach-at91/board-cap9adk.c
++++ b/arch/arm/mach-at91/board-cap9adk.c
+@@ -169,8 +169,18 @@ static struct at91_eth_data __initdata cap9adk_macb_data = {
+  */
+ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
+ 	{
+-		.name	= "NAND partition",
+-		.offset	= 0,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
++	},
++	{
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
++		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+ };
+diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
+index 4c1047c..825996e 100644
+--- a/arch/arm/mach-at91/board-rm9200dk.c
++++ b/arch/arm/mach-at91/board-rm9200dk.c
+@@ -137,8 +137,18 @@ static struct i2c_board_info __initdata dk_i2c_devices[] = {
+ 
+ static struct mtd_partition __initdata dk_nand_partition[] = {
+ 	{
+-		.name	= "NAND Partition 1",
+-		.offset	= 0,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
++	},
++	{
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
++		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+ };
+diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
+index de1816e..ec2a7ed 100644
+--- a/arch/arm/mach-at91/board-sam9260ek.c
++++ b/arch/arm/mach-at91/board-sam9260ek.c
+@@ -167,12 +167,17 @@ static struct at91_eth_data __initdata ek_macb_data = {
+  */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_256K,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
+index b737e59..b28d900 100644
+--- a/arch/arm/mach-at91/board-sam9261ek.c
++++ b/arch/arm/mach-at91/board-sam9261ek.c
+@@ -174,12 +174,17 @@ static struct at91_udc_data __initdata ek_udc_data = {
+  */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_256K,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
+index 3640554..279800e 100644
+--- a/arch/arm/mach-at91/board-sam9263ek.c
++++ b/arch/arm/mach-at91/board-sam9263ek.c
+@@ -175,12 +175,17 @@ static struct at91_eth_data __initdata ek_macb_data = {
+  */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_64M,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
+index ca8198b..7e110e1 100644
+--- a/arch/arm/mach-at91/board-sam9g20ek.c
++++ b/arch/arm/mach-at91/board-sam9g20ek.c
+@@ -151,12 +151,12 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 1",
++		.name	= "Root File System",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+-		.size	= 60 * SZ_1M,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
+index 6fb7ce9..5f0f6f5 100644
+--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
++++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
+@@ -135,12 +135,17 @@ static struct at91_eth_data __initdata ek_macb_data = {
+  */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_64M,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
+index 721186f..cd3dae4 100644
+--- a/arch/arm/mach-at91/board-sam9rlek.c
++++ b/arch/arm/mach-at91/board-sam9rlek.c
+@@ -84,12 +84,17 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
+  */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_256K,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++	},
++	{
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+diff --git a/arch/arm/mach-at91/board-sam9x5cm.c b/arch/arm/mach-at91/board-sam9x5cm.c
+index a5f8f3d..82797a0 100644
+--- a/arch/arm/mach-at91/board-sam9x5cm.c
++++ b/arch/arm/mach-at91/board-sam9x5cm.c
+@@ -110,12 +110,17 @@ static struct spi_board_info cm_spi_devices[] = {
+  */
+ static struct mtd_partition __initdata cm_nand_partition[] = {
+ 	{
+-		.name	= "Partition 1",
+-		.offset	= 0,
+-		.size	= SZ_64M,
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
++	},
++	{
++		.name	= "Root File System",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
+ 	},
+ 	{
+-		.name	= "Partition 2",
++		.name	= "Data",
+ 		.offset	= MTDPART_OFS_NXTBLK,
+ 		.size	= MTDPART_SIZ_FULL,
+ 	},
+-- 
+1.7.5.4
+
diff --git a/recipes/linux/linux-2.6.39.2/at91/0002-at91-defconfigs-add-tmpfs-and-ubi.patch b/recipes/linux/linux-2.6.39.2/at91/0002-at91-defconfigs-add-tmpfs-and-ubi.patch
new file mode 100644
index 0000000000..75a53409b4
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/0002-at91-defconfigs-add-tmpfs-and-ubi.patch
@@ -0,0 +1,17866 @@
+From 8fcb4472a353f49ea4b875809e0fec769e3ef3ad Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf_samuelsson@telia.com>
+Date: Sun, 30 Oct 2011 13:21:25 +0100
+Subject: [PATCH 2/3] at91 defconfigs: add tmpfs and ubi
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@telia.com>
+---
+ arch/arm/configs/at91cap9adk_defconfig      | 1539 ++++++++++++++++++-
+ arch/arm/configs/at91rm9200_defconfig       | 1893 ++++++++++++++++++++++-
+ arch/arm/configs/at91sam9260ek_defconfig    | 1414 +++++++++++++++++-
+ arch/arm/configs/at91sam9261ek_defconfig    | 1620 +++++++++++++++++++-
+ arch/arm/configs/at91sam9263ek_defconfig    | 1549 +++++++++++++++++++-
+ arch/arm/configs/at91sam9g10ek_defconfig    | 1708 ++++++++++++++++++++
+ arch/arm/configs/at91sam9g20ek_defconfig    | 1460 +++++++++++++++++-
+ arch/arm/configs/at91sam9m10g45ek_defconfig | 2226 +++++++++++++++++++++++++++
+ arch/arm/configs/at91sam9rlek_defconfig     | 1280 +++++++++++++++-
+ arch/arm/configs/at91sam9x5ek_defconfig     | 1987 ++++++++++++++++++++++++-
+ arch/arm/mach-at91/Kconfig                  |    3 +-
+ 11 files changed, 16634 insertions(+), 45 deletions(-)
+ create mode 100644 arch/arm/configs/at91sam9g10ek_defconfig
+ create mode 100644 arch/arm/configs/at91sam9m10g45ek_defconfig
+
+diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
+index ffb1edd..84a059d 100644
+--- a/arch/arm/configs/at91cap9adk_defconfig
++++ b/arch/arm/configs/at91cap9adk_defconfig
+@@ -1,115 +1,1646 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:05:03 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
+ CONFIG_ARCH_AT91CAP9=y
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91CAP9 Board Type
++#
+ CONFIG_MACH_AT91CAP9ADK=y
++
++#
++# AT91 Board Options
++#
+ CONFIG_MTD_AT91_DATAFLASH_CARD=y
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_GPIO_PCA953X is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
+ CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_LEDS=y
+ CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
+ CONFIG_IP_PNP_BOOTP=y
+ CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
+ # CONFIG_INET_LRO is not set
+ # CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
+ CONFIG_MTD_CFI=y
+ CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
+ CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
++# CONFIG_MTD_PHYSMAP_COMPAT is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_IMPA7 is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
+ CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
+ CONFIG_NETDEVICES=y
+-CONFIG_NET_ETHERNET=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
+ CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
+ CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
+ CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
+ # CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++# CONFIG_AT91SAM9X_WATCHDOG is not set
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
+ CONFIG_LOGO=y
+ # CONFIG_LOGO_LINUX_MONO is not set
++CONFIG_LOGO_LINUX_VGA16=y
+ # CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
+ # CONFIG_USB_HID is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
+ CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_G_NCM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_AT91=m
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
+ CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
+ CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
+ CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_INFO_REDUCED is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
+ CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
+index 38cb7c9..747b989 100644
+--- a/arch/arm/configs/at91rm9200_defconfig
++++ b/arch/arm/configs/at91rm9200_defconfig
+@@ -1,20 +1,283 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:06:54 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_PREEMPT_RCU=y
++# CONFIG_TINY_RCU is not set
++# CONFIG_TINY_PREEMPT_RCU is not set
++CONFIG_PREEMPT_RCU=y
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+-CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++CONFIG_COMPAT_BRK=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ CONFIG_MODULE_FORCE_LOAD=y
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
+ CONFIG_MODVERSIONS=y
+ CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_DEADLINE=y
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_DEADLINE=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="deadline"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_SPIN_UNLOCK is not set
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_READ_UNLOCK is not set
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_WRITE_UNLOCK is not set
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_AT91_USART3=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91RM9200 Board Type
++#
+ CONFIG_MACH_ONEARM=y
+ CONFIG_ARCH_AT91RM9200DK=y
+ CONFIG_MACH_AT91RM9200EK=y
+@@ -29,158 +292,892 @@ CONFIG_MACH_ECBAT91=y
+ CONFIG_MACH_YL9200=y
+ CONFIG_MACH_CPUAT91=y
+ CONFIG_MACH_ECO920=y
++
++#
++# AT91 Board Options
++#
+ CONFIG_MTD_AT91_DATAFLASH_CARD=y
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
+ CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ CONFIG_PCCARD=y
++CONFIG_PCMCIA=y
++CONFIG_PCMCIA_LOAD_CIS=y
++
++#
++# PC-card bridges
++#
+ CONFIG_AT91_CF=y
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
+ CONFIG_PREEMPT=y
++CONFIG_HZ=100
+ CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_LEDS=y
+ CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x10000000
+ CONFIG_ZBOOT_ROM_BSS=0x20040000
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE=""
++# CONFIG_XIP_KERNEL is not set
+ CONFIG_KEXEC=y
++CONFIG_ATAGS_PROC=y
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
+ CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++CONFIG_XFRM=y
+ CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
+ CONFIG_NET_IPIP=m
+-CONFIG_NET_IPGRE=m
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
+ CONFIG_INET_AH=m
+ CONFIG_INET_ESP=m
+ CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
+ CONFIG_INET_XFRM_MODE_TRANSPORT=m
+ CONFIG_INET_XFRM_MODE_TUNNEL=m
+ CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_LRO=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
+ CONFIG_IPV6_PRIVACY=y
+ CONFIG_IPV6_ROUTER_PREF=y
+ CONFIG_IPV6_ROUTE_INFO=y
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+ CONFIG_INET6_AH=m
+ CONFIG_INET6_ESP=m
+ CONFIG_INET6_IPCOMP=m
+ CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
+ CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++# CONFIG_IPV6_SIT_6RD is not set
++CONFIG_IPV6_NDISC_NODETYPE=y
+ CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++CONFIG_STP=m
+ CONFIG_BRIDGE=m
++CONFIG_BRIDGE_IGMP_SNOOPING=y
++# CONFIG_NET_DSA is not set
+ CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++CONFIG_DNS_RESOLVER=y
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
+ CONFIG_BT=m
+-CONFIG_BT_L2CAP=m
+-CONFIG_BT_SCO=m
+-CONFIG_BT_RFCOMM=m
+-CONFIG_BT_RFCOMM_TTY=y
+-CONFIG_BT_BNEP=m
+-CONFIG_BT_BNEP_MC_FILTER=y
+-CONFIG_BT_BNEP_PROTO_FILTER=y
+-CONFIG_BT_HIDP=m
++# CONFIG_BT_L2CAP is not set
++# CONFIG_BT_SCO is not set
++
++#
++# Bluetooth device drivers
++#
++# CONFIG_BT_HCIBTUSB is not set
++# CONFIG_BT_HCIBTSDIO is not set
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIBCM203X is not set
++# CONFIG_BT_HCIBPA10X is not set
++# CONFIG_BT_HCIBFUSB is not set
++# CONFIG_BT_HCIDTL1 is not set
++# CONFIG_BT_HCIBT3C is not set
++# CONFIG_BT_HCIBLUECARD is not set
++# CONFIG_BT_HCIBTUART is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_BT_MRVL is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+-CONFIG_MTD_CONCAT=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ CONFIG_MTD_AFS_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
+ CONFIG_MTD_CFI=y
+ CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
+ CONFIG_MTD_CFI_INTELEXT=y
+ CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++CONFIG_MTD_RAM=y
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
+ CONFIG_MTD_COMPLEX_MAPPINGS=y
+ CONFIG_MTD_PHYSMAP=y
++# CONFIG_MTD_PHYSMAP_COMPAT is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_IMPA7 is not set
++# CONFIG_MTD_PCMCIA is not set
++# CONFIG_MTD_GPIO_ADDR is not set
+ CONFIG_MTD_PLATRAM=y
++# CONFIG_MTD_LATCH_ADDR is not set
++
++#
++# Self-contained MTD device drivers
++#
+ CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
+ CONFIG_MTD_NAND_PLATFORM=y
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
+ CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
+ CONFIG_MTD_UBI_GLUEBI=y
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
+ CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_TCLIB=y
+-CONFIG_EEPROM_LEGACY=m
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
+ CONFIG_BLK_DEV_SR=m
+ CONFIG_BLK_DEV_SR_VENDOR=y
+ CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
+ # CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
++# CONFIG_VETH is not set
++CONFIG_MII=y
+ CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
+ CONFIG_DAVICOM_PHY=y
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
+ CONFIG_SMSC_PHY=y
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
+ CONFIG_MICREL_PHY=y
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_ARM_AT91_ETHER=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_PCMCIA_RAYCS is not set
++# CONFIG_ATMEL is not set
++# CONFIG_AIRO_CS is not set
++# CONFIG_PCMCIA_WL3501 is not set
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
+ CONFIG_USB_CATC=m
+ CONFIG_USB_KAWETH=m
+ CONFIG_USB_PEGASUS=m
+ CONFIG_USB_RTL8150=m
+ CONFIG_USB_USBNET=m
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_CDC_EEM is not set
++CONFIG_USB_NET_CDC_NCM=m
+ CONFIG_USB_NET_DM9601=m
++# CONFIG_USB_NET_SMSC75XX is not set
++# CONFIG_USB_NET_SMSC95XX is not set
+ CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
+ CONFIG_USB_NET_PLUSB=m
++# CONFIG_USB_NET_MCS7830 is not set
+ CONFIG_USB_NET_RNDIS_HOST=m
++CONFIG_USB_NET_CDC_SUBSET=m
+ CONFIG_USB_ALI_M5632=y
+ CONFIG_USB_AN2720=y
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
+ CONFIG_USB_EPSON2888=y
++# CONFIG_USB_KC2190 is not set
++CONFIG_USB_NET_ZAURUS=m
++# CONFIG_USB_NET_CX82310_ETH is not set
++# CONFIG_USB_NET_INT51X1 is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_USB_SIERRA_NET is not set
++# CONFIG_USB_VL600 is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
+ CONFIG_PPP=y
+ CONFIG_PPP_MULTILINK=y
+ CONFIG_PPP_FILTER=y
+ CONFIG_PPP_ASYNC=y
++# CONFIG_PPP_SYNC_TTY is not set
+ CONFIG_PPP_DEFLATE=y
+ CONFIG_PPP_BSDCOMP=y
+ CONFIG_PPP_MPPE=m
+ CONFIG_PPPOE=m
+ CONFIG_SLIP=m
+ CONFIG_SLIP_COMPRESSED=y
++CONFIG_SLHC=y
+ CONFIG_SLIP_SMART=y
+ CONFIG_SLIP_MODE_SLIP6=y
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++CONFIG_KEYBOARD_ATKBD=y
++# CONFIG_KEYBOARD_QT1070 is not set
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
+ CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=32
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
+-CONFIG_LEGACY_PTY_COUNT=32
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_IPWIRELESS is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
+ CONFIG_SPI_BITBANG=y
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
+ CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ CONFIG_HWMON=m
++CONFIG_HWMON_VID=m
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Native drivers
++#
++# CONFIG_SENSORS_AD7414 is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADCXX is not set
+ CONFIG_SENSORS_ADM1021=m
+ CONFIG_SENSORS_ADM1025=m
+ CONFIG_SENSORS_ADM1026=m
+ CONFIG_SENSORS_ADM1029=m
+ CONFIG_SENSORS_ADM1031=m
+ CONFIG_SENSORS_ADM9240=m
++# CONFIG_SENSORS_ADT7411 is not set
++# CONFIG_SENSORS_ADT7462 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7475 is not set
++# CONFIG_SENSORS_ASC7621 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS620 is not set
+ CONFIG_SENSORS_DS1621=m
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_G760A is not set
+ CONFIG_SENSORS_GL518SM=m
+ CONFIG_SENSORS_GL520SM=m
++# CONFIG_SENSORS_GPIO_FAN is not set
+ CONFIG_SENSORS_IT87=m
++# CONFIG_SENSORS_JC42 is not set
++# CONFIG_SENSORS_LINEAGE is not set
+ CONFIG_SENSORS_LM63=m
++# CONFIG_SENSORS_LM70 is not set
+ CONFIG_SENSORS_LM73=m
+ CONFIG_SENSORS_LM75=m
+ CONFIG_SENSORS_LM77=m
+@@ -191,44 +1188,353 @@ CONFIG_SENSORS_LM85=m
+ CONFIG_SENSORS_LM87=m
+ CONFIG_SENSORS_LM90=m
+ CONFIG_SENSORS_LM92=m
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_LTC4151 is not set
++# CONFIG_SENSORS_LTC4215 is not set
++# CONFIG_SENSORS_LTC4245 is not set
++# CONFIG_SENSORS_LTC4261 is not set
++# CONFIG_SENSORS_LM95241 is not set
++# CONFIG_SENSORS_MAX1111 is not set
+ CONFIG_SENSORS_MAX1619=m
++# CONFIG_SENSORS_MAX6639 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
+ CONFIG_SENSORS_PCF8591=m
++# CONFIG_PMBUS is not set
++# CONFIG_SENSORS_SHT15 is not set
++# CONFIG_SENSORS_SHT21 is not set
++# CONFIG_SENSORS_SMM665 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_EMC1403 is not set
++# CONFIG_SENSORS_EMC2103 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
+ CONFIG_SENSORS_SMSC47B397=m
++# CONFIG_SENSORS_SCH5627 is not set
++# CONFIG_SENSORS_ADS1015 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_ADS7871 is not set
++# CONFIG_SENSORS_AMC6821 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_TMP102 is not set
++# CONFIG_SENSORS_TMP401 is not set
++# CONFIG_SENSORS_TMP421 is not set
++# CONFIG_SENSORS_VT1211 is not set
+ CONFIG_SENSORS_W83781D=m
+ CONFIG_SENSORS_W83791D=m
+ CONFIG_SENSORS_W83792D=m
+ CONFIG_SENSORS_W83793=m
++# CONFIG_SENSORS_W83795 is not set
+ CONFIG_SENSORS_W83L785TS=m
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
+ CONFIG_AT91RM9200_WATCHDOG=y
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
+ CONFIG_FB_MODE_HELPERS=y
+ CONFIG_FB_TILEBLITTING=y
++
++#
++# Frame buffer hardware drivers
++#
+ CONFIG_FB_S1D13XXX=y
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
+ CONFIG_BACKLIGHT_LCD_SUPPORT=y
+ CONFIG_LCD_CLASS_DEVICE=y
++# CONFIG_LCD_L4F00242T03 is not set
++# CONFIG_LCD_LMS283GF05 is not set
++# CONFIG_LCD_LTV350QV is not set
++# CONFIG_LCD_TDO24M is not set
++# CONFIG_LCD_VGG2432A4 is not set
++# CONFIG_LCD_PLATFORM is not set
++# CONFIG_LCD_S6E63M0 is not set
++# CONFIG_LCD_LD9040 is not set
+ CONFIG_BACKLIGHT_CLASS_DEVICE=y
+ # CONFIG_BACKLIGHT_GENERIC is not set
++# CONFIG_BACKLIGHT_ADP8860 is not set
++
++#
++# Display device support
++#
+ CONFIG_DISPLAY_SUPPORT=y
++
++#
++# Display hardware drivers
++#
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
+ CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+ CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++# CONFIG_FONT_6x11 is not set
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
+ CONFIG_FONT_MINI_4x6=y
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
+ CONFIG_LOGO=y
+ # CONFIG_LOGO_LINUX_MONO is not set
+ # CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_LOGO_LINUX_CLUT224=y
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++# CONFIG_HID_3M_PCT is not set
++CONFIG_HID_A4TECH=y
++# CONFIG_HID_ACRUX is not set
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++# CONFIG_HID_CANDO is not set
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++# CONFIG_HID_DRAGONRISE is not set
++# CONFIG_HID_EMS_FF is not set
++CONFIG_HID_EZKEY=y
++# CONFIG_HID_KEYTOUCH is not set
++CONFIG_HID_KYE=y
++# CONFIG_HID_UCLOGIC is not set
++# CONFIG_HID_WALTOP is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_TWINHAN is not set
++CONFIG_HID_KENSINGTON=y
++# CONFIG_HID_LCPOWER is not set
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++# CONFIG_LOGIG940_FF is not set
++# CONFIG_LOGIWII_FF is not set
++CONFIG_HID_MICROSOFT=y
++# CONFIG_HID_MOSART is not set
++CONFIG_HID_MONTEREY=y
++# CONFIG_HID_MULTITOUCH is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_ORTEK is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_PICOLCD is not set
++# CONFIG_HID_QUANTA is not set
++# CONFIG_HID_ROCCAT is not set
++# CONFIG_HID_ROCCAT_ARVO is not set
++# CONFIG_HID_ROCCAT_KONE is not set
++# CONFIG_HID_ROCCAT_KONEPLUS is not set
++# CONFIG_HID_ROCCAT_KOVAPLUS is not set
++# CONFIG_HID_ROCCAT_PYRA is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_STANTUM is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_ZEROPLUS is not set
++# CONFIG_HID_ZYDACRON is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
+ # CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
+ CONFIG_USB_ACM=m
+ CONFIG_USB_PRINTER=m
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
+ CONFIG_USB_SERIAL=y
+ CONFIG_USB_SERIAL_CONSOLE=y
++CONFIG_USB_EZUSB=y
+ CONFIG_USB_SERIAL_GENERIC=y
++# CONFIG_USB_SERIAL_AIRCABLE is not set
++# CONFIG_USB_SERIAL_ARK3116 is not set
++# CONFIG_USB_SERIAL_BELKIN is not set
++# CONFIG_USB_SERIAL_CH341 is not set
++# CONFIG_USB_SERIAL_WHITEHEAT is not set
++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
++# CONFIG_USB_SERIAL_CP210X is not set
++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
++# CONFIG_USB_SERIAL_EMPEG is not set
+ CONFIG_USB_SERIAL_FTDI_SIO=y
++# CONFIG_USB_SERIAL_FUNSOFT is not set
++# CONFIG_USB_SERIAL_VISOR is not set
++# CONFIG_USB_SERIAL_IPAQ is not set
++# CONFIG_USB_SERIAL_IR is not set
++# CONFIG_USB_SERIAL_EDGEPORT is not set
++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
++# CONFIG_USB_SERIAL_GARMIN is not set
++# CONFIG_USB_SERIAL_IPW is not set
++# CONFIG_USB_SERIAL_IUU is not set
++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+ CONFIG_USB_SERIAL_KEYSPAN=y
+ CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+ CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+@@ -242,58 +1548,390 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+ CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+ CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
++# CONFIG_USB_SERIAL_KLSI is not set
++# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+ CONFIG_USB_SERIAL_MCT_U232=y
++# CONFIG_USB_SERIAL_MOS7720 is not set
++# CONFIG_USB_SERIAL_MOS7840 is not set
++# CONFIG_USB_SERIAL_MOTOROLA is not set
++# CONFIG_USB_SERIAL_NAVMAN is not set
+ CONFIG_USB_SERIAL_PL2303=y
++# CONFIG_USB_SERIAL_OTI6858 is not set
++# CONFIG_USB_SERIAL_QCAUX is not set
++# CONFIG_USB_SERIAL_QUALCOMM is not set
++# CONFIG_USB_SERIAL_SPCP8X5 is not set
++# CONFIG_USB_SERIAL_HP4X is not set
++# CONFIG_USB_SERIAL_SAFE is not set
++# CONFIG_USB_SERIAL_SAMBA is not set
++# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
++# CONFIG_USB_SERIAL_SYMBOL is not set
++# CONFIG_USB_SERIAL_TI is not set
++# CONFIG_USB_SERIAL_CYBERJACK is not set
++# CONFIG_USB_SERIAL_XIRCOM is not set
++# CONFIG_USB_SERIAL_OPTION is not set
++# CONFIG_USB_SERIAL_OMNINET is not set
++# CONFIG_USB_SERIAL_OPTICON is not set
++# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
++# CONFIG_USB_SERIAL_ZIO is not set
++# CONFIG_USB_SERIAL_SSU100 is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
+ CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_G_NCM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FUNCTIONFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
+ CONFIG_USB_MASS_STORAGE=m
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_AT91=y
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_LM3530 is not set
++# CONFIG_LEDS_PCA9532 is not set
+ CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_LP5521 is not set
++# CONFIG_LEDS_LP5523 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_BD2802 is not set
++# CONFIG_LEDS_LT3593 is not set
+ CONFIG_LEDS_TRIGGERS=y
++
++#
++# LED Triggers
++#
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+ CONFIG_LEDS_TRIGGER_GPIO=y
+ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+ # CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
+ CONFIG_RTC_DRV_DS1307=y
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
+ CONFIG_RTC_DRV_PCF8563=y
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91RM9200=y
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+ CONFIG_EXT2_FS_XATTR=y
++# CONFIG_EXT2_FS_POSIX_ACL is not set
++# CONFIG_EXT2_FS_SECURITY is not set
++# CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
++CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+ # CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
+ CONFIG_REISERFS_FS=y
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++# CONFIG_REISERFS_FS_XATTR is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_EXPORTFS=y
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
+ CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
+ CONFIG_ISO9660_FS=y
+ CONFIG_JOLIET=y
+ CONFIG_ZISOFS=y
+ CONFIG_UDF_FS=y
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+ CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++# CONFIG_NTFS_RW is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
+ CONFIG_CONFIGFS_FS=y
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_ECRYPT_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
+ CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_JFFS2_ZLIB=y
+ CONFIG_JFFS2_LZO=y
++CONFIG_JFFS2_RTIME=y
+ CONFIG_JFFS2_RUBIN=y
++# CONFIG_JFFS2_CMODE_NONE is not set
++CONFIG_JFFS2_CMODE_PRIORITY=y
++# CONFIG_JFFS2_CMODE_SIZE is not set
++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
+ CONFIG_MINIX_FS=y
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ CONFIG_NFS_V3_ACL=y
+ CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
+ CONFIG_ROOT_NFS=y
++# CONFIG_NFS_USE_LEGACY_DNS is not set
++CONFIG_NFS_USE_KERNEL_DNS=y
++# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+ CONFIG_NFSD=y
+-CONFIG_SMB_FS=m
++CONFIG_NFSD_DEPRECATED=y
++# CONFIG_NFSD_V3 is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_ACL_SUPPORT=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_CEPH_FS is not set
+ CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_UPCALL is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_DFS_UPCALL is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
+ CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
+ CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+ CONFIG_NLS_CODEPAGE_737=m
+ CONFIG_NLS_CODEPAGE_775=m
+@@ -332,10 +1970,235 @@ CONFIG_NLS_ISO8859_15=m
+ CONFIG_NLS_KOI8_R=m
+ CONFIG_NLS_KOI8_U=m
+ CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
+ CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
+ # CONFIG_FTRACE is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++CONFIG_KEYS=y
++# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++# CONFIG_CRYPTO_LRW is not set
+ CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_GHASH is not set
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
+ CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_ZLIB is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++# CONFIG_CRYPTO_USER_API_HASH is not set
++# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
+index f8a9226..c69b418 100644
+--- a/arch/arm/configs/at91sam9260ek_defconfig
++++ b/arch/arm/configs/at91sam9260ek_defconfig
+@@ -1,83 +1,1489 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:07:55 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++CONFIG_HAVE_AT91_USART3=y
++CONFIG_HAVE_AT91_USART4=y
++CONFIG_HAVE_AT91_USART5=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
+ CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9260 Variants
++#
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
++
++#
++# AT91SAM9260 / AT91SAM9XE Board Type
++#
+ CONFIG_MACH_AT91SAM9260EK=y
++# CONFIG_MACH_CAM60 is not set
++# CONFIG_MACH_SAM9_L9260 is not set
++# CONFIG_MACH_AFEB9260 is not set
++# CONFIG_MACH_USB_A9260 is not set
++# CONFIG_MACH_QIL_A9260 is not set
++# CONFIG_MACH_CPU9260 is not set
++# CONFIG_MACH_FLEXIBITY is not set
++
++#
++# AT91SAM9260/AT91SAM9G20 boards
++#
++# CONFIG_MACH_SNAPPER_9260 is not set
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_AT91_EARLY_USART4 is not set
++# CONFIG_AT91_EARLY_USART5 is not set
++# CONFIG_GPIO_PCA953X is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
+ CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
+ # CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++# CONFIG_MTD_PARTITIONS is not set
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
+ CONFIG_NETDEVICES=y
+-CONFIG_NET_ETHERNET=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
+ CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
+ CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_STMMAC_ETH is not set
++CONFIG_NETDEV_10000=y
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
+ # CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_SPI is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
+ CONFIG_AT91SAM9X_WATCHDOG=y
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
+ # CONFIG_USB_HID is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
+ CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
+ CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
+ CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
+ CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
+ CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
+ CONFIG_DEBUG_LL=y
++# CONFIG_EARLY_PRINTK is not set
++# CONFIG_DEBUG_ICEDCC is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
+index b46025b..c653e82 100644
+--- a/arch/arm/configs/at91sam9261ek_defconfig
++++ b/arch/arm/configs/at91sam9261ek_defconfig
+@@ -1,95 +1,1709 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:10:03 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
+ CONFIG_ARCH_AT91SAM9261=y
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9261 Board Type
++#
+ CONFIG_MACH_AT91SAM9261EK=y
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
+ CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
+ # CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_MII=y
++# CONFIG_PHYLIB is not set
+ CONFIG_NET_ETHERNET=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
+ CONFIG_DM9000=y
++CONFIG_DM9000_DEBUGLEVEL=4
++# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
+ # CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_QT1070 is not set
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
+ CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
+ CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
+ CONFIG_AT91SAM9X_WATCHDOG=y
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_FB_INTSRAM is not set
++# CONFIG_FB_ATMEL_STN is not set
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
+ # CONFIG_USB_HID is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
+ CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
+ CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
+ CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
+ CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_AT91=m
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
+ CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
+ CONFIG_DEBUG_LL=y
++# CONFIG_EARLY_PRINTK is not set
++# CONFIG_DEBUG_ICEDCC is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_ALGAPI2=m
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=m
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_MANAGER2 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_GHASH is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_ZLIB is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++# CONFIG_CRYPTO_USER_API_HASH is not set
++# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
+index 8a04d6f..c2c3f6a 100644
+--- a/arch/arm/configs/at91sam9263ek_defconfig
++++ b/arch/arm/configs/at91sam9263ek_defconfig
+@@ -1,106 +1,1647 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:10:40 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
+ CONFIG_ARCH_AT91SAM9263=y
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9263 Board Type
++#
+ CONFIG_MACH_AT91SAM9263EK=y
++# CONFIG_MACH_USB_A9263 is not set
++# CONFIG_MACH_NEOCORE926 is not set
++
++#
++# AT91 Board Options
++#
+ CONFIG_MTD_AT91_DATAFLASH_CARD=y
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
+ CONFIG_IP_PNP_BOOTP=y
+ CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
+ # CONFIG_INET_LRO is not set
+ # CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
+ CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_HW=y
++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
+ CONFIG_NETDEVICES=y
+-CONFIG_NET_ETHERNET=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
+ CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
+ CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_STMMAC_ETH is not set
++CONFIG_NETDEV_10000=y
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
+ # CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_QT1070 is not set
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
+ CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
+ CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
+ # CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
+ CONFIG_AT91SAM9X_WATCHDOG=y
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
+ # CONFIG_USB_HID is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
+ CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
+ CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
+ CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_AT91=m
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
+ CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
+ CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
+ CONFIG_DEBUG_LL=y
++# CONFIG_EARLY_PRINTK is not set
++# CONFIG_DEBUG_ICEDCC is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9g10ek_defconfig b/arch/arm/configs/at91sam9g10ek_defconfig
+new file mode 100644
+index 0000000..5806e98
+--- /dev/null
++++ b/arch/arm/configs/at91sam9g10ek_defconfig
+@@ -0,0 +1,1708 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:16:07 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++CONFIG_ARCH_AT91SAM9G10=y
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9G10 Board Type
++#
++CONFIG_MACH_AT91SAM9G10EK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_AT91_DATAFLASH_CARD=y
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_MII=y
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++CONFIG_DM9000=y
++CONFIG_DM9000_DEBUGLEVEL=4
++# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_QT1070 is not set
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91SAM9X_WATCHDOG=y
++# CONFIG_MAX63XX_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_STN is not set
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
++CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_AT91=m
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
++CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_EARLY_PRINTK is not set
++# CONFIG_DEBUG_ICEDCC is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_ALGAPI2=m
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=m
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_MANAGER2 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_GHASH is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_ZLIB is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++# CONFIG_CRYPTO_USER_API_HASH is not set
++# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
+index 9e90e6d..22952e1 100644
+--- a/arch/arm/configs/at91sam9g20ek_defconfig
++++ b/arch/arm/configs/at91sam9g20ek_defconfig
+@@ -1,123 +1,1567 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:12:24 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++CONFIG_HAVE_AT91_USART3=y
++CONFIG_HAVE_AT91_USART4=y
++CONFIG_HAVE_AT91_USART5=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
+ CONFIG_ARCH_AT91SAM9G20=y
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9G20 Board Type
++#
+ CONFIG_MACH_AT91SAM9G20EK=y
+ CONFIG_MACH_AT91SAM9G20EK_2MMC=y
++# CONFIG_MACH_CPU9G20 is not set
++# CONFIG_MACH_ACMENETUSFOXG20 is not set
++# CONFIG_MACH_PORTUXG20 is not set
++# CONFIG_MACH_STAMP9G20 is not set
++# CONFIG_MACH_PCONTROL_G20 is not set
++# CONFIG_MACH_GSIA18S is not set
++
++#
++# AT91SAM9260/AT91SAM9G20 boards
++#
++# CONFIG_MACH_SNAPPER_9260 is not set
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_AT91_EARLY_USART4 is not set
++# CONFIG_AT91_EARLY_USART5 is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
+ CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_LEDS=y
+ CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
+ CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
+ CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
+ # CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+-CONFIG_MTD_CONCAT=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
+ CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
+ # CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
+ CONFIG_NETDEVICES=y
+-CONFIG_NET_ETHERNET=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
+ CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
+ CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
+ # CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
+ CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=16
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
+-CONFIG_LEGACY_PTY_COUNT=16
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
++# CONFIG_I2C is not set
+ CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
+ CONFIG_SPI_SPIDEV=y
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
+ CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+ CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
+ CONFIG_SND_SEQUENCER=y
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
+ CONFIG_SND_MIXER_OSS=y
+ CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
+ CONFIG_SND_SEQUENCER_OSS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
+ # CONFIG_SND_VERBOSE_PROCFS is not set
+-CONFIG_SND_AT73C213=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_RAWMIDI_SEQ is not set
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_ALOOP is not set
++# CONFIG_SND_VIRMIDI is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++CONFIG_SND_ARM=y
++
++#
++# Atmel devices (AVR32 and AT91)
++#
++# CONFIG_SND_ATMEL_AC97C is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_USB=y
++# CONFIG_SND_USB_AUDIO is not set
++# CONFIG_SND_USB_UA101 is not set
++# CONFIG_SND_USB_CAIAQ is not set
++# CONFIG_SND_USB_6FIRE is not set
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++# CONFIG_HID_3M_PCT is not set
++CONFIG_HID_A4TECH=y
++# CONFIG_HID_ACRUX is not set
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++# CONFIG_HID_CANDO is not set
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++# CONFIG_HID_PRODIKEYS is not set
++CONFIG_HID_CYPRESS=y
++# CONFIG_HID_DRAGONRISE is not set
++# CONFIG_HID_EMS_FF is not set
++CONFIG_HID_EZKEY=y
++# CONFIG_HID_KEYTOUCH is not set
++CONFIG_HID_KYE=y
++# CONFIG_HID_UCLOGIC is not set
++# CONFIG_HID_WALTOP is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_TWINHAN is not set
++CONFIG_HID_KENSINGTON=y
++# CONFIG_HID_LCPOWER is not set
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++# CONFIG_LOGIG940_FF is not set
++# CONFIG_LOGIWII_FF is not set
++CONFIG_HID_MICROSOFT=y
++# CONFIG_HID_MOSART is not set
++CONFIG_HID_MONTEREY=y
++# CONFIG_HID_MULTITOUCH is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_ORTEK is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_PICOLCD is not set
++# CONFIG_HID_QUANTA is not set
++# CONFIG_HID_ROCCAT is not set
++# CONFIG_HID_ROCCAT_ARVO is not set
++# CONFIG_HID_ROCCAT_KONE is not set
++# CONFIG_HID_ROCCAT_KONEPLUS is not set
++# CONFIG_HID_ROCCAT_KOVAPLUS is not set
++# CONFIG_HID_ROCCAT_PYRA is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_STANTUM is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_ZEROPLUS is not set
++# CONFIG_HID_ZYDACRON is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
+ CONFIG_USB_DEVICEFS=y
+ # CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
+ CONFIG_USB_ZERO=m
++# CONFIG_USB_AUDIO is not set
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
+ CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
+ CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
+-CONFIG_MMC_AT91=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_AT91=y
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
+ CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_LT3593 is not set
+ CONFIG_LEDS_TRIGGERS=y
++
++#
++# LED Triggers
++#
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
+ CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
+ CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+ # CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
++# CONFIG_DEBUG_USER is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9m10g45ek_defconfig b/arch/arm/configs/at91sam9m10g45ek_defconfig
+new file mode 100644
+index 0000000..9aeabf5
+--- /dev/null
++++ b/arch/arm/configs/at91sam9m10g45ek_defconfig
+@@ -0,0 +1,2226 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:19:56 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_POSIX_MQUEUE_SYSCTL=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_NAMESPACES is not set
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++# CONFIG_RD_XZ is not set
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EXPERT=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++CONFIG_EMBEDDED=y
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++CONFIG_HAVE_AT91_USART3=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++CONFIG_ARCH_AT91SAM9G45=y
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9G45 Board Type
++#
++CONFIG_MACH_AT91SAM9M10G45EK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++CONFIG_AT91_SLOW_CLOCK=y
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++# CONFIG_NO_HZ is not set
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++CONFIG_LEDS=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++CONFIG_UACCESS_WITH_MEMCPY=y
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++CONFIG_AUTO_ZRELADDR=y
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++# CONFIG_IP_FIB_TRIE_STATS is not set
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++# CONFIG_NETFILTER_ADVANCED is not set
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=y
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_XTABLES=y
++
++#
++# Xtables combined modules
++#
++CONFIG_NETFILTER_XT_MARK=m
++
++#
++# Xtables targets
++#
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++
++#
++# Xtables matches
++#
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++# CONFIG_IP_SET is not set
++# CONFIG_IP_VS is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=y
++CONFIG_NF_CONNTRACK_IPV4=y
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_IPTABLES=y
++CONFIG_IP_NF_FILTER=y
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=y
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=y
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++# CONFIG_NF_NAT_TFTP is not set
++# CONFIG_NF_NAT_AMANDA is not set
++# CONFIG_NF_NAT_PPTP is not set
++# CONFIG_NF_NAT_H323 is not set
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++CONFIG_BRIDGE_IGMP_SNOOPING=y
++# CONFIG_NET_DSA is not set
++CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++# CONFIG_NET_SCH_PRIO is not set
++# CONFIG_NET_SCH_MULTIQ is not set
++# CONFIG_NET_SCH_RED is not set
++# CONFIG_NET_SCH_SFB is not set
++# CONFIG_NET_SCH_SFQ is not set
++# CONFIG_NET_SCH_TEQL is not set
++CONFIG_NET_SCH_TBF=m
++# CONFIG_NET_SCH_GRED is not set
++# CONFIG_NET_SCH_DSMARK is not set
++# CONFIG_NET_SCH_NETEM is not set
++# CONFIG_NET_SCH_DRR is not set
++# CONFIG_NET_SCH_MQPRIO is not set
++# CONFIG_NET_SCH_CHOKE is not set
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++# CONFIG_NET_CLS_BASIC is not set
++# CONFIG_NET_CLS_TCINDEX is not set
++# CONFIG_NET_CLS_ROUTE4 is not set
++CONFIG_NET_CLS_FW=m
++# CONFIG_NET_CLS_U32 is not set
++# CONFIG_NET_CLS_RSVP is not set
++# CONFIG_NET_CLS_RSVP6 is not set
++# CONFIG_NET_CLS_FLOW is not set
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
++CONFIG_DNS_RESOLVER=y
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++CONFIG_CAN=y
++CONFIG_CAN_RAW=y
++# CONFIG_CAN_BCM is not set
++
++#
++# CAN Device Drivers
++#
++# CONFIG_CAN_VCAN is not set
++# CONFIG_CAN_SLCAN is not set
++CONFIG_CAN_DEV=y
++CONFIG_CAN_CALC_BITTIMING=y
++# CONFIG_CAN_MCP251X is not set
++# CONFIG_CAN_SJA1000 is not set
++# CONFIG_CAN_C_CAN is not set
++
++#
++# CAN USB interfaces
++#
++# CONFIG_CAN_EMS_USB is not set
++# CONFIG_CAN_ESD_USB2 is not set
++# CONFIG_CAN_SOFTING is not set
++# CONFIG_CAN_DEBUG_DEVICES is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WEXT_CORE=y
++CONFIG_WEXT_PROC=y
++CONFIG_WEXT_SPY=y
++CONFIG_WEXT_PRIV=y
++CONFIG_CFG80211=y
++# CONFIG_NL80211_TESTMODE is not set
++# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
++# CONFIG_CFG80211_REG_DEBUG is not set
++CONFIG_CFG80211_DEFAULT_PS=y
++# CONFIG_CFG80211_DEBUGFS is not set
++# CONFIG_CFG80211_INTERNAL_REGDB is not set
++CONFIG_CFG80211_WEXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++CONFIG_LIB80211=y
++# CONFIG_LIB80211_DEBUG is not set
++CONFIG_MAC80211=y
++CONFIG_MAC80211_HAS_RC=y
++# CONFIG_MAC80211_RC_PID is not set
++CONFIG_MAC80211_RC_MINSTREL=y
++CONFIG_MAC80211_RC_MINSTREL_HT=y
++CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
++CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
++# CONFIG_MAC80211_MESH is not set
++CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG_MENU is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=y
++# CONFIG_FIRMWARE_IN_KERNEL is not set
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_TESTS=m
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_ATMEL=y
++# CONFIG_MTD_NAND_ATMEL_PMECC_HW is not set
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=4
++CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_AD525X_DPOT is not set
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_ICS932S401 is not set
++CONFIG_ATMEL_SSC=y
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_APDS9802ALS is not set
++# CONFIG_ISL29003 is not set
++# CONFIG_ISL29020 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_SENSORS_BH1780 is not set
++# CONFIG_SENSORS_BH1770 is not set
++# CONFIG_SENSORS_APDS990X is not set
++# CONFIG_HMC6352 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_TI_DAC7512 is not set
++# CONFIG_BMP085 is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_EEPROM_MAX6875 is not set
++CONFIG_EEPROM_93CX6=m
++# CONFIG_IWMC3200TOP is not set
++
++#
++# Texas Instruments shared transport line discipline
++#
++# CONFIG_SENSORS_LIS3_SPI is not set
++# CONFIG_SENSORS_LIS3_I2C is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++CONFIG_DAVICOM_PHY=y
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8842 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++CONFIG_LIBERTAS_THINFIRM=m
++# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++# CONFIG_USB_NET_RNDIS_WLAN is not set
++CONFIG_RTL8187=m
++CONFIG_RTL8187_LEDS=y
++# CONFIG_MAC80211_HWSIM is not set
++CONFIG_ATH_COMMON=m
++# CONFIG_ATH_DEBUG is not set
++CONFIG_ATH9K_HW=m
++CONFIG_ATH9K_COMMON=m
++CONFIG_ATH9K_HTC=m
++# CONFIG_ATH9K_HTC_DEBUGFS is not set
++CONFIG_AR9170_USB=m
++CONFIG_AR9170_LEDS=y
++CONFIG_CARL9170=m
++CONFIG_CARL9170_LEDS=y
++CONFIG_CARL9170_WPC=y
++CONFIG_B43=m
++CONFIG_B43_SDIO=y
++CONFIG_B43_PIO=y
++CONFIG_B43_PHY_N=y
++CONFIG_B43_PHY_LP=y
++CONFIG_B43_LEDS=y
++CONFIG_B43_HWRNG=y
++# CONFIG_B43_DEBUG is not set
++# CONFIG_B43LEGACY is not set
++# CONFIG_HOSTAP is not set
++# CONFIG_IWM is not set
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_LIBERTAS_SPI=m
++# CONFIG_LIBERTAS_DEBUG is not set
++# CONFIG_LIBERTAS_MESH is not set
++# CONFIG_P54_COMMON is not set
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT33XX=y
++CONFIG_RT2800USB_RT35XX=y
++CONFIG_RT2800USB_UNKNOWN=y
++CONFIG_RT2800_LIB=m
++CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB=m
++CONFIG_RT2X00_LIB_HT=y
++CONFIG_RT2X00_LIB_FIRMWARE=y
++CONFIG_RT2X00_LIB_CRYPTO=y
++CONFIG_RT2X00_LIB_LEDS=y
++# CONFIG_RT2X00_DEBUG is not set
++CONFIG_RTL8192CU=m
++CONFIG_RTLWIFI=m
++CONFIG_RTL8192C_COMMON=m
++CONFIG_WL1251=m
++# CONFIG_WL1251_SPI is not set
++CONFIG_WL1251_SDIO=m
++CONFIG_WL12XX_MENU=m
++CONFIG_WL12XX=m
++# CONFIG_WL12XX_HT is not set
++# CONFIG_WL12XX_SPI is not set
++CONFIG_WL12XX_SDIO=m
++# CONFIG_WL12XX_SDIO_TEST is not set
++CONFIG_WL12XX_PLATFORM_DATA=y
++CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW_DEBUG is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++CONFIG_KEYBOARD_QT1070=y
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++CONFIG_TOUCHSCREEN_ATMEL_MXT=m
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_LIBPS2 is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=8
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_TTY_PRINTK is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_COMPAT is not set
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
++CONFIG_SPI_ATMEL=y
++CONFIG_SPI_ATMEL_DMA=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB=m
++CONFIG_SSB_BLOCKIO=y
++CONFIG_SSB_SDIOHOST_POSSIBLE=y
++CONFIG_SSB_SDIOHOST=y
++# CONFIG_SSB_SILENT is not set
++# CONFIG_SSB_DEBUG is not set
++# CONFIG_MFD_SUPPORT is not set
++# CONFIG_REGULATOR is not set
++CONFIG_MEDIA_SUPPORT=y
++
++#
++# Multimedia core support
++#
++CONFIG_MEDIA_CONTROLLER=y
++CONFIG_VIDEO_DEV=y
++CONFIG_VIDEO_V4L2_COMMON=y
++CONFIG_VIDEO_V4L2_SUBDEV_API=y
++# CONFIG_DVB_CORE is not set
++CONFIG_VIDEO_MEDIA=y
++
++#
++# Multimedia drivers
++#
++CONFIG_RC_CORE=y
++CONFIG_LIRC=y
++CONFIG_RC_MAP=y
++CONFIG_IR_NEC_DECODER=y
++CONFIG_IR_RC5_DECODER=y
++CONFIG_IR_RC6_DECODER=y
++CONFIG_IR_JVC_DECODER=y
++CONFIG_IR_SONY_DECODER=y
++CONFIG_IR_RC5_SZ_DECODER=y
++CONFIG_IR_LIRC_CODEC=y
++# CONFIG_IR_IMON is not set
++# CONFIG_IR_MCEUSB is not set
++# CONFIG_IR_STREAMZAP is not set
++# CONFIG_RC_LOOPBACK is not set
++# CONFIG_MEDIA_ATTACH is not set
++CONFIG_MEDIA_TUNER=y
++CONFIG_MEDIA_TUNER_CUSTOMISE=y
++
++#
++# Customize TV tuners
++#
++CONFIG_MEDIA_TUNER_SIMPLE=m
++CONFIG_MEDIA_TUNER_TDA8290=m
++CONFIG_MEDIA_TUNER_TDA827X=m
++CONFIG_MEDIA_TUNER_TDA18271=m
++CONFIG_MEDIA_TUNER_TDA9887=m
++CONFIG_MEDIA_TUNER_TEA5761=m
++CONFIG_MEDIA_TUNER_TEA5767=m
++CONFIG_MEDIA_TUNER_MT20XX=m
++CONFIG_MEDIA_TUNER_MT2060=m
++CONFIG_MEDIA_TUNER_MT2266=m
++CONFIG_MEDIA_TUNER_MT2131=m
++CONFIG_MEDIA_TUNER_QT1010=m
++CONFIG_MEDIA_TUNER_XC2028=m
++CONFIG_MEDIA_TUNER_XC5000=m
++CONFIG_MEDIA_TUNER_MXL5005S=m
++CONFIG_MEDIA_TUNER_MXL5007T=m
++CONFIG_MEDIA_TUNER_MC44S803=m
++CONFIG_MEDIA_TUNER_MAX2165=m
++CONFIG_MEDIA_TUNER_TDA18218=m
++CONFIG_VIDEO_V4L2=y
++CONFIG_VIDEOBUF_GEN=y
++CONFIG_VIDEOBUF2_CORE=y
++CONFIG_VIDEOBUF2_MEMOPS=y
++CONFIG_VIDEOBUF2_DMA_CONTIG=y
++CONFIG_VIDEO_CAPTURE_DRIVERS=y
++# CONFIG_VIDEO_ADV_DEBUG is not set
++CONFIG_VIDEO_FIXED_MINOR_RANGES=y
++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
++CONFIG_VIDEO_IR_I2C=y
++
++#
++# Encoders/decoders and other helper chips
++#
++
++#
++# Audio decoders
++#
++# CONFIG_VIDEO_TVAUDIO is not set
++# CONFIG_VIDEO_TDA7432 is not set
++# CONFIG_VIDEO_TDA9840 is not set
++# CONFIG_VIDEO_TEA6415C is not set
++# CONFIG_VIDEO_TEA6420 is not set
++# CONFIG_VIDEO_MSP3400 is not set
++# CONFIG_VIDEO_CS5345 is not set
++# CONFIG_VIDEO_CS53L32A is not set
++# CONFIG_VIDEO_M52790 is not set
++# CONFIG_VIDEO_TLV320AIC23B is not set
++# CONFIG_VIDEO_WM8775 is not set
++# CONFIG_VIDEO_WM8739 is not set
++# CONFIG_VIDEO_VP27SMPX is not set
++
++#
++# RDS decoders
++#
++# CONFIG_VIDEO_SAA6588 is not set
++
++#
++# Video decoders
++#
++# CONFIG_VIDEO_ADV7180 is not set
++# CONFIG_VIDEO_BT819 is not set
++# CONFIG_VIDEO_BT856 is not set
++# CONFIG_VIDEO_BT866 is not set
++# CONFIG_VIDEO_KS0127 is not set
++# CONFIG_VIDEO_OV7670 is not set
++# CONFIG_VIDEO_MT9V011 is not set
++# CONFIG_VIDEO_TCM825X is not set
++# CONFIG_VIDEO_SAA7110 is not set
++# CONFIG_VIDEO_SAA711X is not set
++# CONFIG_VIDEO_SAA717X is not set
++# CONFIG_VIDEO_SAA7191 is not set
++# CONFIG_VIDEO_TVP514X is not set
++# CONFIG_VIDEO_TVP5150 is not set
++# CONFIG_VIDEO_TVP7002 is not set
++# CONFIG_VIDEO_VPX3220 is not set
++
++#
++# Video and audio decoders
++#
++# CONFIG_VIDEO_CX25840 is not set
++
++#
++# MPEG video encoders
++#
++# CONFIG_VIDEO_CX2341X is not set
++
++#
++# Video encoders
++#
++# CONFIG_VIDEO_SAA7127 is not set
++# CONFIG_VIDEO_SAA7185 is not set
++# CONFIG_VIDEO_ADV7170 is not set
++# CONFIG_VIDEO_ADV7175 is not set
++# CONFIG_VIDEO_THS7303 is not set
++# CONFIG_VIDEO_ADV7343 is not set
++# CONFIG_VIDEO_AK881X is not set
++
++#
++# Video improvement chips
++#
++# CONFIG_VIDEO_UPD64031A is not set
++# CONFIG_VIDEO_UPD64083 is not set
++# CONFIG_VIDEO_CPIA2 is not set
++# CONFIG_VIDEO_TIMBERDALE is not set
++# CONFIG_VIDEO_SR030PC30 is not set
++# CONFIG_VIDEO_NOON010PC30 is not set
++CONFIG_SOC_CAMERA=y
++# CONFIG_SOC_CAMERA_IMX074 is not set
++# CONFIG_SOC_CAMERA_MT9M001 is not set
++# CONFIG_SOC_CAMERA_MT9M111 is not set
++# CONFIG_SOC_CAMERA_MT9T031 is not set
++# CONFIG_SOC_CAMERA_MT9T112 is not set
++# CONFIG_SOC_CAMERA_MT9V022 is not set
++# CONFIG_SOC_CAMERA_RJ54N1 is not set
++# CONFIG_SOC_CAMERA_TW9910 is not set
++# CONFIG_SOC_CAMERA_PLATFORM is not set
++CONFIG_SOC_CAMERA_OV2640=y
++# CONFIG_SOC_CAMERA_OV6650 is not set
++# CONFIG_SOC_CAMERA_OV772X is not set
++# CONFIG_SOC_CAMERA_OV9640 is not set
++# CONFIG_SOC_CAMERA_OV9740 is not set
++CONFIG_VIDEO_ATMEL_ISI=y
++# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
++# CONFIG_VIDEO_SH_MOBILE_CEU is not set
++# CONFIG_V4L_USB_DRIVERS is not set
++# CONFIG_V4L_MEM2MEM_DRIVERS is not set
++# CONFIG_RADIO_ADAPTERS is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++# CONFIG_LCD_CLASS_DEVICE is not set
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++CONFIG_BACKLIGHT_ATMEL_LCDC=y
++CONFIG_BACKLIGHT_GENERIC=y
++# CONFIG_BACKLIGHT_ADP8860 is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_HWDEP=m
++CONFIG_SND_RAWMIDI=m
++CONFIG_SND_JACK=y
++CONFIG_SND_SEQUENCER=y
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_SEQUENCER_OSS is not set
++# CONFIG_SND_HRTIMER is not set
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_RAWMIDI_SEQ=m
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_ARM is not set
++
++#
++# Atmel devices (AVR32 and AT91)
++#
++# CONFIG_SND_ATMEL_AC97C is not set
++# CONFIG_SND_SPI is not set
++CONFIG_SND_USB=y
++CONFIG_SND_USB_AUDIO=m
++# CONFIG_SND_USB_UA101 is not set
++# CONFIG_SND_USB_CAIAQ is not set
++# CONFIG_SND_USB_6FIRE is not set
++CONFIG_SND_SOC=y
++# CONFIG_SND_SOC_CACHE_LZO is not set
++CONFIG_SND_ATMEL_SOC=y
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++# CONFIG_HID_3M_PCT is not set
++# CONFIG_HID_A4TECH is not set
++# CONFIG_HID_ACRUX is not set
++# CONFIG_HID_APPLE is not set
++# CONFIG_HID_BELKIN is not set
++# CONFIG_HID_CANDO is not set
++# CONFIG_HID_CHERRY is not set
++# CONFIG_HID_CHICONY is not set
++# CONFIG_HID_PRODIKEYS is not set
++# CONFIG_HID_CYPRESS is not set
++# CONFIG_HID_DRAGONRISE is not set
++# CONFIG_HID_EMS_FF is not set
++# CONFIG_HID_EZKEY is not set
++# CONFIG_HID_KEYTOUCH is not set
++# CONFIG_HID_KYE is not set
++# CONFIG_HID_UCLOGIC is not set
++# CONFIG_HID_WALTOP is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_TWINHAN is not set
++# CONFIG_HID_KENSINGTON is not set
++# CONFIG_HID_LCPOWER is not set
++# CONFIG_HID_LOGITECH is not set
++# CONFIG_HID_MICROSOFT is not set
++# CONFIG_HID_MOSART is not set
++# CONFIG_HID_MONTEREY is not set
++# CONFIG_HID_MULTITOUCH is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_ORTEK is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_PICOLCD is not set
++# CONFIG_HID_QUANTA is not set
++# CONFIG_HID_ROCCAT is not set
++# CONFIG_HID_ROCCAT_ARVO is not set
++# CONFIG_HID_ROCCAT_KONE is not set
++# CONFIG_HID_ROCCAT_KONEPLUS is not set
++# CONFIG_HID_ROCCAT_KOVAPLUS is not set
++# CONFIG_HID_ROCCAT_PYRA is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_STANTUM is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_ZEROPLUS is not set
++# CONFIG_HID_ZYDACRON is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MON is not set
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++CONFIG_USB_LIBUSUAL=y
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++# CONFIG_USB_AUDIO is not set
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_G_NCM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FUNCTIONFS is not set
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_USB_CDC_COMPOSITE=m
++CONFIG_USB_G_MULTI=m
++CONFIG_USB_G_MULTI_RNDIS=y
++CONFIG_USB_G_MULTI_CDC=y
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++# CONFIG_USB_G_WEBCAM is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_AT91 is not set
++CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_ATMELMCI_DMA=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_LM3530 is not set
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_LP5521 is not set
++# CONFIG_LEDS_LP5523 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_BD2802 is not set
++# CONFIG_LEDS_LT3593 is not set
++CONFIG_LEDS_TRIGGERS=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++CONFIG_LEDS_TRIGGER_GPIO=y
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91RM9200=y
++# CONFIG_RTC_DRV_AT91SAM9 is not set
++CONFIG_DMADEVICES=y
++# CONFIG_DMADEVICES_DEBUG is not set
++
++#
++# DMA Devices
++#
++# CONFIG_DW_DMAC is not set
++CONFIG_AT_HDMAC=y
++# CONFIG_TIMB_DMA is not set
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++# CONFIG_ASYNC_TX_DMA is not set
++CONFIG_DMATEST=m
++# CONFIG_AUXDISPLAY is not set
++CONFIG_UIO=y
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_FANOTIFY=y
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_ECRYPT_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_LOGFS is not set
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=m
++# CONFIG_SQUASHFS_XATTR is not set
++# CONFIG_SQUASHFS_LZO is not set
++# CONFIG_SQUASHFS_XZ is not set
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
++# CONFIG_NFS_USE_LEGACY_DNS is not set
++CONFIG_NFS_USE_KERNEL_DNS=y
++# CONFIG_NFS_USE_NEW_IDMAPPER is not set
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_LKDTM is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
++CONFIG_DEBUG_USER=y
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++CONFIG_KEYS=y
++# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_GHASH is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_ZLIB is not set
++CONFIG_CRYPTO_LZO=y
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++# CONFIG_CRYPTO_USER_API_HASH is not set
++# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
++# CONFIG_CRYPTO_HW is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++# CONFIG_CRC_T10DIF is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++# CONFIG_XZ_DEC is not set
++# CONFIG_XZ_DEC_BCJ is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++CONFIG_AVERAGE=y
+diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
+index 75621e4..b96c97d 100644
+--- a/arch/arm/configs/at91sam9rlek_defconfig
++++ b/arch/arm/configs/at91sam9rlek_defconfig
+@@ -1,84 +1,1354 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:13:07 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_USART3=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+ CONFIG_ARCH_AT91SAM9RL=y
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9RL Board Type
++#
+ CONFIG_MACH_AT91SAM9RLEK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_GPIO_PCA953X is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
+ # CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_PACKET is not set
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++# CONFIG_INET is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+-CONFIG_MTD_CONCAT=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
+ CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=4
+ CONFIG_BLK_DEV_RAM_SIZE=24576
+-CONFIG_ATMEL_SSC=y
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_BOOT_SYSFS is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
+ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+ CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
+ # CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
+ CONFIG_AT91SAM9X_WATCHDOG=y
++# CONFIG_MAX63XX_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_88PM860X is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_HTC_I2CPLD is not set
++# CONFIG_TPS6105X is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TPS6507X is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_STMPE is not set
++# CONFIG_MFD_TC3589X is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_MAX8925 is not set
++# CONFIG_MFD_MAX8997 is not set
++# CONFIG_MFD_MAX8998 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X_I2C is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_WM8994 is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_TPS6586X is not set
++# CONFIG_MFD_WL1273_CORE is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
+-# CONFIG_VGA_CONSOLE is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
++
++#
++# Enable Host or Gadget support to see Inventra options
++#
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# OTG and related infrastructure
++#
+ CONFIG_MMC=y
+-CONFIG_MMC_AT91=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_AT91=y
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_RTC_DRV_AT91RM9200 is not set
+ CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
+-CONFIG_INOTIFY=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
+ CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
+ CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_INFO_REDUCED is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
+ CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_STACK_USAGE is not set
+ CONFIG_DEBUG_LL=y
++# CONFIG_EARLY_PRINTK is not set
++# CONFIG_DEBUG_ICEDCC is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
+index 48af066..c18ac44 100644
+--- a/arch/arm/configs/at91sam9x5ek_defconfig
++++ b/arch/arm/configs/at91sam9x5ek_defconfig
+@@ -1,119 +1,948 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 13:13:25 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
+ CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
++CONFIG_POSIX_MQUEUE_SYSCTL=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_NAMESPACES is not set
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
+ CONFIG_RD_BZIP2=y
+ CONFIG_RD_LZMA=y
++# CONFIG_RD_XZ is not set
+ CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EXPERT=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
+ CONFIG_EMBEDDED=y
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
+ # CONFIG_LBDAF is not set
+ # CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
+ CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91SAM9G20 is not set
++# CONFIG_ARCH_AT91SAM9G45 is not set
+ CONFIG_ARCH_AT91SAM9X5=y
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9x5 Series Board Type
++#
+ CONFIG_MACH_AT91SAM9X5EK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+ CONFIG_AT91_SLOW_CLOCK=y
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++# CONFIG_NO_HZ is not set
+ CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
+ CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_LEDS=y
+ CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
+ CONFIG_UACCESS_WITH_MEMCPY=y
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
+ CONFIG_AUTO_ZRELADDR=y
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
+ CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
+ # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
++
++#
++# Networking options
++#
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+ CONFIG_IP_ADVANCED_ROUTER=y
++# CONFIG_IP_FIB_TRIE_STATS is not set
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
+ # CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+ CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
+ # CONFIG_NETFILTER_ADVANCED is not set
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_LOG=m
+ CONFIG_NF_CONNTRACK=y
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_XTABLES=y
++
++#
++# Xtables combined modules
++#
++CONFIG_NETFILTER_XT_MARK=m
++
++#
++# Xtables targets
++#
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++
++#
++# Xtables matches
++#
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++# CONFIG_IP_SET is not set
++# CONFIG_IP_VS is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=y
+ CONFIG_NF_CONNTRACK_IPV4=y
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+ CONFIG_IP_NF_IPTABLES=y
+ CONFIG_IP_NF_FILTER=y
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
+ CONFIG_NF_NAT=y
++CONFIG_NF_NAT_NEEDED=y
+ CONFIG_IP_NF_TARGET_MASQUERADE=y
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++# CONFIG_NF_NAT_TFTP is not set
++# CONFIG_NF_NAT_AMANDA is not set
++# CONFIG_NF_NAT_PPTP is not set
++# CONFIG_NF_NAT_H323 is not set
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++CONFIG_STP=m
+ CONFIG_BRIDGE=m
++CONFIG_BRIDGE_IGMP_SNOOPING=y
++# CONFIG_NET_DSA is not set
+ CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
+ CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
+ CONFIG_NET_SCH_CBQ=m
+ CONFIG_NET_SCH_HTB=m
+ CONFIG_NET_SCH_HFSC=m
++# CONFIG_NET_SCH_PRIO is not set
++# CONFIG_NET_SCH_MULTIQ is not set
++# CONFIG_NET_SCH_RED is not set
++# CONFIG_NET_SCH_SFB is not set
++# CONFIG_NET_SCH_SFQ is not set
++# CONFIG_NET_SCH_TEQL is not set
+ CONFIG_NET_SCH_TBF=m
++# CONFIG_NET_SCH_GRED is not set
++# CONFIG_NET_SCH_DSMARK is not set
++# CONFIG_NET_SCH_NETEM is not set
++# CONFIG_NET_SCH_DRR is not set
++# CONFIG_NET_SCH_MQPRIO is not set
++# CONFIG_NET_SCH_CHOKE is not set
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++# CONFIG_NET_CLS_BASIC is not set
++# CONFIG_NET_CLS_TCINDEX is not set
++# CONFIG_NET_CLS_ROUTE4 is not set
+ CONFIG_NET_CLS_FW=m
++# CONFIG_NET_CLS_U32 is not set
++# CONFIG_NET_CLS_RSVP is not set
++# CONFIG_NET_CLS_RSVP6 is not set
++# CONFIG_NET_CLS_FLOW is not set
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
++CONFIG_DNS_RESOLVER=y
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
+ CONFIG_CAN=y
+ CONFIG_CAN_RAW=y
++# CONFIG_CAN_BCM is not set
++
++#
++# CAN Device Drivers
++#
++# CONFIG_CAN_VCAN is not set
++# CONFIG_CAN_SLCAN is not set
+ CONFIG_CAN_DEV=y
+ CONFIG_CAN_CALC_BITTIMING=y
+ CONFIG_CAN_AT91=y
++# CONFIG_CAN_MCP251X is not set
++# CONFIG_CAN_SJA1000 is not set
++# CONFIG_CAN_C_CAN is not set
++
++#
++# CAN USB interfaces
++#
++# CONFIG_CAN_EMS_USB is not set
++# CONFIG_CAN_ESD_USB2 is not set
++# CONFIG_CAN_SOFTING is not set
++# CONFIG_CAN_DEBUG_DEVICES is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WEXT_CORE=y
++CONFIG_WEXT_PROC=y
++CONFIG_WEXT_SPY=y
++CONFIG_WEXT_PRIV=y
+ CONFIG_CFG80211=y
++# CONFIG_NL80211_TESTMODE is not set
++# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
++# CONFIG_CFG80211_REG_DEBUG is not set
++CONFIG_CFG80211_DEFAULT_PS=y
++# CONFIG_CFG80211_DEBUGFS is not set
++# CONFIG_CFG80211_INTERNAL_REGDB is not set
++CONFIG_CFG80211_WEXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
+ CONFIG_LIB80211=y
++# CONFIG_LIB80211_DEBUG is not set
+ CONFIG_MAC80211=y
++CONFIG_MAC80211_HAS_RC=y
++# CONFIG_MAC80211_RC_PID is not set
++CONFIG_MAC80211_RC_MINSTREL=y
++CONFIG_MAC80211_RC_MINSTREL_HT=y
++CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
++CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
++# CONFIG_MAC80211_MESH is not set
++CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG_MENU is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
+ # CONFIG_STANDALONE is not set
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=y
+ # CONFIG_FIRMWARE_IN_KERNEL is not set
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_TESTS=m
+ CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
+ CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_PMECC_HW=y
++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
+ CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=4
+ CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
+ CONFIG_MISC_DEVICES=y
++# CONFIG_AD525X_DPOT is not set
+ CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++CONFIG_ATMEL_TCB_CLKSRC_32BIT=y
++# CONFIG_ICS932S401 is not set
+ CONFIG_ATMEL_SSC=y
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_APDS9802ALS is not set
++# CONFIG_ISL29003 is not set
++# CONFIG_ISL29020 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_SENSORS_BH1780 is not set
++# CONFIG_SENSORS_BH1770 is not set
++# CONFIG_SENSORS_APDS990X is not set
++# CONFIG_HMC6352 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_TI_DAC7512 is not set
++# CONFIG_BMP085 is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_EEPROM_MAX6875 is not set
++CONFIG_EEPROM_93CX6=m
++# CONFIG_IWMC3200TOP is not set
++
++#
++# Texas Instruments shared transport line discipline
++#
++# CONFIG_SENSORS_LIS3_SPI is not set
++# CONFIG_SENSORS_LIS3_I2C is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
+ CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+ CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
+ # CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
+ CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
+ CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
+ CONFIG_DAVICOM_PHY=y
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8842 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
+ CONFIG_LIBERTAS_THINFIRM=m
++# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+ CONFIG_LIBERTAS_THINFIRM_USB=m
+ CONFIG_AT76C50X_USB=m
+ CONFIG_USB_ZD1201=m
++# CONFIG_USB_NET_RNDIS_WLAN is not set
+ CONFIG_RTL8187=m
++CONFIG_RTL8187_LEDS=y
++# CONFIG_MAC80211_HWSIM is not set
+ CONFIG_ATH_COMMON=m
++# CONFIG_ATH_DEBUG is not set
++CONFIG_ATH9K_HW=m
++CONFIG_ATH9K_COMMON=m
+ CONFIG_ATH9K_HTC=m
++# CONFIG_ATH9K_HTC_DEBUGFS is not set
+ CONFIG_AR9170_USB=m
++CONFIG_AR9170_LEDS=y
+ CONFIG_CARL9170=m
++CONFIG_CARL9170_LEDS=y
++CONFIG_CARL9170_WPC=y
+ CONFIG_B43=m
+ CONFIG_B43_SDIO=y
++CONFIG_B43_PIO=y
+ CONFIG_B43_PHY_N=y
++CONFIG_B43_PHY_LP=y
++CONFIG_B43_LEDS=y
++CONFIG_B43_HWRNG=y
++# CONFIG_B43_DEBUG is not set
++# CONFIG_B43LEGACY is not set
++# CONFIG_HOSTAP is not set
++# CONFIG_IWM is not set
+ CONFIG_LIBERTAS=m
+ CONFIG_LIBERTAS_USB=m
+ CONFIG_LIBERTAS_SDIO=m
+ CONFIG_LIBERTAS_SPI=m
++# CONFIG_LIBERTAS_DEBUG is not set
++# CONFIG_LIBERTAS_MESH is not set
++# CONFIG_P54_COMMON is not set
+ CONFIG_RT2X00=m
+ CONFIG_RT2500USB=m
+ CONFIG_RT73USB=m
+@@ -121,123 +950,1279 @@ CONFIG_RT2800USB=m
+ CONFIG_RT2800USB_RT33XX=y
+ CONFIG_RT2800USB_RT35XX=y
+ CONFIG_RT2800USB_UNKNOWN=y
++CONFIG_RT2800_LIB=m
++CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB=m
++CONFIG_RT2X00_LIB_HT=y
++CONFIG_RT2X00_LIB_FIRMWARE=y
++CONFIG_RT2X00_LIB_CRYPTO=y
++CONFIG_RT2X00_LIB_LEDS=y
++# CONFIG_RT2X00_DEBUG is not set
+ CONFIG_RTL8192CU=m
++CONFIG_RTLWIFI=m
++CONFIG_RTL8192C_COMMON=m
+ CONFIG_WL1251=m
++# CONFIG_WL1251_SPI is not set
+ CONFIG_WL1251_SDIO=m
+ CONFIG_WL12XX_MENU=m
+ CONFIG_WL12XX=m
++# CONFIG_WL12XX_HT is not set
++# CONFIG_WL12XX_SPI is not set
+ CONFIG_WL12XX_SDIO=m
++# CONFIG_WL12XX_SDIO_TEST is not set
++CONFIG_WL12XX_PLATFORM_DATA=y
+ CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW_DEBUG is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
+ # CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
+ CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
+ # CONFIG_KEYBOARD_ATKBD is not set
+ CONFIG_KEYBOARD_QT1070=y
++# CONFIG_KEYBOARD_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
+ CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_MCS is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
+ # CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
+ CONFIG_TOUCHSCREEN_ATMEL_MXT=m
++# CONFIG_TOUCHSCREEN_BU21013 is not set
++# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
++# CONFIG_TOUCHSCREEN_DYNAPRO is not set
++# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+ CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++# CONFIG_TOUCHSCREEN_ST1232 is not set
++# CONFIG_TOUCHSCREEN_TPS6507X is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_LIBPS2 is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=8
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_DMA=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_TTY_PRINTK is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
+ # CONFIG_I2C_COMPAT is not set
+ CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_MUX is not set
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
+ CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_PXA_PCI is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_XILINX is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_DIOLAN_U2C is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
+ CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
+ CONFIG_SPI_ATMEL=y
++CONFIG_SPI_ATMEL_DMA=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
+ CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX7300 is not set
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCF857X is not set
++# CONFIG_GPIO_SX150X is not set
++# CONFIG_GPIO_ADP5588 is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB=m
++CONFIG_SSB_BLOCKIO=y
++CONFIG_SSB_SDIOHOST_POSSIBLE=y
++CONFIG_SSB_SDIOHOST=y
++# CONFIG_SSB_SILENT is not set
++# CONFIG_SSB_DEBUG is not set
+ # CONFIG_MFD_SUPPORT is not set
++# CONFIG_REGULATOR is not set
+ CONFIG_MEDIA_SUPPORT=y
++
++#
++# Multimedia core support
++#
+ CONFIG_MEDIA_CONTROLLER=y
+ CONFIG_VIDEO_DEV=y
++CONFIG_VIDEO_V4L2_COMMON=y
+ CONFIG_VIDEO_V4L2_SUBDEV_API=y
++# CONFIG_DVB_CORE is not set
++CONFIG_VIDEO_MEDIA=y
++
++#
++# Multimedia drivers
++#
++CONFIG_RC_CORE=y
++CONFIG_LIRC=y
++CONFIG_RC_MAP=y
++CONFIG_IR_NEC_DECODER=y
++CONFIG_IR_RC5_DECODER=y
++CONFIG_IR_RC6_DECODER=y
++CONFIG_IR_JVC_DECODER=y
++CONFIG_IR_SONY_DECODER=y
++CONFIG_IR_RC5_SZ_DECODER=y
++CONFIG_IR_LIRC_CODEC=y
++# CONFIG_IR_IMON is not set
++# CONFIG_IR_MCEUSB is not set
++# CONFIG_IR_STREAMZAP is not set
++# CONFIG_RC_LOOPBACK is not set
++# CONFIG_MEDIA_ATTACH is not set
++CONFIG_MEDIA_TUNER=y
++CONFIG_MEDIA_TUNER_CUSTOMISE=y
++
++#
++# Customize TV tuners
++#
++CONFIG_MEDIA_TUNER_SIMPLE=m
++CONFIG_MEDIA_TUNER_TDA8290=m
++CONFIG_MEDIA_TUNER_TDA827X=m
++CONFIG_MEDIA_TUNER_TDA18271=m
++CONFIG_MEDIA_TUNER_TDA9887=m
++CONFIG_MEDIA_TUNER_TEA5761=m
++CONFIG_MEDIA_TUNER_TEA5767=m
++CONFIG_MEDIA_TUNER_MT20XX=m
++CONFIG_MEDIA_TUNER_MT2060=m
++CONFIG_MEDIA_TUNER_MT2266=m
++CONFIG_MEDIA_TUNER_MT2131=m
++CONFIG_MEDIA_TUNER_QT1010=m
++CONFIG_MEDIA_TUNER_XC2028=m
++CONFIG_MEDIA_TUNER_XC5000=m
++CONFIG_MEDIA_TUNER_MXL5005S=m
++CONFIG_MEDIA_TUNER_MXL5007T=m
++CONFIG_MEDIA_TUNER_MC44S803=m
++CONFIG_MEDIA_TUNER_MAX2165=m
++CONFIG_MEDIA_TUNER_TDA18218=m
++CONFIG_VIDEO_V4L2=y
++CONFIG_VIDEOBUF_GEN=y
++CONFIG_VIDEOBUF2_CORE=y
++CONFIG_VIDEOBUF2_MEMOPS=y
++CONFIG_VIDEOBUF2_DMA_CONTIG=y
++CONFIG_VIDEO_CAPTURE_DRIVERS=y
+ CONFIG_VIDEO_AT91SAM9X5=y
++# CONFIG_VIDEO_ADV_DEBUG is not set
+ CONFIG_VIDEO_FIXED_MINOR_RANGES=y
++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
++CONFIG_VIDEO_IR_I2C=y
++
++#
++# Encoders/decoders and other helper chips
++#
++
++#
++# Audio decoders
++#
++# CONFIG_VIDEO_TVAUDIO is not set
++# CONFIG_VIDEO_TDA7432 is not set
++# CONFIG_VIDEO_TDA9840 is not set
++# CONFIG_VIDEO_TEA6415C is not set
++# CONFIG_VIDEO_TEA6420 is not set
++# CONFIG_VIDEO_MSP3400 is not set
++# CONFIG_VIDEO_CS5345 is not set
++# CONFIG_VIDEO_CS53L32A is not set
++# CONFIG_VIDEO_M52790 is not set
++# CONFIG_VIDEO_TLV320AIC23B is not set
++# CONFIG_VIDEO_WM8775 is not set
++# CONFIG_VIDEO_WM8739 is not set
++# CONFIG_VIDEO_VP27SMPX is not set
++
++#
++# RDS decoders
++#
++# CONFIG_VIDEO_SAA6588 is not set
++
++#
++# Video decoders
++#
++# CONFIG_VIDEO_ADV7180 is not set
++# CONFIG_VIDEO_BT819 is not set
++# CONFIG_VIDEO_BT856 is not set
++# CONFIG_VIDEO_BT866 is not set
++# CONFIG_VIDEO_KS0127 is not set
++# CONFIG_VIDEO_OV7670 is not set
++# CONFIG_VIDEO_MT9V011 is not set
++# CONFIG_VIDEO_TCM825X is not set
++# CONFIG_VIDEO_SAA7110 is not set
++# CONFIG_VIDEO_SAA711X is not set
++# CONFIG_VIDEO_SAA717X is not set
++# CONFIG_VIDEO_SAA7191 is not set
++# CONFIG_VIDEO_TVP514X is not set
++# CONFIG_VIDEO_TVP5150 is not set
++# CONFIG_VIDEO_TVP7002 is not set
++# CONFIG_VIDEO_VPX3220 is not set
++
++#
++# Video and audio decoders
++#
++# CONFIG_VIDEO_CX25840 is not set
++
++#
++# MPEG video encoders
++#
++# CONFIG_VIDEO_CX2341X is not set
++
++#
++# Video encoders
++#
++# CONFIG_VIDEO_SAA7127 is not set
++# CONFIG_VIDEO_SAA7185 is not set
++# CONFIG_VIDEO_ADV7170 is not set
++# CONFIG_VIDEO_ADV7175 is not set
++# CONFIG_VIDEO_THS7303 is not set
++# CONFIG_VIDEO_ADV7343 is not set
++# CONFIG_VIDEO_AK881X is not set
++
++#
++# Video improvement chips
++#
++# CONFIG_VIDEO_UPD64031A is not set
++# CONFIG_VIDEO_UPD64083 is not set
++# CONFIG_VIDEO_CPIA2 is not set
++# CONFIG_VIDEO_TIMBERDALE is not set
++# CONFIG_VIDEO_SR030PC30 is not set
++# CONFIG_VIDEO_NOON010PC30 is not set
+ CONFIG_SOC_CAMERA=y
++# CONFIG_SOC_CAMERA_IMX074 is not set
++# CONFIG_SOC_CAMERA_MT9M001 is not set
++# CONFIG_SOC_CAMERA_MT9M111 is not set
++# CONFIG_SOC_CAMERA_MT9T031 is not set
++# CONFIG_SOC_CAMERA_MT9T112 is not set
++# CONFIG_SOC_CAMERA_MT9V022 is not set
++# CONFIG_SOC_CAMERA_RJ54N1 is not set
++# CONFIG_SOC_CAMERA_TW9910 is not set
++# CONFIG_SOC_CAMERA_PLATFORM is not set
+ CONFIG_SOC_CAMERA_OV2640=y
++# CONFIG_SOC_CAMERA_OV6650 is not set
++# CONFIG_SOC_CAMERA_OV772X is not set
++# CONFIG_SOC_CAMERA_OV9640 is not set
++# CONFIG_SOC_CAMERA_OV9740 is not set
+ CONFIG_VIDEO_ATMEL_ISI=y
++# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
++# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+ # CONFIG_V4L_USB_DRIVERS is not set
+-CONFIG_VIDEO_AT91SAM9X5=y
++# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+ # CONFIG_RADIO_ADAPTERS is not set
++
++#
++# Graphics support
++#
++CONFIG_HAVE_FB_ATMEL=y
++CONFIG_FB_ATMEL_HLCD=y
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_WMT_GE_ROPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
++# CONFIG_FB_UDL is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
+ CONFIG_BACKLIGHT_LCD_SUPPORT=y
+ # CONFIG_LCD_CLASS_DEVICE is not set
+ CONFIG_BACKLIGHT_CLASS_DEVICE=y
+ CONFIG_BACKLIGHT_ATMEL_LCDC=y
++CONFIG_BACKLIGHT_GENERIC=y
++# CONFIG_BACKLIGHT_ADP8860 is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
+ CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+ CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_HWDEP=m
++CONFIG_SND_RAWMIDI=m
++CONFIG_SND_JACK=y
+ CONFIG_SND_SEQUENCER=y
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
+ CONFIG_SND_MIXER_OSS=y
+ CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_SEQUENCER_OSS is not set
++# CONFIG_SND_HRTIMER is not set
++# CONFIG_SND_DYNAMIC_MINORS is not set
+ # CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_RAWMIDI_SEQ=m
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
+ # CONFIG_SND_DRIVERS is not set
+ # CONFIG_SND_ARM is not set
++
++#
++# Atmel devices (AVR32 and AT91)
++#
++# CONFIG_SND_ATMEL_AC97C is not set
+ # CONFIG_SND_SPI is not set
++CONFIG_SND_USB=y
+ CONFIG_SND_USB_AUDIO=m
++# CONFIG_SND_USB_UA101 is not set
++# CONFIG_SND_USB_CAIAQ is not set
++# CONFIG_SND_USB_6FIRE is not set
+ CONFIG_SND_SOC=y
++# CONFIG_SND_SOC_CACHE_LZO is not set
+ CONFIG_SND_ATMEL_SOC=y
++CONFIG_SND_ATMEL_SOC_SSC=y
+ CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_WM8731=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++# CONFIG_HID_3M_PCT is not set
++# CONFIG_HID_A4TECH is not set
++# CONFIG_HID_ACRUX is not set
++# CONFIG_HID_APPLE is not set
++# CONFIG_HID_BELKIN is not set
++# CONFIG_HID_CANDO is not set
++# CONFIG_HID_CHERRY is not set
++# CONFIG_HID_CHICONY is not set
++# CONFIG_HID_PRODIKEYS is not set
++# CONFIG_HID_CYPRESS is not set
++# CONFIG_HID_DRAGONRISE is not set
++# CONFIG_HID_EMS_FF is not set
++# CONFIG_HID_EZKEY is not set
++# CONFIG_HID_KEYTOUCH is not set
++# CONFIG_HID_KYE is not set
++# CONFIG_HID_UCLOGIC is not set
++# CONFIG_HID_WALTOP is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_TWINHAN is not set
++# CONFIG_HID_KENSINGTON is not set
++# CONFIG_HID_LCPOWER is not set
++# CONFIG_HID_LOGITECH is not set
++# CONFIG_HID_MICROSOFT is not set
++# CONFIG_HID_MOSART is not set
++# CONFIG_HID_MONTEREY is not set
++# CONFIG_HID_MULTITOUCH is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_ORTEK is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_PICOLCD is not set
++# CONFIG_HID_QUANTA is not set
++# CONFIG_HID_ROCCAT is not set
++# CONFIG_HID_ROCCAT_ARVO is not set
++# CONFIG_HID_ROCCAT_KONE is not set
++# CONFIG_HID_ROCCAT_KONEPLUS is not set
++# CONFIG_HID_ROCCAT_KOVAPLUS is not set
++# CONFIG_HID_ROCCAT_PYRA is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_STANTUM is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_ZEROPLUS is not set
++# CONFIG_HID_ZYDACRON is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
+ CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
+ # CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MON is not set
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
+ CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+ # CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
+ CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
+ CONFIG_USB_LIBUSUAL=y
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
+ CONFIG_USB_ZERO=m
++# CONFIG_USB_AUDIO is not set
+ CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_G_NCM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FUNCTIONFS is not set
+ CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
+ CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
+ CONFIG_USB_CDC_COMPOSITE=m
+ CONFIG_USB_G_MULTI=m
++CONFIG_USB_G_MULTI_RNDIS=y
+ CONFIG_USB_G_MULTI_CDC=y
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++# CONFIG_USB_G_WEBCAM is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
+ CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
+ # CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_AT91 is not set
+ CONFIG_MMC_ATMELMCI=y
+ CONFIG_MMC_ATMELMCI_DMA=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_LM3530 is not set
++# CONFIG_LEDS_PCA9532 is not set
+ CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_LP5521 is not set
++# CONFIG_LEDS_LP5523 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_BD2802 is not set
++# CONFIG_LEDS_LT3593 is not set
+ CONFIG_LEDS_TRIGGERS=y
++
++#
++# LED Triggers
++#
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+ CONFIG_LEDS_TRIGGER_GPIO=y
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS3232 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_ISL12022 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_BQ32K is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
+ CONFIG_RTC_DRV_AT91RM9200=y
+ CONFIG_DMADEVICES=y
++# CONFIG_DMADEVICES_DEBUG is not set
++
++#
++# DMA Devices
++#
++# CONFIG_DW_DMAC is not set
+ CONFIG_AT_HDMAC=y
++# CONFIG_TIMB_DMA is not set
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++# CONFIG_ASYNC_TX_DMA is not set
+ CONFIG_DMATEST=m
++# CONFIG_AUXDISPLAY is not set
+ CONFIG_UIO=y
+ CONFIG_UIO_PDRV=m
+ CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
+ CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
+ CONFIG_FANOTIFY=y
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_ECRYPT_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
+ CONFIG_UBIFS_FS=y
+ CONFIG_UBIFS_FS_XATTR=y
+ CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_LOGFS is not set
+ CONFIG_CRAMFS=m
+ CONFIG_SQUASHFS=m
++# CONFIG_SQUASHFS_XATTR is not set
++# CONFIG_SQUASHFS_LZO is not set
++# CONFIG_SQUASHFS_XZ is not set
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
+ CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
++# CONFIG_NFS_USE_LEGACY_DNS is not set
++CONFIG_NFS_USE_KERNEL_DNS=y
++# CONFIG_NFS_USE_NEW_IDMAPPER is not set
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
+ CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
+ CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
+ CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
+ CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_LKDTM is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
+ CONFIG_DEBUG_USER=y
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++CONFIG_KEYS=y
++# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
+ CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_GHASH is not set
++# CONFIG_CRYPTO_MD4 is not set
+ CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
+ CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_ZLIB is not set
++CONFIG_CRYPTO_LZO=y
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++# CONFIG_CRYPTO_USER_API_HASH is not set
++# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+ # CONFIG_CRYPTO_HW is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++# CONFIG_CRC_T10DIF is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++# CONFIG_XZ_DEC is not set
++# CONFIG_XZ_DEC_BCJ is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++CONFIG_AVERAGE=y
+diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
+index 42a7283..76b1232 100644
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -434,7 +434,8 @@ config MACH_AT91SAM9M10G45EK
+ 	select HAVE_NAND_ATMEL_BUSWIDTH_16
+ 	select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ 	help
+-	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
++	  Select this if you are using Atmel's AT91SAM9M10G45EK Evaluation Kit.
++	  Can also be used for the AT91SAM9G45EKES and AT91SAM9M10EKES
+ 	  "ES" at the end of the name means that this board is an
+ 	  Engineering Sample.
+ 
+-- 
+1.7.5.4
+
diff --git a/recipes/linux/linux-2.6.39.2/at91/0003-Revert-diopsis-NAND-patch-affected-NOR-flash.patch b/recipes/linux/linux-2.6.39.2/at91/0003-Revert-diopsis-NAND-patch-affected-NOR-flash.patch
new file mode 100644
index 0000000000..6c1f2c17bb
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/0003-Revert-diopsis-NAND-patch-affected-NOR-flash.patch
@@ -0,0 +1,49 @@
+From 883af6280b37a4cf89de40e416c8b38c0d48fa95 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf_samuelsson@telia.com>
+Date: Sun, 30 Oct 2011 13:23:30 +0100
+Subject: [PATCH 3/3] Revert diopsis NAND patch, affected NOR flash
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@telia.com>
+---
+ arch/arm/mach-at91/board-at572d940hf_ek.c |   21 ++++++++++++---------
+ 1 files changed, 12 insertions(+), 9 deletions(-)
+
+diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
+index d737aa8..3929f1c 100644
+--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
++++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
+@@ -115,19 +115,22 @@ static struct at91_eth_data __initdata eb_eth_data = {
+ 
+ static struct mtd_partition eb_nor_partitions[] = {
+ 	{
+-		.name   = "Bootstrap",
+-		.offset = 0,
+-		.size   = 4 * SZ_1M,
++		.name		= "Raw Environment",
++		.offset		= 0,
++		.size		= SZ_4M,
++		.mask_flags	= 0,
+ 	},
+ 	{
+-		.name	= "Root File System",
+-		.offset	= MTDPART_OFS_NXTBLK,
+-		.size	= CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++		.name		= "OS FS",
++		.offset		= MTDPART_OFS_APPEND,
++		.size		= 3 * SZ_1M,
++		.mask_flags	= 0,
+ 	},
+ 	{
+-		.name	= "Data",
+-		.offset	= MTDPART_OFS_NXTBLK,
+-		.size	= MTDPART_SIZ_FULL,
++		.name		= "APP FS",
++		.offset		= MTDPART_OFS_APPEND,
++		.size		= MTDPART_SIZ_FULL,
++		.mask_flags	= 0,
+ 	},
+ };
+ 
+-- 
+1.7.5.4
+
diff --git a/recipes/linux/linux-2.6.39.2/at91/0004-Add-MMC-debugging.patch b/recipes/linux/linux-2.6.39.2/at91/0004-Add-MMC-debugging.patch
new file mode 100644
index 0000000000..7c22e60649
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/0004-Add-MMC-debugging.patch
@@ -0,0 +1,57 @@
+From e5752598abfe7037ca5e1582a781ad06cd685313 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf_samuelsson@telia.com>
+Date: Sun, 30 Oct 2011 22:35:40 +0100
+Subject: [PATCH 1/2] Add MMC debugging
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@telia.com>
+---
+ arch/arm/mach-at91/at91sam9260_devices.c |    2 ++
+ arch/arm/mach-at91/board-sam9g20ek.c     |    5 ++++-
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
+index 07eb7b0..8c1738f 100644
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -332,6 +332,7 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+ 			switch (i) {
+ 			case 0:
+ 				/* CMD */
++				printk(KERN_INFO, "AT91 SD slot 0 init");
+ 				at91_set_A_periph(AT91_PIN_PA7, 1);
+ 				/* DAT0, maybe DAT1..DAT3 */
+ 				at91_set_A_periph(AT91_PIN_PA6, 1);
+@@ -344,6 +345,7 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+ 				break;
+ 			case 1:
+ 				/* CMD */
++				printk(KERN_INFO, "AT91 SD slot 1 init");
+ 				at91_set_B_periph(AT91_PIN_PA1, 1);
+ 				/* DAT0, maybe DAT1..DAT3 */
+ 				at91_set_B_periph(AT91_PIN_PA0, 1);
+diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
+index 7e110e1..1e0135e 100644
+--- a/arch/arm/mach-at91/board-sam9g20ek.c
++++ b/arch/arm/mach-at91/board-sam9g20ek.c
+@@ -56,7 +56,7 @@
+ #define HAVE_2MMC	(1 << 0)
+ static int inline ek_have_2mmc(void)
+ {
+-	return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
++	return	machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
+ }
+ 
+ 
+@@ -241,6 +241,9 @@ static void __init ek_add_device_mmc(void)
+ 	if (ek_have_2mmc()) {
+ 		ek_mmc_data.slot[0].bus_width = 4;
+ 		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
++		printk(KERN_INFO, "AT91 MCI: Two MMC Slots");
++	} else {
++		printk(KERN_INFO, "AT91 MCI: One MMC Slot");
+ 	}
+ 	at91_add_device_mci(0, &ek_mmc_data);
+ #else
+-- 
+1.7.5.4
+
diff --git a/recipes/linux/linux-2.6.39.2/at91/0005-Add-sam9g20_2mmc-defconfig-with-MMC-debugging.patch b/recipes/linux/linux-2.6.39.2/at91/0005-Add-sam9g20_2mmc-defconfig-with-MMC-debugging.patch
new file mode 100644
index 0000000000..da39b70498
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/0005-Add-sam9g20_2mmc-defconfig-with-MMC-debugging.patch
@@ -0,0 +1,1634 @@
+From 554272fe418464e42792acff3eced02afdf49d1c Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf_samuelsson@telia.com>
+Date: Sun, 30 Oct 2011 22:36:16 +0100
+Subject: [PATCH 2/2] Add sam9g20_2mmc defconfig with MMC debugging
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@telia.com>
+---
+ arch/arm/configs/at91sam9g20ek_2mmc_defconfig | 1614 +++++++++++++++++++++++++
+ 1 files changed, 1614 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/configs/at91sam9g20ek_2mmc_defconfig
+
+diff --git a/arch/arm/configs/at91sam9g20ek_2mmc_defconfig b/arch/arm/configs/at91sam9g20ek_2mmc_defconfig
+new file mode 100644
+index 0000000..db1785a
+--- /dev/null
++++ b/arch/arm/configs/at91sam9g20ek_2mmc_defconfig
+@@ -0,0 +1,1614 @@
++#
++# Automatically generated make config: don't edit
++# Linux/arm 2.6.39.2 Kernel Configuration
++# Sun Oct 30 22:33:12 2011
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_KTIME_SCALAR=y
++CONFIG_HAVE_PROC_CPU=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_NEED_DMA_MAP_STATE=y
++CONFIG_VECTORS_BASE=0xffff0000
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++CONFIG_HAVE_IRQ_WORK=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_CROSS_COMPILE=""
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_HAVE_KERNEL_LZO=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_LZMA is not set
++# CONFIG_KERNEL_LZO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_FHANDLE is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_HAVE_GENERIC_HARDIRQS=y
++
++#
++# IRQ subsystem
++#
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HAVE_SPARSE_IRQ=y
++CONFIG_GENERIC_IRQ_SHOW=y
++# CONFIG_SPARSE_IRQ is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TINY_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_NAMESPACES=y
++CONFIG_UTS_NS=y
++CONFIG_IPC_NS=y
++CONFIG_USER_NS=y
++CONFIG_PID_NS=y
++CONFIG_NET_NS=y
++# CONFIG_SCHED_AUTOGROUP is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++CONFIG_RD_XZ=y
++CONFIG_RD_LZO=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EXPERT is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++# CONFIG_EMBEDDED is not set
++CONFIG_HAVE_PERF_EVENTS=y
++CONFIG_PERF_USE_VMALLOC=y
++
++#
++# Kernel Performance Events And Counters
++#
++# CONFIG_PERF_EVENTS is not set
++# CONFIG_PERF_COUNTERS is not set
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_DMA_API_DEBUG=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
++CONFIG_BLK_DEV_BSG=y
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++CONFIG_INLINE_SPIN_UNLOCK=y
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++CONFIG_INLINE_READ_UNLOCK=y
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++CONFIG_INLINE_READ_UNLOCK_IRQ=y
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++CONFIG_INLINE_WRITE_UNLOCK=y
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_VEXPRESS is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CNS3XXX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_MXS is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_LPC32XX is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_NUC93X is not set
++# CONFIG_ARCH_TEGRA is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_SHMOBILE is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5P64X0 is not set
++# CONFIG_ARCH_S5P6442 is not set
++# CONFIG_ARCH_S5PC100 is not set
++# CONFIG_ARCH_S5PV210 is not set
++# CONFIG_ARCH_EXYNOS4 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_TCC_926 is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_U8500 is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_PLAT_SPEAR is not set
++# CONFIG_ARCH_VT8500 is not set
++CONFIG_HAVE_AT91_DATAFLASH_CARD=y
++CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
++CONFIG_HAVE_AT91_USART3=y
++CONFIG_HAVE_AT91_USART4=y
++CONFIG_HAVE_AT91_USART5=y
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++CONFIG_ARCH_AT91SAM9G20=y
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91SAM9X5 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT572D940HF is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9G20 Board Type
++#
++CONFIG_MACH_AT91SAM9G20EK=y
++CONFIG_MACH_AT91SAM9G20EK_2MMC=y
++# CONFIG_MACH_CPU9G20 is not set
++# CONFIG_MACH_ACMENETUSFOXG20 is not set
++# CONFIG_MACH_PORTUXG20 is not set
++# CONFIG_MACH_STAMP9G20 is not set
++# CONFIG_MACH_PCONTROL_G20 is not set
++# CONFIG_MACH_GSIA18S is not set
++
++#
++# AT91SAM9260/AT91SAM9G20 boards
++#
++# CONFIG_MACH_SNAPPER_9260 is not set
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
++CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_AT91_SLOW_CLOCK is not set
++CONFIG_AT91_TIMER_HZ=100
++CONFIG_AT91_EARLY_DBGU=y
++# CONFIG_AT91_EARLY_USART0 is not set
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_AT91_EARLY_USART4 is not set
++# CONFIG_AT91_EARLY_USART5 is not set
++# CONFIG_KEYBOARD_GPIO_POLLED is not set
++
++#
++# System MMU
++#
++
++#
++# Processor Type
++#
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++CONFIG_CPU_USE_DOMAINS=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++CONFIG_AEABI=y
++# CONFIG_OABI_COMPAT is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_HAVE_MEMBLOCK=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=999999
++# CONFIG_COMPACTION is not set
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_NEED_PER_CPU_KM=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++CONFIG_LEDS=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++# CONFIG_SECCOMP is not set
++# CONFIG_CC_STACKPROTECTOR is not set
++# CONFIG_DEPRECATED_PARAM_STRUCT is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE=" debug"
++# CONFIG_CMDLINE_FORCE is not set
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++# CONFIG_CRASH_DUMP is not set
++# CONFIG_AUTO_ZRELADDR is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_PM_SLEEP=y
++# CONFIG_PM_RUNTIME is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE_DEMUX is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_L2TP is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++# CONFIG_BATMAN_ADV is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++# CONFIG_CAIF is not set
++# CONFIG_CEPH_LIB is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH=""
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_SM_FTL is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
++# CONFIG_MTD_DATAFLASH_OTP is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND_ECC=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_BCH is not set
++# CONFIG_MTD_SM_COMMON is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_BLK_DEV_RBD is not set
++# CONFIG_SENSORS_LIS3LV02D is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_SCSI_MOD=y
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_TARGET_CORE is not set
++CONFIG_HAVE_NET_MACB=y
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_MII=y
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_BCM63XX_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_MICREL_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8851 is not set
++# CONFIG_KS8851_MLL is not set
++# CONFIG_FTMAC100 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_IPHETH is not set
++# CONFIG_WAN is not set
++
++#
++# CAIF transport drivers
++#
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_SERIO_PS2MULT is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=16
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_N_GSM is not set
++CONFIG_DEVKMEM=y
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++# CONFIG_SERIAL_MAX3100 is not set
++# CONFIG_SERIAL_MAX3107 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_TIMBERDALE is not set
++# CONFIG_SERIAL_ALTERA_JTAGUART is not set
++# CONFIG_SERIAL_ALTERA_UART is not set
++# CONFIG_SERIAL_IFX6X60 is not set
++# CONFIG_HVC_DCC is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_RAMOOPS is not set
++# CONFIG_I2C is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ALTERA is not set
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++# CONFIG_SPI_OC_TINY is not set
++# CONFIG_SPI_PXA2XX_PCI is not set
++# CONFIG_SPI_XILINX is not set
++# CONFIG_SPI_DESIGNWARE is not set
++
++#
++# SPI Protocol Masters
++#
++CONFIG_SPI_SPIDEV=y
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++
++#
++# PPS generators support
++#
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++# CONFIG_GPIO_BASIC_MMIO is not set
++# CONFIG_GPIO_IT8761E is not set
++
++#
++# I2C GPIO expanders:
++#
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++# CONFIG_GPIO_74X164 is not set
++
++#
++# AC97 GPIO expanders:
++#
++
++#
++# MODULbus GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++CONFIG_MFD_SUPPORT=y
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_MFD_WM831X_SPI is not set
++# CONFIG_MFD_MC13XXX is not set
++# CONFIG_ABX500_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_SEQUENCER=y
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_RAWMIDI_SEQ is not set
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_ALOOP is not set
++# CONFIG_SND_VIRMIDI is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++CONFIG_SND_ARM=y
++
++#
++# Atmel devices (AVR32 and AT91)
++#
++# CONFIG_SND_ATMEL_AC97C is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_USB=y
++# CONFIG_SND_USB_AUDIO is not set
++# CONFIG_SND_USB_UA101 is not set
++# CONFIG_SND_USB_CAIAQ is not set
++# CONFIG_SND_USB_6FIRE is not set
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++# CONFIG_HID_3M_PCT is not set
++CONFIG_HID_A4TECH=y
++# CONFIG_HID_ACRUX is not set
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++# CONFIG_HID_CANDO is not set
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++# CONFIG_HID_PRODIKEYS is not set
++CONFIG_HID_CYPRESS=y
++# CONFIG_HID_DRAGONRISE is not set
++# CONFIG_HID_EMS_FF is not set
++CONFIG_HID_EZKEY=y
++# CONFIG_HID_KEYTOUCH is not set
++CONFIG_HID_KYE=y
++# CONFIG_HID_UCLOGIC is not set
++# CONFIG_HID_WALTOP is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_TWINHAN is not set
++CONFIG_HID_KENSINGTON=y
++# CONFIG_HID_LCPOWER is not set
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++# CONFIG_LOGIG940_FF is not set
++# CONFIG_LOGIWII_FF is not set
++CONFIG_HID_MICROSOFT=y
++# CONFIG_HID_MOSART is not set
++CONFIG_HID_MONTEREY=y
++# CONFIG_HID_MULTITOUCH is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_ORTEK is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_PICOLCD is not set
++# CONFIG_HID_QUANTA is not set
++# CONFIG_HID_ROCCAT is not set
++# CONFIG_HID_ROCCAT_ARVO is not set
++# CONFIG_HID_ROCCAT_KONE is not set
++# CONFIG_HID_ROCCAT_KONEPLUS is not set
++# CONFIG_HID_ROCCAT_KOVAPLUS is not set
++# CONFIG_HID_ROCCAT_PYRA is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_STANTUM is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_ZEROPLUS is not set
++# CONFIG_HID_ZYDACRON is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_REALTEK is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_STORAGE_ENE_UB6250 is not set
++# CONFIG_USB_UAS is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_YUREX is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_FUSB300 is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA_U2O is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++# CONFIG_USB_AUDIO is not set
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_G_NCM is not set
++CONFIG_USB_GADGETFS=m
++# CONFIG_USB_FUNCTIONFS is not set
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_G_MULTI is not set
++# CONFIG_USB_G_HID is not set
++# CONFIG_USB_G_DBGP is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_USB_ULPI is not set
++# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_MMC=y
++CONFIG_MMC_DEBUG=y
++# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_MMC_CLKGATE is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_MINORS=8
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++CONFIG_MMC_TEST=y
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_AT91 is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MMC_DW is not set
++# CONFIG_MMC_USHC is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_LT3593 is not set
++CONFIG_LEDS_TRIGGERS=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_NFC_DEVICES is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_RTC_DRV_AT91SAM9_RTT=0
++CONFIG_RTC_DRV_AT91SAM9_GPBR=0
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_FANOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_QUOTACTL is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++CONFIG_GENERIC_ACL=y
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_UBIFS_FS is not set
++# CONFIG_LOGFS is not set
++CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_PSTORE is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_CEPH_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_SECTION_MISMATCH is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++# CONFIG_LOCKUP_DETECTOR is not set
++# CONFIG_HARDLOCKUP_DETECTOR is not set
++# CONFIG_DETECT_HUNG_TASK is not set
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_SPARSE_RCU_POINTER is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++CONFIG_DEBUG_MEMORY_INIT=y
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_TEST_LIST_SORT is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
++CONFIG_HAVE_DYNAMIC_FTRACE=y
++CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
++CONFIG_HAVE_C_RECORDMCOUNT=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++CONFIG_DYNAMIC_DEBUG=y
++# CONFIG_DMA_API_DEBUG is not set
++# CONFIG_ATOMIC64_SELFTEST is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++# CONFIG_TEST_KSTRTOX is not set
++# CONFIG_STRICT_DEVMEM is not set
++CONFIG_ARM_UNWIND=y
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY_DMESG_RESTRICT is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++# CONFIG_CRYPTO is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_XZ_DEC=y
++CONFIG_XZ_DEC_X86=y
++CONFIG_XZ_DEC_POWERPC=y
++CONFIG_XZ_DEC_IA64=y
++CONFIG_XZ_DEC_ARM=y
++CONFIG_XZ_DEC_ARMTHUMB=y
++CONFIG_XZ_DEC_SPARC=y
++CONFIG_XZ_DEC_BCJ=y
++# CONFIG_XZ_DEC_TEST is not set
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_DECOMPRESS_XZ=y
++CONFIG_DECOMPRESS_LZO=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
++CONFIG_GENERIC_ATOMIC64=y
++# CONFIG_AVERAGE is not set
+-- 
+1.7.5.4
+
diff --git a/recipes/linux/linux-2.6.39.2/at91/series b/recipes/linux/linux-2.6.39.2/at91/series
new file mode 100644
index 0000000000..eb4c26290c
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91/series
@@ -0,0 +1,3 @@
+	file://at91/0004-Add-MMC-debugging.patch \
+	file://at91/0005-Add-sam9g20_2mmc-defconfig-with-MMC-debugging.patch \
+
diff --git a/recipes/linux/linux-2.6.39.2/at91cap9adk/defconfig b/recipes/linux/linux-2.6.39.2/at91cap9adk/defconfig
new file mode 100644
index 0000000000..84a059d6b2
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91cap9adk/defconfig
@@ -0,0 +1,1646 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:05:03 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+CONFIG_ARCH_AT91CAP9=y
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91CAP9 Board Type
+#
+CONFIG_MACH_AT91CAP9ADK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91rm9200/defconfig b/recipes/linux/linux-2.6.39.2/at91rm9200/defconfig
new file mode 100644
index 0000000000..747b989816
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91rm9200/defconfig
@@ -0,0 +1,2204 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:06:54 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_RCU is not set
+# CONFIG_TINY_PREEMPT_RCU is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_AT91_USART3=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PCMCIA is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_PLATRAM=y
+# CONFIG_MTD_LATCH_ADDR is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_MCS7830 is not set
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+# CONFIG_SENSORS_GPIO_FAN is not set
+CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+CONFIG_SENSORS_LM63=m
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_MAX1619=m
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+# CONFIG_SENSORS_W83795 is not set
+CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_S1D13XXX=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=y
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SAMBA is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_MASS_STORAGE=m
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_DEPRECATED=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9260ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9260ek/defconfig
new file mode 100644
index 0000000000..c69b41809a
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9260ek/defconfig
@@ -0,0 +1,1489 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:07:55 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+CONFIG_MACH_AT91SAM9260EK=y
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+# CONFIG_MACH_CPU9260 is not set
+# CONFIG_MACH_FLEXIBITY is not set
+
+#
+# AT91SAM9260/AT91SAM9G20 boards
+#
+# CONFIG_MACH_SNAPPER_9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+# CONFIG_GPIO_PCA953X is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9261ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9261ek/defconfig
new file mode 100644
index 0000000000..c653e82c0e
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9261ek/defconfig
@@ -0,0 +1,1709 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:10:03 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+CONFIG_ARCH_AT91SAM9261=y
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9261 Board Type
+#
+CONFIG_MACH_AT91SAM9261EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_INTSRAM is not set
+# CONFIG_FB_ATMEL_STN is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9263ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9263ek/defconfig
new file mode 100644
index 0000000000..c2c3f6ae3b
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9263ek/defconfig
@@ -0,0 +1,1647 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:10:40 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+# CONFIG_MACH_USB_A9263 is not set
+# CONFIG_MACH_NEOCORE926 is not set
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g10ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9g10ek/defconfig
new file mode 100644
index 0000000000..5806e981cc
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g10ek/defconfig
@@ -0,0 +1,1708 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:16:07 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9G10=y
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G10 Board Type
+#
+CONFIG_MACH_AT91SAM9G10EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_ATMEL_STN is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g20ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9g20ek/defconfig
new file mode 100644
index 0000000000..22952e1a93
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g20ek/defconfig
@@ -0,0 +1,1567 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:12:24 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+# CONFIG_MACH_CPU9G20 is not set
+# CONFIG_MACH_ACMENETUSFOXG20 is not set
+# CONFIG_MACH_PORTUXG20 is not set
+# CONFIG_MACH_STAMP9G20 is not set
+# CONFIG_MACH_PCONTROL_G20 is not set
+# CONFIG_MACH_GSIA18S is not set
+
+#
+# AT91SAM9260/AT91SAM9G20 boards
+#
+# CONFIG_MACH_SNAPPER_9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig
new file mode 100644
index 0000000000..36258a8ed8
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig
@@ -0,0 +1 @@
+/home/ulf/projects/OE_atmel/openembedded/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci.with debugfs
\ No newline at end of file
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.at91_mci b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.at91_mci
new file mode 100644
index 0000000000..22952e1a93
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.at91_mci
@@ -0,0 +1,1567 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:12:24 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+# CONFIG_MACH_CPU9G20 is not set
+# CONFIG_MACH_ACMENETUSFOXG20 is not set
+# CONFIG_MACH_PORTUXG20 is not set
+# CONFIG_MACH_STAMP9G20 is not set
+# CONFIG_MACH_PCONTROL_G20 is not set
+# CONFIG_MACH_GSIA18S is not set
+
+#
+# AT91SAM9260/AT91SAM9G20 boards
+#
+# CONFIG_MACH_SNAPPER_9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci
new file mode 100644
index 0000000000..e6e30191ce
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci
@@ -0,0 +1,1567 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:52:49 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+# CONFIG_MACH_CPU9G20 is not set
+# CONFIG_MACH_ACMENETUSFOXG20 is not set
+# CONFIG_MACH_PORTUXG20 is not set
+# CONFIG_MACH_STAMP9G20 is not set
+# CONFIG_MACH_PCONTROL_G20 is not set
+# CONFIG_MACH_GSIA18S is not set
+
+#
+# AT91SAM9260/AT91SAM9G20 boards
+#
+# CONFIG_MACH_SNAPPER_9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci.with debugfs b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci.with debugfs
new file mode 100644
index 0000000000..db1785aaa0
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g20ek_2mmc/defconfig.atmel_mci.with debugfs
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 22:33:12 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_DATAFLASH_CARD=y
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+# CONFIG_MACH_CPU9G20 is not set
+# CONFIG_MACH_ACMENETUSFOXG20 is not set
+# CONFIG_MACH_PORTUXG20 is not set
+# CONFIG_MACH_STAMP9G20 is not set
+# CONFIG_MACH_PCONTROL_G20 is not set
+# CONFIG_MACH_GSIA18S is not set
+
+#
+# AT91SAM9260/AT91SAM9G20 boards
+#
+# CONFIG_MACH_SNAPPER_9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=y
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g35ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9g35ek/defconfig
new file mode 100644
index 0000000000..b3f02da3a3
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g35ek/defconfig
@@ -0,0 +1,2225 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Fri Oct 21 15:57:20 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+CONFIG_ARCH_AT91SAM9X5=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9x5 Series Board Type
+#
+CONFIG_MACH_AT91SAM9X5EK=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=m
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_FW=m
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+# CONFIG_CAN_BCM is not set
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_AT91=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_PMECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCB_CLKSRC_32BIT=y
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_HT is not set
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_DMA=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_AT91SAM9X5=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV2640=y
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+CONFIG_VIDEO_ATMEL_ISI=y
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+CONFIG_FB_ATMEL_HLCD=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9g45ekes/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9g45ekes/defconfig
new file mode 100644
index 0000000000..9aeabf52f7
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9g45ekes/defconfig
@@ -0,0 +1,2226 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:19:56 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+CONFIG_ARCH_AT91SAM9G45=y
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G45 Board Type
+#
+CONFIG_MACH_AT91SAM9M10G45EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=m
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_FW=m
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+# CONFIG_CAN_BCM is not set
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_PMECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_HT is not set
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV2640=y
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+CONFIG_VIDEO_ATMEL_ISI=y
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9m10ekes/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9m10ekes/defconfig
new file mode 100644
index 0000000000..9aeabf52f7
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9m10ekes/defconfig
@@ -0,0 +1,2226 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:19:56 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+CONFIG_ARCH_AT91SAM9G45=y
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G45 Board Type
+#
+CONFIG_MACH_AT91SAM9M10G45EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=m
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_FW=m
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+# CONFIG_CAN_BCM is not set
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_PMECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_HT is not set
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV2640=y
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+CONFIG_VIDEO_ATMEL_ISI=y
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9m10g45ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9m10g45ek/defconfig
new file mode 100644
index 0000000000..9aeabf52f7
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9m10g45ek/defconfig
@@ -0,0 +1,2226 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:19:56 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_HAVE_AT91_USART3=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+CONFIG_ARCH_AT91SAM9G45=y
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G45 Board Type
+#
+CONFIG_MACH_AT91SAM9M10G45EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=m
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_FW=m
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+# CONFIG_CAN_BCM is not set
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_PMECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_HT is not set
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV2640=y
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+CONFIG_VIDEO_ATMEL_ISI=y
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9rlek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9rlek/defconfig
new file mode 100644
index 0000000000..b96c97d1dd
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9rlek/defconfig
@@ -0,0 +1,1354 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:13:07 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_HAVE_AT91_USART3=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+CONFIG_ARCH_AT91SAM9RL=y
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9RL Board Type
+#
+CONFIG_MACH_AT91SAM9RLEK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_GPIO_PCA953X is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=24576
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes/linux/linux-2.6.39.2/at91sam9x5ek/defconfig b/recipes/linux/linux-2.6.39.2/at91sam9x5ek/defconfig
new file mode 100644
index 0000000000..c18ac44cb0
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/at91sam9x5ek/defconfig
@@ -0,0 +1,2228 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39.2 Kernel Configuration
+# Sun Oct 30 13:13:25 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+CONFIG_ARCH_AT91SAM9X5=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9x5 Series Board Type
+#
+CONFIG_MACH_AT91SAM9X5EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9x5ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=m
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_FW=m
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+# CONFIG_CAN_BCM is not set
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_AT91=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_PMECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCB_CLKSRC_32BIT=y
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_HAVE_NET_MACB=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
+CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+# CONFIG_WL12XX_HT is not set
+# CONFIG_WL12XX_SPI is not set
+CONFIG_WL12XX_SDIO=m
+# CONFIG_WL12XX_SDIO_TEST is not set
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_DMA=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_AT91SAM9X5=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV2640=y
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+CONFIG_VIDEO_ATMEL_ISI=y
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+CONFIG_FB_ATMEL_HLCD=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes/linux/linux-2.6.39.2/openmoko.patch b/recipes/linux/linux-2.6.39.2/openmoko.patch
new file mode 100644
index 0000000000..5c4af4f0e7
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/openmoko.patch
@@ -0,0 +1,46285 @@
+All patches from openmoko repository
+
+http://git.openmoko.org/?p=kernel.git;a=commit;h=164905f9f5843aa94b04eef724238c77dc47af0f
+
+diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
+index 2242ce2..7ade2b8 100644
+--- a/arch/arm/include/asm/fiq.h
++++ b/arch/arm/include/asm/fiq.h
+@@ -29,8 +29,9 @@ struct fiq_handler {
+ extern int claim_fiq(struct fiq_handler *f);
+ extern void release_fiq(struct fiq_handler *f);
+ extern void set_fiq_handler(void *start, unsigned int length);
+-extern void set_fiq_regs(struct pt_regs *regs);
+-extern void get_fiq_regs(struct pt_regs *regs);
++extern void set_fiq_c_handler(void (*handler)(void));
++extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
++extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
+ extern void enable_fiq(int fiq);
+ extern void disable_fiq(int fiq);
+ 
+diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
+index e72dc34..0dd0fc0 100644
+--- a/arch/arm/kernel/fiq.c
++++ b/arch/arm/kernel/fiq.c
+@@ -8,6 +8,8 @@
+  *
+  *  FIQ support re-written by Russell King to be more generic
+  *
++ *  FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
++ *
+  * We now properly support a method by which the FIQ handlers can
+  * be stacked onto the vector.  We still do not support sharing
+  * the FIQ vector itself.
+@@ -130,6 +132,83 @@ void __naked get_fiq_regs(struct pt_regs *regs)
+ 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
+ }
+ 
++/* -------- FIQ handler in C ---------
++ *
++ * Major Caveats for using this
++ *  ---------------------------
++ *  *
++ *  * 1) it CANNOT touch any vmalloc()'d memory, only memory
++ *    that was kmalloc()'d.  Static allocations in the monolithic kernel
++ *    are kmalloc()'d so they are okay.  You can touch memory-mapped IO, but
++ *    the pointer for it has to have been stored in kmalloc'd memory.  The
++ *    reason for this is simple: every now and then Linux turns off interrupts
++ *    and reorders the paging tables.  If a FIQ happens during this time, the
++ *    virtual memory space can be partly or entirely disordered or missing.
++ *
++ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
++ *    ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module.  But the way
++ *    it is set up, you can all to enable and disable it from your module
++ *    and intercommunicate with it through struct fiq_ipc
++ *    fiq_ipc which you can define in
++ *    asm/archfiq_ipc_type.h.  The reason is the same as above, a
++ *    FIQ could happen while even the ISR is not present in virtual memory
++ *    space due to pagetables being changed at the time.
++ *
++ * 3) You can't call any Linux API code except simple macros
++ *    - understand that FIQ can come in at any time, no matter what
++ *      state of undress the kernel may privately be in, thinking it
++ *      locked the door by turning off interrupts... FIQ is an
++ *      unstoppable monster force (which is its value)
++ *    - they are not vmalloc()'d memory safe
++ *    - they might do crazy stuff like sleep: FIQ pisses fire and
++ *      is not interested in 'sleep' that the weak seem to need
++ *    - calling APIs from FIQ can re-enter un-renterable things
++ *    - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
++ *
++ * If you follow these rules, it is fantastic, an extremely powerful, solid,
++ * genuine hard realtime feature.
++ */
++
++static void (*current_fiq_c_isr)(void);
++#define FIQ_C_ISR_STACK_SIZE 	256
++
++static void __attribute__((naked)) __jump_to_isr(void)
++{
++	asm __volatile__ ("mov pc, r8");
++}
++
++
++static void __attribute__((naked)) __actual_isr(void)
++{
++	asm __volatile__ (
++		"stmdb	sp!, {r0-r12, lr};"
++		"mov     fp, sp;"
++	);
++
++	current_fiq_c_isr();
++
++	asm __volatile__ (
++		"ldmia	sp!, {r0-r12, lr};"
++		"subs	pc, lr, #4;"
++	);
++}
++
++void set_fiq_c_handler(void (*isr)(void))
++{
++	struct pt_regs regs;
++
++	memset(&regs, 0, sizeof(regs));
++	regs.ARM_r8 = (unsigned long) __actual_isr;
++	regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
++
++	set_fiq_handler(__jump_to_isr, 4);
++
++	current_fiq_c_isr = isr;
++
++	set_fiq_regs(&regs);
++}
++/* -------- FIQ handler in C ---------*/
++
+ int claim_fiq(struct fiq_handler *f)
+ {
+ 	int ret = 0;
+diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
+index f7f6b07..f9ddfa9 100644
+--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
++++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
+@@ -16,26 +16,20 @@
+ #define gpio_cansleep	__gpio_cansleep
+ #define gpio_to_irq	__gpio_to_irq
+ 
+-/* some boards require extra gpio capacity to support external
+- * devices that need GPIO.
+- */
++#include <mach/gpio-fns.h>
++#include <mach/gpio-nrs.h>
+ 
+-#ifdef CONFIG_CPU_S3C244X
+-#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+-#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
++#if defined(CPU_S3C2416) || defined(CPU_S3C2443)
++#define S3C_GPIO_END	S3C2410_GPM(S3C2410_GPIO_M_NR)
++#elif defined(CONFIG_CPU_S3C244X)
++#define S3C_GPIO_END	S3C2410_GPJ(S3C2410_GPIO_J_NR)
+ #else
+-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
++#define S3C_GPIO_END	S3C2410_GPH(S3C2410_GPIO_H_NR)
+ #endif
+ 
+-#include <asm-generic/gpio.h>
+-#include <mach/gpio-nrs.h>
+-#include <mach/gpio-fns.h>
++/* some boards require extra gpio capacity to support external
++ * devices that need GPIO.
++ */
++#define ARCH_NR_GPIOS (S3C_GPIO_END + CONFIG_S3C24XX_GPIO_EXTRA)
+ 
+-#ifdef CONFIG_CPU_S3C244X
+-#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
+-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+-#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
+-#else
+-#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
+-#endif
++#include <asm-generic/gpio.h>
+diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
+index 50825a3..5122b3e 100644
+--- a/arch/arm/mach-s3c2440/Kconfig
++++ b/arch/arm/mach-s3c2440/Kconfig
+@@ -93,13 +93,16 @@ config MACH_ANUBIS
+ config MACH_NEO1973_GTA02
+ 	bool "Openmoko GTA02 / Freerunner phone"
+ 	select CPU_S3C2442
++	select S3C24XX_GPIO_EXTRA64
+ 	select MFD_PCF50633
+-	select PCF50633_GPIO
++	select GPIO_PCF50633
+ 	select I2C
+ 	select POWER_SUPPLY
+ 	select MACH_NEO1973
+ 	select S3C2410_PWM
+ 	select S3C_DEV_USB_HOST
++	select SPARSE_IRQ
++	select FIQ
+ 	help
+ 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+ 
+diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
+index d5440fa..035d116 100644
+--- a/arch/arm/mach-s3c2440/Makefile
++++ b/arch/arm/mach-s3c2440/Makefile
+@@ -33,8 +33,14 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
+ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+ obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
+ obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+ obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
++	gta02-pm-bt.o \
++	gta02-pm-gps.o \
++	gta02-pm-gsm.o \
++	gta02-pm-wlan.o \
++	gta02-fiq.o \
++	gta02-hdq.o \
+ 
+ # extra machine support
+ 
+diff --git a/arch/arm/mach-s3c2440/gta02-fiq.c b/arch/arm/mach-s3c2440/gta02-fiq.c
+new file mode 100644
+index 0000000..6a9061d
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-fiq.c
+@@ -0,0 +1,133 @@
++#include <linux/kernel.h>
++
++#include <asm/fiq.h>
++#include <mach/regs-irq.h>
++#include <plat/regs-timer.h>
++#include <mach/irqs.h>
++#include <linux/io.h>
++#include <linux/pwm.h>
++#include <linux/err.h>
++#include <mach/gta02-hdq.h>
++
++/*
++ * GTA02 FIQ related
++ *
++ * Calls into vibrator and hdq and based on the return values
++ * determines if we the FIQ source be kept alive
++ */
++
++#define DIVISOR_FROM_US(x) ((x) << 3)
++
++#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
++extern int hdq_fiq_handler(void);
++
++/* Global data related to our fiq source */
++static uint32_t gta02_fiq_ack_mask;
++static const int gta02_gta02_fiq_timer_id = 2;
++
++struct pwm_device *gta02_fiq_timer;
++
++void gta02_fiq_handler(void)
++{
++	unsigned long intmask;
++	int keep_running = 0;
++	/* disable further timer interrupts if nobody has any work
++	 * or adjust rate according to who still has work
++	 *
++	 * CAUTION: it means forground code must disable FIQ around
++	 * its own non-atomic S3C2410_INTMSK changes... not common
++	 * thankfully and taken care of by the fiq-basis patch
++	 */
++
++	keep_running = hdq_fiq_handler();
++	if (!keep_running) {
++		/* Disable irq */
++		intmask = __raw_readl(S3C2410_INTMSK);
++		intmask |= (gta02_fiq_ack_mask);
++		__raw_writel(intmask, S3C2410_INTMSK);
++	}
++
++	__raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
++}
++
++void gta02_fiq_kick(void)
++{
++	unsigned long flags;
++	unsigned long intmask;
++	/* we have to take care about FIQ because this modification is
++	 * non-atomic, FIQ could come in after the read and before the
++	 * writeback and its changes to the register would be lost
++	 * (platform INTMSK mod code is taken care of already)
++	 */
++	local_save_flags(flags);
++	local_fiq_disable();
++
++	/* allow FIQs to resume */
++	intmask = __raw_readl(S3C2410_INTMSK);
++	intmask &= ~(gta02_fiq_ack_mask);
++	__raw_writel(intmask, S3C2410_INTMSK);
++
++	local_irq_restore(flags);
++
++}
++
++int gta02_fiq_enable(void)
++{
++	int ret = 0;
++
++	local_fiq_disable();
++
++	gta02_fiq_timer = pwm_request(gta02_gta02_fiq_timer_id, "fiq timer");
++
++	if (IS_ERR(gta02_fiq_timer)) {
++		ret = PTR_ERR(gta02_fiq_timer);
++		printk(KERN_ERR "GTA02 FIQ: Could not request fiq timer: %d\n",
++			ret);
++		return ret;
++	}
++
++	gta02_fiq_ack_mask = 1 << (IRQ_TIMER0 + gta02_gta02_fiq_timer_id
++					- S3C2410_CPUIRQ_OFFSET);
++
++
++	ret = pwm_config(gta02_fiq_timer, HDQ_SAMPLE_PERIOD_US * 1000,
++					HDQ_SAMPLE_PERIOD_US * 1000);
++	if (ret) {
++		printk(KERN_ERR "GTA02 FIQ: Could not configure fiq timer: %d\n",
++			ret);
++		goto err;
++	}
++
++	set_fiq_c_handler(gta02_fiq_handler);
++
++	__raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
++
++	pwm_enable(gta02_fiq_timer);
++
++	local_fiq_enable();
++
++	return 0;
++
++err:
++	pwm_free(gta02_fiq_timer);
++
++	return ret;
++}
++
++void gta02_fiq_disable(void)
++{
++	local_fiq_disable();
++
++	if (!gta02_fiq_timer)
++		return;
++
++	__raw_writel(0, S3C2410_INTMOD);
++	set_fiq_c_handler(NULL);
++
++	pwm_disable(gta02_fiq_timer);
++
++	pwm_free(gta02_fiq_timer);
++
++	gta02_fiq_timer = NULL;
++}
++/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
+diff --git a/arch/arm/mach-s3c2440/gta02-hdq.c b/arch/arm/mach-s3c2440/gta02-hdq.c
+new file mode 100644
+index 0000000..a1dadc2
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-hdq.c
+@@ -0,0 +1,414 @@
++/*
++ * HDQ generic GPIO bitbang driver using FIQ
++ *
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <mach/gta02-hdq.h>
++
++#define HDQ_READ 0
++
++enum hdq_bitbang_states {
++	HDQB_IDLE = 0,
++	HDQB_TX_BREAK,
++	HDQB_TX_BREAK_RECOVERY,
++	HDQB_ADS_CALC,
++	HDQB_ADS_LOW,
++	HDQB_ADS_HIGH,
++	HDQB_WAIT_RX,
++	HDQB_DATA_RX_LOW,
++	HDQB_DATA_RX_HIGH,
++	HDQB_WAIT_TX,
++};
++
++static struct hdq_priv {
++	struct mutex lock; /* if you want to use hdq, you have to take lock */
++	u8 hdq_probed; /* nonzero after HDQ driver probed */
++	u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
++	u8 hdq_tx_data; /* data to tx for write action */
++	u8 hdq_rx_data; /* data received in read action */
++	u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
++	u8 hdq_transaction_ctr; /* incremented after each transfer */
++	u8 hdq_error; /* 0 = no error */
++	u8 hdq_ctr;
++	u8 hdq_ctr2;
++	u8 hdq_bit;
++	u8 hdq_shifter;
++	u8 hdq_tx_data_done;
++	enum hdq_bitbang_states hdq_state;
++	int reported_error;
++
++	struct hdq_platform_data *pdata;
++} hdq_priv;
++
++
++static void hdq_bad(void)
++{
++	if (!hdq_priv.reported_error)
++		printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
++	hdq_priv.reported_error = 1;
++}
++
++static void hdq_good(void)
++{
++	if (hdq_priv.reported_error)
++		printk(KERN_INFO "HDQ responds again\n");
++	hdq_priv.reported_error = 0;
++}
++
++int hdq_fiq_handler(void)
++{
++	if (!hdq_priv.hdq_probed)
++		return 0;
++
++	switch (hdq_priv.hdq_state) {
++	case HDQB_IDLE:
++		if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
++			break;
++		hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
++		hdq_priv.pdata->gpio_set(0);
++		hdq_priv.pdata->gpio_dir_out();
++		hdq_priv.hdq_tx_data_done = 0;
++		hdq_priv.hdq_state = HDQB_TX_BREAK;
++		break;
++
++	case HDQB_TX_BREAK: /* issue low for > 190us */
++		if (--hdq_priv.hdq_ctr == 0) {
++			hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
++			hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
++			hdq_priv.pdata->gpio_set(1);
++		}
++		break;
++
++	case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
++		if (--hdq_priv.hdq_ctr)
++			break;
++		hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
++		hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
++		hdq_priv.hdq_tx_data_done = 0; /* doing ads */
++		/* fallthru on last one */
++	case HDQB_ADS_CALC:
++		if (hdq_priv.hdq_shifter & 1)
++			hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
++		else
++			hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
++		/* carefully precompute the other phase length */
++		hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr *
++				HDQ_SAMPLE_PERIOD_US)) / HDQ_SAMPLE_PERIOD_US;
++		hdq_priv.hdq_state = HDQB_ADS_LOW;
++		hdq_priv.hdq_shifter >>= 1;
++		hdq_priv.hdq_bit--;
++		hdq_priv.pdata->gpio_set(0);
++		break;
++
++	case HDQB_ADS_LOW:
++		if (--hdq_priv.hdq_ctr)
++			break;
++		hdq_priv.pdata->gpio_set(1);
++		hdq_priv.hdq_state = HDQB_ADS_HIGH;
++		break;
++
++	case HDQB_ADS_HIGH:
++		if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
++			break;
++		if (hdq_priv.hdq_bit) { /* more bits to do */
++			hdq_priv.hdq_state = HDQB_ADS_CALC;
++			break;
++		}
++		/* no more bits, wait until hdq_priv.hdq_ctr2 exhausted */
++		if (hdq_priv.hdq_ctr2)
++			break;
++		/* ok no more bits and very last state */
++		hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
++		/* FIXME 0 = read */
++		if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
++			 /* set delay before payload */
++			hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
++			/* already high, no need to write */
++			hdq_priv.hdq_state = HDQB_WAIT_TX;
++			break;
++		}
++		/* read the next byte */
++		hdq_priv.hdq_bit = 8; /* 8 bits of data */
++		hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
++		hdq_priv.hdq_state = HDQB_WAIT_RX;
++		hdq_priv.pdata->gpio_dir_in();
++		break;
++
++	case HDQB_WAIT_TX: /* issue low for > 40us */
++		if (--hdq_priv.hdq_ctr)
++			break;
++		if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
++			hdq_priv.hdq_tx_data_done++;
++			hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
++			hdq_priv.hdq_bit = 8; /* 8 bits of data */
++			hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
++			break;
++		}
++		hdq_priv.hdq_error = 0;
++		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++		hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
++		/* idle in input mode, it's pulled up by 10K */
++		hdq_priv.pdata->gpio_dir_in();
++		break;
++
++	case HDQB_WAIT_RX: /* wait for battery to talk to us */
++		if (hdq_priv.pdata->gpio_get() == 0) {
++			/* it talks to us! */
++			hdq_priv.hdq_ctr2 = 1;
++			hdq_priv.hdq_bit = 8; /* 8 bits of data */
++			/* timeout */
++			hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
++			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
++			break;
++		}
++		if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
++			hdq_priv.hdq_error = 1;
++			hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++			hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++		}
++		break;
++
++	/*
++	 * HDQ basically works by measuring the low time of the bit cell
++	 * 32-50us --> '1', 80 - 145us --> '0'
++	 */
++
++	case HDQB_DATA_RX_LOW:
++		if (hdq_priv.pdata->gpio_get()) {
++			hdq_priv.hdq_rx_data >>= 1;
++			if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
++				hdq_priv.hdq_rx_data |= 0x80;
++
++			if (--hdq_priv.hdq_bit == 0) {
++				hdq_priv.hdq_error = 0;
++				hdq_priv.hdq_transaction_ctr =
++						hdq_priv.hdq_request_ctr;
++
++				hdq_priv.hdq_state = HDQB_IDLE;
++			} else
++				hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
++			/* timeout */
++			hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
++			hdq_priv.hdq_ctr2 = 1;
++			break;
++		}
++		hdq_priv.hdq_ctr2++;
++		if (--hdq_priv.hdq_ctr)
++			break;
++		 /* timed out, error */
++		hdq_priv.hdq_error = 2;
++		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++		break;
++
++	case HDQB_DATA_RX_HIGH:
++		if (!hdq_priv.pdata->gpio_get()) {
++			/* it talks to us! */
++			hdq_priv.hdq_ctr2 = 1;
++			/* timeout */
++			hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
++			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
++			break;
++		}
++		if (--hdq_priv.hdq_ctr)
++			break;
++		/* timed out, error */
++		hdq_priv.hdq_error = 3;
++		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++
++		/* we're in input mode already */
++		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++		break;
++	}
++
++	/* Are we interested in keeping the FIQ source alive ? */
++	if (hdq_priv.hdq_state != HDQB_IDLE)
++		return 1;
++	else
++		return 0;
++}
++
++static int fiq_busy(void)
++{
++	int request;
++	int transact;
++
++	request = (volatile u8)hdq_priv.hdq_request_ctr;
++	transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
++	return (request != transact);
++}
++
++int hdq_read(struct device *dev, unsigned int address)
++{
++	int count_sleeps = 5;
++	int ret = -ETIME;
++
++	if (!hdq_priv.hdq_probed)
++		return -EINVAL;
++
++	mutex_lock(&hdq_priv.lock);
++
++	hdq_priv.hdq_error = 0;
++	hdq_priv.hdq_ads = address | HDQ_READ;
++	hdq_priv.hdq_request_ctr++;
++	hdq_priv.pdata->kick_fiq();
++	/*
++	 * FIQ takes care of it while we block our calling process
++	 * But we're not spinning -- other processes run normally while
++	 * we wait for the result
++	 */
++	while (count_sleeps--) {
++		msleep(10); /* valid transaction always completes in < 10ms */
++
++		if (fiq_busy())
++			continue;
++
++		if (hdq_priv.hdq_error) {
++			hdq_bad();
++			goto done; /* didn't see a response in good time */
++		}
++		hdq_good();
++
++		ret = hdq_priv.hdq_rx_data;
++		goto done;
++	}
++
++done:
++	mutex_unlock(&hdq_priv.lock);
++	return ret;
++}
++EXPORT_SYMBOL_GPL(hdq_read);
++
++/* sysfs */
++
++static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
++			 char *buf)
++{
++	int n;
++	int v;
++	u8 u8a[128]; /* whole address space for HDQ */
++	char *end = buf;
++
++	if (!hdq_priv.hdq_probed)
++		return -EINVAL;
++
++	/* the dump does not take care about 16 bit regs, because at this
++	 * bus level we don't know about the chip details
++	 */
++	for (n = 0; n < sizeof(u8a); n++) {
++		v = hdq_read(NULL, n);
++		if (v < 0)
++			goto bail;
++		u8a[n] = v;
++	}
++
++	for (n = 0; n < sizeof(u8a); n += 16) {
++		hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
++		end += strlen(end);
++		*end++ = '\n';
++		*end = '\0';
++	}
++	return end - buf;
++
++bail:
++	return sprintf(buf, "ERROR %d\n", v);
++}
++
++
++static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
++
++#ifdef CONFIG_PM
++static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	/* after 18s of this, the battery monitor will also go to sleep */
++	hdq_priv.pdata->gpio_dir_in();
++	hdq_priv.pdata->disable_fiq();
++	return 0;
++}
++
++static int hdq_resume(struct platform_device *pdev)
++{
++	hdq_priv.pdata->gpio_set(1);
++	hdq_priv.pdata->gpio_dir_out();
++	hdq_priv.pdata->enable_fiq();
++	return 0;
++}
++#endif
++
++static int __devinit hdq_probe(struct platform_device *pdev)
++{
++	struct hdq_platform_data *pdata = pdev->dev.platform_data;
++	int ret;
++
++	if (!pdata)
++		return -ENXIO;
++
++	mutex_init(&hdq_priv.lock);
++
++	/* set our HDQ comms pin from the platform data */
++	hdq_priv.pdata = pdata;
++
++	hdq_priv.pdata->gpio_set(1);
++	hdq_priv.pdata->gpio_dir_out();
++
++	/* Initialize FIQ */
++	if (hdq_priv.pdata->enable_fiq() < 0) {
++		dev_err(&pdev->dev, "Could not enable FIQ source\n");
++		return -EINVAL;
++	}
++
++	ret = device_create_file(&pdev->dev, &dev_attr_dump);
++	if (ret)
++		return ret;
++
++	hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
++
++	hdq_priv.pdata = pdata;
++
++	return 0;
++}
++
++static int __devexit hdq_remove(struct platform_device *pdev)
++{
++	device_remove_file(&pdev->dev, &dev_attr_dump);
++	return 0;
++}
++
++static struct platform_driver hdq_driver = {
++	.probe		= hdq_probe,
++	.remove		= hdq_remove,
++#ifdef CONFIG_PM
++	.suspend	= hdq_suspend,
++	.resume		= hdq_resume,
++#endif
++	.driver		= {
++		.name		= "hdq",
++	},
++};
++
++static int __init hdq_init(void)
++{
++	return platform_driver_register(&hdq_driver);
++}
++module_init(hdq_init);
++
++static void __exit hdq_exit(void)
++{
++	platform_driver_unregister(&hdq_driver);
++}
++module_exit(hdq_exit);
++
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("HDQ driver");
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-bt.c b/arch/arm/mach-s3c2440/gta02-pm-bt.c
+new file mode 100644
+index 0000000..28aaa3c
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-pm-bt.c
+@@ -0,0 +1,264 @@
++/*
++ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rfkill.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++
++#include <linux/err.h>
++
++#include <mach/gpio-fns.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#include <mach/gta02.h>
++
++#include <linux/regulator/consumer.h>
++
++#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
++
++struct gta02_pm_bt_data {
++	struct regulator *regulator;
++	struct rfkill *rfkill;
++	int pre_resume_state;
++};
++
++static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
++			char *buf)
++{
++	int ret = 0;
++	if (!strcmp(attr->attr.name, "power_on")) {
++		if (gpio_get_value(GTA02_GPIO_BT_EN))
++			ret = 1;
++	} else if (!strcmp(attr->attr.name, "reset")) {
++		if (gpio_get_value(GTA02_GPIO_BT_EN) == 0)
++			ret = 1;
++	}
++
++	if (!ret)
++		return strlcpy(buf, "0\n", 3);
++	else
++		return strlcpy(buf, "1\n", 3);
++}
++
++static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
++{
++	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++	dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
++
++	bt_data = dev_get_drvdata(dev);
++
++	gpio_set_value(GTA02_GPIO_BT_EN, !on);
++
++	if (on) {
++		if (!regulator_is_enabled(bt_data->regulator))
++			regulator_enable(bt_data->regulator);
++	} else {
++		if (regulator_is_enabled(bt_data->regulator))
++			regulator_disable(bt_data->regulator);
++	}
++
++	gpio_set_value(GTA02_GPIO_BT_EN, on);
++}
++
++
++static int bt_rfkill_set_block(void *data, bool blocked)
++{
++	struct device *dev = data;
++
++	__gta02_pm_bt_toggle_radio(dev, !blocked);
++
++	return 0;
++}
++
++static const struct rfkill_ops gta02_bt_rfkill_ops = {
++	.set_block = bt_rfkill_set_block,
++};
++
++
++static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
++			const char *buf, size_t count)
++{
++	int ret;
++	unsigned long on;
++	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++	ret = strict_strtoul(buf, 10, &on);
++	if (ret)
++		return ret;
++
++	if (!strcmp(attr->attr.name, "power_on")) {
++		rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
++
++		__gta02_pm_bt_toggle_radio(dev, on);
++	} else if (!strcmp(attr->attr.name, "reset")) {
++		/* reset is low-active, so we need to invert */
++		gpio_set_value(GTA02_GPIO_BT_EN, on ? 0 : 1);
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
++static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
++
++#ifdef CONFIG_PM
++static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++
++	dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
++
++	bt_data->pre_resume_state = gpio_get_value(GTA02_GPIO_BT_EN);
++	__gta02_pm_bt_toggle_radio(&pdev->dev, 0);
++
++	return 0;
++}
++
++static int gta02_bt_resume(struct platform_device *pdev)
++{
++	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++	dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
++
++	__gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
++	return 0;
++}
++#else
++#define gta02_bt_suspend	NULL
++#define gta02_bt_resume		NULL
++#endif
++
++static struct attribute *gta02_bt_sysfs_entries[] = {
++	&dev_attr_power_on.attr,
++	&dev_attr_reset.attr,
++	NULL
++};
++
++static struct attribute_group gta02_bt_attr_group = {
++	.name	= NULL,
++	.attrs	= gta02_bt_sysfs_entries,
++};
++
++static int __devinit gta02_bt_probe(struct platform_device *pdev)
++{
++	struct rfkill *rfkill;
++	struct regulator *regulator;
++	struct gta02_pm_bt_data *bt_data;
++	int ret;
++
++	dev_info(&pdev->dev, DRVMSG ": starting\n");
++
++	bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
++	dev_set_drvdata(&pdev->dev, bt_data);
++
++	regulator = regulator_get(&pdev->dev, "BT_3V2");
++	if (IS_ERR(regulator))
++		return -ENODEV;
++
++	bt_data->regulator = regulator;
++
++	/* this tests the true physical state of the regulator... */
++	if (regulator_is_enabled(regulator)) {
++		/*
++		 * but these only operate on the logical state of the
++		 * regulator... so we need to logicaly "adopt" it on
++		 * to turn it off
++		 */
++		regulator_enable(regulator);
++		regulator_disable(regulator);
++	}
++
++	/* we pull reset to low to make sure that the chip doesn't
++	 * drain power through the reset line */
++	gpio_request(GTA02_GPIO_BT_EN, "Bluetooth enable");
++	gpio_direction_output(GTA02_GPIO_BT_EN, 0);
++
++	rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
++				&gta02_bt_rfkill_ops, &pdev->dev);
++
++	if (!rfkill) {
++		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
++		return -ENOMEM;
++	}
++
++	rfkill_init_sw_state(rfkill, 0);
++
++	ret = rfkill_register(rfkill);
++	if (ret) {
++		rfkill_destroy(rfkill);
++		dev_err(&pdev->dev, "Failed to register rfkill\n");
++		return ret;
++	}
++
++	bt_data->rfkill = rfkill;
++
++	return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
++}
++
++static int __devexit gta02_bt_remove(struct platform_device *pdev)
++{
++	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++	struct regulator *regulator;
++
++	sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
++
++	if (bt_data->rfkill)
++		rfkill_destroy(bt_data->rfkill);
++
++	if (!bt_data || !bt_data->regulator)
++		return 0;
++
++	regulator = bt_data->regulator;
++
++	/* Make sure regulator is disabled before calling regulator_put */
++	if (regulator_is_enabled(regulator))
++		regulator_disable(regulator);
++
++	regulator_put(regulator);
++
++	kfree(bt_data);
++
++	return 0;
++}
++
++static struct platform_driver gta02_bt_driver = {
++	.probe		= gta02_bt_probe,
++	.remove		= __devexit_p(gta02_bt_remove),
++	.suspend	= gta02_bt_suspend,
++	.resume		= gta02_bt_resume,
++	.driver		= {
++		.name		= "gta02-pm-bt",
++	},
++};
++
++static int __init gta02_bt_init(void)
++{
++	return platform_driver_register(&gta02_bt_driver);
++}
++module_init(gta02_bt_init);
++
++static void __exit gta02_bt_exit(void)
++{
++	platform_driver_unregister(&gta02_bt_driver);
++}
++module_exit(gta02_bt_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION(DRVMSG);
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-gps.c b/arch/arm/mach-s3c2440/gta02-pm-gps.c
+new file mode 100644
+index 0000000..4ca3ac6
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-pm-gps.c
+@@ -0,0 +1,229 @@
++/*
++ * GPS Power Management code for the Openmoko Freerunner GSM Phone
++ *
++ * (C) 2007-2009 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <mach/gpio-fns.h>
++#include <linux/gpio.h>
++
++#include <mach/gta02.h>
++
++#include <linux/regulator/consumer.h>
++#include <linux/err.h>
++
++struct gta02_pm_gps_data {
++#ifdef CONFIG_PM
++	int keep_on_in_suspend;
++#endif
++	int power_was_on;
++	struct regulator *regulator;
++};
++
++static struct gta02_pm_gps_data gta02_gps;
++
++int gta02_pm_gps_is_on(void)
++{
++	return gta02_gps.power_was_on;
++}
++EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
++
++/* This is the POWERON pin */
++static void gps_pwron_set(int on)
++{
++	if (on) {
++		/* return UART pins to being UART pins */
++		s3c_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1);
++		/* remove pulldown now it won't be floating any more */
++		s3c_gpio_setpull(S3C2410_GPH(5), S3C_GPIO_PULL_NONE);
++
++		if (!gta02_gps.power_was_on)
++			regulator_enable(gta02_gps.regulator);
++	} else {
++		/*
++		 * take care not to power unpowered GPS from UART TX
++		 * return them to GPIO and force low
++		 */
++		s3c_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
++		gpio_set_value(S3C2410_GPH(4), 0);
++		/* don't let RX from unpowered GPS float */
++		s3c_gpio_setpull(S3C2410_GPH(5), S3C_GPIO_PULL_DOWN);
++		if (gta02_gps.power_was_on)
++			regulator_disable(gta02_gps.regulator);
++	}
++}
++
++static int gps_pwron_get(void)
++{
++	return regulator_is_enabled(gta02_gps.regulator);
++}
++
++#ifdef CONFIG_PM
++/* This is the flag for keeping gps ON during suspend */
++static void gps_keep_on_in_suspend_set(int on)
++{
++	gta02_gps.keep_on_in_suspend = on;
++}
++
++static int gps_keep_on_in_suspend_get(void)
++{
++	return gta02_gps.keep_on_in_suspend;
++}
++#endif
++
++static ssize_t power_gps_read(struct device *dev,
++			      struct device_attribute *attr, char *buf)
++{
++	int ret = 0;
++
++	if (!strcmp(attr->attr.name, "power_on"))
++		ret = gps_pwron_get();
++#ifdef CONFIG_PM
++	else if (!strcmp(attr->attr.name, "keep_on_in_suspend"))
++		ret = gps_keep_on_in_suspend_get();
++#endif
++	if (ret)
++		return strlcpy(buf, "1\n", 3);
++	else
++		return strlcpy(buf, "0\n", 3);
++}
++
++static ssize_t power_gps_write(struct device *dev,
++			       struct device_attribute *attr, const char *buf,
++			       size_t count)
++{
++	int ret;
++	unsigned long on;
++
++	ret = strict_strtoul(buf, 10, &on);
++	if (ret)
++		return ret;
++
++	if (!strcmp(attr->attr.name, "power_on")) {
++		gps_pwron_set(on);
++		gta02_gps.power_was_on = !!on;
++#ifdef CONFIG_PM
++	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
++		gps_keep_on_in_suspend_set(on);
++#endif
++	}
++	return count;
++}
++
++#ifdef CONFIG_PM
++static int gta02_pm_gps_suspend(struct device *dev)
++{
++	if (!gta02_gps.keep_on_in_suspend ||
++		!gta02_gps.power_was_on)
++		gps_pwron_set(0);
++	else
++		dev_warn(dev, "GTA02: keeping gps ON "
++			 "during suspend\n");
++	return 0;
++}
++
++static int gta02_pm_gps_resume(struct device *dev)
++{
++	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
++		gps_pwron_set(1);
++
++	return 0;
++}
++
++static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
++
++static const struct dev_pm_ops gta02_gps_pm_ops = {
++	.suspend	= gta02_pm_gps_suspend,
++	.resume		= gta02_pm_gps_resume,
++};
++
++#define GTA02_GPS_PM_OPS (&gta02_gps_pm_ops)
++
++#else
++#define GTA02_GPS_PM_OPS NULL
++#endif
++
++static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
++
++static struct attribute *gta02_gps_sysfs_entries[] = {
++	&dev_attr_power_on.attr,
++#ifdef CONFIG_PM
++	&dev_attr_keep_on_in_suspend.attr,
++#endif
++	NULL
++};
++
++static struct attribute_group gta02_gps_attr_group = {
++	.name	= NULL,
++	.attrs	= gta02_gps_sysfs_entries,
++};
++
++static int __devinit gta02_pm_gps_probe(struct platform_device *pdev)
++{
++	gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
++	if (IS_ERR(gta02_gps.regulator)) {
++		dev_err(&pdev->dev, "probe failed %ld\n",
++			PTR_ERR(gta02_gps.regulator));
++
++		return PTR_ERR(gta02_gps.regulator);
++	}
++
++	dev_info(&pdev->dev, "starting\n");
++
++
++	/*
++	 * take care not to power unpowered GPS from UART TX
++	 * return them to GPIO and force low
++	 */
++	gpio_request(S3C2410_GPH(4), "gps tx");
++	gpio_direction_output(S3C2410_GPH(4), 0);
++	/* don't let RX from unpowered GPS float */
++	s3c_gpio_setpull(S3C2410_GPH(5), S3C_GPIO_PULL_UP);
++
++	return sysfs_create_group(&pdev->dev.kobj,
++				  &gta02_gps_attr_group);
++}
++
++static int __devexit gta02_pm_gps_remove(struct platform_device *pdev)
++{
++	regulator_put(gta02_gps.regulator);
++	sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
++	return 0;
++}
++
++static struct platform_driver gta02_pm_gps_driver = {
++	.probe		= gta02_pm_gps_probe,
++	.remove		= __devexit_p(gta02_pm_gps_remove),
++	.driver		= {
++		.name		= "gta02-pm-gps",
++		.pm			= GTA02_GPS_PM_OPS,
++	},
++};
++
++static int __init gta02_pm_gps_init(void)
++{
++	return platform_driver_register(&gta02_pm_gps_driver);
++}
++module_init(gta02_pm_gps_init);
++
++static void __exit gta02_pm_gps_exit(void)
++{
++	platform_driver_unregister(&gta02_pm_gps_driver);
++}
++module_exit(gta02_pm_gps_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-gsm.c b/arch/arm/mach-s3c2440/gta02-pm-gsm.c
+new file mode 100644
+index 0000000..a2b4e91
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-pm-gsm.c
+@@ -0,0 +1,368 @@
++/*
++ * GSM Management code for the Openmoko Freerunner GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/console.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/regulator/consumer.h>
++
++#include <linux/gpio.h>
++#include <mach/gpio.h>
++#include <asm/mach-types.h>
++
++#include <mach/hardware.h>
++
++#include <mach/gta02.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++
++static int gta02_gsm_interrupts;
++
++extern void s3c24xx_serial_console_set_silence(int);
++
++struct gta02pm_priv {
++	int gpio_ndl_gsm;
++	struct console *con;
++	struct regulator *regulator;
++};
++
++static struct gta02pm_priv gta02_gsm;
++
++static struct console *find_s3c24xx_console(void)
++{
++	struct console *con;
++
++	console_lock();
++
++	for (con = console_drivers; con; con = con->next) {
++		if (!strcmp(con->name, "ttySAC"))
++			break;
++	}
++
++	console_unlock();
++
++	return con;
++}
++
++static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
++			char *buf)
++{
++	if (!strcmp(attr->attr.name, "power_on")) {
++		if (regulator_is_enabled(gta02_gsm.regulator))
++			goto out_1;
++	} else if (!strcmp(attr->attr.name, "download")) {
++		if (!gpio_get_value(GTA02_GPIO_nDL_GSM))
++			goto out_1;
++	} else if (!strcmp(attr->attr.name, "flowcontrolled")) {
++		if (s3c_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT)
++			goto out_1;
++	}
++
++	return strlcpy(buf, "0\n", 3);
++out_1:
++	return strlcpy(buf, "1\n", 3);
++}
++
++static void gsm_on_off(struct device *dev, bool on)
++{
++	if (on == regulator_is_enabled(gta02_gsm.regulator))
++		return;
++
++	if (!on) {
++		s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT);
++		s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT);
++
++		regulator_disable(gta02_gsm.regulator);
++
++		if (gta02_gsm.con) {
++			s3c24xx_serial_console_set_silence(0);
++			console_start(gta02_gsm.con);
++
++			dev_dbg(dev, "powered down gta02 GSM, enabling "
++					"serial console\n");
++		}
++
++		return;
++	}
++
++	if (gta02_gsm.con) {
++		dev_dbg(dev, "powering up GSM, thus "
++				"disconnecting serial console\n");
++
++		console_stop(gta02_gsm.con);
++		s3c24xx_serial_console_set_silence(1);
++	}
++
++	/* allow UART to talk to GSM side now we will power it */
++	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
++	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
++
++	regulator_enable(gta02_gsm.regulator);
++
++	msleep(100);
++
++	gpio_set_value(GTA02_GPIO_MODEM_ON, 1);
++	msleep(500);
++	gpio_set_value(GTA02_GPIO_MODEM_ON, 0);
++
++	/*
++	 * workaround for calypso firmware moko10 and earlier,
++	 * without this it will leave IRQ line high after
++	 * booting
++	 */
++	s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
++	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
++	msleep(1000);
++	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
++
++}
++
++static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++	int ret;
++	unsigned long on;
++
++	ret = strict_strtoul(buf, 10, &on);
++	if (ret)
++		return ret;
++
++	if (!strcmp(attr->attr.name, "power_on")) {
++		gsm_on_off(dev, on);
++
++		return count;
++	}
++
++	if (!strcmp(attr->attr.name, "download")) {
++		/*
++		 * the keyboard / buttons driver requests and enables
++		 * the JACK_INSERT IRQ.  We have to take care about
++		 * not enabling and disabling the IRQ when it was
++		 * already in that state or we get "unblanaced IRQ"
++		 * kernel warnings and stack dumps.  So we use the
++		 * copy of the ndl_gsm state to figure out if we should
++		 * enable or disable the jack interrupt
++		 */
++		if (on) {
++			if (gta02_gsm.gpio_ndl_gsm)
++				disable_irq(gpio_to_irq(
++						   GTA02_GPIO_JACK_INSERT));
++		} else {
++			if (!gta02_gsm.gpio_ndl_gsm)
++				enable_irq(gpio_to_irq(
++						   GTA02_GPIO_JACK_INSERT));
++		}
++
++		gta02_gsm.gpio_ndl_gsm = !on;
++		gpio_set_value(GTA02_GPIO_nDL_GSM, !on);
++
++		return count;
++	}
++
++	if (!strcmp(attr->attr.name, "flowcontrolled")) {
++		if (on) {
++			gta02_gsm_interrupts = 0;
++			gpio_set_value(S3C2410_GPH(1), 1);
++			s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
++		} else
++			s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
++
++#ifdef CONFIG_PM
++
++static int gta02_gsm_suspend(struct device *dev)
++{
++	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
++	 * don't need to do much here. */
++
++
++	/* If flowcontrol asserted, abort if GSM already interrupted */
++	if (s3c_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
++		if (gta02_gsm_interrupts)
++			goto busy;
++	}
++
++	/* disable DL GSM to prevent jack_insert becoming 'floating' */
++	gpio_set_value(GTA02_GPIO_nDL_GSM, 1);
++
++	if (device_may_wakeup(dev))
++		enable_irq_wake(GTA02_IRQ_MODEM);
++
++	return 0;
++
++busy:
++	return -EBUSY;
++}
++
++static int gta02_gsm_suspend_late(struct device *dev)
++{
++	/* Last chance: abort if GSM already interrupted */
++	if (s3c_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
++		if (gta02_gsm_interrupts)
++			return -EBUSY;
++	}
++	return 0;
++}
++
++static int gta02_gsm_resume(struct device *dev)
++{
++	if (device_may_wakeup(dev))
++		disable_irq_wake(GTA02_IRQ_MODEM);
++
++	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
++	 * don't need to do much here. */
++
++	/* Make sure that the kernel console on the serial port is still
++	 * disabled. FIXME: resume ordering race with serial driver! */
++	if (gta02_gsm.con && gpio_get_value(GTA02_GPIO_MODEM_ON))
++		console_stop(gta02_gsm.con);
++
++	gpio_set_value(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
++
++	return 0;
++}
++
++static const struct dev_pm_ops gta02_gsm_pm_ops = {
++	.suspend	= gta02_gsm_suspend,
++	.suspend_noirq	= gta02_gsm_suspend_late,
++	.resume		= gta02_gsm_resume,
++};
++
++#define GTA02_GSM_PM_OPS (&gta02_gsm_pm_ops)
++
++#else
++#define GTA02_GSM_PM_OPS NULL
++#endif /* CONFIG_PM */
++
++static struct attribute *gta02_gsm_sysfs_entries[] = {
++	&dev_attr_power_on.attr,
++	&dev_attr_reset.attr,
++	&dev_attr_download.attr,
++	&dev_attr_flowcontrolled.attr,
++	NULL
++};
++
++static struct attribute_group gta02_gsm_attr_group = {
++	.name	= NULL,
++	.attrs	= gta02_gsm_sysfs_entries,
++};
++
++static irqreturn_t gta02_gsm_irq(int irq, void *devid)
++{
++	gta02_gsm_interrupts++;
++	return IRQ_HANDLED;
++}
++
++static int __devinit gta02_gsm_probe(struct platform_device *pdev)
++{
++	int ret;
++
++	gta02_gsm.con = find_s3c24xx_console();
++	if (!gta02_gsm.con)
++		dev_warn(&pdev->dev,
++			 "cannot find S3C24xx console driver\n");
++
++	gta02_gsm.regulator = regulator_get_exclusive(&pdev->dev, "GSM");
++
++	if (IS_ERR(gta02_gsm.regulator)) {
++		ret = PTR_ERR(gta02_gsm.regulator);
++		dev_err(&pdev->dev, "Failed to get regulator: %d\n", ret);
++		return ret;
++	}
++
++	ret = request_irq(GTA02_IRQ_MODEM, gta02_gsm_irq,
++			IRQF_DISABLED | IRQF_TRIGGER_RISING, "modem", NULL);
++
++	if (ret) {
++		regulator_put(gta02_gsm.regulator);
++		dev_err(&pdev->dev, "Failed to get modem irq: %d\n", ret);
++		goto err_regulator_put;
++	}
++
++	ret = sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to create sysfs entries: %d\n",
++			ret);
++		goto err_free_irq;
++	}
++
++	device_init_wakeup(&pdev->dev, 1);
++
++	/* note that download initially disabled, and enforce that */
++	gta02_gsm.gpio_ndl_gsm = 1;
++	gpio_request(GTA02_GPIO_nDL_GSM, "GSM nDL");
++	gpio_direction_output(GTA02_GPIO_nDL_GSM, 1);
++	gpio_request(GTA02_GPIO_MODEM_ON, "GSM modem enable");
++	gpio_direction_output(GTA02_GPIO_MODEM_ON, 0);
++
++	/* GSM is to be initially off (at boot, or if this module inserted) */
++	gsm_on_off(&pdev->dev, 0);
++
++	return 0;
++err_free_irq:
++	free_irq(GTA02_IRQ_MODEM, NULL);
++err_regulator_put:
++	regulator_put(gta02_gsm.regulator);
++
++	return ret;
++}
++
++static int __devexit gta02_gsm_remove(struct platform_device *pdev)
++{
++	gsm_on_off(&pdev->dev, 0);
++
++	sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
++	free_irq(GTA02_IRQ_MODEM, NULL);
++	regulator_put(gta02_gsm.regulator);
++
++	return 0;
++}
++
++static struct platform_driver gta02_gsm_driver = {
++	.probe		= gta02_gsm_probe,
++	.remove		= __devexit_p(gta02_gsm_remove),
++	.driver		= {
++		.name	= "gta02-pm-gsm",
++		.pm	= GTA02_GSM_PM_OPS,
++	},
++};
++
++static int __init gta02_gsm_init(void)
++{
++	return platform_driver_register(&gta02_gsm_driver);
++}
++module_init(gta02_gsm_init);
++
++static void __exit gta02_gsm_exit(void)
++{
++	platform_driver_unregister(&gta02_gsm_driver);
++}
++module_exit(gta02_gsm_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-wlan.c b/arch/arm/mach-s3c2440/gta02-pm-wlan.c
+new file mode 100644
+index 0000000..1c8da2c
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-pm-wlan.c
+@@ -0,0 +1,198 @@
++/*
++ * GTA02 WLAN power management
++ *
++ * (C) 2008, 2009 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/mutex.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#include <mach/gta02.h>
++#include <mach/gta02-pm-wlan.h>
++#include <mach/regs-gpio.h>
++#include <mach/gpio-fns.h>
++#include <linux/gpio.h>
++
++#include <linux/delay.h>
++#include <linux/rfkill.h>
++
++
++/* ----- Module hardware reset ("power") ----------------------------------- */
++
++
++void gta02_wlan_reset()
++{
++	gpio_set_value(GTA02_GPIO_nWLAN_RESET, 0);
++	msleep(200); /* probably excessive but we don't have specs */
++	gpio_set_value(GTA02_GPIO_nWLAN_RESET, 1);
++}
++
++/* ----- rfkill ------------------------------------------------------------ */
++
++/*
++ * S3C MCI handles suspend/resume through device removal/insertion. In order to
++ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
++ * we therefore need to maintain rfkill state outside the driver.
++ *
++ * This platform driver is as good a place as any other.
++ */
++
++static int (*gta02_wlan_rfkill_cb)(void *user, int on);
++static void *gta02_wlan_rfkill_user;
++static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
++static int gta02_wlan_rfkill_on;
++
++/*
++ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
++ * driver is ready to process rfkill callbacks. To prevent the state from
++ * changing until the driver has completed its initialization, we grab and hold
++ * the rfkill lock.
++ *
++ * A call to gta02_wlan_query_rfkill_lock must be followed by either
++ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
++ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
++ */
++
++int gta02_wlan_query_rfkill_lock(void)
++{
++	mutex_lock(&gta02_wlan_rfkill_lock);
++	return gta02_wlan_rfkill_on;
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
++
++void gta02_wlan_query_rfkill_unlock(void)
++{
++	mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
++
++void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
++{
++	BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
++	BUG_ON(gta02_wlan_rfkill_cb);
++	gta02_wlan_rfkill_cb = cb;
++	gta02_wlan_rfkill_user = user;
++	mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
++
++void gta02_wlan_clear_rfkill_cb(void)
++{
++	mutex_lock(&gta02_wlan_rfkill_lock);
++	BUG_ON(!gta02_wlan_rfkill_cb);
++	gta02_wlan_rfkill_cb = NULL;
++	mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
++
++static int gta02_wlan_set_radio_block(void *data, bool blocked)
++{
++	struct device *dev = data;
++	int res = 0;
++
++	dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n",
++		blocked, gta02_wlan_rfkill_cb);
++	mutex_lock(&gta02_wlan_rfkill_lock);
++	if (gta02_wlan_rfkill_cb)
++		res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked);
++	if (!res)
++		gta02_wlan_rfkill_on = !blocked;
++	mutex_unlock(&gta02_wlan_rfkill_lock);
++	return res;
++}
++
++static const struct rfkill_ops gta02_wlan_rfkill_ops = {
++	.set_block = gta02_wlan_set_radio_block,
++};
++
++/* ----- Initialization/removal -------------------------------------------- */
++
++
++static int __devinit gta02_wlan_probe(struct platform_device *pdev)
++{
++	/* default-on for now */
++	const int default_state = 1;
++	struct rfkill *rfkill;
++	int ret;
++
++	dev_info(&pdev->dev, "starting\n");
++
++	gpio_request(GTA02_GPIO_nWLAN_RESET, "wlan reset");
++	gpio_direction_output(GTA02_GPIO_nWLAN_RESET, 0);
++	gta02_wlan_reset();
++
++	rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN,
++				&gta02_wlan_rfkill_ops, &pdev->dev);
++
++
++	if (!rfkill) {
++		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
++		return -ENOMEM;
++	}
++
++	rfkill_init_sw_state(rfkill, default_state);
++	/*
++	 * If the WLAN driver somehow managed to get activated before we're
++	 * ready, the driver is now in an unknown state, which isn't something
++	 * we're prepared to handle. This can't happen, so just fail hard.
++	 */
++	BUG_ON(gta02_wlan_rfkill_cb);
++	gta02_wlan_rfkill_on = default_state;
++
++	ret = rfkill_register(rfkill);
++	if (ret) {
++		rfkill_destroy(rfkill);
++		dev_err(&pdev->dev, "Failed to register rfkill\n");
++		return ret;
++	}
++
++	dev_set_drvdata(&pdev->dev, rfkill);
++
++	return 0;
++}
++
++static int __devexit gta02_wlan_remove(struct platform_device *pdev)
++{
++	struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
++
++	rfkill_destroy(rfkill);
++
++	return 0;
++}
++
++static struct platform_driver gta02_wlan_driver = {
++	.probe		= gta02_wlan_probe,
++	.remove		= __devexit_p(gta02_wlan_remove),
++	.driver		= {
++		.name		= "gta02-pm-wlan",
++	},
++};
++
++static int __init gta02_wlan_init(void)
++{
++	return platform_driver_register(&gta02_wlan_driver);
++}
++module_init(gta02_wlan_init);
++
++static void __exit gta02_wlan_exit(void)
++{
++	platform_driver_unregister(&gta02_wlan_driver);
++}
++module_exit(gta02_wlan_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
+diff --git a/arch/arm/mach-s3c2440/include/mach/gta02-fiq.h b/arch/arm/mach-s3c2440/include/mach/gta02-fiq.h
+new file mode 100644
+index 0000000..90de353
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/include/mach/gta02-fiq.h
+@@ -0,0 +1,9 @@
++#ifndef __GTA02_FIQ_H
++#define __GTA02_FIQ_H
++
++extern void gta02_fiq_handler(void);
++extern void gta02_fiq_kick(void);
++extern int gta02_fiq_enable(void);
++extern void gta02_fiq_disable(void);
++
++#endif
+diff --git a/arch/arm/mach-s3c2440/include/mach/gta02-hdq.h b/arch/arm/mach-s3c2440/include/mach/gta02-hdq.h
+new file mode 100644
+index 0000000..ba98f8f
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/include/mach/gta02-hdq.h
+@@ -0,0 +1,23 @@
++#ifndef __LINUX_HDQ_H__
++#define __LINUX_HDQ_H__
++
++#include <linux/device.h>
++
++#define HDQ_SAMPLE_PERIOD_US	10
++
++/* platform data */
++
++struct hdq_platform_data {
++	void (*gpio_dir_out)(void);
++	void (*gpio_dir_in)(void);
++	void (*gpio_set)(int);
++	int (*gpio_get)(void);
++
++	int (*enable_fiq)(void);
++	void (*disable_fiq)(void);
++	void (*kick_fiq)(void);
++};
++
++int hdq_read(struct device *dev, unsigned int address);
++
++#endif
+diff --git a/arch/arm/mach-s3c2440/include/mach/gta02-pm-gps.h b/arch/arm/mach-s3c2440/include/mach/gta02-pm-gps.h
+new file mode 100644
+index 0000000..f15180a
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/include/mach/gta02-pm-gps.h
+@@ -0,0 +1 @@
++extern int gta02_pm_gps_is_on(void);
+diff --git a/arch/arm/mach-s3c2440/include/mach/gta02-pm-wlan.h b/arch/arm/mach-s3c2440/include/mach/gta02-pm-wlan.h
+new file mode 100644
+index 0000000..0c96db4
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/include/mach/gta02-pm-wlan.h
+@@ -0,0 +1,10 @@
++#ifndef __MACH_GTA02_PM_WLAN_H
++#define __MACH_GTA02_PM_WLAN_H
++
++void gta02_wlan_reset(void);
++int gta02_wlan_query_rfkill_lock(void);
++void gta02_wlan_query_rfkill_unlock(void);
++void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
++void gta02_wlan_clear_rfkill_cb(void);
++
++#endif /* __MACH_GTA02_PM_WLAN_H */
+diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
+index 3a56a22..2e84b5a 100644
+--- a/arch/arm/mach-s3c2440/include/mach/gta02.h
++++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
+@@ -79,6 +79,11 @@
+ #define GTA02_PCB_ID2_0		S3C2410_GPD(3)
+ #define GTA02_PCB_ID2_1		S3C2410_GPD(4)
+ 
++#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
++#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + (x))
++#define GTA02_GPIO_PCF_BASE (GTA02_GPIO_GLAMO_BASE + 32)
++#define GTA02_GPIO_PCF(x) (GTA02_GPIO_PCF_BASE + (x))
++
+ int gta02_get_pcb_revision(void);
+ 
+ #endif /* _GTA02_H */
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index 7166620..aa31b8d 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -38,6 +38,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/serial_core.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
+ 
+ #include <linux/mmc/host.h>
+ 
+@@ -50,6 +51,7 @@
+ 
+ #include <linux/i2c.h>
+ #include <linux/regulator/machine.h>
++#include <linux/regulator/fixed.h>
+ 
+ #include <linux/mfd/pcf50633/core.h>
+ #include <linux/mfd/pcf50633/mbc.h>
+@@ -61,6 +63,9 @@
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+ 
++#include <linux/leds.h>
++#include <linux/leds_pwm.h>
++
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/mach/irq.h>
+@@ -92,6 +97,19 @@
+ #include <plat/ts.h>
+ 
+ 
++#include <mach/gta02-pm-gps.h>
++#include <mach/gta02-pm-wlan.h>
++
++#include <mach/gta02-fiq.h>
++
++#include <mach/gta02-hdq.h>
++#include <linux/power/bq27x00_battery.h>
++#include <linux/platform_battery.h>
++
++#include <linux/jbt6k74.h>
++#include <linux/glamofb.h>
++#include <linux/mfd/glamo.h>
++
+ static struct pcf50633 *gta02_pcf;
+ 
+ /*
+@@ -147,6 +165,183 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ 	},
+ };
+ 
++static struct platform_device gta02_pm_bt_dev = {
++	.name = "gta02-pm-bt",
++};
++
++static struct platform_device gta02_pm_gps_dev = {
++	.name = "gta02-pm-gps",
++};
++
++static struct platform_device gta02_pm_gsm_dev = {
++	.name = "gta02-pm-gsm",
++};
++
++static struct platform_device gta02_pm_wlan_dev = {
++	.name = "gta02-pm-wlan",
++};
++
++static struct regulator_consumer_supply gsm_supply_consumer = {
++	.dev = &gta02_pm_gsm_dev.dev,
++	.supply = "GSM",
++};
++
++static struct regulator_init_data gsm_supply_init_data = {
++	.constraints = {
++		.min_uV = 3700000,
++		.max_uV = 3700000,
++		.valid_modes_mask = REGULATOR_MODE_NORMAL,
++		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies = 1,
++	.consumer_supplies = &gsm_supply_consumer,
++};
++
++static struct fixed_voltage_config gsm_supply_config = {
++	.supply_name = "GSM",
++	.microvolts = 3700000,
++	.gpio = GTA02_GPIO_PCF(PCF50633_GPIO2),
++	.enable_high = 1,
++	.init_data = &gsm_supply_init_data,
++};
++
++static struct platform_device gta02_gsm_supply_device = {
++	.name = "reg-fixed-voltage",
++	.id = 1,
++	.dev = {
++		.platform_data = &gsm_supply_config,
++	},
++};
++
++/*
++ * we crank down SD Card clock dynamically when GPS is powered
++ */
++
++static int gta02_glamo_mci_use_slow(void)
++{
++	return gta02_pm_gps_is_on();
++}
++
++static void gta02_glamo_external_reset(int level)
++{
++	s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
++	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
++}
++
++struct spi_gpio_platform_data spigpio_platform_data = {
++	.sck = GTA02_GPIO_GLAMO(10),
++	.mosi = GTA02_GPIO_GLAMO(11),
++	.miso = GTA02_GPIO_GLAMO(5),
++	.num_chipselect = 1,
++};
++
++static struct platform_device spigpio_device = {
++	.name = "spi_gpio",
++	.id   = 2,
++	.dev = {
++		.platform_data = &spigpio_platform_data,
++	},
++};
++
++static struct fb_videomode gta02_glamo_modes[] = {
++	{
++		.name = "480x640",
++		.xres = 480,
++		.yres = 640,
++		.pixclock	= 40816,
++		.left_margin	= 8,
++		.right_margin	= 16,
++		.upper_margin	= 2,
++		.lower_margin	= 16,
++		.hsync_len	= 8,
++		.vsync_len	= 2,
++		.vmode = FB_VMODE_NONINTERLACED,
++	}, {
++		.name = "240x320",
++		.xres = 240,
++		.yres = 320,
++		.pixclock	= 40816,
++		.left_margin	= 8,
++		.right_margin	= 16,
++		.upper_margin	= 2,
++		.lower_margin	= 16,
++		.hsync_len	= 8,
++		.vsync_len	= 2,
++		.vmode = FB_VMODE_NONINTERLACED,
++	}
++};
++
++static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
++	.width  = 43,
++	.height = 58,
++
++	.num_modes = ARRAY_SIZE(gta02_glamo_modes),
++	.modes = gta02_glamo_modes,
++};
++
++static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
++	.glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
++};
++
++static struct glamo_gpio_platform_data gta02_glamo_gpio_pdata = {
++	.base = GTA02_GPIO_GLAMO_BASE,
++};
++
++static struct glamo_platform_data gta02_glamo_pdata = {
++	.fb_data    = &gta02_glamo_fb_pdata,
++	.mmc_data   = &gta02_glamo_mmc_pdata,
++	.gpio_data  = &gta02_glamo_gpio_pdata,
++
++	.osci_clock_rate = 32768,
++
++	.glamo_external_reset = gta02_glamo_external_reset,
++};
++
++/* JBT6k74 display controller */
++static void gta02_jbt6k74_probe_completed(struct device *dev)
++{
++	pcf50633_bl_set_brightness_limit(gta02_pcf, 0x3f);
++}
++
++const static struct jbt6k74_platform_data jbt6k74_pdata = {
++	.gpio_reset = GTA02_GPIO_GLAMO(4),
++};
++
++static struct spi_board_info gta02_spi_board_info[] = {
++	{
++		.modalias	= "jbt6k74",
++		.platform_data	= &jbt6k74_pdata,
++		.controller_data = (void *)GTA02_GPIO_GLAMO(12),
++		/* irq */
++		.max_speed_hz	= 100 * 1000,
++		.bus_num	= 2,
++		.chip_select	= 0
++	},
++};
++
++static struct resource gta02_glamo_resources[] = {
++	[0] = {
++		.start	= S3C2410_CS1,
++		.end	= S3C2410_CS1 + 0x1000000 - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= GTA02_IRQ_3D,
++		.end	= GTA02_IRQ_3D,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device gta02_glamo_dev = {
++	.name		= "glamo3362",
++	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
++	.resource	= gta02_glamo_resources,
++	.dev		= {
++		.platform_data	= &gta02_glamo_pdata,
++	},
++};
++
++
+ #ifdef CONFIG_CHARGER_PCF50633
+ /*
+  * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+@@ -159,22 +354,28 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ #define ADC_NOM_CHG_DETECT_1A 6
+ #define ADC_NOM_CHG_DETECT_USB 43
+ 
+-static void
+-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
++static int gta02_get_charger_online_status(void)
+ {
+-	int  ma;
++	struct pcf50633 *pcf = gta02_pcf;
+ 
+-	/* Interpret charger type */
+-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
++	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
++}
+ 
+-		/*
+-		 * Sanity - stop GPO driving out now that we have a 1A charger
+-		 * GPO controls USB Host power generation on GTA02
+-		 */
+-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
++static int gta02_get_charger_active_status(void)
++{
++	struct pcf50633 *pcf = gta02_pcf;
++
++	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
++}
++
++static void
++gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
++{
++	int ma;
+ 
++	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2))
+ 		ma = 1000;
+-	} else
++	else
+ 		ma = 100;
+ 
+ 	pcf50633_mbc_usb_curlim_set(pcf, ma);
+@@ -235,6 +436,8 @@ static void gta02_udc_vbus_draw(unsigned int ma)
+ #else /* !CONFIG_CHARGER_PCF50633 */
+ #define gta02_pmu_event_callback	NULL
+ #define gta02_udc_vbus_draw		NULL
++#define gta02_get_charger_online_status	NULL
++#define gta02_get_charger_active_status	NULL
+ #endif
+ 
+ /*
+@@ -258,6 +461,32 @@ static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ 	.ramp_time = 5,
+ };
+ 
++static struct regulator_consumer_supply ldo4_consumers[] = {
++	{
++		.dev = &gta02_pm_bt_dev.dev,
++		.supply = "BT_3V2",
++	},
++};
++
++static struct regulator_consumer_supply ldo5_consumers[] = {
++	{
++		.dev = &gta02_pm_gps_dev.dev,
++		.supply = "RF_3V",
++	},
++};
++
++static struct regulator_consumer_supply ldo6_consumers[] = {
++	REGULATOR_SUPPLY("VDC", "spi2.0"),
++	REGULATOR_SUPPLY("VDDIO", "spi2.0"),
++};
++
++static struct regulator_consumer_supply hcldo_consumers[] = {
++	{
++		.dev = &gta02_glamo_dev.dev,
++		.supply = "SD_3V3",
++	},
++};
++
+ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 	.resumers = {
+ 		[0] =	PCF50633_INT1_USBINS |
+@@ -276,6 +505,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 	.charger_reference_current_ma = 1000,
+ 
+ 	.backlight_data = &gta02_backlight_data,
++	.gpio_base = GTA02_GPIO_PCF_BASE,
+ 
+ 	.reg_init_data = {
+ 		[PCF50633_REGULATOR_AUTO] = {
+@@ -313,6 +543,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ 						REGULATOR_CHANGE_STATUS,
+ 			},
++			.num_consumer_supplies = ARRAY_SIZE(hcldo_consumers),
++			.consumer_supplies = hcldo_consumers,
+ 		},
+ 		[PCF50633_REGULATOR_LDO1] = {
+ 			.constraints = {
+@@ -347,6 +579,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ 				.apply_uV = 1,
+ 			},
++			.num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
++			.consumer_supplies = ldo4_consumers,
+ 		},
+ 		[PCF50633_REGULATOR_LDO5] = {
+ 			.constraints = {
+@@ -356,13 +590,18 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ 				.apply_uV = 1,
+ 			},
++			.num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
++			.consumer_supplies = ldo5_consumers,
+ 		},
+ 		[PCF50633_REGULATOR_LDO6] = {
+ 			.constraints = {
+ 				.min_uV = 3000000,
+ 				.max_uV = 3000000,
+ 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
++				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ 			},
++			.num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
++			.consumer_supplies = ldo6_consumers,
+ 		},
+ 		[PCF50633_REGULATOR_MEMLDO] = {
+ 			.constraints = {
+@@ -403,7 +642,6 @@ static struct platform_device gta02_nor_flash = {
+ 	.num_resources	= 1,
+ };
+ 
+-
+ struct platform_device s3c24xx_pwm_device = {
+ 	.name		= "s3c24xx_pwm",
+ 	.num_resources	= 0,
+@@ -449,6 +687,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+ 	.twrph1		= 15,
+ 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+ 	.sets		= gta02_nand_sets,
++	.software_ecc	= 1,
+ };
+ 
+ 
+@@ -506,6 +745,273 @@ static struct platform_device gta02_buttons_device = {
+ 	},
+ };
+ 
++/* LEDs */
++static struct gpio_led gta02_gpio_leds[] = {
++	{
++		.name	= "gta02:red:aux",
++		.gpio	= GTA02_GPIO_AUX_LED,
++	},
++};
++
++static struct gpio_led_platform_data gta02_gpio_leds_pdata = {
++	.leds = gta02_gpio_leds,
++	.num_leds = ARRAY_SIZE(gta02_gpio_leds),
++};
++
++static struct platform_device gta02_leds_device = {
++	.name = "leds-gpio",
++	.id   = -1,
++	.dev = {
++		.platform_data = &gta02_gpio_leds_pdata,
++	},
++};
++
++static inline int gta02_pwm_to_gpio(int pwm_id)
++{
++	return S3C2410_GPB(pwm_id);
++}
++
++static int gta02_pwm_led_init(struct device *dev, struct led_pwm *led)
++{
++	int ret;
++	int gpio = gta02_pwm_to_gpio(led->pwm_id);
++
++	ret = gpio_request(gpio, dev_name(dev));
++	if (ret)
++		return ret;
++
++	gpio_direction_output(gpio, 0);
++
++	return 0;
++}
++
++static enum led_brightness gta02_pwm_led_notify(struct device *dev,
++	struct led_pwm *led, enum led_brightness brightness)
++{
++	int gpio = gta02_pwm_to_gpio(led->pwm_id);
++
++	if (brightness == led->max_brightness || brightness == 0) {
++		s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_OUTPUT);
++		gpio_set_value(gpio, brightness ? 1 : 0);
++
++		brightness = 0;
++	} else {
++		s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_SFN2);
++	}
++
++	return brightness;
++}
++
++static void gta02_pwm_led_exit(struct device *dev, struct led_pwm *led)
++{
++	gpio_free(gta02_pwm_to_gpio(led->pwm_id));
++}
++
++static struct led_pwm gta02_pwm_leds[] = {
++	{
++		.name = "gta02:orange:power",
++		.max_brightness = 0xff,
++		.pwm_period_ns = 1000000,
++		.pwm_id = 0,
++	},
++	{
++		.name = "gta02:blue:power",
++		.max_brightness = 0xff,
++		.pwm_period_ns = 1000000,
++		.pwm_id = 1,
++	},
++	{
++		.name = "gta02::vibrator",
++		.max_brightness = 0x3f,
++		.pwm_period_ns = 60000000,
++		.pwm_id = 3,
++	}
++};
++
++static struct led_pwm_platform_data gta02_pwm_leds_pdata = {
++	.num_leds = ARRAY_SIZE(gta02_pwm_leds),
++	.leds = gta02_pwm_leds,
++
++	.init = gta02_pwm_led_init,
++	.notify = gta02_pwm_led_notify,
++	.exit = gta02_pwm_led_exit,
++};
++
++static struct platform_device gta02_pwm_leds_device = {
++	.name	= "leds_pwm",
++	.id	= -1,
++	.dev = {
++		.platform_data = &gta02_pwm_leds_pdata,
++	}
++};
++
++/* BQ27000 Battery */
++
++static struct bq27000_platform_data bq27000_pdata = {
++	.read = hdq_read,
++	.name = "battery",
++};
++
++static struct platform_device bq27000_battery_device = {
++	.name = "bq27000-battery",
++	.dev = {
++		.platform_data = &bq27000_pdata,
++	},
++};
++
++/* Platform battery */
++
++/* Capacity of a typical BL-5C dumb battery */
++#define GTA02_BAT_CHARGE_FULL	850000
++
++static int gta02_bat_voltscale(int volt)
++{
++	/* This table is suggested by SpeedEvil based on analysis of
++	 * experimental data */
++	static const int lut[][2] = {
++		{ 4120, 100 },
++		{ 3900, 60 },
++		{ 3740, 25 },
++		{ 3600, 5 },
++		{ 3000, 0 } };
++	int i, res = 0;
++
++	if (volt > lut[0][0])
++		res = lut[0][1];
++	else
++		for (i = 0; lut[i][1]; i++) {
++			if (volt <= lut[i][0] && volt >= lut[i+1][0]) {
++				res = lut[i][1] - (lut[i][0]-volt)*
++					(lut[i][1]-lut[i+1][1])/
++					(lut[i][0]-lut[i+1][0]);
++				break;
++			}
++		}
++	return res;
++}
++
++static int gta02_bat_get_voltage(void)
++{
++	struct pcf50633 *pcf = gta02_pcf;
++	u16 adc, mv = 0;
++	adc = pcf50633_adc_sync_read(pcf,
++		PCF50633_ADCC1_MUX_BATSNS_RES,
++		PCF50633_ADCC1_AVERAGE_16);
++	/* The formula from DS is for divide-by-two mode, current driver uses
++	divide-by-three */
++	mv = (adc * 6000) / 1023;
++	return mv * 1000;
++}
++
++static int gta02_bat_get_present(void)
++{
++	/* There is no reliable way to tell if it is present or not */
++	return 1;
++}
++
++static int gta02_bat_get_status(void)
++{
++#ifdef CONFIG_CHARGER_PCF50633
++	if (gta02_get_charger_active_status())
++		return POWER_SUPPLY_STATUS_CHARGING;
++	else
++		return POWER_SUPPLY_STATUS_DISCHARGING;
++#else
++	return POWER_SUPPLY_STATUS_UNKNOWN;
++#endif
++}
++
++static int gta02_bat_get_capacity(void)
++{
++	return gta02_bat_voltscale(gta02_bat_get_voltage()/1000);
++}
++
++static int gta02_bat_get_charge_full(void)
++{
++	return GTA02_BAT_CHARGE_FULL;
++}
++
++static int gta02_bat_get_charge_now(void)
++{
++	return gta02_bat_get_capacity() * gta02_bat_get_charge_full() / 100;
++}
++
++static enum power_supply_property gta02_platform_bat_properties[] = {
++	POWER_SUPPLY_PROP_PRESENT,
++	POWER_SUPPLY_PROP_STATUS,
++	POWER_SUPPLY_PROP_VOLTAGE_NOW,
++	POWER_SUPPLY_PROP_CAPACITY,
++	POWER_SUPPLY_PROP_CHARGE_FULL,
++	POWER_SUPPLY_PROP_CHARGE_NOW,
++};
++
++int (*gta02_platform_bat_get_property[])(void) = {
++	gta02_bat_get_present,
++	gta02_bat_get_status,
++	gta02_bat_get_voltage,
++	gta02_bat_get_capacity,
++	gta02_bat_get_charge_full,
++	gta02_bat_get_charge_now,
++};
++
++static struct platform_bat_platform_data gta02_platform_bat_pdata = {
++	.name = "battery",
++	.properties = gta02_platform_bat_properties,
++	.num_properties = ARRAY_SIZE(gta02_platform_bat_properties),
++	.get_property = gta02_platform_bat_get_property,
++	.is_present = gta02_bat_get_present,
++};
++
++struct platform_device gta02_platform_bat = {
++	.name = "platform_battery",
++	.id = -1,
++	.dev = {
++		.platform_data = &gta02_platform_bat_pdata,
++	}
++};
++
++/* HDQ */
++
++static void gta02_hdq_gpio_direction_out(void)
++{
++	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
++}
++
++static void gta02_hdq_gpio_direction_in(void)
++{
++	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
++}
++
++static void gta02_hdq_gpio_set_value(int val)
++{
++	s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
++}
++
++static int gta02_hdq_gpio_get_value(void)
++{
++	return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
++}
++
++struct hdq_platform_data gta02_hdq_platform_data = {
++	.gpio_dir_out = gta02_hdq_gpio_direction_out,
++	.gpio_dir_in = gta02_hdq_gpio_direction_in,
++	.gpio_set = gta02_hdq_gpio_set_value,
++	.gpio_get = gta02_hdq_gpio_get_value,
++
++	.enable_fiq = gta02_fiq_enable,
++	.disable_fiq = gta02_fiq_disable,
++	.kick_fiq = gta02_fiq_kick,
++};
++
++struct platform_device gta02_hdq_device = {
++	.name		= "hdq",
++	.id		= -1,
++	.dev		= {
++		.platform_data = &gta02_hdq_platform_data,
++		.parent = &s3c_device_timer[2].dev,
++	},
++};
++
+ static void __init gta02_map_io(void)
+ {
+ 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+@@ -523,19 +1029,30 @@ static struct platform_device *gta02_devices[] __initdata = {
+ 	&s3c_device_usbgadget,
+ 	&s3c_device_nand,
+ 	&gta02_nor_flash,
+-	&s3c24xx_pwm_device,
++	&s3c_device_timer[0],
++	&s3c_device_timer[1],
++	&s3c_device_timer[2],
++	&s3c_device_timer[3],
+ 	&s3c_device_iis,
+ 	&samsung_asoc_dma,
+ 	&s3c_device_i2c0,
+ 	&gta02_dfbmcs320_device,
+ 	&gta02_buttons_device,
++	&gta02_leds_device,
++	&gta02_pwm_leds_device,
+ 	&s3c_device_adc,
+ 	&s3c_device_ts,
++	&gta02_pm_bt_dev,
++	&gta02_pm_gps_dev,
++	&gta02_pm_wlan_dev,
++	&gta02_glamo_dev,
+ };
+ 
+ /* These guys DO need to be children of PMU. */
+ 
+ static struct platform_device *gta02_devices_pmu_children[] = {
++	&gta02_hdq_device,
++	&gta02_platform_bat,
+ };
+ 
+ 
+@@ -568,11 +1085,118 @@ static void gta02_poweroff(void)
+ 	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+ }
+ 
++struct gta02_device_children {
++	const char *dev_name;
++	size_t num_children;
++	struct platform_device **children;
++	void (*probed_callback)(struct device *dev);
++};
++
++static struct platform_device *gta02_glamo_gpio_children[] = {
++	&spigpio_device,
++};
++
++static struct platform_device *gta02_pcf50633_gpio_children[] = {
++	&gta02_gsm_supply_device,
++};
++
++static struct platform_device *gta02_gsm_supply_children[] = {
++	&gta02_pm_gsm_dev,
++};
++
++static struct platform_device *gta02_hdq_children[] = {
++	&bq27000_battery_device,
++};
++
++
++static struct gta02_device_children gta02_device_children[] = {
++ 	{
++		.dev_name = "glamo-gpio.0",
++		.num_children = ARRAY_SIZE(gta02_glamo_gpio_children),
++		.children = gta02_glamo_gpio_children,
++	},
++	{
++		.dev_name = "pcf50633-gpio",
++		.num_children = 1,
++		.children = gta02_pcf50633_gpio_children,
++	},
++	{
++		.dev_name = "reg-fixed-voltage.1",
++		.num_children = 1,
++		.children = gta02_gsm_supply_children,
++	},
++	{
++		.dev_name = "spi2.0",
++		.probed_callback = gta02_jbt6k74_probe_completed,
++	},
++	{
++		.dev_name = "hdq",
++		.num_children = 1,
++		.children = gta02_hdq_children,
++	},
++};
++
++static int gta02_add_child_devices(struct device *parent,
++		struct platform_device **children, size_t num_children)
++{
++	size_t i;
++
++	for (i = 0; i < num_children; ++i)
++		children[i]->dev.parent = parent;
++
++	return platform_add_devices(children, num_children);
++}
++
++static int gta02_device_registered(struct notifier_block *block,
++		unsigned long action, void *data)
++{
++	struct device *dev = data;
++	const char *devname = dev_name(dev);
++	size_t i;
++
++	if (action != BUS_NOTIFY_BOUND_DRIVER)
++		return 0;
++
++	for (i = 0; i < ARRAY_SIZE(gta02_device_children); ++i) {
++		if (strcmp(devname, gta02_device_children[i].dev_name) == 0) {
++			gta02_add_child_devices(dev, gta02_device_children[i].children,
++			gta02_device_children[i].num_children);
++
++			if (gta02_device_children[i].probed_callback)
++				gta02_device_children[i].probed_callback(dev);
++			break;
++		}
++	}
++
++	return 0;
++}
++
++static struct notifier_block gta02_device_register_notifier = {
++	.notifier_call = gta02_device_registered,
++	.priority = INT_MAX,
++};
++
++
++/*
++ * Allow the bootloader to enable hw ecc
++ * hardware_ecc=1|0
++ */
++static int __init hardware_ecc_setup(char *str)
++{
++	if (str && str[0] == '1')
++		gta02_nand_info.software_ecc = 0;
++	return 1;
++}
++__setup("hardware_ecc=", hardware_ecc_setup);
++
+ static void __init gta02_machine_init(void)
+ {
+ 	/* Set the panic callback to turn AUX LED on or off. */
+ 	panic_blink = gta02_panic_blink;
+ 
++	bus_register_notifier(&platform_bus_type, &gta02_device_register_notifier);
++	bus_register_notifier(&spi_bus_type, &gta02_device_register_notifier);
++
+ 	s3c_pm_init();
+ 
+ #ifdef CONFIG_CHARGER_PCF50633
+@@ -584,10 +1208,13 @@ static void __init gta02_machine_init(void)
+ 	s3c_ohci_set_platdata(&gta02_usb_info);
+ 	s3c_nand_set_platdata(&gta02_nand_info);
+ 	s3c_i2c0_set_platdata(NULL);
++	spi_register_board_info(gta02_spi_board_info,
++				ARRAY_SIZE(gta02_spi_board_info));
+ 
+ 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ 
+ 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
++
+ 	pm_power_off = gta02_poweroff;
+ 
+ 	regulator_has_full_constraints();
+diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
+index 243b641..72fa584 100644
+--- a/arch/arm/plat-s3c24xx/gpiolib.c
++++ b/arch/arm/plat-s3c24xx/gpiolib.c
+@@ -217,6 +217,8 @@ static __init int s3c24xx_gpiolib_init(void)
+ 	int gpn;
+ 
+ 	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
++		if (chip->chip.base >= S3C_GPIO_END)
++			break;
+ 		if (!chip->config)
+ 			chip->config = &s3c24xx_gpiocfg_default;
+ 
+diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
+index ec087d6..3256861 100644
+--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
++++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
+@@ -12,6 +12,7 @@
+ 
+ #include <linux/io.h>
+ 
++#include <mach/irqs.h>
+ #include <mach/hardware.h>
+ #include <mach/regs-irq.h>
+ #include <mach/regs-gpio.h>
+@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+ {
+ 	unsigned long mask;
+ 	unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 
+ 	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+ 
+ 	/* write back masks */
+ 	__raw_writel(submask, S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ 
+ }
+ 
+@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+ {
+ 	unsigned long mask;
+ 	unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 
+ 	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+ 	/* write back masks */
+ 	__raw_writel(submask, S3C2410_INTSUBMSK);
+ 	__raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ 
+diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
+index 9aee7e1..1317f04 100644
+--- a/arch/arm/plat-s3c24xx/irq.c
++++ b/arch/arm/plat-s3c24xx/irq.c
+@@ -28,6 +28,8 @@
+ #include <asm/mach/irq.h>
+ 
+ #include <plat/regs-irqtype.h>
++#include <mach/regs-irq.h>
++#include <mach/regs-gpio.h>
+ 
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -39,9 +41,20 @@ s3c_irq_mask(struct irq_data *data)
+ 	unsigned int irqno = data->irq - IRQ_EINT0;
+ 	unsigned long mask;
+ 
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
++
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	mask |= 1UL << irqno;
+ 	__raw_writel(mask, S3C2410_INTMSK);
++
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ static inline void
+@@ -58,9 +71,19 @@ s3c_irq_maskack(struct irq_data *data)
+ {
+ 	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ 	unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	__raw_writel(mask|bitval, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ 
+ 	__raw_writel(bitval, S3C2410_SRCPND);
+ 	__raw_writel(bitval, S3C2410_INTPND);
+@@ -72,15 +95,25 @@ s3c_irq_unmask(struct irq_data *data)
+ {
+ 	unsigned int irqno = data->irq;
+ 	unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++	unsigned long flags;
++#endif
+ 
+ 	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ 		irqdbf2("s3c_irq_unmask %d\n", irqno);
+ 
+ 	irqno -= IRQ_EINT0;
+ 
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_save_flags(flags);
++	local_fiq_disable();
++#endif
+ 	mask = __raw_readl(S3C2410_INTMSK);
+ 	mask &= ~(1UL << irqno);
+ 	__raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++	local_irq_restore(flags);
++#endif
+ }
+ 
+ struct irq_chip s3c_irq_level_chip = {
+@@ -553,26 +586,26 @@ void __init s3c24xx_init_irq(void)
+ 
+ 	last = 0;
+ 	for (i = 0; i < 4; i++) {
+-		pend = __raw_readl(S3C2410_INTPND);
++		pend = __raw_readl(S3C2410_SUBSRCPND);
+ 
+ 		if (pend == 0 || pend == last)
+ 			break;
+ 
+-		__raw_writel(pend, S3C2410_SRCPND);
+-		__raw_writel(pend, S3C2410_INTPND);
+-		printk("irq: clearing pending status %08x\n", (int)pend);
++		printk("irq: clearing subpending status %08x\n", (int)pend);
++		__raw_writel(pend, S3C2410_SUBSRCPND);
+ 		last = pend;
+ 	}
+ 
+ 	last = 0;
+ 	for (i = 0; i < 4; i++) {
+-		pend = __raw_readl(S3C2410_SUBSRCPND);
++		pend = __raw_readl(S3C2410_INTPND);
+ 
+ 		if (pend == 0 || pend == last)
+ 			break;
+ 
+-		printk("irq: clearing subpending status %08x\n", (int)pend);
+-		__raw_writel(pend, S3C2410_SUBSRCPND);
++		__raw_writel(pend, S3C2410_SRCPND);
++		__raw_writel(pend, S3C2410_INTPND);
++		printk("irq: clearing pending status %08x\n", (int)pend);
+ 		last = pend;
+ 	}
+ 
+@@ -624,14 +657,14 @@ void __init s3c24xx_init_irq(void)
+ 	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ 		irqdbf("registering irq %d (ext int)\n", irqno);
+ 		irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
+-					 handle_edge_irq);
++					 handle_level_irq);
+ 		set_irq_flags(irqno, IRQF_VALID);
+ 	}
+ 
+ 	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+ 		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+ 		irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
+-					 handle_edge_irq);
++					 handle_level_irq);
+ 		set_irq_flags(irqno, IRQF_VALID);
+ 	}
+ 
+diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
+index b64115f..cbdc8f0 100644
+--- a/arch/arm/plat-samsung/include/plat/nand.h
++++ b/arch/arm/plat-samsung/include/plat/nand.h
+@@ -49,6 +49,7 @@ struct s3c2410_platform_nand {
+ 	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
+ 
+ 	unsigned int	ignore_unset_ecc:1;
++	unsigned int	software_ecc:1; /* force software ecc at runtime */
+ 
+ 	int			nr_sets;
+ 	struct s3c2410_nand_set *sets;
+diff --git a/drivers/Kconfig b/drivers/Kconfig
+index 177c7d1..14e9dd6 100644
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -116,6 +116,8 @@ source "drivers/staging/Kconfig"
+ 
+ source "drivers/platform/Kconfig"
+ 
++source "drivers/ar6000/Kconfig"
++
+ source "drivers/clk/Kconfig"
+ 
+ source "drivers/hwspinlock/Kconfig"
+diff --git a/drivers/Makefile b/drivers/Makefile
+index 3f135b6..1077025 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
+ obj-$(CONFIG_DMA_ENGINE)	+= dma/
+ obj-$(CONFIG_MMC)		+= mmc/
+ obj-$(CONFIG_MEMSTICK)		+= memstick/
++obj-$(CONFIG_AR6000_WLAN)	+= ar6000/
+ obj-$(CONFIG_NEW_LEDS)		+= leds/
+ obj-$(CONFIG_INFINIBAND)	+= infiniband/
+ obj-$(CONFIG_SGI_SN)		+= sn/
+diff --git a/drivers/ar6000/Kconfig b/drivers/ar6000/Kconfig
+new file mode 100644
+index 0000000..29b28b8
+--- /dev/null
++++ b/drivers/ar6000/Kconfig
+@@ -0,0 +1,32 @@
++config AR6000_WLAN
++	tristate "AR6000 wireless networking over SDIO"
++	depends on MMC
++	select WIRELESS_EXT
++	select WEXT_PRIV
++	default m
++	help
++	  good luck.
++
++config AR6000_WLAN_DEBUG
++	bool "Enable retrieval of firmware debugging information"
++	depends on AR6000_WLAN
++	default n
++	help
++	  The AR6k firmware maintains a log of debugging events that
++	  gets flushed to the host on various occasions. Retrieval of
++	  this data is very slow, taking several seconds.
++
++	  If in doubt, say N.
++
++config AR6000_WLAN_RESET
++	bool "Soft-reset when shutting down"
++	depends on AR6000_WLAN
++	default n
++	help
++	  The AR6k module can be explicitly reset when shutting down
++	  the device. This adds a delay of about two seconds to suspend,
++	  module removal, and so on. Since the WLAN SDIO function is
++	  generally disabled soon thereafter anyway, this reset seems
++	  superfluous.
++
++	  If in doubt, say N.
+diff --git a/drivers/ar6000/Makefile b/drivers/ar6000/Makefile
+new file mode 100644
+index 0000000..f8f4431
+--- /dev/null
++++ b/drivers/ar6000/Makefile
+@@ -0,0 +1,38 @@
++REV ?= 2
++
++PWD := $(shell pwd)
++
++EXTRA_CFLAGS += -I$(src)/include
++
++EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\
++                -DTCMD -DUSER_KEYS \
++                -DNO_SYNC_FLUSH #\
++                -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \
++                -DBLOCK_TX_PATH_FLAG \
++		-DSDIO \
++
++EXTRA_CFLAGS += -DKERNEL_2_6
++
++obj-$(CONFIG_AR6000_WLAN) += ar6000.o
++
++ar6000-objs += htc/ar6k.o      		   \
++	       htc/ar6k_events.o 	   \
++               htc/htc_send.o       	   \
++               htc/htc_recv.o       	   \
++               htc/htc_services.o          \
++               htc/htc.o     		   \
++               hif/hif2.o     		   \
++               bmi/bmi.o                   \
++               ar6000/ar6000_drv.o         \
++               ar6000/ar6000_raw_if.o	   \
++               ar6000/netbuf.o		   \
++               ar6000/wireless_ext.o	   \
++               ar6000/ioctl.o		   \
++               miscdrv/common_drv.o	   \
++               miscdrv/credit_dist.o	   \
++               wmi/wmi.o                   \
++               wlan/wlan_node.o            \
++               wlan/wlan_recv_beacon.o     \
++               wlan/wlan_utils.o
++
++
+diff --git a/drivers/ar6000/ar6000/ar6000_drv.c b/drivers/ar6000/ar6000/ar6000_drv.c
+new file mode 100644
+index 0000000..90533ab
+--- /dev/null
++++ b/drivers/ar6000/ar6000/ar6000_drv.c
+@@ -0,0 +1,3129 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * This driver is a pseudo ethernet driver to access the Atheros AR6000
++ * WLAN Device
++ */
++static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $";
++
++#include "ar6000_drv.h"
++#include "htc.h"
++
++MODULE_LICENSE("GPL and additional rights");
++
++#ifndef REORG_APTC_HEURISTICS
++#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++#endif /* REORG_APTC_HEURISTICS */
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++#define APTC_TRAFFIC_SAMPLING_INTERVAL     100  /* msec */
++#define APTC_UPPER_THROUGHPUT_THRESHOLD    3000 /* Kbps */
++#define APTC_LOWER_THROUGHPUT_THRESHOLD    2000 /* Kbps */
++
++typedef struct aptc_traffic_record {
++    A_BOOL timerScheduled;
++    struct timeval samplingTS;
++    unsigned long bytesReceived;
++    unsigned long bytesTransmitted;
++} APTC_TRAFFIC_RECORD;
++
++A_TIMER aptcTimer;
++APTC_TRAFFIC_RECORD aptcTR;
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++unsigned int bypasswmi = 0;
++unsigned int debuglevel = 0;
++int tspecCompliance = 1;
++unsigned int busspeedlow = 0;
++unsigned int onebitmode = 0;
++unsigned int skipflash = 0;
++unsigned int wmitimeout = 2;
++unsigned int wlanNodeCaching = 1;
++unsigned int enableuartprint = 0;
++unsigned int logWmiRawMsgs = 0;
++unsigned int enabletimerwar = 0;
++unsigned int mbox_yield_limit = 99;
++int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
++int allow_trace_signal = 0;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++unsigned int testmode =0;
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(bypasswmi, int, 0644);
++module_param(debuglevel, int, 0644);
++module_param(tspecCompliance, int, 0644);
++module_param(onebitmode, int, 0644);
++module_param(busspeedlow, int, 0644);
++module_param(skipflash, int, 0644);
++module_param(wmitimeout, int, 0644);
++module_param(wlanNodeCaching, int, 0644);
++module_param(logWmiRawMsgs, int, 0644);
++module_param(enableuartprint, int, 0644);
++module_param(enabletimerwar, int, 0644);
++module_param(mbox_yield_limit, int, 0644);
++module_param(reduce_credit_dribble, int, 0644);
++module_param(allow_trace_signal, int, 0644);
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++module_param(testmode, int, 0644);
++#endif
++#else
++
++#define __user
++/* for linux 2.4 and lower */
++MODULE_PARM(bypasswmi,"i");
++MODULE_PARM(debuglevel, "i");
++MODULE_PARM(onebitmode,"i");
++MODULE_PARM(busspeedlow, "i");
++MODULE_PARM(skipflash, "i");
++MODULE_PARM(wmitimeout, "i");
++MODULE_PARM(wlanNodeCaching, "i");
++MODULE_PARM(enableuartprint,"i");
++MODULE_PARM(logWmiRawMsgs, "i");
++MODULE_PARM(enabletimerwar,"i");
++MODULE_PARM(mbox_yield_limit,"i");
++MODULE_PARM(reduce_credit_dribble,"i");
++MODULE_PARM(allow_trace_signal,"i");
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++MODULE_PARM(testmode, "i");
++#endif
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
++/* in 2.6.10 and later this is now a pointer to a uint */
++unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
++#define mboxnum &_mboxnum
++#else
++unsigned int mboxnum = HTC_MAILBOX_NUM_MAX;
++#endif
++
++#ifdef CONFIG_AR6000_WLAN_RESET
++unsigned int resetok = 1;
++#else
++unsigned int resetok = 0;
++#endif
++
++#ifdef DEBUG
++A_UINT32 g_dbg_flags = DBG_DEFAULTS;
++unsigned int debugflags = 0;
++int debugdriver = 1;
++unsigned int debughtc = 128;
++unsigned int debugbmi = 1;
++unsigned int debughif = 2;
++unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(debugflags, int, 0644);
++module_param(debugdriver, int, 0644);
++module_param(debughtc, int, 0644);
++module_param(debugbmi, int, 0644);
++module_param(debughif, int, 0644);
++module_param(resetok, int, 0644);
++module_param_array(txcreditsavailable, int, mboxnum, 0644);
++module_param_array(txcreditsconsumed, int, mboxnum, 0644);
++module_param_array(txcreditintrenable, int, mboxnum, 0644);
++module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644);
++#else
++/* linux 2.4 and lower */
++MODULE_PARM(debugflags,"i");
++MODULE_PARM(debugdriver, "i");
++MODULE_PARM(debughtc, "i");
++MODULE_PARM(debugbmi, "i");
++MODULE_PARM(debughif, "i");
++MODULE_PARM(resetok, "i");
++MODULE_PARM(txcreditsavailable, "0-3i");
++MODULE_PARM(txcreditsconsumed, "0-3i");
++MODULE_PARM(txcreditintrenable, "0-3i");
++MODULE_PARM(txcreditintrenableaggregate, "0-3i");
++#endif
++
++#endif /* DEBUG */
++
++unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int hifBusRequestNumMax = 40;
++unsigned int war23838_disabled = 0;
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++unsigned int enableAPTCHeuristics = 1;
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param_array(tx_attempt, int, mboxnum, 0644);
++module_param_array(tx_post, int, mboxnum, 0644);
++module_param_array(tx_complete, int, mboxnum, 0644);
++module_param(hifBusRequestNumMax, int, 0644);
++module_param(war23838_disabled, int, 0644);
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++module_param(enableAPTCHeuristics, int, 0644);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#else
++MODULE_PARM(tx_attempt, "0-3i");
++MODULE_PARM(tx_post, "0-3i");
++MODULE_PARM(tx_complete, "0-3i");
++MODULE_PARM(hifBusRequestNumMax, "i");
++MODULE_PARM(war23838_disabled, "i");
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++MODULE_PARM(enableAPTCHeuristics, "i");
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#endif
++
++#ifdef BLOCK_TX_PATH_FLAG
++int blocktx = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(blocktx, int, 0644);
++#else
++MODULE_PARM(blocktx, "i");
++#endif
++#endif /* BLOCK_TX_PATH_FLAG */
++
++// TODO move to arsoft_c
++USER_RSSI_THOLD rssi_map[12];
++
++int reconnect_flag = 0;
++
++DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue);
++
++/* Function declarations */
++static int ar6000_init_module(void);
++static void ar6000_cleanup_module(void);
++
++int ar6000_init(struct net_device *dev);
++static int ar6000_open(struct net_device *dev);
++static int ar6000_close(struct net_device *dev);
++static int ar6000_cleanup(struct net_device *dev);
++static void ar6000_init_control_info(AR_SOFTC_T *ar);
++static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
++
++static void ar6000_destroy(struct net_device *dev, unsigned int unregister);
++static void ar6000_detect_error(unsigned long ptr);
++static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
++static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
++
++/*
++ * HTC service connection handlers
++ */
++static void ar6000_avail_ev(HTC_HANDLE HTCHandle);
++
++static void ar6000_unavail_ev(void *Instance);
++
++static void ar6000_target_failure(void *Instance, A_STATUS Status);
++
++static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
++
++static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
++
++static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket);
++
++static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint);
++
++static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint);
++
++/*
++ * Static variables
++ */
++
++static struct net_device *ar6000_devices[MAX_AR6000];
++extern struct iw_handler_def ath_iw_handler_def;
++DECLARE_WAIT_QUEUE_HEAD(arEvent);
++static void ar6000_cookie_init(AR_SOFTC_T *ar);
++static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
++static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
++static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
++static void ar6000_TxDataCleanup(AR_SOFTC_T *ar);
++
++#ifdef USER_KEYS
++static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
++#endif
++
++
++static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
++
++#define HOST_INTEREST_ITEM_ADDRESS(ar, item)    \
++((ar->arTargetType == TARGET_TYPE_AR6001) ?     \
++   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
++   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
++
++
++/* Debug log support */
++
++/*
++ * Flag to govern whether the debug logs should be parsed in the kernel
++ * or reported to the application.
++ */
++#ifdef DEBUG
++#define REPORT_DEBUG_LOGS_TO_APP
++#endif
++
++A_STATUS
++ar6000_set_host_app_area(AR_SOFTC_T *ar)
++{
++    A_UINT32 address, data;
++    struct host_app_area_s host_app_area;
++
++    /* Fetch the address of the host_app_area_s instance in the host interest area */
++    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest);
++    if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
++        return A_ERROR;
++    }
++    address = data;
++    host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
++    if (ar6000_WriteDataDiag(ar->arHifDevice, address,
++                             (A_UCHAR *)&host_app_area,
++                             sizeof(struct host_app_area_s)) != A_OK)
++    {
++        return A_ERROR;
++    }
++
++    return A_OK;
++}
++
++A_UINT32
++dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
++{
++    A_UINT32 param;
++    A_UINT32 address;
++    A_STATUS status;
++
++    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr);
++    if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                      (A_UCHAR *)&param, 4)) != A_OK)
++    {
++        param = 0;
++    }
++
++    return param;
++}
++
++/*
++ * The dbglog module has been initialized. Its ok to access the relevant
++ * data stuctures over the diagnostic window.
++ */
++void
++ar6000_dbglog_init_done(AR_SOFTC_T *ar)
++{
++    ar->dbglog_init_done = TRUE;
++}
++
++A_UINT32
++dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
++{
++    A_INT32 *buffer;
++    A_UINT32 count;
++    A_UINT32 numargs;
++    A_UINT32 length;
++    A_UINT32 fraglen;
++
++    count = fraglen = 0;
++    buffer = (A_INT32 *)datap;
++    length = (limit >> 2);
++
++    if (len <= limit) {
++        fraglen = len;
++    } else {
++        while (count < length) {
++            numargs = DBGLOG_GET_NUMARGS(buffer[count]);
++            fraglen = (count << 2);
++            count += numargs + 1;
++        }
++    }
++
++    return fraglen;
++}
++
++void
++dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
++{
++    A_INT32 *buffer;
++    A_UINT32 count;
++    A_UINT32 timestamp;
++    A_UINT32 debugid;
++    A_UINT32 moduleid;
++    A_UINT32 numargs;
++    A_UINT32 length;
++
++    count = 0;
++    buffer = (A_INT32 *)datap;
++    length = (len >> 2);
++    while (count < length) {
++        debugid = DBGLOG_GET_DBGID(buffer[count]);
++        moduleid = DBGLOG_GET_MODULEID(buffer[count]);
++        numargs = DBGLOG_GET_NUMARGS(buffer[count]);
++        timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
++        switch (numargs) {
++            case 0:
++            AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp);
++            break;
++
++            case 1:
++            AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid,
++                            timestamp, buffer[count+1]);
++            break;
++
++            case 2:
++            AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
++                            timestamp, buffer[count+1], buffer[count+2]);
++            break;
++
++            default:
++            AR_DEBUG_PRINTF("Invalid args: %d\n", numargs);
++        }
++        count += numargs + 1;
++    }
++}
++
++int
++ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
++{
++    struct dbglog_hdr_s debug_hdr;
++    struct dbglog_buf_s debug_buf;
++    A_UINT32 address;
++    A_UINT32 length;
++    A_UINT32 dropped;
++    A_UINT32 firstbuf;
++    A_UINT32 debug_hdr_ptr;
++
++    if (!ar->dbglog_init_done) return A_ERROR;
++
++#ifndef CONFIG_AR6000_WLAN_DEBUG
++    return 0;
++#endif
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (ar->dbgLogFetchInProgress) {
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        return A_EBUSY;
++    }
++
++        /* block out others */
++    ar->dbgLogFetchInProgress = TRUE;
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
++    printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
++
++    /* Get the contents of the ring buffer */
++    if (debug_hdr_ptr) {
++        address = debug_hdr_ptr;
++        length = sizeof(struct dbglog_hdr_s);
++        ar6000_ReadDataDiag(ar->arHifDevice, address,
++                            (A_UCHAR *)&debug_hdr, length);
++        address = (A_UINT32)debug_hdr.dbuf;
++        firstbuf = address;
++        dropped = debug_hdr.dropped;
++        length = sizeof(struct dbglog_buf_s);
++        ar6000_ReadDataDiag(ar->arHifDevice, address,
++                            (A_UCHAR *)&debug_buf, length);
++
++        do {
++            address = (A_UINT32)debug_buf.buffer;
++            length = debug_buf.length;
++            if ((length) && (debug_buf.length <= debug_buf.bufsize)) {
++                /* Rewind the index if it is about to overrun the buffer */
++                if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
++                    ar->log_cnt = 0;
++                }
++                if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                    (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
++                {
++                    break;
++                }
++                ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length);
++                ar->log_cnt += length;
++            } else {
++                AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n",
++                                debug_buf.length, debug_buf.bufsize);
++            }
++
++            address = (A_UINT32)debug_buf.next;
++            length = sizeof(struct dbglog_buf_s);
++            if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                (A_UCHAR *)&debug_buf, length))
++            {
++                break;
++            }
++
++        } while (address != firstbuf);
++    }
++
++    ar->dbgLogFetchInProgress = FALSE;
++
++    return A_OK;
++}
++
++void
++ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
++                    A_INT8 *buffer, A_UINT32 length)
++{
++#ifdef REPORT_DEBUG_LOGS_TO_APP
++    #define MAX_WIRELESS_EVENT_SIZE 252
++    /*
++     * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
++     * There seems to be a limitation on the length of message that could be
++     * transmitted to the user app via this mechanism.
++     */
++    A_UINT32 send, sent;
++
++    sent = 0;
++    send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
++                                     MAX_WIRELESS_EVENT_SIZE);
++    while (send) {
++        ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send);
++        sent += send;
++        send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
++                                         MAX_WIRELESS_EVENT_SIZE);
++    }
++#else
++    AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n",
++                    dropped, length);
++
++    /* Interpret the debug logs */
++    dbglog_parse_debug_logs(buffer, length);
++#endif /* REPORT_DEBUG_LOGS_TO_APP */
++}
++
++
++
++static int __init
++ar6000_init_module(void)
++{
++    static int probed = 0;
++    A_STATUS status;
++    HTC_INIT_INFO initInfo;
++
++    A_MEMZERO(&initInfo,sizeof(initInfo));
++    initInfo.AddInstance = ar6000_avail_ev;
++    initInfo.DeleteInstance = ar6000_unavail_ev;
++    initInfo.TargetFailure = ar6000_target_failure;
++
++
++#ifdef DEBUG
++    /* Set the debug flags if specified at load time */
++    if(debugflags != 0)
++    {
++        g_dbg_flags = debugflags;
++    }
++#endif
++
++    if (probed) {
++        return -ENODEV;
++    }
++    probed++;
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++    ar6000_gpio_init();
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++    status = HTCInit(&initInfo);
++    if(status != A_OK)
++        return -ENODEV;
++
++    return 0;
++}
++
++static void __exit
++ar6000_cleanup_module(void)
++{
++    int i = 0;
++    struct net_device *ar6000_netdev;
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    /* Delete the Adaptive Power Control timer */
++    if (timer_pending(&aptcTimer)) {
++        del_timer_sync(&aptcTimer);
++    }
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++    for (i=0; i < MAX_AR6000; i++) {
++        if (ar6000_devices[i] != NULL) {
++            ar6000_netdev = ar6000_devices[i];
++            ar6000_devices[i] = NULL;
++            ar6000_destroy(ar6000_netdev, 1);
++        }
++    }
++
++        /* shutting down HTC will cause the HIF layer to detach from the
++         * underlying bus driver which will cause the subsequent deletion of
++         * all HIF and HTC instances */
++    HTCShutDown();
++
++    AR_DEBUG_PRINTF("ar6000_cleanup: success\n");
++}
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++void
++aptcTimerHandler(unsigned long arg)
++{
++    A_UINT32 numbytes;
++    A_UINT32 throughput;
++    AR_SOFTC_T *ar;
++    A_STATUS status;
++
++    ar = (AR_SOFTC_T *)arg;
++    A_ASSERT(ar != NULL);
++    A_ASSERT(!timer_pending(&aptcTimer));
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    /* Get the number of bytes transferred */
++    numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
++    aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
++
++    /* Calculate and decide based on throughput thresholds */
++    throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
++    if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
++        /* Enable Sleep and delete the timer */
++        A_ASSERT(ar->arWmiReady == TRUE);
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
++        AR6000_SPIN_LOCK(&ar->arLock, 0);
++        A_ASSERT(status == A_OK);
++        aptcTR.timerScheduled = FALSE;
++    } else {
++        A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++
++
++/* set HTC block size, assume BMI is already initialized */
++A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar)
++{
++    A_STATUS status;
++    A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX];
++
++    do {
++            /* get the block sizes */
++        status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    blocksizes, sizeof(blocksizes));
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n");
++            break;
++        }
++            /* note: we actually get the block size for mailbox 1, for SDIO the block
++             * size on mailbox 0 is artificially set to 1 */
++            /* must be a power of 2 */
++        A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0);
++
++            /* set the host interest area for the block size */
++        status = BMIWriteMemory(ar->arHifDevice,
++                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz),
++                                (A_UCHAR *)&blocksizes[1],
++                                4);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n");
++            break;
++        }
++
++        AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n",
++                blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz));
++
++            /* set the host interest area for the mbox ISR yield limit */
++        status = BMIWriteMemory(ar->arHifDevice,
++                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit),
++                                (A_UCHAR *)&mbox_yield_limit,
++                                4);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n");
++            break;
++        }
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void free_raw_buffers(AR_SOFTC_T *ar)
++{
++    int i, j;
++
++    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
++	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++)
++	    kfree(ar->raw_htc_read_buffer[i][j]);
++	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++)
++	    kfree(ar->raw_htc_write_buffer[i][j]);
++    }
++}
++
++static int alloc_raw_buffers(AR_SOFTC_T *ar)
++{
++    int i, j;
++    raw_htc_buffer *b;
++
++    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
++	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) {
++	    b = kzalloc(sizeof(*b), GFP_KERNEL);
++	    if (!b)
++		return -ENOMEM;
++	    ar->raw_htc_read_buffer[i][j] = b;
++	}
++	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) {
++	    b = kzalloc(sizeof(*b), GFP_KERNEL);
++	    if (!b)
++		return -ENOMEM;
++	    ar->raw_htc_write_buffer[i][j] = b;
++	}
++    }
++    return 0;
++}
++
++static const struct net_device_ops ar6000_netdev_ops = {
++    .ndo_init = &ar6000_init,
++    .ndo_open = &ar6000_open,
++    .ndo_stop = &ar6000_close,
++    .ndo_start_xmit = &ar6000_data_tx,
++    .ndo_get_stats = &ar6000_get_stats,
++    .ndo_do_ioctl = &ar6000_ioctl,
++};
++/*
++ * HTC Event handlers
++ */
++static void
++ar6000_avail_ev(HTC_HANDLE HTCHandle)
++{
++    int i;
++    struct net_device *dev;
++    AR_SOFTC_T *ar;
++    int device_index = 0;
++
++    AR_DEBUG_PRINTF("ar6000_available\n");
++
++    for (i=0; i < MAX_AR6000; i++) {
++        if (ar6000_devices[i] == NULL) {
++            break;
++        }
++    }
++
++    if (i == MAX_AR6000) {
++        AR_DEBUG_PRINTF("ar6000_available: max devices reached\n");
++        return;
++    }
++
++    /* Save this. It gives a bit better readability especially since */
++    /* we use another local "i" variable below.                      */
++    device_index = i;
++
++    A_ASSERT(HTCHandle != NULL);
++
++    dev = alloc_etherdev(sizeof(AR_SOFTC_T));
++    if (dev == NULL) {
++        AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n");
++        return;
++    }
++
++    ether_setup(dev);
++
++    if (netdev_priv(dev) == NULL) {
++        printk(KERN_CRIT "ar6000_available: Could not allocate memory\n");
++        return;
++    }
++
++    A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T));
++
++    ar                       = (AR_SOFTC_T *)netdev_priv(dev);
++    ar->arNetDev             = dev;
++    ar->arHtcTarget          = HTCHandle;
++    ar->arHifDevice          = HTCGetHifDevice(HTCHandle);
++    ar->arWlanState          = WLAN_ENABLED;
++    ar->arRadioSwitch        = WLAN_ENABLED;
++    ar->arDeviceIndex        = device_index;
++
++    A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
++    ar->arHBChallengeResp.seqNum = 0;
++    ar->arHBChallengeResp.outstanding = FALSE;
++    ar->arHBChallengeResp.missCnt = 0;
++    ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
++    ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
++
++    ar6000_init_control_info(ar);
++    init_waitqueue_head(&arEvent);
++    sema_init(&ar->arSem, 1);
++
++    if (alloc_raw_buffers(ar)) {
++	free_raw_buffers(ar);
++	/*
++	 * @@@ Clean up our own mess, but for anything else, cheerfully mimick
++	 * the beautiful error non-handling of the rest of this function.
++	 */
++	return;
++    }
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++    /*
++     * If requested, perform some magic which requires no cooperation from
++     * the Target.  It causes the Target to ignore flash and execute to the
++     * OS from ROM.
++     *
++     * This is intended to support recovery from a corrupted flash on Targets
++     * that support flash.
++     */
++    if (skipflash)
++    {
++        ar6000_reset_device_skipflash(ar->arHifDevice);
++            }
++
++    BMIInit();
++    {
++        struct bmi_target_info targ_info;
++
++        if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
++            return;
++        }
++
++        ar->arVersion.target_ver = targ_info.target_ver;
++        ar->arTargetType = targ_info.target_type;
++    }
++
++    if (enableuartprint) {
++        A_UINT32 param;
++        param = 1;
++        if (BMIWriteMemory(ar->arHifDevice,
++                           HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
++                           (A_UCHAR *)&param,
++                           4)!= A_OK)
++        {
++             AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n");
++             return ;
++        }
++        AR_DEBUG_PRINTF("Serial console prints enabled\n");
++    }
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    if(testmode) {
++        ar->arTargetMode = AR6000_TCMD_MODE;
++    }else {
++        ar->arTargetMode = AR6000_WLAN_MODE;
++    }
++#endif
++    if (enabletimerwar) {
++        A_UINT32 param;
++
++        if (BMIReadMemory(ar->arHifDevice,
++            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
++            (A_UCHAR *)&param,
++            4)!= A_OK)
++        {
++            AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n");
++            return;
++        }
++
++        param |= HI_OPTION_TIMER_WAR;
++
++        if (BMIWriteMemory(ar->arHifDevice,
++            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
++            (A_UCHAR *)&param,
++            4) != A_OK)
++        {
++            AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n");
++            return;
++        }
++        AR_DEBUG_PRINTF("Timer WAR enabled\n");
++    }
++
++
++        /* since BMIInit is called in the driver layer, we have to set the block
++         * size here for the target */
++
++    if (A_FAILED(ar6000_SetHTCBlockSize(ar))) {
++        return;
++    }
++
++    spin_lock_init(&ar->arLock);
++
++    dev->netdev_ops = &ar6000_netdev_ops;
++    dev->watchdog_timeo = AR6000_TX_TIMEOUT;
++    ar6000_ioctl_iwsetup(&ath_iw_handler_def);
++    dev->wireless_handlers = &ath_iw_handler_def;
++    ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
++
++    /*
++     * We need the OS to provide us with more headroom in order to
++     * perform dix to 802.3, WMI header encap, and the HTC header
++     */
++    dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
++        sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN;
++
++    /* This runs the init function */
++    SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice));
++    if (register_netdev(dev)) {
++        AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n");
++        ar6000_destroy(dev, 0);
++        return;
++    }
++
++    HTCSetInstance(ar->arHtcTarget, ar);
++
++    /* We only register the device in the global list if we succeed. */
++    /* If the device is in the global list, it will be destroyed     */
++    /* when the module is unloaded.                                  */
++    ar6000_devices[device_index] = dev;
++
++    AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n",
++                    dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index,
++                    (A_UINT32)ar);
++}
++
++static void ar6000_target_failure(void *Instance, A_STATUS Status)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
++    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
++    static A_BOOL sip = FALSE;
++
++    if (Status != A_OK) {
++        if (timer_pending(&ar->arHBChallengeResp.timer)) {
++            A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
++        }
++
++        /* try dumping target assertion information (if any) */
++        ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
++
++        /*
++         * Fetch the logs from the target via the diagnostic
++         * window.
++         */
++        ar6000_dbglog_get_debug_logs(ar);
++
++        /* Report the error only once */
++        if (!sip) {
++            sip = TRUE;
++            errEvent.errorVal = WMI_TARGET_COM_ERR |
++                                WMI_TARGET_FATAL_ERR;
++#ifdef SEND_EVENT_TO_APP
++            ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
++                                     (A_UINT8 *)&errEvent,
++                                     sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
++#endif
++        }
++    }
++}
++
++static void
++ar6000_unavail_ev(void *Instance)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
++        /* NULL out it's entry in the global list */
++    ar6000_devices[ar->arDeviceIndex] = NULL;
++    ar6000_destroy(ar->arNetDev, 1);
++}
++
++/*
++ * We need to differentiate between the surprise and planned removal of the
++ * device because of the following consideration:
++ * - In case of surprise removal, the hcd already frees up the pending
++ *   for the device and hence there is no need to unregister the function
++ *   driver inorder to get these requests. For planned removal, the function
++ *   driver has to explictly unregister itself to have the hcd return all the
++ *   pending requests before the data structures for the devices are freed up.
++ *   Note that as per the current implementation, the function driver will
++ *   end up releasing all the devices since there is no API to selectively
++ *   release a particular device.
++ * - Certain commands issued to the target can be skipped for surprise
++ *   removal since they will anyway not go through.
++ */
++static void
++ar6000_destroy(struct net_device *dev, unsigned int unregister)
++{
++    AR_SOFTC_T *ar;
++
++    AR_DEBUG_PRINTF("+ar6000_destroy \n");
++
++    if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL))
++    {
++        AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__);
++        return;
++    }
++
++    /* Clear the tx counters */
++    memset(tx_attempt, 0, sizeof(tx_attempt));
++    memset(tx_post, 0, sizeof(tx_post));
++    memset(tx_complete, 0, sizeof(tx_complete));
++
++    /* Free up the device data structure */
++    if (unregister) {
++	unregister_netdev(dev);
++    } else {
++	ar6000_close(dev);
++    ar6000_cleanup(dev);
++    }
++
++    free_raw_buffers(ar);
++
++#ifndef free_netdev
++    kfree(dev);
++#else
++    free_netdev(dev);
++#endif
++
++    AR_DEBUG_PRINTF("-ar6000_destroy \n");
++}
++
++static void ar6000_detect_error(unsigned long ptr)
++{
++    struct net_device *dev = (struct net_device *)ptr;
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (ar->arHBChallengeResp.outstanding) {
++        ar->arHBChallengeResp.missCnt++;
++    } else {
++        ar->arHBChallengeResp.missCnt = 0;
++    }
++
++    if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
++        /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
++        ar->arHBChallengeResp.missCnt = 0;
++        ar->arHBChallengeResp.seqNum = 0;
++        errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++#ifdef SEND_EVENT_TO_APP
++        ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
++                                 (A_UINT8 *)&errEvent,
++                                 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
++#endif
++        return;
++    }
++
++    /* Generate the sequence number for the next challenge */
++    ar->arHBChallengeResp.seqNum++;
++    ar->arHBChallengeResp.outstanding = TRUE;
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    /* Send the challenge on the control channel */
++    if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
++        AR_DEBUG_PRINTF("Unable to send heart beat challenge\n");
++    }
++
++
++    /* Reschedule the timer for the next challenge */
++    A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
++}
++
++void ar6000_init_profile_info(AR_SOFTC_T *ar)
++{
++    ar->arSsidLen            = 0;
++    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++    ar->arNetworkType        = INFRA_NETWORK;
++    ar->arDot11AuthMode      = OPEN_AUTH;
++    ar->arAuthMode           = NONE_AUTH;
++    ar->arPairwiseCrypto     = NONE_CRYPT;
++    ar->arPairwiseCryptoLen  = 0;
++    ar->arGroupCrypto        = NONE_CRYPT;
++    ar->arGroupCryptoLen     = 0;
++    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
++    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
++    ar->arBssChannel = 0;
++}
++
++static void
++ar6000_init_control_info(AR_SOFTC_T *ar)
++{
++    ar->arWmiEnabled         = FALSE;
++    ar6000_init_profile_info(ar);
++    ar->arDefTxKeyIndex      = 0;
++    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
++    ar->arChannelHint        = 0;
++    ar->arListenInterval     = MAX_LISTEN_INTERVAL;
++    ar->arVersion.host_ver   = AR6K_SW_VERSION;
++    ar->arRssi               = 0;
++    ar->arTxPwr              = 0;
++    ar->arTxPwrSet           = FALSE;
++    ar->arSkipScan           = 0;
++    ar->arBeaconInterval     = 0;
++    ar->arBitRate            = 0;
++    ar->arMaxRetries         = 0;
++    ar->arWmmEnabled         = TRUE;
++}
++
++static int
++ar6000_open(struct net_device *dev)
++{
++    /* Wake up the queues */
++    netif_start_queue(dev);
++
++    return 0;
++}
++
++static int
++ar6000_close(struct net_device *dev)
++{
++    /* Stop the transmit queues */ 
++    netif_stop_queue(dev); 
++    return 0; 
++}
++
++static int 
++ar6000_cleanup(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = netdev_priv(dev);
++
++    /* Stop the transmit queues */
++    netif_stop_queue(dev);
++
++    /* Disable the target and the interrupts associated with it */
++    if (ar->arWmiReady == TRUE)
++    {
++        if (!bypasswmi)
++        {
++            if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
++            {
++                AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__);
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar6000_init_profile_info(ar);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                wmi_disconnect_cmd(ar->arWmi);
++            }
++
++            ar6000_dbglog_get_debug_logs(ar);
++            ar->arWmiReady  = FALSE;
++            ar->arConnected = FALSE;
++            ar->arConnectPending = FALSE;
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++            ar->arWlanState = WLAN_ENABLED;
++#ifdef USER_KEYS
++            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++            ar->user_key_ctrl      = 0;
++#endif
++        }
++
++         AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__);
++    }
++    else
++    {
++        AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n",
++            __func__, (unsigned int) ar, (unsigned int) ar->arWmi);
++
++        /* Shut down WMI if we have started it */
++        if(ar->arWmiEnabled == TRUE)
++        {
++            AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__);
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++        }
++    }
++
++    /* stop HTC */
++    HTCStop(ar->arHtcTarget);
++
++    /* set the instance to NULL so we do not get called back on remove incase we
++     * we're explicity destroyed by module unload */
++    HTCSetInstance(ar->arHtcTarget, NULL);
++
++    if (resetok) {
++        /* try to reset the device if we can
++         * The driver may have been configure NOT to reset the target during
++         * a debug session */
++        AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n");
++        ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
++    } else {
++        AR_DEBUG_PRINTF(" Host does not want target reset. \n");
++    }
++
++       /* Done with cookies */
++    ar6000_cookie_cleanup(ar);
++
++    /* Cleanup BMI */
++    BMIInit();
++
++    return 0;
++}
++
++/* connect to a service */
++static A_STATUS ar6000_connectservice(AR_SOFTC_T               *ar,
++                                      HTC_SERVICE_CONNECT_REQ  *pConnect,
++                                      WMI_PRI_STREAM_ID        WmiStreamID,
++                                      char                     *pDesc)
++{
++    A_STATUS                 status;
++    HTC_SERVICE_CONNECT_RESP response;
++
++    do {
++
++        A_MEMZERO(&response,sizeof(response));
++
++        status = HTCConnectService(ar->arHtcTarget,
++                                   pConnect,
++                                   &response);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status);
++            break;
++        }
++
++        if (WmiStreamID == WMI_NOT_MAPPED) {
++                /* done */
++            break;
++        }
++
++            /* set endpoint mapping for the WMI stream in the driver layer */
++        arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint);
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
++{
++        /* flush all the data (non-control) streams
++         * we only flush packets that are tagged as data, we leave any control packets that
++         * were in the TX queues alone */
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_LOW_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_HIGH_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI),
++                     AR6K_DATA_PKT_TAG);
++}
++
++/* This function does one time initialization for the lifetime of the device */
++int ar6000_init(struct net_device *dev)
++{
++    AR_SOFTC_T *ar;
++    A_STATUS    status;
++    A_INT32     timeleft;
++
++    if((ar = netdev_priv(dev)) == NULL)
++    {
++        return(-EIO);
++    }
++
++    /* Do we need to finish the BMI phase */
++    if(BMIDone(ar->arHifDevice) != A_OK)
++    {
++        return -EIO;
++    }
++
++    if (!bypasswmi)
++    {
++#if 0 /* TBDXXX */
++        if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
++            A_PRINTF("WARNING: Host version 0x%x does not match Target "
++                    " version 0x%x!\n",
++                    ar->arVersion.host_ver, ar->arVersion.target_ver);
++        }
++#endif
++
++        /* Indicate that WMI is enabled (although not ready yet) */
++        ar->arWmiEnabled = TRUE;
++        if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
++        {
++            AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__);
++            return(-EIO);
++        }
++
++        AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__,
++            (unsigned int) ar->arWmi);
++    }
++
++    do {
++        HTC_SERVICE_CONNECT_REQ connect;
++
++            /* the reason we have to wait for the target here is that the driver layer
++             * has to init BMI in order to set the host block size,
++             */
++        status = HTCWaitTarget(ar->arHtcTarget);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        A_MEMZERO(&connect,sizeof(connect));
++            /* meta data is unused for now */
++        connect.pMetaData = NULL;
++        connect.MetaDataLength = 0;
++            /* these fields are the same for all service endpoints */
++        connect.EpCallbacks.pContext = ar;
++        connect.EpCallbacks.EpTxComplete = ar6000_tx_complete;
++        connect.EpCallbacks.EpRecv = ar6000_rx;
++        connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
++        connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
++        connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail;
++            /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
++             * Linux has the peculiarity of not providing flow control between the
++             * NIC and the network stack. There is no API to indicate that a TX packet
++             * was sent which could provide some back pressure to the network stack.
++             * Under linux you would have to wait till the network stack consumed all sk_buffs
++             * before any back-flow kicked in. Which isn't very friendly.
++             * So we have to manage this ourselves */
++        connect.MaxSendQueueDepth = 32;
++
++            /* connect to control service */
++        connect.ServiceID = WMI_CONTROL_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_CONTROL_PRI,
++                                       "WMI CONTROL");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* for the remaining data services set the connection flag to reduce dribbling,
++             * if configured to do so */
++        if (reduce_credit_dribble) {
++            connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
++            /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
++             * of 0-3 */
++            connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
++            connect.ConnectionFlags |=
++                        ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
++        }
++            /* connect to best-effort service */
++        connect.ServiceID = WMI_DATA_BE_SVC;
++
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_BEST_EFFORT_PRI,
++                                       "WMI DATA BE");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to back-ground
++             * map this to WMI LOW_PRI */
++        connect.ServiceID = WMI_DATA_BK_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_LOW_PRI,
++                                       "WMI DATA BK");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to Video service, map this to
++             * to HI PRI */
++        connect.ServiceID = WMI_DATA_VI_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_HIGH_PRI,
++                                       "WMI DATA VI");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to VO service, this is currently not
++             * mapped to a WMI priority stream due to historical reasons.
++             * WMI originally defined 3 priorities over 3 mailboxes
++             * We can change this when WMI is reworked so that priorities are not
++             * dependent on mailboxes */
++        connect.ServiceID = WMI_DATA_VO_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_HIGHEST_PRI,
++                                       "WMI DATA VO");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0);
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        return (-EIO);
++    }
++
++    /*
++     * give our connected endpoints some buffers
++     */
++    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI));
++
++    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI));
++
++    /*
++     * We will post the receive buffers only for SPE testing and so we are
++     * making it conditional on the 'bypasswmi' flag.
++     */
++    if (bypasswmi) {
++        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI));
++        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI));
++    }
++
++        /* setup credit distribution */
++    ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
++
++    /* Since cookies are used for HTC transports, they should be */
++    /* initialized prior to enabling HTC.                        */
++    ar6000_cookie_init(ar);
++
++    /* start HTC */
++    status = HTCStart(ar->arHtcTarget);
++
++    if (status != A_OK) {
++        if (ar->arWmiEnabled == TRUE) {
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++        }
++        ar6000_cookie_cleanup(ar);
++        return -EIO;
++    }
++
++    if (!bypasswmi) {
++        /* Wait for Wmi event to be ready */
++        timeleft = wait_event_interruptible_timeout(arEvent,
++            (ar->arWmiReady == TRUE), wmitimeout * HZ);
++
++        if(!timeleft || signal_pending(current))
++        {
++            AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n");
++#if defined(DWSIM) /* TBDXXX */
++            AR_DEBUG_PRINTF(".....but proceed anyway.\n");
++#else
++            return -EIO;
++#endif
++        }
++
++        AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__);
++
++        /* Communicate the wmi protocol verision to the target */
++        if ((ar6000_set_host_app_area(ar)) != A_OK) {
++            AR_DEBUG_PRINTF("Unable to set the host app area\n");
++        }
++    }
++
++    ar->arNumDataEndPts = 1;
++
++    return(0);
++}
++
++
++void
++ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arBitRate = rateKbps;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_ratemask_rx(void *devt, A_UINT16 ratemask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arRateMask = ratemask;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arTxPwr = txPwr;
++    wake_up(&arEvent);
++}
++
++
++void
++ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
++    ar->arNumChannels = numChan;
++
++    wake_up(&arEvent);
++}
++
++A_UINT8
++ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
++{
++    AR_SOFTC_T      *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8         *datap;
++    ATH_MAC_HDR     *macHdr;
++    A_UINT32         i, eptMap;
++
++    (*mapNo) = 0;
++    datap = A_NETBUF_DATA(skb);
++    macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
++    if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
++        return ENDPOINT_2;
++    }
++
++    eptMap = -1;
++    for (i = 0; i < ar->arNodeNum; i ++) {
++        if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
++            (*mapNo) = i + 1;
++            ar->arNodeMap[i].txPending ++;
++            return ar->arNodeMap[i].epId;
++        }
++
++        if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
++            eptMap = i;
++        }
++    }
++
++    if (eptMap == -1) {
++        eptMap = ar->arNodeNum;
++        ar->arNodeNum ++;
++        A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
++    }
++
++    A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
++
++    for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
++        if (!ar->arTxPending[i]) {
++            ar->arNodeMap[eptMap].epId = i;
++            break;
++        }
++        // No free endpoint is available, start redistribution on the inuse endpoints.
++        if (i == ENDPOINT_5) {
++            ar->arNodeMap[eptMap].epId = ar->arNexEpId;
++            ar->arNexEpId ++;
++            if (ar->arNexEpId > ENDPOINT_5) {
++                ar->arNexEpId = ENDPOINT_2;
++            }
++        }
++    }
++
++    (*mapNo) = eptMap + 1;
++    ar->arNodeMap[eptMap].txPending ++;
++
++    return ar->arNodeMap[eptMap].epId;
++}
++
++#ifdef DEBUG
++static void ar6000_dump_skb(struct sk_buff *skb)
++{
++   u_char *ch;
++   for (ch = A_NETBUF_DATA(skb);
++        (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) +
++        A_NETBUF_LEN(skb)); ch++)
++    {
++         AR_DEBUG_PRINTF("%2.2x ", *ch);
++    }
++    AR_DEBUG_PRINTF("\n");
++}
++#endif
++
++static int
++ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
++{
++    AR_SOFTC_T        *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED;
++    A_UINT32          mapNo = 0;
++    int               len;
++    struct ar_cookie *cookie;
++    A_BOOL            checkAdHocPsMapping = FALSE;
++
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
++    skb->list = NULL;
++#endif
++
++    AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n",
++                     (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb),
++                     A_NETBUF_LEN(skb));
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++     /* TCMD doesnt support any data, free the buf and return */
++    if(ar->arTargetMode == AR6000_TCMD_MODE) {
++        A_NETBUF_FREE(skb);
++        return 0;
++    }
++#endif
++    do {
++
++        if (ar->arWmiReady == FALSE && bypasswmi == 0) {
++            break;
++        }
++
++#ifdef BLOCK_TX_PATH_FLAG
++        if (blocktx) {
++            break;
++        }
++#endif /* BLOCK_TX_PATH_FLAG */
++
++        if (ar->arWmiEnabled) {
++            if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) {
++                struct sk_buff  *newbuf;
++                /*
++                 * We really should have gotten enough headroom but sometimes
++                 * we still get packets with not enough headroom.  Copy the packet.
++                 */
++                len = A_NETBUF_LEN(skb);
++                newbuf = A_NETBUF_ALLOC(len);
++                if (newbuf == NULL) {
++                    break;
++                }
++                A_NETBUF_PUT(newbuf, len);
++                A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
++                A_NETBUF_FREE(skb);
++                skb = newbuf;
++                /* fall through and assemble header */
++            }
++
++            if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
++                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n");
++                break;
++            }
++
++            if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) {
++                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n");
++                break;
++            }
++
++            if ((ar->arNetworkType == ADHOC_NETWORK) &&
++                ar->arIbssPsEnable && ar->arConnected) {
++                    /* flag to check adhoc mapping once we take the lock below: */
++                checkAdHocPsMapping = TRUE;
++
++            } else {
++                    /* get the stream mapping */
++                if (ar->arWmmEnabled) {
++                    streamID = wmi_get_stream_id(ar->arWmi,
++                                    wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI));
++                } else {
++                    streamID = WMI_BEST_EFFORT_PRI;
++                }
++            }
++
++        } else {
++            struct iphdr    *ipHdr;
++            /*
++             * the endpoint is directly based on the TOS field in the IP
++             * header **** only for testing ******
++             */
++            ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR);
++                /* here we map the TOS field to an endpoint number, this is for
++                 * the endpointping test application */
++            streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos);
++        }
++
++    } while (FALSE);
++
++        /* did we succeed ? */
++    if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) {
++            /* cleanup and exit */
++        A_NETBUF_FREE(skb);
++        AR6000_STAT_INC(ar, tx_dropped);
++        AR6000_STAT_INC(ar, tx_aborted_errors);
++        return 0;
++    }
++
++    cookie = NULL;
++
++        /* take the lock to protect driver data */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    do {
++
++        if (checkAdHocPsMapping) {
++            streamID = ar6000_ibss_map_epid(skb, dev, &mapNo);
++        }
++
++        A_ASSERT(streamID != WMI_NOT_MAPPED);
++
++            /* validate that the endpoint is connected */
++        if (arWMIStream2EndpointID(ar,streamID) == 0) {
++            AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID);
++            break;
++        }
++            /* allocate resource for this packet */
++        cookie = ar6000_alloc_cookie(ar);
++
++        if (cookie != NULL) {
++                /* update counts while the lock is held */
++            ar->arTxPending[streamID]++;
++            ar->arTotalTxDataPending++;
++        }
++
++    } while (FALSE);
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (cookie != NULL) {
++        cookie->arc_bp[0] = (A_UINT32)skb;
++        cookie->arc_bp[1] = mapNo;
++        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
++                               cookie,
++                               A_NETBUF_DATA(skb),
++                               A_NETBUF_LEN(skb),
++                               arWMIStream2EndpointID(ar,streamID),
++                               AR6K_DATA_PKT_TAG);
++
++#ifdef DEBUG
++        if (debugdriver >= 3) {
++            ar6000_dump_skb(skb);
++        }
++#endif
++            /* HTC interface is asynchronous, if this fails, cleanup will happen in
++             * the ar6000_tx_complete callback */
++        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
++    } else {
++            /* no packet to send, cleanup */
++        A_NETBUF_FREE(skb);
++        AR6000_STAT_INC(ar, tx_dropped);
++        AR6000_STAT_INC(ar, tx_aborted_errors);
++    }
++
++    return 0;
++}
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++static void
++tvsub(register struct timeval *out, register struct timeval *in)
++{
++    if((out->tv_usec -= in->tv_usec) < 0) {
++        out->tv_sec--;
++        out->tv_usec += 1000000;
++    }
++    out->tv_sec -= in->tv_sec;
++}
++
++void
++applyAPTCHeuristics(AR_SOFTC_T *ar)
++{
++    A_UINT32 duration;
++    A_UINT32 numbytes;
++    A_UINT32 throughput;
++    struct timeval ts;
++    A_STATUS status;
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
++        do_gettimeofday(&ts);
++        tvsub(&ts, &aptcTR.samplingTS);
++        duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
++        numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
++
++        if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
++            /* Initialize the time stamp and byte count */
++            aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
++            do_gettimeofday(&aptcTR.samplingTS);
++
++            /* Calculate and decide based on throughput thresholds */
++            throughput = ((numbytes * 8) / duration);
++            if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
++                /* Disable Sleep and schedule a timer */
++                A_ASSERT(ar->arWmiReady == TRUE);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
++                aptcTR.timerScheduled = TRUE;
++            }
++        }
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++static void
++ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *) Context;
++
++    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
++        if (!bypasswmi) {
++                /* under normal WMI if this is getting full, then something is running rampant
++                 * the host should not be exhausting the WMI queue with too many commands
++                 * the only exception to this is during testing using endpointping */
++
++            AR6000_SPIN_LOCK(&ar->arLock, 0);
++                /* set flag to handle subsequent messages */
++            ar->arWMIControlEpFull = TRUE;
++            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n");
++        }
++    } else {
++        /* one of the data endpoints queues is getting full..need to stop network stack
++         * the queue will resume after credits received */
++        netif_stop_queue(ar->arNetDev);
++    }
++}
++
++static void
++ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
++
++    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
++        /* FIXME: what do for it?  */
++    } else {
++        /* Wake up interface, rescheduling prevented.  */
++        if (ar->arConnected == TRUE || bypasswmi)
++            netif_wake_queue(ar->arNetDev);
++    }
++}
++
++static void
++ar6000_tx_complete(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T     *ar = (AR_SOFTC_T *)Context;
++    void           *cookie = (void *)pPacket->pPktContext;
++    struct sk_buff *skb = NULL;
++    A_UINT32        mapNo = 0;
++    A_STATUS        status;
++    struct ar_cookie * ar_cookie;
++    WMI_PRI_STREAM_ID streamID;
++    A_BOOL          wakeEvent = FALSE;
++
++    status = pPacket->Status;
++    ar_cookie = (struct ar_cookie *)cookie;
++    skb = (struct sk_buff *)ar_cookie->arc_bp[0];
++    streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
++    mapNo = ar_cookie->arc_bp[1];
++
++    A_ASSERT(skb);
++    A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb));
++
++    if (A_SUCCESS(status)) {
++        A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb));
++    }
++
++    AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ",
++                     (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
++                     pPacket->ActualLength,
++                     streamID);
++
++        /* lock the driver as we update internal state */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    ar->arTxPending[streamID]--;
++
++    if ((streamID != WMI_CONTROL_PRI) || bypasswmi) {
++        ar->arTotalTxDataPending--;
++    }
++
++    if (streamID == WMI_CONTROL_PRI)
++    {
++        if (ar->arWMIControlEpFull) {
++                /* since this packet completed, the WMI EP is no longer full */
++            ar->arWMIControlEpFull = FALSE;
++        }
++
++        if (ar->arTxPending[streamID] == 0) {
++            wakeEvent = TRUE;
++        }
++    }
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__,
++                        status);
++        AR6000_STAT_INC(ar, tx_errors);
++    } else {
++        AR_DEBUG2_PRINTF("OK\n");
++        AR6000_STAT_INC(ar, tx_packets);
++        ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb);
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++        aptcTR.bytesTransmitted += a_netbuf_to_len(skb);
++        applyAPTCHeuristics(ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++    }
++
++    // TODO this needs to be looked at
++    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
++        && (streamID != WMI_CONTROL_PRI) && mapNo)
++    {
++        mapNo --;
++        ar->arNodeMap[mapNo].txPending --;
++
++        if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
++            A_UINT32 i;
++            for (i = ar->arNodeNum; i > 0; i --) {
++                if (!ar->arNodeMap[i - 1].txPending) {
++                    A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
++                    ar->arNodeNum --;
++                } else {
++                    break;
++                }
++            }
++        }
++    }
++
++    /* Freeing a cookie should not be contingent on either of */
++    /* these flags, just if we have a cookie or not.           */
++    /* Can we even get here without a cookie? Fix later.       */
++    if (ar->arWmiReady == TRUE || (bypasswmi))
++    {
++        ar6000_free_cookie(ar, cookie);
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    /* lock is released, we can freely call other kernel APIs */
++
++        /* this indirectly frees the HTC_PACKET */
++    A_NETBUF_FREE(skb);
++
++    if (wakeEvent) {
++        wake_up(&arEvent);
++    }
++}
++
++/*
++ * Receive event handler.  This is called by HTC when a packet is received
++ */
++int pktcount;
++static void
++ar6000_rx(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
++    struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
++    int minHdrLen;
++    A_STATUS        status = pPacket->Status;
++    WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
++    HTC_ENDPOINT_ID   ept = pPacket->Endpoint;
++
++    A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
++
++    AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ",
++                    (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
++                    pPacket->ActualLength);
++    if (status != A_OK) {
++        AR_DEBUG2_PRINTF("ERR\n");
++    } else {
++        AR_DEBUG2_PRINTF("OK\n");
++    }
++
++        /* take lock to protect buffer counts
++         * and adaptive power throughput state */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    ar->arRxBuffers[streamID]--;
++
++    if (A_SUCCESS(status)) {
++        AR6000_STAT_INC(ar, rx_packets);
++        ar->arNetStats.rx_bytes += pPacket->ActualLength;
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++        aptcTR.bytesReceived += a_netbuf_to_len(skb);
++        applyAPTCHeuristics(ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++        A_NETBUF_PUT(skb, pPacket->ActualLength +  HTC_HEADER_LEN);
++        A_NETBUF_PULL(skb, HTC_HEADER_LEN);
++
++#ifdef DEBUG
++        if (debugdriver >= 2) {
++            ar6000_dump_skb(skb);
++        }
++#endif /* DEBUG */
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (status != A_OK) {
++        AR6000_STAT_INC(ar, rx_errors);
++        A_NETBUF_FREE(skb);
++    } else if (ar->arWmiEnabled == TRUE) {
++        if (streamID == WMI_CONTROL_PRI) {
++           /*
++            * this is a wmi control msg
++            */
++            wmi_control_rx(ar->arWmi, skb);
++        } else {
++            WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
++            if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) {
++                /*
++                 * this is a wmi control msg
++                 */
++                /* strip off WMI hdr */
++                wmi_data_hdr_remove(ar->arWmi, skb);
++                wmi_control_rx(ar->arWmi, skb);
++            } else {
++                /*
++                 * this is a wmi data packet
++                 */
++                minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
++                            sizeof(ATH_LLC_SNAP_HDR);
++
++                if ((pPacket->ActualLength < minHdrLen) ||
++                    (pPacket->ActualLength > AR6000_BUFFER_SIZE))
++                {
++                    /*
++                     * packet is too short or too long
++                     */
++                    AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n");
++                    AR6000_STAT_INC(ar, rx_errors);
++                    AR6000_STAT_INC(ar, rx_length_errors);
++                    A_NETBUF_FREE(skb);
++                } else {
++                    if (ar->arWmmEnabled) {
++                        wmi_implicit_create_pstream(ar->arWmi, skb,
++                            DNLINK_TRAFFIC, UNDEFINED_PRI);
++                    }
++#if 0
++                    /* Access RSSI values here */
++                    AR_DEBUG_PRINTF("RSSI %d\n",
++                        ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi);
++#endif
++                    wmi_data_hdr_remove(ar->arWmi, skb);
++                    wmi_dot3_2_dix(ar->arWmi, skb);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++                    /*
++                     * extra push and memcpy, for eth_type_trans() of 2.4 kernel
++                     * will pull out hard_header_len bytes of the skb.
++                     */
++                    A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN);
++                    A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) +
++                             sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR));
++#endif
++                    if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
++                    {
++                        skb->dev = ar->arNetDev;
++                        skb->protocol = eth_type_trans(skb, ar->arNetDev);
++                        netif_rx(skb);
++                    }
++                    else
++                    {
++                        A_NETBUF_FREE(skb);
++                    }
++                }
++            }
++        }
++    } else {
++        if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
++        {
++            skb->dev = ar->arNetDev;
++            skb->protocol = eth_type_trans(skb, ar->arNetDev);
++            netif_rx(skb);
++        }
++        else
++        {
++            A_NETBUF_FREE(skb);
++        }
++    }
++
++    if (status != A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        ar6000_rx_refill(Context, ept);
++    }
++
++
++}
++
++static void
++ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T  *ar = (AR_SOFTC_T *)Context;
++    void        *osBuf;
++    int         RxBuffers;
++    int         buffersToRefill;
++    HTC_PACKET  *pPacket;
++    WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint);
++
++    buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
++                                    (int)ar->arRxBuffers[streamId];
++
++    if (buffersToRefill <= 0) {
++            /* fast return, nothing to fill */
++        return;
++    }
++
++    AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
++                    buffersToRefill, Endpoint);
++
++    for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
++        osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
++        if (NULL == osBuf) {
++            break;
++        }
++            /* the HTC packet wrapper is at the head of the reserved area
++             * in the skb */
++        pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
++            /* set re-fill info */
++        SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
++            /* add this packet */
++        HTCAddReceivePkt(ar->arHtcTarget, pPacket);
++    }
++
++        /* update count */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++    ar->arRxBuffers[streamId] += RxBuffers;
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++
++static struct net_device_stats *
++ar6000_get_stats(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    return &ar->arNetStats;
++}
++
++static struct iw_statistics *
++ar6000_get_iwstats(struct net_device * dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    struct iw_statistics * pIwStats = &ar->arIwStats;
++
++    if ((ar->arWmiReady == FALSE)
++    /*
++     * The in_atomic function is used to determine if the scheduling is
++     * allowed in the current context or not. This was introduced in 2.6
++     * From what I have read on the differences between 2.4 and 2.6, the
++     * 2.4 kernel did not support preemption and so this check might not
++     * be required for 2.4 kernels.
++     */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        || (in_atomic())
++#endif
++       )
++    {
++        pIwStats->status = 0;
++        pIwStats->qual.qual = 0;
++        pIwStats->qual.level =0;
++        pIwStats->qual.noise = 0;
++        pIwStats->discard.code =0;
++        pIwStats->discard.retries=0;
++        pIwStats->miss.beacon =0;
++        return pIwStats;
++    }
++    if (down_interruptible(&ar->arSem)) {
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++
++
++    ar->statsUpdatePending = TRUE;
++
++    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n");
++        up(&ar->arSem);
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++    pIwStats->status = 1 ;
++    pIwStats->qual.qual = pStats->cs_aveBeacon_rssi;
++    pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161;  /* noise is -95 dBm */
++    pIwStats->qual.noise = pStats->noise_floor_calibation;
++    pIwStats->discard.code = pStats->rx_decrypt_err;
++    pIwStats->discard.retries = pStats->tx_retry_cnt;
++    pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
++    up(&ar->arSem);
++    return pIwStats;
++}
++
++void
++ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++    struct net_device *dev = ar->arNetDev;
++
++    ar->arWmiReady = TRUE;
++    wake_up(&arEvent);
++    A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
++    AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
++        dev->dev_addr[0], dev->dev_addr[1],
++        dev->dev_addr[2], dev->dev_addr[3],
++        dev->dev_addr[4], dev->dev_addr[5]);
++
++    ar->arPhyCapability = phyCap;
++}
++
++A_UINT8
++ar6000_iptos_to_userPriority(A_UINT8 *pkt)
++{
++    struct iphdr *ipHdr = (struct iphdr *)pkt;
++    A_UINT8 userPriority;
++
++    /*
++     * IP Tos format :
++     *      (Refer Pg 57 WMM-test-plan-v1.2)
++     * IP-TOS - 8bits
++     *          : DSCP(6-bits) ECN(2-bits)
++     *          : DSCP - P2 P1 P0 X X X
++     *              where (P2 P1 P0) form 802.1D
++     */
++    userPriority = ipHdr->tos >> 5;
++    return (userPriority & 0x7);
++}
++
++void
++ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
++                     A_UINT16 listenInterval, A_UINT16 beaconInterval,
++                     NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
++                     A_UINT8 assocReqLen, A_UINT8 assocRespLen,
++                     A_UINT8 *assocInfo)
++{
++    union iwreq_data wrqu;
++    int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
++    static const char *tag1 = "ASSOCINFO(ReqIEs=";
++    static const char *tag2 = "ASSOCRESPIE=";
++    static const char *beaconIetag = "BEACONIE=";
++    char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)];
++    char *pos;
++    A_UINT8 key_op_ctrl;
++
++    A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
++    ar->arBssChannel = channel;
++
++    A_PRINTF("AR6000 connected event on freq %d ", channel);
++    A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
++            " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
++            " assocRespLen =%d\n",
++             bssid[0], bssid[1], bssid[2],
++             bssid[3], bssid[4], bssid[5],
++             listenInterval, beaconInterval,
++             beaconIeLen, assocReqLen, assocRespLen);
++    if (networkType & ADHOC_NETWORK) {
++        if (networkType & ADHOC_CREATOR) {
++            A_PRINTF("Network: Adhoc (Creator)\n");
++        } else {
++            A_PRINTF("Network: Adhoc (Joiner)\n");
++        }
++    } else {
++        A_PRINTF("Network: Infrastructure\n");
++    }
++
++    if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
++        AR_DEBUG_PRINTF("\nBeaconIEs= ");
++
++        beacon_ie_pos = 0;
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", beaconIetag);
++        pos = buf + 9;
++        for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++    if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
++    {
++        assoc_resp_ie_pos = beaconIeLen + assocReqLen +
++                            sizeof(A_UINT16)  +  /* capinfo*/
++                            sizeof(A_UINT16)  +  /* status Code */
++                            sizeof(A_UINT16)  ;  /* associd */
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", tag2);
++        pos = buf + 12;
++        AR_DEBUG_PRINTF("\nAssocRespIEs= ");
++        /*
++         * The Association Response Frame w.o. the WLAN header is delivered to
++         * the host, so skip over to the IEs
++         */
++        for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
++        {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++    if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
++        /*
++         * assoc Request includes capability and listen interval. Skip these.
++         */
++        assoc_req_ie_pos =  beaconIeLen +
++                            sizeof(A_UINT16)  +  /* capinfo*/
++                            sizeof(A_UINT16);    /* listen interval */
++
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", tag1);
++        pos = buf + 17;
++        AR_DEBUG_PRINTF("AssocReqIEs= ");
++        for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++#ifdef USER_KEYS
++    if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
++        ar->user_saved_keys.keyOk == TRUE)
++    {
++
++        key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
++        if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
++            key_op_ctrl &= ~KEY_OP_INIT_RSC;
++        } else {
++            key_op_ctrl |= KEY_OP_INIT_RSC;
++        }
++        ar6000_reinstall_keys(ar, key_op_ctrl);
++    }
++#endif /* USER_KEYS */
++
++        /* flush data queues */
++    ar6000_TxDataCleanup(ar);
++
++    netif_start_queue(ar->arNetDev);
++
++    if ((OPEN_AUTH == ar->arDot11AuthMode) &&
++        (NONE_AUTH == ar->arAuthMode)      &&
++        (WEP_CRYPT == ar->arPairwiseCrypto))
++    {
++        if (!ar->arConnected) {
++            ar6000_install_static_wep_keys(ar);
++        }
++    }
++
++    ar->arConnected  = TRUE;
++    ar->arConnectPending = FALSE;
++
++    reconnect_flag = 0;
++
++    A_MEMZERO(&wrqu, sizeof(wrqu));
++    A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
++    wrqu.addr.sa_family = ARPHRD_ETHER;
++    wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
++    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
++        A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
++        ar->arNodeNum = 0;
++        ar->arNexEpId = ENDPOINT_2;
++    }
++
++}
++
++void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
++{
++    A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
++    ar->arNumDataEndPts = num;
++}
++
++void
++ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
++                        A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
++{
++    A_UINT8 i;
++
++    A_PRINTF("AR6000 disconnected");
++    if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
++        A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
++                 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
++    }
++    A_PRINTF("\n");
++
++    AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason);
++    AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus);
++    AR_DEBUG_PRINTF("\nAssocResp Frame = %s",
++                    assocRespLen ? " " : "NULL");
++    for (i = 0; i < assocRespLen; i++) {
++        if (!(i % 0x10)) {
++            AR_DEBUG_PRINTF("\n");
++        }
++        AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++    }
++    AR_DEBUG_PRINTF("\n");
++    /*
++     * If the event is due to disconnect cmd from the host, only they the target
++     * would stop trying to connect. Under any other condition, target would
++     * keep trying to connect.
++     *
++     */
++    if( reason == DISCONNECT_CMD)
++    {
++        ar->arConnectPending = FALSE;
++    } else {
++        ar->arConnectPending = TRUE;
++        if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
++            ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
++            ar->arConnected = TRUE;
++            return;
++        }
++    }
++    ar->arConnected = FALSE;
++
++    if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
++        reconnect_flag = 0;
++    }
++
++#ifdef USER_KEYS
++    if (reason != CSERV_DISCONNECT)
++    {
++        ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++        ar->user_key_ctrl      = 0;
++    }
++#endif /* USER_KEYS */
++
++    netif_stop_queue(ar->arNetDev);
++    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
++    ar->arBssChannel = 0;
++    ar->arBeaconInterval = 0;
++
++    ar6000_TxDataCleanup(ar);
++}
++
++void
++ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
++{
++    A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
++    ar->arRegCode = regCode;
++}
++
++void
++ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
++{
++    static const char *tag = "PRE-AUTH";
++    char buf[128];
++    union iwreq_data wrqu;
++    int i;
++
++    AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n");
++    for (i=0; i < numAps; info++, i++) {
++        AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
++            info->bssid[0], info->bssid[1], info->bssid[2],
++            info->bssid[3], info->bssid[4], info->bssid[5]);
++        if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
++            AR_DEBUG_PRINTF("preauth-cap");
++        }
++        if (info->bssFlags & WMI_PMKID_VALID_BSS) {
++            AR_DEBUG_PRINTF(" pmkid-valid\n");
++            continue;           /* we skip bss if the pmkid is already valid */
++        }
++        AR_DEBUG_PRINTF("\n");
++        snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
++                 tag,
++                 info->bssid[0], info->bssid[1], info->bssid[2],
++                 info->bssid[3], info->bssid[4], info->bssid[5],
++                 i, info->bssFlags);
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++}
++
++void
++ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
++{
++    static const char *tag = "MLME-MICHAELMICFAILURE.indication";
++    char buf[128];
++    union iwreq_data wrqu;
++
++    A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
++             keyid, ismcast ? "multi": "uni");
++    snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid,
++             ismcast ? "multi" : "uni");
++    memset(&wrqu, 0, sizeof(wrqu));
++    wrqu.data.length = strlen(buf);
++    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++}
++
++void
++ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
++{
++	AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status);
++
++	ar->scan_complete = 1;
++	wake_up_interruptible(&ar6000_scan_queue);
++}
++
++void
++ar6000_targetStats_event(AR_SOFTC_T *ar,  WMI_TARGET_STATS *pTarget)
++{
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    A_UINT8 ac;
++
++    /*A_PRINTF("AR6000 updating target stats\n");*/
++    pStats->tx_packets          += pTarget->txrxStats.tx_stats.tx_packets;
++    pStats->tx_bytes            += pTarget->txrxStats.tx_stats.tx_bytes;
++    pStats->tx_unicast_pkts     += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
++    pStats->tx_unicast_bytes    += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
++    pStats->tx_multicast_pkts   += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
++    pStats->tx_multicast_bytes  += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
++    pStats->tx_broadcast_pkts   += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
++    pStats->tx_broadcast_bytes  += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
++    pStats->tx_rts_success_cnt  += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
++    for(ac = 0; ac < WMM_NUM_AC; ac++)
++        pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
++    pStats->tx_errors           += pTarget->txrxStats.tx_stats.tx_errors;
++    pStats->tx_failed_cnt       += pTarget->txrxStats.tx_stats.tx_failed_cnt;
++    pStats->tx_retry_cnt        += pTarget->txrxStats.tx_stats.tx_retry_cnt;
++    pStats->tx_rts_fail_cnt     += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
++    pStats->tx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
++
++    pStats->rx_packets          += pTarget->txrxStats.rx_stats.rx_packets;
++    pStats->rx_bytes            += pTarget->txrxStats.rx_stats.rx_bytes;
++    pStats->rx_unicast_pkts     += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
++    pStats->rx_unicast_bytes    += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
++    pStats->rx_multicast_pkts   += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
++    pStats->rx_multicast_bytes  += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
++    pStats->rx_broadcast_pkts   += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
++    pStats->rx_broadcast_bytes  += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
++    pStats->rx_fragment_pkt     += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
++    pStats->rx_errors           += pTarget->txrxStats.rx_stats.rx_errors;
++    pStats->rx_crcerr           += pTarget->txrxStats.rx_stats.rx_crcerr;
++    pStats->rx_key_cache_miss   += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
++    pStats->rx_decrypt_err      += pTarget->txrxStats.rx_stats.rx_decrypt_err;
++    pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
++    pStats->rx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
++
++
++    pStats->tkip_local_mic_failure
++                                += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
++    pStats->tkip_counter_measures_invoked
++                                += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
++    pStats->tkip_replays        += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
++    pStats->tkip_format_errors  += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
++    pStats->ccmp_format_errors  += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
++    pStats->ccmp_replays        += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
++
++
++    pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
++    pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
++
++    pStats->cs_bmiss_cnt        += pTarget->cservStats.cs_bmiss_cnt;
++    pStats->cs_lowRssi_cnt      += pTarget->cservStats.cs_lowRssi_cnt;
++    pStats->cs_connect_cnt      += pTarget->cservStats.cs_connect_cnt;
++    pStats->cs_disconnect_cnt   += pTarget->cservStats.cs_disconnect_cnt;
++    pStats->cs_aveBeacon_snr    = pTarget->cservStats.cs_aveBeacon_snr;
++    pStats->cs_aveBeacon_rssi   = pTarget->cservStats.cs_aveBeacon_rssi;
++    pStats->cs_lastRoam_msec    = pTarget->cservStats.cs_lastRoam_msec;
++    pStats->cs_snr              = pTarget->cservStats.cs_snr;
++    pStats->cs_rssi             = pTarget->cservStats.cs_rssi;
++
++    pStats->lq_val              = pTarget->lqVal;
++
++    pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
++    pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
++    pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
++    pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
++
++    ar->statsUpdatePending = FALSE;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_rssiThreshold_event(AR_SOFTC_T *ar,  WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
++{
++    USER_RSSI_THOLD userRssiThold;
++
++    userRssiThold.tag = rssi_map[newThreshold].tag;
++    userRssiThold.rssi = rssi;
++    AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d  rssi = %d\n", newThreshold, userRssiThold.tag, rssi);
++#ifdef SEND_EVENT_TO_APP
++    ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
++#endif
++}
++
++
++void
++ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
++{
++    if (source == APP_HB_CHALLENGE) {
++        /* Report it to the app in case it wants a positive acknowledgement */
++#ifdef SEND_EVENT_TO_APP
++        ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
++                                 (A_UINT8 *)&cookie, sizeof(cookie));
++#endif
++    } else {
++        /* This would ignore the replys that come in after their due time */
++        if (cookie == ar->arHBChallengeResp.seqNum) {
++            ar->arHBChallengeResp.outstanding = FALSE;
++        }
++    }
++}
++
++
++void
++ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
++{
++    char    *errString[] = {
++                [WMI_TARGET_PM_ERR_FAIL]    "WMI_TARGET_PM_ERR_FAIL",
++                [WMI_TARGET_KEY_NOT_FOUND]  "WMI_TARGET_KEY_NOT_FOUND",
++                [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
++                [WMI_TARGET_BMISS]          "WMI_TARGET_BMISS",
++                [WMI_PSDISABLE_NODE_JOIN]   "WMI_PSDISABLE_NODE_JOIN"
++                };
++
++    A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
++
++    /* One error is reported at a time, and errorval is a bitmask */
++    if(errorVal & (errorVal - 1))
++       return;
++
++    A_PRINTF("AR6000 Error type = ");
++    switch(errorVal)
++    {
++        case WMI_TARGET_PM_ERR_FAIL:
++        case WMI_TARGET_KEY_NOT_FOUND:
++        case WMI_TARGET_DECRYPTION_ERR:
++        case WMI_TARGET_BMISS:
++        case WMI_PSDISABLE_NODE_JOIN:
++            A_PRINTF("%s\n", errString[errorVal]);
++            break;
++        default:
++            A_PRINTF("INVALID\n");
++            break;
++    }
++
++}
++
++
++void
++ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
++                 A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
++{
++    WMM_TSPEC_IE    *tspecIe;
++
++    /*
++     * This is the TSPEC IE suggestion from AP.
++     * Suggestion provided by AP under some error
++     * cases, could be helpful for the host app.
++     * Check documentation.
++     */
++    tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
++
++    /*
++     * What do we do, if we get TSPEC rejection? One thought
++     * that comes to mind is implictly delete the pstream...
++     */
++    A_PRINTF("AR6000 CAC notification. "
++                "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
++                 ac, cacIndication, statusCode);
++}
++
++#define AR6000_PRINT_BSSID(_pBss)  do {     \
++        A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
++                 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
++                 (_pBss)[4],(_pBss)[5]);  \
++} while(0)
++
++void
++ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
++{
++    A_UINT8 i;
++
++    A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
++              pTbl->numEntries, pTbl->roamMode);
++    for (i= 0; i < pTbl->numEntries; i++) {
++        A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
++            pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
++            pTbl->bssRoamInfo[i].bssid[2],
++            pTbl->bssRoamInfo[i].bssid[3],
++            pTbl->bssRoamInfo[i].bssid[4],
++            pTbl->bssRoamInfo[i].bssid[5]);
++        A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
++                 " BIAS %d\n",
++            pTbl->bssRoamInfo[i].rssi,
++            pTbl->bssRoamInfo[i].rssidt,
++            pTbl->bssRoamInfo[i].last_rssi,
++            pTbl->bssRoamInfo[i].util,
++            pTbl->bssRoamInfo[i].roam_util,
++            pTbl->bssRoamInfo[i].bias);
++    }
++}
++
++void
++ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
++{
++    A_UINT8 i,j;
++
++    /*Each event now contains exactly one filter, see bug 26613*/
++    A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num,                 wow_reply->num_filters);
++    A_PRINTF("wow mode = %s host mode = %s\n",
++            (wow_reply->wow_mode == 0? "disabled":"enabled"),
++            (wow_reply->host_mode == 1 ? "awake":"asleep"));
++
++
++    /*If there are no patterns, the reply will only contain generic
++      WoW information. Pattern information will exist only if there are
++      patterns present. Bug 26716*/
++
++   /* If this event contains pattern information, display it*/
++    if (wow_reply->this_filter_num) {
++        i=0;
++        A_PRINTF("id=%d size=%d offset=%d\n",
++                    wow_reply->wow_filters[i].wow_filter_id,
++                    wow_reply->wow_filters[i].wow_filter_size,
++                    wow_reply->wow_filters[i].wow_filter_offset);
++       A_PRINTF("wow pattern = ");
++       for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
++             A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
++        }
++
++        A_PRINTF("\nwow mask = ");
++        for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
++            A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
++        }
++        A_PRINTF("\n");
++    }
++}
++
++/*
++ * Report the Roaming related data collected on the target
++ */
++void
++ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
++{
++    A_PRINTF("Disconnect Data : BSSID: ");
++    AR6000_PRINT_BSSID(p->disassoc_bssid);
++    A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
++             p->disassoc_bss_rssi,p->disassoc_time,
++             p->no_txrx_time);
++    A_PRINTF("Connect Data: BSSID: ");
++    AR6000_PRINT_BSSID(p->assoc_bssid);
++    A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
++             p->assoc_bss_rssi,p->assoc_time,
++             p->allow_txrx_time);
++    A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\
++             "First Data Tx Time (after Assoc) %d\n",
++             p->last_data_txrx_time, p->first_data_txrx_time);
++}
++
++void
++ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
++{
++    switch (p->roamDataType) {
++        case ROAM_DATA_TIME:
++            ar6000_display_roam_time(&p->u.roamTime);
++            break;
++        default:
++            break;
++    }
++}
++
++void
++ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
++{
++    struct sk_buff *skb;
++    WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
++
++
++    if (!ar->arMgmtFilter) {
++        return;
++    }
++    if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
++        (bih->frameType != BEACON_FTYPE))  ||
++        ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
++        (bih->frameType != PROBERESP_FTYPE)))
++    {
++        return;
++    }
++
++    if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
++
++        A_NETBUF_PUT(skb, len);
++        A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
++        skb->dev = ar->arNetDev;
++	printk("MAC RAW...\n");
++//        skb->mac.raw = A_NETBUF_DATA(skb);
++        skb->ip_summed = CHECKSUM_NONE;
++        skb->pkt_type = PACKET_OTHERHOST;
++        skb->protocol = __constant_htons(0x0019);
++        netif_rx(skb);
++    }
++}
++
++A_UINT32 wmiSendCmdNum;
++
++A_STATUS
++ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID)
++{
++    AR_SOFTC_T       *ar = (AR_SOFTC_T *)devt;
++    A_STATUS         status = A_OK;
++    struct ar_cookie *cookie = NULL;
++    int i;
++
++        /* take lock to protect ar6000_alloc_cookie() */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    do {
++
++        AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n",
++                         (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID);
++
++        if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) {
++                /* control endpoint is full, don't allocate resources, we
++                 * are just going to drop this packet */
++            cookie = NULL;
++            AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n",
++                    (A_UINT32)osbuf, A_NETBUF_LEN(osbuf));
++        } else {
++            cookie = ar6000_alloc_cookie(ar);
++        }
++
++        if (cookie == NULL) {
++            status = A_NO_MEMORY;
++            break;
++        }
++
++        if(logWmiRawMsgs) {
++            A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
++            for(i = 0; i < a_netbuf_to_len(osbuf); i++)
++                A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
++            A_PRINTF("\n");
++        }
++
++        wmiSendCmdNum++;
++
++    } while (FALSE);
++
++    if (cookie != NULL) {
++            /* got a structure to send it out on */
++        ar->arTxPending[streamID]++;
++
++        if (streamID != WMI_CONTROL_PRI) {
++            ar->arTotalTxDataPending++;
++        }
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (cookie != NULL) {
++        cookie->arc_bp[0] = (A_UINT32)osbuf;
++        cookie->arc_bp[1] = 0;
++        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
++                               cookie,
++                               A_NETBUF_DATA(osbuf),
++                               A_NETBUF_LEN(osbuf),
++                               arWMIStream2EndpointID(ar,streamID),
++                               AR6K_CONTROL_PKT_TAG);
++            /* this interface is asynchronous, if there is an error, cleanup will happen in the
++             * TX completion callback */
++        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
++        status = A_OK;
++    }
++
++    return status;
++}
++
++/* indicate tx activity or inactivity on a WMI stream */
++void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
++{
++    AR_SOFTC_T  *ar = (AR_SOFTC_T *)devt;
++    WMI_PRI_STREAM_ID streamid;
++
++    if (ar->arWmiEnabled) {
++        streamid = wmi_get_stream_id(ar->arWmi, TrafficClass);
++    } else {
++            /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
++             * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */
++        streamid = (WMI_PRI_STREAM_ID)TrafficClass;
++    }
++
++        /* notify HTC, this may cause credit distribution changes */
++
++    HTCIndicateActivityChange(ar->arHtcTarget,
++                              arWMIStream2EndpointID(ar,streamid),
++                              Active);
++
++}
++
++module_init(ar6000_init_module);
++module_exit(ar6000_cleanup_module);
++
++/* Init cookie queue */
++static void
++ar6000_cookie_init(AR_SOFTC_T *ar)
++{
++    A_UINT32    i;
++
++    ar->arCookieList = NULL;
++    A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
++
++    for (i = 0; i < MAX_COOKIE_NUM; i++) {
++        ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
++    }
++}
++
++/* cleanup cookie queue */
++static void
++ar6000_cookie_cleanup(AR_SOFTC_T *ar)
++{
++    /* It is gone .... */
++    ar->arCookieList = NULL;
++}
++
++/* Init cookie queue */
++static void
++ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
++{
++    /* Insert first */
++    A_ASSERT(ar != NULL);
++    A_ASSERT(cookie != NULL);
++    cookie->arc_list_next = ar->arCookieList;
++    ar->arCookieList = cookie;
++}
++
++/* cleanup cookie queue */
++static struct ar_cookie *
++ar6000_alloc_cookie(AR_SOFTC_T  *ar)
++{
++    struct ar_cookie   *cookie;
++
++    cookie = ar->arCookieList;
++    if(cookie != NULL)
++    {
++        ar->arCookieList = cookie->arc_list_next;
++    }
++
++    return cookie;
++}
++
++#ifdef SEND_EVENT_TO_APP
++/*
++ * This function is used to send event which come from taget to
++ * the application. The buf which send to application is include
++ * the event ID and event content.
++ */
++#define EVENT_ID_LEN   2
++void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
++                              A_UINT8 *datap, int len)
++{
++
++#if (WIRELESS_EXT >= 15)
++
++/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
++
++    char *buf;
++    A_UINT16 size;
++    union iwreq_data wrqu;
++
++    size = len + EVENT_ID_LEN;
++
++    if (size > IW_CUSTOM_MAX) {
++        AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
++                eventId, size, IW_CUSTOM_MAX);
++        return;
++    }
++
++    buf = A_MALLOC_NOWAIT(size);
++    A_MEMZERO(buf, size);
++    A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
++    A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
++
++    //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size);
++    A_MEMZERO(&wrqu, sizeof(wrqu));
++    wrqu.data.length = size;
++    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++
++    A_FREE(buf);
++#endif
++
++
++}
++#endif
++
++
++void
++ar6000_tx_retry_err_event(void *devt)
++{
++    AR_DEBUG2_PRINTF("Tx retries reach maximum!\n");
++}
++
++void
++ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
++{
++    AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr);
++}
++
++void
++ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
++{
++    AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq);
++}
++
++
++
++A_UINT32
++a_copy_to_user(void *to, const void *from, A_UINT32 n)
++{
++    return(copy_to_user(to, from, n));
++}
++
++A_UINT32
++a_copy_from_user(void *to, const void *from, A_UINT32 n)
++{
++    return(copy_from_user(to, from, n));
++}
++
++
++A_STATUS
++ar6000_get_driver_cfg(struct net_device *dev,
++                        A_UINT16 cfgParam,
++                        void *result)
++{
++
++    A_STATUS    ret = 0;
++
++    switch(cfgParam)
++    {
++        case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
++           *((A_UINT32 *)result) = wlanNodeCaching;
++           break;
++        case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
++           *((A_UINT32 *)result) = logWmiRawMsgs;
++            break;
++        default:
++           ret = EINVAL;
++           break;
++    }
++
++    return ret;
++}
++
++void
++ar6000_keepalive_rx(void *devt, A_UINT8 configured)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arKeepaliveConfigured = configured;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList)
++{
++    A_UINT8 i, j;
++
++    A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
++
++    for (i = 0; i < numPMKID; i++) {
++        A_PRINTF("\nPMKID %d ", i);
++            for (j = 0; j < WMI_PMKID_LEN; j++) {
++                A_PRINTF("%2.2x", pmkidList->pmkid[j]);
++            }
++        pmkidList++;
++    }
++}
++
++#ifdef USER_KEYS
++static A_STATUS
++
++ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
++{
++    A_STATUS status = A_OK;
++    struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
++    struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
++    CRYPTO_TYPE  keyType = ar->user_saved_keys.keyType;
++
++    if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            goto _reinstall_keys_out;
++        }
++
++        if (uik->ik_keylen) {
++            status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
++                    ar->user_saved_keys.keyType, PAIRWISE_USAGE,
++                    uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
++                    uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG);
++        }
++
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
++    }
++
++    if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            goto _reinstall_keys_out;
++        }
++
++        if (bik->ik_keylen) {
++            status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
++                    ar->user_saved_keys.keyType, GROUP_USAGE,
++                    bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
++                    bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG);
++        }
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
++    }
++
++_reinstall_keys_out:
++    ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++    ar->user_key_ctrl      = 0;
++
++    return status;
++}
++#endif /* USER_KEYS */
++
++
++void
++ar6000_dset_open_req(
++    void *context,
++    A_UINT32 id,
++    A_UINT32 targHandle,
++    A_UINT32 targReplyFn,
++    A_UINT32 targReplyArg)
++{
++}
++
++void
++ar6000_dset_close(
++    void *context,
++    A_UINT32 access_cookie)
++{
++    return;
++}
++
++void
++ar6000_dset_data_req(
++   void *context,
++   A_UINT32 accessCookie,
++   A_UINT32 offset,
++   A_UINT32 length,
++   A_UINT32 targBuf,
++   A_UINT32 targReplyFn,
++   A_UINT32 targReplyArg)
++{
++}
+diff --git a/drivers/ar6000/ar6000/ar6000_drv.h b/drivers/ar6000/ar6000/ar6000_drv.h
+new file mode 100644
+index 0000000..3230d32
+--- /dev/null
++++ b/drivers/ar6000/ar6000/ar6000_drv.h
+@@ -0,0 +1,361 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _AR6000_H_
++#define _AR6000_H_
++
++#include <linux/version.h>
++
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/skbuff.h>
++#include <linux/if_ether.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <net/iw_handler.h>
++#include <linux/if_arp.h>
++#include <linux/ip.h>
++#include <linux/semaphore.h>
++#include <linux/wireless.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <asm/io.h>
++
++#include <a_config.h>
++#include <athdefs.h>
++#include "a_types.h"
++#include "a_osapi.h"
++#include "htc_api.h"
++#include "wmi.h"
++#include "a_drv.h"
++#include "bmi.h"
++#include <ieee80211.h>
++#include <ieee80211_ioctl.h>
++#include <wlan_api.h>
++#include <wmi_api.h>
++#include "gpio_api.h"
++#include "gpio.h"
++#include <host_version.h>
++#include <linux/rtnetlink.h>
++#include <linux/init.h>
++#include <linux/moduleparam.h>
++#include "AR6Khwreg.h"
++#include "ar6000_api.h"
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++#include <testcmd.h>
++#endif
++
++#include "targaddrs.h"
++#include "dbglog_api.h"
++#include "ar6000_diag.h"
++#include "common_drv.h"
++
++#ifndef  __dev_put
++#define  __dev_put(dev) dev_put(dev)
++#endif
++
++#ifdef USER_KEYS
++
++#define USER_SAVEDKEYS_STAT_INIT     0
++#define USER_SAVEDKEYS_STAT_RUN      1
++
++// TODO this needs to move into the AR_SOFTC struct
++struct USER_SAVEDKEYS {
++    struct ieee80211req_key   ucast_ik;
++    struct ieee80211req_key   bcast_ik;
++    CRYPTO_TYPE               keyType;
++    A_BOOL                    keyOk;
++};
++#endif
++
++#define DBG_INFO		0x00000001
++#define DBG_ERROR		0x00000002
++#define DBG_WARNING		0x00000004
++#define DBG_SDIO		0x00000008
++#define DBG_HIF			0x00000010
++#define DBG_HTC			0x00000020
++#define DBG_WMI			0x00000040
++#define DBG_WMI2		0x00000080
++#define DBG_DRIVER		0x00000100
++
++#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
++
++
++#ifdef DEBUG
++#define AR_DEBUG_PRINTF(args...)        if (debugdriver) A_PRINTF(args);
++#define AR_DEBUG2_PRINTF(args...)        if (debugdriver >= 2) A_PRINTF(args);
++extern int debugdriver;
++#else
++#define AR_DEBUG_PRINTF(args...)
++#define AR_DEBUG2_PRINTF(args...)
++#endif
++
++A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define	MAX_AR6000                        1
++#define AR6000_MAX_RX_BUFFERS             16
++#define AR6000_BUFFER_SIZE                1664
++#define AR6000_TX_TIMEOUT                 10
++#define	AR6000_ETH_ADDR_LEN               6
++#define	AR6000_MAX_ENDPOINTS              4
++#define MAX_NODE_NUM                      15
++#define MAX_COOKIE_NUM                    150
++#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT        1
++#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT  1
++
++enum {
++    DRV_HB_CHALLENGE = 0,
++    APP_HB_CHALLENGE
++};
++
++/* HTC RAW streams */
++typedef enum _HTC_RAW_STREAM_ID {
++    HTC_RAW_STREAM_NOT_MAPPED = -1,
++    HTC_RAW_STREAM_0 = 0,
++    HTC_RAW_STREAM_1 = 1,
++    HTC_RAW_STREAM_2 = 2,
++    HTC_RAW_STREAM_3 = 3,
++    HTC_RAW_STREAM_NUM_MAX
++} HTC_RAW_STREAM_ID;
++
++#define RAW_HTC_READ_BUFFERS_NUM    4
++#define RAW_HTC_WRITE_BUFFERS_NUM   4
++
++typedef struct {
++    int currPtr;
++    int length;
++    unsigned char data[AR6000_BUFFER_SIZE];
++    HTC_PACKET    HTCPacket;
++} raw_htc_buffer;
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/*
++ *  add TCMD_MODE besides wmi and bypasswmi
++ *  in TCMD_MODE, only few TCMD releated wmi commands
++ *  counld be hanlder
++ */
++enum {
++    AR6000_WMI_MODE = 0,
++    AR6000_BYPASS_MODE,
++    AR6000_TCMD_MODE,
++    AR6000_WLAN_MODE
++};
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++struct ar_wep_key {
++    A_UINT8                 arKeyIndex;
++    A_UINT8                 arKeyLen;
++    A_UINT8                 arKey[64];
++} ;
++
++struct ar_node_mapping {
++    A_UINT8                 macAddress[6];
++    A_UINT8                 epId;
++    A_UINT8                 txPending;
++};
++
++struct ar_cookie {
++    A_UINT32               arc_bp[2];    /* Must be first field */
++    HTC_PACKET             HtcPkt;       /* HTC packet wrapper */
++    struct ar_cookie *arc_list_next;
++};
++
++struct ar_hb_chlng_resp {
++    A_TIMER                 timer;
++    A_UINT32                frequency;
++    A_UINT32                seqNum;
++    A_BOOL                  outstanding;
++    A_UINT8                 missCnt;
++    A_UINT8                 missThres;
++};
++
++typedef struct ar6_softc {
++    struct net_device       *arNetDev;    /* net_device pointer */
++    void                    *arWmi;
++    int                     arTxPending[WMI_PRI_MAX_COUNT];
++    int                     arTotalTxDataPending;
++    A_UINT8                 arNumDataEndPts;
++    A_BOOL                  arWmiEnabled;
++    A_BOOL                  arWmiReady;
++    A_BOOL                  arConnected;
++    A_BOOL                  arRadioSwitch;
++    HTC_HANDLE              arHtcTarget;
++    void                    *arHifDevice;
++    spinlock_t              arLock;
++    struct semaphore        arSem;
++    int                     arRxBuffers[WMI_PRI_MAX_COUNT];
++    int                     arSsidLen;
++    u_char                  arSsid[32];
++    A_UINT8                 arNetworkType;
++    A_UINT8                 arDot11AuthMode;
++    A_UINT8                 arAuthMode;
++    A_UINT8                 arPairwiseCrypto;
++    A_UINT8                 arPairwiseCryptoLen;
++    A_UINT8                 arGroupCrypto;
++    A_UINT8                 arGroupCryptoLen;
++    A_UINT8                 arDefTxKeyIndex;
++    struct ar_wep_key       arWepKeyList[WMI_MAX_KEY_INDEX + 1];
++    A_UINT8                 arBssid[6];
++    A_UINT8                 arReqBssid[6];
++    A_UINT16                arChannelHint;
++    A_UINT16                arBssChannel;
++    A_UINT16                arListenInterval;
++    struct ar6000_version   arVersion;
++    A_UINT32                arTargetType;
++    A_INT8                  arRssi;
++    A_UINT8                 arTxPwr;
++    A_BOOL                  arTxPwrSet;
++    A_INT32                 arBitRate;
++    struct net_device_stats arNetStats;
++    struct iw_statistics 	arIwStats;
++    A_INT8                  arNumChannels;
++    A_UINT16                arChannelList[32];
++    A_UINT32                arRegCode;
++    A_BOOL                  statsUpdatePending;
++    TARGET_STATS            arTargetStats;
++    A_INT8                  arMaxRetries;
++    A_UINT8                 arPhyCapability;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    A_UINT8                 tcmdRxReport;
++    A_UINT32                tcmdRxTotalPkt;
++    A_INT32                 tcmdRxRssi;
++    A_UINT32                tcmdPm;
++   A_UINT32                 arTargetMode;
++#endif
++    AR6000_WLAN_STATE       arWlanState;
++    struct ar_node_mapping  arNodeMap[MAX_NODE_NUM];
++    A_UINT8                 arIbssPsEnable;
++    A_UINT8                 arNodeNum;
++    A_UINT8                 arNexEpId;
++    struct ar_cookie        *arCookieList;
++    A_UINT16                arRateMask;
++    A_UINT8                 arSkipScan;
++    A_UINT16                arBeaconInterval;
++    A_BOOL                  arConnectPending;
++    A_BOOL                  arWmmEnabled;
++    struct ar_hb_chlng_resp arHBChallengeResp;
++    A_UINT8                 arKeepaliveConfigured;
++    A_UINT32                arMgmtFilter;
++    HTC_ENDPOINT_ID         arWmi2EpMapping[WMI_PRI_MAX_COUNT];
++    WMI_PRI_STREAM_ID       arEp2WmiMapping[ENDPOINT_MAX];
++#ifdef HTC_RAW_INTERFACE
++    HTC_ENDPOINT_ID         arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX];
++    HTC_RAW_STREAM_ID       arEp2RawMapping[ENDPOINT_MAX];
++    struct semaphore        raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX];
++    struct semaphore        raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX];
++    wait_queue_head_t       raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX];
++    wait_queue_head_t       raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX];
++    raw_htc_buffer          *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM];
++    raw_htc_buffer          *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM];
++    A_BOOL                  write_buffer_available[HTC_RAW_STREAM_NUM_MAX];
++    A_BOOL                  read_buffer_available[HTC_RAW_STREAM_NUM_MAX];
++#endif
++    A_BOOL                  arRawIfInit;
++    int                     arDeviceIndex;
++    COMMON_CREDIT_STATE_INFO arCreditStateInfo;
++    A_BOOL                  arWMIControlEpFull;
++    A_BOOL                  dbgLogFetchInProgress;
++    A_UCHAR                 log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE];
++    A_UINT32                log_cnt;
++    A_UINT32                dbglog_init_done;
++    A_UINT32                arConnectCtrlFlags;
++	A_UINT32                scan_complete;
++#ifdef USER_KEYS
++    A_INT32                 user_savedkeys_stat;
++    A_UINT32                user_key_ctrl;
++    struct USER_SAVEDKEYS   user_saved_keys;
++#endif
++} AR_SOFTC_T;
++
++
++#define arWMIStream2EndpointID(ar,wmi)          (ar)->arWmi2EpMapping[(wmi)]
++#define arSetWMIStream2EndpointIDMap(ar,wmi,ep)  \
++{  (ar)->arWmi2EpMapping[(wmi)] = (ep); \
++   (ar)->arEp2WmiMapping[(ep)] = (wmi); }
++#define arEndpoint2WMIStreamID(ar,ep)           (ar)->arEp2WmiMapping[(ep)]
++
++#define arRawIfEnabled(ar) (ar)->arRawIfInit
++#define arRawStream2EndpointID(ar,raw)          (ar)->arRaw2EpMapping[(raw)]
++#define arSetRawStream2EndpointIDMap(ar,raw,ep)  \
++{  (ar)->arRaw2EpMapping[(raw)] = (ep); \
++   (ar)->arEp2RawMapping[(ep)] = (raw); }
++#define arEndpoint2RawStreamID(ar,ep)           (ar)->arEp2RawMapping[(ep)]
++
++struct ar_giwscan_param {
++    char    *current_ev;
++    char    *end_buf;
++    A_BOOL  firstPass;
++};
++
++#define AR6000_STAT_INC(ar, stat)       (ar->arNetStats.stat++)
++
++#define AR6000_SPIN_LOCK(lock, param)   do {                            \
++    if (irqs_disabled()) {                                              \
++        AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n");                 \
++    }                                                                   \
++    spin_lock_bh(lock);                                                 \
++} while (0)
++
++#define AR6000_SPIN_UNLOCK(lock, param) do {                            \
++    if (irqs_disabled()) {                                              \
++        AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n");              \
++    }                                                                   \
++    spin_unlock_bh(lock);                                               \
++} while (0)
++
++int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd);
++void ar6000_ioctl_iwsetup(struct iw_handler_def *def);
++void ar6000_gpio_init(void);
++void ar6000_init_profile_info(AR_SOFTC_T *ar);
++void ar6000_install_static_wep_keys(AR_SOFTC_T *ar);
++int ar6000_init(struct net_device *dev);
++int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar);
++A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar);
++
++#ifdef HTC_RAW_INTERFACE
++
++#ifndef __user
++#define __user
++#endif
++
++int ar6000_htc_raw_open(AR_SOFTC_T *ar);
++int ar6000_htc_raw_close(AR_SOFTC_T *ar);
++ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar,
++                            HTC_RAW_STREAM_ID StreamID,
++                            char __user *buffer, size_t count);
++ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar,
++                             HTC_RAW_STREAM_ID StreamID,
++                             char __user *buffer, size_t count);
++
++#endif /* HTC_RAW_INTERFACE */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _AR6000_H_ */
+diff --git a/drivers/ar6000/ar6000/ar6000_raw_if.c b/drivers/ar6000/ar6000/ar6000_raw_if.c
+new file mode 100644
+index 0000000..c0d9f8e
+--- /dev/null
++++ b/drivers/ar6000/ar6000/ar6000_raw_if.c
+@@ -0,0 +1,440 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++#ifdef HTC_RAW_INTERFACE
++
++static void
++ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T        *ar = (AR_SOFTC_T *)Context;
++    raw_htc_buffer    *busy;
++    HTC_RAW_STREAM_ID streamID;
++
++    busy = (raw_htc_buffer *)pPacket->pPktContext;
++    A_ASSERT(busy != NULL);
++
++    if (pPacket->Status == A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        return;
++    }
++
++    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
++    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
++
++#ifdef CF
++   if (down_trylock(&ar->raw_htc_read_sem[streamID])) {
++#else
++    if (down_interruptible(&ar->raw_htc_read_sem[streamID])) {
++#endif /* CF */
++        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
++    }
++
++    A_ASSERT((pPacket->Status != A_OK) ||
++             (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN)));
++
++    busy->length = pPacket->ActualLength + HTC_HEADER_LEN;
++    busy->currPtr = HTC_HEADER_LEN;
++    ar->read_buffer_available[streamID] = TRUE;
++    //AR_DEBUG_PRINTF("raw read cb:  0x%X 0x%X \n", busy->currPtr,busy->length);
++    up(&ar->raw_htc_read_sem[streamID]);
++
++    /* Signal the waiting process */
++    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID);
++    wake_up_interruptible(&ar->raw_htc_read_queue[streamID]);
++}
++
++static void
++ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T          *ar = (AR_SOFTC_T  *)Context;
++    raw_htc_buffer      *free;
++    HTC_RAW_STREAM_ID   streamID;
++
++    free = (raw_htc_buffer *)pPacket->pPktContext;
++    A_ASSERT(free != NULL);
++
++    if (pPacket->Status == A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        return;
++    }
++
++    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
++    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
++
++#ifdef CF
++    if (down_trylock(&ar->raw_htc_write_sem[streamID])) {
++#else
++    if (down_interruptible(&ar->raw_htc_write_sem[streamID])) {
++#endif
++        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
++    }
++
++    A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN));
++
++    free->length = 0;
++    ar->write_buffer_available[streamID] = TRUE;
++    up(&ar->raw_htc_write_sem[streamID]);
++
++    /* Signal the waiting process */
++    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID);
++    wake_up_interruptible(&ar->raw_htc_write_queue[streamID]);
++}
++
++/* connect to a service */
++static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T        *ar,
++                                           HTC_RAW_STREAM_ID StreamID)
++{
++    A_STATUS                 status;
++    HTC_SERVICE_CONNECT_RESP response;
++    A_UINT8                  streamNo;
++    HTC_SERVICE_CONNECT_REQ  connect;
++
++    do {
++
++        A_MEMZERO(&connect,sizeof(connect));
++            /* pass the stream ID as meta data to the RAW streams service */
++        streamNo = (A_UINT8)StreamID;
++        connect.pMetaData = &streamNo;
++        connect.MetaDataLength = sizeof(A_UINT8);
++            /* these fields are the same for all endpoints */
++        connect.EpCallbacks.pContext = ar;
++        connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb;
++        connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb;
++            /* simple interface, we don't need these optional callbacks */
++        connect.EpCallbacks.EpRecvRefill = NULL;
++        connect.EpCallbacks.EpSendFull = NULL;
++        connect.EpCallbacks.EpSendAvail = NULL;
++        connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM;
++
++            /* connect to the raw streams service, we may be able to get 1 or more
++             * connections, depending on WHAT is running on the target */
++        connect.ServiceID = HTC_RAW_STREAMS_SVC;
++
++        A_MEMZERO(&response,sizeof(response));
++
++            /* try to connect to the raw stream, it is okay if this fails with
++             * status HTC_SERVICE_NO_MORE_EP */
++        status = HTCConnectService(ar->arHtcTarget,
++                                   &connect,
++                                   &response);
++
++        if (A_FAILED(status)) {
++            if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) {
++                AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n");
++                status = A_OK;
++            }
++            break;
++        }
++
++            /* set endpoint mapping for the RAW HTC streams */
++        arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint);
++
++        AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n",
++                        StreamID, arRawStream2EndpointID(ar,StreamID));
++
++    } while (FALSE);
++
++    return status;
++}
++
++int ar6000_htc_raw_open(AR_SOFTC_T *ar)
++{
++    A_STATUS status;
++    int streamID, endPt, count2;
++    raw_htc_buffer *buffer;
++    HTC_SERVICE_ID servicepriority;
++
++    A_ASSERT(ar->arHtcTarget != NULL);
++
++        /* wait for target */
++    status = HTCWaitTarget(ar->arHtcTarget);
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status);
++        return -ENODEV;
++    }
++
++    for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) {
++        ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED;
++    }
++
++    for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) {
++        /* Initialize the data structures */
++        sema_init(&ar->raw_htc_read_sem[streamID], 1);
++        sema_init(&ar->raw_htc_write_sem[streamID], 1);
++        init_waitqueue_head(&ar->raw_htc_read_queue[streamID]);
++        init_waitqueue_head(&ar->raw_htc_write_queue[streamID]);
++
++            /* try to connect to the raw service */
++        status = ar6000_connect_raw_service(ar,streamID);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (arRawStream2EndpointID(ar,streamID) == 0) {
++            break;
++        }
++
++        for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) {
++            /* Initialize the receive buffers */
++            buffer = ar->raw_htc_write_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++            buffer = ar->raw_htc_read_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++
++            SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket,
++                                          buffer,
++                                          buffer->data,
++                                          AR6000_BUFFER_SIZE,
++                                          arRawStream2EndpointID(ar,streamID));
++
++            /* Queue buffers to HTC for receive */
++            if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK)
++            {
++                BMIInit();
++                return -EIO;
++            }
++        }
++
++        for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) {
++            /* Initialize the receive buffers */
++            buffer = ar->raw_htc_write_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++        }
++
++        ar->read_buffer_available[streamID] = FALSE;
++        ar->write_buffer_available[streamID] = TRUE;
++    }
++
++    if (A_FAILED(status)) {
++        return -EIO;
++    }
++
++    AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID);
++
++    servicepriority = HTC_RAW_STREAMS_SVC;  /* only 1 */
++
++        /* set callbacks and priority list */
++    HTCSetCreditDistribution(ar->arHtcTarget,
++                             ar,
++                             NULL,  /* use default */
++                             NULL,  /* use default */
++                             &servicepriority,
++                             1);
++
++    /* Start the HTC component */
++    if ((status = HTCStart(ar->arHtcTarget)) != A_OK) {
++        BMIInit();
++        return -EIO;
++    }
++
++    (ar)->arRawIfInit = TRUE;
++
++    return 0;
++}
++
++int ar6000_htc_raw_close(AR_SOFTC_T *ar)
++{
++    A_PRINTF("ar6000_htc_raw_close called \n");
++    HTCStop(ar->arHtcTarget);
++
++        /* reset the device */
++    ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
++    /* Initialize the BMI component */
++    BMIInit();
++
++    return 0;
++}
++
++raw_htc_buffer *
++get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID)
++{
++    int count;
++    raw_htc_buffer *busy;
++
++    /* Check for data */
++    for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) {
++        busy = ar->raw_htc_read_buffer[StreamID][count];
++        if (busy->length) {
++            break;
++        }
++    }
++    if (busy->length) {
++        ar->read_buffer_available[StreamID] = TRUE;
++    } else {
++        ar->read_buffer_available[StreamID] = FALSE;
++    }
++
++    return busy;
++}
++
++ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
++                            char __user *buffer, size_t length)
++{
++    int readPtr;
++    raw_htc_buffer *busy;
++
++    if (arRawStream2EndpointID(ar,StreamID) == 0) {
++        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
++        return -EFAULT;
++    }
++
++    if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
++        return -ERESTARTSYS;
++    }
++
++    busy = get_filled_buffer(ar,StreamID);
++    while (!ar->read_buffer_available[StreamID]) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++
++        /* Wait for the data */
++        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID);
++        if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID],
++                                     ar->read_buffer_available[StreamID]))
++        {
++            return -EINTR;
++        }
++        if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
++            return -ERESTARTSYS;
++        }
++        busy = get_filled_buffer(ar,StreamID);
++    }
++
++    /* Read the data */
++    readPtr = busy->currPtr;
++    if (length > busy->length - HTC_HEADER_LEN) {
++        length = busy->length - HTC_HEADER_LEN;
++    }
++    if (copy_to_user(buffer, &busy->data[readPtr], length)) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++        return -EFAULT;
++    }
++
++    busy->currPtr += length;
++
++    //AR_DEBUG_PRINTF("raw read ioctl:  currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length);
++
++    if (busy->currPtr == busy->length)
++    {
++        busy->currPtr = 0;
++        busy->length = 0;
++        HTC_PACKET_RESET_RX(&busy->HTCPacket);
++        //AR_DEBUG_PRINTF("raw read ioctl:  ep for packet:%d \n", busy->HTCPacket.Endpoint);
++        HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket);
++    }
++    ar->read_buffer_available[StreamID] = FALSE;
++    up(&ar->raw_htc_read_sem[StreamID]);
++
++    return length;
++}
++
++static raw_htc_buffer *
++get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID)
++{
++    int count;
++    raw_htc_buffer *free;
++
++    free = NULL;
++    for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) {
++        free = ar->raw_htc_write_buffer[StreamID][count];
++        if (free->length == 0) {
++            break;
++        }
++    }
++    if (!free->length) {
++        ar->write_buffer_available[StreamID] = TRUE;
++    } else {
++        ar->write_buffer_available[StreamID] = FALSE;
++    }
++
++    return free;
++}
++
++ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
++                     char __user *buffer, size_t length)
++{
++    int writePtr;
++    raw_htc_buffer *free;
++
++    if (arRawStream2EndpointID(ar,StreamID) == 0) {
++        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
++        return -EFAULT;
++    }
++
++    if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
++        return -ERESTARTSYS;
++    }
++
++    /* Search for a free buffer */
++    free = get_free_buffer(ar,StreamID);
++
++    /* Check if there is space to write else wait */
++    while (!ar->write_buffer_available[StreamID]) {
++        up(&ar->raw_htc_write_sem[StreamID]);
++
++        /* Wait for buffer to become free */
++        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID);
++        if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID],
++                                     ar->write_buffer_available[StreamID]))
++        {
++            return -EINTR;
++        }
++        if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
++            return -ERESTARTSYS;
++        }
++        free = get_free_buffer(ar,StreamID);
++    }
++
++    /* Send the data */
++    writePtr = HTC_HEADER_LEN;
++    if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) {
++        length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN;
++    }
++
++    if (copy_from_user(&free->data[writePtr], buffer, length)) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++        return -EFAULT;
++    }
++
++    free->length = length;
++
++    SET_HTC_PACKET_INFO_TX(&free->HTCPacket,
++                           free,
++                           &free->data[writePtr],
++                           length,
++                           arRawStream2EndpointID(ar,StreamID),
++                           AR6K_DATA_PKT_TAG);
++
++    HTCSendPkt(ar->arHtcTarget,&free->HTCPacket);
++
++    ar->write_buffer_available[StreamID] = FALSE;
++    up(&ar->raw_htc_write_sem[StreamID]);
++
++    return length;
++}
++#endif /* HTC_RAW_INTERFACE */
+diff --git a/drivers/ar6000/ar6000/ar6xapi_linux.h b/drivers/ar6000/ar6000/ar6xapi_linux.h
+new file mode 100644
+index 0000000..b8e6e09
+--- /dev/null
++++ b/drivers/ar6000/ar6000/ar6xapi_linux.h
+@@ -0,0 +1,128 @@
++#ifndef _AR6XAPI_LINUX_H
++#define _AR6XAPI_LINUX_H
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct ar6_softc;
++
++void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap);
++A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt);
++A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID);
++void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel,
++                          A_UINT8 *bssid, A_UINT16 listenInterval,
++                          A_UINT16 beaconInterval, NETWORK_TYPE networkType,
++                          A_UINT8 beaconIeLen, A_UINT8 assocReqLen,
++                          A_UINT8 assocRespLen,A_UINT8 *assocInfo);
++void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason,
++                             A_UINT8 *bssid, A_UINT8 assocRespLen,
++                             A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus);
++void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid,
++                              A_BOOL ismcast);
++void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps);
++void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList);
++void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode);
++void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr);
++void ar6000_keepalive_rx(void *devt, A_UINT8 configured);
++void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps,
++                                 WMI_NEIGHBOR_INFO *info);
++void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num);
++void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status);
++void ar6000_targetStats_event(struct ar6_softc *ar,  WMI_TARGET_STATS *pStats);
++void ar6000_rssiThreshold_event(struct ar6_softc *ar,
++                                WMI_RSSI_THRESHOLD_VAL newThreshold,
++                                A_INT16 rssi);
++void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal);
++void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication,
++                                A_UINT8 statusCode, A_UINT8 *tspecSuggestion);
++void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source);
++void
++ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl);
++
++void
++ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p);
++
++void
++ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters,
++                      WMI_GET_WOW_LIST_REPLY *wow_reply);
++
++void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID,
++                             WMI_PMKID *pmkidList);
++
++void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
++void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
++void ar6000_gpio_ack_rx(void);
++
++void ar6000_dbglog_init_done(struct ar6_softc *ar);
++
++#ifdef SEND_EVENT_TO_APP
++void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len);
++#endif
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len);
++#endif
++
++void ar6000_tx_retry_err_event(void *devt);
++
++void ar6000_snrThresholdEvent_rx(void *devt,
++                                 WMI_SNR_THRESHOLD_VAL newThreshold,
++                                 A_UINT8 snr);
++
++void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal);
++
++
++void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask);
++
++A_STATUS ar6000_get_driver_cfg(struct net_device *dev,
++                                A_UINT16 cfgParam,
++                                void *result);
++void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len);
++
++void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped,
++                         A_INT8 *buffer, A_UINT32 length);
++
++int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar);
++
++void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active);
++
++void ar6000_dset_open_req(void *devt,
++                          A_UINT32 id,
++                          A_UINT32 targ_handle,
++                          A_UINT32 targ_reply_fn,
++                          A_UINT32 targ_reply_arg);
++void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
++void ar6000_dset_data_req(void *devt,
++                          A_UINT32 access_cookie,
++                          A_UINT32 offset,
++                          A_UINT32 length,
++                          A_UINT32 targ_buf,
++                          A_UINT32 targ_reply_fn,
++                          A_UINT32 targ_reply_arg);
++
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/drivers/ar6000/ar6000/athdrv_linux.h b/drivers/ar6000/ar6000/athdrv_linux.h
+new file mode 100644
+index 0000000..9c3e449
+--- /dev/null
++++ b/drivers/ar6000/ar6000/athdrv_linux.h
+@@ -0,0 +1,993 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHDRV_LINUX_H
++#define _ATHDRV_LINUX_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++
++/*
++ * There are two types of ioctl's here: Standard ioctls and
++ * eXtended ioctls.  All extended ioctls (XIOCTL) are multiplexed
++ * off of the single ioctl command, AR6000_IOCTL_EXTENDED.  The
++ * arguments for every XIOCTL starts with a 32-bit command word
++ * that is used to select which extended ioctl is in use.  After
++ * the command word are command-specific arguments.
++ */
++
++/* Linux standard Wireless Extensions, private ioctl interfaces */
++#define IEEE80211_IOCTL_SETPARAM             (SIOCIWFIRSTPRIV+0)
++#define IEEE80211_IOCTL_GETPARAM             (SIOCIWFIRSTPRIV+1)
++#define IEEE80211_IOCTL_SETKEY               (SIOCIWFIRSTPRIV+2)
++#define IEEE80211_IOCTL_SETWMMPARAMS         (SIOCIWFIRSTPRIV+3)
++#define IEEE80211_IOCTL_DELKEY               (SIOCIWFIRSTPRIV+4)
++#define IEEE80211_IOCTL_GETWMMPARAMS         (SIOCIWFIRSTPRIV+5)
++#define IEEE80211_IOCTL_SETOPTIE             (SIOCIWFIRSTPRIV+6)
++#define IEEE80211_IOCTL_SETMLME              (SIOCIWFIRSTPRIV+7)
++//#define IEEE80211_IOCTL_GETOPTIE             (SIOCIWFIRSTPRIV+7)
++#define IEEE80211_IOCTL_ADDPMKID             (SIOCIWFIRSTPRIV+8)
++//#define IEEE80211_IOCTL_SETAUTHALG           (SIOCIWFIRSTPRIV+10)
++#define IEEE80211_IOCTL_LASTONE              (SIOCIWFIRSTPRIV+9)
++
++
++
++/*                      ====WMI Ioctls====                                    */
++/*
++ *
++ * Many ioctls simply provide WMI services to application code:
++ * an application makes such an ioctl call with a set of arguments
++ * that are packaged into the corresponding WMI message, and sent
++ * to the Target.
++ */
++
++#define AR6000_IOCTL_WMI_GETREV              (SIOCIWFIRSTPRIV+10)
++/*
++ * arguments:
++ *   ar6000_version *revision
++ */
++
++#define AR6000_IOCTL_WMI_SETPWR              (SIOCIWFIRSTPRIV+11)
++/*
++ * arguments:
++ *   WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
++ * uses: WMI_SET_POWER_MODE_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETSCAN             (SIOCIWFIRSTPRIV+12)
++/*
++ * arguments:
++ *   WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
++ * uses: WMI_SET_SCAN_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETLISTENINT        (SIOCIWFIRSTPRIV+13)
++/*
++ * arguments:
++ *   UINT32 listenInterval
++ * uses: WMI_SET_LISTEN_INT_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETBSSFILTER        (SIOCIWFIRSTPRIV+14)
++/*
++ * arguments:
++ *   WMI_BSS_FILTER filter (see include/wmi.h)
++ * uses: WMI_SET_BSS_FILTER_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS   (SIOCIWFIRSTPRIV+16)
++/*
++ * arguments:
++ *   WMI_CHANNEL_PARAMS_CMD chParams
++ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_PROBEDSSID      (SIOCIWFIRSTPRIV+17)
++/*
++ * arguments:
++ *   WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
++ * uses: WMI_SETPROBED_SSID_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_PMPARAMS        (SIOCIWFIRSTPRIV+18)
++/*
++ * arguments:
++ *   WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
++ * uses: WMI_SET_POWER_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_BADAP           (SIOCIWFIRSTPRIV+19)
++/*
++ * arguments:
++ *   WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
++ * uses: WMI_ADD_BAD_AP_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_GET_QOS_QUEUE       (SIOCIWFIRSTPRIV+20)
++/*
++ * arguments:
++ *   ar6000_queuereq queueRequest (see below)
++ */
++
++#define AR6000_IOCTL_WMI_CREATE_QOS          (SIOCIWFIRSTPRIV+21)
++/*
++ * arguments:
++ *   WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
++ * uses: WMI_CREATE_PSTREAM_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_DELETE_QOS          (SIOCIWFIRSTPRIV+22)
++/*
++ * arguments:
++ *   WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
++ * uses: WMI_DELETE_PSTREAM_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD   (SIOCIWFIRSTPRIV+23)
++/*
++ * arguments:
++ *   WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
++/*
++ * arguments:
++ *   WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
++ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_GET_TARGET_STATS    (SIOCIWFIRSTPRIV+25)
++/*
++ * arguments:
++ *   TARGET_STATS *targetStats (see below)
++ * uses: WMI_GET_STATISTICS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ASSOC_INFO      (SIOCIWFIRSTPRIV+26)
++/*
++ * arguments:
++ *   WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
++ * uses: WMI_SET_ASSOC_INFO_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS   (SIOCIWFIRSTPRIV+27)
++/*
++ * arguments:
++ *   WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
++ * uses: WMI_SET_ACCESS_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_BMISS_TIME      (SIOCIWFIRSTPRIV+28)
++/*
++ * arguments:
++ *   UINT32 beaconMissTime
++ * uses: WMI_SET_BMISS_TIME_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT    (SIOCIWFIRSTPRIV+29)
++/*
++ * arguments:
++ *   WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
++ * uses: WMI_SET_DISC_TIMEOUT_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS    (SIOCIWFIRSTPRIV+30)
++/*
++ * arguments:
++ *   WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
++ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
++ */
++
++/*
++ * There is a very small space available for driver-private
++ * wireless ioctls.  In order to circumvent this limitation,
++ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
++ * single AR6000_IOCTL_EXTENDED ioctl.
++ */
++#define AR6000_IOCTL_EXTENDED                (SIOCIWFIRSTPRIV+31)
++
++
++/*                         ====BMI Extended Ioctls====                        */
++
++#define AR6000_XIOCTL_BMI_DONE                                  1
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
++ * uses: BMI_DONE
++ */
++
++#define AR6000_XIOCTL_BMI_READ_MEMORY                           2
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
++ *       UINT32 address
++ *       UINT32 length
++ *     }
++ *     char results[length]
++ *   }
++ * uses: BMI_READ_MEMORY
++ */
++
++#define AR6000_XIOCTL_BMI_WRITE_MEMORY                          3
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
++ *   UINT32 address
++ *   UINT32 length
++ *   char data[length]
++ * uses: BMI_WRITE_MEMORY
++ */
++
++#define AR6000_XIOCTL_BMI_EXECUTE                               4
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
++ *   UINT32 TargetAddress
++ *   UINT32 parameter
++ * uses: BMI_EXECUTE
++ */
++
++#define AR6000_XIOCTL_BMI_SET_APP_START                         5
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
++ *   UINT32 TargetAddress
++ * uses: BMI_SET_APP_START
++ */
++
++#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER                     6
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
++ *       UINT32 TargetAddress, 32-bit aligned
++ *     }
++ *     UINT32 result
++ *   }
++ * uses: BMI_READ_SOC_REGISTER
++ */
++
++#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER                    7
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
++ *       UINT32 TargetAddress, 32-bit aligned
++ *       UINT32 newValue
++ *     }
++ * uses: BMI_WRITE_SOC_REGISTER
++ */
++
++#define AR6000_XIOCTL_BMI_TEST                                  8
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
++ *   UINT32 address
++ *   UINT32 length
++ *   UINT32 count
++ */
++
++
++
++/* Historical Host-side DataSet support */
++#define AR6000_XIOCTL_UNUSED9                                   9
++#define AR6000_XIOCTL_UNUSED10                                  10
++#define AR6000_XIOCTL_UNUSED11                                  11
++
++/*                      ====Misc Extended Ioctls====                          */
++
++#define AR6000_XIOCTL_FORCE_TARGET_RESET                        12
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
++ */
++
++
++#ifdef HTC_RAW_INTERFACE
++/* HTC Raw Interface Ioctls */
++#define AR6000_XIOCTL_HTC_RAW_OPEN                              13
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_CLOSE                             14
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_READ                              15
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
++ *       UINT32 mailboxID
++ *       UINT32 length
++ *     }
++ *     results[length]
++ *   }
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_WRITE                             16
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
++ *   UINT32 mailboxID
++ *   UINT32 length
++ *   char buffer[length]
++ */
++#endif /* HTC_RAW_INTERFACE */
++
++#define AR6000_XIOCTL_CHECK_TARGET_READY                        17
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
++ */
++
++
++
++/*                ====GPIO (General Purpose I/O) Extended Ioctls====          */
++
++#define AR6000_XIOCTL_GPIO_OUTPUT_SET                           18
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
++ *   ar6000_gpio_output_set_cmd_s (see below)
++ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INPUT_GET                            19
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
++ * uses: WMIX_GPIO_INPUT_GET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_REGISTER_SET                         20
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
++ *   ar6000_gpio_register_cmd_s (see below)
++ * uses: WMIX_GPIO_REGISTER_SET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_REGISTER_GET                         21
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
++ *   ar6000_gpio_register_cmd_s (see below)
++ * uses: WMIX_GPIO_REGISTER_GET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INTR_ACK                             22
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
++ *   ar6000_cpio_intr_ack_cmd_s (see below)
++ * uses: WMIX_GPIO_INTR_ACK_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INTR_WAIT                            23
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
++ */
++
++
++
++/*                    ====more wireless commands====                          */
++
++#define AR6000_XIOCTL_SET_ADHOC_BSSID                           24
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
++ *   WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
++ */
++
++#define AR6000_XIOCTL_SET_OPT_MODE                              25
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
++ *   WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
++ * uses: WMI_SET_OPT_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_OPT_SEND_FRAME                            26
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
++ *   WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
++ * uses: WMI_OPT_TX_FRAME_CMDID
++ */
++
++#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL                   27
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
++ *   WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
++ * uses: WMI_SET_BEACON_INT_CMDID
++ */
++
++
++#define IEEE80211_IOCTL_SETAUTHALG                              28
++
++
++#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE                        29
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
++ *   WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
++ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
++ */
++
++
++#define AR6000_XIOCTL_SET_MAX_SP                                30
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
++ *   WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
++ * uses: WMI_SET_MAX_SP_LEN_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_GET_ROAM_TBL                          31
++
++#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL                         32
++
++#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS                 33
++
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
++ *   WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
++ *   WMI_SET_POWERSAVE_TIMERS_CMDID
++ */
++
++#define AR6000_XIOCTRL_WMI_GET_POWER_MODE                        34
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
++ */
++
++#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE                       35
++typedef enum {
++    WLAN_DISABLED,
++    WLAN_ENABLED
++} AR6000_WLAN_STATE;
++/*
++ * arguments:
++ * enable/disable
++ */
++
++#define AR6000_XIOCTL_WMI_GET_ROAM_DATA                         36
++
++#define AR6000_XIOCTL_WMI_SETRETRYLIMITS                37
++/*
++ * arguments:
++ *   WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
++ * uses: WMI_SET_RETRY_LIMITS_CMDID
++ */
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/*       ====extended commands for radio test ====                          */
++
++#define AR6000_XIOCTL_TCMD_CONT_TX                      38
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
++ *   WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
++ * uses: WMI_TCMD_CONT_TX_CMDID
++ */
++
++#define AR6000_XIOCTL_TCMD_CONT_RX                      39
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
++ *   WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
++ * uses: WMI_TCMD_CONT_RX_CMDID
++ */
++
++#define AR6000_XIOCTL_TCMD_PM                           40
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
++ *   WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
++ * uses: WMI_TCMD_PM_CMDID
++ */
++
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++#define AR6000_XIOCTL_WMI_STARTSCAN                     41
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
++ *   UINT8  scanType
++ *   UINT8  scanConnected
++ *   A_BOOL forceFgScan
++ * uses: WMI_START_SCAN_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SETFIXRATES                   42
++
++#define AR6000_XIOCTL_WMI_GETFIXRATES                   43
++
++
++#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD             44
++/*
++ * arguments:
++ *   WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_CLR_RSSISNR                   45
++/*
++ * arguments:
++ *   WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_CLR_RSSISNR_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD               46
++/*
++ * arguments:
++ *   WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_RTS                        47
++/*
++ * arguments:
++ *   WMI_SET_RTS_MODE_CMD (see include/wmi.h)
++ * uses: WMI_SET_RTS_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_LPREAMBLE                 48
++
++#define AR6000_XIOCTL_WMI_SET_AUTHMODE                  49
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
++ *   UINT8  mode
++ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_REASSOCMODE               50
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
++ *   UINT8  mode
++ * uses: WMI_SET_WMM_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_WMM                       51
++
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
++ * UINT32 frequency
++ * UINT8  threshold
++ */
++#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS  52
++
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
++ * UINT32 cookie
++ */
++#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP         53
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
++ *   UINT32 regDomain
++ */
++#define AR6000_XIOCTL_WMI_GET_RD                        54
++
++#define AR6000_XIOCTL_DIAG_READ                         55
++
++#define AR6000_XIOCTL_DIAG_WRITE                        56
++
++/*
++ * arguments cmd (AR6000_XIOCTL_SET_TXOP)
++ * WMI_TXOP_CFG  txopEnable
++ */
++#define AR6000_XIOCTL_WMI_SET_TXOP                      57
++
++#ifdef USER_KEYS
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
++ * UINT32 keyOpCtrl
++ * uses AR6000_USER_SETKEYS_INFO
++ */
++#define AR6000_XIOCTL_USER_SETKEYS                      58
++#endif /* USER_KEYS */
++
++#define AR6000_XIOCTL_WMI_SET_KEEPALIVE                 59
++/*
++ * arguments:
++ *   UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
++ *   UINT8 keepaliveInterval
++ * uses: WMI_SET_KEEPALIVE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_GET_KEEPALIVE                 60
++/*
++ * arguments:
++ *   UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
++ *   UINT8 keepaliveInterval
++ *   A_BOOL configured
++ * uses: WMI_GET_KEEPALIVE_CMDID
++ */
++
++/*               ====ROM Patching Extended Ioctls====                       */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL              61
++/*
++ * arguments:
++ *     union {
++ *       struct {
++ *         UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
++ *         UINT32 ROM Address
++ *         UINT32 RAM Address
++ *         UINT32 number of bytes
++ *         UINT32 activate? (0 or 1)
++ *       }
++ *       A_UINT32 resulting rompatch ID
++ *     }
++ * uses: BMI_ROMPATCH_INSTALL
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL            62
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
++ *       UINT32 rompatch ID
++ *     }
++ * uses: BMI_ROMPATCH_UNINSTALL
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE             63
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
++ *       UINT32 rompatch count
++ *       UINT32 rompatch IDs[rompatch count]
++ *     }
++ * uses: BMI_ROMPATCH_ACTIVATE
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE           64
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
++ *       UINT32 rompatch count
++ *       UINT32 rompatch IDs[rompatch count]
++ *     }
++ * uses: BMI_ROMPATCH_DEACTIVATE
++ */
++
++#define AR6000_XIOCTL_WMI_SET_APPIE             65
++/*
++ * arguments:
++ *      struct {
++ *          UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
++ *          UINT32  app_frmtype;
++ *          UINT32  app_buflen;
++ *          UINT8   app_buf[];
++ *      }
++ */
++#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER    66
++/*
++ * arguments:
++ *      A_UINT32 filter_type;
++ */
++
++#define AR6000_XIOCTL_DBGLOG_CFG_MODULE             67
++
++#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS         68
++
++#define AR6000_XIOCTL_WMI_SET_WSC_STATUS    		70
++/*
++ * arguments:
++ *      A_UINT32 wsc_status;
++ *            (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
++ */
++
++/*
++ * arguments:
++ *      struct {
++ *          A_UINT8 streamType;
++ *          A_UINT8 status;
++ *      }
++ * uses: WMI_SET_BT_STATUS_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_BT_STATUS             71
++
++/*
++ * arguments:
++ *      struct {
++ *           A_UINT8 paramType;
++ *           union {
++ *               A_UINT8 noSCOPkts;
++ *               BT_PARAMS_A2DP a2dpParams;
++ *               BT_COEX_REGS regs;
++ *           };
++ *      }
++ * uses: WMI_SET_BT_PARAM_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_BT_PARAMS             72
++
++#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE       73
++#define AR6000_XIOCTL_WMI_SET_WOW_MODE              74
++#define AR6000_XIOCTL_WMI_GET_WOW_LIST              75
++#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN           76
++#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN           77
++
++
++
++#define AR6000_XIOCTL_TARGET_INFO                   78
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
++ *   A_UINT32 TargetVersion (returned)
++ *   A_UINT32 TargetType    (returned)
++ * (See also bmi_msg.h target_ver and target_type)
++ */
++
++#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE         79
++/*
++ * arguments:
++ *      none
++ */
++
++#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE       80
++/*
++ * This ioctl is used to emulate traffic activity
++ * timeouts.  Activity/inactivity will trigger the driver
++ * to re-balance credits.
++ *
++ * arguments:
++ *      ar6000_traffic_activity_change
++ */
++
++#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS    81
++/*
++ * This ioctl is used to set the connect control flags
++ *
++ * arguments:
++ *      A_UINT32 connectCtrlFlags
++ */
++
++#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS              82
++/*
++ * This IOCTL sets any Authentication,Key Management and Protection
++ * related parameters. This is used along with the information set in
++ * Connect Command.
++ * Currently this enables Multiple PMKIDs to an AP.
++ *
++ * arguments:
++ *      struct {
++ *          A_UINT32    akmpInfo;
++ *      }
++ * uses: WMI_SET_AKMP_PARAMS_CMD
++ */
++
++#define AR6000_XIOCTL_WMI_GET_PMKID_LIST            83
++
++#define AR6000_XIOCTL_WMI_SET_PMKID_LIST            84
++/*
++ * This IOCTL is used to set a list of PMKIDs. This list of
++ * PMKIDs is used in the [Re]AssocReq Frame. This list is used
++ * only if the MultiPMKID option is enabled via the
++ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS  IOCTL.
++ *
++ * arguments:
++ *      struct {
++ *          A_UINT32    numPMKID;
++ *          WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
++ *      }
++ * uses: WMI_SET_PMKIDLIST_CMD
++ */
++
++/* Historical DSETPATCH support for INI patches */
++#define AR6000_XIOCTL_UNUSED90                      90
++
++
++
++/* used by AR6000_IOCTL_WMI_GETREV */
++struct ar6000_version {
++    A_UINT32        host_ver;
++    A_UINT32        target_ver;
++};
++
++/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
++struct ar6000_queuereq {
++    A_UINT8         trafficClass;
++    A_UINT16        activeTsids;
++};
++
++/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
++typedef struct targetStats_t {
++    A_UINT64    tx_packets;
++    A_UINT64    tx_bytes;
++    A_UINT64    tx_unicast_pkts;
++    A_UINT64    tx_unicast_bytes;
++    A_UINT64    tx_multicast_pkts;
++    A_UINT64    tx_multicast_bytes;
++    A_UINT64    tx_broadcast_pkts;
++    A_UINT64    tx_broadcast_bytes;
++    A_UINT64    tx_rts_success_cnt;
++    A_UINT64    tx_packet_per_ac[4];
++
++    A_UINT64    tx_errors;
++    A_UINT64    tx_failed_cnt;
++    A_UINT64    tx_retry_cnt;
++    A_UINT64    tx_rts_fail_cnt;
++    A_INT32     tx_unicast_rate;
++    A_UINT64    rx_packets;
++    A_UINT64    rx_bytes;
++    A_UINT64    rx_unicast_pkts;
++    A_UINT64    rx_unicast_bytes;
++    A_UINT64    rx_multicast_pkts;
++    A_UINT64    rx_multicast_bytes;
++    A_UINT64    rx_broadcast_pkts;
++    A_UINT64    rx_broadcast_bytes;
++    A_UINT64    rx_fragment_pkt;
++
++    A_UINT64    rx_errors;
++    A_UINT64    rx_crcerr;
++    A_UINT64    rx_key_cache_miss;
++    A_UINT64    rx_decrypt_err;
++    A_UINT64    rx_duplicate_frames;
++    A_INT32     rx_unicast_rate;
++
++    A_UINT64    tkip_local_mic_failure;
++    A_UINT64    tkip_counter_measures_invoked;
++    A_UINT64    tkip_replays;
++    A_UINT64    tkip_format_errors;
++    A_UINT64    ccmp_format_errors;
++    A_UINT64    ccmp_replays;
++
++    A_UINT64    power_save_failure_cnt;
++    A_INT16     noise_floor_calibation;
++
++    A_UINT64    cs_bmiss_cnt;
++    A_UINT64    cs_lowRssi_cnt;
++    A_UINT64    cs_connect_cnt;
++    A_UINT64    cs_disconnect_cnt;
++    A_UINT8     cs_aveBeacon_snr;
++    A_INT16     cs_aveBeacon_rssi;
++    A_UINT8     cs_lastRoam_msec;
++    A_UINT8     cs_snr;
++    A_INT16     cs_rssi;
++
++    A_UINT32    lq_val;
++
++    A_UINT32    wow_num_pkts_dropped;
++    A_UINT8     wow_num_host_pkt_wakeups;
++    A_UINT8     wow_num_host_event_wakeups;
++    A_UINT16    wow_num_events_discarded;
++
++}TARGET_STATS;
++
++typedef struct targetStats_cmd_t {
++    TARGET_STATS targetStats;
++    int clearStats;
++} TARGET_STATS_CMD;
++
++/* used by AR6000_XIOCTL_USER_SETKEYS */
++
++/*
++ * Setting this bit to 1 doesnot initialize the RSC on the firmware
++ */
++#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL    1
++#define AR6000_USER_SETKEYS_RSC_UNCHANGED     0x00000002
++
++typedef struct {
++    A_UINT32  keyOpCtrl;  /* Bit Map of Key Mgmt Ctrl Flags */
++} AR6000_USER_SETKEYS_INFO;
++
++
++/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
++struct ar6000_gpio_output_set_cmd_s {
++    A_UINT32 set_mask;
++    A_UINT32 clear_mask;
++    A_UINT32 enable_mask;
++    A_UINT32 disable_mask;
++};
++
++/*
++ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
++ */
++struct ar6000_gpio_register_cmd_s {
++    A_UINT32 gpioreg_id;
++    A_UINT32 value;
++};
++
++/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
++struct ar6000_gpio_intr_ack_cmd_s {
++    A_UINT32 ack_mask;
++};
++
++/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
++struct ar6000_gpio_intr_wait_cmd_s {
++    A_UINT32 intr_mask;
++    A_UINT32 input_values;
++};
++
++/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
++typedef struct ar6000_dbglog_module_config_s {
++    A_UINT32 valid;
++    A_UINT16 mmask;
++    A_UINT16 tsr;
++    A_BOOL   rep;
++    A_UINT16 size;
++} DBGLOG_MODULE_CONFIG;
++
++typedef struct user_rssi_thold_t {
++    A_INT16     tag;
++    A_INT16     rssi;
++} USER_RSSI_THOLD;
++
++typedef struct user_rssi_params_t {
++    A_UINT8            weight;
++    A_UINT32           pollTime;
++    USER_RSSI_THOLD    tholds[12];
++} USER_RSSI_PARAMS;
++
++/*
++ * Host driver may have some config parameters. Typically, these
++ * config params are one time config parameters. These could
++ * correspond to any of the underlying modules. Host driver exposes
++ * an api for the underlying modules to get this config.
++ */
++#define AR6000_DRIVER_CFG_BASE                  0x8000
++
++/* Should driver perform wlan node caching? */
++#define AR6000_DRIVER_CFG_GET_WLANNODECACHING   0x8001
++/*Should we log raw WMI msgs */
++#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS      0x8002
++
++/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
++struct ar6000_diag_window_cmd_s {
++    unsigned int addr;
++    unsigned int value;
++};
++
++
++struct ar6000_traffic_activity_change {
++    A_UINT32    StreamID;   /* stream ID to indicate activity change */
++    A_UINT32    Active;     /* active (1) or inactive (0) */
++};
++
++#ifdef __cplusplus
++}
++#endif
++#endif
+diff --git a/drivers/ar6000/ar6000/athtypes_linux.h b/drivers/ar6000/ar6000/athtypes_linux.h
+new file mode 100644
+index 0000000..3e91de3
+--- /dev/null
++++ b/drivers/ar6000/ar6000/athtypes_linux.h
+@@ -0,0 +1,47 @@
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHTYPES_LINUX_H_
++#define _ATHTYPES_LINUX_H_
++
++#ifdef __KERNEL__
++#include <linux/types.h>
++#endif
++
++typedef int8_t      A_INT8;
++typedef int16_t     A_INT16;
++typedef int32_t     A_INT32;
++typedef int64_t     A_INT64;
++
++typedef u_int8_t     A_UINT8;
++typedef u_int16_t    A_UINT16;
++typedef u_int32_t    A_UINT32;
++typedef u_int64_t    A_UINT64;
++
++typedef int             A_BOOL;
++typedef char            A_CHAR;
++typedef unsigned char   A_UCHAR;
++typedef unsigned long   A_ATH_TIMER;
++
++
++#endif /* _ATHTYPES_LINUX_H_ */
+diff --git a/drivers/ar6000/ar6000/config_linux.h b/drivers/ar6000/ar6000/config_linux.h
+new file mode 100644
+index 0000000..11a691d
+--- /dev/null
++++ b/drivers/ar6000/ar6000/config_linux.h
+@@ -0,0 +1,44 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _CONFIG_LINUX_H_
++#define _CONFIG_LINUX_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Host-side GPIO support is optional.
++ * If run-time access to GPIO pins is not required, then
++ * this should be changed to #undef.
++ */
++#define CONFIG_HOST_GPIO_SUPPORT
++
++/*
++ * Host side Test Command support
++ */
++#define CONFIG_HOST_TCMD_SUPPORT
++
++#define USE_4BYTE_REGISTER_ACCESS
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/drivers/ar6000/ar6000/debug_linux.h b/drivers/ar6000/ar6000/debug_linux.h
+new file mode 100644
+index 0000000..c74e1df
+--- /dev/null
++++ b/drivers/ar6000/ar6000/debug_linux.h
+@@ -0,0 +1,86 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _DEBUG_LINUX_H_
++#define _DEBUG_LINUX_H_
++
++#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
++
++extern A_UINT32 g_dbg_flags;
++
++#define DBGFMT  "%s() : "
++#define DBGARG  __func__
++#define DBGFN	A_PRINTF
++
++/* ------- Debug related stuff ------- */
++enum {
++    ATH_DEBUG_SEND = 0x0001,
++    ATH_DEBUG_RECV = 0x0002,
++    ATH_DEBUG_SYNC = 0x0004,
++    ATH_DEBUG_DUMP = 0x0008,
++    ATH_DEBUG_IRQ  = 0x0010,
++    ATH_DEBUG_TRC  = 0x0020,
++    ATH_DEBUG_WARN = 0x0040,
++    ATH_DEBUG_ERR  = 0x0080,
++    ATH_LOG_INF	   = 0x0100,
++    ATH_DEBUG_BMI  = 0x0110,
++    ATH_DEBUG_WMI  = 0x0120,
++    ATH_DEBUG_HIF  = 0x0140,
++    ATH_DEBUG_HTC  = 0x0180,
++    ATH_DEBUG_WLAN = 0x1000,
++    ATH_LOG_ERR	   = 0x1010,
++    ATH_DEBUG_ANY  = 0xFFFF,
++};
++
++#ifdef DEBUG
++
++#define A_DPRINTF(f, a) \
++	if(g_dbg_flags & (f)) \
++	{	\
++		DBGFN a ; \
++	}
++
++
++// TODO FIX usage of A_PRINTF!
++#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
++#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
++    if (debughtc & ATH_DEBUG_DUMP) {             \
++        DebugDumpBytes(buffer, length,desc);               \
++    }                                            \
++} while(0)
++#define PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(flags, args) do {        \
++    if (debughtc & (flags)) {                    \
++        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
++    }                                            \
++} while (0)
++#define AR_DEBUG_ASSERT(test) do {               \
++    if (!(test)) {                               \
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
++    }                                            \
++} while(0)
++extern int debughtc;
++#else
++#define AR_DEBUG_PRINTF(flags, args)
++#define AR_DEBUG_PRINTBUF(buffer, length, desc)
++#define AR_DEBUG_ASSERT(test)
++#define AR_DEBUG_LVL_CHECK(lvl) 0
++#define A_DPRINTF(f, a)
++#endif
++
++#endif /* _DEBUG_LINUX_H_ */
+diff --git a/drivers/ar6000/ar6000/ioctl.c b/drivers/ar6000/ar6000/ioctl.c
+new file mode 100644
+index 0000000..04aa911
+--- /dev/null
++++ b/drivers/ar6000/ar6000/ioctl.c
+@@ -0,0 +1,2532 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++extern USER_RSSI_THOLD rssi_map[12];
++extern unsigned int wmitimeout;
++extern A_WAITQUEUE_HEAD arEvent;
++extern int tspecCompliance;
++extern int bypasswmi;
++
++static int
++ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    /* currently assume only roam times are required */
++    if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) {
++        return -EIO;
++    }
++
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_ROAM_CTRL_CMD cmd;
++    A_UINT8 size = sizeof(cmd);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) {
++        if (cmd.info.bssBiasInfo.numBss > 1) {
++            size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS);
++        }
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_POWERSAVE_TIMERS_POLICY_CMD cmd;
++    A_UINT8 size = sizeof(cmd);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_WMM_CMD cmd;
++    A_STATUS ret;
++
++    if ((dev->flags & IFF_UP) != IFF_UP) {
++        return -EIO;
++    }
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
++                                sizeof(cmd)))
++    {
++        return -EFAULT;
++    }
++
++    if (cmd.status == WMI_WMM_ENABLED) {
++        ar->arWmmEnabled = TRUE;
++    } else {
++        ar->arWmmEnabled = FALSE;
++    }
++
++    ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_WMM_TXOP_CMD cmd;
++    A_STATUS ret;
++
++    if ((dev->flags & IFF_UP) != IFF_UP) {
++        return -EIO;
++    }
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
++                                sizeof(cmd)))
++    {
++        return -EFAULT;
++    }
++
++    ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_STATUS ret = 0;
++
++    if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1),
++                            &ar->arRegCode, sizeof(ar->arRegCode)))
++        ret = -EFAULT;
++
++    return ret;
++}
++
++
++/* Get power mode command */
++static int
++ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_POWER_MODE_CMD power_mode;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi);
++    if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) {
++        ret = -EFAULT;
++    }
++
++    return ret;
++}
++
++
++static int
++ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_CHANNEL_PARAMS_CMD cmd, *cmdp;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (cmd.numChannels > 1) {
++        cmdp = A_MALLOC(130);
++        if (copy_from_user(cmdp, rq->ifr_data,
++                           sizeof (*cmdp) +
++                           ((cmd.numChannels - 1) * sizeof(A_UINT16))))
++        {
++            kfree(cmdp);
++            return -EFAULT;
++        }
++    } else {
++        cmdp = &cmd;
++    }
++
++    if ((ar->arPhyCapability == WMI_11G_CAPABILITY) &&
++        ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE)))
++    {
++        ret = -EINVAL;
++    }
++
++    if (!ret &&
++        (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode,
++                                   cmdp->numChannels, cmdp->channelList)
++         != A_OK))
++    {
++        ret = -EIO;
++    }
++
++    if (cmd.numChannels > 1) {
++        kfree(cmdp);
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq)
++{
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SNR_THRESHOLD_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq)
++{
++#define SWAP_THOLD(thold1, thold2) do { \
++    USER_RSSI_THOLD tmpThold;           \
++    tmpThold.tag = thold1.tag;          \
++    tmpThold.rssi = thold1.rssi;        \
++    thold1.tag = thold2.tag;            \
++    thold1.rssi = thold2.rssi;          \
++    thold2.tag = tmpThold.tag;          \
++    thold2.rssi = tmpThold.rssi;        \
++} while (0)
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_RSSI_THRESHOLD_PARAMS_CMD cmd;
++    USER_RSSI_PARAMS rssiParams;
++    A_INT32 i, j;
++
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) {
++        return -EFAULT;
++    }
++    cmd.weight = rssiParams.weight;
++    cmd.pollTime = rssiParams.pollTime;
++
++    A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map));
++    /*
++     *  only 6 elements, so use bubble sorting, in ascending order
++     */
++    for (i = 5; i > 0; i--) {
++        for (j = 0; j < i; j++) { /* above tholds */
++            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
++                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
++            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
++                return EFAULT;
++            }
++        }
++    }
++    for (i = 11; i > 6; i--) {
++        for (j = 6; j < i; j++) { /* below tholds */
++            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
++                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
++            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
++                return EFAULT;
++            }
++        }
++    }
++
++#ifdef DEBUG
++    for (i = 0; i < 12; i++) {
++        AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n",
++                i, rssi_map[i].tag, i, rssi_map[i].rssi);
++    }
++#endif
++    cmd.thresholdAbove1_Val = rssi_map[0].rssi;
++    cmd.thresholdAbove2_Val = rssi_map[1].rssi;
++    cmd.thresholdAbove3_Val = rssi_map[2].rssi;
++    cmd.thresholdAbove4_Val = rssi_map[3].rssi;
++    cmd.thresholdAbove5_Val = rssi_map[4].rssi;
++    cmd.thresholdAbove6_Val = rssi_map[5].rssi;
++    cmd.thresholdBelow1_Val = rssi_map[6].rssi;
++    cmd.thresholdBelow2_Val = rssi_map[7].rssi;
++    cmd.thresholdBelow3_Val = rssi_map[8].rssi;
++    cmd.thresholdBelow4_Val = rssi_map[9].rssi;
++    cmd.thresholdBelow5_Val = rssi_map[10].rssi;
++    cmd.thresholdBelow6_Val = rssi_map[11].rssi;
++
++    if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq)
++{
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_LQ_THRESHOLD_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++
++static int
++ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_PROBED_SSID_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength,
++                                  cmd.ssid) != A_OK)
++    {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_ADD_BAD_AP_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) {
++        return -EIO;
++    }
++
++    if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) {
++        /*
++         * This is a delete badAP.
++         */
++        if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) {
++            ret = -EIO;
++        }
++    } else {
++        if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) {
++            ret = -EIO;
++        }
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_CREATE_PSTREAM_CMD cmd;
++    A_STATUS ret;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_verify_tspec_params(&cmd, tspecCompliance);
++    if (ret == A_OK)
++        ret = wmi_create_pstream_cmd(ar->arWmi, &cmd);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_DELETE_PSTREAM_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ar6000_queuereq qreq;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if( copy_from_user(&qreq, rq->ifr_data,
++                  sizeof(struct ar6000_queuereq)))
++        return -EFAULT;
++
++    qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass);
++
++    if (copy_to_user(rq->ifr_data, &qreq,
++                 sizeof(struct ar6000_queuereq)))
++    {
++        ret = -EFAULT;
++    }
++
++    return ret;
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev,
++                                 struct ifreq *rq, A_UINT8 *data, A_UINT32 len)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT32    buf[2];
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    ar->tcmdRxReport = 0;
++    if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        ret = -EINTR;
++    }
++
++    buf[0] = ar->tcmdRxTotalPkt;
++    buf[1] = ar->tcmdRxRssi;
++    if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) {
++        ret = -EFAULT;
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++void
++ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++    TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results;
++
++    ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt;
++    ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm;
++    ar->tcmdRxReport = 1;
++
++    wake_up(&arEvent);
++}
++#endif /* CONFIG_HOST_TCMD_SUPPORT*/
++
++static int
++ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_TARGET_ERROR_REPORT_BITMASK cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask);
++
++    return  (ret==0 ? ret : -EINVAL);
++}
++
++static int
++ar6000_clear_target_stats(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++       return -EIO;
++    }
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++    A_MEMZERO(pStats, sizeof(TARGET_STATS));
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++    return ret;
++}
++
++static int
++ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS_CMD cmd;
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++
++    ar->statsUpdatePending = TRUE;
++
++    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        ret = -EINTR;
++    }
++
++    if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) {
++        ret = -EFAULT;
++    }
++
++    if (cmd.clearStats == 1) {
++        ret = ar6000_clear_target_stats(dev);
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_ACCESS_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax,
++                                  cmd.aifsn) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_DISC_TIMEOUT_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_VOICE_PKT_SIZE_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_MAX_SP_LEN_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++
++static int
++ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_BT_STATUS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_BT_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++struct ar6000_gpio_intr_wait_cmd_s  gpio_intr_results;
++/* gpio_reg_results and gpio_data_available are protected by arSem */
++static struct ar6000_gpio_register_cmd_s gpio_reg_results;
++static A_BOOL gpio_data_available; /* Requested GPIO data available */
++static A_BOOL gpio_intr_available; /* GPIO interrupt info available */
++static A_BOOL gpio_ack_received;   /* GPIO ack was received */
++
++/* Host-side initialization for General Purpose I/O support */
++void ar6000_gpio_init(void)
++{
++    gpio_intr_available = FALSE;
++    gpio_data_available = FALSE;
++    gpio_ack_received   = FALSE;
++}
++
++/*
++ * Called when a GPIO interrupt is received from the Target.
++ * intr_values shows which GPIO pins have interrupted.
++ * input_values shows a recent value of GPIO pins.
++ */
++void
++ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values)
++{
++    gpio_intr_results.intr_mask = intr_mask;
++    gpio_intr_results.input_values = input_values;
++    *((volatile A_BOOL *)&gpio_intr_available) = TRUE;
++    wake_up(&arEvent);
++}
++
++/*
++ * This is called when a response is received from the Target
++ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get
++ * call.
++ */
++void
++ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value)
++{
++    gpio_reg_results.gpioreg_id = reg_id;
++    gpio_reg_results.value = value;
++    *((volatile A_BOOL *)&gpio_data_available) = TRUE;
++    wake_up(&arEvent);
++}
++
++/*
++ * This is called when an acknowledgement is received from the Target
++ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set
++ * call.
++ */
++void
++ar6000_gpio_ack_rx(void)
++{
++    gpio_ack_received = TRUE;
++    wake_up(&arEvent);
++}
++
++A_STATUS
++ar6000_gpio_output_set(struct net_device *dev,
++                       A_UINT32 set_mask,
++                       A_UINT32 clear_mask,
++                       A_UINT32 enable_mask,
++                       A_UINT32 disable_mask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_ack_received = FALSE;
++    return wmi_gpio_output_set(ar->arWmi,
++                set_mask, clear_mask, enable_mask, disable_mask);
++}
++
++static A_STATUS
++ar6000_gpio_input_get(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
++    return wmi_gpio_input_get(ar->arWmi);
++}
++
++static A_STATUS
++ar6000_gpio_register_set(struct net_device *dev,
++                         A_UINT32 gpioreg_id,
++                         A_UINT32 value)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_ack_received = FALSE;
++    return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value);
++}
++
++static A_STATUS
++ar6000_gpio_register_get(struct net_device *dev,
++                         A_UINT32 gpioreg_id)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
++    return wmi_gpio_register_get(ar->arWmi, gpioreg_id);
++}
++
++static A_STATUS
++ar6000_gpio_intr_ack(struct net_device *dev,
++                     A_UINT32 ack_mask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_intr_available = FALSE;
++    return wmi_gpio_intr_ack(ar->arWmi, ack_mask);
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    HIF_DEVICE *hifDevice = ar->arHifDevice;
++    int ret, param, param2;
++    unsigned int address = 0;
++    unsigned int length = 0;
++    unsigned char *buffer;
++    char *userdata;
++    A_UINT32 connectCtrlFlags;
++
++
++    static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
++                                           WMI_SHORTSCANRATIO_DEFAULT,
++                                           DEFAULT_SCAN_CTRL_FLAGS,
++                                           0};
++    WMI_SET_AKMP_PARAMS_CMD  akmpParams;
++    WMI_SET_PMKID_LIST_CMD   pmkidInfo;
++
++    if (cmd == AR6000_IOCTL_EXTENDED)
++    {
++        /*
++         * This allows for many more wireless ioctls than would otherwise
++         * be available.  Applications embed the actual ioctl command in
++         * the first word of the parameter block, and use the command
++         * AR6000_IOCTL_EXTENDED_CMD on the ioctl call.
++         */
++        get_user(cmd, (int *)rq->ifr_data);
++        userdata = (char *)(((unsigned int *)rq->ifr_data)+1);
++    }
++    else
++    {
++        userdata = (char *)rq->ifr_data;
++    }
++
++    if ((ar->arWlanState == WLAN_DISABLED) &&
++        ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) &&
++         (cmd != AR6000_XIOCTL_DIAG_READ) &&
++         (cmd != AR6000_XIOCTL_DIAG_WRITE)))
++    {
++        return -EIO;
++    }
++
++    ret = 0;
++    switch(cmd)
++    {
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++        case AR6000_XIOCTL_TCMD_CONT_TX:
++            {
++                TCMD_CONT_TX txCmd;
++
++                if (ar->tcmdPm == TCMD_PM_SLEEP) {
++                    A_PRINTF("Can NOT send tx tcmd when target is asleep! \n");
++                    return -EFAULT;
++                }
++
++                if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX)))
++                    return -EFAULT;
++                wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX));
++            }
++            break;
++        case AR6000_XIOCTL_TCMD_CONT_RX:
++            {
++                TCMD_CONT_RX rxCmd;
++
++                if (ar->tcmdPm == TCMD_PM_SLEEP) {
++                    A_PRINTF("Can NOT send rx tcmd when target is asleep! \n");
++                    return -EFAULT;
++                }
++                if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX)))
++                    return -EFAULT;
++                switch(rxCmd.act)
++                {
++                    case TCMD_CONT_RX_PROMIS:
++                    case TCMD_CONT_RX_FILTER:
++                    case TCMD_CONT_RX_SETMAC:
++                         wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd,
++                                                sizeof(TCMD_CONT_RX));
++                         break;
++                    case TCMD_CONT_RX_REPORT:
++                         ar6000_ioctl_tcmd_get_rx_report(dev, rq,
++                         (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX));
++                         break;
++                    default:
++                         A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act);
++                         return -EINVAL;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_TCMD_PM:
++            {
++                TCMD_PM pmCmd;
++
++                if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM)))
++                    return -EFAULT;
++                ar->tcmdPm = pmCmd.mode;
++                wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM));
++            }
++            break;
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++        case AR6000_XIOCTL_BMI_DONE:
++            ret = BMIDone(hifDevice);
++            break;
++
++        case AR6000_XIOCTL_BMI_READ_MEMORY:
++            get_user(address, (unsigned int *)userdata);
++            get_user(length, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n",
++                             address, length);
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                ret = BMIReadMemory(hifDevice, address, buffer, length);
++                if (copy_to_user(rq->ifr_data, buffer, length)) {
++                    ret = -EFAULT;
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++            break;
++
++        case AR6000_XIOCTL_BMI_WRITE_MEMORY:
++            get_user(address, (unsigned int *)userdata);
++            get_user(length, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n",
++                             address, length);
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                if (copy_from_user(buffer, &userdata[sizeof(address) +
++                                   sizeof(length)], length))
++                {
++                    ret = -EFAULT;
++                } else {
++                    ret = BMIWriteMemory(hifDevice, address, buffer, length);
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++            break;
++
++        case AR6000_XIOCTL_BMI_TEST:
++           AR_DEBUG_PRINTF("No longer supported\n");
++           ret = -EOPNOTSUPP;
++           break;
++
++        case AR6000_XIOCTL_BMI_EXECUTE:
++            get_user(address, (unsigned int *)userdata);
++            get_user(param, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n",
++                             address, param);
++            ret = BMIExecute(hifDevice, address, &param);
++            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
++            break;
++
++        case AR6000_XIOCTL_BMI_SET_APP_START:
++            get_user(address, (unsigned int *)userdata);
++            AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address);
++            ret = BMISetAppStart(hifDevice, address);
++            break;
++
++        case AR6000_XIOCTL_BMI_READ_SOC_REGISTER:
++            get_user(address, (unsigned int *)userdata);
++            ret = BMIReadSOCRegister(hifDevice, address, &param);
++            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
++            break;
++
++        case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER:
++            get_user(address, (unsigned int *)userdata);
++            get_user(param, (unsigned int *)userdata + 1);
++            ret = BMIWriteSOCRegister(hifDevice, address, param);
++            break;
++
++#ifdef HTC_RAW_INTERFACE
++        case AR6000_XIOCTL_HTC_RAW_OPEN:
++            ret = A_OK;
++            if (!arRawIfEnabled(ar)) {
++                /* make sure block size is set in case the target was reset since last
++                  * BMI phase (i.e. flashup downloads) */
++                ret = ar6000_SetHTCBlockSize(ar);
++                if (A_FAILED(ret)) {
++                    break;
++                }
++                /* Terminate the BMI phase */
++                ret = BMIDone(hifDevice);
++                if (ret == A_OK) {
++                    ret = ar6000_htc_raw_open(ar);
++                }
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_CLOSE:
++            if (arRawIfEnabled(ar)) {
++                ret = ar6000_htc_raw_close(ar);
++                arRawIfEnabled(ar) = FALSE;
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_READ:
++            if (arRawIfEnabled(ar)) {
++                unsigned int streamID;
++                get_user(streamID, (unsigned int *)userdata);
++                get_user(length, (unsigned int *)userdata + 1);
++                buffer = rq->ifr_data + sizeof(length);
++                ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID,
++                                          buffer, length);
++                put_user(ret, (unsigned int *)rq->ifr_data);
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_WRITE:
++            if (arRawIfEnabled(ar)) {
++                unsigned int streamID;
++                get_user(streamID, (unsigned int *)userdata);
++                get_user(length, (unsigned int *)userdata + 1);
++                buffer = userdata + sizeof(streamID) + sizeof(length);
++                ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID,
++                                           buffer, length);
++                put_user(ret, (unsigned int *)rq->ifr_data);
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++#endif /* HTC_RAW_INTERFACE */
++
++        case AR6000_IOCTL_WMI_GETREV:
++        {
++            if (copy_to_user(rq->ifr_data, &ar->arVersion,
++                             sizeof(ar->arVersion)))
++            {
++                ret = -EFAULT;
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETPWR:
++        {
++            WMI_POWER_MODE_CMD pwrModeCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&pwrModeCmd, userdata,
++                                   sizeof(pwrModeCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS:
++        {
++            WMI_IBSS_PM_CAPS_CMD ibssPmCaps;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&ibssPmCaps, userdata,
++                                   sizeof(ibssPmCaps)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl,
++                    ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar->arIbssPsEnable = ibssPmCaps.power_saving;
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_PMPARAMS:
++        {
++            WMI_POWER_PARAMS_CMD pmParams;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&pmParams, userdata,
++                                      sizeof(pmParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period,
++                                     pmParams.pspoll_number,
++                                     pmParams.dtim_policy) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETSCAN:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&scParams, userdata,
++                                      sizeof(scParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) {
++                    ar->arSkipScan = FALSE;
++                } else {
++                    ar->arSkipScan = TRUE;
++                }
++
++                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETLISTENINT:
++        {
++            WMI_LISTEN_INT_CMD listenCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&listenCmd, userdata,
++                                      sizeof(listenCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                    if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) {
++                        ret = -EIO;
++                    } else {
++                        AR6000_SPIN_LOCK(&ar->arLock, 0);
++                        ar->arListenInterval = param;
++                        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                    }
++
++                }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_BMISS_TIME:
++        {
++            WMI_BMISS_TIME_CMD bmissCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&bmissCmd, userdata,
++                                      sizeof(bmissCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETBSSFILTER:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++
++                get_user(param, (unsigned char *)userdata);
++                get_user(param2, (unsigned int *)(userdata + 1));
++		printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2);
++                if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_snr_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_rssi_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_CLR_RSSISNR:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            }
++            ret = wmi_clr_rssi_snr(ar->arWmi);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_lq_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_LPREAMBLE:
++        {
++            WMI_SET_LPREAMBLE_CMD setLpreambleCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setLpreambleCmd, userdata,
++                                   sizeof(setLpreambleCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_RTS:
++        {
++            WMI_SET_RTS_CMD rtsCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&rtsCmd, userdata,
++                                   sizeof(rtsCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WMM:
++        {
++            ret = ar6000_ioctl_set_wmm(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_TXOP:
++        {
++            ret = ar6000_ioctl_set_txop(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_RD:
++        {
++            ret = ar6000_ioctl_get_rd(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_CHANNELPARAMS:
++        {
++            ret = ar6000_ioctl_set_channelParams(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_PROBEDSSID:
++        {
++            ret = ar6000_ioctl_set_probedSsid(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_BADAP:
++        {
++            ret = ar6000_ioctl_set_badAp(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_CREATE_QOS:
++        {
++            ret = ar6000_ioctl_create_qos(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_DELETE_QOS:
++        {
++            ret = ar6000_ioctl_delete_qos(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_GET_QOS_QUEUE:
++        {
++            ret = ar6000_ioctl_get_qos_queue(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_GET_TARGET_STATS:
++        {
++            ret = ar6000_ioctl_get_target_stats(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK:
++        {
++            ret = ar6000_ioctl_set_error_report_bitmask(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ASSOC_INFO:
++        {
++            WMI_SET_ASSOC_INFO_CMD cmd;
++            A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN];
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++                get_user(cmd.ieType, userdata);
++                if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) {
++                    ret = -EIO;
++                } else {
++                    get_user(cmd.bufferSize, userdata + 1);
++                    if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) {
++                        ret = -EFAULT;
++                        break;
++                    }
++                    if (copy_from_user(assocInfo, userdata + 2,
++                                       cmd.bufferSize))
++                    {
++                        ret = -EFAULT;
++                    } else {
++                        if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType,
++                                                 cmd.bufferSize,
++                                                 assocInfo) != A_OK)
++                        {
++                            ret = -EIO;
++                        }
++                    }
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS:
++        {
++            ret = ar6000_ioctl_set_access_params(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT:
++        {
++            ret = ar6000_ioctl_set_disconnect_timeout(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_FORCE_TARGET_RESET:
++        {
++            if (ar->arHtcTarget)
++            {
++//                HTCForceReset(htcTarget);
++            }
++            else
++            {
++                AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n");
++            }
++            break;
++        }
++        case AR6000_XIOCTL_TARGET_INFO:
++        case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */
++        {
++            /* If we made it to here, then the Target exists and is ready. */
++
++            if (cmd == AR6000_XIOCTL_TARGET_INFO) {
++                if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver,
++                                 sizeof(ar->arVersion.target_ver)))
++                {
++                    ret = -EFAULT;
++                }
++                if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType,
++                                 sizeof(ar->arTargetType)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS:
++        {
++            WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam;
++
++            if (copy_from_user(&hbparam, userdata, sizeof(hbparam)))
++            {
++                ret = -EFAULT;
++            } else {
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                /* Start a cyclic timer with the parameters provided. */
++                if (hbparam.frequency) {
++                    ar->arHBChallengeResp.frequency = hbparam.frequency;
++                }
++                if (hbparam.threshold) {
++                    ar->arHBChallengeResp.missThres = hbparam.threshold;
++                }
++
++                /* Delete the pending timer and start a new one */
++                if (timer_pending(&ar->arHBChallengeResp.timer)) {
++                    A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
++                }
++                A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP:
++        {
++            A_UINT32 cookie;
++
++            if (copy_from_user(&cookie, userdata, sizeof(cookie))) {
++                return -EFAULT;
++            }
++
++            /* Send the challenge on the control channel */
++            if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) {
++                return -EIO;
++            }
++            break;
++        }
++#ifdef USER_KEYS
++        case AR6000_XIOCTL_USER_SETKEYS:
++        {
++
++            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN;
++
++            if (copy_from_user(&ar->user_key_ctrl, userdata,
++                               sizeof(ar->user_key_ctrl)))
++            {
++                return -EFAULT;
++            }
++
++            A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl);
++            break;
++        }
++#endif /* USER_KEYS */
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++        case AR6000_XIOCTL_GPIO_OUTPUT_SET:
++        {
++            struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_output_set_cmd, userdata,
++                                sizeof(gpio_output_set_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_output_set(dev,
++                                             gpio_output_set_cmd.set_mask,
++                                             gpio_output_set_cmd.clear_mask,
++                                             gpio_output_set_cmd.enable_mask,
++                                             gpio_output_set_cmd.disable_mask);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INPUT_GET:
++        {
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            ret = ar6000_gpio_input_get(dev);
++            if (ret != A_OK) {
++                up(&ar->arSem);
++                return -EIO;
++            }
++
++            /* Wait for Target to respond. */
++            wait_event_interruptible(arEvent, gpio_data_available);
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            } else {
++                A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE);
++
++                if (copy_to_user(userdata, &gpio_reg_results.value,
++                                 sizeof(gpio_reg_results.value)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_REGISTER_SET:
++        {
++            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_register_cmd, userdata,
++                                sizeof(gpio_register_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_register_set(dev,
++                                               gpio_register_cmd.gpioreg_id,
++                                               gpio_register_cmd.value);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++
++                /* Wait for acknowledgement from Target */
++                wait_event_interruptible(arEvent, gpio_ack_received);
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_REGISTER_GET:
++        {
++            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_register_cmd, userdata,
++                                sizeof(gpio_register_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id);
++                if (ret != A_OK) {
++                    up(&ar->arSem);
++                    return -EIO;
++                }
++
++                /* Wait for Target to respond. */
++                wait_event_interruptible(arEvent, gpio_data_available);
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                } else {
++                    A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id);
++                    if (copy_to_user(userdata, &gpio_reg_results,
++                                     sizeof(gpio_reg_results)))
++                    {
++                        ret = -EFAULT;
++                    }
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INTR_ACK:
++        {
++            struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_intr_ack_cmd, userdata,
++                                sizeof(gpio_intr_ack_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INTR_WAIT:
++        {
++            /* Wait for Target to report an interrupt. */
++            dev_hold(dev);
++            rtnl_unlock();
++            wait_event_interruptible(arEvent, gpio_intr_available);
++            rtnl_lock();
++            __dev_put(dev);
++
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            } else {
++                if (copy_to_user(userdata, &gpio_intr_results,
++                                 sizeof(gpio_intr_results)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            break;
++        }
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++        case AR6000_XIOCTL_DBGLOG_CFG_MODULE:
++        {
++            struct ar6000_dbglog_module_config_s config;
++
++            if (copy_from_user(&config, userdata, sizeof(config))) {
++                return -EFAULT;
++            }
++
++            /* Send the challenge on the control channel */
++            if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask,
++                                            config.tsr, config.rep,
++                                            config.size, config.valid) != A_OK)
++            {
++                return -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS:
++        {
++            /* Send the challenge on the control channel */
++            if (ar6000_dbglog_get_debug_logs(ar) != A_OK)
++            {
++                return -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_ADHOC_BSSID:
++        {
++            WMI_SET_ADHOC_BSSID_CMD adhocBssid;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&adhocBssid, userdata,
++                                      sizeof(adhocBssid)))
++            {
++                ret = -EFAULT;
++            } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac,
++                                AR6000_ETH_ADDR_LEN) == 0)
++            {
++                ret = -EFAULT;
++            } else {
++
++                A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid));
++        }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_OPT_MODE:
++        {
++        WMI_SET_OPT_MODE_CMD optModeCmd;
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&optModeCmd, userdata,
++                                      sizeof(optModeCmd)))
++            {
++                ret = -EFAULT;
++            } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) {
++                ret = -EFAULT;
++
++            } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode)
++                       != A_OK)
++            {
++                ret = -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_OPT_SEND_FRAME:
++        {
++        WMI_OPT_TX_FRAME_CMD optTxFrmCmd;
++            A_UINT8 data[MAX_OPT_DATA_LEN];
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&optTxFrmCmd, userdata,
++                                      sizeof(optTxFrmCmd)))
++            {
++                ret = -EFAULT;
++            } else if (copy_from_user(data,
++                                      userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1,
++                                      optTxFrmCmd.optIEDataLen))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = wmi_opt_tx_frame_cmd(ar->arWmi,
++                                           optTxFrmCmd.frmType,
++                                           optTxFrmCmd.dstAddr,
++                                           optTxFrmCmd.bssid,
++                                           optTxFrmCmd.optIEDataLen,
++                                           data);
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SETRETRYLIMITS:
++        {
++            WMI_SET_RETRY_LIMITS_CMD setRetryParams;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setRetryParams, userdata,
++                                      sizeof(setRetryParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType,
++                                          setRetryParams.trafficClass,
++                                          setRetryParams.maxRetries,
++                                          setRetryParams.enableNotify) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar->arMaxRetries = setRetryParams.maxRetries;
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL:
++        {
++            WMI_BEACON_INT_CMD bIntvlCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&bIntvlCmd, userdata,
++                       sizeof(bIntvlCmd)))
++            {
++                ret = -EFAULT;
++            } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval)
++                        != A_OK)
++            {
++                ret = -EIO;
++            }
++            break;
++        }
++        case IEEE80211_IOCTL_SETAUTHALG:
++        {
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            struct ieee80211req_authalg req;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&req, userdata,
++                       sizeof(struct ieee80211req_authalg)))
++            {
++                ret = -EFAULT;
++            } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) {
++                ar->arDot11AuthMode  = OPEN_AUTH;
++                ar->arPairwiseCrypto  = NONE_CRYPT;
++                ar->arGroupCrypto     = NONE_CRYPT;
++            } else if (req.auth_alg == AUTH_ALG_LEAP) {
++                ar->arDot11AuthMode   = LEAP_AUTH;
++            } else {
++                ret = -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_VOICE_PKT_SIZE:
++            ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata);
++            break;
++
++        case AR6000_XIOCTL_SET_MAX_SP:
++            ret = ar6000_xioctl_set_max_sp_len(dev, userdata);
++            break;
++
++        case AR6000_XIOCTL_WMI_GET_ROAM_TBL:
++            ret = ar6000_ioctl_get_roam_tbl(dev, rq);
++            break;
++        case AR6000_XIOCTL_WMI_SET_ROAM_CTRL:
++            ret = ar6000_ioctl_set_roam_ctrl(dev, userdata);
++            break;
++        case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS:
++            ret = ar6000_ioctl_set_powersave_timers(dev, userdata);
++            break;
++        case AR6000_XIOCTRL_WMI_GET_POWER_MODE:
++            ret = ar6000_ioctl_get_power_mode(dev, rq);
++            break;
++        case AR6000_XIOCTRL_WMI_SET_WLAN_STATE:
++            get_user(ar->arWlanState, (unsigned int *)userdata);
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++                break;
++            }
++
++            if (ar->arWlanState == WLAN_ENABLED) {
++                /* Enable foreground scanning */
++                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                if (ar->arSsidLen) {
++                    ar->arConnectPending = TRUE;
++                    if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
++                                        ar->arDot11AuthMode, ar->arAuthMode,
++                                        ar->arPairwiseCrypto,
++                                        ar->arPairwiseCryptoLen,
++                                        ar->arGroupCrypto, ar->arGroupCryptoLen,
++                                        ar->arSsidLen, ar->arSsid,
++                                        ar->arReqBssid, ar->arChannelHint,
++                                        ar->arConnectCtrlFlags) != A_OK)
++                    {
++                        ret = -EIO;
++                        ar->arConnectPending = FALSE;
++                    }
++                }
++            } else {
++                /* Disconnect from the AP and disable foreground scanning */
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
++                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                    wmi_disconnect_cmd(ar->arWmi);
++                } else {
++                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                }
++
++                if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_GET_ROAM_DATA:
++            ret = ar6000_ioctl_get_roam_data(dev, rq);
++            break;
++        case AR6000_XIOCTL_WMI_SET_BT_STATUS:
++            ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata);
++            break;
++        case AR6000_XIOCTL_WMI_SET_BT_PARAMS:
++            ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata);
++            break;
++        case AR6000_XIOCTL_WMI_STARTSCAN:
++        {
++            WMI_START_SCAN_CMD setStartScanCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                    ret = -EIO;
++                } else if (copy_from_user(&setStartScanCmd, userdata,
++                                          sizeof(setStartScanCmd)))
++                {
++                    ret = -EFAULT;
++                } else {
++                    if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType,
++                                    setStartScanCmd.forceFgScan,
++                                    setStartScanCmd.isLegacy,
++                                    setStartScanCmd.homeDwellTime,
++                                    setStartScanCmd.forceScanInterval) != A_OK)
++                    {
++                        ret = -EIO;
++                    }
++                }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SETFIXRATES:
++        {
++            WMI_FIX_RATES_CMD setFixRatesCmd;
++            A_STATUS returnStatus;
++
++            if (ar->arWmiReady == FALSE) {
++                    ret = -EIO;
++                } else if (copy_from_user(&setFixRatesCmd, userdata,
++                                          sizeof(setFixRatesCmd)))
++                {
++                    ret = -EFAULT;
++                } else {
++                    returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask);
++                    if (returnStatus == A_EINVAL)
++                    {
++                        ret = -EINVAL;
++                    }
++                    else if(returnStatus != A_OK) {
++                        ret = -EIO;
++                    }
++                }
++            break;
++        }
++
++        case AR6000_XIOCTL_WMI_GETFIXRATES:
++        {
++            WMI_FIX_RATES_CMD getFixRatesCmd;
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            int ret = 0;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++            /* Used copy_from_user/copy_to_user to access user space data */
++            if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) {
++                ret = -EFAULT;
++            } else {
++                ar->arRateMask = 0xFFFF;
++
++                if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) {
++                    up(&ar->arSem);
++                    return -EIO;
++                }
++
++                wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ);
++
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                }
++
++                if (!ret) {
++                    getFixRatesCmd.fixRateMask = ar->arRateMask;
++                }
++
++                if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) {
++                   ret = -EFAULT;
++                }
++
++                up(&ar->arSem);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_AUTHMODE:
++        {
++            WMI_SET_AUTH_MODE_CMD setAuthMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setAuthMode, userdata,
++                                      sizeof(setAuthMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_REASSOCMODE:
++        {
++            WMI_SET_REASSOC_MODE_CMD setReassocMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setReassocMode, userdata,
++                                      sizeof(setReassocMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_DIAG_READ:
++        {
++            A_UINT32 addr, data;
++            get_user(addr, (unsigned int *)userdata);
++            if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
++                ret = -EIO;
++            }
++            put_user(data, (unsigned int *)userdata + 1);
++            break;
++        }
++        case AR6000_XIOCTL_DIAG_WRITE:
++        {
++            A_UINT32 addr, data;
++            get_user(addr, (unsigned int *)userdata);
++            get_user(data, (unsigned int *)userdata + 1);
++            if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
++                ret = -EIO;
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_KEEPALIVE:
++        {
++             WMI_SET_KEEPALIVE_CMD setKeepAlive;
++             if (ar->arWmiReady == FALSE) {
++                 return -EIO;
++             } else if (copy_from_user(&setKeepAlive, userdata,
++                        sizeof(setKeepAlive))){
++                 ret = -EFAULT;
++             } else {
++                 if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) {
++                     ret = -EIO;
++               }
++             }
++             break;
++        }
++        case AR6000_XIOCTL_WMI_GET_KEEPALIVE:
++        {
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            WMI_GET_KEEPALIVE_CMD getKeepAlive;
++            int ret = 0;
++            if (ar->arWmiReady == FALSE) {
++               return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++            if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) {
++               ret = -EFAULT;
++            } else {
++            getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi);
++            ar->arKeepaliveConfigured = 0xFF;
++            if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){
++                up(&ar->arSem);
++                return -EIO;
++            }
++            wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ);
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            }
++
++            if (!ret) {
++                getKeepAlive.configured = ar->arKeepaliveConfigured;
++            }
++            if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) {
++               ret = -EFAULT;
++            }
++            up(&ar->arSem);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_APPIE:
++        {
++            WMI_SET_APPIE_CMD appIEcmd;
++            A_UINT8           appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN];
++            A_UINT32            fType,ieLen;
++
++	    if (ar->arWmiReady == FALSE) {
++		    return -EIO;
++	    }
++	    get_user(fType, (A_UINT32 *)userdata);
++	    appIEcmd.mgmtFrmType = fType;
++	    if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) {
++		    ret = -EIO;
++	    } else {
++		    get_user(ieLen, (A_UINT32 *)(userdata + 4));
++		    appIEcmd.ieLen = ieLen;
++		    if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) {
++			    ret = -EIO;
++			    break;
++		    }
++		    if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) {
++			    ret = -EFAULT;
++		    } else {
++			    if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType,
++						  appIEcmd.ieLen,  appIeInfo) != A_OK)
++			    {
++				    ret = -EIO;
++			    }
++		    }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER:
++        {
++            WMI_BSS_FILTER_CMD cmd;
++            A_UINT32    filterType;
++
++            if (copy_from_user(&filterType, userdata, sizeof(A_UINT32)))
++            {
++                return -EFAULT;
++            }
++            if (filterType & (IEEE80211_FILTER_TYPE_BEACON |
++                                    IEEE80211_FILTER_TYPE_PROBE_RESP))
++            {
++                cmd.bssFilter = ALL_BSS_FILTER;
++            } else {
++                cmd.bssFilter = NONE_BSS_FILTER;
++            }
++            if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) {
++                ret = -EIO;
++            }
++
++            AR6000_SPIN_LOCK(&ar->arLock, 0);
++            ar->arMgmtFilter = filterType;
++            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WSC_STATUS:
++        {
++            A_UINT32    wsc_status;
++
++            if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32)))
++            {
++                return -EFAULT;
++            }
++            if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) {
++                ret = -EIO;
++            }
++            break;
++        }
++        case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL:
++        {
++            A_UINT32 ROM_addr;
++            A_UINT32 RAM_addr;
++            A_UINT32 nbytes;
++            A_UINT32 do_activate;
++            A_UINT32 rompatch_id;
++
++            get_user(ROM_addr, (A_UINT32 *)userdata);
++            get_user(RAM_addr, (A_UINT32 *)userdata + 1);
++            get_user(nbytes, (A_UINT32 *)userdata + 2);
++            get_user(do_activate, (A_UINT32 *)userdata + 3);
++            AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x  length: %d\n",
++                             ROM_addr, RAM_addr, nbytes);
++            ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr,
++                                        nbytes, do_activate, &rompatch_id);
++            if (ret == A_OK) {
++                put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL:
++        {
++            A_UINT32 rompatch_id;
++
++            get_user(rompatch_id, (A_UINT32 *)userdata);
++            AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id);
++            ret = BMIrompatchUninstall(hifDevice, rompatch_id);
++            break;
++        }
++
++        case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE:
++        case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE:
++        {
++            A_UINT32 rompatch_count;
++
++            get_user(rompatch_count, (A_UINT32 *)userdata);
++            AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count);
++            length = sizeof(A_UINT32) * rompatch_count;
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length))
++                {
++                    ret = -EFAULT;
++                } else {
++                    if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) {
++                        ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
++                    } else {
++                        ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
++                    }
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++
++            break;
++        }
++
++        case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE:
++        {
++            WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setHostSleepMode, userdata,
++                                      sizeof(setHostSleepMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_host_sleep_mode_cmd(ar->arWmi,
++                                &setHostSleepMode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WOW_MODE:
++        {
++            WMI_SET_WOW_MODE_CMD setWowMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setWowMode, userdata,
++                                      sizeof(setWowMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_wow_mode_cmd(ar->arWmi,
++                                &setWowMode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_WOW_LIST:
++        {
++            WMI_GET_WOW_LIST_CMD getWowList;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&getWowList, userdata,
++                                      sizeof(getWowList)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_get_wow_list_cmd(ar->arWmi,
++                                &getWowList) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN:
++        {
++#define WOW_PATTERN_SIZE 64
++#define WOW_MASK_SIZE 64
++
++            WMI_ADD_WOW_PATTERN_CMD cmd;
++            A_UINT8 mask_data[WOW_PATTERN_SIZE]={0};
++            A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0};
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++
++                if(copy_from_user(&cmd, userdata,
++                            sizeof(WMI_ADD_WOW_PATTERN_CMD)))
++                      return -EFAULT;
++                if (copy_from_user(pattern_data,
++                                      userdata + 3,
++                                      cmd.filter_size)){
++                        ret = -EFAULT;
++                        break;
++                }
++                if (copy_from_user(mask_data,
++                                      (userdata + 3 + cmd.filter_size),
++                                      cmd.filter_size)){
++                        ret = -EFAULT;
++                        break;
++                } else {
++                    if (wmi_add_wow_pattern_cmd(ar->arWmi,
++                                &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){
++                        ret = -EIO;
++                    }
++                }
++            }
++#undef WOW_PATTERN_SIZE
++#undef WOW_MASK_SIZE
++            break;
++        }
++        case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN:
++        {
++            WMI_DEL_WOW_PATTERN_CMD delWowPattern;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&delWowPattern, userdata,
++                                      sizeof(delWowPattern)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_del_wow_pattern_cmd(ar->arWmi,
++                                &delWowPattern) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE:
++            if (ar->arHtcTarget != NULL) {
++                HTCDumpCreditStates(ar->arHtcTarget);
++            }
++            break;
++        case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE:
++            if (ar->arHtcTarget != NULL) {
++                struct ar6000_traffic_activity_change data;
++
++                if (copy_from_user(&data, userdata, sizeof(data)))
++                {
++                    return -EFAULT;
++                }
++                    /* note, this is used for testing (mbox ping testing), indicate activity
++                     * change using the stream ID as the traffic class */
++                ar6000_indicate_tx_activity(ar,
++                                            (A_UINT8)data.StreamID,
++                                            data.Active ? TRUE : FALSE);
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&connectCtrlFlags, userdata,
++                                      sizeof(connectCtrlFlags)))
++            {
++                ret = -EFAULT;
++            } else {
++                ar->arConnectCtrlFlags = connectCtrlFlags;
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&akmpParams, userdata,
++                                      sizeof(WMI_SET_AKMP_PARAMS_CMD)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_PMKID_LIST:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++                if (copy_from_user(&pmkidInfo.numPMKID, userdata,
++                                      sizeof(pmkidInfo.numPMKID)))
++                {
++                    ret = -EFAULT;
++                    break;
++                }
++                if (copy_from_user(&pmkidInfo.pmkidList,
++                                   userdata + sizeof(pmkidInfo.numPMKID),
++                                   pmkidInfo.numPMKID * sizeof(WMI_PMKID)))
++                {
++                    ret = -EFAULT;
++                    break;
++                }
++                if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_GET_PMKID_LIST:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else  {
++                if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        default:
++            ret = -EOPNOTSUPP;
++    }
++    return ret;
++}
++
+diff --git a/drivers/ar6000/ar6000/netbuf.c b/drivers/ar6000/ar6000/netbuf.c
+new file mode 100644
+index 0000000..97b273b
+--- /dev/null
++++ b/drivers/ar6000/ar6000/netbuf.c
+@@ -0,0 +1,225 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/skbuff.h>
++#include <a_config.h>
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "htc_packet.h"
++
++#define AR6000_DATA_OFFSET    64
++
++void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt)
++{
++    skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt);
++}
++
++void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt)
++{
++    skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt);
++}
++
++void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q)
++{
++    return((void *) skb_dequeue((struct sk_buff_head *) q));
++}
++
++int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q)
++{
++    return(skb_queue_len((struct sk_buff_head *) q));
++}
++
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q)
++{
++    return(skb_queue_empty((struct sk_buff_head *) q));
++}
++
++void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q)
++{
++    skb_queue_head_init((struct sk_buff_head *) q);
++}
++
++void *
++a_netbuf_alloc(int size)
++{
++    struct sk_buff *skb;
++    skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size);
++    skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET));
++    return ((void *)skb);
++}
++
++/*
++ * Allocate an SKB w.o. any encapsulation requirement.
++ */
++void *
++a_netbuf_alloc_raw(int size)
++{
++    struct sk_buff *skb;
++
++    skb = dev_alloc_skb(size);
++
++    return ((void *)skb);
++}
++
++void
++a_netbuf_free(void *bufPtr)
++{
++    struct sk_buff *skb = (struct sk_buff *)bufPtr;
++
++    dev_kfree_skb(skb);
++}
++
++A_UINT32
++a_netbuf_to_len(void *bufPtr)
++{
++    return (((struct sk_buff *)bufPtr)->len);
++}
++
++void *
++a_netbuf_to_data(void *bufPtr)
++{
++    return (((struct sk_buff *)bufPtr)->data);
++}
++
++/*
++ * Add len # of bytes to the beginning of the network buffer
++ * pointed to by bufPtr
++ */
++A_STATUS
++a_netbuf_push(void *bufPtr, A_INT32 len)
++{
++    skb_push((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the beginning of the network buffer
++ * pointed to by bufPtr and also fill with data
++ */
++A_STATUS
++a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len)
++{
++    skb_push((struct sk_buff *) bufPtr, len);
++    A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the end of the network buffer
++ * pointed to by bufPtr
++ */
++A_STATUS
++a_netbuf_put(void *bufPtr, A_INT32 len)
++{
++    skb_put((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the end of the network buffer
++ * pointed to by bufPtr and also fill with data
++ */
++A_STATUS
++a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len)
++{
++    char *start = ((struct sk_buff *)bufPtr)->data +
++        ((struct sk_buff *)bufPtr)->len;
++    skb_put((struct sk_buff *)bufPtr, len);
++    A_MEMCPY(start, srcPtr, len);
++
++    return A_OK;
++}
++
++
++/*
++ * Trim the network buffer pointed to by bufPtr to len # of bytes
++ */
++A_STATUS
++a_netbuf_setlen(void *bufPtr, A_INT32 len)
++{
++    skb_trim((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Chop of len # of bytes from the end of the buffer.
++ */
++A_STATUS
++a_netbuf_trim(void *bufPtr, A_INT32 len)
++{
++    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
++
++    return A_OK;
++}
++
++/*
++ * Chop of len # of bytes from the end of the buffer and return the data.
++ */
++A_STATUS
++a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len)
++{
++    char *start = ((struct sk_buff *)bufPtr)->data +
++        (((struct sk_buff *)bufPtr)->len - len);
++
++    A_MEMCPY(dstPtr, start, len);
++    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
++
++    return A_OK;
++}
++
++
++/*
++ * Returns the number of bytes available to a a_netbuf_push()
++ */
++A_INT32
++a_netbuf_headroom(void *bufPtr)
++{
++    return (skb_headroom((struct sk_buff *)bufPtr));
++}
++
++/*
++ * Removes specified number of bytes from the beginning of the buffer
++ */
++A_STATUS
++a_netbuf_pull(void *bufPtr, A_INT32 len)
++{
++    skb_pull((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Removes specified number of bytes from the beginning of the buffer
++ * and return the data
++ */
++A_STATUS
++a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len)
++{
++    A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len);
++    skb_pull((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
+diff --git a/drivers/ar6000/ar6000/osapi_linux.h b/drivers/ar6000/ar6000/osapi_linux.h
+new file mode 100644
+index 0000000..5b64212
+--- /dev/null
++++ b/drivers/ar6000/ar6000/osapi_linux.h
+@@ -0,0 +1,319 @@
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _OSAPI_LINUX_H_
++#define _OSAPI_LINUX_H_
++
++#ifdef __KERNEL__
++
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/jiffies.h>
++#endif
++#include <linux/timer.h>
++#include <linux/delay.h>
++#include <linux/wait.h>
++#ifdef KERNEL_2_4
++#include <asm/arch/irq.h>
++#include <asm/irq.h>
++#endif
++
++#ifdef __GNUC__
++#define __ATTRIB_PACK           __attribute__ ((packed))
++#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
++#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
++#ifndef INLINE
++#define INLINE                  __inline__
++#endif
++#else /* Not GCC */
++#define __ATTRIB_PACK
++#define __ATTRIB_PRINTF
++#define __ATTRIB_NORETURN
++#ifndef INLINE
++#define INLINE                  __inline
++#endif
++#endif /* End __GNUC__ */
++
++#define PREPACK
++#define POSTPACK                __ATTRIB_PACK
++
++/*
++ * Endianes macros
++ */
++#define A_BE2CPU8(x)       ntohb(x)
++#define A_BE2CPU16(x)      ntohs(x)
++#define A_BE2CPU32(x)      ntohl(x)
++
++#define A_LE2CPU8(x)       (x)
++#define A_LE2CPU16(x)      (x)
++#define A_LE2CPU32(x)      (x)
++
++#define A_CPU2BE8(x)       htonb(x)
++#define A_CPU2BE16(x)      htons(x)
++#define A_CPU2BE32(x)      htonl(x)
++
++#define A_MEMCPY(dst, src, len)         memcpy((A_UINT8 *)(dst), (src), (len))
++#define A_MEMZERO(addr, len)            memset(addr, 0, len)
++#define A_MEMCMP(addr1, addr2, len)     memcmp((addr1), (addr2), (len))
++#define A_MALLOC(size)                  kmalloc((size), GFP_KERNEL)
++#define A_MALLOC_NOWAIT(size)           kmalloc((size), GFP_ATOMIC)
++#define A_FREE(addr)                    kfree(addr)
++#define A_PRINTF(args...)               printk(args)
++
++/* Mutual Exclusion */
++typedef spinlock_t                      A_MUTEX_T;
++#define A_MUTEX_INIT(mutex)             spin_lock_init(mutex)
++#define A_MUTEX_LOCK(mutex)             spin_lock_bh(mutex)
++#define A_MUTEX_UNLOCK(mutex)           spin_unlock_bh(mutex)
++#define A_IS_MUTEX_VALID(mutex)         TRUE  /* okay to return true, since A_MUTEX_DELETE does nothing */
++#define A_MUTEX_DELETE(mutex)           /* spin locks are not kernel resources so nothing to free.. */
++
++/* Get current time in ms adding a constant offset (in ms) */
++#define A_GET_MS(offset)    \
++	(jiffies + ((offset) / 1000) * HZ)
++
++/*
++ * Timer Functions
++ */
++#define A_MDELAY(msecs)                 mdelay(msecs)
++typedef struct timer_list               A_TIMER;
++
++#define A_INIT_TIMER(pTimer, pFunction, pArg) do {              \
++    init_timer(pTimer);                                         \
++    (pTimer)->function = (pFunction);                           \
++    (pTimer)->data   = (unsigned long)(pArg);                   \
++} while (0)
++
++/*
++ * Start a Timer that elapses after 'periodMSec' milli-seconds
++ * Support is provided for a one-shot timer. The 'repeatFlag' is
++ * ignored.
++ */
++#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do {                   \
++    if (repeatFlag) {                                                       \
++        printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__);     \
++        panic("Timer Repeat");                                              \
++    }                                                                       \
++    mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000);                \
++} while (0)
++
++/*
++ * Cancel the Timer.
++ */
++#define A_UNTIMEOUT(pTimer) do {                                \
++    del_timer((pTimer));                                        \
++} while (0)
++
++#define A_DELETE_TIMER(pTimer) do {                             \
++} while (0)
++
++/*
++ * Wait Queue related functions
++ */
++typedef wait_queue_head_t               A_WAITQUEUE_HEAD;
++#define A_INIT_WAITQUEUE_HEAD(head)     init_waitqueue_head(head)
++#ifndef wait_event_interruptible_timeout
++#define __wait_event_interruptible_timeout(wq, condition, ret)          \
++do {                                                                    \
++        wait_queue_t __wait;                                            \
++        init_waitqueue_entry(&__wait, current);                         \
++                                                                        \
++        add_wait_queue(&wq, &__wait);                                   \
++        for (;;) {                                                      \
++                set_current_state(TASK_INTERRUPTIBLE);                  \
++                if (condition)                                          \
++                        break;                                          \
++                if (!signal_pending(current)) {                         \
++                        ret = schedule_timeout(ret);                    \
++                        if (!ret)                                       \
++                                break;                                  \
++                        continue;                                       \
++                }                                                       \
++                ret = -ERESTARTSYS;                                     \
++                break;                                                  \
++        }                                                               \
++        current->state = TASK_RUNNING;                                  \
++        remove_wait_queue(&wq, &__wait);                                \
++} while (0)
++
++#define wait_event_interruptible_timeout(wq, condition, timeout)        \
++({                                                                      \
++        long __ret = timeout;                                           \
++        if (!(condition))                                               \
++                __wait_event_interruptible_timeout(wq, condition, __ret); \
++        __ret;                                                          \
++})
++#endif /* wait_event_interruptible_timeout */
++
++#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \
++    wait_event_interruptible_timeout(head, condition, timeout); \
++} while (0)
++
++#define A_WAKE_UP(head)                 wake_up(head)
++
++#ifdef DEBUG
++#define A_ASSERT(expr)  \
++    if (!(expr)) {   \
++        printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
++        panic(#expr); \
++    }
++
++#else
++#define A_ASSERT(expr)
++#endif /* DEBUG */
++
++/*
++ * Initialization of the network buffer subsystem
++ */
++#define A_NETBUF_INIT()
++
++/*
++ * Network buffer queue support
++ */
++typedef struct sk_buff_head A_NETBUF_QUEUE_T;
++
++#define A_NETBUF_QUEUE_INIT(q)  \
++    a_netbuf_queue_init(q)
++
++#define A_NETBUF_ENQUEUE(q, pkt) \
++    a_netbuf_enqueue((q), (pkt))
++#define A_NETBUF_PREQUEUE(q, pkt) \
++    a_netbuf_prequeue((q), (pkt))
++#define A_NETBUF_DEQUEUE(q) \
++    (a_netbuf_dequeue(q))
++#define A_NETBUF_QUEUE_SIZE(q)  \
++    a_netbuf_queue_size(q)
++#define A_NETBUF_QUEUE_EMPTY(q) \
++    a_netbuf_queue_empty(q)
++
++/*
++ * Network buffer support
++ */
++#define A_NETBUF_ALLOC(size) \
++    a_netbuf_alloc(size)
++#define A_NETBUF_ALLOC_RAW(size) \
++    a_netbuf_alloc_raw(size)
++#define A_NETBUF_FREE(bufPtr) \
++    a_netbuf_free(bufPtr)
++#define A_NETBUF_DATA(bufPtr) \
++    a_netbuf_to_data(bufPtr)
++#define A_NETBUF_LEN(bufPtr) \
++    a_netbuf_to_len(bufPtr)
++#define A_NETBUF_PUSH(bufPtr, len) \
++    a_netbuf_push(bufPtr, len)
++#define A_NETBUF_PUT(bufPtr, len) \
++    a_netbuf_put(bufPtr, len)
++#define A_NETBUF_TRIM(bufPtr,len) \
++    a_netbuf_trim(bufPtr, len)
++#define A_NETBUF_PULL(bufPtr, len) \
++    a_netbuf_pull(bufPtr, len)
++#define A_NETBUF_HEADROOM(bufPtr)\
++    a_netbuf_headroom(bufPtr)
++#define A_NETBUF_SETLEN(bufPtr,len) \
++    a_netbuf_setlen(bufPtr, len)
++
++/* Add data to end of a buffer  */
++#define A_NETBUF_PUT_DATA(bufPtr, srcPtr,  len) \
++    a_netbuf_put_data(bufPtr, srcPtr, len)
++
++/* Add data to start of the  buffer */
++#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr,  len) \
++    a_netbuf_push_data(bufPtr, srcPtr, len)
++
++/* Remove data at start of the buffer */
++#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \
++    a_netbuf_pull_data(bufPtr, dstPtr, len)
++
++/* Remove data from the end of the buffer */
++#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \
++    a_netbuf_trim_data(bufPtr, dstPtr, len)
++
++/* View data as "size" contiguous bytes of type "t" */
++#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \
++    (t )( ((struct skbuf *)(bufPtr))->data)
++
++/* return the beginning of the headroom for the buffer */
++#define A_NETBUF_HEAD(bufPtr) \
++        ((((struct sk_buff *)(bufPtr))->head))
++
++/*
++ * OS specific network buffer access routines
++ */
++void *a_netbuf_alloc(int size);
++void *a_netbuf_alloc_raw(int size);
++void a_netbuf_free(void *bufPtr);
++void *a_netbuf_to_data(void *bufPtr);
++A_UINT32 a_netbuf_to_len(void *bufPtr);
++A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len);
++A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len);
++A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len);
++A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len);
++A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len);
++A_INT32 a_netbuf_headroom(void *bufPtr);
++void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt);
++void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt);
++void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
++void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q);
++
++/*
++ * Kernel v.s User space functions
++ */
++A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n);
++A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n);
++
++#else /* __KERNEL__ */
++
++#ifdef __GNUC__
++#define __ATTRIB_PACK           __attribute__ ((packed))
++#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
++#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
++#ifndef INLINE
++#define INLINE                  __inline__
++#endif
++#else /* Not GCC */
++#define __ATTRIB_PACK
++#define __ATTRIB_PRINTF
++#define __ATTRIB_NORETURN
++#ifndef INLINE
++#define INLINE                  __inline
++#endif
++#endif /* End __GNUC__ */
++
++#define PREPACK
++#define POSTPACK                __ATTRIB_PACK
++
++#endif /* __KERNEL__ */
++
++#endif /* _OSAPI_LINUX_H_ */
+diff --git a/drivers/ar6000/ar6000/wireless_ext.c b/drivers/ar6000/ar6000/wireless_ext.c
+new file mode 100644
+index 0000000..af78ae0
+--- /dev/null
++++ b/drivers/ar6000/ar6000/wireless_ext.c
+@@ -0,0 +1,1979 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi);
++extern unsigned int wmitimeout;
++extern A_WAITQUEUE_HEAD arEvent;
++extern wait_queue_head_t ar6000_scan_queue;
++
++/*
++ * Encode a WPA or RSN information element as a custom
++ * element using the hostap format.
++ */
++static u_int
++encode_ie(void *buf, size_t bufsize,
++    const u_int8_t *ie, size_t ielen,
++    const char *leader, size_t leader_len)
++{
++    u_int8_t *p;
++    int i;
++
++    if (bufsize < leader_len)
++        return 0;
++    p = buf;
++    memcpy(p, leader, leader_len);
++    bufsize -= leader_len;
++    p += leader_len;
++    for (i = 0; i < ielen && bufsize > 2; i++)
++        p += sprintf(p, "%02x", ie[i]);
++    return (i == ielen ? p - (u_int8_t *)buf : 0);
++}
++
++void
++ar6000_scan_node(void *arg, bss_t *ni)
++{
++    struct iw_event iwe;
++#if WIRELESS_EXT > 14
++    char buf[64*2 + 30];
++#endif
++    struct ar_giwscan_param *param;
++    A_CHAR *current_ev;
++    A_CHAR *end_buf;
++    struct ieee80211_common_ie  *cie;
++	struct iw_request_info info;
++
++	info.cmd = 0;
++	info.flags = 0;
++
++    param = (struct ar_giwscan_param *)arg;
++
++    if (param->current_ev >= param->end_buf) {
++        return;
++    }
++    if ((param->firstPass == TRUE) &&
++        ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) {
++        /*
++         * Only forward wpa bss's in first pass
++         */
++        return;
++    }
++
++     if ((param->firstPass == FALSE) &&
++        ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) {
++        /*
++         * Only forward non-wpa bss's in 2nd pass
++         */
++        return;
++    }
++
++    current_ev = param->current_ev;
++    end_buf = param->end_buf;
++
++    cie = &ni->ni_cie;
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWAP;
++    iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
++    A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6);
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_ADDR_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWESSID;
++    iwe.u.data.flags = 1;
++    iwe.u.data.length = cie->ie_ssid[1];
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                      &cie->ie_ssid[2]);
++
++    if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) {
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = SIOCGIWMODE;
++        iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ?
++                IW_MODE_MASTER : IW_MODE_ADHOC;
++        current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                          IW_EV_UINT_LEN);
++    }
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWFREQ;
++    iwe.u.freq.m = cie->ie_chan * 100000;
++    iwe.u.freq.e = 1;
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_FREQ_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = IWEVQUAL;
++    ar6000_set_quality(&iwe.u.qual, ni->ni_snr);
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_QUAL_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWENCODE;
++    if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) {
++        iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
++    } else {
++        iwe.u.data.flags = IW_ENCODE_DISABLED;
++    }
++    iwe.u.data.length = 0;
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, "");
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = IWEVCUSTOM;
++    snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt);
++    iwe.u.data.length = strlen(buf);
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf);
++
++    if (cie->ie_wpa != NULL) {
++        static const char wpa_leader[] = "wpa_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa,
++                                      cie->ie_wpa[1]+2,
++                                      wpa_leader, sizeof(wpa_leader)-1);
++
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++									   buf);
++        }
++    }
++
++    if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) {
++        static const char rsn_leader[] = "rsn_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn,
++                                      cie->ie_rsn[1]+2,
++                                      rsn_leader, sizeof(rsn_leader)-1);
++
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++									   buf);
++        }
++    }
++
++    if (cie->ie_wmm != NULL) {
++        static const char wmm_leader[] = "wmm_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm,
++                                      cie->ie_wmm[1]+2,
++                                      wmm_leader, sizeof(wmm_leader)-1);
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++									   buf);
++        }
++    }
++
++    if (cie->ie_ath != NULL) {
++        static const char ath_leader[] = "ath_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath,
++                                      cie->ie_ath[1]+2,
++                                      ath_leader, sizeof(ath_leader)-1);
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++									   buf);
++        }
++    }
++
++    param->current_ev = current_ev;
++}
++
++int
++ar6000_ioctl_giwscan(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_point *data, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ar_giwscan_param param;
++    int i;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    param.current_ev = extra;
++    param.end_buf = extra + IW_SCAN_MAX_DATA;
++    param.firstPass = TRUE;
++
++    /*
++     * Do two passes to insure WPA scan candidates
++     * are sorted to the front.  This is a hack to deal with
++     * the wireless extensions capping scan results at
++     * IW_SCAN_MAX_DATA bytes.  In densely populated environments
++     * it's easy to overflow this buffer (especially with WPA/RSN
++     * information elements).  Note this sorting hack does not
++     * guarantee we won't overflow anyway.
++     */
++    for (i = 0; i < 2; i++) {
++        /*
++         * Translate data to WE format.
++         */
++        wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, &param);
++        param.firstPass = FALSE;
++        if (param.current_ev >= param.end_buf) {
++            data->length = param.current_ev - extra;
++            return -E2BIG;
++        }
++    }
++
++    data->length = param.current_ev - extra;
++    return 0;
++}
++
++extern int reconnect_flag;
++/* SIOCSIWESSID */
++static int
++ar6000_ioctl_siwessid(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *ssid)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_STATUS status;
++    A_UINT8     arNetworkType;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    /*
++     * iwconfig passes a string with length excluding any trailing NUL.
++     * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall
++     * over badly if we do. So we limit the ESSID to 31 bytes.
++     */
++    if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) {
++        /*
++         * ssid is invalid
++         */
++        return -EINVAL;
++    }
++    /* Added for bug 25178, return an IOCTL error instead of target returning
++       Illegal parameter error when either the BSSID or channel is missing
++       and we cannot scan during connect.
++     */
++    if (data->flags) {
++        if (ar->arSkipScan == TRUE &&
++            (ar->arChannelHint == 0 ||
++             (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] &&
++              !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5])))
++        {
++            return -EINVAL;
++        }
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++
++    if (ar->arTxPending[WMI_CONTROL_PRI]) {
++        /*
++         * sleep until the command queue drains
++         */
++        wait_event_interruptible_timeout(arEvent,
++            ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ);
++        if (signal_pending(current)) {
++            return -EINTR;
++        }
++    }
++
++    if (!data->flags) {
++        arNetworkType = ar->arNetworkType;
++        ar6000_init_profile_info(ar);
++        ar->arNetworkType = arNetworkType;
++    }
++
++    /*
++     * The original logic here prevented a disconnect if issuing an "essid off"
++     * if no ESSID was set, presumably to prevent sending multiple disconnects
++     * to the WMI.
++     *
++     * Unfortunately, this also meant that no disconnect was sent when we were
++     * already connected, but the profile has been changed since (which also
++     * clears the ESSID as a reminder that the WMI needs updating.)
++     *
++     * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't
++     * seem to mind being sent multiple disconnects.
++     */
++    if (1 || (ar->arSsidLen) || (!data->flags))
++    {
++        if ((!data->flags) ||
++            (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) ||
++            (ar->arSsidLen != (data->length)))
++        {
++            /*
++             * SSID set previously or essid off has been issued.
++             *
++             * Disconnect Command is issued in two cases after wmi is ready
++             * (1) ssid is different from the previous setting
++             * (2) essid off has been issued
++             *
++             */
++            if (ar->arWmiReady == TRUE) {
++                reconnect_flag = 0;
++                status = wmi_disconnect_cmd(ar->arWmi);
++                A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++                ar->arSsidLen = 0;
++                if (ar->arSkipScan == FALSE) {
++                    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++                }
++                if (!data->flags) {
++                    up(&ar->arSem);
++                    return 0;
++                }
++            } else {
++                 up(&ar->arSem);
++            }
++        }
++        else
++        {
++            /*
++             * SSID is same, so we assume profile hasn't changed.
++             * If the interface is up and wmi is ready, we issue
++             * a reconnect cmd. Issue a reconnect only we are already
++             * connected.
++             */
++            if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE))
++            {
++                reconnect_flag = TRUE;
++                status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
++                                           ar->arChannelHint);
++                up(&ar->arSem);
++                if (status != A_OK) {
++                    return -EIO;
++                }
++                return 0;
++            }
++            else{
++                /*
++                 * Dont return if connect is pending.
++                 */
++                if(!(ar->arConnectPending)) {
++                    up(&ar->arSem);
++                    return 0;
++                }
++            }
++        }
++    }
++
++    ar->arSsidLen = data->length;
++    A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen);
++
++    /* The ssid length check prevents second "essid off" from the user,
++       to be treated as a connect cmd. The second "essid off" is ignored.
++    */
++    if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) )
++    {
++        AR6000_SPIN_LOCK(&ar->arLock, 0);
++        if (SHARED_AUTH == ar->arDot11AuthMode) {
++            ar6000_install_static_wep_keys(ar);
++        }
++        AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\
++                        " PW crypto %d PW crypto Len %d GRP crypto %d"\
++                        " GRP crypto Len %d\n",
++                        ar->arAuthMode, ar->arDot11AuthMode,
++                        ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
++                        ar->arGroupCrypto, ar->arGroupCryptoLen);
++        reconnect_flag = 0;
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
++                                 ar->arDot11AuthMode, ar->arAuthMode,
++                                 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
++                                 ar->arGroupCrypto,ar->arGroupCryptoLen,
++                                 ar->arSsidLen, ar->arSsid,
++                                 ar->arReqBssid, ar->arChannelHint,
++                                 ar->arConnectCtrlFlags);
++
++
++        up(&ar->arSem);
++
++        if (status != A_OK) {
++            return -EIO;
++        }
++        ar->arConnectPending = TRUE;
++    }else{
++      up(&ar->arSem);
++    }
++    return 0;
++}
++
++/* SIOCGIWESSID */
++static int
++ar6000_ioctl_giwessid(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *essid)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    data->flags = 1;
++    data->length = ar->arSsidLen;
++    A_MEMCPY(essid, ar->arSsid, ar->arSsidLen);
++
++    return 0;
++}
++
++
++void ar6000_install_static_wep_keys(AR_SOFTC_T *ar)
++{
++    A_UINT8 index;
++    A_UINT8 keyUsage;
++
++    for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
++        if (ar->arWepKeyList[index].arKeyLen) {
++            keyUsage = GROUP_USAGE;
++            if (index == ar->arDefTxKeyIndex) {
++                keyUsage |= TX_USAGE;
++            }
++            wmi_addKey_cmd(ar->arWmi,
++                           index,
++                           WEP_CRYPT,
++                           keyUsage,
++                           ar->arWepKeyList[index].arKeyLen,
++                           NULL,
++                           ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL,
++                           NO_SYNC_WMIFLAG);
++        }
++    }
++}
++
++int
++ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return 0;
++}
++
++int
++ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra;
++
++    if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE))
++		return -EIO;
++
++    switch (mlme->im_op) {
++        case IEEE80211_MLME_DISASSOC:
++        case IEEE80211_MLME_DEAUTH:
++            /* Not Supported */
++            break;
++        default:
++            break;
++    }
++    return 0;
++}
++
++
++int
++ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int
++ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info,
++			  struct iw_point *data, char *extra)
++{
++	/* The target generates the WPA/RSN IE */
++	return 0;
++}
++
++int
++ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra;
++    int ret = 0;
++
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) {
++        ar->arDot11AuthMode  = OPEN_AUTH;
++    } else if (req->auth_alg == AUTH_ALG_LEAP) {
++        ar->arDot11AuthMode   = LEAP_AUTH;
++        ar->arPairwiseCrypto  = WEP_CRYPT;
++        ar->arGroupCrypto     = WEP_CRYPT;
++    } else {
++        ret = -EIO;
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    return ret;
++}
++static int
++ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_addpmkid  *req = (struct ieee80211req_addpmkid *)extra;
++    A_STATUS status;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n",
++                    req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2],
++                    req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5],
++                    req->pi_enable);
++
++    status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid,
++                              req->pi_enable);
++
++    if (status != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCSIWRATE
++ */
++int
++ar6000_ioctl_siwrate(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT32  kbps;
++
++    if (rrq->fixed) {
++        kbps = rrq->value / 1000;           /* rrq->value is in bps */
++    } else {
++        kbps = -1;                          /* -1 indicates auto rate */
++    }
++    if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL)
++    {
++        AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps);
++        return -EINVAL;
++    }
++    ar->arBitRate = kbps;
++    if(ar->arWmiReady == TRUE)
++    {
++        if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) {
++            return -EINVAL;
++        }
++    }
++    return 0;
++}
++
++/*
++ * SIOCGIWRATE
++ */
++int
++ar6000_ioctl_giwrate(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        ar->arBitRate = 0xFFFF;
++        if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) {
++            up(&ar->arSem);
++            return -EIO;
++        }
++        wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ);
++        if (signal_pending(current)) {
++            ret = -EINTR;
++        }
++    }
++    /* If the interface is down or wmi is not ready or the target is not
++       connected - return the value stored in the device structure */
++    if (!ret) {
++        if (ar->arBitRate == -1) {
++            rrq->fixed = TRUE;
++            rrq->value = 0;
++        } else {
++            rrq->value = ar->arBitRate * 1000;
++        }
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++/*
++ * SIOCSIWTXPOW
++ */
++static int
++ar6000_ioctl_siwtxpow(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8 dbM;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arRadioSwitch == WLAN_ENABLED
++	&& rrq->disabled) {
++	    if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0)
++		    return -EIO;
++	    ar->arRadioSwitch = WLAN_DISABLED;
++    } else if (ar->arRadioSwitch == WLAN_DISABLED
++	       && !rrq->disabled) {
++	    if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0)
++		    return -EIO;
++	    ar->arRadioSwitch = WLAN_ENABLED;
++    }
++
++    if (rrq->fixed) {
++        if (rrq->flags != IW_TXPOW_DBM) {
++            return -EOPNOTSUPP;
++        }
++        ar->arTxPwr= dbM = rrq->value;
++        ar->arTxPwrSet = TRUE;
++    } else {
++        ar->arTxPwr = dbM = 0;
++        ar->arTxPwrSet = FALSE;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM);
++        wmi_set_txPwr_cmd(ar->arWmi, dbM);
++    }
++    return 0;
++}
++
++/*
++ * SIOCGIWTXPOW
++ */
++int
++ar6000_ioctl_giwtxpow(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arRadioSwitch == WLAN_DISABLED) {
++	    rrq->disabled = 1;
++	    return 0;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE))
++    {
++        ar->arTxPwr = 0;
++
++        if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) {
++            up(&ar->arSem);
++            return -EIO;
++        }
++
++        wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ);
++
++        if (signal_pending(current)) {
++            ret = -EINTR;
++         }
++    }
++   /* If the interace is down or wmi is not ready or target is not connected
++      then return value stored in the device structure */
++
++    if (!ret) {
++         if (ar->arTxPwrSet == TRUE) {
++            rrq->fixed = TRUE;
++        }
++        rrq->value = ar->arTxPwr;
++        rrq->flags = IW_TXPOW_DBM;
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++/*
++ * SIOCSIWRETRY
++ * since iwconfig only provides us with one max retry value, we use it
++ * to apply to data frames of the BE traffic class.
++ */
++static int
++ar6000_ioctl_siwretry(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (rrq->disabled) {
++        return -EOPNOTSUPP;
++    }
++
++    if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) {
++        return -EOPNOTSUPP;
++    }
++
++    if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) {
++            return - EINVAL;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE,
++                                     rrq->value, 0) != A_OK){
++            return -EINVAL;
++        }
++    }
++    ar->arMaxRetries = rrq->value;
++    return 0;
++}
++
++/*
++ * SIOCGIWRETRY
++ */
++static int
++ar6000_ioctl_giwretry(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    rrq->disabled = 0;
++    switch (rrq->flags & IW_RETRY_TYPE) {
++    case IW_RETRY_LIFETIME:
++        return -EOPNOTSUPP;
++        break;
++    case IW_RETRY_LIMIT:
++        rrq->flags = IW_RETRY_LIMIT;
++        switch (rrq->flags & IW_RETRY_MODIFIER) {
++        case IW_RETRY_MIN:
++            rrq->flags |= IW_RETRY_MIN;
++            rrq->value = WMI_MIN_RETRIES;
++            break;
++        case IW_RETRY_MAX:
++            rrq->flags |= IW_RETRY_MAX;
++            rrq->value = ar->arMaxRetries;
++            break;
++        }
++        break;
++    }
++    return 0;
++}
++
++/*
++ * SIOCSIWENCODE
++ */
++static int
++ar6000_ioctl_siwencode(struct net_device *dev,
++              struct iw_request_info *info,
++              struct iw_point *erq, char *keybuf)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int index;
++    A_INT32 auth = ar->arDot11AuthMode;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    index = erq->flags & IW_ENCODE_INDEX;
++
++    if (index && (((index - 1) < WMI_MIN_KEY_INDEX) ||
++                  ((index - 1) > WMI_MAX_KEY_INDEX)))
++    {
++        return -EIO;
++    }
++
++    if (erq->flags & IW_ENCODE_DISABLED) {
++        /*
++         * Encryption disabled
++         */
++        if (index) {
++            /*
++             * If key index was specified then clear the specified key
++             */
++            index--;
++            A_MEMZERO(ar->arWepKeyList[index].arKey,
++                      sizeof(ar->arWepKeyList[index].arKey));
++            ar->arWepKeyList[index].arKeyLen = 0;
++        }
++        ar->arDot11AuthMode       = OPEN_AUTH;
++        ar->arPairwiseCrypto      = NONE_CRYPT;
++        ar->arGroupCrypto         = NONE_CRYPT;
++        ar->arAuthMode            = NONE_AUTH;
++    } else {
++        /*
++         * Enabling WEP encryption
++         */
++        if (index) {
++            index--;                /* keyindex is off base 1 in iwconfig */
++        }
++
++        if (erq->flags & IW_ENCODE_OPEN) {
++            auth = OPEN_AUTH;
++        } else if (erq->flags & IW_ENCODE_RESTRICTED) {
++            auth = SHARED_AUTH;
++        }
++
++        if (erq->length) {
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) {
++                return -EIO;
++            }
++
++            A_MEMZERO(ar->arWepKeyList[index].arKey,
++                      sizeof(ar->arWepKeyList[index].arKey));
++            A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length);
++            ar->arWepKeyList[index].arKeyLen = erq->length;
++        } else {
++            if (ar->arWepKeyList[index].arKeyLen == 0) {
++                return -EIO;
++            }
++            ar->arDefTxKeyIndex = index;
++        }
++
++        ar->arPairwiseCrypto      = WEP_CRYPT;
++        ar->arGroupCrypto         = WEP_CRYPT;
++        ar->arDot11AuthMode       = auth;
++        ar->arAuthMode            = NONE_AUTH;
++    }
++
++    /*
++     * profile has changed.  Erase ssid to signal change
++     */
++    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++    ar->arSsidLen = 0;
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_giwencode(struct net_device *dev,
++              struct iw_request_info *info,
++              struct iw_point *erq, char *key)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8 keyIndex;
++    struct ar_wep_key *wk;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arPairwiseCrypto == NONE_CRYPT) {
++        erq->length = 0;
++        erq->flags = IW_ENCODE_DISABLED;
++    } else {
++        /* get the keyIndex */
++        keyIndex = erq->flags & IW_ENCODE_INDEX;
++        if (0 == keyIndex) {
++            keyIndex = ar->arDefTxKeyIndex;
++        } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) ||
++                   (keyIndex - 1 > WMI_MAX_KEY_INDEX))
++        {
++            keyIndex = WMI_MIN_KEY_INDEX;
++        } else {
++            keyIndex--;
++        }
++        erq->flags = keyIndex + 1;
++        erq->flags |= IW_ENCODE_ENABLED;
++        wk = &ar->arWepKeyList[keyIndex];
++        if (erq->length > wk->arKeyLen) {
++            erq->length = wk->arKeyLen;
++        }
++        if (wk->arKeyLen) {
++            A_MEMCPY(key, wk->arKey, erq->length);
++        }
++        if (ar->arDot11AuthMode == OPEN_AUTH) {
++            erq->flags |= IW_ENCODE_OPEN;
++        } else if (ar->arDot11AuthMode == SHARED_AUTH) {
++            erq->flags |= IW_ENCODE_RESTRICTED;
++        }
++    }
++
++    return 0;
++}
++
++static int ar6000_ioctl_siwpower(struct net_device *dev,
++				 struct iw_request_info *info,
++				 union iwreq_data *wrqu, char *extra)
++{
++	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++	WMI_POWER_MODE power_mode;
++
++	if (wrqu->power.disabled)
++		power_mode = MAX_PERF_POWER;
++	else
++		power_mode = REC_POWER;
++
++	if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0)
++		return -EIO;
++
++	return 0;
++}
++
++static int ar6000_ioctl_giwpower(struct net_device *dev,
++				 struct iw_request_info *info,
++				 union iwreq_data *wrqu, char *extra)
++{
++	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++	/*
++	 * FIXME:
++	 * https://docs.openmoko.org/trac/ticket/2267
++	 * When starting wpa_supplicant the kernel oopses.
++	 * The following condition avoids the oops.
++	 * Remove this comment to bless this solution.
++	 */
++	if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE)
++		return -EIO;
++
++	return wmi_get_power_mode_cmd(ar->arWmi);
++}
++
++static int ar6000_ioctl_siwgenie(struct net_device *dev,
++				 struct iw_request_info *info,
++				 struct iw_point *dwrq,
++				 char *extra)
++{
++	/* The target does that for us */
++	return 0;
++}
++
++static int ar6000_ioctl_giwgenie(struct net_device *dev,
++				 struct iw_request_info *info,
++				 struct iw_point *dwrq,
++				 char *extra)
++{
++	return 0;
++}
++
++static int ar6000_ioctl_siwauth(struct net_device *dev,
++				struct iw_request_info *info,
++				struct iw_param *param,
++				char *extra)
++{
++	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++	int reset = 0;
++
++	switch (param->flags & IW_AUTH_INDEX) {
++	case IW_AUTH_WPA_VERSION:
++		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
++			ar->arAuthMode = NONE_AUTH;
++		}
++		if (param->value & IW_AUTH_WPA_VERSION_WPA) {
++			ar->arAuthMode = WPA_AUTH;
++		}
++		if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
++			ar->arAuthMode = WPA2_AUTH;
++		}
++
++		reset = 1;
++		break;
++	case IW_AUTH_CIPHER_PAIRWISE:
++		if (param->value & IW_AUTH_CIPHER_NONE) {
++			ar->arPairwiseCrypto = NONE_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_WEP40) {
++			ar->arPairwiseCrypto = WEP_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_TKIP) {
++			ar->arPairwiseCrypto = TKIP_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_CCMP) {
++			ar->arPairwiseCrypto = AES_CRYPT;
++		}
++
++		reset = 1;
++		break;
++	case IW_AUTH_CIPHER_GROUP:
++		if (param->value & IW_AUTH_CIPHER_NONE) {
++			ar->arGroupCrypto = NONE_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_WEP40) {
++			ar->arGroupCrypto = WEP_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_TKIP) {
++			ar->arGroupCrypto = TKIP_CRYPT;
++		}
++		if (param->value & IW_AUTH_CIPHER_CCMP) {
++			ar->arGroupCrypto = AES_CRYPT;
++		}
++
++		reset = 1;
++		break;
++	case IW_AUTH_KEY_MGMT:
++		if (param->value & IW_AUTH_KEY_MGMT_PSK) {
++			if (ar->arAuthMode == WPA_AUTH) {
++				ar->arAuthMode = WPA_PSK_AUTH;
++			} else if (ar->arAuthMode == WPA2_AUTH) {
++				ar->arAuthMode = WPA2_PSK_AUTH;
++			}
++
++			reset = 1;
++		}
++		break;
++
++	case IW_AUTH_TKIP_COUNTERMEASURES:
++		if (ar->arWmiReady == FALSE) {
++			return -EIO;
++		}
++		wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value);
++		break;
++
++	case IW_AUTH_DROP_UNENCRYPTED:
++		break;
++
++	case IW_AUTH_80211_AUTH_ALG:
++		if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
++			ar->arDot11AuthMode  = OPEN_AUTH;
++		}
++		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
++			ar->arDot11AuthMode  = SHARED_AUTH;
++		}
++		if (param->value & IW_AUTH_ALG_LEAP) {
++			ar->arDot11AuthMode   = LEAP_AUTH;
++			ar->arPairwiseCrypto  = WEP_CRYPT;
++			ar->arGroupCrypto     = WEP_CRYPT;
++		}
++
++		reset = 1;
++		break;
++
++	case IW_AUTH_WPA_ENABLED:
++		reset = 1;
++		break;
++
++	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
++		break;
++
++	case IW_AUTH_PRIVACY_INVOKED:
++		break;
++
++	default:
++		printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags);
++		return -EOPNOTSUPP;
++	}
++
++	if (reset) {
++		A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++		ar->arSsidLen = 0;
++	}
++
++	return 0;
++}
++
++static int ar6000_ioctl_giwauth(struct net_device *dev,
++				struct iw_request_info *info,
++				struct iw_param *dwrq,
++				char *extra)
++{
++	return 0;
++}
++
++static int ar6000_ioctl_siwencodeext(struct net_device *dev,
++				     struct iw_request_info *info,
++				     union iwreq_data *wrqu,
++				     char *extra)
++{
++	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++	struct iw_point *encoding = &wrqu->encoding;
++	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
++	int alg = ext->alg, idx;
++
++	if (ar->arWlanState == WLAN_DISABLED) {
++		return -EIO;
++	}
++
++	/* Determine and validate the key index */
++	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
++	if (idx) {
++		if (idx < 0 || idx > 3)
++			return -EINVAL;
++	}
++
++	if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) {
++		struct ieee80211req_key ik;
++		KEY_USAGE key_usage;
++		CRYPTO_TYPE key_type = NONE_CRYPT;
++		int status;
++
++		ar->user_saved_keys.keyOk = FALSE;
++
++		if (alg == IW_ENCODE_ALG_TKIP) {
++			key_type = TKIP_CRYPT;
++			ik.ik_type = IEEE80211_CIPHER_TKIP;
++		} else {
++			key_type = AES_CRYPT;
++			ik.ik_type = IEEE80211_CIPHER_AES_CCM;
++		}
++
++		ik.ik_keyix = idx;
++		ik.ik_keylen = ext->key_len;
++		ik.ik_flags = IEEE80211_KEY_RECV;
++		if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
++			ik.ik_flags |= IEEE80211_KEY_XMIT
++				| IEEE80211_KEY_DEFAULT;
++		}
++
++		if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
++			memcpy(&ik.ik_keyrsc, ext->rx_seq, 8);
++		}
++
++		memcpy(ik.ik_keydata, ext->key, ext->key_len);
++
++		ar->user_saved_keys.keyType = key_type;
++		if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
++			key_usage = GROUP_USAGE;
++			memset(ik.ik_macaddr, 0, ETH_ALEN);
++			memcpy(&ar->user_saved_keys.bcast_ik, &ik,
++			       sizeof(struct ieee80211req_key));
++		} else {
++			key_usage = PAIRWISE_USAGE;
++			memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN);
++			memcpy(&ar->user_saved_keys.ucast_ik, &ik,
++			       sizeof(struct ieee80211req_key));
++		}
++
++		status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type,
++					key_usage, ik.ik_keylen,
++					(A_UINT8 *)&ik.ik_keyrsc,
++					ik.ik_keydata,
++					KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG);
++
++		if (status < 0)
++			return -EIO;
++
++		ar->user_saved_keys.keyOk = TRUE;
++
++		return 0;
++
++	} else {
++		/* WEP falls back to SIWENCODE */
++		return -EOPNOTSUPP;
++	}
++
++	return 0;
++}
++
++
++static int ar6000_ioctl_giwencodeext(struct net_device *dev,
++				     struct iw_request_info *info,
++				     struct iw_point *dwrq,
++				     char *extra)
++{
++	return 0;
++}
++
++
++static int
++ar6000_ioctl_setparam(struct net_device *dev,
++                      struct iw_request_info *info,
++                      void *erq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int *i = (int *)extra;
++    int param = i[0];
++    int value = i[1];
++    int ret = 0;
++    A_BOOL profChanged = FALSE;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (param) {
++        case IEEE80211_PARAM_WPA:
++            switch (value) {
++                case WPA_MODE_WPA1:
++                    ar->arAuthMode = WPA_AUTH;
++                    profChanged    = TRUE;
++                    break;
++                case WPA_MODE_WPA2:
++                    ar->arAuthMode = WPA2_AUTH;
++                    profChanged    = TRUE;
++                    break;
++                case WPA_MODE_NONE:
++                    ar->arAuthMode = NONE_AUTH;
++                    profChanged    = TRUE;
++                    break;
++	    default:
++		    printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value);
++            }
++            break;
++        case IEEE80211_PARAM_AUTHMODE:
++            switch(value) {
++                case IEEE80211_AUTH_WPA_PSK:
++                    if (WPA_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA_PSK_AUTH;
++                        profChanged    = TRUE;
++                    } else if (WPA2_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA2_PSK_AUTH;
++                        profChanged    = TRUE;
++                    } else {
++                        AR_DEBUG_PRINTF("Error -  Setting PSK mode when WPA "\
++                                        "param was set to %d\n",
++                                        ar->arAuthMode);
++                        ret = -1;
++                    }
++                    break;
++                case IEEE80211_AUTH_WPA_CCKM:
++                    if (WPA2_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA2_AUTH_CCKM;
++                    } else {
++                        ar->arAuthMode = WPA_AUTH_CCKM;
++                    }
++                    break;
++                default:
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_UCASTCIPHER:
++            switch (value) {
++                case IEEE80211_CIPHER_AES_CCM:
++                    ar->arPairwiseCrypto = AES_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_TKIP:
++                    ar->arPairwiseCrypto = TKIP_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_WEP:
++                    ar->arPairwiseCrypto = WEP_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_NONE:
++                    ar->arPairwiseCrypto = NONE_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_UCASTKEYLEN:
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
++                ret = -EIO;
++            } else {
++                ar->arPairwiseCryptoLen = value;
++            }
++            break;
++        case IEEE80211_PARAM_MCASTCIPHER:
++            switch (value) {
++                case IEEE80211_CIPHER_AES_CCM:
++                    ar->arGroupCrypto = AES_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_TKIP:
++                    ar->arGroupCrypto = TKIP_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_WEP:
++                    ar->arGroupCrypto = WEP_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_NONE:
++                    ar->arGroupCrypto = NONE_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_MCASTKEYLEN:
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
++                ret = -EIO;
++            } else {
++                ar->arGroupCryptoLen = value;
++            }
++            break;
++        case IEEE80211_PARAM_COUNTERMEASURES:
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            wmi_set_tkip_countermeasures_cmd(ar->arWmi, value);
++            break;
++        default:
++            break;
++    }
++
++    if (profChanged == TRUE) {
++        /*
++         * profile has changed.  Erase ssid to signal change
++         */
++	A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++	ar->arSsidLen = 0;
++    }
++
++    return ret;
++}
++
++int
++ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info,
++            void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int
++ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info,
++		    void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_key *ik = (struct ieee80211req_key *)extra;
++    KEY_USAGE keyUsage;
++    A_STATUS status;
++    CRYPTO_TYPE keyType = NONE_CRYPT;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    ar->user_saved_keys.keyOk = FALSE;
++
++    if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00",
++                     IEEE80211_ADDR_LEN)) {
++        keyUsage = GROUP_USAGE;
++        A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik,
++                 sizeof(struct ieee80211req_key));
++    } else {
++        keyUsage = PAIRWISE_USAGE;
++        A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik,
++                 sizeof(struct ieee80211req_key));
++    }
++
++    switch (ik->ik_type) {
++        case IEEE80211_CIPHER_WEP:
++            keyType = WEP_CRYPT;
++            break;
++        case IEEE80211_CIPHER_TKIP:
++            keyType = TKIP_CRYPT;
++            break;
++        case IEEE80211_CIPHER_AES_CCM:
++            keyType = AES_CRYPT;
++            break;
++        default:
++            break;
++    }
++    ar->user_saved_keys.keyType = keyType;
++
++    if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            return -EIO;
++        }
++
++        status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage,
++                                ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
++                                ik->ik_keydata, KEY_OP_INIT_VAL,
++                                SYNC_BEFORE_WMIFLAG);
++
++        if (status != A_OK) {
++            return -EIO;
++        }
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata);
++    }
++
++    ar->user_saved_keys.keyOk = TRUE;
++
++    return 0;
++}
++
++
++/*
++ * SIOCGIWNAME
++ */
++int
++ar6000_ioctl_giwname(struct net_device *dev,
++           struct iw_request_info *info,
++           char *name, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (ar->arPhyCapability) {
++    case (WMI_11A_CAPABILITY):
++        strncpy(name, "AR6000 802.11a", IFNAMSIZ);
++        break;
++    case (WMI_11G_CAPABILITY):
++        strncpy(name, "AR6000 802.11g", IFNAMSIZ);
++        break;
++    case (WMI_11AG_CAPABILITY):
++        strncpy(name, "AR6000 802.11ag", IFNAMSIZ);
++        break;
++    default:
++        strncpy(name, "AR6000 802.11", IFNAMSIZ);
++        break;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCSIWFREQ
++ */
++int
++ar6000_ioctl_siwfreq(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_freq *freq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    /*
++     * We support limiting the channels via wmiconfig.
++     *
++     * We use this command to configure the channel hint for the connect cmd
++     * so it is possible the target will end up connecting to a different
++     * channel.
++     */
++    if (freq->e > 1) {
++        return -EINVAL;
++    } else if (freq->e == 1) {
++        ar->arChannelHint = freq->m / 100000;
++    } else {
++        ar->arChannelHint = wlan_ieee2freq(freq->m);
++    }
++
++    A_PRINTF("channel hint set to %d\n", ar->arChannelHint);
++    return 0;
++}
++
++/*
++ * SIOCGIWFREQ
++ */
++int
++ar6000_ioctl_giwfreq(struct net_device *dev,
++                struct iw_request_info *info,
++                struct iw_freq *freq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arConnected != TRUE) {
++        return -EINVAL;
++    }
++
++    freq->m = ar->arBssChannel * 100000;
++    freq->e = 1;
++
++    return 0;
++}
++
++/*
++ * SIOCSIWMODE
++ */
++int
++ar6000_ioctl_siwmode(struct net_device *dev,
++            struct iw_request_info *info,
++            __u32 *mode, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (*mode) {
++    case IW_MODE_INFRA:
++        ar->arNetworkType = INFRA_NETWORK;
++        break;
++    case IW_MODE_ADHOC:
++        ar->arNetworkType = ADHOC_NETWORK;
++        break;
++    default:
++        return -EINVAL;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCGIWMODE
++ */
++int
++ar6000_ioctl_giwmode(struct net_device *dev,
++            struct iw_request_info *info,
++            __u32 *mode, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (ar->arNetworkType) {
++    case INFRA_NETWORK:
++        *mode = IW_MODE_INFRA;
++        break;
++    case ADHOC_NETWORK:
++        *mode = IW_MODE_ADHOC;
++        break;
++    default:
++        return -EIO;
++    }
++    return 0;
++}
++
++/*
++ * SIOCSIWSENS
++ */
++int
++ar6000_ioctl_siwsens(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *sens, char *extra)
++{
++    return 0;
++}
++
++/*
++ * SIOCGIWSENS
++ */
++int
++ar6000_ioctl_giwsens(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *sens, char *extra)
++{
++    sens->value = 0;
++    sens->fixed = 1;
++
++    return 0;
++}
++
++/*
++ * SIOCGIWRANGE
++ */
++int
++ar6000_ioctl_giwrange(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_point *data, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct iw_range *range = (struct iw_range *) extra;
++    int i, ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    ar->arNumChannels = -1;
++    A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList));
++
++    if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        up(&ar->arSem);
++        return -EINTR;
++    }
++
++    data->length = sizeof(struct iw_range);
++    A_MEMZERO(range, sizeof(struct iw_range));
++
++    range->txpower_capa = IW_TXPOW_DBM;
++
++    range->min_pmp = 1 * 1024;
++    range->max_pmp = 65535 * 1024;
++    range->min_pmt = 1 * 1024;
++    range->max_pmt = 1000 * 1024;
++    range->pmp_flags = IW_POWER_PERIOD;
++    range->pmt_flags = IW_POWER_TIMEOUT;
++    range->pm_capa = 0;
++
++    range->we_version_compiled = WIRELESS_EXT;
++    range->we_version_source = 13;
++
++    range->retry_capa = IW_RETRY_LIMIT;
++    range->retry_flags = IW_RETRY_LIMIT;
++    range->min_retry = 0;
++    range->max_retry = 255;
++
++    range->num_frequency = range->num_channels = ar->arNumChannels;
++    for (i = 0; i < ar->arNumChannels; i++) {
++        range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]);
++        range->freq[i].m = ar->arChannelList[i] * 100000;
++        range->freq[i].e = 1;
++         /*
++         * Linux supports max of 32 channels, bail out once you
++         * reach the max.
++         */
++        if (i == IW_MAX_FREQUENCIES) {
++            break;
++        }
++    }
++
++    /* Max quality is max field value minus noise floor */
++    range->max_qual.qual  = 0xff - 161;
++
++    /*
++     * In order to use dBm measurements, 'level' must be lower
++     * than any possible measurement (see iw_print_stats() in
++     * wireless tools).  It's unclear how this is meant to be
++     * done, but setting zero in these values forces dBm and
++     * the actual numbers are not used.
++     */
++    range->max_qual.level = 0;
++    range->max_qual.noise = 0;
++
++    range->sensitivity = 3;
++
++    range->max_encoding_tokens = 4;
++    /* XXX query driver to find out supported key sizes */
++    range->num_encoding_sizes = 3;
++    range->encoding_size[0] = 5;        /* 40-bit */
++    range->encoding_size[1] = 13;       /* 104-bit */
++    range->encoding_size[2] = 16;       /* 128-bit */
++
++    range->num_bitrates = 0;
++
++    /* estimated maximum TCP throughput values (bps) */
++    range->throughput = 22000000;
++
++    range->min_rts = 0;
++    range->max_rts = 2347;
++    range->min_frag = 256;
++    range->max_frag = 2346;
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++
++/*
++ * SIOCSIWAP
++ * This ioctl is used to set the desired bssid for the connect command.
++ */
++int
++ar6000_ioctl_siwap(struct net_device *dev,
++              struct iw_request_info *info,
++              struct sockaddr *ap_addr, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ap_addr->sa_family != ARPHRD_ETHER) {
++        return -EIO;
++    }
++
++    if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) {
++        A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++    } else {
++        A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data,  sizeof(ar->arReqBssid));
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCGIWAP
++ */
++int
++ar6000_ioctl_giwap(struct net_device *dev,
++              struct iw_request_info *info,
++              struct sockaddr *ap_addr, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arConnected != TRUE) {
++        return -EINVAL;
++    }
++
++    A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid));
++    ap_addr->sa_family = ARPHRD_ETHER;
++
++    return 0;
++}
++
++/*
++ * SIOCGIWAPLIST
++ */
++int
++ar6000_ioctl_iwaplist(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_point *data, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++/*
++ * SIOCSIWSCAN
++ */
++int
++ar6000_ioctl_siwscan(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *extra)
++{
++#define ACT_DWELLTIME_DEFAULT   105
++#define HOME_TXDRAIN_TIME       100
++#define SCAN_INT                HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    /* We ask for everything from the target */
++    if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
++	    printk("Couldn't set filtering\n");
++	    ret = -EIO;
++    }
++
++    if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \
++                          HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) {
++        ret = -EIO;
++    }
++
++    ar->scan_complete = 0;
++    wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete,
++				     5 * HZ);
++
++    if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) {
++	    printk("Couldn't set filtering\n");
++	    ret = -EIO;
++    }
++
++    return ret;
++#undef  ACT_DWELLTIME_DEFAULT
++#undef HOME_TXDRAIN_TIME
++#undef SCAN_INT
++}
++
++
++/*
++ * Units are in db above the noise floor. That means the
++ * rssi values reported in the tx/rx descriptors in the
++ * driver are the SNR expressed in db.
++ *
++ * If you assume that the noise floor is -95, which is an
++ * excellent assumption 99.5 % of the time, then you can
++ * derive the absolute signal level (i.e. -95 + rssi).
++ * There are some other slight factors to take into account
++ * depending on whether the rssi measurement is from 11b,
++ * 11g, or 11a.   These differences are at most 2db and
++ * can be documented.
++ *
++ * NB: various calculations are based on the orinoco/wavelan
++ *     drivers for compatibility
++ */
++static void
++ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi)
++{
++    if (rssi < 0) {
++        iq->qual = 0;
++    } else {
++        iq->qual = rssi;
++    }
++
++    /* NB: max is 94 because noise is hardcoded to 161 */
++    if (iq->qual > 94)
++        iq->qual = 94;
++
++    iq->noise = 161;        /* -95dBm */
++    iq->level = iq->noise + iq->qual;
++    iq->updated = 7;
++}
++
++
++/* Structures to export the Wireless Handlers */
++static const iw_handler ath_handlers[] = {
++    (iw_handler) NULL,                          /* SIOCSIWCOMMIT */
++    (iw_handler) ar6000_ioctl_giwname,          /* SIOCGIWNAME */
++    (iw_handler) NULL,                          /* SIOCSIWNWID */
++    (iw_handler) NULL,                          /* SIOCGIWNWID */
++    (iw_handler) ar6000_ioctl_siwfreq,          /* SIOCSIWFREQ */
++    (iw_handler) ar6000_ioctl_giwfreq,          /* SIOCGIWFREQ */
++    (iw_handler) ar6000_ioctl_siwmode,          /* SIOCSIWMODE */
++    (iw_handler) ar6000_ioctl_giwmode,          /* SIOCGIWMODE */
++    (iw_handler) ar6000_ioctl_siwsens,          /* SIOCSIWSENS */
++    (iw_handler) ar6000_ioctl_giwsens,          /* SIOCGIWSENS */
++    (iw_handler) NULL /* not _used */,          /* SIOCSIWRANGE */
++    (iw_handler) ar6000_ioctl_giwrange,         /* SIOCGIWRANGE */
++    (iw_handler) NULL /* not used */,           /* SIOCSIWPRIV */
++    (iw_handler) NULL /* kernel code */,        /* SIOCGIWPRIV */
++    (iw_handler) NULL /* not used */,           /* SIOCSIWSTATS */
++    (iw_handler) NULL /* kernel code */,        /* SIOCGIWSTATS */
++    (iw_handler) NULL,                          /* SIOCSIWSPY */
++    (iw_handler) NULL,                          /* SIOCGIWSPY */
++    (iw_handler) NULL,                          /* SIOCSIWTHRSPY */
++    (iw_handler) NULL,                          /* SIOCGIWTHRSPY */
++    (iw_handler) ar6000_ioctl_siwap,            /* SIOCSIWAP */
++    (iw_handler) ar6000_ioctl_giwap,            /* SIOCGIWAP */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) ar6000_ioctl_iwaplist,         /* SIOCGIWAPLIST */
++    (iw_handler) ar6000_ioctl_siwscan,          /* SIOCSIWSCAN */
++    (iw_handler) ar6000_ioctl_giwscan,          /* SIOCGIWSCAN */
++    (iw_handler) ar6000_ioctl_siwessid,         /* SIOCSIWESSID */
++    (iw_handler) ar6000_ioctl_giwessid,         /* SIOCGIWESSID */
++    (iw_handler) NULL,                          /* SIOCSIWNICKN */
++    (iw_handler) NULL,                          /* SIOCGIWNICKN */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) ar6000_ioctl_siwrate,          /* SIOCSIWRATE */
++    (iw_handler) ar6000_ioctl_giwrate,          /* SIOCGIWRATE */
++    (iw_handler) NULL,           /* SIOCSIWRTS */
++    (iw_handler) NULL,           /* SIOCGIWRTS */
++    (iw_handler) NULL,          /* SIOCSIWFRAG */
++    (iw_handler) NULL,          /* SIOCGIWFRAG */
++    (iw_handler) ar6000_ioctl_siwtxpow,         /* SIOCSIWTXPOW */
++    (iw_handler) ar6000_ioctl_giwtxpow,         /* SIOCGIWTXPOW */
++    (iw_handler) ar6000_ioctl_siwretry,         /* SIOCSIWRETRY */
++    (iw_handler) ar6000_ioctl_giwretry,         /* SIOCGIWRETRY */
++    (iw_handler) ar6000_ioctl_siwencode,        /* SIOCSIWENCODE */
++    (iw_handler) ar6000_ioctl_giwencode,        /* SIOCGIWENCODE */
++    (iw_handler) ar6000_ioctl_siwpower,         /* SIOCSIWPOWER */
++    (iw_handler) ar6000_ioctl_giwpower,         /* SIOCGIWPOWER */
++    (iw_handler) NULL,	/* -- hole -- */
++    (iw_handler) NULL,	/* -- hole -- */
++    (iw_handler) ar6000_ioctl_siwgenie,	/* SIOCSIWGENIE */
++    (iw_handler) ar6000_ioctl_giwgenie,	/* SIOCGIWGENIE */
++    (iw_handler) ar6000_ioctl_siwauth,	/* SIOCSIWAUTH */
++    (iw_handler) ar6000_ioctl_giwauth,	/* SIOCGIWAUTH */
++    (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */
++    (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */
++    (iw_handler) NULL,		/* SIOCSIWPMKSA */
++};
++
++static const iw_handler ath_priv_handlers[] = {
++    (iw_handler) ar6000_ioctl_setparam,         /* SIOCWFIRSTPRIV+0 */
++    (iw_handler) ar6000_ioctl_getparam,         /* SIOCWFIRSTPRIV+1 */
++    (iw_handler) ar6000_ioctl_setkey,           /* SIOCWFIRSTPRIV+2 */
++    (iw_handler) ar6000_ioctl_setwmmparams,     /* SIOCWFIRSTPRIV+3 */
++    (iw_handler) ar6000_ioctl_delkey,           /* SIOCWFIRSTPRIV+4 */
++    (iw_handler) ar6000_ioctl_getwmmparams,     /* SIOCWFIRSTPRIV+5 */
++    (iw_handler) ar6000_ioctl_setoptie,         /* SIOCWFIRSTPRIV+6 */
++    (iw_handler) ar6000_ioctl_setmlme,          /* SIOCWFIRSTPRIV+7 */
++    (iw_handler) ar6000_ioctl_addpmkid,         /* SIOCWFIRSTPRIV+8 */
++};
++
++#define IW_PRIV_TYPE_KEY \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key))
++#define IW_PRIV_TYPE_DELKEY \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key))
++#define IW_PRIV_TYPE_MLME \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme))
++#define IW_PRIV_TYPE_ADDPMKID \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid))
++
++static const struct iw_priv_args ar6000_priv_args[] = {
++    { IEEE80211_IOCTL_SETKEY,
++      IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0,       "setkey"},
++    { IEEE80211_IOCTL_DELKEY,
++      IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0,    "delkey"},
++    { IEEE80211_IOCTL_SETPARAM,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0,   "setparam"},
++    { IEEE80211_IOCTL_GETPARAM,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getparam"},
++    { IEEE80211_IOCTL_SETWMMPARAMS,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0,   "setwmmparams"},
++    { IEEE80211_IOCTL_GETWMMPARAMS,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getwmmparams"},
++    { IEEE80211_IOCTL_SETOPTIE,
++      IW_PRIV_TYPE_BYTE, 0,       "setie"},
++    { IEEE80211_IOCTL_SETMLME,
++      IW_PRIV_TYPE_MLME, 0,       "setmlme"},
++    { IEEE80211_IOCTL_ADDPMKID,
++      IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0,  "addpmkid"},
++};
++
++void ar6000_ioctl_iwsetup(struct iw_handler_def *def)
++{
++    def->private_args = (struct iw_priv_args *)ar6000_priv_args;
++    def->num_private_args = ARRAY_SIZE(ar6000_priv_args);
++}
++
++struct iw_handler_def ath_iw_handler_def = {
++    .standard         = (iw_handler *)ath_handlers,
++    .num_standard     = ARRAY_SIZE(ath_handlers),
++    .private          = (iw_handler *)ath_priv_handlers,
++    .num_private      = ARRAY_SIZE(ath_priv_handlers),
++};
++
++
+diff --git a/drivers/ar6000/bmi/bmi.c b/drivers/ar6000/bmi/bmi.c
+new file mode 100644
+index 0000000..d7b610c
+--- /dev/null
++++ b/drivers/ar6000/bmi/bmi.c
+@@ -0,0 +1,657 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "hif.h"
++#include "bmi.h"
++#include "htc_api.h"
++#include "bmi_internal.h"
++
++/*
++Although we had envisioned BMI to run on top of HTC, this is not what the
++final implementation boiled down to on dragon. Its a part of BSP and does
++not use the HTC protocol either. On the host side, however, we were still
++living with the original idea. I think the time has come to accept the truth
++and separate it from HTC which has been carrying BMI's burden all this while.
++It shall make HTC state machine relatively simpler
++*/
++
++/* APIs visible to the driver */
++void
++BMIInit(void)
++{
++    bmiDone = FALSE;
++}
++
++A_STATUS
++BMIDone(HIF_DEVICE *device)
++{
++    A_STATUS status;
++    A_UINT32 cid;
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
++        return A_OK;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device));
++    bmiDone = TRUE;
++    cid = BMI_DONE;
++
++    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
++{
++    A_STATUS status;
++    A_UINT32 cid;
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
++    cid = BMI_GET_TARGET_INFO;
++
++    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
++                                                sizeof(targ_info->target_ver));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
++        return A_ERROR;
++    }
++
++    if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
++        /* Determine how many bytes are in the Target's targ_info */
++        status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
++                                            sizeof(targ_info->target_info_byte_count));
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
++            return A_ERROR;
++        }
++
++        /*
++         * The Target's targ_info doesn't match the Host's targ_info.
++         * We need to do some backwards compatibility work to make this OK.
++         */
++        A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
++
++        /* Read the remainder of the targ_info */
++        status = bmiBufferReceive(device,
++                        ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
++                        sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count));
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
++                        					targ_info->target_info_byte_count));
++            return A_ERROR;
++        }
++    } else {
++        /*
++         * Target must be an AR6001 whose firmware does not
++         * support BMI_GET_TARGET_INFO.  Construct the data
++         * that it would have sent.
++         */
++        targ_info->target_info_byte_count = sizeof(targ_info);
++        targ_info->target_type = TARGET_TYPE_AR6001;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
++        							targ_info->target_ver, targ_info->target_type));
++    printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
++	   targ_info->target_ver, targ_info->target_type);
++
++    return A_OK;
++}
++
++A_STATUS
++BMIReadMemory(HIF_DEVICE *device,
++              A_UINT32 address,
++              A_UCHAR *buffer,
++              A_UINT32 length)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    A_UINT32 remaining, rxlen;
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
++    memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       			("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
++        			device, address, length));
++
++    cid = BMI_READ_MEMORY;
++
++    remaining = length;
++
++    while (remaining)
++    {
++        rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX;
++        offset = 0;
++        A_MEMCPY(&data[offset], &cid, sizeof(cid));
++        offset += sizeof(cid);
++        A_MEMCPY(&data[offset], &address, sizeof(address));
++        offset += sizeof(address);
++        A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen));
++        offset += sizeof(length);
++
++        status = bmiBufferSend(device, data, offset);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++            return A_ERROR;
++        }
++        status = bmiBufferReceive(device, data, rxlen);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++            return A_ERROR;
++        }
++        A_MEMCPY(&buffer[length - remaining], data, rxlen);
++        remaining -= rxlen; address += rxlen;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIWriteMemory(HIF_DEVICE *device,
++               A_UINT32 address,
++               A_UCHAR *buffer,
++               A_UINT32 length)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    A_UINT32 remaining, txlen;
++    const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length);
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
++	memset (&data, 0, header);
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
++         device, address, length));
++
++    cid = BMI_WRITE_MEMORY;
++
++    remaining = length;
++    while (remaining)
++    {
++        txlen = (remaining < (BMI_DATASZ_MAX - header)) ?
++                                       remaining : (BMI_DATASZ_MAX - header);
++        offset = 0;
++        A_MEMCPY(&data[offset], &cid, sizeof(cid));
++        offset += sizeof(cid);
++        A_MEMCPY(&data[offset], &address, sizeof(address));
++        offset += sizeof(address);
++        A_MEMCPY(&data[offset], &txlen, sizeof(txlen));
++        offset += sizeof(txlen);
++        A_MEMCPY(&data[offset], &buffer[length - remaining], txlen);
++        offset += txlen;
++        status = bmiBufferSend(device, data, offset);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++            return A_ERROR;
++        }
++        remaining -= txlen; address += txlen;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIExecute(HIF_DEVICE *device,
++           A_UINT32 address,
++           A_UINT32 *param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)];
++    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
++        device, address, *param));
++
++    cid = BMI_EXECUTE;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    A_MEMCPY(&data[offset], param, sizeof(*param));
++    offset += sizeof(*param);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, data, sizeof(*param));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++
++    A_MEMCPY(param, data, sizeof(*param));
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param));
++    return A_OK;
++}
++
++A_STATUS
++BMISetAppStart(HIF_DEVICE *device,
++               A_UINT32 address)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address)];
++    memset (&data, 0, sizeof(cid) + sizeof(address));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n",
++        device, address));
++
++    cid = BMI_SET_APP_START;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIReadSOCRegister(HIF_DEVICE *device,
++                   A_UINT32 address,
++                   A_UINT32 *param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address)];
++    memset (&data, 0, sizeof(cid) + sizeof(address));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n",
++       device, address));
++
++    cid = BMI_READ_SOC_REGISTER;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, data, sizeof(*param));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++    A_MEMCPY(param, data, sizeof(*param));
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param));
++    return A_OK;
++}
++
++A_STATUS
++BMIWriteSOCRegister(HIF_DEVICE *device,
++                    A_UINT32 address,
++                    A_UINT32 param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)];
++
++    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++     ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
++     device, address, param));
++
++    cid = BMI_WRITE_SOC_REGISTER;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    A_MEMCPY(&data[offset], &param, sizeof(param));
++    offset += sizeof(param);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchInstall(HIF_DEVICE *device,
++                   A_UINT32 ROM_addr,
++                   A_UINT32 RAM_addr,
++                   A_UINT32 nbytes,
++                   A_UINT32 do_activate,
++                   A_UINT32 *rompatch_id)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
++                                sizeof(nbytes) + sizeof(do_activate)];
++
++	memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
++                      sizeof(nbytes) + sizeof(do_activate));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n",
++         device, ROM_addr, RAM_addr, nbytes, do_activate));
++
++    cid = BMI_ROMPATCH_INSTALL;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr));
++    offset += sizeof(ROM_addr);
++    A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr));
++    offset += sizeof(RAM_addr);
++    A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes));
++    offset += sizeof(nbytes);
++    A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate));
++    offset += sizeof(do_activate);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id));
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchUninstall(HIF_DEVICE *device,
++                     A_UINT32 rompatch_id)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)];
++    memset (&data, 0, sizeof(cid) + sizeof(rompatch_id));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n",
++         								 device, rompatch_id));
++
++    cid = BMI_ROMPATCH_UNINSTALL;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id));
++    offset += sizeof(rompatch_id);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id));
++    return A_OK;
++}
++
++static A_STATUS
++_BMIrompatchChangeActivation(HIF_DEVICE *device,
++                             A_UINT32 rompatch_count,
++                             A_UINT32 *rompatch_list,
++                             A_UINT32 do_activate)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)];
++    A_UINT32 length;
++
++	memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n",
++           device, rompatch_count));
++
++    cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count));
++    offset += sizeof(rompatch_count);
++    length = rompatch_count * sizeof(*rompatch_list);
++    A_MEMCPY(&data[offset], rompatch_list, length);
++    offset += length;
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchActivate(HIF_DEVICE *device,
++                    A_UINT32 rompatch_count,
++                    A_UINT32 *rompatch_list)
++{
++    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1);
++}
++
++A_STATUS
++BMIrompatchDeactivate(HIF_DEVICE *device,
++                      A_UINT32 rompatch_count,
++                      A_UINT32 *rompatch_list)
++{
++    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0);
++}
++
++/* BMI Access routines */
++A_STATUS
++bmiBufferSend(HIF_DEVICE *device,
++              A_UCHAR *buffer,
++              A_UINT32 length)
++{
++    A_STATUS status;
++    A_UINT32 timeout;
++    A_UINT32 address;
++    static A_UINT32 cmdCredits;
++    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
++
++    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
++                       &mboxAddress, sizeof(mboxAddress));
++
++    cmdCredits = 0;
++    timeout = BMI_COMMUNICATION_TIMEOUT;
++
++    while(timeout-- && !cmdCredits) {
++        /* Read the counter register to get the command credits */
++        address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
++        /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause
++         * a decrement, while the remaining 3 bytes has no effect.  The rationale behind this is to
++         * make all HIF accesses 4-byte aligned */
++        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4,
++            HIF_RD_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
++            return A_ERROR;
++        }
++        /* the counter is only 8=bits, ignore anything in the upper 3 bytes */
++        cmdCredits &= 0xFF;
++    }
++
++    if (cmdCredits) {
++        address = mboxAddress[ENDPOINT1];
++        status = HIFReadWrite(device, address, buffer, length,
++            HIF_WR_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
++            return A_ERROR;
++        }
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n"));
++        return A_ERROR;
++    }
++
++    return status;
++}
++
++A_STATUS
++bmiBufferReceive(HIF_DEVICE *device,
++                 A_UCHAR *buffer,
++                 A_UINT32 length)
++{
++    A_STATUS status;
++    A_UINT32 address;
++    A_UINT32 timeout;
++    static A_UINT32 cmdCredits;
++    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
++
++    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
++                       &mboxAddress, sizeof(mboxAddress));
++
++    cmdCredits = 0;
++    timeout = BMI_COMMUNICATION_TIMEOUT;
++    while(timeout-- && !cmdCredits) {
++        /* Read the counter register to get the command credits */
++        address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1;
++        /* read the counter using a 4-byte read.  Since the counter is NOT auto-decrementing,
++         * we can read this counter multiple times using a non-incrementing address mode.
++         * The rationale here is to make all HIF accesses a multiple of 4 bytes */
++        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits),
++            HIF_RD_SYNC_BYTE_FIX, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
++            return A_ERROR;
++        }
++            /* we did a 4-byte read to the same count register so mask off upper bytes */
++        cmdCredits &= 0xFF;
++        status = A_ERROR;
++    }
++
++    if (cmdCredits) {
++        address = mboxAddress[ENDPOINT1];
++        status = HIFReadWrite(device, address, buffer, length,
++            HIF_RD_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
++            return A_ERROR;
++        }
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n"));
++        return A_ERROR;
++    }
++
++    return status;
++}
+diff --git a/drivers/ar6000/bmi/bmi_internal.h b/drivers/ar6000/bmi/bmi_internal.h
+new file mode 100644
+index 0000000..1e21354
+--- /dev/null
++++ b/drivers/ar6000/bmi/bmi_internal.h
+@@ -0,0 +1,45 @@
++#ifndef BMI_INTERNAL_H
++#define BMI_INTERNAL_H
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "AR6Khwreg.h"
++#include "bmi_msg.h"
++
++#define BMI_COMMUNICATION_TIMEOUT       100000
++
++/* ------ Global Variable Declarations ------- */
++A_BOOL bmiDone;
++
++A_STATUS
++bmiBufferSend(HIF_DEVICE *device,
++              A_UCHAR *buffer,
++              A_UINT32 length);
++
++A_STATUS
++bmiBufferReceive(HIF_DEVICE *device,
++                 A_UCHAR *buffer,
++                 A_UINT32 length);
++
++#endif
+diff --git a/drivers/ar6000/hif/hif.c b/drivers/ar6000/hif/hif.c
+new file mode 100644
+index 0000000..d04486c
+--- /dev/null
++++ b/drivers/ar6000/hif/hif.c
+@@ -0,0 +1,824 @@
++/*
++ * @file: hif.c
++ *
++ * @abstract: HIF layer reference implementation for Atheros SDIO stack
++ *
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "hif_internal.h"
++
++/* ------ Static Variables ------ */
++
++/* ------ Global Variable Declarations ------- */
++SD_PNP_INFO Ids[] = {
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++    }                      //list is null termintaed
++};
++
++TARGET_FUNCTION_CONTEXT FunctionContext = {
++    .function.Version    = CT_SDIO_STACK_VERSION_CODE,
++    .function.pName      = "sdio_wlan",
++    .function.MaxDevices = 1,
++    .function.NumDevices = 0,
++    .function.pIds       = Ids,
++    .function.pProbe     = hifDeviceInserted,
++    .function.pRemove    = hifDeviceRemoved,
++    .function.pSuspend   = NULL,
++    .function.pResume    = NULL,
++    .function.pWake      = NULL,
++    .function.pContext   = &FunctionContext,
++};
++
++HIF_DEVICE hifDevice[HIF_MAX_DEVICES];
++HTC_CALLBACKS htcCallbacks;
++BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM];
++static BUS_REQUEST *s_busRequestFreeQueue = NULL;
++OS_CRITICALSECTION lock;
++extern A_UINT32 onebitmode;
++extern A_UINT32 busspeedlow;
++
++#ifdef DEBUG
++extern A_UINT32 debughif;
++#define ATH_DEBUG_ERROR 1
++#define ATH_DEBUG_WARN  2
++#define ATH_DEBUG_TRACE 3
++#define _AR_DEBUG_PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(lvl, args)\
++    {if (lvl <= debughif)\
++        A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\
++    }
++#else
++#define AR_DEBUG_PRINTF(lvl, args)
++#endif
++
++static BUS_REQUEST *hifAllocateBusRequest(void);
++static void hifFreeBusRequest(BUS_REQUEST *busrequest);
++static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper);
++static void ResetAllCards(void);
++
++/* ------ Functions ------ */
++int HIFInit(HTC_CALLBACKS *callbacks)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(callbacks != NULL);
++
++    /* Store the callback and event handlers */
++    htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
++    htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler;
++    htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler;
++    htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler;
++    htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler;
++    htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler;
++    htcCallbacks.dsrHandler = callbacks->dsrHandler;
++
++    CriticalSectionInit(&lock);
++
++    /* Register with bus driver core */
++    status = SDIO_RegisterFunction(&FunctionContext.function);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++
++    return(0);
++}
++
++A_STATUS
++HIFReadWrite(HIF_DEVICE *device,
++             A_UINT32 address,
++             A_UCHAR *buffer,
++             A_UINT32 length,
++             A_UINT32 request,
++             void *context)
++{
++    A_UINT8 rw;
++    A_UINT8 mode;
++    A_UINT8 funcNo;
++    A_UINT8 opcode;
++    A_UINT16 count;
++    SDREQUEST *sdrequest;
++    SDIO_STATUS sdiostatus;
++    BUS_REQUEST *busrequest;
++    A_STATUS    status = A_OK;
++
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++
++    do {
++        busrequest = hifAllocateBusRequest();
++        if (busrequest == NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n"));
++            status = A_NO_RESOURCE;
++            break;
++        }
++
++        sdrequest = busrequest->request;
++        busrequest->context = context;
++
++        sdrequest->pDataBuffer = buffer;
++        if (request & HIF_SYNCHRONOUS) {
++            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS;
++            sdrequest->pCompleteContext = NULL;
++            sdrequest->pCompletion = NULL;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n"));
++        } else if (request & HIF_ASYNCHRONOUS) {
++            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS |
++                               SDREQ_FLAGS_TRANS_ASYNC;
++            sdrequest->pCompleteContext = busrequest;
++            sdrequest->pCompletion = hifRWCompletionHandler;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid execution mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_EXTENDED_IO) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n"));
++            sdrequest->Command = CMD53;
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid command type: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_BLOCK_BASIS) {
++            mode = CMD53_BLOCK_BASIS;
++            sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE;
++            sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE;
++            count = sdrequest->BlockCount;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Block mode (BlockLen: %d, BlockCount: %d)\n",
++                            sdrequest->BlockLen, sdrequest->BlockCount));
++        } else if (request & HIF_BYTE_BASIS) {
++            mode = CMD53_BYTE_BASIS;
++            sdrequest->BlockLen = length;
++            sdrequest->BlockCount = 1;
++            count = sdrequest->BlockLen;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Byte mode (BlockLen: %d, BlockCount: %d)\n",
++                            sdrequest->BlockLen, sdrequest->BlockCount));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid data mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++#if 0
++        /* useful for checking register accesses */
++        if (length & 0x3) {
++            A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n",
++                                request & HIF_WRITE ? "write":"read", address, length);
++        }
++#endif
++
++        if ((address >= HIF_MBOX_START_ADDR(0)) &&
++            (address <= HIF_MBOX_END_ADDR(3)))
++        {
++
++            DBG_ASSERT(length <= HIF_MBOX_WIDTH);
++
++            /*
++             * Mailbox write. Adjust the address so that the last byte
++             * falls on the EOM address.
++             */
++            address += (HIF_MBOX_WIDTH - length);
++        }
++
++
++
++        if (request & HIF_WRITE) {
++            rw = CMD53_WRITE;
++            sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n"));
++        } else if (request & HIF_READ) {
++            rw = CMD53_READ;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid direction: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_FIXED_ADDRESS) {
++            opcode = CMD53_FIXED_ADDRESS;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n"));
++        } else if (request & HIF_INCREMENTAL_ADDRESS) {
++            opcode = CMD53_INCR_ADDRESS;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid address mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle);
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo));
++        SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo,
++                           mode, opcode, address, count);
++
++        /* Send the command out */
++        sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest);
++
++        if (!SDIO_SUCCESS(sdiostatus)) {
++            status = A_ERROR;
++        }
++
++    } while (FALSE);
++
++    if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) {
++        if (busrequest != NULL) {
++            hifFreeBusRequest(busrequest);
++        }
++    }
++
++    if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) {
++            /* call back async handler on failure */
++        htcCallbacks.rwCompletionHandler(context, status);
++    }
++
++    return status;
++}
++
++A_STATUS
++HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
++                   void *config, A_UINT32 configLen)
++{
++    A_UINT32 count;
++
++    switch(opcode) {
++        case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
++            ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE;
++            ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE;
++            ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE;
++            ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE;
++            break;
++
++        case HIF_DEVICE_GET_MBOX_ADDR:
++            for (count = 0; count < 4; count ++) {
++                ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count);
++            }
++            break;
++        case HIF_DEVICE_GET_IRQ_PROC_MODE:
++                /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */
++            *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC;
++            break;
++        default:
++            AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
++                            ("Unsupported configuration opcode: %d\n", opcode));
++            return A_ERROR;
++    }
++
++    return A_OK;
++}
++
++void
++HIFShutDownDevice(HIF_DEVICE *device)
++{
++    A_UINT8 data;
++    A_UINT32 count;
++    SDIO_STATUS status;
++    SDCONFIG_BUS_MODE_DATA busSettings;
++    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
++
++    if (device != NULL) {
++        DBG_ASSERT(device->handle != NULL);
++
++        /* Remove the allocated current if any */
++        status = SDLIB_IssueConfig(device->handle,
++                                   SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /* Disable the card */
++        fData.EnableFlags = SDCONFIG_DISABLE_FUNC;
++        fData.TimeOut = 1;
++        status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE,
++                                   &fData, sizeof(fData));
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /* Perform a soft I/O reset */
++        data = SDIO_IO_RESET;
++        status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG,
++                                  &data, 1, 1);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /*
++         * WAR - Codetelligence driver does not seem to shutdown correctly in 1
++         * bit mode. By default it configures the HC in the 4 bit. Its later in
++         * our driver that we switch to 1 bit mode. If we try to shutdown, the
++         * driver hangs so we revert to 4 bit mode, to be transparent to the
++         * underlying bus driver.
++         */
++        if (onebitmode) {
++            ZERO_OBJECT(busSettings);
++            busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle);
++            SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
++                                   SDCONFIG_BUS_WIDTH_4_BIT);
++
++            /* Issue config request to change the bus width to 4 bit */
++            status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
++                                       &busSettings,
++                                       sizeof(SDCONFIG_BUS_MODE_DATA));
++            DBG_ASSERT(SDIO_SUCCESS(status));
++        }
++
++        /* Free the bus requests */
++        for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
++            SDDeviceFreeRequest(device->handle, busRequest[count].request);
++        }
++        /* Clean up the queue */
++        s_busRequestFreeQueue = NULL;
++    } else {
++            /* since we are unloading the driver anyways, reset all cards in case the SDIO card
++             * is externally powered and we are unloading the SDIO stack.  This avoids the problem when
++             * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already
++             * enumerated */
++        ResetAllCards();
++        /* Unregister with bus driver core */
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Unregistering with the bus driver\n"));
++        status = SDIO_UnregisterFunction(&FunctionContext.function);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++    }
++}
++
++void
++hifRWCompletionHandler(SDREQUEST *request)
++{
++    A_STATUS status;
++    void *context;
++    BUS_REQUEST *busrequest;
++
++    if (SDIO_SUCCESS(request->Status)) {
++        status = A_OK;
++    } else {
++        status = A_ERROR;
++    }
++
++    DBG_ASSERT(status == A_OK);
++    busrequest = (BUS_REQUEST *) request->pCompleteContext;
++    context = (void *) busrequest->context;
++        /* free the request before calling the callback, in case the
++         * callback submits another request, this guarantees that
++         * there is at least 1 free request available everytime the callback
++         * is invoked */
++    hifFreeBusRequest(busrequest);
++    htcCallbacks.rwCompletionHandler(context, status);
++}
++
++void
++hifIRQHandler(void *context)
++{
++    A_STATUS status;
++    HIF_DEVICE *device;
++
++    device = (HIF_DEVICE *)context;
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++    status = htcCallbacks.dsrHandler(device->htc_handle);
++    DBG_ASSERT(status == A_OK);
++}
++
++BOOL
++hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle)
++{
++    BOOL enabled;
++    A_UINT8 data;
++    A_UINT32 count;
++    HIF_DEVICE *device;
++    SDIO_STATUS status;
++    A_UINT16 maxBlocks;
++    A_UINT16 maxBlockSize;
++    SDCONFIG_BUS_MODE_DATA busSettings;
++    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
++    TARGET_FUNCTION_CONTEXT *functionContext;
++    SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent;
++    SD_BUSCLOCK_RATE                currentBusClock;
++
++    DBG_ASSERT(function != NULL);
++    DBG_ASSERT(handle != NULL);
++
++    device = addHifDevice(handle);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++    functionContext =  (TARGET_FUNCTION_CONTEXT *)function->pContext;
++
++    /*
++     * Issue commands to get the manufacturer ID and stuff and compare it
++     * against the rev Id derived from the ID registered during the
++     * initialization process. Report the device only in the case there
++     * is a match. In the case od SDIO, the bus driver has already queried
++     * these details so we just need to use their data structures to get the
++     * relevant values. Infact, the driver has already matched it against
++     * the Ids that we registered with it so we dont need to the step here.
++     */
++
++    /* Configure the SDIO Bus Width */
++    if (onebitmode) {
++        data = SDIO_BUS_WIDTH_1_BIT;
++        status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1);
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Unable to set the bus width to 1 bit\n"));
++            return FALSE;
++        }
++    }
++
++    /* Get current bus flags */
++    ZERO_OBJECT(busSettings);
++
++    busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle);
++    if (onebitmode) {
++        SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
++                               SDCONFIG_BUS_WIDTH_1_BIT);
++    }
++
++        /* get the current operating clock, the bus driver sets us up based
++         * on what our CIS reports and what the host controller can handle
++         * we can use this to determine whether we want to drop our clock rate
++         * down */
++    currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle);
++    busSettings.ClockRate = currentBusClock;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("HIF currently running at: %d \n",currentBusClock));
++
++        /* see if HIF wants to run at a lower clock speed, we may already be
++         * at that lower clock speed */
++    if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) {
++        busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow;
++        AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
++                        ("HIF overriding clock to %d \n",busSettings.ClockRate));
++    }
++
++    /* Issue config request to override clock rate */
++    status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings,
++                               sizeof(SDCONFIG_BUS_MODE_DATA));
++    if (!SDIO_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Unable to configure the host clock\n"));
++        return FALSE;
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Configured clock: %d, Maximum clock: %d\n",
++                        busSettings.ActualClockRate,
++                        SDDEVICE_GET_MAX_CLOCK(handle)));
++    }
++
++    /*
++     * Check if the target supports block mode. This result of this check
++     * can be used to implement the HIFReadWrite API.
++     */
++    if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) {
++        /* Limit block size to operational block limit or card function
++           capability */
++        maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle),
++                           SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle));
++
++        /* check if the card support multi-block transfers */
++        if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n"));
++
++            /* Limit block size to max byte basis */
++            maxBlockSize =  min(maxBlockSize,
++                                (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS);
++            maxBlocks = 1;
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n"));
++            maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle);
++            status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE);
++            if (!SDIO_SUCCESS(status)) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                                ("Failed to set block size. Err:%d\n", status));
++                return FALSE;
++            }
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Bytes Per Block: %d bytes, Block Count:%d \n",
++                        maxBlockSize, maxBlocks));
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Function does not support Block Mode!\n"));
++        return FALSE;
++    }
++
++    /* Allocate the slot current */
++    status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent);
++    if (SDIO_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n",
++                                slotCurrent.SlotCurrent));
++        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT,
++                                   &slotCurrent, sizeof(slotCurrent));
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Failed to allocate slot current %d\n", status));
++            return FALSE;
++        }
++    }
++
++    /* Enable the dragon function */
++    count = 0;
++    enabled = FALSE;
++    fData.TimeOut = 1;
++    fData.EnableFlags = SDCONFIG_ENABLE_FUNC;
++    while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled)
++    {
++        /* Enable dragon */
++        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE,
++                                   &fData, sizeof(fData));
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Attempting to enable the card again\n"));
++            continue;
++        }
++
++        /* Mark the status as enabled */
++        enabled = TRUE;
++    }
++
++    /* Check if we were succesful in enabling the target */
++    if (!enabled) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Failed to communicate with the target\n"));
++        return FALSE;
++    }
++
++    /* Allocate the bus requests to be used later */
++    A_MEMZERO(busRequest, sizeof(busRequest));
++    for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
++        if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n"));
++            /* TODO: Free the memory that has already been allocated */
++            return FALSE;
++        }
++        hifFreeBusRequest(&busRequest[count]);
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                ("0x%08x = busRequest[%d].request = 0x%08x\n",
++				(unsigned int) &busRequest[count], count,
++				(unsigned int) busRequest[count].request));
++    }
++
++        /* Schedule a worker to handle device inserted, this is a temporary workaround
++         * to fix a deadlock if the device fails to intialize in the insertion handler
++         * The failure causes the instance to shutdown the HIF layer and unregister the
++         * function driver within the busdriver probe context which can deadlock
++         *
++         * NOTE: we cannot use the default work queue because that would block
++         * SD bus request processing for all synchronous I/O. We must use a kernel
++         * thread that is creating using the helper library.
++         * */
++
++    if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper,
++                         insert_helper_func,
++                         device))) {
++        device->helper_started = TRUE;
++    }
++
++    return TRUE;
++}
++
++static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper)
++{
++
++    /*
++     * Adding a wait of around a second before we issue the very first
++     * command to dragon. During the process of loading/unloading the
++     * driver repeatedly it was observed that we get a data timeout
++     * while accessing function 1 registers in the chip. The theory at
++     * this point is that some initialization delay in dragon is
++     * causing the SDIO state in dragon core to be not ready even after
++     * the ready bit indicates that function 1 is ready. Accomodating
++     * for this behavior by adding some delay in the driver before it
++     * issues the first command after switching on dragon. Need to
++     * investigate this a bit more - TODO
++     */
++
++    A_MDELAY(1000);
++        /* Inform HTC */
++    if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n"));
++    }
++
++    return 0;
++}
++
++void
++HIFAckInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Acknowledge our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++}
++
++void
++HIFUnMaskInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Register the IRQ Handler */
++    SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device);
++
++    /* Unmask our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++}
++
++void HIFMaskInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Mask our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++
++    /* Unregister the IRQ Handler */
++    SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL);
++}
++
++static BUS_REQUEST *hifAllocateBusRequest(void)
++{
++    BUS_REQUEST *busrequest;
++
++    /* Acquire lock */
++    CriticalSectionAcquire(&lock);
++
++    /* Remove first in list */
++    if((busrequest = s_busRequestFreeQueue) != NULL)
++    {
++        s_busRequestFreeQueue = busrequest->next;
++    }
++
++    /* Release lock */
++    CriticalSectionRelease(&lock);
++
++    return busrequest;
++}
++
++static void
++hifFreeBusRequest(BUS_REQUEST *busrequest)
++{
++    DBG_ASSERT(busrequest != NULL);
++
++    /* Acquire lock */
++    CriticalSectionAcquire(&lock);
++
++    /* Insert first in list */
++    busrequest->next = s_busRequestFreeQueue;
++    s_busRequestFreeQueue = busrequest;
++
++    /* Release lock */
++    CriticalSectionRelease(&lock);
++}
++
++void
++hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle)
++{
++    A_STATUS status;
++    HIF_DEVICE *device;
++    DBG_ASSERT(function != NULL);
++    DBG_ASSERT(handle != NULL);
++
++    device = getHifDevice(handle);
++    status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK);
++
++        /* cleanup the helper thread */
++    if (device->helper_started) {
++        SDLIB_OSDeleteHelper(&device->insert_helper);
++        device->helper_started = FALSE;
++    }
++
++    delHifDevice(handle);
++    DBG_ASSERT(status == A_OK);
++}
++
++HIF_DEVICE *
++addHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    hifDevice[0].handle = handle;
++    return &hifDevice[0];
++}
++
++HIF_DEVICE *
++getHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    return &hifDevice[0];
++}
++
++void
++delHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    hifDevice[0].handle = NULL;
++}
++
++struct device*
++HIFGetOSDevice(HIF_DEVICE *device)
++{
++    return &device->handle->Device->dev;
++}
++
++static void ResetAllCards(void)
++{
++    UINT8       data;
++    SDIO_STATUS status;
++    int         i;
++
++    data = SDIO_IO_RESET;
++
++    /* set the I/O CARD reset bit:
++     * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you
++     * set the RES bit in the SDIO_IO_ABORT register.  This bit however "normally" resets the
++     * I/O functions leaving the SDIO core in the same state (as per SDIO spec).
++     * In this design, this reset can be used to reset the SDIO core itself */
++    for (i = 0; i < HIF_MAX_DEVICES; i++) {
++        if (hifDevice[i].handle != NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Issuing I/O Card reset for instance: %d \n",i));
++                /* set the I/O Card reset bit */
++            status = SDLIB_IssueCMD52(hifDevice[i].handle,
++                                      0,                    /* function 0 space */
++                                      SDIO_IO_ABORT_REG,
++                                      &data,
++                                      1,                    /* 1 byte */
++                                      TRUE);                /* write */
++        }
++    }
++
++}
++
++void HIFSetHandle(void *hif_handle, void *handle)
++{
++    HIF_DEVICE *device = (HIF_DEVICE *) hif_handle;
++
++    device->htc_handle = handle;
++
++    return;
++}
+diff --git a/drivers/ar6000/hif/hif2.c b/drivers/ar6000/hif/hif2.c
+new file mode 100644
+index 0000000..386d96e
+--- /dev/null
++++ b/drivers/ar6000/hif/hif2.c
+@@ -0,0 +1,768 @@
++/*
++ * hif2.c - HIF layer re-implementation for the Linux SDIO stack
++ *
++ * Copyright (C) 2008, 2009 by OpenMoko, Inc.
++ * Written by Werner Almesberger <werner@openmoko.org>
++ * All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * Based on:
++ *
++ * @abstract: HIF layer reference implementation for Atheros SDIO stack
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/kthread.h>
++#include <linux/list.h>
++#include <linux/wait.h>
++#include <linux/spinlock.h>
++#include <linux/mutex.h>
++#include <linux/sched.h>
++#include <linux/mmc/sdio_func.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_ids.h>
++
++#include "athdefs.h"
++#include "a_types.h"
++#include "hif.h"
++
++
++/* @@@ Hack - this wants cleaning up */
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++
++#include <mach/gta02-pm-wlan.h>
++
++#else /* CONFIG_MACH_NEO1973_GTA02 */
++
++#define	gta02_wlan_query_rfkill_lock()  1
++#define	gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb)
++#define	gta02_wlan_query_rfkill_unlock()
++#define	gta02_wlan_clear_rfkill_cb()
++
++#endif /* !CONFIG_MACH_NEO1973_GTA02 */
++
++
++/*
++ * KNOWN BUGS:
++ *
++ * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors)
++ * - latency can reach hundreds of ms, probably because of scheduling delays
++ * - packets go through about three queues before finally hitting the network
++ */
++
++/*
++ * Differences from Atheros' HIFs:
++ *
++ * - synchronous and asynchronous requests may get reordered with respect to
++ *   each other, e.g., if HIFReadWrite returns for an asynchronous request and
++ *   then HIFReadWrite is called for a synchronous request, the synchronous
++ *   request may be executed before the asynchronous request.
++ *
++ * - request queue locking seems unnecessarily complex in the Atheros HIFs.
++ *
++ * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which
++ *   can cause quite a bit of overhead. This HIF has its own light-weight
++ *   interrupt masking.
++ *
++ * - Atheros call deviceInsertedHandler from a thread spawned off the probe or
++ *   device insertion function. The original explanation for the Atheros SDIO
++ *   stack said that this is done because a delay is needed to let the chip
++ *   complete initialization. There is indeed a one second delay in the thread.
++ *
++ *   The Atheros Linux SDIO HIF removes the delay and only retains the thread.
++ *   Experimentally removing the thread didn't show any conflicts, so let's get
++ *   rid of it for good.
++ *
++ * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in
++ *   SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't
++ *   either, and this seems to work fine.
++ *   @@@ Need to check this with Atheros.
++ */
++
++
++#define MBOXES			4
++
++#define HIF_MBOX_BLOCK_SIZE	128
++#define	HIF_MBOX_BASE_ADDR	0x800
++#define	HIF_MBOX_WIDTH		0x800
++#define	HIF_MBOX_START_ADDR(mbox) \
++    (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH)
++
++
++struct hif_device {
++	void *htc_handle;
++	struct sdio_func *func;
++
++	/*
++	 * @@@ our sweet little bit of bogosity - the mechanism that lets us
++	 * use the SDIO stack from softirqs. This really wants to use skbs.
++	 */
++	struct list_head queue;
++	spinlock_t queue_lock;
++	struct task_struct *io_task;
++	wait_queue_head_t wait;
++
++	/*
++	 * activate_lock protects "active" and the activation/deactivation
++	 * process itself.
++	 *
++	 * Relation to other locks: The SDIO function can be claimed while
++	 * activate_lock is being held, but trying to acquire activate_lock
++	 * while having ownership of the SDIO function could cause a deadlock.
++	 */
++	int active;
++	struct mutex activate_lock;
++};
++
++struct hif_request {
++	struct list_head list;
++	struct sdio_func *func;
++	int (*read)(struct sdio_func *func,
++	    void *dst, unsigned int addr, int count);
++	int (*write)(struct sdio_func *func,
++	    unsigned int addr, void *src, int count);
++	void *buf;
++	unsigned long addr;
++	int len;
++	A_STATUS (*completion)(void *context, A_STATUS status);
++	void *context;
++};
++
++
++static HTC_CALLBACKS htcCallbacks;
++
++/*
++ * shutdown_lock prevents recursion through HIFShutDownDevice
++ */
++static DEFINE_MUTEX(shutdown_lock);
++
++
++/* ----- Request processing ------------------------------------------------ */
++
++
++static A_STATUS process_request(struct hif_request *req)
++{
++	int ret;
++	A_STATUS status;
++
++	dev_dbg(&req->func->dev, "process_request(req %p)\n", req);
++	sdio_claim_host(req->func);
++	if (req->read) {
++		ret = req->read(req->func, req->buf, req->addr, req->len);
++	} else {
++		ret = req->write(req->func, req->addr, req->buf, req->len);
++	}
++	sdio_release_host(req->func);
++	status = ret ? A_ERROR : A_OK;
++	if (req->completion)
++		req->completion(req->context, status);
++	kfree(req);
++	return status;
++}
++
++
++static void enqueue_request(struct hif_device *hif, struct hif_request *req)
++{
++	unsigned long flags;
++
++	dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req);
++	spin_lock_irqsave(&hif->queue_lock, flags);
++	list_add_tail(&req->list, &hif->queue);
++	spin_unlock_irqrestore(&hif->queue_lock, flags);
++	wake_up(&hif->wait);
++}
++
++
++static struct hif_request *dequeue_request(struct hif_device *hif)
++{
++	struct hif_request *req;
++	unsigned long flags;
++
++	spin_lock_irqsave(&hif->queue_lock, flags);
++	if (list_empty(&hif->queue))
++		req = NULL;
++	else {
++		req = list_first_entry(&hif->queue,
++		    struct hif_request, list);
++		list_del(&req->list);
++	}
++	spin_unlock_irqrestore(&hif->queue_lock, flags);
++	return req;
++}
++
++
++static void wait_queue_empty(struct hif_device *hif)
++{
++	unsigned long flags;
++	int empty;
++
++	while (1) {
++		spin_lock_irqsave(&hif->queue_lock, flags);
++		empty = list_empty(&hif->queue);
++		spin_unlock_irqrestore(&hif->queue_lock, flags);
++		if (empty)
++			break;
++		else
++			yield();
++	}
++}
++
++
++static int io(void *data)
++{
++	struct hif_device *hif = data;
++	struct sched_param param = { .sched_priority = 2 };
++		/* one priority level slower than ksdioirqd (which is at 1) */
++	DEFINE_WAIT(wait);
++	struct hif_request *req;
++
++	sched_setscheduler(current, SCHED_FIFO, &param);
++
++	while (1) {
++		while (1) {
++			/*
++			 * Since we never use signals here, one might think
++			 * that this ought to be TASK_UNINTERRUPTIBLE. However,
++			 * such a task would increase the load average and,
++			 * worse, it would trigger the softlockup check.
++			 */
++			prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE);
++			if (kthread_should_stop()) {
++				finish_wait(&hif->wait, &wait);
++				return 0;
++			}
++			req = dequeue_request(hif);
++			if (req)
++				break;
++			schedule();
++		}
++		finish_wait(&hif->wait, &wait);
++
++		(void) process_request(req);
++	}
++	return 0;
++}
++
++
++A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer,
++    A_UINT32 length, A_UINT32 request, void *context)
++{
++	struct device *dev = HIFGetOSDevice(hif);
++	struct hif_request *req;
++
++	dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, "
++	    "length %d, request 0x%x, context %p)\n",
++	    hif, address, buffer, length, request, context);
++
++	BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)));
++	BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)));
++	BUG_ON(!(request & (HIF_READ | HIF_WRITE)));
++	BUG_ON(!(request & HIF_EXTENDED_IO));
++
++	if (address >= HIF_MBOX_START_ADDR(0) &&
++	    address < HIF_MBOX_START_ADDR(MBOXES+1)) {
++		BUG_ON(length > HIF_MBOX_WIDTH);
++		/* Adjust the address so that the last byte falls on the EOM
++		   address. */
++		address += HIF_MBOX_WIDTH-length;
++	}
++
++	req = kzalloc(sizeof(*req), GFP_ATOMIC);
++	if (!req) {
++		if (request & HIF_ASYNCHRONOUS)
++			htcCallbacks.rwCompletionHandler(context, A_ERROR);
++		return A_ERROR;
++	}
++
++	req->func = hif->func;
++	req->addr = address;
++	req->buf = buffer;
++	req->len = length;
++
++	if (request & HIF_READ) {
++		if (request & HIF_FIXED_ADDRESS)
++			req->read = sdio_readsb;
++		else
++			req->read = sdio_memcpy_fromio;
++	} else {
++		if (request & HIF_FIXED_ADDRESS)
++			req->write = sdio_writesb;
++		else
++			req->write = sdio_memcpy_toio;
++	}
++
++	if (!(request & HIF_ASYNCHRONOUS))
++		return process_request(req);
++
++	req->completion = htcCallbacks.rwCompletionHandler;
++	req->context = context;
++	enqueue_request(hif, req);
++
++	return A_OK;
++}
++
++
++/* ----- Interrupt handling ------------------------------------------------ */
++
++/*
++ * Volatile ought to be good enough to make gcc do the right thing on S3C24xx.
++ * No need to use atomic or put barriers, keeping the code more readable.
++ *
++ * Warning: this story changes if going SMP/SMT.
++ */
++
++static volatile int masked = 1;
++static volatile int pending;
++static volatile int in_interrupt;
++
++
++static void ar6000_do_irq(struct sdio_func *func)
++{
++	HIF_DEVICE *hif = sdio_get_drvdata(func);
++	struct device *dev = HIFGetOSDevice(hif);
++	A_STATUS status;
++
++	dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler);
++
++	status = htcCallbacks.dsrHandler(hif->htc_handle);
++	BUG_ON(status != A_OK);
++}
++
++
++static void sdio_ar6000_irq(struct sdio_func *func)
++{
++	HIF_DEVICE *hif = sdio_get_drvdata(func);
++	struct device *dev = HIFGetOSDevice(hif);
++
++	dev_dbg(dev, "sdio_ar6000_irq\n");
++
++	in_interrupt = 1;
++	if (masked) {
++		in_interrupt = 0;
++		pending++;
++		return;
++	}
++	/*
++	 * @@@ This is ugly. If we don't drop the lock, we'll deadlock when
++	 * the handler tries to do SDIO. So there are four choices:
++	 *
++	 * 1) Break the call chain by calling the callback from a workqueue.
++	 *    Ugh.
++	 * 2) Make process_request aware that we already have the lock.
++	 * 3) Drop the lock. Which is ugly but should be safe as long as we're
++	 *    making sure the device doesn't go away.
++	 * 4) Change the AR6k driver such that it only issues asynchronous
++	 *    quests when called from an interrupt.
++	 *
++	 * Solution 2) is probably the best for now. Will try it later.
++	 */
++	sdio_release_host(func);
++	ar6000_do_irq(func);
++	sdio_claim_host(func);
++	in_interrupt = 0;
++}
++
++
++void HIFAckInterrupt(HIF_DEVICE *hif)
++{
++	struct device *dev = HIFGetOSDevice(hif);
++
++	dev_dbg(dev, "HIFAckInterrupt\n");
++	/* do nothing */
++}
++
++
++void HIFUnMaskInterrupt(HIF_DEVICE *hif)
++{
++	struct device *dev = HIFGetOSDevice(hif);
++
++	dev_dbg(dev, "HIFUnMaskInterrupt\n");
++	do {
++		masked = 1;
++		if (pending) {
++			pending = 0;
++			ar6000_do_irq(hif->func);
++			/* We may take an interrupt before unmasking and thus
++			   get it pending. In this case, we just loop back. */
++		}
++		masked = 0;
++	}
++	while (pending);
++}
++
++
++void HIFMaskInterrupt(HIF_DEVICE *hif)
++{
++	struct device *dev = HIFGetOSDevice(hif);
++
++	dev_dbg(dev, "HIFMaskInterrupt\n");
++	/*
++	 * Since sdio_ar6000_irq can also be called from a process context, we
++	 * may conceivably end up racing with it. Thus, we need to wait until
++	 * we can be sure that no concurrent interrupt processing is going on
++	 * before we return.
++	 *
++	 * Note: this may be a bit on the paranoid side - the callers may
++	 * actually be nice enough to disable scheduling. Check later.
++	 */
++	masked = 1;
++	while (in_interrupt)
++		yield();
++}
++
++
++/* ----- HIF API glue functions -------------------------------------------- */
++
++
++struct device *HIFGetOSDevice(HIF_DEVICE *hif)
++{
++	return &hif->func->dev;
++}
++
++
++void HIFSetHandle(void *hif_handle, void *handle)
++{
++	HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle;
++
++	hif->htc_handle = handle;
++}
++
++
++/* ----- Device configuration (HIF side) ----------------------------------- */
++
++
++A_STATUS HIFConfigureDevice(HIF_DEVICE *hif,
++    HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen)
++{
++	struct device *dev = HIFGetOSDevice(hif);
++	HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config;
++	A_UINT32 *mbs_cfg = config;
++	int i;
++
++	dev_dbg(dev, "HIFConfigureDevice\n");
++
++	switch (opcode) {
++	case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
++		for (i = 0; i != MBOXES; i++)
++			mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE;
++		break;
++	case HIF_DEVICE_GET_MBOX_ADDR:
++		for (i = 0; i != MBOXES; i++)
++			mbs_cfg[i] = HIF_MBOX_START_ADDR(i);
++		break;
++	case HIF_DEVICE_GET_IRQ_PROC_MODE:
++		*ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY;
++//		*ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC;
++		break;
++	default:
++		return A_ERROR;
++	}
++	return A_OK;
++}
++
++
++/* ----- Device probe and removal (Linux side) ----------------------------- */
++
++
++static int ar6000_do_activate(struct hif_device *hif)
++{
++	struct sdio_func *func = hif->func;
++	struct device *dev = &func->dev;
++	int ret;
++
++	dev_dbg(dev, "ar6000_do_activate\n");
++
++	sdio_claim_host(func);
++	sdio_enable_func(func);
++
++	INIT_LIST_HEAD(&hif->queue);
++	init_waitqueue_head(&hif->wait);
++	spin_lock_init(&hif->queue_lock);
++
++	ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
++	if (ret < 0) {
++		dev_err(dev, "sdio_set_block_size returns %d\n", ret);
++		goto out_enabled;
++	}
++	ret = sdio_claim_irq(func, sdio_ar6000_irq);
++	if (ret) {
++		dev_err(dev, "sdio_claim_irq returns %d\n", ret);
++		goto out_enabled;
++	}
++	/* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */
++#if 0
++	sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret);
++	if (ret) {
++		dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n",
++		    ret);
++		goto out_got_irq;
++	}
++#else
++	if (0) /* avoid warning */
++		goto out_got_irq;
++#endif
++
++	sdio_release_host(func);
++
++	hif->io_task = kthread_run(io, hif, "ar6000_io");
++	ret = IS_ERR(hif->io_task);
++	if (ret) {
++		dev_err(dev, "kthread_run(ar6000_io): %d\n", ret);
++		goto out_func_ready;
++	}
++
++	ret = htcCallbacks.deviceInsertedHandler(hif);
++	if (ret == A_OK)
++		return 0;
++
++	dev_err(dev, "deviceInsertedHandler: %d\n", ret);
++
++	ret = kthread_stop(hif->io_task);
++	if (ret)
++		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
++
++out_func_ready:
++	sdio_claim_host(func);
++
++out_got_irq:
++	sdio_release_irq(func);
++
++out_enabled:
++	sdio_disable_func(func);
++	sdio_release_host(func);
++
++	return ret;
++}
++
++
++static void ar6000_do_deactivate(struct hif_device *hif)
++{
++	struct sdio_func *func = hif->func;
++	struct device *dev = &func->dev;
++	int ret;
++
++	dev_dbg(dev, "ar6000_do_deactivate\n");
++	if (!hif->active)
++		return;
++
++	if (mutex_trylock(&shutdown_lock)) {
++		/*
++		 * Funny, Atheros' HIF does this call, but this just puts us in
++		 * a recursion through HTCShutDown/HIFShutDown if unloading the
++		 * module.
++		 *
++		 * However, we need it for suspend/resume. See the comment at
++		 * HIFShutDown, below.
++		 */
++		ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK);
++		if (ret != A_OK)
++			dev_err(dev, "deviceRemovedHandler: %d\n", ret);
++		mutex_unlock(&shutdown_lock);
++	}
++	wait_queue_empty(hif);
++	ret = kthread_stop(hif->io_task);
++	if (ret)
++		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
++	sdio_claim_host(func);
++	sdio_release_irq(func);
++	sdio_disable_func(func);
++	sdio_release_host(func);
++}
++
++
++static int ar6000_activate(struct hif_device *hif)
++{
++	int ret = 0;
++
++	dev_dbg(&hif->func->dev, "ar6000_activate\n");
++	mutex_lock(&hif->activate_lock);
++	if (!hif->active) {
++		ret = ar6000_do_activate(hif);
++		if (ret) {
++			printk(KERN_ERR "%s: Failed to activate %d\n",
++				__func__, ret);
++			goto out;
++		}
++		hif->active = 1;
++	}
++out:
++	mutex_unlock(&hif->activate_lock);
++	return ret;
++}
++
++
++static void ar6000_deactivate(struct hif_device *hif)
++{
++	dev_dbg(&hif->func->dev, "ar6000_deactivate\n");
++	mutex_lock(&hif->activate_lock);
++	if (hif->active) {
++		ar6000_do_deactivate(hif);
++		hif->active = 0;
++	}
++	mutex_unlock(&hif->activate_lock);
++}
++
++
++static int ar6000_rfkill_cb(void *data, int on)
++{
++	struct hif_device *hif = data;
++	struct sdio_func *func = hif->func;
++	struct device *dev = &func->dev;
++
++	dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on);
++	if (on)
++		return ar6000_activate(hif);
++	ar6000_deactivate(hif);
++	return 0;
++}
++
++
++static int sdio_ar6000_probe(struct sdio_func *func,
++    const struct sdio_device_id *id)
++{
++	struct device *dev = &func->dev;
++	struct hif_device *hif;
++	int ret = 0;
++
++	dev_dbg(dev, "sdio_ar6000_probe\n");
++	BUG_ON(!htcCallbacks.deviceInsertedHandler);
++
++	hif = kzalloc(sizeof(*hif), GFP_KERNEL);
++	if (!hif)
++		return -ENOMEM;
++
++	sdio_set_drvdata(func, hif);
++	hif->func = func;
++	mutex_init(&hif->activate_lock);
++	hif->active = 0;
++
++	if (gta02_wlan_query_rfkill_lock())
++		ret = ar6000_activate(hif);
++	if (!ret) {
++		gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif);
++		return 0;
++	}
++	gta02_wlan_query_rfkill_unlock();
++	sdio_set_drvdata(func, NULL);
++	kfree(hif);
++	return ret;
++}
++
++
++static void sdio_ar6000_remove(struct sdio_func *func)
++{
++	struct device *dev = &func->dev;
++	HIF_DEVICE *hif = sdio_get_drvdata(func);
++
++	dev_dbg(dev, "sdio_ar6000_remove\n");
++	gta02_wlan_clear_rfkill_cb();
++	ar6000_deactivate(hif);
++	sdio_set_drvdata(func, NULL);
++	kfree(hif);
++}
++
++
++/* ----- Device registration/unregistration (called by HIF) ---------------- */
++
++
++#define ATHEROS_SDIO_DEVICE(id, offset) \
++    SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset))
++
++static const struct sdio_device_id sdio_ar6000_ids[] = {
++	{ ATHEROS_SDIO_DEVICE(AR6002, 0)	},
++	{ ATHEROS_SDIO_DEVICE(AR6002, 0x1)	},
++	{ ATHEROS_SDIO_DEVICE(AR6001, 0x8)	},
++	{ ATHEROS_SDIO_DEVICE(AR6001, 0x9)	},
++	{ ATHEROS_SDIO_DEVICE(AR6001, 0xa)	},
++	{ ATHEROS_SDIO_DEVICE(AR6001, 0xb)	},
++	{ /* end: all zeroes */			},
++};
++
++MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids);
++
++
++static struct sdio_driver sdio_ar6000_driver = {
++	.probe		= sdio_ar6000_probe,
++	.remove		= sdio_ar6000_remove,
++	.name		= "sdio_ar6000",
++	.id_table	= sdio_ar6000_ids,
++};
++
++
++int HIFInit(HTC_CALLBACKS *callbacks)
++{
++	int ret;
++
++	BUG_ON(!callbacks);
++
++	printk(KERN_DEBUG "HIFInit\n");
++	htcCallbacks = *callbacks;
++
++	ret = sdio_register_driver(&sdio_ar6000_driver);
++	if (ret) {
++		printk(KERN_ERR
++		    "sdio_register_driver(sdio_ar6000_driver): %d\n", ret);
++		return A_ERROR;
++	}
++
++	return 0;
++}
++
++
++/*
++ * We have four possible call chains here:
++ *
++ * System shutdown/reboot:
++ *
++ *   kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown ->
++ *     mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove ->
++ *     ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   This is roughly the same sequence as suspend, described below.
++ *
++ * Module removal:
++ *
++ *   sys_delete_module -> ar6000_cleanup_module -> HTCShutDown ->
++ *     HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove ->
++ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate
++ *
++ *   In this case, HIFShutDownDevice must call sdio_unregister_driver to
++ *   notify the driver about its removal. ar6000_do_deactivate must not call
++ *   deviceRemovedHandler, because that would loop back into HIFShutDownDevice.
++ *
++ * Suspend:
++ *
++ *   device_suspend ...> s3cmci_suspend ...> sdio_bus_remove ->
++ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   We must call deviceRemovedHandler to inform the ar6k stack that the device
++ *   has been removed. Since HTCTargetRemovedHandler calls back into
++ *   HIFShutDownDevice, we must also prevent the call to
++ *   sdio_unregister_driver, or we'd end up recursing into the SDIO stack,
++ *   eventually deadlocking somewhere.
++ *
++ * rfkill:
++ *
++ *   rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio ->
++ *   ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   This is similar to suspend - only the entry point changes.
++ */
++
++void HIFShutDownDevice(HIF_DEVICE *hif)
++{
++	/* Beware, HTCShutDown calls us with hif == NULL ! */
++	if (mutex_trylock(&shutdown_lock)) {
++		sdio_unregister_driver(&sdio_ar6000_driver);
++		mutex_unlock(&shutdown_lock);
++	}
++}
+diff --git a/drivers/ar6000/hif/hif_internal.h b/drivers/ar6000/hif/hif_internal.h
+new file mode 100644
+index 0000000..d8fc101
+--- /dev/null
++++ b/drivers/ar6000/hif/hif_internal.h
+@@ -0,0 +1,102 @@
++/*
++ * @file: hif_internal.h
++ *
++ * @abstract: internal header file for hif layer
++ *
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <linux/sdio/ctsystem.h>
++#include <linux/sdio/sdio_busdriver.h>
++#include <linux/sdio/_sdio_defs.h>
++#include <linux/sdio/sdio_lib.h>
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "hif.h"
++
++#define MANUFACTURER_ID_AR6001_BASE        0x100
++#define MANUFACTURER_ID_AR6002_BASE        0x200
++#define FUNCTION_CLASS                     0x0
++#define MANUFACTURER_CODE                  0x271
++
++#define BUS_REQUEST_MAX_NUM                64
++
++#define SDIO_CLOCK_FREQUENCY_DEFAULT       25000000
++#define SDWLAN_ENABLE_DISABLE_TIMEOUT      20
++#define FLAGS_CARD_ENAB                    0x02
++#define FLAGS_CARD_IRQ_UNMSK               0x04
++
++#define HIF_MBOX_BLOCK_SIZE                128
++#define HIF_MBOX_BASE_ADDR                 0x800
++#define HIF_MBOX_WIDTH                     0x800
++#define HIF_MBOX0_BLOCK_SIZE               1
++#define HIF_MBOX1_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++#define HIF_MBOX2_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++#define HIF_MBOX3_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++
++#define HIF_MBOX_START_ADDR(mbox)                        \
++    HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH
++
++#define HIF_MBOX_END_ADDR(mbox)	                         \
++    HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1
++
++struct hif_device {
++    SDDEVICE *handle;
++    void *htc_handle;
++    OSKERNEL_HELPER insert_helper;
++    BOOL  helper_started;
++};
++
++typedef struct target_function_context {
++    SDFUNCTION           function; /* function description of the bus driver */
++    OS_SEMAPHORE         instanceSem; /* instance lock. Unused */
++    SDLIST               instanceList; /* list of instances. Unused */
++} TARGET_FUNCTION_CONTEXT;
++
++typedef struct bus_request {
++    struct bus_request *next;
++    SDREQUEST *request;
++    void *context;
++} BUS_REQUEST;
++
++BOOL
++hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device);
++
++void
++hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device);
++
++SDREQUEST *
++hifAllocateDeviceRequest(SDDEVICE *device);
++
++void
++hifFreeDeviceRequest(SDREQUEST *request);
++
++void
++hifRWCompletionHandler(SDREQUEST *request);
++
++void
++hifIRQHandler(void *context);
++
++HIF_DEVICE *
++addHifDevice(SDDEVICE *handle);
++
++HIF_DEVICE *
++getHifDevice(SDDEVICE *handle);
++
++void
++delHifDevice(SDDEVICE *handle);
+diff --git a/drivers/ar6000/htc/ar6k.c b/drivers/ar6000/htc/ar6k.c
+new file mode 100644
+index 0000000..72472ab
+--- /dev/null
++++ b/drivers/ar6000/htc/ar6k.c
+@@ -0,0 +1,991 @@
++/*
++ * AR6K device layer that handles register level I/O
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "hif.h"
++#include "htc_packet.h"
++#include "ar6k.h"
++
++#define MAILBOX_FOR_BLOCK_SIZE 1
++
++extern A_UINT32 resetok;
++
++static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
++static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
++
++#define LOCK_AR6K(p)      A_MUTEX_LOCK(&(p)->Lock);
++#define UNLOCK_AR6K(p)    A_MUTEX_UNLOCK(&(p)->Lock);
++
++void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
++{
++    LOCK_AR6K(pDev);
++    HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
++    UNLOCK_AR6K(pDev);
++}
++
++HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
++{
++    HTC_PACKET *pPacket;
++
++    LOCK_AR6K(pDev);
++    pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
++    UNLOCK_AR6K(pDev);
++
++    return pPacket;
++}
++
++A_STATUS DevSetup(AR6K_DEVICE *pDev)
++{
++    A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
++    A_UINT32 blocksizes[AR6K_MAILBOXES];
++    A_STATUS status = A_OK;
++    int      i;
++
++    AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
++    AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
++
++    do {
++            /* give a handle to HIF for this target */
++        HIFSetHandle(pDev->HIFDevice, (void *)pDev);
++            /* initialize our free list of IO packets */
++        INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
++        A_MUTEX_INIT(&pDev->Lock);
++
++            /* get the addresses for all 4 mailboxes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
++                                    mailboxaddrs, sizeof(mailboxaddrs));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* carve up register I/O packets (these are for ASYNC register I/O ) */
++        for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
++            HTC_PACKET *pIOPacket;
++            pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
++            SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
++                                          pDev,
++                                          pDev->RegIOBuffers[i].Buffer,
++                                          AR6K_REG_IO_BUFFER_SIZE,
++                                          0); /* don't care */
++            AR6KFreeIOPacket(pDev,pIOPacket);
++        }
++
++            /* get the address of the mailbox we are using */
++        pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
++
++            /* get the block sizes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    blocksizes, sizeof(blocksizes));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
++             * size on mailbox 0 is artificially set to 1.  So we use the block size that is set
++             * for the other 3 mailboxes */
++        pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
++            /* must be a power of 2 */
++        AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
++
++            /* assemble mask, used for padding to a block */
++        pDev->BlockMask = pDev->BlockSize - 1;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
++                    pDev->BlockSize, pDev->MailboxAddress));
++
++        pDev->GetPendingEventsFunc = NULL;
++            /* see if the HIF layer implements the get pending events function  */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
++                           &pDev->GetPendingEventsFunc,
++                           sizeof(pDev->GetPendingEventsFunc));
++
++            /* assume we can process HIF interrupt events asynchronously */
++        pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
++
++            /* see if the HIF layer overrides this assumption */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_IRQ_PROC_MODE,
++                           &pDev->HifIRQProcessingMode,
++                           sizeof(pDev->HifIRQProcessingMode));
++
++        switch (pDev->HifIRQProcessingMode) {
++            case HIF_DEVICE_IRQ_SYNC_ONLY:
++                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
++                break;
++            case HIF_DEVICE_IRQ_ASYNC_SYNC:
++                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
++                break;
++            default:
++                AR_DEBUG_ASSERT(FALSE);
++        }
++
++        pDev->HifMaskUmaskRecvEvent = NULL;
++
++            /* see if the HIF layer implements the mask/unmask recv events function  */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
++                           &pDev->HifMaskUmaskRecvEvent,
++                           sizeof(pDev->HifMaskUmaskRecvEvent));
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
++                 (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
++
++        status = DevDisableInterrupts(pDev);
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++            /* make sure handle is cleared */
++        HIFSetHandle(pDev->HIFDevice, NULL);
++    }
++
++    return status;
++
++}
++
++static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
++{
++    A_STATUS                  status;
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++    LOCK_AR6K(pDev);
++
++        /* Enable all the interrupts except for the dragon interrupt */
++    pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
++                                      INT_STATUS_ENABLE_CPU_SET(0x01) |
++                                      INT_STATUS_ENABLE_COUNTER_SET(0x01);
++
++    if (NULL == pDev->GetPendingEventsFunc) {
++        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    } else {
++        /* The HIF layer provided us with a pending events function which means that
++         * the detection of pending mbox messages is handled in the HIF layer.
++         * This is the case for the SPI2 interface.
++         * In the normal case we enable MBOX interrupts, for the case
++         * with HIFs that offer this mechanism, we keep these interrupts
++         * masked */
++        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    }
++
++
++    /* Set up the CPU Interrupt Status Register */
++    pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
++
++    /* Set up the Error Interrupt Status Register */
++    pDev->IrqEnableRegisters.error_status_enable =
++                                  ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
++                                  ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
++
++    /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
++    pDev->IrqEnableRegisters.counter_int_status_enable =
++        COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
++
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++    UNLOCK_AR6K(pDev);
++
++        /* always synchronous */
++    status = HIFReadWrite(pDev->HIFDevice,
++                          INT_STATUS_ENABLE_ADDRESS,
++                          &regs.int_status_enable,
++                          AR6K_IRQ_ENABLE_REGS_SIZE,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        /* Can't write it for some reason */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                        ("Failed to update interrupt control registers err: %d\n", status));
++
++    }
++
++    return status;
++}
++
++static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
++{
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++    LOCK_AR6K(pDev);
++        /* Disable all interrupts */
++    pDev->IrqEnableRegisters.int_status_enable = 0;
++    pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
++    pDev->IrqEnableRegisters.error_status_enable = 0;
++    pDev->IrqEnableRegisters.counter_int_status_enable = 0;
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++    UNLOCK_AR6K(pDev);
++
++        /* always synchronous */
++    return HIFReadWrite(pDev->HIFDevice,
++                        INT_STATUS_ENABLE_ADDRESS,
++                        &regs.int_status_enable,
++                        AR6K_IRQ_ENABLE_REGS_SIZE,
++                        HIF_WR_SYNC_BYTE_INC,
++                        NULL);
++}
++
++/* enable device interrupts */
++A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
++{
++        /* Unmask the host controller interrupts */
++    HIFUnMaskInterrupt(pDev->HIFDevice);
++
++    return DevEnableInterrupts(pDev);
++}
++
++/* disable all device interrupts */
++A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++
++    status = DevDisableInterrupts(pDev);
++
++    if (A_SUCCESS(status)) {
++            /* Disable the interrupt at the HIF layer */
++        HIFMaskInterrupt(pDev->HIFDevice);
++    }
++
++    return status;
++}
++
++/* callback when our fetch to enable/disable completes */
++static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    if (A_FAILED(pPacket->Status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Failed to disable receiver, status:%d \n", pPacket->Status));
++    }
++        /* free this IO packet */
++    AR6KFreeIOPacket(pDev,pPacket);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
++}
++
++/* disable packet reception (used in case the host runs out of buffers)
++ * this is the "override" method when the HIF reports another methods to
++ * disable recv events */
++static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
++{
++    A_STATUS                  status = A_OK;
++    HTC_PACKET                *pIOPacket = NULL;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
++            EnableRecv,AsyncMode));
++
++    do {
++
++        if (AsyncMode) {
++
++            pIOPacket = AR6KAllocIOPacket(pDev);
++
++            if (NULL == pIOPacket) {
++                status = A_NO_MEMORY;
++                AR_DEBUG_ASSERT(FALSE);
++                break;
++            }
++
++                /* stick in our completion routine when the I/O operation completes */
++            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
++            pIOPacket->pContext = pDev;
++
++                /* call the HIF layer override and do this asynchronously */
++            status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
++                                                 EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
++                                                 pIOPacket);
++            break;
++        }
++
++            /* if we get here we are doing it synchronously */
++        status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
++                                             EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
++                                             NULL);
++
++    } while (FALSE);
++
++    if (A_FAILED(status) && (pIOPacket != NULL)) {
++        AR6KFreeIOPacket(pDev,pIOPacket);
++    }
++
++    return status;
++}
++
++/* disable packet reception (used in case the host runs out of buffers)
++ * this is the "normal" method using the interrupt enable registers through
++ * the host I/F */
++static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
++{
++    A_STATUS                  status = A_OK;
++    HTC_PACKET                *pIOPacket = NULL;
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++        /* take the lock to protect interrupt enable shadows */
++    LOCK_AR6K(pDev);
++
++    if (EnableRecv) {
++        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    } else {
++        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    }
++
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++    UNLOCK_AR6K(pDev);
++
++    do {
++
++        if (AsyncMode) {
++
++            pIOPacket = AR6KAllocIOPacket(pDev);
++
++            if (NULL == pIOPacket) {
++                status = A_NO_MEMORY;
++                AR_DEBUG_ASSERT(FALSE);
++                break;
++            }
++
++                /* copy values to write to our async I/O buffer */
++            A_MEMCPY(pIOPacket->pBuffer,&regs,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++                /* stick in our completion routine when the I/O operation completes */
++            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
++            pIOPacket->pContext = pDev;
++
++                /* write it out asynchronously */
++            HIFReadWrite(pDev->HIFDevice,
++                         INT_STATUS_ENABLE_ADDRESS,
++                         pIOPacket->pBuffer,
++                         AR6K_IRQ_ENABLE_REGS_SIZE,
++                         HIF_WR_ASYNC_BYTE_INC,
++                         pIOPacket);
++            break;
++        }
++
++        /* if we get here we are doing it synchronously */
++
++        status = HIFReadWrite(pDev->HIFDevice,
++                              INT_STATUS_ENABLE_ADDRESS,
++                              &regs.int_status_enable,
++                              AR6K_IRQ_ENABLE_REGS_SIZE,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++    } while (FALSE);
++
++    if (A_FAILED(status) && (pIOPacket != NULL)) {
++        AR6KFreeIOPacket(pDev,pIOPacket);
++    }
++
++    return status;
++}
++
++
++A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
++{
++    if (NULL == pDev->HifMaskUmaskRecvEvent) {
++        return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
++    } else {
++        return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
++    }
++}
++
++A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
++{
++    if (NULL == pDev->HifMaskUmaskRecvEvent) {
++        return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
++    } else {
++        return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
++    }
++}
++
++void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
++                      AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
++{
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
++
++    if (pIrqProcRegs != NULL) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Int Status:               0x%x\n",pIrqProcRegs->host_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("CPU Int Status:            0x%x\n",pIrqProcRegs->cpu_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Error Int Status:          0x%x\n",pIrqProcRegs->error_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Counter Int Status:        0x%x\n",pIrqProcRegs->counter_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Mbox Frame:                0x%x\n",pIrqProcRegs->mbox_frame));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead Valid:        0x%x\n",pIrqProcRegs->rx_lookahead_valid));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead 0:            0x%x\n",pIrqProcRegs->rx_lookahead[0]));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead 1:            0x%x\n",pIrqProcRegs->rx_lookahead[1]));
++    }
++
++    if (pIrqEnableRegs != NULL) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Int Status Enable:         0x%x\n",pIrqEnableRegs->int_status_enable));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
++    }
++}
++
++
++#ifdef MBOXHW_UNIT_TEST
++
++
++/* This is a mailbox hardware unit test that must be called in a schedulable context
++ * This test is very simple, it will send a list of buffers with a counting pattern
++ * and the target will invert the data and send the message back
++ *
++ * the unit test has the following constraints:
++ *
++ * The target has at least 8 buffers of 256 bytes each. The host will send
++ * the following pattern of buffers in rapid succession :
++ *
++ * 1 buffer - 128 bytes
++ * 1 buffer - 256 bytes
++ * 1 buffer - 512 bytes
++ * 1 buffer - 1024 bytes
++ *
++ * The host will send the buffers to one mailbox and wait for buffers to be reflected
++ * back from the same mailbox. The target sends the buffers FIFO order.
++ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
++ *
++ *
++ * Note:  To simplifythe test , we assume that the chosen buffer sizes
++ *        will fall on a nice block pad
++ *
++ * It is expected that higher-order tests will be written to stress the mailboxes using
++ * a message-based protocol (with some performance timming) that can create more
++ * randomness in the packets sent over mailboxes.
++ *
++ * */
++
++#define A_ROUND_UP_PWR2(x, align)    (((int) (x) + ((align)-1)) & ~((align)-1))
++
++#define BUFFER_BLOCK_PAD 128
++
++#if 0
++#define BUFFER1 128
++#define BUFFER2 256
++#define BUFFER3 512
++#define BUFFER4 1024
++#endif
++
++#if 1
++#define BUFFER1 80
++#define BUFFER2 200
++#define BUFFER3 444
++#define BUFFER4 800
++#endif
++
++#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
++
++#define TEST_BYTES (BUFFER1 +  BUFFER2 + BUFFER3 + BUFFER4)
++
++#define TEST_CREDITS_RECV_TIMEOUT 100
++
++static A_UINT8  g_Buffer[TOTAL_BYTES];
++static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
++static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
++
++#define BUFFER_PROC_LIST_DEPTH 4
++
++typedef struct _BUFFER_PROC_LIST{
++    A_UINT8  *pBuffer;
++    A_UINT32 length;
++}BUFFER_PROC_LIST;
++
++
++#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
++{                                                   \
++    (pList)->pBuffer = (pCurrpos);                  \
++    (pList)->length = (len);                        \
++    (pCurrpos) += (len);                            \
++    (pList)++;                                      \
++}
++
++/* a simple and crude way to send different "message" sizes */
++static void AssembleBufferList(BUFFER_PROC_LIST *pList)
++{
++    A_UINT8 *pBuffer = g_Buffer;
++
++#if BUFFER_PROC_LIST_DEPTH < 4
++#error "Buffer processing list depth is not deep enough!!"
++#endif
++
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
++
++}
++
++#define FILL_ZERO     TRUE
++#define FILL_COUNTING FALSE
++static void InitBuffers(A_BOOL Zero)
++{
++    A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
++    int      i;
++
++        /* fill buffer with 16 bit counting pattern or zeros */
++    for (i = 0; i <  (TOTAL_BYTES / 2) ; i++) {
++        if (!Zero) {
++            pBuffer16[i] = (A_UINT16)i;
++        } else {
++            pBuffer16[i] = 0;
++        }
++    }
++}
++
++
++static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
++{
++    int      i;
++    A_UINT16 startCount;
++    A_BOOL   success = TRUE;
++
++        /* get the starting count */
++    startCount = pBuffer16[0];
++        /* invert it, this is the expected value */
++    startCount = ~startCount;
++        /* scan the buffer and verify */
++    for (i = 0; i < (Length / 2) ; i++,startCount++) {
++            /* target will invert all the data */
++        if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
++            success = FALSE;
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
++                        pBuffer16[i], ((A_UINT16)~startCount), i, Length));
++             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
++                        pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
++            break;
++        }
++    }
++
++    return success;
++}
++
++static A_BOOL CheckBuffers(void)
++{
++    int      i;
++    A_BOOL   success = TRUE;
++    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
++
++        /* assemble the list */
++    AssembleBufferList(checkList);
++
++        /* scan the buffers and verify */
++    for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
++        success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
++        if (!success) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
++                        (A_UINT32)checkList[i].pBuffer, checkList[i].length));
++            break;
++        }
++    }
++
++    return success;
++}
++
++    /* find the end marker for the last buffer we will be sending */
++static A_UINT16 GetEndMarker(void)
++{
++    A_UINT8  *pBuffer;
++    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
++
++        /* fill up buffers with the normal counting pattern */
++    InitBuffers(FILL_COUNTING);
++
++        /* assemble the list we will be sending down */
++    AssembleBufferList(checkList);
++        /* point to the last 2 bytes of the last buffer */
++    pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
++
++        /* the last count in the last buffer is the marker */
++    return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
++}
++
++#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
++
++/* send the ordered buffers to the target */
++static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS         status = A_OK;
++    A_UINT32         request = HIF_WR_SYNC_BLOCK_INC;
++    BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
++    int              i;
++    int              totalBytes = 0;
++    int              paddedLength;
++    int              totalwPadding = 0;
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
++
++        /* fill buffer with counting pattern */
++    InitBuffers(FILL_COUNTING);
++
++        /* assemble the order in which we send */
++    AssembleBufferList(sendList);
++
++    for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
++
++            /* we are doing block transfers, so we need to pad everything to a block size */
++        paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
++                       (~(g_BlockSizes[mbox] - 1));
++
++            /* send each buffer synchronously */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              g_MailboxAddrs[mbox],
++                              sendList[i].pBuffer,
++                              paddedLength,
++                              request,
++                              NULL);
++        if (status != A_OK) {
++            break;
++        }
++        totalBytes += sendList[i].length;
++        totalwPadding += paddedLength;
++    }
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
++
++    return status;
++}
++
++/* poll the mailbox credit counter until we get a credit or timeout */
++static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
++{
++    A_STATUS status = A_OK;
++    int      timeout = TEST_CREDITS_RECV_TIMEOUT;
++    A_UINT8  credits = 0;
++    A_UINT32 address;
++
++    while (TRUE) {
++
++            /* Read the counter register to get credits, this auto-decrements  */
++        address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
++        status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
++                              HIF_RD_SYNC_BYTE_FIX, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
++            status = A_ERROR;
++            break;
++        }
++
++        if (credits) {
++            break;
++        }
++
++        timeout--;
++
++        if (timeout <= 0) {
++              AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
++            status = A_ERROR;
++            break;
++        }
++
++         /* delay a little, target may not be ready */
++         msleep(1000);
++
++    }
++
++    if (status == A_OK) {
++        *pCredits = credits;
++    }
++
++    return status;
++}
++
++
++/* wait for the buffers to come back */
++static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS         status = A_OK;
++    A_UINT32         request = HIF_RD_SYNC_BLOCK_INC;
++    BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
++    int              curBuffer;
++    int              credits;
++    int              i;
++    int              totalBytes = 0;
++    int              paddedLength;
++    int              totalwPadding = 0;
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
++
++        /* zero the buffers */
++    InitBuffers(FILL_ZERO);
++
++        /* assemble the order in which we should receive */
++    AssembleBufferList(recvList);
++
++    curBuffer = 0;
++
++    while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
++
++            /* get number of buffers that have been completed, this blocks
++             * until we get at least 1 credit or it times out */
++        status = GetCredits(pDev, mbox, &credits);
++
++        if (status != A_OK) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
++
++            /* get all the buffers that are sitting on the queue */
++        for (i = 0; i < credits; i++) {
++            AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
++                /* recv the current buffer synchronously, the buffers should come back in
++                 * order... with padding applied by the target */
++            paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
++                       (~(g_BlockSizes[mbox] - 1));
++
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  g_MailboxAddrs[mbox],
++                                  recvList[curBuffer].pBuffer,
++                                  paddedLength,
++                                  request,
++                                  NULL);
++            if (status != A_OK) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
++                        recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
++                break;
++            }
++
++            totalwPadding += paddedLength;
++            totalBytes += recvList[curBuffer].length;
++            curBuffer++;
++        }
++
++        if (status != A_OK) {
++            break;
++        }
++            /* go back and get some more */
++        credits = 0;
++    }
++
++    if (totalBytes != TEST_BYTES) {
++        AR_DEBUG_ASSERT(FALSE);
++    }  else {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
++            mbox, totalBytes, totalwPadding));
++    }
++
++    return status;
++
++
++}
++
++static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS status;
++
++    do {
++            /* send out buffers */
++        status = SendBuffers(pDev,mbox);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
++            break;
++        }
++
++            /* go get them, this will block */
++        status =  RecvBuffers(pDev, mbox);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
++            break;
++        }
++
++            /* check the returned data patterns */
++        if (!CheckBuffers()) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
++            status = A_ERROR;
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
++
++    }  while (FALSE);
++
++    return status;
++}
++
++/* here is where the test starts */
++A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
++{
++    int      i;
++    A_STATUS status;
++    int      credits = 0;
++    A_UINT8  params[4];
++    int      numBufs;
++    int      bufferSize;
++    A_UINT16 temp;
++
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START -  \n"));
++
++    do {
++            /* get the addresses for all 4 mailboxes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
++                                    g_MailboxAddrs, sizeof(g_MailboxAddrs));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* get the block sizes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    g_BlockSizes, sizeof(g_BlockSizes));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* note, the HIF layer usually reports mbox 0 to have a block size of
++             * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
++             * the same. */
++        g_BlockSizes[0] = g_BlockSizes[1];
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
++
++        if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
++            AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
++                g_BlockSizes[1], BUFFER_BLOCK_PAD));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
++
++            /* the target lets us know it is ready by giving us 1 credit on
++             * mailbox 0 */
++        status = GetCredits(pDev, 0, &credits);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
++
++            /* read the first 4 scratch registers */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS,
++                              params,
++                              4,
++                              HIF_RD_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
++            break;
++        }
++
++        numBufs = params[0];
++        bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
++            ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
++            numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
++
++        if ((numBufs * bufferSize) < TOTAL_BYTES) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
++                TOTAL_BYTES, (numBufs*bufferSize)));
++            status = A_ERROR;
++            break;
++        }
++
++        temp = GetEndMarker();
++
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS + 4,
++                              (A_UINT8 *)&temp,
++                              2,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
++
++        temp = (A_UINT16)g_BlockSizes[1];
++            /* convert to a mask */
++        temp = temp - 1;
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS + 6,
++                              (A_UINT8 *)&temp,
++                              2,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
++
++            /* execute the test on each mailbox */
++        for (i = 0; i < AR6K_MAILBOXES; i++) {
++            status = DoOneMboxHWTest(pDev, i);
++            if (status != A_OK) {
++                break;
++            }
++        }
++
++    } while (FALSE);
++
++    if (status == A_OK) {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! -  \n"));
++    } else {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! -  \n"));
++    }
++        /* don't let HTC_Start continue, the target is actually not running any HTC code */
++    return A_ERROR;
++}
++#endif
++
++
++
+diff --git a/drivers/ar6000/htc/ar6k.h b/drivers/ar6000/htc/ar6k.h
+new file mode 100644
+index 0000000..301ab34
+--- /dev/null
++++ b/drivers/ar6000/htc/ar6k.h
+@@ -0,0 +1,191 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef AR6K_H_
++#define AR6K_H_
++
++#define AR6K_MAILBOXES 4
++
++/* HTC runs over mailbox 0 */
++#define HTC_MAILBOX          0
++
++#define AR6K_TARGET_DEBUG_INTR_MASK     0x01
++
++#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK |   \
++                            INT_STATUS_ENABLE_CPU_MASK   |   \
++                            INT_STATUS_ENABLE_COUNTER_MASK)
++
++//#define MBOXHW_UNIT_TEST 1
++
++#include "athstartpack.h"
++typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS {
++    A_UINT8                      host_int_status;
++    A_UINT8                      cpu_int_status;
++    A_UINT8                      error_int_status;
++    A_UINT8                      counter_int_status;
++    A_UINT8                      mbox_frame;
++    A_UINT8                      rx_lookahead_valid;
++    A_UINT8                      hole[2];
++    A_UINT32                     rx_lookahead[2];
++} POSTPACK AR6K_IRQ_PROC_REGISTERS;
++
++#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS)
++
++
++
++typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS {
++    A_UINT8                      int_status_enable;
++    A_UINT8                      cpu_int_status_enable;
++    A_UINT8                      error_status_enable;
++    A_UINT8                      counter_int_status_enable;
++} POSTPACK AR6K_IRQ_ENABLE_REGISTERS;
++
++#include "athendpack.h"
++
++#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS)
++
++#define AR6K_REG_IO_BUFFER_SIZE     32
++#define AR6K_MAX_REG_IO_BUFFERS     8
++
++/* buffers for ASYNC I/O */
++typedef struct AR6K_ASYNC_REG_IO_BUFFER {
++    HTC_PACKET    HtcPacket;   /* we use an HTC packet as a wrapper for our async register-based I/O */
++    A_UINT8       Buffer[AR6K_REG_IO_BUFFER_SIZE];
++} AR6K_ASYNC_REG_IO_BUFFER;
++
++typedef struct _AR6K_DEVICE {
++    A_MUTEX_T                   Lock;
++    AR6K_IRQ_PROC_REGISTERS     IrqProcRegisters;
++    AR6K_IRQ_ENABLE_REGISTERS   IrqEnableRegisters;
++    void                        *HIFDevice;
++    A_UINT32                    BlockSize;
++    A_UINT32                    BlockMask;
++    A_UINT32                    MailboxAddress;
++    HIF_PENDING_EVENTS_FUNC     GetPendingEventsFunc;
++    void                        *HTCContext;
++    HTC_PACKET_QUEUE            RegisterIOList;
++    AR6K_ASYNC_REG_IO_BUFFER    RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS];
++    void                        (*TargetFailureCallback)(void *Context);
++    A_STATUS                    (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
++    HIF_DEVICE_IRQ_PROCESSING_MODE  HifIRQProcessingMode;
++    HIF_MASK_UNMASK_RECV_EVENT      HifMaskUmaskRecvEvent;
++} AR6K_DEVICE;
++
++#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY)
++
++A_STATUS DevSetup(AR6K_DEVICE *pDev);
++A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev);
++A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev);
++A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
++                            A_UINT32    *pLookAhead,
++                            int          TimeoutMS);
++A_STATUS DevRWCompletionHandler(void *context, A_STATUS status);
++A_STATUS DevDsrHandler(void *context);
++A_STATUS DevCheckPendingRecvMsgsAsync(void *context);
++void     DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
++                          AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs);
++
++#define DEV_STOP_RECV_ASYNC TRUE
++#define DEV_STOP_RECV_SYNC  FALSE
++#define DEV_ENABLE_RECV_ASYNC TRUE
++#define DEV_ENABLE_RECV_SYNC  FALSE
++A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
++A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
++
++static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) {
++    A_UINT32 paddedLength;
++    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
++    A_STATUS status;
++
++       /* adjust the length to be a multiple of block size if appropriate */
++    paddedLength = (SendLength + (pDev->BlockMask)) &
++                    (~(pDev->BlockMask));
++#if 0 // BufferLength may not be set in , fix this...
++    if (paddedLength > pPacket->BufferLength) {
++        AR_DEBUG_ASSERT(FALSE);
++        if (pPacket->Completion != NULL) {
++            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
++        }
++        return A_EINVAL;
++    }
++#endif
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
++                paddedLength,
++                pDev->MailboxAddress,
++                sync ? "SYNC" : "ASYNC"));
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          pDev->MailboxAddress,
++                          pPacket->pBuffer,
++                          paddedLength,     /* the padded length */
++                          sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC,
++                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
++
++    if (sync) {
++        pPacket->Status = status;
++    }
++
++    return status;
++}
++
++static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) {
++    A_UINT32 paddedLength;
++    A_STATUS status;
++    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
++
++        /* adjust the length to be a multiple of block size if appropriate */
++    paddedLength = (RecvLength + (pDev->BlockMask)) &
++                    (~(pDev->BlockMask));
++    if (paddedLength > pPacket->BufferLength) {
++        AR_DEBUG_ASSERT(FALSE);
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n",
++                    paddedLength,RecvLength,pPacket->BufferLength));
++        if (pPacket->Completion != NULL) {
++            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
++        }
++        return A_EINVAL;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
++                paddedLength,
++                pDev->MailboxAddress,
++                sync ? "SYNC" : "ASYNC"));
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          pDev->MailboxAddress,
++                          pPacket->pBuffer,
++                          paddedLength,
++                          sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC,
++                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
++
++    if (sync) {
++        pPacket->Status = status;
++    }
++
++    return status;
++}
++
++#ifdef MBOXHW_UNIT_TEST
++A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev);
++#endif
++
++#endif /*AR6K_H_*/
+diff --git a/drivers/ar6000/htc/ar6k_events.c b/drivers/ar6000/htc/ar6k_events.c
+new file mode 100644
+index 0000000..91b29af
+--- /dev/null
++++ b/drivers/ar6000/htc/ar6k_events.c
+@@ -0,0 +1,638 @@
++/*
++ * AR6K Driver layer event handling (i.e. interrupts, message polling)
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "hif.h"
++#include "htc_packet.h"
++#include "ar6k.h"
++
++extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket);
++extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev);
++
++static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev);
++
++#define DELAY_PER_INTERVAL_MS 10  /* 10 MS delay per polling interval */
++
++/* completion routine for ALL HIF layer async I/O */
++A_STATUS DevRWCompletionHandler(void *context, A_STATUS status)
++{
++    HTC_PACKET *pPacket = (HTC_PACKET *)context;
++
++    COMPLETE_HTC_PACKET(pPacket,status);
++
++    return A_OK;
++}
++
++/* mailbox recv message polling */
++A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
++                            A_UINT32    *pLookAhead,
++                            int          TimeoutMS)
++{
++    A_STATUS status = A_OK;
++    int      timeout = TimeoutMS/DELAY_PER_INTERVAL_MS;
++
++    AR_DEBUG_ASSERT(timeout > 0);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n"));
++
++    while (TRUE) {
++
++        if (pDev->GetPendingEventsFunc != NULL)
++		{
++
++            HIF_PENDING_EVENTS_INFO events;
++
++            /* the HIF layer uses a special mechanism to get events, do this
++             * synchronously */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                            &events,
++                                            NULL);
++            if (A_FAILED(status))
++			{
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n"));
++				break;
++            }
++
++            if (events.Events & HIF_RECV_MSG_AVAIL)
++			{
++                    /*  there is a message available, the lookahead should be valid now */
++                *pLookAhead = events.LookAhead;
++
++                break;
++            }
++        }
++		else
++		{
++
++                /* this is the standard HIF way.... */
++                /* load the register table */
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  HOST_INT_STATUS_ADDRESS,
++                                  (A_UINT8 *)&pDev->IrqProcRegisters,
++                                  AR6K_IRQ_PROC_REGS_SIZE,
++                                  HIF_RD_SYNC_BYTE_INC,
++                                  NULL);
++
++            if (A_FAILED(status))
++			{
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n"));
++                break;
++            }
++
++                /* check for MBOX data and valid lookahead */
++            if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX))
++			{
++                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX))
++				{
++                    /* mailbox has a message and the look ahead is valid */
++                    *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
++                    break;
++                }
++            }
++
++        }
++
++        timeout--;
++
++        if (timeout <= 0)
++		{
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n"));
++            status = A_ERROR;
++
++                /* check if the target asserted */
++            if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
++                    /* target signaled an assert, process this pending interrupt
++                     * this will call the target failure handler */
++                DevServiceDebugInterrupt(pDev);
++            }
++
++            break;
++        }
++
++            /* delay a little  */
++         msleep(DELAY_PER_INTERVAL_MS);
++         AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("  Retry Mbox Poll : %d \n",timeout));
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n"));
++
++    return status;
++}
++
++static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++    A_UINT8  cpu_int_status;
++    A_UINT8  regBuffer[4];
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n"));
++    cpu_int_status = pDev->IrqProcRegisters.cpu_int_status &
++                     pDev->IrqEnableRegisters.cpu_int_status_enable;
++    AR_DEBUG_ASSERT(cpu_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
++                    cpu_int_status));
++
++        /* Clear the interrupt */
++    pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */
++
++        /* set up the register transfer buffer to hit the register 4 times , this is done
++         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
++         * restrict bus transfer lengths to be a multiple of 4-bytes */
++
++        /* set W1C value to clear the interrupt, this hits the register first */
++    regBuffer[0] = cpu_int_status;
++        /* the remaining 4 values are set to zero which have no-effect  */
++    regBuffer[1] = 0;
++    regBuffer[2] = 0;
++    regBuffer[3] = 0;
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          CPU_INT_STATUS_ADDRESS,
++                          regBuffer,
++                          4,
++                          HIF_WR_SYNC_BYTE_FIX,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++
++static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++    A_UINT8  error_int_status;
++    A_UINT8  regBuffer[4];
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n"));
++    error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F;
++    AR_DEBUG_ASSERT(error_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
++                    error_int_status));
++
++    if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) {
++        /* Wakeup */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n"));
++    }
++
++    if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) {
++        /* Rx Underflow */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n"));
++    }
++
++    if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) {
++        /* Tx Overflow */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n"));
++    }
++
++        /* Clear the interrupt */
++    pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */
++
++        /* set up the register transfer buffer to hit the register 4 times , this is done
++         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
++         * restrict bus transfer lengths to be a multiple of 4-bytes */
++
++        /* set W1C value to clear the interrupt, this hits the register first */
++    regBuffer[0] = error_int_status;
++        /* the remaining 4 values are set to zero which have no-effect  */
++    regBuffer[1] = 0;
++    regBuffer[2] = 0;
++    regBuffer[3] = 0;
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          ERROR_INT_STATUS_ADDRESS,
++                          regBuffer,
++                          4,
++                          HIF_WR_SYNC_BYTE_FIX,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev)
++{
++    A_UINT32 dummy;
++    A_STATUS status;
++
++    /* Send a target failure event to the application */
++    AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n"));
++
++    if (pDev->TargetFailureCallback != NULL) {
++        pDev->TargetFailureCallback(pDev->HTCContext);
++    }
++
++    /* clear the interrupt , the debug error interrupt is
++     * counter 0 */
++        /* read counter to clear interrupt */
++    status = HIFReadWrite(pDev->HIFDevice,
++                          COUNT_DEC_ADDRESS,
++                          (A_UINT8 *)&dummy,
++                          4,
++                          HIF_RD_SYNC_BYTE_INC,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev)
++{
++    A_UINT8 counter_int_status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n"));
++
++    counter_int_status = pDev->IrqProcRegisters.counter_int_status &
++                         pDev->IrqEnableRegisters.counter_int_status_enable;
++
++    AR_DEBUG_ASSERT(counter_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
++                    counter_int_status));
++
++    /* Check if the debug interrupt is pending */
++    if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
++        return DevServiceDebugInterrupt(pDev);
++    }
++
++    return A_OK;
++}
++
++/* callback when our fetch to get interrupt status registers completes */
++static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
++    A_UINT32    lookAhead = 0;
++    A_BOOL      otherInts = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    do {
++
++        if (A_FAILED(pPacket->Status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    (" GetEvents I/O request failed, status:%d \n", pPacket->Status));
++            /* bail out, don't unmask HIF interrupt */
++            break;
++        }
++
++        if (pDev->GetPendingEventsFunc != NULL) {
++                /* the HIF layer collected the information for us */
++            HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer;
++            if (pEvents->Events & HIF_RECV_MSG_AVAIL) {
++                lookAhead = pEvents->LookAhead;
++                if (0 == lookAhead) {
++                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n"));
++                }
++            }
++            if (pEvents->Events & HIF_OTHER_EVENTS) {
++                otherInts = TRUE;
++            }
++        } else {
++                /* standard interrupt table handling.... */
++            AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer;
++            A_UINT8                 host_int_status;
++
++            host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable;
++
++            if (host_int_status & (1 << HTC_MAILBOX)) {
++                host_int_status &= ~(1 << HTC_MAILBOX);
++                if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) {
++                        /* mailbox has a message and the look ahead is valid */
++                    lookAhead = pReg->rx_lookahead[HTC_MAILBOX];
++                    if (0 == lookAhead) {
++                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n"));
++                    }
++                }
++            }
++
++            if (host_int_status) {
++                    /* there are other interrupts to handle */
++                otherInts = TRUE;
++            }
++        }
++
++        if (otherInts || (lookAhead == 0)) {
++            /* if there are other interrupts to process, we cannot do this in the async handler so
++             * ack the interrupt which will cause our sync handler to run again
++             * if however there are no more messages, we can now ack the interrupt  */
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n",
++                otherInts, lookAhead));
++            HIFAckInterrupt(pDev->HIFDevice);
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n",
++                    lookAhead));
++                /* lookahead is non-zero and there are no other interrupts to service,
++                 * go get the next message */
++            pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL);
++        }
++
++    } while (FALSE);
++
++        /* free this IO packet */
++    AR6KFreeIOPacket(pDev,pPacket);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n"));
++}
++
++/* called by the HTC layer when it wants us to check if the device has any more pending
++ * recv messages, this starts off a series of async requests to read interrupt registers  */
++A_STATUS DevCheckPendingRecvMsgsAsync(void *context)
++{
++    AR6K_DEVICE  *pDev = (AR6K_DEVICE *)context;
++    A_STATUS      status = A_OK;
++    HTC_PACKET   *pIOPacket;
++
++    /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can
++     * cause us to switch contexts */
++
++   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++   do {
++
++        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
++                /* break the async processing chain right here, no need to continue.
++                 * The DevDsrHandler() will handle things in a loop when things are driven
++                 * synchronously  */
++            break;
++        }
++            /* first allocate one of our HTC packets we created for async I/O
++             * we reuse HTC packet definitions so that we can use the completion mechanism
++             * in DevRWCompletionHandler() */
++        pIOPacket = AR6KAllocIOPacket(pDev);
++
++        if (NULL == pIOPacket) {
++                /* there should be only 1 asynchronous request out at a time to read these registers
++                 * so this should actually never happen */
++            status = A_NO_MEMORY;
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* stick in our completion routine when the I/O operation completes */
++        pIOPacket->Completion = DevGetEventAsyncHandler;
++        pIOPacket->pContext = pDev;
++
++        if (pDev->GetPendingEventsFunc) {
++                /* HIF layer has it's own mechanism, pass the IO to it.. */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                                (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer,
++                                                pIOPacket);
++
++        } else {
++                /* standard way, read the interrupt register table asynchronously again */
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  HOST_INT_STATUS_ADDRESS,
++                                  pIOPacket->pBuffer,
++                                  AR6K_IRQ_PROC_REGS_SIZE,
++                                  HIF_RD_ASYNC_BYTE_INC,
++                                  pIOPacket);
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n"));
++   } while (FALSE);
++
++   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n"));
++
++   return status;
++}
++
++/* process pending interrupts synchronously */
++static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing)
++{
++    A_STATUS    status = A_OK;
++    A_UINT8     host_int_status = 0;
++    A_UINT32    lookAhead = 0;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    /*** NOTE: the HIF implementation guarantees that the context of this call allows
++     *         us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that
++     *         can block or switch thread/task ontexts.
++     *         This is a fully schedulable context.
++     * */
++    do {
++
++        if (pDev->GetPendingEventsFunc != NULL) {
++            HIF_PENDING_EVENTS_INFO events;
++
++                /* the HIF layer uses a special mechanism to get events
++                 * get this synchronously  */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                                &events,
++                                                NULL);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++            if (events.Events & HIF_RECV_MSG_AVAIL) {
++                lookAhead = events.LookAhead;
++                if (0 == lookAhead) {
++                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n"));
++                }
++            }
++
++            if (!(events.Events & HIF_OTHER_EVENTS) ||
++                !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) {
++                    /* no need to read the register table, no other interesting interrupts.
++                     * Some interfaces (like SPI) can shadow interrupt sources without
++                     * requiring the host to do a full table read */
++                break;
++            }
++
++            /* otherwise fall through and read the register table */
++        }
++
++        /*
++         * Read the first 28 bytes of the HTC register table. This will yield us
++         * the value of different int status registers and the lookahead
++         * registers.
++         *    length = sizeof(int_status) + sizeof(cpu_int_status) +
++         *             sizeof(error_int_status) + sizeof(counter_int_status) +
++         *             sizeof(mbox_frame) + sizeof(rx_lookahead_valid) +
++         *             sizeof(hole) +  sizeof(rx_lookahead) +
++         *             sizeof(int_status_enable) + sizeof(cpu_int_status_enable) +
++         *             sizeof(error_status_enable) +
++         *             sizeof(counter_int_status_enable);
++         *
++        */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              HOST_INT_STATUS_ADDRESS,
++                              (A_UINT8 *)&pDev->IrqProcRegisters,
++                              AR6K_IRQ_PROC_REGS_SIZE,
++                              HIF_RD_SYNC_BYTE_INC,
++                              NULL);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) {
++            DevDumpRegisters(&pDev->IrqProcRegisters,
++                             &pDev->IrqEnableRegisters);
++        }
++
++            /* Update only those registers that are enabled */
++        host_int_status = pDev->IrqProcRegisters.host_int_status &
++                          pDev->IrqEnableRegisters.int_status_enable;
++
++        if (NULL == pDev->GetPendingEventsFunc) {
++                /* only look at mailbox status if the HIF layer did not provide this function,
++                 * on some HIF interfaces reading the RX lookahead is not valid to do */
++            if (host_int_status & (1 << HTC_MAILBOX)) {
++                    /* mask out pending mailbox value, we use "lookAhead" as the real flag for
++                     * mailbox processing below */
++                host_int_status &= ~(1 << HTC_MAILBOX);
++                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) {
++                        /* mailbox has a message and the look ahead is valid */
++                    lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
++                    if (0 == lookAhead) {
++                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n"));
++                    }
++                }
++            }
++        } else {
++                /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/
++            host_int_status &= ~(1 << HTC_MAILBOX);
++        }
++
++    } while (FALSE);
++
++
++    do {
++
++            /* did the interrupt status fetches succeed? */
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if ((0 == host_int_status) && (0 == lookAhead)) {
++                /* nothing to process, the caller can use this to break out of a loop */
++            *pDone = TRUE;
++            break;
++        }
++
++        if (lookAhead != 0) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead));
++                /* Mailbox Interrupt, the HTC layer may issue async requests to empty the
++                 * mailbox...
++                 * When emptying the recv mailbox we use the async handler above called from the
++                 * completion routine of the callers read request. This can improve performance
++                 * by reducing context switching when we rapidly pull packets */
++            status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing);
++            if (A_FAILED(status)) {
++                break;
++            }
++        }
++
++            /* now handle the rest of them */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                            (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n",
++                            host_int_status));
++
++        if (HOST_INT_STATUS_CPU_GET(host_int_status)) {
++                /* CPU Interrupt */
++            status = DevServiceCPUInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++        if (HOST_INT_STATUS_ERROR_GET(host_int_status)) {
++                /* Error Interrupt */
++            status = DevServiceErrorInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++        if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) {
++                /* Counter Interrupt */
++            status = DevServiceCounterInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n",
++                *pDone, *pASyncProcessing, status));
++
++    return status;
++}
++
++
++/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/
++A_STATUS DevDsrHandler(void *context)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
++    A_STATUS    status = A_OK;
++    A_BOOL      done = FALSE;
++    A_BOOL      asyncProc = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++
++    while (!done) {
++        status = ProcessPendingIRQs(pDev, &done, &asyncProc);
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
++            /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */
++            asyncProc = FALSE;
++            /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers.
++             * this has a nice side effect of blocking us until all async read requests are completed.
++             * This behavior is required on some HIF implementations that do not allow ASYNC
++             * processing in interrupt handlers (like Windows CE) */
++        }
++
++        if (asyncProc) {
++                /* the function performed some async I/O for performance, we
++                   need to exit the ISR immediately, the check below will prevent the interrupt from being
++                   Ack'd while we handle it asynchronously */
++            break;
++        }
++
++    }
++
++    if (A_SUCCESS(status) && !asyncProc) {
++            /* Ack the interrupt only if :
++             *  1. we did not get any errors in processing interrupts
++             *  2. there are no outstanding async processing requests */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n"));
++        HIFAckInterrupt(pDev->HIFDevice);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n"));
++    return A_OK;
++}
++
++
+diff --git a/drivers/ar6000/htc/htc.c b/drivers/ar6000/htc/htc.c
+new file mode 100644
+index 0000000..d52ed94
+--- /dev/null
++++ b/drivers/ar6000/htc/htc.c
+@@ -0,0 +1,508 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++
++static HTC_INIT_INFO  HTCInitInfo = {NULL,NULL,NULL};
++static A_BOOL         HTCInitialized = FALSE;
++
++static A_STATUS HTCTargetInsertedHandler(void *hif_handle);
++static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status);
++static void HTCReportFailure(void *Context);
++
++/* Initializes the HTC layer */
++A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo)
++{
++    HTC_CALLBACKS htcCallbacks;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n"));
++    if (HTCInitialized) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
++        return A_OK;
++    }
++
++    A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO));
++
++    A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS));
++
++        /* setup HIF layer callbacks */
++    htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler;
++    htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler;
++        /* the device layer handles these */
++    htcCallbacks.rwCompletionHandler = DevRWCompletionHandler;
++    htcCallbacks.dsrHandler = DevDsrHandler;
++    HIFInit(&htcCallbacks);
++    HTCInitialized = TRUE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
++    return A_OK;
++}
++
++void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList)
++{
++    LOCK_HTC(target);
++    HTC_PACKET_ENQUEUE(pList,pPacket);
++    UNLOCK_HTC(target);
++}
++
++HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target,  HTC_PACKET_QUEUE *pList)
++{
++    HTC_PACKET *pPacket;
++
++    LOCK_HTC(target);
++    pPacket = HTC_PACKET_DEQUEUE(pList);
++    UNLOCK_HTC(target);
++
++    return pPacket;
++}
++
++/* cleanup the HTC instance */
++static void HTCCleanup(HTC_TARGET *target)
++{
++    if (A_IS_MUTEX_VALID(&target->HTCLock)) {
++        A_MUTEX_DELETE(&target->HTCLock);
++    }
++
++    if (A_IS_MUTEX_VALID(&target->HTCRxLock)) {
++        A_MUTEX_DELETE(&target->HTCRxLock);
++    }
++
++    if (A_IS_MUTEX_VALID(&target->HTCTxLock)) {
++        A_MUTEX_DELETE(&target->HTCTxLock);
++    }
++        /* free our instance */
++    A_FREE(target);
++}
++
++/* registered target arrival callback from the HIF layer */
++static A_STATUS HTCTargetInsertedHandler(void *hif_handle)
++{
++    HTC_TARGET              *target = NULL;
++    A_STATUS                 status;
++    int                      i;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n"));
++
++    do {
++
++            /* allocate target memory */
++        if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n"));
++            status = A_ERROR;
++            break;
++        }
++
++        A_MEMZERO(target, sizeof(HTC_TARGET));
++        A_MUTEX_INIT(&target->HTCLock);
++        A_MUTEX_INIT(&target->HTCRxLock);
++        A_MUTEX_INIT(&target->HTCTxLock);
++        INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList);
++        INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList);
++
++            /* give device layer the hif device handle */
++        target->Device.HIFDevice = hif_handle;
++            /* give the device layer our context (for event processing)
++             * the device layer will register it's own context with HIF
++             * so we need to set this so we can fetch it in the target remove handler */
++        target->Device.HTCContext = target;
++            /* set device layer target failure callback */
++        target->Device.TargetFailureCallback = HTCReportFailure;
++            /* set device layer recv message pending callback */
++        target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler;
++        target->EpWaitingForBuffers = ENDPOINT_MAX;
++
++            /* setup device layer */
++        status = DevSetup(&target->Device);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* carve up buffers/packets for control messages */
++        for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) {
++            HTC_PACKET *pControlPacket;
++            pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
++            SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket,
++                                          target,
++                                          target->HTCControlBuffers[i].Buffer,
++                                          HTC_CONTROL_BUFFER_SIZE,
++                                          ENDPOINT_0);
++            HTC_FREE_CONTROL_RX(target,pControlPacket);
++        }
++
++        for (;i < NUM_CONTROL_BUFFERS;i++) {
++             HTC_PACKET *pControlPacket;
++             pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
++             INIT_HTC_PACKET_INFO(pControlPacket,
++                                  target->HTCControlBuffers[i].Buffer,
++                                  HTC_CONTROL_BUFFER_SIZE);
++             HTC_FREE_CONTROL_TX(target,pControlPacket);
++        }
++
++    } while (FALSE);
++
++    if (A_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n"));
++            /* announce ourselves */
++        HTCInitInfo.AddInstance((HTC_HANDLE)target);
++    } else {
++        if (target != NULL) {
++            HTCCleanup(target);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n"));
++
++    return status;
++}
++
++/* registered removal callback from the HIF layer */
++static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status)
++{
++    HTC_TARGET *target;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle));
++
++    if (NULL == handle) {
++            /* this could be NULL in the event that target initialization failed */
++        return A_OK;
++    }
++
++    target = ((AR6K_DEVICE *)handle)->HTCContext;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("   removing target:0x%X instance:0x%X ... \n",
++            (A_UINT32)target, (A_UINT32)target->pInstanceContext));
++
++    if (target->pInstanceContext != NULL) {
++            /* let upper layer know, it needs to call HTCStop() */
++        HTCInitInfo.DeleteInstance(target->pInstanceContext);
++    }
++
++    HIFShutDownDevice(target->Device.HIFDevice);
++
++    HTCCleanup(target);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n"));
++    return A_OK;
++}
++
++/* get the low level HIF device for the caller , the caller may wish to do low level
++ * HIF requests */
++void *HTCGetHifDevice(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    return target->Device.HIFDevice;
++}
++
++/* set the instance block for this HTC handle, so that on removal, the blob can be
++ * returned to the caller */
++void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance)
++{
++    HTC_TARGET  *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++
++    target->pInstanceContext = Instance;
++}
++
++/* wait for the target to arrive (sends HTC Ready message)
++ * this operation is fully synchronous and the message is polled for */
++A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET              *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_STATUS                 status;
++    HTC_PACKET              *pPacket = NULL;
++    HTC_READY_MSG           *pRdyMsg;
++    HTC_SERVICE_CONNECT_REQ  connect;
++    HTC_SERVICE_CONNECT_RESP resp;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target));
++
++    do {
++
++#ifdef MBOXHW_UNIT_TEST
++
++        status = DoMboxHWTest(&target->Device);
++
++        if (status != A_OK) {
++            break;
++        }
++
++#endif
++
++            /* we should be getting 1 control message that the target is ready */
++        status = HTCWaitforControlMessage(target, &pPacket);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n"));
++            break;
++        }
++
++            /* we controlled the buffer creation so it has to be properly aligned */
++        pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer;
++
++        if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) ||
++            (pPacket->ActualLength < sizeof(HTC_READY_MSG))) {
++                /* this message is not valid */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) {
++              /* this message is not valid */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        target->TargetCredits = pRdyMsg->CreditCount;
++        target->TargetCreditSize = pRdyMsg->CreditSize;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n",
++                target->TargetCredits, target->TargetCreditSize));
++
++            /* setup our pseudo HTC control endpoint connection */
++        A_MEMZERO(&connect,sizeof(connect));
++        A_MEMZERO(&resp,sizeof(resp));
++        connect.EpCallbacks.pContext = target;
++        connect.EpCallbacks.EpTxComplete = HTCControlTxComplete;
++        connect.EpCallbacks.EpRecv = HTCControlRecv;
++        connect.EpCallbacks.EpRecvRefill = NULL;  /* not needed */
++        connect.EpCallbacks.EpSendFull = NULL;    /* not needed */
++        connect.EpCallbacks.EpSendAvail = NULL;   /* not needed */
++        connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS;
++        connect.ServiceID = HTC_CTRL_RSVD_SVC;
++
++            /* connect fake service */
++        status = HTCConnectService((HTC_HANDLE)target,
++                                   &connect,
++                                   &resp);
++
++        if (!A_FAILED(status)) {
++            break;
++        }
++
++    } while (FALSE);
++
++    if (pPacket != NULL) {
++        HTC_FREE_CONTROL_RX(target,pPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n"));
++
++    return status;
++}
++
++
++
++/* Start HTC, enable interrupts and let the target know host has finished setup */
++A_STATUS HTCStart(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_PACKET *pPacket;
++    A_STATUS   status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n"));
++
++        /* now that we are starting, push control receive buffers into the
++         * HTC control endpoint */
++
++    while (1) {
++        pPacket = HTC_ALLOC_CONTROL_RX(target);
++        if (NULL == pPacket) {
++            break;
++        }
++        HTCAddReceivePkt((HTC_HANDLE)target,pPacket);
++    }
++
++    do {
++
++        AR_DEBUG_ASSERT(target->InitCredits != NULL);
++        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL);
++        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL);
++
++            /* call init credits callback to do the distribution ,
++             * NOTE: the first entry in the distribution list is ENDPOINT_0, so
++             * we pass the start of the list after this one. */
++        target->InitCredits(target->pCredDistContext,
++                            target->EpCreditDistributionListHead->pNext,
++                            target->TargetCredits);
++
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) {
++            DumpCreditDistStates(target);
++        }
++
++            /* the caller is done connecting to services, so we can indicate to the
++            * target that the setup phase is complete */
++        status = HTCSendSetupComplete(target);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* unmask interrupts */
++        status = DevUnmaskInterrupts(&target->Device);
++
++        if (A_FAILED(status)) {
++            HTCStop(target);
++        }
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n"));
++    return status;
++}
++
++
++/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */
++void HTCStop(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n"));
++
++        /* mark that we are shutting down .. */
++    target->HTCStateFlags |= HTC_STATE_STOPPING;
++
++        /* Masking interrupts is a synchronous operation, when this function returns
++         * all pending HIF I/O has completed, we can safely flush the queues */
++    DevMaskInterrupts(&target->Device);
++
++        /* flush all send packets */
++    HTCFlushSendPkts(target);
++        /* flush all recv buffers */
++    HTCFlushRecvBuffers(target);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n"));
++}
++
++/* undo what was done in HTCInit() */
++void HTCShutDown(void)
++{
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n"));
++    HTCInitialized = FALSE;
++        /* undo HTCInit */
++    HIFShutDownDevice(NULL);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n"));
++}
++
++void HTCDumpCreditStates(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++
++    LOCK_HTC_TX(target);
++
++    DumpCreditDistStates(target);
++
++    UNLOCK_HTC_TX(target);
++}
++
++/* report a target failure from the device, this is a callback from the device layer
++ * which uses a mechanism to report errors from the target (i.e. special interrupts) */
++static void HTCReportFailure(void *Context)
++{
++    HTC_TARGET *target = (HTC_TARGET *)Context;
++
++    target->TargetFailure = TRUE;
++
++    if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) {
++            /* let upper layer know, it needs to call HTCStop() */
++        HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR);
++    }
++}
++
++void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription)
++{
++    A_CHAR stream[60];
++    A_UINT32 i;
++    A_UINT16 offset, count;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription));
++
++    count = 0;
++    offset = 0;
++    for(i = 0; i < length; i++) {
++        sprintf(stream + offset, "%2.2X ", buffer[i]);
++        count ++;
++        offset += 3;
++
++        if(count == 16) {
++            count = 0;
++            offset = 0;
++            AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
++            A_MEMZERO(stream, 60);
++        }
++    }
++
++    if(offset != 0) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n"));
++}
++
++A_BOOL HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
++                                HTC_ENDPOINT_ID          Endpoint,
++                                HTC_ENDPOINT_STAT_ACTION Action,
++                                HTC_ENDPOINT_STATS       *pStats)
++{
++
++#ifdef HTC_EP_STAT_PROFILING
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_BOOL     clearStats = FALSE;
++    A_BOOL     sample = FALSE;
++
++    switch (Action) {
++        case HTC_EP_STAT_SAMPLE :
++            sample = TRUE;
++            break;
++        case HTC_EP_STAT_SAMPLE_AND_CLEAR :
++            sample = TRUE;
++            clearStats = TRUE;
++            break;
++        case HTC_EP_STAT_CLEAR :
++            clearStats = TRUE;
++            break;
++        default:
++            break;
++    }
++
++    A_ASSERT(Endpoint < ENDPOINT_MAX);
++
++        /* lock out TX and RX while we sample and/or clear */
++    LOCK_HTC_TX(target);
++    LOCK_HTC_RX(target);
++
++    if (sample) {
++        A_ASSERT(pStats != NULL);
++            /* return the stats to the caller */
++        A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
++    }
++
++    if (clearStats) {
++            /* reset stats */
++        A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
++    }
++
++    UNLOCK_HTC_RX(target);
++    UNLOCK_HTC_TX(target);
++
++    return TRUE;
++#else
++    return FALSE;
++#endif
++}
+diff --git a/drivers/ar6000/htc/htc_debug.h b/drivers/ar6000/htc/htc_debug.h
+new file mode 100644
+index 0000000..08080be
+--- /dev/null
++++ b/drivers/ar6000/htc/htc_debug.h
+@@ -0,0 +1,65 @@
++#ifndef HTC_DEBUG_H_
++#define HTC_DEBUG_H_
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/* ------- Debug related stuff ------- */
++enum {
++    ATH_DEBUG_SEND = 0x0001,
++    ATH_DEBUG_RECV = 0x0002,
++    ATH_DEBUG_SYNC = 0x0004,
++    ATH_DEBUG_DUMP = 0x0008,
++    ATH_DEBUG_IRQ  = 0x0010,
++    ATH_DEBUG_TRC  = 0x0020,
++    ATH_DEBUG_WARN = 0x0040,
++    ATH_DEBUG_ERR  = 0x0080,
++    ATH_DEBUG_ANY  = 0xFFFF,
++};
++
++#ifdef DEBUG
++
++// TODO FIX usage of A_PRINTF!
++#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
++#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
++    if (debughtc & ATH_DEBUG_DUMP) {             \
++        DebugDumpBytes(buffer, length,desc);               \
++    }                                            \
++} while(0)
++#define PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(flags, args) do {        \
++    if (debughtc & (flags)) {                    \
++        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
++    }                                            \
++} while (0)
++#define AR_DEBUG_ASSERT(test) do {               \
++    if (!(test)) {                               \
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
++    }                                            \
++} while(0)
++extern int debughtc;
++#else
++#define AR_DEBUG_PRINTF(flags, args)
++#define AR_DEBUG_PRINTBUF(buffer, length, desc)
++#define AR_DEBUG_ASSERT(test)
++#define AR_DEBUG_LVL_CHECK(lvl) 0
++#endif
++
++void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
++
++#endif /*HTC_DEBUG_H_*/
+diff --git a/drivers/ar6000/htc/htc_internal.h b/drivers/ar6000/htc/htc_internal.h
+new file mode 100644
+index 0000000..ebb8ac1
+--- /dev/null
++++ b/drivers/ar6000/htc/htc_internal.h
+@@ -0,0 +1,168 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _HTC_INTERNAL_H_
++#define _HTC_INTERNAL_H_
++
++/* for debugging, uncomment this to capture the last frame header, on frame header
++ * processing errors, the last frame header is dump for comparison */
++//#define HTC_CAPTURE_LAST_FRAME
++
++//#define HTC_EP_STAT_PROFILING
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "htc.h"
++#include "htc_api.h"
++#include "bmi_msg.h"
++#include "hif.h"
++#include "ar6k.h"
++
++/* HTC operational parameters */
++#define HTC_TARGET_RESPONSE_TIMEOUT        2000 /* in ms */
++#define HTC_TARGET_DEBUG_INTR_MASK         0x01
++#define HTC_TARGET_CREDIT_INTR_MASK        0xF0
++
++typedef struct _HTC_ENDPOINT {
++    HTC_SERVICE_ID              ServiceID;      /* service ID this endpoint is bound to
++                                                   non-zero value means this endpoint is in use */
++    HTC_PACKET_QUEUE            TxQueue;        /* HTC frame buffer TX queue */
++    HTC_PACKET_QUEUE            RxBuffers;      /* HTC frame buffer RX list */
++    HTC_ENDPOINT_CREDIT_DIST    CreditDist;     /* credit distribution structure (exposed to driver layer) */
++    HTC_EP_CALLBACKS            EpCallBacks;    /* callbacks associated with this endpoint */
++    int                         MaxTxQueueDepth;   /* max depth of the TX queue before we need to
++                                                      call driver's full handler */
++    int                         CurrentTxQueueDepth; /* current TX queue depth */
++    int                         MaxMsgLength;        /* max length of endpoint message */
++#ifdef HTC_EP_STAT_PROFILING
++    HTC_ENDPOINT_STATS          EndPointStats;  /* endpoint statistics */
++#endif
++} HTC_ENDPOINT;
++
++#ifdef HTC_EP_STAT_PROFILING
++#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count);
++#else
++#define INC_HTC_EP_STAT(p,stat,count)
++#endif
++
++#define HTC_SERVICE_TX_PACKET_TAG  HTC_TX_PACKET_TAG_INTERNAL
++
++#define NUM_CONTROL_BUFFERS     8
++#define NUM_CONTROL_TX_BUFFERS  2
++#define NUM_CONTROL_RX_BUFFERS  (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS)
++
++#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH)
++
++typedef struct HTC_CONTROL_BUFFER {
++    HTC_PACKET    HtcPacket;
++    A_UINT8       Buffer[HTC_CONTROL_BUFFER_SIZE];
++} HTC_CONTROL_BUFFER;
++
++/* our HTC target state */
++typedef struct _HTC_TARGET {
++    HTC_ENDPOINT                EndPoint[ENDPOINT_MAX];
++    HTC_CONTROL_BUFFER          HTCControlBuffers[NUM_CONTROL_BUFFERS];
++    HTC_ENDPOINT_CREDIT_DIST   *EpCreditDistributionListHead;
++    HTC_PACKET_QUEUE            ControlBufferTXFreeList;
++    HTC_PACKET_QUEUE            ControlBufferRXFreeList;
++    HTC_CREDIT_DIST_CALLBACK    DistributeCredits;
++    HTC_CREDIT_INIT_CALLBACK    InitCredits;
++    void                       *pCredDistContext;
++    int                         TargetCredits;
++    int                         TargetCreditSize;
++    A_MUTEX_T                   HTCLock;
++    A_MUTEX_T                   HTCRxLock;
++    A_MUTEX_T                   HTCTxLock;
++    AR6K_DEVICE                 Device;         /* AR6K - specific state */
++    A_UINT32                    HTCStateFlags;
++    HTC_ENDPOINT_ID             EpWaitingForBuffers;
++    A_BOOL                      TargetFailure;
++    void                       *pInstanceContext;
++#define HTC_STATE_WAIT_BUFFERS  (1 << 0)
++#define HTC_STATE_STOPPING      (1 << 1)
++#ifdef HTC_CAPTURE_LAST_FRAME
++    HTC_FRAME_HDR               LastFrameHdr;  /* useful for debugging */
++    A_UINT8                     LastTrailer[256];
++    A_UINT8                     LastTrailerLength;
++#endif
++} HTC_TARGET;
++
++#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING)
++#define LOCK_HTC(t)      A_MUTEX_LOCK(&(t)->HTCLock);
++#define UNLOCK_HTC(t)    A_MUTEX_UNLOCK(&(t)->HTCLock);
++#define LOCK_HTC_RX(t)   A_MUTEX_LOCK(&(t)->HTCRxLock);
++#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock);
++#define LOCK_HTC_TX(t)   A_MUTEX_LOCK(&(t)->HTCTxLock);
++#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock);
++
++#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd))
++#define HTC_RECYCLE_RX_PKT(target,p)                \
++{                                                   \
++    HTC_PACKET_RESET_RX(pPacket);                   \
++    HTCAddReceivePkt((HTC_HANDLE)(target),(p));     \
++}
++
++/* internal HTC functions */
++void        HTCControlTxComplete(void *Context, HTC_PACKET *pPacket);
++void        HTCControlRecv(void *Context, HTC_PACKET *pPacket);
++A_STATUS    HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket);
++HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList);
++void        HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList);
++A_STATUS    HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags);
++A_STATUS    HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket);
++void        HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket);
++A_STATUS    HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
++void        HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint);
++A_STATUS    HTCSendSetupComplete(HTC_TARGET *target);
++void        HTCFlushRecvBuffers(HTC_TARGET *target);
++void        HTCFlushSendPkts(HTC_TARGET *target);
++void        DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist);
++void        DumpCreditDistStates(HTC_TARGET *target);
++void 		DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
++
++static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) {
++    HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList);
++    if (pPacket != NULL) {
++            /* set payload pointer area with some headroom */
++        pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH;
++    }
++    return pPacket;
++}
++
++#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList)
++#define HTC_ALLOC_CONTROL_RX(t)  HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList)
++#define HTC_FREE_CONTROL_RX(t,p) \
++{                                                                \
++    HTC_PACKET_RESET_RX(p);                                      \
++    HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \
++}
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HTC_INTERNAL_H_ */
+diff --git a/drivers/ar6000/htc/htc_recv.c b/drivers/ar6000/htc/htc_recv.c
+new file mode 100644
+index 0000000..4be2b08
+--- /dev/null
++++ b/drivers/ar6000/htc/htc_recv.c
+@@ -0,0 +1,703 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++#define HTCIssueRecv(t, p) \
++    DevRecvPacket(&(t)->Device,  \
++                  (p),          \
++                  (p)->ActualLength)
++
++#define DO_RCV_COMPLETION(t,p,e)            \
++{                                           \
++    if ((p)->ActualLength > 0) {            \
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \
++            (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint));  \
++        (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext,      \
++                                (p));                           \
++    } else {                                                    \
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n"));  \
++        HTC_RECYCLE_RX_PKT((t), (p));                           \
++    }                                                           \
++}
++
++#ifdef HTC_EP_STAT_PROFILING
++#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)            \
++{                                                      \
++    LOCK_HTC_RX((t));                                  \
++    INC_HTC_EP_STAT((ep), RxReceived, 1);              \
++    if ((lookAhead) != 0) {                            \
++        INC_HTC_EP_STAT((ep), RxLookAheads, 1);        \
++    }                                                  \
++    UNLOCK_HTC_RX((t));                                \
++}
++#else
++#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)
++#endif
++
++static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target,
++                                         A_UINT8    *pBuffer,
++                                         int         Length,
++                                         A_UINT32   *pNextLookAhead,
++                                         HTC_ENDPOINT_ID FromEndpoint)
++{
++    HTC_RECORD_HDR          *pRecord;
++    A_UINT8                 *pRecordBuf;
++    HTC_LOOKAHEAD_REPORT    *pLookAhead;
++    A_UINT8                 *pOrigBuffer;
++    int                     origLength;
++    A_STATUS                status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length));
++
++    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++        AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer");
++    }
++
++    pOrigBuffer = pBuffer;
++    origLength = Length;
++    status = A_OK;
++
++    while (Length > 0) {
++
++        if (Length < sizeof(HTC_RECORD_HDR)) {
++            status = A_EPROTO;
++            break;
++        }
++            /* these are byte aligned structs */
++        pRecord = (HTC_RECORD_HDR *)pBuffer;
++        Length -= sizeof(HTC_RECORD_HDR);
++        pBuffer += sizeof(HTC_RECORD_HDR);
++
++        if (pRecord->Length > Length) {
++                /* no room left in buffer for record */
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" invalid record length: %d (id:%d) buffer has: %d bytes left \n",
++                        pRecord->Length, pRecord->RecordID, Length));
++            status = A_EPROTO;
++            break;
++        }
++            /* start of record follows the header */
++        pRecordBuf = pBuffer;
++
++        switch (pRecord->RecordID) {
++            case HTC_RECORD_CREDITS:
++                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT));
++                HTCProcessCreditRpt(target,
++                                    (HTC_CREDIT_REPORT *)pRecordBuf,
++                                    pRecord->Length / (sizeof(HTC_CREDIT_REPORT)),
++                                    FromEndpoint);
++                break;
++            case HTC_RECORD_LOOKAHEAD:
++                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT));
++                pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf;
++                if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) &&
++                    (pNextLookAhead != NULL)) {
++
++                    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                                (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n",
++                                pLookAhead->PreValid,
++                                pLookAhead->PostValid));
++
++                        /* look ahead bytes are valid, copy them over */
++                    ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0];
++                    ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1];
++                    ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2];
++                    ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3];
++
++                    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++                        DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead");
++                    }
++                }
++                break;
++            default:
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n",
++                        pRecord->RecordID, pRecord->Length));
++                break;
++        }
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* advance buffer past this record for next time around */
++        pBuffer += pRecord->Length;
++        Length -= pRecord->Length;
++    }
++
++    if (A_FAILED(status)) {
++        DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer");
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n"));
++    return status;
++
++}
++
++/* process a received message (i.e. strip off header, process any trailer data)
++ * note : locks must be released when this function is called */
++static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead)
++{
++    A_UINT8   temp;
++    A_UINT8   *pBuf;
++    A_STATUS  status = A_OK;
++    A_UINT16  payloadLen;
++    A_UINT32  lookAhead;
++
++    pBuf = pPacket->pBuffer;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n"));
++
++    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++        AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT");
++    }
++
++    do {
++        /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to
++         * retrieve 16 bit fields */
++        payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen);
++
++        ((A_UINT8 *)&lookAhead)[0] = pBuf[0];
++        ((A_UINT8 *)&lookAhead)[1] = pBuf[1];
++        ((A_UINT8 *)&lookAhead)[2] = pBuf[2];
++        ((A_UINT8 *)&lookAhead)[3] = pBuf[3];
++
++        if (lookAhead != pPacket->HTCReserved) {
++            /* somehow the lookahead that gave us the full read length did not
++             * reflect the actual header in the pending message */
++             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCProcessRecvHeader, lookahead mismatch! \n"));
++             DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead");
++             DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header");
++#ifdef HTC_CAPTURE_LAST_FRAME
++            DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header");
++            if (target->LastTrailerLength != 0) {
++                DebugDumpBytes(target->LastTrailer,
++                               target->LastTrailerLength,
++                               "Last trailer");
++            }
++#endif
++            status = A_EPROTO;
++            break;
++        }
++
++            /* get flags */
++        temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags);
++
++        if (temp & HTC_FLAGS_RECV_TRAILER) {
++            /* this packet has a trailer */
++
++                /* extract the trailer length in control byte 0 */
++            temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]);
++
++            if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n",
++                        payloadLen, temp));
++                status = A_EPROTO;
++                break;
++            }
++
++                /* process trailer data that follows HDR + application payload */
++            status = HTCProcessTrailer(target,
++                                       (pBuf + HTC_HDR_LENGTH + payloadLen - temp),
++                                       temp,
++                                       pNextLookAhead,
++                                       pPacket->Endpoint);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++#ifdef HTC_CAPTURE_LAST_FRAME
++            A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp);
++            target->LastTrailerLength = temp;
++#endif
++                /* trim length by trailer bytes */
++            pPacket->ActualLength -= temp;
++        }
++#ifdef HTC_CAPTURE_LAST_FRAME
++         else {
++            target->LastTrailerLength = 0;
++        }
++#endif
++
++            /* if we get to this point, the packet is good */
++            /* remove header and adjust length */
++        pPacket->pBuffer += HTC_HDR_LENGTH;
++        pPacket->ActualLength -= HTC_HDR_LENGTH;
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++            /* dump the whole packet */
++        DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT");
++    } else {
++#ifdef HTC_CAPTURE_LAST_FRAME
++        A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR));
++#endif
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++            if (pPacket->ActualLength > 0) {
++                AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg");
++            }
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n"));
++    return status;
++}
++
++/* asynchronous completion handler for recv packet fetching, when the device layer
++ * completes a read request, it will call this completion handler */
++void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    HTC_ENDPOINT    *pEndpoint;
++    A_UINT32        nextLookAhead = 0;
++    A_STATUS        status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++
++    AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
++    pEndpoint = &target->EndPoint[pPacket->Endpoint];
++    pPacket->Completion = NULL;
++
++        /* get completion status */
++    status = pPacket->Status;
++
++    do {
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++            break;
++        }
++            /* process the header for any trailer data */
++        status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++            /* was there a lookahead for the next packet? */
++        if (nextLookAhead != 0) {
++            A_STATUS nextStatus;
++            AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                            ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n",
++                             nextLookAhead));
++                /* we have another packet, get the next packet fetch started (pipelined) before
++                 * we call into the endpoint's callback, this will start another async request */
++            nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL);
++            if (A_EPROTO == nextStatus) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                            ("Next look ahead from recv header was INVALID\n"));
++                DebugDumpBytes((A_UINT8 *)&nextLookAhead,
++                                4,
++                                "BAD lookahead from lookahead report");
++            }
++        } else {
++             AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++            ("HTCRecvCompleteHandler - rechecking for more messages...\n"));
++            /* if we did not get anything on the look-ahead,
++             * call device layer to asynchronously re-check for messages. If we can keep the async
++             * processing going we get better performance.  If there is a pending message we will keep processing
++             * messages asynchronously which should pipeline things nicely */
++            DevCheckPendingRecvMsgsAsync(&target->Device);
++        }
++
++        HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead);
++        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                         ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n",
++                         status));
++            /* recyle this packet */
++         HTC_RECYCLE_RX_PKT(target, pPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n"));
++}
++
++/* synchronously wait for a control message from the target,
++ * This function is used at initialization time ONLY.  At init messages
++ * on ENDPOINT 0 are expected. */
++A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket)
++{
++    A_STATUS        status;
++    A_UINT32        lookAhead;
++    HTC_PACKET      *pPacket = NULL;
++    HTC_FRAME_HDR   *pHdr;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n"));
++
++    do  {
++
++        *ppControlPacket = NULL;
++
++            /* call the polling function to see if we have a message */
++        status = DevPollMboxMsgRecv(&target->Device,
++                                    &lookAhead,
++                                    HTC_TARGET_RESPONSE_TIMEOUT);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead));
++
++            /* check the lookahead */
++        pHdr = (HTC_FRAME_HDR *)&lookAhead;
++
++        if (pHdr->EndpointID != ENDPOINT_0) {
++                /* unexpected endpoint number, should be zero */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        if (A_FAILED(status)) {
++                /* bad message */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        pPacket = HTC_ALLOC_CONTROL_RX(target);
++
++        if (pPacket == NULL) {
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_NO_MEMORY;
++            break;
++        }
++
++        pPacket->HTCReserved = lookAhead;
++        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
++
++        if (pPacket->ActualLength > pPacket->BufferLength) {
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++            /* we want synchronous operation */
++        pPacket->Completion = NULL;
++
++            /* get the message from the device, this will block */
++        status = HTCIssueRecv(target, pPacket);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* process receive header */
++        status = HTCProcessRecvHeader(target,pPacket,NULL);
++
++        pPacket->Status = status;
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n",
++                     status));
++            break;
++        }
++
++            /* give the caller this control message packet, they are responsible to free */
++        *ppControlPacket = pPacket;
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        if (pPacket != NULL) {
++                /* cleanup buffer on error */
++            HTC_FREE_CONTROL_RX(target,pPacket);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n"));
++
++    return status;
++}
++
++/* callback when device layer or lookahead report parsing detects a pending message */
++A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    A_STATUS         status = A_OK;
++    HTC_PACKET      *pPacket = NULL;
++    HTC_FRAME_HDR   *pHdr;
++    HTC_ENDPOINT    *pEndpoint;
++    A_BOOL          asyncProc = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead));
++
++    if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) {
++            /* We use async mode to get the packets if the device layer supports it.
++             * The device layer interfaces with HIF in which HIF may have restrictions on
++             * how interrupts are processed */
++        asyncProc = TRUE;
++    }
++
++    if (pAsyncProc != NULL) {
++            /* indicate to caller how we decided to process this */
++        *pAsyncProc = asyncProc;
++    }
++
++    while (TRUE) {
++
++        pHdr = (HTC_FRAME_HDR *)&LookAhead;
++
++        if (pHdr->EndpointID >= ENDPOINT_MAX) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID));
++                /* invalid endpoint */
++            status = A_EPROTO;
++            break;
++        }
++
++        if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n",
++                    pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH));
++            status = A_EPROTO;
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[pHdr->EndpointID];
++
++        if (0 == pEndpoint->ServiceID) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID));
++                /* endpoint isn't even connected */
++            status = A_EPROTO;
++            break;
++        }
++
++            /* lock RX to get a buffer */
++        LOCK_HTC_RX(target);
++
++            /* get a packet from the endpoint recv queue */
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++
++        if (NULL == pPacket) {
++                /* check for refill handler */
++            if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) {
++                UNLOCK_HTC_RX(target);
++                    /* call the re-fill handler */
++                pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext,
++                                                    pHdr->EndpointID);
++                LOCK_HTC_RX(target);
++                    /* check if we have more buffers */
++                pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++                    /* fall through */
++            }
++        }
++
++        if (NULL == pPacket) {
++                /* this is not an error, we simply need to mark that we are waiting for buffers.*/
++            target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS;
++            target->EpWaitingForBuffers = pHdr->EndpointID;
++            status = A_NO_MEMORY;
++        }
++
++        UNLOCK_HTC_RX(target);
++
++        if (A_FAILED(status)) {
++                /* no buffers */
++            break;
++        }
++
++        AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID);
++
++            /* make sure this message can fit in the endpoint buffer */
++        if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n",
++                    pHdr->PayloadLen, pPacket->BufferLength));
++            status = A_EPROTO;
++            break;
++        }
++
++        pPacket->HTCReserved = LookAhead; /* set expected look ahead */
++            /* set the amount of data to fetch */
++        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
++
++        if (asyncProc) {
++                /* we use async mode to get the packet if the device layer supports it
++                 * set our callback and context */
++            pPacket->Completion = HTCRecvCompleteHandler;
++            pPacket->pContext = target;
++        } else {
++                /* fully synchronous */
++            pPacket->Completion = NULL;
++        }
++
++            /* go fetch the packet */
++        status = HTCIssueRecv(target, pPacket);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (asyncProc) {
++                /* we did this asynchronously so we can get out of the loop, the asynch processing
++                 * creates a chain of requests to continue processing pending messages in the
++                 * context of callbacks  */
++            break;
++        }
++
++            /* in the sync case, we process the packet, check lookaheads and then repeat */
++
++        LookAhead = 0;
++        status = HTCProcessRecvHeader(target,pPacket,&LookAhead);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead);
++        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
++
++        pPacket = NULL;
++
++        if (0 == LookAhead) {
++            break;
++        }
++
++    }
++
++    if (A_NO_MEMORY == status) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n",
++                pHdr->EndpointID));
++            /* try to stop receive at the device layer */
++        DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC);
++        status = A_OK;
++    } else if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                        ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n",
++                        LookAhead, status));
++        if (pPacket != NULL) {
++                /* clean up packet on error */
++            HTC_RECYCLE_RX_PKT(target, pPacket);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n"));
++
++    return status;
++}
++
++/* Makes a buffer available to the HTC module */
++A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT *pEndpoint;
++    A_BOOL       unblockRecv = FALSE;
++    A_STATUS     status = A_OK;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n",
++                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength));
++
++    do {
++
++        if (HTC_STOPPING(target)) {
++            status = A_ECANCELED;
++            break;
++        }
++
++        AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
++
++        pEndpoint = &target->EndPoint[pPacket->Endpoint];
++
++        LOCK_HTC_RX(target);
++
++            /* store receive packet */
++        HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket);
++
++            /* check if we are blocked waiting for a new buffer */
++        if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) {
++            if (target->EpWaitingForBuffers == pPacket->Endpoint) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n",
++                    target->EpWaitingForBuffers));
++                target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS;
++                target->EpWaitingForBuffers = ENDPOINT_MAX;
++                unblockRecv = TRUE;
++            }
++        }
++
++        UNLOCK_HTC_RX(target);
++
++        if (unblockRecv && !HTC_STOPPING(target)) {
++                /* TODO : implement a buffer threshold count? */
++            DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC);
++        }
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint)
++{
++    HTC_PACKET  *pPacket;
++
++    LOCK_HTC_RX(target);
++
++    while (1) {
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++        if (NULL == pPacket) {
++            break;
++        }
++        UNLOCK_HTC_RX(target);
++        pPacket->Status = A_ECANCELED;
++        pPacket->ActualLength = 0;
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("  Flushing RX packet:0x%X, length:%d, ep:%d \n",
++                (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint));
++            /* give the packet back */
++        pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext,
++                                      pPacket);
++        LOCK_HTC_RX(target);
++    }
++
++    UNLOCK_HTC_RX(target);
++
++
++}
++
++void HTCFlushRecvBuffers(HTC_TARGET *target)
++{
++    HTC_ENDPOINT    *pEndpoint;
++    int             i;
++
++        /* NOTE: no need to flush endpoint 0, these buffers were
++         * allocated as part of the HTC struct */
++    for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) {
++        pEndpoint = &target->EndPoint[i];
++        if (pEndpoint->ServiceID == 0) {
++                /* not in use.. */
++            continue;
++        }
++        HTCFlushEndpointRX(target,pEndpoint);
++    }
++
++
++}
++
++
+diff --git a/drivers/ar6000/htc/htc_send.c b/drivers/ar6000/htc/htc_send.c
+new file mode 100644
+index 0000000..cf0dabe
+--- /dev/null
++++ b/drivers/ar6000/htc/htc_send.c
+@@ -0,0 +1,538 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++#define DO_EP_TX_COMPLETION(ep,p)                                    \
++{                                                                    \
++    (p)->Completion = NULL;                                          \
++    (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p));  \
++}
++
++
++/* call the distribute credits callback with the distribution */
++#define DO_DISTRIBUTION(t,reason,description,pList) \
++{                                             \
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,           \
++        ("  calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \
++                (description),                                           \
++                (A_UINT32)(t)->DistributeCredits,                        \
++                (A_UINT32)(t)->pCredDistContext,                         \
++                (A_UINT32)pList));                                       \
++    (t)->DistributeCredits((t)->pCredDistContext,                        \
++                           (pList),                                      \
++                           (reason));                                    \
++}
++
++/* our internal send packet completion handler when packets are submited to the AR6K device
++ * layer */
++static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[pPacket->Endpoint];
++
++
++    if (A_FAILED(pPacket->Status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++            ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++    }
++        /* first, fixup the head room we allocated */
++    pPacket->pBuffer += HTC_HDR_LENGTH;
++        /* do completion */
++    DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++}
++
++A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags)
++{
++    A_STATUS status;
++    A_UINT8 *pHdrBuf;
++    A_BOOL   sync = FALSE;
++
++        /* caller always provides headrooom */
++    pPacket->pBuffer -= HTC_HDR_LENGTH;
++    pHdrBuf = pPacket->pBuffer;
++        /* setup frame header */
++    A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength);
++    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags);
++    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint);
++
++    if (pPacket->Completion == NULL) {
++            /* mark that this request was synchronously issued */
++        sync = TRUE;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+-HTCIssueSend: transmit length : %d (%s) \n",
++                    pPacket->ActualLength + HTC_HDR_LENGTH,
++                    sync ? "SYNC" : "ASYNC" ));
++
++        /* send message to device */
++    status = DevSendPacket(&target->Device,
++                           pPacket,
++                           pPacket->ActualLength + HTC_HDR_LENGTH);
++
++    if (sync) {
++            /* use local sync variable.  If this was issued asynchronously, pPacket is no longer
++             * safe to access. */
++        pPacket->pBuffer += HTC_HDR_LENGTH;
++    }
++
++    /* if this request was asynchronous, the packet completion routine will be invoked by
++     * the device layer when the HIF layer completes the request */
++
++    return status;
++}
++
++/* try to send the current packet or a packet at the head of the TX queue,
++ * if there are no credits, the packet remains in the queue. */
++static void HTCTrySend(HTC_TARGET      *target,
++                       HTC_PACKET      *pPacketToSend,
++                       HTC_ENDPOINT_ID ep)
++{
++    HTC_PACKET   *pPacket;
++    HTC_ENDPOINT *pEndpoint;
++    int          creditsRequired;
++    A_UINT8      sendFlags;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend));
++
++    pEndpoint = &target->EndPoint[ep];
++
++    LOCK_HTC_TX(target);
++
++    if (pPacketToSend != NULL) {
++        /* caller supplied us a packet to queue to the tail of the HTC TX queue before
++         * we check the tx queue */
++        HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend);
++        pEndpoint->CurrentTxQueueDepth++;
++    }
++
++        /* now drain the TX queue for transmission as long as we have enough
++         * credits */
++
++    while (1) {
++
++        if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) {
++                /* nothing in the queue */
++            break;
++        }
++
++        sendFlags = 0;
++
++            /* get packet at head, but don't remove it */
++        pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue);
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n",
++                (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth));
++
++            /* figure out how many credits this message requires */
++        creditsRequired  = pPacket->ActualLength + HTC_HDR_LENGTH;
++        creditsRequired += target->TargetCreditSize - 1;
++        creditsRequired /= target->TargetCreditSize;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d   Got:%d\n",
++                            creditsRequired, pEndpoint->CreditDist.TxCredits));
++
++        if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
++
++            /* not enough credits */
++
++            if (pPacket->Endpoint == ENDPOINT_0) {
++                    /* leave it in the queue */
++                break;
++            }
++                /* invoke the registered distribution function only if this is not
++                 * endpoint 0, we let the driver layer provide more credits if it can.
++                 * We pass the credit distribution list starting at the endpoint in question
++                 * */
++
++                /* set how many credits we need  */
++            pEndpoint->CreditDist.TxCreditsSeek =
++                                    creditsRequired - pEndpoint->CreditDist.TxCredits;
++            DO_DISTRIBUTION(target,
++                            HTC_CREDIT_DIST_SEEK_CREDITS,
++                            "Seek Credits",
++                            &pEndpoint->CreditDist);
++
++            pEndpoint->CreditDist.TxCreditsSeek = 0;
++
++            if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
++                    /* still not enough credits to send, leave packet in the queue */
++                AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    (" Not enough credits for ep %d leaving packet in queue..\n",
++                    pPacket->Endpoint));
++                break;
++            }
++
++        }
++
++        pEndpoint->CreditDist.TxCredits -= creditsRequired;
++        INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired);
++
++            /* check if we need credits */
++        if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
++            sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
++            INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1);
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits  \n"));
++        }
++
++            /* now we can fully dequeue */
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue);
++        pEndpoint->CurrentTxQueueDepth--;
++
++        INC_HTC_EP_STAT(pEndpoint, TxIssued, 1);
++
++        UNLOCK_HTC_TX(target);
++
++        HTCIssueSend(target, pPacket, sendFlags);
++
++        LOCK_HTC_TX(target);
++
++        /* go back and check for more messages */
++    }
++
++    if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n",
++                        ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth));
++        UNLOCK_HTC_TX(target);
++            /* queue is now full, let caller know */
++        if (pEndpoint->EpCallBacks.EpSendFull != NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n"));
++            pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep);
++        }
++    } else {
++        UNLOCK_HTC_TX(target);
++            /* queue is now available for new packet, let caller know */
++        if (pEndpoint->EpCallBacks.EpSendAvail)
++            pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend:  \n"));
++}
++
++/* HTC API - HTCSendPkt */
++A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint;
++    HTC_ENDPOINT_ID ep;
++    A_STATUS        status = A_OK;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n",
++                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength));
++
++    ep = pPacket->Endpoint;
++    AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
++    pEndpoint = &target->EndPoint[ep];
++
++    do {
++
++        if (HTC_STOPPING(target)) {
++            status = A_ECANCELED;
++            pPacket->Status = status;
++            DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++            break;
++        }
++            /* everything sent through this interface is asynchronous */
++            /* fill in HTC completion routines */
++        pPacket->Completion = HTCSendPktCompletionHandler;
++        pPacket->pContext = target;
++
++        HTCTrySend(target, pPacket, ep);
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n"));
++
++    return status;
++}
++
++
++/* check TX queues to drain because of credit distribution update */
++static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target)
++{
++    HTC_ENDPOINT                *pEndpoint;
++    HTC_ENDPOINT_CREDIT_DIST    *pDistItem;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n"));
++    pDistItem = target->EpCreditDistributionListHead;
++
++        /* run through the credit distribution list to see
++         * if there are packets queued
++         * NOTE: no locks need to be taken since the distribution list
++         * is not dynamic (cannot be re-ordered) and we are not modifying any state */
++    while (pDistItem != NULL) {
++        pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved;
++
++        if (pEndpoint->CurrentTxQueueDepth > 0) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n",
++                    pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth));
++                /* try to start the stalled queue, this list is ordered by priority.
++                 * Highest priority queue get's processed first, if there are credits available the
++                 * highest priority queue will get a chance to reclaim credits from lower priority
++                 * ones */
++            HTCTrySend(target, NULL, pDistItem->Endpoint);
++        }
++
++        pDistItem = pDistItem->pNext;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n"));
++}
++
++/* process credit reports and call distribution function */
++void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint)
++{
++    int             i;
++    HTC_ENDPOINT    *pEndpoint;
++    int             totalCredits = 0;
++    A_BOOL          doDist = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries));
++
++        /* lock out TX while we update credits */
++    LOCK_HTC_TX(target);
++
++    for (i = 0; i < NumEntries; i++, pRpt++) {
++        if (pRpt->EndpointID >= ENDPOINT_MAX) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[pRpt->EndpointID];
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Endpoint %d got %d credits \n",
++                pRpt->EndpointID, pRpt->Credits));
++
++
++#ifdef HTC_EP_STAT_PROFILING
++
++        INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1);
++        INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits);
++
++        if (FromEndpoint == pRpt->EndpointID) {
++                /* this credit report arrived on the same endpoint indicating it arrived in an RX
++                 * packet */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1);
++        } else if (FromEndpoint == ENDPOINT_0) {
++                /* this credit arrived on endpoint 0 as a NULL message */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1);
++        } else {
++                /* arrived on another endpoint */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1);
++        }
++
++#endif
++
++        if (ENDPOINT_0 == pRpt->EndpointID) {
++                /* always give endpoint 0 credits back */
++            pEndpoint->CreditDist.TxCredits += pRpt->Credits;
++        } else {
++                /* for all other endpoints, update credits to distribute, the distribution function
++                 * will handle giving out credits back to the endpoints */
++            pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits;
++                /* flag that we have to do the distribution */
++            doDist = TRUE;
++        }
++
++        totalCredits += pRpt->Credits;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Report indicated %d credits to distribute \n", totalCredits));
++
++    if (doDist) {
++            /* this was a credit return based on a completed send operations
++             * note, this is done with the lock held */
++        DO_DISTRIBUTION(target,
++                        HTC_CREDIT_DIST_SEND_COMPLETE,
++                        "Send Complete",
++                        target->EpCreditDistributionListHead->pNext);
++    }
++
++    UNLOCK_HTC_TX(target);
++
++    if (totalCredits) {
++        HTCCheckEndpointTxQueues(target);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n"));
++}
++
++/* flush endpoint TX queue */
++static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag)
++{
++    HTC_PACKET          *pPacket;
++    HTC_PACKET_QUEUE    discardQueue;
++
++        /* initialize the discard queue */
++    INIT_HTC_PACKET_QUEUE(&discardQueue);
++
++    LOCK_HTC_TX(target);
++
++        /* interate from the front of the TX queue and flush out packets */
++    ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) {
++
++            /* check for removal */
++        if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) {
++                /* remove from queue */
++            HTC_PACKET_REMOVE(pPacket);
++                /* add it to the discard pile */
++            HTC_PACKET_ENQUEUE(&discardQueue, pPacket);
++            pEndpoint->CurrentTxQueueDepth--;
++        }
++
++    } ITERATE_END;
++
++    UNLOCK_HTC_TX(target);
++
++        /* empty the discard queue */
++    while (1) {
++        pPacket = HTC_PACKET_DEQUEUE(&discardQueue);
++        if (NULL == pPacket) {
++            break;
++        }
++        pPacket->Status = A_ECANCELED;
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("  Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n",
++                (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag));
++        DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++    }
++
++}
++
++void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist)
++{
++#ifdef DEBUG
++    HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved;
++#endif
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d  ServiceID: 0x%X    --------------\n",
++                        pEPDist->Endpoint, pEPDist->ServiceID));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n",
++                (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags          : 0x%X \n", pEPDist->DistFlags));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm      : %d \n", pEPDist->TxCreditsNorm));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin       : %d \n", pEPDist->TxCreditsMin));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits          : %d \n", pEPDist->TxCredits));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned  : %d \n", pEPDist->TxCreditsAssigned));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek      : %d \n", pEPDist->TxCreditsSeek));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize       : %d \n", pEPDist->TxCreditSize));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist    : %d \n", pEPDist->TxCreditsToDist));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth       : %d \n", pEndpoint->CurrentTxQueueDepth));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n"));
++}
++
++void DumpCreditDistStates(HTC_TARGET *target)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead;
++
++    while (pEPList != NULL) {
++        DumpCreditDist(pEPList);
++        pEPList = pEPList->pNext;
++    }
++
++    if (target->DistributeCredits != NULL) {
++        DO_DISTRIBUTION(target,
++                        HTC_DUMP_CREDIT_STATE,
++                        "Dump State",
++                        NULL);
++    }
++}
++
++/* flush all send packets from all endpoint queues */
++void HTCFlushSendPkts(HTC_TARGET *target)
++{
++    HTC_ENDPOINT    *pEndpoint;
++    int             i;
++
++    DumpCreditDistStates(target);
++
++    for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
++        pEndpoint = &target->EndPoint[i];
++        if (pEndpoint->ServiceID == 0) {
++                /* not in use.. */
++            continue;
++        }
++        HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL);
++    }
++
++}
++
++/* HTC API to flush an endpoint's TX queue*/
++void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
++
++    if (pEndpoint->ServiceID == 0) {
++        AR_DEBUG_ASSERT(FALSE);
++        /* not in use.. */
++        return;
++    }
++
++    HTCFlushEndpointTX(target, pEndpoint, Tag);
++}
++
++/* HTC API to indicate activity to the credit distribution function */
++void HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
++                               HTC_ENDPOINT_ID Endpoint,
++                               A_BOOL          Active)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
++    A_BOOL          doDist = FALSE;
++
++    if (pEndpoint->ServiceID == 0) {
++        AR_DEBUG_ASSERT(FALSE);
++        /* not in use.. */
++        return;
++    }
++
++    LOCK_HTC_TX(target);
++
++    if (Active) {
++        if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) {
++                /* mark active now */
++            pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE;
++            doDist = TRUE;
++        }
++    } else {
++        if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) {
++                /* mark inactive now */
++            pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE;
++            doDist = TRUE;
++        }
++    }
++
++    if (doDist) {
++        /* do distribution again based on activity change
++         * note, this is done with the lock held */
++        DO_DISTRIBUTION(target,
++                        HTC_CREDIT_DIST_ACTIVITY_CHANGE,
++                        "Activity Change",
++                        target->EpCreditDistributionListHead->pNext);
++    }
++
++    UNLOCK_HTC_TX(target);
++
++}
+diff --git a/drivers/ar6000/htc/htc_services.c b/drivers/ar6000/htc/htc_services.c
+new file mode 100644
+index 0000000..e5d50d1
+--- /dev/null
++++ b/drivers/ar6000/htc/htc_services.c
+@@ -0,0 +1,403 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket)
++{
++        /* not implemented
++         * we do not send control TX frames during normal runtime, only during setup  */
++    AR_DEBUG_ASSERT(FALSE);
++}
++
++    /* callback when a control message arrives on this endpoint */
++void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
++{
++    AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);
++
++        /* the only control messages we are expecting are NULL messages (credit resports), which should
++         * never get here */
++    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCControlRecv, got message with length:%d \n",
++                    pPacket->ActualLength + HTC_HDR_LENGTH));
++
++        /* dump header and message */
++    DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
++                   pPacket->ActualLength + HTC_HDR_LENGTH,
++                   "Unexpected ENDPOINT 0 Message");
++
++    HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket);
++}
++
++A_STATUS HTCSendSetupComplete(HTC_TARGET *target)
++{
++    HTC_PACKET             *pSendPacket = NULL;
++    A_STATUS                status;
++    HTC_SETUP_COMPLETE_MSG *pSetupComplete;
++
++    do {
++           /* allocate a packet to send to the target */
++        pSendPacket = HTC_ALLOC_CONTROL_TX(target);
++
++        if (NULL == pSendPacket) {
++            status = A_NO_MEMORY;
++            break;
++        }
++
++            /* assemble setup complete message */
++        pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer;
++        A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG));
++        pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID;
++
++        SET_HTC_PACKET_INFO_TX(pSendPacket,
++                               NULL,
++                               (A_UINT8 *)pSetupComplete,
++                               sizeof(HTC_SETUP_COMPLETE_MSG),
++                               ENDPOINT_0,
++                               HTC_SERVICE_TX_PACKET_TAG);
++
++            /* we want synchronous operation */
++        pSendPacket->Completion = NULL;
++            /* send the message */
++        status = HTCIssueSend(target,pSendPacket,0);
++
++    } while (FALSE);
++
++    if (pSendPacket != NULL) {
++        HTC_FREE_CONTROL_TX(target,pSendPacket);
++    }
++
++    return status;
++}
++
++
++A_STATUS HTCConnectService(HTC_HANDLE               HTCHandle,
++                           HTC_SERVICE_CONNECT_REQ  *pConnectReq,
++                           HTC_SERVICE_CONNECT_RESP *pConnectResp)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_STATUS                            status = A_OK;
++    HTC_PACKET                          *pRecvPacket = NULL;
++    HTC_PACKET                          *pSendPacket = NULL;
++    HTC_CONNECT_SERVICE_RESPONSE_MSG    *pResponseMsg;
++    HTC_CONNECT_SERVICE_MSG             *pConnectMsg;
++    HTC_ENDPOINT_ID                     assignedEndpoint = ENDPOINT_MAX;
++    HTC_ENDPOINT                        *pEndpoint;
++    int                                 maxMsgSize = 0;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n",
++               (A_UINT32)target, pConnectReq->ServiceID));
++
++    do {
++
++        AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0);
++
++        if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) {
++                /* special case for pseudo control service */
++            assignedEndpoint = ENDPOINT_0;
++            maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH;
++        } else {
++                /* allocate a packet to send to the target */
++            pSendPacket = HTC_ALLOC_CONTROL_TX(target);
++
++            if (NULL == pSendPacket) {
++                AR_DEBUG_ASSERT(FALSE);
++                status = A_NO_MEMORY;
++                break;
++            }
++                /* assemble connect service message */
++            pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer;
++            AR_DEBUG_ASSERT(pConnectMsg != NULL);
++            A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG));
++            pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID;
++            pConnectMsg->ServiceID = pConnectReq->ServiceID;
++            pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags;
++                /* check caller if it wants to transfer meta data */
++            if ((pConnectReq->pMetaData != NULL) &&
++                (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
++                    /* copy meta data into message buffer (after header ) */
++                A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG),
++                         pConnectReq->pMetaData,
++                         pConnectReq->MetaDataLength);
++                pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength;
++            }
++
++            SET_HTC_PACKET_INFO_TX(pSendPacket,
++                                   NULL,
++                                   (A_UINT8 *)pConnectMsg,
++                                   sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength,
++                                   ENDPOINT_0,
++                                   HTC_SERVICE_TX_PACKET_TAG);
++
++                /* we want synchronous operation */
++            pSendPacket->Completion = NULL;
++
++            status = HTCIssueSend(target,pSendPacket,0);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++                /* wait for response */
++            status = HTCWaitforControlMessage(target, &pRecvPacket);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++                /* we controlled the buffer creation so it has to be properly aligned */
++            pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer;
++
++            if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) ||
++                (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) {
++                    /* this message is not valid */
++                AR_DEBUG_ASSERT(FALSE);
++                status = A_EPROTO;
++                break;
++            }
++
++            pConnectResp->ConnectRespCode = pResponseMsg->Status;
++                /* check response status */
++            if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    (" Target failed service 0x%X connect request (status:%d)\n",
++                                pResponseMsg->ServiceID, pResponseMsg->Status));
++                status = A_EPROTO;
++                break;
++            }
++
++            assignedEndpoint = pResponseMsg->EndpointID;
++            maxMsgSize = pResponseMsg->MaxMsgSize;
++
++            if ((pConnectResp->pMetaData != NULL) &&
++                (pResponseMsg->ServiceMetaLength > 0) &&
++                (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
++                    /* caller supplied a buffer and the target responded with data */
++                int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength);
++                    /* copy the meta data */
++                A_MEMCPY(pConnectResp->pMetaData,
++                         ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG),
++                         copyLength);
++                pConnectResp->ActualLength = copyLength;
++            }
++
++        }
++
++            /* the rest of these are parameter checks so set the error status */
++        status = A_EPROTO;
++
++        if (assignedEndpoint >= ENDPOINT_MAX) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        if (0 == maxMsgSize) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[assignedEndpoint];
++
++        if (pEndpoint->ServiceID != 0) {
++            /* endpoint already in use! */
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* return assigned endpoint to caller */
++        pConnectResp->Endpoint = assignedEndpoint;
++        pConnectResp->MaxMsgLength = maxMsgSize;
++
++            /* setup the endpoint */
++        pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */
++        pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth;
++        pEndpoint->MaxMsgLength = maxMsgSize;
++            /* copy all the callbacks */
++        pEndpoint->EpCallBacks = pConnectReq->EpCallbacks;
++        INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers);
++        INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue);
++            /* set the credit distribution info for this endpoint, this information is
++             * passed back to the credit distribution callback function */
++        pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID;
++        pEndpoint->CreditDist.pHTCReserved = pEndpoint;
++        pEndpoint->CreditDist.Endpoint = assignedEndpoint;
++        pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize;
++        pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize;
++
++        if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
++            pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1;
++        }
++
++        status = A_OK;
++
++    } while (FALSE);
++
++    if (pSendPacket != NULL) {
++        HTC_FREE_CONTROL_TX(target,pSendPacket);
++    }
++
++    if (pRecvPacket != NULL) {
++        HTC_FREE_CONTROL_RX(target,pRecvPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n"));
++
++    return status;
++}
++
++static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry;
++
++    if (NULL == target->EpCreditDistributionListHead) {
++        target->EpCreditDistributionListHead = pEpDist;
++        pEpDist->pNext = NULL;
++        pEpDist->pPrev = NULL;
++        return;
++    }
++
++        /* queue to the end of the list, this does not have to be very
++         * fast since this list is built at startup time */
++    pCurEntry = target->EpCreditDistributionListHead;
++
++    while (pCurEntry) {
++        pLastEntry = pCurEntry;
++        pCurEntry = pCurEntry->pNext;
++    }
++
++    pLastEntry->pNext = pEpDist;
++    pEpDist->pPrev = pLastEntry;
++    pEpDist->pNext = NULL;
++}
++
++
++
++/* default credit init callback */
++static void HTCDefaultCreditInit(void                     *Context,
++                                 HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                 int                      TotalCredits)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      totalEps = 0;
++    int                      creditsPerEndpoint;
++
++    pCurEpDist = pEPList;
++        /* first run through the list and figure out how many endpoints we are dealing with */
++    while (pCurEpDist != NULL) {
++        pCurEpDist = pCurEpDist->pNext;
++        totalEps++;
++    }
++
++        /* even distribution */
++    creditsPerEndpoint = TotalCredits/totalEps;
++
++    pCurEpDist = pEPList;
++        /* run through the list and set minimum and normal credits and
++         * provide the endpoint with some credits to start */
++    while (pCurEpDist != NULL) {
++
++        if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) {
++                /* too many endpoints and not enough credits */
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++            /* our minimum is set for at least 1 max message */
++        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
++            /* this value is ignored by our credit alg, since we do
++             * not dynamically adjust credits, this is the policy of
++             * the "default" credit distribution, something simple and easy */
++        pCurEpDist->TxCreditsNorm = 0xFFFF;
++            /* give the endpoint minimum credits */
++        pCurEpDist->TxCredits = creditsPerEndpoint;
++        pCurEpDist->TxCreditsAssigned = creditsPerEndpoint;
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++}
++
++/* default credit distribution callback, NOTE, this callback holds the TX lock */
++void HTCDefaultCreditDist(void                     *Context,
++                          HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
++                          HTC_CREDIT_DIST_REASON   Reason)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++
++    if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) {
++        pCurEpDist = pEPDistList;
++            /* simple distribution */
++        while (pCurEpDist != NULL) {
++            if (pCurEpDist->TxCreditsToDist > 0) {
++                    /* just give the endpoint back the credits */
++                pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
++                pCurEpDist->TxCreditsToDist = 0;
++            }
++            pCurEpDist = pCurEpDist->pNext;
++        }
++    }
++
++    /* note we do not need to handle the other reason codes as this is a very
++     * simple distribution scheme, no need to seek for more credits or handle inactivity */
++}
++
++void HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
++                              void                     *pCreditDistContext,
++                              HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
++                              HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
++                              HTC_SERVICE_ID           ServicePriorityOrder[],
++                              int                      ListLength)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    int i;
++    int ep;
++
++    if (CreditInitFunc != NULL) {
++            /* caller has supplied their own distribution functions */
++        target->InitCredits = CreditInitFunc;
++        AR_DEBUG_ASSERT(CreditDistFunc != NULL);
++        target->DistributeCredits = CreditDistFunc;
++        target->pCredDistContext = pCreditDistContext;
++    } else {
++        /* caller wants HTC to do distribution */
++        /* if caller wants service to handle distributions then
++         * it must set both of these to NULL! */
++        AR_DEBUG_ASSERT(CreditDistFunc == NULL);
++        target->InitCredits = HTCDefaultCreditInit;
++        target->DistributeCredits = HTCDefaultCreditDist;
++        target->pCredDistContext = target;
++    }
++
++        /* always add HTC control endpoint first, we only expose the list after the
++         * first one, this is added for TX queue checking */
++    AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist);
++
++        /* build the list of credit distribution structures in priority order
++         * supplied by the caller, these will follow endpoint 0 */
++    for (i = 0; i < ListLength; i++) {
++            /* match services with endpoints and add the endpoints to the distribution list
++             * in FIFO order */
++        for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
++            if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) {
++                    /* queue this one to the list */
++                AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist);
++                break;
++            }
++        }
++        AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
++    }
++
++}
+diff --git a/drivers/ar6000/include/AR6001_regdump.h b/drivers/ar6000/include/AR6001_regdump.h
+new file mode 100644
+index 0000000..c1bcade
+--- /dev/null
++++ b/drivers/ar6000/include/AR6001_regdump.h
+@@ -0,0 +1,100 @@
++/*
++ * Copyright (c) 2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __AR6000_REGDUMP_H__
++#define __AR6000_REGDUMP_H__
++
++#if !defined(__ASSEMBLER__)
++/*
++ * Target CPU state at the time of failure is reflected
++ * in a register dump, which the Host can fetch through
++ * the diagnostic window.
++ */
++
++struct MIPS_exception_frame_s {
++    A_UINT32 pc;        /* Program Counter */
++    A_UINT32 at;        /* MIPS General Purpose registers */
++    A_UINT32 v0;
++    A_UINT32 v1;
++    A_UINT32 a0;
++    A_UINT32 a1;
++    A_UINT32 a2;
++    A_UINT32 a3;
++    A_UINT32 t0;
++    A_UINT32 t1;
++    A_UINT32 t2;
++    A_UINT32 t3;
++    A_UINT32 t4;
++    A_UINT32 t5;
++    A_UINT32 t6;
++    A_UINT32 t7;
++    A_UINT32 s0;
++    A_UINT32 s1;
++    A_UINT32 s2;
++    A_UINT32 s3;
++    A_UINT32 s4;
++    A_UINT32 s5;
++    A_UINT32 s6;
++    A_UINT32 s7;
++    A_UINT32 t8;
++    A_UINT32 t9;
++    A_UINT32 k0;
++    A_UINT32 k1;
++    A_UINT32 gp;
++    A_UINT32 sp;
++    A_UINT32 s8;
++    A_UINT32 ra;
++    A_UINT32 cause; /* Selected coprocessor regs */
++    A_UINT32 status;
++};
++typedef struct MIPS_exception_frame_s CPU_exception_frame_t;
++
++#endif
++
++/*
++ * Offsets into MIPS_exception_frame structure, for use in assembler code
++ * MUST MATCH C STRUCTURE ABOVE
++ */
++#define RD_pc           0
++#define RD_at           1
++#define RD_v0           2
++#define RD_v1           3
++#define RD_a0           4
++#define RD_a1           5
++#define RD_a2           6
++#define RD_a3           7
++#define RD_t0           8
++#define RD_t1           9
++#define RD_t2           10
++#define RD_t3           11
++#define RD_t4           12
++#define RD_t5           13
++#define RD_t6           14
++#define RD_t7           15
++#define RD_s0           16
++#define RD_s1           17
++#define RD_s2           18
++#define RD_s3           19
++#define RD_s4           20
++#define RD_s5           21
++#define RD_s6           22
++#define RD_s7           23
++#define RD_t8           24
++#define RD_t9           25
++#define RD_k0           26
++#define RD_k1           27
++#define RD_gp           28
++#define RD_sp           29
++#define RD_s8           30
++#define RD_ra           31
++#define RD_cause        32
++#define RD_status       33
++
++#define RD_SIZE         (34*4) /* Space for this number of words */
++
++#endif /* __AR6000_REGDUMP_H__ */
+diff --git a/drivers/ar6000/include/AR6K_version.h b/drivers/ar6000/include/AR6K_version.h
+new file mode 100644
+index 0000000..d5b2a20
+--- /dev/null
++++ b/drivers/ar6000/include/AR6K_version.h
+@@ -0,0 +1,36 @@
++#define __VER_MAJOR_ 2
++#define __VER_MINOR_ 0
++#define __VER_PATCH_ 0
++
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * The makear6ksdk script (used for release builds) modifies the following line.
++ */
++#define __BUILD_NUMBER_ 18
++
++
++/* Format of the version number. */
++#define VER_MAJOR_BIT_OFFSET		28
++#define VER_MINOR_BIT_OFFSET		24
++#define VER_PATCH_BIT_OFFSET		16
++#define VER_BUILD_NUM_BIT_OFFSET	0
++
++
++/*
++ * The version has the following format:
++ * Bits 28-31: Major version
++ * Bits 24-27: Minor version
++ * Bits 16-23: Patch version
++ * Bits 0-15:  Build number (automatically generated during build process )
++ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
++ *
++ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
++ */
++#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
++
++
+diff --git a/drivers/ar6000/include/AR6K_version.h.NEW b/drivers/ar6000/include/AR6K_version.h.NEW
+new file mode 100644
+index 0000000..d5b2a20
+--- /dev/null
++++ b/drivers/ar6000/include/AR6K_version.h.NEW
+@@ -0,0 +1,36 @@
++#define __VER_MAJOR_ 2
++#define __VER_MINOR_ 0
++#define __VER_PATCH_ 0
++
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * The makear6ksdk script (used for release builds) modifies the following line.
++ */
++#define __BUILD_NUMBER_ 18
++
++
++/* Format of the version number. */
++#define VER_MAJOR_BIT_OFFSET		28
++#define VER_MINOR_BIT_OFFSET		24
++#define VER_PATCH_BIT_OFFSET		16
++#define VER_BUILD_NUM_BIT_OFFSET	0
++
++
++/*
++ * The version has the following format:
++ * Bits 28-31: Major version
++ * Bits 24-27: Minor version
++ * Bits 16-23: Patch version
++ * Bits 0-15:  Build number (automatically generated during build process )
++ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
++ *
++ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
++ */
++#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
++
++
+diff --git a/drivers/ar6000/include/AR6Khwreg.h b/drivers/ar6000/include/AR6Khwreg.h
+new file mode 100644
+index 0000000..ecfdf20
+--- /dev/null
++++ b/drivers/ar6000/include/AR6Khwreg.h
+@@ -0,0 +1,147 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions for AR6001 registers
++ * that may be directly manipulated by Host software.
++ */
++
++#ifndef __AR6KHWREG_H__
++#define __AR6KHWREG_H__
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* Host registers */
++#define HOST_INT_STATUS_ADDRESS                  0x00000400
++#define CPU_INT_STATUS_ADDRESS                   0x00000401
++#define ERROR_INT_STATUS_ADDRESS                 0x00000402
++#define INT_STATUS_ENABLE_ADDRESS                0x00000418
++#define CPU_INT_STATUS_ENABLE_ADDRESS            0x00000419
++#define COUNT_ADDRESS                            0x00000420
++#define COUNT_DEC_ADDRESS                        0x00000440
++#define WINDOW_DATA_ADDRESS                      0x00000474
++#define WINDOW_WRITE_ADDR_ADDRESS                0x00000478
++#define WINDOW_READ_ADDR_ADDRESS                 0x0000047c
++
++/* Target addresses */
++#define RESET_CONTROL_ADDRESS                    0x0c000000
++#define MC_REMAP_VALID_ADDRESS                   0x0c004080
++#define MC_REMAP_SIZE_ADDRESS                    0x0c004100
++#define MC_REMAP_COMPARE_ADDRESS                 0x0c004180
++#define MC_REMAP_TARGET_ADDRESS                  0x0c004200
++#define LOCAL_COUNT_ADDRESS                      0x0c014080
++#define LOCAL_SCRATCH_ADDRESS                    0x0c0140c0
++
++
++#define INT_STATUS_ENABLE_ERROR_MSB              7
++#define INT_STATUS_ENABLE_ERROR_LSB              7
++#define INT_STATUS_ENABLE_ERROR_MASK             0x00000080
++#define INT_STATUS_ENABLE_ERROR_GET(x)           (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB)
++#define INT_STATUS_ENABLE_ERROR_SET(x)           (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK)
++
++#define INT_STATUS_ENABLE_CPU_MSB                6
++#define INT_STATUS_ENABLE_CPU_LSB                6
++#define INT_STATUS_ENABLE_CPU_MASK               0x00000040
++#define INT_STATUS_ENABLE_CPU_GET(x)             (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB)
++#define INT_STATUS_ENABLE_CPU_SET(x)             (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK)
++
++#define INT_STATUS_ENABLE_COUNTER_MSB            4
++#define INT_STATUS_ENABLE_COUNTER_LSB            4
++#define INT_STATUS_ENABLE_COUNTER_MASK           0x00000010
++#define INT_STATUS_ENABLE_COUNTER_GET(x)         (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB)
++#define INT_STATUS_ENABLE_COUNTER_SET(x)         (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK)
++
++#define INT_STATUS_ENABLE_MBOX_DATA_MSB          3
++#define INT_STATUS_ENABLE_MBOX_DATA_LSB          0
++#define INT_STATUS_ENABLE_MBOX_DATA_MASK         0x0000000f
++#define INT_STATUS_ENABLE_MBOX_DATA_GET(x)       (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB)
++#define INT_STATUS_ENABLE_MBOX_DATA_SET(x)       (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK)
++
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB     1
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB     1
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK    0x00000002
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x)  (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB)
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x)  (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK)
++
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB      0
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB      0
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK     0x00000001
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x)   (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB)
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x)   (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK)
++
++
++#define CPU_INT_STATUS_ENABLE_BIT_MSB            7
++#define CPU_INT_STATUS_ENABLE_BIT_LSB            0
++#define CPU_INT_STATUS_ENABLE_BIT_MASK           0x000000ff
++#define CPU_INT_STATUS_ENABLE_BIT_GET(x)         (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB)
++#define CPU_INT_STATUS_ENABLE_BIT_SET(x)         (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK)
++
++#define COUNTER_INT_STATUS_ENABLE_BIT_MSB        7
++#define COUNTER_INT_STATUS_ENABLE_BIT_LSB        0
++#define COUNTER_INT_STATUS_ENABLE_BIT_MASK       0x000000ff
++#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x)     (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB)
++#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x)     (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK)
++
++#define ERROR_INT_STATUS_WAKEUP_MSB              2
++#define ERROR_INT_STATUS_WAKEUP_LSB              2
++#define ERROR_INT_STATUS_WAKEUP_MASK             0x00000004
++#define ERROR_INT_STATUS_WAKEUP_GET(x)           (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB)
++#define ERROR_INT_STATUS_WAKEUP_SET(x)           (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK)
++
++#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB        1
++#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB        1
++#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK       0x00000002
++#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x)     (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB)
++#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x)     (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK)
++
++#define ERROR_INT_STATUS_TX_OVERFLOW_MSB         0
++#define ERROR_INT_STATUS_TX_OVERFLOW_LSB         0
++#define ERROR_INT_STATUS_TX_OVERFLOW_MASK        0x00000001
++#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x)      (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB)
++#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x)      (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK)
++
++#define HOST_INT_STATUS_ERROR_MSB                7
++#define HOST_INT_STATUS_ERROR_LSB                7
++#define HOST_INT_STATUS_ERROR_MASK               0x00000080
++#define HOST_INT_STATUS_ERROR_GET(x)             (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB)
++#define HOST_INT_STATUS_ERROR_SET(x)             (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK)
++
++#define HOST_INT_STATUS_CPU_MSB                  6
++#define HOST_INT_STATUS_CPU_LSB                  6
++#define HOST_INT_STATUS_CPU_MASK                 0x00000040
++#define HOST_INT_STATUS_CPU_GET(x)               (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB)
++#define HOST_INT_STATUS_CPU_SET(x)               (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK)
++
++#define HOST_INT_STATUS_COUNTER_MSB              4
++#define HOST_INT_STATUS_COUNTER_LSB              4
++#define HOST_INT_STATUS_COUNTER_MASK             0x00000010
++#define HOST_INT_STATUS_COUNTER_GET(x)           (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB)
++#define HOST_INT_STATUS_COUNTER_SET(x)           (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK)
++
++#define RESET_CONTROL_WARM_RST_MSB               7
++#define RESET_CONTROL_WARM_RST_LSB               7
++#define RESET_CONTROL_WARM_RST_MASK              0x00000080
++#define RESET_CONTROL_WARM_RST_GET(x)            (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB)
++#define RESET_CONTROL_WARM_RST_SET(x)            (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK)
++
++#define RESET_CONTROL_COLD_RST_MSB               8
++#define RESET_CONTROL_COLD_RST_LSB               8
++#define RESET_CONTROL_COLD_RST_MASK              0x00000100
++#define RESET_CONTROL_COLD_RST_GET(x)            (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB)
++#define RESET_CONTROL_COLD_RST_SET(x)            (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK)
++
++#define RESET_CAUSE_LAST_MSB                     2
++#define RESET_CAUSE_LAST_LSB                     0
++#define RESET_CAUSE_LAST_MASK                    0x00000007
++#define RESET_CAUSE_LAST_GET(x)                  (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB)
++#define RESET_CAUSE_LAST_SET(x)                  (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* __AR6KHWREG_H__ */
+diff --git a/drivers/ar6000/include/a_config.h b/drivers/ar6000/include/a_config.h
+new file mode 100644
+index 0000000..627b298
+--- /dev/null
++++ b/drivers/ar6000/include/a_config.h
+@@ -0,0 +1,27 @@
++#ifndef _A_CONFIG_H_
++#define _A_CONFIG_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * This file contains software configuration options that enables
++ * specific software "features"
++ */
++#include "../ar6000/config_linux.h"
++
++#endif
+diff --git a/drivers/ar6000/include/a_debug.h b/drivers/ar6000/include/a_debug.h
+new file mode 100644
+index 0000000..4b0b351
+--- /dev/null
++++ b/drivers/ar6000/include/a_debug.h
+@@ -0,0 +1,41 @@
++#ifndef _A_DEBUG_H_
++#define _A_DEBUG_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_types.h>
++#include <a_osapi.h>
++
++#define DBG_INFO		0x00000001
++#define DBG_ERROR		0x00000002
++#define DBG_WARNING		0x00000004
++#define DBG_SDIO		0x00000008
++#define DBG_HIF			0x00000010
++#define DBG_HTC			0x00000020
++#define DBG_WMI			0x00000040
++#define DBG_WMI2		0x00000080
++#define DBG_DRIVER		0x00000100
++
++#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
++
++#include "../ar6000/debug_linux.h"
++
++#endif
+diff --git a/drivers/ar6000/include/a_drv.h b/drivers/ar6000/include/a_drv.h
+new file mode 100644
+index 0000000..07e52d1
+--- /dev/null
++++ b/drivers/ar6000/include/a_drv.h
+@@ -0,0 +1,28 @@
++#ifndef _A_DRV_H_
++#define _A_DRV_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/athdrv_linux.h"
++
++#endif /* _ADRV_H_ */
+diff --git a/drivers/ar6000/include/a_drv_api.h b/drivers/ar6000/include/a_drv_api.h
+new file mode 100644
+index 0000000..7531726
+--- /dev/null
++++ b/drivers/ar6000/include/a_drv_api.h
+@@ -0,0 +1,185 @@
++#ifndef _A_DRV_API_H_
++#define _A_DRV_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/****************************************************************************/
++/****************************************************************************/
++/**                                                                        **/
++/** WMI related hooks                                                      **/
++/**                                                                        **/
++/****************************************************************************/
++/****************************************************************************/
++
++#include <ar6000_api.h>
++
++#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList)	\
++	ar6000_channelList_rx((devt), (numChan), (chanList))
++
++#define A_WMI_SET_NUMDATAENDPTS(devt, num)	\
++	ar6000_set_numdataendpts((devt), (num))
++
++#define A_WMI_CONTROL_TX(devt, osbuf, streamID)	\
++	ar6000_control_tx((devt), (osbuf), (streamID))
++
++#define A_WMI_TARGETSTATS_EVENT(devt, pStats)	\
++	ar6000_targetStats_event((devt), (pStats))
++
++#define A_WMI_SCANCOMPLETE_EVENT(devt, status)	\
++	ar6000_scanComplete_event((devt), (status))
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++
++#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg)	\
++	ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg))
++
++#define A_WMI_DSET_CLOSE(devt, access_cookie)	\
++	ar6000_dset_close((devt), (access_cookie))
++
++#endif
++
++#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \
++	ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg))
++
++#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \
++	ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo))
++
++#define A_WMI_REGDOMAIN_EVENT(devt, regCode)	\
++	ar6000_regDomain_event((devt), (regCode))
++
++#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info)	\
++	ar6000_neighborReport_event((devt), (numAps), (info))
++
++#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus)	\
++	ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus))
++
++#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast)	\
++	ar6000_tkip_micerr_event((devt), (keyid), (ismcast))
++
++#define A_WMI_BITRATE_RX(devt, rateKbps)	\
++	ar6000_bitrate_rx((devt), (rateKbps))
++
++#define A_WMI_TXPWR_RX(devt, txPwr)	\
++	ar6000_txPwr_rx((devt), (txPwr))
++
++#define A_WMI_READY_EVENT(devt, datap, phyCap)	\
++	ar6000_ready_event((devt), (datap), (phyCap))
++
++#define A_WMI_DBGLOG_INIT_DONE(ar) \
++        ar6000_dbglog_init_done(ar);
++
++#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi)	\
++	ar6000_rssiThreshold_event((devt), (newThreshold), (rssi))
++
++#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal)	\
++	ar6000_reportError_event((devt), (errorVal))
++
++#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \
++	ar6000_roam_tbl_event((devt), (pTbl))
++
++#define A_WMI_ROAM_DATA_EVENT(devt, p) \
++	ar6000_roam_data_event((devt), (p))
++
++#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters)	\
++	ar6000_wow_list_event((devt), (num_filters), (wow_filters))
++
++#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion)  \
++	ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion))
++
++#define A_WMI_IPTOS_TO_USERPRIORITY(pkt)    \
++	ar6000_iptos_to_userPriority((pkt))
++
++#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list)	\
++	ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list))
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++
++#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \
++	ar6000_gpio_intr_rx((intr_mask), (input_values))
++
++#define A_WMI_GPIO_DATA_RX(reg_id, value) \
++	ar6000_gpio_data_rx((reg_id), (value))
++
++#define A_WMI_GPIO_ACK_RX() \
++	ar6000_gpio_ack_rx()
++
++#endif
++
++#ifdef SEND_EVENT_TO_APP
++
++#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \
++	ar6000_send_event_to_app((ar), (eventId), (datap), (len))
++
++#else
++
++#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len)
++
++#endif
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \
++	ar6000_tcmd_rx_report_event((devt), (results), (len))
++#endif
++
++#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source)    \
++    ar6000_hbChallengeResp_event((devt), (cookie), (source))
++
++#define A_WMI_TX_RETRY_ERR_EVENT(devt) \
++	ar6000_tx_retry_err_event((devt))
++
++#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \
++	ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr))
++
++#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \
++	ar6000_lqThresholdEvent_rx((devt), (range), (lqVal))
++
++#define A_WMI_RATEMASK_RX(devt, ratemask) \
++	ar6000_ratemask_rx((devt), (ratemask))
++
++#define A_WMI_KEEPALIVE_RX(devt, configured)    \
++        ar6000_keepalive_rx((devt), (configured))
++
++#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len)   \
++        ar6000_bssInfo_event_rx((ar), (datap), (len))
++
++#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \
++        ar6000_dbglog_event((ar), (dropped), (buffer), (length));
++
++#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \
++    ar6000_indicate_tx_activity((devt),(trafficClass), TRUE)
++
++#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \
++    ar6000_indicate_tx_activity((devt),(trafficClass), FALSE)
++
++/****************************************************************************/
++/****************************************************************************/
++/**                                                                        **/
++/** HTC related hooks                                                      **/
++/**                                                                        **/
++/****************************************************************************/
++/****************************************************************************/
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/drivers/ar6000/include/a_osapi.h b/drivers/ar6000/include/a_osapi.h
+new file mode 100644
+index 0000000..7d60867
+--- /dev/null
++++ b/drivers/ar6000/include/a_osapi.h
+@@ -0,0 +1,28 @@
++#ifndef _A_OSAPI_H_
++#define _A_OSAPI_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/osapi_linux.h"
++
++#endif /* _OSAPI_H_ */
+diff --git a/drivers/ar6000/include/a_types.h b/drivers/ar6000/include/a_types.h
+new file mode 100644
+index 0000000..e2ed090
+--- /dev/null
++++ b/drivers/ar6000/include/a_types.h
+@@ -0,0 +1,28 @@
++#ifndef _A_TYPES_H_
++#define _A_TYPES_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/athtypes_linux.h"
++
++#endif /* _ATHTYPES_H_ */
+diff --git a/drivers/ar6000/include/ar6000_api.h b/drivers/ar6000/include/ar6000_api.h
+new file mode 100644
+index 0000000..abe5de7
+--- /dev/null
++++ b/drivers/ar6000/include/ar6000_api.h
+@@ -0,0 +1,29 @@
++#ifndef _AR6000_API_H_
++#define _AR6000_API_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the API to access the OS dependent atheros host driver
++ * by the WMI or WLAN generic modules.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/ar6xapi_linux.h"
++
++#endif /* _AR6000_API_H */
++
+diff --git a/drivers/ar6000/include/ar6000_diag.h b/drivers/ar6000/include/ar6000_diag.h
+new file mode 100644
+index 0000000..2df131d
+--- /dev/null
++++ b/drivers/ar6000/include/ar6000_diag.h
+@@ -0,0 +1,38 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef AR6000_DIAG_H_
++#define AR6000_DIAG_H_
++
++
++A_STATUS
++ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++A_STATUS
++ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++A_STATUS
++ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                    A_UCHAR *data, A_UINT32 length);
++
++A_STATUS
++ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                     A_UCHAR *data, A_UINT32 length);
++
++#endif /*AR6000_DIAG_H_*/
+diff --git a/drivers/ar6000/include/athdefs.h b/drivers/ar6000/include/athdefs.h
+new file mode 100644
+index 0000000..c28c871
+--- /dev/null
++++ b/drivers/ar6000/include/athdefs.h
+@@ -0,0 +1,85 @@
++#ifndef __ATHDEFS_H__
++#define __ATHDEFS_H__
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains definitions that may be used across both
++ * Host and Target software.  Nothing here is module-dependent
++ * or platform-dependent.
++ */
++
++/*
++ * Generic error codes that can be used by hw, sta, ap, sim, dk
++ * and any other environments. Since these are enums, feel free to
++ * add any more codes that you need.
++ */
++
++typedef enum {
++    A_ERROR = -1,               /* Generic error return */
++    A_OK = 0,                   /* success */
++                                /* Following values start at 1 */
++    A_DEVICE_NOT_FOUND,         /* not able to find PCI device */
++    A_NO_MEMORY,                /* not able to allocate memory, not available */
++    A_MEMORY_NOT_AVAIL,         /* memory region is not free for mapping */
++    A_NO_FREE_DESC,             /* no free descriptors available */
++    A_BAD_ADDRESS,              /* address does not match descriptor */
++    A_WIN_DRIVER_ERROR,         /* used in NT_HW version, if problem at init */
++    A_REGS_NOT_MAPPED,          /* registers not correctly mapped */
++    A_EPERM,                    /* Not superuser */
++    A_EACCES,                   /* Access denied */
++    A_ENOENT,                   /* No such entry, search failed, etc. */
++    A_EEXIST,                   /* The object already exists (can't create) */
++    A_EFAULT,                   /* Bad address fault */
++    A_EBUSY,                    /* Object is busy */
++    A_EINVAL,                   /* Invalid parameter */
++    A_EMSGSIZE,                 /* Inappropriate message buffer length */
++    A_ECANCELED,                /* Operation canceled */
++    A_ENOTSUP,                  /* Operation not supported */
++    A_ECOMM,                    /* Communication error on send */
++    A_EPROTO,                   /* Protocol error */
++    A_ENODEV,                   /* No such device */
++    A_EDEVNOTUP,                /* device is not UP */
++    A_NO_RESOURCE,              /* No resources for requested operation */
++    A_HARDWARE,                 /* Hardware failure */
++    A_PENDING,                  /* Asynchronous routine; will send up results la
++ter (typically in callback) */
++    A_EBADCHANNEL,              /* The channel cannot be used */
++    A_DECRYPT_ERROR,            /* Decryption error */
++    A_PHY_ERROR,                /* RX PHY error */
++    A_CONSUMED                  /* Object was consumed */
++} A_STATUS;
++
++#define A_SUCCESS(x)        (x == A_OK)
++#define A_FAILED(x)         (!A_SUCCESS(x))
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++/*
++ * The following definition is WLAN specific definition
++ */
++typedef enum {
++    MODE_11A = 0,   /* 11a Mode */
++    MODE_11G = 1,   /* 11g + 11b Mode */
++    MODE_11B = 2,   /* 11b Mode */
++    MODE_11GONLY = 3, /* 11g only Mode */
++    MODE_UNKNOWN = 4,
++    MODE_MAX = 4
++} WLAN_PHY_MODE;
++
++typedef enum {
++    WLAN_11A_CAPABILITY   = 1,
++    WLAN_11G_CAPABILITY   = 2,
++    WLAN_11AG_CAPABILITY  = 3,
++}WLAN_CAPABILITY;
++
++#endif /* __ATHDEFS_H__ */
+diff --git a/drivers/ar6000/include/athdrv.h b/drivers/ar6000/include/athdrv.h
+new file mode 100644
+index 0000000..19da97e
+--- /dev/null
++++ b/drivers/ar6000/include/athdrv.h
+@@ -0,0 +1,32 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHDRV_H_
++#define _ATHDRV_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _ATHDRV_H_ */
+diff --git a/drivers/ar6000/include/athendpack.h b/drivers/ar6000/include/athendpack.h
+new file mode 100644
+index 0000000..42921ae
+--- /dev/null
++++ b/drivers/ar6000/include/athendpack.h
+@@ -0,0 +1,41 @@
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ * @file: athendpack.h
++ *
++ * @abstract: end compiler-specific structure packing
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#ifdef VXWORKS
++#endif /* VXWORKS */
++
++#ifdef LINUX
++#endif /* LINUX */
++
++#ifdef QNX
++#endif /* QNX */
++
++#ifdef INTEGRITY
++#include "integrity/athendpack_integrity.h"
++#endif /* INTEGRITY */
++
++#ifdef NUCLEUS
++#endif /* NUCLEUS */
++
++#ifdef UNDER_CE
++#include "../os/wince/include/athendpack_wince.h"
++#endif /* WINCE */
++
+diff --git a/drivers/ar6000/include/athstartpack.h b/drivers/ar6000/include/athstartpack.h
+new file mode 100644
+index 0000000..6632cc2
+--- /dev/null
++++ b/drivers/ar6000/include/athstartpack.h
+@@ -0,0 +1,42 @@
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ * @file: athstartpack.h
++ *
++ * @abstract: start compiler-specific structure packing
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef VXWORKS
++#endif /* VXWORKS */
++
++#ifdef LINUX
++#endif /* LINUX */
++
++#ifdef QNX
++#endif /* QNX */
++
++#ifdef INTEGRITY
++#include "integrity/athstartpack_integrity.h"
++#endif /* INTEGRITY */
++
++#ifdef NUCLEUS
++#endif /* NUCLEUS */
++
++#ifdef UNDER_CE
++#include "../os/wince/include/athstartpack_wince.h"
++#endif /* WINCE */
++
+diff --git a/drivers/ar6000/include/bmi.h b/drivers/ar6000/include/bmi.h
+new file mode 100644
+index 0000000..2eb7134
+--- /dev/null
++++ b/drivers/ar6000/include/bmi.h
+@@ -0,0 +1,100 @@
++#ifndef _BMI_H_
++#define _BMI_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * BMI declarations and prototypes
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "hif.h"
++#include "a_osapi.h"
++#include "bmi_msg.h"
++
++void
++BMIInit(void);
++
++A_STATUS
++BMIDone(HIF_DEVICE *device);
++
++A_STATUS
++BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info);
++
++A_STATUS
++BMIReadMemory(HIF_DEVICE *device,
++              A_UINT32 address,
++              A_UCHAR *buffer,
++              A_UINT32 length);
++
++A_STATUS
++BMIWriteMemory(HIF_DEVICE *device,
++               A_UINT32 address,
++               A_UCHAR *buffer,
++               A_UINT32 length);
++
++A_STATUS
++BMIExecute(HIF_DEVICE *device,
++           A_UINT32 address,
++           A_UINT32 *param);
++
++A_STATUS
++BMISetAppStart(HIF_DEVICE *device,
++               A_UINT32 address);
++
++A_STATUS
++BMIReadSOCRegister(HIF_DEVICE *device,
++                   A_UINT32 address,
++                   A_UINT32 *param);
++
++A_STATUS
++BMIWriteSOCRegister(HIF_DEVICE *device,
++                    A_UINT32 address,
++                    A_UINT32 param);
++
++A_STATUS
++BMIrompatchInstall(HIF_DEVICE *device,
++                   A_UINT32 ROM_addr,
++                   A_UINT32 RAM_addr,
++                   A_UINT32 nbytes,
++                   A_UINT32 do_activate,
++                   A_UINT32 *patch_id);
++
++A_STATUS
++BMIrompatchUninstall(HIF_DEVICE *device,
++                     A_UINT32 rompatch_id);
++
++A_STATUS
++BMIrompatchActivate(HIF_DEVICE *device,
++                    A_UINT32 rompatch_count,
++                    A_UINT32 *rompatch_list);
++
++A_STATUS
++BMIrompatchDeactivate(HIF_DEVICE *device,
++                      A_UINT32 rompatch_count,
++                      A_UINT32 *rompatch_list);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _BMI_H_ */
+diff --git a/drivers/ar6000/include/bmi_msg.h b/drivers/ar6000/include/bmi_msg.h
+new file mode 100644
+index 0000000..7c91ef4
+--- /dev/null
++++ b/drivers/ar6000/include/bmi_msg.h
+@@ -0,0 +1,199 @@
++#ifndef __BMI_MSG_H__
++#define __BMI_MSG_H__
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * Bootloader Messaging Interface (BMI)
++ *
++ * BMI is a very simple messaging interface used during initialization
++ * to read memory, write memory, execute code, and to define an
++ * application entry PC.
++ *
++ * It is used to download an application to AR6K, to provide
++ * patches to code that is already resident on AR6K, and generally
++ * to examine and modify state.  The Host has an opportunity to use
++ * BMI only once during bootup.  Once the Host issues a BMI_DONE
++ * command, this opportunity ends.
++ *
++ * The Host writes BMI requests to mailbox0, and reads BMI responses
++ * from mailbox0.   BMI requests all begin with a command
++ * (see below for specific commands), and are followed by
++ * command-specific data.
++ *
++ * Flow control:
++ * The Host can only issue a command once the Target gives it a
++ * "BMI Command Credit", using AR6K Counter #4.  As soon as the
++ * Target has completed a command, it issues another BMI Command
++ * Credit (so the Host can issue the next command).
++ *
++ * BMI handles all required Target-side cache flushing.
++ */
++
++
++/* Maximum data size used for BMI transfers */
++#define BMI_DATASZ_MAX                     32
++
++/* BMI Commands */
++
++#define BMI_NO_COMMAND                      0
++
++#define BMI_DONE                            1
++        /*
++         * Semantics: Host is done using BMI
++         * Request format:
++         *    A_UINT32      command (BMI_DONE)
++         * Response format: none
++         */
++
++#define BMI_READ_MEMORY                     2
++        /*
++         * Semantics: Host reads AR6K memory
++         * Request format:
++         *    A_UINT32      command (BMI_READ_MEMORY)
++         *    A_UINT32      address
++         *    A_UINT32      length, at most BMI_DATASZ_MAX
++         * Response format:
++         *    A_UINT8       data[length]
++         */
++
++#define BMI_WRITE_MEMORY                    3
++        /*
++         * Semantics: Host writes AR6K memory
++         * Request format:
++         *    A_UINT32       command (BMI_WRITE_MEMORY)
++         *    A_UINT32      address
++         *    A_UINT32      length, at most BMI_DATASZ_MAX
++         *    A_UINT8       data[length]
++         * Response format: none
++         */
++
++#define BMI_EXECUTE                         4
++        /*
++         * Semantics: Causes AR6K to execute code
++         * Request format:
++         *    A_UINT32      command (BMI_EXECUTE)
++         *    A_UINT32      address
++         *    A_UINT32      parameter
++         * Response format:
++         *    A_UINT32      return value
++         */
++
++#define BMI_SET_APP_START                   5
++        /*
++         * Semantics: Set Target application starting address
++         * Request format:
++         *    A_UINT32      command (BMI_SET_APP_START)
++         *    A_UINT32      address
++         * Response format: none
++         */
++
++#define BMI_READ_SOC_REGISTER               6
++        /*
++         * Semantics: Read a 32-bit Target SOC register.
++         * Request format:
++         *    A_UINT32      command (BMI_READ_REGISTER)
++         *    A_UINT32      address
++         * Response format:
++         *    A_UINT32      value
++         */
++
++#define BMI_WRITE_SOC_REGISTER              7
++        /*
++         * Semantics: Write a 32-bit Target SOC register.
++         * Request format:
++         *    A_UINT32      command (BMI_WRITE_REGISTER)
++         *    A_UINT32      address
++         *    A_UINT32      value
++         *
++         * Response format: none
++         */
++
++#define BMI_GET_TARGET_ID                  8
++#define BMI_GET_TARGET_INFO                8
++        /*
++         * Semantics: Fetch the 4-byte Target information
++         * Request format:
++         *    A_UINT32      command (BMI_GET_TARGET_ID/INFO)
++         * Response format1 (old firmware):
++         *    A_UINT32      TargetVersionID
++         * Response format2 (newer firmware):
++         *    A_UINT32      TARGET_VERSION_SENTINAL
++         *    struct bmi_target_info;
++         */
++
++struct bmi_target_info {
++    A_UINT32 target_info_byte_count; /* size of this structure */
++    A_UINT32 target_ver;             /* Target Version ID */
++    A_UINT32 target_type;            /* Target type */
++};
++#define TARGET_VERSION_SENTINAL 0xffffffff
++#define TARGET_TYPE_AR6001 1
++#define TARGET_TYPE_AR6002 2
++
++
++#define BMI_ROMPATCH_INSTALL               9
++        /*
++         * Semantics: Install a ROM Patch.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_INSTALL)
++         *    A_UINT32      Target ROM Address
++         *    A_UINT32      Target RAM Address
++         *    A_UINT32      Size, in bytes
++         *    A_UINT32      Activate? 1-->activate;
++         *                            0-->install but do not activate
++         * Response format:
++         *    A_UINT32      PatchID
++         */
++
++#define BMI_ROMPATCH_UNINSTALL             10
++        /*
++         * Semantics: Uninstall a previously-installed ROM Patch,
++         * automatically deactivating, if necessary.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_UNINSTALL)
++         *    A_UINT32      PatchID
++         *
++         * Response format: none
++         */
++
++#define BMI_ROMPATCH_ACTIVATE              11
++        /*
++         * Semantics: Activate a list of previously-installed ROM Patches.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_ACTIVATE)
++         *    A_UINT32      rompatch_count
++         *    A_UINT32      PatchID[rompatch_count]
++         *
++         * Response format: none
++         */
++
++#define BMI_ROMPATCH_DEACTIVATE            12
++        /*
++         * Semantics: Deactivate a list of active ROM Patches.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_DEACTIVATE)
++         *    A_UINT32      rompatch_count
++         *    A_UINT32      PatchID[rompatch_count]
++         *
++         * Response format: none
++         */
++
++
++#endif /* __BMI_MSG_H__ */
+diff --git a/drivers/ar6000/include/common_drv.h b/drivers/ar6000/include/common_drv.h
+new file mode 100644
+index 0000000..1bdc3da
+--- /dev/null
++++ b/drivers/ar6000/include/common_drv.h
+@@ -0,0 +1,61 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++
++#ifndef COMMON_DRV_H_
++#define COMMON_DRV_H_
++
++#include "hif.h"
++#include "htc_packet.h"
++
++
++
++/* structure that is the state information for the default credit distribution callback
++ * drivers should instantiate (zero-init as well) this structure in their driver instance
++ * and pass it as a context to the HTC credit distribution functions */
++typedef struct _COMMON_CREDIT_STATE_INFO {
++    int TotalAvailableCredits;      /* total credits in the system at startup */
++    int CurrentFreeCredits;         /* credits available in the pool that have not been
++                                       given out to endpoints */
++    HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist;  /* pointer to the lowest priority endpoint dist struct */
++} COMMON_CREDIT_STATE_INFO;
++
++
++/* HTC TX packet tagging definitions */
++#define AR6K_CONTROL_PKT_TAG    HTC_TX_PACKET_TAG_USER_DEFINED
++#define AR6K_DATA_PKT_TAG       (AR6K_CONTROL_PKT_TAG + 1)
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* OS-independent APIs */
++A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo);
++A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,  A_UCHAR *data, A_UINT32 length);
++A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
++void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
++A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /*COMMON_DRV_H_*/
+diff --git a/drivers/ar6000/include/dbglog.h b/drivers/ar6000/include/dbglog.h
+new file mode 100644
+index 0000000..3d1e528
+--- /dev/null
++++ b/drivers/ar6000/include/dbglog.h
+@@ -0,0 +1,107 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions and data structures associated with
++ * the log based debug mechanism.
++ *
++ */
++
++#ifndef _DBGLOG_H_
++#define _DBGLOG_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define DBGLOG_TIMESTAMP_OFFSET          0
++#define DBGLOG_TIMESTAMP_MASK            0x0000FFFF /* Bit 0-15. Contains bit
++                                                       8-23 of the LF0 timer */
++#define DBGLOG_DBGID_OFFSET              16
++#define DBGLOG_DBGID_MASK                0x03FF0000 /* Bit 16-25 */
++#define DBGLOG_DBGID_NUM_MAX             256 /* Upper limit is width of mask */
++
++#define DBGLOG_MODULEID_OFFSET           26
++#define DBGLOG_MODULEID_MASK             0x3C000000 /* Bit 26-29 */
++#define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
++
++/*
++ * Please ensure that the definition of any new module intrduced is captured
++ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The
++ * structure is required for the parser to correctly pick up the values for
++ * different modules.
++ */
++#define DBGLOG_MODULEID_START
++#define DBGLOG_MODULEID_INF                   0
++#define DBGLOG_MODULEID_WMI                   1
++#define DBGLOG_MODULEID_CSERV                 2
++#define DBGLOG_MODULEID_PM                    3
++#define DBGLOG_MODULEID_TXRX_MGMTBUF          4
++#define DBGLOG_MODULEID_TXRX_TXBUF            5
++#define DBGLOG_MODULEID_TXRX_RXBUF            6
++#define DBGLOG_MODULEID_WOW                   7
++#define DBGLOG_MODULEID_WHAL                  8
++#define DBGLOG_MODULEID_END
++
++#define DBGLOG_NUM_ARGS_OFFSET             30
++#define DBGLOG_NUM_ARGS_MASK               0xC0000000 /* Bit 30-31 */
++#define DBGLOG_NUM_ARGS_MAX                2 /* Upper limit is width of mask */
++
++#define DBGLOG_MODULE_LOG_ENABLE_OFFSET    0
++#define DBGLOG_MODULE_LOG_ENABLE_MASK      0x0000FFFF
++
++#define DBGLOG_REPORTING_ENABLED_OFFSET    16
++#define DBGLOG_REPORTING_ENABLED_MASK      0x00010000
++
++#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17
++#define DBGLOG_TIMESTAMP_RESOLUTION_MASK   0x000E0000
++
++#define DBGLOG_REPORT_SIZE_OFFSET          20
++#define DBGLOG_REPORT_SIZE_MASK            0x3FF00000
++
++#define DBGLOG_LOG_BUFFER_SIZE             1500
++#define DBGLOG_DBGID_DEFINITION_LEN_MAX    64
++
++struct dbglog_buf_s {
++    struct dbglog_buf_s *next;
++    A_INT8              *buffer;
++    A_UINT32             bufsize;
++    A_UINT32             length;
++    A_UINT32             count;
++    A_UINT32             free;
++};
++
++struct dbglog_hdr_s {
++    struct dbglog_buf_s *dbuf;
++    A_UINT32             dropped;
++};
++
++struct dbglog_config_s {
++    A_UINT32                    cfgvalid; /* Mask with valid config bits */
++    union {
++        /* TODO: Take care of endianness */
++        struct {
++            A_UINT32            mmask:16; /* Mask of modules with logging on */
++            A_UINT32            rep:1; /* Reporting enabled or not */
++            A_UINT32            tsr:3; /* Time stamp resolution. Def: 1 ms */
++            A_UINT32            size:10; /* Report size in number of messages */
++            A_UINT32            reserved:2;
++        } dbglog_config;
++
++        A_UINT32                value;
++    } u;
++};
++
++#define cfgmmask                   u.dbglog_config.mmask
++#define cfgrep                     u.dbglog_config.rep
++#define cfgtsr                     u.dbglog_config.tsr
++#define cfgsize                    u.dbglog_config.size
++#define cfgvalue                   u.value
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_H_ */
+diff --git a/drivers/ar6000/include/dbglog_api.h b/drivers/ar6000/include/dbglog_api.h
+new file mode 100644
+index 0000000..06c8102
+--- /dev/null
++++ b/drivers/ar6000/include/dbglog_api.h
+@@ -0,0 +1,46 @@
++#ifndef _DBGLOG_API_H_
++#define _DBGLOG_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * This file contains host side debug primitives.
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dbglog.h"
++
++#define DBGLOG_HOST_LOG_BUFFER_SIZE            DBGLOG_LOG_BUFFER_SIZE
++
++#define DBGLOG_GET_DBGID(arg) \
++    ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
++
++#define DBGLOG_GET_MODULEID(arg) \
++    ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
++
++#define DBGLOG_GET_NUMARGS(arg) \
++    ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
++
++#define DBGLOG_GET_TIMESTAMP(arg) \
++    ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_API_H_ */
+diff --git a/drivers/ar6000/include/dbglog_id.h b/drivers/ar6000/include/dbglog_id.h
+new file mode 100644
+index 0000000..ce22b16
+--- /dev/null
++++ b/drivers/ar6000/include/dbglog_id.h
+@@ -0,0 +1,307 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions of the debug identifiers for different
++ * modules.
++ *
++ */
++
++#ifndef _DBGLOG_ID_H_
++#define _DBGLOG_ID_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
++ * Please ensure that the definition of any new debugid introduced is captured
++ * between the <MODULE>_DBGID_DEFINITION_START and
++ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
++ * parser to correctly pick up the values for different debug identifiers.
++ */
++
++/* INF debug identifier definitions */
++#define INF_DBGID_DEFINITION_START
++#define INF_ASSERTION_FAILED                          1
++#define INF_TARGET_ID                                 2
++#define INF_DBGID_DEFINITION_END
++
++/* WMI debug identifier definitions */
++#define WMI_DBGID_DEFINITION_START
++#define WMI_CMD_RX_XTND_PKT_TOO_SHORT                 1
++#define WMI_EXTENDED_CMD_NOT_HANDLED                  2
++#define WMI_CMD_RX_PKT_TOO_SHORT                      3
++#define WMI_CALLING_WMI_EXTENSION_FN                  4
++#define WMI_CMD_NOT_HANDLED                           5
++#define WMI_IN_SYNC                                   6
++#define WMI_TARGET_WMI_SYNC_CMD                       7
++#define WMI_SET_SNR_THRESHOLD_PARAMS                  8
++#define WMI_SET_RSSI_THRESHOLD_PARAMS                 9
++#define WMI_SET_LQ_TRESHOLD_PARAMS                   10
++#define WMI_TARGET_CREATE_PSTREAM_CMD                11
++#define WMI_WI_DTM_INUSE                             12
++#define WMI_TARGET_DELETE_PSTREAM_CMD                13
++#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD       14
++#define WMI_TARGET_GET_BIT_RATE_CMD                  15
++#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS       16
++#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD        17
++#define WMI_TARGET_GET_TX_PWR_CMD                    18
++#define WMI_FREE_EVBUF_WMIBUF                        19
++#define WMI_FREE_EVBUF_DATABUF                       20
++#define WMI_FREE_EVBUF_BADFLAG                       21
++#define WMI_HTC_RX_ERROR_DATA_PACKET                 22
++#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX             23
++#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT      24
++#define WMI_SENDING_READY_EVENT                      25
++#define WMI_SETPOWER_MDOE_TO_MAXPERF                 26
++#define WMI_SETPOWER_MDOE_TO_REC                     27
++#define WMI_BSSINFO_EVENT_FROM                       28
++#define WMI_TARGET_GET_STATS_CMD                     29
++#define WMI_SENDING_SCAN_COMPLETE_EVENT              30
++#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT        31
++#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT       32
++#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT     33
++#define WMI_SENDING_ERROR_REPORT_EVENT               34
++#define WMI_SENDING_CAC_EVENT                        35
++#define WMI_TARGET_GET_ROAM_TABLE_CMD                36
++#define WMI_TARGET_GET_ROAM_DATA_CMD                 37
++#define WMI_SENDING_GPIO_INTR_EVENT                  38
++#define WMI_SENDING_GPIO_ACK_EVENT                   39
++#define WMI_SENDING_GPIO_DATA_EVENT                  40
++#define WMI_CMD_RX                                   41
++#define WMI_CMD_RX_XTND                              42
++#define WMI_EVENT_SEND                               43
++#define WMI_EVENT_SEND_XTND                          44
++#define WMI_DBGID_DEFINITION_END
++
++/* CSERV debug identifier definitions */
++#define CSERV_DBGID_DEFINITION_START
++#define CSERV_BEGIN_SCAN1                             1
++#define CSERV_BEGIN_SCAN2                             2
++#define CSERV_END_SCAN1                               3
++#define CSERV_END_SCAN2                               4
++#define CSERV_CHAN_SCAN_START                         5
++#define CSERV_CHAN_SCAN_STOP                          6
++#define CSERV_CHANNEL_OPPPORTUNITY                    7
++#define CSERV_NC_TIMEOUT                              8
++#define CSERV_BACK_HOME                              10
++#define CSERV_CHMGR_CH_CALLBACK1                     11
++#define CSERV_CHMGR_CH_CALLBACK2                     12
++#define CSERV_CHMGR_CH_CALLBACK3                     13
++#define CSERV_SET_SCAN_PARAMS1                       14
++#define CSERV_SET_SCAN_PARAMS2                       15
++#define CSERV_SET_SCAN_PARAMS3                       16
++#define CSERV_SET_SCAN_PARAMS4                       17
++#define CSERV_ABORT_SCAN                             18
++#define CSERV_NEWSTATE                               19
++#define CSERV_MINCHMGR_OP_END                        20
++#define CSERV_CHMGR_OP_END                           21
++#define CSERV_DISCONNECT_TIMEOUT                     22
++#define CSERV_ROAM_TIMEOUT                           23
++#define CSERV_FORCE_SCAN1                            24
++#define CSERV_FORCE_SCAN2                            25
++#define CSERV_FORCE_SCAN3                            26
++#define CSERV_UTIL_TIMEOUT                           27
++#define CSERV_RSSIPOLLER                             28
++#define CSERV_RETRY_CONNECT_TIMEOUT                  29
++#define CSERV_RSSIINDBMPOLLER                        30
++#define CSERV_BGSCAN_ENABLE                          31
++#define CSERV_BGSCAN_DISABLE                         32
++#define CSERV_WLAN_START_SCAN_CMD1                   33
++#define CSERV_WLAN_START_SCAN_CMD2                   34
++#define CSERV_WLAN_START_SCAN_CMD3                   35
++#define CSERV_START_SCAN_CMD                         36
++#define CSERV_START_FORCE_SCAN                       37
++#define CSERV_NEXT_CHAN                              38
++#define CSERV_SET_REGCODE                            39
++#define CSERV_START_ADHOC                            40
++#define CSERV_ADHOC_AT_HOME                          41
++#define CSERV_OPT_AT_HOME                            42
++#define CSERV_WLAN_CONNECT_CMD                       43
++#define CSERV_WLAN_RECONNECT_CMD                     44
++#define CSERV_WLAN_DISCONNECT_CMD                    45
++#define CSERV_BSS_CHANGE_CHANNEL                     46
++#define CSERV_BEACON_RX                              47
++#define CSERV_KEEPALIVE_CHECK                        48
++#define CSERV_RC_BEGIN_SCAN                          49
++#define CSERV_RC_SCAN_START                          50
++#define CSERV_RC_SCAN_STOP                           51
++#define CSERV_RC_NEXT                                52
++#define CSERV_RC_SCAN_END                            53
++#define CSERV_PROBE_CALLBACK                         54
++#define CSERV_ROAM1                                  55
++#define CSERV_ROAM2                                  56
++#define CSERV_ROAM3                                  57
++#define CSERV_CONNECT_EVENT                          58
++#define CSERV_DISCONNECT_EVENT                       59
++#define CSERV_BMISS_HANDLER1                         60
++#define CSERV_BMISS_HANDLER2                         61
++#define CSERV_BMISS_HANDLER3                         62
++#define CSERV_LOWRSSI_HANDLER                        63
++#define CSERV_WLAN_SET_PMKID_CMD                     64
++#define CSERV_RECONNECT_REQUEST                      65
++#define CSERV_KEYSPLUMBED_EVENT                      66
++#define CSERV_NEW_REG                                67
++#define CSERV_SET_RSSI_THOLD                         68
++#define CSERV_RSSITHRESHOLDCHECK                     69
++#define CSERV_RSSIINDBMTHRESHOLDCHECK                70
++#define CSERV_WLAN_SET_OPT_CMD1                      71
++#define CSERV_WLAN_SET_OPT_CMD2                      72
++#define CSERV_WLAN_SET_OPT_CMD3                      73
++#define CSERV_WLAN_SET_OPT_CMD4                      74
++#define CSERV_SCAN_CONNECT_STOP                      75
++#define CSERV_BMISS_HANDLER4                         76
++#define CSERV_INITIALIZE_TIMER                       77
++#define CSERV_ARM_TIMER                              78
++#define CSERV_DISARM_TIMER                           79
++#define CSERV_UNINITIALIZE_TIMER                     80
++#define CSERV_DISCONNECT_EVENT2                      81
++#define CSERV_SCAN_CONNECT_START                     82
++#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED            83
++#define CSERV_SET_SCAN_PARAMS5                       84
++#define CSERV_DBGID_DEFINITION_END
++
++/* TXRX debug identifier definitions */
++#define TXRX_TXBUF_DBGID_DEFINITION_START
++#define TXRX_TXBUF_ALLOCATE_BUF                      1
++#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX                 2
++#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ                  3
++#define TXRX_TXBUF_TXQ_DEPTH                         4
++#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ                 5
++#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ         6
++#define TXRX_TXBUF_INITIALIZE_TIMER                  7
++#define TXRX_TXBUF_ARM_TIMER                         8
++#define TXRX_TXBUF_DISARM_TIMER                      9
++#define TXRX_TXBUF_UNINITIALIZE_TIMER                10
++#define TXRX_TXBUF_DBGID_DEFINITION_END
++
++#define TXRX_RXBUF_DBGID_DEFINITION_START
++#define TXRX_RXBUF_ALLOCATE_BUF                      1
++#define TXRX_RXBUF_QUEUE_TO_HOST                     2
++#define TXRX_RXBUF_QUEUE_TO_WLAN                     3
++#define TXRX_RXBUF_ZERO_LEN_BUF                      4
++#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN  5
++#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF        6
++#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN         7
++#define TXRX_RXBUF_SEND_TO_RECV_MGMT                 8
++#define TXRX_RXBUF_SEND_TO_IEEE_LAYER                9
++#define TXRX_RXBUF_DBGID_DEFINITION_END
++
++#define TXRX_MGMTBUF_DBGID_DEFINITION_START
++#define TXRX_MGMTBUF_ALLOCATE_BUF                    1
++#define TXRX_MGMTBUF_ALLOCATE_SM_BUF                 2
++#define TXRX_MGMTBUF_ALLOCATE_RMBUF                  3
++#define TXRX_MGMTBUF_GET_BUF                         4
++#define TXRX_MGMTBUF_GET_SM_BUF                      5
++#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ                6
++#define TXRX_MGMTBUF_REAPED_BUF                      7
++#define TXRX_MGMTBUF_REAPED_SM_BUF                   8
++#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN              9
++#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN          10
++#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ                11
++#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ                12
++#define TXRX_MGMTBUF_PAUSE_TXQ                       13
++#define TXRX_MGMTBUF_RESUME_TXQ                      14
++#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT       15
++#define TXRX_MGMTBUF_DRAINQ                          16
++#define TXRX_MGMTBUF_INDICATE_Q_DRAINED              17
++#define TXRX_MGMTBUF_DBGID_DEFINITION_END
++
++/* PM (Power Module) debug identifier definitions */
++#define PM_DBGID_DEFINITION_START
++#define PM_INIT                                      1
++#define PM_ENABLE                                    2
++#define PM_SET_STATE                                 3
++#define PM_SET_POWERMODE                             4
++#define PM_CONN_NOTIFY                               5
++#define PM_REF_COUNT_NEGATIVE                        6
++#define PM_APSD_ENABLE                               7
++#define PM_UPDATE_APSD_STATE                         8
++#define PM_CHAN_OP_REQ                               9
++#define PM_SET_MY_BEACON_POLICY                      10
++#define PM_SET_ALL_BEACON_POLICY                     11
++#define PM_SET_PM_PARAMS1                            12
++#define PM_SET_PM_PARAMS2                            13
++#define PM_ADHOC_SET_PM_CAPS_FAIL                    14
++#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID              15
++#define PM_DBGID_DEFINITION_END
++
++/* Wake on Wireless debug identifier definitions */
++#define WOW_DBGID_DEFINITION_START
++#define WOW_INIT                                        1
++#define WOW_GET_CONFIG_DSET                             2
++#define WOW_NO_CONFIG_DSET                              3
++#define WOW_INVALID_CONFIG_DSET                         4
++#define WOW_USE_DEFAULT_CONFIG                          5
++#define WOW_SETUP_GPIO                                  6
++#define WOW_INIT_DONE                                   7
++#define WOW_SET_GPIO_PIN                                8
++#define WOW_CLEAR_GPIO_PIN                              9
++#define WOW_SET_WOW_MODE_CMD                            10
++#define WOW_SET_HOST_MODE_CMD                           11
++#define WOW_ADD_WOW_PATTERN_CMD                         12
++#define WOW_NEW_WOW_PATTERN_AT_INDEX                    13
++#define WOW_DEL_WOW_PATTERN_CMD                         14
++#define WOW_LIST_CONTAINS_PATTERNS                      15
++#define WOW_GET_WOW_LIST_CMD                            16
++#define WOW_INVALID_FILTER_ID                           17
++#define WOW_INVALID_FILTER_LISTID                       18
++#define WOW_NO_VALID_FILTER_AT_ID                       19
++#define WOW_NO_VALID_LIST_AT_ID                         20
++#define WOW_NUM_PATTERNS_EXCEEDED                       21
++#define WOW_NUM_LISTS_EXCEEDED                          22
++#define WOW_GET_WOW_STATS                               23
++#define WOW_CLEAR_WOW_STATS                             24
++#define WOW_WAKEUP_HOST                                 25
++#define WOW_EVENT_WAKEUP_HOST                           26
++#define WOW_EVENT_DISCARD                               27
++#define WOW_PATTERN_MATCH                               28
++#define WOW_PATTERN_NOT_MATCH                           29
++#define WOW_PATTERN_NOT_MATCH_OFFSET                    30
++#define WOW_DISABLED_HOST_ASLEEP                        31
++#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS             32
++#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND          33
++#define WOW_DBGID_DEFINITION_END
++
++/* WHAL debug identifier definitions */
++#define WHAL_DBGID_DEFINITION_START
++#define WHAL_ERROR_ANI_CONTROL                      1
++#define WHAL_ERROR_CHIP_TEST1                       2
++#define WHAL_ERROR_CHIP_TEST2                       3
++#define WHAL_ERROR_EEPROM_CHECKSUM                  4
++#define WHAL_ERROR_EEPROM_MACADDR                   5
++#define WHAL_ERROR_INTERRUPT_HIU                    6
++#define WHAL_ERROR_KEYCACHE_RESET                   7
++#define WHAL_ERROR_KEYCACHE_SET                     8
++#define WHAL_ERROR_KEYCACHE_TYPE                    9
++#define WHAL_ERROR_KEYCACHE_TKIPENTRY              10
++#define WHAL_ERROR_KEYCACHE_WEPLENGTH              11
++#define WHAL_ERROR_PHY_INVALID_CHANNEL             12
++#define WHAL_ERROR_POWER_AWAKE                     13
++#define WHAL_ERROR_POWER_SET                       14
++#define WHAL_ERROR_RECV_STOPDMA                    15
++#define WHAL_ERROR_RECV_STOPPCU                    16
++#define WHAL_ERROR_RESET_CHANNF1                   17
++#define WHAL_ERROR_RESET_CHANNF2                   18
++#define WHAL_ERROR_RESET_PM                        19
++#define WHAL_ERROR_RESET_OFFSETCAL                 20
++#define WHAL_ERROR_RESET_RFGRANT                   21
++#define WHAL_ERROR_RESET_RXFRAME                   22
++#define WHAL_ERROR_RESET_STOPDMA                   23
++#define WHAL_ERROR_RESET_RECOVER                   24
++#define WHAL_ERROR_XMIT_COMPUTE                    25
++#define WHAL_ERROR_XMIT_NOQUEUE                    26
++#define WHAL_ERROR_XMIT_ACTIVEQUEUE                27
++#define WHAL_ERROR_XMIT_BADTYPE                    28
++#define WHAL_DBGID_DEFINITION_END
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_ID_H_ */
+diff --git a/drivers/ar6000/include/dl_list.h b/drivers/ar6000/include/dl_list.h
+new file mode 100644
+index 0000000..4b9c581
+--- /dev/null
++++ b/drivers/ar6000/include/dl_list.h
+@@ -0,0 +1,114 @@
++/*
++ *
++ * Double-link list definitions (adapted from Atheros SDIO stack)
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#ifndef __DL_LIST_H___
++#define __DL_LIST_H___
++
++#define A_CONTAINING_STRUCT(address, struct_type, field_name)\
++            ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name)))
++
++/* list functions */
++/* pointers for the list */
++typedef struct _DL_LIST {
++    struct _DL_LIST *pPrev;
++    struct _DL_LIST *pNext;
++}DL_LIST, *PDL_LIST;
++/*
++ * DL_LIST_INIT , initialize doubly linked list
++*/
++#define DL_LIST_INIT(pList)\
++    {(pList)->pPrev = pList; (pList)->pNext = pList;}
++
++#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList)))
++#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext
++#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev
++/*
++ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member
++ * NOT: do not use this function if the items in the list are deleted inside the
++ * iteration loop
++*/
++#define ITERATE_OVER_LIST(pStart, pTemp) \
++    for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext)
++
++
++/* safe iterate macro that allows the item to be removed from the list
++ * the iteration continues to the next item in the list
++ */
++#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset)  \
++{                                                       \
++    PDL_LIST  pTemp;                                     \
++    pTemp = (pStart)->pNext;                            \
++    while (pTemp != (pStart)) {                         \
++        (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset);   \
++         pTemp = pTemp->pNext;                          \
++
++#define ITERATE_END }}
++
++/*
++ * DL_ListInsertTail - insert pAdd to the end of the list
++*/
++static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) {
++        /* insert at tail */
++    pAdd->pPrev = pList->pPrev;
++    pAdd->pNext = pList;
++    pList->pPrev->pNext = pAdd;
++    pList->pPrev = pAdd;
++    return pAdd;
++}
++
++/*
++ * DL_ListInsertHead - insert pAdd into the head of the list
++*/
++static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) {
++        /* insert at head */
++    pAdd->pPrev = pList;
++    pAdd->pNext = pList->pNext;
++    pList->pNext->pPrev = pAdd;
++    pList->pNext = pAdd;
++    return pAdd;
++}
++
++#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem))
++/*
++ * DL_ListRemove - remove pDel from list
++*/
++static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) {
++    pDel->pNext->pPrev = pDel->pPrev;
++    pDel->pPrev->pNext = pDel->pNext;
++        /* point back to itself just to be safe, incase remove is called again */
++    pDel->pNext = pDel;
++    pDel->pPrev = pDel;
++    return pDel;
++}
++
++/*
++ * DL_ListRemoveItemFromHead - get a list item from the head
++*/
++static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) {
++    PDL_LIST pItem = NULL;
++    if (pList->pNext != pList) {
++        pItem = pList->pNext;
++            /* remove the first item from head */
++        DL_ListRemove(pItem);
++    }
++    return pItem;
++}
++
++#endif /* __DL_LIST_H___ */
+diff --git a/drivers/ar6000/include/dset_api.h b/drivers/ar6000/include/dset_api.h
+new file mode 100644
+index 0000000..de5cc6a
+--- /dev/null
++++ b/drivers/ar6000/include/dset_api.h
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $
++ *
++ * Host-side DataSet API.
++ *
++ */
++
++#ifndef _DSET_API_H_
++#define _DSET_API_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/*
++ * Host-side DataSet support is optional, and is not
++ * currently required for correct operation.  To disable
++ * Host-side DataSet support, set this to 0.
++ */
++#ifndef CONFIG_HOST_DSET_SUPPORT
++#define CONFIG_HOST_DSET_SUPPORT 1
++#endif
++
++/* Called to send a DataSet Open Reply back to the Target. */
++A_STATUS wmi_dset_open_reply(struct wmi_t *wmip,
++                             A_UINT32 status,
++                             A_UINT32 access_cookie,
++                             A_UINT32 size,
++                             A_UINT32 version,
++                             A_UINT32 targ_handle,
++                             A_UINT32 targ_reply_fn,
++                             A_UINT32 targ_reply_arg);
++
++/* Called to send a DataSet Data Reply back to the Target. */
++A_STATUS wmi_dset_data_reply(struct wmi_t *wmip,
++                             A_UINT32 status,
++                             A_UINT8 *host_buf,
++                             A_UINT32 length,
++                             A_UINT32 targ_buf,
++                             A_UINT32 targ_reply_fn,
++                             A_UINT32 targ_reply_arg);
++
++#ifdef __cplusplus
++}
++#endif /* __cplusplus */
++
++
++#endif /* _DSET_API_H_ */
+diff --git a/drivers/ar6000/include/dset_internal.h b/drivers/ar6000/include/dset_internal.h
+new file mode 100644
+index 0000000..f0be380
+--- /dev/null
++++ b/drivers/ar6000/include/dset_internal.h
+@@ -0,0 +1,39 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __DSET_INTERNAL_H__
++#define __DSET_INTERNAL_H__
++
++/*
++ * Internal dset definitions, common for DataSet layer.
++ */
++
++#define DSET_TYPE_STANDARD      0
++#define DSET_TYPE_BPATCHED      1
++#define DSET_TYPE_COMPRESSED    2
++
++/* Dataset descriptor */
++
++typedef struct dset_descriptor_s {
++  struct dset_descriptor_s  *next;         /* List link. NULL only at the last
++                                              descriptor */
++  A_UINT16                   id;           /* Dset ID */
++  A_UINT16                   size;         /* Dset size. */
++  void                      *DataPtr;      /* Pointer to raw data for standard
++                                              DataSet or pointer to original
++                                              dset_descriptor for patched
++                                              DataSet */
++  A_UINT32                   data_type;    /* DSET_TYPE_*, above */
++
++  void                      *AuxPtr;       /* Additional data that might
++                                              needed for data_type. For
++                                              example, pointer to patch
++                                              Dataset descriptor for BPatch. */
++} dset_descriptor_t;
++
++#endif /* __DSET_INTERNAL_H__ */
+diff --git a/drivers/ar6000/include/dsetid.h b/drivers/ar6000/include/dsetid.h
+new file mode 100644
+index 0000000..85729f8
+--- /dev/null
++++ b/drivers/ar6000/include/dsetid.h
+@@ -0,0 +1,110 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __DSETID_H__
++#define __DSETID_H__
++
++/* Well-known DataSet IDs */
++#define DSETID_UNUSED                     0x00000000
++#define DSETID_BOARD_DATA                 0x00000001 /* Cal and board data */
++#define DSETID_REGDB                      0x00000002 /* Regulatory Database */
++#define DSETID_POWER_CONTROL              0x00000003 /* TX Pwr Lim & Ant Gain */
++#define DSETID_USER_CONFIG                0x00000004 /* User Configuration */
++
++#define DSETID_ANALOG_CONTROL_DATA_START  0x00000005
++#define DSETID_ANALOG_CONTROL_DATA_END    0x00000025
++/*
++ * Get DSETID for various reference clock speeds.
++ * For each speed there are three DataSets that correspond
++ * to the three columns of bank6 data (addr, 11a, 11b/g).
++ * This macro returns the dsetid of the first of those
++ * three DataSets.
++ */
++#define ANALOG_CONTROL_DATA_DSETID(refclk) \
++        (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
++
++/*
++ * There are TWO STARTUP_PATCH DataSets.
++ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
++ * earlier systems.  On AR6002, it is applied after BMI, just like
++ * DSETID_STARTUP_PATCH2.
++ */
++#define DSETID_STARTUP_PATCH              0x00000026
++#define DSETID_GPIO_CONFIG_PATCH          0x00000027
++#define DSETID_WLANREGS                   0x00000028 /* override wlan regs */
++#define DSETID_STARTUP_PATCH2             0x00000029
++
++#define DSETID_WOW_CONFIG                 0x00000090 /* WoW Configuration */
++
++/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
++#define DSETID_INI_DATA                   0x00000100
++/* Reserved for WHAL INI Tables: 0x100..0x11f */
++#define DSETID_INI_DATA_END               0x0000011f
++
++#define DSETID_VENDOR_START               0x00010000 /* Vendor-defined DataSets */
++
++#define DSETID_INDEX_END                  0xfffffffe /* Reserved to indicate the
++                                                        end of a memory-based
++                                                        DataSet Index */
++#define DSETID_INDEX_FREE                 0xffffffff /* An unused index entry */
++
++/*
++ * PATCH DataSet format:
++ * A list of patches, terminated by a patch with
++ * address=PATCH_END.
++ *
++ * This allows for patches to be stored in flash.
++ */
++struct patch_s {
++    A_UINT32 *address;
++    A_UINT32  data;
++};
++
++/*
++ * Skip some patches.  Can be used to erase a single patch in a
++ * patch DataSet without having to re-write the DataSet.  May
++ * also be used to embed information for use by subsequent
++ * patch code.  The "data" in a PATCH_SKIP tells how many
++ * bytes of length "patch_s" to skip.
++ */
++#define PATCH_SKIP      ((A_UINT32 *)0x00000000)
++
++/*
++ * Execute code at the address specified by "data".
++ * The address of the patch structure is passed as
++ * the one parameter.
++ */
++#define PATCH_CODE_ABS  ((A_UINT32 *)0x00000001)
++
++/*
++ * Same as PATCH_CODE_ABS, but treat "data" as an
++ * offset from the start of the patch word.
++ */
++#define PATCH_CODE_REL  ((A_UINT32 *)0x00000002)
++
++/* Mark the end of this patch DataSet. */
++#define PATCH_END       ((A_UINT32 *)0xffffffff)
++
++/*
++ * A DataSet which contains a Binary Patch to some other DataSet
++ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
++ * Such a BPatch DataSet consists of BPatch metadata followed by
++ * the bdiff bytes.  BPatch metadata consists of a single 32-bit
++ * word that contains the size of the BPatched final image.
++ *
++ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
++ * to create "diffs":
++ *  bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
++ * Then add BPatch metadata to the start of "diffs".
++ *
++ * NB: There are some implementation-induced restrictions
++ * on which DataSets can be BPatched.
++ */
++#define DSETID_BPATCH_FLAG                0x80000000
++
++#endif /* __DSETID_H__ */
+diff --git a/drivers/ar6000/include/gpio.h b/drivers/ar6000/include/gpio.h
+new file mode 100644
+index 0000000..2203c7e
+--- /dev/null
++++ b/drivers/ar6000/include/gpio.h
+@@ -0,0 +1,34 @@
++/*
++ * Copyright (c) 2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#if defined(AR6001)
++#define GPIO_PIN_COUNT 18
++#else
++#define GPIO_PIN_COUNT 18
++#endif
++
++/*
++ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
++ * NB: These match hardware order, so that addresses can
++ * easily be computed.
++ */
++#define GPIO_ID_OUT             0x00000000
++#define GPIO_ID_OUT_W1TS        0x00000001
++#define GPIO_ID_OUT_W1TC        0x00000002
++#define GPIO_ID_ENABLE          0x00000003
++#define GPIO_ID_ENABLE_W1TS     0x00000004
++#define GPIO_ID_ENABLE_W1TC     0x00000005
++#define GPIO_ID_IN              0x00000006
++#define GPIO_ID_STATUS          0x00000007
++#define GPIO_ID_STATUS_W1TS     0x00000008
++#define GPIO_ID_STATUS_W1TC     0x00000009
++#define GPIO_ID_PIN0            0x0000000a
++#define GPIO_ID_PIN(n)          (GPIO_ID_PIN0+(n))
++
++#define GPIO_LAST_REGISTER_ID   GPIO_ID_PIN(17)
++#define GPIO_ID_NONE            0xffffffff
+diff --git a/drivers/ar6000/include/gpio_api.h b/drivers/ar6000/include/gpio_api.h
+new file mode 100644
+index 0000000..8078aa5
+--- /dev/null
++++ b/drivers/ar6000/include/gpio_api.h
+@@ -0,0 +1,57 @@
++#ifndef _GPIO_API_H_
++#define _GPIO_API_H_
++/*
++ * Copyright 2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * Host-side General Purpose I/O API.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $
++ */
++
++/*
++ * Send a command to the Target in order to change output on GPIO pins.
++ */
++A_STATUS wmi_gpio_output_set(struct wmi_t *wmip,
++                             A_UINT32 set_mask,
++                             A_UINT32 clear_mask,
++                             A_UINT32 enable_mask,
++                             A_UINT32 disable_mask);
++
++/*
++ * Send a command to the Target requesting input state of GPIO pins.
++ */
++A_STATUS wmi_gpio_input_get(struct wmi_t *wmip);
++
++/*
++ * Send a command to the Target to change the value of a GPIO register.
++ */
++A_STATUS wmi_gpio_register_set(struct wmi_t *wmip,
++                               A_UINT32 gpioreg_id,
++                               A_UINT32 value);
++
++/*
++ * Send a command to the Target to fetch the value of a GPIO register.
++ */
++A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id);
++
++/*
++ * Send a command to the Target, acknowledging some GPIO interrupts.
++ */
++A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask);
++
++#endif /* _GPIO_API_H_ */
+diff --git a/drivers/ar6000/include/hif.h b/drivers/ar6000/include/hif.h
+new file mode 100644
+index 0000000..846a69f
+--- /dev/null
++++ b/drivers/ar6000/include/hif.h
+@@ -0,0 +1,296 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * HIF specific declarations and prototypes
++ */
++
++#ifndef _HIF_H_
++#define _HIF_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++
++typedef struct htc_callbacks HTC_CALLBACKS;
++typedef struct hif_device HIF_DEVICE;
++
++/*
++ * direction - Direction of transfer (HIF_READ/HIF_WRITE).
++ */
++#define HIF_READ                    0x00000001
++#define HIF_WRITE                   0x00000002
++#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
++
++/*
++ *     type - An interface may support different kind of read/write commands.
++ *            The command type is divided into a basic and an extended command
++ *            and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO.
++ */
++#define HIF_BASIC_IO                0x00000004
++#define HIF_EXTENDED_IO             0x00000008
++#define HIF_TYPE_MASK               (HIF_BASIC_IO | HIF_EXTENDED_IO)
++
++/*
++ *     emode - This indicates the whether the command is to be executed in a
++ *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
++ *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
++ *             implemented using the asynchronous mode allowing the the bus
++ *             driver to indicate the completion of operation through the
++ *             registered callback routine. The requirement primarily comes
++ *             from the contexts these operations get called from (a driver's
++ *             transmit context or the ISR context in case of receive).
++ *             Support for both of these modes is essential.
++ */
++#define HIF_SYNCHRONOUS             0x00000010
++#define HIF_ASYNCHRONOUS            0x00000020
++#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
++
++/*
++ *     dmode - An interface may support different kinds of commands based on
++ *             the tradeoff between the amount of data it can carry and the
++ *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
++ *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
++ *             to the nearest block size by padding. The size of the block is
++ *             configurable at compile time using the HIF_BLOCK_SIZE and is
++ *             negotiated with the target during initialization after the
++ *             dragon interrupts are enabled.
++ */
++#define HIF_BYTE_BASIS              0x00000040
++#define HIF_BLOCK_BASIS             0x00000080
++#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
++
++/*
++ *     amode - This indicates if the address has to be incremented on dragon
++ *             after every read/write operation (HIF?FIXED_ADDRESS/
++ *             HIF_INCREMENTAL_ADDRESS).
++ */
++#define HIF_FIXED_ADDRESS           0x00000100
++#define HIF_INCREMENTAL_ADDRESS     0x00000200
++#define HIF_AMODE_MASK              (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
++
++#define HIF_WR_ASYNC_BYTE_FIX   \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_WR_ASYNC_BYTE_INC   \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_ASYNC_BLOCK_INC  \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_SYNC_BYTE_FIX    \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_WR_SYNC_BYTE_INC    \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_SYNC_BLOCK_INC  \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BYTE_INC    \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BYTE_FIX    \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BYTE_FIX   \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BLOCK_FIX  \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BYTE_INC   \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_ASYNC_BLOCK_INC  \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BLOCK_INC  \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++
++
++typedef enum {
++    HIF_DEVICE_POWER_STATE = 0,
++    HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++    HIF_DEVICE_GET_MBOX_ADDR,
++    HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
++    HIF_DEVICE_GET_IRQ_PROC_MODE,
++    HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
++} HIF_DEVICE_CONFIG_OPCODE;
++
++/*
++ * HIF CONFIGURE definitions:
++ *
++ *   HIF_DEVICE_GET_MBOX_BLOCK_SIZE
++ *   input : none
++ *   output : array of 4 A_UINT32s
++ *   notes: block size is returned for each mailbox (4)
++ *
++ *   HIF_DEVICE_GET_MBOX_ADDR
++ *   input : none
++ *   output : array of 4 A_UINT32
++ *   notes: address is returned for each mailbox (4) in the array
++ *
++ *   HIF_DEVICE_GET_PENDING_EVENTS_FUNC
++ *   input : none
++ *   output: HIF_PENDING_EVENTS_FUNC function pointer
++ *   notes: this is optional for the HIF layer, if the request is
++ *          not handled then it indicates that the upper layer can use
++ *          the standard device methods to get pending events (IRQs, mailbox messages etc..)
++ *          otherwise it can call the function pointer to check pending events.
++ *
++ *   HIF_DEVICE_GET_IRQ_PROC_MODE
++ *   input : none
++ *   output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode)
++ *   note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF
++ *         layer can report whether IRQ processing is requires synchronous behavior or
++ *         can be processed using asynchronous bus requests (typically faster).
++ *
++ *   HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC
++ *   input :
++ *   output : HIF_MASK_UNMASK_RECV_EVENT function pointer
++ *   notes: this is optional for the HIF layer.  The HIF layer may require a special mechanism
++ *          to mask receive message events.  The upper layer can call this pointer when it needs
++ *          to mask/unmask receive events (in case it runs out of buffers).
++ *
++ *
++ */
++
++typedef enum {
++    HIF_DEVICE_IRQ_SYNC_ONLY,   /* for HIF implementations that require the DSR to process all
++                                   interrupts before returning */
++    HIF_DEVICE_IRQ_ASYNC_SYNC,  /* for HIF implementations that allow DSR to process interrupts
++                                   using ASYNC I/O (that is HIFAckInterrupt can be called at a
++                                   later time */
++} HIF_DEVICE_IRQ_PROCESSING_MODE;
++
++#define HIF_MAX_DEVICES                 1
++
++struct htc_callbacks {
++    A_UCHAR *name;
++    A_UINT32 id;
++    A_STATUS (* deviceInsertedHandler)(void *hif_handle);
++    A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status);
++    A_STATUS (* deviceSuspendHandler)(void *htc_handle);
++    A_STATUS (* deviceResumeHandler)(void *htc_handle);
++    A_STATUS (* deviceWakeupHandler)(void *htc_handle);
++    A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status);
++    A_STATUS (* dsrHandler)(void *htc_handle);
++};
++
++
++#define HIF_OTHER_EVENTS     (1 << 0)   /* other interrupts (non-Recv) are pending, host
++                                           needs to read the register table to figure out what */
++#define HIF_RECV_MSG_AVAIL   (1 << 1)   /* pending recv packet */
++
++typedef struct _HIF_PENDING_EVENTS_INFO {
++    A_UINT32 Events;
++    A_UINT32 LookAhead;
++} HIF_PENDING_EVENTS_INFO;
++
++    /* function to get pending events , some HIF modules use special mechanisms
++     * to detect packet available and other interrupts */
++typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE              *device,
++                                             HIF_PENDING_EVENTS_INFO *pEvents,
++                                             void                    *AsyncContext);
++
++#define HIF_MASK_RECV    TRUE
++#define HIF_UNMASK_RECV  FALSE
++    /* function to mask recv events */
++typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE  *device,
++                                                A_BOOL      Mask,
++                                                void        *AsyncContext);
++
++
++/*
++ * This API is used by the HTC layer to initialize the HIF layer and to
++ * register different callback routines. Support for following events has
++ * been captured - DSR, Read/Write completion, Device insertion/removal,
++ * Device suspension/resumption/wakeup. In addition to this, the API is
++ * also used to register the name and the revision of the chip. The latter
++ * can be used to verify the revision of the chip read from the device
++ * before reporting it to HTC.
++ */
++int HIFInit(HTC_CALLBACKS *callbacks);
++
++/*
++ * This API is used to provide the read/write interface over the specific bus
++ * interface.
++ * address - Starting address in the dragon's address space. For mailbox
++ *           writes, it refers to the start of the mbox boundary. It should
++ *           be ensured that the last byte falls on the mailbox's EOM. For
++ *           mailbox reads, it refers to the end of the mbox boundary.
++ * buffer - Pointer to the buffer containg the data to be transmitted or
++ *          received.
++ * length - Amount of data to be transmitted or received.
++ * request - Characterizes the attributes of the command.
++ */
++A_STATUS
++HIFReadWrite(HIF_DEVICE    *device,
++             A_UINT32       address,
++             A_UCHAR       *buffer,
++             A_UINT32       length,
++             A_UINT32       request,
++             void          *context);
++
++/*
++ * This can be initiated from the unload driver context ie when the HTCShutdown
++ * routine is called.
++ */
++void HIFShutDownDevice(HIF_DEVICE *device);
++
++/*
++ * This should translate to an acknowledgment to the bus driver indicating that
++ * the previous interrupt request has been serviced and the all the relevant
++ * sources have been cleared. HTC is ready to process more interrupts.
++ * This should prevent the bus driver from raising an interrupt unless the
++ * previous one has been serviced and acknowledged using the previous API.
++ */
++void HIFAckInterrupt(HIF_DEVICE *device);
++
++void HIFMaskInterrupt(HIF_DEVICE *device);
++
++void HIFUnMaskInterrupt(HIF_DEVICE *device);
++
++/*
++ * This set of functions are to be used by the bus driver to notify
++ * the HIF module about various events.
++ * These are not implemented if the bus driver provides an alternative
++ * way for this notification though callbacks for instance.
++ */
++int HIFInsertEventNotify(void);
++
++int HIFRemoveEventNotify(void);
++
++int HIFIRQEventNotify(void);
++
++int HIFRWCompleteEventNotify(void);
++
++/*
++ * This function associates a opaque handle with the HIF layer
++ * to be used in communication with upper layer i.e. HTC.
++ * This would normaly be a pointer to htc_target data structure.
++ */
++void HIFSetHandle(void *hif_handle, void *handle);
++
++A_STATUS
++HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
++                   void *config, A_UINT32 configLen);
++
++
++struct device;
++struct device*
++HIFGetOSDevice(HIF_DEVICE *device);
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HIF_H_ */
+diff --git a/drivers/ar6000/include/host_version.h b/drivers/ar6000/include/host_version.h
+new file mode 100644
+index 0000000..c090115
+--- /dev/null
++++ b/drivers/ar6000/include/host_version.h
+@@ -0,0 +1,49 @@
++#ifndef _HOST_VERSION_H_
++#define _HOST_VERSION_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains version information for the sample host driver for the
++ * AR6000 chip
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include <AR6K_version.h>
++
++/*
++ * The version number is made up of major, minor, patch and build
++ * numbers. These are 16 bit numbers.  The build and release script will
++ * set the build number using a Perforce counter.  Here the build number is
++ * set to 9999 so that builds done without the build-release script are easily
++ * identifiable.
++ */
++
++#define ATH_SW_VER_MAJOR      __VER_MAJOR_
++#define ATH_SW_VER_MINOR      __VER_MINOR_
++#define ATH_SW_VER_PATCH      __VER_PATCH_
++#define ATH_SW_VER_BUILD 9999
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HOST_VERSION_H_ */
+diff --git a/drivers/ar6000/include/htc.h b/drivers/ar6000/include/htc.h
+new file mode 100644
+index 0000000..152d867
+--- /dev/null
++++ b/drivers/ar6000/include/htc.h
+@@ -0,0 +1,190 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++
++#ifndef __HTC_H__
++#define __HTC_H__
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field))
++
++#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \
++        (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)]))
++
++/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a
++ * structure using only the type and field name.
++ * Use these macros if there is the potential for unaligned buffer accesses. */
++#define A_GET_UINT16_FIELD(p,type,field) \
++    ASSEMBLE_UNALIGNED_UINT16(p,\
++                              A_OFFSETOF(type,field) + 1, \
++                              A_OFFSETOF(type,field))
++
++#define A_SET_UINT16_FIELD(p,type,field,value) \
++{                                              \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value);        \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \
++}
++
++#define A_GET_UINT8_FIELD(p,type,field) \
++            ((A_UINT8 *)(p))[A_OFFSETOF(type,field)]
++
++#define A_SET_UINT8_FIELD(p,type,field,value) \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value)
++
++/****** DANGER DANGER ***************
++ *
++ *   The frame header length and message formats defined herein were
++ *   selected to accommodate optimal alignment for target processing.  This reduces code
++ *   size and improves performance.
++ *
++ *   Any changes to the header length may alter the alignment and cause exceptions
++ *   on the target. When adding to the message structures insure that fields are
++ *   properly aligned.
++ *
++ */
++
++/* HTC frame header */
++typedef PREPACK struct _HTC_FRAME_HDR{
++        /* do not remove or re-arrange these fields, these are minimally required
++         * to take advantage of 4-byte lookaheads in some hardware implementations */
++    A_UINT8   EndpointID;
++    A_UINT8   Flags;
++    A_UINT16  PayloadLen;       /* length of data (including trailer) that follows the header */
++
++    /***** end of 4-byte lookahead ****/
++
++    A_UINT8   ControlBytes[2];
++
++    /* message payload starts after the header */
++
++} POSTPACK HTC_FRAME_HDR;
++
++/* frame header flags */
++#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0)
++#define HTC_FLAGS_RECV_TRAILER       (1 << 1)
++
++
++#define HTC_HDR_LENGTH  (sizeof(HTC_FRAME_HDR))
++#define HTC_MAX_TRAILER_LENGTH   255
++#define HTC_MAX_PAYLOAD_LENGTH   (2048 - sizeof(HTC_FRAME_HDR))
++
++/* HTC control message IDs */
++typedef enum {
++    HTC_MSG_READY_ID = 1,
++    HTC_MSG_CONNECT_SERVICE_ID = 2,
++    HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3,
++    HTC_MSG_SETUP_COMPLETE_ID = 4,
++} HTC_MSG_IDS;
++
++#define HTC_MAX_CONTROL_MESSAGE_LENGTH  256
++
++/* base message ID header */
++typedef PREPACK struct {
++    A_UINT16 MessageID;
++} POSTPACK HTC_UNKNOWN_MSG;
++
++/* HTC ready message
++ * direction : target-to-host  */
++typedef PREPACK struct {
++    A_UINT16  MessageID;    /* ID */
++    A_UINT16  CreditCount;  /* number of credits the target can offer */
++    A_UINT16  CreditSize;   /* size of each credit */
++    A_UINT8   MaxEndpoints; /* maximum number of endpoints the target has resources for */
++    A_UINT8   _Pad1;
++} POSTPACK HTC_READY_MSG;
++
++#define HTC_SERVICE_META_DATA_MAX_LENGTH 128
++
++/* connect service
++ * direction : host-to-target */
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    A_UINT16  ServiceID;           /* service ID of the service to connect to */
++    A_UINT16  ConnectionFlags;     /* connection flags */
++
++#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2)  /* reduce credit dribbling when
++                                                             the host needs credits */
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK             (0x3)
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH        0x0
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF          0x1
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS     0x2
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY             0x3
++
++    A_UINT8   ServiceMetaLength;   /* length of meta data that follows */
++    A_UINT8   _Pad1;
++
++    /* service-specific meta data starts after the header */
++
++} POSTPACK HTC_CONNECT_SERVICE_MSG;
++
++/* connect response
++ * direction : target-to-host */
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    A_UINT16  ServiceID;            /* service ID that the connection request was made */
++    A_UINT8   Status;               /* service connection status */
++    A_UINT8   EndpointID;           /* assigned endpoint ID */
++    A_UINT16  MaxMsgSize;           /* maximum expected message size on this endpoint */
++    A_UINT8   ServiceMetaLength;    /* length of meta data that follows */
++    A_UINT8   _Pad1;
++
++    /* service-specific meta data starts after the header */
++
++} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG;
++
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    /* currently, no other fields */
++} POSTPACK HTC_SETUP_COMPLETE_MSG;
++
++
++/* connect response status codes */
++#define HTC_SERVICE_SUCCESS      0  /* success */
++#define HTC_SERVICE_NOT_FOUND    1  /* service could not be found */
++#define HTC_SERVICE_FAILED       2  /* specific service failed the connect */
++#define HTC_SERVICE_NO_RESOURCES 3  /* no resources (i.e. no more endpoints) */
++#define HTC_SERVICE_NO_MORE_EP   4  /* specific service is not allowing any more
++                                       endpoints */
++
++/* report record IDs */
++typedef enum {
++    HTC_RECORD_NULL  = 0,
++    HTC_RECORD_CREDITS   = 1,
++    HTC_RECORD_LOOKAHEAD = 2,
++} HTC_RPT_IDS;
++
++typedef PREPACK struct {
++    A_UINT8 RecordID;     /* Record ID */
++    A_UINT8 Length;       /* Length of record */
++} POSTPACK HTC_RECORD_HDR;
++
++typedef PREPACK struct {
++    A_UINT8 EndpointID;     /* Endpoint that owns these credits */
++    A_UINT8 Credits;        /* credits to report since last report */
++} POSTPACK HTC_CREDIT_REPORT;
++
++typedef PREPACK struct {
++    A_UINT8 PreValid;         /* pre valid guard */
++    A_UINT8 LookAhead[4];     /* 4 byte lookahead */
++    A_UINT8 PostValid;        /* post valid guard */
++
++   /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes.
++    * The PreValid bytes must equal the inverse of the PostValid byte */
++
++} POSTPACK HTC_LOOKAHEAD_REPORT;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++
++#endif /* __HTC_H__ */
++
+diff --git a/drivers/ar6000/include/htc_api.h b/drivers/ar6000/include/htc_api.h
+new file mode 100644
+index 0000000..e75692d
+--- /dev/null
++++ b/drivers/ar6000/include/htc_api.h
+@@ -0,0 +1,439 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _HTC_API_H_
++#define _HTC_API_H_
++
++#include <htc.h>
++#include <htc_services.h>
++#include "htc_packet.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* TODO.. for BMI */
++#define ENDPOINT1 0
++// TODO -remove me, but we have to fix BMI first
++#define HTC_MAILBOX_NUM_MAX    4
++
++
++/* ------ Endpoint IDS ------ */
++typedef enum
++{
++    ENDPOINT_UNUSED = -1,
++    ENDPOINT_0 = 0,
++    ENDPOINT_1 = 1,
++    ENDPOINT_2 = 2,
++    ENDPOINT_3,
++    ENDPOINT_4,
++    ENDPOINT_5,
++    ENDPOINT_6,
++    ENDPOINT_7,
++    ENDPOINT_8,
++    ENDPOINT_MAX,
++} HTC_ENDPOINT_ID;
++
++/* this is the amount of header room required by users of HTC */
++#define HTC_HEADER_LEN         HTC_HDR_LENGTH
++
++typedef void *HTC_HANDLE;
++
++typedef A_UINT16 HTC_SERVICE_ID;
++
++typedef struct _HTC_INIT_INFO {
++    void   (*AddInstance)(HTC_HANDLE);
++    void   (*DeleteInstance)(void *Instance);
++    void   (*TargetFailure)(void *Instance, A_STATUS Status);
++} HTC_INIT_INFO;
++
++/* per service connection send completion */
++typedef void   (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *);
++/* per service connection pkt received */
++typedef void   (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *);
++
++/* Optional per service connection receive buffer re-fill callback,
++ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
++ * to the network stack.  The driver never gets the packets back from the OS.  For these OSes
++ * a refill callback can be used to allocate and re-queue buffers into HTC.
++ *
++ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and
++ * the driver can re-queue these buffers into HTC. In this regard a refill callback is
++ * unnecessary */
++typedef void   (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint);
++
++/* Optional per service connection callback when a send queue is full. This can occur if the
++ * host continues queueing up TX packets faster than credits can arrive
++ * To prevent the host (on some Oses like Linux) from continuously queueing packets
++ * and consuming resources, this callback is provided so that that the host
++ * can disable TX in the subsystem (i.e. network stack)
++ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this
++ * closed loop mechanism will prevent the network stack from overunning the NIC */
++typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint);
++/* Optional per service connection callback when a send queue is available for receive new packet. */
++typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint);
++
++typedef struct _HTC_EP_CALLBACKS {
++    void                     *pContext;     /* context for each callback */
++    HTC_EP_SEND_PKT_COMPLETE EpTxComplete;  /* tx completion callback for connected endpoint */
++    HTC_EP_RECV_PKT          EpRecv;        /* receive callback for connected endpoint */
++    HTC_EP_RECV_REFILL       EpRecvRefill;  /* OPTIONAL receive re-fill callback for connected endpoint */
++    HTC_EP_SEND_QUEUE_FULL   EpSendFull;    /* OPTIONAL send full callback */
++    HTC_EP_SEND_QUEUE_AVAIL  EpSendAvail;    /* OPTIONAL send available callback */
++} HTC_EP_CALLBACKS;
++
++/* service connection information */
++typedef struct _HTC_SERVICE_CONNECT_REQ {
++    HTC_SERVICE_ID   ServiceID;                 /* service ID to connect to */
++    A_UINT16         ConnectionFlags;           /* connection flags, see htc protocol definition */
++    A_UINT8         *pMetaData;                 /* ptr to optional service-specific meta-data */
++    A_UINT8          MetaDataLength;            /* optional meta data length */
++    HTC_EP_CALLBACKS EpCallbacks;               /* endpoint callbacks */
++    int              MaxSendQueueDepth;         /* maximum depth of any send queue */
++} HTC_SERVICE_CONNECT_REQ;
++
++/* service connection response information */
++typedef struct _HTC_SERVICE_CONNECT_RESP {
++    A_UINT8     *pMetaData;             /* caller supplied buffer to optional meta-data */
++    A_UINT8     BufferLength;           /* length of caller supplied buffer */
++    A_UINT8     ActualLength;           /* actual length of meta data */
++    HTC_ENDPOINT_ID Endpoint;           /* endpoint to communicate over */
++    int         MaxMsgLength;           /* max length of all messages over this endpoint */
++    A_UINT8     ConnectRespCode;        /* connect response code from target */
++} HTC_SERVICE_CONNECT_RESP;
++
++/* endpoint distribution structure */
++typedef struct _HTC_ENDPOINT_CREDIT_DIST {
++    struct _HTC_ENDPOINT_CREDIT_DIST *pNext;
++    struct _HTC_ENDPOINT_CREDIT_DIST *pPrev;
++    HTC_SERVICE_ID      ServiceID;          /* Service ID (set by HTC) */
++    HTC_ENDPOINT_ID     Endpoint;           /* endpoint for this distribution struct (set by HTC) */
++    A_UINT32            DistFlags;          /* distribution flags, distribution function can
++                                               set default activity using SET_EP_ACTIVE() macro */
++    int                 TxCreditsNorm;      /* credits for normal operation, anything above this
++                                               indicates the endpoint is over-subscribed, this field
++                                               is only relevant to the credit distribution function */
++    int                 TxCreditsMin;       /* floor for credit distribution, this field is
++                                               only relevant to the credit distribution function */
++    int                 TxCreditsAssigned;  /* number of credits assigned to this EP, this field
++                                               is only relevant to the credit dist function */
++    int                 TxCredits;          /* current credits available, this field is used by
++                                               HTC to determine whether a message can be sent or
++                                               must be queued */
++    int                 TxCreditsToDist;    /* pending credits to distribute on this endpoint, this
++                                               is set by HTC when credit reports arrive.
++                                               The credit distribution functions sets this to zero
++                                               when it distributes the credits */
++    int                 TxCreditsSeek;      /* this is the number of credits that the current pending TX
++                                               packet needs to transmit.  This is set by HTC when
++                                               and endpoint needs credits in order to transmit */
++    int                 TxCreditSize;       /* size in bytes of each credit (set by HTC) */
++    int                 TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */
++    void                *pHTCReserved;      /* reserved for HTC use */
++} HTC_ENDPOINT_CREDIT_DIST;
++
++#define HTC_EP_ACTIVE                            (1 << 31)
++
++/* macro to check if an endpoint has gone active, useful for credit
++ * distributions */
++#define IS_EP_ACTIVE(epDist)  ((epDist)->DistFlags & HTC_EP_ACTIVE)
++#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE
++
++    /* credit distibution code that is passed into the distrbution function,
++     * there are mandatory and optional codes that must be handled */
++typedef enum _HTC_CREDIT_DIST_REASON {
++    HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
++                                              send operations (MANDATORY) resulting in credit reports */
++    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
++    HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
++    HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
++                                              the distribution function */
++} HTC_CREDIT_DIST_REASON;
++
++typedef void (*HTC_CREDIT_DIST_CALLBACK)(void                     *Context,
++                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                         HTC_CREDIT_DIST_REASON   Reason);
++
++typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context,
++                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                         int                      TotalCredits);
++
++    /* endpoint statistics action */
++typedef enum _HTC_ENDPOINT_STAT_ACTION {
++    HTC_EP_STAT_SAMPLE = 0,                /* only read statistics */
++    HTC_EP_STAT_SAMPLE_AND_CLEAR = 1,      /* sample and immediately clear statistics */
++    HTC_EP_STAT_CLEAR                      /* clear only */
++} HTC_ENDPOINT_STAT_ACTION;
++
++    /* endpoint statistics */
++typedef struct _HTC_ENDPOINT_STATS {
++    A_UINT32  TxCreditLowIndications;  /* number of times the host set the credit-low flag in a send message on
++                                        this endpoint */
++    A_UINT32  TxIssued;               /* running count of TX packets issued */
++    A_UINT32  TxCreditRpts;           /* running count of total credit reports received for this endpoint */
++    A_UINT32  TxCreditRptsFromRx;
++    A_UINT32  TxCreditRptsFromOther;
++    A_UINT32  TxCreditRptsFromEp0;
++    A_UINT32  TxCreditsFromRx;        /* count of credits received via Rx packets on this endpoint */
++    A_UINT32  TxCreditsFromOther;     /* count of credits received via another endpoint */
++    A_UINT32  TxCreditsFromEp0;       /* count of credits received via another endpoint */
++    A_UINT32  TxCreditsConsummed;     /* count of consummed credits */
++    A_UINT32  TxCreditsReturned;      /* count of credits returned */
++    A_UINT32  RxReceived;             /* count of RX packets received */
++    A_UINT32  RxLookAheads;           /* count of lookahead records
++                                         found in messages received on this endpoint */
++} HTC_ENDPOINT_STATS;
++
++/* ------ Function Prototypes ------ */
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Initialize HTC
++  @function name: HTCInit
++  @input:  pInfo - initialization information
++  @output:
++  @return: A_OK on success
++  @notes: The caller initializes global HTC state and registers various instance
++          notification callbacks (see HTC_INIT_INFO).
++
++  @example:
++  @see also: HTCShutdown
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCInit(HTC_INIT_INFO *pInfo);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Get the underlying HIF device handle
++  @function name: HTCGetHifDevice
++  @input:  HTCHandle - handle passed into the AddInstance callback
++  @output:
++  @return: opaque HIF device handle usable in HIF API calls.
++  @notes:
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void       *HTCGetHifDevice(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Set the associated instance for the HTC handle
++  @function name: HTCSetInstance
++  @input:  HTCHandle - handle passed into the AddInstance callback
++           Instance - caller supplied instance object
++  @output:
++  @return:
++  @notes:  Caller must set the instance information for the HTC handle in order to receive
++           notifications for instance deletion (DeleteInstance callback is called) and for target
++           failure notification.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Set credit distribution parameters
++  @function name: HTCSetCreditDistribution
++  @input:  HTCHandle - HTC handle
++           pCreditDistCont - caller supplied context to pass into distribution functions
++           CreditDistFunc - Distribution function callback
++           CreditDistInit - Credit Distribution initialization callback
++           ServicePriorityOrder - Array containing list of service IDs, lowest index is highest
++                                  priority
++           ListLength - number of elements in ServicePriorityOrder
++  @output:
++  @return:
++  @notes:  The user can set a custom credit distribution function to handle special requirements
++           for each endpoint.  A default credit distribution routine can be used by setting
++           CreditInitFunc to NULL.  The default credit distribution is only provided for simple
++           "fair" credit distribution without regard to any prioritization.
++
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
++                                     void                     *pCreditDistContext,
++                                     HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
++                                     HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
++                                     HTC_SERVICE_ID           ServicePriorityOrder[],
++                                     int                      ListLength);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Wait for the target to indicate the HTC layer is ready
++  @function name: HTCWaitTarget
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes:  This API blocks until the target responds with an HTC ready message.
++           The caller should not connect services until the target has indicated it is
++           ready.
++  @example:
++  @see also: HTCConnectService
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCWaitTarget(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Start target service communications
++  @function name: HTCStart
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes: This API indicates to the target that the service connection phase is complete
++          and the target can freely start all connected services.  This API should only be
++          called AFTER all service connections have been made.  TCStart will issue a
++          SETUP_COMPLETE message to the target to indicate that all service connections
++          have been made and the target can start communicating over the endpoints.
++  @example:
++  @see also: HTCConnectService
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCStart(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Add receive packet to HTC
++  @function name: HTCAddReceivePkt
++  @input:  HTCHandle - HTC handle
++           pPacket - HTC receive packet to add
++  @output:
++  @return: A_OK on success
++  @notes:  user must supply HTC packets for capturing incomming HTC frames.  The caller
++           must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
++           macro.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Connect to an HTC service
++  @function name: HTCConnectService
++  @input:  HTCHandle - HTC handle
++           pReq - connection details
++  @output: pResp - connection response
++  @return:
++  @notes:  Service connections must be performed before HTCStart.  User provides callback handlers
++           for various endpoint events.
++  @example:
++  @see also: HTCStart
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCConnectService(HTC_HANDLE HTCHandle,
++                              HTC_SERVICE_CONNECT_REQ  *pReq,
++                              HTC_SERVICE_CONNECT_RESP *pResp);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Send an HTC packet
++  @function name: HTCSendPkt
++  @input:  HTCHandle - HTC handle
++           pPacket - packet to send
++  @output:
++  @return: A_OK
++  @notes:  Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro.
++           This interface is fully asynchronous.  On error, HTC SendPkt will
++           call the registered Endpoint callback to cleanup the packet.
++  @example:
++  @see also: HTCFlushEndpoint
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Stop HTC service communications
++  @function name: HTCStop
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes: HTC communications is halted.  All receive and pending TX packets will
++          be flushed.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCStop(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Shutdown HTC
++  @function name: HTCShutdown
++  @input:
++  @output:
++  @return:
++  @notes:  This cleans up all resources allocated by HTCInit().
++  @example:
++  @see also: HTCInit
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCShutDown(void);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Flush pending TX packets
++  @function name: HTCFlushEndpoint
++  @input:  HTCHandle - HTC handle
++           Endpoint - Endpoint to flush
++           Tag - flush tag
++  @output:
++  @return:
++  @notes:  The Tag parameter is used to selectively flush packets with matching tags.
++           The value of 0 forces all packets to be flush regardless of tag.
++  @example:
++  @see also: HTCSendPkt
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Dump credit distribution state
++  @function name: HTCDumpCreditStates
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes:  This dumps all credit distribution information to the debugger
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCDumpCreditStates(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Indicate a traffic activity change on an endpoint
++  @function name: HTCIndicateActivityChange
++  @input:  HTCHandle - HTC handle
++           Endpoint - endpoint in which activity has changed
++           Active - TRUE if active, FALSE if it has become inactive
++  @output:
++  @return:
++  @notes:  This triggers the registered credit distribution function to
++           re-adjust credits for active/inactive endpoints.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
++                                      HTC_ENDPOINT_ID Endpoint,
++                                      A_BOOL          Active);
++
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Get endpoint statistics
++  @function name: HTCGetEndpointStatistics
++  @input:  HTCHandle - HTC handle
++           Endpoint - Endpoint identifier
++           Action - action to take with statistics
++  @output:
++           pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR)
++
++  @return: TRUE if statistics profiling is enabled, otherwise FALSE.
++
++  @notes:  Statistics is a compile-time option and this function may return FALSE
++           if HTC is not compiled with profiling.
++
++           The caller can specify the statistic "action" to take when sampling
++           the statistics.  This includes:
++
++           HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values.
++           HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics
++                             are cleared.
++           HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for
++                   pStats
++
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_BOOL       HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
++                                      HTC_ENDPOINT_ID          Endpoint,
++                                      HTC_ENDPOINT_STAT_ACTION Action,
++                                      HTC_ENDPOINT_STATS       *pStats);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HTC_API_H_ */
+diff --git a/drivers/ar6000/include/htc_packet.h b/drivers/ar6000/include/htc_packet.h
+new file mode 100644
+index 0000000..9ce8718
+--- /dev/null
++++ b/drivers/ar6000/include/htc_packet.h
+@@ -0,0 +1,138 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef HTC_PACKET_H_
++#define HTC_PACKET_H_
++
++
++#include "dl_list.h"
++
++struct _HTC_PACKET;
++
++typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *);
++
++typedef A_UINT16 HTC_TX_TAG;
++
++typedef struct _HTC_TX_PACKET_INFO {
++    HTC_TX_TAG    Tag;            /* tag used to selective flush packets */
++} HTC_TX_PACKET_INFO;
++
++#define HTC_TX_PACKET_TAG_ALL          0    /* a tag of zero is reserved and used to flush ALL packets */
++#define HTC_TX_PACKET_TAG_INTERNAL     1                                /* internal tags start here */
++#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */
++
++typedef struct _HTC_RX_PACKET_INFO {
++    A_UINT32    Unused;          /* for future use and to make compilers happy */
++} HTC_RX_PACKET_INFO;
++
++/* wrapper around endpoint-specific packets */
++typedef struct _HTC_PACKET {
++    DL_LIST         ListLink;       /* double link */
++    void            *pPktContext;   /* caller's per packet specific context */
++
++    A_UINT8         *pBufferStart;  /* the true buffer start , the caller can
++                                       store the real buffer start here.  In
++                                       receive callbacks, the HTC layer sets pBuffer
++                                       to the start of the payload past the header. This
++                                       field allows the caller to reset pBuffer when it
++                                       recycles receive packets back to HTC */
++    /*
++     * Pointer to the start of the buffer. In the transmit
++     * direction this points to the start of the payload. In the
++     * receive direction, however, the buffer when queued up
++     * points to the start of the HTC header but when returned
++     * to the caller points to the start of the payload
++     */
++    A_UINT8         *pBuffer;       /* payload start (RX/TX) */
++    A_UINT32        BufferLength;   /* length of buffer */
++    A_UINT32        ActualLength;   /* actual length of payload */
++    int             Endpoint;       /* endpoint that this packet was sent/recv'd from */
++    A_STATUS        Status;         /* completion status */
++    union {
++        HTC_TX_PACKET_INFO  AsTx;   /* Tx Packet specific info */
++        HTC_RX_PACKET_INFO  AsRx;   /* Rx Packet specific info */
++    } PktInfo;
++
++    /* the following fields are for internal HTC use */
++    HTC_PACKET_COMPLETION Completion;   /* completion */
++    void                  *pContext;    /* HTC private completion context */
++    A_UINT32              HTCReserved;  /* reserved */
++} HTC_PACKET;
++
++
++
++#define COMPLETE_HTC_PACKET(p,status)        \
++{                                            \
++    (p)->Status = (status);                  \
++    (p)->Completion((p)->pContext,(p));      \
++}
++
++#define INIT_HTC_PACKET_INFO(p,b,len)             \
++{                                                 \
++    (p)->pBufferStart = (b);                      \
++    (p)->BufferLength = (len);                    \
++}
++
++/* macro to set an initial RX packet for refilling HTC */
++#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \
++{                                                 \
++    (p)->pPktContext = (c);                       \
++    (p)->pBuffer = (b);                           \
++    (p)->pBufferStart = (b);                      \
++    (p)->BufferLength = (len);                    \
++    (p)->Endpoint = (ep);                         \
++}
++
++/* fast macro to recycle an RX packet that will be re-queued to HTC */
++#define HTC_PACKET_RESET_RX(p)              \
++    (p)->pBuffer = (p)->pBufferStart
++
++/* macro to set packet parameters for TX */
++#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag)  \
++{                                                 \
++    (p)->pPktContext = (c);                       \
++    (p)->pBuffer = (b);                           \
++    (p)->ActualLength = (len);                    \
++    (p)->Endpoint = (ep);                         \
++    (p)->PktInfo.AsTx.Tag = (tag);                \
++}
++
++/* HTC Packet Queueing Macros */
++typedef DL_LIST HTC_PACKET_QUEUE;
++/* initialize queue */
++#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ))
++/* enqueue HTC packet to the tail of the queue */
++#define HTC_PACKET_ENQUEUE(pQ,p)  DL_ListInsertTail((pQ),&(p)->ListLink)
++/* test if a queue is empty */
++#define HTC_QUEUE_EMPTY(pQ)       DL_LIST_IS_EMPTY((pQ))
++/* get packet at head without removing it */
++#define HTC_GET_PKT_AT_HEAD(pQ)   A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink);
++/* remove a packet from the current list it is linked to */
++#define HTC_PACKET_REMOVE(p)      DL_ListRemove(&(p)->ListLink)
++
++/* dequeue an HTC packet from the head of the queue */
++static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) {
++    DL_LIST    *pItem = DL_ListRemoveItemFromHead(queue);
++    if (pItem != NULL) {
++        return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink);
++    }
++    return NULL;
++}
++
++#endif /*HTC_PACKET_H_*/
+diff --git a/drivers/ar6000/include/htc_services.h b/drivers/ar6000/include/htc_services.h
+new file mode 100644
+index 0000000..fc6fc29
+--- /dev/null
++++ b/drivers/ar6000/include/htc_services.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __HTC_SERVICES_H__
++#define __HTC_SERVICES_H__
++
++/* Current service IDs */
++
++typedef enum {
++    RSVD_SERVICE_GROUP  = 0,
++    WMI_SERVICE_GROUP   = 1,
++
++    HTC_TEST_GROUP = 254,
++    HTC_SERVICE_GROUP_LAST = 255
++}HTC_SERVICE_GROUP_IDS;
++
++#define MAKE_SERVICE_ID(group,index) \
++            (int)(((int)group << 8) | (int)(index))
++
++/* NOTE: service ID of 0x0000 is reserved and should never be used */
++#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1)
++#define WMI_CONTROL_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0)
++#define WMI_DATA_BE_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1)
++#define WMI_DATA_BK_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2)
++#define WMI_DATA_VI_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3)
++#define WMI_DATA_VO_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4)
++#define WMI_MAX_SERVICES  5
++
++/* raw stream service (i.e. flash, tcmd, calibration apps) */
++#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0)
++
++#endif /*HTC_SERVICES_H_*/
+diff --git a/drivers/ar6000/include/ieee80211.h b/drivers/ar6000/include/ieee80211.h
+new file mode 100644
+index 0000000..7090040
+--- /dev/null
++++ b/drivers/ar6000/include/ieee80211.h
+@@ -0,0 +1,342 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2006 Atheros Communications, Inc.
++ *
++ * Wireless Network driver for Atheros AR6001
++ * All rights reserved.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ */
++#ifndef _NET80211_IEEE80211_H_
++#define _NET80211_IEEE80211_H_
++
++#include "athstartpack.h"
++
++/*
++ * 802.11 protocol definitions.
++ */
++
++#define IEEE80211_ADDR_LEN  6       /* size of 802.11 address */
++/* is 802.11 address multicast/broadcast? */
++#define IEEE80211_IS_MULTICAST(_a)  (*(_a) & 0x01)
++#define IEEE80211_ADDR_EQ(addr1, addr2)     \
++    (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0)
++
++#define IEEE80211_KEYBUF_SIZE 16
++#define IEEE80211_MICBUF_SIZE (8+8)  /* space for both tx and rx */
++
++/*
++ * NB: these values are ordered carefully; there are lots of
++ * of implications in any reordering.  In particular beware
++ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
++ */
++#define IEEE80211_CIPHER_WEP            0
++#define IEEE80211_CIPHER_TKIP           1
++#define IEEE80211_CIPHER_AES_OCB        2
++#define IEEE80211_CIPHER_AES_CCM        3
++#define IEEE80211_CIPHER_CKIP           5
++#define IEEE80211_CIPHER_CCKM_KRK       6
++#define IEEE80211_CIPHER_NONE           7       /* pseudo value */
++
++#define IEEE80211_CIPHER_MAX            (IEEE80211_CIPHER_NONE+1)
++
++#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \
++        (((len) == 5) || ((len) == 13) || ((len) == 16))
++
++
++
++/*
++ * generic definitions for IEEE 802.11 frames
++ */
++PREPACK struct ieee80211_frame {
++    A_UINT8    i_fc[2];
++    A_UINT8    i_dur[2];
++    A_UINT8    i_addr1[IEEE80211_ADDR_LEN];
++    A_UINT8    i_addr2[IEEE80211_ADDR_LEN];
++    A_UINT8    i_addr3[IEEE80211_ADDR_LEN];
++    A_UINT8    i_seq[2];
++    /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
++    /* see below */
++} POSTPACK;
++
++#define IEEE80211_FC0_VERSION_MASK          0x03
++#define IEEE80211_FC0_VERSION_SHIFT         0
++#define IEEE80211_FC0_VERSION_0             0x00
++#define IEEE80211_FC0_TYPE_MASK             0x0c
++#define IEEE80211_FC0_TYPE_SHIFT            2
++#define IEEE80211_FC0_TYPE_MGT              0x00
++#define IEEE80211_FC0_TYPE_CTL              0x04
++#define IEEE80211_FC0_TYPE_DATA             0x08
++
++#define IEEE80211_FC0_SUBTYPE_MASK          0xf0
++#define IEEE80211_FC0_SUBTYPE_SHIFT         4
++/* for TYPE_MGT */
++#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ     0x00
++#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP    0x10
++#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ   0x20
++#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP  0x30
++#define IEEE80211_FC0_SUBTYPE_PROBE_REQ     0x40
++#define IEEE80211_FC0_SUBTYPE_PROBE_RESP    0x50
++#define IEEE80211_FC0_SUBTYPE_BEACON        0x80
++#define IEEE80211_FC0_SUBTYPE_ATIM          0x90
++#define IEEE80211_FC0_SUBTYPE_DISASSOC      0xa0
++#define IEEE80211_FC0_SUBTYPE_AUTH          0xb0
++#define IEEE80211_FC0_SUBTYPE_DEAUTH        0xc0
++/* for TYPE_CTL */
++#define IEEE80211_FC0_SUBTYPE_PS_POLL       0xa0
++#define IEEE80211_FC0_SUBTYPE_RTS           0xb0
++#define IEEE80211_FC0_SUBTYPE_CTS           0xc0
++#define IEEE80211_FC0_SUBTYPE_ACK           0xd0
++#define IEEE80211_FC0_SUBTYPE_CF_END        0xe0
++#define IEEE80211_FC0_SUBTYPE_CF_END_ACK    0xf0
++/* for TYPE_DATA (bit combination) */
++#define IEEE80211_FC0_SUBTYPE_DATA          0x00
++#define IEEE80211_FC0_SUBTYPE_CF_ACK        0x10
++#define IEEE80211_FC0_SUBTYPE_CF_POLL       0x20
++#define IEEE80211_FC0_SUBTYPE_CF_ACPL       0x30
++#define IEEE80211_FC0_SUBTYPE_NODATA        0x40
++#define IEEE80211_FC0_SUBTYPE_CFACK         0x50
++#define IEEE80211_FC0_SUBTYPE_CFPOLL        0x60
++#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
++#define IEEE80211_FC0_SUBTYPE_QOS           0x80
++#define IEEE80211_FC0_SUBTYPE_QOS_NULL      0xc0
++
++#define IEEE80211_FC1_DIR_MASK              0x03
++#define IEEE80211_FC1_DIR_NODS              0x00    /* STA->STA */
++#define IEEE80211_FC1_DIR_TODS              0x01    /* STA->AP  */
++#define IEEE80211_FC1_DIR_FROMDS            0x02    /* AP ->STA */
++#define IEEE80211_FC1_DIR_DSTODS            0x03    /* AP ->AP  */
++
++#define IEEE80211_FC1_MORE_FRAG             0x04
++#define IEEE80211_FC1_RETRY                 0x08
++#define IEEE80211_FC1_PWR_MGT               0x10
++#define IEEE80211_FC1_MORE_DATA             0x20
++#define IEEE80211_FC1_WEP                   0x40
++#define IEEE80211_FC1_ORDER                 0x80
++
++#define IEEE80211_SEQ_FRAG_MASK             0x000f
++#define IEEE80211_SEQ_FRAG_SHIFT            0
++#define IEEE80211_SEQ_SEQ_MASK              0xfff0
++#define IEEE80211_SEQ_SEQ_SHIFT             4
++
++#define IEEE80211_NWID_LEN                  32
++
++/*
++ * 802.11 rate set.
++ */
++#define IEEE80211_RATE_SIZE     8       /* 802.11 standard */
++#define IEEE80211_RATE_MAXSIZE  15      /* max rates we'll handle */
++
++#define WMM_NUM_AC                  4   /* 4 AC categories */
++
++#define WMM_PARAM_ACI_M         0x60    /* Mask for ACI field */
++#define WMM_PARAM_ACI_S         5   /* Shift for ACI field */
++#define WMM_PARAM_ACM_M         0x10    /* Mask for ACM bit */
++#define WMM_PARAM_ACM_S         4       /* Shift for ACM bit */
++#define WMM_PARAM_AIFSN_M       0x0f    /* Mask for aifsn field */
++#define WMM_PARAM_LOGCWMIN_M    0x0f    /* Mask for CwMin field (in log) */
++#define WMM_PARAM_LOGCWMAX_M    0xf0    /* Mask for CwMax field (in log) */
++#define WMM_PARAM_LOGCWMAX_S    4   /* Shift for CwMax field */
++
++#define WMM_AC_TO_TID(_ac) (       \
++    ((_ac) == WMM_AC_VO) ? 6 : \
++    ((_ac) == WMM_AC_VI) ? 5 : \
++    ((_ac) == WMM_AC_BK) ? 1 : \
++    0)
++
++#define TID_TO_WMM_AC(_tid) (      \
++    ((_tid) < 1) ? WMM_AC_BE : \
++    ((_tid) < 3) ? WMM_AC_BK : \
++    ((_tid) < 6) ? WMM_AC_VI : \
++    WMM_AC_VO)
++/*
++ * Management information element payloads.
++ */
++
++enum {
++    IEEE80211_ELEMID_SSID       = 0,
++    IEEE80211_ELEMID_RATES      = 1,
++    IEEE80211_ELEMID_FHPARMS    = 2,
++    IEEE80211_ELEMID_DSPARMS    = 3,
++    IEEE80211_ELEMID_CFPARMS    = 4,
++    IEEE80211_ELEMID_TIM        = 5,
++    IEEE80211_ELEMID_IBSSPARMS  = 6,
++    IEEE80211_ELEMID_COUNTRY    = 7,
++    IEEE80211_ELEMID_CHALLENGE  = 16,
++    /* 17-31 reserved for challenge text extension */
++    IEEE80211_ELEMID_PWRCNSTR   = 32,
++    IEEE80211_ELEMID_PWRCAP     = 33,
++    IEEE80211_ELEMID_TPCREQ     = 34,
++    IEEE80211_ELEMID_TPCREP     = 35,
++    IEEE80211_ELEMID_SUPPCHAN   = 36,
++    IEEE80211_ELEMID_CHANSWITCH = 37,
++    IEEE80211_ELEMID_MEASREQ    = 38,
++    IEEE80211_ELEMID_MEASREP    = 39,
++    IEEE80211_ELEMID_QUIET      = 40,
++    IEEE80211_ELEMID_IBSSDFS    = 41,
++    IEEE80211_ELEMID_ERP        = 42,
++    IEEE80211_ELEMID_RSN        = 48,
++    IEEE80211_ELEMID_XRATES     = 50,
++    IEEE80211_ELEMID_TPC        = 150,
++    IEEE80211_ELEMID_CCKM       = 156,
++    IEEE80211_ELEMID_VENDOR     = 221,  /* vendor private */
++};
++
++#define ATH_OUI             0x7f0300        /* Atheros OUI */
++#define ATH_OUI_TYPE        0x01
++#define ATH_OUI_SUBTYPE     0x01
++#define ATH_OUI_VERSION     0x00
++
++#define WPA_OUI             0xf25000
++#define WPA_OUI_TYPE        0x01
++#define WPA_VERSION         1          /* current supported version */
++
++#define WPA_CSE_NULL        0x00
++#define WPA_CSE_WEP40       0x01
++#define WPA_CSE_TKIP        0x02
++#define WPA_CSE_CCMP        0x04
++#define WPA_CSE_WEP104      0x05
++
++#define WPA_ASE_NONE        0x00
++#define WPA_ASE_8021X_UNSPEC    0x01
++#define WPA_ASE_8021X_PSK   0x02
++
++#define RSN_OUI         0xac0f00
++#define RSN_VERSION     1       /* current supported version */
++
++#define RSN_CSE_NULL        0x00
++#define RSN_CSE_WEP40       0x01
++#define RSN_CSE_TKIP        0x02
++#define RSN_CSE_WRAP        0x03
++#define RSN_CSE_CCMP        0x04
++#define RSN_CSE_WEP104      0x05
++
++#define RSN_ASE_NONE        0x00
++#define RSN_ASE_8021X_UNSPEC    0x01
++#define RSN_ASE_8021X_PSK   0x02
++
++#define RSN_CAP_PREAUTH     0x01
++
++#define WMM_OUI         0xf25000
++#define WMM_OUI_TYPE        0x02
++#define WMM_INFO_OUI_SUBTYPE    0x00
++#define WMM_PARAM_OUI_SUBTYPE   0x01
++#define WMM_VERSION     1
++
++/* WMM stream classes */
++#define WMM_NUM_AC  4
++#define WMM_AC_BE   0       /* best effort */
++#define WMM_AC_BK   1       /* background */
++#define WMM_AC_VI   2       /* video */
++#define WMM_AC_VO   3       /* voice */
++
++/* TSPEC related */
++#define ACTION_CATEGORY_CODE_TSPEC                 17
++#define ACTION_CODE_TSPEC_ADDTS                    0
++#define ACTION_CODE_TSPEC_ADDTS_RESP               1
++#define ACTION_CODE_TSPEC_DELTS                    2
++
++typedef enum {
++    TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0,
++    TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1,
++    TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3,
++    TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8,
++    TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9,
++    TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA,
++    TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB,
++    TSPEC_STATUS_CODE_DELTS_SENT    = 0x30,
++    TSPEC_STATUS_CODE_DELTS_RECV    = 0x31,
++} TSPEC_STATUS_CODE;
++
++/*
++ * WMM/802.11e Tspec Element
++ */
++typedef PREPACK struct wmm_tspec_ie_t {
++    A_UINT8     elementId;
++    A_UINT8     len;
++    A_UINT8     oui[3];
++    A_UINT8     ouiType;
++    A_UINT8     ouiSubType;
++    A_UINT8     version;
++    A_UINT16    tsInfo_info;
++    A_UINT8     tsInfo_reserved;
++    A_UINT16    nominalMSDU;
++    A_UINT16    maxMSDU;
++    A_UINT32    minServiceInt;
++    A_UINT32    maxServiceInt;
++    A_UINT32    inactivityInt;
++    A_UINT32    suspensionInt;
++    A_UINT32    serviceStartTime;
++    A_UINT32    minDataRate;
++    A_UINT32    meanDataRate;
++    A_UINT32    peakDataRate;
++    A_UINT32    maxBurstSize;
++    A_UINT32    delayBound;
++    A_UINT32    minPhyRate;
++    A_UINT16    sba;
++    A_UINT16    mediumTime;
++} POSTPACK WMM_TSPEC_IE;
++
++
++/*
++ * BEACON management packets
++ *
++ *  octet timestamp[8]
++ *  octet beacon interval[2]
++ *  octet capability information[2]
++ *  information element
++ *      octet elemid
++ *      octet length
++ *      octet information[length]
++ */
++
++#define IEEE80211_BEACON_INTERVAL(beacon) \
++    ((beacon)[8] | ((beacon)[9] << 8))
++#define IEEE80211_BEACON_CAPABILITY(beacon) \
++    ((beacon)[10] | ((beacon)[11] << 8))
++
++#define IEEE80211_CAPINFO_ESS               0x0001
++#define IEEE80211_CAPINFO_IBSS              0x0002
++#define IEEE80211_CAPINFO_CF_POLLABLE       0x0004
++#define IEEE80211_CAPINFO_CF_POLLREQ        0x0008
++#define IEEE80211_CAPINFO_PRIVACY           0x0010
++#define IEEE80211_CAPINFO_SHORT_PREAMBLE    0x0020
++#define IEEE80211_CAPINFO_PBCC              0x0040
++#define IEEE80211_CAPINFO_CHNL_AGILITY      0x0080
++/* bits 8-9 are reserved */
++#define IEEE80211_CAPINFO_SHORT_SLOTTIME    0x0400
++#define IEEE80211_CAPINFO_APSD              0x0800
++/* bit 12 is reserved */
++#define IEEE80211_CAPINFO_DSSSOFDM          0x2000
++/* bits 14-15 are reserved */
++
++/*
++ * Authentication Modes
++ */
++
++enum ieee80211_authmode {
++    IEEE80211_AUTH_NONE     = 0,
++    IEEE80211_AUTH_OPEN     = 1,
++    IEEE80211_AUTH_SHARED   = 2,
++    IEEE80211_AUTH_8021X    = 3,
++    IEEE80211_AUTH_AUTO     = 4,   /* auto-select/accept */
++    /* NB: these are used only for ioctls */
++    IEEE80211_AUTH_WPA      = 5,  /* WPA/RSN  w/ 802.1x */
++    IEEE80211_AUTH_WPA_PSK  = 6,  /* WPA/RSN  w/ PSK */
++    IEEE80211_AUTH_WPA_CCKM = 7,  /* WPA/RSN IE  w/ CCKM */
++};
++
++#include "athendpack.h"
++
++#endif /* _NET80211_IEEE80211_H_ */
+diff --git a/drivers/ar6000/include/ieee80211_ioctl.h b/drivers/ar6000/include/ieee80211_ioctl.h
+new file mode 100644
+index 0000000..dab6747
+--- /dev/null
++++ b/drivers/ar6000/include/ieee80211_ioctl.h
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
++ */
++
++#ifndef _IEEE80211_IOCTL_H_
++#define _IEEE80211_IOCTL_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
++ */
++
++/*
++ * WPA/RSN get/set key request.  Specify the key/cipher
++ * type and whether the key is to be used for sending and/or
++ * receiving.  The key index should be set only when working
++ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
++ * Otherwise a unicast/pairwise key is specified by the bssid
++ * (on a station) or mac address (on an ap).  They key length
++ * must include any MIC key data; otherwise it should be no
++ more than IEEE80211_KEYBUF_SIZE.
++ */
++struct ieee80211req_key {
++	u_int8_t	ik_type;	/* key/cipher type */
++	u_int8_t	ik_pad;
++	u_int16_t	ik_keyix;	/* key index */
++	u_int8_t	ik_keylen;	/* key length in bytes */
++	u_int8_t	ik_flags;
++#define IEEE80211_KEY_XMIT  0x01
++#define IEEE80211_KEY_RECV  0x02
++#define	IEEE80211_KEY_DEFAULT	0x80	/* default xmit key */
++	u_int8_t	ik_macaddr[IEEE80211_ADDR_LEN];
++	u_int64_t	ik_keyrsc;	/* key receive sequence counter */
++	u_int64_t	ik_keytsc;	/* key transmit sequence counter */
++	u_int8_t	ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
++};
++/*
++ * Delete a key either by index or address.  Set the index
++ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
++ */
++struct ieee80211req_del_key {
++	u_int8_t	idk_keyix;	/* key index */
++	u_int8_t	idk_macaddr[IEEE80211_ADDR_LEN];
++};
++/*
++ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
++ * only makes sense when operating as a station.  The other
++ * requests can be used when operating as a station or an
++ * ap (to effect a station).
++ */
++struct ieee80211req_mlme {
++	u_int8_t	im_op;		/* operation to perform */
++#define	IEEE80211_MLME_ASSOC		1	/* associate station */
++#define	IEEE80211_MLME_DISASSOC		2	/* disassociate station */
++#define	IEEE80211_MLME_DEAUTH		3	/* deauthenticate station */
++#define	IEEE80211_MLME_AUTHORIZE	4	/* authorize station */
++#define	IEEE80211_MLME_UNAUTHORIZE	5	/* unauthorize station */
++	u_int16_t	im_reason;	/* 802.11 reason code */
++	u_int8_t	im_macaddr[IEEE80211_ADDR_LEN];
++};
++
++struct ieee80211req_addpmkid {
++    u_int8_t    pi_bssid[IEEE80211_ADDR_LEN];
++    u_int8_t    pi_enable;
++    u_int8_t    pi_pmkid[16];
++};
++
++#define AUTH_ALG_OPEN_SYSTEM	0x01
++#define AUTH_ALG_SHARED_KEY	0x02
++#define AUTH_ALG_LEAP		0x04
++
++struct ieee80211req_authalg {
++   u_int8_t auth_alg;
++};
++
++/*
++ * Request to add an IE to a Management Frame
++ */
++enum{
++    IEEE80211_APPIE_FRAME_BEACON     = 0,
++    IEEE80211_APPIE_FRAME_PROBE_REQ  = 1,
++    IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
++    IEEE80211_APPIE_FRAME_ASSOC_REQ  = 3,
++    IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
++    IEEE80211_APPIE_NUM_OF_FRAME     = 5
++};
++
++/*
++ * The Maximum length of the IE that can be added to a Management frame
++ */
++#define IEEE80211_APPIE_FRAME_MAX_LEN  78
++
++struct ieee80211req_getset_appiebuf {
++    u_int32_t app_frmtype; /* management frame type for which buffer is added */
++    u_int32_t app_buflen;  /*application supplied buffer length */
++    u_int8_t  app_buf[];
++};
++
++/*
++ * The following definitions are used by an application to set filter
++ * for receiving management frames
++ */
++enum {
++     IEEE80211_FILTER_TYPE_BEACON      =   0x1,
++     IEEE80211_FILTER_TYPE_PROBE_REQ   =   0x2,
++     IEEE80211_FILTER_TYPE_PROBE_RESP  =   0x4,
++     IEEE80211_FILTER_TYPE_ASSOC_REQ   =   0x8,
++     IEEE80211_FILTER_TYPE_ASSOC_RESP  =   0x10,
++     IEEE80211_FILTER_TYPE_AUTH        =   0x20,
++     IEEE80211_FILTER_TYPE_DEAUTH      =   0x40,
++     IEEE80211_FILTER_TYPE_DISASSOC    =   0x80,
++     IEEE80211_FILTER_TYPE_ALL         =   0xFF  /* used to check the valid filter bits */
++};
++
++struct ieee80211req_set_filter {
++      u_int32_t app_filterype; /* management frame filter type */
++};
++
++enum {
++    IEEE80211_PARAM_AUTHMODE = 3,   /* Authentication Mode */
++    IEEE80211_PARAM_MCASTCIPHER = 5,
++    IEEE80211_PARAM_MCASTKEYLEN = 6,    /* multicast key length */
++    IEEE80211_PARAM_UCASTCIPHER = 8,
++    IEEE80211_PARAM_UCASTKEYLEN = 9,    /* unicast key length */
++	IEEE80211_PARAM_WPA		= 10,	/* WPA mode (0,1,2) */
++	IEEE80211_PARAM_ROAMING		= 12,	/* roaming mode */
++	IEEE80211_PARAM_PRIVACY		= 13,	/* privacy invoked */
++	IEEE80211_PARAM_COUNTERMEASURES	= 14,	/* WPA/TKIP countermeasures */
++	IEEE80211_PARAM_DROPUNENCRYPTED	= 15,	/* discard unencrypted frames */
++};
++
++/*
++ * Values for IEEE80211_PARAM_WPA
++ */
++#define WPA_MODE_WPA1   1
++#define WPA_MODE_WPA2   2
++#define WPA_MODE_AUTO   3
++#define WPA_MODE_NONE   4
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _IEEE80211_IOCTL_H_ */
+diff --git a/drivers/ar6000/include/ieee80211_node.h b/drivers/ar6000/include/ieee80211_node.h
+new file mode 100644
+index 0000000..46b613c
+--- /dev/null
++++ b/drivers/ar6000/include/ieee80211_node.h
+@@ -0,0 +1,77 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2006 Atheros Communications, Inc.
++ *
++ * Wireless Network driver for Atheros AR6001
++ * All rights reserved.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ */
++#ifndef _IEEE80211_NODE_H_
++#define _IEEE80211_NODE_H_
++
++/*
++ * Node locking definitions.
++ */
++#define IEEE80211_NODE_LOCK_INIT(_nt)   A_MUTEX_INIT(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_DESTROY(_nt)
++#define IEEE80211_NODE_LOCK(_nt)        A_MUTEX_LOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_UNLOCK(_nt)      A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_BH(_nt)     A_MUTEX_LOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_UNLOCK_BH(_nt)   A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_ASSERT(_nt)
++
++/*
++ * Node reference counting definitions.
++ *
++ * ieee80211_node_initref   initialize the reference count to 1
++ * ieee80211_node_incref    add a reference
++ * ieee80211_node_decref    remove a reference
++ * ieee80211_node_dectestref    remove a reference and return 1 if this
++ *              is the last reference, otherwise 0
++ * ieee80211_node_refcnt    reference count for printing (only)
++ */
++#define ieee80211_node_initref(_ni)     ((_ni)->ni_refcnt = 1)
++#define ieee80211_node_incref(_ni)      ((_ni)->ni_refcnt++)
++#define ieee80211_node_decref(_ni)      ((_ni)->ni_refcnt--)
++#define ieee80211_node_dectestref(_ni)  (((_ni)->ni_refcnt--) == 0)
++#define ieee80211_node_refcnt(_ni)      ((_ni)->ni_refcnt)
++
++#define IEEE80211_NODE_HASHSIZE 32
++/* simple hash is enough for variation of macaddr */
++#define IEEE80211_NODE_HASH(addr)   \
++    (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \
++        IEEE80211_NODE_HASHSIZE)
++
++/*
++ * Table of ieee80211_node instances.  Each ieee80211com
++ * has at least one for holding the scan candidates.
++ * When operating as an access point or in ibss mode there
++ * is a second table for associated stations or neighbors.
++ */
++struct ieee80211_node_table {
++    void                   *nt_wmip;       /* back reference */
++    A_MUTEX_T               nt_nodelock;    /* on node table */
++    struct bss              *nt_node_first; /* information of all nodes */
++    struct bss              *nt_node_last;  /* information of all nodes */
++    struct bss              *nt_hash[IEEE80211_NODE_HASHSIZE];
++    const char              *nt_name;   /* for debugging */
++    A_UINT32                nt_scangen; /* gen# for timeout scan */
++    A_TIMER                 nt_inact_timer;
++    A_UINT8                 isTimerArmed;   /* is the node timer armed */
++};
++
++#define WLAN_NODE_INACT_TIMEOUT_MSEC            10000
++
++#endif /* _IEEE80211_NODE_H_ */
+diff --git a/drivers/ar6000/include/ini_dset.h b/drivers/ar6000/include/ini_dset.h
+new file mode 100644
+index 0000000..410f2b52
+--- /dev/null
++++ b/drivers/ar6000/include/ini_dset.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++#ifndef _INI_DSET_H_
++#define _INI_DSET_H_
++
++/*
++ * Each of these represents a WHAL INI table, which consists
++ * of an "address column" followed by 1 or more "value columns".
++ *
++ * Software uses the base WHAL_INI_DATA_ID+column to access a
++ * DataSet that holds a particular column of data.
++ */
++typedef enum {
++    WHAL_INI_DATA_ID_NULL               =0,
++    WHAL_INI_DATA_ID_MODE_SPECIFIC      =1,  /* 2,3 */
++    WHAL_INI_DATA_ID_COMMON             =4,  /* 5 */
++    WHAL_INI_DATA_ID_BB_RFGAIN          =6,  /* 7,8 */
++    WHAL_INI_DATA_ID_ANALOG_BANK1       =9,  /* 10 */
++    WHAL_INI_DATA_ID_ANALOG_BANK2       =11, /* 12 */
++    WHAL_INI_DATA_ID_ANALOG_BANK3       =13, /* 14, 15 */
++    WHAL_INI_DATA_ID_ANALOG_BANK6       =16, /* 17, 18 */
++    WHAL_INI_DATA_ID_ANALOG_BANK7       =19, /* 20 */
++    WHAL_INI_DATA_ID_MODE_OVERRIDES     =21, /* 22,23 */
++    WHAL_INI_DATA_ID_COMMON_OVERRIDES   =24, /* 25 */
++
++    WHAL_INI_DATA_ID_MAX                =25
++} WHAL_INI_DATA_ID;
++
++typedef PREPACK struct {
++    A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common
++    A_UINT16 offset;
++    A_UINT32 newValue;
++} POSTPACK INI_DSET_REG_OVERRIDE;
++
++#endif
+diff --git a/drivers/ar6000/include/regDb.h b/drivers/ar6000/include/regDb.h
+new file mode 100644
+index 0000000..b3f665f
+--- /dev/null
++++ b/drivers/ar6000/include/regDb.h
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (c) 2005 Atheros Communications, Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This module contains the header files for regulatory module,
++ * which include the DB schema and DB values.
++ * $Id:
++ */
++
++#ifndef __REG_DB_H__
++#define __REG_DB_H__
++
++#include "./regulatory/reg_dbschema.h"
++#include "./regulatory/reg_dbvalues.h"
++
++#endif  /* __REG_DB_H__ */
+diff --git a/drivers/ar6000/include/regdump.h b/drivers/ar6000/include/regdump.h
+new file mode 100644
+index 0000000..0106825
+--- /dev/null
++++ b/drivers/ar6000/include/regdump.h
+@@ -0,0 +1,33 @@
++#ifndef __REGDUMP_H__
++#define __REGDUMP_H__
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++#if defined(AR6001)
++#include "AR6001/AR6001_regdump.h"
++#endif
++#if defined(AR6002)
++#include "AR6002/AR6002_regdump.h"
++#endif
++
++#if !defined(__ASSEMBLER__)
++/*
++ * Target CPU state at the time of failure is reflected
++ * in a register dump, which the Host can fetch through
++ * the diagnostic window.
++ */
++struct register_dump_s {
++    A_UINT32 target_id;               /* Target ID */
++    A_UINT32 assline;                 /* Line number (if assertion failure) */
++    A_UINT32 pc;                      /* Program Counter at time of exception */
++    A_UINT32 badvaddr;                /* Virtual address causing exception */
++    CPU_exception_frame_t exc_frame;  /* CPU-specific exception info */
++
++    /* Could copy top of stack here, too.... */
++};
++#endif /* __ASSEMBLER__ */
++#endif /* __REGDUMP_H__ */
+diff --git a/drivers/ar6000/include/targaddrs.h b/drivers/ar6000/include/targaddrs.h
+new file mode 100644
+index 0000000..da2a650
+--- /dev/null
++++ b/drivers/ar6000/include/targaddrs.h
+@@ -0,0 +1,158 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __TARGADDRS_H__
++#define __TARGADDRS_H__
++#if defined(AR6001)
++#include "AR6001/addrs.h"
++#endif
++#if defined(AR6002)
++#include "AR6002/addrs.h"
++#endif
++
++/*
++ * AR6K option bits, to enable/disable various features.
++ * By default, all option bits are 0.
++ * These bits can be set in LOCAL_SCRATCH register 0.
++ */
++#define AR6K_OPTION_BMI_DISABLE      0x01 /* Disable BMI comm with Host */
++#define AR6K_OPTION_SERIAL_ENABLE    0x02 /* Enable serial port msgs */
++#define AR6K_OPTION_WDT_DISABLE      0x04 /* WatchDog Timer override */
++#define AR6K_OPTION_SLEEP_DISABLE    0x08 /* Disable system sleep */
++#define AR6K_OPTION_STOP_BOOT        0x10 /* Stop boot processes (for ATE) */
++#define AR6K_OPTION_ENABLE_NOANI     0x20 /* Operate without ANI */
++#define AR6K_OPTION_DSET_DISABLE     0x40 /* Ignore DataSets */
++#define AR6K_OPTION_IGNORE_FLASH     0x80 /* Ignore flash during bootup */
++
++/*
++ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
++ * host_interest structure.  It must match the address of the _host_interest
++ * symbol (see linker script).
++ *
++ * Host Interest is shared between Host and Target in order to coordinate
++ * between the two, and is intended to remain constant (with additions only
++ * at the end) across software releases.
++ */
++#define AR6001_HOST_INTEREST_ADDRESS     0x80000600
++#define AR6002_HOST_INTEREST_ADDRESS     0x00500400
++
++#define HOST_INTEREST_MAX_SIZE          0x100
++
++#if !defined(__ASSEMBLER__)
++struct register_dump_s;
++struct dbglog_hdr_s;
++
++/*
++ * These are items that the Host may need to access
++ * via BMI or via the Diagnostic Window. The position
++ * of items in this structure must remain constant
++ * across firmware revisions!
++ *
++ * Types for each item must be fixed size across
++ * target and host platforms.
++ *
++ * More items may be added at the end.
++ */
++struct host_interest_s {
++    /*
++     * Pointer to application-defined area, if any.
++     * Set by Target application during startup.
++     */
++    A_UINT32               hi_app_host_interest;                      /* 0x00 */
++
++    /* Pointer to register dump area, valid after Target crash. */
++    A_UINT32               hi_failure_state;                          /* 0x04 */
++
++    /* Pointer to debug logging header */
++    A_UINT32               hi_dbglog_hdr;                             /* 0x08 */
++
++    /* Indicates whether or not flash is present on Target.
++     * NB: flash_is_present indicator is here not just
++     * because it might be of interest to the Host; but
++     * also because it's set early on by Target's startup
++     * asm code and we need it to have a special RAM address
++     * so that it doesn't get reinitialized with the rest
++     * of data.
++     */
++    A_UINT32               hi_flash_is_present;                       /* 0x0c */
++
++    /*
++     * General-purpose flag bits, similar to AR6000_OPTION_* flags.
++     * Can be used by application rather than by OS.
++     */
++    A_UINT32               hi_option_flag;                            /* 0x10 */
++
++    /*
++     * Boolean that determines whether or not to
++     * display messages on the serial port.
++     */
++    A_UINT32               hi_serial_enable;                          /* 0x14 */
++
++    /* Start address of Flash DataSet index, if any */
++    A_UINT32               hi_dset_list_head;                         /* 0x18 */
++
++    /* Override Target application start address */
++    A_UINT32               hi_app_start;                              /* 0x1c */
++
++    /* Clock and voltage tuning */
++    A_UINT32               hi_skip_clock_init;                        /* 0x20 */
++    A_UINT32               hi_core_clock_setting;                     /* 0x24 */
++    A_UINT32               hi_cpu_clock_setting;                      /* 0x28 */
++    A_UINT32               hi_system_sleep_setting;                   /* 0x2c */
++    A_UINT32               hi_xtal_control_setting;                   /* 0x30 */
++    A_UINT32               hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
++    A_UINT32               hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
++    A_UINT32               hi_ref_voltage_trim_setting;               /* 0x3c */
++    A_UINT32               hi_clock_info;                             /* 0x40 */
++
++    /*
++     * Flash configuration overrides, used only
++     * when firmware is not executing from flash.
++     * (When using flash, modify the global variables
++     * with equivalent names.)
++     */
++    A_UINT32               hi_bank0_addr_value;                       /* 0x44 */
++    A_UINT32               hi_bank0_read_value;                       /* 0x48 */
++    A_UINT32               hi_bank0_write_value;                      /* 0x4c */
++    A_UINT32               hi_bank0_config_value;                     /* 0x50 */
++
++    /* Pointer to Board Data  */
++    A_UINT32               hi_board_data;                             /* 0x54 */
++    A_UINT32               hi_board_data_initialized;                 /* 0x58 */
++
++    A_UINT32               hi_dset_RAM_index_table;                   /* 0x5c */
++
++    A_UINT32               hi_desired_baud_rate;                      /* 0x60 */
++    A_UINT32               hi_dbglog_config;                          /* 0x64 */
++    A_UINT32               hi_end_RAM_reserve_sz;                     /* 0x68 */
++    A_UINT32               hi_mbox_io_block_sz;                       /* 0x6c */
++
++    A_UINT32               hi_num_bpatch_streams;                     /* 0x70 */
++    A_UINT32               hi_mbox_isr_yield_limit;                   /* 0x74 */
++
++    A_UINT32               hi_refclk_hz;                              /* 0x78 */
++};
++
++/* Bits defined in hi_option_flag */
++#define HI_OPTION_TIMER_WAR     1 /* not really used */
++
++/*
++ * Intended for use by Host software, this macro returns the Target RAM
++ * address of any item in the host_interest structure.
++ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
++ */
++#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
++    ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
++
++#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
++    ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
++
++
++#endif /* !__ASSEMBLER__ */
++
++#endif /* __TARGADDRS_H__ */
+diff --git a/drivers/ar6000/include/testcmd.h b/drivers/ar6000/include/testcmd.h
+new file mode 100644
+index 0000000..737533a
+--- /dev/null
++++ b/drivers/ar6000/include/testcmd.h
+@@ -0,0 +1,144 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef  TESTCMD_H_
++#define  TESTCMD_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef enum {
++    ZEROES_PATTERN = 0,
++    ONES_PATTERN,
++    REPEATING_10,
++    PN7_PATTERN,
++    PN9_PATTERN,
++    PN15_PATTERN
++}TX_DATA_PATTERN;
++
++/* Continous tx
++   mode : TCMD_CONT_TX_OFF - Disabling continous tx
++          TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
++          TCMD_CONT_TX_FRAME- Enable continuous modulated tx
++   freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
++dataRate: 0 - 1 Mbps
++          1 - 2 Mbps
++          2 - 5.5 Mbps
++          3 - 11 Mbps
++          4 - 6 Mbps
++          5 - 9 Mbps
++          6 - 12 Mbps
++          7 - 18 Mbps
++          8 - 24 Mbps
++          9 - 36 Mbps
++         10 - 28 Mbps
++         11 - 54 Mbps
++  txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx
++antenna:  1 - one antenna
++          2 - two antenna
++Note : Enable/disable continuous tx test cmd works only when target is awake.
++*/
++
++typedef enum {
++    TCMD_CONT_TX_OFF = 0,
++    TCMD_CONT_TX_SINE,
++    TCMD_CONT_TX_FRAME,
++    TCMD_CONT_TX_TX99,
++    TCMD_CONT_TX_TX100
++} TCMD_CONT_TX_MODE;
++
++typedef PREPACK struct {
++    A_UINT32                 testCmdId;
++    A_UINT32                mode;
++    A_UINT32                freq;
++    A_UINT32                dataRate;
++    A_INT32                 txPwr;
++    A_UINT32                antenna;
++    A_UINT32                enANI;
++    A_UINT32                scramblerOff;
++    A_UINT32                aifsn;
++    A_UINT16                pktSz;
++    A_UINT16                txPattern;
++} POSTPACK TCMD_CONT_TX;
++
++#define TCMD_TXPATTERN_ZERONE                 0x1
++#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE    0x2
++
++/* Continuous Rx
++ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames)
++      TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest
++                                             address equal specified
++                                             mac address (set via act =3)
++      TCMD_CONT_RX_REPORT  off mode  (disable cont rx mode and get the
++                                          report from the last cont
++                                          Rx test)
++
++     TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the
++                                                 target. This Overrides
++                                                 the default MAC address.)
++
++*/
++typedef enum {
++    TCMD_CONT_RX_PROMIS =0,
++    TCMD_CONT_RX_FILTER,
++    TCMD_CONT_RX_REPORT,
++    TCMD_CONT_RX_SETMAC
++} TCMD_CONT_RX_ACT;
++
++typedef PREPACK struct {
++    A_UINT32         testCmdId;
++    A_UINT32        act;
++    A_UINT32        enANI;
++    PREPACK union {
++        struct PREPACK TCMD_CONT_RX_PARA {
++            A_UINT32    freq;
++            A_UINT32    antenna;
++        } POSTPACK para;
++        struct PREPACK TCMD_CONT_RX_REPORT {
++            A_UINT32    totalPkt;
++            A_INT32    rssiInDBm;
++        } POSTPACK report;
++        struct PREPACK TCMD_CONT_RX_MAC {
++            A_UCHAR    addr[ATH_MAC_LEN];
++        } POSTPACK mac;
++    } POSTPACK u;
++} POSTPACK TCMD_CONT_RX;
++
++/* Force sleep/wake  test cmd
++ mode: TCMD_PM_WAKEUP - Wakeup the target
++       TCMD_PM_SLEEP - Force the target to sleep.
++ */
++typedef enum {
++    TCMD_PM_WAKEUP = 1, /* be consistent with target */
++    TCMD_PM_SLEEP
++} TCMD_PM_MODE;
++
++typedef PREPACK struct {
++	A_UINT32  testCmdId;
++    A_UINT32  mode;
++} POSTPACK TCMD_PM;
++
++typedef enum{
++    TCMD_CONT_TX_ID,
++    TCMD_CONT_RX_ID,
++    TCMD_PM_ID
++   } TCMD_ID;
++
++typedef PREPACK union {
++          TCMD_CONT_TX contTx;
++          TCMD_CONT_RX contRx;
++          TCMD_PM pm ;
++} POSTPACK TEST_CMD;
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* TESTCMD_H_ */
+diff --git a/drivers/ar6000/include/wlan_api.h b/drivers/ar6000/include/wlan_api.h
+new file mode 100644
+index 0000000..aabca4b
+--- /dev/null
++++ b/drivers/ar6000/include/wlan_api.h
+@@ -0,0 +1,101 @@
++#ifndef _HOST_WLAN_API_H_
++#define _HOST_WLAN_API_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the API for the host wlan module
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct ieee80211_node_table;
++struct ieee80211_frame;
++
++struct ieee80211_common_ie {
++    A_UINT16    ie_chan;
++    A_UINT8     *ie_tstamp;
++    A_UINT8     *ie_ssid;
++    A_UINT8     *ie_rates;
++    A_UINT8     *ie_xrates;
++    A_UINT8     *ie_country;
++    A_UINT8     *ie_wpa;
++    A_UINT8     *ie_rsn;
++    A_UINT8     *ie_wmm;
++    A_UINT8     *ie_ath;
++    A_UINT16    ie_capInfo;
++    A_UINT16    ie_beaconInt;
++    A_UINT8     *ie_tim;
++    A_UINT8     *ie_chswitch;
++    A_UINT8     ie_erp;
++    A_UINT8     *ie_wsc;
++};
++
++typedef struct bss {
++    A_UINT8                      ni_macaddr[6];
++    A_UINT8                      ni_snr;
++    A_INT16                      ni_rssi;
++    struct bss                   *ni_list_next;
++    struct bss                   *ni_list_prev;
++    struct bss                   *ni_hash_next;
++    struct bss                   *ni_hash_prev;
++    struct ieee80211_common_ie   ni_cie;
++    A_UINT8                     *ni_buf;
++    struct ieee80211_node_table *ni_table;
++    A_UINT32                     ni_refcnt;
++    int                          ni_scangen;
++    A_UINT32                     ni_tstamp;
++} bss_t;
++
++typedef void wlan_node_iter_func(void *arg, bss_t *);
++
++bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size);
++void wlan_node_free(bss_t *ni);
++void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
++                const A_UINT8 *macaddr);
++bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr);
++void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni);
++void wlan_free_allnodes(struct ieee80211_node_table *nt);
++void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
++                        void *arg);
++
++void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt);
++void wlan_node_table_reset(struct ieee80211_node_table *nt);
++void wlan_node_table_cleanup(struct ieee80211_node_table *nt);
++
++A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen,
++                           struct ieee80211_common_ie *cie);
++
++A_UINT16 wlan_ieee2freq(int chan);
++A_UINT32 wlan_freq2ieee(A_UINT16 freq);
++
++
++bss_t *
++wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
++					A_UINT32 ssidLength, A_BOOL bIsWPA2);
++
++void
++wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HOST_WLAN_API_H_ */
+diff --git a/drivers/ar6000/include/wlan_dset.h b/drivers/ar6000/include/wlan_dset.h
+new file mode 100644
+index 0000000..8a876d6
+--- /dev/null
++++ b/drivers/ar6000/include/wlan_dset.h
+@@ -0,0 +1,20 @@
++/*
++ * Copyright (c) 2007 Atheros Communications, Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __WLAN_DSET_H__
++#define __WKAN_DSET_H__
++
++typedef PREPACK struct wow_config_dset {
++
++    A_UINT8 valid_dset;
++    A_UINT8 gpio_enable;
++    A_UINT16 gpio_pin;
++} POSTPACK WOW_CONFIG_DSET;
++
++#endif
+diff --git a/drivers/ar6000/include/wmi.h b/drivers/ar6000/include/wmi.h
+new file mode 100644
+index 0000000..045acd4
+--- /dev/null
++++ b/drivers/ar6000/include/wmi.h
+@@ -0,0 +1,1743 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions of the WMI protocol specified in the
++ * Wireless Module Interface (WMI).  It includes definitions of all the
++ * commands and events. Commands are messages from the host to the WM.
++ * Events and Replies are messages from the WM to the host.
++ *
++ * Ownership of correctness in regards to WMI commands
++ * belongs to the host driver and the WM is not required to validate
++ * parameters for value, proper range, or any other checking.
++ *
++ */
++
++#ifndef _WMI_H_
++#define _WMI_H_
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#include "wmix.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define WMI_PROTOCOL_VERSION    0x0002
++#define WMI_PROTOCOL_REVISION   0x0000
++
++#define ATH_MAC_LEN             6               /* length of mac in bytes */
++#define WMI_CMD_MAX_LEN         100
++#define WMI_CONTROL_MSG_MAX_LEN     256
++#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
++#define IS_ETHERTYPE(_typeOrLen)        ((_typeOrLen) >= 0x0600)
++#define RFC1042OUI      {0x00, 0x00, 0x00}
++
++#define IP_ETHERTYPE 0x0800
++
++#define WMI_IMPLICIT_PSTREAM 0xFF
++#define WMI_MAX_THINSTREAM 15
++
++struct host_app_area_s {
++    A_UINT32 wmi_protocol_ver;
++};
++
++/*
++ * Data Path
++ */
++typedef PREPACK struct {
++    A_UINT8     dstMac[ATH_MAC_LEN];
++    A_UINT8     srcMac[ATH_MAC_LEN];
++    A_UINT16    typeOrLen;
++} POSTPACK ATH_MAC_HDR;
++
++typedef PREPACK struct {
++    A_UINT8     dsap;
++    A_UINT8     ssap;
++    A_UINT8     cntl;
++    A_UINT8     orgCode[3];
++    A_UINT16    etherType;
++} POSTPACK ATH_LLC_SNAP_HDR;
++
++typedef enum {
++    DATA_MSGTYPE = 0x0,
++    CNTL_MSGTYPE,
++    SYNC_MSGTYPE
++} WMI_MSG_TYPE;
++
++
++typedef PREPACK struct {
++    A_INT8      rssi;
++    A_UINT8     info;            /* WMI_MSG_TYPE in lower 2 bits - b1b0 */
++                                 /* UP in next 3 bits - b4b3b2 */
++#define WMI_DATA_HDR_MSG_TYPE_MASK  0x03
++#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
++#define WMI_DATA_HDR_UP_MASK        0x07
++#define WMI_DATA_HDR_UP_SHIFT       2
++#define WMI_DATA_HDR_IS_MSG_TYPE(h, t)  (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
++} POSTPACK WMI_DATA_HDR;
++
++
++#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
++#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
++
++/*
++ * Control Path
++ */
++typedef PREPACK struct {
++    A_UINT16    commandId;
++} POSTPACK WMI_CMD_HDR;        /* used for commands and events */
++
++/*
++ * List of Commnands
++ */
++typedef enum {
++    WMI_CONNECT_CMDID           = 0x0001,
++    WMI_RECONNECT_CMDID,
++    WMI_DISCONNECT_CMDID,
++    WMI_SYNCHRONIZE_CMDID,
++    WMI_CREATE_PSTREAM_CMDID,
++    WMI_DELETE_PSTREAM_CMDID,
++    WMI_START_SCAN_CMDID,
++    WMI_SET_SCAN_PARAMS_CMDID,
++    WMI_SET_BSS_FILTER_CMDID,
++    WMI_SET_PROBED_SSID_CMDID,
++    WMI_SET_LISTEN_INT_CMDID,
++    WMI_SET_BMISS_TIME_CMDID,
++    WMI_SET_DISC_TIMEOUT_CMDID,
++    WMI_GET_CHANNEL_LIST_CMDID,
++    WMI_SET_BEACON_INT_CMDID,
++    WMI_GET_STATISTICS_CMDID,
++    WMI_SET_CHANNEL_PARAMS_CMDID,
++    WMI_SET_POWER_MODE_CMDID,
++    WMI_SET_IBSS_PM_CAPS_CMDID,
++    WMI_SET_POWER_PARAMS_CMDID,
++    WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
++    WMI_ADD_CIPHER_KEY_CMDID,
++    WMI_DELETE_CIPHER_KEY_CMDID,
++    WMI_ADD_KRK_CMDID,
++    WMI_DELETE_KRK_CMDID,
++    WMI_SET_PMKID_CMDID,
++    WMI_SET_TX_PWR_CMDID,
++    WMI_GET_TX_PWR_CMDID,
++    WMI_SET_ASSOC_INFO_CMDID,
++    WMI_ADD_BAD_AP_CMDID,
++    WMI_DELETE_BAD_AP_CMDID,
++    WMI_SET_TKIP_COUNTERMEASURES_CMDID,
++    WMI_RSSI_THRESHOLD_PARAMS_CMDID,
++    WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
++    WMI_SET_ACCESS_PARAMS_CMDID,
++    WMI_SET_RETRY_LIMITS_CMDID,
++    WMI_SET_OPT_MODE_CMDID,
++    WMI_OPT_TX_FRAME_CMDID,
++    WMI_SET_VOICE_PKT_SIZE_CMDID,
++    WMI_SET_MAX_SP_LEN_CMDID,
++    WMI_SET_ROAM_CTRL_CMDID,
++    WMI_GET_ROAM_TBL_CMDID,
++    WMI_GET_ROAM_DATA_CMDID,
++    WMI_ENABLE_RM_CMDID,
++    WMI_SET_MAX_OFFHOME_DURATION_CMDID,
++    WMI_EXTENSION_CMDID,                        /* Non-wireless extensions */
++    WMI_SNR_THRESHOLD_PARAMS_CMDID,
++    WMI_LQ_THRESHOLD_PARAMS_CMDID,
++    WMI_SET_LPREAMBLE_CMDID,
++    WMI_SET_RTS_CMDID,
++    WMI_CLR_RSSI_SNR_CMDID,
++    WMI_SET_FIXRATES_CMDID,
++    WMI_GET_FIXRATES_CMDID,
++    WMI_SET_AUTH_MODE_CMDID,
++    WMI_SET_REASSOC_MODE_CMDID,
++    WMI_SET_WMM_CMDID,
++    WMI_SET_WMM_TXOP_CMDID,
++    WMI_TEST_CMDID,
++    WMI_SET_BT_STATUS_CMDID,
++    WMI_SET_BT_PARAMS_CMDID,
++
++    WMI_SET_KEEPALIVE_CMDID,
++    WMI_GET_KEEPALIVE_CMDID,
++    WMI_SET_APPIE_CMDID,
++    WMI_GET_APPIE_CMDID,
++    WMI_SET_WSC_STATUS_CMDID,
++
++    /* Wake on Wireless */
++    WMI_SET_HOST_SLEEP_MODE_CMDID,
++    WMI_SET_WOW_MODE_CMDID,
++    WMI_GET_WOW_LIST_CMDID,
++    WMI_ADD_WOW_PATTERN_CMDID,
++    WMI_DEL_WOW_PATTERN_CMDID,
++    WMI_SET_MAC_ADDRESS_CMDID,
++    WMI_SET_AKMP_PARAMS_CMDID,
++    WMI_SET_PMKID_LIST_CMDID,
++    WMI_GET_PMKID_LIST_CMDID,
++
++    /*
++     * Developer commands starts at 0xF000
++     */
++    WMI_SET_BITRATE_CMDID = 0xF000,
++    WMI_GET_BITRATE_CMDID,
++    WMI_SET_WHALPARAM_CMDID,
++
++} WMI_COMMAND_ID;
++
++/*
++ * Frame Types
++ */
++typedef enum {
++    WMI_FRAME_BEACON        =   0,
++    WMI_FRAME_PROBE_REQ,
++    WMI_FRAME_PROBE_RESP,
++    WMI_FRAME_ASSOC_REQ,
++    WMI_FRAME_ASSOC_RESP,
++    WMI_NUM_MGMT_FRAME
++} WMI_MGMT_FRAME_TYPE;
++
++/*
++ * Connect Command
++ */
++typedef enum {
++    INFRA_NETWORK       = 0x01,
++    ADHOC_NETWORK       = 0x02,
++    ADHOC_CREATOR       = 0x04,
++} NETWORK_TYPE;
++
++typedef enum {
++    OPEN_AUTH           = 0x01,
++    SHARED_AUTH         = 0x02,
++    LEAP_AUTH           = 0x04,  /* different from IEEE_AUTH_MODE definitions */
++} DOT11_AUTH_MODE;
++
++typedef enum {
++    NONE_AUTH           = 0x01,
++    WPA_AUTH            = 0x02,
++    WPA_PSK_AUTH        = 0x03,
++    WPA2_AUTH           = 0x04,
++    WPA2_PSK_AUTH       = 0x05,
++    WPA_AUTH_CCKM       = 0x06,
++    WPA2_AUTH_CCKM      = 0x07,
++} AUTH_MODE;
++
++typedef enum {
++    NONE_CRYPT          = 0x01,
++    WEP_CRYPT           = 0x02,
++    TKIP_CRYPT          = 0x03,
++    AES_CRYPT           = 0x04,
++} CRYPTO_TYPE;
++
++#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
++#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
++
++#define WMI_MIN_KEY_INDEX   0
++#define WMI_MAX_KEY_INDEX   3
++
++#define WMI_MAX_KEY_LEN     32
++
++#define WMI_MAX_SSID_LEN    32
++
++typedef enum {
++    CONNECT_ASSOC_POLICY_USER = 0x0001,
++    CONNECT_SEND_REASSOC = 0x0002,
++    CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
++    CONNECT_PROFILE_MATCH_DONE = 0x0008,
++    CONNECT_IGNORE_AAC_BEACON = 0x0010,
++    CONNECT_CSA_FOLLOW_BSS = 0x0020,
++} WMI_CONNECT_CTRL_FLAGS_BITS;
++
++#define DEFAULT_CONNECT_CTRL_FLAGS         (CONNECT_CSA_FOLLOW_BSS)
++
++typedef PREPACK struct {
++    A_UINT8     networkType;
++    A_UINT8     dot11AuthMode;
++    A_UINT8     authMode;
++    A_UINT8     pairwiseCryptoType;
++    A_UINT8     pairwiseCryptoLen;
++    A_UINT8     groupCryptoType;
++    A_UINT8     groupCryptoLen;
++    A_UINT8     ssidLength;
++    A_UCHAR     ssid[WMI_MAX_SSID_LEN];
++    A_UINT16    channel;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT32    ctrl_flags;
++} POSTPACK WMI_CONNECT_CMD;
++
++/*
++ * WMI_RECONNECT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;                    /* hint */
++    A_UINT8     bssid[ATH_MAC_LEN];         /* mandatory if set */
++} POSTPACK WMI_RECONNECT_CMD;
++
++/*
++ * WMI_ADD_CIPHER_KEY_CMDID
++ */
++typedef enum {
++    PAIRWISE_USAGE      = 0x00,
++    GROUP_USAGE         = 0x01,
++    TX_USAGE            = 0x02,     /* default Tx Key - Static WEP only */
++} KEY_USAGE;
++
++/*
++ * Bit Flag
++ * Bit 0 - Initialise TSC - default is Initialize
++ */
++#define KEY_OP_INIT_TSC       0x01
++#define KEY_OP_INIT_RSC       0x02
++
++#define KEY_OP_INIT_VAL     0x03     /* Default Initialise the TSC & RSC */
++#define KEY_OP_VALID_MASK   0x03
++
++typedef PREPACK struct {
++    A_UINT8     keyIndex;
++    A_UINT8     keyType;
++    A_UINT8     keyUsage;           /* KEY_USAGE */
++    A_UINT8     keyLength;
++    A_UINT8     keyRSC[8];          /* key replay sequence counter */
++    A_UINT8     key[WMI_MAX_KEY_LEN];
++    A_UINT8     key_op_ctrl;       /* Additional Key Control information */
++} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
++
++/*
++ * WMI_DELETE_CIPHER_KEY_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     keyIndex;
++} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
++
++#define WMI_KRK_LEN     16
++/*
++ * WMI_ADD_KRK_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     krk[WMI_KRK_LEN];
++} POSTPACK WMI_ADD_KRK_CMD;
++
++/*
++ * WMI_SET_TKIP_COUNTERMEASURES_CMDID
++ */
++typedef enum {
++    WMI_TKIP_CM_DISABLE = 0x0,
++    WMI_TKIP_CM_ENABLE  = 0x1,
++} WMI_TKIP_CM_CONTROL;
++
++typedef PREPACK struct {
++    A_UINT8  cm_en;                     /* WMI_TKIP_CM_CONTROL */
++} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
++
++/*
++ * WMI_SET_PMKID_CMDID
++ */
++
++#define WMI_PMKID_LEN 16
++
++typedef enum {
++   PMKID_DISABLE = 0,
++   PMKID_ENABLE  = 1,
++} PMKID_ENABLE_FLG;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     enable;                 /* PMKID_ENABLE_FLG */
++    A_UINT8     pmkid[WMI_PMKID_LEN];
++} POSTPACK WMI_SET_PMKID_CMD;
++
++/*
++ * WMI_START_SCAN_CMD
++ */
++typedef enum {
++    WMI_LONG_SCAN  = 0,
++    WMI_SHORT_SCAN = 1,
++} WMI_SCAN_TYPE;
++
++typedef PREPACK struct {
++    A_BOOL   forceFgScan;
++    A_BOOL   isLegacy;        /* For Legacy Cisco AP compatibility */
++    A_UINT32 homeDwellTime;   /* Maximum duration in the home channel(milliseconds) */
++    A_UINT32 forceScanInterval;    /* Time interval between scans (milliseconds)*/
++    A_UINT8  scanType;           /* WMI_SCAN_TYPE */
++} POSTPACK WMI_START_SCAN_CMD;
++
++/*
++ * WMI_SET_SCAN_PARAMS_CMDID
++ */
++#define WMI_SHORTSCANRATIO_DEFAULT      3
++typedef enum {
++    CONNECT_SCAN_CTRL_FLAGS = 0x01,    /* set if can scan in the Connect cmd */
++    SCAN_CONNECTED_CTRL_FLAGS = 0x02,  /* set if scan for the SSID it is */
++                                       /* already connected to */
++    ACTIVE_SCAN_CTRL_FLAGS = 0x04,     /* set if enable active scan */
++    ROAM_SCAN_CTRL_FLAGS = 0x08,       /* set if enable roam scan when bmiss and lowrssi */
++    REPORT_BSSINFO_CTRL_FLAGS = 0x10,   /* set if follows customer BSSINFO reporting rule */
++    ENABLE_AUTO_CTRL_FLAGS = 0x20,      /* if disabled, target doesn't
++                                          scan after a disconnect event  */
++    ENABLE_SCAN_ABORT_EVENT = 0x40      /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
++
++} WMI_SCAN_CTRL_FLAGS_BITS;
++
++#define CAN_SCAN_IN_CONNECT(flags)      (flags & CONNECT_SCAN_CTRL_FLAGS)
++#define CAN_SCAN_CONNECTED(flags)       (flags & SCAN_CONNECTED_CTRL_FLAGS)
++#define ENABLE_ACTIVE_SCAN(flags)       (flags & ACTIVE_SCAN_CTRL_FLAGS)
++#define ENABLE_ROAM_SCAN(flags)         (flags & ROAM_SCAN_CTRL_FLAGS)
++#define CONFIG_REPORT_BSSINFO(flags)     (flags & REPORT_BSSINFO_CTRL_FLAGS)
++#define IS_AUTO_SCAN_ENABLED(flags)      (flags & ENABLE_AUTO_CTRL_FLAGS)
++#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
++
++#define DEFAULT_SCAN_CTRL_FLAGS         (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
++
++
++typedef PREPACK struct {
++    A_UINT16    fg_start_period;        /* seconds */
++    A_UINT16    fg_end_period;          /* seconds */
++    A_UINT16    bg_period;              /* seconds */
++    A_UINT16    maxact_chdwell_time;    /* msec */
++    A_UINT16    pas_chdwell_time;       /* msec */
++    A_UINT8     shortScanRatio;         /* how many shorts scan for one long */
++    A_UINT8     scanCtrlFlags;
++    A_UINT16    minact_chdwell_time;    /* msec */
++    A_UINT32    max_dfsch_act_time;  /* msecs */
++} POSTPACK WMI_SCAN_PARAMS_CMD;
++
++/*
++ * WMI_SET_BSS_FILTER_CMDID
++ */
++typedef enum {
++    NONE_BSS_FILTER = 0x0,              /* no beacons forwarded */
++    ALL_BSS_FILTER,                     /* all beacons forwarded */
++    PROFILE_FILTER,                     /* only beacons matching profile */
++    ALL_BUT_PROFILE_FILTER,             /* all but beacons matching profile */
++    CURRENT_BSS_FILTER,                 /* only beacons matching current BSS */
++    ALL_BUT_BSS_FILTER,                 /* all but beacons matching BSS */
++    PROBED_SSID_FILTER,                 /* beacons matching probed ssid */
++    LAST_BSS_FILTER,                    /* marker only */
++} WMI_BSS_FILTER;
++
++typedef PREPACK struct {
++    A_UINT8    bssFilter;                      /* see WMI_BSS_FILTER */
++    A_UINT32   ieMask;
++} POSTPACK WMI_BSS_FILTER_CMD;
++
++/*
++ * WMI_SET_PROBED_SSID_CMDID
++ */
++#define MAX_PROBED_SSID_INDEX   5
++
++typedef enum {
++    DISABLE_SSID_FLAG  = 0,                  /* disables entry */
++    SPECIFIC_SSID_FLAG = 0x01,               /* probes specified ssid */
++    ANY_SSID_FLAG      = 0x02,               /* probes for any ssid */
++} WMI_SSID_FLAG;
++
++typedef PREPACK struct {
++    A_UINT8     entryIndex;                     /* 0 to MAX_PROBED_SSID_INDEX */
++    A_UINT8     flag;                           /* WMI_SSID_FLG */
++    A_UINT8     ssidLength;
++    A_UINT8     ssid[32];
++} POSTPACK WMI_PROBED_SSID_CMD;
++
++/*
++ * WMI_SET_LISTEN_INT_CMDID
++ * The Listen interval is between 15 and 3000 TUs
++ */
++#define MIN_LISTEN_INTERVAL 15
++#define MAX_LISTEN_INTERVAL 5000
++#define MIN_LISTEN_BEACONS 1
++#define MAX_LISTEN_BEACONS 50
++
++typedef PREPACK struct {
++    A_UINT16     listenInterval;
++    A_UINT16     numBeacons;
++} POSTPACK WMI_LISTEN_INT_CMD;
++
++/*
++ * WMI_SET_BEACON_INT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16     beaconInterval;
++} POSTPACK WMI_BEACON_INT_CMD;
++
++/*
++ * WMI_SET_BMISS_TIME_CMDID
++ * valid values are between 1000 and 5000 TUs
++ */
++
++#define MIN_BMISS_TIME     1000
++#define MAX_BMISS_TIME     5000
++#define MIN_BMISS_BEACONS  1
++#define MAX_BMISS_BEACONS  50
++
++typedef PREPACK struct {
++    A_UINT16     bmissTime;
++    A_UINT16     numBeacons;
++} POSTPACK WMI_BMISS_TIME_CMD;
++
++/*
++ * WMI_SET_POWER_MODE_CMDID
++ */
++typedef enum {
++    REC_POWER = 0x01,
++    MAX_PERF_POWER,
++} WMI_POWER_MODE;
++
++typedef PREPACK struct {
++    A_UINT8     powerMode;      /* WMI_POWER_MODE */
++} POSTPACK WMI_POWER_MODE_CMD;
++
++/*
++ * WMI_SET_POWER_PARAMS_CMDID
++ */
++typedef enum {
++    IGNORE_DTIM = 0x01,
++    NORMAL_DTIM = 0x02,
++    STICK_DTIM  = 0x03,
++} WMI_DTIM_POLICY;
++
++typedef PREPACK struct {
++    A_UINT16    idle_period;             /* msec */
++    A_UINT16    pspoll_number;
++    A_UINT16    dtim_policy;
++} POSTPACK WMI_POWER_PARAMS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8    power_saving;
++    A_UINT8    ttl; /* number of beacon periods */
++    A_UINT16   atim_windows;          /* msec */
++    A_UINT16   timeout_value;         /* msec */
++} POSTPACK WMI_IBSS_PM_CAPS_CMD;
++
++/*
++ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
++ */
++typedef enum {
++    IGNORE_TIM_ALL_QUEUES_APSD = 0,
++    PROCESS_TIM_ALL_QUEUES_APSD = 1,
++    IGNORE_TIM_SIMULATED_APSD = 2,
++    PROCESS_TIM_SIMULATED_APSD = 3,
++} APSD_TIM_POLICY;
++
++typedef PREPACK struct {
++    A_UINT16    psPollTimeout;          /* msec */
++    A_UINT16    triggerTimeout;         /* msec */
++    A_UINT32    apsdTimPolicy;      /* TIM behavior with  ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
++    A_UINT32    simulatedAPSDTimPolicy;      /* TIM behavior with  simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
++} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
++
++/*
++ * WMI_SET_VOICE_PKT_SIZE_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16    voicePktSize;
++} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
++
++/*
++ * WMI_SET_MAX_SP_LEN_CMDID
++ */
++typedef enum {
++    DELIVER_ALL_PKT = 0x0,
++    DELIVER_2_PKT = 0x1,
++    DELIVER_4_PKT = 0x2,
++    DELIVER_6_PKT = 0x3,
++} APSD_SP_LEN_TYPE;
++
++typedef PREPACK struct {
++    A_UINT8    maxSPLen;
++} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
++
++/*
++ * WMI_SET_DISC_TIMEOUT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     disconnectTimeout;          /* seconds */
++} POSTPACK WMI_DISC_TIMEOUT_CMD;
++
++typedef enum {
++    UPLINK_TRAFFIC = 0,
++    DNLINK_TRAFFIC = 1,
++    BIDIR_TRAFFIC = 2,
++} DIR_TYPE;
++
++typedef enum {
++    DISABLE_FOR_THIS_AC = 0,
++    ENABLE_FOR_THIS_AC  = 1,
++    ENABLE_FOR_ALL_AC   = 2,
++} VOICEPS_CAP_TYPE;
++
++typedef enum {
++    TRAFFIC_TYPE_APERIODIC = 0,
++    TRAFFIC_TYPE_PERIODIC = 1,
++}TRAFFIC_TYPE;
++
++/*
++ * WMI_CREATE_PSTREAM_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT32        minServiceInt;           /* in milli-sec */
++    A_UINT32        maxServiceInt;           /* in milli-sec */
++    A_UINT32        inactivityInt;           /* in milli-sec */
++    A_UINT32        suspensionInt;           /* in milli-sec */
++    A_UINT32        serviceStartTime;
++    A_UINT32        minDataRate;             /* in bps */
++    A_UINT32        meanDataRate;            /* in bps */
++    A_UINT32        peakDataRate;            /* in bps */
++    A_UINT32        maxBurstSize;
++    A_UINT32        delayBound;
++    A_UINT32        minPhyRate;              /* in bps */
++    A_UINT32        sba;
++    A_UINT32        mediumTime;
++    A_UINT16        nominalMSDU;             /* in octects */
++    A_UINT16        maxMSDU;                 /* in octects */
++    A_UINT8         trafficClass;
++    A_UINT8         trafficType;             /* TRAFFIC_TYPE */
++    A_UINT8         trafficDirection;        /* TRAFFIC_DIR */
++    A_UINT8         voicePSCapability;       /* VOICEPS_CAP_TYPE */
++    A_UINT8         tsid;
++    A_UINT8         userPriority;            /* 802.1D user priority */
++} POSTPACK WMI_CREATE_PSTREAM_CMD;
++
++/*
++ * WMI_DELETE_PSTREAM_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     trafficClass;
++    A_UINT8     tsid;
++} POSTPACK WMI_DELETE_PSTREAM_CMD;
++
++/*
++ * WMI_SET_CHANNEL_PARAMS_CMDID
++ */
++typedef enum {
++    WMI_11A_MODE  = 0x1,
++    WMI_11G_MODE  = 0x2,
++    WMI_11AG_MODE = 0x3,
++    WMI_11B_MODE  = 0x4,
++    WMI_11GONLY_MODE = 0x5,
++} WMI_PHY_MODE;
++
++#define WMI_MAX_CHANNELS        32
++
++typedef PREPACK struct {
++    A_UINT8     reserved1;
++    A_UINT8     scanParam;              /* set if enable scan */
++    A_UINT8     phyMode;                /* see WMI_PHY_MODE */
++    A_UINT8     numChannels;            /* how many channels follow */
++    A_UINT16    channelList[1];         /* channels in Mhz */
++} POSTPACK WMI_CHANNEL_PARAMS_CMD;
++
++
++/*
++ *  WMI_RSSI_THRESHOLD_PARAMS_CMDID
++ *  Setting the polltime to 0 would disable polling.
++ *  Threshold values are in the ascending order, and should agree to:
++ *  (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
++ *      < highThreshold_upperVal)
++ */
++
++typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
++    A_UINT32    pollTime;               /* Polling time as a factor of LI */
++    A_INT16     thresholdAbove1_Val;          /* lowest of upper */
++    A_INT16     thresholdAbove2_Val;
++    A_INT16     thresholdAbove3_Val;
++    A_INT16     thresholdAbove4_Val;
++    A_INT16     thresholdAbove5_Val;
++    A_INT16     thresholdAbove6_Val;          /* highest of upper */
++    A_INT16     thresholdBelow1_Val;         /* lowest of bellow */
++    A_INT16     thresholdBelow2_Val;
++    A_INT16     thresholdBelow3_Val;
++    A_INT16     thresholdBelow4_Val;
++    A_INT16     thresholdBelow5_Val;
++    A_INT16     thresholdBelow6_Val;         /* highest of bellow */
++    A_UINT8     weight;                  /* "alpha" */
++    A_UINT8     reserved[3];
++} POSTPACK  WMI_RSSI_THRESHOLD_PARAMS_CMD;
++
++/*
++ *  WMI_SNR_THRESHOLD_PARAMS_CMDID
++ *  Setting the polltime to 0 would disable polling.
++ */
++
++typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
++    A_UINT32    pollTime;               /* Polling time as a factor of LI */
++    A_UINT8     weight;                  /* "alpha" */
++    A_UINT8     thresholdAbove1_Val;      /* lowest of uppper*/
++    A_UINT8     thresholdAbove2_Val;
++    A_UINT8     thresholdAbove3_Val;
++    A_UINT8     thresholdAbove4_Val;      /* highest of upper */
++    A_UINT8     thresholdBelow1_Val;     /* lowest of bellow */
++    A_UINT8     thresholdBelow2_Val;
++    A_UINT8     thresholdBelow3_Val;
++    A_UINT8     thresholdBelow4_Val;     /* highest of bellow */
++    A_UINT8     reserved[3];
++} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
++
++/*
++ *  WMI_LQ_THRESHOLD_PARAMS_CMDID
++ */
++typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
++    A_UINT8     enable;
++    A_UINT8     thresholdAbove1_Val;
++    A_UINT8     thresholdAbove2_Val;
++    A_UINT8     thresholdAbove3_Val;
++    A_UINT8     thresholdAbove4_Val;
++    A_UINT8     thresholdBelow1_Val;
++    A_UINT8     thresholdBelow2_Val;
++    A_UINT8     thresholdBelow3_Val;
++    A_UINT8     thresholdBelow4_Val;
++    A_UINT8     reserved[3];
++} POSTPACK  WMI_LQ_THRESHOLD_PARAMS_CMD;
++
++typedef enum {
++    WMI_LPREAMBLE_DISABLED = 0,
++    WMI_LPREAMBLE_ENABLED
++} WMI_LPREAMBLE_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8     status;
++}POSTPACK WMI_SET_LPREAMBLE_CMD;
++
++typedef PREPACK struct {
++    A_UINT16    threshold;
++}POSTPACK WMI_SET_RTS_CMD;
++
++/*
++ *  WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
++ *  Sets the error reporting event bitmask in target. Target clears it
++ *  upon an error. Subsequent errors are counted, but not reported
++ *  via event, unless the bitmask is set again.
++ */
++typedef PREPACK struct {
++    A_UINT32    bitmask;
++} POSTPACK  WMI_TARGET_ERROR_REPORT_BITMASK;
++
++/*
++ * WMI_SET_TX_PWR_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     dbM;                  /* in dbM units */
++} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
++
++/*
++ * WMI_SET_ASSOC_INFO_CMDID
++ *
++ * A maximum of 2 private IEs can be sent in the [Re]Assoc request.
++ * A 3rd one, the CCX version IE can also be set from the host.
++ */
++#define WMI_MAX_ASSOC_INFO_TYPE    2
++#define WMI_CCX_VER_IE             2 /* ieType to set CCX Version IE */
++
++#define WMI_MAX_ASSOC_INFO_LEN     240
++
++typedef PREPACK struct {
++    A_UINT8     ieType;
++    A_UINT8     bufferSize;
++    A_UINT8     assocInfo[1];       /* up to WMI_MAX_ASSOC_INFO_LEN */
++} POSTPACK WMI_SET_ASSOC_INFO_CMD;
++
++
++/*
++ * WMI_GET_TX_PWR_CMDID does not take any parameters
++ */
++
++/*
++ * WMI_ADD_BAD_AP_CMDID
++ */
++#define WMI_MAX_BAD_AP_INDEX      1
++
++typedef PREPACK struct {
++    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_ADD_BAD_AP_CMD;
++
++/*
++ * WMI_DELETE_BAD_AP_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
++} POSTPACK WMI_DELETE_BAD_AP_CMD;
++
++/*
++ * WMI_SET_ACCESS_PARAMS_CMDID
++ */
++#define WMI_DEFAULT_TXOP_ACPARAM    0       /* implies one MSDU */
++#define WMI_DEFAULT_ECWMIN_ACPARAM  4       /* corresponds to CWmin of 15 */
++#define WMI_DEFAULT_ECWMAX_ACPARAM  10      /* corresponds to CWmax of 1023 */
++#define WMI_MAX_CW_ACPARAM          15      /* maximum eCWmin or eCWmax */
++#define WMI_DEFAULT_AIFSN_ACPARAM   2
++#define WMI_MAX_AIFSN_ACPARAM       15
++typedef PREPACK struct {
++    A_UINT16 txop;                      /* in units of 32 usec */
++    A_UINT8  eCWmin;
++    A_UINT8  eCWmax;
++    A_UINT8  aifsn;
++} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
++
++
++/*
++ * WMI_SET_RETRY_LIMITS_CMDID
++ *
++ * This command is used to customize the number of retries the
++ * wlan device will perform on a given frame.
++ */
++#define WMI_MIN_RETRIES 2
++#define WMI_MAX_RETRIES 13
++typedef enum {
++    MGMT_FRAMETYPE    = 0,
++    CONTROL_FRAMETYPE = 1,
++    DATA_FRAMETYPE    = 2
++} WMI_FRAMETYPE;
++
++typedef PREPACK struct {
++    A_UINT8 frameType;                      /* WMI_FRAMETYPE */
++    A_UINT8 trafficClass;                   /* applies only to DATA_FRAMETYPE */
++    A_UINT8 maxRetries;
++    A_UINT8 enableNotify;
++} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
++
++/*
++ * WMI_SET_ROAM_CTRL_CMDID
++ *
++ * This command is used to influence the Roaming behaviour
++ * Set the host biases of the BSSs before setting the roam mode as bias
++ * based.
++ */
++
++/*
++ * Different types of Roam Control
++ */
++
++typedef enum {
++        WMI_FORCE_ROAM          = 1,      /* Roam to the specified BSSID */
++        WMI_SET_ROAM_MODE       = 2,      /* default ,progd bias, no roam */
++        WMI_SET_HOST_BIAS       = 3,     /* Set the Host Bias */
++        WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
++} WMI_ROAM_CTRL_TYPE;
++
++#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
++#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
++
++/*
++ * ROAM MODES
++ */
++
++typedef enum {
++        WMI_DEFAULT_ROAM_MODE   = 1,  /* RSSI based ROAM */
++        WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
++        WMI_LOCK_BSS_MODE  = 3  /* Lock to the Current BSS - no Roam */
++} WMI_ROAM_MODE;
++
++/*
++ * BSS HOST BIAS INFO
++ */
++
++typedef PREPACK struct {
++        A_UINT8 bssid[ATH_MAC_LEN];
++        A_INT8  bias;
++} POSTPACK WMI_BSS_BIAS;
++
++typedef PREPACK struct {
++        A_UINT8 numBss;
++        WMI_BSS_BIAS bssBias[1];
++} POSTPACK WMI_BSS_BIAS_INFO;
++
++typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
++        A_UINT16 lowrssi_scan_period;
++        A_INT16  lowrssi_scan_threshold;
++        A_INT16  lowrssi_roam_threshold;
++        A_UINT8  roam_rssi_floor;
++        A_UINT8  reserved[1];              /* For alignment */
++} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
++
++typedef PREPACK struct {
++    PREPACK union {
++        A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
++        A_UINT8 roamMode;           /* WMI_SET_ROAM_MODE  */
++        WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
++        WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
++    } POSTPACK info;
++    A_UINT8   roamCtrlType ;
++} POSTPACK WMI_SET_ROAM_CTRL_CMD;
++
++/*
++ * WMI_ENABLE_RM_CMDID
++ */
++typedef PREPACK struct {
++        A_BOOL enable_radio_measurements;
++} POSTPACK WMI_ENABLE_RM_CMD;
++
++/*
++ * WMI_SET_MAX_OFFHOME_DURATION_CMDID
++ */
++typedef PREPACK struct {
++        A_UINT8 max_offhome_duration;
++} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
++
++typedef PREPACK struct {
++    A_UINT32 frequency;
++    A_UINT8  threshold;
++} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
++
++typedef enum {
++    BT_STREAM_UNDEF = 0,
++    BT_STREAM_SCO,             /* SCO stream */
++    BT_STREAM_A2DP,            /* A2DP stream */
++    BT_STREAM_MAX
++} BT_STREAM_TYPE;
++
++typedef enum {
++    BT_PARAM_SCO = 1,         /* SCO stream parameters */
++    BT_PARAM_A2DP,            /* A2DP stream parameters */
++    BT_PARAM_MISC,            /* miscellaneous parameters */
++    BT_PARAM_REGS,            /* co-existence register parameters */
++    BT_PARAM_MAX
++} BT_PARAM_TYPE;
++
++typedef enum {
++    BT_STATUS_UNDEF = 0,
++    BT_STATUS_START,
++    BT_STATUS_STOP,
++    BT_STATUS_RESUME,
++    BT_STATUS_SUSPEND,
++    BT_STATUS_MAX
++} BT_STREAM_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8 streamType;
++    A_UINT8 status;
++} POSTPACK WMI_SET_BT_STATUS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 noSCOPkts;
++    A_UINT8 pspollTimeout;
++    A_UINT8 stompbt;
++} POSTPACK BT_PARAMS_SCO;
++
++typedef PREPACK struct {
++    A_UINT32 period;
++    A_UINT32 dutycycle;
++    A_UINT8  stompbt;
++} POSTPACK BT_PARAMS_A2DP;
++
++typedef PREPACK struct {
++    A_UINT32 mode;
++    A_UINT32 scoWghts;
++    A_UINT32 a2dpWghts;
++    A_UINT32 genWghts;
++    A_UINT32 mode2;
++    A_UINT8  setVal;
++} POSTPACK BT_COEX_REGS;
++
++typedef enum {
++    WLAN_PROTECT_POLICY = 1,
++    WLAN_COEX_CTRL_FLAGS
++} BT_PARAMS_MISC_TYPE;
++
++typedef enum {
++    WLAN_PROTECT_PER_STREAM = 0x01,   /* default */
++    WLAN_PROTECT_ANY_TX = 0x02
++} WLAN_PROTECT_FLAGS;
++
++
++#define WLAN_DISABLE_COEX_IN_DISCONNECT   0x01 /* default */
++#define WLAN_KEEP_COEX_IN_DISCONNECT      0x02
++#define WLAN_STOMPBT_IN_DISCONNECT        0x04
++
++#define WLAN_DISABLE_COEX_IN_ROAM         0x10 /* default */
++#define WLAN_KEEP_COEX_IN_ROAM            0x20
++#define WLAN_STOMPBT_IN_ROAM              0x40
++
++#define WLAN_DISABLE_COEX_IN_SCAN        0x100 /* default */
++#define WLAN_KEEP_COEX_IN_SCAN           0x200
++#define WLAN_STOMPBT_IN_SCAN             0x400
++
++#define WLAN_DISABLE_COEX_BT_OFF        0x1000 /* default */
++#define WLAN_KEEP_COEX_BT_OFF           0x2000
++#define WLAN_STOMPBT_BT_OFF             0x4000
++
++typedef PREPACK struct {
++    A_UINT32 period;
++    A_UINT32 dutycycle;
++    A_UINT8  stompbt;
++    A_UINT8  policy;
++} POSTPACK WLAN_PROTECT_POLICY_TYPE;
++
++typedef PREPACK struct {
++    PREPACK union {
++        WLAN_PROTECT_POLICY_TYPE protectParams;
++        A_UINT16 wlanCtrlFlags;
++    } POSTPACK info;
++    A_UINT8 paramType;
++} POSTPACK BT_PARAMS_MISC;
++
++typedef PREPACK struct {
++    PREPACK union {
++        BT_PARAMS_SCO scoParams;
++        BT_PARAMS_A2DP a2dpParams;
++        BT_PARAMS_MISC miscParams;
++        BT_COEX_REGS regs;
++    } POSTPACK info;
++    A_UINT8 paramType;
++} POSTPACK WMI_SET_BT_PARAMS_CMD;
++
++/*
++ * Command Replies
++ */
++
++/*
++ * WMI_GET_CHANNEL_LIST_CMDID reply
++ */
++typedef PREPACK struct {
++    A_UINT8     reserved1;
++    A_UINT8     numChannels;            /* number of channels in reply */
++    A_UINT16    channelList[1];         /* channel in Mhz */
++} POSTPACK WMI_CHANNEL_LIST_REPLY;
++
++typedef enum {
++    A_SUCCEEDED = A_OK,
++    A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
++    A_SUCCEEDED_MODIFY_STREAM=251,
++    A_FAILED_INVALID_STREAM = 252,
++    A_FAILED_MAX_THINSTREAMS = 253,
++    A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
++} PSTREAM_REPLY_STATUS;
++
++/*
++ * List of Events (target to host)
++ */
++typedef enum {
++    WMI_READY_EVENTID           = 0x1001,
++    WMI_CONNECT_EVENTID,
++    WMI_DISCONNECT_EVENTID,
++    WMI_BSSINFO_EVENTID,
++    WMI_CMDERROR_EVENTID,
++    WMI_REGDOMAIN_EVENTID,
++    WMI_PSTREAM_TIMEOUT_EVENTID,
++    WMI_NEIGHBOR_REPORT_EVENTID,
++    WMI_TKIP_MICERR_EVENTID,
++    WMI_SCAN_COMPLETE_EVENTID,
++    WMI_REPORT_STATISTICS_EVENTID,
++    WMI_RSSI_THRESHOLD_EVENTID,
++    WMI_ERROR_REPORT_EVENTID,
++    WMI_OPT_RX_FRAME_EVENTID,
++    WMI_REPORT_ROAM_TBL_EVENTID,
++    WMI_EXTENSION_EVENTID,
++    WMI_CAC_EVENTID,
++    WMI_SNR_THRESHOLD_EVENTID,
++    WMI_LQ_THRESHOLD_EVENTID,
++    WMI_TX_RETRY_ERR_EVENTID,
++    WMI_REPORT_ROAM_DATA_EVENTID,
++    WMI_TEST_EVENTID,
++    WMI_APLIST_EVENTID,
++    WMI_GET_WOW_LIST_EVENTID,
++    WMI_GET_PMKID_LIST_EVENTID
++} WMI_EVENT_ID;
++
++typedef enum {
++    WMI_11A_CAPABILITY   = 1,
++    WMI_11G_CAPABILITY   = 2,
++    WMI_11AG_CAPABILITY  = 3,
++} WMI_PHY_CAPABILITY;
++
++typedef PREPACK struct {
++    A_UINT8     macaddr[ATH_MAC_LEN];
++    A_UINT8     phyCapability;              /* WMI_PHY_CAPABILITY */
++} POSTPACK WMI_READY_EVENT;
++
++/*
++ * Connect Event
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT16    listenInterval;
++    A_UINT16    beaconInterval;
++    A_UINT32    networkType;
++    A_UINT8     beaconIeLen;
++    A_UINT8     assocReqLen;
++    A_UINT8     assocRespLen;
++    A_UINT8     assocInfo[1];
++} POSTPACK WMI_CONNECT_EVENT;
++
++/*
++ * Disconnect Event
++ */
++typedef enum {
++    NO_NETWORK_AVAIL   = 0x01,
++    LOST_LINK          = 0x02,     /* bmiss */
++    DISCONNECT_CMD     = 0x03,
++    BSS_DISCONNECTED   = 0x04,
++    AUTH_FAILED        = 0x05,
++    ASSOC_FAILED       = 0x06,
++    NO_RESOURCES_AVAIL = 0x07,
++    CSERV_DISCONNECT   = 0x08,
++    INVALID_PROFILE    = 0x0a,
++    DOT11H_CHANNEL_SWITCH = 0x0b,
++} WMI_DISCONNECT_REASON;
++
++typedef PREPACK struct {
++    A_UINT16    protocolReasonStatus;  /* reason code, see 802.11 spec. */
++    A_UINT8     bssid[ATH_MAC_LEN];    /* set if known */
++    A_UINT8     disconnectReason ;      /* see WMI_DISCONNECT_REASON */
++    A_UINT8     assocRespLen;
++    A_UINT8     assocInfo[1];
++} POSTPACK WMI_DISCONNECT_EVENT;
++
++/*
++ * BSS Info Event.
++ * Mechanism used to inform host of the presence and characteristic of
++ * wireless networks present.  Consists of bss info header followed by
++ * the beacon or probe-response frame body.  The 802.11 header is not included.
++ */
++typedef enum {
++    BEACON_FTYPE = 0x1,
++    PROBERESP_FTYPE,
++    ACTION_MGMT_FTYPE,
++} WMI_BI_FTYPE;
++
++enum {
++    BSS_ELEMID_CHANSWITCH = 0x01,
++    BSS_ELEMID_ATHEROS = 0x02,
++};
++
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     frameType;          /* see WMI_BI_FTYPE */
++    A_UINT8     snr;
++    A_INT16     rssi;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT32    ieMask;
++} POSTPACK WMI_BSS_INFO_HDR;
++
++/*
++ * Command Error Event
++ */
++typedef enum {
++    INVALID_PARAM  = 0x01,
++    ILLEGAL_STATE  = 0x02,
++    INTERNAL_ERROR = 0x03,
++} WMI_ERROR_CODE;
++
++typedef PREPACK struct {
++    A_UINT16    commandId;
++    A_UINT8     errorCode;
++} POSTPACK WMI_CMD_ERROR_EVENT;
++
++/*
++ * New Regulatory Domain Event
++ */
++typedef PREPACK struct {
++    A_UINT32    regDomain;
++} POSTPACK WMI_REG_DOMAIN_EVENT;
++
++typedef PREPACK struct {
++    A_UINT8     trafficClass;
++} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
++
++/*
++ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
++ * the host of BSS's it has found that matches the current profile.
++ * It can be used by the host to cache PMKs and/to initiate pre-authentication
++ * if the BSS supports it.  The first bssid is always the current associated
++ * BSS.
++ * The bssid and bssFlags information repeats according to the number
++ * or APs reported.
++ */
++typedef enum {
++    WMI_DEFAULT_BSS_FLAGS   = 0x00,
++    WMI_PREAUTH_CAPABLE_BSS = 0x01,
++    WMI_PMKID_VALID_BSS     = 0x02,
++} WMI_BSS_FLAGS;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     bssFlags;            /* see WMI_BSS_FLAGS */
++} POSTPACK WMI_NEIGHBOR_INFO;
++
++typedef PREPACK struct {
++    A_INT8      numberOfAps;
++    WMI_NEIGHBOR_INFO neighbor[1];
++} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
++
++/*
++ * TKIP MIC Error Event
++ */
++typedef PREPACK struct {
++    A_UINT8 keyid;
++    A_UINT8 ismcast;
++} POSTPACK WMI_TKIP_MICERR_EVENT;
++
++/*
++ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
++ */
++typedef PREPACK struct {
++    A_STATUS status;
++} POSTPACK WMI_SCAN_COMPLETE_EVENT;
++
++#define MAX_OPT_DATA_LEN 1400
++
++/*
++ * WMI_SET_ADHOC_BSSID_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
++
++/*
++ * WMI_SET_OPT_MODE_CMDID
++ */
++typedef enum {
++    SPECIAL_OFF,
++    SPECIAL_ON,
++} OPT_MODE_TYPE;
++
++typedef PREPACK struct {
++    A_UINT8     optMode;
++} POSTPACK WMI_SET_OPT_MODE_CMD;
++
++/*
++ * WMI_TX_OPT_FRAME_CMDID
++ */
++typedef enum {
++    OPT_PROBE_REQ   = 0x01,
++    OPT_PROBE_RESP  = 0x02,
++    OPT_CPPP_START  = 0x03,
++    OPT_CPPP_STOP   = 0x04,
++} WMI_OPT_FTYPE;
++
++typedef PREPACK struct {
++    A_UINT16    optIEDataLen;
++    A_UINT8     frmType;
++    A_UINT8     dstAddr[ATH_MAC_LEN];
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     reserved;               /* For alignment */
++    A_UINT8     optIEData[1];
++} POSTPACK WMI_OPT_TX_FRAME_CMD;
++
++/*
++ * Special frame receive Event.
++ * Mechanism used to inform host of the receiption of the special frames.
++ * Consists of special frame info header followed by special frame body.
++ * The 802.11 header is not included.
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     frameType;          /* see WMI_OPT_FTYPE */
++    A_INT8      snr;
++    A_UINT8     srcAddr[ATH_MAC_LEN];
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_OPT_RX_INFO_HDR;
++
++/*
++ * Reporting statistics.
++ */
++typedef PREPACK struct {
++    A_UINT32   tx_packets;
++    A_UINT32   tx_bytes;
++    A_UINT32   tx_unicast_pkts;
++    A_UINT32   tx_unicast_bytes;
++    A_UINT32   tx_multicast_pkts;
++    A_UINT32   tx_multicast_bytes;
++    A_UINT32   tx_broadcast_pkts;
++    A_UINT32   tx_broadcast_bytes;
++    A_UINT32   tx_rts_success_cnt;
++    A_UINT32   tx_packet_per_ac[4];
++    A_UINT32   tx_errors_per_ac[4];
++
++    A_UINT32   tx_errors;
++    A_UINT32   tx_failed_cnt;
++    A_UINT32   tx_retry_cnt;
++    A_UINT32   tx_rts_fail_cnt;
++    A_INT32    tx_unicast_rate;
++}POSTPACK tx_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   rx_packets;
++    A_UINT32   rx_bytes;
++    A_UINT32   rx_unicast_pkts;
++    A_UINT32   rx_unicast_bytes;
++    A_UINT32   rx_multicast_pkts;
++    A_UINT32   rx_multicast_bytes;
++    A_UINT32   rx_broadcast_pkts;
++    A_UINT32   rx_broadcast_bytes;
++    A_UINT32   rx_fragment_pkt;
++
++    A_UINT32   rx_errors;
++    A_UINT32   rx_crcerr;
++    A_UINT32   rx_key_cache_miss;
++    A_UINT32   rx_decrypt_err;
++    A_UINT32   rx_duplicate_frames;
++    A_INT32    rx_unicast_rate;
++}POSTPACK rx_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   tkip_local_mic_failure;
++    A_UINT32   tkip_counter_measures_invoked;
++    A_UINT32   tkip_replays;
++    A_UINT32   tkip_format_errors;
++    A_UINT32   ccmp_format_errors;
++    A_UINT32   ccmp_replays;
++}POSTPACK tkip_ccmp_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   power_save_failure_cnt;
++}POSTPACK pm_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32    cs_bmiss_cnt;
++    A_UINT32    cs_lowRssi_cnt;
++    A_UINT16    cs_connect_cnt;
++    A_UINT16    cs_disconnect_cnt;
++    A_INT16     cs_aveBeacon_rssi;
++    A_UINT16    cs_roam_count;
++    A_UINT16    cs_rssi;
++    A_UINT8     cs_snr;
++    A_UINT8     cs_aveBeacon_snr;
++    A_UINT8     cs_lastRoam_msec;
++} POSTPACK cserv_stats_t;
++
++typedef PREPACK struct {
++    tx_stats_t          tx_stats;
++    rx_stats_t          rx_stats;
++    tkip_ccmp_stats_t   tkipCcmpStats;
++}POSTPACK wlan_net_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32    wow_num_pkts_dropped;
++    A_UINT16    wow_num_events_discarded;
++    A_UINT8     wow_num_host_pkt_wakeups;
++    A_UINT8     wow_num_host_event_wakeups;
++} POSTPACK wlan_wow_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32            lqVal;
++    A_INT32             noise_floor_calibation;
++    pm_stats_t          pmStats;
++    wlan_net_stats_t    txrxStats;
++    wlan_wow_stats_t    wowStats;
++    cserv_stats_t       cservStats;
++} POSTPACK WMI_TARGET_STATS;
++
++/*
++ * WMI_RSSI_THRESHOLD_EVENTID.
++ * Indicate the RSSI events to host. Events are indicated when we breach a
++ * thresold value.
++ */
++typedef enum{
++    WMI_RSSI_THRESHOLD1_ABOVE = 0,
++    WMI_RSSI_THRESHOLD2_ABOVE,
++    WMI_RSSI_THRESHOLD3_ABOVE,
++    WMI_RSSI_THRESHOLD4_ABOVE,
++    WMI_RSSI_THRESHOLD5_ABOVE,
++    WMI_RSSI_THRESHOLD6_ABOVE,
++    WMI_RSSI_THRESHOLD1_BELOW,
++    WMI_RSSI_THRESHOLD2_BELOW,
++    WMI_RSSI_THRESHOLD3_BELOW,
++    WMI_RSSI_THRESHOLD4_BELOW,
++    WMI_RSSI_THRESHOLD5_BELOW,
++    WMI_RSSI_THRESHOLD6_BELOW
++}WMI_RSSI_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_INT16 rssi;
++    A_UINT8 range;
++}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
++
++/*
++ *  WMI_ERROR_REPORT_EVENTID
++ */
++typedef enum{
++    WMI_TARGET_PM_ERR_FAIL      = 0x00000001,
++    WMI_TARGET_KEY_NOT_FOUND    = 0x00000002,
++    WMI_TARGET_DECRYPTION_ERR   = 0x00000004,
++    WMI_TARGET_BMISS            = 0x00000008,
++    WMI_PSDISABLE_NODE_JOIN     = 0x00000010,
++    WMI_TARGET_COM_ERR          = 0x00000020,
++    WMI_TARGET_FATAL_ERR        = 0x00000040
++} WMI_TARGET_ERROR_VAL;
++
++typedef PREPACK struct {
++    A_UINT32 errorVal;
++}POSTPACK  WMI_TARGET_ERROR_REPORT_EVENT;
++
++typedef PREPACK struct {
++    A_UINT8 retrys;
++}POSTPACK  WMI_TX_RETRY_ERR_EVENT;
++
++typedef enum{
++    WMI_SNR_THRESHOLD1_ABOVE = 1,
++    WMI_SNR_THRESHOLD1_BELOW,
++    WMI_SNR_THRESHOLD2_ABOVE,
++    WMI_SNR_THRESHOLD2_BELOW,
++    WMI_SNR_THRESHOLD3_ABOVE,
++    WMI_SNR_THRESHOLD3_BELOW,
++    WMI_SNR_THRESHOLD4_ABOVE,
++    WMI_SNR_THRESHOLD4_BELOW
++} WMI_SNR_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_UINT8 range;  /* WMI_SNR_THRESHOLD_VAL */
++    A_UINT8 snr;
++}POSTPACK  WMI_SNR_THRESHOLD_EVENT;
++
++typedef enum{
++    WMI_LQ_THRESHOLD1_ABOVE = 1,
++    WMI_LQ_THRESHOLD1_BELOW,
++    WMI_LQ_THRESHOLD2_ABOVE,
++    WMI_LQ_THRESHOLD2_BELOW,
++    WMI_LQ_THRESHOLD3_ABOVE,
++    WMI_LQ_THRESHOLD3_BELOW,
++    WMI_LQ_THRESHOLD4_ABOVE,
++    WMI_LQ_THRESHOLD4_BELOW
++} WMI_LQ_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_INT32 lq;
++    A_UINT8 range;  /* WMI_LQ_THRESHOLD_VAL */
++}POSTPACK  WMI_LQ_THRESHOLD_EVENT;
++/*
++ * WMI_REPORT_ROAM_TBL_EVENTID
++ */
++#define MAX_ROAM_TBL_CAND   5
++
++typedef PREPACK struct {
++    A_INT32 roam_util;
++    A_UINT8 bssid[ATH_MAC_LEN];
++    A_INT8  rssi;
++    A_INT8  rssidt;
++    A_INT8  last_rssi;
++    A_INT8  util;
++    A_INT8  bias;
++    A_UINT8 reserved; /* For alignment */
++} POSTPACK WMI_BSS_ROAM_INFO;
++
++
++typedef PREPACK struct {
++    A_UINT16  roamMode;
++    A_UINT16  numEntries;
++    WMI_BSS_ROAM_INFO bssRoamInfo[1];
++} POSTPACK WMI_TARGET_ROAM_TBL;
++
++/*
++ *  WMI_CAC_EVENTID
++ */
++typedef enum {
++    CAC_INDICATION_ADMISSION = 0x00,
++    CAC_INDICATION_ADMISSION_RESP = 0x01,
++    CAC_INDICATION_DELETE = 0x02,
++    CAC_INDICATION_NO_RESP = 0x03,
++}CAC_INDICATION;
++
++#define WMM_TSPEC_IE_LEN   63
++
++typedef PREPACK struct {
++    A_UINT8 ac;
++    A_UINT8 cac_indication;
++    A_UINT8 statusCode;
++    A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
++}POSTPACK  WMI_CAC_EVENT;
++
++/*
++ * WMI_APLIST_EVENTID
++ */
++
++typedef enum {
++    APLIST_VER1 = 1,
++} APLIST_VER;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT16    channel;
++} POSTPACK  WMI_AP_INFO_V1;
++
++typedef PREPACK union {
++    WMI_AP_INFO_V1  apInfoV1;
++} POSTPACK WMI_AP_INFO;
++
++typedef PREPACK struct {
++    A_UINT8     apListVer;
++    A_UINT8     numAP;
++    WMI_AP_INFO apList[1];
++} POSTPACK WMI_APLIST_EVENT;
++
++/*
++ * developer commands
++ */
++
++/*
++ * WMI_SET_BITRATE_CMDID
++ *
++ * Get bit rate cmd uses same definition as set bit rate cmd
++ */
++typedef enum {
++    RATE_AUTO   = -1,
++    RATE_1Mb    = 0,
++    RATE_2Mb    = 1,
++    RATE_5_5Mb  = 2,
++    RATE_11Mb   = 3,
++    RATE_6Mb    = 4,
++    RATE_9Mb    = 5,
++    RATE_12Mb   = 6,
++    RATE_18Mb   = 7,
++    RATE_24Mb   = 8,
++    RATE_36Mb   = 9,
++    RATE_48Mb   = 10,
++    RATE_54Mb   = 11,
++} WMI_BIT_RATE;
++
++typedef PREPACK struct {
++    A_INT8      rateIndex;          /* see WMI_BIT_RATE */
++} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY;
++
++/*
++ * WMI_SET_FIXRATES_CMDID
++ *
++ * Get fix rates cmd uses same definition as set fix rates cmd
++ */
++typedef enum {
++    FIX_RATE_1Mb    = 0x1,
++    FIX_RATE_2Mb    = 0x2,
++    FIX_RATE_5_5Mb  = 0x4,
++    FIX_RATE_11Mb   = 0x8,
++    FIX_RATE_6Mb    = 0x10,
++    FIX_RATE_9Mb    = 0x20,
++    FIX_RATE_12Mb   = 0x40,
++    FIX_RATE_18Mb   = 0x80,
++    FIX_RATE_24Mb   = 0x100,
++    FIX_RATE_36Mb   = 0x200,
++    FIX_RATE_48Mb   = 0x400,
++    FIX_RATE_54Mb   = 0x800,
++} WMI_FIX_RATES_MASK;
++
++typedef PREPACK struct {
++    A_UINT16      fixRateMask;          /* see WMI_BIT_RATE */
++} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
++
++/*
++ * WMI_SET_RECONNECT_AUTH_MODE_CMDID
++ *
++ * Set authentication mode
++ */
++typedef enum {
++    RECONN_DO_AUTH = 0x00,
++    RECONN_NOT_AUTH = 0x01
++} WMI_AUTH_MODE;
++
++typedef PREPACK struct {
++    A_UINT8 mode;
++} POSTPACK WMI_SET_AUTH_MODE_CMD;
++
++/*
++ * WMI_SET_REASSOC_MODE_CMDID
++ *
++ * Set authentication mode
++ */
++typedef enum {
++    REASSOC_DO_DISASSOC = 0x00,
++    REASSOC_DONOT_DISASSOC = 0x01
++} WMI_REASSOC_MODE;
++
++typedef PREPACK struct {
++    A_UINT8 mode;
++}POSTPACK WMI_SET_REASSOC_MODE_CMD;
++
++typedef enum {
++    ROAM_DATA_TIME = 1,            /* Get The Roam Time Data */
++} ROAM_DATA_TYPE;
++
++typedef PREPACK struct {
++    A_UINT32        disassoc_time;
++    A_UINT32        no_txrx_time;
++    A_UINT32        assoc_time;
++    A_UINT32        allow_txrx_time;
++    A_UINT32        last_data_txrx_time;
++    A_UINT32        first_data_txrx_time;
++    A_UINT8         disassoc_bssid[ATH_MAC_LEN];
++    A_INT8          disassoc_bss_rssi;
++    A_UINT8         assoc_bssid[ATH_MAC_LEN];
++    A_INT8          assoc_bss_rssi;
++} POSTPACK WMI_TARGET_ROAM_TIME;
++
++typedef PREPACK struct {
++    PREPACK union {
++        WMI_TARGET_ROAM_TIME roamTime;
++    } POSTPACK u;
++    A_UINT8 roamDataType ;
++} POSTPACK WMI_TARGET_ROAM_DATA;
++
++typedef enum {
++    WMI_WMM_DISABLED = 0,
++    WMI_WMM_ENABLED
++} WMI_WMM_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8    status;
++}POSTPACK WMI_SET_WMM_CMD;
++
++typedef enum {
++    WMI_TXOP_DISABLED = 0,
++    WMI_TXOP_ENABLED
++} WMI_TXOP_CFG;
++
++typedef PREPACK struct {
++    A_UINT8    txopEnable;
++}POSTPACK WMI_SET_WMM_TXOP_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 keepaliveInterval;
++} POSTPACK WMI_SET_KEEPALIVE_CMD;
++
++typedef PREPACK struct {
++    A_BOOL configured;
++    A_UINT8 keepaliveInterval;
++} POSTPACK WMI_GET_KEEPALIVE_CMD;
++
++/*
++ * Add Application specified IE to a management frame
++ */
++#define WMI_MAX_IE_LEN  78
++
++typedef PREPACK struct {
++    A_UINT8 mgmtFrmType;  /* one of WMI_MGMT_FRAME_TYPE */
++    A_UINT8 ieLen;    /* Length  of the IE that should be added to the MGMT frame */
++    A_UINT8 ieInfo[1];
++} POSTPACK WMI_SET_APPIE_CMD;
++
++/*
++ * Notify the WSC registration status to the target
++ */
++#define WSC_REG_ACTIVE     1
++#define WSC_REG_INACTIVE   0
++/* Generic Hal Interface for setting hal paramters. */
++/* Add new Set HAL Param cmdIds here for newer params */
++typedef enum {
++   WHAL_SETCABTO_CMDID = 1,
++}WHAL_CMDID;
++
++typedef PREPACK struct {
++    A_UINT8 cabTimeOut;
++} POSTPACK WHAL_SETCABTO_PARAM;
++
++typedef PREPACK struct {
++    A_UINT8  whalCmdId;
++    A_UINT8 data[1];
++} POSTPACK WHAL_PARAMCMD;
++
++
++#define WOW_MAX_FILTER_LISTS 1 /*4*/
++#define WOW_MAX_FILTERS_PER_LIST 4
++#define WOW_PATTERN_SIZE 64
++#define WOW_MASK_SIZE 64
++
++typedef PREPACK struct {
++    A_UINT8 wow_valid_filter;
++    A_UINT8 wow_filter_id;
++    A_UINT8 wow_filter_size;
++    A_UINT8 wow_filter_offset;
++    A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
++    A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
++} POSTPACK WOW_FILTER;
++
++
++typedef PREPACK struct {
++    A_UINT8 wow_valid_list;
++    A_UINT8 wow_list_id;
++    A_UINT8 wow_num_filters;
++    A_UINT8 wow_total_list_size;
++    WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
++} POSTPACK WOW_FILTER_LIST;
++
++typedef PREPACK struct {
++    A_BOOL awake;
++    A_BOOL asleep;
++} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
++
++typedef PREPACK struct {
++    A_BOOL enable_wow;
++} POSTPACK WMI_SET_WOW_MODE_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 filter_list_id;
++} POSTPACK WMI_GET_WOW_LIST_CMD;
++
++/*
++ * WMI_GET_WOW_LIST_CMD reply
++ */
++typedef PREPACK struct {
++    A_UINT8     num_filters;     /* number of patterns in reply */
++    A_UINT8     this_filter_num; /*  this is filter # x of total num_filters */
++    A_UINT8     wow_mode;
++    A_UINT8     host_mode;
++    WOW_FILTER  wow_filters[1];
++} POSTPACK WMI_GET_WOW_LIST_REPLY;
++
++typedef PREPACK struct {
++    A_UINT8 filter_list_id;
++    A_UINT8 filter_size;
++    A_UINT8 filter_offset;
++    A_UINT8 filter[1];
++} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
++
++typedef PREPACK struct {
++    A_UINT16 filter_list_id;
++    A_UINT16 filter_id;
++} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 macaddr[ATH_MAC_LEN];
++} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
++
++/*
++ * WMI_SET_AKMP_PARAMS_CMD
++ */
++
++#define WMI_AKMP_MULTI_PMKID_EN   0x000001
++
++typedef PREPACK struct {
++    A_UINT32    akmpInfo;
++} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 pmkid[WMI_PMKID_LEN];
++} POSTPACK WMI_PMKID;
++
++/*
++ * WMI_SET_PMKID_LIST_CMD
++ */
++#define WMI_MAX_PMKID_CACHE   8
++
++typedef PREPACK struct {
++    A_UINT32    numPMKID;
++    WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
++} POSTPACK WMI_SET_PMKID_LIST_CMD;
++
++/*
++ * WMI_GET_PMKID_LIST_CMD  Reply
++ * Following the Number of PMKIDs is the list of PMKIDs
++ */
++typedef PREPACK struct {
++    A_UINT32    numPMKID;
++    WMI_PMKID   pmkidList[1];
++} POSTPACK WMI_PMKID_LIST_REPLY;
++
++/* index used for priority streams */
++typedef enum {
++    WMI_NOT_MAPPED  = -1,
++    WMI_CONTROL_PRI = 0,
++    WMI_BEST_EFFORT_PRI = 1,
++    WMI_LOW_PRI = 2,
++    WMI_HIGH_PRI = 3,
++    WMI_HIGHEST_PRI,
++    WMI_PRI_MAX_COUNT
++} WMI_PRI_STREAM_ID;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_H_ */
+diff --git a/drivers/ar6000/include/wmi_api.h b/drivers/ar6000/include/wmi_api.h
+new file mode 100644
+index 0000000..267edfd
+--- /dev/null
++++ b/drivers/ar6000/include/wmi_api.h
+@@ -0,0 +1,260 @@
++#ifndef _WMI_API_H_
++#define _WMI_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the definitions for the Wireless Module Interface (WMI).
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * IP QoS Field definitions according to 802.1p
++ */
++#define BEST_EFFORT_PRI         0
++#define BACKGROUND_PRI          1
++#define EXCELLENT_EFFORT_PRI    3
++#define CONTROLLED_LOAD_PRI     4
++#define VIDEO_PRI               5
++#define VOICE_PRI               6
++#define NETWORK_CONTROL_PRI     7
++#define MAX_NUM_PRI             8
++
++#define UNDEFINED_PRI           (0xff)
++
++/* simple mapping of IP TOS field to a WMI priority stream
++ * this mapping was taken from the original linux driver implementation
++ * The operation maps the following
++ *
++ *  */
++#define IP_TOS_TO_WMI_PRI(tos)  \
++    ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03))
++
++#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */
++
++
++struct wmi_t;
++
++void *wmi_init(void *devt);
++
++void wmi_qos_state_init(struct wmi_t *wmip);
++void wmi_shutdown(struct wmi_t *wmip);
++A_UINT16  wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8);
++A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType);
++A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_syncpoint(struct wmi_t *wmip);
++A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip);
++WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass);
++A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up);
++
++A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf);
++void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg);
++void wmi_free_allnodes(struct wmi_t *wmip);
++bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr);
++
++
++typedef enum {
++    NO_SYNC_WMIFLAG = 0,
++    SYNC_BEFORE_WMIFLAG,            /* transmit all queued data before cmd */
++    SYNC_AFTER_WMIFLAG,             /* any new data waits until cmd execs */
++    SYNC_BOTH_WMIFLAG,
++    END_WMIFLAG                     /* end marker */
++} WMI_SYNC_FLAG;
++
++A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++                      WMI_SYNC_FLAG flag);
++A_STATUS wmi_connect_cmd(struct wmi_t *wmip,
++                         NETWORK_TYPE netType,
++                         DOT11_AUTH_MODE dot11AuthMode,
++                         AUTH_MODE authMode,
++                         CRYPTO_TYPE pairwiseCrypto,
++                         A_UINT8 pairwiseCryptoLen,
++                         CRYPTO_TYPE groupCrypto,
++                         A_UINT8 groupCryptoLen,
++                         int ssidLength,
++                         A_UCHAR *ssid,
++                         A_UINT8 *bssid,
++                         A_UINT16 channel,
++                         A_UINT32 ctrl_flags);
++A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip,
++                           A_UINT8 *bssid,
++                           A_UINT16 channel);
++A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip);
++A_STATUS wmi_getrev_cmd(struct wmi_t *wmip);
++A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
++                           A_BOOL forceFgScan, A_BOOL isLegacy,
++                           A_UINT32 homeDwellTime, A_UINT32 forceScanInterval);
++A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
++                            A_UINT16 fg_end_sec, A_UINT16 bg_sec,
++                            A_UINT16 minact_chdw_msec,
++                            A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec,
++                            A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
++                            A_UINT32 max_dfsch_act_time);
++A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask);
++A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
++                            A_UINT8 ssidLength, A_UCHAR *ssid);
++A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons);
++A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons);
++A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
++                           A_UINT8 ieLen, A_UINT8 *ieInfo);
++A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode);
++A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
++                            A_UINT16 atim_windows, A_UINT16 timeout_value);
++A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
++                           A_UINT16 psPollNum, A_UINT16 dtimPolicy);
++A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout);
++A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber);
++A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream);
++A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID);
++A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate);
++A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip);
++A_INT8   wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate);
++A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip);
++A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
++                                   WMI_PHY_MODE mode, A_INT8 numChan,
++                                   A_UINT16 *channelList);
++
++A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip,
++                                       WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd);
++A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip,
++                                        WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd);
++A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip);
++A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip,
++                                      WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd);
++A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold);
++A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status);
++
++A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask);
++
++A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie,
++                                    A_UINT32 source);
++A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
++                                     A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
++                                     A_UINT32 valid);
++A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip);
++A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex,
++                        CRYPTO_TYPE keyType, A_UINT8 keyUsage,
++                        A_UINT8 keyLength,A_UINT8 *keyRSC,
++                        A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
++                        WMI_SYNC_FLAG sync_flag);
++A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk);
++A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip);
++A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex);
++A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip,
++                                 WMI_SET_AKMP_PARAMS_CMD *akmpParams);
++A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
++                                WMI_SET_PMKID_LIST_CMD *pmkInfo);
++A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM);
++A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip);
++A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on);
++A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid);
++A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex);
++A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en);
++A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
++                          A_BOOL set);
++A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop,
++                                   A_UINT8 eCWmin, A_UINT8 eCWmax,
++                                   A_UINT8 aifsn);
++A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
++                                  A_UINT8 trafficClass, A_UINT8 maxRetries,
++                                  A_UINT8 enableNotify);
++
++void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid);
++
++A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip);
++A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType);
++A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
++                               A_UINT8 size);
++A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
++                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
++                            A_UINT8 size);
++
++A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode);
++A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
++                              A_UINT8 frmType,
++                              A_UINT8 *dstMacAddr,
++                              A_UINT8 *bssid,
++                              A_UINT16 optIEDataLen,
++                              A_UINT8 *optIEData);
++
++A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl);
++A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize);
++A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen);
++A_UINT8  convert_userPriority_to_trafficClass(A_UINT8 userPriority);
++A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip);
++A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance);
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len);
++#endif
++
++A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status);
++A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd);
++
++
++/*
++ *  This function is used to configure the fix rates mask to the target.
++ */
++A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask);
++A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip);
++
++A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
++
++A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
++
++A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status);
++A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable);
++
++A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip);
++A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval);
++
++A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType,
++                           A_UINT8 ieLen,A_UINT8 *ieInfo);
++
++A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen);
++A_INT32 wmi_get_rate(A_INT8 rateindex);
++
++/*Wake on Wireless WMI commands*/
++A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd);
++A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd);
++A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd);
++A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size);
++A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_DEL_WOW_PATTERN_CMD *cmd);
++A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status);
++
++bss_t *
++wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
++				   A_UINT32 ssidLength, A_BOOL bIsWPA2);
++
++void
++wmi_node_return (struct wmi_t *wmip, bss_t *bss);
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_API_H_ */
+diff --git a/drivers/ar6000/include/wmix.h b/drivers/ar6000/include/wmix.h
+new file mode 100644
+index 0000000..8f12b5e
+--- /dev/null
++++ b/drivers/ar6000/include/wmix.h
+@@ -0,0 +1,233 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains extensions of the WMI protocol specified in the
++ * Wireless Module Interface (WMI).  It includes definitions of all
++ * extended commands and events.  Extensions include useful commands
++ * that are not directly related to wireless activities.  They may
++ * be hardware-specific, and they might not be supported on all
++ * implementations.
++ *
++ * Extended WMIX commands are encapsulated in a WMI message with
++ * cmd=WMI_EXTENSION_CMD.
++ *
++ */
++
++#ifndef _WMIX_H_
++#define _WMIX_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#include "dbglog.h"
++
++/*
++ * Extended WMI commands are those that are needed during wireless
++ * operation, but which are not really wireless commands.  This allows,
++ * for instance, platform-specific commands.  Extended WMI commands are
++ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
++ * Extended WMI events are similarly embedded in a WMI event message with
++ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
++ */
++typedef PREPACK struct {
++    A_UINT32    commandId;
++} POSTPACK WMIX_CMD_HDR;
++
++typedef enum {
++    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
++    WMIX_DSETDATA_REPLY_CMDID,
++    WMIX_GPIO_OUTPUT_SET_CMDID,
++    WMIX_GPIO_INPUT_GET_CMDID,
++    WMIX_GPIO_REGISTER_SET_CMDID,
++    WMIX_GPIO_REGISTER_GET_CMDID,
++    WMIX_GPIO_INTR_ACK_CMDID,
++    WMIX_HB_CHALLENGE_RESP_CMDID,
++    WMIX_DBGLOG_CFG_MODULE_CMDID,
++} WMIX_COMMAND_ID;
++
++typedef enum {
++    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
++    WMIX_DSETCLOSE_EVENTID,
++    WMIX_DSETDATAREQ_EVENTID,
++    WMIX_GPIO_INTR_EVENTID,
++    WMIX_GPIO_DATA_EVENTID,
++    WMIX_GPIO_ACK_EVENTID,
++    WMIX_HB_CHALLENGE_RESP_EVENTID,
++    WMIX_DBGLOG_EVENTID,
++} WMIX_EVENT_ID;
++
++/*
++ * =============DataSet support=================
++ */
++
++/*
++ * WMIX_DSETOPENREQ_EVENTID
++ * DataSet Open Request Event
++ */
++typedef PREPACK struct {
++    A_UINT32 dset_id;
++    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
++} POSTPACK WMIX_DSETOPENREQ_EVENT;
++
++/*
++ * WMIX_DSETCLOSE_EVENTID
++ * DataSet Close Event
++ */
++typedef PREPACK struct {
++    A_UINT32 access_cookie;
++} POSTPACK WMIX_DSETCLOSE_EVENT;
++
++/*
++ * WMIX_DSETDATAREQ_EVENTID
++ * DataSet Data Request Event
++ */
++typedef PREPACK struct {
++    A_UINT32 access_cookie;
++    A_UINT32 offset;
++    A_UINT32 length;
++    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
++} POSTPACK WMIX_DSETDATAREQ_EVENT;
++
++typedef PREPACK struct {
++    A_UINT32              status;
++    A_UINT32              targ_dset_handle;
++    A_UINT32              targ_reply_fn;
++    A_UINT32              targ_reply_arg;
++    A_UINT32              access_cookie;
++    A_UINT32              size;
++    A_UINT32              version;
++} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
++
++typedef PREPACK struct {
++    A_UINT32              status;
++    A_UINT32              targ_buf;
++    A_UINT32              targ_reply_fn;
++    A_UINT32              targ_reply_arg;
++    A_UINT32              length;
++    A_UINT8               buf[1];
++} POSTPACK WMIX_DSETDATA_REPLY_CMD;
++
++
++/*
++ * =============GPIO support=================
++ * All masks are 18-bit masks with bit N operating on GPIO pin N.
++ */
++
++#include "gpio.h"
++
++/*
++ * Set GPIO pin output state.
++ * In order for output to be driven, a pin must be enabled for output.
++ * This can be done during initialization through the GPIO Configuration
++ * DataSet, or during operation with the enable_mask.
++ *
++ * If a request is made to simultaneously set/clear or set/disable or
++ * clear/disable or disable/enable, results are undefined.
++ */
++typedef PREPACK struct {
++    A_UINT32              set_mask;             /* pins to set */
++    A_UINT32              clear_mask;           /* pins to clear */
++    A_UINT32              enable_mask;          /* pins to enable for output */
++    A_UINT32              disable_mask;         /* pins to disable/tristate */
++} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
++
++/*
++ * Set a GPIO register.  For debug/exceptional cases.
++ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
++ * platform-dependent header.
++ */
++typedef PREPACK struct {
++    A_UINT32              gpioreg_id;           /* GPIO register ID */
++    A_UINT32              value;                /* value to write */
++} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
++
++/* Get a GPIO register.  For debug/exceptional cases. */
++typedef PREPACK struct {
++    A_UINT32              gpioreg_id;           /* GPIO register to read */
++} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
++
++/*
++ * Host acknowledges and re-arms GPIO interrupts.  A single
++ * message should be used to acknowledge all interrupts that
++ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
++ */
++typedef PREPACK struct {
++    A_UINT32              ack_mask;             /* interrupts to acknowledge */
++} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
++
++/*
++ * Target informs Host of GPIO interrupts that have ocurred since the
++ * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
++ * the current GPIO input values is provided -- in order to support
++ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
++ */
++typedef PREPACK struct {
++    A_UINT32              intr_mask;            /* pending GPIO interrupts */
++    A_UINT32              input_values;         /* recent GPIO input values */
++} POSTPACK WMIX_GPIO_INTR_EVENT;
++
++/*
++ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
++ * using a GPIO_DATA_EVENT with
++ *   value set to the mask of GPIO pin inputs and
++ *   reg_id set to GPIO_ID_NONE
++ *
++ *
++ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
++ * using a GPIO_DATA_EVENT with
++ *   value set to the value of the requested register and
++ *   reg_id identifying the register (reflects the original request)
++ * NB: reg_id supports the future possibility of unsolicited
++ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
++ * simplify Host GPIO support.
++ */
++typedef PREPACK struct {
++    A_UINT32              value;
++    A_UINT32              reg_id;
++} POSTPACK WMIX_GPIO_DATA_EVENT;
++
++/*
++ * =============Error Detection support=================
++ */
++
++/*
++ * WMIX_HB_CHALLENGE_RESP_CMDID
++ * Heartbeat Challenge Response command
++ */
++typedef PREPACK struct {
++    A_UINT32              cookie;
++    A_UINT32              source;
++} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
++
++/*
++ * WMIX_HB_CHALLENGE_RESP_EVENTID
++ * Heartbeat Challenge Response Event
++ */
++#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
++
++typedef PREPACK struct {
++    struct dbglog_config_s config;
++} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMIX_H_ */
+diff --git a/drivers/ar6000/miscdrv/common_drv.c b/drivers/ar6000/miscdrv/common_drv.c
+new file mode 100644
+index 0000000..4f12734
+--- /dev/null
++++ b/drivers/ar6000/miscdrv/common_drv.c
+@@ -0,0 +1,467 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "targaddrs.h"
++#include "a_osapi.h"
++#include "hif.h"
++#include "htc_api.h"
++#include "bmi.h"
++#include "bmi_msg.h"
++#include "common_drv.h"
++#include "a_debug.h"
++#include "targaddrs.h"
++
++#define HOST_INTEREST_ITEM_ADDRESS(target, item)    \
++(((TargetType) == TARGET_TYPE_AR6001) ?     \
++   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
++   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
++
++
++/* Compile the 4BYTE version of the window register setup routine,
++ * This mitigates host interconnect issues with non-4byte aligned bus requests, some
++ * interconnects use bus adapters that impose strict limitations.
++ * Since diag window access is not intended for performance critical operations, the 4byte mode should
++ * be satisfactory even though it generates 4X the bus activity. */
++
++#ifdef USE_4BYTE_REGISTER_ACCESS
++
++    /* set the window address register (using 4-byte register access ). */
++A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
++{
++    A_STATUS status;
++    A_UINT8 addrValue[4];
++    int i;
++
++        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
++         * last to initiate the access cycle */
++
++    for (i = 1; i <= 3; i++) {
++            /* fill the buffer with the address byte value we want to hit 4 times*/
++        addrValue[0] = ((A_UINT8 *)&Address)[i];
++        addrValue[1] = addrValue[0];
++        addrValue[2] = addrValue[0];
++        addrValue[3] = addrValue[0];
++
++            /* hit each byte of the register address with a 4-byte write operation to the same address,
++             * this is a harmless operation */
++        status = HIFReadWrite(hifDevice,
++                              RegisterAddr+i,
++                              addrValue,
++                              4,
++                              HIF_WR_SYNC_BYTE_FIX,
++                              NULL);
++        if (status != A_OK) {
++            break;
++        }
++    }
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
++             RegisterAddr, Address));
++        return status;
++    }
++
++        /* write the address register again, this time write the whole 4-byte value.
++         * The effect here is that the LSB write causes the cycle to start, the extra
++         * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr,
++                          (A_UCHAR *)(&Address),
++                          4,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
++            RegisterAddr, Address));
++        return status;
++    }
++
++    return A_OK;
++
++
++
++}
++
++
++#else
++
++    /* set the window address register */
++A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
++{
++    A_STATUS status;
++
++        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
++         * last to initiate the access cycle */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr+1,  /* write upper 3 bytes */
++                          ((A_UCHAR *)(&Address))+1,
++                          sizeof(A_UINT32)-1,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
++             RegisterAddr, Address));
++        return status;
++    }
++
++        /* write the LSB of the register, this initiates the operation */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr,
++                          (A_UCHAR *)(&Address),
++                          sizeof(A_UINT8),
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
++            RegisterAddr, Address));
++        return status;
++    }
++
++    return A_OK;
++}
++
++#endif
++
++/*
++ * Read from the AR6000 through its diagnostic window.
++ * No cooperation from the Target is required for this.
++ */
++A_STATUS
++ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
++{
++    A_STATUS status;
++
++        /* set window register to start read cycle */
++    status = ar6000_SetAddressWindowRegister(hifDevice,
++                                             WINDOW_READ_ADDR_ADDRESS,
++                                             *address);
++
++    if (status != A_OK) {
++        return status;
++    }
++
++        /* read the data */
++    status = HIFReadWrite(hifDevice,
++                          WINDOW_DATA_ADDRESS,
++                          (A_UCHAR *)data,
++                          sizeof(A_UINT32),
++                          HIF_RD_SYNC_BYTE_INC,
++                          NULL);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
++        return status;
++    }
++
++    return status;
++}
++
++
++/*
++ * Write to the AR6000 through its diagnostic window.
++ * No cooperation from the Target is required for this.
++ */
++A_STATUS
++ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
++{
++    A_STATUS status;
++
++        /* set write data */
++    status = HIFReadWrite(hifDevice,
++                          WINDOW_DATA_ADDRESS,
++                          (A_UCHAR *)data,
++                          sizeof(A_UINT32),
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
++        return status;
++    }
++
++        /* set window register, which starts the write cycle */
++    return ar6000_SetAddressWindowRegister(hifDevice,
++                                           WINDOW_WRITE_ADDR_ADDRESS,
++                                           *address);
++}
++
++A_STATUS
++ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                    A_UCHAR *data, A_UINT32 length)
++{
++    A_UINT32 count;
++    A_STATUS status = A_OK;
++
++    for (count = 0; count < length; count += 4, address += 4) {
++        if ((status = ar6000_ReadRegDiag(hifDevice, &address,
++                                         (A_UINT32 *)&data[count])) != A_OK)
++        {
++            break;
++        }
++    }
++
++    return status;
++}
++
++A_STATUS
++ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                     A_UCHAR *data, A_UINT32 length)
++{
++    A_UINT32 count;
++    A_STATUS status = A_OK;
++
++    for (count = 0; count < length; count += 4, address += 4) {
++        if ((status = ar6000_WriteRegDiag(hifDevice, &address,
++                                          (A_UINT32 *)&data[count])) != A_OK)
++        {
++            break;
++        }
++    }
++
++    return status;
++}
++
++A_STATUS
++ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice)
++{
++    int i;
++    struct forceROM_s {
++        A_UINT32 addr;
++        A_UINT32 data;
++    };
++    struct forceROM_s *ForceROM;
++    int szForceROM;
++    A_UINT32 instruction;
++
++    static struct forceROM_s ForceROM_REV2[] = {
++        /* NB: This works for old REV2 ROM (old). */
++        {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */
++        {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */
++
++        {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */
++        {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */
++        {MC_REMAP_SIZE_ADDRESS, 0x00000000},   /* ...1 cache line */
++        {MC_REMAP_VALID_ADDRESS, 0x00000001},  /* ...remap is valid */
++
++        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
++
++        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
++    };
++
++    static struct forceROM_s ForceROM_NEW[] = {
++        /* NB: This works for AR6000 ROM REV3 and beyond.  */
++        {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH},
++        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
++        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
++    };
++
++    /*
++     * Examine a semi-arbitrary instruction that's different
++     * in REV2 and other revisions.
++     * NB: If a Host port does not require simultaneous support
++     * for multiple revisions of Target ROM, this code can be elided.
++     */
++    (void)ar6000_ReadDataDiag(hifDevice, 0x01000040,
++                              (A_UCHAR *)&instruction, 4);
++
++    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction));
++
++    if (instruction == 0x3c1aa200) {
++        /* It's an old ROM */
++        ForceROM = ForceROM_REV2;
++        szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM);
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n"));
++    } else {
++        ForceROM = ForceROM_NEW;
++        szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n"));
++    }
++
++    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n"));
++    for (i = 0; i < szForceROM; i++)
++    {
++        if (ar6000_WriteRegDiag(hifDevice,
++                                &ForceROM[i].addr,
++                                &ForceROM[i].data) != A_OK)
++        {
++            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
++            return A_ERROR;
++        }
++    }
++
++    msleep(50); /* delay to allow dragon to come to BMI phase  */
++    return A_OK;
++}
++
++/* reset device */
++A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
++{
++
++#if !defined(DWSIM)
++    A_STATUS status = A_OK;
++    A_UINT32 address;
++    A_UINT32 data;
++
++    do {
++
++        // address = RESET_CONTROL_ADDRESS;
++        data = RESET_CONTROL_COLD_RST_MASK;
++
++          /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */
++        if (TargetType == TARGET_TYPE_AR6001) {
++            address = 0x0C000000;
++        } else {
++            if (TargetType == TARGET_TYPE_AR6002) {
++                address = 0x00004000;
++            } else {
++                A_ASSERT(0);
++            }
++        }
++
++        status = ar6000_WriteRegDiag(hifDevice, &address, &data);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        /*
++         * Read back the RESET CAUSE register to ensure that the cold reset
++         * went through.
++         */
++        msleep(2000); /* 2 second delay to allow things to settle down */
++
++
++        // address = RESET_CAUSE_ADDRESS;
++        /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */
++        if (TargetType == TARGET_TYPE_AR6001) {
++            address = 0x0C0000CC;
++        } else {
++            if (TargetType == TARGET_TYPE_AR6002) {
++                address = 0x000040C0;
++            } else {
++                A_ASSERT(0);
++            }
++        }
++
++        data = 0;
++        status = ar6000_ReadRegDiag(hifDevice, &address, &data);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data));
++        data &= RESET_CAUSE_LAST_MASK;
++        if (data != 2) {
++            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n"));
++        }
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n"));
++    }
++#endif
++    return A_OK;
++}
++
++#define REG_DUMP_COUNT_AR6001   38  /* WORDs, derived from AR6001_regdump.h */
++#define REG_DUMP_COUNT_AR6002   32  /* WORDs, derived from AR6002_regdump.h */
++
++
++#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002
++#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6002
++#else
++#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6001
++#endif
++
++void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
++{
++    A_UINT32 address;
++    A_UINT32 regDumpArea = 0;
++    A_STATUS status;
++    A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX];
++    A_UINT32 regDumpCount = 0;
++    A_UINT32 i;
++
++    do {
++
++            /* the reg dump pointer is copied to the host interest area */
++        address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state);
++
++        if (TargetType == TARGET_TYPE_AR6001) {
++                /* for AR6001, this is a fixed location because the ptr is actually stuck in cache,
++                 * this may be fixed in later firmware versions */
++            address = 0x18a0;
++            regDumpCount = REG_DUMP_COUNT_AR6001;
++
++        } else  if (TargetType == TARGET_TYPE_AR6002) {
++
++            regDumpCount = REG_DUMP_COUNT_AR6002;
++
++        } else {
++            A_ASSERT(0);
++        }
++
++            /* read RAM location through diagnostic window */
++        status = ar6000_ReadRegDiag(hifDevice, &address, &regDumpArea);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea));
++
++        if (regDumpArea == 0) {
++                /* no reg dump */
++            break;
++        }
++
++        if (TargetType == TARGET_TYPE_AR6001) {
++            regDumpArea &= 0x0FFFFFFF;  /* convert to physical address in target memory */
++        }
++
++            /* fetch register dump data */
++        status = ar6000_ReadDataDiag(hifDevice,
++                                     regDumpArea,
++                                     (A_UCHAR *)&regDumpValues[0],
++                                     regDumpCount * (sizeof(A_UINT32)));
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n"));
++
++        for (i = 0; i < regDumpCount; i++) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d :  0x%8.8X \n",i, regDumpValues[i]));
++        }
++
++    } while (FALSE);
++
++}
++
+diff --git a/drivers/ar6000/miscdrv/credit_dist.c b/drivers/ar6000/miscdrv/credit_dist.c
+new file mode 100644
+index 0000000..8d37d62
+--- /dev/null
++++ b/drivers/ar6000/miscdrv/credit_dist.c
+@@ -0,0 +1,346 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "htc_api.h"
++#include "common_drv.h"
++
++/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/
++
++#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */
++
++#ifdef NO_VO_SERVICE
++#define DATA_SVCS_USED 3
++#else
++#define DATA_SVCS_USED 4
++#endif
++
++static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
++
++static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                        HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
++
++/* reduce an ep's credits back to a set limit */
++static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST  *pEpDist,
++                                int                       Limit)
++{
++    int credits;
++
++        /* set the new limit */
++    pEpDist->TxCreditsAssigned = Limit;
++
++    if (pEpDist->TxCredits <= Limit) {
++        return;
++    }
++
++        /* figure out how much to take away */
++    credits = pEpDist->TxCredits - Limit;
++        /* take them away */
++    pEpDist->TxCredits -= credits;
++    pCredInfo->CurrentFreeCredits += credits;
++}
++
++/* give an endpoint some credits from the free credit pool */
++#define GiveCredits(pCredInfo,pEpDist,credits)      \
++{                                                   \
++    (pEpDist)->TxCredits += (credits);              \
++    (pEpDist)->TxCreditsAssigned += (credits);      \
++    (pCredInfo)->CurrentFreeCredits -= (credits);   \
++}
++
++
++/* default credit init callback.
++ * This function is called in the context of HTCStart() to setup initial (application-specific)
++ * credit distributions */
++static void ar6000_credit_init(void                     *Context,
++                               HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                               int                      TotalCredits)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      count;
++    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
++
++    pCredInfo->CurrentFreeCredits = TotalCredits;
++    pCredInfo->TotalAvailableCredits = TotalCredits;
++
++    pCurEpDist = pEPList;
++
++        /* run through the list and initialize */
++    while (pCurEpDist != NULL) {
++
++            /* set minimums for each endpoint */
++        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
++
++        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
++                /* give control service some credits */
++            GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin);
++                /* control service is always marked active, it never goes inactive EVER */
++            SET_EP_ACTIVE(pCurEpDist);
++        } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) {
++                /* this is the lowest priority data endpoint, save this off for easy access */
++            pCredInfo->pLowestPriEpDist = pCurEpDist;
++        }
++
++        /* Streams have to be created (explicit | implicit)for all kinds
++         * of traffic. BE endpoints are also inactive in the beginning.
++         * When BE traffic starts it creates implicit streams that
++         * redistributes credits.
++         */
++
++        /* note, all other endpoints have minimums set but are initially given NO credits.
++         * Credits will be distributed as traffic activity demands */
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++    if (pCredInfo->CurrentFreeCredits <= 0) {
++        AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits));
++        A_ASSERT(FALSE);
++        return;
++    }
++
++        /* reset list */
++    pCurEpDist = pEPList;
++        /* now run through the list and set max operating credit limits for everyone */
++    while (pCurEpDist != NULL) {
++        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
++                /* control service max is just 1 max message */
++            pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg;
++        } else {
++                /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are
++                 * the same.
++                 * We use a simple calculation here, we take the remaining credits and
++                 * determine how many max messages this can cover and then set each endpoint's
++                 * normal value equal to half this amount.
++                 * */
++            count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg;
++            count = count >> 1;
++            count = max(count,pCurEpDist->TxCreditsPerMaxMsg);
++                /* set normal */
++            pCurEpDist->TxCreditsNorm = count;
++
++        }
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++}
++
++
++/* default credit distribution callback
++ * This callback is invoked whenever endpoints require credit distributions.
++ * A lock is held while this function is invoked, this function shall NOT block.
++ * The pEPDistList is a list of distribution structures in prioritized order as
++ * defined by the call to the HTCSetCreditDistribution() api.
++ *
++ */
++static void ar6000_credit_distribute(void                     *Context,
++                                     HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
++                                     HTC_CREDIT_DIST_REASON   Reason)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
++
++    switch (Reason) {
++        case HTC_CREDIT_DIST_SEND_COMPLETE :
++            pCurEpDist = pEPDistList;
++                /* we are given the start of the endpoint distribution list.
++                 * There may be one or more endpoints to service.
++                 * Run through the list and distribute credits */
++            while (pCurEpDist != NULL) {
++
++                if (pCurEpDist->TxCreditsToDist > 0) {
++                        /* return the credits back to the endpoint */
++                    pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
++                        /* always zero out when we are done */
++                    pCurEpDist->TxCreditsToDist = 0;
++
++                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) {
++                            /* reduce to the assigned limit, previous credit reductions
++                             * could have caused the limit to change */
++                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned);
++                    }
++
++                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) {
++                            /* oversubscribed endpoints need to reduce back to normal */
++                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm);
++                    }
++                }
++
++                pCurEpDist = pCurEpDist->pNext;
++            }
++
++            A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
++
++            break;
++
++        case HTC_CREDIT_DIST_ACTIVITY_CHANGE :
++            RedistributeCredits(pCredInfo,pEPDistList);
++            break;
++        case HTC_CREDIT_DIST_SEEK_CREDITS :
++            SeekCredits(pCredInfo,pEPDistList);
++            break;
++        case HTC_DUMP_CREDIT_STATE :
++            AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n",
++            								pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits));
++            break;
++        default:
++            break;
++
++    }
++
++}
++
++/* redistribute credits based on activity change */
++static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList;
++
++        /* walk through the list and remove credits from inactive endpoints */
++    while (pCurEpDist != NULL) {
++
++        if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) {
++            if (!IS_EP_ACTIVE(pCurEpDist)) {
++                    /* EP is inactive, reduce credits back to zero */
++                ReduceCredits(pCredInfo, pCurEpDist, 0);
++            }
++        }
++
++        /* NOTE in the active case, we do not need to do anything further,
++         * when an EP goes active and needs credits, HTC will call into
++         * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS  */
++
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++    A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
++
++}
++
++/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */
++static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                        HTC_ENDPOINT_CREDIT_DIST *pEPDist)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      credits = 0;
++    int                      need;
++
++    do {
++
++        if (pEPDist->ServiceID == WMI_CONTROL_SVC) {
++                /* we never oversubscribe on the control service, this is not
++                 * a high performance path and the target never holds onto control
++                 * credits for too long */
++            break;
++        }
++
++        /* for all other services, we follow a simple algorithm of
++         * 1. checking the free pool for credits
++         * 2. checking lower priority endpoints for credits to take */
++
++        if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) {
++                /* try to give more credits than it needs */
++            credits = 2 * pEPDist->TxCreditsSeek;
++        } else {
++                /* give what we can */
++            credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
++        }
++
++        if (credits >= pEPDist->TxCreditsSeek) {
++                /* we found some to fullfill the seek request */
++            break;
++        }
++
++        /* we don't have enough in the free pool, try taking away from lower priority services
++         *
++         * The rule for taking away credits:
++         *   1. Only take from lower priority endpoints
++         *   2. Only take what is allocated above the minimum (never starve an endpoint completely)
++         *   3. Only take what you need.
++         *
++         * */
++
++            /* starting at the lowest priority */
++        pCurEpDist = pCredInfo->pLowestPriEpDist;
++
++            /* work backwards until we hit the endpoint again */
++        while (pCurEpDist != pEPDist) {
++                /* calculate how many we need so far */
++            need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits;
++
++            if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) {
++                    /* the current one has been allocated more than it's minimum and it
++                     * has enough credits assigned above it's minimum to fullfill our need
++                     * try to take away just enough to fullfill our need */
++                ReduceCredits(pCredInfo,
++                              pCurEpDist,
++                              pCurEpDist->TxCreditsAssigned - need);
++
++                if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) {
++                        /* we have enough */
++                    break;
++                }
++            }
++
++            pCurEpDist = pCurEpDist->pPrev;
++        }
++
++            /* return what we can get */
++        credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
++
++    } while (FALSE);
++
++        /* did we find some credits? */
++    if (credits) {
++            /* give what we can */
++        GiveCredits(pCredInfo, pEPDist, credits);
++    }
++
++}
++
++/* initialize and setup credit distribution */
++A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo)
++{
++    HTC_SERVICE_ID servicepriority[5];
++
++    A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO));
++
++    servicepriority[0] = WMI_CONTROL_SVC;  /* highest */
++    servicepriority[1] = WMI_DATA_VO_SVC;
++    servicepriority[2] = WMI_DATA_VI_SVC;
++    servicepriority[3] = WMI_DATA_BE_SVC;
++    servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
++
++        /* set callbacks and priority list */
++    HTCSetCreditDistribution(HTCHandle,
++                             pCredInfo,
++                             ar6000_credit_distribute,
++                             ar6000_credit_init,
++                             servicepriority,
++                             5);
++
++    return A_OK;
++}
++
+diff --git a/drivers/ar6000/wlan/wlan_node.c b/drivers/ar6000/wlan/wlan_node.c
+new file mode 100644
+index 0000000..b124845
+--- /dev/null
++++ b/drivers/ar6000/wlan/wlan_node.c
+@@ -0,0 +1,371 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2004-2005 Atheros Communications
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ *    derived from this software without specific prior written permission.
++ *
++ * Alternatively, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2 as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $
++ */
++/*
++ * IEEE 802.11 node handling support.
++ */
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++#include <a_debug.h>
++#include <ieee80211.h>
++#include <wlan_api.h>
++#include <ieee80211_node.h>
++#include <htc_api.h>
++#include <wmi.h>
++#include <wmi_api.h>
++
++static void wlan_node_timeout(A_ATH_TIMER arg);
++static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt,
++                                    const A_UINT8 *macaddr);
++
++bss_t *
++wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size)
++{
++    bss_t *ni;
++
++    ni = A_MALLOC_NOWAIT(sizeof(bss_t));
++
++    if (ni != NULL) {
++        ni->ni_buf = A_MALLOC_NOWAIT(wh_size);
++        if (ni->ni_buf == NULL) {
++            A_FREE(ni);
++            ni = NULL;
++            return ni;
++        }
++    } else {
++        return ni;
++    }
++
++    /* Make sure our lists are clean */
++    ni->ni_list_next = NULL;
++    ni->ni_list_prev = NULL;
++    ni->ni_hash_next = NULL;
++    ni->ni_hash_prev = NULL;
++
++    //
++    // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified
++    // that some junk has been stored in this, due to this scan list didn't properly updated
++    //
++    ni->ni_scangen	 = 0;
++
++    return ni;
++}
++
++void
++wlan_node_free(bss_t *ni)
++{
++    if (ni->ni_buf != NULL) {
++        A_FREE(ni->ni_buf);
++    }
++    A_FREE(ni);
++}
++
++void
++wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
++                const A_UINT8 *macaddr)
++{
++    int hash;
++
++    A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN);
++    hash = IEEE80211_NODE_HASH(macaddr);
++    ieee80211_node_initref(ni);     /* mark referenced */
++
++    ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC);
++    IEEE80211_NODE_LOCK_BH(nt);
++
++    /* Insert at the end of the node list */
++    ni->ni_list_next = NULL;
++    ni->ni_list_prev = nt->nt_node_last;
++    if(nt->nt_node_last != NULL)
++    {
++        nt->nt_node_last->ni_list_next = ni;
++    }
++    nt->nt_node_last = ni;
++    if(nt->nt_node_first == NULL)
++    {
++        nt->nt_node_first = ni;
++    }
++
++    /* Insert into the hash list i.e. the bucket */
++    if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL)
++    {
++        nt->nt_hash[hash]->ni_hash_prev = ni;
++    }
++    ni->ni_hash_prev = NULL;
++    nt->nt_hash[hash] = ni;
++
++    if (!nt->isTimerArmed) {
++        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
++        nt->isTimerArmed = TRUE;
++    }
++
++    IEEE80211_NODE_UNLOCK_BH(nt);
++}
++
++static bss_t *
++_ieee80211_find_node(struct ieee80211_node_table *nt,
++    const A_UINT8 *macaddr)
++{
++    bss_t *ni;
++    int hash;
++
++    IEEE80211_NODE_LOCK_ASSERT(nt);
++
++    hash = IEEE80211_NODE_HASH(macaddr);
++    for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) {
++        if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
++            ieee80211_node_incref(ni);  /* mark referenced */
++            return ni;
++        }
++    }
++    return NULL;
++}
++
++bss_t *
++wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr)
++{
++    bss_t *ni;
++
++    IEEE80211_NODE_LOCK(nt);
++    ni = _ieee80211_find_node(nt, macaddr);
++    IEEE80211_NODE_UNLOCK(nt);
++    return ni;
++}
++
++/*
++ * Reclaim a node.  If this is the last reference count then
++ * do the normal free work.  Otherwise remove it from the node
++ * table and mark it gone by clearing the back-reference.
++ */
++void
++wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni)
++{
++    IEEE80211_NODE_LOCK(nt);
++
++    if(ni->ni_list_prev == NULL)
++    {
++        /* First in list so fix the list head */
++        nt->nt_node_first = ni->ni_list_next;
++    }
++    else
++    {
++        ni->ni_list_prev->ni_list_next = ni->ni_list_next;
++    }
++
++    if(ni->ni_list_next == NULL)
++    {
++        /* Last in list so fix list tail */
++        nt->nt_node_last = ni->ni_list_prev;
++    }
++    else
++    {
++        ni->ni_list_next->ni_list_prev = ni->ni_list_prev;
++    }
++
++    if(ni->ni_hash_prev == NULL)
++    {
++        /* First in list so fix the list head */
++        int hash;
++        hash = IEEE80211_NODE_HASH(ni->ni_macaddr);
++        nt->nt_hash[hash] = ni->ni_hash_next;
++    }
++    else
++    {
++        ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next;
++    }
++
++    if(ni->ni_hash_next != NULL)
++    {
++        ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev;
++    }
++    wlan_node_free(ni);
++
++    IEEE80211_NODE_UNLOCK(nt);
++}
++
++static void
++wlan_node_dec_free(bss_t *ni)
++{
++    if (ieee80211_node_dectestref(ni)) {
++        wlan_node_free(ni);
++    }
++}
++
++void
++wlan_free_allnodes(struct ieee80211_node_table *nt)
++{
++    bss_t *ni;
++
++    while ((ni = nt->nt_node_first) != NULL) {
++        wlan_node_reclaim(nt, ni);
++    }
++}
++
++void
++wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
++                   void *arg)
++{
++    bss_t *ni;
++    A_UINT32 gen;
++
++    gen = ++nt->nt_scangen;
++
++    IEEE80211_NODE_LOCK(nt);
++    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
++        if (ni->ni_scangen != gen) {
++            ni->ni_scangen = gen;
++            (void) ieee80211_node_incref(ni);
++            (*f)(arg, ni);
++            wlan_node_dec_free(ni);
++        }
++    }
++    IEEE80211_NODE_UNLOCK(nt);
++}
++
++/*
++ * Node table support.
++ */
++void
++wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt)
++{
++    int i;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt));
++    IEEE80211_NODE_LOCK_INIT(nt);
++
++    nt->nt_node_first = nt->nt_node_last = NULL;
++    for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++)
++    {
++        nt->nt_hash[i] = NULL;
++    }
++    A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt);
++    nt->isTimerArmed = FALSE;
++    nt->nt_wmip = wmip;
++}
++
++static void
++wlan_node_timeout(A_ATH_TIMER arg)
++{
++    struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg;
++    bss_t *bss, *nextBss;
++    A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE;
++
++    wmi_get_current_bssid(nt->nt_wmip, myBssid);
++
++    bss = nt->nt_node_first;
++    while (bss != NULL)
++    {
++        nextBss = bss->ni_list_next;
++        if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0)
++        {
++
++            if (bss->ni_tstamp <= A_GET_MS(0))
++            {
++               /*
++                * free up all but the current bss - if set
++                */
++                wlan_node_reclaim(nt, bss);
++            }
++            else
++            {
++                /*
++                 * Re-arm timer, only when we have a bss other than
++                 * current bss AND it is not aged-out.
++                 */
++                reArmTimer = TRUE;
++            }
++        }
++        bss = nextBss;
++    }
++
++    if(reArmTimer)
++        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
++
++    nt->isTimerArmed = reArmTimer;
++}
++
++void
++wlan_node_table_cleanup(struct ieee80211_node_table *nt)
++{
++    A_UNTIMEOUT(&nt->nt_inact_timer);
++    A_DELETE_TIMER(&nt->nt_inact_timer);
++    wlan_free_allnodes(nt);
++    IEEE80211_NODE_LOCK_DESTROY(nt);
++}
++
++bss_t *
++wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
++					A_UINT32 ssidLength, A_BOOL bIsWPA2)
++{
++    bss_t   *ni = NULL;
++	A_UCHAR *pIESsid = NULL;
++
++    IEEE80211_NODE_LOCK (nt);
++
++    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
++		pIESsid = ni->ni_cie.ie_ssid;
++		if (pIESsid[1] <= 32) {
++
++			// Step 1 : Check SSID
++			if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) {
++
++				// Step 2 : if SSID matches, check WPA or WPA2
++				if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) {
++					ieee80211_node_incref (ni);  /* mark referenced */
++					IEEE80211_NODE_UNLOCK (nt);
++					return ni;
++				}
++				if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) {
++					ieee80211_node_incref(ni);  /* mark referenced */
++					IEEE80211_NODE_UNLOCK (nt);
++					return ni;
++				}
++			}
++		}
++    }
++
++    IEEE80211_NODE_UNLOCK (nt);
++
++    return NULL;
++}
++
++void
++wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni)
++{
++	IEEE80211_NODE_LOCK (nt);
++	wlan_node_dec_free (ni);
++	IEEE80211_NODE_UNLOCK (nt);
++}
+diff --git a/drivers/ar6000/wlan/wlan_recv_beacon.c b/drivers/ar6000/wlan/wlan_recv_beacon.c
+new file mode 100644
+index 0000000..15beabb
+--- /dev/null
++++ b/drivers/ar6000/wlan/wlan_recv_beacon.c
+@@ -0,0 +1,192 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ *    derived from this software without specific prior written permission.
++ *
++ * Alternatively, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2 as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++/*
++ * IEEE 802.11 input handling.
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include <wmi.h>
++#include <ieee80211.h>
++#include <wlan_api.h>
++
++#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do {         \
++    if ((_len) < (_minlen)) {                   \
++        return A_EINVAL;                         \
++    }                               \
++} while (0)
++
++#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do {         \
++    if ((__elem) == NULL) {                     \
++        return A_EINVAL;                         \
++    }                               \
++    if ((__elem)[1] > (__maxlen)) {                 \
++        return A_EINVAL;                         \
++    }                               \
++} while (0)
++
++
++/* unaligned little endian access */
++#define LE_READ_2(p)                            \
++    ((A_UINT16)                            \
++     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8)))
++
++#define LE_READ_4(p)                            \
++    ((A_UINT32)                            \
++     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8) | \
++      (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24)))
++
++
++static int __inline
++iswpaoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
++}
++
++static int __inline
++iswmmoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI);
++}
++
++static int __inline
++iswmmparam(const A_UINT8 *frm)
++{
++    return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE;
++}
++
++static int __inline
++iswmminfo(const A_UINT8 *frm)
++{
++    return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE;
++}
++
++static int __inline
++isatherosoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
++}
++
++static int __inline
++iswscoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI);
++}
++
++A_STATUS
++wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie)
++{
++    A_UINT8 *frm, *efrm;
++
++    frm = buf;
++    efrm = (A_UINT8 *) (frm + framelen);
++
++    /*
++     * beacon/probe response frame format
++     *  [8] time stamp
++     *  [2] beacon interval
++     *  [2] capability information
++     *  [tlv] ssid
++     *  [tlv] supported rates
++     *  [tlv] country information
++     *  [tlv] parameter set (FH/DS)
++     *  [tlv] erp information
++     *  [tlv] extended supported rates
++     *  [tlv] WMM
++     *  [tlv] WPA or RSN
++     *  [tlv] Atheros Advanced Capabilities
++     */
++    IEEE80211_VERIFY_LENGTH(efrm - frm, 12);
++    A_MEMZERO(cie, sizeof(*cie));
++
++    cie->ie_tstamp = frm; frm += 8;
++    cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
++    cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
++    cie->ie_chan = 0;
++
++    while (frm < efrm) {
++        switch (*frm) {
++        case IEEE80211_ELEMID_SSID:
++            cie->ie_ssid = frm;
++            break;
++        case IEEE80211_ELEMID_RATES:
++            cie->ie_rates = frm;
++            break;
++        case IEEE80211_ELEMID_COUNTRY:
++            cie->ie_country = frm;
++            break;
++        case IEEE80211_ELEMID_FHPARMS:
++            break;
++        case IEEE80211_ELEMID_DSPARMS:
++            cie->ie_chan = frm[2];
++            break;
++        case IEEE80211_ELEMID_TIM:
++            cie->ie_tim = frm;
++            break;
++        case IEEE80211_ELEMID_IBSSPARMS:
++            break;
++        case IEEE80211_ELEMID_XRATES:
++            cie->ie_xrates = frm;
++            break;
++        case IEEE80211_ELEMID_ERP:
++            if (frm[1] != 1) {
++                //A_PRINTF("Discarding ERP Element - Bad Len\n");
++                return A_EINVAL;
++            }
++            cie->ie_erp = frm[2];
++            break;
++        case IEEE80211_ELEMID_RSN:
++            cie->ie_rsn = frm;
++            break;
++        case IEEE80211_ELEMID_VENDOR:
++            if (iswpaoui(frm)) {
++                cie->ie_wpa = frm;
++            } else if (iswmmoui(frm)) {
++                cie->ie_wmm = frm;
++            } else if (isatherosoui(frm)) {
++                cie->ie_ath = frm;
++            } else if(iswscoui(frm)) {
++                cie->ie_wsc = frm;
++            }
++            break;
++        default:
++            break;
++        }
++        frm += frm[1] + 2;
++    }
++    IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE);
++    IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN);
++
++    return A_OK;
++}
+diff --git a/drivers/ar6000/wlan/wlan_utils.c b/drivers/ar6000/wlan/wlan_utils.c
+new file mode 100644
+index 0000000..fd5aac9
+--- /dev/null
++++ b/drivers/ar6000/wlan/wlan_utils.c
+@@ -0,0 +1,59 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This module implements frequently used wlan utilies
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++
++/*
++ * converts ieee channel number to frequency
++ */
++A_UINT16
++wlan_ieee2freq(int chan)
++{
++    if (chan == 14) {
++        return 2484;
++    }
++    if (chan < 14) {    /* 0-13 */
++        return (2407 + (chan*5));
++    }
++    if (chan < 27) {    /* 15-26 */
++        return (2512 + ((chan-15)*20));
++    }
++    return (5000 + (chan*5));
++}
++
++/*
++ * Converts MHz frequency to IEEE channel number.
++ */
++A_UINT32
++wlan_freq2ieee(A_UINT16 freq)
++{
++    if (freq == 2484)
++        return 14;
++    if (freq < 2484)
++        return (freq - 2407) / 5;
++    if (freq < 5000)
++        return 15 + ((freq - 2512) / 20);
++    return (freq - 5000) / 5;
++}
+diff --git a/drivers/ar6000/wmi/wmi.c b/drivers/ar6000/wmi/wmi.c
+new file mode 100644
+index 0000000..d322cf3
+--- /dev/null
++++ b/drivers/ar6000/wmi/wmi.c
+@@ -0,0 +1,3954 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This module implements the hardware independent layer of the
++ * Wireless Module Interface (WMI) protocol.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++#include "htc.h"
++#include "htc_api.h"
++#include "wmi.h"
++#include <ieee80211.h>
++#include <ieee80211_node.h>
++#include <wlan_api.h>
++#include <wmi_api.h>
++#include "dset_api.h"
++#include "gpio_api.h"
++#include "wmi_host.h"
++#include "a_drv.h"
++#include "a_drv_api.h"
++#include "a_debug.h"
++#include "dbglog_api.h"
++
++static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                        int len);
++static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                        int len);
++static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                       int len);
++static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_sync_point(struct wmi_t *wmip);
++
++static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                         int len);
++static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                       int len);
++static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                             int len);
++
++static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++#ifdef CONFIG_HOST_DSET_SUPPORT
++static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++
++static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS
++wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len);
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++#endif
++
++static A_STATUS
++wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_BOOL
++wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex);
++
++static A_STATUS
++wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++int wps_enable;
++static const A_INT32 wmi_rateTable[] = {
++    1000,
++    2000,
++    5500,
++    11000,
++    6000,
++    9000,
++    12000,
++    18000,
++    24000,
++    36000,
++    48000,
++    54000,
++    0};
++
++#define MODE_A_SUPPORT_RATE_START       4
++#define MODE_A_SUPPORT_RATE_STOP        11
++
++#define MODE_GONLY_SUPPORT_RATE_START   MODE_A_SUPPORT_RATE_START
++#define MODE_GONLY_SUPPORT_RATE_STOP    MODE_A_SUPPORT_RATE_STOP
++
++#define MODE_B_SUPPORT_RATE_START       0
++#define MODE_B_SUPPORT_RATE_STOP        3
++
++#define MODE_G_SUPPORT_RATE_START       0
++#define MODE_G_SUPPORT_RATE_STOP        11
++
++#define MAX_NUMBER_OF_SUPPORT_RATES     (MODE_G_SUPPORT_RATE_STOP + 1)
++
++/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */
++const A_UINT8 up_to_ac[]= {
++                WMM_AC_BE,
++                WMM_AC_BK,
++                WMM_AC_BK,
++                WMM_AC_BE,
++                WMM_AC_VI,
++                WMM_AC_VI,
++                WMM_AC_VO,
++                WMM_AC_VO,
++            };
++
++void *
++wmi_init(void *devt)
++{
++    struct wmi_t *wmip;
++
++    wmip = A_MALLOC(sizeof(struct wmi_t));
++    if (wmip == NULL) {
++        return (NULL);
++    }
++    A_MEMZERO(wmip, sizeof(*wmip));
++    A_MUTEX_INIT(&wmip->wmi_lock);
++    wmip->wmi_devt = devt;
++    wlan_node_table_init(wmip, &wmip->wmi_scan_table);
++    wmi_qos_state_init(wmip);
++    wmip->wmi_powerMode = REC_POWER;
++    wmip->wmi_phyMode = WMI_11G_MODE;
++
++    return (wmip);
++}
++
++void
++wmi_qos_state_init(struct wmi_t *wmip)
++{
++    A_UINT8 i;
++
++    if (wmip == NULL) {
++        return;
++    }
++    LOCK_WMI(wmip);
++
++    /* Initialize QoS States */
++    wmip->wmi_numQoSStream = 0;
++
++    wmip->wmi_fatPipeExists = 0;
++
++    for (i=0; i < WMM_NUM_AC; i++) {
++        wmip->wmi_streamExistsForAC[i]=0;
++    }
++
++        /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */
++    WMI_INIT_WMISTREAM_AC_MAP(wmip);
++
++    UNLOCK_WMI(wmip);
++
++    A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1);
++}
++
++void
++wmi_shutdown(struct wmi_t *wmip)
++{
++    if (wmip != NULL) {
++        wlan_node_table_cleanup(&wmip->wmi_scan_table);
++        if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) {
++            A_MUTEX_DELETE(&wmip->wmi_lock);
++        }
++        A_FREE(wmip);
++    }
++}
++
++/*
++ *  performs DIX to 802.3 encapsulation for transmit packets.
++ *  uses passed in buffer.  Returns buffer or NULL if failed.
++ *  Assumes the entire DIX header is contigous and that there is
++ *  enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
++ */
++A_STATUS
++wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf)
++{
++    A_UINT8          *datap;
++    A_UINT16         typeorlen;
++    ATH_MAC_HDR      macHdr;
++    ATH_LLC_SNAP_HDR *llcHdr;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_HEADROOM(osbuf) <
++        (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR)))
++    {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN);
++
++    if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) {
++        /*
++         * packet is already in 802.3 format - return success
++         */
++        A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG));
++        return (A_OK);
++    }
++
++    /*
++     * Save mac fields and length to be inserted later
++     */
++    A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN);
++    A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN);
++    macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) +
++                                  sizeof(ATH_LLC_SNAP_HDR));
++
++    /*
++     * Make room for LLC+SNAP headers
++     */
++    if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
++
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
++    llcHdr->dsap      = 0xAA;
++    llcHdr->ssap      = 0xAA;
++    llcHdr->cntl      = 0x03;
++    llcHdr->orgCode[0] = 0x0;
++    llcHdr->orgCode[1] = 0x0;
++    llcHdr->orgCode[2] = 0x0;
++    llcHdr->etherType = typeorlen;
++
++    return (A_OK);
++}
++
++/*
++ * Adds a WMI data header
++ * Assumes there is enough room in the buffer to add header.
++ */
++A_STATUS
++wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType)
++{
++    WMI_DATA_HDR     *dtHdr;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
++    dtHdr->info = msgType;
++    dtHdr->rssi = 0;
++
++    return (A_OK);
++}
++
++A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up)
++{
++    A_UINT8         *datap;
++    A_UINT8         trafficClass = WMM_AC_BE, userPriority = up;
++    ATH_LLC_SNAP_HDR *llcHdr;
++    A_UINT16        ipType = IP_ETHERTYPE;
++    WMI_DATA_HDR     *dtHdr;
++    WMI_CREATE_PSTREAM_CMD  cmd;
++    A_BOOL           streamExists = FALSE;
++
++    A_ASSERT(osbuf != NULL);
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    if (up == UNDEFINED_PRI) {
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) +
++                                  sizeof(ATH_MAC_HDR));
++
++        if (llcHdr->etherType == A_CPU2BE16(ipType)) {
++        /* Extract the endpoint info from the TOS field in the IP header */
++        userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR));
++        }
++    }
++
++    if (userPriority < MAX_NUM_PRI) {
++        trafficClass = convert_userPriority_to_trafficClass(userPriority);
++    }
++
++    dtHdr = (WMI_DATA_HDR *)datap;
++    if(dir==UPLINK_TRAFFIC)
++        dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT;  /* lower 3-bits are 802.1d priority */
++
++    LOCK_WMI(wmip);
++    streamExists = wmip->wmi_fatPipeExists;
++    UNLOCK_WMI(wmip);
++
++    if (!(streamExists & (1 << trafficClass))) {
++
++        A_MEMZERO(&cmd, sizeof(cmd));
++	    cmd.trafficClass = trafficClass;
++	    cmd.userPriority = userPriority;
++		cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT;
++            /* Implicit streams are created with TSID 0xFF */
++        cmd.tsid = WMI_IMPLICIT_PSTREAM;
++        wmi_create_pstream_cmd(wmip, &cmd);
++    }
++
++    return trafficClass;
++}
++
++WMI_PRI_STREAM_ID
++wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass)
++{
++    return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass);
++}
++
++/*
++ *  performs 802.3 to DIX encapsulation for received packets.
++ *  Assumes the entire 802.3 header is contigous.
++ */
++A_STATUS
++wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf)
++{
++    A_UINT8          *datap;
++    ATH_MAC_HDR      macHdr;
++    ATH_LLC_SNAP_HDR *llcHdr;
++
++    A_ASSERT(osbuf != NULL);
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR));
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
++    macHdr.typeOrLen = llcHdr->etherType;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
++
++    return (A_OK);
++}
++
++/*
++ * Removes a WMI data header
++ */
++A_STATUS
++wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf)
++{
++    A_ASSERT(osbuf != NULL);
++
++    return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR)));
++}
++
++void
++wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg)
++{
++    wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg);
++}
++
++/*
++ * WMI Extended Event received from Target.
++ */
++A_STATUS
++wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf)
++{
++    WMIX_CMD_HDR *cmd;
++    A_UINT16 id;
++    A_UINT8 *datap;
++    A_UINT32 len;
++    A_STATUS status = A_OK;
++
++    if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    id = cmd->commandId;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++    len = A_NETBUF_LEN(osbuf);
++
++    switch (id) {
++    case (WMIX_DSETOPENREQ_EVENTID):
++        status = wmi_dset_open_req_rx(wmip, datap, len);
++        break;
++#ifdef CONFIG_HOST_DSET_SUPPORT
++    case (WMIX_DSETCLOSE_EVENTID):
++        status = wmi_dset_close_rx(wmip, datap, len);
++        break;
++    case (WMIX_DSETDATAREQ_EVENTID):
++        status = wmi_dset_data_req_rx(wmip, datap, len);
++        break;
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++    case (WMIX_GPIO_INTR_EVENTID):
++        wmi_gpio_intr_rx(wmip, datap, len);
++        break;
++    case (WMIX_GPIO_DATA_EVENTID):
++        wmi_gpio_data_rx(wmip, datap, len);
++        break;
++    case (WMIX_GPIO_ACK_EVENTID):
++        wmi_gpio_ack_rx(wmip, datap, len);
++        break;
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++    case (WMIX_HB_CHALLENGE_RESP_EVENTID):
++        wmi_hbChallengeResp_rx(wmip, datap, len);
++        break;
++    case (WMIX_DBGLOG_EVENTID):
++        wmi_dbglog_event_rx(wmip, datap, len);
++        break;
++    default:
++        A_DPRINTF(DBG_WMI|DBG_ERROR,
++            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
++        wmip->wmi_stats.cmd_id_err++;
++        status = A_ERROR;
++        break;
++    }
++
++    return status;
++}
++
++/*
++ * Control Path
++ */
++A_UINT32 cmdRecvNum;
++
++A_STATUS
++wmi_control_rx(struct wmi_t *wmip, void *osbuf)
++{
++    WMI_CMD_HDR *cmd;
++    A_UINT16 id;
++    A_UINT8 *datap;
++    A_UINT32 len, i, loggingReq;
++    A_STATUS status = A_OK;
++
++    A_ASSERT(osbuf != NULL);
++    if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    id = cmd->commandId;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++    len = A_NETBUF_LEN(osbuf);
++
++    ar6000_get_driver_cfg(wmip->wmi_devt,
++                    AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS,
++                    &loggingReq);
++
++    if(loggingReq) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id));
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum));
++        for(i = 0; i < len; i++)
++            AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i]));
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n"));
++    }
++
++    LOCK_WMI(wmip);
++    cmdRecvNum++;
++    UNLOCK_WMI(wmip);
++
++    switch (id) {
++    case (WMI_GET_BITRATE_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG));
++        status = wmi_bitrate_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_CHANNEL_LIST_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG));
++        status = wmi_channelList_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_TX_PWR_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG));
++        status = wmi_txPwr_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_READY_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG));
++        status = wmi_ready_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt);
++        break;
++    case (WMI_CONNECT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG));
++        status = wmi_connect_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_DISCONNECT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG));
++        status = wmi_disconnect_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_TKIP_MICERR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG));
++        status = wmi_tkip_micerr_event_rx(wmip, datap, len);
++        break;
++    case (WMI_BSSINFO_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG));
++        status = wmi_bssInfo_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_REGDOMAIN_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG));
++        status = wmi_regDomain_event_rx(wmip, datap, len);
++        break;
++    case (WMI_PSTREAM_TIMEOUT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG));
++        status = wmi_pstream_timeout_event_rx(wmip, datap, len);
++            /* pstreams are fatpipe abstractions that get implicitly created.
++             * User apps only deal with thinstreams. creation of a thinstream
++             * by the user or data traffic flow in an AC triggers implicit
++             * pstream creation. Do we need to send this event to App..?
++             * no harm in sending it.
++             */
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_NEIGHBOR_REPORT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG));
++        status = wmi_neighborReport_event_rx(wmip, datap, len);
++        break;
++    case (WMI_SCAN_COMPLETE_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG));
++        status = wmi_scanComplete_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_CMDERROR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG));
++        status = wmi_errorEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_STATISTICS_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG));
++        status = wmi_statsEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_RSSI_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_rssiThresholdEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_ERROR_REPORT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG));
++        status = wmi_reportErrorEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_OPT_RX_FRAME_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG));
++        status = wmi_opt_frame_event_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_ROAM_TBL_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG));
++        status = wmi_roam_tbl_event_rx(wmip, datap, len);
++        break;
++    case (WMI_EXTENSION_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG));
++        status = wmi_control_rx_xtnd(wmip, osbuf);
++        break;
++    case (WMI_CAC_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG));
++        status = wmi_cac_event_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_ROAM_DATA_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG));
++        status = wmi_roam_data_event_rx(wmip, datap, len);
++        break;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    case (WMI_TEST_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG));
++        status = wmi_tcmd_test_report_rx(wmip, datap, len);
++        break;
++#endif
++    case (WMI_GET_FIXRATES_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG));
++        status = wmi_ratemask_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_TX_RETRY_ERR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG));
++        status = wmi_txRetryErrEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_SNR_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_snrThresholdEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_LQ_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_lqThresholdEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_APLIST_EVENTID):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n"));
++        status = wmi_aplistEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_KEEPALIVE_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG));
++        status = wmi_keepalive_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_WOW_LIST_EVENTID):
++        status = wmi_get_wow_list_event_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_PMKID_LIST_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG));
++        status = wmi_get_pmkid_list_event_rx(wmip, datap, len);
++        break;
++    default:
++        A_DPRINTF(DBG_WMI|DBG_ERROR,
++            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
++        wmip->wmi_stats.cmd_id_err++;
++        status = A_ERROR;
++        break;
++    }
++
++    A_NETBUF_FREE(osbuf);
++
++    return status;
++}
++
++static A_STATUS
++wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap;
++
++    if (len < sizeof(WMI_READY_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++    wmip->wmi_ready = TRUE;
++    A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CONNECT_EVENT *ev;
++
++    if (len < sizeof(WMI_CONNECT_EVENT)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_CONNECT_EVENT *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
++        DBGARG, ev->channel,
++        ev->bssid[0], ev->bssid[1], ev->bssid[2],
++        ev->bssid[3], ev->bssid[4], ev->bssid[5]));
++
++    A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN);
++
++    A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid,
++                         ev->listenInterval, ev->beaconInterval,
++                         ev->networkType, ev->beaconIeLen,
++                         ev->assocReqLen, ev->assocRespLen,
++                         ev->assocInfo);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_REG_DOMAIN_EVENT *ev;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_REG_DOMAIN_EVENT *)datap;
++
++    A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_NEIGHBOR_REPORT_EVENT *ev;
++    int numAps;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap;
++    numAps = ev->numberOfAps;
++
++    if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) {
++        return A_EINVAL;
++    }
++
++    A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_DISCONNECT_EVENT *ev;
++
++    if (len < sizeof(WMI_DISCONNECT_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    ev = (WMI_DISCONNECT_EVENT *)datap;
++
++    A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid));
++
++    A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid,
++                            ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TKIP_MICERR_EVENT *ev;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    ev = (WMI_TKIP_MICERR_EVENT *)datap;
++    A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    bss_t *bss;
++    WMI_BSS_INFO_HDR *bih;
++    A_UINT8 *buf;
++    A_UINT32 nodeCachingAllowed;
++
++    if (len <= sizeof(WMI_BSS_INFO_HDR)) {
++        return A_EINVAL;
++    }
++
++    A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len);
++    /* What is driver config for wlan node caching? */
++    if(ar6000_get_driver_cfg(wmip->wmi_devt,
++                    AR6000_DRIVER_CFG_GET_WLANNODECACHING,
++                    &nodeCachingAllowed) != A_OK) {
++        return A_EINVAL;
++    }
++
++    if(!nodeCachingAllowed) {
++        return A_OK;
++    }
++
++
++    bih = (WMI_BSS_INFO_HDR *)datap;
++    buf = datap + sizeof(WMI_BSS_INFO_HDR);
++    len -= sizeof(WMI_BSS_INFO_HDR);
++
++    A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, "
++              "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG,
++              bih->channel, (unsigned char) bih->rssi, bih->bssid[0],
++              bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4],
++              bih->bssid[5]));
++
++    if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) {
++	    printk("%s() A_OK 2\n", __FUNCTION__);
++		return A_OK;
++    }
++
++    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
++    if (bss != NULL) {
++        /*
++         * Free up the node.  Not the most efficient process given
++         * we are about to allocate a new node but it is simple and should be
++         * adequate.
++         */
++        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
++    }
++
++    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
++    if (bss == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    bss->ni_snr        = bih->snr;
++    bss->ni_rssi       = bih->rssi;
++    A_ASSERT(bss->ni_buf != NULL);
++    A_MEMCPY(bss->ni_buf, buf, len);
++
++    if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) {
++        wlan_node_free(bss);
++        return A_EINVAL;
++    }
++
++    /*
++     * Update the frequency in ie_chan, overwriting of channel number
++     * which is done in wlan_parse_beacon
++     */
++    bss->ni_cie.ie_chan = bih->channel;
++    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    bss_t *bss;
++    WMI_OPT_RX_INFO_HDR *bih;
++    A_UINT8 *buf;
++
++    if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) {
++        return A_EINVAL;
++    }
++
++    bih = (WMI_OPT_RX_INFO_HDR *)datap;
++    buf = datap + sizeof(WMI_OPT_RX_INFO_HDR);
++    len -= sizeof(WMI_OPT_RX_INFO_HDR);
++
++    A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG,
++        bih->bssid[4], bih->bssid[5]));
++
++    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
++    if (bss != NULL) {
++        /*
++         * Free up the node.  Not the most efficient process given
++         * we are about to allocate a new node but it is simple and should be
++         * adequate.
++         */
++        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
++    }
++
++    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
++    if (bss == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    bss->ni_snr        = bih->snr;
++    bss->ni_cie.ie_chan = bih->channel;
++    A_ASSERT(bss->ni_buf != NULL);
++    A_MEMCPY(bss->ni_buf, buf, len);
++    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
++
++    return A_OK;
++}
++
++    /* This event indicates inactivity timeout of a fatpipe(pstream)
++     * at the target
++     */
++static A_STATUS
++wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_PSTREAM_TIMEOUT_EVENT *ev;
++
++    if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) {
++        return A_EINVAL;
++    }
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG));
++
++    ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap;
++
++        /* When the pstream (fat pipe == AC) timesout, it means there were no
++         * thinStreams within this pstream & it got implicitly created due to
++         * data flow on this AC. We start the inactivity timer only for
++         * implicitly created pstream. Just reset the host state.
++         */
++        /* Set the activeTsids for this AC to 0 */
++    LOCK_WMI(wmip);
++    wmip->wmi_streamExistsForAC[ev->trafficClass]=0;
++    wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass);
++    UNLOCK_WMI(wmip);
++
++        /*Indicate inactivity to driver layer for this fatpipe (pstream)*/
++    A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_BIT_RATE_CMD *reply;
++    A_INT32 rate;
++
++    if (len < sizeof(WMI_BIT_RATE_CMD)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_BIT_RATE_CMD *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex));
++
++    if (reply->rateIndex == RATE_AUTO) {
++        rate = RATE_AUTO;
++    } else {
++        rate = wmi_rateTable[(A_UINT32) reply->rateIndex];
++    }
++
++    A_WMI_BITRATE_RX(wmip->wmi_devt, rate);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_FIX_RATES_CMD *reply;
++
++    if (len < sizeof(WMI_BIT_RATE_CMD)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_FIX_RATES_CMD *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask));
++
++    A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CHANNEL_LIST_REPLY *reply;
++
++    if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_CHANNEL_LIST_REPLY *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels,
++                          reply->channelList);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TX_PWR_REPLY *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TX_PWR_REPLY *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM);
++
++    return A_OK;
++}
++static A_STATUS
++wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_GET_KEEPALIVE_CMD *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_GET_KEEPALIVE_CMD *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured);
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETOPENREQ_EVENT *dsetopenreq;
++
++    if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) {
++        return A_EINVAL;
++    }
++    dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id));
++    A_WMI_DSET_OPEN_REQ(wmip->wmi_devt,
++                        dsetopenreq->dset_id,
++                        dsetopenreq->targ_dset_handle,
++                        dsetopenreq->targ_reply_fn,
++                        dsetopenreq->targ_reply_arg);
++
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++static A_STATUS
++wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETCLOSE_EVENT *dsetclose;
++
++    if (len < sizeof(WMIX_DSETCLOSE_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    dsetclose = (WMIX_DSETCLOSE_EVENT *)datap;
++    A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETDATAREQ_EVENT *dsetdatareq;
++
++    if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap;
++    A_WMI_DSET_DATA_REQ(wmip->wmi_devt,
++                         dsetdatareq->access_cookie,
++                         dsetdatareq->offset,
++                         dsetdatareq->length,
++                         dsetdatareq->targ_buf,
++                         dsetdatareq->targ_reply_fn,
++                         dsetdatareq->targ_reply_arg);
++
++    return A_OK;
++}
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++static A_STATUS
++wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_SCAN_COMPLETE_EVENT *ev;
++
++    ev = (WMI_SCAN_COMPLETE_EVENT *)datap;
++    A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status);
++
++    return A_OK;
++}
++
++/*
++ * Target is reporting a programming error.  This is for
++ * developer aid only.  Target only checks a few common violations
++ * and it is responsibility of host to do all error checking.
++ * Behavior of target after wmi error event is undefined.
++ * A reset is recommended.
++ */
++static A_STATUS
++wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CMD_ERROR_EVENT *ev;
++
++    ev = (WMI_CMD_ERROR_EVENT *)datap;
++    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId));
++    switch (ev->errorCode) {
++    case (INVALID_PARAM):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n"));
++        break;
++    case (ILLEGAL_STATE):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n"));
++        break;
++    case (INTERNAL_ERROR):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n"));
++        break;
++    }
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_STATS *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_STATS *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_RSSI_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_RSSI_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi);
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ERROR_REPORT_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CAC_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_CAC_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac,
++                reply->cac_indication, reply->statusCode,
++                reply->tspecSuggestion);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_HB_CHALLENGE_RESP_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG));
++
++    A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ROAM_TBL *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ROAM_TBL *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ROAM_DATA *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ROAM_DATA *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TX_RETRY_ERR_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TX_RETRY_ERR_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_SNR_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_SNR_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_LQ_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_LQ_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_UINT16 ap_info_entry_size;
++    WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap;
++    WMI_AP_INFO_V1 *ap_info_v1;
++    A_UINT8 i;
++
++    if (len < sizeof(WMI_APLIST_EVENT)) {
++        return A_EINVAL;
++    }
++
++    if (ev->apListVer == APLIST_VER1) {
++        ap_info_entry_size = sizeof(WMI_AP_INFO_V1);
++        ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList;
++    } else {
++        return A_EINVAL;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP));
++    if (len < (int)(sizeof(WMI_APLIST_EVENT) +
++              (ev->numAP - 1) * ap_info_entry_size))
++    {
++        return A_EINVAL;
++    }
++
++    /*
++     * AP List Ver1 Contents
++     */
++    for (i = 0; i < ev->numAP; i++) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\
++                    "Channel %d\n", i,
++                   ap_info_v1->bssid[0], ap_info_v1->bssid[1],
++                   ap_info_v1->bssid[2], ap_info_v1->bssid[3],
++                   ap_info_v1->bssid[4], ap_info_v1->bssid[5],
++                   ap_info_v1->channel));
++        ap_info_v1++;
++    }
++    return A_OK;
++}
++
++static A_STATUS
++wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_UINT32 dropped;
++
++    dropped = *((A_UINT32 *)datap);
++    datap += sizeof(dropped);
++    len -= sizeof(dropped);
++    A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len);
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++static A_STATUS
++wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG,
++        gpio_intr->intr_mask, gpio_intr->input_values));
++
++    A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG,
++        gpio_data->reg_id, gpio_data->value));
++
++    A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_GPIO_ACK_RX();
++
++    return A_OK;
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++/*
++ * Called to send a wmi command. Command specific data is already built
++ * on osbuf and current osbuf->data points to it.
++ */
++A_STATUS
++wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++               WMI_SYNC_FLAG syncflag)
++{
++#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID))
++    WMI_CMD_HDR         *cHdr;
++    WMI_PRI_STREAM_ID   streamID = WMI_CONTROL_PRI;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (syncflag >= END_WMIFLAG) {
++        return A_EINVAL;
++    }
++
++    if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
++        /*
++         * We want to make sure all data currently queued is transmitted before
++         * the cmd execution.  Establish a new sync point.
++         */
++        wmi_sync_point(wmip);
++    }
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    cHdr->commandId = cmdId;
++
++    /*
++     * Send cmd, some via control pipe, others via data pipe
++     */
++    if (IS_LONG_CMD(cmdId)) {
++        wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE);
++        // TODO ... these can now go through the control endpoint via HTC 2.0
++        streamID = WMI_BEST_EFFORT_PRI;
++    }
++    A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID);
++
++    if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
++        /*
++         * We want to make sure all new data queued waits for the command to
++         * execute. Establish a new sync point.
++         */
++        wmi_sync_point(wmip);
++    }
++    return (A_OK);
++#undef IS_LONG_CMD
++}
++
++A_STATUS
++wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++                  WMI_SYNC_FLAG syncflag)
++{
++    WMIX_CMD_HDR     *cHdr;
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    cHdr->commandId = cmdId;
++
++    return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag);
++}
++
++A_STATUS
++wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType,
++                DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode,
++                CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen,
++                CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen,
++                int ssidLength, A_UCHAR *ssid,
++                A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags)
++{
++    void *osbuf;
++    WMI_CONNECT_CMD *cc;
++
++    if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) {
++        return A_EINVAL;
++    }
++    if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD));
++
++    cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cc, sizeof(*cc));
++
++    A_MEMCPY(cc->ssid, ssid, ssidLength);
++    cc->ssidLength          = ssidLength;
++    cc->networkType         = netType;
++    cc->dot11AuthMode       = dot11AuthMode;
++    cc->authMode            = authMode;
++    cc->pairwiseCryptoType  = pairwiseCrypto;
++    cc->pairwiseCryptoLen   = pairwiseCryptoLen;
++    cc->groupCryptoType     = groupCrypto;
++    cc->groupCryptoLen      = groupCryptoLen;
++    cc->channel             = channel;
++    cc->ctrl_flags          = ctrl_flags;
++
++    if (bssid != NULL) {
++        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
++    }
++    if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) {
++        return(A_ERROR);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel)
++{
++    void *osbuf;
++    WMI_RECONNECT_CMD *cc;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD));
++
++    cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cc, sizeof(*cc));
++
++    cc->channel = channel;
++
++    if (bssid != NULL) {
++        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_disconnect_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++    A_STATUS status;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    /* Bug fix for 24817(elevator bug) - the disconnect command does not
++       need to do a SYNC before.*/
++    status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID,
++                         NO_SYNC_WMIFLAG));
++
++    return status;
++}
++
++A_STATUS
++wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
++                  A_BOOL forceFgScan, A_BOOL isLegacy,
++                  A_UINT32 homeDwellTime, A_UINT32 forceScanInterval)
++{
++    void *osbuf;
++    WMI_START_SCAN_CMD *sc;
++
++    if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*sc));
++
++    sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf));
++    sc->scanType = scanType;
++    sc->forceFgScan = forceFgScan;
++    sc->isLegacy = isLegacy;
++    sc->homeDwellTime = homeDwellTime;
++    sc->forceScanInterval = forceScanInterval;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
++                   A_UINT16 fg_end_sec, A_UINT16 bg_sec,
++                   A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec,
++                   A_UINT16 pas_chdw_msec,
++                   A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
++                   A_UINT32 max_dfsch_act_time)
++{
++    void *osbuf;
++    WMI_SCAN_PARAMS_CMD *sc;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*sc));
++
++    sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(sc, sizeof(*sc));
++    sc->fg_start_period  = fg_start_sec;
++    sc->fg_end_period    = fg_end_sec;
++    sc->bg_period        = bg_sec;
++    sc->minact_chdwell_time = minact_chdw_msec;
++    sc->maxact_chdwell_time = maxact_chdw_msec;
++    sc->pas_chdwell_time = pas_chdw_msec;
++    sc->shortScanRatio   = shScanRatio;
++    sc->scanCtrlFlags    = scanCtrlFlags;
++    sc->max_dfsch_act_time = max_dfsch_act_time;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask)
++{
++    void *osbuf;
++    WMI_BSS_FILTER_CMD *cmd;
++
++    if (filter >= LAST_BSS_FILTER) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->bssFilter = filter;
++    cmd->ieMask = ieMask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
++                   A_UINT8 ssidLength, A_UCHAR *ssid)
++{
++    void *osbuf;
++    WMI_PROBED_SSID_CMD *cmd;
++
++    if (index > MAX_PROBED_SSID_INDEX) {
++        return A_EINVAL;
++    }
++    if (ssidLength > sizeof(cmd->ssid)) {
++        return A_EINVAL;
++    }
++    if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) {
++        return A_EINVAL;
++    }
++    if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->entryIndex = index;
++    cmd->flag       = flag;
++    cmd->ssidLength = ssidLength;
++    A_MEMCPY(cmd->ssid, ssid, ssidLength);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons)
++{
++    void *osbuf;
++    WMI_LISTEN_INT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->listenInterval = listenInterval;
++    cmd->numBeacons = listenBeacons;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons)
++{
++    void *osbuf;
++    WMI_BMISS_TIME_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->bmissTime = bmissTime;
++    cmd->numBeacons =  bmissBeacons;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
++                     A_UINT8 ieLen, A_UINT8 *ieInfo)
++{
++    void *osbuf;
++    WMI_SET_ASSOC_INFO_CMD *cmd;
++    A_UINT16 cmdLen;
++
++    cmdLen = sizeof(*cmd) + ieLen - 1;
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++
++    cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, cmdLen);
++    cmd->ieType = ieType;
++    cmd->bufferSize = ieLen;
++    A_MEMCPY(cmd->assocInfo, ieInfo, ieLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode)
++{
++    void *osbuf;
++    WMI_POWER_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->powerMode = powerMode;
++    wmip->wmi_powerMode = powerMode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
++                   A_UINT16 atim_windows, A_UINT16 timeout_value)
++{
++    void *osbuf;
++    WMI_IBSS_PM_CAPS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->power_saving = pmEnable;
++    cmd->ttl = ttl;
++    cmd->atim_windows = atim_windows;
++    cmd->timeout_value = timeout_value;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
++                 A_UINT16 psPollNum, A_UINT16 dtimPolicy)
++{
++    void *osbuf;
++    WMI_POWER_PARAMS_CMD *pm;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*pm));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*pm));
++
++    pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(pm, sizeof(*pm));
++    pm->idle_period   = idlePeriod;
++    pm->pspoll_number = psPollNum;
++    pm->dtim_policy   = dtimPolicy;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout)
++{
++    void *osbuf;
++    WMI_DISC_TIMEOUT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->disconnectTimeout = timeout;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType,
++               A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC,
++               A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
++               WMI_SYNC_FLAG sync_flag)
++{
++    void *osbuf;
++    WMI_ADD_CIPHER_KEY_CMD *cmd;
++
++    if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) ||
++        (keyMaterial == NULL))
++    {
++        return A_EINVAL;
++    }
++
++    if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keyIndex = keyIndex;
++    cmd->keyType  = keyType;
++    cmd->keyUsage = keyUsage;
++    cmd->keyLength = keyLength;
++    A_MEMCPY(cmd->key, keyMaterial, keyLength);
++    if (NULL != keyRSC) {
++        A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC));
++    }
++    cmd->key_op_ctrl = key_op_ctrl;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag));
++}
++
++A_STATUS
++wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk)
++{
++    void *osbuf;
++    WMI_ADD_KRK_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_delete_krk_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex)
++{
++    void *osbuf;
++    WMI_DELETE_CIPHER_KEY_CMD *cmd;
++
++    if (keyIndex > WMI_MAX_KEY_INDEX) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keyIndex = keyIndex;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
++                 A_BOOL set)
++{
++    void *osbuf;
++    WMI_SET_PMKID_CMD *cmd;
++
++    if (bssid == NULL) {
++        return A_EINVAL;
++    }
++
++    if ((set == TRUE) && (pmkId == NULL)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++    if (set == TRUE) {
++        A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid));
++        cmd->enable = PMKID_ENABLE;
++    } else {
++        A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid));
++        cmd->enable = PMKID_DISABLE;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en)
++{
++    void *osbuf;
++    WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_akmp_params_cmd(struct wmi_t *wmip,
++                        WMI_SET_AKMP_PARAMS_CMD *akmpParams)
++{
++    void *osbuf;
++    WMI_SET_AKMP_PARAMS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++    cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->akmpInfo = akmpParams->akmpInfo;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
++                       WMI_SET_PMKID_LIST_CMD *pmkInfo)
++{
++    void *osbuf;
++    WMI_SET_PMKID_LIST_CMD *cmd;
++    A_UINT16 cmdLen;
++    A_UINT8 i;
++
++    cmdLen = sizeof(pmkInfo->numPMKID) +
++             pmkInfo->numPMKID * sizeof(WMI_PMKID);
++
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++    cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->numPMKID = pmkInfo->numPMKID;
++
++    for (i = 0; i < cmd->numPMKID; i++) {
++        A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i],
++                 WMI_PMKID_LEN);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_pmkid_list_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID)
++{
++    WMI_DATA_HDR     *dtHdr;
++
++    A_ASSERT(streamID != WMI_CONTROL_PRI);
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
++    dtHdr->info =
++      (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID));
++
++    return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID));
++}
++
++typedef struct _WMI_DATA_SYNC_BUFS {
++    A_UINT8            trafficClass;
++    void               *osbuf;
++}WMI_DATA_SYNC_BUFS;
++
++static A_STATUS
++wmi_sync_point(struct wmi_t *wmip)
++{
++	void *cmd_osbuf;
++    WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC];
++	A_UINT8 i,numPriStreams=0;
++	A_STATUS status;
++
++	A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    memset(dataSyncBufs,0,sizeof(dataSyncBufs));
++
++    /* lock out while we walk through the priority list and assemble our local array */
++    LOCK_WMI(wmip);
++
++    for (i=0; i < WMM_NUM_AC ; i++) {
++		if (wmip->wmi_fatPipeExists & (1 << i)) {
++            numPriStreams++;
++            dataSyncBufs[numPriStreams-1].trafficClass = i;
++        }
++    }
++
++    UNLOCK_WMI(wmip);
++
++    /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */
++
++    do {
++	    /*
++	     * We allocate all network buffers needed so we will be able to
++	     * send all required frames.
++	     */
++	    cmd_osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++	    if (cmd_osbuf == NULL) {
++		    status = A_NO_MEMORY;
++            break;
++	    }
++
++	    for (i=0; i < numPriStreams ; i++) {
++	        dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0);
++            if (dataSyncBufs[i].osbuf == NULL) {
++                status = A_NO_MEMORY;
++                break;
++            }
++	    } //end for
++
++	    /*
++	     * Send sync cmd followed by sync data messages on all endpoints being
++	     * used
++	     */
++	    status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID,
++						  NO_SYNC_WMIFLAG);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++            /* cmd buffer sent, we no longer own it */
++        cmd_osbuf = NULL;
++
++		for(i=0; i < numPriStreams; i++) {
++            A_ASSERT(dataSyncBufs[i].osbuf != NULL);
++
++            status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf,
++                        WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass));
++
++            if (A_FAILED(status)) {
++                break;
++            }
++            /* we don't own this buffer anymore, NULL it out of the array so it
++             * won't get cleaned up */
++            dataSyncBufs[i].osbuf = NULL;
++		} //end for
++
++    } while(FALSE);
++
++    /* free up any resources left over (possibly due to an error) */
++
++    if (cmd_osbuf != NULL) {
++        A_NETBUF_FREE(cmd_osbuf);
++    }
++
++    for (i = 0; i < numPriStreams; i++) {
++        if (dataSyncBufs[i].osbuf != NULL) {
++            A_NETBUF_FREE(dataSyncBufs[i].osbuf);
++        }
++    }
++
++	return (status);
++}
++
++A_STATUS
++wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params)
++{
++    void *osbuf;
++    WMI_CREATE_PSTREAM_CMD *cmd;
++	A_UINT16 activeTsids=0;
++    A_UINT8 fatPipeExistsForAC=0;
++
++    /* Validate all the parameters. */
++    if( !((params->userPriority < 8) &&
++         (params->userPriority <= 0x7) &&
++         (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass)  &&
++         (params->trafficDirection == UPLINK_TRAFFIC ||
++            params->trafficDirection == DNLINK_TRAFFIC ||
++            params->trafficDirection == BIDIR_TRAFFIC) &&
++         (params->trafficType == TRAFFIC_TYPE_APERIODIC ||
++            params->trafficType == TRAFFIC_TYPE_PERIODIC ) &&
++         (params->voicePSCapability == DISABLE_FOR_THIS_AC  ||
++            params->voicePSCapability == ENABLE_FOR_THIS_AC ||
++            params->voicePSCapability == ENABLE_FOR_ALL_AC) &&
++         (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) )
++    {
++        return  A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Sending create_pstream_cmd: ac=%d    tsid:%d\n", DBGARG,
++        params->trafficClass, params->tsid));
++
++    cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    A_MEMCPY(cmd, params, sizeof(*cmd));
++
++        /* this is an implicitly created Fat pipe */
++    if (params->tsid == WMI_IMPLICIT_PSTREAM) {
++        LOCK_WMI(wmip);
++        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
++        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
++        UNLOCK_WMI(wmip);
++    } else {
++            /* this is an explicitly created thin stream within a fat pipe */
++        LOCK_WMI(wmip);
++        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
++        activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass];
++        wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid);
++            /* if a thinstream becomes active, the fat pipe automatically
++            * becomes active
++            */
++        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
++        UNLOCK_WMI(wmip);
++    }
++
++        /* Indicate activty change to driver layer only if this is the
++         * first TSID to get created in this AC explicitly or an implicit
++         * fat pipe is getting created.
++         */
++    if (!fatPipeExistsForAC) {
++        A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass);
++    }
++
++    /* mike: should be SYNC_BEFORE_WMIFLAG */
++    return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid)
++{
++    void *osbuf;
++    WMI_DELETE_PSTREAM_CMD *cmd;
++    A_STATUS status;
++	A_UINT16 activeTsids=0;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->trafficClass = trafficClass;
++    cmd->tsid = tsid;
++
++    LOCK_WMI(wmip);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++        /* Check if the tsid was created & exists */
++    if (!(activeTsids & (1<<tsid))) {
++
++        A_DPRINTF(DBG_WMI,
++        (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass));
++            /* TODO: return a more appropriate err code */
++        return A_ERROR;
++    }
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid));
++
++    status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID,
++                         SYNC_BEFORE_WMIFLAG));
++
++    LOCK_WMI(wmip);
++    wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++
++        /* Indicate stream inactivity to driver layer only if all tsids
++         * within this AC are deleted.
++         */
++    if(!activeTsids) {
++        A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass);
++        wmip->wmi_fatPipeExists &= ~(1<<trafficClass);
++    }
++
++    return status;
++}
++
++/*
++ * used to set the bit rate.  rate is in Kbps.  If rate == -1
++ * then auto selection is used.
++ */
++A_STATUS
++wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate)
++{
++    void *osbuf;
++    WMI_BIT_RATE_CMD *cmd;
++    A_INT8 index;
++
++    if (rate != -1) {
++        index = wmi_validate_bitrate(wmip, rate);
++        if(index == A_EINVAL){
++            return A_EINVAL;
++        }
++    } else {
++        index = -1;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->rateIndex = index;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_bitrate_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++/*
++ * Returns TRUE iff the given rate index is legal in the current PHY mode.
++ */
++A_BOOL
++wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex)
++{
++    WMI_PHY_MODE phyMode = wmip->wmi_phyMode;
++    A_BOOL isValid = TRUE;
++    switch(phyMode) {
++        case WMI_11A_MODE:
++            if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11B_MODE:
++            if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11GONLY_MODE:
++            if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11G_MODE:
++        case WMI_11AG_MODE:
++            if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        default:
++            A_ASSERT(FALSE);
++            break;
++    }
++
++    return isValid;
++}
++
++A_INT8
++wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate)
++{
++    A_INT8 i;
++    if (rate != -1)
++    {
++        for (i=0;;i++)
++        {
++            if (wmi_rateTable[(A_UINT32) i] == 0) {
++                return A_EINVAL;
++            }
++            if (wmi_rateTable[(A_UINT32) i] == rate) {
++                break;
++            }
++        }
++    }
++    else{
++     i = -1;
++    }
++
++    if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) {
++        return A_EINVAL;
++    }
++
++    return i;
++}
++
++A_STATUS
++wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask)
++{
++    void *osbuf;
++    WMI_FIX_RATES_CMD *cmd;
++    A_UINT32 rateIndex;
++
++    /* Make sure all rates in the mask are valid in the current PHY mode */
++    for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) {
++       if((1 << rateIndex) & (A_UINT32)fixRatesMask) {
++            if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) {
++                A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG));
++                return A_EINVAL;
++            }
++       }
++    }
++
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->fixRateMask = fixRatesMask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_ratemask_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_channelList_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++/*
++ * used to generate a wmi sey channel Parameters cmd.
++ * mode should always be specified and corresponds to the phy mode of the
++ * wlan.
++ * numChan should alway sbe specified. If zero indicates that all available
++ * channels should be used.
++ * channelList is an array of channel frequencies (in Mhz) which the radio
++ * should limit its operation to.  It should be NULL if numChan == 0.  Size of
++ * array should correspond to numChan entries.
++ */
++A_STATUS
++wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
++                          WMI_PHY_MODE mode, A_INT8 numChan,
++                          A_UINT16 *channelList)
++{
++    void *osbuf;
++    WMI_CHANNEL_PARAMS_CMD *cmd;
++    A_INT8 size;
++
++    size = sizeof (*cmd);
++
++    if (numChan) {
++        if (numChan > WMI_MAX_CHANNELS) {
++            return A_EINVAL;
++        }
++        size += sizeof(A_UINT16) * (numChan - 1);
++    }
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    wmip->wmi_phyMode = mode;
++    cmd->scanParam   = scanParam;
++    cmd->phyMode     = mode;
++    cmd->numChannels = numChan;
++    A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_rssi_threshold_params(struct wmi_t *wmip,
++                              WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val ||
++        rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val ||
++        rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val ||
++        rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val ||
++        rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val ||
++        rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val ||
++        rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val ||
++        rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val ||
++        rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val ||
++        rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip,
++                              WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SET_HOST_SLEEP_MODE_CMD *cmd;
++
++    if( hostModeCmd->awake == hostModeCmd->asleep) {
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_wow_mode_cmd(struct wmi_t *wmip,
++                              WMI_SET_WOW_MODE_CMD *wowModeCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SET_WOW_MODE_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_get_wow_list_cmd(struct wmi_t *wmip,
++                              WMI_GET_WOW_LIST_CMD *wowListCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_GET_WOW_LIST_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++static A_STATUS
++wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_GET_WOW_LIST_REPLY *reply;
++
++    if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_GET_WOW_LIST_REPLY *)datap;
++
++    A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters,
++                          reply);
++
++    return A_OK;
++}
++
++A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_ADD_WOW_PATTERN_CMD *addWowCmd,
++                                 A_UINT8* pattern, A_UINT8* mask,
++                                 A_UINT8 pattern_size)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_ADD_WOW_PATTERN_CMD *cmd;
++    A_UINT8 *filter_mask = NULL;
++
++    size = sizeof (*cmd);
++
++    size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8));
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->filter_list_id = addWowCmd->filter_list_id;
++    cmd->filter_offset = addWowCmd->filter_offset;
++    cmd->filter_size = addWowCmd->filter_size;
++
++    A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size);
++
++    filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size);
++    A_MEMCPY(filter_mask, mask, addWowCmd->filter_size);
++
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
++                              WMI_DEL_WOW_PATTERN_CMD *delWowCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_DEL_WOW_PATTERN_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_set_snr_threshold_params(struct wmi_t *wmip,
++                             WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SNR_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val ||
++        snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val ||
++        snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val ||
++        snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val ||
++        snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val ||
++        snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_clr_rssi_snr(struct wmi_t *wmip)
++{
++    void    *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(int));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_lq_threshold_params(struct wmi_t *wmip,
++                             WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_LQ_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val ||
++        lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val ||
++        lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val ||
++        lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val ||
++        lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val ||
++        lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_TARGET_ERROR_REPORT_BITMASK *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    cmd->bitmask = mask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source)
++{
++    void *osbuf;
++    WMIX_HB_CHALLENGE_RESP_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->cookie = cookie;
++    cmd->source = source;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID,
++                              NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
++                            A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
++                            A_UINT32 valid)
++{
++    void *osbuf;
++    WMIX_DBGLOG_CFG_MODULE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->config.cfgmmask = mmask;
++    cmd->config.cfgtsr = tsr;
++    cmd->config.cfgrep = rep;
++    cmd->config.cfgsize = size;
++    cmd->config.cfgvalid = valid;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID,
++                              NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_stats_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid)
++{
++    void *osbuf;
++    WMI_ADD_BAD_AP_CMD *cmd;
++
++    if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->badApIndex = apIndex;
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex)
++{
++    void *osbuf;
++    WMI_DELETE_BAD_AP_CMD *cmd;
++
++    if (apIndex > WMI_MAX_BAD_AP_INDEX) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->badApIndex = apIndex;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM)
++{
++    void *osbuf;
++    WMI_SET_TX_PWR_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->dbM = dbM;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_txPwr_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on)
++{
++	WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
++					WMI_SHORTSCANRATIO_DEFAULT,
++					DEFAULT_SCAN_CTRL_FLAGS,
++					0};
++
++	if (on) {
++		/* Enable foreground scanning */
++                if (wmi_scanparams_cmd(wmip, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK) {
++			return -EIO;
++		}
++	} else {
++		wmi_disconnect_cmd(wmip);
++		if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0,
++				       0, 0, 0, 0xFF, 0) != A_OK) {
++			return -EIO;
++		}
++	}
++
++	return A_OK;
++}
++
++
++A_UINT16
++wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass)
++{
++	A_UINT16 activeTsids=0;
++
++    LOCK_WMI(wmip);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++    return activeTsids;
++}
++
++A_STATUS
++wmi_get_roam_tbl_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType)
++{
++    void *osbuf;
++    A_UINT32 size = sizeof(A_UINT8);
++    WMI_TARGET_ROAM_DATA *cmd;
++
++    osbuf = A_NETBUF_ALLOC(size);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf));
++    cmd->roamDataType = roamDataType;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
++                      A_UINT8 size)
++{
++    void *osbuf;
++    WMI_SET_ROAM_CTRL_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    A_MEMCPY(cmd, p, size);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
++                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
++                            A_UINT8 size)
++{
++    void *osbuf;
++    WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd;
++
++    /* These timers can't be zero */
++    if(!pCmd->psPollTimeout || !pCmd->triggerTimeout ||
++       !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD ||
++         pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) ||
++       !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD ||
++         pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD))
++        return A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    A_MEMCPY(cmd, pCmd, size);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++/* Send a command to Target to change GPIO output pins. */
++A_STATUS
++wmi_gpio_output_set(struct wmi_t *wmip,
++                    A_UINT32 set_mask,
++                    A_UINT32 clear_mask,
++                    A_UINT32 enable_mask,
++                    A_UINT32 disable_mask)
++{
++    void *osbuf;
++    WMIX_GPIO_OUTPUT_SET_CMD *output_set;
++    int size;
++
++    size = sizeof(*output_set);
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG,
++        set_mask, clear_mask, enable_mask, disable_mask));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    output_set->set_mask                   = set_mask;
++    output_set->clear_mask                 = clear_mask;
++    output_set->enable_mask                = enable_mask;
++    output_set->disable_mask               = disable_mask;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target requesting state of the GPIO input pins */
++A_STATUS
++wmi_gpio_input_get(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    osbuf = A_NETBUF_ALLOC(0);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target that changes the value of a GPIO register. */
++A_STATUS
++wmi_gpio_register_set(struct wmi_t *wmip,
++                      A_UINT32 gpioreg_id,
++                      A_UINT32 value)
++{
++    void *osbuf;
++    WMIX_GPIO_REGISTER_SET_CMD *register_set;
++    int size;
++
++    size = sizeof(*register_set);
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    register_set->gpioreg_id               = gpioreg_id;
++    register_set->value                    = value;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target to fetch the value of a GPIO register. */
++A_STATUS
++wmi_gpio_register_get(struct wmi_t *wmip,
++                      A_UINT32 gpioreg_id)
++{
++    void *osbuf;
++    WMIX_GPIO_REGISTER_GET_CMD *register_get;
++    int size;
++
++    size = sizeof(*register_get);
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    register_get->gpioreg_id               = gpioreg_id;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target acknowledging some GPIO interrupts. */
++A_STATUS
++wmi_gpio_intr_ack(struct wmi_t *wmip,
++                  A_UINT32 ack_mask)
++{
++    void *osbuf;
++    WMIX_GPIO_INTR_ACK_CMD *intr_ack;
++    int size;
++
++    size = sizeof(*intr_ack);
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf));
++
++    intr_ack->ack_mask               = ack_mask;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++A_STATUS
++wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin,
++                          A_UINT8 eCWmax, A_UINT8 aifsn)
++{
++    void *osbuf;
++    WMI_SET_ACCESS_PARAMS_CMD *cmd;
++
++    if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) ||
++        (aifsn > WMI_MAX_AIFSN_ACPARAM))
++    {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->txop   = txop;
++    cmd->eCWmin = eCWmin;
++    cmd->eCWmax = eCWmax;
++    cmd->aifsn  = aifsn;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
++                         A_UINT8 trafficClass, A_UINT8 maxRetries,
++                         A_UINT8 enableNotify)
++{
++    void *osbuf;
++    WMI_SET_RETRY_LIMITS_CMD *cmd;
++
++    if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) &&
++        (frameType != DATA_FRAMETYPE))
++    {
++        return A_EINVAL;
++    }
++
++    if (maxRetries > WMI_MAX_RETRIES) {
++        return A_EINVAL;
++    }
++
++    if (frameType != DATA_FRAMETYPE) {
++        trafficClass = 0;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->frameType    = frameType;
++    cmd->trafficClass = trafficClass;
++    cmd->maxRetries   = maxRetries;
++    cmd->enableNotify = enableNotify;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++void
++wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid)
++{
++    if (bssid != NULL) {
++        A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN);
++    }
++}
++
++A_STATUS
++wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode)
++{
++    void *osbuf;
++    WMI_SET_OPT_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->optMode = optMode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID,
++                         SYNC_BOTH_WMIFLAG));
++}
++
++A_STATUS
++wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
++                      A_UINT8 frmType,
++                      A_UINT8 *dstMacAddr,
++                      A_UINT8 *bssid,
++                      A_UINT16 optIEDataLen,
++                      A_UINT8 *optIEData)
++{
++    void *osbuf;
++    WMI_OPT_TX_FRAME_CMD *cmd;
++    osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd)));
++
++    cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1));
++
++    cmd->frmType    = frmType;
++    cmd->optIEDataLen   = optIEDataLen;
++    //cmd->optIEData     = (A_UINT8 *)((int)cmd + sizeof(*cmd));
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++    A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr));
++    A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl)
++{
++    void *osbuf;
++    WMI_BEACON_INT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->beaconInterval = intvl;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++
++A_STATUS
++wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize)
++{
++    void *osbuf;
++    WMI_SET_VOICE_PKT_SIZE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->voicePktSize = voicePktSize;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++
++A_STATUS
++wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen)
++{
++    void *osbuf;
++    WMI_SET_MAX_SP_LEN_CMD *cmd;
++
++    /* maxSPLen is a two-bit value. If user trys to set anything
++     * other than this, then its invalid
++     */
++    if(maxSPLen & ~0x03)
++        return  A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->maxSPLen = maxSPLen;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_UINT8
++convert_userPriority_to_trafficClass(A_UINT8 userPriority)
++{
++        return  (up_to_ac[userPriority & 0x7]);
++}
++
++A_UINT8
++wmi_get_power_mode_cmd(struct wmi_t *wmip)
++{
++    return wmip->wmi_powerMode;
++}
++
++A_STATUS
++wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance)
++{
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++
++   A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++   A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len);
++
++   return A_OK;
++}
++
++#endif /* CONFIG_HOST_TCMD_SUPPORT*/
++
++A_STATUS
++wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
++{
++    void *osbuf;
++    WMI_SET_AUTH_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->mode = mode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
++{
++    void *osbuf;
++    WMI_SET_REASSOC_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->mode = mode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status)
++{
++    void *osbuf;
++    WMI_SET_LPREAMBLE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold)
++{
++    void *osbuf;
++    WMI_SET_RTS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->threshold = threshold;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status)
++{
++    void *osbuf;
++    WMI_SET_WMM_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID,
++            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg)
++{
++    void *osbuf;
++    WMI_SET_WMM_TXOP_CMD *cmd;
++
++    if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) )
++        return A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->txopEnable = cfg;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID,
++            NO_SYNC_WMIFLAG));
++
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/* WMI  layer doesn't need to know the data type of the test cmd.
++   This would be beneficial for customers like Qualcomm, who might
++   have different test command requirements from differnt manufacturers
++ */
++A_STATUS
++wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len)
++{
++    void *osbuf;
++    char *data;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    osbuf= A_NETBUF_ALLOC(len);
++    if(osbuf == NULL)
++    {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, len);
++    data = A_NETBUF_DATA(osbuf);
++    A_MEMCPY(data, buf, len);
++
++    return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID,
++         NO_SYNC_WMIFLAG));
++}
++
++#endif
++
++A_STATUS
++wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status)
++{
++    void *osbuf;
++    WMI_SET_BT_STATUS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->streamType = streamType;
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd)
++{
++    void *osbuf;
++    WMI_SET_BT_PARAMS_CMD* alloc_cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(alloc_cmd, sizeof(*cmd));
++    A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_keepalive_configured(struct wmi_t *wmip)
++{
++    void *osbuf;
++    WMI_GET_KEEPALIVE_CMD *cmd;
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++    cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_UINT8
++wmi_get_keepalive_cmd(struct wmi_t *wmip)
++{
++    return wmip->wmi_keepaliveInterval;
++}
++
++A_STATUS
++wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval)
++{
++    void *osbuf;
++    WMI_SET_KEEPALIVE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keepaliveInterval = keepaliveInterval;
++    wmip->wmi_keepaliveInterval = keepaliveInterval;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen,
++                  A_UINT8 *ieInfo)
++{
++    void *osbuf;
++    WMI_SET_APPIE_CMD *cmd;
++    A_UINT16 cmdLen;
++
++    if (ieLen > WMI_MAX_IE_LEN) {
++        return A_ERROR;
++    }
++    cmdLen = sizeof(*cmd) + ieLen - 1;
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++
++    cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, cmdLen);
++
++    cmd->mgmtFrmType = mgmtFrmType;
++    cmd->ieLen = ieLen;
++    A_MEMCPY(cmd->ieInfo, ieInfo, ieLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen)
++{
++    void *osbuf;
++    A_UINT8 *data;
++
++    osbuf = A_NETBUF_ALLOC(dataLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, dataLen);
++
++    data = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(data, cmd, dataLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_INT32
++wmi_get_rate(A_INT8 rateindex)
++{
++    if (rateindex == RATE_AUTO) {
++        return 0;
++    } else {
++        return(wmi_rateTable[(A_UINT32) rateindex]);
++    }
++}
++
++void
++wmi_node_return (struct wmi_t *wmip, bss_t *bss)
++{
++	if (NULL != bss)
++	{
++		wlan_node_return (&wmip->wmi_scan_table, bss);
++	}
++}
++
++bss_t *
++wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
++				   A_UINT32 ssidLength, A_BOOL bIsWPA2)
++{
++	bss_t *node = NULL;
++    node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid,
++							   ssidLength, bIsWPA2);
++	return node;
++}
++
++void
++wmi_free_allnodes(struct wmi_t *wmip)
++{
++	wlan_free_allnodes(&wmip->wmi_scan_table);
++}
++
++bss_t *
++wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr)
++{
++	bss_t *ni=NULL;
++	ni=wlan_find_node(&wmip->wmi_scan_table,macaddr);
++	return ni;
++}
++
++A_STATUS
++wmi_dset_open_reply(struct wmi_t *wmip,
++                    A_UINT32 status,
++                    A_UINT32 access_cookie,
++                    A_UINT32 dset_size,
++                    A_UINT32 dset_version,
++                    A_UINT32 targ_handle,
++                    A_UINT32 targ_reply_fn,
++                    A_UINT32 targ_reply_arg)
++{
++    void *osbuf;
++    WMIX_DSETOPEN_REPLY_CMD *open_reply;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip));
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*open_reply));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*open_reply));
++    open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
++
++    open_reply->status                   = status;
++    open_reply->targ_dset_handle         = targ_handle;
++    open_reply->targ_reply_fn            = targ_reply_fn;
++    open_reply->targ_reply_arg           = targ_reply_arg;
++    open_reply->access_cookie            = access_cookie;
++    open_reply->size                     = dset_size;
++    open_reply->version                  = dset_version;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++static A_STATUS
++wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len)
++{
++    WMI_PMKID_LIST_REPLY *reply;
++    A_UINT32 expected_len;
++
++    if (len < sizeof(WMI_PMKID_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_PMKID_LIST_REPLY *)datap;
++    expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN;
++
++    if (len < expected_len) {
++        return A_EINVAL;
++    }
++
++    A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID,
++                           reply->pmkidList);
++
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++A_STATUS
++wmi_dset_data_reply(struct wmi_t *wmip,
++                    A_UINT32 status,
++                    A_UINT8 *user_buf,
++                    A_UINT32 length,
++                    A_UINT32 targ_buf,
++                    A_UINT32 targ_reply_fn,
++                    A_UINT32 targ_reply_arg)
++{
++    void *osbuf;
++    WMIX_DSETDATA_REPLY_CMD *data_reply;
++    int size;
++
++    size = sizeof(*data_reply) + length;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
++
++    data_reply->status                     = status;
++    data_reply->targ_buf                   = targ_buf;
++    data_reply->targ_reply_fn              = targ_reply_fn;
++    data_reply->targ_reply_arg             = targ_reply_arg;
++    data_reply->length                     = length;
++
++    if (status == A_OK) {
++        if (a_copy_from_user(data_reply->buf, user_buf, length)) {
++            return A_ERROR;
++        }
++    }
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++A_STATUS
++wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status)
++{
++    void *osbuf;
++    char *cmd;
++
++	wps_enable = status;
++
++    osbuf = a_netbuf_alloc(sizeof(1));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    a_netbuf_put(osbuf, sizeof(1));
++
++    cmd = (char *)(a_netbuf_to_data(osbuf));
++
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd[0] = (status?1:0);
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
+diff --git a/drivers/ar6000/wmi/wmi_doc.h b/drivers/ar6000/wmi/wmi_doc.h
+new file mode 100644
+index 0000000..19cd938
+--- /dev/null
++++ b/drivers/ar6000/wmi/wmi_doc.h
+@@ -0,0 +1,4421 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++
++#if 0
++Wireless Module Interface (WMI) Documentaion
++
++   This section describes the format and the usage model for WMI control and
++   data messages between the host and the AR6000-based targets. The header
++   file include/wmi.h contains all command and event manifest constants as
++   well as structure typedefs for each set of command and reply parameters.
++
++Data Frames
++
++   The data payload transmitted and received by the target follows RFC-1042
++   encapsulation and thus starts with an 802.2-style LLC-SNAP header. The
++   WLAN module completes 802.11 encapsulation of the payload, including the
++   MAC header, FCS, and WLAN security related fields. At the interface to the
++   message transport (HTC), a data frame is encapsulated in a WMI message.
++
++WMI Message Structure
++
++   The WMI protocol leverages an 802.3-style Ethernet header in communicating
++   the source and destination information between the host and the AR6000
++   modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In
++   addition, the WMI protocol adds a header to all data messages:
++
++    {
++    INT8    rssi
++                  The RSSI of the received packet and its units are shown in db above the
++                      noise floor, and the noise floor is shown in dbm.
++    UINT8   info
++                      Contains information on message type and user priority. Message type
++                      differentiates between a data packet and a synchronization message.
++    } WMI_DATA_HDR
++
++   User priority contains the 802.1d user priority info from host to target. Host
++   software translates the host Ethernet format to 802.3 format prior to Tx and
++   802.3 format to host format in the Rx direction. The host does not transmit the
++   FCS that follows the data. MsgType differentiates between a regular data
++   packet (msgType=0) and a synchronization message (msgType=1).
++
++Data Endpoints
++
++   The AR6000 chipset provides several data endpoints to support quality of
++   service (QoS) and maintains separate queues and separate DMA engines for
++   each data endpoint. A data endpoint can be bi-directional.
++
++   Best effort (BE) class traffic uses the default data endpoint (2). The host can
++   establish up to two additional data endpoints for other traffic classes. Once
++   such a data endpoint is established, it sends and receives corresponding QoS
++   traffic in a manner similar to the default data endpoint.
++
++   If QoS is desired over the interconnect, host software must classify each data
++   packet and place it on the appropriate data endpoint. The information
++   required to classify data is generally available in-band as an 802.1p/q style
++   tag or as the ToS field in the IP header. The information may also be available
++   out-of-band depending on the host DDI.
++
++Connection States
++
++   Table B-1 describes the AR6000 WLAN connection states:
++
++   Table B-1.  AR6000 Connection States
++
++Connection State
++    Description
++
++   DISCONNECTED
++    In this state, the AR6000 device is not connected to a wireless
++   network. The device is in this state after reset when it sends the
++   WIRELESS MODULE “READY” EVENT, after it processes a
++   DISCONNECT command, and when it loses its link with the
++   access point (AP) that it was connected to. The device signals a
++   transition to the DISCONNECTED state with a “DISCONNECT”
++   event.
++
++CONNECTED
++    In this state, the AR6000 device is connected to wireless networks.
++   The device enters this state after successfully processing a
++   CONNECT, which establishes a connection with a wireless
++   network. The device signals a transition to the CONNECTED state
++   with a “CONNECT” event.
++
++
++Message Types
++
++   WMI uses commands, replies, and events for the control and configuration of
++   the AR6000 device. The control protocol is asynchronous. Table B-2 describes
++   AR6000 message types:
++
++Table B-2.  AR6000 Message Types
++
++Message Type
++    Description
++
++Commands
++    Control messages that flow from the host to the device
++
++Replies/Events
++    Control messages that flow from the device to the host.
++
++   The device issues a reply to some WMI commands, but not to others.
++   The payload in a reply is command-specific, and some commands do
++   not trigger a reply message at all. Events are control messages issued
++   by the device to signal the occurrence of an asynchronous event.
++
++
++WMI Message Format
++
++   All WMI control commands, replies and events use the header format:
++
++   WMI_CMD_HDR Header Format
++   {
++        UINT16 id
++                 This 16-bit constant identifies which WMI command the host is issuing,
++                 which command the target is replying to, or which event has occurred.
++        WMI_CMD_HDR
++   }
++
++
++   A variable-size command-, reply-, or event-specific payload follows the
++   header. Over the interconnect, all fields in control messages (including
++   WMI_CMD_HDR and the command specific payload) use 32-bit little Endian
++   byte ordering and fields are packed. The AR6000 device always executes
++   commands in order, and the host may send multiple commands without
++   waiting for previous commands to complete. A majority of commands are
++   processed to completion once received. Other commands trigger a longer
++   duration activity whose completion is signaled to the host through an event.
++
++Command Restrictions
++
++   Some commands may only be issued when the AR6000 device is in a certain
++   state. The host is required to wait for an event signaling a state transition
++   before such a command can be issued. For example, if a command requires
++   the device to be in the CONNECTED state, then the host is required to wait
++   for a “CONNECT” event before it issues that command.
++
++   The device ignores any commands inappropriate for its current state. If the
++   command triggers a reply, the device generates an error reply. Otherwise, the
++   device silently ignores the inappropriate command.
++
++Command and Data Synchronization
++
++   WMI provides a mechanism for a host to advise the device of necessary
++   synchronization between commands and data. The device implements
++   synchronization; no implicit synchronization exists between endpoints.
++
++   The host controls synchronization using the “SYNCHRONIZE” command
++   over the control channel and synchronization messages over data channels.
++   The device stops each data channel upon receiving a synchronization message
++   on that channel, processing all data packets received prior to that message.
++   After the device receives synchronization messages for each data endpoint
++   and the “SYNCHRONIZE” command, it resumes all channels.
++
++   When the host must guarantee a command executes before processing new
++   data packets, it first issues the command, then issues the “SYNCHRONIZE”
++   command and sends synchronization messages on data channels. When the
++   host must guarantee the device has processed all old data packets before a
++   processing a new command, it issues a “SYNCHRONIZE” command and
++   synchronization messages on all data channels, then issues the desired
++   command.
++
++
++
++WMI Commands
++
++   ADD_BAD_AP
++    Cause the AR6000 device to avoid a particular AP
++   ADD_CIPHER_KEY
++    Add or replace any of the four AR6000 encryption keys
++   ADD_WOW_PATTERN
++    Used to add a pattern to the WoW pattern list
++   CLR_RSSI_SNR
++    Clear the current calculated RSSI and SNR value
++   CONNECT_CMD
++    Request that the AR6000 device establish a wireless connection
++        with the specified SSID
++   CREATE_PSTREAM
++    Create prioritized data endpoint between the host and device
++   DELETE_BAD_AP
++    Clear an entry in the bad AP table
++   DELETE_CIPHER_KEY
++    Delete a previously added cipher key
++   DELETE_PSTREAM
++    Delete a prioritized data endpoint
++   DELETE_WOW_PATTERN
++    Remove a pre-specified pattern from the WoW pattern list
++   EXTENSION
++    WMI message interface command
++   GET_BIT_RATE
++    Retrieve rate most recently used by the AR6000
++   GET_CHANNEL_LIST
++    Retrieve list of channels used by the AR6000
++   GET_FIXRATES
++    Retrieves the rate-mask set via the SET_FIXRATES command.
++   GET_PMKID_LIST_CMD
++    Retrieve the firmware list of PMKIDs
++   GET_ROAM_DATA
++    Internal use for data collection; available in special build only
++   GET_ROAM_TBL
++    Retrieve the roaming table maintained on the target
++   GET_TARGET_STATS
++    Request that the target send the statistics it maintains
++   GET_TX_PWR
++    Retrieve the current AR6000 device Tx power levels
++   GET_WOW_LIST
++    Retrieve the current list of WoW patterns
++   LQ_THRESHOLD_PARAMS
++    Set the link quality thresholds
++   OPT_TX_FRAME
++    Send a special frame (special feature)
++   RECONNECT
++    Request a reconnection to a BSS
++   RSSI_THRESHOLD_PARAMS
++    Configure how the AR6000 device monitors and reports signal
++       strength (RSSI) of the connected BSS
++   SCAN_PARAMS
++    Determine dwell time and changes scanned channels
++   SET_ACCESS_PARAMS
++    Set access parameters for the wireless network
++   SET_ADHOC_BSSID
++    Set the BSSID for an ad hoc network
++   SET_AKMP_PARAMS
++    Set multiPMKID mode
++   SET_APPIE
++    Add application-specified IE to a management frame
++   SET_ASSOC_INFO
++    Specify the IEs the device should add to association or
++        reassociation requests
++   SET_AUTH_MODE
++    Set 802.11 authentication mode of reconnection
++   SET_BEACON_INT
++    Set the beacon interval for an ad hoc network
++   SET_BIT_RATE
++    Set the AR6000 to a specific fixed bit rate
++   SET_BMISS_TIME
++    Set the beacon miss time
++   SET_BSS_FILTER
++    Inform the AR6000 of network types about which it wants to
++        receive information using a “BSSINFO” event
++   SET_BT_PARAMS
++    Set the status of a Bluetooth stream (SCO or A2DP) or set
++        Bluetooth coexistence register parameters
++   SET_BT_STATUS
++    Set the status of a Bluetooth stream (SCO or A2DP)
++   SET_CHANNEL_PARAMETERS
++    Configure WLAN channel parameters
++   SET_DISC_TIMEOUT
++    Set the amount of time the AR6000 spends attempting to
++        reestablish a connection
++   SET_FIXRATES
++    Set the device to a specific fixed PHY rate (supported subset)
++   SET_HALPARAM
++    Internal AR6000 command to set certain hardware parameters
++   SET_HOST_SLEEP_MODE
++    Set the host mode to asleep or awake
++   SET_IBSS_PM_CAPS
++    Support a non-standard power management scheme for an
++        ad hoc network
++   SET_LISTEN_INT
++    Request a listen interval
++   SET_LPREAMBLE
++    Override the short preamble capability of the AR6000 device
++   SET_MAX_SP_LEN
++    Set the maximum service period
++   SET_OPT_MODE
++    Set the special mode on/off (special feature)
++   SET_PMKID
++    Set the pairwise master key ID (PMKID)
++   SET_PMKID_LIST_CMD
++    Configure the firmware list of PMKIDs
++   SET_POWER_MODE
++    Set guidelines on trade-off between power utilization
++   SET_POWER_PARAMS
++    Configure power parameters
++   SET_POWERSAVE_PARAMS
++    Set the two AR6000 power save timers
++   SET_PROBED_SSID
++    Provide list of SSIDs the device should seek
++   SET_REASSOC_MODE
++    Specify whether the disassociated frame should be sent upon
++        reassociation
++   SET_RETRY_LIMITS
++    Limit how many times the device tries to send a frame
++   SET_ROAM_CTRL
++    Control roaming behavior
++   SET_RTS
++    Determine when RTS should be sent
++   SET_SCAN_PARAMS
++    Set the AR6000 scan parameters
++   SET_TKIP_COUNTERMEASURES
++    Enable/disable reports of TKIP MIC errors
++   SET_TX_PWR
++    Specify the AR6000 device Tx power levels
++   SET_VOICE_PKT_SIZE
++    Set voice packet size
++   SET_WMM
++    Override the AR6000 WMM capability
++   SET_WMM_TXOP
++    Configure TxOP bursting when sending traffic to a WMM-
++    capable AP
++   SET_WOW_MODE
++    Enable/disable WoW mode
++   SET_WSC_STATUS
++    Enable/disable profile check in cserv when the WPS protocol
++    is in progress
++   SNR_THRESHOLD_PARAMS
++    Configure how the device monitors and reports SNR of BSS
++   START_SCAN
++    Start a long or short channel scan
++   SYNCHRONIZE
++    Force a synchronization point between command and data
++    paths
++   TARGET_REPORT_ERROR_BITMASK
++    Control “ERROR_REPORT” events from the AR6000
++
++
++
++
++Name
++    ADD_BAD_AP
++
++Synopsis
++    The host uses this command to cause the AR6000 to avoid a particular AP. The
++    AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command
++    adds or replaces the specified entry in this bad AP table.
++
++    If the AR6000 are currently connected to the AP specified in this command, they
++    disassociate.
++
++Command
++    wmiconfig eth1 --badap <bssid> <badApIndex>
++
++Command Parameters
++    UINT8 badApIndex    Index [0...1] that identifies which entry in the
++                        bad AP table to use
++
++
++    UINT8 bssid[6]  MAC address of the AP to avoid
++
++Command Values
++    badApIndex = 0, 1    Entry in the bad AP table to use
++
++Reset Value
++    The bad AP table is cleared
++
++Restrictions
++    None
++
++See Also
++    “DELETE_BAD_AP” on page B-13
++
++=====================================================================
++Name
++    ADD_CIPHER_KEY
++
++Synopsis
++    The host uses this command to add/replace any of four encryption keys on the
++    AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event
++    has been received by the host for all dot11Auth modes except for SHARED_AUTH.
++    When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY
++    command should be issued before the “CONNECT” command.
++
++Command
++    wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage>
++                            <keyLength> <keyopctrl> <keyRSC> <key>
++
++Command Parameters
++    UINT8 keyIndex      Index (0...3) of the key to add/replace;
++                        uniquely identifies the key
++    UINT8 keyType    CRYPTO_TYPE
++    UINT8 keyUsage   Specifies usage parameters of the key when
++                     keyType = WEP_CRYPT
++    UINT8 keyLength  Length of the key in bytes
++    UINT8 keyOpCtrl  bit[0] = Initialize TSC (default),
++                     bit[1] = Initialize RSC
++    UINT8 keyRSC[8]  Key replay sequence counter (RSC) initial
++                     value the device should use
++    UINT8 key[32]    Key material used for this connection
++    Command Values
++    {
++        NONE_CRYPT = 1
++        WEP_CRYPT  = 2
++        TKIP_CRYPT = 3
++        AES_CRYPT  = 4
++        KEY_OP_INIT_TSC   0x01
++        KEY_OP_INIT_RSC   0x02
++        KEY_OP_INIT_VAL   0x03
++                Default is to Initialize the TSC
++        KEY_OP_VALID_MASK 0x04
++                Two operations defined
++    } CRYPTO_TYPE
++
++    {
++        PAIRWISE_USAGE  = 0  Set if the key is used for unicast traffic only
++        GROUP_USAGE     = 1  Set if the key is used to receive multicast
++                              traffic (also set for static WEP keys)
++        TX_USAGE        = 2  Set for the GROUP key used to transmit frames
++                All others are reserved
++    } KEY_USAGE
++
++Reset Value
++    The four available keys are disabled.
++
++Restrictions
++    The cipher should correspond to the encryption mode specified in the “CONNECT”
++    command.
++
++See Also
++    “DELETE_CIPHER_KEY”
++
++=====================================================================
++
++
++Name
++    ADD_WOW_PATTERN
++
++Synopsis
++    The host uses this command to add a pattern to the WoW pattern list; used for
++    pattern-matching for host wakeups by the WoW module. If the host mode is asleep
++    and WoW is enabled, all packets are matched against the existing WoW patterns. If a
++    packet matches any of the patterns specified, the target will wake up the host. All
++    non-matching packets are discarded by the target without being sent up to the host.
++
++Command
++    wmiconfig –addwowpattern <list-id> <filter-size> <filter-offset>
++    <pattern> <mask>
++
++Command Parameters
++    A_UINT8  filter_list_id    ID of the list that is to include the new pattern
++    A_UINT8  filter_size       Size of the new pattern
++    A_UINT8  filter_offset     Offset at which the pattern matching for this
++                                new pattern should begin at
++    A_UINT8  filter[1]         Byte stream that contains both the pattern and
++                                the mask of the new WoW wake-up pattern
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined (default host mode is awake)
++
++Restrictions
++    None
++
++See Also
++    “DELETE_WOW_PATTERN”
++
++=====================================================================
++
++
++Name
++    CLR_RSSI_SNR
++
++Synopsis
++    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
++    running-average value. This command will clear the history and have a fresh start
++    for the running-average mechanism.
++
++Command
++    wmiconfig eth1 --cleanRssiSnr
++
++Command Parameters
++    None
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++Name
++    CONNECT_CMD
++
++Synopsis
++    New connect control information (connectCtrl) is added, with 32 possible modifiers.
++
++    CONNECT_SEND_REASSOC
++        Valid only for a host-controlled connection to a
++        particular AP. If this bit is set, a reassociation frame is
++        sent. If this bit is clear, an association request frame is
++        sent to the AP.
++
++    CONNECT_IGNORE_WPAx_GROUP_CIPHER
++        No group key is issued in the CONNECT command,
++        so use the group key advertised by the AP. In a target-
++        initiated roaming situation this allows a STA to roam
++        between APs that support different multicast ciphers.
++
++    CONNECT_PROFILE_MATCH_DONE
++        In a host-controlled connection case, it is possible that
++        during connect, firmware may not have the
++        information for a profile match (e.g, when the AP
++        supports hidden SSIDs and the device may not
++        transmit probe requests during connect). By setting
++        this bit in the connection control information, the
++        firmware waits for a beacon from the AP with the
++        BSSID supplied in the CONNECT command. No
++        additional profile checks are done.
++
++    CONNECT_IGNORE_AAC_BEACON
++        Ignore the Admission Capacity information in the
++        beacon of the AP
++
++    CONNECT_ASSOC_POLICY_USER
++        When set, the CONNECT_SEND_REASSOC setting
++        determines if an Assoc or Reassoc is sent to an AP
++
++Command
++    wmiconfig --setconnectctrl <ctrl flags bitmask>
++
++Command Parameters
++    typedef struct{
++    A_UINT8 networktype;
++    A_UINT8 dot11authmode;
++    A_UINT8 authmode;
++    A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/
++    A_UINT8 pairwiseCryptoLen;
++    A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/
++    A_UINT8 groupCryptoLen;
++    A_UINT8 ssidLength;
++    A_UCHAR ssid[WMI_MAX_SSID_LEN];
++    A_UINT16 channel;
++    A_UINT8 bssid[AUTH_MAC_LEN];
++    A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/
++    } WMI_CONNECT_CMD;
++
++    ctrl flags bitmask
++        = 0x0001 CONNECT_ASSOC_POLICY_USER
++            Assoc frames are sent using the policy specified by
++            the flag
++        = 0x0002 CONNECT_SEND_REASSOC
++            Send Reassoc frame while connecting, otherwise send
++            assoc frames
++        = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER
++            Ignore WPAx group cipher for WPA/WPA2
++        = 0x0008 CONNECT_PROFILE_MATCH_DONE
++            Ignore any profile check
++        = 0x0010 CONNECT_IGNORE_AAC_BEACON
++            Ignore the admission control information in the
++            beacon
++        ... CONNECT_CMD, continued
++        Command Values
++        typedef enum {
++            INFRA_NETWORK       = 0x01,
++            ADHOC_NETWORK       = 0x02,
++            ADHOC_CREATOR       = 0x04,
++        } NETWORK_TYPE;
++
++        typedef enum {
++            OPEN_AUTH           = 0x01,
++            SHARED_AUTH         = 0x02,
++            LEAP_AUTH           = 0x04,
++        } DOT11_AUTH_MODE;
++        typedef enum {
++            NONE_AUTH           = 0x01,
++            WPA_AUTH            = 0x02,
++            WPA_PSK_AUTH        = 0x03,
++            WPA2_AUTH           = 0x04,
++            WPA2_PSK_AUTH       = 0x05,
++            WPA_AUTH_CCKM       = 0x06,
++            WPA2_AUTH_CCKM      = 0x07,
++        } AUTH_MODE;
++        typedef enum {
++            NONE_CRYPT          = 0x01,
++            WEP_CRYPT           = 0x02,
++            TKIP_CRYPT          = 0x03,
++            AES_CRYPT           = 0x04,
++        } CRYPTO_TYPE;
++        typedef enum {
++            CONNECT_ASSOC_POLICY_USER = 0x0001,
++            CONNECT_SEND_REASSOC = 0x0002,
++            CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
++            CONNECT_PROFILE_MATCH_DONE = 0x0008,
++            CONNECT_IGNORE_AAC_BEACON = 0x0010,
++        } WMI_CONNECT_CTRL_FLAGS_BITS;
++
++    pairwiseCryptoLen and groupCryptoLen are valid when the respective
++    CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in
++    bytes.
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    CREATE_PSTREAM
++
++Synopsis
++    The host uses this command to create a new prioritized data endpoint between the
++    host and the AR6000 device that carries a prioritized stream of data. If the AP that the
++    device connects to requires TSPEC stream establishment, the device requests the
++    corresponding TSPEC with the AP. The maximum and minimum service interval
++    ranges from 0 – 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a
++    reply event for this command, as it is always assumed the command has succeeded.
++    An AP admission control response comes to the host via a WMI_CAC_INDICATION
++    event, once the response for the ADDTS frame comes.
++
++    Examples of cases where reassociation is generated (when WMM) and cases where
++    ADDTS is generated (when WMM and enabling ACM) are when:
++        Changing UAPSD flags in WMM mode, reassociation is generated
++        Changing the interval of sending auto QoS Null frame in WMM mode;
++            reassociation is not generated
++        Issuing a command with same previous parameters in WMM mode and enabling
++            ACM, an ADDTS request is generated
++        Changing the interval of a QoS null frame sending in WMM mode and enabling
++            ACM, an ADDTS request is generated
++        Issuing the command in disconnected state, reassociation or ADDTS is not
++            generated but the parameters are available after (re)association
++
++Command
++    --createqos <user priority> <direction> <traffic class>
++<trafficType> <voice PS capability> <min service interval> <max
++service interval> <inactivity interval> <suspension interval>
++<service start time> <tsid> <nominal MSDU> <max MSDU> <min data
++rate> <mean data rate> <peak data rate> <max burst size> <delay
++bound> <min phy rate> <sba> <medium time> where:
++
++    <user priority>
++    802.1D user priority range (0–7)
++    <direction>
++        = 0    Tx (uplink) traffic
++        = 1    Rx (downlink) traffic
++        = 2    Bi-directional traffic
++    <traffic class>
++        = 1    BK
++        = 2    VI
++        = 3    VO
++    <trafficType>
++        = 0    Aperiodic
++        = 1    Periodic
++    <voice PS capability>
++        Specifies whether the voice power save mechanism
++    (APSD if AP supports it or legacy/simulated APSD
++    [using PS-Poll]) should be used
++        = 0    Disable voice power save for traffic class
++        = 1    Enable APSD voice power save for traffic class
++        = 2    Enable voice power save for all traffic classes
++    <min service interval>
++        (In ms)
++    <max service interval>
++        Inactivity interval (in ms) (0 = Infinite)
++    <suspension interval>
++        (In ms)
++    <service start time>
++        Service start time
++    <tsid>
++        TSID range (0–15)
++    <nominal MSDU>
++        Nominal MAC SDU size
++    <max MSDU>
++        Maximum MAC SDU size
++    <min data rate>
++        Minimum data rate (in bps)
++    <mean data rate>
++        Mean data rate (in bps)
++    <peak data rate>
++        Peak data rate (in bps)
++    <max burst size>
++        Maximum burst size (in bps)
++    <delay bound>
++        Delay bound
++    <min phy rate>
++        Minimum PHY rate (in bps)
++    <sba>
++        Surplus bandwidth allowance
++    <medium time>
++        Medium time in TU of 32-ms periods per sec
++    ... CREATE_PSTREAM (continued)
++
++Command Parameters
++    UINT8 trafficClass    TRAFFIC_CLASS value
++    UINT8 traffic
++    Direction
++    DIR_TYPE value
++    UINT8    rxQueueNum
++        AR6000 device mailbox index (2 or 3)
++        corresponding to the endpoint the host
++        wishes to use to receive packets for the
++        prioritized stream
++    UINT8 trafficType  TRAFFIC_TYPE value
++    UINT8 voicePS
++Capability
++    VOICEPS_CAP_TYPE value
++    UINT8 tsid          Traffic stream ID
++    UINT8 userPriority  802.1D user priority
++    UINT16 nominalMSDU  Nominal MSDU in octets
++    UINT16 maxMSDU      Maximum MSDU in octets
++    UINT32 minServiceInt Minimum service interval: the min.
++                            period of traffic specified (in ms)
++    UINT32 maxServiceInt  Maximum service interval: the max.
++                        period of traffic specified (in ms)
++    UINT32 inactivityInt Indicates how many ms an established
++                        stream is inactive before the prioritized
++                        data endpoint is taken down and the
++                        corresponding T-SPEC deleted
++    UINT32 suspensionInt  Suspension interval (in ms)
++    UINT32 service       StartTime Service start time
++    UINT32 minDataRate  Minimum data rate (in bps)
++    UINT32 meanDataRate Mean data rate (in bps)
++    UINT32 peakDataRate Peak data rate (in bps)
++    UINT32 maxBurstSize
++    UINT32 delayBound
++    UINT32 minPhyRate   Minimum PHY rate for TSPEC (in bps)
++    UINT32 sba          Surplus bandwidth allowance
++    UINT32 mediumTime   Medium TSPEC time (in units of 32 ms)
++Command Values
++    {
++        WMM_AC_BE = 0   Best Effort
++        WMM_AC_BK = 1   Background
++        WMM_AC_VI = 2   Video
++        WMM_AC_VO = 3   Voice
++        All other values reserved
++    } TRAFFIC_CLASS
++    {
++        UPLINK_TRAFFIC   = 0  From the AR6000 device to the AP
++        DOWNLINK_TRAFFIC = 1  From the AP to the AR6000 device
++        BIDIR_TRAFFIC    = 2  Bi-directional traffic
++        All other values reserved
++    } DIR_TYPE
++    {
++        DISABLE_FOR_THIS_AC = 0
++        ENABLE_FOR_THIS_AC  = 1
++        ENABLE_FOR_ALL_AC   = 2
++        All other values reserved
++    } VOICEPS_CAP_TYPE
++
++    ... CREATE_PSTREAM (continued)
++
++
++        VI  BE   BK    Supported, Y/N?
++   0    0    0    0    Y
++   0    0    0    1    Y
++   0    0    1    0    N
++   0    0    1    1    N
++   0    1    0    0    Y
++   0    1    0    1    Y
++   0    1    1    0    N
++   0    1    1    1    N
++   1    0    0    0    Y
++   1    0    0    1    Y
++   1    0    1    0    N
++   1    1    0    0    N
++   1    1    0    1    Y
++   1    1    0    0    N
++   1    1    1    0    N
++   1    1    1    1    Y
++
++Reset Value
++    No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created
++    (either implicitly by data flow or explicitly by user)
++
++Restrictions
++    This command can only be issued when the device is in the CONNECTED state. If
++    the device receives the command while in DISCONNECTED state, it replies with a
++    failure indication. At most four prioritized data endpoints can be created, one for
++    each AC.
++
++See Also
++    “DELETE_PSTREAM”
++=====================================================================
++
++Name
++    DELETE_BAD_AP
++
++Synopsis
++    The host uses this command to clear a particular entry in the bad AP table
++
++Command
++    wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP
++    entry. num is index from 0-3
++
++Command Parameters
++    UINT8  badApIndex   Index [0...n] that identifies the entry in the bad
++                        AP table to delete
++
++Command Values
++    badApIndex   = 0, 1, 2, 3
++            Entry in the bad AP table
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    “ADD_BAD_AP”
++
++=====================================================================
++
++
++Name
++    DELETE_CIPHER_KEY
++
++Synopsis
++    The host uses this command to delete a key that was previously added with the
++    “ADD_CIPHER_KEY” command.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8   keyIndex    Index (0...3) of the key to be deleted
++
++Command Values
++    keyIndex    = 0, 1,2, 3    Key to delete
++
++Reset Value
++    None
++
++Restrictions
++    The host should not delete a key that is currently in use by the AR6000.
++
++See Also
++    “ADD_CIPHER_KEY”
++
++=====================================================================
++
++Name
++    DELETE_PSTREAM
++
++Synopsis
++    The host uses this command to delete a prioritized data endpoint created by a
++    previous “CREATE_PSTREAM” command
++
++Command
++    --deleteqos <trafficClass> <tsid>, where:
++
++    <traffic class>
++        = 0    BE
++        = 1    BK
++        = 2    VI
++        = 3    VO
++    <tsid>
++        The TSpec ID; use the -qosqueue option
++        to get the active TSpec IDs for each traffic class
++
++Command Parameters
++    A_UINT8    trafficClass    Indicate the traffic class of the stream
++                            being deleted
++
++Command Values
++    {
++        WMM_AC_BE = 0    Best effort
++        WMM_AC_BK = 1    Background
++        WMM_AC_VI = 2    Video
++        WMM_AC_VO = 3    Voice
++    } TRAFFIC CLASS
++
++    0-15 for TSID
++
++Reply Values
++    N/A
++
++Restrictions
++    This command should only be issued after a “CREATE_PSTREAM” command has
++    successfully created a prioritized stream
++
++See Also
++    “CREATE_PSTREAM”
++
++=====================================================================
++
++
++Name
++    DELETE_WOW_PATTERN
++
++Synopsis
++    The host uses this command to remove a pre-specified pattern from the
++    WoW pattern list.
++
++Command
++    wmiconfig –delwowpattern <list-id> <pattern-id>
++
++Command Parameters
++    A_UINT8    filter_list_id    ID of the list that contains the WoW filter
++                                 pattern to delete
++    A_UINT8    filter_id    ID of the WoW filter pattern to delete
++
++Reply Parameters
++    None
++
++
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    “ADD_WOW_PATTERN”
++
++=====================================================================
++
++
++Name
++    EXTENSION
++
++Synopsis
++    The WMI message interface is used mostly for wireless control messages to a wireless
++    module applicable to wireless module management regardless of the target platform
++    implementation. However, some commands only peripherally related to wireless
++    management are desired during operation. These wireless extension commands may
++    be platform-specific or implementation-dependent.
++
++Command
++    N/A
++
++Command Parameters
++    Command-specific
++
++Command Values
++    Command-specific
++
++Reply Parameters
++    Command-specific
++
++Reset Values
++    None defined
++
++Restrictions
++    None defined
++
++=====================================================================
++
++
++Name
++    GET_BIT_RATE
++
++Synopsis
++    Used by the host to obtain the rate most recently used by the AR6000 device
++
++Command
++    wmiconfig eth1 --getfixrates
++
++Command Parameters
++    None
++
++
++
++Reply Parameters
++    INT8
++    rateIndex
++    See the “SET_BIT_RATE” command
++
++Reset Values
++    None
++
++Restrictions
++    This command should only be used during development/debug; it is not intended
++for use in production. It is only valid when the device is in the CONNECTED state
++
++See Also
++    “SET_BIT_RATE”
++
++=====================================================================
++
++
++Name
++    GET_CHANNEL_LIST
++
++Synopsis
++    Used by the host uses to retrieve the list of channels that can be used by the device
++    while in the current wireless mode and in the current regulatory domain.
++
++Command
++    TBD
++
++Command Parameters
++    None
++
++Reply Parameters
++    UINT8    reserved    Reserved
++    UINT8    numberOfChannels    Number of channels the reply contains
++    UINT16    channelList[numberOfChannels]  Array of channel frequencies (in MHz)
++
++Reset Values
++    None defined
++
++Restrictions
++    The maximum number of channels that can be reported are 32
++
++=====================================================================
++
++
++Name
++    GET_FIXRATES
++
++Synopsis
++    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
++    running-average value. This command will clear the history and have a fresh start for
++    the running-average mechanism.
++
++Synopsis
++    This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate
++    that the AR6001 or AR6001 is using. See “SET_FIXRATES”.
++
++Command
++    wmiconfig eth1 --getfixrates
++
++Command Parameters
++    A_UINT16    fixRateMask;    Note: if this command is used prior to
++                using WMI_SET_FIXRATES, AR6000
++                returns 0xffff as fixRateMask, indicating
++                all the rates are enabled
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    “SET_FIXRATES”
++
++=====================================================================
++
++
++
++Name
++    GET_PMKID_LIST_CMD
++
++Synopsis
++    Retrieves the list of PMKIDs on the firmware. The
++    WMI_GET_PMKID_LIST_EVENT is generated by the firmware.
++
++Command
++    TBD
++
++Command Parameters
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++See Also
++    SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT
++
++=====================================================================
++
++
++Name
++    GET_ROAM_TBL
++
++Synopsis
++    Retrieve the roaming table maintained on the target. The response is reported
++    asynchronously through the ROAM_TBL_EVENT.
++
++Command
++    wmiconfig --getroamtable <roamctrl> <info>
++
++Command Parameters
++    A_UINT8    roamCtrlType;
++    A_UINT16   roamMode
++    A_UINT16   numEntries
++    WMI_BSS_ROAM_INFO bssRoamInfo[1]
++
++Reply Value
++    Reported asynchronously through the ROAM_TBL_EVENT
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    SET_KEEPALIVE
++
++=====================================================================
++
++
++Name
++    GET_TARGET_STATS
++
++Synopsis
++    The host uses this command to request that the target send the statistics that it
++    maintains. The statistics obtained from the target are accrued in the host every time
++    the GET_TARGET_STATS command is issued. The --clearStats option is added to
++    clear the target statistics maintained in the host.
++
++Command
++    wmiconfig --getTargetStats --clearStats
++
++Command Parameters
++    TARGET_STATS    targetStats
++    WMI_TARGET_STATS
++    UINT8   clearStats
++
++
++Reply Value
++    RSSI return value (0–100)
++
++Reset Values
++    All statistics are cleared (zeroed)
++
++Restrictions
++    The --getTargetStats option must be used; the --clearStats option is also available also
++
++
++=====================================================================
++
++Name
++    GET_TX_PWR
++
++Synopsis
++    The host uses this command to retrieve the current Tx power level
++
++Command
++    wmiconfig -i eth1 --getpower
++
++Command Parameters
++    None
++
++Reply Parameters
++    UINT16 dbM    The current Tx power level specified in dbM
++
++Reset Values
++    The maximum permitted by the regulatory domain
++
++Restrictions
++    None
++
++See Also
++    “SET_TX_PWR”
++
++=====================================================================
++
++
++Name
++    GET_WOW_LIST
++
++Synopsis
++    The host uses this command to retrieve the current list of WoW patterns.
++
++Command
++    wmiconfig –getwowlist <list-id>
++
++Command Parameters
++    A_UINT8 filter_list_id    ID of the list of WoW patterns to retrieve
++
++Reply Value(s)
++    A_UINT16  num_filters    Number of WoW patterns contained in the list
++    A_UINT8   wow_mode    Current mode of WoW (enabled or disabled)
++    A_UINT8    host_mode    Current host mode (asleep or awake)
++    WOW_FILTER    wow_filters[1]
++        Contents of the WoW filter pattern list
++        (contains mask, pattern, offset and size
++    information for each of the patterns)
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    “SET_WSC_STATUS”
++
++=====================================================================
++
++
++Name
++    LQ_THRESHOLD_PARAMS
++
++Synopsis
++    Sets Link Quality thresholds, the sampling will happen at every unicast data frame
++    Tx if a certain threshold is met, and the corresponding event will be sent to the host.
++
++Command
++    --lqThreshold <enable> <upper_threshold_1> ...
++    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
++
++Command Parameters
++    <enable>    = 0    Disable link quality sampling
++                = 1    Enable link quality sampling
++    <upper_threshold_x>  Above thresholds (value in [0,100]), in
++                    ascending order
++    <lower_threshold_x> Below thresholds (value in [0,100]), in
++                    ascending order
++
++Command Values
++    See command parameters
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    OPT_TX_FRAME
++
++Synopsis
++    Special feature, sends a special frame.
++
++Command
++    wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen>
++    <optIEData>
++
++Command Parameters
++    {
++        A_UINT16    optIEDataLen;
++        A_UINT8    frmType;
++        A_UINT8    dstAddr[ATH_MAC_LEN];
++        A_UINT8    bssid[ATH_MAC_LEN];
++        A_UINT8    optIEData[1];
++    } WMI_OPT_TX_FRAME_CMD;
++
++Command Values
++    <frmtype>   = 1    Probe request frame
++                = 2    Probe response frame
++                = 3    CPPP start
++                = 4    CPPP stop
++
++Reset Value
++    None defined
++
++Restrictions
++    Send a special frame only when special mode is on.
++
++=====================================================================
++
++
++Name
++    RECONNECT
++
++Synopsis
++    This command requests a reconnection to a BSS to which the AR6000 device was
++    formerly connected
++
++Command
++    TBD
++
++Command Parameters
++    UINT16    channel    Provides a hint as to which channel was
++                        used for a previous connection
++    UINT8    bssid[6]    If set, indicates which BSSID to connect to
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++See Also
++    “CONNECT_CMD”
++
++=====================================================================
++
++
++Name
++    RSSI_THRESHOLD_PARAMS
++
++Synopsis
++    Configures how the AR6000 device monitors and reports signal strength (RSSI) of the
++    connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in
++    dbM) of the host specification divide the signal strength range into six segments.
++    When signal strength increases or decreases across one of the boundaries, an
++    RSSI_THRESHOLD event is signaled to the host. The host may then choose to take
++    action (such as influencing roaming).
++
++Command
++    wmiconfig eth1 --rssiThreshold <weight> <pollTime>
++        <above_threshold_val_1> ... <above_threshold_tag_6>
++        <above_threshold_val_6>
++        <below_threshold_tag_1> <below_threshold_val_1> ...
++        <below_threshold_tag_6> <below_threshold_val_6>
++
++Command Parameters
++    UINT8    weight    Range in [1, 16] used to calculate average RSSI
++    UINT32   pollTime   RSSI (signal strength) sampling frequency in
++                seconds (if pollTime = 0, single strength
++        sampling is disabled)
++    USER_RSS__THOLD tholds[12]  Thresholds (6 x 2)
++
++Command Values
++    None defined
++
++Reset Values
++    pollTime is 0, and sampling is disabled
++
++Restrictions
++    Can only be issued if the AR6000 device is connected
++
++
++=====================================================================
++
++Name
++    SCAN_PARAMS
++
++Synopsis
++    The minact parameter determines the minimum active channel dwell time, within
++    which if the STA receives any beacon, it remains on that channel until the maxact
++    channel dwell time. If the STA does not receive a beacon within the minact dwell
++    time, it switches to scan the next channel.
++
++Command
++    wmiconfig -scan -minact=<ms> --maxact=<ms>
++
++Command Parameters
++    UINT16    maxact    Channel dwell time (in ms), default = 0
++    UINT16    minact    Channel dwell time (in ms), default = 105
++
++Command Values
++    See channel parameters
++
++Reset Values
++    None defined
++
++Restrictions
++    The minact value should be greater than 0; maxact should be between 5–65535 ms
++    and greater than minact
++
++=====================================================================
++
++
++Name
++    SET_ACCESS_PARAMS
++
++Synopsis
++    Allows the host to set access parameters for the wireless network. A thorough
++    understanding of IEEE 802.11 is required to properly manipulate these parameters.
++
++Command
++    wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15>
++    --cwmax <0-15> --aifsn<0-15>
++
++Command Parameters
++    UINT16    txop    The maximum time (expressed in units of
++                        32 ms) the device can spend transmitting
++                        after acquiring the right to transmit
++    UINT8    eCWmin    Minimum contention window
++    UINT8    eCWmax    Maximum contention window
++    UINT8    aifsn    The arbitration inter-frame space number
++
++Command Values
++    None
++
++Reset Values
++    Reasonable defaults that vary, between endpoints (prioritized streams)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_ADHOC_BSSID
++
++Synopsis
++    Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID
++    is not found, the target creates an ad hoc network with this BSSID after the connect
++    WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL).
++
++Command
++    wmiconfig eth1 --adhocbssid <bssid>
++
++Command Parameters
++    A_UINT8     bssid[ATH_MAC_LEN]    BSSID is specified in xx:xx:xx:xx:xx:xx format
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_AKMP_PARAMS
++
++Synopsis
++    Enables or disables multi PMKID mode.
++
++Command
++    wmiconfig eth1 --setakmp --multipmkid=<on/off>
++
++Command Parameters
++    typedef struct {
++      A_UINT32    akmpInfo;
++    } WMI_SET_AKMP_PARAMS_CMD;
++
++Command Values
++    akmpInfo;
++    bit[0] = 0
++        MultiPMKID mode is disabled and PMKIDs that
++        were set using the WMI_SET_PMKID_CMD are
++        used in the [Re]AssocRequest frame.
++     bit[0] = 1
++        MultiPMKID mode is enabled and PMKIDs issued
++        by the WMI_SET_PMKID_LIST_CMD are used in
++        the next [Re]AssocRequest sent to the AP.
++
++Reset Values
++    MultiPMKID mode is disabled
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_APPIE
++
++Synopsis
++    Add an application-specified IE to a management frame. The maximum length is
++    76 bytes. Including the length and the element ID, this translates to 78 bytes.
++
++Command
++    wmiconfig --setappie <frame> <IE>, where:
++
++    frame
++        One of beacon, probe, respon, assoc
++
++    IE
++        A hex string beginning with DD (if = 0, no
++        IE is sent in the management frame)
++
++Command Parameters
++    mgmtFrmType;
++        A WMI_MGMT_FRAME_TYPE
++
++    ieLen;
++        Length of the IE to add to the GMT frame
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    Supported only for the probe request and association request management frame
++types. Also, only one IE can be added per management frame type.
++
++=====================================================================
++
++
++Name
++    SET_ASSOC_INFO
++
++Synopsis
++    The host uses this command to specify any information elements (IEs) it wishes the
++    AR6000 device to add to all future association and reassociation requests. IEs must be
++    correct and are used as is by the device. IEs specified through this command are
++    cleared with a DISCONNECT.
++
++Command
++    wmiconfig eth1 --setAssocIe <IE>
++
++Command Parameters
++    UINT8    ieType    Used directly in 802.11 frames
++    UINT8    bufferSize    Size of assocInfo (in bytes) ranging from
++                        0–240. If = 0, previously set IEs are cleared.
++    UINT8    assocInfo[bufferSize]    Used directly in 802.11 frames
++
++Command Values
++    None
++
++Reset Values
++    IEs are cleared
++
++Restrictions
++    This command can only be issued in the DISCONNECTED state
++
++=====================================================================
++
++
++Name
++    SET_AUTHMODE
++
++Synopsis
++    Sets the 802.11 authentication mode of reconnection
++
++Command
++    wmiconfig eth1 --setauthmode <mode>
++
++Command Parameters
++    UINT8    mode
++
++Command Values
++    mode    = 0x00    Proceed with authentication during reconnect
++            = 0x01    Do not proceed with authentication during reconnect
++
++Reset Values
++    Authentication
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BEACON_INT
++
++Synopsis
++    Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
++    impact on power savings. To some degree, a longer interval reduces power
++    consumption but also decreases throughput. A thorough understanding of IEEE
++    802.11 ad hoc networks is required to use this command effectively.
++
++Command
++    wmiconfig eth1 --ibssconintv
++
++Command Parameters
++    UINT16    beaconInterval    Specifies the beacon interval in TU units (1024 ms)
++
++Command Values
++    None
++
++Reset Values
++    The default beacon interval is 100 TUs (102.4 ms)
++
++Restrictions
++    This command can only be issued before the AR6000 device starts an ad hoc network
++
++See Also
++    “SET_IBSS_PM_CAPS”
++
++=====================================================================
++
++
++Name
++    SET_BIT_RATE
++
++Synopsis
++    The host uses this command to set the AR6000 device to a specific fixed rate.
++
++Command
++    wmiconfig eth1 --setfixrates <rate_0> ... <rate_n>
++
++Command Parameters
++    INT8    rateIndex
++    A WMI_BIT_RATE value
++    {
++        RATE_AUTO    = -1
++        RATE_1Mb     = 0
++        RATE_2Mb     = 1
++        RATE_5_5M    = 2
++        RATE_11Mb    = 3
++        RATE_6Mb     = 4
++        RATE_9Mb     = 5
++        RATE_12Mb    = 6
++        RATE_18Mb    = 7
++        RATE_24Mb    = 8
++        RATE_36Mb    = 9
++        RATE_48Mb    = 10
++        RATE_54Mb    = 11
++      } WMI_BIT_RATE
++
++
++Command Values
++    See command parameters
++
++Reset Values
++    The dynamic rate is determined by the AR6000 device
++
++Restrictions
++    This command is intended for use only during development/debug; it is not
++intended for use in production
++
++See Also
++    “GET_BIT_RATE”
++
++=====================================================================
++
++
++Name
++    SET_BMISS_TIME
++
++Synopsis
++    This command sets the beacon miss (BMISS) time, which the AR6000 hardware use
++    to recognize missed beacons. When an excessive number (15) of consecutive beacons
++    are missed, the AR6000 consider switching to a different BSS. The time can be
++    specified in number of beacons or in TUs.
++
++Command(s)
++    wmiconfig eth1 --setbmissbeacons=<val>
++    wmiconfig eth1 --setbmisstime=<val>
++
++Command Parameters
++    UINT16    bmissTime    Specifies the beacon miss time
++                            [1000...5000] in TUs (1024 ms)
++    UINT16    bmissbeacons  Specifies the number of beacons [5...50]
++
++Command Values
++    None
++
++Reset Values
++    bmissTime is 1500 TUs (1536 ms)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BSS_FILTER
++
++Synopsis
++    The host uses this to inform the AR6000 device of the types of networks about which
++    it wants to receive information from the “BSSINFO” event. As the device performs
++    either foreground or background scans, it applies the filter and sends “BSSINFO”
++    events only for the networks that pass the filter. If any of the  bssFilter or the ieMask
++    filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match
++    for the IEs in the beacons, probe reponses and channel switch action management
++    frame. See also “Scan and Roam” on page C-1.
++
++    The BSS filter command has been enhanced to support IE based filtering. The IEs can
++    be specified as a bitmask through this command using this enum.
++
++Command
++    wmiconfig eth1 –filter = <filter> --ieMask 0x<mask>
++
++Command Parameters
++    UINT8    BssFilter
++
++ Command Values
++    typedef struct {
++        A_UINT8    bssFilter;    See WMI_BSS_FILTER
++        A_UINT32    ieMask;
++    } __ATTRIB_PACK WMI_BSS_FILTER_CMD;
++
++    The ieMask can take this combination of values:
++
++    enum {
++        BSS_ELEMID_CHANSWITCH   = 0x01
++        BSS_ELEMID_ATHEROS      = 0x02,
++    }
++
++Reply Value
++    None
++
++Reset Value
++    BssFilter = NONE_BSS_FILTER (0)
++
++Restrictions
++    None
++
++See Also
++    “CONNECT_CMD”
++
++=====================================================================
++
++
++Name
++    SET_BT_PARAMS
++
++Synopsis
++    This command is used to set the status of a Bluetooth stream or set Bluetooth
++    coexistence register parameters. The stream may be an SCO or an A2DP stream and
++    its status can be started/stopped/suspended/resumed.
++
++Command
++    wmiconfig –setBTparams <paramType> <params>
++
++Command Parameters
++    struct {
++       union {
++            BT_PARAMS_SCO    scoParams;
++            BT_PARAMS_A2DP   a2dpParams;
++            BT_PARAMS_MISC   miscParams;
++            BT_COEX_REGS     regs;
++        } info;
++         A_UINT8 paramType;
++        struct {
++            A_UINT8 noSCOPkts;    Number of SCO packets between consecutive PS-POLLs
++            A_UINT8 pspollTimeout;
++            A_UINT8 stompbt;
++        } BT_PARAMS_SCO;
++        struct {
++            A2DP BT stream parameters
++            A_UINT32   period;
++            A_UINT32   dutycycle;
++            A_UINT8    stompbt;
++        } BT_PARAMS_A2DP;
++        struct {
++            union {
++               WLAN_PROTECT_POLICY_TYPE   protectParams;
++               A_UINT16    wlanCtrlFlags;
++            }info;
++        A_UINT8 paramType;
++        } BT_PARAMS_MISC;
++        struct {
++            BT coexistence registers values
++            A_UINT32    mode;     Coexistence mode
++            A_UINT32    scoWghts; WLAN and BT weights
++            A_UINT32    a2dpWghts;
++            A_UINT32    genWghts;
++            A_UINT32    mode2;    Coexistence mode2
++            A_UINT8    setVal;
++        } BT_COEX_REGS;
++
++Command Values
++    None defined
++
++Reset Value
++    None
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BT_STATUS
++
++Synopsis
++    Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream
++    and its status can be started/stopped/suspended/resumed.
++
++Command
++    wmiconfig –setBTstatus <streamType> <status>
++
++Command Parameters
++    {
++        A_UINT8        streamType;    Stream type
++        A_UINT8        status;    Stream status
++    }WMI_SET_BT_STATUS_CMD;
++
++Command Values
++    {
++        BT_STREAM_UNDEF    = 0
++        BT_STREAM_SCO
++        SCO stream
++        BT_STREAM_A2DP
++        A2DP stream
++        BT_STREAM_MAX
++    } BT_STREAM_TYPE;
++
++    {
++        BT_STATUS_UNDEF    = 0
++        BT_STATUS_START
++        BT_STATUS_STOP
++        BT_STATUS_RESUME
++        BT_STATUS_SUSPEND
++        BT_STATUS_MAX
++    } BT_STREAM_STATUS;
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_CHANNEL_PARAMETERS
++
++Synopsis
++    Configures various WLAN parameters related to channels, sets the wireless mode,
++    and can restrict the AR6000 device to a subset of available channels. The list of
++    available channels varies depending on the wireless mode and the regulatory
++    domain. The device never operates on a channel outside of its regulatory domain. The
++    device starts to scan the list of channels right after this command.
++
++Command
++    wmiconfig eth1 --wmode <mode> <list>
++
++Command Parameters
++    UINT8    phyMode    See Values below.
++    UINT8    numberOfChannels
++        Number of channels in the channel array that
++        follows. If = 0, then the device uses all of the
++        channels permitted by the regulatory domain
++        and by the specified phyMode.
++    UINT16    channel[numberOfChannels]
++        Array listing the subset of channels (expressed
++        as frequencies in MHz) the host wants the
++        device to use. Any channel not permitted by
++        the specified phyMode or by the specified
++        regulatory domain is ignored by the device.
++
++Command Values
++    phyMode = {
++        Wireless mode
++        11a    = 0x01
++        11g    = 0x02
++        11ag   = 0x03
++        11b    = 0x04
++        11g only    = 0x05
++        }
++
++Reset Values
++    phyMode
++    11ag
++    802.11a/g modules
++        11g
++    802.11g module
++    channels
++        Defaults to all channels permitted by the
++        current regulatory domain.
++
++Restrictions
++    This command, if issued, should be issued soon after reset and prior to the first
++    connection. This command should only be issued in the DISCONNECTED state.
++
++=====================================================================
++
++
++Name
++    SET_DISC_TIMEOUT
++
++Synopsis
++    The host uses this command to configure the amount of time that the AR6000 should
++    spend when it attempts to reestablish a connection after losing link with its current
++    BSS. If this time limit is exceeded, the AR6000 send a “DISCONNECT” event. After
++    sending the “DISCONNECT” event the AR6000 continues to attempt to reestablish a
++    connection, but they do so at the interval corresponding to a foreground scan as
++    established by the “SET_SCAN_PARAMS” command.
++
++    A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming,
++    so that the AR6000 will not perform any scans after sending a “DISCONNECT”
++    event to the host. The state is maintained until a shutdown or host sets different
++    timeout value from 0.
++
++Command
++    wmiconfig eth1 --disc=<timeout in seconds>
++
++Command Parameters
++    UINT8    disconnectTimeout
++        Specifies the time limit (in seconds) after
++        which a failure to reestablish a connection
++        results in a “DISCONNECT” event
++
++Command Values
++    None
++
++Reset Values
++    disconnectTimeout is 10 seconds
++
++Restrictions
++    This command can only be issued while in a DISCONNECTED state
++
++=====================================================================
++
++
++Name
++    SET_FIXRATES
++
++Synopsis
++    By default, the AR6000 device uses all PHY rates based on mode of operation. If the
++    host application requires the device to use subset of supported rates, it can set those
++    rates with this command. In 802.11g mode, the AR6000 device takes the entire
++    802.11g basic rate set and the rates specified with this command and uses it as the
++    supported rate set.
++
++    This rate set is advertised in the probe request and the assoc/re-assoc request as
++    supported rates. Upon successful association, the device modifies the rate set pool
++    using the: intersection of AP-supported rates with the union of the 802.11g basic rate
++    set and rates set using this command. The device picks transmission rates from this
++    pool based on a rate control algorithm.
++
++Command
++    TBD
++
++Command Parameters
++    A_UINT16    fixRateMask;
++        The individual bit is an index for rate table,
++        and setting the that index to 1 would set that
++        corresponding rate. E.g., fixRateMask = 9
++        (1001) sets 1 Mbps and 11 Mbps.
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    “GET_FIXRATES”
++
++=====================================================================
++
++
++Name
++    SET_WHAL_PARAM
++
++Synopsis
++    An internal AR6000 command that is used to set certain hardware parameters. The
++    description of this command is in $WORKAREA/include/halapi.h.
++
++Command
++    TBD
++
++Command Parameters
++    ATH_HAL_SETCABTO_CMDID
++        Sets the timeout waiting for the multicast
++        traffic after a DTIM beacon (in TUs).
++
++Command Values
++    None
++
++Reset Value
++    Default = 10 TUs
++
++Restrictions
++    This command should be executed before issuing a connect command.
++
++=====================================================================
++
++
++Name
++    SET_HOST_SLEEP_MODE
++
++Synopsis
++    The host uses this command to set the host mode to asleep or awake. All packets are
++    delivered to the host when the host mode is awake. When host mode is asleep, only if
++    WoW is enabled and the incoming packet matches one of the specified WoW
++    patterns, will the packet be delivered to the host. The host will also be woken up by
++    the target for pattern-matching packets and important events.
++
++Command
++    wmiconfig –sethostmode=<asleep/awake>
++
++Command Parameters
++    A_BOOL    awake    Set the host mode to awake
++    A_BOOL    asleep   Set the host mode to asleep
++
++Command Values
++    1 = awake, 0 = asleep
++
++Reset Value
++    None defined (default host mode is awake)
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_IBSS_PM_CAPS
++
++Synopsis
++    Used to support a non-standard power management scheme for an ad hoc wireless
++    network consisting of up to eight stations (STAs) that support this form of power
++    saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc
++    networks is required to use this command effectively.
++
++Command
++    wmiconfig eth1 --ibsspmcaps --ps=<enable/disable>
++        --aw=<ATIM Windows in ms>
++        --ttl=<Time to live in number of beacon periods>
++        --to=<timeout in ms>
++
++Command Parameters
++    UINT8    power_saving
++        = 0
++        The non-standard power saving scheme is
++        disabled and maximum throughput (with no
++        power saving) is obtained.
++
++        = 1
++        Ad hoc power saving scheme is enabled (but
++        throughput may be decreased)
++
++    UINT16    atim_windows
++        Specifies the length (in ms) of the ad hoc traffic
++        indication message (ATIM) windows used in an ad
++        hoc network. All Atheros-based STAs that join the
++        network use this duration ATIM window.
++
++    The duration is communicated between wireless
++    STAs through an IE in beacons and probe responses.
++
++    The host sets atim_windows to control trade-offs
++    between power use and throughput. The value
++    chosen should be based on the beacon interval (see
++    the “SET_BEACON_INT” command) on the
++    expected number of STAs in the IBSS, and on the
++    amount of traffic and traffic patterns between STAs.
++
++    UINT16    timeout_value
++        Specifies the timeout (in ms). The value is the same
++        for all ad hoc connections, but tracks separately for
++        each.
++
++        Applicable only for a beacon period and used to
++        derive actual timeout values on the Tx and Rx sides.
++        On the Tx side, the value defines a window during
++        which the STA accepts the frame(s) from the host for a
++        particular connection. Until closed, the window
++        restarts with every frame received from the host. On
++        the Rx side, indicates the time until which the STA
++        continues accepting frames from a particular
++        connection. The value resets with every frame
++        received. The value can be used to determine the
++        trade off between throughput and power.
++        Default = 10 ms
++
++    UINT8    ttl
++        Specifies the value in number of beacon periods. The
++        value is used to set a limit on the time until which a
++        frame is kept alive in the AR6001 before being
++        discarded. Default = 5
++
++Command Values
++    None
++
++Reset Values
++    By default, power_saving is enabled with atim_window = 20 ms
++
++Restrictions
++    Can only be issued before the AR6000 starts an ad hoc network
++
++See Also
++    “SET_BEACON_INT”
++
++=====================================================================
++
++
++
++Name
++    SET_LISTEN_INT
++
++Synopsis
++    The host uses this command to request a listen interval, which determines how often
++    the AR6000 device should wake up and listen for traffic. The listen interval can be set
++    by the TUs or by the number of beacons. The device may not be able to comply with
++    the request (e.g., if the beacon interval is greater than the requested listen interval, the
++    device sets the listen interval to the beacon interval). The actual listen interval used
++    by the device is available in the “CONNECT” event.
++
++Command
++    wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000>
++
++    --listenbeacons=<#of beacons, can range from 1 to 50>
++
++Command Parameters
++    UINT16    listenInterval
++        Specifies the listen interval in Kms
++        (1024 ms), ranging from 100 to 1000
++
++    UINT16    listenbeacons
++        Specifies the listen interval in beacons,
++        ranging from 1 to 50
++
++Command Values
++    None
++
++Reset Values
++    The device sets the listen interval equal to the beacon interval of the AP it associates
++    to.
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_LPREAMBLE
++
++Synopsis
++    Overrides the short preamble capability of the AR6000 device
++
++Command
++    TBD
++
++Command Parameters
++    WMI_LPREAMBLE_DISABLED
++        The device is short-preamble capable
++
++    WMI_LPREAMBLE_ENABLED
++        The device supports only the long-
++    preamble mode
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_MAX_SP_LEN
++
++Synopsis
++    Set the maximum service period; indicates the number of packets the AR6001 can
++    receive from the AP when triggered
++
++Command
++    wmiconfig eth1 --setMaxSPLength <maxSPLen>
++
++Command Parameters
++    UINT8    maxSPLen
++        An APSD_SP_LEN_TYPE value
++
++Command Values
++    {
++        DELIVER_ALL_PKT  = 0x0
++        DELIVER_2_PKT    = 0x1
++        DELIVER_4_PKT    = 0x2
++        DELIVER_6_PKT    = 0x3
++    }APSD_SP_LEN_TYPE
++
++
++Reset Values
++    maxSPLen is DELIVER_ALL_PKT
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_OPT_MODE
++
++Synopsis
++    Special feature, sets the special mode on/off
++
++Command
++    wmiconfig eth1 --mode <mode>
++    Set the optional mode, where mode is special or off
++
++Command Parameters
++    enum {
++        SPECIAL_OFF
++        SPECIAL_ON
++    } OPT_MODE_TYPE;
++
++Command Values
++
++Reset Value
++    Mode = Off
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_PMKID
++
++Synopsis
++    The host uses this command to enable or disable a pairwise master key ID (PMKID)
++    in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a
++    DISCONNECT command from the host. Individual entries in the cache might be
++    deleted as the AR6000 detect new APs and decides to remove old ones.
++
++Command
++    wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff>
++    --bsspmkid=<pmkid>
++
++Command Parameters
++    UINT8    bssid[6]
++        The MAC address of the AP that the
++        PMKID corresponds to (6 bytes in hex
++        format)
++
++    UINT8    enable
++        Either PMKID_DISABLE (0) to disable
++        the PMKID or PMKID_ENABLE (1) to
++        enable it (16 bytes in hex format)
++
++    UINT8    pmkid[16]
++        Meaningful only if enable is
++        PMKID_ENABLE, when it is the PMKID
++        that the AR6000 should use on the next
++        reassociation with the specified AP
++
++Command Values
++    enable
++    = 0 (disable), 1 (enable)
++    PKMID enabled/disabled
++
++Reset Values
++    None defined
++
++Restrictions
++    Only supported in infrastructure networks
++
++=====================================================================
++
++
++Name
++    SET_PMKID_LIST_CMD
++
++Synopsis
++    Configures the list of PMKIDs on the firmware.
++
++Command
++    wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1>
++    ... --pmkid=<pmkid_n>
++
++    Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16
++    bytes in hex format)
++
++Command Parameters
++    {
++        A_UINT8 pmkid[WMI_PMKID_LEN];
++    } __ATTRIB_PACK WMI_PMKID;
++
++    {
++        A_UINT32 numPMKID;
++        WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
++    } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD;
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    Supported only in infrastructure modes
++
++=====================================================================
++
++
++Name
++    SET_POWER_MODE
++
++Synopsis
++    The host uses this command to provide the AR6000 device with guidelines on the
++    desired trade-off between power utilization and performance.
++
++        In normal power mode, the device enters a sleep state if they have nothing to do,
++        which conserves power but may cost performance as it can take up to 2 ms to
++        resume operation after leaving sleep state.
++
++        In maximum performance mode, the device never enters sleep state, thus no time
++        is spent waking up, resulting in higher power consumption and better
++        performance.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8    powerMode
++        WMI_POWER_MODE value
++    {
++        REC_POWER   = 1
++            (Recommended setting) Tries to conserve
++            power without sacrificing performance
++        MAX_PERF_POWER    = 2
++            Setting that maximizes performance at
++            the expense of power
++
++            All other values are reserved
++    } WMI_POWER_MODE
++
++Command Values
++    See command parameters
++
++Reset Values
++    powerMode is REC_POWER
++
++Restrictions
++    This command should only be issued in the DISCONNECTED state for the
++    infrastructure network.
++
++            For a PM-disabled ad hoc network, the power mode should remain in
++            MAX_PERF_POWER.
++
++            For a PM-enabled ad hoc network, the device can have REC_POWER or
++            MAX_PERF_POWER set, but either way it must follow the power save ad hoc
++            protocol. The host can change power modes in the CONNECTED state.
++
++    Host changes to the PS setting when the STA is off the home channel take no effect
++    and cause a TARGET_PM_FAIL event.
++
++=====================================================================
++
++
++Name
++    SET_POWER_PARAMS
++
++Synopsis
++    The host uses this command to configure power parameters
++
++Command
++    wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL>
++    --dp=<DTIM policy: ignore/normal/stick>
++
++Command Parameters
++    UINT16    idle_period
++        Length of time (in ms) the AR6000 device
++        remains awake after frame Rx/Tx before going
++        to SLEEP state
++
++    UINT16    pspoll_number
++            The number of PowerSavePoll (PS-poll)
++            messages the device should send before
++            notifying the AP it is awake
++
++    UINT16    dtim_policy
++            A WMI_POWER_PARAMS_CMD value
++
++    {
++        IGNORE_DTIM    =1
++            The device does not listen to any content after
++            beacon (CAB) traffic
++        NORMAL_DTIM    = 2
++            DTIM period follows the listen interval (e.g., if
++            the listen interval is 4 and the DTIM period is 2,
++            the device wakes up every fourth beacon)
++        STICK_DTIM    = 3
++            Device attempt to receive all CAB traffic (e.g., if
++            the DTIM period is 2 and the listen interval is 4,
++            the device wakes up every second beacon)
++    } WMI_POWER_PARAMS_CMD
++
++Command Parameters
++    See command parameters
++
++Reset Values
++    idle_period
++        200 ms
++
++    pspoll_number
++    = 1
++
++    dtim_policy
++    = NORMAL_DTIM
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_POWERSAVE_PARAMS
++
++Synopsis
++    Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and
++    the two ASPD TIM policies
++
++Command
++    wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms>
++    --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/
++    adhere> --simulatedAPSDTimPolicy=<ignore/adhere>
++
++Command Parameters
++    typedef struct {
++        A_UINT16    psPollTimeout;
++            Timeout (in ms) after sending PS-POLL; the
++            AR6000 device sleeps if it does not receive a
++            data packet from the AP
++
++        A_UINT16    triggerTimeout;
++            Timeout (in ms) after sending a trigger; the
++            device sleeps if it does not receive any data
++            or null frame from the AP
++
++        APSD_TIM_POLICY    apsdTimPolicy;
++            TIM behavior with queue APSD enabled
++
++        APSD_TIM_POLICY    simulatedAPSD
++
++        TimPolicy;
++            TIM behavior with simulated APSD
++            enabled
++
++    typedef enum {
++        IGNORE_TIM_ALL_QUEUES_APSD = 0,
++        PROCESS_TIM_ALL_QUEUES_APSD = 1,
++        IGNORE_TIM_SIMULATED_APSD = 2,
++        POWERSAVE_TIMERS_POLICY = 3,
++    } APSD_TIM_POLICY;
++
++Command Values
++    None
++
++Reset Values
++    psPollTimeout is 50 ms; triggerTimeout is 10 ms;
++    apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD;
++    simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY
++
++Restrictions
++    When this command is used, all parameters must be set; this command does not
++    allow setting only one parameter.
++
++=====================================================================
++
++
++Name
++    SET_PROBED_SSID
++
++Synopsis
++    The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX
++    (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID
++    table. By default, the device actively looks for only the SSID specified in the
++    “CONNECT_CMD” command, and only when the regulatory domain allows active
++    probing. With this command, specified SSIDs are probed for, even if they are hidden.
++
++Command
++    wmiconfig eth1 --ssid=<ssid> [--num=<index>]
++
++Command Parameters
++    {
++        A_UINT8    numSsids
++            A number from 0 to
++            MAX_PROBED_SSID_INDEX indicating
++            the active SSID table entry index for this
++            command (if the specified entry index
++            already has an SSID, the SSID specified in
++            this command replaces it)
++
++        WMI_PROBED_SSID_INFO    probedSSID[1]
++    } WMI_PROBED_SSID_CMD
++
++    {
++        A_UINT8    flag
++            WMI_SSID_FLAG indicates the current
++            entry in the active SSID table
++        A_UINT8    ssidLength
++            Length of the specified SSID in bytes.
++            If = 0, the entry corresponding to the
++            index is erased
++        A_UINT8    ssid[32]
++            SSID string actively probed for when
++            permitted by the regulatory domain
++    } WMI_PROBED_SSID_INFO
++
++Command Values
++    WMI_SSID_FLAG
++    {
++         DISABLE_SSID_FLAG    = 0
++            Disables entry
++        SPECIFIC_SSID_FLAG    = 1
++            Probes specified SSID
++        ANY_SSID_FLAG    = 2
++            Probes for any SSID
++    } WMI_SSID_FLAG
++
++Reset Value
++    The entries are unused.
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_REASSOC_MODE
++
++Synopsis
++    Specify whether the disassociated frame should be sent or not upon reassociation.
++
++Command
++    wmiconfig eth1 --setreassocmode <mode>
++
++Command Parameters
++    UINT8    mode
++
++Command Values
++    mode
++        = 0x00
++        Send disassoc to a previously connected AP
++        upon reassociation
++        = 0x01
++        Do not send disassoc to previously connected
++        AP upon reassociation
++
++Reset Values
++    None defined
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_RETRY_LIMITS
++
++Synopsis
++    Allows the host to influence the number of times that the AR6000 device should
++    attempt to send a frame before they give up.
++
++Command
++    wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries>
++    <enableNotify>
++
++Command Parameters
++    {
++        UINT8    frameType
++            A WMI_FRAMETYPE specifying
++            which type of frame is of interest.
++        UINT8    trafficClass
++            Specifies a traffic class (see
++            “CREATE_PSTREAM”). This
++            parameter is only significant when
++            frameType = DATA_FRAMETYPE.
++        UINT8    maxRetries
++            Maximum number of times the
++            device attempts to retry a frame Tx,
++            ranging from WMI_MIN_RETRIES
++            (2) to WMI_MAX_RETRIES (15). If
++            the special value 0 is used,
++            maxRetries is set to 15.
++        A_UINT8    enableNotify
++            Notify when enabled
++    } WMI_RETRY_LIMIT_INFO
++
++    {
++        A_UINT8    numEntries
++        WMI_RETRY_LIMIT_INFO  retryLimitInfo[1]
++    } WMI_SET_RETRY_LIMITS_CMD
++
++Command Values
++    {
++        MGMT_FRAMETYPE    = 0    Management frame
++        CONTROL_FRAMETYPE = 1    Control frame
++        DATA_FRAMETYPE    = 2    Data frame
++    } WMI_FRAMETYPE
++
++Reset Values
++    Retries are set to 15
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_ROAM_CTRL
++
++Synopsis
++    Affects how the AR6000 device selects a BSS. The host uses this command to set and
++    enable low RSSI scan parameters. The time period of low RSSI background scan is
++    mentioned in scan period. Low RSSI scan is triggered when the current RSSI
++    threshold (75% of current RSSI) is equal to or less than scan threshold.
++
++    Low RSSI roam is triggered when the current RSSI threshold falls below the roam
++    threshold and roams to a better AP by the end of the scan cycle. During Low RSSI
++    roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during
++    scan, it roams immediately to it instead of waiting for the end of the scan cycle. See
++    also “Scan and Roam” on page C-1.
++
++Command
++    wmiconfig --roam <roamctrl> <info>, where info is <scan period>
++    <scan threshold> <roam threshold> <roam rssi floor>
++
++Command Parameters
++    A_UINT8    roamCtrlType;
++
++Command Values
++    WMI_FORCE_ROAM     = 1
++    Roam to the specified BSSID
++
++    WMI_SET_ROAM_MODE  = 2
++    Default, progd bias, no roam
++
++    WMI_SET_HOST_BIAS  = 3
++    Set the host bias
++
++    WMI_SET_LOWRSSI_SCAN_PARAMS  = 4
++    Info parameters
++
++    A_UINT8    bssid[ATH_MAC_LEN];
++    WMI_FORCE_ROAM
++
++    A_UINT8    roamMode;
++    WMI_SET_ROAM_MODE
++
++    A_UINT8    bssBiasInfo;
++    WMI_SET_HOST_BIAS
++
++    A_UINT16    lowrssi_scan_period;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_INT16
++    lowrssi_scan_threshold;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_INT16    lowrssi_roam_threshold;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_UINT8    roam_rssi_floor;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++Reset Value
++    None defined (default lowrssi scan is disabled. Enabled only when scan period is set.)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_RTS
++
++Synopsis
++    Decides when RTS should be sent.
++
++Command
++    wmiconfig eth1 --setRTS <pkt length threshold>
++
++Command Parameters
++    A_UINT16
++    threshold;
++    Command parameter threshold in bytes. An RTS is
++    sent if the data length is more than this threshold.
++    The default is to NOT send RTS.
++
++Command Values
++    None
++
++Reset Value
++    Not to send RTS.
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_SCAN_PARAMS
++
++Synopsis
++    The host uses this command to set the AR6000 scan parameters, including the duty
++    cycle for both foreground and background scanning. Foreground scanning takes
++    place when the AR6000 device is not connected, and discovers all available wireless
++    networks to find the best BSS to join. Background scanning takes place when the
++    device is already connected to a network and scans for potential roaming candidates
++    and maintains them in order of best to worst. A second priority of background
++    scanning is to find new wireless networks.
++
++    The device initiates a scan when necessary. For example, a foreground scan is always
++    started on receipt of a “CONNECT_CMD” command or when the device cannot find
++    a BSS to connect to. Foreground scanning is disabled by default until receipt of a
++    CONNECT command. Background scanning is enabled by default and occurs every
++    60 seconds after the device is connected.
++
++    The device implements a binary backoff interval for foreground scanning when it
++    enters the DISCONNECTED state after losing connectivity with an AP or when a
++    CONNECT command is received. The first interval is ForegroundScanStartPeriod,
++    which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
++    If the host terminates a connection with DISCONNECT, the foreground scan period
++    is ForegroundScanEndPeriod. All scan intervals are measured from the time a full
++    scan ends to the time the next full scan starts. The host starts a scan by issuing a
++    “START_SCAN” command. See also “Scan and Roam” on page C-1.
++
++Command
++    wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> --
++    act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags
++    <connScan> <scanConnected> <activeScan> <reportBSSINFO>
++
++Command Parameters
++    UINT16    fgStartPeriod
++        First interval used by the device when it
++        disconnects from an AP or receives a
++        CONNECT command, specified in seconds (0–
++        65535). If = 0, the device uses the reset value.
++        If = 65535, the device disables foreground
++        scanning.
++
++    UINT16    fgEndPeriod
++        The maximum interval the device waits between
++        foreground scans specified in seconds (from
++        ForegroundScanStartPeriod to 65535). If = 0, the
++        device uses the reset value.
++
++    UINT16    bgScanPeriod
++        The period of background scan specified in
++        seconds (0–65535). By default, it is set to the reset
++        value of 60 seconds. If 0 or 65535 is specified, the
++        device disables background scanning.
++
++    UINT16    maxactChDwellTime
++        The period of time the device stays on a
++        particular channel while active scanning. It is
++        specified in ms (10–65535). If the special value of
++        0 is specified, the device uses the reset value.
++
++    UINT16    PasChDwellTime
++        The period of time the device remains on a
++        particular channel while passive scanning. It is
++        specified in ms (10–65535). If the special value of
++        0 is specified, the device uses the reset value.
++
++    UINT8    shortScanRatio
++        Number of short scans to perform for each
++        long scan.
++
++    UINT8    scanCtrlFlasgs
++
++    UINT16    minactChDwellTime
++        Specified in ms
++
++    UINT32    maxDFSchActTime
++        The maximum time a DFS channel can stay
++        active before being marked passive, specified in
++        ms.
++
++Command Values
++    None
++
++Reset Values
++    ForegroundScanStart
++Period
++        1 sec
++
++    ForegroundScanEndPeriod
++        60 sec
++
++    BackgroundScanPeriod
++        60 sec
++
++    ActiveChannelDwellTime
++        105 ms
++
++=====================================================================
++
++
++Name
++    SET_TKIP_COUNTERMEASURES
++
++Synopsis
++    The host issues this command to tell the target whether to enable or disable TKIP
++    countermeasures.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8    WMI_TKIP_CM_ENABLE
++        Enables the countermeasures
++
++
++    UINT8    TKIP_CM_DISABLE
++        Disables the countermeasures
++
++Command Values
++    None
++
++Reset Values
++    By default, TKIP MIC reporting is disabled
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_TX_PWR
++
++Synopsis
++    The host uses this command to specify the Tx power level of the AR6000. Cannot be
++    used to exceed the power limit permitted by the regulatory domain. The maximum
++    output power is limited in the chip to 31.5 dBm; the range is 0 – 31.5 dbm.
++
++Command
++    wmiconfig --power <dbM>
++
++Command Parameters
++    UINT8    dbM
++        The desired Tx power specified in dbM.
++        If = 0, the device chooses the maximum
++        permitted by the regulatory domain.
++
++Command Values
++    None
++
++Reset Values
++    The maximum permitted by the regulatory domain
++
++Restrictions
++    None
++
++See Also
++    “GET_TX_PWR”
++
++
++=====================================================================
++
++Name
++    SET_VOICE_PKT_SIZE
++
++Synopsis
++    If an AP does not support WMM, it has no way to differentiate voice from data.
++    Because the voice packet is typically small, packet in size less than voicePktSize are
++    assumed to be voice, otherwise it is treated as data.
++
++Command
++    wmiconfig eth1 --setVoicePktSize <size-in-bytes>
++
++Command Parameters
++    UINT16    voicePktSize
++        Packet size in octets
++
++Command Values
++    None
++
++Reset Values
++    voicePktSize default is 400 bytes
++
++Restrictions
++    No effect if WMM is unavailable
++
++
++=====================================================================
++
++Name
++    SET_WMM
++
++Synopsis
++    Overrides the AR6000 device WMM capability
++
++Command
++    wmiconfig eth1 --setwmm <enable>
++
++Command Parameters
++    WMI_WMM_ENABLED
++        Enables WMM
++
++    WMI_WMM_DISABLED
++        Disables WMM support
++
++Command Values
++    0 = disabled
++    1 = enabled
++
++Reset Value
++    WMM Disabled
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_WMM_TXOP
++
++Synopsis
++    Configures TxOP Bursting when sending traffic to a WMM capable AP
++
++Command
++    wmiconfig eth1 --txopbursting <burstEnable>
++
++    <burstEnable>
++        = 0
++    Disallow TxOp bursting
++
++        = 1
++    Allow TxOp bursting
++
++Command Parameters
++    txopEnable
++        = WMI_TXOP_DISABLED
++        Disabled
++
++        = WMI_TXOP_ENABLED
++        Enabled
++
++Command Values
++    txopEnable
++        = 0    Disabled
++
++        = 1    Enabled
++
++Reset Value
++    Bursting is off by default
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_WOW_MODE
++
++Synopsis
++    The host uses this command to enable or disable the WoW mode. When WoW mode
++    is enabled and the host is asleep, pattern matching takes place at the target level.
++    Only packets that match any of the pre-specified WoW filter patterns, will be passed
++    up to the host. The host will also be woken up by the target. Packets which do not
++    match any of the WoW patterns are discarded.
++
++Command
++    wmiconfig –setwowmode <enable/disable>
++
++Command Parameters
++    A_BOOL    enable_wow
++        Enable or disable WoW:
++
++Command Values
++        = 0
++    Disable WoW
++
++        = 1
++    Enable WoW
++
++Reset Value
++    None defined (default WoW mode is disabled).
++
++Restrictions
++    None
++
++See Also
++    “GET_WOW_LIST”
++
++
++=====================================================================
++
++Name
++    SET_WSC_STATUS
++
++Synopsis
++    The supplicant uses this command to inform the target about the status of the WSC
++    registration protocol. During the WSC registration protocol, a flag is set so the target
++    bypasses some of the checks in the CSERV module. At the end of the registration, this
++    flag is reset.
++
++Command
++    N/A
++
++Command Parameters
++    A_BOOL status
++        = 1    WSC registration in progress
++        = 0    WSC protocol not running
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined (default = 0)
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SNR_THRESHOLD_PARAMS
++
++Synopsis
++    Configures how the AR6000 device monitors and reports SNR of the connected BSS,
++    used as a link quality metric.
++
++Command
++    --snrThreshold <weight> <upper_threshold_1> ...
++    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
++    <pollTimer>
++
++Command Parameters
++    <weight>
++        Share with rssiThreshold. Range in [1, 16], used
++        in the formula to calculate average RSSI
++
++    <upper_threshold_x>
++        Above thresholds expressed in db, in ascending
++        order
++
++    <lower_threshold_x>
++        Below thresholds expressed in db, in ascending
++        order
++
++    <pollTimer>
++        The signal strength sampling frequency in
++        seconds. If polltime = 0, signal strength
++        sampling is disabled
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    START_SCAN
++
++Synopsis
++    The host uses this command to start a long or short channel scan. All future scans are
++    relative to the time the AR6000 device processes this command. The device performs
++    a channel scan on receipt of this command, even if a scan was already in progress.
++    The host uses this command when it wishes to refresh its cached database of wireless
++    networks. The isLegacy field will be removed (0 for now) because it is achieved by
++    setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also
++    “Scan and Roam”
++
++Command
++    wmiconfig eth1 --startscan <scan type> <forcefgscan> 0
++    <homeDwellTime> <forceScanInterval>
++
++Command Parameters
++    UINT8    scanType
++        WMI_SCAN_TYPE
++
++Command Values
++    {
++        WMI_LONG_SCAN    =0x0
++            Requests a full scan
++        WMI_SHORT_SCAN   =0x1
++            Requests a short scan
++    } WMI_SCAN_TYPE
++
++    A_BOOL    forceFgScan
++        forceFgScan
++        = 0
++        Disable the foreground scan
++
++        forceFgScan
++        = 1
++        Forces a foreground scan
++
++    A_UINT32    homeDwellTime
++        Maximum duration in the home
++        channel (in ms)
++
++    A_UINT32     forceScanInterval
++        Time interval between scans (in ms)
++
++    A_UINT32     scanType
++        WMI_SCAN_TYPE
++
++Reset Value
++    Disable forcing foreground scan
++
++Restrictions
++    isLegacy field will no longer be supported (pass as 0 for now)
++
++
++=====================================================================
++
++Name
++    SYNCHRONIZE
++
++Synopsis
++    The host uses this command to force a synchronization point between the command
++    and data paths
++
++Command
++    TBD
++
++Command Parameters
++    None
++
++
++
++Command Values
++    None
++
++
++
++Reset Values
++    None
++
++
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    TARGET_ERROR_REPORT_BITMASK
++
++Synopsis
++    Allows the host to control “ERROR_REPORT” events from the AR6000 device.
++
++        If error reporting is disabled for an error type, a count of errors of that type is
++        maintained by the device.
++
++        If error reporting is enabled for an error type, an “ERROR_REPORT” event is
++        sent when an error occurs and the error report bit is cleared.
++
++    Error counts for each error type are available through the “GET_TARGET_STATS”
++    command.
++
++Command
++    wmiconfig eth1 --setErrorReportingBitmask
++
++Command Parameters
++    UINT32    bitmask
++        Represents the set of
++        WMI_TARGET_ERROR_VAL error types
++        enabled for reporting
++
++Command Values
++    {
++        WMI_TARGET_PM_ERR_FAIL    = 0x00000001
++            Power save fails (only two cases):
++               Retry out of null function/QoS null
++               function to associated AP for PS
++               indication'
++               Host changes the PS setting when
++               STA is off home channel
++
++        WMI_TARGET_KEY_NOT_FOUND    = 0x00000002
++            No cipher key
++        WMI_TARGET_DECRYPTION_ERR   = 0x00000004
++            Decryption error
++        WMI_TARGET_BMISS            = 0x00000008
++            Beacon miss
++        WMI_PSDISABLE_NODE_JOIN     = 0x00000010
++            A non-PS-enabled STA joined the
++            PS-enabled network
++        WMI_TARGET_COM_ERR          = 0x00000020
++            Host/target communication error
++        WMI_TARGET_FATAL_ERR        = 0x00000040
++            Fatal error
++    } WMI_TARGET_ERROR_VAL
++
++Reset Values
++    Bitmask is 0, and all error reporting is disabled
++
++Restrictions
++    None
++
++
++=====================================================================
++WMI Events
++
++Event
++    Description
++    Page
++
++
++BSSINFO
++    Contains information describing BSSs collected during a scan
++
++CAC_EVENTID
++    Indicates signalling events in admission control
++
++CMDERROR
++    The AR6000 device encounters an error while attempting to process
++    a command
++
++CONNECT
++    The device has connected to a wireless network
++
++DISCONNECT
++    The device lost connectivity with a wireless network
++
++ERROR_REPORT
++    An error has occurred for which the host previously requested
++    notification with the command
++    “TARGET_ERROR_REPORT_BITMASK”
++
++EXTENSION
++    WMI extension event
++
++GET_PMKID_LIST_EVENT
++    Created in response to a “GET_PMKID_LIST_CMD” command
++
++GET_WOW_LIST_EVENT
++    Response to the wmiconfig “GET_WOW_LIST” command to
++    retrieve the configured WoW patterns
++
++NEIGHBOR_REPORT
++    Neighbor APs that match the current profile were detected
++
++OPT_RX_FRAME_EVENT
++    (Special feature) informs the host of the reception of a special frame
++
++PSTREAM_TIMEOUT
++    A prioritized stream has been idle for a specified interval
++
++READY
++    The AR6000 device is ready to accept commands
++
++REGDOMAIN
++    The regulatory domain has changed
++
++REPORT_ROAM_DATA_EVENT
++    Reports the roam time calculations made by the device
++    (generated with a special build)
++    —
++
++REPORT_STATISTICS
++    Reply to a “GET_TARGET_STATS” command
++
++ROAM_TBL_EVENT
++    Reports the roam table
++
++RSSI_THRESHOLD
++    Signal strength from the connected AP has crossed the threshold
++    defined in the “RSSI_THRESHOLD_PARAMS” command
++
++SCAN_COMPLETE_EVENT
++    A scan has completed (added status SCAN_ABORTED in release 2.0)
++
++TEST_EVENT
++    Event generated by the TCMD
++
++TKIP_MICERROR
++    TKIP MIC errors were detected
++
++=====================================================================
++
++Name
++    BSSINFO
++
++Synopsis
++    Contains information describing one or more BSSs as collected during a scan.
++    Information includes the BSSID, SSID, RSSI, network type, channel, supported rates,
++    and IEs. BSSINFO events are sent only after the device receives a beacon or probe-
++    response frame that pass the filter specified in the “SET_BSS_FILTER” command.
++    BSSINFO events consist of a small header followed by a copy of the beacon or probe
++    response frame. The 802.11 header is not present. For formats of beacon and probe-
++    response frames please consult the IEEE 802.11 specification.
++
++    The beacons or probe responses containing the IE specified by the
++    WMI_BSS_FILTER_CMD are passed to the host through the
++    WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that
++    were detected in the management frame. The frame type field has been extended to
++    indicate action management frames. This would be helpful to route these frames
++    through the same event mechanism as used by the beacon processing function.
++
++    If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant
++    because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the
++    beacons/probe respones, then the ieMask match dictates whether the BSSINFO
++    event is sent to the host. In the case of action management frames, the ieMask is the
++    filter that is applied.
++
++Event ID
++    0x1004
++
++Event Parameters
++    typedef struct {
++        A_UINT16    channel;
++            Specifies the frequency (in MHz) where the
++            frame was received
++        A_UINT8    frameType;
++            A WMI_BI_FTYPE value
++        A_UINT8    snr;
++        A_INT16    rssi;
++            Indicates signal strength
++        A_UINT8    bssid[ATH_MAC_LEN];
++        A_UINT32    ieMask;
++    } _ATTRIB_PACK_WMI_BSS_INFO_HDR;
++
++    Beacon or Probe Response Frame
++
++Event Values
++    {
++        BEACON_FTYPE    = 0x1
++            Indicates a beacon frame
++        PROBERESP_FTYPE
++            Indicates a probe response frame
++        ACTION_MGMT_FTYPE
++     } WMI_BI_FTYPE
++
++=====================================================================
++
++Name
++    CAC_EVENTID
++
++Synopsis
++    Indicates signalling events in admission control. Events are generated when
++    admission is accepted, rejected, or deleted by either the host or the AP. If the AP does
++    not respond to an admission request within a timeout of 500 ms, an event is
++    generated to the host.
++
++Event ID
++    0x1011
++
++Event Parameters
++    UINT8
++    ac
++    Access class pertaining to the
++signalling
++
++    UINT8    cac_indication
++        Type of indication; indications are
++        listed in WMI_CAC_INDICATION
++
++    UINT8    statusCode
++        AP response status code for a
++        request
++
++    UINT8    tspecSuggestion[63]
++        Suggested TSPEC from AP
++
++Event Values
++    {
++        CAC_INDICATION_ADMISSION = 0x00
++        CAC_INDICATION_ADMISSION_RESP    = 0x01
++        CAC_INDICATION_DELETE    = 0x02
++        CAC_INDICATION_NO_RESP   = 0x03
++    } WMI_CAC_INDICATION
++
++
++=====================================================================
++
++
++Name
++    CMDERROR
++
++Synopsis
++    Indicates that the AR6000 device encountered an error while attempting to process a
++    command. This error is fatal and indicates that the device requires a reset.
++
++Event ID
++    0x1005
++
++Event Parameters
++    UINT16    commandId
++        Corresponds to the command which generated
++        the error
++    UINT8    errorCode
++        A WMI_ERROR_CODE value
++
++Event Values
++    {
++        INVALID_PARAM    = 1
++            Invalid parameter
++        ILLEGAL_STATE    = 2
++            Illegal state
++        INTERNAL_ERROR   = 3
++            Internal Error
++        All other values reserved
++    } WMI_ERROR_CODE
++
++
++=====================================================================
++
++
++Name
++    CONNECT
++
++Synopsis
++    Signals that the AR6000 connected to a wireless network. Connection occurs due to a
++    “CONNECT” command or roaming to a new AP. For infrastructure networks, shows
++    that the AR6000 successfully performed 802.11 authentication and AP association.
++
++Event ID
++    0x1002
++
++Event Parameters
++    UINT16    channel
++        Channel frequency (in MHz) of the network the
++        AR6000 are connected to
++
++    UINT8    bssid[6]
++        MAC address of the AP the AR6000 are
++        connected to or the BSSID of the ad hoc
++        network
++
++    UINT16    listenInterval
++        Listen interval (in Kms) that the AR6000 are
++        using
++
++    UINT 8    beaconIeLen
++        Length (in bytes) of the beacon IEs
++
++    UINT8    assocInfo
++        Pointer to an array containing beacon IEs,
++        followed first by association request IEs then by
++        association response IEs
++
++    UINT8    assocReqLen
++        Length (in bytes) of the assocReqIEs array
++
++    UINT8    assocRespLen
++        Length (in bytes) of the assocRespIEs array
++
++Event Values
++    None defined
++
++=====================================================================
++
++
++Name
++    DISCONNECT
++
++Synopsis
++    Signals that the AR6000 device lost connectivity with the wireless network.
++    DISCONENCT is generated when the device fails to complete a “CONNECT”
++    command or as a result of a transition from a connected state to disconnected state.
++
++    After sending the “DISCONNECT” event the device continually tries to re-establish
++    a connection. A LOST_LINK occurs when STA cannot receive beacons within the
++    specified time for the SET_BMISS_TIME command.
++
++Event ID
++    0x1003
++
++Event Parameters
++    UINT8    disconnect
++        Reason
++        A WMI_DISCONNECT_REASON value
++
++    UINT8    bssid[6]
++        Indicates which BSS the device was connected to
++
++    UINT8    assocRespLen
++        Length of the 802.11 association response frame
++        that triggered this event, or 0 if not applicable
++
++    UINT8    assocInfo[assocRespLen]
++        Copy of the 802.11 association response frame
++
++Event Values
++    {
++        NO_NETWORK_AVAIL    =0x01
++            Indicates that the device was unable to
++            establish or find the desired network
++        LOST_LINK    =0x02
++            Indicates the devices is no longer receiving
++            beacons from the BSS it was previously
++            connected to
++
++        DISCONNECT_CMD  =0x03
++            Indicates a “DISCONNECT” command was
++            processed
++        BSS_DISCONNECTED =0x04
++            Indicates the BSS explicitly disconnected the
++            device. Possible mechanisms include the AP
++            sending 802.11 management frames
++            (e.g., disassociate or deauthentication
++            messages).
++        AUTH_FAILED    =0x05
++            Indicates that the device failed 802.11
++            authentication with the BSS
++        ASSOC_FAILED    =0x06
++            Indicates that the device failed 802.11
++            association with the BSS
++        NO_RESOURCES_AVAIL    =0x07
++            Indicates that a connection failed because the
++            AP had insufficient resources to complete the
++            connection
++        CSERV_DISCONNECT    =0x08
++            Indicates that the device’s connection services
++            module decided to disconnect from a BSS,
++            which can happen for a variety of reasons (e.g.,
++            the host marks the current connected AP as a
++            bad AP).
++        INVALID_PROFILE    =0x0A
++            Indicates that an attempt was made to
++            reconnect to a BSS that no longer matches the
++            current profile
++        All other values are reserved
++    } WMI_DISCONNECT_REASON
++
++
++=====================================================================
++
++
++Name
++    ERROR_REPORT
++
++Synopsis
++    Signals that a type of error has occurred for which the host previously requested
++    notification through the “TARGET_ERROR_REPORT_BITMASK” command.
++
++Event ID
++    0x100D
++
++Event Parameters
++    UINT32    errorVal
++            WMI_TARGET_ERROR_VAL value. See
++            “TARGET_ERROR_REPORT_BITMASK”.
++
++Event Values
++    errorVal
++    = 0x00000001
++    Power save fails
++
++        = 0x00000002
++    No cipher key
++
++        = 0x00000004
++    Decryption error
++
++        = 0x00000008
++    Beacon miss
++
++        = 0x00000010
++    A non-power save disabled node has joined
++    the PS-enabled network
++
++
++=====================================================================
++
++
++Name
++    EXTENSION
++
++Synopsis
++    The WMI is used mostly for wireless control messages to a wireless module that
++    apply to wireless module management regardless of the target platform
++    implementation. However, some events peripherally related to wireless management
++    are desired during operation. These wireless extension events may be platform-
++    specific or implementation-dependent. See “WMI Extension Commands”
++
++
++Event ID
++    0x1010
++
++
++=====================================================================
++
++
++Name
++    GET_PMKID_LIST_EVENT
++
++Synopsis
++    Generated by firmware in response to a “GET_PMKID_LIST_CMD” command.
++
++Event Parameters
++    typedef struct {
++        A_UINT32    numPMKID;
++            Contains the number of PMKIDs in the reply
++        WMI_PMKID   pmkidList[1];
++    } __ATTRIB_PACK WMI_PMKID_LIST_REPLY;
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++Name
++    GET_WOW_LIST_EVENT
++
++Synopsis
++    Response to the wmiconfig –getwowlist command to retrieve the configured Wake on
++    Wireless patterns
++
++Event ID
++    0x10018
++
++Event Parameters
++    {
++
++    A_UINT8    num_filters
++        Total number of patterns in the list
++    A_UINT8    this_filter_num
++        The filter number
++    A_UINT8    wow_mode
++        Shows whether WoW is enabled or disabled
++    A_UINT8    host_mode
++        Shows whether the host is asleep or awake
++    WOW_FILTER    wow_filters[1]
++        List of WoW filters (pattern and mask data bytes)
++    } WMI_GET_WOW_LIST_REPLY;
++
++    {
++        Each wow_filter_list element shows:
++    A_UINT8    wow_valid_filter
++        Whether the filter is valid
++    A_UINT8    wow_filter_list_id
++        Filter List ID (23 = default)
++    A_UINT8    wow_filter_size
++        Size in bytes of the filter
++    A_UINT8    wow_filter_offset
++        Offset of the pattern to search in the data packet
++    A_UINT8    wow_filter_mask[MASK_SIZE]
++        The mask to be applied to the pattern
++    A_UINT8    wow_filter_pattern[WOW_PATTERN_SIZE]
++        The pattern that to match to wake up the host
++    } WOW_FILTER
++
++Event Values
++    None
++
++=====================================================================
++
++
++
++Name
++    NEIGHBOR_REPORT
++
++Synopsis
++    Indicates the existence of neighbor APs that match the current profile. The host uses
++    this event to populate the PMKID cache on the AR6000 and/or to perform
++    preauthentication. This event is only generated in infrastructure mode.
++
++    A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP.
++
++Event ID
++    0x1008
++
++Event Parameters
++    UINT8    numberOfAps
++        The number of APs reported about in
++        this event
++    {
++        UINT8    bssid[6]
++            MAC address of a neighbor AP
++        UINT8    bssFlags
++            A WMI_BSS_FLAGS value
++    }[numberOfAps]
++
++
++Event Values
++    {
++        WMI_DEFAULT_BSS_FLAGS    = 0
++            Logical OR of 1 or more
++        WMI_BSS_FLAGS
++        WMI_PREAUTH_CAPABLE_BSS
++            = 1
++            Indicates that this AP is capable of
++            preauthentication
++        WMI_PMKID_VALID_BSS
++            = 2
++            Indicates that the AR6000 have a
++            valid pairwise master key for this AP
++    } WMI_BSS_FLAGS
++
++
++=====================================================================
++
++
++
++Name
++    OPT_RX_FRAME_EVENT
++
++Synopsis
++    Special feature, informs host of the reception of a special frame.
++
++Event ID
++    0x100E
++
++Event Parameters
++    {
++        A_UINT16    channel;
++        A_UINT8    frameType;
++        A_INT8    snr;
++        A_UINT8    srcAddr[ATH_MAC_LEN];
++        A_UINT8    bssid[ATH_MAC_LEN];
++        }WMI_OPT_RX_INFO_HDR
++
++Event Values
++    None
++
++=====================================================================
++
++
++
++Name
++    PSTREAM_TIMEOUT
++
++Synopsis
++    Indicates that a priority stream that got created as a result of priority-marked data
++    flow (priority marked in IP TOS) being idle for the default inactivity interval period
++    (specified in the “CREATE_PSTREAM” command) used for priority streams created
++    implicitly by the driver. This event is not indicated for user-created priority streams.
++    User-created priority streams exist until the users delete them explicitly. They do not
++    timeout due to data inactivity.
++
++Event ID
++    0x1007
++
++Event Parameters
++    A_UINT8
++    trafficClass
++    Indicated the traffic class of priority
++    stream that timed out
++
++Event Values
++    {
++        WMM_AC_BE    = 0
++            Best effort
++        WMM_AC_BK    = 1
++            Background
++        WMM_AC_VI    = 2
++            Video
++        WMM_AC_VO     = 3
++            Voice
++    } TRAFFIC CLASS
++
++
++=====================================================================
++
++Name
++    READY
++
++Synopsis
++    Indicates that the AR6000 device is prepared to accept commands. It is sent once after
++    power on or reset. It also indicates the MAC address of the device.
++
++Event ID
++    0x1001
++
++Event Parameters
++    UINT8    macAddr[6]
++        Device MAC address
++    UINT8    phyCapability
++        A WMI_PHY_CAPABILITY value. Indicates the
++        capabilities of the device wireless module’s radio
++
++Event Values
++    {
++        WMI_11A_CAPABILITY       = 1
++        WMI_11G_CAPABILITY       = 2
++        WMI_11AG_CAPABILITY      = 3
++    } WMI_PHY_CAPABILITY
++
++
++=====================================================================
++
++Name
++    REGDOMAIN
++
++Synopsis
++    Indicates that the regulatory domain has changed. It initially occurs when the
++    AR6000 device reads the board data information. The regulatory domain can also
++    change when the device is a world-mode SKU. In this case, the regulatory domain is
++    based on the country advertised by APs per the IEEE 802.11d specification. A
++    potential side effect of a regulatory domain change is a change in the list of available
++    channels. Any channel restrictions that exist as a result of a previous
++    “SET_CHANNEL_PARAMETERS” command are lifted.
++
++Event ID
++    0x1006
++
++Event Parameters
++    UINT32    regDomain
++        The range of 0x0000 – 0x00FF
++        corresponds to an ISO country code.
++
++    Other regCodes are reserved for world
++    mode settings and specific regulatory
++    domains.
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    REPORT_STATISTICS
++
++Synopsis
++    A reply to a “GET_TARGET_STATS” command.
++
++Event ID
++    0x100B
++
++Event Parameters
++    When the statistics are sent to the host, the AR6001 clear them so that a new set of
++    statistics are collected for the next report.
++
++    UINT32    tx_packets
++    UINT32    tx_bytes
++    UINT32    tx_unicast_pkts
++    UINT32    tx_unicast_bytes
++    UINT32    tx_multicast_pkts
++    UINT32    tx_multicast_bytes
++    UINT32    tx_broadcast_pkts
++    UINT32    tx_broadcast_bytes
++    UINT32    tx_rts_success_cnt
++    UINT32    tx_packet_per_ac[4]
++        Tx packets per AC: [0] = BE, [1] = BK,
++        [2] = VI, [3] = VO
++    UINT32    tx_errors
++        Number of packets which failed Tx, due
++        to all failures
++    ... REPORT_STATISTICS, continued
++    UINT32    tx_failed_cnt
++        Number of data packets that failed Tx
++    UINT32    tx_retry_cnt
++        Number of Tx retries for all packets
++    UINT32    tx_rts_fail_cnt
++        Number of RTS Tx failed count
++    UINT32    rx_packets
++    UINT32    rx_bytes
++    UINT32    rx_unicast_pkts
++    UINT32    rx_unicast_bytes
++    UINT32    rx_multicast_pkts
++    UINT32    rx_multicast_bytes
++    UINT32    rx_broadcast_pkts
++    UINT32    rx_broadcast_bytes
++    UINT32    rx_fragment_pkt
++        Number of fragmented packets received
++    UINT32    rx_errors
++        Number of Rx errors due to all failures
++    UINT32    rx_crcerr
++        Number of Rx errors due to CRC errors
++    UINT32    rx_key_cache_miss
++        Number of Rx errors due to a key not
++        being plumbed
++    UINT32    rx_decrypt_err
++        Number of Rx errors due to decryption
++        failure
++    UINT32    rx_duplicate_frames
++        Number of duplicate frames received
++    UINT32    tkip_local_mic_failure
++        Number of TKIP MIC errors detected
++    UINT32    tkip_counter_measures_invoked
++        Number of times TKIP countermeasures
++        were invoked
++    UINT32    tkip_replays
++        Number of frames that replayed a TKIP
++        encrypted frame received earlier
++    UINT32    tkip_format_errors
++        Number of frames that did not conform
++        to the TKIP frame format
++    UINT32    ccmp_format_errors
++        Number of frames that did not conform
++        to the CCMP frame format
++    UINT32    ccmp_replays
++        Number of frames that replayed a CCMP
++        encrypted frame received earlier
++    UINT32    power_save_failure_cnt
++        Number of failures that occurred when
++        the AR6001 could not go to sleep
++    UINT32    cs_bmiss_cnt
++        Number of BMISS interrupts since
++    connection
++    UINT32    cs_lowRssi_cnt
++        Number of the times the RSSI went below
++        the low RSSI threshold
++    UINT16    cs_connect_cnt
++        Number of connection times
++    UINT16    cs_disconnect_cnt
++        Number of disconnection times
++    UINT8    cs_aveBeacon_rssi
++        The current averaged value of the RSSI
++        from the beacons of the connected BSS
++    UINT8    cs_lastRoam_msec
++        Time that the last roaming took, in ms.
++        This time is the difference between
++        roaming start and actual connection.
++
++Event Values
++    None defined
++
++
++=====================================================================
++
++Name
++    ROAM_TBL_EVENT
++
++Synopsis
++    Reports the roam table, which contains the current roam mode and this information
++    for every BSS:
++
++Event ID
++    0x100F
++
++Event Parameters
++    A_UINT8     bssid[ATH_MAC_LEN];
++        BSSID
++    A_UINT8     rssi
++        Averaged RSSI
++    A_UINT8     rssidt
++        Change in RSSI
++    A_UINT8     last_rssi
++        Last recorded RSSI
++    A_UINT8     roam_util
++        Utility value used in roaming decision
++    A_UINT8     util
++        Base utility with the BSS
++    A_UINT8     bias
++        Host configured for this BSS
++
++Event Values
++    roamMode
++        Current roam mode
++
++        = 1
++    RSSI based roam
++
++        = 2
++    Host bias-based roam
++
++        = 3
++    Lock to the current BSS
++
++        = 4
++    Autonomous roaming disabled
++
++
++=====================================================================
++
++Name
++    RSSI_THRESHOLD
++
++Synopsis
++    Alerts the host that the signal strength from the connected AP has crossed a
++    interesting threshold as defined in a previous “RSSI_THRESHOLD_PARAMS”
++    command.
++
++Event ID
++    0x100C
++
++Event Parameters
++    UINT8    range
++        A WMI_RSSI_THRESHOLD_VAL
++        value, which indicates the range of
++        the average signal strength
++
++Event Values
++    {
++        WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL  = 1
++        WMI_RSSI_LOWTHRESHOLD_LOWERVAL        = 2
++        WMI_RSSI_LOWTHRESHOLD_UPPERVAL        = 3
++        WMI_RSSI_HIGHTHRESHOLD_LOWERVAL       = 4
++        WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL      = 5
++    } WMI_RSSI_THRESHOLD_VAL
++
++
++=====================================================================
++
++Name
++    SCAN_COMPLETE_EVENT
++
++Synopsis
++    Indicates the scan status. if the Scan was not completed, this event is generated with
++    the status A_ECANCELED.
++
++Event ID
++    0x100A
++
++Event Parameters
++    A_UINT8    scanStatus
++
++Event Values
++    {
++        #define     SCAN_ABORTED 16
++        #define     SCAN_COMPLETED 0
++        A_UINT8     scanStatus
++            A_OK or A_ECANCELED
++    } WMI_SCAN_COMPLETE_EVENT;
++
++
++=====================================================================
++
++Name
++    TEST_EVENT
++
++Synopsis
++    The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to
++    communicate events from target to host. The events are parsed by the TCMD
++    application and WMI layer is oblivious of it.
++
++Event ID
++    0x1016
++
++Event Parameters
++    WMI_TEST_EVENTID
++
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    TKIP_MICERR
++
++Synopsis
++    Indicates that TKIP MIC errors were detected.
++
++Event ID
++    0x1009
++
++Event Parameters
++    UINT8    keyid
++        Indicates the TKIP key ID
++
++    UINT8    ismcast
++        0 = Unicast
++        1 = Multicast
++
++Event Values
++    See event parameters
++
++=====================================================================
++
++WMI Extension Commands
++
++The WMI EXTENSION command is used to multiplex a collection of
++commands that:
++
++        Are not generic wireless commands
++        May be implementation-specific
++        May be target platform-specific
++        May be optional for a host implementation
++
++    An extension command is sent to the AR6000 targets like any other WMI
++command message and uses the WMI_EXTENSION. The first field of the
++payload for this EXTENSION command is another commandId, sometimes
++called the subcommandId, which indicates which extension command is
++being used. A subcommandId-specific payload follows the subcommandId.
++
++All extensions (subcommandIds) are listed in the header file include/wmix.h.
++See also “WMI Extension Events” on page B-58.
++
++
++WMI Extension Commands
++
++
++GPIO_INPUT_GET
++    Read GPIO pins configured for input
++
++GPIO_INTR_ACK
++    Acknowledge and re-arm GPIO interrupts reported earlier
++
++GPIO_OUTPUT_SET
++    Manage output on GPIO pins configured for output
++
++GPIO_REGISTER_GET
++    Read an arbitrary GPIO register
++
++GPIO_REGISTER_SET
++    Dynamically change GPIO configuration
++
++SET_LQTHRESHOLD
++    Set link quality thresholds; the sampling happens at every unicast
++    data frame Tx, if certain thresholds are met, and corresponding
++    events are sent to the host
++
++
++=====================================================================
++
++Name
++    GPIO_INPUT_GET
++
++Synopsis
++    Allows the host to read GPIO pins that are configured for input. The values read are
++    returned through a “GPIO_DATA” extension event.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    None
++
++
++
++Reply Parameters
++    None
++
++
++Reset Value
++    None
++
++
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    GPIO_INTR_ACK
++
++Synopsis
++    The host uses this command to acknowledge and to re-arm GPIO interrupts reported
++    through an earlier “GPIO_INTR” extension event. A single “GPIO_INTR_ACK”
++    command should be used to acknowledge all GPIO interrupts that the host knows to
++    be outstanding (if pending interrupts are not acknowledged through
++    “GPIO_INTR_ACK”, another “GPIO_INTR” extension event is raised).
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    ack_mask
++        A mask of interrupting GPIO pins (e.g., ack_mask
++        bit [3] acknowledges an interrupt from the pin GPIO3).
++
++Command Values
++    None
++
++Reset Value
++    None
++
++Restrictions
++    The host should acknowledge only interrupts about which it was notified.
++
++
++=====================================================================
++
++Name
++    GPIO_OUTPUT_SET
++
++Synopsis
++    Manages output on GPIO pins configured for output.
++
++    Conflicts between set_mask and clear_mask or enable_mask and disable_mask result
++    in undefined behavior.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    set_mask
++        Specifies which pins should drive a 1 out
++    UINT32    clear_mask
++        Specifies which pins should drive a 0 out
++    UINT32    enable_mask
++        Specifies which pins should be enabled for output
++    UINT32    disable_mask
++        Specifies which pins should be disabled for output
++
++Command Values
++    None
++
++
++Reset Value
++    None
++
++
++Restrictions
++    None
++
++
++
++=====================================================================
++
++
++Name
++    GPIO_REGISTER_GET
++
++Synopsis
++    Allows the host to read an arbitrary GPIO register. It is intended for use during
++    bringup/debug. The target responds to this command with a “GPIO_DATA” event.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32
++    gpioreg_id
++    Specifies a GPIO register identifier, as defined
++in include/AR6000/AR6000_gpio.h
++
++Reply Parameters
++    None
++
++Reset Value
++    N/A
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    GPIO_REGISTER_SET
++
++Synopsis
++    Allows the host to dynamically change GPIO configuration (usually handled
++    statically through the GPIO configuration DataSet).
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    gpioreg_id
++        Specifies a GPIO register identifier, as defined in
++        include/AR6000/AR6000_gpio.h
++    UINT32    value
++        Specifies a value to write to the specified
++        GPIO register
++
++Command Values
++    None
++
++
++Reset Value
++    Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM
++    Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This
++    configuration is modified by the GPIO Configuration DataSet, if one exists.
++
++Restrictions
++    None
++
++
++=====================================================================
++
++
++Name
++    SET_LQTHRESHOLD
++
++Synopsis
++    Set link quality thresholds, the sampling happens at every unicast data frame Tx, if
++    certain threshold is met, corresponding event will be sent to host.
++
++Command
++    wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>...
++    <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4>
++
++Command Parameters
++    A_UINT8   enable;
++    A_UINT8   thresholdAbove1_Val;
++    A_UINT8   thresholdAbove2_Val;
++    A_UINT8   thresholdAbove3_Val;
++    A_UINT8   thresholdAbove4_Val;
++    A_UINT8   thresholdBelow1_Val;
++    A_UINT8   thresholdBelow2_Val;
++    A_UINT8   thresholdBelow3_Val;
++    A_UINT8   thresholdBelow4_Val;
++
++Command Values
++    enable
++    = 0
++    Disable link quality sampling
++
++        = 1
++    Enable link quality sampling
++
++
++    thresholdAbove_Val
++    [1...4]
++    Above thresholds (value in [0,100]), in ascending
++    order threshold
++
++    Below_Val [1...4] = below thresholds (value
++    in [0,100]), in ascending order
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++=====================================================================
++WMI Extension Events
++
++The WMI EXTENSION event is used for a collection of events that:
++
++    Are not generic wireless events
++    May be implementation-specific
++    May be target platform-specific
++    May be optional for a host implementation
++
++    An extension event is sent from the AR6000 device targets to the host just like
++any other WMI event message, using the WMI_EXTENSION_EVENTID. The
++first field of the payload for this “EXTENSION” event is another commandId
++(sometimes called the subcommandId) that indicates which “EXTENSION”
++event is being used. A subcommandId-specific payload follows the
++subcommandId.
++
++All extensions (subcommandIds) are listed in the header file include/wmix.h.
++See also “WMI Extension Commands” on page B-55.
++
++
++WMI Extension Events
++
++
++GPIO_ACK
++    Acknowledges a host set command has been processed by the device
++
++GPIO_DATA
++    Response to a host’s request for data
++
++GPIO_INTR
++    Signals that GPIO interrupts are pending
++
++
++=====================================================================
++
++Name
++    GPIO_ACK
++
++Synopsis
++    Acknowledges that a host set command (either “GPIO_OUTPUT_SET” or
++    “GPIO_REGISTER_SET”) has been processed by the AR6000 device.
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    None
++
++
++Event Values
++    None
++
++=====================================================================
++
++
++Name
++    GPIO_DATA
++
++Synopsis
++    The AR6000 device uses this event to respond to the host’s earlier request for data
++    (through either a “GPIO_REGISTER_GET” or a “GPIO_INPUT_GET” command).
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    UINT32    value
++        Holds the data of interest, which is either a register value
++        (in the case of “GPIO_REGISTER_GET”) or a mask of
++        pin inputs (in the case of “GPIO_INPUT_GET”).
++    UINT32    reg_id
++        Indicates which register was read (in the case of
++        “GPIO_REGISTER_GET”) or is GPIO_ID_NONE (in the
++        case of “GPIO_INPUT_GET”)
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    GPIO_INTR
++
++Synopsis
++    The AR6000 device raises this event to signal that GPIO interrupts are pending.
++    These GPIOs may be interrupts that occurred after the last “GPIO_INTR_ACK”
++    command was issued, or may be GPIO interrupts that the host failed to acknowledge
++    in the last “GPIO_INTR_ACK”. The AR6000 will not raise another GPIO_INTR
++    event until this event is acknowledged through a “GPIO_INTR_ACK” command.
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    UINT32    intr_mask
++        Indicates which GPIO interrupts are currently pending
++
++    UINT32    input_values
++        A recent copy of the GPIO input values, taken at the
++        time the most recent GPIO interrupt was processed
++
++Event Values
++    None
++
++
++
++=====================================================================
++#endif
+diff --git a/drivers/ar6000/wmi/wmi_host.h b/drivers/ar6000/wmi/wmi_host.h
+new file mode 100644
+index 0000000..57844bc
+--- /dev/null
++++ b/drivers/ar6000/wmi/wmi_host.h
+@@ -0,0 +1,71 @@
++#ifndef _WMI_HOST_H_
++#define _WMI_HOST_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains local definitios for the wmi host module.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct wmi_stats {
++    A_UINT32    cmd_len_err;
++    A_UINT32    cmd_id_err;
++};
++
++struct wmi_t {
++    A_BOOL                          wmi_ready;
++    A_BOOL                          wmi_numQoSStream;
++    A_UINT8                         wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT];
++    WMI_PRI_STREAM_ID               wmi_ac2WmiStreamMapping[WMM_NUM_AC];
++    A_UINT16                        wmi_streamExistsForAC[WMM_NUM_AC];
++    A_UINT8                         wmi_fatPipeExists;
++    void                           *wmi_devt;
++    struct wmi_stats                wmi_stats;
++    struct ieee80211_node_table     wmi_scan_table;
++    A_UINT8                         wmi_bssid[ATH_MAC_LEN];
++    A_UINT8                         wmi_powerMode;
++    A_UINT8                         wmi_phyMode;
++    A_UINT8                         wmi_keepaliveInterval;
++    A_MUTEX_T                       wmi_lock;
++};
++
++#define WMI_INIT_WMISTREAM_AC_MAP(w) \
++{  (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \
++   (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \
++   (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \
++   (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; }
++
++#define WMI_WMISTREAM_ACCESSCATEGORY(w,s)      (w)->wmi_wmiStream2AcMapping[s]
++#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac)       (w)->wmi_ac2WmiStreamMapping[ac]
++
++#define LOCK_WMI(w)     A_MUTEX_LOCK(&(w)->wmi_lock);
++#define UNLOCK_WMI(w)   A_MUTEX_UNLOCK(&(w)->wmi_lock);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_HOST_H_ */
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index d3b2953..fea341e 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -75,6 +75,12 @@ config GPIO_BASIC_MMIO
+ 	help
+ 	  Say yes here to support basic memory-mapped GPIO controllers.
+ 
++config GPIO_GLAMO
++	tristate "Glamo GPIO support"
++	depends on MFD_GLAMO
++	help
++	  Say yes here to support GPIO functionality of the Smedia Glamo.
++
+ config GPIO_IT8761E
+ 	tristate "IT8761E GPIO support"
+ 	depends on GPIOLIB
+@@ -294,6 +300,13 @@ config GPIO_ADP5588_IRQ
+ 	  Say yes here to enable the adp5588 to be used as an interrupt
+ 	  controller. It requires the driver to be built in the kernel.
+ 
++config GPIO_PCF50633
++	tristate "GPIO support for NXP PCF50633"
++	depends on MFD_PCF50633
++	help
++	 Say yes here if you want to include support GPIO for pins on
++	 the PCF50633 chip.
++
+ comment "PCI GPIO expanders:"
+ 
+ config GPIO_CS5535
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index becef59..d5f3c31 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
+ obj-$(CONFIG_GPIO_ADP5520)	+= adp5520-gpio.o
+ obj-$(CONFIG_GPIO_ADP5588)	+= adp5588-gpio.o
+ obj-$(CONFIG_GPIO_BASIC_MMIO)	+= basic_mmio_gpio.o
++obj-$(CONFIG_GPIO_GLAMO)	+= glamo-gpio.o
+ obj-$(CONFIG_GPIO_LANGWELL)	+= langwell_gpio.o
+ obj-$(CONFIG_GPIO_MAX730X)	+= max730x.o
+ obj-$(CONFIG_GPIO_MAX7300)	+= max7300.o
+@@ -43,3 +44,4 @@ obj-$(CONFIG_GPIO_SX150X)	+= sx150x.o
+ obj-$(CONFIG_GPIO_VX855)	+= vx855_gpio.o
+ obj-$(CONFIG_GPIO_ML_IOH)	+= ml_ioh_gpio.o
+ obj-$(CONFIG_AB8500_GPIO)       += ab8500-gpio.o
++obj-$(CONFIG_GPIO_PCF50633)	+= pcf50633-gpio.o
+diff --git a/drivers/gpio/glamo-gpio.c b/drivers/gpio/glamo-gpio.c
+new file mode 100644
+index 0000000..1e9986b
+--- /dev/null
++++ b/drivers/gpio/glamo-gpio.c
+@@ -0,0 +1,250 @@
++/* Smedia Glamo 336x/337x gpio driver
++ *
++ * (C) 2009,2011 Lars-Peter Clausen <lars@metafoo.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#include <linux/gpio.h>
++#include <linux/mfd/glamo.h>
++#include <linux/mfd/glamo-core.h>
++#include <linux/mfd/glamo-regs.h>
++
++#define GLAMO_NR_GPIO 21
++#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIO, 4)
++
++#define GLAMO_GPIO_REG(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1)
++
++struct glamo_gpio {
++	struct glamo_core *glamo;
++	struct gpio_chip chip;
++	uint16_t saved_regs[GLAMO_NR_GPIO_REGS];
++};
++
++#define GLAMO_GPIO_REG_GPIO(gpio)	GLAMO_GPIO_REG((gpio) >> 2)
++#define GLAMO_GPIO_BIT(gpio, offset)	BIT(((gpio) & 0x3) + (offset))
++#define GLAMO_GPIO_DIRECTION_BIT(gpio)	GLAMO_GPIO_BIT((gpio), 0)
++#define GLAMO_GPIO_OUTPUT_BIT(gpio)	GLAMO_GPIO_BIT((gpio), 4)
++#define GLAMO_GPIO_INPUT_BIT(gpio)	GLAMO_GPIO_BIT((gpio), 8)
++#define GLAMO_GPIO_FUNC_BIT(gpio)	GLAMO_GPIO_BIT((gpio), 12)
++
++
++static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip)
++{
++	return container_of(chip, struct glamo_gpio, chip)->glamo;
++}
++
++static void glamo_gpio_modify_reg(struct gpio_chip *chip, unsigned offset,
++    uint16_t set, uint16_t clear)
++{
++	struct glamo_core *glamo = chip_to_glamo(chip);
++	void __iomem *reg = glamo->base + GLAMO_GPIO_REG_GPIO(offset);
++	uint16_t tmp;
++
++	spin_lock(&glamo->lock);
++	tmp = readw(reg);
++	tmp |= set;
++	tmp &= ~clear;
++	writew(tmp, reg);
++	spin_unlock(&glamo->lock);
++}
++
++static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++	uint16_t mask = GLAMO_GPIO_OUTPUT_BIT(offset);
++	glamo_gpio_modify_reg(chip, offset, value ? mask : 0, value ? 0 : mask);
++}
++
++static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++	struct glamo_core *glamo = chip_to_glamo(chip);
++	void __iomem *reg = glamo->base + GLAMO_GPIO_REG_GPIO(offset);
++
++	return !!(readw(reg) & GLAMO_GPIO_INPUT_BIT(offset));
++}
++
++static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++	glamo_gpio_modify_reg(chip, offset, GLAMO_GPIO_FUNC_BIT(offset), 0);
++
++	return 0;
++}
++
++static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset)
++{
++	glamo_gpio_modify_reg(chip, offset, 0, GLAMO_GPIO_FUNC_BIT(offset));
++}
++
++static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
++				       int value)
++{
++	uint16_t output_mask = GLAMO_GPIO_OUTPUT_BIT(offset);
++	uint16_t set, clear;
++
++	clear = GLAMO_GPIO_DIRECTION_BIT(offset);
++
++	if (value) {
++		set = output_mask;
++	} else {
++		set = 0;
++		clear |= output_mask;
++	}
++
++	glamo_gpio_modify_reg(chip, offset, set, clear);
++
++	return 0;
++}
++
++static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++	glamo_gpio_modify_reg(chip, offset, GLAMO_GPIO_DIRECTION_BIT(offset), 0);
++
++	return 0;
++}
++
++static const struct __devinit gpio_chip glamo_gpio_chip = {
++	.label			= "glamo",
++	.request		= glamo_gpio_request,
++	.free			= glamo_gpio_free,
++	.direction_input	= glamo_gpio_direction_input,
++	.direction_output	= glamo_gpio_direction_output,
++	.get			= glamo_gpio_get,
++	.set			= glamo_gpio_set,
++	.base			= -1,
++	.ngpio			= GLAMO_NR_GPIO,
++	.owner			= THIS_MODULE,
++};
++
++static int __devinit glamo_gpio_probe(struct platform_device *pdev)
++{
++	struct glamo_platform_data *pdata = pdev->dev.parent->platform_data;
++	struct glamo_gpio *glamo_gpio;
++	int ret;
++
++	glamo_gpio = kzalloc(sizeof(*glamo_gpio), GFP_KERNEL);
++	if (!glamo_gpio)
++		return -ENOMEM;
++
++	glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent);
++	glamo_gpio->chip = glamo_gpio_chip;
++	glamo_gpio->chip.dev = &pdev->dev;
++	if (pdata && pdata->gpio_data)
++		glamo_gpio->chip.base = pdata->gpio_data->base;
++
++	ret = gpiochip_add(&glamo_gpio->chip);
++
++	if (ret) {
++		dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret);
++		goto err;
++	}
++
++	platform_set_drvdata(pdev, glamo_gpio);
++
++	return 0;
++err:
++	kfree(glamo_gpio);
++	return ret;
++}
++
++static int __devexit glamo_gpio_remove(struct platform_device *pdev)
++{
++	struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev);
++	int ret;
++
++	ret = gpiochip_remove(&glamo_gpio->chip);
++	if (!ret)
++		goto done;
++
++	platform_set_drvdata(pdev, NULL);
++	kfree(glamo_gpio);
++
++done:
++	return ret;
++}
++
++#ifdef CONFIG_PM_SLEEP
++
++static int glamo_gpio_suspend(struct device *dev)
++{
++	struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
++	struct glamo_core *glamo = glamo_gpio->glamo;
++	uint16_t *saved_regs = glamo_gpio->saved_regs;
++	int i;
++
++	spin_lock(&glamo->lock);
++	for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
++		saved_regs[i] = readw(glamo->base + GLAMO_GPIO_REG(i));
++	spin_unlock(&glamo->lock);
++
++	return 0;
++}
++
++static int glamo_gpio_resume(struct device *dev)
++{
++	struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
++	struct glamo_core *glamo = glamo_gpio->glamo;
++	uint16_t *saved_regs = glamo_gpio->saved_regs;
++	int i;
++
++	spin_lock(&glamo->lock);
++	for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
++		writew(saved_regs[i], glamo->base + GLAMO_GPIO_REG(i));
++	spin_unlock(&glamo->lock);
++	return 0;
++}
++
++static SIMPLE_DEV_PM_OPS(glamo_pm_ops, glamo_gpio_suspend, glamo_gpio_resume);
++
++#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops)
++
++#else
++#define GLAMO_GPIO_PM_OPS NULL
++#endif
++
++static struct platform_driver glamo_gpio_driver = {
++	.probe = glamo_gpio_probe,
++	.remove = __devexit_p(glamo_gpio_remove),
++	.driver = {
++		.name  = "glamo-gpio",
++		.owner = THIS_MODULE,
++		.pm    = GLAMO_GPIO_PM_OPS,
++	},
++};
++
++static int __init glamo_gpio_init(void)
++{
++	return platform_driver_register(&glamo_gpio_driver);
++}
++module_init(glamo_gpio_init);
++
++static void __exit glamo_gpio_exit(void)
++{
++	platform_driver_unregister(&glamo_gpio_driver);
++}
++module_exit(glamo_gpio_exit);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:glamo-gpio");
+diff --git a/drivers/gpio/pcf50633-gpio.c b/drivers/gpio/pcf50633-gpio.c
+new file mode 100644
+index 0000000..eb044e8
+--- /dev/null
++++ b/drivers/gpio/pcf50633-gpio.c
+@@ -0,0 +1,228 @@
++/* NXP PCF50633 GPIO Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50633 driver mainly by
++ * Harald Welte, Andy Green and Werner Almesberger
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/mfd/pcf50633/gpio.h>
++#include <linux/gpio.h>
++
++#define PCF50633_REG_GPIOCTL	0x13
++#define PCF50633_REG_GPIOCFG(x) (0x14 + (x))
++
++enum pcf50633_regulator_id {
++	PCF50633_REGULATOR_AUTO,
++	PCF50633_REGULATOR_DOWN1,
++	PCF50633_REGULATOR_DOWN2,
++	PCF50633_REGULATOR_LDO1,
++	PCF50633_REGULATOR_LDO2,
++	PCF50633_REGULATOR_LDO3,
++	PCF50633_REGULATOR_LDO4,
++	PCF50633_REGULATOR_LDO5,
++	PCF50633_REGULATOR_LDO6,
++	PCF50633_REGULATOR_HCLDO,
++	PCF50633_REGULATOR_MEMLDO,
++};
++
++#define PCF50633_REG_AUTOOUT	0x1a
++#define PCF50633_REG_DOWN1OUT	0x1e
++#define PCF50633_REG_DOWN2OUT	0x22
++#define PCF50633_REG_MEMLDOOUT	0x26
++#define PCF50633_REG_LDO1OUT	0x2d
++#define PCF50633_REG_LDO2OUT	0x2f
++#define PCF50633_REG_LDO3OUT	0x31
++#define PCF50633_REG_LDO4OUT	0x33
++#define PCF50633_REG_LDO5OUT	0x35
++#define PCF50633_REG_LDO6OUT	0x37
++#define PCF50633_REG_HCLDOOUT	0x39
++
++static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
++	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
++	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
++	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
++	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
++	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
++	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
++	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
++	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
++	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
++	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
++	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
++};
++
++struct pcf50633_gpio {
++	struct pcf50633 *pcf;
++	struct gpio_chip chip;
++};
++
++static inline struct pcf50633 *gpio_chip_to_pcf50633(struct gpio_chip *chip)
++{
++	struct pcf50633 *pcf = dev_to_pcf50633(chip->dev->parent);
++	return pcf;
++}
++
++static void pcf50633_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
++{
++	struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip);
++	u8 reg;
++
++	reg = PCF50633_REG_GPIOCFG(gpio);
++
++	pcf50633_reg_set_bit_mask(pcf, reg, 0x07, value ? 0x7 : 0x0);
++}
++
++static int pcf50633_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip);
++	return pcf50633_reg_read(pcf, PCF50633_REG_GPIOCFG(gpio)) >> 3;
++}
++
++
++static int pcf50633_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++                                          int value)
++{
++	struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip);
++	int ret;
++
++	ret = pcf50633_gpio_set_config(pcf, pcf->pdata->gpio_base + gpio,
++	                               PCF50633_GPIO_CONFIG_OUTPUT);
++	if (!ret)
++	    pcf50633_gpio_set_value(chip, gpio, value);
++
++	return ret;
++}
++
++static int pcf50633_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++	return -ENOSYS;
++}
++
++int pcf50633_gpio_set_config(struct pcf50633 *pcf, unsigned gpio,
++                              enum pcf50633_gpio_config config)
++{
++	u8 reg;
++	u8 direction;
++	int ret;
++
++	gpio -= pcf->pdata->gpio_base;
++
++	if (gpio < 3) {
++	    direction = (config == PCF50633_GPIO_CONFIG_INPUT) ? (1 << gpio) : 0;
++	    ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_GPIOCTL, (1 << gpio),
++					    direction);
++	    if (ret) {
++			return ret;
++		}
++	} else if (gpio > 3 || config == PCF50633_GPIO_CONFIG_INPUT) {
++	    return -EINVAL;
++	}
++
++	if (config != PCF50633_GPIO_CONFIG_INPUT) {
++	    reg = PCF50633_REG_GPIOCFG(gpio);
++	    ret = pcf50633_reg_set_bit_mask(pcf, reg, 0x0f, config);
++	}
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50633_gpio_set_config);
++
++int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
++					int gpio, int regulator, int on)
++{
++	u8 reg, val, mask;
++
++	gpio -= pcf->pdata->gpio_base;
++
++	/* the *ENA register is always one after the *OUT register */
++	reg = pcf50633_regulator_registers[regulator] + 1;
++
++	val = !!on << (gpio - PCF50633_GPIO1);
++	mask = 1 << (gpio - PCF50633_GPIO1);
++
++	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
++}
++EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
++
++
++static int __devinit pcf50633_gpio_probe(struct platform_device *pdev)
++{
++	struct pcf50633 *pcf = dev_to_pcf50633(pdev->dev.parent);
++	struct pcf50633_gpio *pcf_gpio;
++
++	pcf_gpio = kzalloc(sizeof(*pcf_gpio), GFP_KERNEL);
++
++	if (!pcf_gpio)
++		return -ENOMEM;
++
++	pcf_gpio->pcf = pcf;
++
++	pcf_gpio->chip.direction_input = pcf50633_gpio_direction_input;
++	pcf_gpio->chip.direction_output = pcf50633_gpio_direction_output;
++	pcf_gpio->chip.get = pcf50633_gpio_get_value;
++	pcf_gpio->chip.set = pcf50633_gpio_set_value;
++
++	pcf_gpio->chip.base = pcf->pdata->gpio_base;
++	pcf_gpio->chip.ngpio = 4;
++	pcf_gpio->chip.label = dev_name(pcf->dev);
++	pcf_gpio->chip.can_sleep = 1;
++	pcf_gpio->chip.owner = THIS_MODULE;
++	pcf_gpio->chip.dev = &pdev->dev;
++
++	platform_set_drvdata(pdev, pcf_gpio);
++
++	return gpiochip_add(&pcf_gpio->chip);
++}
++
++static int __devexit pcf50633_gpio_remove(struct platform_device *pdev)
++{
++	struct pcf50633_gpio *pcf_gpio = platform_get_drvdata(pdev);
++
++	gpiochip_remove(&pcf_gpio->chip);
++
++	platform_set_drvdata(pdev, NULL);
++	kfree(pcf_gpio);
++
++	return 0;
++}
++
++static struct platform_driver pcf50633_gpio_driver = {
++	.probe = pcf50633_gpio_probe,
++	.remove = __devexit_p(pcf50633_gpio_remove),
++	.driver = {
++		.name = "pcf50633-gpio",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init pcf50633_gpio_init(void)
++{
++	return platform_driver_register(&pcf50633_gpio_driver);
++}
++module_init(pcf50633_gpio_init);
++
++void __exit pcf50633_gpio_exit(void)
++{
++	platform_driver_unregister(&pcf50633_gpio_driver);
++}
++module_exit(pcf50633_gpio_exit);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("GPIO driver for the PCF50633");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
+index 9556273..983d5c8 100644
+--- a/drivers/input/misc/pcf50633-input.c
++++ b/drivers/input/misc/pcf50633-input.c
+@@ -20,6 +20,7 @@
+ #include <linux/device.h>
+ #include <linux/platform_device.h>
+ #include <linux/input.h>
++#include <linux/interrupt.h>
+ #include <linux/slab.h>
+ 
+ #include <linux/mfd/pcf50633/core.h>
+@@ -31,26 +32,27 @@
+ struct pcf50633_input {
+ 	struct pcf50633 *pcf;
+ 	struct input_dev *input_dev;
++	int irq_pressed;
++	int irq_released;
+ };
+ 
+-static void
+-pcf50633_input_irq(int irq, void *data)
++static irqreturn_t pcf50633_input_irq(int irq, void *data)
+ {
+-	struct pcf50633_input *input;
++	struct pcf50633_input *input = data;
+ 	int onkey_released;
+ 
+-	input = data;
+-
+ 	/* We report only one event depending on the key press status */
+ 	onkey_released = pcf50633_reg_read(input->pcf, PCF50633_REG_OOCSTAT)
+ 						& PCF50633_OOCSTAT_ONKEY;
+ 
+-	if (irq == PCF50633_IRQ_ONKEYF && !onkey_released)
++	if (irq == input->irq_pressed && !onkey_released)
+ 		input_report_key(input->input_dev, KEY_POWER, 1);
+-	else if (irq == PCF50633_IRQ_ONKEYR && onkey_released)
++	else if (irq == input->irq_released && onkey_released)
+ 		input_report_key(input->input_dev, KEY_POWER, 0);
+ 
+ 	input_sync(input->input_dev);
++
++	return IRQ_HANDLED;
+ }
+ 
+ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
+@@ -58,7 +60,22 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
+ 	struct pcf50633_input *input;
+ 	struct input_dev *input_dev;
+ 	int ret;
++	int irq_released;
++	int irq_pressed;
++
++	irq_released = platform_get_irq_byname(pdev, "ONKEYR");
++	if (irq_released <= 0) {
++		dev_err(&pdev->dev, "Failed to get released irq: %d\n",
++			irq_released);
++		return irq_released ?: -EINVAL;
++	}
+ 
++	irq_pressed = platform_get_irq_byname(pdev, "ONKEYF");
++	if (irq_pressed <= 0) {
++		dev_err(&pdev->dev, "Failed to get pressed irq: %d\n",
++			irq_pressed);
++		return irq_pressed ?: -EINVAL;
++	}
+ 
+ 	input = kzalloc(sizeof(*input), GFP_KERNEL);
+ 	if (!input)
+@@ -85,20 +102,41 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
+ 		kfree(input);
+ 		return ret;
+ 	}
+-	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYR,
+-				pcf50633_input_irq, input);
+-	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYF,
+-				pcf50633_input_irq, input);
++
++	ret = request_threaded_irq(irq_released, NULL, pcf50633_input_irq, 0,
++			"onkey released", input);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request released irq: %d\n", ret);
++		goto err_input_unregister;
++	}
++	ret = request_threaded_irq(irq_pressed, NULL, pcf50633_input_irq, 0,
++			"onkey pressed", input);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request pressed irq: %d\n", ret);
++		goto err_free_irq;
++	}
++
++	input->irq_released = irq_released;
++	input->irq_pressed = irq_pressed;
++
+ 
+ 	return 0;
++
++err_free_irq:
++	free_irq(irq_pressed, input);
++err_input_unregister:
++	input_unregister_device(input->input_dev);
++	kfree(input);
++
++	return ret;
+ }
+ 
+ static int __devexit pcf50633_input_remove(struct platform_device *pdev)
+ {
+ 	struct pcf50633_input *input  = platform_get_drvdata(pdev);
+ 
+-	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYR);
+-	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYF);
++	free_irq(input->irq_released, input);
++	free_irq(input->irq_pressed, input);
+ 
+ 	input_unregister_device(input->input_dev);
+ 	kfree(input);
+diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
+index 666daf7..46fac25 100644
+--- a/drivers/leds/leds-pwm.c
++++ b/drivers/leds/leds-pwm.c
+@@ -26,8 +26,8 @@
+ struct led_pwm_data {
+ 	struct led_classdev	cdev;
+ 	struct pwm_device	*pwm;
+-	unsigned int 		active_low;
+-	unsigned int		period;
++	struct led_pwm		*led;
++	struct device		*parent;
+ };
+ 
+ static void led_pwm_set(struct led_classdev *led_cdev,
+@@ -35,8 +35,13 @@ static void led_pwm_set(struct led_classdev *led_cdev,
+ {
+ 	struct led_pwm_data *led_dat =
+ 		container_of(led_cdev, struct led_pwm_data, cdev);
++	struct device *parent = led_dat->parent;
++	struct led_pwm_platform_data *pdata = parent->platform_data;
+ 	unsigned int max = led_dat->cdev.max_brightness;
+-	unsigned int period =  led_dat->period;
++	unsigned int period =  led_dat->led->pwm_period_ns;
++
++	if (pdata->notify)
++	    brightness = pdata->notify(parent, led_dat->led, brightness);
+ 
+ 	if (brightness == 0) {
+ 		pwm_config(led_dat->pwm, 0, period);
+@@ -77,18 +82,28 @@ static int led_pwm_probe(struct platform_device *pdev)
+ 
+ 		led_dat->cdev.name = cur_led->name;
+ 		led_dat->cdev.default_trigger = cur_led->default_trigger;
+-		led_dat->active_low = cur_led->active_low;
+-		led_dat->period = cur_led->pwm_period_ns;
+ 		led_dat->cdev.brightness_set = led_pwm_set;
+ 		led_dat->cdev.brightness = LED_OFF;
+ 		led_dat->cdev.max_brightness = cur_led->max_brightness;
+ 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ 
++		led_dat->led = cur_led;
++		led_dat->parent = &pdev->dev;
++
+ 		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+ 		if (ret < 0) {
+ 			pwm_free(led_dat->pwm);
+ 			goto err;
+ 		}
++
++		if (pdata->init) {
++			ret = pdata->init(&pdev->dev, cur_led);
++			if (ret < 0) {
++				led_classdev_unregister(&led_dat->cdev);
++				pwm_free(led_dat->pwm);
++				goto err;
++			}
++		}
+ 	}
+ 
+ 	platform_set_drvdata(pdev, leds_data);
+@@ -98,6 +113,8 @@ static int led_pwm_probe(struct platform_device *pdev)
+ err:
+ 	if (i > 0) {
+ 		for (i = i - 1; i >= 0; i--) {
++			if (pdata->exit)
++				pdata->exit(&pdev->dev, &pdata->leds[i]);
+ 			led_classdev_unregister(&leds_data[i].cdev);
+ 			pwm_free(leds_data[i].pwm);
+ 		}
+@@ -117,6 +134,8 @@ static int __devexit led_pwm_remove(struct platform_device *pdev)
+ 	leds_data = platform_get_drvdata(pdev);
+ 
+ 	for (i = 0; i < pdata->num_leds; i++) {
++		if (pdata->exit)
++			pdata->exit(&pdev->dev, &pdata->leds[i]);
+ 		led_classdev_unregister(&leds_data[i].cdev);
+ 		pwm_free(leds_data[i].pwm);
+ 	}
+diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
+index 3ed3ff0..9b2b1bb 100644
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -448,6 +448,7 @@ config MFD_WM8994
+ 
+ config MFD_PCF50633
+ 	tristate "Support for NXP PCF50633"
++	select MFD_CORE
+ 	depends on I2C
+ 	help
+ 	  Say yes here if you have NXP PCF50633 chip on your board.
+@@ -477,13 +478,6 @@ config PCF50633_ADC
+ 	 Say yes here if you want to include support for ADC in the
+ 	 NXP PCF50633 chip.
+ 
+-config PCF50633_GPIO
+-	tristate "Support for NXP PCF50633 GPIO"
+-	depends on MFD_PCF50633
+-	help
+-	 Say yes here if you want to include support GPIO for pins on
+-	 the PCF50633 chip.
+-
+ config ABX500_CORE
+ 	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+ 	default y if ARCH_U300 || ARCH_U8500
+@@ -602,6 +596,14 @@ config LPC_SCH
+ 	  LPC bridge function of the Intel SCH provides support for
+ 	  System Management Bus and General Purpose I/O.
+ 
++config MFD_GLAMO
++	bool "Smedia Glamo 336x/337x support"
++	select MFD_CORE
++	help
++	  This enables the core driver for the Smedia Glamo 336x/337x
++	  multi-function device.  It includes irq_chip demultiplex as
++	  well as clock / power management and GPIO support.
++
+ config MFD_RDC321X
+ 	tristate "Support for RDC-R321x southbridge"
+ 	select MFD_CORE
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index 419caa9..fb5f307 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -6,6 +6,8 @@
+ obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
+ obj-$(CONFIG_MFD_SM501)		+= sm501.o
+ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
++obj-$(CONFIG_MFD_SH_MOBILE_SDHI)		+= sh_mobile_sdhi.o
++obj-$(CONFIG_MFD_GLAMO)		+= glamo-core.o
+ 
+ obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
+ obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
+@@ -68,7 +70,6 @@ obj-$(CONFIG_MFD_MAX8998)	+= max8998.o max8998-irq.o
+ pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
+ obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
+ obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
+-obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
+ obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
+ obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
+ obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
+diff --git a/drivers/mfd/glamo-core.c b/drivers/mfd/glamo-core.c
+new file mode 100644
+index 0000000..c9b2ae5
+--- /dev/null
++++ b/drivers/mfd/glamo-core.c
+@@ -0,0 +1,1274 @@
++/* Smedia Glamo 3362 driver
++ *
++ * (C) 2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/kernel_stat.h>
++#include <linux/spinlock.h>
++#include <linux/mfd/core.h>
++#include <linux/mfd/glamo.h>
++#include <linux/mfd/glamo-regs.h>
++#include <linux/mfd/glamo-core.h>
++#include <linux/io.h>
++#include <linux/slab.h>
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++#include <linux/uaccess.h>
++
++#include <linux/pm.h>
++
++#define GLAMO_MEM_REFRESH_COUNT 0x100
++
++#define GLAMO_NR_IRQS 9
++
++#define GLAMO_IRQ_HOSTBUS	0
++#define GLAMO_IRQ_JPEG		1
++#define GLAMO_IRQ_MPEG		2
++#define GLAMO_IRQ_MPROC1	3
++#define GLAMO_IRQ_MPROC0	4
++#define GLAMO_IRQ_CMDQUEUE	5
++#define GLAMO_IRQ_2D		6
++#define GLAMO_IRQ_MMC		7
++#define GLAMO_IRQ_RISC		8
++
++/*
++ * Glamo internal settings
++ *
++ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
++ * above.  Couple of GTA02 users report trouble with memory bus when they
++ * upgraded from 2.6.24.  So this parameter allows reversion to 2.6.24
++ * scheme if their Glamo chip needs it.
++ *
++ * you can override the faster default on kernel commandline using
++ *
++ *   glamo3362.slow_memory=1
++ *
++ * for example
++ */
++
++static int slow_memory;
++module_param(slow_memory, int, 0644);
++
++struct reg_range {
++	int start;
++	int count;
++	char *name;
++	unsigned dump:1;
++};
++
++static const struct reg_range reg_range[] = {
++	{ 0x0000, 0x76,		"General",	1 },
++	{ 0x0200, 0x18,		"Host Bus",	1 },
++	{ 0x0300, 0x38,		"Memory",	1 },
++/*	{ 0x0400, 0x100,	"Sensor",	0 }, */
++/*	{ 0x0500, 0x300,	"ISP",		0 }, */
++/*	{ 0x0800, 0x400,	"JPEG",		0 }, */
++/*	{ 0x0c00, 0xcc,		"MPEG",		0 }, */
++	{ 0x1100, 0xb2,		"LCD 1",	0 },
++	{ 0x1200, 0x64,		"LCD 2",	0 },
++	{ 0x1400, 0x42,		"MMC",		0 },
++/*	{ 0x1500, 0x080,	"MPU 0",	0 },
++	{ 0x1580, 0x080,	"MPU 1",	0 },
++	{ 0x1600, 0x080,	"Cmd Queue",	0 },
++	{ 0x1680, 0x080,	"RISC CPU",	0 },*/
++	{ 0x1700, 0x400,	"2D Unit",	0 },
++/*	{ 0x1b00, 0x900,	"3D Unit",	0 }, */
++};
++
++static inline void __reg_write(struct glamo_core *glamo,
++				uint16_t reg, uint16_t val)
++{
++	writew(val, glamo->base + reg);
++}
++
++void glamo_reg_write(struct glamo_core *glamo,
++				uint16_t reg, uint16_t val)
++{
++	spin_lock(&glamo->lock);
++	__reg_write(glamo, reg, val);
++	spin_unlock(&glamo->lock);
++}
++EXPORT_SYMBOL_GPL(glamo_reg_write);
++
++
++static inline uint16_t __reg_read(struct glamo_core *glamo,
++					uint16_t reg)
++{
++	return readw(glamo->base + reg);
++}
++
++uint16_t glamo_reg_read(struct glamo_core *glamo, uint16_t reg)
++{
++	uint16_t val;
++	spin_lock(&glamo->lock);
++	val = __reg_read(glamo, reg);
++	spin_unlock(&glamo->lock);
++
++	return val;
++}
++EXPORT_SYMBOL_GPL(glamo_reg_read);
++
++static void __reg_set_bit_mask(struct glamo_core *glamo,
++				uint16_t reg, uint16_t mask,
++				uint16_t val)
++{
++	uint16_t tmp;
++
++	val &= mask;
++
++	tmp = __reg_read(glamo, reg);
++	tmp &= ~mask;
++	tmp |= val;
++	__reg_write(glamo, reg, tmp);
++}
++
++static void reg_set_bit_mask(struct glamo_core *glamo,
++				uint16_t reg, uint16_t mask,
++				uint16_t val)
++{
++	spin_lock(&glamo->lock);
++	__reg_set_bit_mask(glamo, reg, mask, val);
++	spin_unlock(&glamo->lock);
++}
++
++static inline void __reg_set_bit(struct glamo_core *glamo,
++				 uint16_t reg, uint16_t bit)
++{
++	uint16_t tmp;
++	tmp = __reg_read(glamo, reg);
++	tmp |= bit;
++	__reg_write(glamo, reg, tmp);
++}
++
++static inline void __reg_clear_bit(struct glamo_core *glamo,
++					uint16_t reg, uint16_t bit)
++{
++	uint16_t tmp;
++	tmp = __reg_read(glamo, reg);
++	tmp &= ~bit;
++	__reg_write(glamo, reg, tmp);
++}
++
++/***********************************************************************
++ * resources of sibling devices
++ ***********************************************************************/
++
++static struct resource glamo_fb_resources[] = {
++	{
++		.name	= "glamo-fb-regs",
++		.start	= GLAMO_REGOFS_LCD,
++		.end	= GLAMO_REGOFS_MMC - 1,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		.name	= "glamo-fb-mem",
++		.start	= GLAMO_OFFSET_FB,
++		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource glamo_mmc_resources[] = {
++	{
++		.name	= "glamo-mmc-regs",
++		.start	= GLAMO_REGOFS_MMC,
++		.end	= GLAMO_REGOFS_MPROC0 - 1,
++		.flags	= IORESOURCE_MEM
++	}, {
++		.name	= "glamo-mmc-mem",
++		.start	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
++		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
++				  GLAMO_MMC_BUFFER_SIZE - 1,
++		.flags	= IORESOURCE_MEM
++	}, {
++		.start	= GLAMO_IRQ_MMC,
++		.end	= GLAMO_IRQ_MMC,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++enum glamo_cells {
++	GLAMO_CELL_FB,
++	GLAMO_CELL_MMC,
++	GLAMO_CELL_GPIO,
++};
++
++static const struct mfd_cell glamo_cells[] = {
++	[GLAMO_CELL_FB] = {
++		.name = "glamo-fb",
++		.num_resources = ARRAY_SIZE(glamo_fb_resources),
++		.resources = glamo_fb_resources,
++	},
++	[GLAMO_CELL_MMC] = {
++		.name = "glamo-mci",
++		.num_resources = ARRAY_SIZE(glamo_mmc_resources),
++		.resources = glamo_mmc_resources,
++	},
++	[GLAMO_CELL_GPIO] = {
++		.name = "glamo-gpio",
++	},
++};
++
++/***********************************************************************
++ * IRQ demultiplexer
++ ***********************************************************************/
++static inline unsigned int glamo_irq_bit(struct glamo_core *glamo,
++	struct irq_data *data)
++{
++	return BIT(data->irq - glamo->irq_base);
++}
++
++static void glamo_ack_irq(struct irq_data *data)
++{
++	struct glamo_core *glamo = irq_data_get_irq_chip_data(data);
++	/* clear interrupt source */
++	__reg_write(glamo, GLAMO_REG_IRQ_CLEAR, glamo_irq_bit(glamo, data));
++}
++
++static void glamo_mask_irq(struct irq_data *data)
++{
++	struct glamo_core *glamo = irq_data_get_irq_chip_data(data);
++
++	/* clear bit in enable register */
++	__reg_clear_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, data));
++}
++
++static void glamo_unmask_irq(struct irq_data *data)
++{
++	struct glamo_core *glamo = irq_data_get_irq_chip_data(data);
++
++	/* set bit in enable register */
++	__reg_set_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, data));
++}
++
++static struct irq_chip glamo_irq_chip = {
++	.name		= "glamo",
++	.irq_ack	= glamo_ack_irq,
++	.irq_mask	= glamo_mask_irq,
++	.irq_unmask	= glamo_unmask_irq,
++};
++
++static irqreturn_t glamo_irq_handler(int irq, void *devid)
++{
++	struct glamo_core *glamo = devid;
++	uint16_t irqstatus;
++	int i;
++
++	irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS);
++	for (i = 0; i < 9; ++i) {
++		if (irqstatus & BIT(i))
++			generic_handle_irq(glamo->irq_base + i);
++	}
++
++	return IRQ_HANDLED;
++}
++
++struct glamo_engine_reg_set {
++	uint16_t reg;
++	uint16_t mask_suspended;
++	uint16_t mask_enabled;
++};
++
++/*
++debugfs
++*/
++
++#ifdef CONFIG_DEBUG_FS
++static ssize_t debugfs_regs_write(struct file *file,
++				  const char __user *user_buf,
++				  size_t count, loff_t *ppos)
++{
++	struct glamo_core *glamo = ((struct seq_file *)file->private_data)->private;
++	char buf[14];
++	unsigned int reg;
++	unsigned int val;
++	int buf_size;
++
++	buf_size = min(count, sizeof(buf) - 1);
++	if (copy_from_user(buf, user_buf, buf_size))
++		return -EFAULT;
++	if (sscanf(buf, "%x %x", &reg, &val) != 2)
++		return -EFAULT;
++
++	dev_info(&glamo->pdev->dev, "reg %#02x <-- %#04x\n", reg, val);
++
++	glamo_reg_write(glamo, reg, val);
++
++	return count;
++}
++
++static int glamo_show_regs(struct seq_file *s, void *pos)
++{
++	struct glamo_core *glamo = s->private;
++	const struct reg_range *rr = reg_range;
++	int i, n;
++
++	spin_lock(&glamo->lock);
++	for (i = 0; i < ARRAY_SIZE(reg_range); ++i, ++rr) {
++		if (!rr->dump)
++			continue;
++		seq_printf(s, "\n%s\n", rr->name);
++		for (n = rr->start; n < rr->start + rr->count; n += 2) {
++			if ((n & 15) == 0)
++				seq_printf(s, "\n%04X:  ", n);
++			seq_printf(s, "%04x ", __reg_read(glamo, n));
++		}
++		seq_printf(s, "\n");
++	}
++	spin_unlock(&glamo->lock);
++
++	return 0;
++}
++
++static int debugfs_open_file(struct inode *inode, struct file *file)
++{
++	return single_open(file, glamo_show_regs, inode->i_private);
++}
++
++static const struct file_operations debugfs_regs_ops = {
++	.open		= debugfs_open_file,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.write		= debugfs_regs_write,
++	.release	= single_release,
++};
++
++static void glamo_init_debugfs(struct glamo_core *glamo)
++{
++	glamo->debugfs_dir = debugfs_create_dir("glamo3362", NULL);
++	if (glamo->debugfs_dir)
++		debugfs_create_file("regs", S_IRUGO | S_IWUSR,
++				    glamo->debugfs_dir,
++				    glamo, &debugfs_regs_ops);
++	else
++		dev_warn(&glamo->pdev->dev, "Failed to set up debugfs.\n");
++}
++
++static void glamo_exit_debugfs(struct glamo_core *glamo)
++{
++	if (glamo->debugfs_dir)
++		debugfs_remove_recursive(glamo->debugfs_dir);
++}
++#else
++static void glamo_init_debugfs(struct glamo_core *glamo)
++{
++}
++
++static void glamo_exit_debugfs(struct glamo_core *glamo)
++{
++}
++#endif
++
++struct glamo_engine_desc {
++	const char *name;
++	uint16_t hostbus;
++	const struct glamo_engine_reg_set *regs;
++	size_t num_regs;
++};
++
++static const struct glamo_engine_reg_set glamo_lcd_regs[] = {
++	{ GLAMO_REG_CLOCK_LCD,
++	GLAMO_CLOCK_LCD_EN_M5CLK |
++	GLAMO_CLOCK_LCD_DG_M5CLK |
++	GLAMO_CLOCK_LCD_EN_DMCLK,
++
++	GLAMO_CLOCK_LCD_EN_DHCLK |
++	GLAMO_CLOCK_LCD_EN_DCLK
++	},
++	{ GLAMO_REG_CLOCK_GEN5_1,
++	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK,
++
++	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
++	GLAMO_CLOCK_GEN51_EN_DIV_DCLK
++	}
++};
++
++static const struct glamo_engine_reg_set glamo_mmc_regs[] = {
++	{ GLAMO_REG_CLOCK_MMC,
++	GLAMO_CLOCK_MMC_EN_M9CLK |
++	GLAMO_CLOCK_MMC_DG_M9CLK,
++
++	GLAMO_CLOCK_MMC_EN_TCLK |
++	GLAMO_CLOCK_MMC_DG_TCLK
++	},
++	{ GLAMO_REG_CLOCK_GEN5_1,
++	0,
++	GLAMO_CLOCK_GEN51_EN_DIV_TCLK
++	}
++};
++
++static const struct glamo_engine_reg_set glamo_2d_regs[] = {
++	{ GLAMO_REG_CLOCK_2D,
++	GLAMO_CLOCK_2D_EN_M7CLK |
++	GLAMO_CLOCK_2D_DG_M7CLK,
++
++	GLAMO_CLOCK_2D_EN_GCLK |
++	GLAMO_CLOCK_2D_DG_GCLK
++	},
++	{ GLAMO_REG_CLOCK_GEN5_1,
++	0,
++	GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
++	}
++};
++
++static const struct glamo_engine_reg_set glamo_cmdq_regs[] = {
++	{ GLAMO_REG_CLOCK_2D,
++	GLAMO_CLOCK_2D_EN_M6CLK,
++	0
++	},
++};
++
++#define GLAMO_ENGINE(xname, xhostbus, xregs) { \
++	.name = xname, \
++	.hostbus = xhostbus, \
++	.num_regs = ARRAY_SIZE(xregs), \
++	.regs = xregs, \
++}
++
++static const struct glamo_engine_desc glamo_engines[] = {
++	[GLAMO_ENGINE_LCD] = GLAMO_ENGINE("LCD", GLAMO_HOSTBUS2_MMIO_EN_LCD,
++					glamo_lcd_regs),
++	[GLAMO_ENGINE_MMC] = GLAMO_ENGINE("MMC", GLAMO_HOSTBUS2_MMIO_EN_MMC,
++					glamo_mmc_regs),
++	[GLAMO_ENGINE_2D] = GLAMO_ENGINE("2D", GLAMO_HOSTBUS2_MMIO_EN_2D,
++					glamo_2d_regs),
++	[GLAMO_ENGINE_CMDQ] = GLAMO_ENGINE("CMDQ", GLAMO_HOSTBUS2_MMIO_EN_CQ,
++					glamo_cmdq_regs),
++};
++
++static inline const char *glamo_engine_name(enum glamo_engine engine)
++{
++	return glamo_engines[engine].name;
++}
++
++/***********************************************************************
++ * 'engine' support
++ ***********************************************************************/
++
++int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int i;
++	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
++	const struct glamo_engine_reg_set *reg;
++
++	switch (engine) {
++	case GLAMO_ENGINE_LCD:
++	case GLAMO_ENGINE_MMC:
++	case GLAMO_ENGINE_2D:
++	case GLAMO_ENGINE_CMDQ:
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	reg = engine_desc->regs;
++
++	__reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
++			engine_desc->hostbus);
++	for (i = engine_desc->num_regs; i; --i, ++reg)
++		__reg_set_bit(glamo, reg->reg,
++				reg->mask_suspended | reg->mask_enabled);
++
++	return 0;
++}
++
++int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int ret = 0;
++
++	spin_lock(&glamo->lock);
++
++	if (glamo->engine_state[engine] != GLAMO_ENGINE_ENABLED) {
++		ret = __glamo_engine_enable(glamo, engine);
++		if (!ret)
++			glamo->engine_state[engine] = GLAMO_ENGINE_ENABLED;
++	}
++
++	spin_unlock(&glamo->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_enable);
++
++int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int i;
++	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
++	const struct glamo_engine_reg_set *reg;
++
++	switch (engine) {
++	case GLAMO_ENGINE_LCD:
++	case GLAMO_ENGINE_MMC:
++	case GLAMO_ENGINE_2D:
++	case GLAMO_ENGINE_CMDQ:
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	reg = engine_desc->regs;
++
++	__reg_clear_bit(glamo, GLAMO_REG_HOSTBUS(2),
++			engine_desc->hostbus);
++	for (i = engine_desc->num_regs; i; --i, ++reg)
++		__reg_clear_bit(glamo, reg->reg,
++				reg->mask_suspended | reg->mask_enabled);
++
++	return 0;
++}
++int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int ret = 0;
++
++	spin_lock(&glamo->lock);
++
++	if (glamo->engine_state[engine] != GLAMO_ENGINE_DISABLED) {
++		ret = __glamo_engine_disable(glamo, engine);
++		if (!ret)
++			glamo->engine_state[engine] = GLAMO_ENGINE_DISABLED;
++	}
++
++	spin_unlock(&glamo->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_disable);
++
++int __glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int i;
++	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
++	const struct glamo_engine_reg_set *reg;
++
++	switch (engine) {
++	case GLAMO_ENGINE_LCD:
++	case GLAMO_ENGINE_MMC:
++	case GLAMO_ENGINE_2D:
++	case GLAMO_ENGINE_CMDQ:
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	reg = engine_desc->regs;
++
++	__reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
++			engine_desc->hostbus);
++	for (i = engine_desc->num_regs; i; --i, ++reg) {
++		__reg_set_bit(glamo, reg->reg, reg->mask_suspended);
++		__reg_clear_bit(glamo, reg->reg, reg->mask_enabled);
++	}
++
++	return 0;
++}
++
++int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	int ret = 0;
++
++	spin_lock(&glamo->lock);
++
++	if (glamo->engine_state[engine] != GLAMO_ENGINE_SUSPENDED) {
++		ret = __glamo_engine_suspend(glamo, engine);
++		if (!ret)
++			glamo->engine_state[engine] = GLAMO_ENGINE_SUSPENDED;
++	}
++
++	spin_unlock(&glamo->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_suspend);
++
++static const struct glamo_script reset_regs[] = {
++	[GLAMO_ENGINE_LCD] = {
++		GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
++	},
++	[GLAMO_ENGINE_MMC] = {
++		GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
++	},
++	[GLAMO_ENGINE_CMDQ] = {
++		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET
++	},
++	[GLAMO_ENGINE_2D] = {
++		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
++	},
++	[GLAMO_ENGINE_JPEG] = {
++		GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
++	},
++};
++
++void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
++{
++	uint16_t reg = reset_regs[engine].reg;
++	uint16_t val = reset_regs[engine].val;
++
++	if (engine >= ARRAY_SIZE(reset_regs)) {
++		dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
++		return;
++	}
++
++	spin_lock(&glamo->lock);
++	__reg_set_bit(glamo, reg, val);
++	__reg_clear_bit(glamo, reg, val);
++	spin_unlock(&glamo->lock);
++}
++EXPORT_SYMBOL_GPL(glamo_engine_reset);
++
++int glamo_pll_rate(struct glamo_core *glamo,
++			  enum glamo_pll pll)
++{
++	uint16_t reg;
++	unsigned int osci = glamo->pdata->osci_clock_rate;
++
++	switch (pll) {
++	case GLAMO_PLL1:
++		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
++		break;
++	case GLAMO_PLL2:
++		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return (int)osci * (int)reg;
++}
++EXPORT_SYMBOL_GPL(glamo_pll_rate);
++
++int glamo_engine_reclock(struct glamo_core *glamo,
++			 enum glamo_engine engine,
++			 int hz)
++{
++	int pll;
++	uint16_t reg, mask, div;
++
++	if (!hz)
++		return -EINVAL;
++
++	switch (engine) {
++	case GLAMO_ENGINE_LCD:
++		pll = GLAMO_PLL1;
++		reg = GLAMO_REG_CLOCK_GEN7;
++		mask = 0xff;
++		break;
++	case GLAMO_ENGINE_MMC:
++		pll = GLAMO_PLL1;
++		reg = GLAMO_REG_CLOCK_GEN8;
++		mask = 0xff;
++		break;
++	default:
++		dev_warn(&glamo->pdev->dev,
++			 "reclock of engine 0x%x not supported\n", engine);
++		return -EINVAL;
++		break;
++	}
++
++	pll = glamo_pll_rate(glamo, pll);
++
++	div = pll / hz;
++
++	if (div != 0 && pll / div <= hz)
++		--div;
++
++	if (div > mask)
++		div = mask;
++
++	dev_dbg(&glamo->pdev->dev,
++			"PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
++
++	reg_set_bit_mask(glamo, reg, mask, div);
++	mdelay(5); /* wait some time to stabilize */
++
++	return pll / (div + 1);
++}
++EXPORT_SYMBOL_GPL(glamo_engine_reclock);
++
++/***********************************************************************
++ * script support
++ ***********************************************************************/
++
++#define GLAMO_SCRIPT_END	0xffff
++#define GLAMO_SCRIPT_WAIT	0xfffe
++#define GLAMO_SCRIPT_LOCK_PLL	0xfffd
++
++/*
++ * couple of people reported artefacts with 2.6.28 changes, this
++ * allows reversion to 2.6.24 settings
++*/
++static const uint16_t reg_0x200[] = {
++	0xe03, /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
++	0xef0, /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
++	0xea0, /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
++	0xe50, /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
++	0xe00, /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
++	0xef3, /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
++	0xea3, /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
++	0xe53, /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
++};
++
++static int glamo_run_script(struct glamo_core *glamo,
++				const struct glamo_script *script, int len,
++				int may_sleep)
++{
++	int i;
++	uint16_t status;
++	const struct glamo_script *line = script;
++
++	for (i = 0; i < len; ++i, ++line) {
++		switch (line->reg) {
++		case GLAMO_SCRIPT_END:
++			return 0;
++		case GLAMO_SCRIPT_WAIT:
++			if (may_sleep)
++				msleep(line->val);
++			else
++				mdelay(line->val * 4);
++			break;
++		case GLAMO_SCRIPT_LOCK_PLL:
++			/* spin until PLLs lock */
++			do {
++				status = __reg_read(glamo, GLAMO_REG_PLL_GEN5);
++			} while ((status & 3) != 3);
++			break;
++		case 0x200:
++			__reg_write(glamo, line->reg,
++					reg_0x200[slow_memory & 0x7]);
++			break;
++		default:
++			__reg_write(glamo, line->reg, line->val);
++			break;
++		}
++	}
++
++	return 0;
++}
++
++static const struct glamo_script glamo_init_script[] = {
++	{ GLAMO_REG_CLOCK_HOST,		0x1000 },
++	{ GLAMO_SCRIPT_WAIT,		     2 },
++	{ GLAMO_REG_CLOCK_MEMORY,	0x1000 },
++	{ GLAMO_REG_CLOCK_MEMORY,	0x2000 },
++	{ GLAMO_REG_CLOCK_LCD,		0x1000 },
++	{ GLAMO_REG_CLOCK_MMC,		0x1000 },
++	{ GLAMO_REG_CLOCK_ISP,		0x1000 },
++	{ GLAMO_REG_CLOCK_ISP,		0x3000 },
++	{ GLAMO_REG_CLOCK_JPEG,		0x1000 },
++	{ GLAMO_REG_CLOCK_3D,		0x1000 },
++	{ GLAMO_REG_CLOCK_3D,		0x3000 },
++	{ GLAMO_REG_CLOCK_2D,		0x1000 },
++	{ GLAMO_REG_CLOCK_2D,		0x3000 },
++	{ GLAMO_REG_CLOCK_RISC1,	0x1000 },
++	{ GLAMO_REG_CLOCK_MPEG,		0x1000 },
++	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
++	{ GLAMO_REG_CLOCK_MPROC,	0x1000 /*0x100f*/ },
++	{ GLAMO_SCRIPT_WAIT,		     2 },
++	{ GLAMO_REG_CLOCK_HOST,		0x0000 },
++	{ GLAMO_REG_CLOCK_MEMORY,	0x0000 },
++	{ GLAMO_REG_CLOCK_LCD,		0x0000 },
++	{ GLAMO_REG_CLOCK_MMC,		0x0000 },
++	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
++	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
++	{ GLAMO_SCRIPT_LOCK_PLL, 0 },
++	/*
++	 * b9 of this register MUST be zero to get any interrupts on INT#
++	 * the other set bits enable all the engine interrupt sources
++	 */
++	{ GLAMO_REG_IRQ_ENABLE,		0x0100 },
++	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
++	{ GLAMO_REG_CLOCK_GEN7,		0x0101 },
++	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
++	{ GLAMO_REG_CLOCK_HOST,		0x000d },
++	/*
++	 * b7..b4 = 0 = no wait states on read or write
++	 * b0 = 1 select PLL2 for Host interface, b1 = enable it
++	 */
++	{ GLAMO_REG_HOSTBUS(1),		0x0e03 /* this is replaced by script parser */ },
++	{ GLAMO_REG_HOSTBUS(2),		0x07ff }, /* TODO: Disable all */
++	{ GLAMO_REG_HOSTBUS(10),	0x0000 },
++	{ GLAMO_REG_HOSTBUS(11),	0x4000 },
++	{ GLAMO_REG_HOSTBUS(12),	0xf00e },
++
++	/* S-Media recommended "set tiling mode to 512 mode for memory access
++	 * more efficiency when 640x480" */
++	{ GLAMO_REG_MEM_TYPE,		0x0c74 }, /* 8MB, 16 word pg wr+rd */
++	{ GLAMO_REG_MEM_GEN,		0xafaf }, /* 63 grants min + max */
++
++	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
++	{ GLAMO_REG_MEM_TIMING2,	0x0010 }, /* Taa = 3 MCLK */
++	{ GLAMO_REG_MEM_TIMING3,	0x0000 },
++	{ GLAMO_REG_MEM_TIMING4,	0x0000 }, /* CE1# delay fall/rise */
++	{ GLAMO_REG_MEM_TIMING5,	0x0000 }, /* UB# LB# */
++	{ GLAMO_REG_MEM_TIMING6,	0x0000 }, /* OE# */
++	{ GLAMO_REG_MEM_TIMING7,	0x0000 }, /* WE# */
++	{ GLAMO_REG_MEM_TIMING8,	0x1002 }, /* MCLK delay, was 0x1000 */
++	{ GLAMO_REG_MEM_TIMING9,	0x6006 },
++	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
++	{ GLAMO_REG_MEM_TIMING11,	0x0001 },
++	{ GLAMO_REG_MEM_POWER1,		0x0020 },
++	{ GLAMO_REG_MEM_POWER2,		0x0000 },
++	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
++	{ GLAMO_SCRIPT_WAIT,		     1 },
++	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
++	{ GLAMO_SCRIPT_WAIT,		     1 },
++	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
++	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
++	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
++};
++
++/* Find out if we can support this version of the Glamo chip */
++static int __devinit glamo_supported(struct glamo_core *glamo)
++{
++	uint16_t dev_id, rev_id;
++
++	dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
++	rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
++
++	switch (dev_id) {
++	case 0x3650:
++		switch (rev_id) {
++		case GLAMO_CORE_REV_A2:
++			break;
++		case GLAMO_CORE_REV_A0:
++		case GLAMO_CORE_REV_A1:
++		case GLAMO_CORE_REV_A3:
++			dev_warn(&glamo->pdev->dev, "untested core revision "
++				 "%04x, your mileage may vary\n", rev_id);
++			break;
++		default:
++			dev_warn(&glamo->pdev->dev, "unknown glamo revision "
++				 "%04x, your mileage may vary\n", rev_id);
++		}
++		break;
++	default:
++		dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
++			dev_id);
++		return 0;
++	}
++
++	dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
++		 "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
++		 glamo_pll_rate(glamo, GLAMO_PLL1),
++		 glamo_pll_rate(glamo, GLAMO_PLL2));
++
++	return 1;
++}
++
++static int __devinit glamo_probe(struct platform_device *pdev)
++{
++	int ret = 0, n, irq, irq_base;
++	struct glamo_core *glamo;
++	struct resource *mem;
++
++	glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
++	if (!glamo)
++		return -ENOMEM;
++
++	for (n = 0; n < __NUM_GLAMO_ENGINES; n++)
++		glamo->engine_state[n] = GLAMO_ENGINE_DISABLED;
++
++	spin_lock_init(&glamo->lock);
++
++	glamo->pdev = pdev;
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	glamo->irq = platform_get_irq(pdev, 0);
++	glamo->pdata = pdev->dev.platform_data;
++
++	if (glamo->irq < 0) {
++		ret = glamo->irq;
++		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
++		goto err_free;
++	}
++
++	if (!mem) {
++		dev_err(&pdev->dev, "Failed to get platform memory\n");
++		ret = -ENOENT;
++		goto err_free;
++	}
++
++	if (!glamo->pdata) {
++		dev_err(&pdev->dev, "Missing platform data\n");
++		ret = -ENOENT;
++		goto err_free;
++	}
++
++	irq_base = irq_alloc_descs(-1, 0, GLAMO_NR_IRQS, 0);
++	if (irq_base < 0) {
++		dev_err(&pdev->dev, "Failed to allocate irqs: %d\n", irq_base);
++		goto err_free;
++	}
++	glamo->irq_base = irq_base;
++
++
++	/* only request the generic, hostbus and memory controller registers */
++	glamo->mem = request_mem_region(mem->start, GLAMO_REGOFS_VIDCAP,
++					pdev->name);
++
++	if (!glamo->mem) {
++		dev_err(&pdev->dev, "Failed to request io memory region\n");
++		ret = -ENOENT;
++		goto err_irq_free_descs;
++	}
++
++	glamo->base = ioremap(glamo->mem->start, resource_size(glamo->mem));
++	if (!glamo->base) {
++		dev_err(&pdev->dev, "Failed to ioremap() memory region\n");
++		goto err_release_mem_region;
++	}
++
++	/* confirm it isn't insane version */
++	if (!glamo_supported(glamo)) {
++		dev_err(&pdev->dev,
++			"This version of the Glamo is not supported\n");
++		goto err_iounmap;
++	}
++
++	platform_set_drvdata(pdev, glamo);
++
++	/* debugfs */
++	glamo_init_debugfs(glamo);
++
++	/* init the chip with canned register set */
++	glamo_run_script(glamo, glamo_init_script,
++			 ARRAY_SIZE(glamo_init_script), 1);
++
++	/*
++	 * finally set the mfd interrupts up
++	 */
++	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
++#ifdef CONFIG_ARM
++		set_irq_flags(irq, IRQF_VALID);
++#else
++		irq_set_noprobe(irq);
++#endif
++		irq_set_chip_data(irq, glamo);
++		irq_set_chip_and_handler(irq, &glamo_irq_chip,
++					handle_level_irq);
++	}
++
++	ret = request_any_context_irq(glamo->irq, glamo_irq_handler,
++				IRQF_TRIGGER_FALLING, "glamo irq demux", glamo);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
++		goto err_free_irqs;
++	}
++
++	ret = mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
++				ARRAY_SIZE(glamo_cells), mem, glamo->irq_base);
++
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
++		goto err_free_irq;
++	}
++
++	dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
++		 glamo_pll_rate(glamo, GLAMO_PLL1),
++		 glamo_pll_rate(glamo, GLAMO_PLL2));
++
++	return 0;
++
++err_free_irq:
++	free_irq(glamo->irq, glamo);
++err_free_irqs:
++	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
++		irq_set_chip(irq, NULL);
++#ifdef CONFIG_ARM
++		set_irq_flags(irq, 0);
++#else
++		irq_set_probe(irq);
++#endif
++		irq_set_chip_data(irq, NULL);
++	}
++err_iounmap:
++	iounmap(glamo->base);
++err_release_mem_region:
++	release_mem_region(glamo->mem->start, resource_size(glamo->mem));
++err_irq_free_descs:
++	irq_free_descs(irq_base, GLAMO_NR_IRQS);
++err_free:
++	platform_set_drvdata(pdev, NULL);
++	kfree(glamo);
++
++	return ret;
++}
++
++static int __devexit glamo_remove(struct platform_device *pdev)
++{
++	struct glamo_core *glamo = platform_get_drvdata(pdev);
++	int irq;
++	int irq_base = glamo->irq_base;
++
++	glamo_exit_debugfs(glamo);
++
++	mfd_remove_devices(&pdev->dev);
++
++	free_irq(glamo->irq, glamo);
++
++	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
++#ifdef CONFIG_ARM
++		set_irq_flags(irq, 0);
++#else
++		irq_set_noprobe();
++#endif
++		irq_set_chip(irq, NULL);
++		irq_set_chip_data(irq, NULL);
++	}
++
++	platform_set_drvdata(pdev, NULL);
++	iounmap(glamo->base);
++	release_mem_region(glamo->mem->start, resource_size(glamo->mem));
++	irq_free_descs(irq_base, GLAMO_NR_IRQS);
++	kfree(glamo);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++#if 0
++static struct glamo_script glamo_resume_script[] = {
++
++	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
++	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
++	{ GLAMO_REG_DFT_GEN6, 1 },
++		{ 0xfffe, 100 },
++		{ 0xfffd, 0 },
++	{ 0x200,	0x0e03 },
++
++	/*
++	 * b9 of this register MUST be zero to get any interrupts on INT#
++	 * the other set bits enable all the engine interrupt sources
++	 */
++	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
++	{ GLAMO_REG_CLOCK_HOST,		0x0018 },
++	{ GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
++
++	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
++		{ 0xfffe, 1 },
++	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
++		{ 0xfffe, 1 },
++	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
++	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
++	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
++};
++#endif
++
++#if 0
++static void glamo_power(struct glamo_core *glamo)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&glamo->lock, flags);
++
++	/*
++Power management
++static const REG_VALUE_MASK_TYPE reg_powerOn[] =
++{
++	{ REG_GEN_DFT6,	    REG_BIT_ALL,    REG_DATA(1u << 0)		},
++	{ REG_GEN_PLL3,	    0u,		    REG_DATA(1u << 13)		},
++	{ REG_GEN_MEM_CLK,  REG_BIT_ALL,    REG_BIT_EN_MOCACLK		},
++	{ REG_MEM_DRAM2,    0u,		    REG_BIT_EN_DEEP_POWER_DOWN	},
++	{ REG_MEM_DRAM1,    0u,		    REG_BIT_SELF_REFRESH	}
++};
++
++static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
++{
++	{ REG_MEM_DRAM1,    REG_BIT_ALL,    REG_BIT_SELF_REFRESH    },
++	{ REG_GEN_MEM_CLK,  0u,		    REG_BIT_EN_MOCACLK	    },
++	{ REG_GEN_PLL3,	    REG_BIT_ALL,    REG_DATA(1u << 13)	    },
++	{ REG_GEN_DFT5,	    REG_BIT_ALL,    REG_DATA(1u << 0)	    }
++};
++
++static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
++{
++	{ REG_MEM_DRAM2,    REG_BIT_ALL,    REG_BIT_EN_DEEP_POWER_DOWN  },
++	{ REG_GEN_MEM_CLK,  0u,		    REG_BIT_EN_MOCACLK		},
++	{ REG_GEN_PLL3,	    REG_BIT_ALL,    REG_DATA(1u << 13)		},
++	{ REG_GEN_DFT5,	    REG_BIT_ALL,    REG_DATA(1u << 0)		}
++};
++*/
++	switch (new_state) {
++	case GLAMO_POWER_ON:
++
++		/*
++		 * glamo state on resume is nondeterministic in some
++		 * fundamental way, it has also been observed that the
++		 * Glamo reset pin can get asserted by, eg, touching it with
++		 * a scope probe.  So the only answer is to roll with it and
++		 * force an external reset on the Glamo during resume.
++		 */
++
++
++		break;
++
++	case GLAMO_POWER_SUSPEND:
++
++		break;
++	}
++	spin_unlock_irqrestore(&glamo->lock, flags);
++}
++#endif
++
++static int glamo_suspend(struct device *dev)
++{
++	struct glamo_core *glamo = dev_get_drvdata(dev);
++	int n;
++
++	spin_lock(&glamo->lock);
++
++	glamo->saved_irq_mask = __reg_read(glamo, GLAMO_REG_IRQ_ENABLE);
++
++	/* nuke interrupts */
++	__reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
++
++	/* take down each engine before we kill mem and pll */
++	for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
++		if (glamo->engine_state[n] != GLAMO_ENGINE_DISABLED)
++			__glamo_engine_disable(glamo, n);
++	}
++
++	/* enable self-refresh */
++
++	__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
++				GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
++				GLAMO_MEM_DRAM1_EN_GATE_CKE |
++				GLAMO_MEM_DRAM1_SELF_REFRESH |
++				GLAMO_MEM_REFRESH_COUNT);
++	__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
++				GLAMO_MEM_DRAM1_EN_MODEREG_SET |
++				GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
++				GLAMO_MEM_DRAM1_EN_GATE_CKE |
++				GLAMO_MEM_DRAM1_SELF_REFRESH |
++				GLAMO_MEM_REFRESH_COUNT);
++
++	/* force RAM into deep powerdown */
++	__reg_write(glamo, GLAMO_REG_MEM_DRAM2,
++				GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
++				(7 << 6) | /* tRC */
++				(1 << 4) | /* tRP */
++				(1 << 2) | /* tRCD */
++				2); /* CAS latency */
++
++	/* disable clocks to memory */
++	__reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
++
++	/* all dividers from OSCI */
++	__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
++
++	/* PLL2 into bypass */
++	__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
++
++	__reg_write(glamo, GLAMO_BASIC_MMC_EN_TCLK_DLYA1, 0x0e00);
++
++	/* kill PLLS 1 then 2 */
++	__reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
++	__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
++
++	spin_unlock(&glamo->lock);
++
++	return 0;
++}
++
++static int glamo_resume(struct device *dev)
++{
++	struct glamo_core *glamo = dev_get_drvdata(dev);
++	int n;
++
++	(glamo->pdata->glamo_external_reset)(0);
++	udelay(10);
++	(glamo->pdata->glamo_external_reset)(1);
++	mdelay(5);
++
++	spin_lock(&glamo->lock);
++
++	glamo_run_script(glamo, glamo_init_script,
++			 ARRAY_SIZE(glamo_init_script), 0);
++
++
++	for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
++		switch (glamo->engine_state[n]) {
++		case GLAMO_ENGINE_SUSPENDED:
++			__glamo_engine_suspend(glamo, n);
++			break;
++		case GLAMO_ENGINE_ENABLED:
++			__glamo_engine_enable(glamo, n);
++			break;
++		default:
++			break;
++		}
++	}
++
++	__reg_write(glamo, GLAMO_REG_IRQ_ENABLE, glamo->saved_irq_mask);
++
++	spin_unlock(&glamo->lock);
++
++	return 0;
++}
++
++static const struct dev_pm_ops glamo_pm_ops = {
++	.suspend    = glamo_suspend,
++	.resume     = glamo_resume,
++	.poweroff   = glamo_suspend,
++	.restore    = glamo_resume,
++};
++
++#define GLAMO_PM_OPS (&glamo_pm_ops)
++
++#else
++#define GLAMO_PM_OPS NULL
++#endif
++
++static struct platform_driver glamo_driver = {
++	.probe		= glamo_probe,
++	.remove		= __devexit_p(glamo_remove),
++	.driver		= {
++		.name	= "glamo3362",
++		.owner	= THIS_MODULE,
++		.pm	= GLAMO_PM_OPS,
++	},
++};
++
++static int __init glamo_init(void)
++{
++	return platform_driver_register(&glamo_driver);
++}
++module_init(glamo_init);
++
++static void __exit glamo_exit(void)
++{
++	platform_driver_unregister(&glamo_driver);
++}
++module_exit(glamo_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("Smedia Glamo 3362 core/resource driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:glamo3362");
+diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
+index aed0d2a..54a78c1 100644
+--- a/drivers/mfd/pcf50633-adc.c
++++ b/drivers/mfd/pcf50633-adc.c
+@@ -24,6 +24,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/completion.h>
+ 
++#include <linux/interrupt.h>
++
+ #include <linux/mfd/pcf50633/core.h>
+ #include <linux/mfd/pcf50633/adc.h>
+ 
+@@ -49,13 +51,9 @@ struct pcf50633_adc {
+ 	int queue_head;
+ 	int queue_tail;
+ 	struct mutex queue_mutex;
++	int irq;
+ };
+ 
+-static inline struct pcf50633_adc *__to_adc(struct pcf50633 *pcf)
+-{
+-	return platform_get_drvdata(pcf->adc_pdev);
+-}
+-
+ static void adc_setup(struct pcf50633 *pcf, int channel, int avg)
+ {
+ 	channel &= PCF50633_ADCC1_ADCMUX_MASK;
+@@ -71,7 +69,7 @@ static void adc_setup(struct pcf50633 *pcf, int channel, int avg)
+ 
+ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
+ {
+-	struct pcf50633_adc *adc = __to_adc(pcf);
++	struct pcf50633_adc *adc = pcf->adc;
+ 	int head;
+ 
+ 	head = adc->queue_head;
+@@ -85,7 +83,7 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
+ static int
+ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
+ {
+-	struct pcf50633_adc *adc = __to_adc(pcf);
++	struct pcf50633_adc *adc = pcf->adc;
+ 	int head, tail;
+ 
+ 	mutex_lock(&adc->queue_mutex);
+@@ -170,7 +168,7 @@ static int adc_result(struct pcf50633 *pcf)
+ 	return result;
+ }
+ 
+-static void pcf50633_adc_irq(int irq, void *data)
++static irqreturn_t pcf50633_adc_irq(int irq, void *data)
+ {
+ 	struct pcf50633_adc *adc = data;
+ 	struct pcf50633 *pcf = adc->pcf;
+@@ -184,7 +182,7 @@ static void pcf50633_adc_irq(int irq, void *data)
+ 	if (WARN_ON(!req)) {
+ 		dev_err(pcf->dev, "pcf50633-adc irq: ADC queue empty!\n");
+ 		mutex_unlock(&adc->queue_mutex);
+-		return;
++		return IRQ_HANDLED;
+ 	}
+ 	adc->queue[head] = NULL;
+ 	adc->queue_head = (head + 1) &
+@@ -197,25 +195,49 @@ static void pcf50633_adc_irq(int irq, void *data)
+ 
+ 	req->callback(pcf, req->callback_param, res);
+ 	kfree(req);
++
++	return IRQ_HANDLED;
+ }
+ 
+ static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
+ {
++	struct pcf50633 *pcf = dev_to_pcf50633(pdev->dev.parent);
+ 	struct pcf50633_adc *adc;
++	int irq;
++	int ret;
+ 
+ 	adc = kzalloc(sizeof(*adc), GFP_KERNEL);
+ 	if (!adc)
+ 		return -ENOMEM;
+ 
+-	adc->pcf = dev_to_pcf50633(pdev->dev.parent);
++	adc->pcf = pcf;
+ 	platform_set_drvdata(pdev, adc);
+ 
+-	pcf50633_register_irq(adc->pcf, PCF50633_IRQ_ADCRDY,
+-					pcf50633_adc_irq, adc);
++	irq = platform_get_irq(pdev, 0);
++	if (irq <= 0) {
++		ret = irq;
++		dev_err(&pdev->dev, "Failed to get irq: %d\n", ret);
++		goto err_free;
++	}
+ 
+ 	mutex_init(&adc->queue_mutex);
+ 
++	ret = request_threaded_irq(irq, NULL, pcf50633_adc_irq, 0,
++				dev_name(&pdev->dev), adc);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
++		goto err_free;
++	}
++
++	adc->irq = irq;
++
++	pcf->adc = adc;
++
+ 	return 0;
++
++err_free:
++	kfree(adc);
++	return ret;
+ }
+ 
+ static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
+@@ -223,7 +245,9 @@ static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
+ 	struct pcf50633_adc *adc = platform_get_drvdata(pdev);
+ 	int i, head;
+ 
+-	pcf50633_free_irq(adc->pcf, PCF50633_IRQ_ADCRDY);
++	adc->pcf->adc = NULL;
++
++	free_irq(adc->irq, adc);
+ 
+ 	mutex_lock(&adc->queue_mutex);
+ 	head = adc->queue_head;
+diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
+index 57868416..165a3f3 100644
+--- a/drivers/mfd/pcf50633-core.c
++++ b/drivers/mfd/pcf50633-core.c
+@@ -24,6 +24,8 @@
+ #include <linux/pm.h>
+ #include <linux/slab.h>
+ 
++#include <linux/mfd/core.h>
++
+ #include <linux/mfd/pcf50633/core.h>
+ 
+ static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+@@ -51,7 +53,7 @@ static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+ 
+ }
+ 
+-/* Read a block of up to 32 regs  */
++/* Read a block of upto 32 regs  */
+ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
+ 					int nr_regs, u8 *data)
+ {
+@@ -65,7 +67,7 @@ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
+ }
+ EXPORT_SYMBOL_GPL(pcf50633_read_block);
+ 
+-/* Write a block of up to 32 regs  */
++/* Write a block of upto 32 regs  */
+ int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
+ 					int nr_regs, u8 *data)
+ {
+@@ -209,27 +211,6 @@ static struct attribute_group pcf_attr_group = {
+ 	.attrs	= pcf_sysfs_entries,
+ };
+ 
+-static void
+-pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
+-						struct platform_device **pdev)
+-{
+-	int ret;
+-
+-	*pdev = platform_device_alloc(name, -1);
+-	if (!*pdev) {
+-		dev_err(pcf->dev, "Falied to allocate %s\n", name);
+-		return;
+-	}
+-
+-	(*pdev)->dev.parent = pcf->dev;
+-
+-	ret = platform_device_add(*pdev);
+-	if (ret) {
+-		dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
+-		platform_device_put(*pdev);
+-		*pdev = NULL;
+-	}
+-}
+ 
+ #ifdef CONFIG_PM_SLEEP
+ static int pcf50633_suspend(struct device *dev)
+@@ -251,12 +232,166 @@ static int pcf50633_resume(struct device *dev)
+ 
+ static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
+ 
++#define PCF50633_CELL(_name) \
++	{ \
++		.name = _name, \
++		.id = -1, \
++	} \
++
++#define PCF50633_CELL_RESOURCES(_name, _resources) \
++	{ \
++		.name = _name, \
++		.num_resources = ARRAY_SIZE(_resources), \
++		.resources = _resources, \
++		.id = -1, \
++	} \
++
++#define PCF50633_CELL_ID(_name, _id) \
++	{ \
++		.name = _name, \
++		.id = _id, \
++	} \
++
++static struct resource pcf50633_adc_resources[] = {
++	{
++		.start = PCF50633_IRQ_ADCRDY,
++		.end = PCF50633_IRQ_ADCRDY,
++		.flags = IORESOURCE_IRQ,
++		.name = "ADCRDY",
++	}
++};
++
++static struct resource pcf50633_input_resources[] = {
++	{
++		.start = PCF50633_IRQ_ONKEYR,
++		.end = PCF50633_IRQ_ONKEYR,
++		.flags = IORESOURCE_IRQ,
++		.name = "ONKEYR",
++	},
++	{
++		.start = PCF50633_IRQ_ONKEYF,
++		.end = PCF50633_IRQ_ONKEYF,
++		.flags = IORESOURCE_IRQ,
++		.name = "ONKEYF",
++	}
++};
++
++static struct resource pcf50633_rtc_resources[] = {
++	{
++		.start = PCF50633_IRQ_ALARM,
++		.end = PCF50633_IRQ_ALARM,
++		.flags = IORESOURCE_IRQ,
++		.name = "ALARM",
++	},
++	{
++		.start = PCF50633_IRQ_SECOND,
++		.end = PCF50633_IRQ_SECOND,
++		.flags = IORESOURCE_IRQ,
++		.name = "SECOND",
++	}
++};
++
++static struct resource pcf50633_mbc_resources[] = {
++	{
++		.start = PCF50633_IRQ_ADPINS,
++		.end = PCF50633_IRQ_ADPINS,
++		.flags = IORESOURCE_IRQ,
++		.name = "ADPINS",
++	},
++	{
++		.start = PCF50633_IRQ_ADPREM,
++		.end = PCF50633_IRQ_ADPREM,
++		.flags = IORESOURCE_IRQ,
++		.name = "ADPREM",
++	},
++	{
++		.start = PCF50633_IRQ_USBINS,
++		.end = PCF50633_IRQ_USBINS,
++		.flags = IORESOURCE_IRQ,
++		.name = "USBINS",
++	},
++	{
++		.start = PCF50633_IRQ_USBREM,
++		.end = PCF50633_IRQ_USBREM,
++		.flags = IORESOURCE_IRQ,
++		.name = "USBREM",
++	},
++	{
++		.start = PCF50633_IRQ_BATFULL,
++		.end = PCF50633_IRQ_BATFULL,
++		.flags = IORESOURCE_IRQ,
++		.name = "BATFULL",
++	},
++	{
++		.start = PCF50633_IRQ_CHGHALT,
++		.end = PCF50633_IRQ_CHGHALT,
++		.flags = IORESOURCE_IRQ,
++		.name = "CHGHALT",
++	},
++	{
++		.start = PCF50633_IRQ_THLIMON,
++		.end = PCF50633_IRQ_THLIMON,
++		.flags = IORESOURCE_IRQ,
++		.name = "THLIMON",
++	},
++	{
++		.start = PCF50633_IRQ_THLIMOFF,
++		.end = PCF50633_IRQ_THLIMOFF,
++		.flags = IORESOURCE_IRQ,
++		.name = "THLIMOFF",
++	},
++	{
++		.start = PCF50633_IRQ_USBLIMON,
++		.end = PCF50633_IRQ_USBLIMON,
++		.flags = IORESOURCE_IRQ,
++		.name = "USBLIMON",
++	},
++	{
++		.start = PCF50633_IRQ_USBLIMOFF,
++		.end = PCF50633_IRQ_USBLIMOFF,
++		.flags = IORESOURCE_IRQ,
++		.name = "USBLIMOFF",
++	},
++	{
++		.start = PCF50633_IRQ_LOWSYS,
++		.end = PCF50633_IRQ_LOWSYS,
++		.flags = IORESOURCE_IRQ,
++		.name = "LOWSYS",
++	},
++	{
++		.start = PCF50633_IRQ_LOWBAT,
++		.end = PCF50633_IRQ_LOWBAT,
++		.flags = IORESOURCE_IRQ,
++		.name = "LOWBAT",
++	},
++};
++
++static struct mfd_cell pcf50633_cells[] = {
++	PCF50633_CELL_RESOURCES("pcf50633-input", pcf50633_input_resources),
++	PCF50633_CELL_RESOURCES("pcf50633-rtc", pcf50633_rtc_resources),
++	PCF50633_CELL_RESOURCES("pcf50633-mbc", pcf50633_mbc_resources),
++	PCF50633_CELL_RESOURCES("pcf50633-adc", pcf50633_adc_resources),
++	PCF50633_CELL("pcf50633-backlight"),
++	PCF50633_CELL("pcf50633-gpio"),
++	PCF50633_CELL_ID("pcf50633-regltr", 0),
++	PCF50633_CELL_ID("pcf50633-regltr", 1),
++	PCF50633_CELL_ID("pcf50633-regltr", 2),
++	PCF50633_CELL_ID("pcf50633-regltr", 3),
++	PCF50633_CELL_ID("pcf50633-regltr", 4),
++	PCF50633_CELL_ID("pcf50633-regltr", 5),
++	PCF50633_CELL_ID("pcf50633-regltr", 6),
++	PCF50633_CELL_ID("pcf50633-regltr", 7),
++	PCF50633_CELL_ID("pcf50633-regltr", 8),
++	PCF50633_CELL_ID("pcf50633-regltr", 9),
++	PCF50633_CELL_ID("pcf50633-regltr", 10),
++};
++
+ static int __devinit pcf50633_probe(struct i2c_client *client,
+ 				const struct i2c_device_id *ids)
+ {
+ 	struct pcf50633 *pcf;
+ 	struct pcf50633_platform_data *pdata = client->dev.platform_data;
+-	int i, ret;
++	int ret;
+ 	int version, variant;
+ 
+ 	if (!client->irq) {
+@@ -287,36 +422,15 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
+ 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
+ 							version, variant);
+ 
+-	pcf50633_irq_init(pcf, client->irq);
+-
+-	/* Create sub devices */
+-	pcf50633_client_dev_register(pcf, "pcf50633-input",
+-						&pcf->input_pdev);
+-	pcf50633_client_dev_register(pcf, "pcf50633-rtc",
+-						&pcf->rtc_pdev);
+-	pcf50633_client_dev_register(pcf, "pcf50633-mbc",
+-						&pcf->mbc_pdev);
+-	pcf50633_client_dev_register(pcf, "pcf50633-adc",
+-						&pcf->adc_pdev);
+-	pcf50633_client_dev_register(pcf, "pcf50633-backlight",
+-						&pcf->bl_pdev);
+-
+-
+-	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
+-		struct platform_device *pdev;
+-
+-		pdev = platform_device_alloc("pcf50633-regltr", i);
+-		if (!pdev) {
+-			dev_err(pcf->dev, "Cannot create regulator %d\n", i);
+-			continue;
+-		}
+-
+-		pdev->dev.parent = pcf->dev;
+-		platform_device_add_data(pdev, &pdata->reg_init_data[i],
+-					sizeof(pdata->reg_init_data[i]));
+-		pcf->regulator_pdev[i] = pdev;
++	ret = pcf50633_irq_init(pcf, client->irq);
++	if (ret)
++		goto err_free;
+ 
+-		platform_device_add(pdev);
++	ret = mfd_add_devices(pcf->dev, 0, pcf50633_cells,
++			ARRAY_SIZE(pcf50633_cells), NULL, pcf->irq_base);
++	if (ret) {
++		dev_err(pcf->dev, "Failed to add mfd cells.\n");
++		goto err_irq_free;
+ 	}
+ 
+ 	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
+@@ -328,6 +442,8 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
+ 
+ 	return 0;
+ 
++err_irq_free:
++	pcf50633_irq_free(pcf);
+ err_free:
+ 	kfree(pcf);
+ 
+@@ -337,19 +453,12 @@ err_free:
+ static int __devexit pcf50633_remove(struct i2c_client *client)
+ {
+ 	struct pcf50633 *pcf = i2c_get_clientdata(client);
+-	int i;
+ 
+ 	sysfs_remove_group(&client->dev.kobj, &pcf_attr_group);
+-	pcf50633_irq_free(pcf);
+ 
+-	platform_device_unregister(pcf->input_pdev);
+-	platform_device_unregister(pcf->rtc_pdev);
+-	platform_device_unregister(pcf->mbc_pdev);
+-	platform_device_unregister(pcf->adc_pdev);
+-	platform_device_unregister(pcf->bl_pdev);
++	mfd_remove_devices(pcf->dev);
+ 
+-	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
+-		platform_device_unregister(pcf->regulator_pdev[i]);
++	pcf50633_irq_free(pcf);
+ 
+ 	kfree(pcf);
+ 
+diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
+deleted file mode 100644
+index 9ab19a8..0000000
+--- a/drivers/mfd/pcf50633-gpio.c
++++ /dev/null
+@@ -1,121 +0,0 @@
+-/* NXP PCF50633 GPIO Driver
+- *
+- * (C) 2006-2008 by Openmoko, Inc.
+- * Author: Balaji Rao <balajirrao@openmoko.org>
+- * All rights reserved.
+- *
+- * Broken down from monstrous PCF50633 driver mainly by
+- * Harald Welte, Andy Green and Werner Almesberger
+- *
+- *  This program is free software; you can redistribute  it and/or modify it
+- *  under  the terms of  the GNU General  Public License as published by the
+- *  Free Software Foundation;  either version 2 of the  License, or (at your
+- *  option) any later version.
+- *
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-
+-#include <linux/mfd/pcf50633/core.h>
+-#include <linux/mfd/pcf50633/gpio.h>
+-
+-enum pcf50633_regulator_id {
+-	PCF50633_REGULATOR_AUTO,
+-	PCF50633_REGULATOR_DOWN1,
+-	PCF50633_REGULATOR_DOWN2,
+-	PCF50633_REGULATOR_LDO1,
+-	PCF50633_REGULATOR_LDO2,
+-	PCF50633_REGULATOR_LDO3,
+-	PCF50633_REGULATOR_LDO4,
+-	PCF50633_REGULATOR_LDO5,
+-	PCF50633_REGULATOR_LDO6,
+-	PCF50633_REGULATOR_HCLDO,
+-	PCF50633_REGULATOR_MEMLDO,
+-};
+-
+-#define PCF50633_REG_AUTOOUT	0x1a
+-#define PCF50633_REG_DOWN1OUT	0x1e
+-#define PCF50633_REG_DOWN2OUT	0x22
+-#define PCF50633_REG_MEMLDOOUT	0x26
+-#define PCF50633_REG_LDO1OUT	0x2d
+-#define PCF50633_REG_LDO2OUT	0x2f
+-#define PCF50633_REG_LDO3OUT	0x31
+-#define PCF50633_REG_LDO4OUT	0x33
+-#define PCF50633_REG_LDO5OUT	0x35
+-#define PCF50633_REG_LDO6OUT	0x37
+-#define PCF50633_REG_HCLDOOUT	0x39
+-
+-static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+-	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
+-	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
+-	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
+-	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
+-	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
+-	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
+-	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
+-	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
+-	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
+-	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
+-	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
+-};
+-
+-int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val)
+-{
+-	u8 reg;
+-
+-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+-
+-	return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_gpio_set);
+-
+-u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
+-{
+-	u8 reg, val;
+-
+-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+-	val = pcf50633_reg_read(pcf, reg) & 0x07;
+-
+-	return val;
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_gpio_get);
+-
+-int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
+-{
+-	u8 val, reg;
+-
+-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+-	val = !!invert << 3;
+-
+-	return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set);
+-
+-int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio)
+-{
+-	u8 reg, val;
+-
+-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+-	val = pcf50633_reg_read(pcf, reg);
+-
+-	return val & (1 << 3);
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get);
+-
+-int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
+-					int gpio, int regulator, int on)
+-{
+-	u8 reg, val, mask;
+-
+-	/* the *ENA register is always one after the *OUT register */
+-	reg = pcf50633_regulator_registers[regulator] + 1;
+-
+-	val = !!on << (gpio - PCF50633_GPIO1);
+-	mask = 1 << (gpio - PCF50633_GPIO1);
+-
+-	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
+-
+-MODULE_LICENSE("GPL");
+diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
+index 1b0192f..4b8269c 100644
+--- a/drivers/mfd/pcf50633-irq.c
++++ b/drivers/mfd/pcf50633-irq.c
+@@ -2,7 +2,7 @@
+  *
+  * (C) 2006-2008 by Openmoko, Inc.
+  * Author: Harald Welte <laforge@openmoko.org>
+- * 	   Balaji Rao <balajirrao@openmoko.org>
++ * 		Balaji Rao <balajirrao@openmoko.org>
+  * All rights reserved.
+  *
+  *  This program is free software; you can redistribute  it and/or modify it
+@@ -12,6 +12,7 @@
+  *
+  */
+ 
++#include <linux/irq.h>
+ #include <linux/interrupt.h>
+ #include <linux/kernel.h>
+ #include <linux/mutex.h>
+@@ -25,92 +26,63 @@
+ #define PCF50633_MBCS1_USBPRES 		0x01
+ #define PCF50633_MBCS1_ADAPTPRES	0x01
+ 
+-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+-			void (*handler) (int, void *), void *data)
++static void pcf50633_irq_lock(struct irq_data *data)
+ {
+-	if (irq < 0 || irq >= PCF50633_NUM_IRQ || !handler)
+-		return -EINVAL;
++	struct pcf50633 *pcf = irq_data_get_irq_chip_data(data);
+ 
+-	if (WARN_ON(pcf->irq_handler[irq].handler))
+-		return -EBUSY;
+-
+-	mutex_lock(&pcf->lock);
+-	pcf->irq_handler[irq].handler = handler;
+-	pcf->irq_handler[irq].data = data;
+-	mutex_unlock(&pcf->lock);
+-
+-	return 0;
++	mutex_lock(&pcf->irq_lock);
+ }
+-EXPORT_SYMBOL_GPL(pcf50633_register_irq);
+ 
+-int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
++static void pcf50633_irq_sync_unlock(struct irq_data *data)
+ {
+-	if (irq < 0 || irq >= PCF50633_NUM_IRQ)
+-		return -EINVAL;
++	struct pcf50633 *pcf = irq_data_get_irq_chip_data(data);
++	unsigned int i;
+ 
+-	mutex_lock(&pcf->lock);
+-	pcf->irq_handler[irq].handler = NULL;
+-	mutex_unlock(&pcf->lock);
++	for (i = 0; i < ARRAY_SIZE(pcf->mask_regs); ++i) {
++		if (pcf->mask_regs[i] == pcf->mask_regs_cur[i])
++			continue;
+ 
+-	return 0;
++		pcf->mask_regs[i] = pcf->mask_regs_cur[i];
++		pcf50633_reg_write(pcf, PCF50633_REG_INT1M + i,
++				pcf->mask_regs[i]);
++	}
++
++	mutex_unlock(&pcf->irq_lock);
+ }
+-EXPORT_SYMBOL_GPL(pcf50633_free_irq);
+ 
+-static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
++static void pcf50633_irq_mask(struct irq_data *data)
+ {
+-	u8 reg, bit;
+-	int ret = 0, idx;
++	struct pcf50633 *pcf = irq_data_get_irq_chip_data(data);
++	int irq = data->irq;
++	u8 bit;
++	int idx;
+ 
+ 	idx = irq >> 3;
+-	reg = PCF50633_REG_INT1M + idx;
+ 	bit = 1 << (irq & 0x07);
+ 
+-	pcf50633_reg_set_bit_mask(pcf, reg, bit, mask ? bit : 0);
+-
+-	mutex_lock(&pcf->lock);
+-
+-	if (mask)
+-		pcf->mask_regs[idx] |= bit;
+-	else
+-		pcf->mask_regs[idx] &= ~bit;
+-
+-	mutex_unlock(&pcf->lock);
+-
+-	return ret;
++	pcf->mask_regs[idx] |= bit;
+ }
+ 
+-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
++static void pcf50633_irq_unmask(struct irq_data *data)
+ {
+-	dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
++	struct pcf50633 *pcf = irq_data_get_irq_chip_data(data);
++	int irq = data->irq;
++	u8 bit;
++	int idx;
+ 
+-	return __pcf50633_irq_mask_set(pcf, irq, 1);
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
+-
+-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
+-{
+-	dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
++	idx = irq >> 3;
++	bit = 1 << (irq & 0x07);
+ 
+-	return __pcf50633_irq_mask_set(pcf, irq, 0);
++	pcf->mask_regs[idx] &= ~bit;
+ }
+-EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
+ 
+-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
+-{
+-	u8 reg, bits;
+-
+-	reg =  irq >> 3;
+-	bits = 1 << (irq & 0x07);
+-
+-	return pcf->mask_regs[reg] & bits;
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
+-
+-static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
+-{
+-	if (pcf->irq_handler[irq].handler)
+-		pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
+-}
++static struct irq_chip pcf50633_irq_chip = {
++	.name = "pcf50633-irq",
++	.irq_mask = pcf50633_irq_mask,
++	.irq_unmask = pcf50633_irq_unmask,
++	.irq_bus_lock = pcf50633_irq_lock,
++	.irq_bus_sync_unlock = pcf50633_irq_sync_unlock,
++};
+ 
+ /* Maximum amount of time ONKEY is held before emergency action is taken */
+ #define PCF50633_ONKEY1S_TIMEOUT 8
+@@ -214,13 +186,16 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
+ 		pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+ 	}
+ 
++	irq = pcf->irq_base;
+ 	for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+ 		/* Unset masked interrupts */
+ 		pcf_int[i] &= ~pcf->mask_regs[i];
+ 
+-		for (j = 0; j < 8 ; j++)
++		for (j = 0; j < 8 ; j++) {
+ 			if (pcf_int[i] & (1 << j))
+-				pcf50633_irq_call_handler(pcf, (i * 8) + j);
++				handle_nested_irq(irq);
++			++irq;
++		}
+ 	}
+ 
+ out:
+@@ -240,15 +215,6 @@ int pcf50633_irq_suspend(struct pcf50633 *pcf)
+ 	 * henceforth */
+ 	disable_irq(pcf->irq);
+ 
+-	/* Save the masks */
+-	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
+-				ARRAY_SIZE(pcf->suspend_irq_masks),
+-					pcf->suspend_irq_masks);
+-	if (ret < 0) {
+-		dev_err(pcf->dev, "error saving irq masks\n");
+-		goto out;
+-	}
+-
+ 	/* Write wakeup irq masks */
+ 	for (i = 0; i < ARRAY_SIZE(res); i++)
+ 		res[i] = ~pcf->pdata->resumers[i];
+@@ -272,8 +238,8 @@ int pcf50633_irq_resume(struct pcf50633 *pcf)
+ 
+ 	/* Write the saved mask registers */
+ 	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+-				ARRAY_SIZE(pcf->suspend_irq_masks),
+-					pcf->suspend_irq_masks);
++				ARRAY_SIZE(pcf->mask_regs),
++					pcf->mask_regs);
+ 	if (ret < 0)
+ 		dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+ 
+@@ -286,33 +252,61 @@ int pcf50633_irq_resume(struct pcf50633 *pcf)
+ 
+ int pcf50633_irq_init(struct pcf50633 *pcf, int irq)
+ {
++	int irq_base;
+ 	int ret;
++	int i;
+ 
++	irq_base = irq_alloc_descs(-1, 0, PCF50633_NUM_IRQ, 0);
++	if (irq_base < 0) {
++		dev_err(pcf->dev, "Failed to allocate irq descs: %d\n", irq_base);
++		return irq_base;
++	}
++
++	mutex_init(&pcf->irq_lock);
+ 	pcf->irq = irq;
++	pcf->irq_base = irq_base;
++
++	/* Mask all irqs */
++	for (i = 0; i < 5; ++i)
++		pcf->mask_regs[i] = 0xff;
+ 
+-	/* Enable all interrupts except RTC SECOND */
+-	pcf->mask_regs[0] = 0x80;
+-	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
+-	pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
+-	pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
+-	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
+-	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
++	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
++					ARRAY_SIZE(pcf->mask_regs), pcf->mask_regs);
++	if (ret < 0)
++		goto err_irq_free_descs;
++
++
++	for (i = irq_base; i < irq_base + PCF50633_NUM_IRQ; ++i) {
++		irq_set_chip_data(i, pcf);
++		irq_set_nested_thread(i, 1);
++		irq_set_chip_and_handler(i, &pcf50633_irq_chip, handle_simple_irq);
++		irq_modify_status(i, IRQ_NOREQUEST, IRQ_NOPROBE);
++	}
+ 
+ 	ret = request_threaded_irq(irq, NULL, pcf50633_irq,
+ 					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ 					"pcf50633", pcf);
+ 
+-	if (ret)
++	if (ret) {
+ 		dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
++		goto err_irq_free_descs;
++	}
+ 
+ 	if (enable_irq_wake(irq) < 0)
+ 		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+ 			"in this hardware revision", irq);
+ 
++
++	return 0;
++
++err_irq_free_descs:
++	irq_free_descs(pcf->irq_base, PCF50633_NUM_IRQ);
++
+ 	return ret;
+ }
+ 
+ void pcf50633_irq_free(struct pcf50633 *pcf)
+ {
+ 	free_irq(pcf->irq, pcf);
++	irq_free_descs(pcf->irq_base, PCF50633_NUM_IRQ);
+ }
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 61d233a..4b530ae 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -79,6 +79,13 @@ struct mmc_blk_data {
+ 
+ static DEFINE_MUTEX(open_lock);
+ 
++enum mmc_blk_status {
++	MMC_BLK_SUCCESS = 0,
++	MMC_BLK_RETRY,
++	MMC_BLK_DATA_ERR,
++	MMC_BLK_CMD_ERR,
++};
++
+ module_param(perdev_minors, int, 0444);
+ MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
+ 
+@@ -165,13 +172,6 @@ static const struct block_device_operations mmc_bdops = {
+ 	.owner			= THIS_MODULE,
+ };
+ 
+-struct mmc_blk_request {
+-	struct mmc_request	mrq;
+-	struct mmc_command	cmd;
+-	struct mmc_command	stop;
+-	struct mmc_data		data;
+-};
+-
+ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
+ {
+ 	int err;
+@@ -331,200 +331,341 @@ out:
+ 	return err ? 0 : 1;
+ }
+ 
+-static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
++static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
++			       struct mmc_card *card,
++			       int disable_multi,
++			       struct mmc_queue *mq)
+ {
+-	struct mmc_blk_data *md = mq->data;
+-	struct mmc_card *card = md->queue.card;
+-	struct mmc_blk_request brq;
+-	int ret = 1, disable_multi = 0;
++	u32 readcmd, writecmd;
++	struct mmc_blk_request *brq = &mqrq->brq;
++	struct request *req = mqrq->req;
+ 
+-	mmc_claim_host(card->host);
++	memset(brq, 0, sizeof(struct mmc_blk_request));
+ 
+-	do {
+-		struct mmc_command cmd;
+-		u32 readcmd, writecmd, status = 0;
+-
+-		memset(&brq, 0, sizeof(struct mmc_blk_request));
+-		brq.mrq.cmd = &brq.cmd;
+-		brq.mrq.data = &brq.data;
+-
+-		brq.cmd.arg = blk_rq_pos(req);
+-		if (!mmc_card_blockaddr(card))
+-			brq.cmd.arg <<= 9;
+-		brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+-		brq.data.blksz = 512;
+-		brq.stop.opcode = MMC_STOP_TRANSMISSION;
+-		brq.stop.arg = 0;
+-		brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+-		brq.data.blocks = blk_rq_sectors(req);
++	brq->mrq.cmd = &brq->cmd;
++	brq->mrq.data = &brq->data;
+ 
+-		/*
+-		 * The block layer doesn't support all sector count
+-		 * restrictions, so we need to be prepared for too big
+-		 * requests.
+-		 */
+-		if (brq.data.blocks > card->host->max_blk_count)
+-			brq.data.blocks = card->host->max_blk_count;
++	brq->cmd.arg = blk_rq_pos(req);
++	if (!mmc_card_blockaddr(card))
++		brq->cmd.arg <<= 9;
++	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
++	brq->data.blksz = 512;
++	brq->stop.opcode = MMC_STOP_TRANSMISSION;
++	brq->stop.arg = 0;
++	brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
++	brq->data.blocks = blk_rq_sectors(req);
+ 
+-		/*
+-		 * After a read error, we redo the request one sector at a time
+-		 * in order to accurately determine which sectors can be read
+-		 * successfully.
++	/*
++	 * The block layer doesn't support all sector count
++	 * restrictions, so we need to be prepared for too big
++	 * requests.
++	 */
++	if (brq->data.blocks > card->host->max_blk_count)
++		brq->data.blocks = card->host->max_blk_count;
++
++	/*
++	 * After a read error, we redo the request one sector at a time
++	 * in order to accurately determine which sectors can be read
++	 * successfully.
++	 */
++	if (disable_multi && brq->data.blocks > 1)
++		brq->data.blocks = 1;
++
++	if (brq->data.blocks > 1) {
++		/* SPI multiblock writes terminate using a special
++		 * token, not a STOP_TRANSMISSION request.
+ 		 */
+-		if (disable_multi && brq.data.blocks > 1)
+-			brq.data.blocks = 1;
++		if (!mmc_host_is_spi(card->host)
++		    || rq_data_dir(req) == READ)
++			brq->mrq.stop = &brq->stop;
++		readcmd = MMC_READ_MULTIPLE_BLOCK;
++		writecmd = MMC_WRITE_MULTIPLE_BLOCK;
++	} else {
++		brq->mrq.stop = NULL;
++		readcmd = MMC_READ_SINGLE_BLOCK;
++		writecmd = MMC_WRITE_BLOCK;
++	}
++	if (rq_data_dir(req) == READ) {
++		brq->cmd.opcode = readcmd;
++		brq->data.flags |= MMC_DATA_READ;
++	} else {
++		brq->cmd.opcode = writecmd;
++		brq->data.flags |= MMC_DATA_WRITE;
++	}
+ 
+-		if (brq.data.blocks > 1) {
+-			/* SPI multiblock writes terminate using a special
+-			 * token, not a STOP_TRANSMISSION request.
+-			 */
+-			if (!mmc_host_is_spi(card->host)
+-					|| rq_data_dir(req) == READ)
+-				brq.mrq.stop = &brq.stop;
+-			readcmd = MMC_READ_MULTIPLE_BLOCK;
+-			writecmd = MMC_WRITE_MULTIPLE_BLOCK;
+-		} else {
+-			brq.mrq.stop = NULL;
+-			readcmd = MMC_READ_SINGLE_BLOCK;
+-			writecmd = MMC_WRITE_BLOCK;
++	mmc_set_data_timeout(&brq->data, card);
++
++	brq->data.sg = mqrq->sg;
++	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
++
++	/*
++	 * Adjust the sg list so it is the same size as the
++	 * request.
++	 */
++	if (brq->data.blocks != blk_rq_sectors(req)) {
++		int i, data_size = brq->data.blocks << 9;
++		struct scatterlist *sg;
++
++		for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
++			data_size -= sg->length;
++			if (data_size <= 0) {
++				sg->length += data_size;
++				i++;
++				break;
++			}
+ 		}
+-		if (rq_data_dir(req) == READ) {
+-			brq.cmd.opcode = readcmd;
+-			brq.data.flags |= MMC_DATA_READ;
+-		} else {
+-			brq.cmd.opcode = writecmd;
+-			brq.data.flags |= MMC_DATA_WRITE;
++		brq->data.sg_len = i;
++	}
++
++	mmc_queue_bounce_pre(mqrq);
++}
++
++static enum mmc_blk_status mmc_blk_get_status(struct mmc_blk_request *brq,
++					      struct request *req,
++					      struct mmc_card *card,
++					      struct mmc_blk_data *md)
++{
++	struct mmc_command cmd;
++	u32 status;
++	enum mmc_blk_status ret = MMC_BLK_SUCCESS;
++
++	/*
++	 * Check for errors here, but don't jump to cmd_err
++	 * until later as we need to wait for the card to leave
++	 * programming mode even when things go wrong.
++	 */
++	if (brq->cmd.error || brq->data.error || brq->stop.error) {
++		if (brq->data.blocks > 1 && rq_data_dir(req) == READ) {
++			/* Redo read one sector at a time */
++			printk(KERN_WARNING "%s: retrying using single "
++			       "block read, brq %p\n",
++			       req->rq_disk->disk_name, brq);
++			ret = MMC_BLK_RETRY;
++			goto out;
+ 		}
++		status = get_card_status(card, req);
++	}
+ 
+-		mmc_set_data_timeout(&brq.data, card);
++	if (brq->cmd.error) {
++		printk(KERN_ERR "%s: error %d sending read/write "
++		       "command, response %#x, card status %#x\n",
++		       req->rq_disk->disk_name, brq->cmd.error,
++		       brq->cmd.resp[0], status);
++	}
+ 
+-		brq.data.sg = mq->sg;
+-		brq.data.sg_len = mmc_queue_map_sg(mq);
++	if (brq->data.error) {
++		if (brq->data.error == -ETIMEDOUT && brq->mrq.stop)
++			/* 'Stop' response contains card status */
++			status = brq->mrq.stop->resp[0];
++		printk(KERN_ERR "%s: error %d transferring data,"
++		       " sector %u, nr %u, card status %#x\n",
++		       req->rq_disk->disk_name, brq->data.error,
++		       (unsigned)blk_rq_pos(req),
++		       (unsigned)blk_rq_sectors(req), status);
++	}
+ 
+-		/*
+-		 * Adjust the sg list so it is the same size as the
+-		 * request.
+-		 */
+-		if (brq.data.blocks != blk_rq_sectors(req)) {
+-			int i, data_size = brq.data.blocks << 9;
+-			struct scatterlist *sg;
+-
+-			for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+-				data_size -= sg->length;
+-				if (data_size <= 0) {
+-					sg->length += data_size;
+-					i++;
+-					break;
+-				}
++	if (brq->stop.error) {
++		printk(KERN_ERR "%s: error %d sending stop command, "
++		       "response %#x, card status %#x\n",
++		       req->rq_disk->disk_name, brq->stop.error,
++		       brq->stop.resp[0], status);
++	}
++
++	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
++		do {
++			int err;
++
++			cmd.opcode = MMC_SEND_STATUS;
++			cmd.arg = card->rca << 16;
++			cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++			err = mmc_wait_for_cmd(card->host, &cmd, 5);
++			if (err) {
++				printk(KERN_ERR "%s: error %d requesting status\n",
++				       req->rq_disk->disk_name, err);
++				ret = MMC_BLK_CMD_ERR;
++				goto out;
+ 			}
+-			brq.data.sg_len = i;
++			/*
++			 * Some cards mishandle the status bits,
++			 * so make sure to check both the busy
++			 * indication and the card state.
++			 */
++		} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
++			 (R1_CURRENT_STATE(cmd.resp[0]) == 7));
++
++#if 0
++		if (cmd.resp[0] & ~0x00000900)
++			printk(KERN_ERR "%s: status = %08x\n",
++			       req->rq_disk->disk_name, cmd.resp[0]);
++		if (mmc_decode_status(cmd.resp)) {
++			ret = MMC_BLK_CMD_ERR;
++			goto out;
+ 		}
+ 
+-		mmc_queue_bounce_pre(mq);
++#endif
++	}
+ 
+-		mmc_wait_for_req(card->host, &brq.mrq);
++	if (brq->cmd.error || brq->stop.error || brq->data.error) {
++		if (rq_data_dir(req) == READ)
++			ret = MMC_BLK_DATA_ERR;
++		else
++			ret = MMC_BLK_CMD_ERR;
++	}
++ out:
++	return ret;
+ 
+-		mmc_queue_bounce_post(mq);
++}
+ 
++static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
++{
++	struct mmc_blk_data *md = mq->data;
++	struct mmc_card *card = md->queue.card;
++	struct mmc_blk_request *brqc = &mq->mqrq_cur->brq;
++	struct mmc_blk_request *brqp = &mq->mqrq_prev->brq;
++	struct mmc_queue_req  *mqrqp = mq->mqrq_prev;
++	struct request *rqp = mqrqp->req;
++	int ret = 0;
++	int disable_multi = 0;
++	enum mmc_blk_status status;
++
++	if (!rqc && !rqp)
++		return 0;
++
++	if (rqc) {
++		/* Claim host for the first request in a serie of requests */
++		if (!rqp)
++			mmc_claim_host(card->host);
++
++		/* Prepare a new request */
++		mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
++		mmc_pre_req(card->host, &brqc->mrq, !rqp);
++	}
++	do {
+ 		/*
+-		 * Check for errors here, but don't jump to cmd_err
+-		 * until later as we need to wait for the card to leave
+-		 * programming mode even when things go wrong.
++		 * If there is an ongoing request, indicated by rqp, wait for
++		 * it to finish before starting a new one.
+ 		 */
+-		if (brq.cmd.error || brq.data.error || brq.stop.error) {
+-			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
+-				/* Redo read one sector at a time */
+-				printk(KERN_WARNING "%s: retrying using single "
+-				       "block read\n", req->rq_disk->disk_name);
+-				disable_multi = 1;
+-				continue;
+-			}
+-			status = get_card_status(card, req);
++		if (rqp)
++			mmc_wait_for_req_done(&brqp->mrq);
++		else {
++			/* start a new asynchronous request */
++			mmc_start_req(card->host, &brqc->mrq);
++			goto out;
+ 		}
+-
+-		if (brq.cmd.error) {
+-			printk(KERN_ERR "%s: error %d sending read/write "
+-			       "command, response %#x, card status %#x\n",
+-			       req->rq_disk->disk_name, brq.cmd.error,
+-			       brq.cmd.resp[0], status);
++		status = mmc_blk_get_status(brqp, rqp, card, md);
++		if (status != MMC_BLK_SUCCESS) {
++			mmc_post_req(card->host, &brqp->mrq, -EINVAL);
++			mmc_queue_bounce_post(mqrqp);
++			if (rqc)
++				mmc_post_req(card->host, &brqc->mrq, -EINVAL);
+ 		}
+ 
+-		if (brq.data.error) {
+-			if (brq.data.error == -ETIMEDOUT && brq.mrq.stop)
+-				/* 'Stop' response contains card status */
+-				status = brq.mrq.stop->resp[0];
+-			printk(KERN_ERR "%s: error %d transferring data,"
+-			       " sector %u, nr %u, card status %#x\n",
+-			       req->rq_disk->disk_name, brq.data.error,
+-			       (unsigned)blk_rq_pos(req),
+-			       (unsigned)blk_rq_sectors(req), status);
+-		}
++		switch (status) {
++		case MMC_BLK_SUCCESS:
++			/*
++			 * A block was successfully transferred.
++			 */
+ 
+-		if (brq.stop.error) {
+-			printk(KERN_ERR "%s: error %d sending stop command, "
+-			       "response %#x, card status %#x\n",
+-			       req->rq_disk->disk_name, brq.stop.error,
+-			       brq.stop.resp[0], status);
+-		}
++			/*
++			 * All data is transferred without errors.
++			 * Defer mmc post processing and _blk_end_request
++			 * until after the new request is started.
++			 */
++			if (blk_rq_bytes(rqp) == brqp->data.bytes_xfered)
++				break;
+ 
+-		if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
+-			do {
+-				int err;
+-
+-				cmd.opcode = MMC_SEND_STATUS;
+-				cmd.arg = card->rca << 16;
+-				cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+-				err = mmc_wait_for_cmd(card->host, &cmd, 5);
+-				if (err) {
+-					printk(KERN_ERR "%s: error %d requesting status\n",
+-					       req->rq_disk->disk_name, err);
+-					goto cmd_err;
+-				}
+-				/*
+-				 * Some cards mishandle the status bits,
+-				 * so make sure to check both the busy
+-				 * indication and the card state.
+-				 */
+-			} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+-				(R1_CURRENT_STATE(cmd.resp[0]) == 7));
++			mmc_post_req(card->host, &brqp->mrq, 0);
++			mmc_queue_bounce_post(mqrqp);
+ 
+-#if 0
+-			if (cmd.resp[0] & ~0x00000900)
+-				printk(KERN_ERR "%s: status = %08x\n",
+-				       req->rq_disk->disk_name, cmd.resp[0]);
+-			if (mmc_decode_status(cmd.resp))
+-				goto cmd_err;
+-#endif
+-		}
++			spin_lock_irq(&md->lock);
++			ret = __blk_end_request(rqp, 0,
++						brqp->data.bytes_xfered);
++			spin_unlock_irq(&md->lock);
+ 
+-		if (brq.cmd.error || brq.stop.error || brq.data.error) {
+-			if (rq_data_dir(req) == READ) {
+-				/*
+-				 * After an error, we redo I/O one sector at a
+-				 * time, so we only reach here after trying to
+-				 * read a single sector.
+-				 */
+-				spin_lock_irq(&md->lock);
+-				ret = __blk_end_request(req, -EIO, brq.data.blksz);
+-				spin_unlock_irq(&md->lock);
+-				continue;
+-			}
++			if (rqc)
++				mmc_post_req(card->host, &brqc->mrq, -EINVAL);
++			break;
++		case MMC_BLK_CMD_ERR:
+ 			goto cmd_err;
++			break;
++		case MMC_BLK_RETRY:
++			disable_multi = 1;
++			ret = 1;
++			break;
++		case MMC_BLK_DATA_ERR:
++			/*
++			 * After an error, we redo I/O one sector at a
++			 * time, so we only reach here after trying to
++			 * read a single sector.
++			 */
++			spin_lock_irq(&md->lock);
++			ret = __blk_end_request(rqp, -EIO, brqp->data.blksz);
++			spin_unlock_irq(&md->lock);
++			if (rqc && !ret)
++				mmc_pre_req(card->host, &brqc->mrq, false);
++			break;
+ 		}
+ 
+-		/*
+-		 * A block was successfully transferred.
+-		 */
++		if (ret) {
++			/*
++			 * In case of a none complete request
++			 * prepare it again and resend.
++			 */
++			mmc_blk_rw_rq_prep(mqrqp, card, disable_multi, mq);
++			mmc_pre_req(card->host, &brqp->mrq, true);
++			mmc_start_req(card->host, &brqp->mrq);
++			if (rqc)
++				mmc_pre_req(card->host, &brqc->mrq, false);
++		}
++	} while (ret);
++
++	/* Previous request is completed, start the new request if any */
++	if (rqc)
++		mmc_start_req(card->host, &brqc->mrq);
++
++	/*
++	 * Post process the previous request while the new request is active.
++	 * In case of error the reuqest is already ended.
++	 */
++	if (status == MMC_BLK_SUCCESS) {
++		mmc_post_req(card->host, &brqp->mrq, 0);
++		mmc_queue_bounce_post(mqrqp);
++
+ 		spin_lock_irq(&md->lock);
+-		ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
++		ret = __blk_end_request(rqp, 0, brqp->data.bytes_xfered);
+ 		spin_unlock_irq(&md->lock);
+-	} while (ret);
+ 
+-	mmc_release_host(card->host);
++		if (ret) {
++			/* If this happen it is a bug */
++			printk(KERN_ERR "[%s] BUG: rq_bytes %d xfered %d\n",
++			       __func__, blk_rq_bytes(rqp),
++			       brqp->data.bytes_xfered);
++			goto cmd_err;
++		}
++	}
++
++	/* 1 indicates one request has been completed */
++	ret = 1;
++ out:
++	/*
++	 * TODO: Find out if it is OK to only release host after the
++	 *       last request. For the last request the current request
++	 *        is NULL, which means no requests are pending.
++	 */
++	/* Release host for the last request in a serie of requests */
++	if (!rqc)
++		mmc_release_host(card->host);
+ 
+-	return 1;
++	/* Current request becomes previous request and vice versa. */
++	mqrqp->brq.mrq.data = NULL;
++	mqrqp->req = NULL;
++	mq->mqrq_prev = mq->mqrq_cur;
++	mq->mqrq_cur = mqrqp;
++
++	return ret;
+ 
+  cmd_err:
++
+  	/*
+  	 * If this is an SD card and we're writing, we can first
+  	 * mark the known good sectors as ok.
+@@ -539,12 +680,12 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+ 		blocks = mmc_sd_num_wr_blocks(card);
+ 		if (blocks != (u32)-1) {
+ 			spin_lock_irq(&md->lock);
+-			ret = __blk_end_request(req, 0, blocks << 9);
++			ret = __blk_end_request(rqp, 0, blocks << 9);
+ 			spin_unlock_irq(&md->lock);
+ 		}
+ 	} else {
+ 		spin_lock_irq(&md->lock);
+-		ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
++		ret = __blk_end_request(rqp, 0, brqp->data.bytes_xfered);
+ 		spin_unlock_irq(&md->lock);
+ 	}
+ 
+@@ -552,15 +693,27 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+ 
+ 	spin_lock_irq(&md->lock);
+ 	while (ret)
+-		ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
++		ret = __blk_end_request(rqp, -EIO, blk_rq_cur_bytes(rqp));
+ 	spin_unlock_irq(&md->lock);
+ 
++	if (rqc) {
++		mmc_claim_host(card->host);
++		mmc_pre_req(card->host, &brqc->mrq, false);
++		mmc_start_req(card->host, &brqc->mrq);
++	}
++
++	/* Current request becomes previous request and vice versa. */
++	mqrqp->brq.mrq.data = NULL;
++	mqrqp->req = NULL;
++	mq->mqrq_prev = mq->mqrq_cur;
++	mq->mqrq_cur = mqrqp;
++
+ 	return 0;
+ }
+ 
+ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+ {
+-	if (req->cmd_flags & REQ_DISCARD) {
++	if (req && req->cmd_flags & REQ_DISCARD) {
+ 		if (req->cmd_flags & REQ_SECURE)
+ 			return mmc_blk_issue_secdiscard_rq(mq, req);
+ 		else
+diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
+index abc1a63..8f7ffad 100644
+--- a/drivers/mmc/card/mmc_test.c
++++ b/drivers/mmc/card/mmc_test.c
+@@ -22,6 +22,7 @@
+ #include <linux/debugfs.h>
+ #include <linux/uaccess.h>
+ #include <linux/seq_file.h>
++#include <linux/random.h>
+ 
+ #define RESULT_OK		0
+ #define RESULT_FAIL		1
+@@ -51,10 +52,12 @@ struct mmc_test_pages {
+  * struct mmc_test_mem - allocated memory.
+  * @arr: array of allocations
+  * @cnt: number of allocations
++ * @size_min_cmn: lowest common size in array of allocations
+  */
+ struct mmc_test_mem {
+ 	struct mmc_test_pages *arr;
+ 	unsigned int cnt;
++	unsigned int size_min_cmn;
+ };
+ 
+ /**
+@@ -148,6 +151,21 @@ struct mmc_test_card {
+ 	struct mmc_test_general_result	*gr;
+ };
+ 
++enum mmc_test_prep_media {
++	MMC_TEST_PREP_NONE = 0,
++	MMC_TEST_PREP_WRITE_FULL = 1 << 0,
++	MMC_TEST_PREP_ERASE = 1 << 1,
++};
++
++struct mmc_test_multiple_rw {
++	unsigned int *bs;
++	unsigned int len;
++	unsigned int size;
++	bool do_write;
++	bool do_nonblock_req;
++	enum mmc_test_prep_media prepare;
++};
++
+ /*******************************************************************/
+ /*  General helper functions                                       */
+ /*******************************************************************/
+@@ -307,6 +325,7 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 	unsigned long max_seg_page_cnt = DIV_ROUND_UP(max_seg_sz, PAGE_SIZE);
+ 	unsigned long page_cnt = 0;
+ 	unsigned long limit = nr_free_buffer_pages() >> 4;
++	unsigned int min_cmn = 0;
+ 	struct mmc_test_mem *mem;
+ 
+ 	if (max_page_cnt > limit)
+@@ -350,6 +369,12 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 		mem->arr[mem->cnt].page = page;
+ 		mem->arr[mem->cnt].order = order;
+ 		mem->cnt += 1;
++		if (!min_cmn)
++			min_cmn = PAGE_SIZE << order;
++		else
++			min_cmn = min(min_cmn,
++				      (unsigned int) (PAGE_SIZE << order));
++
+ 		if (max_page_cnt <= (1UL << order))
+ 			break;
+ 		max_page_cnt -= 1UL << order;
+@@ -360,6 +385,7 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 			break;
+ 		}
+ 	}
++	mem->size_min_cmn = min_cmn;
+ 
+ 	return mem;
+ 
+@@ -386,7 +412,6 @@ static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long sz,
+ 	do {
+ 		for (i = 0; i < mem->cnt; i++) {
+ 			unsigned long len = PAGE_SIZE << mem->arr[i].order;
+-
+ 			if (len > sz)
+ 				len = sz;
+ 			if (len > max_seg_sz)
+@@ -725,6 +750,94 @@ static int mmc_test_check_broken_result(struct mmc_test_card *test,
+ }
+ 
+ /*
++ * Tests nonblock transfer with certain parameters
++ */
++static void mmc_test_nonblock_reset(struct mmc_request *mrq,
++				    struct mmc_command *cmd,
++				    struct mmc_command *stop,
++				    struct mmc_data *data)
++{
++	memset(mrq, 0, sizeof(struct mmc_request));
++	memset(cmd, 0, sizeof(struct mmc_command));
++	memset(data, 0, sizeof(struct mmc_data));
++	memset(stop, 0, sizeof(struct mmc_command));
++
++	mrq->cmd = cmd;
++	mrq->data = data;
++	mrq->stop = stop;
++}
++static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
++				      struct scatterlist *sg, unsigned sg_len,
++				      unsigned dev_addr, unsigned blocks,
++				      unsigned blksz, int write, int count)
++{
++	struct mmc_request mrq1;
++	struct mmc_command cmd1;
++	struct mmc_command stop1;
++	struct mmc_data data1;
++
++	struct mmc_request mrq2;
++	struct mmc_command cmd2;
++	struct mmc_command stop2;
++	struct mmc_data data2;
++
++	struct mmc_request *cur_mrq;
++	struct mmc_request *prev_mrq;
++	int i;
++	int ret = 0;
++
++	if (!test->card->host->ops->pre_req ||
++		!test->card->host->ops->post_req)
++		return -RESULT_UNSUP_HOST;
++
++	mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
++	mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
++
++	cur_mrq = &mrq1;
++	prev_mrq = NULL;
++
++	for (i = 0; i < count; i++) {
++		mmc_test_prepare_mrq(test, cur_mrq, sg, sg_len, dev_addr,
++				blocks, blksz, write);
++		mmc_pre_req(test->card->host, cur_mrq, !prev_mrq);
++
++		if (prev_mrq) {
++			mmc_wait_for_req_done(prev_mrq);
++			mmc_test_wait_busy(test);
++			ret = mmc_test_check_result(test, prev_mrq);
++			if (ret)
++				goto err;
++		}
++
++		mmc_start_req(test->card->host, cur_mrq);
++
++		if (prev_mrq)
++			mmc_post_req(test->card->host, prev_mrq, 0);
++
++		prev_mrq = cur_mrq;
++		if (cur_mrq == &mrq1) {
++			mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
++			cur_mrq = &mrq2;
++		} else {
++			mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
++			cur_mrq = &mrq1;
++		}
++		dev_addr += blocks;
++	}
++
++	mmc_wait_for_req_done(prev_mrq);
++	mmc_test_wait_busy(test);
++	ret = mmc_test_check_result(test, prev_mrq);
++	if (ret)
++		goto err;
++	mmc_post_req(test->card->host, prev_mrq, 0);
++
++	return ret;
++err:
++	return ret;
++}
++
++/*
+  * Tests a basic transfer with certain parameters
+  */
+ static int mmc_test_simple_transfer(struct mmc_test_card *test,
+@@ -1351,14 +1464,17 @@ static int mmc_test_area_transfer(struct mmc_test_card *test,
+ }
+ 
+ /*
+- * Map and transfer bytes.
++ * Map and transfer bytes for multiple transfers.
+  */
+-static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
+-			    unsigned int dev_addr, int write, int max_scatter,
+-			    int timed)
++static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
++				unsigned int dev_addr, int write,
++				int max_scatter, int timed, int count,
++				bool nonblock)
+ {
+ 	struct timespec ts1, ts2;
+-	int ret;
++	int ret = 0;
++	int i;
++	struct mmc_test_area *t = &test->area;
+ 
+ 	/*
+ 	 * In the case of a maximally scattered transfer, the maximum transfer
+@@ -1382,8 +1498,15 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
+ 
+ 	if (timed)
+ 		getnstimeofday(&ts1);
++	if (nonblock)
++		ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_len,
++				 dev_addr, t->blocks, 512, write, count);
++	else
++		for (i = 0; i < count && ret == 0; i++) {
++			ret = mmc_test_area_transfer(test, dev_addr, write);
++			dev_addr += sz >> 9;
++		}
+ 
+-	ret = mmc_test_area_transfer(test, dev_addr, write);
+ 	if (ret)
+ 		return ret;
+ 
+@@ -1391,11 +1514,19 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
+ 		getnstimeofday(&ts2);
+ 
+ 	if (timed)
+-		mmc_test_print_rate(test, sz, &ts1, &ts2);
++		mmc_test_print_avg_rate(test, sz, count, &ts1, &ts2);
+ 
+ 	return 0;
+ }
+ 
++static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
++			    unsigned int dev_addr, int write, int max_scatter,
++			    int timed)
++{
++	return mmc_test_area_io_seq(test, sz, dev_addr, write, max_scatter,
++				    timed, 1, false);
++}
++
+ /*
+  * Write the test area entirely.
+  */
+@@ -1956,6 +2087,144 @@ static int mmc_test_large_seq_write_perf(struct mmc_test_card *test)
+ 	return mmc_test_large_seq_perf(test, 1);
+ }
+ 
++static int mmc_test_rw_multiple(struct mmc_test_card *test,
++				struct mmc_test_multiple_rw *tdata,
++				unsigned int reqsize, unsigned int size)
++{
++	unsigned int dev_addr;
++	struct mmc_test_area *t = &test->area;
++	int ret = 0;
++	int max_reqsize = max(t->mem->size_min_cmn *
++			      min(t->max_segs, t->mem->cnt), t->max_tfr);
++
++	/* Set up test area */
++	if (size > mmc_test_capacity(test->card) / 2 * 512)
++		size = mmc_test_capacity(test->card) / 2 * 512;
++	if (reqsize > max_reqsize)
++		reqsize = max_reqsize;
++	dev_addr = mmc_test_capacity(test->card) / 4;
++	if ((dev_addr & 0xffff0000))
++		dev_addr &= 0xffff0000; /* Round to 64MiB boundary */
++	else
++		dev_addr &= 0xfffff800; /* Round to 1MiB boundary */
++	if (!dev_addr)
++		goto err;
++
++	/* prepare test area */
++	if (mmc_can_erase(test->card) &&
++	    tdata->prepare & MMC_TEST_PREP_ERASE) {
++		ret = mmc_erase(test->card, dev_addr,
++				size / 512, MMC_SECURE_ERASE_ARG);
++		if (ret)
++			ret = mmc_erase(test->card, dev_addr,
++					size / 512, MMC_ERASE_ARG);
++		if (ret)
++			goto err;
++	}
++
++	/* Run test */
++	ret = mmc_test_area_io_seq(test, reqsize, dev_addr,
++				   tdata->do_write, 0, 1, size / reqsize,
++				   tdata->do_nonblock_req);
++	if (ret)
++		goto err;
++
++	return ret;
++ err:
++	printk(KERN_INFO "[%s] error\n", __func__);
++	return ret;
++}
++
++static int mmc_test_rw_multiple_size(struct mmc_test_card *test,
++				     struct mmc_test_multiple_rw *rw)
++{
++	int ret = 0;
++	int i;
++
++	for (i = 0 ; i < rw->len && ret == 0; i++) {
++		ret = mmc_test_rw_multiple(test, rw, rw->bs[i], rw->size);
++		if (ret)
++			break;
++	}
++	return ret;
++}
++
++/*
++ * Multiple blocking write 4k to 4 MB chunks
++ */
++static int mmc_test_profile_mult_write_blocking_perf(struct mmc_test_card *test)
++{
++	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
++			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
++	struct mmc_test_multiple_rw test_data = {
++		.bs = bs,
++		.size = 128*1024*1024,
++		.len = ARRAY_SIZE(bs),
++		.do_write = true,
++		.do_nonblock_req = false,
++		.prepare = MMC_TEST_PREP_ERASE,
++	};
++
++	return mmc_test_rw_multiple_size(test, &test_data);
++};
++
++/*
++ * Multiple none blocking write 4k to 4 MB chunks
++ */
++static int mmc_test_profile_mult_write_nonblock_perf(struct mmc_test_card *test)
++{
++	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
++			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
++	struct mmc_test_multiple_rw test_data = {
++		.bs = bs,
++		.size = 128*1024*1024,
++		.len = ARRAY_SIZE(bs),
++		.do_write = true,
++		.do_nonblock_req = true,
++		.prepare = MMC_TEST_PREP_ERASE,
++	};
++
++	return mmc_test_rw_multiple_size(test, &test_data);
++}
++
++/*
++ * Multiple blocking read 4k to 4 MB chunks
++ */
++static int mmc_test_profile_mult_read_blocking_perf(struct mmc_test_card *test)
++{
++	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
++			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
++	struct mmc_test_multiple_rw test_data = {
++		.bs = bs,
++		.size = 128*1024*1024,
++		.len = ARRAY_SIZE(bs),
++		.do_write = false,
++		.do_nonblock_req = false,
++		.prepare = MMC_TEST_PREP_NONE,
++	};
++
++	return mmc_test_rw_multiple_size(test, &test_data);
++}
++
++/*
++ * Multiple none blocking read 4k to 4 MB chunks
++ */
++static int mmc_test_profile_mult_read_nonblock_perf(struct mmc_test_card *test)
++{
++	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
++			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
++	struct mmc_test_multiple_rw test_data = {
++		.bs = bs,
++		.size = 128*1024*1024,
++		.len = ARRAY_SIZE(bs),
++		.do_write = false,
++		.do_nonblock_req = true,
++		.prepare = MMC_TEST_PREP_NONE,
++	};
++
++	return mmc_test_rw_multiple_size(test, &test_data);
++}
++
+ static const struct mmc_test_case mmc_test_cases[] = {
+ 	{
+ 		.name = "Basic write (no data verification)",
+@@ -2223,6 +2492,33 @@ static const struct mmc_test_case mmc_test_cases[] = {
+ 		.cleanup = mmc_test_area_cleanup,
+ 	},
+ 
++	{
++		.name = "Write performance with blocking req 4k to 4MB",
++		.prepare = mmc_test_area_prepare,
++		.run = mmc_test_profile_mult_write_blocking_perf,
++		.cleanup = mmc_test_area_cleanup,
++	},
++
++	{
++		.name = "Write performance with none blocking req 4k to 4MB",
++		.prepare = mmc_test_area_prepare,
++		.run = mmc_test_profile_mult_write_nonblock_perf,
++		.cleanup = mmc_test_area_cleanup,
++	},
++
++	{
++		.name = "Read performance with blocking req 4k to 4MB",
++		.prepare = mmc_test_area_prepare,
++		.run = mmc_test_profile_mult_read_blocking_perf,
++		.cleanup = mmc_test_area_cleanup,
++	},
++
++	{
++		.name = "Read performance with none blocking req 4k to 4MB",
++		.prepare = mmc_test_area_prepare,
++		.run = mmc_test_profile_mult_read_nonblock_perf,
++		.cleanup = mmc_test_area_cleanup,
++	},
+ };
+ 
+ static DEFINE_MUTEX(mmc_test_lock);
+@@ -2447,6 +2743,32 @@ static const struct file_operations mmc_test_fops_test = {
+ 	.release	= single_release,
+ };
+ 
++static int mtf_testlist_show(struct seq_file *sf, void *data)
++{
++	int i;
++
++	mutex_lock(&mmc_test_lock);
++
++	for (i = 0; i < ARRAY_SIZE(mmc_test_cases); i++)
++		seq_printf(sf, "%d:\t%s\n", i+1, mmc_test_cases[i].name);
++
++	mutex_unlock(&mmc_test_lock);
++
++	return 0;
++}
++
++static int mtf_testlist_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, mtf_testlist_show, inode->i_private);
++}
++
++static const struct file_operations mmc_test_fops_testlist = {
++	.open		= mtf_testlist_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
+ static void mmc_test_free_file_test(struct mmc_card *card)
+ {
+ 	struct mmc_test_dbgfs_file *df, *dfs;
+@@ -2476,6 +2798,10 @@ static int mmc_test_register_file_test(struct mmc_card *card)
+ 		file = debugfs_create_file("test", S_IWUSR | S_IRUGO,
+ 			card->debugfs_root, card, &mmc_test_fops_test);
+ 
++	if (card->debugfs_root)
++		file = debugfs_create_file("testlist", S_IRUGO,
++			card->debugfs_root, card, &mmc_test_fops_testlist);
++
+ 	if (IS_ERR_OR_NULL(file)) {
+ 		dev_err(&card->dev,
+ 			"Can't create file. Perhaps debugfs is disabled.\n");
+diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
+index 2ae7275..2b14d1c 100644
+--- a/drivers/mmc/card/queue.c
++++ b/drivers/mmc/card/queue.c
+@@ -56,9 +56,10 @@ static int mmc_queue_thread(void *d)
+ 		spin_lock_irq(q->queue_lock);
+ 		set_current_state(TASK_INTERRUPTIBLE);
+ 		req = blk_fetch_request(q);
+-		mq->req = req;
++		mq->mqrq_cur->req = req;
+ 		spin_unlock_irq(q->queue_lock);
+ 
++		mq->issue_fn(mq, req);
+ 		if (!req) {
+ 			if (kthread_should_stop()) {
+ 				set_current_state(TASK_RUNNING);
+@@ -71,7 +72,6 @@ static int mmc_queue_thread(void *d)
+ 		}
+ 		set_current_state(TASK_RUNNING);
+ 
+-		mq->issue_fn(mq, req);
+ 	} while (1);
+ 	up(&mq->thread_sem);
+ 
+@@ -97,10 +97,25 @@ static void mmc_request(struct request_queue *q)
+ 		return;
+ 	}
+ 
+-	if (!mq->req)
++	if (!mq->mqrq_cur->req)
+ 		wake_up_process(mq->thread);
+ }
+ 
++struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
++{
++	struct scatterlist *sg;
++
++	sg = kmalloc(sizeof(struct scatterlist)*sg_len, GFP_KERNEL);
++	if (!sg)
++		*err = -ENOMEM;
++	else {
++		*err = 0;
++		sg_init_table(sg, sg_len);
++	}
++
++	return sg;
++}
++
+ /**
+  * mmc_init_queue - initialise a queue structure.
+  * @mq: mmc queue
+@@ -114,6 +129,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 	struct mmc_host *host = card->host;
+ 	u64 limit = BLK_BOUNCE_HIGH;
+ 	int ret;
++	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
++	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+ 
+ 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
+ 		limit = *mmc_dev(host)->dma_mask;
+@@ -123,8 +140,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 	if (!mq->queue)
+ 		return -ENOMEM;
+ 
++	memset(&mq->mqrq_cur, 0, sizeof(mq->mqrq_cur));
++	memset(&mq->mqrq_prev, 0, sizeof(mq->mqrq_prev));
++	mq->mqrq_cur = mqrq_cur;
++	mq->mqrq_prev = mqrq_prev;
+ 	mq->queue->queuedata = mq;
+-	mq->req = NULL;
+ 
+ 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
+ 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
+@@ -158,53 +178,64 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 			bouncesz = host->max_blk_count * 512;
+ 
+ 		if (bouncesz > 512) {
+-			mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+-			if (!mq->bounce_buf) {
++			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
++			if (!mqrq_cur->bounce_buf) {
++				printk(KERN_WARNING "%s: unable to "
++					"allocate bounce cur buffer\n",
++					mmc_card_name(card));
++			}
++			mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
++			if (!mqrq_prev->bounce_buf) {
+ 				printk(KERN_WARNING "%s: unable to "
+-					"allocate bounce buffer\n",
++					"allocate bounce prev buffer\n",
+ 					mmc_card_name(card));
++				kfree(mqrq_cur->bounce_buf);
++				mqrq_cur->bounce_buf = NULL;
+ 			}
+ 		}
+ 
+-		if (mq->bounce_buf) {
++		if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) {
+ 			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
+ 			blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
+ 			blk_queue_max_segments(mq->queue, bouncesz / 512);
+ 			blk_queue_max_segment_size(mq->queue, bouncesz);
+ 
+-			mq->sg = kmalloc(sizeof(struct scatterlist),
+-				GFP_KERNEL);
+-			if (!mq->sg) {
+-				ret = -ENOMEM;
++			mqrq_cur->sg = mmc_alloc_sg(1, &ret);
++			if (ret)
+ 				goto cleanup_queue;
+-			}
+-			sg_init_table(mq->sg, 1);
+ 
+-			mq->bounce_sg = kmalloc(sizeof(struct scatterlist) *
+-				bouncesz / 512, GFP_KERNEL);
+-			if (!mq->bounce_sg) {
+-				ret = -ENOMEM;
++			mqrq_cur->bounce_sg =
++				mmc_alloc_sg(bouncesz / 512, &ret);
++			if (ret)
++				goto cleanup_queue;
++
++			mqrq_prev->sg = mmc_alloc_sg(1, &ret);
++			if (ret)
++				goto cleanup_queue;
++
++			mqrq_prev->bounce_sg =
++				mmc_alloc_sg(bouncesz / 512, &ret);
++			if (ret)
+ 				goto cleanup_queue;
+-			}
+-			sg_init_table(mq->bounce_sg, bouncesz / 512);
+ 		}
+ 	}
+ #endif
+ 
+-	if (!mq->bounce_buf) {
++	if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) {
+ 		blk_queue_bounce_limit(mq->queue, limit);
+ 		blk_queue_max_hw_sectors(mq->queue,
+ 			min(host->max_blk_count, host->max_req_size / 512));
+ 		blk_queue_max_segments(mq->queue, host->max_segs);
+ 		blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+ 
+-		mq->sg = kmalloc(sizeof(struct scatterlist) *
+-			host->max_segs, GFP_KERNEL);
+-		if (!mq->sg) {
+-			ret = -ENOMEM;
++		mqrq_cur->sg = mmc_alloc_sg(host->max_segs, &ret);
++		if (ret)
++			goto cleanup_queue;
++
++
++		mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret);
++		if (ret)
+ 			goto cleanup_queue;
+-		}
+-		sg_init_table(mq->sg, host->max_segs);
+ 	}
+ 
+ 	sema_init(&mq->thread_sem, 1);
+@@ -219,16 +250,22 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 
+ 	return 0;
+  free_bounce_sg:
+- 	if (mq->bounce_sg)
+- 		kfree(mq->bounce_sg);
+- 	mq->bounce_sg = NULL;
++	kfree(mqrq_cur->bounce_sg);
++	mqrq_cur->bounce_sg = NULL;
++	kfree(mqrq_prev->bounce_sg);
++	mqrq_prev->bounce_sg = NULL;
++
+  cleanup_queue:
+- 	if (mq->sg)
+-		kfree(mq->sg);
+-	mq->sg = NULL;
+-	if (mq->bounce_buf)
+-		kfree(mq->bounce_buf);
+-	mq->bounce_buf = NULL;
++	kfree(mqrq_cur->sg);
++	mqrq_cur->sg = NULL;
++	kfree(mqrq_cur->bounce_buf);
++	mqrq_cur->bounce_buf = NULL;
++
++	kfree(mqrq_prev->sg);
++	mqrq_prev->sg = NULL;
++	kfree(mqrq_prev->bounce_buf);
++	mqrq_prev->bounce_buf = NULL;
++
+ 	blk_cleanup_queue(mq->queue);
+ 	return ret;
+ }
+@@ -237,6 +274,8 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
+ {
+ 	struct request_queue *q = mq->queue;
+ 	unsigned long flags;
++	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
++	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+ 
+ 	/* Make sure the queue isn't suspended, as that will deadlock */
+ 	mmc_queue_resume(mq);
+@@ -250,16 +289,23 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
+ 	blk_start_queue(q);
+ 	spin_unlock_irqrestore(q->queue_lock, flags);
+ 
+- 	if (mq->bounce_sg)
+- 		kfree(mq->bounce_sg);
+- 	mq->bounce_sg = NULL;
++	kfree(mqrq_cur->bounce_sg);
++	mqrq_cur->bounce_sg = NULL;
++
++	kfree(mqrq_cur->sg);
++	mqrq_cur->sg = NULL;
+ 
+-	kfree(mq->sg);
+-	mq->sg = NULL;
++	kfree(mqrq_cur->bounce_buf);
++	mqrq_cur->bounce_buf = NULL;
+ 
+-	if (mq->bounce_buf)
+-		kfree(mq->bounce_buf);
+-	mq->bounce_buf = NULL;
++	kfree(mqrq_prev->bounce_sg);
++	mqrq_prev->bounce_sg = NULL;
++
++	kfree(mqrq_prev->sg);
++	mqrq_prev->sg = NULL;
++
++	kfree(mqrq_prev->bounce_buf);
++	mqrq_prev->bounce_buf = NULL;
+ 
+ 	mq->card = NULL;
+ }
+@@ -312,27 +358,27 @@ void mmc_queue_resume(struct mmc_queue *mq)
+ /*
+  * Prepare the sg list(s) to be handed of to the host driver
+  */
+-unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
++unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
+ {
+ 	unsigned int sg_len;
+ 	size_t buflen;
+ 	struct scatterlist *sg;
+ 	int i;
+ 
+-	if (!mq->bounce_buf)
+-		return blk_rq_map_sg(mq->queue, mq->req, mq->sg);
++	if (!mqrq->bounce_buf)
++		return blk_rq_map_sg(mq->queue, mqrq->req, mqrq->sg);
+ 
+-	BUG_ON(!mq->bounce_sg);
++	BUG_ON(!mqrq->bounce_sg);
+ 
+-	sg_len = blk_rq_map_sg(mq->queue, mq->req, mq->bounce_sg);
++	sg_len = blk_rq_map_sg(mq->queue, mqrq->req, mqrq->bounce_sg);
+ 
+-	mq->bounce_sg_len = sg_len;
++	mqrq->bounce_sg_len = sg_len;
+ 
+ 	buflen = 0;
+-	for_each_sg(mq->bounce_sg, sg, sg_len, i)
++	for_each_sg(mqrq->bounce_sg, sg, sg_len, i)
+ 		buflen += sg->length;
+ 
+-	sg_init_one(mq->sg, mq->bounce_buf, buflen);
++	sg_init_one(mqrq->sg, mqrq->bounce_buf, buflen);
+ 
+ 	return 1;
+ }
+@@ -341,19 +387,19 @@ unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
+  * If writing, bounce the data to the buffer before the request
+  * is sent to the host driver
+  */
+-void mmc_queue_bounce_pre(struct mmc_queue *mq)
++void mmc_queue_bounce_pre(struct mmc_queue_req *mqrq)
+ {
+ 	unsigned long flags;
+ 
+-	if (!mq->bounce_buf)
++	if (!mqrq->bounce_buf)
+ 		return;
+ 
+-	if (rq_data_dir(mq->req) != WRITE)
++	if (rq_data_dir(mqrq->req) != WRITE)
+ 		return;
+ 
+ 	local_irq_save(flags);
+-	sg_copy_to_buffer(mq->bounce_sg, mq->bounce_sg_len,
+-		mq->bounce_buf, mq->sg[0].length);
++	sg_copy_to_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
++		mqrq->bounce_buf, mqrq->sg[0].length);
+ 	local_irq_restore(flags);
+ }
+ 
+@@ -361,19 +407,18 @@ void mmc_queue_bounce_pre(struct mmc_queue *mq)
+  * If reading, bounce the data from the buffer after the request
+  * has been handled by the host driver
+  */
+-void mmc_queue_bounce_post(struct mmc_queue *mq)
++void mmc_queue_bounce_post(struct mmc_queue_req *mqrq)
+ {
+ 	unsigned long flags;
+ 
+-	if (!mq->bounce_buf)
++	if (!mqrq->bounce_buf)
+ 		return;
+ 
+-	if (rq_data_dir(mq->req) != READ)
++	if (rq_data_dir(mqrq->req) != READ)
+ 		return;
+ 
+ 	local_irq_save(flags);
+-	sg_copy_from_buffer(mq->bounce_sg, mq->bounce_sg_len,
+-		mq->bounce_buf, mq->sg[0].length);
++	sg_copy_from_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
++		mqrq->bounce_buf, mqrq->sg[0].length);
+ 	local_irq_restore(flags);
+ }
+-
+diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
+index 64e66e0..0e65807 100644
+--- a/drivers/mmc/card/queue.h
++++ b/drivers/mmc/card/queue.h
+@@ -4,19 +4,33 @@
+ struct request;
+ struct task_struct;
+ 
++struct mmc_blk_request {
++	struct mmc_request	mrq;
++	struct mmc_command	cmd;
++	struct mmc_command	stop;
++	struct mmc_data		data;
++};
++
++struct mmc_queue_req {
++	struct request		*req;
++	struct mmc_blk_request	brq;
++	struct scatterlist	*sg;
++	char			*bounce_buf;
++	struct scatterlist	*bounce_sg;
++	unsigned int		bounce_sg_len;
++};
++
+ struct mmc_queue {
+ 	struct mmc_card		*card;
+ 	struct task_struct	*thread;
+ 	struct semaphore	thread_sem;
+ 	unsigned int		flags;
+-	struct request		*req;
+ 	int			(*issue_fn)(struct mmc_queue *, struct request *);
+ 	void			*data;
+ 	struct request_queue	*queue;
+-	struct scatterlist	*sg;
+-	char			*bounce_buf;
+-	struct scatterlist	*bounce_sg;
+-	unsigned int		bounce_sg_len;
++	struct mmc_queue_req	mqrq[2];
++	struct mmc_queue_req	*mqrq_cur;
++	struct mmc_queue_req	*mqrq_prev;
+ };
+ 
+ extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+@@ -24,8 +38,9 @@ extern void mmc_cleanup_queue(struct mmc_queue *);
+ extern void mmc_queue_suspend(struct mmc_queue *);
+ extern void mmc_queue_resume(struct mmc_queue *);
+ 
+-extern unsigned int mmc_queue_map_sg(struct mmc_queue *);
+-extern void mmc_queue_bounce_pre(struct mmc_queue *);
+-extern void mmc_queue_bounce_post(struct mmc_queue *);
++extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
++				     struct mmc_queue_req *);
++extern void mmc_queue_bounce_pre(struct mmc_queue_req *);
++extern void mmc_queue_bounce_post(struct mmc_queue_req *);
+ 
+ #endif
+diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
+index 1f453ac..85296df 100644
+--- a/drivers/mmc/core/core.c
++++ b/drivers/mmc/core/core.c
+@@ -23,6 +23,8 @@
+ #include <linux/log2.h>
+ #include <linux/regulator/consumer.h>
+ #include <linux/pm_runtime.h>
++#include <linux/fault-inject.h>
++#include <linux/random.h>
+ 
+ #include <linux/mmc/card.h>
+ #include <linux/mmc/host.h>
+@@ -82,6 +84,56 @@ static void mmc_flush_scheduled_work(void)
+ 	flush_workqueue(workqueue);
+ }
+ 
++#ifdef CONFIG_FAIL_MMC_REQUEST
++
++static DECLARE_FAULT_ATTR(fail_mmc_request);
++
++static int __init setup_fail_mmc_request(char *str)
++{
++	return setup_fault_attr(&fail_mmc_request, str);
++}
++__setup("fail_mmc_request=", setup_fail_mmc_request);
++
++static void mmc_should_fail_request(struct mmc_host *host,
++				    struct mmc_request *mrq)
++{
++	struct mmc_command *cmd = mrq->cmd;
++	struct mmc_data *data = mrq->data;
++	static const int data_errors[] = {
++		-ETIMEDOUT,
++		-EILSEQ,
++		-EIO,
++	};
++
++	if (!data)
++		return;
++
++	if (cmd->error || data->error || !host->make_it_fail ||
++	    !should_fail(&fail_mmc_request, data->blksz * data->blocks))
++		return;
++
++	data->error = data_errors[random32() % ARRAY_SIZE(data_errors)];
++	data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9;
++}
++
++static int __init fail_mmc_request_debugfs(void)
++{
++	return init_fault_attr_dentries(&fail_mmc_request,
++					"fail_mmc_request");
++}
++
++late_initcall(fail_mmc_request_debugfs);
++
++#else /* CONFIG_FAIL_MMC_REQUEST */
++
++static inline void mmc_should_fail_request(struct mmc_host *host,
++					   struct mmc_data *data)
++{
++}
++
++#endif /* CONFIG_FAIL_MMC_REQUEST */
++
++
+ /**
+  *	mmc_request_done - finish processing an MMC request
+  *	@host: MMC host which completed request
+@@ -108,6 +160,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
+ 		cmd->error = 0;
+ 		host->ops->request(host, mrq);
+ 	} else {
++		mmc_should_fail_request(host, mrq);
++
+ 		led_trigger_event(host->led, LED_OFF);
+ 
+ 		pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
+@@ -198,30 +252,88 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
+ 
+ static void mmc_wait_done(struct mmc_request *mrq)
+ {
+-	complete(mrq->done_data);
++	complete(&mrq->completion);
+ }
+ 
+ /**
+- *	mmc_wait_for_req - start a request and wait for completion
++ *	mmc_pre_req - Prepare for a new request
++ *	@host: MMC host to prepare command
++ *	@mrq: MMC request to prepare for
++ *	@is_first_req: true if there is no previous started request
++ *                     that may run in parellel to this call, otherwise false
++ *
++ *	mmc_pre_req() is called in prior to mmc_start_req() to let
++ *	host prepare for the new request. Preparation of a request may be
++ *	performed while another request is running on the host.
++ */
++void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
++		 bool is_first_req)
++{
++	if (host->ops->pre_req)
++		host->ops->pre_req(host, mrq, is_first_req);
++}
++EXPORT_SYMBOL(mmc_pre_req);
++
++/**
++ *	mmc_post_req - Post process a completed request
++ *	@host: MMC host to post process command
++ *	@mrq: MMC request to post process for
++ *	@err: Error, if none zero, clean up any resources made in pre_req
++ *
++ *	Let the host post process a completed request. Post processing of
++ *	a request may be performed while another reuqest is running.
++ */
++void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, int err)
++{
++	if (host->ops->post_req)
++		host->ops->post_req(host, mrq, err);
++}
++EXPORT_SYMBOL(mmc_post_req);
++
++/**
++ *	mmc_start_req - start a request
+  *	@host: MMC host to start command
+  *	@mrq: MMC request to start
+  *
+- *	Start a new MMC custom command request for a host, and wait
+- *	for the command to complete. Does not attempt to parse the
+- *	response.
++ *	Start a new MMC custom command request for a host.
++ *	Does not wait for the command to complete.
+  */
+-void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
++void mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
+ {
+-	DECLARE_COMPLETION_ONSTACK(complete);
+-
+-	mrq->done_data = &complete;
++	init_completion(&mrq->completion);
+ 	mrq->done = mmc_wait_done;
+ 
+ 	mmc_start_request(host, mrq);
++}
++EXPORT_SYMBOL(mmc_start_req);
+ 
+-	wait_for_completion(&complete);
++/**
++ *	mmc_wait_for_req_done - wait for completion of request
++ *	@mrq: MMC request to wait for
++ *
++ *	Wait for the command to complete. Does not attempt to parse the
++ *	response.
++ */
++void mmc_wait_for_req_done(struct mmc_request *mrq)
++{
++	wait_for_completion(&mrq->completion);
+ }
++EXPORT_SYMBOL(mmc_wait_for_req_done);
+ 
++/**
++ *	mmc_wait_for_req - start a request and wait for completion
++ *	@host: MMC host to start command
++ *	@mrq: MMC request to start
++ *
++ *	Start a new MMC custom command request for a host, and wait
++ *	for the command to complete. Does not attempt to parse the
++ *	response.
++ */
++void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
++{
++	mmc_start_req(host, mrq);
++	mmc_wait_for_req_done(mrq);
++}
+ EXPORT_SYMBOL(mmc_wait_for_req);
+ 
+ /**
+diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
+index 998797e..588e76f 100644
+--- a/drivers/mmc/core/debugfs.c
++++ b/drivers/mmc/core/debugfs.c
+@@ -188,6 +188,11 @@ void mmc_add_host_debugfs(struct mmc_host *host)
+ 				root, &host->clk_delay))
+ 		goto err_node;
+ #endif
++#ifdef CONFIG_FAIL_MMC_REQUEST
++	if (!debugfs_create_u8("make-it-fail", S_IRUSR | S_IWUSR,
++			       root, &host->make_it_fail))
++		goto err_node;
++#endif
+ 	return;
+ 
+ err_node:
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 94df405..872ef4a 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -429,6 +429,17 @@ config MMC_S3C_PIODMA
+ 
+ endchoice
+ 
++config MMC_GLAMO
++	tristate "Glamo S3C SD/MMC Card Interface support"
++	depends on MFD_GLAMO && MMC && REGULATOR
++	select CRC7
++	help
++	  This selects a driver for the MCI interface found in
++	  the S-Media GLAMO chip, as used in Openmoko
++	  neo1973 GTA-02.
++
++	  If unsure, say N.
++
+ config MMC_SDRICOH_CS
+ 	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL && PCI && PCMCIA
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 4f1df0a..7133627 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -27,6 +27,7 @@ ifeq ($(CONFIG_OF),y)
+ obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
+ endif
+ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
++obj-$(CONFIG_MMC_GLAMO)		+= glamo-mci.o
+ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_TMIO_CORE)	+= tmio_mmc_core.o
+diff --git a/drivers/mmc/host/glamo-mci.c b/drivers/mmc/host/glamo-mci.c
+new file mode 100644
+index 0000000..02c4b69
+--- /dev/null
++++ b/drivers/mmc/host/glamo-mci.c
+@@ -0,0 +1,939 @@
++/*
++ *  linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
++ *
++ *  Copyright (C) 2007 Openmoko, Inc,  Andy Green <andy@openmoko.com>
++ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
++ *  Based on S3C MMC driver that was:
++ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/host.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/crc7.h>
++#include <linux/scatterlist.h>
++#include <linux/io.h>
++#include <linux/regulator/consumer.h>
++#include <linux/err.h>
++#include <linux/mfd/glamo.h>
++#include <linux/mfd/glamo-core.h>
++#include <linux/mfd/glamo-regs.h>
++
++struct glamo_mci_host {
++	struct glamo_mmc_platform_data *pdata;
++	struct platform_device	*pdev;
++	struct glamo_core	*core;
++	struct mmc_host		*mmc;
++	struct resource		*mmio_mem;
++	struct resource		*data_mem;
++	void __iomem		*mmio_base;
++	uint16_t __iomem	*data_base;
++
++	unsigned int irq;
++
++	struct regulator *regulator;
++	struct mmc_request *mrq;
++
++	unsigned int clk_rate;
++
++	unsigned short vdd;
++	char power_mode;
++
++	unsigned long transfer_start;
++	unsigned long request_start;
++
++	unsigned char request_counter;
++};
++
++static void glamo_mci_send_request(struct mmc_host *mmc,
++				   struct mmc_request *mrq);
++static void glamo_mci_send_command(struct glamo_mci_host *host,
++				   struct mmc_command *cmd);
++
++/*
++ * Max SD clock rate
++ *
++ * held at /(3 + 1) due to concerns of 100R recommended series resistor
++ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_max_clk=10000000
++ *
++ * for example
++ */
++
++static int sd_max_clk = 17000000;
++module_param(sd_max_clk, int, 0644);
++
++/*
++ * Slow SD clock rate
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_slow_ratio=8
++ *
++ * for example
++ *
++ * platform callback is used to decide effective clock rate, if not
++ * defined then max is used, if defined and returns nonzero, rate is
++ * divided by this factor
++ */
++
++static int sd_slow_ratio = 8;
++module_param(sd_slow_ratio, int, 0644);
++
++/*
++ * Post-power SD clock rate
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_post_power_clock=1000000
++ *
++ * for example
++ *
++ * After changing power to card, clock is held at this rate until first bulk
++ * transfer completes
++ */
++
++static int sd_post_power_clock = 1000000;
++module_param(sd_post_power_clock, int, 0644);
++
++
++static inline void glamomci_reg_write(struct glamo_mci_host *glamo,
++		uint16_t reg, uint16_t val)
++{
++	writew(val, glamo->mmio_base + reg);
++}
++
++static inline uint16_t glamomci_reg_read(struct glamo_mci_host *glamo,
++		uint16_t reg)
++{
++	return readw(glamo->mmio_base + reg);
++}
++
++static void glamomci_reg_set_bit_mask(struct glamo_mci_host *glamo,
++		uint16_t reg, uint16_t mask, uint16_t val)
++{
++	uint16_t tmp;
++
++	val &= mask;
++
++	tmp = glamomci_reg_read(glamo, reg);
++	tmp &= ~mask;
++	tmp |= val;
++	glamomci_reg_write(glamo, reg, tmp);
++}
++
++static void glamo_mci_reset(struct glamo_mci_host *host)
++{
++	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
++
++	glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS1,
++			(uint16_t)(host->data_mem->start));
++	glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS2,
++			(uint16_t)(host->data_mem->start >> 16));
++
++	glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS1,
++			(uint16_t)(host->data_mem->start));
++	glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS2,
++			(uint16_t)(host->data_mem->start >> 16));
++
++}
++
++static int glamo_mci_clock_disable(struct mmc_host *mmc, int lazy)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC);
++	return 0;
++}
++
++static int glamo_mci_clock_enable(struct mmc_host *mmc)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
++	return 0;
++}
++
++static void __iomem *glamo_mci_get_data_addr(struct glamo_mci_host *host,
++	struct mmc_data *data)
++{
++	void __iomem *addr = host->data_base;
++
++	if (data->host_cookie & 1)
++		addr += resource_size(host->data_mem) / 2;
++
++	return addr;
++}
++
++static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
++{
++	void __iomem *from_ptr = glamo_mci_get_data_addr(host, data);
++	struct sg_mapping_iter miter;
++
++	dev_dbg(&host->pdev->dev, "pio_read():\n");
++
++	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
++
++	while (sg_miter_next(&miter)) {
++		memcpy(miter.addr, from_ptr, miter.length);
++		from_ptr += miter.length;
++	}
++
++	sg_miter_stop(&miter);
++
++	dev_dbg(&host->pdev->dev, "pio_read(): "
++			"complete (no more data)\n");
++}
++
++static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
++{
++	void __iomem *to_ptr = glamo_mci_get_data_addr(host, data);
++	struct sg_mapping_iter miter;
++
++	dev_dbg(&host->pdev->dev, "pio_write():\n");
++	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
++
++	while (sg_miter_next(&miter)) {
++		memcpy(to_ptr, miter.addr, miter.length);
++		to_ptr += miter.length;
++
++		data->bytes_xfered += miter.length;
++	}
++	sg_miter_stop(&miter);
++
++	dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
++}
++
++static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
++{
++	int real_rate = 0;
++
++	if (freq)
++		real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC,
++						 freq);
++
++	return real_rate;
++}
++
++static int glamo_mci_wait_idle(struct glamo_mci_host *host,
++			       unsigned long timeout)
++{
++	uint16_t status;
++
++	do {
++		status = glamomci_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
++	} while (!(status & GLAMO_STAT1_MMC_IDLE) &&
++		  time_is_after_jiffies(timeout));
++
++	if (time_is_before_eq_jiffies(timeout)) {
++		glamo_mci_reset(host);
++		return -ETIMEDOUT;
++	}
++
++	return 0;
++}
++
++static void glamo_mci_request_done(struct glamo_mci_host *host,
++				   struct mmc_request *mrq)
++{
++	mmc_request_done(host->mmc, mrq);
++}
++
++static irqreturn_t glamo_mci_irq(int irq, void *data)
++{
++	struct glamo_mci_host *host = data;
++	struct mmc_request *mrq;
++	struct mmc_command *cmd;
++	uint16_t status;
++
++	if (!host->mrq || !host->mrq->cmd)
++		return IRQ_HANDLED;
++
++	mrq = host->mrq;
++	cmd = mrq->cmd;
++
++	status = glamomci_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
++	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
++
++	/* we ignore a data timeout report if we are also told the data came */
++	if (status & GLAMO_STAT1_MMC_RB_DRDY)
++		status &= ~GLAMO_STAT1_MMC_DTOUT;
++
++	if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
++		cmd->error = -ETIMEDOUT;
++	else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
++		cmd->error = -EILSEQ;
++
++	if (cmd->error) {
++		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
++		goto done;
++	}
++
++	/* issue STOP if we have been given one to use */
++	if (mrq->stop)
++		glamo_mci_send_command(host, mrq->stop);
++
++	if (mrq->data && (mrq->data->flags & MMC_DATA_READ)) {
++		mrq->data->bytes_xfered = mrq->data->blocks * mrq->data->blksz;
++		if (!mrq->data->host_cookie)
++			do_pio_read(host, mrq->data);
++	}
++
++	if (mrq->stop)
++		mrq->stop->error = glamo_mci_wait_idle(host, jiffies + HZ);
++
++done:
++	host->mrq = NULL;
++	glamo_mci_request_done(host, cmd->mrq);
++
++	return IRQ_HANDLED;
++}
++
++static void glamo_mci_send_command(struct glamo_mci_host *host,
++		struct mmc_command *cmd)
++{
++	uint8_t u8a[6];
++	uint16_t fire = 0;
++	unsigned int timeout = 1000000;
++	uint16_t *reg_resp = (uint16_t *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
++	uint16_t status;
++	int triggers_int = 1;
++
++	/* if we can't do it, reject as busy */
++	if (!(glamomci_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
++		 GLAMO_STAT1_MMC_IDLE)) {
++		cmd->error = -EBUSY;
++		return;
++	}
++
++	/* create an array in wire order for CRC computation */
++	u8a[0] = 0x40 | (cmd->opcode & 0x3f);
++	u8a[1] = (uint8_t)(cmd->arg >> 24);
++	u8a[2] = (uint8_t)(cmd->arg >> 16);
++	u8a[3] = (uint8_t)(cmd->arg >> 8);
++	u8a[4] = (uint8_t)cmd->arg;
++	u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01;
++
++	/* issue the wire-order array including CRC in register order */
++	glamomci_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
++	glamomci_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
++	glamomci_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
++
++	/* command index toggle */
++	fire |= (host->request_counter & 1) << 12;
++
++	/* set type of command */
++	switch (mmc_cmd_type(cmd)) {
++	case MMC_CMD_BC:
++		fire |= GLAMO_FIRE_MMC_CMDT_BNR;
++		break;
++	case MMC_CMD_BCR:
++		fire |= GLAMO_FIRE_MMC_CMDT_BR;
++		break;
++	case MMC_CMD_AC:
++		fire |= GLAMO_FIRE_MMC_CMDT_AND;
++		break;
++	case MMC_CMD_ADTC:
++		fire |= GLAMO_FIRE_MMC_CMDT_AD;
++		break;
++	}
++	/*
++	 * if it expects a response, set the type expected
++	 *
++	 * R1, Length  : 48bit, Normal response
++	 * R1b, Length : 48bit, same R1, but added card busy status
++	 * R2, Length  : 136bit (really 128 bits with CRC snipped)
++	 * R3, Length  : 48bit (OCR register value)
++	 * R4, Length  : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
++	 * R5, Length  : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
++	 * R6, Length  : 48bit (RCA register)
++	 * R7, Length  : 48bit (interface condition, VHS(voltage supplied),
++	 *                     check pattern, CRC7)
++	 */
++	switch (mmc_resp_type(cmd)) {
++	case MMC_RSP_R1: /* same index as R6 and R7 */
++		fire |= GLAMO_FIRE_MMC_RSPT_R1;
++		break;
++	case MMC_RSP_R1B:
++		fire |= GLAMO_FIRE_MMC_RSPT_R1b;
++		break;
++	case MMC_RSP_R2:
++		fire |= GLAMO_FIRE_MMC_RSPT_R2;
++		break;
++	case MMC_RSP_R3:
++		fire |= GLAMO_FIRE_MMC_RSPT_R3;
++		break;
++	/* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
++	}
++	/*
++	 * From the command index, set up the command class in the host ctrllr
++	 *
++	 * missing guys present on chip but couldn't figure out how to use yet:
++	 *     0x0 "stream read"
++	 *     0x9 "cancel running command"
++	 */
++	switch (cmd->opcode) {
++	case MMC_READ_SINGLE_BLOCK:
++		fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
++		break;
++	case MMC_SWITCH: /* 64 byte payload */
++	case SD_APP_SD_STATUS:
++	case SD_APP_SEND_SCR:
++	case MMC_READ_MULTIPLE_BLOCK:
++		/* we will get an interrupt off this */
++		if (!cmd->mrq->stop) {
++			/* multiblock no stop */
++			fire |= GLAMO_FIRE_MMC_CC_MBRNS;
++		} else {
++			/* multiblock with stop */
++			fire |= GLAMO_FIRE_MMC_CC_MBRS;
++		}
++		break;
++	case MMC_WRITE_BLOCK:
++		fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
++		break;
++	case MMC_WRITE_MULTIPLE_BLOCK:
++		if (cmd->mrq->stop) {
++			/* multiblock with stop */
++			fire |= GLAMO_FIRE_MMC_CC_MBWS;
++		} else {
++			/* multiblock NO stop-- 'RESERVED'? */
++			fire |= GLAMO_FIRE_MMC_CC_MBWNS;
++		}
++		break;
++	case MMC_STOP_TRANSMISSION:
++		fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
++		triggers_int = 0;
++		break;
++	default:
++		fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
++		triggers_int = 0;
++		break;
++	}
++
++	if (cmd->data)
++		host->mrq = cmd->mrq;
++
++	/* always largest timeout */
++	glamomci_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
++
++	/* Generate interrupt on txfer */
++	glamomci_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
++			0x0800 |
++			GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
++			GLAMO_BASIC_MMC_EN_COMPL_INT |
++			GLAMO_BASIC_MMC_EN_DATA_PUPS |
++			GLAMO_BASIC_MMC_EN_CMD_PUP);
++
++	/* send the command out on the wire */
++	/* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
++	glamomci_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
++
++	/* we are deselecting card?  because it isn't going to ack then... */
++	if ((cmd->opcode == 7) && (cmd->arg == 0))
++		return;
++
++	/*
++	 * we must spin until response is ready or timed out
++	 * -- we don't get interrupts unless there is a bulk rx
++	 */
++	do
++		status = glamomci_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
++	while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
++		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
++			     GLAMO_STAT1_MMC_RTOUT |
++			     GLAMO_STAT1_MMC_DTOUT |
++			     GLAMO_STAT1_MMC_BWERR |
++			     GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
++
++	if ((status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) ||
++	    (timeout == 0)) {
++		cmd->error = -ETIMEDOUT;
++	} else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
++		cmd->error = -EILSEQ;
++	}
++
++	if (cmd->flags & MMC_RSP_PRESENT) {
++		if (cmd->flags & MMC_RSP_136) {
++			cmd->resp[3] = readw(&reg_resp[0]) |
++						   (readw(&reg_resp[1]) << 16);
++			cmd->resp[2] = readw(&reg_resp[2]) |
++						   (readw(&reg_resp[3]) << 16);
++			cmd->resp[1] = readw(&reg_resp[4]) |
++						   (readw(&reg_resp[5]) << 16);
++			cmd->resp[0] = readw(&reg_resp[6]) |
++						   (readw(&reg_resp[7]) << 16);
++		} else {
++			cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
++					   (readw(&reg_resp[1]) << 8) |
++					   (readw(&reg_resp[2]) << 24);
++		}
++	}
++}
++
++static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
++		struct mmc_data *data)
++{
++	unsigned long addr = host->data_mem->start;
++
++	if (data->host_cookie & 1)
++		addr += resource_size(host->data_mem) / 2;
++
++	/* set up the block info */
++	glamomci_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
++	glamomci_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
++
++	if (data->flags & MMC_DATA_WRITE) {
++		glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS1, addr);
++		glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS2, addr >> 16);
++	} else {
++		glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS1, addr);
++		glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS2, addr >> 16);
++	}
++
++	if ((data->flags & MMC_DATA_WRITE) && !data->host_cookie)
++		do_pio_write(host, data);
++
++	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
++				   data->blksz, data->blocks);
++	return 0;
++}
++
++static void glamo_mci_send_request(struct mmc_host *mmc,
++		struct mmc_request *mrq)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	struct mmc_command *cmd = mrq->cmd;
++
++	host->request_counter++;
++	host->request_start = jiffies;
++
++	if (cmd->data) {
++		if (glamo_mci_prepare_pio(host, cmd->data)) {
++			cmd->error = -EIO;
++			cmd->data->error = -EIO;
++			goto done;
++		}
++	}
++
++	dev_dbg(&host->pdev->dev, "cmd 0x%x, "
++		 "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
++		 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
++		 cmd->flags);
++
++	glamo_mci_send_command(host, cmd);
++
++	/*
++	 * if we don't have bulk data to take care of, we're done
++	 */
++	if (!cmd->data || cmd->error)
++		goto done;
++
++	/*
++	 * Otherwise can can use the interrupt as async completion --
++	 * if there is read data coming, or we wait for write data to complete,
++	 * exit without mmc_request_done() as the payload interrupt
++	 * will service it
++	 */
++	dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
++	return;
++done:
++	if (!cmd->error)
++		cmd->error = glamo_mci_wait_idle(host, jiffies + 2 * HZ);
++	glamo_mci_request_done(host, mrq);
++}
++
++static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
++				     unsigned char power_mode)
++{
++	int ret;
++
++	if (power_mode == host->power_mode)
++		return;
++
++	switch (power_mode) {
++	case MMC_POWER_UP:
++		if (host->power_mode == MMC_POWER_OFF) {
++			ret = regulator_enable(host->regulator);
++			if (ret)
++				dev_err(&host->pdev->dev,
++					"Failed to enable regulator: %d\n",
++					ret);
++		}
++		break;
++	case MMC_POWER_ON:
++		break;
++	case MMC_POWER_OFF:
++	default:
++		ret = regulator_disable(host->regulator);
++		if (ret)
++			dev_warn(&host->pdev->dev,
++				"Failed to disable regulator: %d\n",
++				ret);
++		break;
++	}
++	host->power_mode = power_mode;
++}
++
++static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	int bus_width = 0;
++	int rate;
++	int sd_drive;
++	int ret;
++
++	mmc_host_enable(mmc);
++
++	/* Set power */
++	glamo_mci_set_power_mode(host, ios->power_mode);
++
++	if (host->vdd != ios->vdd) {
++		ret = mmc_regulator_set_ocr(mmc, host->regulator, ios->vdd);
++		if (ret)
++			dev_err(&host->pdev->dev,
++				"Failed to set regulator voltage: %d\n", ret);
++		else
++			host->vdd = ios->vdd;
++	}
++
++	rate = glamo_mci_set_card_clock(host, ios->clock);
++
++	if ((ios->power_mode == MMC_POWER_ON) ||
++		(ios->power_mode == MMC_POWER_UP)) {
++		dev_info(&host->pdev->dev,
++			"powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
++			"Bus width=%d\n", ios->vdd,
++			rate / 1000, 0,
++			ios->clock / 1000, (int)ios->bus_width);
++	} else {
++		dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
++	}
++
++	/* set bus width */
++	if (ios->bus_width == MMC_BUS_WIDTH_4)
++		bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
++
++	sd_drive = (rate * 4) / host->clk_rate;
++	if (sd_drive > 3)
++		sd_drive = 3;
++
++	glamomci_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
++				GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xc0,
++						   bus_width | sd_drive << 6);
++
++	if (host->power_mode == MMC_POWER_OFF)
++		mmc_host_disable(host->mmc);
++	else
++		mmc_host_lazy_disable(host->mmc);
++}
++
++static void glamo_mci_pre_request(struct mmc_host *mmc,
++		struct mmc_request *mrq, bool is_first_req)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++
++	mrq->data->host_cookie = (host->request_counter & 1) | 2;
++
++	/* if write, prep the write into the shared RAM before the command */
++	if (mrq->data->flags & MMC_DATA_WRITE)
++		do_pio_write(host, mrq->data);
++}
++
++static void glamo_mci_post_request(struct mmc_host *mmc,
++		struct mmc_request *mrq, int err)
++{
++	struct glamo_mci_host *host = mmc_priv(mmc);
++
++	if (!mrq->data->host_cookie)
++		return;
++
++	if (err)
++		return;
++
++	if (mrq->data->flags & MMC_DATA_READ)
++		do_pio_read(host, mrq->data);
++
++	mrq->data->host_cookie = 0;
++}
++
++static struct mmc_host_ops glamo_mci_ops = {
++	.enable		= glamo_mci_clock_enable,
++	.disable	= glamo_mci_clock_disable,
++	.request	= glamo_mci_send_request,
++	.post_req	= glamo_mci_post_request,
++	.pre_req	= glamo_mci_pre_request,
++	.set_ios	= glamo_mci_set_ios,
++};
++
++static int __devinit glamo_mci_probe(struct platform_device *pdev)
++{
++	struct mmc_host *mmc;
++	struct glamo_mci_host *host;
++	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
++	int ret;
++
++	dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
++
++	mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
++	if (!mmc) {
++		ret = -ENOMEM;
++		goto probe_out;
++	}
++
++	host = mmc_priv(mmc);
++	host->mmc = mmc;
++	host->pdev = pdev;
++	if (core->pdata)
++		host->pdata = core->pdata->mmc_data;
++	host->power_mode = MMC_POWER_OFF;
++	host->core = core;
++
++	host->irq = platform_get_irq(pdev, 0);
++
++	host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
++	if (IS_ERR(host->regulator)) {
++		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
++		ret = PTR_ERR(host->regulator);
++		goto probe_free_host;
++	}
++
++	host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!host->mmio_mem) {
++		dev_err(&pdev->dev,
++			"failed to get io memory region resouce.\n");
++		ret = -ENOENT;
++		goto probe_regulator_put;
++	}
++
++	host->mmio_mem = request_mem_region(host->mmio_mem->start,
++					    resource_size(host->mmio_mem),
++					    pdev->name);
++
++	if (!host->mmio_mem) {
++		dev_err(&pdev->dev, "failed to request io memory region.\n");
++		ret = -ENOENT;
++		goto probe_regulator_put;
++	}
++
++	host->mmio_base = ioremap(host->mmio_mem->start,
++				  resource_size(host->mmio_mem));
++	if (!host->mmio_base) {
++		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
++		ret = -EINVAL;
++		goto probe_free_mem_region_mmio;
++	}
++
++
++	/* Get ahold of our data buffer we use for data in and out on MMC */
++	host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (!host->data_mem) {
++		dev_err(&pdev->dev,
++			"failed to get io memory region resource.\n");
++		ret = -ENOENT;
++		goto probe_iounmap_mmio;
++	}
++
++	host->data_mem = request_mem_region(host->data_mem->start,
++					    resource_size(host->data_mem),
++					    pdev->name);
++
++	if (!host->data_mem) {
++		dev_err(&pdev->dev, "failed to request io memory region.\n");
++		ret = -ENOENT;
++		goto probe_iounmap_mmio;
++	}
++	host->data_base = ioremap(host->data_mem->start,
++				  resource_size(host->data_mem));
++
++	if (host->data_base == 0) {
++		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
++		ret = -EINVAL;
++		goto probe_free_mem_region_data;
++	}
++
++	ret = request_threaded_irq(host->irq, NULL, glamo_mci_irq, IRQF_SHARED,
++				   pdev->name, host);
++	if (ret) {
++		dev_err(&pdev->dev, "failed to register irq.\n");
++		goto probe_iounmap_data;
++	}
++
++
++	host->vdd = 0;
++	host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);
++
++	/* explain our host controller capabilities */
++	mmc->ops	= &glamo_mci_ops;
++	mmc->ocr_avail	= mmc_regulator_get_ocrmask(host->regulator);
++	mmc->caps	= MMC_CAP_4_BIT_DATA |
++			    MMC_CAP_MMC_HIGHSPEED |
++			    MMC_CAP_SD_HIGHSPEED;
++
++	if (host->pdata->nonremovable)
++		mmc->caps |= MMC_CAP_NONREMOVABLE;
++
++	mmc->f_min	= host->clk_rate / 256;
++	mmc->f_max	= sd_max_clk;
++
++	mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
++	mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
++	mmc->max_req_size  = resource_size(host->data_mem) / 2;
++	mmc->max_seg_size  = mmc->max_req_size;
++	mmc->max_segs = 128;
++
++	if (mmc->ocr_avail < 0) {
++		dev_warn(&pdev->dev,
++			"Failed to get ocr list for regulator: %d.\n",
++			mmc->ocr_avail);
++		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++	}
++
++	platform_set_drvdata(pdev, mmc);
++
++	mmc->caps |= MMC_CAP_DISABLE;
++	mmc_set_disable_delay(mmc, 1000 / 16);
++
++	mmc_host_enable(mmc);
++	glamo_mci_reset(host);
++
++	ret = mmc_add_host(mmc);
++	if (ret) {
++		dev_err(&pdev->dev, "failed to add mmc host.\n");
++		goto probe_mmc_host_disable;
++	}
++
++	mmc_host_lazy_disable(mmc);
++
++	return 0;
++
++probe_mmc_host_disable:
++	mmc_host_disable(mmc);
++	free_irq(host->irq, host);
++probe_iounmap_data:
++	iounmap(host->data_base);
++probe_free_mem_region_data:
++	release_mem_region(host->data_mem->start,
++			   resource_size(host->data_mem));
++probe_iounmap_mmio:
++	iounmap(host->mmio_base);
++probe_free_mem_region_mmio:
++	release_mem_region(host->mmio_mem->start,
++			   resource_size(host->mmio_mem));
++probe_regulator_put:
++	regulator_put(host->regulator);
++probe_free_host:
++	mmc_free_host(mmc);
++probe_out:
++	return ret;
++}
++
++static int __devexit glamo_mci_remove(struct platform_device *pdev)
++{
++	struct mmc_host	*mmc = platform_get_drvdata(pdev);
++	struct glamo_mci_host *host = mmc_priv(mmc);
++
++	mmc_host_enable(mmc);
++	mmc_remove_host(mmc);
++	mmc_host_disable(mmc);
++
++	synchronize_irq(host->irq);
++	free_irq(host->irq, host);
++
++	iounmap(host->mmio_base);
++	iounmap(host->data_base);
++	release_mem_region(host->mmio_mem->start,
++				resource_size(host->mmio_mem));
++	release_mem_region(host->data_mem->start,
++				resource_size(host->data_mem));
++
++	regulator_put(host->regulator);
++
++	mmc_free_host(mmc);
++
++	return 0;
++}
++
++
++#ifdef CONFIG_PM
++
++static int glamo_mci_suspend(struct device *dev)
++{
++	struct mmc_host *mmc = dev_get_drvdata(dev);
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	int ret;
++
++	disable_irq(host->irq);
++
++	mmc_host_enable(mmc);
++	ret = mmc_suspend_host(mmc);
++	mmc_host_disable(mmc);
++
++	return ret;
++}
++
++static int glamo_mci_resume(struct device *dev)
++{
++	struct mmc_host *mmc = dev_get_drvdata(dev);
++	struct glamo_mci_host *host = mmc_priv(mmc);
++	int ret;
++
++	mmc_host_enable(mmc);
++	glamo_mci_reset(host);
++	mdelay(10);
++
++	enable_irq(host->irq);
++
++	ret = mmc_resume_host(host->mmc);
++
++	mmc_host_lazy_disable(host->mmc);
++
++	return ret;
++}
++
++static SIMPLE_DEV_PM_OPS(glamo_mci_pm_ops, glamo_mci_suspend, glamo_mci_resume);
++#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)
++
++#else /* CONFIG_PM */
++#define GLAMO_MCI_PM_OPS NULL
++#endif /* CONFIG_PM */
++
++
++static struct platform_driver glamo_mci_driver = {
++	.probe  = glamo_mci_probe,
++	.remove = __devexit_p(glamo_mci_remove),
++	.driver = {
++		.name	= "glamo-mci",
++		.owner	= THIS_MODULE,
++		.pm	= GLAMO_MCI_PM_OPS,
++	},
++};
++
++static int __init glamo_mci_init(void)
++{
++	platform_driver_register(&glamo_mci_driver);
++	return 0;
++}
++module_init(glamo_mci_init);
++
++static void __exit glamo_mci_exit(void)
++{
++	platform_driver_unregister(&glamo_mci_driver);
++}
++module_exit(glamo_mci_exit);
++
++MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_ALIAS("platform:glamo-mci");
+diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
+index 33d832d..cb5d2c0 100644
+--- a/drivers/mtd/nand/s3c2410.c
++++ b/drivers/mtd/nand/s3c2410.c
+@@ -813,7 +813,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ 	nmtd->mtd.owner    = THIS_MODULE;
+ 	nmtd->set	   = set;
+ 
+-	if (hardware_ecc) {
++	if (!(info->platform && info->platform->software_ecc) && hardware_ecc) {
+ 		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ 		chip->ecc.correct   = s3c2410_nand_correct_data;
+ 		chip->ecc.mode	    = NAND_ECC_HW;
+diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
+index 52a462f..985f350 100644
+--- a/drivers/power/Kconfig
++++ b/drivers/power/Kconfig
+@@ -14,6 +14,12 @@ config POWER_SUPPLY_DEBUG
+ 	  Say Y here to enable debugging messages for power supply class
+ 	  and drivers.
+ 
++config BATTERY_PLATFORM
++	tristate "Platform battery driver"
++	help
++	  Say Y here to include support for battery driver that gets all
++	  information from platform functions.
++
+ config PDA_POWER
+ 	tristate "Generic PDA/phone power driver"
+ 	depends on !S390
+diff --git a/drivers/power/Makefile b/drivers/power/Makefile
+index 8385bfa..59530ee 100644
+--- a/drivers/power/Makefile
++++ b/drivers/power/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_WM831X_POWER)	+= wm831x_power.o
+ obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
+ obj-$(CONFIG_TEST_POWER)	+= test_power.o
+ 
++obj-$(CONFIG_BATTERY_PLATFORM)	+= platform_battery.o
+ obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+ obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+ obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
+diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
+index 4fa52e1..97dbcb2 100644
+--- a/drivers/power/pcf50633-charger.c
++++ b/drivers/power/pcf50633-charger.c
+@@ -24,9 +24,27 @@
+ #include <linux/platform_device.h>
+ #include <linux/power_supply.h>
+ 
++#include <linux/interrupt.h>
++
+ #include <linux/mfd/pcf50633/core.h>
+ #include <linux/mfd/pcf50633/mbc.h>
+ 
++enum pcf50633_mbc_irqs {
++	PCF50633_MBC_IRQ_ADPINS,
++	PCF50633_MBC_IRQ_ADPREM,
++	PCF50633_MBC_IRQ_USBINS,
++	PCF50633_MBC_IRQ_USBREM,
++	PCF50633_MBC_IRQ_BATFULL,
++	PCF50633_MBC_IRQ_CHGHALT,
++	PCF50633_MBC_IRQ_THLIMON,
++	PCF50633_MBC_IRQ_THLIMOFF,
++	PCF50633_MBC_IRQ_USBLIMON,
++	PCF50633_MBC_IRQ_USBLIMOFF,
++	PCF50633_MBC_IRQ_LOWSYS,
++	PCF50633_MBC_IRQ_LOWBAT,
++	PCF50633_MBC_NUM_IRQS,
++};
++
+ struct pcf50633_mbc {
+ 	struct pcf50633 *pcf;
+ 
+@@ -36,11 +54,13 @@ struct pcf50633_mbc {
+ 	struct power_supply usb;
+ 	struct power_supply adapter;
+ 	struct power_supply ac;
++
++	int irqs[PCF50633_MBC_NUM_IRQS];
+ };
+ 
+-int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
++static int __pcf50633_mbc_usb_curlim_set(struct pcf50633_mbc *mbc, int ma)
+ {
+-	struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
++	struct pcf50633 *pcf = mbc->pcf;
+ 	int ret = 0;
+ 	u8 bits;
+ 	int charging_start = 1;
+@@ -80,14 +100,14 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+ 	 * gets reset to the wrong thing
+ 	 */
+ 
+-	if (mbc->pcf->pdata->charger_reference_current_ma) {
+-		mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
++	if (pcf->pdata->charger_reference_current_ma) {
++		mbcc5 = (ma << 8) / pcf->pdata->charger_reference_current_ma;
+ 		if (mbcc5 > 255)
+ 			mbcc5 = 255;
+-		pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++		pcf50633_reg_write(pcf, PCF50633_REG_MBCC5, mbcc5);
+ 	}
+ 
+-	mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
++	mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ 	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+ 
+ 	/* If chgmod == BATFULL, setting chgena has no effect.
+@@ -108,18 +128,29 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+ 
+ 	return ret;
+ }
++
++int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
++{
++	struct pcf50633_mbc *mbc = pcf->mbc;
++
++	if (!mbc)
++		return -ENODEV;
++
++	return __pcf50633_mbc_usb_curlim_set(mbc, ma);
++}
+ EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
+ 
++
+ int pcf50633_mbc_get_status(struct pcf50633 *pcf)
+ {
+-	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
++	struct pcf50633_mbc *mbc = pcf->mbc;
+ 	int status = 0;
+ 	u8 chgmod;
+ 
+ 	if (!mbc)
+ 		return 0;
+ 
+-	chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
++	chgmod = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2)
+ 		& PCF50633_MBCS2_MBC_MASK;
+ 
+ 	if (mbc->usb_online)
+@@ -143,7 +174,7 @@ EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+ 
+ int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
+ {
+-	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
++	struct pcf50633_mbc *mbc = pcf->mbc;
+ 
+ 	if (!mbc)
+ 		return 0;
+@@ -195,7 +226,7 @@ static ssize_t set_usblim(struct device *dev,
+ 	if (ret)
+ 		return -EINVAL;
+ 
+-	pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
++	__pcf50633_mbc_usb_curlim_set(mbc, ma);
+ 
+ 	return count;
+ }
+@@ -259,31 +290,34 @@ static struct attribute_group mbc_attr_group = {
+ 	.attrs	= pcf50633_mbc_sysfs_entries,
+ };
+ 
+-static void
+-pcf50633_mbc_irq_handler(int irq, void *data)
++static irqreturn_t pcf50633_mbc_irq_handler(int irq, void *data)
+ {
+ 	struct pcf50633_mbc *mbc = data;
+ 
+ 	/* USB */
+-	if (irq == PCF50633_IRQ_USBINS) {
++	if (irq == mbc->irqs[PCF50633_MBC_IRQ_USBINS]) {
+ 		mbc->usb_online = 1;
+-	} else if (irq == PCF50633_IRQ_USBREM) {
++	} else if (irq == mbc->irqs[PCF50633_MBC_IRQ_USBREM]) {
+ 		mbc->usb_online = 0;
+-		pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
++		__pcf50633_mbc_usb_curlim_set(mbc, 0);
+ 	}
+ 
+ 	/* Adapter */
+-	if (irq == PCF50633_IRQ_ADPINS)
++	if (irq == mbc->irqs[PCF50633_MBC_IRQ_ADPINS])
+ 		mbc->adapter_online = 1;
+-	else if (irq == PCF50633_IRQ_ADPREM)
++	else if (irq == mbc->irqs[PCF50633_MBC_IRQ_ADPREM])
+ 		mbc->adapter_online = 0;
+ 
+ 	power_supply_changed(&mbc->ac);
+ 	power_supply_changed(&mbc->usb);
+ 	power_supply_changed(&mbc->adapter);
+ 
+-	if (mbc->pcf->pdata->mbc_event_callback)
++	if (mbc->pcf->pdata->mbc_event_callback) {
++		irq -= mbc->pcf->irq_base;
+ 		mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
++	}
++
++	return IRQ_HANDLED;
+ }
+ 
+ static int adapter_get_property(struct power_supply *psy,
+@@ -351,25 +385,27 @@ static enum power_supply_property power_props[] = {
+ 	POWER_SUPPLY_PROP_ONLINE,
+ };
+ 
+-static const u8 mbc_irq_handlers[] = {
+-	PCF50633_IRQ_ADPINS,
+-	PCF50633_IRQ_ADPREM,
+-	PCF50633_IRQ_USBINS,
+-	PCF50633_IRQ_USBREM,
+-	PCF50633_IRQ_BATFULL,
+-	PCF50633_IRQ_CHGHALT,
+-	PCF50633_IRQ_THLIMON,
+-	PCF50633_IRQ_THLIMOFF,
+-	PCF50633_IRQ_USBLIMON,
+-	PCF50633_IRQ_USBLIMOFF,
+-	PCF50633_IRQ_LOWSYS,
+-	PCF50633_IRQ_LOWBAT,
++static const char *pcf50633_mbc_irq_names[PCF50633_MBC_NUM_IRQS] = {
++	"ADPINS",
++	"ADPREM",
++	"USBINS",
++	"USBREM",
++	"BATFULL",
++	"CHGHALT",
++	"THLIMON",
++	"THLIMOFF",
++	"USBLIMON",
++	"USBLIMOFF",
++	"LOWSYS",
++	"LOWBAT",
+ };
+ 
+ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+ {
++	struct pcf50633 *pcf = dev_to_pcf50633(pdev->dev.parent);
+ 	struct pcf50633_mbc *mbc;
+ 	int ret;
++	int irq;
+ 	int i;
+ 	u8 mbcs1;
+ 
+@@ -377,13 +413,19 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+ 	if (!mbc)
+ 		return -ENOMEM;
+ 
+-	platform_set_drvdata(pdev, mbc);
+-	mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
++	for (i = 0; i < PCF50633_MBC_NUM_IRQS; ++i) {
++		irq = platform_get_irq_byname(pdev, pcf50633_mbc_irq_names[i]);
++		if (irq <= 0) {
++			dev_err(&pdev->dev, "Failed to get %s irq: %d\n",
++					pcf50633_mbc_irq_names[i], irq);
++			ret = irq ?: -EINVAL;
++			goto err_free;
++		}
++		mbc->irqs[i] = irq;
++	}
+ 
+-	/* Set up IRQ handlers */
+-	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+-		pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
+-					pcf50633_mbc_irq_handler, mbc);
++	platform_set_drvdata(pdev, mbc);
++	mbc->pcf = pcf;
+ 
+ 	/* Create power supplies */
+ 	mbc->adapter.name		= "adapter";
+@@ -413,38 +455,63 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+ 	ret = power_supply_register(&pdev->dev, &mbc->adapter);
+ 	if (ret) {
+ 		dev_err(mbc->pcf->dev, "failed to register adapter\n");
+-		kfree(mbc);
+-		return ret;
++		goto err_free;
+ 	}
+ 
+ 	ret = power_supply_register(&pdev->dev, &mbc->usb);
+ 	if (ret) {
+ 		dev_err(mbc->pcf->dev, "failed to register usb\n");
+-		power_supply_unregister(&mbc->adapter);
+-		kfree(mbc);
+-		return ret;
++		goto err_unregister_adapter;
+ 	}
+ 
+ 	ret = power_supply_register(&pdev->dev, &mbc->ac);
+ 	if (ret) {
+ 		dev_err(mbc->pcf->dev, "failed to register ac\n");
+-		power_supply_unregister(&mbc->adapter);
+-		power_supply_unregister(&mbc->usb);
+-		kfree(mbc);
+-		return ret;
++		goto err_unregister_usb;
+ 	}
+ 
+ 	ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
+-	if (ret)
++	if (ret) {
+ 		dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
++		goto err_unregister_ac;
++	}
++
++	/* Set up IRQ handlers */
++	for (i = 0; i < PCF50633_MBC_NUM_IRQS; ++i) {
++		ret = request_threaded_irq(mbc->irqs[i], NULL,
++				pcf50633_mbc_irq_handler, 0,
++				pcf50633_mbc_irq_names[i], mbc);
++		if (ret) {
++			dev_err(&pdev->dev, "Failed to request %s irq: %d\n",
++						pcf50633_mbc_irq_names[i], ret);
++			goto err_free_irq;
++		}
++	}
+ 
+ 	mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
+ 	if (mbcs1 & PCF50633_MBCS1_USBPRES)
+-		pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
++		pcf50633_mbc_irq_handler(mbc->irqs[PCF50633_MBC_IRQ_USBINS], mbc);
+ 	if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
+-		pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
++		pcf50633_mbc_irq_handler(mbc->irqs[PCF50633_MBC_IRQ_ADPINS], mbc);
++
++	pcf->mbc = mbc;
+ 
+ 	return 0;
++
++err_free_irq:
++	for (--i; i >= 0; --i)
++		free_irq(mbc->irqs[i], mbc);
++	sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
++err_unregister_ac:
++	power_supply_unregister(&mbc->ac);
++err_unregister_usb:
++	power_supply_unregister(&mbc->usb);
++err_unregister_adapter:
++	power_supply_unregister(&mbc->adapter);
++err_free:
++	kfree(mbc);
++
++	return ret;
+ }
+ 
+ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+@@ -452,9 +519,11 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+ 	struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
+ 	int i;
+ 
++	mbc->pcf->mbc = NULL;
++
+ 	/* Remove IRQ handlers */
+-	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+-		pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
++	for (i = PCF50633_MBC_NUM_IRQS - 1; i >= 0; --i)
++		free_irq(mbc->irqs[i], mbc);
+ 
+ 	sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
+ 	power_supply_unregister(&mbc->usb);
+diff --git a/drivers/power/platform_battery.c b/drivers/power/platform_battery.c
+new file mode 100644
+index 0000000..a5c9f35
+--- /dev/null
++++ b/drivers/power/platform_battery.c
+@@ -0,0 +1,120 @@
++/*
++ * Driver for platform battery
++ *
++ * Copyright (c) Paul Fertser <fercerpav@gmail.com>
++ * Inspired by Balaji Rao <balajirrao@openmoko.org>
++ *
++ * This driver can be used for dumb batteries when all knowledge about
++ * their state belongs to the platform that does necessary ADC readings,
++ * conversions, guessimations etc.
++ *
++ * Use consistent with the GNU GPL is permitted, provided that this
++ * copyright notice is preserved in its entirety in all copies and derived
++ * works.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#include <linux/delay.h>
++#include <linux/platform_battery.h>
++
++struct platform_battery {
++	struct power_supply psy;
++	struct platform_bat_platform_data *pdata;
++};
++
++static int platform_bat_get_property(struct power_supply *psy,
++				       enum power_supply_property psp,
++				       union power_supply_propval *val)
++{
++	struct platform_battery *bat =
++				container_of(psy, struct platform_battery, psy);
++	size_t i;
++	int present=1;
++
++	if (bat->pdata->is_present)
++		present = bat->pdata->is_present();
++
++	if (psp != POWER_SUPPLY_PROP_PRESENT && !present)
++		return -ENODEV;
++
++	for (i = 0; i < psy->num_properties; i++)
++		if (psy->properties[i] == psp) {
++			val->intval = bat->pdata->get_property[i]();
++			return 0;
++		}
++
++	return -EINVAL;
++}
++
++static void platform_bat_ext_changed(struct power_supply *psy)
++{
++	struct platform_battery *bat =
++				container_of(psy, struct platform_battery, psy);
++	power_supply_changed(&bat->psy);
++}
++
++static int platform_battery_probe(struct platform_device *pdev)
++{
++	struct platform_battery *platform_bat;
++	struct platform_bat_platform_data *pdata =
++		(struct platform_bat_platform_data *)pdev->dev.platform_data;
++
++	platform_bat = kzalloc(sizeof(*platform_bat), GFP_KERNEL);
++	if (!platform_bat)
++		return -ENOMEM;
++
++	if (pdata->name)
++		platform_bat->psy.name = pdata->name;
++	else
++		platform_bat->psy.name = dev_name(&pdev->dev);
++	platform_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
++	platform_bat->psy.properties = pdata->properties;
++	platform_bat->psy.num_properties = pdata->num_properties;
++	platform_bat->psy.get_property = platform_bat_get_property;
++	platform_bat->psy.external_power_changed = platform_bat_ext_changed;
++
++	platform_bat->pdata = pdata;
++	platform_set_drvdata(pdev, platform_bat);
++	power_supply_register(&pdev->dev, &platform_bat->psy);
++
++	return 0;
++}
++
++static int platform_battery_remove(struct platform_device *pdev)
++{
++	struct platform_battery *bat = platform_get_drvdata(pdev);
++
++	power_supply_unregister(&bat->psy);
++	kfree(bat);
++
++	return 0;
++}
++
++static struct platform_driver platform_battery_driver = {
++	.driver = {
++		.name = "platform_battery",
++	},
++	.probe	  = platform_battery_probe,
++	.remove   = platform_battery_remove,
++};
++
++static int __init platform_battery_init(void)
++{
++	return platform_driver_register(&platform_battery_driver);
++}
++module_init(platform_battery_init);
++
++static void __exit platform_battery_exit(void)
++{
++	platform_driver_unregister(&platform_battery_driver);
++}
++module_exit(platform_battery_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Paul Fertser <fercerpav@gmail.com>");
++MODULE_DESCRIPTION("platform battery driver");
+diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
+index 69a11d9..5e7deb5 100644
+--- a/drivers/regulator/pcf50633-regulator.c
++++ b/drivers/regulator/pcf50633-regulator.c
+@@ -316,11 +316,10 @@ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
+ 	struct regulator_dev *rdev;
+ 	struct pcf50633 *pcf;
+ 
+-	/* Already set by core driver */
+ 	pcf = dev_to_pcf50633(pdev->dev.parent);
+ 
+ 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
+-				  pdev->dev.platform_data, pcf);
++				  &pcf->pdata->reg_init_data[pdev->id], pcf);
+ 	if (IS_ERR(rdev))
+ 		return PTR_ERR(rdev);
+ 
+diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
+index f90c574..b0dc8c2 100644
+--- a/drivers/rtc/rtc-pcf50633.c
++++ b/drivers/rtc/rtc-pcf50633.c
+@@ -58,11 +58,12 @@ struct pcf50633_time {
+ 
+ struct pcf50633_rtc {
+ 	int alarm_enabled;
+-	int second_enabled;
+ 	int alarm_pending;
+ 
+ 	struct pcf50633 *pcf;
+ 	struct rtc_device *rtc_dev;
++
++	int irq_alarm;
+ };
+ 
+ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf)
+@@ -91,15 +92,11 @@ static int
+ pcf50633_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+ {
+ 	struct pcf50633_rtc *rtc = dev_get_drvdata(dev);
+-	int err;
+-
+-	if (enabled)
+-		err = pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+-	else
+-		err = pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+ 
+-	if (err < 0)
+-		return err;
++	if (enabled && !rtc->alarm_enabled)
++		enable_irq(rtc->irq_alarm);
++	else if (!enabled && rtc->alarm_enabled)
++		disable_irq(rtc->irq_alarm);
+ 
+ 	rtc->alarm_enabled = enabled;
+ 
+@@ -143,7 +140,7 @@ static int pcf50633_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ {
+ 	struct pcf50633_rtc *rtc;
+ 	struct pcf50633_time pcf_tm;
+-	int second_masked, alarm_masked, ret = 0;
++	int ret = 0;
+ 
+ 	rtc = dev_get_drvdata(dev);
+ 
+@@ -162,23 +159,16 @@ static int pcf50633_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ 		pcf_tm.time[PCF50633_TI_SEC]);
+ 
+ 
+-	second_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_SECOND);
+-	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+-
+-	if (!second_masked)
+-		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_SECOND);
+-	if (!alarm_masked)
+-		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
++	if (rtc->alarm_enabled)
++		disable_irq(rtc->irq_alarm);
+ 
+ 	/* Returns 0 on success */
+ 	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSC,
+ 					     PCF50633_TI_EXTENT,
+ 					     &pcf_tm.time[0]);
+ 
+-	if (!second_masked)
+-		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_SECOND);
+-	if (!alarm_masked)
+-		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
++	if (rtc->alarm_enabled)
++		enable_irq(rtc->irq_alarm);
+ 
+ 	return ret;
+ }
+@@ -210,7 +200,7 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+ {
+ 	struct pcf50633_rtc *rtc;
+ 	struct pcf50633_time pcf_tm;
+-	int alarm_masked, ret = 0;
++	int ret = 0;
+ 
+ 	rtc = dev_get_drvdata(dev);
+ 
+@@ -219,11 +209,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+ 	/* do like mktime does and ignore tm_wday */
+ 	pcf_tm.time[PCF50633_TI_WKDAY] = 7;
+ 
+-	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+-
+ 	/* disable alarm interrupt */
+-	if (!alarm_masked)
+-		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
++	if (rtc->alarm_enabled)
++		disable_irq(rtc->irq_alarm);
+ 
+ 	/* Returns 0 on success */
+ 	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+@@ -231,8 +219,8 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+ 	if (!alrm->enabled)
+ 		rtc->alarm_pending = 0;
+ 
+-	if (!alarm_masked || alrm->enabled)
+-		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
++	if (!rtc->alarm_enabled && alrm->enabled)
++		enable_irq(rtc->irq_alarm);
+ 	rtc->alarm_enabled = alrm->enabled;
+ 
+ 	return ret;
+@@ -246,24 +234,26 @@ static struct rtc_class_ops pcf50633_rtc_ops = {
+ 	.alarm_irq_enable	= pcf50633_rtc_alarm_irq_enable,
+ };
+ 
+-static void pcf50633_rtc_irq(int irq, void *data)
++static irqreturn_t pcf50633_rtc_alarm_irq(int irq, void *data)
+ {
+ 	struct pcf50633_rtc *rtc = data;
++	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++	rtc->alarm_pending = 1;
+ 
+-	switch (irq) {
+-	case PCF50633_IRQ_ALARM:
+-		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+-		rtc->alarm_pending = 1;
+-		break;
+-	case PCF50633_IRQ_SECOND:
+-		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+-		break;
+-	}
++	return IRQ_HANDLED;
+ }
+ 
+ static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
+ {
+ 	struct pcf50633_rtc *rtc;
++	int irq_alarm;
++	int ret;
++
++	irq_alarm = platform_get_irq_byname(pdev, "ALARM");
++	if (irq_alarm <= 0) {
++		dev_err(&pdev->dev, "Failed to get alarm irq: %d\n", irq_alarm);
++		return irq_alarm ?: -EINVAL;
++	}
+ 
+ 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ 	if (!rtc)
+@@ -280,12 +270,23 @@ static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
+ 		return ret;
+ 	}
+ 
+-	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM,
+-					pcf50633_rtc_irq, rtc);
+-	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_SECOND,
+-					pcf50633_rtc_irq, rtc);
++	ret = request_threaded_irq(irq_alarm, NULL, pcf50633_rtc_alarm_irq, 0,
++			"pcf50633-rtc alarm", rtc);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to request alarm irq: %d\n", ret);
++		goto err_free;
++	}
++	disable_irq(irq_alarm);
++
++	rtc->irq_alarm = irq_alarm;
+ 
+ 	return 0;
++
++err_free_irq:
++	free_irq(irq_alarm, rtc);
++err_free:
++	kfree(rtc);
++	return ret;
+ }
+ 
+ static int __devexit pcf50633_rtc_remove(struct platform_device *pdev)
+@@ -294,8 +295,7 @@ static int __devexit pcf50633_rtc_remove(struct platform_device *pdev)
+ 
+ 	rtc = platform_get_drvdata(pdev);
+ 
+-	pcf50633_free_irq(rtc->pcf, PCF50633_IRQ_ALARM);
+-	pcf50633_free_irq(rtc->pcf, PCF50633_IRQ_SECOND);
++	free_irq(rtc->irq_alarm, rtc);
+ 
+ 	rtc_device_unregister(rtc->rtc_dev);
+ 	kfree(rtc);
+diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
+index 9e2fa8d..318093c 100644
+--- a/drivers/tty/serial/samsung.c
++++ b/drivers/tty/serial/samsung.c
+@@ -1268,6 +1268,13 @@ module_exit(s3c24xx_serial_modexit);
+ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+ 
+ static struct uart_port *cons_uart;
++static int cons_silenced;
++
++void s3c24xx_serial_console_set_silence(int silenced)
++{
++	cons_silenced = silenced;
++}
++EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
+ 
+ static int
+ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+@@ -1292,9 +1299,21 @@ static void
+ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
+ {
+ 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
++	unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
++
++	if (cons_silenced)
++		return;
++
++	/* If auto HW flow control enabled, temporarily turn it off */
++	if (umcon & S3C2410_UMCOM_AFC)
++		wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
++
+ 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
+ 		barrier();
+ 	wr_regb(cons_uart, S3C2410_UTXH, ch);
++
++	if (umcon & S3C2410_UMCOM_AFC)
++		wr_regl(port, S3C2410_UMCON, umcon);
+ }
+ 
+ static void
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index e6a8d8c..03ff799 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -2341,6 +2341,23 @@ config FB_PUV3_UNIGFX
+ 	  Choose this option if you want to use the Unigfx device as a
+ 	  framebuffer device. Without the support of PCI & AGP.
+ 
++config FB_GLAMO
++	tristate "Smedia Glamo 336x/337x framebuffer support"
++	depends on FB && MFD_GLAMO
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Frame buffer driver for the LCD controller in the Smedia Glamo
++	  336x/337x.
++
++	  This driver is also available as a module ( = code which can be
++	  inserted and removed from the running kernel whenever you want). The
++	  module will be called glamofb. If you want to compile it as a module,
++	  say M here and read <file:Documentation/modules.txt>.
++
++	  If unsure, say N.
++
+ source "drivers/video/omap/Kconfig"
+ source "drivers/video/omap2/Kconfig"
+ 
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index 2ea44b6..c92cacf 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -140,6 +140,7 @@ obj-$(CONFIG_FB_MSM)              += msm/
+ obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
+ obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+ obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
++obj-$(CONFIG_FB_GLAMO)            += glamo-fb.o
+ 
+ # Platform or fallback drivers go here
+ obj-$(CONFIG_FB_UVESA)            += uvesafb.o
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 0c9373b..664509e 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -117,6 +117,20 @@ config LCD_LD9040
+ 	  If you have an LD9040 Panel, say Y to enable its
+ 	  control driver.
+ 
++config LCD_JBT6K74
++	tristate "TPO JBT6K74-AS TFT display ASIC control interface"
++	depends on SPI_MASTER && SYSFS && LCD_CLASS_DEVICE
++	help
++	  SPI driver for the control interface of TFT panels containing
++	  the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
++	  TFT diplay module used in the Openmoko Freerunner GSM phone.
++
++	  The control interface is required for display operation, as it
++	  controls power management, display timing and gamma calibration.
++
++	  This driver can also be build as a module, if so it will be called
++	  jbt6k74.
++
+ endif # LCD_CLASS_DEVICE
+ 
+ #
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index b9ca849..fe67e97 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_LCD_TDO24M)	   += tdo24m.o
+ obj-$(CONFIG_LCD_TOSA)		   += tosa_lcd.o
+ obj-$(CONFIG_LCD_S6E63M0)	+= s6e63m0.o
+ obj-$(CONFIG_LCD_LD9040)	+= ld9040.o
++obj-$(CONFIG_LCD_JBT6K74) 	   += jbt6k74.o
+ 
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
+diff --git a/drivers/video/backlight/jbt6k74.c b/drivers/video/backlight/jbt6k74.c
+new file mode 100644
+index 0000000..d53a366
+--- /dev/null
++++ b/drivers/video/backlight/jbt6k74.c
+@@ -0,0 +1,895 @@
++/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>,
++ *	Stefan Schmidt <stefan@openmoko.org>
++ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
++ * Copyright (C) 2009 by Lars-Peter Clausen <lars@metafoo.de>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++#include <linux/jbt6k74.h>
++#include <linux/fb.h>
++#include <linux/lcd.h>
++#include <linux/time.h>
++#include <linux/regulator/consumer.h>
++#include <linux/gpio.h>
++
++enum jbt6k74_register {
++	JBT_REG_SLEEP_IN		= 0x10,
++	JBT_REG_SLEEP_OUT		= 0x11,
++
++	JBT_REG_DISPLAY_OFF		= 0x28,
++	JBT_REG_DISPLAY_ON		= 0x29,
++
++	JBT_REG_RGB_FORMAT		= 0x3a,
++	JBT_REG_QUAD_RATE		= 0x3b,
++
++	JBT_REG_POWER_ON_OFF		= 0xb0,
++	JBT_REG_BOOSTER_OP		= 0xb1,
++	JBT_REG_BOOSTER_MODE		= 0xb2,
++	JBT_REG_BOOSTER_FREQ		= 0xb3,
++	JBT_REG_OPAMP_SYSCLK		= 0xb4,
++	JBT_REG_VSC_VOLTAGE		= 0xb5,
++	JBT_REG_VCOM_VOLTAGE		= 0xb6,
++	JBT_REG_EXT_DISPL		= 0xb7,
++	JBT_REG_OUTPUT_CONTROL		= 0xb8,
++	JBT_REG_DCCLK_DCEV		= 0xb9,
++	JBT_REG_DISPLAY_MODE1		= 0xba,
++	JBT_REG_DISPLAY_MODE2		= 0xbb,
++	JBT_REG_DISPLAY_MODE		= 0xbc,
++	JBT_REG_ASW_SLEW		= 0xbd,
++	JBT_REG_DUMMY_DISPLAY		= 0xbe,
++	JBT_REG_DRIVE_SYSTEM		= 0xbf,
++
++	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
++	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
++	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
++	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
++	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
++	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
++	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
++
++	JBT_REG_GAMMA1_FINE_1		= 0xc7,
++	JBT_REG_GAMMA1_FINE_2		= 0xc8,
++	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
++	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
++
++	/* VGA */
++	JBT_REG_BLANK_CONTROL		= 0xcf,
++	JBT_REG_BLANK_TH_TV		= 0xd0,
++	JBT_REG_CKV_ON_OFF		= 0xd1,
++	JBT_REG_CKV_1_2			= 0xd2,
++	JBT_REG_OEV_TIMING		= 0xd3,
++	JBT_REG_ASW_TIMING_1		= 0xd4,
++	JBT_REG_ASW_TIMING_2		= 0xd5,
++
++	/* QVGA */
++	JBT_REG_BLANK_CONTROL_QVGA	= 0xd6,
++	JBT_REG_BLANK_TH_TV_QVGA	= 0xd7,
++	JBT_REG_CKV_ON_OFF_QVGA		= 0xd8,
++	JBT_REG_CKV_1_2_QVGA		= 0xd9,
++	JBT_REG_OEV_TIMING_QVGA		= 0xde,
++	JBT_REG_ASW_TIMING_1_QVGA	= 0xdf,
++	JBT_REG_ASW_TIMING_2_QVGA	= 0xe0,
++
++
++	JBT_REG_HCLOCK_VGA		= 0xec,
++	JBT_REG_HCLOCK_QVGA		= 0xed,
++};
++
++enum jbt6k74_resolution {
++	JBT_RESOLUTION_VGA,
++	JBT_RESOLUTION_QVGA,
++};
++
++enum jbt6k74_power_mode {
++	JBT_POWER_MODE_DEEP_STANDBY,
++	JBT_POWER_MODE_SLEEP,
++	JBT_POWER_MODE_NORMAL,
++};
++
++static const char * const jbt6k74_power_mode_names[] = {
++	[JBT_POWER_MODE_DEEP_STANDBY]	= "deep-standby",
++	[JBT_POWER_MODE_SLEEP]		= "sleep",
++	[JBT_POWER_MODE_NORMAL]		= "normal",
++};
++
++static const char * const jbt6k74_resolution_names[] = {
++	[JBT_RESOLUTION_VGA] = "vga",
++	[JBT_RESOLUTION_QVGA] = "qvga",
++};
++
++struct jbt6k74_info {
++	struct mutex lock;		/* protects this structure */
++	enum jbt6k74_resolution resolution;
++	enum jbt6k74_power_mode power_mode;
++	enum jbt6k74_power_mode suspend_mode;
++	int suspended;
++
++	struct spi_device *spi;
++	struct lcd_device *lcd_dev;
++
++	unsigned long next_sleep;
++	struct delayed_work blank_work;
++	int blank_mode;
++	struct regulator_bulk_data supplies[2];
++	uint16_t tx_buf[3];
++	uint16_t reg_cache[0xEE];
++};
++
++#define JBT_COMMAND	0x000
++#define JBT_DATA	0x100
++
++static int jbt6k74_reg_write_nodata(struct jbt6k74_info *jbt, uint8_t reg)
++{
++	int ret;
++
++	jbt->tx_buf[0] = JBT_COMMAND | reg;
++	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
++					sizeof(uint16_t));
++	if (ret == 0)
++		jbt->reg_cache[reg] = 0;
++	else
++		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
++
++	return ret;
++}
++
++
++static int jbt6k74_reg_write(struct jbt6k74_info *jbt, uint8_t reg, uint8_t data)
++{
++	int ret;
++
++	jbt->tx_buf[0] = JBT_COMMAND | reg;
++	jbt->tx_buf[1] = JBT_DATA | data;
++	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
++			2*sizeof(uint16_t));
++	if (ret == 0)
++		jbt->reg_cache[reg] = data;
++	else
++		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
++
++	return ret;
++}
++
++static int jbt6k74_reg_write16(struct jbt6k74_info *jbt, uint8_t reg, uint16_t data)
++{
++	int ret;
++
++	jbt->tx_buf[0] = JBT_COMMAND | reg;
++	jbt->tx_buf[1] = JBT_DATA | (data >> 8);
++	jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
++
++	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
++			3*sizeof(uint16_t));
++	if (ret == 0)
++		jbt->reg_cache[reg] = data;
++	else
++		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
++
++	return ret;
++}
++
++static int jbt6k74_init_regs(struct jbt6k74_info *jbt)
++{
++	int ret;
++
++	dev_dbg(&jbt->spi->dev, "entering %cVGA mode\n",
++			jbt->resolution == JBT_RESOLUTION_QVGA ? 'Q' : ' ');
++
++	ret = jbt6k74_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
++	/*
++	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
++	 * to avoid red / blue flicker
++	 */
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_ASW_SLEW, 0x00 | (1 << 5));
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
++
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
++
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
++
++	if (jbt->resolution != JBT_RESOLUTION_QVGA) {
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
++
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
++
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
++	} else {
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
++
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
++
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
++		ret |= jbt6k74_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
++	}
++
++	return ret ? -EIO : 0;
++}
++
++static int jbt6k74_standby_to_sleep(struct jbt6k74_info *jbt)
++{
++	int ret;
++	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
++
++	ret = regulator_bulk_enable(ARRAY_SIZE(jbt->supplies), jbt->supplies);
++	if (ret)
++		return ret;
++
++	gpio_set_value_cansleep(pdata->gpio_reset, 1);
++	mdelay(100);
++
++	/* three times command zero */
++	ret |= jbt6k74_reg_write_nodata(jbt, 0x00);
++	mdelay(1);
++	ret |= jbt6k74_reg_write_nodata(jbt, 0x00);
++	mdelay(1);
++	ret |= jbt6k74_reg_write_nodata(jbt, 0x00);
++	mdelay(1);
++
++	/* deep standby out */
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
++	mdelay(1);
++	ret = jbt6k74_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
++
++	/* (re)initialize register set */
++	ret |= jbt6k74_init_regs(jbt);
++
++	return ret ? -EIO : 0;
++}
++
++static int jbt6k74_sleep_to_normal(struct jbt6k74_info *jbt)
++{
++	int ret;
++
++	/* Make sure we are 120 ms after SLEEP_OUT */
++	if (time_before(jiffies, jbt->next_sleep))
++		mdelay(jiffies_to_msecs(jbt->next_sleep - jiffies));
++
++	if (jbt->resolution == JBT_RESOLUTION_VGA) {
++		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++		ret = jbt6k74_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
++
++		/* Quad mode off */
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
++	} else {
++		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++		ret = jbt6k74_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
++
++		/* Quad mode on */
++		ret |= jbt6k74_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
++	}
++
++	/* AVDD on, XVDD on */
++	ret |= jbt6k74_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
++
++	/* Output control */
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xdff9);
++
++	/* Turn on display */
++	ret |= jbt6k74_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
++
++	/* Sleep mode off */
++	ret |= jbt6k74_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
++	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
++
++	/* Allow the booster and display controller to restart stably */
++	mdelay(5);
++
++	return ret ? -EIO : 0;
++}
++
++static int jbt6k74_normal_to_sleep(struct jbt6k74_info *jbt)
++{
++	int ret;
++
++	/* Make sure we are 120 ms after SLEEP_OUT */
++	if (time_before(jiffies, jbt->next_sleep))
++		mdelay(jiffies_to_msecs(jbt->next_sleep - jiffies));
++
++	ret = jbt6k74_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++	ret |= jbt6k74_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8000 | 1 << 3);
++	ret |= jbt6k74_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
++	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
++
++	/* Allow the internal circuits to stop automatically */
++	mdelay(5);
++
++	return ret ? -EIO : 0;
++}
++
++static int jbt6k74_sleep_to_standby(struct jbt6k74_info *jbt)
++{
++	int ret;
++	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
++
++	ret = jbt6k74_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
++
++	if (!ret) {
++		gpio_set_value_cansleep(pdata->gpio_reset, 0);
++		ret = regulator_bulk_disable(ARRAY_SIZE(jbt->supplies),
++			jbt->supplies);
++	}
++
++	return ret;
++}
++
++static int jbt6k74_enter_power_mode(struct jbt6k74_info *jbt,
++					enum jbt6k74_power_mode new_mode)
++{
++	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
++	int ret = -EINVAL;
++
++	dev_dbg(&jbt->spi->dev, "entering (old_state=%s, new_state=%s)\n",
++			jbt6k74_power_mode_names[jbt->power_mode],
++			jbt6k74_power_mode_names[new_mode]);
++
++	mutex_lock(&jbt->lock);
++
++	if (jbt->suspended) {
++		switch (new_mode) {
++		case JBT_POWER_MODE_DEEP_STANDBY:
++		case JBT_POWER_MODE_SLEEP:
++		case JBT_POWER_MODE_NORMAL:
++			ret = 0;
++			jbt->suspend_mode = new_mode;
++			break;
++		default:
++			break;
++		}
++	} else if (new_mode == JBT_POWER_MODE_NORMAL &&
++			pdata->enable_pixel_clock) {
++		pdata->enable_pixel_clock(&jbt->spi->dev, 1);
++	}
++
++	switch (jbt->power_mode) {
++	case JBT_POWER_MODE_DEEP_STANDBY:
++		switch (new_mode) {
++		case JBT_POWER_MODE_DEEP_STANDBY:
++			ret = 0;
++			break;
++		case JBT_POWER_MODE_SLEEP:
++			ret = jbt6k74_standby_to_sleep(jbt);
++			break;
++		case JBT_POWER_MODE_NORMAL:
++			/* first transition into sleep */
++			ret = jbt6k74_standby_to_sleep(jbt);
++			/* then transition into normal */
++			ret |= jbt6k74_sleep_to_normal(jbt);
++			break;
++		}
++		break;
++	case JBT_POWER_MODE_SLEEP:
++		switch (new_mode) {
++		case JBT_POWER_MODE_SLEEP:
++			ret = 0;
++			break;
++		case JBT_POWER_MODE_DEEP_STANDBY:
++			ret = jbt6k74_sleep_to_standby(jbt);
++			break;
++		case JBT_POWER_MODE_NORMAL:
++			ret = jbt6k74_sleep_to_normal(jbt);
++			break;
++		}
++		break;
++	case JBT_POWER_MODE_NORMAL:
++		switch (new_mode) {
++		case JBT_POWER_MODE_NORMAL:
++			ret = 0;
++			break;
++		case JBT_POWER_MODE_DEEP_STANDBY:
++			/* first transition into sleep */
++			ret = jbt6k74_normal_to_sleep(jbt);
++			/* then transition into deep standby */
++			ret |= jbt6k74_sleep_to_standby(jbt);
++			break;
++		case JBT_POWER_MODE_SLEEP:
++			ret = jbt6k74_normal_to_sleep(jbt);
++			break;
++		}
++	}
++
++	if (ret == 0) {
++		jbt->power_mode = new_mode;
++		if (new_mode != JBT_POWER_MODE_NORMAL &&
++			pdata->enable_pixel_clock)
++			pdata->enable_pixel_clock(&jbt->spi->dev, 0);
++	} else {
++		dev_err(&jbt->spi->dev, "Failed enter state '%s': %d\n",
++				jbt6k74_power_mode_names[new_mode], ret);
++	}
++
++	mutex_unlock(&jbt->lock);
++
++	return ret;
++}
++
++static int jbt6k74_set_resolution(struct jbt6k74_info *jbt,
++					enum jbt6k74_resolution new_resolution)
++{
++	int ret = 0;
++	enum jbt6k74_resolution old_resolution;
++
++	mutex_lock(&jbt->lock);
++
++	if (jbt->resolution == new_resolution)
++		goto out_unlock;
++
++	old_resolution = jbt->resolution;
++	jbt->resolution = new_resolution;
++
++	if (jbt->power_mode == JBT_POWER_MODE_NORMAL) {
++
++		/* first transition into sleep */
++		ret = jbt6k74_normal_to_sleep(jbt);
++		ret |= jbt6k74_sleep_to_normal(jbt);
++
++		if (ret) {
++			jbt->resolution = old_resolution;
++			dev_err(&jbt->spi->dev, "Failed to set resolution '%s')\n",
++				jbt6k74_resolution_names[new_resolution]);
++		}
++	}
++
++out_unlock:
++	mutex_unlock(&jbt->lock);
++
++	return ret;
++}
++
++static ssize_t resolution_read(struct device *dev,
++				struct device_attribute *attr, char *buf)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(dev);
++
++	if (jbt->resolution >= ARRAY_SIZE(jbt6k74_resolution_names))
++		return -EIO;
++
++	return sprintf(buf, "%s\n", jbt6k74_resolution_names[jbt->resolution]);
++}
++
++static ssize_t resolution_write(struct device *dev,
++				struct device_attribute *attr,
++				const char *buf, size_t count)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(dev);
++	int i, ret;
++
++	for (i = 0; i < ARRAY_SIZE(jbt6k74_resolution_names); i++) {
++		if (!strncmp(buf, jbt6k74_resolution_names[i],
++			strlen(jbt6k74_resolution_names[i]))) {
++			ret = jbt6k74_set_resolution(jbt, i);
++			if (ret)
++				return ret;
++			return count;
++		}
++	}
++
++	return -EINVAL;
++}
++
++static DEVICE_ATTR(resolution, 0644, resolution_read, resolution_write);
++
++static int reg_by_string(const char *name)
++{
++	if (!strcmp(name, "gamma_fine1"))
++		return JBT_REG_GAMMA1_FINE_1;
++	else if (!strcmp(name, "gamma_fine2"))
++		return JBT_REG_GAMMA1_FINE_2;
++	else if (!strcmp(name, "gamma_inclination"))
++		return JBT_REG_GAMMA1_INCLINATION;
++	else
++		return JBT_REG_GAMMA1_BLUE_OFFSET;
++}
++
++static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
++			  char *buf)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(dev);
++	int reg = reg_by_string(attr->attr.name);
++	uint16_t val;
++
++	mutex_lock(&jbt->lock);
++	val = jbt->reg_cache[reg];
++	mutex_unlock(&jbt->lock);
++
++	return sprintf(buf, "0x%04x\n", val);
++}
++
++static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
++			   const char *buf, size_t count)
++{
++	int ret;
++	struct jbt6k74_info *jbt = dev_get_drvdata(dev);
++	int reg = reg_by_string(attr->attr.name);
++	unsigned long val;
++
++	ret = strict_strtoul(buf, 10, &val);
++	if (ret)
++		return ret;
++
++	mutex_lock(&jbt->lock);
++	jbt6k74_reg_write(jbt, reg, val & 0xff);
++	mutex_unlock(&jbt->lock);
++
++	return count;
++}
++
++static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
++			   const char *buf, size_t count)
++{
++	int ret;
++	struct jbt6k74_info *jbt = dev_get_drvdata(dev);
++	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
++	enum jbt6k74_power_mode old_power_mode = jbt->power_mode;
++
++	mutex_lock(&jbt->lock);
++
++	if (gpio_is_valid(pdata->gpio_reset)) {
++		/* hard reset the jbt6k74 */
++		gpio_set_value_cansleep(pdata->gpio_reset, 0);
++		mdelay(120);
++		gpio_set_value_cansleep(pdata->gpio_reset, 1);
++		mdelay(120);
++	}
++
++	ret = jbt6k74_reg_write_nodata(jbt, 0x01);
++	if (ret < 0)
++		dev_err(&jbt->spi->dev, "cannot soft reset\n");
++	mdelay(120);
++
++	mutex_unlock(&jbt->lock);
++
++	jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
++	jbt6k74_enter_power_mode(jbt, old_power_mode);
++
++	return count;
++}
++
++static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(reset, 0600, NULL, reset_write);
++
++static struct attribute *jbt6k74_sysfs_entries[] = {
++	&dev_attr_resolution.attr,
++	&dev_attr_gamma_fine1.attr,
++	&dev_attr_gamma_fine2.attr,
++	&dev_attr_gamma_inclination.attr,
++	&dev_attr_gamma_blue_offset.attr,
++	&dev_attr_reset.attr,
++	NULL,
++};
++
++static struct attribute_group jbt6k74_attr_group = {
++	.name	= NULL,
++	.attrs	= jbt6k74_sysfs_entries,
++};
++
++/* FIXME: This in an ugly hack to delay display blanking.
++  When the jbt is in sleep mode it displays an all white screen and thus one
++  will a see a short flash.
++  By delaying the blanking we will give the backlight a chance to turn off and
++  thus avoid getting the flash */
++static void jbt6k74_blank_worker(struct work_struct *work)
++{
++	struct jbt6k74_info *jbt  = container_of(work, struct jbt6k74_info,
++						blank_work.work);
++
++	switch (jbt->blank_mode) {
++	case FB_BLANK_NORMAL:
++		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
++		break;
++	case FB_BLANK_POWERDOWN:
++		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
++		break;
++	default:
++		break;
++	}
++}
++
++static int jbt6k74_set_mode(struct lcd_device *ld, struct fb_videomode *m)
++{
++	int ret = -EINVAL;
++	struct jbt6k74_info *jbt = dev_get_drvdata(&ld->dev);
++
++	if (m->xres == 240 && m->yres == 320) {
++		ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_QVGA);
++	} else if (m->xres == 480 && m->yres == 640) {
++		ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_VGA);
++	} else {
++		dev_err(&jbt->spi->dev, "Unknown resolution.\n");
++		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
++	}
++
++	return ret;
++}
++
++static int jbt6k74_set_power(struct lcd_device *ld, int power)
++{
++	int ret = -EINVAL;
++	struct jbt6k74_info *jbt = dev_get_drvdata(&ld->dev);
++
++	jbt->blank_mode = power;
++	cancel_rearming_delayed_work(&jbt->blank_work);
++
++	switch (power) {
++	case FB_BLANK_UNBLANK:
++		dev_dbg(&jbt->spi->dev, "unblank\n");
++		mdelay(20);
++		ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
++		break;
++	case FB_BLANK_NORMAL:
++		dev_dbg(&jbt->spi->dev, "blank\n");
++		ret = schedule_delayed_work(&jbt->blank_work, HZ);
++		break;
++	case FB_BLANK_POWERDOWN:
++		dev_dbg(&jbt->spi->dev, "powerdown\n");
++		ret = schedule_delayed_work(&jbt->blank_work, HZ);
++		break;
++	default:
++		break;
++	}
++
++	return ret;
++}
++
++static int jbt6k74_get_power(struct lcd_device *ld)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(&ld->dev);
++
++	switch (jbt->power_mode) {
++	case JBT_POWER_MODE_NORMAL:
++		return FB_BLANK_UNBLANK;
++	case JBT_POWER_MODE_SLEEP:
++		return FB_BLANK_NORMAL;
++	default:
++		return JBT_POWER_MODE_DEEP_STANDBY;
++	}
++}
++
++static struct lcd_ops jbt6k74_lcd_ops = {
++	.set_power = jbt6k74_set_power,
++	.get_power = jbt6k74_get_power,
++	.set_mode  = jbt6k74_set_mode,
++};
++
++/* linux device model infrastructure */
++
++static int __devinit jbt6k74_probe(struct spi_device *spi)
++{
++	int ret;
++	struct jbt6k74_info *jbt;
++	struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
++
++	/* the controller doesn't have a MISO pin; we can't do detection */
++
++	spi->mode = SPI_CPOL | SPI_CPHA;
++	spi->bits_per_word = 9;
++
++	ret = spi_setup(spi);
++	if (ret < 0) {
++		dev_err(&spi->dev,
++			"Failed to setup spi\n");
++		return ret;
++	}
++
++	jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
++	if (!jbt)
++		return -ENOMEM;
++
++	jbt->spi = spi;
++
++	jbt->lcd_dev = lcd_device_register("jbt6k74-lcd", &spi->dev, jbt,
++						&jbt6k74_lcd_ops);
++
++	if (IS_ERR(jbt->lcd_dev)) {
++		ret = PTR_ERR(jbt->lcd_dev);
++		goto err_free_drvdata;
++	}
++
++	INIT_DELAYED_WORK(&jbt->blank_work, jbt6k74_blank_worker);
++
++	jbt->resolution = JBT_RESOLUTION_VGA;
++	jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
++	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
++	mutex_init(&jbt->lock);
++
++	dev_set_drvdata(&spi->dev, jbt);
++
++	jbt->supplies[0].supply = "VDC";
++	jbt->supplies[1].supply = "VDDIO";
++
++	ret = regulator_bulk_get(&spi->dev, ARRAY_SIZE(jbt->supplies),
++					jbt->supplies);
++	if (ret) {
++		dev_err(&spi->dev, "Failed to power get supplies: %d\n", ret);
++		goto err_unregister_lcd;
++	}
++
++	if (gpio_is_valid(pdata->gpio_reset)) {
++		ret = gpio_request(pdata->gpio_reset, "jbt6k74 reset");
++		if (ret) {
++			dev_err(&spi->dev, "Failed to request reset gpio: %d\n",
++				ret);
++			goto err_free_supplies;
++		}
++
++		ret = gpio_direction_output(pdata->gpio_reset, 1);
++		if (ret) {
++			dev_err(&spi->dev, "Failed to set reset gpio direction: %d\n",
++				ret);
++			goto err_gpio_free;
++		}
++	}
++
++	ret = sysfs_create_group(&spi->dev.kobj, &jbt6k74_attr_group);
++	if (ret < 0) {
++		dev_err(&spi->dev, "cannot create sysfs group\n");
++		goto err_gpio_free;
++	}
++
++	mdelay(50);
++	ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
++	if (ret < 0) {
++		dev_err(&spi->dev, "cannot enter NORMAL state\n");
++		goto err_sysfs_remove;
++	}
++
++	return 0;
++
++err_sysfs_remove:
++	sysfs_remove_group(&spi->dev.kobj, &jbt6k74_attr_group);
++err_gpio_free:
++	gpio_free(pdata->gpio_reset);
++err_free_supplies:
++	regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
++err_unregister_lcd:
++	lcd_device_unregister(jbt->lcd_dev);
++err_free_drvdata:
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(jbt);
++
++	return ret;
++}
++
++static int __devexit jbt6k74_remove(struct spi_device *spi)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(&spi->dev);
++	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
++
++	/* We don't want to switch off the display in case the user
++	 * accidentially unloads the module (whose use count normally is 0) */
++	jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
++
++	sysfs_remove_group(&spi->dev.kobj, &jbt6k74_attr_group);
++
++	if (gpio_is_valid(pdata->gpio_reset))
++		gpio_free(pdata->gpio_reset);
++
++	lcd_device_unregister(jbt->lcd_dev);
++
++	dev_set_drvdata(&spi->dev, NULL);
++
++	regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
++	kfree(jbt);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int jbt6k74_suspend(struct spi_device *spi, pm_message_t state)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(&spi->dev);
++
++	jbt->suspend_mode = jbt->power_mode;
++
++	jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
++	jbt->suspended = 1;
++
++	dev_info(&spi->dev, "suspended\n");
++
++	return 0;
++}
++
++static int jbt6k74_resume(struct spi_device *spi)
++{
++	struct jbt6k74_info *jbt = dev_get_drvdata(&spi->dev);
++	dev_info(&spi->dev, "starting resume: %d\n", jbt->suspend_mode);
++
++	mdelay(20);
++
++	jbt->suspended = 0;
++	jbt6k74_enter_power_mode(jbt, jbt->suspend_mode);
++
++	dev_info(&spi->dev, "resumed: %d\n", jbt->suspend_mode);
++
++	return 0;
++}
++
++#else
++#define jbt6k74_suspend	NULL
++#define jbt6k74_resume	NULL
++#endif
++
++static struct spi_driver jbt6k74_driver = {
++	.driver = {
++		.name	= "jbt6k74",
++		.owner	= THIS_MODULE,
++	},
++
++	.probe	 = jbt6k74_probe,
++	.remove	 = __devexit_p(jbt6k74_remove),
++	.suspend = jbt6k74_suspend,
++	.resume	 = jbt6k74_resume,
++};
++
++static int __init jbt6k74_init(void)
++{
++	return spi_register_driver(&jbt6k74_driver);
++}
++module_init(jbt6k74_init);
++
++static void __exit jbt6k74_exit(void)
++{
++	spi_unregister_driver(&jbt6k74_driver);
++}
++module_exit(jbt6k74_exit);
++
++MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
+index ef5628d..7d80574 100644
+--- a/drivers/video/backlight/pcf50633-backlight.c
++++ b/drivers/video/backlight/pcf50633-backlight.c
+@@ -44,7 +44,7 @@ struct pcf50633_bl {
+  */
+ int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit)
+ {
+-	struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev);
++	struct pcf50633_bl *pcf_bl = pcf->bl;
+ 
+ 	if (!pcf_bl)
+ 		return -ENODEV;
+@@ -102,6 +102,7 @@ static const struct backlight_ops pcf50633_bl_ops = {
+ static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+ {
+ 	int ret;
++	struct pcf50633 *pcf = dev_to_pcf50633(pdev->dev.parent);
+ 	struct pcf50633_bl *pcf_bl;
+ 	struct device *parent = pdev->dev.parent;
+ 	struct pcf50633_platform_data *pcf50633_data = parent->platform_data;
+@@ -124,7 +125,7 @@ static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+ 		pcf_bl->brightness_limit = 0x3f;
+ 	}
+ 
+-	pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent);
++	pcf_bl->pcf = pcf;
+ 
+ 	pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
+ 						&pcf50633_bl_ops, &bl_props);
+@@ -134,6 +135,7 @@ static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+ 		goto err_free;
+ 	}
+ 
++	pcf->bl = pcf_bl;
+ 	platform_set_drvdata(pdev, pcf_bl);
+ 
+ 	pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time);
+@@ -156,6 +158,8 @@ static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+ {
+ 	struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
+ 
++	pcf_bl->pcf->bl = NULL;
++
+ 	backlight_device_unregister(pcf_bl->bl);
+ 
+ 	platform_set_drvdata(pdev, NULL);
+diff --git a/drivers/video/glamo-fb.c b/drivers/video/glamo-fb.c
+new file mode 100644
+index 0000000..45f5a2b
+--- /dev/null
++++ b/drivers/video/glamo-fb.c
+@@ -0,0 +1,943 @@
++/* Smedia Glamo 336x/337x driver
++ *
++ * (C) 2007-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/console.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/io.h>
++#include <linux/mfd/glamo.h>
++#include <linux/mfd/glamo-core.h>
++#include <linux/mfd/glamo-regs.h>
++
++#include <asm/div64.h>
++
++#ifdef CONFIG_PM
++#include <linux/pm.h>
++#endif
++
++#include <linux/glamofb.h>
++
++struct glamofb_handle {
++	struct glamo_core *core;
++	struct fb_info *fb;
++	struct device *dev;
++
++	struct resource *reg;
++	struct resource *fb_res;
++	void __iomem *base;
++	void __iomem *cursor_addr;
++
++	struct glamo_fb_platform_data *mach_info;
++
++	int cursor_on;
++	int blank_mode;
++	int mode_set; /* 0 if the current display mode hasn't been set on the glamo */
++	int output_enabled; /* 0 if the video output is disabled */
++
++	spinlock_t lock_cmd;
++	uint32_t pseudo_pal[16];
++};
++
++static void glamofb_program_mode(struct glamofb_handle *glamo);
++
++static void glamo_output_enable(struct glamofb_handle *gfb)
++{
++	struct glamo_core *gcore = gfb->core;
++
++	if (gfb->output_enabled)
++		return;
++
++	/* enable the pixel clock if off */
++	glamo_engine_enable(gcore, GLAMO_ENGINE_LCD);
++
++	gfb->output_enabled = 1;
++	if (!gfb->mode_set)
++		glamofb_program_mode(gfb);
++}
++
++static void glamo_output_disable(struct glamofb_handle *gfb)
++{
++	struct glamo_core *gcore = gfb->core;
++
++	if (!gfb->output_enabled)
++		return;
++
++	/* enable the pixel clock if off */
++	glamo_engine_suspend(gcore, GLAMO_ENGINE_LCD);
++
++	gfb->output_enabled = 0;
++}
++
++
++static inline int glamofb_reg_read(struct glamofb_handle *glamo, uint16_t reg)
++{
++	return readw(glamo->base + reg);
++}
++
++static inline void glamofb_reg_write(struct glamofb_handle *glamo, uint16_t reg,
++	uint16_t val)
++{
++	writew(val, glamo->base + reg);
++}
++
++static const struct glamo_script glamo_regs[] = {
++	{ GLAMO_REG_LCD_MODE1, 0x0020 },
++	/* no display rotation, no hardware cursor, no dither, no gamma,
++	 * no retrace flip, vsync low-active, hsync low active,
++	 * no TVCLK, no partial display, hw dest color from fb,
++	 * no partial display mode, LCD1, software flip,  */
++	{ GLAMO_REG_LCD_MODE2, 0x9020 },
++	  /* video flip, no ptr, no ptr, dhclk off,
++	   * normal mode,  no cpuif,
++	   * res, serial msb first, single fb, no fr ctrl,
++	   * cpu if bits all zero, no crc
++	   * 0000 0000 0010  0000 */
++	{ GLAMO_REG_LCD_MODE3, 0x0b40 },
++	  /* src data rgb565, res, 18bit rgb666
++	   * 000 01 011 0100 0000 */
++	{ GLAMO_REG_LCD_POLARITY, 0x440c },
++	  /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
++	   * np cpu if, 9bit serial data, sclk rising edge latch data
++	   * 01 00 0 100 0 000 01 0 0 */
++	/* The following values assume 640*480@16bpp */
++	{ GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
++	{ GLAMO_REG_LCD_A_BASE2, 0x4000 }, /* display A base address 22:16 */
++	{ GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
++	{ GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
++	{ GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
++};
++
++static int glamofb_run_script(struct glamofb_handle *glamo,
++	const struct glamo_script *script, size_t len)
++{
++	size_t i;
++
++	for (i = 0; i < len; i++) {
++		const struct glamo_script *line = &script[i];
++
++		if (line->reg == 0xffff)
++			return 0;
++		else if (line->reg == 0xfffe)
++			msleep(line->val);
++		else
++			glamofb_reg_write(glamo, script[i].reg, script[i].val);
++	}
++
++	return 0;
++}
++
++static int glamofb_check_var(struct fb_var_screeninfo *var,
++	struct fb_info *info)
++{
++	struct glamofb_handle *glamo = info->par;
++
++	if (var->bits_per_pixel != 16)
++		var->bits_per_pixel = 16;
++
++	var->height = glamo->mach_info->height;
++	var->width = glamo->mach_info->width;
++
++	/* FIXME: set rgb positions */
++	switch (var->bits_per_pixel) {
++	case 16:
++		switch (glamofb_reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
++		case GLAMO_LCD_SRC_RGB565:
++			var->red.offset		= 11;
++			var->green.offset	= 5;
++			var->blue.offset	= 0;
++			var->red.length		= 5;
++			var->green.length	= 6;
++			var->blue.length	= 5;
++			var->transp.length	= 0;
++			break;
++		case GLAMO_LCD_SRC_ARGB1555:
++			var->transp.offset	= 15;
++			var->red.offset		= 10;
++			var->green.offset	= 5;
++			var->blue.offset	= 0;
++			var->transp.length	= 1;
++			var->red.length		= 5;
++			var->green.length	= 5;
++			var->blue.length	= 5;
++			break;
++		case GLAMO_LCD_SRC_ARGB4444:
++			var->transp.offset	= 12;
++			var->red.offset		= 8;
++			var->green.offset	= 4;
++			var->blue.offset	= 0;
++			var->transp.length	= 4;
++			var->red.length		= 4;
++			var->green.length	= 4;
++			var->blue.length	= 4;
++			break;
++		}
++		break;
++	case 24:
++	case 32:
++	default:
++		/* The Smedia Glamo doesn't support anything but 16bit color */
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static void glamofb_reg_set_bit_mask(struct glamofb_handle *glamo, uint16_t reg,
++	uint16_t mask, uint16_t val)
++{
++	uint16_t tmp;
++
++	val &= mask;
++
++	tmp = glamofb_reg_read(glamo, reg);
++	tmp &= ~mask;
++	tmp |= val;
++	glamofb_reg_write(glamo, reg, tmp);
++}
++
++#define GLAMO_LCD_WIDTH_MASK 0x03FF
++#define GLAMO_LCD_HEIGHT_MASK 0x03FF
++#define GLAMO_LCD_PITCH_MASK 0x07FE
++#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
++
++/* the caller has to ensure lock_cmd is held and we are in cmd mode */
++static void __rotate_lcd(struct glamofb_handle *glamo, uint32_t rotation)
++{
++	uint32_t glamo_rot;
++
++	switch (rotation) {
++	case FB_ROTATE_CW:
++		glamo_rot = GLAMO_LCD_ROT_MODE_90;
++		break;
++	case FB_ROTATE_UD:
++		glamo_rot = GLAMO_LCD_ROT_MODE_180;
++		break;
++	case FB_ROTATE_CCW:
++		glamo_rot = GLAMO_LCD_ROT_MODE_270;
++		break;
++	default:
++		glamo_rot = GLAMO_LCD_ROT_MODE_0;
++		break;
++	}
++
++	glamofb_reg_set_bit_mask(glamo,
++			 GLAMO_REG_LCD_WIDTH,
++			 GLAMO_LCD_ROT_MODE_MASK,
++			 glamo_rot);
++	glamofb_reg_set_bit_mask(glamo,
++			 GLAMO_REG_LCD_MODE1,
++			 GLAMO_LCD_MODE1_ROTATE_EN,
++			 (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
++				 GLAMO_LCD_MODE1_ROTATE_EN : 0);
++}
++
++static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
++{
++	/* DGCMdQempty -- 1 == command queue is empty */
++	return glamofb_reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
++}
++
++/* call holding gfb->lock_cmd  when locking, until you unlock */
++static int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
++{
++	int timeout = 2000000;
++
++	dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
++	if (on) {
++		dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
++			__func__);
++		while (!glamofb_cmdq_empty(gfb) && (timeout--))
++			cpu_relax();
++		if (timeout < 0) {
++			printk(KERN_ERR "glamofb cmd_queue never got empty\n");
++			return -EIO;
++		}
++		dev_dbg(gfb->dev, "empty!\n");
++
++		/* display the entire frame then switch to command */
++		glamofb_reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++			  GLAMO_LCD_CMD_TYPE_DISP |
++			  GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
++
++		/* wait until lcd idle */
++		dev_dbg(gfb->dev, "waiting for lcd idle: ");
++		timeout = 2000000;
++		while (!(glamofb_reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
++		      (timeout--))
++			cpu_relax();
++		if (timeout < 0) {
++			printk(KERN_ERR"*************"
++				       "glamofb lcd never idle"
++				       "*************\n");
++			return -EIO;
++		}
++
++		mdelay(100);
++
++		dev_dbg(gfb->dev, "cmd mode entered\n");
++
++	} else {
++		/* RGB interface needs vsync/hsync */
++		if (glamofb_reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
++			glamofb_reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++				  GLAMO_LCD_CMD_TYPE_DISP |
++				  GLAMO_LCD_CMD_DATA_DISP_SYNC);
++
++		glamofb_reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++			  GLAMO_LCD_CMD_TYPE_DISP |
++			  GLAMO_LCD_CMD_DATA_DISP_FIRE);
++	}
++
++	return 0;
++}
++
++static void glamofb_program_mode(struct glamofb_handle *gfb)
++{
++	unsigned int sync, bp, disp, fp, total;
++	unsigned long flags;
++	struct glamo_core *gcore = gfb->core;
++	struct fb_var_screeninfo *var = &gfb->fb->var;
++
++	dev_dbg(&gcore->pdev->dev,
++			  "glamofb_program_mode spin_lock_irqsave\n");
++	spin_lock_irqsave(&gfb->lock_cmd, flags);
++
++	if (glamofb_cmd_mode(gfb, 1))
++		goto out_unlock;
++
++	if (var->pixclock)
++		glamo_engine_reclock(gcore, GLAMO_ENGINE_LCD,
++				 (1000000000UL / gfb->fb->var.pixclock) * 1000);
++
++	glamofb_reg_set_bit_mask(gfb,
++			 GLAMO_REG_LCD_WIDTH,
++			 GLAMO_LCD_WIDTH_MASK,
++			 var->xres);
++	glamofb_reg_set_bit_mask(gfb,
++			 GLAMO_REG_LCD_HEIGHT,
++			 GLAMO_LCD_HEIGHT_MASK,
++			 var->yres);
++	glamofb_reg_set_bit_mask(gfb,
++			 GLAMO_REG_LCD_PITCH,
++			 GLAMO_LCD_PITCH_MASK,
++			 gfb->fb->fix.line_length);
++
++	/* honour the rotation request */
++	__rotate_lcd(gfb, var->rotate);
++
++	/* update scannout timings */
++	sync = 0;
++	bp = sync + var->hsync_len;
++	disp = bp + var->left_margin;
++	fp = disp + var->xres;
++	total = fp + var->right_margin;
++
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_TOTAL,
++			 GLAMO_LCD_HV_TOTAL_MASK, total);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_START,
++			 GLAMO_LCD_HV_RETR_START_MASK, sync);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_END,
++			 GLAMO_LCD_HV_RETR_END_MASK, bp);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_START,
++			  GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_END,
++			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
++
++	sync = 0;
++	bp = sync + var->vsync_len;
++	disp = bp + var->upper_margin;
++	fp = disp + var->yres;
++	total = fp + var->lower_margin;
++
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_TOTAL,
++			 GLAMO_LCD_HV_TOTAL_MASK, total);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_START,
++			  GLAMO_LCD_HV_RETR_START_MASK, sync);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_END,
++			 GLAMO_LCD_HV_RETR_END_MASK, bp);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_START,
++			 GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
++	glamofb_reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_END,
++			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
++
++	glamofb_cmd_mode(gfb, 0);
++
++	gfb->mode_set = 1;
++
++out_unlock:
++	dev_dbg(&gcore->pdev->dev,
++		  "glamofb_program_mode spin_unlock_irqrestore\n");
++	spin_unlock_irqrestore(&gfb->lock_cmd, flags);
++}
++
++static struct fb_videomode *glamofb_find_mode(struct fb_info *info,
++	struct fb_var_screeninfo *var)
++{
++	struct glamofb_handle *glamo = info->par;
++	struct glamo_fb_platform_data *pdata = glamo->mach_info;
++	struct fb_videomode *mode;
++	int i;
++
++	for (i = pdata->num_modes, mode = pdata->modes; i; --i, ++mode) {
++		if (mode->xres == var->xres &&
++			mode->yres == var->yres)
++			return mode;
++	}
++
++	return NULL;
++}
++
++static int glamofb_set_par(struct fb_info *info)
++{
++	struct glamofb_handle *glamo = info->par;
++	struct fb_var_screeninfo *var = &info->var;
++	struct fb_videomode *mode;
++
++	mode = glamofb_find_mode(info, var);
++	if (!mode)
++		return -EINVAL;
++
++	fb_videomode_to_var(var, mode);
++
++	info->mode = mode;
++
++	glamo->mode_set = 0;
++
++	switch (var->rotate) {
++	case FB_ROTATE_CW:
++	case FB_ROTATE_CCW:
++		info->fix.line_length = (var->yres * var->bits_per_pixel) / 8;
++		/* FIXME: Limit pixelclock */
++		var->pixclock *= 2;
++		break;
++	default:
++		info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
++		break;
++	}
++
++	if (glamo->output_enabled)
++		glamofb_program_mode(glamo);
++
++	return 0;
++}
++
++static int glamofb_blank(int blank_mode, struct fb_info *info)
++{
++	struct glamofb_handle *gfb = info->par;
++
++	dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
++
++	switch (blank_mode) {
++	case FB_BLANK_VSYNC_SUSPEND:
++	case FB_BLANK_HSYNC_SUSPEND:
++		/* FIXME: add pdata hook/flag to indicate whether
++		 * we should already switch off pixel clock here */
++		break;
++	case FB_BLANK_POWERDOWN:
++		/* disable the pixel clock */
++		glamo_output_disable(gfb);
++		gfb->blank_mode = blank_mode;
++		break;
++	case FB_BLANK_UNBLANK:
++	case FB_BLANK_NORMAL:
++		glamo_output_enable(gfb);
++		gfb->blank_mode = blank_mode;
++		break;
++	}
++
++	/* FIXME: once we have proper clock management in glamo-core,
++	 * we can determine if other units need MCLK1 or the PLL, and
++	 * disable it if not used. */
++	return 0;
++}
++
++static inline unsigned int chan_to_field(unsigned int chan,
++	struct fb_bitfield *bf)
++{
++	chan &= 0xffff;
++	chan >>= 16 - bf->length;
++	return chan << bf->offset;
++}
++
++static int glamofb_setcolreg(unsigned regno, unsigned red, unsigned green,
++	unsigned blue, unsigned transp, struct fb_info *info)
++{
++	struct glamofb_handle *glamo = info->par;
++	unsigned int val;
++
++	switch (glamo->fb->fix.visual) {
++	case FB_VISUAL_TRUECOLOR:
++	case FB_VISUAL_DIRECTCOLOR:
++		/* true-colour, use pseuo-palette */
++
++		if (regno < 16) {
++			u32 *pal = glamo->fb->pseudo_palette;
++
++			val  = chan_to_field(red, &glamo->fb->var.red);
++			val |= chan_to_field(green, &glamo->fb->var.green);
++			val |= chan_to_field(blue, &glamo->fb->var.blue);
++
++			pal[regno] = val;
++		};
++		break;
++	default:
++		return 1; /* unknown type */
++	}
++
++	return 0;
++}
++
++static int glamofb_ioctl(struct fb_info *info, unsigned int cmd,
++	unsigned long arg)
++{
++	struct glamofb_handle *gfb = (struct glamofb_handle *)info->par;
++	struct glamo_core *gcore = gfb->core;
++	int retval = -ENOTTY;
++
++	switch (cmd) {
++	case GLAMOFB_ENGINE_ENABLE:
++		retval = glamo_engine_enable(gcore, arg);
++		break;
++	case GLAMOFB_ENGINE_DISABLE:
++		retval = glamo_engine_disable(gcore, arg);
++		break;
++	case GLAMOFB_ENGINE_RESET:
++		glamo_engine_reset(gcore, arg);
++		retval = 0;
++		break;
++	default:
++		break;
++	}
++
++	return retval;
++}
++
++
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++static inline void glamofb_vsync_wait(struct glamofb_handle *glamo, int line,
++	int size, int range)
++{
++	int count[2];
++
++	do {
++		count[0] = glamofb_reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
++		count[1] = glamofb_reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
++	} while (count[0] != count[1] ||
++			(line < count[0] + range &&
++			 size > count[0] - range) ||
++			count[0] < range * 2);
++}
++
++/*
++ * Enable/disable the hardware cursor mode altogether
++ * (for blinking and such, use glamofb_cursor()).
++ */
++static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
++{
++	int y, size;
++
++	if (glamo->cursor_on) {
++		y = glamofb_reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
++		size = glamofb_reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
++
++		glamofb_vsync_wait(glamo, y, size, 30);
++	}
++
++	glamofb_reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
++			GLAMO_LCD_MODE1_CURSOR_EN,
++			on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
++	glamo->cursor_on = on;
++
++	/* Hide the cursor by default */
++	glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
++}
++
++static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
++{
++	struct glamofb_handle *glamo = info->par;
++	unsigned long flags;
++
++	spin_lock_irqsave(&glamo->lock_cmd, flags);
++
++	glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
++			cursor->enable ? cursor->image.width : 0);
++
++	if (cursor->set & FB_CUR_SETPOS) {
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
++			  cursor->image.dx);
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
++			  cursor->image.dy);
++	}
++
++	if (cursor->set & FB_CUR_SETCMAP) {
++		uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
++		uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
++
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
++	}
++
++	if (cursor->set & FB_CUR_SETHOT)
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
++				(cursor->hot.x << 8) | cursor->hot.y);
++
++	if ((cursor->set & FB_CUR_SETSIZE) ||
++	    (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
++		int x, y, pitch, op;
++		const uint8_t *pcol = cursor->image.data;
++		const uint8_t *pmsk = cursor->mask;
++		uint8_t __iomem *dst = glamo->cursor_addr;
++		uint8_t dcol = 0;
++		uint8_t dmsk = 0;
++		uint8_t byte = 0;
++
++		if (cursor->image.depth > 1) {
++			spin_unlock_irqrestore(&glamo->lock_cmd, flags);
++			return -EINVAL;
++		}
++
++		pitch = ((cursor->image.width + 7) >> 2) & ~1;
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
++			pitch);
++		glamofb_reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
++			cursor->image.height);
++
++		for (y = 0; y < cursor->image.height; y++) {
++			byte = 0;
++			for (x = 0; x < cursor->image.width; x++) {
++				if ((x % 8) == 0) {
++					dcol = *pcol++;
++					dmsk = *pmsk++;
++				} else {
++					dcol >>= 1;
++					dmsk >>= 1;
++				}
++
++				if (cursor->rop == ROP_COPY)
++					op = (dmsk & 1) ?
++						(dcol & 1) ? 1 : 3 : 0;
++				else
++					op = ((dmsk & 1) << 1) |
++						((dcol & 1) << 0);
++				byte |= op << ((x & 3) << 1);
++
++				if (x % 4 == 3) {
++					writeb(byte, dst + x / 4);
++					byte = 0;
++				}
++			}
++			if (x % 4) {
++				writeb(byte, dst + x / 4);
++				byte = 0;
++			}
++
++			dst += pitch;
++		}
++	}
++
++	spin_unlock_irqrestore(&glamo->lock_cmd, flags);
++
++	return 0;
++}
++#endif
++
++static struct fb_ops glamofb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_check_var	= glamofb_check_var,
++	.fb_set_par	= glamofb_set_par,
++	.fb_blank	= glamofb_blank,
++	.fb_setcolreg	= glamofb_setcolreg,
++	.fb_ioctl = glamofb_ioctl,
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++	.fb_cursor	= glamofb_cursor,
++#endif
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++	.fb_imageblit	= cfb_imageblit,
++};
++
++static int glamofb_init_regs(struct glamofb_handle *glamo)
++{
++	struct fb_info *info = glamo->fb;
++
++	glamofb_check_var(&info->var, info);
++	glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
++	glamofb_set_par(info);
++
++	return 0;
++}
++
++static int __devinit glamofb_probe(struct platform_device *pdev)
++{
++	int rc = -EIO;
++	struct fb_info *fbinfo;
++	struct glamofb_handle *glamofb;
++	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
++	struct glamo_fb_platform_data *mach_info;
++
++	printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
++		"Openmoko, Inc.\n");
++
++	if (!core->pdata || !core->pdata->fb_data)
++		return -ENOENT;
++
++
++	fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
++	if (!fbinfo)
++		return -ENOMEM;
++
++
++	glamofb = fbinfo->par;
++	glamofb->fb = fbinfo;
++	glamofb->dev = &pdev->dev;
++
++	glamofb->blank_mode = FB_BLANK_POWERDOWN;
++
++	strcpy(fbinfo->fix.id, "SMedia Glamo");
++
++	glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++						    "glamo-fb-regs");
++	if (!glamofb->reg) {
++		dev_err(&pdev->dev, "platform device with no registers?\n");
++		rc = -ENOENT;
++		goto out_free;
++	}
++
++	glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++							"glamo-fb-mem");
++	if (!glamofb->fb_res) {
++		dev_err(&pdev->dev, "platform device with no memory ?\n");
++		rc = -ENOENT;
++		goto out_free;
++	}
++
++	glamofb->reg = request_mem_region(glamofb->reg->start,
++					      resource_size(glamofb->reg),
++					      pdev->name);
++	if (!glamofb->reg) {
++		dev_err(&pdev->dev, "failed to request mmio region\n");
++		goto out_free;
++	}
++
++	glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
++						 resource_size(glamofb->fb_res),
++						 pdev->name);
++	if (!glamofb->fb_res) {
++		dev_err(&pdev->dev, "failed to request vram region\n");
++		goto out_release_reg;
++	}
++
++	/* we want to remap only the registers required for this core
++	 * driver. */
++	glamofb->base = ioremap_nocache(glamofb->reg->start,
++					resource_size(glamofb->reg));
++	if (!glamofb->base) {
++		dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
++		goto out_release_fb;
++	}
++
++	fbinfo->fix.smem_start = (unsigned long)glamofb->fb_res->start;
++	fbinfo->fix.smem_len = (__u32)resource_size(glamofb->fb_res);
++
++	fbinfo->screen_base = ioremap(glamofb->fb_res->start,
++					   resource_size(glamofb->fb_res));
++	if (!fbinfo->screen_base) {
++		dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
++		goto out_release_fb;
++	}
++	glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
++
++	platform_set_drvdata(pdev, glamofb);
++
++	mach_info = core->pdata->fb_data;
++	glamofb->core = core;
++	glamofb->mach_info = mach_info;
++
++	fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
++	fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
++	fbinfo->fix.type_aux = 0;
++	fbinfo->fix.xpanstep = 0;
++	fbinfo->fix.ypanstep = 0;
++	fbinfo->fix.ywrapstep = 0;
++	fbinfo->fix.accel = FB_ACCEL_GLAMO;
++
++
++	fbinfo->fbops = &glamofb_ops;
++	fbinfo->flags = FBINFO_FLAG_DEFAULT;
++	fbinfo->pseudo_palette = &glamofb->pseudo_pal;
++
++	fbinfo->mode = mach_info->modes;
++	fb_videomode_to_var(&fbinfo->var, fbinfo->mode);
++	fbinfo->var.bits_per_pixel = 16;
++	fbinfo->var.nonstd = 0;
++	fbinfo->var.activate = FB_ACTIVATE_NOW;
++	fbinfo->var.height = mach_info->height;
++	fbinfo->var.width = mach_info->width;
++	fbinfo->var.accel_flags = 0;
++	fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
++
++	glamo_engine_enable(core, GLAMO_ENGINE_LCD);
++	glamo_engine_reset(core, GLAMO_ENGINE_LCD);
++	glamofb->output_enabled = 1;
++	glamofb->mode_set = 1;
++
++	dev_info(&pdev->dev, "spin_lock_init\n");
++	spin_lock_init(&glamofb->lock_cmd);
++	glamofb_init_regs(glamofb);
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++	glamofb_cursor_onoff(glamofb, 1);
++#endif
++
++	fb_videomode_to_modelist(mach_info->modes, mach_info->num_modes,
++				 &fbinfo->modelist);
++
++	rc = register_framebuffer(fbinfo);
++	if (rc < 0) {
++		dev_err(&pdev->dev, "failed to register framebuffer\n");
++		goto out_unmap_fb;
++	}
++
++	printk(KERN_INFO "fb%d: %s frame buffer device\n",
++		fbinfo->node, fbinfo->fix.id);
++
++	return 0;
++
++out_unmap_fb:
++	iounmap(fbinfo->screen_base);
++	iounmap(glamofb->base);
++out_release_fb:
++	release_mem_region(glamofb->fb_res->start,
++				resource_size(glamofb->fb_res));
++out_release_reg:
++	release_mem_region(glamofb->reg->start,
++				resource_size(glamofb->reg));
++out_free:
++	framebuffer_release(fbinfo);
++	return rc;
++}
++
++static int __devexit glamofb_remove(struct platform_device *pdev)
++{
++	struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
++
++	iounmap(glamofb->fb->screen_base);
++	iounmap(glamofb->base);
++
++	release_mem_region(glamofb->fb_res->start,
++				resource_size(glamofb->fb_res));
++	release_mem_region(glamofb->reg->start, resource_size(glamofb->reg));
++
++	platform_set_drvdata(pdev, NULL);
++	framebuffer_release(glamofb->fb);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int glamofb_suspend(struct device *dev)
++{
++	struct glamofb_handle *gfb = dev_get_drvdata(dev);
++
++	console_lock();
++	fb_set_suspend(gfb->fb, 1);
++	console_unlock();
++
++	/* seriously -- nobody is allowed to touch glamo memory when we
++	 * are suspended or we lock on nWAIT
++	 */
++	/* iounmap(gfb->fb->screen_base); */
++
++	return 0;
++}
++
++static int glamofb_resume(struct device *dev)
++{
++	struct glamofb_handle *gfb = dev_get_drvdata(dev);
++
++	/* OK let's allow framebuffer ops again */
++	/* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
++					   resource_size(gfb->fb_res)); */
++	glamo_engine_enable(gfb->core, GLAMO_ENGINE_LCD);
++	glamo_engine_reset(gfb->core, GLAMO_ENGINE_LCD);
++
++	glamofb_init_regs(gfb);
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++	glamofb_cursor_onoff(gfb, 1);
++#endif
++
++	console_lock();
++	fb_set_suspend(gfb->fb, 0);
++	console_unlock();
++
++	return 0;
++}
++
++static const struct dev_pm_ops glamofb_pm_ops = {
++	.suspend = glamofb_suspend,
++	.resume = glamofb_resume,
++};
++
++#define GLAMOFB_PM_OPS (&glamofb_pm_ops)
++
++#else
++#define GLAMOFB_PM_OPS NULL
++#endif
++
++static struct platform_driver glamofb_driver = {
++	.probe		= glamofb_probe,
++	.remove		= __devexit_p(glamofb_remove),
++	.driver		= {
++		.name	= "glamo-fb",
++		.owner	= THIS_MODULE,
++		.pm	= GLAMOFB_PM_OPS
++	},
++};
++
++static int __init glamofb_init(void)
++{
++	return platform_driver_register(&glamofb_driver);
++}
++module_init(glamofb_init);
++
++static void __exit glamofb_cleanup(void)
++{
++	platform_driver_unregister(&glamofb_driver);
++}
++module_exit(glamofb_cleanup);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:glamo-fb");
+diff --git a/include/linux/fb.h b/include/linux/fb.h
+index 6a82748..6965285 100644
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -135,6 +135,7 @@
+ #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+ #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+ #define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
++#define FB_ACCEL_GLAMO		100	/* Smedia Glamo 3362            */
+ 
+ #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+ #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
+new file mode 100644
+index 0000000..896579b
+--- /dev/null
++++ b/include/linux/glamofb.h
+@@ -0,0 +1,21 @@
++#ifndef _LINUX_GLAMOFB_H
++#define _LINUX_GLAMOFB_H
++
++#ifdef __KERNEL__
++
++#include <linux/fb.h>
++
++struct glamo_fb_platform_data {
++    int width, height;
++
++    int num_modes;
++    struct fb_videomode *modes;
++};
++
++#endif
++
++#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
++#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
++#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
++
++#endif
+diff --git a/include/linux/jbt6k74.h b/include/linux/jbt6k74.h
+new file mode 100644
+index 0000000..3f0735d
+--- /dev/null
++++ b/include/linux/jbt6k74.h
+@@ -0,0 +1,18 @@
++#ifndef __JBT6K74_H__
++#define __JBT6K74_H__
++
++#include <linux/spi/spi.h>
++
++/*
++ *  struct jbt6k74_platform_data - Platform data for jbt6k74 driver
++ *  @enable_pixel_clock: Callback to enable or disable the pixelclock of the
++ *  gpu.
++ *  @gpio_reset: Reset gpio pin number.
++ */
++struct jbt6k74_platform_data {
++	void (*enable_pixel_clock)(struct device *dev, int enable);
++
++	int gpio_reset;
++};
++
++#endif
+diff --git a/include/linux/leds_pwm.h b/include/linux/leds_pwm.h
+index 33a0711..42d4969 100644
+--- a/include/linux/leds_pwm.h
++++ b/include/linux/leds_pwm.h
+@@ -16,6 +16,26 @@ struct led_pwm {
+ struct led_pwm_platform_data {
+ 	int			num_leds;
+ 	struct led_pwm	*leds;
++
++	/* @init: The init callback is called after the pwm device for a led has
++	 * been successfully configured. If the return value is negative it will be
++	 * seen as an error and initzalisation of the leds-pwm device will fail.
++	 */
++	int (*init)(struct device *dev, struct led_pwm *led);
++
++	/* @notify: The notify callback is called whenever the brightness of a led
++	 * is changed.
++	 * The return value of the callback will be the brightness which is used to
++	 * configure the pwm device.
++	 */
++	enum led_brightness (*notify)(struct device *dev, struct led_pwm *led,
++	    enum led_brightness brightness);
++
++	/* @exit: The exit callback is called, whenever a led device registered by
++	 * the leds-pwm device is unregistered. It will be called prior to freeing
++	 * the pwm device.
++	 */
++	void (*exit)(struct device *dev, struct led_pwm *led);
+ };
+ 
+ #endif
+diff --git a/include/linux/mfd/glamo-core.h b/include/linux/mfd/glamo-core.h
+new file mode 100644
+index 0000000..8275a2f
+--- /dev/null
++++ b/include/linux/mfd/glamo-core.h
+@@ -0,0 +1,58 @@
++#ifndef __GLAMO_CORE_H
++#define __GLAMO_CORE_H
++
++#include <linux/mfd/glamo.h>
++
++/* for the time being, we put the on-screen framebuffer into the lowest
++ * VRAM space.  This should make the code easily compatible with the various
++ * 2MB/4MB/8MB variants of the Smedia chips */
++#define GLAMO_OFFSET_VRAM	0x800000
++#define GLAMO_OFFSET_FB	(GLAMO_OFFSET_VRAM)
++
++/* we only allocate the minimum possible size for the framebuffer to make
++ * sure we have sufficient memory for other functions of the chip */
++/*#define GLAMO_FB_SIZE	(640*480*4)	*//* == 0x12c000 */
++#define GLAMO_INTERNAL_RAM_SIZE 0x800000
++#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
++#define GLAMO_FB_SIZE	(GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
++
++enum glamo_pll {
++	GLAMO_PLL1,
++	GLAMO_PLL2,
++};
++
++enum glamo_engine_state {
++	GLAMO_ENGINE_DISABLED,
++	GLAMO_ENGINE_SUSPENDED,
++	GLAMO_ENGINE_ENABLED,
++};
++
++struct glamo_core {
++	int irq;
++	int irq_base;
++	struct resource *mem;
++	void __iomem *base;
++	struct platform_device *pdev;
++	struct glamo_platform_data *pdata;
++	enum glamo_engine_state engine_state[__NUM_GLAMO_ENGINES];
++	spinlock_t lock;
++	uint16_t saved_irq_mask;
++#ifdef CONFIG_DEBUG_FS
++	struct dentry *debugfs_dir;
++#endif
++};
++
++struct glamo_script {
++	uint16_t reg;
++	uint16_t val;
++};
++
++int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll);
++
++int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
++int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine);
++int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
++void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
++int glamo_engine_reclock(struct glamo_core *glamo,
++			 enum glamo_engine engine, int ps);
++#endif /* __GLAMO_CORE_H */
+diff --git a/include/linux/mfd/glamo-regs.h b/include/linux/mfd/glamo-regs.h
+new file mode 100644
+index 0000000..59848e1
+--- /dev/null
++++ b/include/linux/mfd/glamo-regs.h
+@@ -0,0 +1,630 @@
++#ifndef _GLAMO_REGS_H
++#define _GLAMO_REGS_H
++
++/* Smedia Glamo 336x/337x driver
++ *
++ * (C) 2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++enum glamo_regster_offsets {
++	GLAMO_REGOFS_GENERIC	= 0x0000,
++	GLAMO_REGOFS_HOSTBUS	= 0x0200,
++	GLAMO_REGOFS_MEMORY	= 0x0300,
++	GLAMO_REGOFS_VIDCAP	= 0x0400,
++	GLAMO_REGOFS_ISP	= 0x0500,
++	GLAMO_REGOFS_JPEG	= 0x0800,
++	GLAMO_REGOFS_MPEG	= 0x0c00,
++	GLAMO_REGOFS_LCD	= 0x1100,
++	GLAMO_REGOFS_MMC	= 0x1400,
++	GLAMO_REGOFS_MPROC0	= 0x1500,
++	GLAMO_REGOFS_MPROC1	= 0x1580,
++	GLAMO_REGOFS_CMDQUEUE	= 0x1600,
++	GLAMO_REGOFS_RISC	= 0x1680,
++	GLAMO_REGOFS_2D		= 0x1700,
++	GLAMO_REGOFS_3D		= 0x1b00,
++	GLAMO_REGOFS_END	= 0x2400,
++};
++
++
++enum glamo_register_generic {
++	GLAMO_REG_GCONF1	= 0x0000,
++	GLAMO_REG_GCONF2	= 0x0002,
++#define	GLAMO_REG_DEVICE_ID	GLAMO_REG_GCONF2
++	GLAMO_REG_GCONF3	= 0x0004,
++#define	GLAMO_REG_REVISION_ID	GLAMO_REG_GCONF3
++	GLAMO_REG_IRQ_GEN1	= 0x0006,
++#define GLAMO_REG_IRQ_ENABLE	GLAMO_REG_IRQ_GEN1
++	GLAMO_REG_IRQ_GEN2	= 0x0008,
++#define GLAMO_REG_IRQ_SET	GLAMO_REG_IRQ_GEN2
++	GLAMO_REG_IRQ_GEN3	= 0x000a,
++#define GLAMO_REG_IRQ_CLEAR	GLAMO_REG_IRQ_GEN3
++	GLAMO_REG_IRQ_GEN4	= 0x000c,
++#define GLAMO_REG_IRQ_STATUS	GLAMO_REG_IRQ_GEN4
++	GLAMO_REG_CLOCK_HOST	= 0x0010,
++	GLAMO_REG_CLOCK_MEMORY	= 0x0012,
++	GLAMO_REG_CLOCK_LCD	= 0x0014,
++	GLAMO_REG_CLOCK_MMC	= 0x0016,
++	GLAMO_REG_CLOCK_ISP	= 0x0018,
++	GLAMO_REG_CLOCK_JPEG	= 0x001a,
++	GLAMO_REG_CLOCK_3D	= 0x001c,
++	GLAMO_REG_CLOCK_2D	= 0x001e,
++	GLAMO_REG_CLOCK_RISC1	= 0x0020,	/* 3365 only? */
++	GLAMO_REG_CLOCK_RISC2	= 0x0022,	/* 3365 only? */
++	GLAMO_REG_CLOCK_MPEG	= 0x0024,
++	GLAMO_REG_CLOCK_MPROC	= 0x0026,
++
++	GLAMO_REG_CLOCK_GEN5_1	= 0x0030,
++	GLAMO_REG_CLOCK_GEN5_2	= 0x0032,
++	GLAMO_REG_CLOCK_GEN6	= 0x0034,
++	GLAMO_REG_CLOCK_GEN7	= 0x0036,
++	GLAMO_REG_CLOCK_GEN8	= 0x0038,
++	GLAMO_REG_CLOCK_GEN9	= 0x003a,
++	GLAMO_REG_CLOCK_GEN10	= 0x003c,
++	GLAMO_REG_CLOCK_GEN11	= 0x003e,
++	GLAMO_REG_PLL_GEN1	= 0x0040,
++	GLAMO_REG_PLL_GEN2	= 0x0042,
++	GLAMO_REG_PLL_GEN3	= 0x0044,
++	GLAMO_REG_PLL_GEN4	= 0x0046,
++	GLAMO_REG_PLL_GEN5	= 0x0048,
++	GLAMO_REG_GPIO_GEN1	= 0x0050,
++	GLAMO_REG_GPIO_GEN2	= 0x0052,
++	GLAMO_REG_GPIO_GEN3	= 0x0054,
++	GLAMO_REG_GPIO_GEN4	= 0x0056,
++	GLAMO_REG_GPIO_GEN5	= 0x0058,
++	GLAMO_REG_GPIO_GEN6	= 0x005a,
++	GLAMO_REG_GPIO_GEN7	= 0x005c,
++	GLAMO_REG_GPIO_GEN8	= 0x005e,
++	GLAMO_REG_GPIO_GEN9	= 0x0060,
++	GLAMO_REG_GPIO_GEN10	= 0x0062,
++	GLAMO_REG_DFT_GEN1	= 0x0070,
++	GLAMO_REG_DFT_GEN2	= 0x0072,
++	GLAMO_REG_DFT_GEN3	= 0x0074,
++	GLAMO_REG_DFT_GEN4	= 0x0076,
++
++	GLAMO_REG_DFT_GEN5	= 0x01e0,
++	GLAMO_REG_DFT_GEN6	= 0x01f0,
++};
++
++#define GLAMO_REG_HOSTBUS(x)	(GLAMO_REGOFS_HOSTBUS-2+(x*2))
++
++#define REG_MEM(x)		(GLAMO_REGOFS_MEMORY+(x))
++#define GLAMO_REG_MEM_TIMING(x)	(GLAMO_REG_MEM_TIMING1-2+(x*2))
++
++enum glamo_register_mem {
++	GLAMO_REG_MEM_TYPE	= REG_MEM(0x00),
++	GLAMO_REG_MEM_GEN	= REG_MEM(0x02),
++	GLAMO_REG_MEM_TIMING1	= REG_MEM(0x04),
++	GLAMO_REG_MEM_TIMING2	= REG_MEM(0x06),
++	GLAMO_REG_MEM_TIMING3	= REG_MEM(0x08),
++	GLAMO_REG_MEM_TIMING4	= REG_MEM(0x0a),
++	GLAMO_REG_MEM_TIMING5	= REG_MEM(0x0c),
++	GLAMO_REG_MEM_TIMING6	= REG_MEM(0x0e),
++	GLAMO_REG_MEM_TIMING7	= REG_MEM(0x10),
++	GLAMO_REG_MEM_TIMING8	= REG_MEM(0x12),
++	GLAMO_REG_MEM_TIMING9	= REG_MEM(0x14),
++	GLAMO_REG_MEM_TIMING10	= REG_MEM(0x16),
++	GLAMO_REG_MEM_TIMING11	= REG_MEM(0x18),
++	GLAMO_REG_MEM_POWER1	= REG_MEM(0x1a),
++	GLAMO_REG_MEM_POWER2	= REG_MEM(0x1c),
++	GLAMO_REG_MEM_LCD_BUF1	= REG_MEM(0x1e),
++	GLAMO_REG_MEM_LCD_BUF2	= REG_MEM(0x20),
++	GLAMO_REG_MEM_LCD_BUF3	= REG_MEM(0x22),
++	GLAMO_REG_MEM_LCD_BUF4	= REG_MEM(0x24),
++	GLAMO_REG_MEM_BIST1	= REG_MEM(0x26),
++	GLAMO_REG_MEM_BIST2	= REG_MEM(0x28),
++	GLAMO_REG_MEM_BIST3	= REG_MEM(0x2a),
++	GLAMO_REG_MEM_BIST4	= REG_MEM(0x2c),
++	GLAMO_REG_MEM_BIST5	= REG_MEM(0x2e),
++	GLAMO_REG_MEM_MAH1	= REG_MEM(0x30),
++	GLAMO_REG_MEM_MAH2	= REG_MEM(0x32),
++	GLAMO_REG_MEM_DRAM1	= REG_MEM(0x34),
++	GLAMO_REG_MEM_DRAM2	= REG_MEM(0x36),
++	GLAMO_REG_MEM_CRC	= REG_MEM(0x38),
++};
++
++#define GLAMO_MEM_TYPE_MASK	0x03
++
++enum glamo_reg_mem_dram1 {
++	/* b0 - b10 == refresh period, 1 -> 2048 clocks */
++	GLAMO_MEM_DRAM1_EN_GATE_CLK	= (1 << 11),
++	GLAMO_MEM_DRAM1_SELF_REFRESH	= (1 << 12),
++	GLAMO_MEM_DRAM1_EN_GATE_CKE	= (1 << 13),
++	GLAMO_MEM_DRAM1_EN_DRAM_REFRESH	= (1 << 14),
++	GLAMO_MEM_DRAM1_EN_MODEREG_SET	= (1 << 15),
++};
++
++enum glamo_reg_mem_dram2 {
++	GLAMO_MEM_DRAM2_DEEP_PWRDOWN	= (1 << 12),
++};
++
++enum glamo_irq_index {
++	GLAMO_IRQIDX_HOSTBUS	= 0,
++	GLAMO_IRQIDX_JPEG	= 1,
++	GLAMO_IRQIDX_MPEG	= 2,
++	GLAMO_IRQIDX_MPROC1	= 3,
++	GLAMO_IRQIDX_MPROC0	= 4,
++	GLAMO_IRQIDX_CMDQUEUE	= 5,
++	GLAMO_IRQIDX_2D		= 6,
++	GLAMO_IRQIDX_MMC	= 7,
++	GLAMO_IRQIDX_RISC	= 8,
++};
++
++enum glamo_irq {
++	GLAMO_IRQ_HOSTBUS	= (1 << GLAMO_IRQIDX_HOSTBUS),
++	GLAMO_IRQ_JPEG		= (1 << GLAMO_IRQIDX_JPEG),
++	GLAMO_IRQ_MPEG		= (1 << GLAMO_IRQIDX_MPEG),
++	GLAMO_IRQ_MPROC1	= (1 << GLAMO_IRQIDX_MPROC1),
++	GLAMO_IRQ_MPROC0	= (1 << GLAMO_IRQIDX_MPROC0),
++	GLAMO_IRQ_CMDQUEUE	= (1 << GLAMO_IRQIDX_CMDQUEUE),
++	GLAMO_IRQ_2D		= (1 << GLAMO_IRQIDX_2D),
++	GLAMO_IRQ_MMC		= (1 << GLAMO_IRQIDX_MMC),
++	GLAMO_IRQ_RISC		= (1 << GLAMO_IRQIDX_RISC),
++};
++
++enum glamo_reg_clock_host {
++	GLAMO_CLOCK_HOST_DG_BCLK	= 0x0001,
++	GLAMO_CLOCK_HOST_DG_M0CLK	= 0x0004,
++	GLAMO_CLOCK_HOST_RESET		= 0x1000,
++};
++
++enum glamo_reg_clock_mem {
++	GLAMO_CLOCK_MEM_DG_M1CLK	= 0x0001,
++	GLAMO_CLOCK_MEM_EN_M1CLK	= 0x0002,
++	GLAMO_CLOCK_MEM_DG_MOCACLK	= 0x0004,
++	GLAMO_CLOCK_MEM_EN_MOCACLK	= 0x0008,
++	GLAMO_CLOCK_MEM_RESET		= 0x1000,
++	GLAMO_CLOCK_MOCA_RESET		= 0x2000,
++};
++
++enum glamo_reg_clock_lcd {
++	GLAMO_CLOCK_LCD_DG_DCLK		= 0x0001,
++	GLAMO_CLOCK_LCD_EN_DCLK		= 0x0002,
++	GLAMO_CLOCK_LCD_DG_DMCLK	= 0x0004,
++	GLAMO_CLOCK_LCD_EN_DMCLK	= 0x0008,
++	GLAMO_CLOCK_LCD_EN_DHCLK	= 0x0020,
++	GLAMO_CLOCK_LCD_DG_M5CLK	= 0x0040,
++	GLAMO_CLOCK_LCD_EN_M5CLK	= 0x0080,
++	GLAMO_CLOCK_LCD_RESET		= 0x1000,
++};
++
++enum glamo_reg_clock_mmc {
++	GLAMO_CLOCK_MMC_DG_TCLK		= 0x0001,
++	GLAMO_CLOCK_MMC_EN_TCLK		= 0x0002,
++	GLAMO_CLOCK_MMC_DG_M9CLK	= 0x0004,
++	GLAMO_CLOCK_MMC_EN_M9CLK	= 0x0008,
++	GLAMO_CLOCK_MMC_RESET		= 0x1000,
++};
++
++enum glamo_reg_basic_mmc {
++	/* set to disable CRC error rejection */
++	GLAMO_BASIC_MMC_DISABLE_CRC	= 0x0001,
++	/* enable completion interrupt */
++	GLAMO_BASIC_MMC_EN_COMPL_INT	= 0x0002,
++	/* stop MMC clock while enforced idle waiting for data from card */
++	GLAMO_BASIC_MMC_NO_CLK_RD_WAIT	= 0x0004,
++	/* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
++	GLAMO_BASIC_MMC_EN_4BIT_DATA	= 0x0008,
++	/* enable 75K pullups on D3..D0 */
++	GLAMO_BASIC_MMC_EN_DATA_PUPS	= 0x0010,
++	/* enable 75K pullup on CMD */
++	GLAMO_BASIC_MMC_EN_CMD_PUP	= 0x0020,
++	/* IO drive strength 00=weak -> 11=strongest */
++	GLAMO_BASIC_MMC_EN_DR_STR0	= 0x0040,
++	GLAMO_BASIC_MMC_EN_DR_STR1	= 0x0080,
++	/* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
++	GLAMO_BASIC_MMC_EN_TCLK_DLYA0	= 0x0100,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYA1	= 0x0200,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYA2	= 0x0400,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYA3	= 0x0800,
++	/* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
++	GLAMO_BASIC_MMC_EN_TCLK_DLYB0	= 0x1000,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYB1	= 0x2000,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYB2	= 0x4000,
++	GLAMO_BASIC_MMC_EN_TCLK_DLYB3	= 0x8000,
++};
++
++enum glamo_reg_stat1_mmc {
++	/* command "counter" (really: toggle) */
++	GLAMO_STAT1_MMC_CMD_CTR	= 0x8000,
++	/* engine is idle */
++	GLAMO_STAT1_MMC_IDLE	= 0x4000,
++	/* readback response is ready */
++	GLAMO_STAT1_MMC_RB_RRDY	= 0x0200,
++	/* readback data is ready */
++	GLAMO_STAT1_MMC_RB_DRDY	= 0x0100,
++	/* no response timeout */
++	GLAMO_STAT1_MMC_RTOUT	= 0x0020,
++	/* no data timeout */
++	GLAMO_STAT1_MMC_DTOUT	= 0x0010,
++	/* CRC error on block write */
++	GLAMO_STAT1_MMC_BWERR	= 0x0004,
++	/* CRC error on block read */
++	GLAMO_STAT1_MMC_BRERR	= 0x0002
++};
++
++enum glamo_reg_fire_mmc {
++	/* command "counter" (really: toggle)
++	 * the STAT1 register reflects this so you can ensure you don't look
++	 * at status for previous command
++	 */
++	GLAMO_FIRE_MMC_CMD_CTR	= 0x8000,
++	/* sets kind of response expected */
++	GLAMO_FIRE_MMC_RES_MASK	= 0x0700,
++	/* sets command type */
++	GLAMO_FIRE_MMC_TYP_MASK	= 0x00C0,
++	/* sets command class */
++	GLAMO_FIRE_MMC_CLS_MASK	= 0x000F,
++};
++
++enum glamo_fire_mmc_response_types {
++	GLAMO_FIRE_MMC_RSPT_R1	= 0x0000,
++	GLAMO_FIRE_MMC_RSPT_R1b	= 0x0100,
++	GLAMO_FIRE_MMC_RSPT_R2	= 0x0200,
++	GLAMO_FIRE_MMC_RSPT_R3	= 0x0300,
++	GLAMO_FIRE_MMC_RSPT_R4	= 0x0400,
++	GLAMO_FIRE_MMC_RSPT_R5	= 0x0500,
++};
++
++enum glamo_fire_mmc_command_types {
++	/* broadcast, no response */
++	GLAMO_FIRE_MMC_CMDT_BNR	= 0x0000,
++	/* broadcast, with response */
++	GLAMO_FIRE_MMC_CMDT_BR	= 0x0040,
++	/* addressed, no data */
++	GLAMO_FIRE_MMC_CMDT_AND	= 0x0080,
++	/* addressed, with data */
++	GLAMO_FIRE_MMC_CMDT_AD	= 0x00C0,
++};
++
++enum glamo_fire_mmc_command_class {
++	/* "Stream Read" */
++	GLAMO_FIRE_MMC_CC_STRR	= 0x0000,
++	/* Single Block Read */
++	GLAMO_FIRE_MMC_CC_SBR	= 0x0001,
++	/* Multiple Block Read With Stop */
++	GLAMO_FIRE_MMC_CC_MBRS	= 0x0002,
++	/* Multiple Block Read No Stop */
++	GLAMO_FIRE_MMC_CC_MBRNS	= 0x0003,
++	/* RESERVED for "Stream Write" */
++	GLAMO_FIRE_MMC_CC_STRW	= 0x0004,
++	/* "Stream Write" */
++	GLAMO_FIRE_MMC_CC_SBW	= 0x0005,
++	/* RESERVED for Multiple Block Write With Stop */
++	GLAMO_FIRE_MMC_CC_MBWS	= 0x0006,
++	/* Multiple Block Write No Stop */
++	GLAMO_FIRE_MMC_CC_MBWNS	= 0x0007,
++	/* STOP command */
++	GLAMO_FIRE_MMC_CC_STOP	= 0x0008,
++	/* Cancel on Running Command */
++	GLAMO_FIRE_MMC_CC_CANCL	= 0x0009,
++	/* "Basic Command" */
++	GLAMO_FIRE_MMC_CC_BASIC	= 0x000a,
++};
++
++/* these are offsets from the start of the MMC register region */
++enum glamo_register_mmc {
++	/* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
++	GLAMO_REG_MMC_CMD_REG1	= 0x00,
++	/* MMC command, b15..0 = cmd arg b23 .. 8 */
++	GLAMO_REG_MMC_CMD_REG2	= 0x02,
++	/* MMC command, b15=start, b14=transmission,
++	 * b13..8=cmd idx, b7..0=cmd arg b31..24
++	 */
++	GLAMO_REG_MMC_CMD_REG3	= 0x04,
++	GLAMO_REG_MMC_CMD_FIRE	= 0x06,
++	GLAMO_REG_MMC_CMD_RSP1	= 0x10,
++	GLAMO_REG_MMC_CMD_RSP2	= 0x12,
++	GLAMO_REG_MMC_CMD_RSP3	= 0x14,
++	GLAMO_REG_MMC_CMD_RSP4	= 0x16,
++	GLAMO_REG_MMC_CMD_RSP5	= 0x18,
++	GLAMO_REG_MMC_CMD_RSP6	= 0x1a,
++	GLAMO_REG_MMC_CMD_RSP7	= 0x1c,
++	GLAMO_REG_MMC_CMD_RSP8	= 0x1e,
++	GLAMO_REG_MMC_RB_STAT1	= 0x20,
++	GLAMO_REG_MMC_RB_BLKCNT	= 0x22,
++	GLAMO_REG_MMC_RB_BLKLEN	= 0x24,
++	GLAMO_REG_MMC_BASIC	= 0x30,
++	GLAMO_REG_MMC_RDATADS1	= 0x34,
++	GLAMO_REG_MMC_RDATADS2	= 0x36,
++	GLAMO_REG_MMC_WDATADS1	= 0x38,
++	GLAMO_REG_MMC_WDATADS2	= 0x3a,
++	GLAMO_REG_MMC_DATBLKCNT	= 0x3c,
++	GLAMO_REG_MMC_DATBLKLEN	= 0x3e,
++	GLAMO_REG_MMC_TIMEOUT	= 0x40,
++
++};
++
++enum glamo_reg_clock_isp {
++	GLAMO_CLOCK_ISP_DG_I1CLK	= 0x0001,
++	GLAMO_CLOCK_ISP_EN_I1CLK	= 0x0002,
++	GLAMO_CLOCK_ISP_DG_CCLK		= 0x0004,
++	GLAMO_CLOCK_ISP_EN_CCLK		= 0x0008,
++	GLAMO_CLOCK_ISP_EN_SCLK		= 0x0020,
++	GLAMO_CLOCK_ISP_DG_M2CLK	= 0x0040,
++	GLAMO_CLOCK_ISP_EN_M2CLK	= 0x0080,
++	GLAMO_CLOCK_ISP_DG_M15CLK	= 0x0100,
++	GLAMO_CLOCK_ISP_EN_M15CLK	= 0x0200,
++	GLAMO_CLOCK_ISP1_RESET		= 0x1000,
++	GLAMO_CLOCK_ISP2_RESET		= 0x2000,
++};
++
++enum glamo_reg_clock_jpeg {
++	GLAMO_CLOCK_JPEG_DG_JCLK	= 0x0001,
++	GLAMO_CLOCK_JPEG_EN_JCLK	= 0x0002,
++	GLAMO_CLOCK_JPEG_DG_M3CLK	= 0x0004,
++	GLAMO_CLOCK_JPEG_EN_M3CLK	= 0x0008,
++	GLAMO_CLOCK_JPEG_RESET		= 0x1000,
++};
++
++enum glamo_reg_clock_2d {
++	GLAMO_CLOCK_2D_DG_GCLK		= 0x0001,
++	GLAMO_CLOCK_2D_EN_GCLK		= 0x0002,
++	GLAMO_CLOCK_2D_DG_M7CLK		= 0x0004,
++	GLAMO_CLOCK_2D_EN_M7CLK		= 0x0008,
++	GLAMO_CLOCK_2D_DG_M6CLK		= 0x0010,
++	GLAMO_CLOCK_2D_EN_M6CLK		= 0x0020,
++	GLAMO_CLOCK_2D_RESET		= 0x1000,
++	GLAMO_CLOCK_2D_CQ_RESET		= 0x2000,
++};
++
++enum glamo_reg_clock_3d {
++	GLAMO_CLOCK_3D_DG_ECLK		= 0x0001,
++	GLAMO_CLOCK_3D_EN_ECLK		= 0x0002,
++	GLAMO_CLOCK_3D_DG_RCLK		= 0x0004,
++	GLAMO_CLOCK_3D_EN_RCLK		= 0x0008,
++	GLAMO_CLOCK_3D_DG_M8CLK		= 0x0010,
++	GLAMO_CLOCK_3D_EN_M8CLK		= 0x0020,
++	GLAMO_CLOCK_3D_BACK_RESET	= 0x1000,
++	GLAMO_CLOCK_3D_FRONT_RESET	= 0x2000,
++};
++
++enum glamo_reg_clock_mpeg {
++	GLAMO_CLOCK_MPEG_DG_X0CLK	= 0x0001,
++	GLAMO_CLOCK_MPEG_EN_X0CLK	= 0x0002,
++	GLAMO_CLOCK_MPEG_DG_X1CLK	= 0x0004,
++	GLAMO_CLOCK_MPEG_EN_X1CLK	= 0x0008,
++	GLAMO_CLOCK_MPEG_DG_X2CLK	= 0x0010,
++	GLAMO_CLOCK_MPEG_EN_X2CLK	= 0x0020,
++	GLAMO_CLOCK_MPEG_DG_X3CLK	= 0x0040,
++	GLAMO_CLOCK_MPEG_EN_X3CLK	= 0x0080,
++	GLAMO_CLOCK_MPEG_DG_X4CLK	= 0x0100,
++	GLAMO_CLOCK_MPEG_EN_X4CLK	= 0x0200,
++	GLAMO_CLOCK_MPEG_DG_X6CLK	= 0x0400,
++	GLAMO_CLOCK_MPEG_EN_X6CLK	= 0x0800,
++	GLAMO_CLOCK_MPEG_ENC_RESET	= 0x1000,
++	GLAMO_CLOCK_MPEG_DEC_RESET	= 0x2000,
++};
++
++enum glamo_reg_clock51 {
++	GLAMO_CLOCK_GEN51_EN_DIV_MCLK	= 0x0001,
++	GLAMO_CLOCK_GEN51_EN_DIV_SCLK	= 0x0002,
++	GLAMO_CLOCK_GEN51_EN_DIV_JCLK	= 0x0004,
++	GLAMO_CLOCK_GEN51_EN_DIV_DCLK	= 0x0008,
++	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK	= 0x0010,
++	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK	= 0x0020,
++	GLAMO_CLOCK_GEN51_EN_DIV_GCLK	= 0x0040,
++	GLAMO_CLOCK_GEN51_EN_DIV_TCLK	= 0x0080,
++	/* FIXME: higher bits */
++};
++
++enum glamo_reg_hostbus2 {
++	GLAMO_HOSTBUS2_MMIO_EN_ISP	= 0x0001,
++	GLAMO_HOSTBUS2_MMIO_EN_JPEG	= 0x0002,
++	GLAMO_HOSTBUS2_MMIO_EN_MPEG	= 0x0004,
++	GLAMO_HOSTBUS2_MMIO_EN_LCD	= 0x0008,
++	GLAMO_HOSTBUS2_MMIO_EN_MMC	= 0x0010,
++	GLAMO_HOSTBUS2_MMIO_EN_MICROP0	= 0x0020,
++	GLAMO_HOSTBUS2_MMIO_EN_MICROP1	= 0x0040,
++	GLAMO_HOSTBUS2_MMIO_EN_CQ	= 0x0080,
++	GLAMO_HOSTBUS2_MMIO_EN_RISC	= 0x0100,
++	GLAMO_HOSTBUS2_MMIO_EN_2D	= 0x0200,
++	GLAMO_HOSTBUS2_MMIO_EN_3D	= 0x0400,
++};
++
++/* LCD Controller */
++
++#define REG_LCD(x)	(x)
++enum glamo_reg_lcd {
++	GLAMO_REG_LCD_MODE1		= REG_LCD(0x00),
++	GLAMO_REG_LCD_MODE2		= REG_LCD(0x02),
++	GLAMO_REG_LCD_MODE3		= REG_LCD(0x04),
++	GLAMO_REG_LCD_WIDTH		= REG_LCD(0x06),
++	GLAMO_REG_LCD_HEIGHT		= REG_LCD(0x08),
++	GLAMO_REG_LCD_POLARITY		= REG_LCD(0x0a),
++	GLAMO_REG_LCD_A_BASE1		= REG_LCD(0x0c),
++	GLAMO_REG_LCD_A_BASE2		= REG_LCD(0x0e),
++	GLAMO_REG_LCD_B_BASE1		= REG_LCD(0x10),
++	GLAMO_REG_LCD_B_BASE2		= REG_LCD(0x12),
++	GLAMO_REG_LCD_C_BASE1		= REG_LCD(0x14),
++	GLAMO_REG_LCD_C_BASE2		= REG_LCD(0x16),
++	GLAMO_REG_LCD_PITCH		= REG_LCD(0x18),
++	/* RES */
++	GLAMO_REG_LCD_HORIZ_TOTAL	= REG_LCD(0x1c),
++	/* RES */
++	GLAMO_REG_LCD_HORIZ_RETR_START	= REG_LCD(0x20),
++	/* RES */
++	GLAMO_REG_LCD_HORIZ_RETR_END	= REG_LCD(0x24),
++	/* RES */
++	GLAMO_REG_LCD_HORIZ_DISP_START	= REG_LCD(0x28),
++	/* RES */
++	GLAMO_REG_LCD_HORIZ_DISP_END	= REG_LCD(0x2c),
++	/* RES */
++	GLAMO_REG_LCD_VERT_TOTAL	= REG_LCD(0x30),
++	/* RES */
++	GLAMO_REG_LCD_VERT_RETR_START	= REG_LCD(0x34),
++	/* RES */
++	GLAMO_REG_LCD_VERT_RETR_END	= REG_LCD(0x38),
++	/* RES */
++	GLAMO_REG_LCD_VERT_DISP_START	= REG_LCD(0x3c),
++	/* RES */
++	GLAMO_REG_LCD_VERT_DISP_END	= REG_LCD(0x40),
++	/* RES */
++	GLAMO_REG_LCD_POL		= REG_LCD(0x44),
++	GLAMO_REG_LCD_DATA_START	= REG_LCD(0x46),
++	GLAMO_REG_LCD_FRATE_CONTRO	= REG_LCD(0x48),
++	GLAMO_REG_LCD_DATA_CMD_HDR	= REG_LCD(0x4a),
++	GLAMO_REG_LCD_SP_START		= REG_LCD(0x4c),
++	GLAMO_REG_LCD_SP_END		= REG_LCD(0x4e),
++	GLAMO_REG_LCD_CURSOR_BASE1	= REG_LCD(0x50),
++	GLAMO_REG_LCD_CURSOR_BASE2	= REG_LCD(0x52),
++	GLAMO_REG_LCD_CURSOR_PITCH	= REG_LCD(0x54),
++	GLAMO_REG_LCD_CURSOR_X_SIZE	= REG_LCD(0x56),
++	GLAMO_REG_LCD_CURSOR_Y_SIZE	= REG_LCD(0x58),
++	GLAMO_REG_LCD_CURSOR_X_POS	= REG_LCD(0x5a),
++	GLAMO_REG_LCD_CURSOR_Y_POS	= REG_LCD(0x5c),
++	GLAMO_REG_LCD_CURSOR_PRESET	= REG_LCD(0x5e),
++	GLAMO_REG_LCD_CURSOR_FG_COLOR	= REG_LCD(0x60),
++	/* RES */
++	GLAMO_REG_LCD_CURSOR_BG_COLOR	= REG_LCD(0x64),
++	/* RES */
++	GLAMO_REG_LCD_CURSOR_DST_COLOR	= REG_LCD(0x68),
++	/* RES */
++	GLAMO_REG_LCD_STATUS1		= REG_LCD(0x80),
++	GLAMO_REG_LCD_STATUS2		= REG_LCD(0x82),
++	GLAMO_REG_LCD_STATUS3		= REG_LCD(0x84),
++	GLAMO_REG_LCD_STATUS4		= REG_LCD(0x86),
++	/* RES */
++	GLAMO_REG_LCD_COMMAND1		= REG_LCD(0xa0),
++	GLAMO_REG_LCD_COMMAND2		= REG_LCD(0xa2),
++	/* RES */
++	GLAMO_REG_LCD_WFORM_DELAY1	= REG_LCD(0xb0),
++	GLAMO_REG_LCD_WFORM_DELAY2	= REG_LCD(0xb2),
++	/* RES */
++	GLAMO_REG_LCD_GAMMA_CORR	= REG_LCD(0x100),
++	/* RES */
++	GLAMO_REG_LCD_GAMMA_R_ENTRY01	= REG_LCD(0x110),
++	GLAMO_REG_LCD_GAMMA_R_ENTRY23	= REG_LCD(0x112),
++	GLAMO_REG_LCD_GAMMA_R_ENTRY45	= REG_LCD(0x114),
++	GLAMO_REG_LCD_GAMMA_R_ENTRY67	= REG_LCD(0x116),
++	GLAMO_REG_LCD_GAMMA_R_ENTRY8	= REG_LCD(0x118),
++	/* RES */
++	GLAMO_REG_LCD_GAMMA_G_ENTRY01	= REG_LCD(0x130),
++	GLAMO_REG_LCD_GAMMA_G_ENTRY23	= REG_LCD(0x132),
++	GLAMO_REG_LCD_GAMMA_G_ENTRY45	= REG_LCD(0x134),
++	GLAMO_REG_LCD_GAMMA_G_ENTRY67	= REG_LCD(0x136),
++	GLAMO_REG_LCD_GAMMA_G_ENTRY8	= REG_LCD(0x138),
++	/* RES */
++	GLAMO_REG_LCD_GAMMA_B_ENTRY01	= REG_LCD(0x150),
++	GLAMO_REG_LCD_GAMMA_B_ENTRY23	= REG_LCD(0x152),
++	GLAMO_REG_LCD_GAMMA_B_ENTRY45	= REG_LCD(0x154),
++	GLAMO_REG_LCD_GAMMA_B_ENTRY67	= REG_LCD(0x156),
++	GLAMO_REG_LCD_GAMMA_B_ENTRY8	= REG_LCD(0x158),
++	/* RES */
++	GLAMO_REG_LCD_SRAM_DRIVING1	= REG_LCD(0x160),
++	GLAMO_REG_LCD_SRAM_DRIVING2	= REG_LCD(0x162),
++	GLAMO_REG_LCD_SRAM_DRIVING3	= REG_LCD(0x164),
++};
++
++enum glamo_reg_lcd_mode1 {
++	GLAMO_LCD_MODE1_PWRSAVE		= 0x0001,
++	GLAMO_LCD_MODE1_PARTIAL_PRT	= 0x0002,
++	GLAMO_LCD_MODE1_HWFLIP		= 0x0004,
++	GLAMO_LCD_MODE1_LCD2		= 0x0008,
++	/* RES */
++	GLAMO_LCD_MODE1_PARTIAL_MODE	= 0x0020,
++	GLAMO_LCD_MODE1_CURSOR_DSTCOLOR	= 0x0040,
++	GLAMO_LCD_MODE1_PARTIAL_ENABLE	= 0x0080,
++	GLAMO_LCD_MODE1_TVCLK_IN_ENABLE	= 0x0100,
++	GLAMO_LCD_MODE1_HSYNC_HIGH_ACT	= 0x0200,
++	GLAMO_LCD_MODE1_VSYNC_HIGH_ACT	= 0x0400,
++	GLAMO_LCD_MODE1_HSYNC_FLIP	= 0x0800,
++	GLAMO_LCD_MODE1_GAMMA_COR_EN	= 0x1000,
++	GLAMO_LCD_MODE1_DITHER_EN	= 0x2000,
++	GLAMO_LCD_MODE1_CURSOR_EN	= 0x4000,
++	GLAMO_LCD_MODE1_ROTATE_EN	= 0x8000,
++};
++
++enum glamo_reg_lcd_mode2 {
++	GLAMO_LCD_MODE2_CRC_CHECK_EN	= 0x0001,
++	GLAMO_LCD_MODE2_DCMD_PER_LINE	= 0x0002,
++	GLAMO_LCD_MODE2_NOUSE_BDEF	= 0x0004,
++	GLAMO_LCD_MODE2_OUT_POS_MODE	= 0x0008,
++	GLAMO_LCD_MODE2_FRATE_CTRL_EN	= 0x0010,
++	GLAMO_LCD_MODE2_SINGLE_BUFFER	= 0x0020,
++	GLAMO_LCD_MODE2_SER_LSB_TO_MSB	= 0x0040,
++	/* FIXME */
++};
++
++enum glamo_reg_lcd_mode3 {
++	/* LCD color source data format */
++	GLAMO_LCD_SRC_RGB565		= 0x0000,
++	GLAMO_LCD_SRC_ARGB1555		= 0x4000,
++	GLAMO_LCD_SRC_ARGB4444		= 0x8000,
++	/* interface type */
++	GLAMO_LCD_MODE3_LCD		= 0x1000,
++	GLAMO_LCD_MODE3_RGB		= 0x0800,
++	GLAMO_LCD_MODE3_CPU		= 0x0000,
++	/* mode */
++	GLAMO_LCD_MODE3_RGB332		= 0x0000,
++	GLAMO_LCD_MODE3_RGB444		= 0x0100,
++	GLAMO_LCD_MODE3_RGB565		= 0x0200,
++	GLAMO_LCD_MODE3_RGB666		= 0x0300,
++	/* depth */
++	GLAMO_LCD_MODE3_6BITS		= 0x0000,
++	GLAMO_LCD_MODE3_8BITS		= 0x0010,
++	GLAMO_LCD_MODE3_9BITS		= 0x0020,
++	GLAMO_LCD_MODE3_16BITS		= 0x0030,
++	GLAMO_LCD_MODE3_18BITS		= 0x0040,
++};
++
++enum glamo_lcd_rot_mode {
++	GLAMO_LCD_ROT_MODE_0            = 0x0000,
++	GLAMO_LCD_ROT_MODE_180          = 0x2000,
++	GLAMO_LCD_ROT_MODE_MIRROR       = 0x4000,
++	GLAMO_LCD_ROT_MODE_FLIP         = 0x6000,
++	GLAMO_LCD_ROT_MODE_90           = 0x8000,
++	GLAMO_LCD_ROT_MODE_270          = 0xa000,
++};
++#define GLAMO_LCD_ROT_MODE_MASK         0xe000
++
++enum glamo_lcd_cmd_type {
++	GLAMO_LCD_CMD_TYPE_DISP		 = 0x0000,
++	GLAMO_LCD_CMD_TYPE_PARALLEL	 = 0x4000,
++	GLAMO_LCD_CMD_TYPE_SERIAL	 = 0x8000,
++	GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT = 0xc000,
++};
++#define GLAMO_LCD_CMD_TYPE_MASK		0xc000
++
++enum glamo_lcd_cmds {
++	GLAMO_LCD_CMD_DATA_DISP_FIRE	= 0x00,
++	GLAMO_LCD_CMD_DATA_DISP_SYNC	= 0x01,		/* RGB only */
++	/* switch to command mode, no display */
++	GLAMO_LCD_CMD_DATA_FIRE_NO_DISP	= 0x02,
++	/* display until VSYNC, switch to command */
++	GLAMO_LCD_CMD_DATA_FIRE_VSYNC	= 0x11,
++	/* display until HSYNC, switch to command */
++	GLAMO_LCD_CMD_DATA_FIRE_HSYNC	= 0x12,
++	/* display until VSYNC, 1 black frame, VSYNC, switch to command */
++	GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B	= 0x13,
++	/* don't care about display and switch to command */
++	GLAMO_LCD_CMD_DATA_FIRE_FREE	= 0x14,		/* RGB only */
++	/* don't care about display, keep data display but disable data,
++	 * and switch to command */
++	GLAMO_LCD_CMD_DATA_FIRE_FREE_D	= 0x15,		/* RGB only */
++};
++
++enum glamo_core_revisions {
++	GLAMO_CORE_REV_A0		= 0x0000,
++	GLAMO_CORE_REV_A1		= 0x0001,
++	GLAMO_CORE_REV_A2		= 0x0002,
++	GLAMO_CORE_REV_A3		= 0x0003,
++};
++
++#endif /* _GLAMO_REGS_H */
+diff --git a/include/linux/mfd/glamo.h b/include/linux/mfd/glamo.h
+new file mode 100644
+index 0000000..b8dfaef
+--- /dev/null
++++ b/include/linux/mfd/glamo.h
+@@ -0,0 +1,53 @@
++#ifndef __GLAMO_MFD_H
++#define __GLAMO_MFD_H
++
++struct glamo_core;
++struct glamo_spigpio_platform_data;
++struct glamo_fb_platform_data;
++
++struct glamo_mmc_platform_data {
++	int	(*glamo_mmc_use_slow)(void);
++
++	unsigned nonremovable:1;
++
++	struct glamo_core *core;
++};
++
++struct glamo_gpio_platform_data {
++	int base;
++};
++
++struct glamo_platform_data {
++	struct glamo_fb_platform_data	*fb_data;
++	struct glamo_mmc_platform_data	*mmc_data;
++	struct glamo_gpio_platform_data	*gpio_data;
++
++	unsigned int osci_clock_rate;
++
++	void (*glamo_external_reset)(int);
++};
++
++enum glamo_engine {
++	GLAMO_ENGINE_CAPTURE = 0,
++	GLAMO_ENGINE_ISP = 1,
++	GLAMO_ENGINE_JPEG = 2,
++	GLAMO_ENGINE_MPEG_ENC = 3,
++	GLAMO_ENGINE_MPEG_DEC = 4,
++	GLAMO_ENGINE_LCD = 5,
++	GLAMO_ENGINE_CMDQ = 6,
++	GLAMO_ENGINE_2D = 7,
++	GLAMO_ENGINE_3D = 8,
++	GLAMO_ENGINE_MMC = 9,
++	GLAMO_ENGINE_MICROP0 = 10,
++	GLAMO_ENGINE_RISC = 11,
++	GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
++	GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
++#if 0
++	GLAMO_ENGINE_H264_DEC = 14,
++	GLAMO_ENGINE_RISC1 = 15,
++	GLAMO_ENGINE_SPI = 16,
++#endif
++	__NUM_GLAMO_ENGINES
++};
++
++#endif
+diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
+index 50d4a04..bec3cb7 100644
+--- a/include/linux/mfd/pcf50633/core.h
++++ b/include/linux/mfd/pcf50633/core.h
+@@ -1,4 +1,5 @@
+ /*
++
+  * core.h  -- Core driver for NXP PCF50633
+  *
+  * (C) 2006-2008 by Openmoko, Inc.
+@@ -14,7 +15,6 @@
+ #define __LINUX_MFD_PCF50633_CORE_H
+ 
+ #include <linux/i2c.h>
+-#include <linux/workqueue.h>
+ #include <linux/regulator/driver.h>
+ #include <linux/regulator/machine.h>
+ #include <linux/power_supply.h>
+@@ -46,21 +46,10 @@ struct pcf50633_platform_data {
+ 	u8 resumers[5];
+ 
+ 	struct pcf50633_bl_platform_data *backlight_data;
+-};
+ 
+-struct pcf50633_irq {
+-	void (*handler) (int, void *);
+-	void *data;
++	int gpio_base;
+ };
+ 
+-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+-			void (*handler) (int, void *), void *data);
+-int pcf50633_free_irq(struct pcf50633 *pcf, int irq);
+-
+-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
+-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
+-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
+-
+ int pcf50633_read_block(struct pcf50633 *, u8 reg,
+ 					int nr_regs, u8 *data);
+ int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
+@@ -138,12 +127,11 @@ struct pcf50633 {
+ 
+ 	struct pcf50633_platform_data *pdata;
+ 	int irq;
+-	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
+-	struct work_struct irq_work;
+-	struct workqueue_struct *work_queue;
+ 	struct mutex lock;
++	struct mutex irq_lock;
+ 
+ 	u8 mask_regs[5];
++	u8 mask_regs_cur[5];
+ 
+ 	u8 suspend_irq_masks[5];
+ 	u8 resume_reason[5];
+@@ -151,12 +139,11 @@ struct pcf50633 {
+ 
+ 	int onkey1s_held;
+ 
+-	struct platform_device *rtc_pdev;
+-	struct platform_device *mbc_pdev;
+-	struct platform_device *adc_pdev;
+-	struct platform_device *input_pdev;
+-	struct platform_device *bl_pdev;
+-	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
++	unsigned int irq_base;
++
++	struct pcf50633_mbc *mbc;
++	struct pcf50633_adc *adc;
++	struct pcf50633_bl *bl;
+ };
+ 
+ enum pcf50633_reg_int1 {
+diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
+index a42b845..af2c341 100644
+--- a/include/linux/mfd/pcf50633/gpio.h
++++ b/include/linux/mfd/pcf50633/gpio.h
+@@ -15,37 +15,40 @@
+ 
+ #include <linux/mfd/pcf50633/core.h>
+ 
+-#define PCF50633_GPIO1		1
+-#define PCF50633_GPIO2		2
+-#define PCF50633_GPIO3		3
+-#define PCF50633_GPO		4
+-
+-#define PCF50633_REG_GPIO1CFG	0x14
+-#define PCF50633_REG_GPIO2CFG	0x15
+-#define PCF50633_REG_GPIO3CFG	0x16
+-#define PCF50633_REG_GPOCFG 	0x17
+-
+-#define PCF50633_GPOCFG_GPOSEL_MASK	0x07
+-
+-enum pcf50633_reg_gpocfg {
+-	PCF50633_GPOCFG_GPOSEL_0	= 0x00,
+-	PCF50633_GPOCFG_GPOSEL_LED_NFET	= 0x01,
+-	PCF50633_GPOCFG_GPOSEL_SYSxOK	= 0x02,
+-	PCF50633_GPOCFG_GPOSEL_CLK32K	= 0x03,
+-	PCF50633_GPOCFG_GPOSEL_ADAPUSB	= 0x04,
+-	PCF50633_GPOCFG_GPOSEL_USBxOK	= 0x05,
+-	PCF50633_GPOCFG_GPOSEL_ACTPH4	= 0x06,
+-	PCF50633_GPOCFG_GPOSEL_1	= 0x07,
+-	PCF50633_GPOCFG_GPOSEL_INVERSE	= 0x08,
++#define PCF50633_GPIO1		0
++#define PCF50633_GPIO2		1
++#define PCF50633_GPIO3		2
++#define PCF50633_GPO		3
++
++#define PCF50633_REG_GPIOCFG(x) (0x14 + (x))
++
++enum pcf50633_gpio_config {
++	PCF50633_GPIO_CONFIG_OUTPUT	= 0x0,
++	PCF50633_GPIO_CONFIG_SYSxOK	= 0x2,
++	PCF50633_GPIO_CONFIG_CHARGING	= 0x3,
++	PCF50633_GPIO_CONFIG_MOBILE_MODE = 0x4,
++	PCF50633_GPIO_CONFIG_USBxOK	= 0x5,
++	PCF50633_GPIO_CONFIG_ACTPH	= 0x6,
++	PCF50633_GPIO_CONFIG_INPUT	= 0x7,
++
++	PCF50633_GPIO_CONFIG_INVERT	= 0x8,
++
++	PCF50633_GPO_CONFIG_OUTPUT	= 0x0,
++	PCF50633_GPO_CONFIG_LED_NFET	= 0x1,
++	PCF50633_GPO_CONFIG_SYSxOK	= 0x2,
++	PCF50633_GPO_CONFIG_CLK32K	= 0x3,
++	PCF50633_GPO_CONFIG_MOBILE_MODE = 0x4,
++	PCF50633_GPO_CONFIG_USBxOK	= 0x5,
++	PCF50633_GPO_CONFIG_ACTPH	= 0x6,
++	PCF50633_GPO_CONFIG_INPUT	= 0x7,
++
++	PCF50633_GPO_CONFIG_INVERT	= 0x8,
+ };
+ 
+-int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
+-u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
++int pcf50633_gpio_set_config(struct pcf50633 *pcf, unsigned gpio,
++                              enum pcf50633_gpio_config config);
+ 
+-int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
+-int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
+-
+-int pcf50633_gpio_power_supply_set(struct pcf50633 *,
++int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
+ 					int gpio, int regulator, int on);
+ #endif /* __LINUX_MFD_PCF50633_GPIO_H */
+ 
+diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
+index 07f27af..5bbfb71 100644
+--- a/include/linux/mmc/core.h
++++ b/include/linux/mmc/core.h
+@@ -117,6 +117,7 @@ struct mmc_data {
+ 
+ 	unsigned int		sg_len;		/* size of scatter list */
+ 	struct scatterlist	*sg;		/* I/O scatter list */
++	s32			host_cookie;	/* host private data */
+ };
+ 
+ struct mmc_request {
+@@ -124,13 +125,19 @@ struct mmc_request {
+ 	struct mmc_data		*data;
+ 	struct mmc_command	*stop;
+ 
+-	void			*done_data;	/* completion data */
++	struct completion	completion;
+ 	void			(*done)(struct mmc_request *);/* completion function */
+ };
+ 
+ struct mmc_host;
+ struct mmc_card;
+ 
++extern void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
++			bool is_first_req);
++extern void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
++			 int err);
++extern void mmc_start_req(struct mmc_host *host, struct mmc_request *mrq);
++extern void mmc_wait_for_req_done(struct mmc_request *mrq);
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
+index bcb793e..8b2b44b 100644
+--- a/include/linux/mmc/host.h
++++ b/include/linux/mmc/host.h
+@@ -88,6 +88,15 @@ struct mmc_host_ops {
+ 	 */
+ 	int (*enable)(struct mmc_host *host);
+ 	int (*disable)(struct mmc_host *host, int lazy);
++	/*
++	 * It is optional for the host to implement pre_req and post_req in
++	 * order to support double buffering of requests (prepare one
++	 * request while another request is active).
++	 */
++	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
++			    int err);
++	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req,
++			   bool is_first_req);
+ 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+ 	/*
+ 	 * Avoid calling these three functions too often or in a "fast path",
+@@ -242,7 +251,9 @@ struct mmc_host {
+ #endif
+ 
+ 	struct dentry		*debugfs_root;
+-
++#ifdef CONFIG_FAIL_MMC_REQUEST
++	u8			make_it_fail;
++#endif
+ 	unsigned long		private[0] ____cacheline_aligned;
+ };
+ 
+diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
+index a36ab3b..c2bb43b 100644
+--- a/include/linux/mmc/sdio_ids.h
++++ b/include/linux/mmc/sdio_ids.h
+@@ -44,4 +44,9 @@
+ #define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
+ #define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
+ 
++#define SDIO_DEVICE_ID_MARVELL_88W8688		0x9104
++#define SDIO_VENDOR_ID_ATHEROS			0x0271
++#define SDIO_DEVICE_ID_ATHEROS_AR6001		0x0100
++#define SDIO_DEVICE_ID_ATHEROS_AR6002		0x0200
++
+ #endif
+diff --git a/include/linux/platform_battery.h b/include/linux/platform_battery.h
+new file mode 100644
+index 0000000..00f7651
+--- /dev/null
++++ b/include/linux/platform_battery.h
+@@ -0,0 +1,12 @@
++#ifndef __PLATFORM_BATTERY_H__
++#define __PLATFORM_BATTERY_H__
++
++struct platform_bat_platform_data {
++	const char *name;
++	int (**get_property)(void);
++	int (*is_present)(void);
++	enum power_supply_property *properties;
++	size_t num_properties;
++};
++
++#endif
+diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
+index c768bcd..330fc70 100644
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -1057,6 +1057,17 @@ config FAIL_IO_TIMEOUT
+ 	  Only works with drivers that use the generic timeout handling,
+ 	  for others it wont do anything.
+ 
++config FAIL_MMC_REQUEST
++	bool "Fault-injection capability for MMC IO"
++	select DEBUG_FS
++	depends on FAULT_INJECTION
++	help
++	  Provide fault-injection capability for MMC IO.
++	  This will make the mmc core return data errors. This is
++	  useful for testing the error handling in the mmc block device
++	  and how the mmc host driver handle retries from
++	  the block device.
++
+ config FAULT_INJECTION_DEBUG_FS
+ 	bool "Debugfs entries for fault-injection capabilities"
+ 	depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
+index 4522309..4f845fe 100644
+--- a/sound/soc/samsung/neo1973_wm8753.c
++++ b/sound/soc/samsung/neo1973_wm8753.c
+@@ -27,6 +27,9 @@
+ #include "../codecs/wm8753.h"
+ #include "s3c24xx-i2s.h"
+ 
++/* HACK */
++#define machine_is_neo1973_gta01() (0)
++
+ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
+ 	struct snd_pcm_hw_params *params)
+ {
diff --git a/recipes/linux/linux-2.6.39.2/shr.patch b/recipes/linux/linux-2.6.39.2/shr.patch
new file mode 100644
index 0000000000..7ff30cd593
--- /dev/null
+++ b/recipes/linux/linux-2.6.39.2/shr.patch
@@ -0,0 +1,4130 @@
+All patches from shr kernel repository
+rebased on top of openmoko kernel repository
+
+https://gitorious.org/shr/linux/commits/shr-2.6.39-nodrm
+
+c2046f23 lis302dl: use ABS events rather then REL events
+d51b2df input: lis302dl: fix the resume path
+9157619 lis302dl accelerometer driver
+0f0f23a Force GPS power up on resume if it were powered up on suspend
+1c83000 Fix high power consumption in suspend
+8dae2c6 wm8753: use snd_soc_jack on neo1973
+104353d ar6000_delay.patch
+235c131 usbhost.patch
+e342a4d Enable powering off after 8s POWER press
+b9dfb66 glamo-display: fix WSOD for 242 timming
+d952c22 Openmoko resume reason sysfs node ported from 2.6.29
+2d7ec7a nand/s3c2410: add mising badblocksbits value
+2a067d5 glamo-mci: revert changes for Per's patchset
+d9b3bc8 Revert "mmc: add none blocking mmc request function"
+a194e92 Revert "mmc: mmc_test: add debugfs file to list all tests"
+8a3a7aa Revert "mmc: mmc_test: add test for none blocking transfers"
+711299a Revert "mmc: add member in mmc queue struct to hold request data"
+101511c Revert "mmc: add a block request prepare function"
+023e4b8 Revert "mmc: move error code in mmc_block_issue_rw_rq to a separate function."
+6dd67d8 Revert "mmc: add a second mmc queue request member"
+cc53cf6 Revert "mmc: add handling for two parallel block requests in issue_rw_rq"
+76cc5df Revert "mmc: test: add random fault injection in core.c"
+
+diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
+index 035d116..16d9855 100644
+--- a/arch/arm/mach-s3c2440/Makefile
++++ b/arch/arm/mach-s3c2440/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+ 	gta02-pm-bt.o \
+ 	gta02-pm-gps.o \
+ 	gta02-pm-gsm.o \
++	gta02-pm-usbhost.o \
+ 	gta02-pm-wlan.o \
+ 	gta02-fiq.o \
+ 	gta02-hdq.o \
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-gps.c b/arch/arm/mach-s3c2440/gta02-pm-gps.c
+index 4ca3ac6..7501978 100644
+--- a/arch/arm/mach-s3c2440/gta02-pm-gps.c
++++ b/arch/arm/mach-s3c2440/gta02-pm-gps.c
+@@ -42,7 +42,7 @@ int gta02_pm_gps_is_on(void)
+ EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+ 
+ /* This is the POWERON pin */
+-static void gps_pwron_set(int on)
++static void gps_pwron_set(int on, int ignore_state)
+ {
+ 	if (on) {
+ 		/* return UART pins to being UART pins */
+@@ -50,7 +50,7 @@ static void gps_pwron_set(int on)
+ 		/* remove pulldown now it won't be floating any more */
+ 		s3c_gpio_setpull(S3C2410_GPH(5), S3C_GPIO_PULL_NONE);
+ 
+-		if (!gta02_gps.power_was_on)
++		if (!gta02_gps.power_was_on || ignore_state)
+ 			regulator_enable(gta02_gps.regulator);
+ 	} else {
+ 		/*
+@@ -61,7 +61,7 @@ static void gps_pwron_set(int on)
+ 		gpio_set_value(S3C2410_GPH(4), 0);
+ 		/* don't let RX from unpowered GPS float */
+ 		s3c_gpio_setpull(S3C2410_GPH(5), S3C_GPIO_PULL_DOWN);
+-		if (gta02_gps.power_was_on)
++		if (gta02_gps.power_was_on || ignore_state)
+ 			regulator_disable(gta02_gps.regulator);
+ 	}
+ }
+@@ -113,7 +113,7 @@ static ssize_t power_gps_write(struct device *dev,
+ 		return ret;
+ 
+ 	if (!strcmp(attr->attr.name, "power_on")) {
+-		gps_pwron_set(on);
++		gps_pwron_set(on, 0);
+ 		gta02_gps.power_was_on = !!on;
+ #ifdef CONFIG_PM
+ 	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+@@ -128,7 +128,7 @@ static int gta02_pm_gps_suspend(struct device *dev)
+ {
+ 	if (!gta02_gps.keep_on_in_suspend ||
+ 		!gta02_gps.power_was_on)
+-		gps_pwron_set(0);
++		gps_pwron_set(0, 0);
+ 	else
+ 		dev_warn(dev, "GTA02: keeping gps ON "
+ 			 "during suspend\n");
+@@ -138,7 +138,7 @@ static int gta02_pm_gps_suspend(struct device *dev)
+ static int gta02_pm_gps_resume(struct device *dev)
+ {
+ 	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+-		gps_pwron_set(1);
++		gps_pwron_set(1, 1);
+ 
+ 	return 0;
+ }
+diff --git a/arch/arm/mach-s3c2440/gta02-pm-usbhost.c b/arch/arm/mach-s3c2440/gta02-pm-usbhost.c
+new file mode 100644
+index 0000000..233340a
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/gta02-pm-usbhost.c
+@@ -0,0 +1,174 @@
++/*
++ * USBHOST Management code for the Openmoko Freerunner GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/console.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/regulator/consumer.h>
++
++#include <mach/gpio.h>
++#include <asm/mach-types.h>
++
++#include <mach/hardware.h>
++
++#include <mach/gta02.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++
++static struct regulator *gta02_usbhost_regulator;
++
++static ssize_t usbhost_read(struct device *dev, struct device_attribute *attr,
++			char *buf)
++{
++	if (!strcmp(attr->attr.name, "power_on")) {
++		if (regulator_is_enabled(gta02_usbhost_regulator))
++			goto out_1;
++	}
++
++	return strlcpy(buf, "0\n", 3);
++out_1:
++	return strlcpy(buf, "1\n", 3);
++}
++
++static void usbhost_on_off(struct device *dev, int on)
++{
++
++	on = !!on;
++
++	if (on == regulator_is_enabled(gta02_usbhost_regulator))
++		return;
++
++	if (!on) {
++		regulator_disable(gta02_usbhost_regulator);
++		return;
++	}
++
++	regulator_enable(gta02_usbhost_regulator);
++}
++
++static ssize_t usbhost_write(struct device *dev, struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++	unsigned long on = simple_strtoul(buf, NULL, 10);
++
++	if (!strcmp(attr->attr.name, "power_on")) {
++		usbhost_on_off(dev, on);
++
++		return count;
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, usbhost_read, usbhost_write);
++
++#ifdef CONFIG_PM
++
++static int gta02_usbhost_suspend(struct device *dev)
++{
++	return 0;
++}
++
++static int gta02_usbhost_suspend_late(struct device *dev)
++{
++	return 0;
++}
++
++static int gta02_usbhost_resume(struct device *dev)
++{
++	return 0;
++}
++
++static struct dev_pm_ops gta02_usbhost_pm_ops = {
++	.suspend	= gta02_usbhost_suspend,
++	.suspend_noirq	= gta02_usbhost_suspend_late,
++	.resume		= gta02_usbhost_resume,
++};
++
++#define GTA02_USBHOST_PM_OPS (&gta02_usbhost_pm_ops)
++
++#else
++#define GTA02_USBHOST_PM_OPS NULL
++#endif /* CONFIG_PM */
++
++static struct attribute *gta02_usbhost_sysfs_entries[] = {
++	&dev_attr_power_on.attr,
++	NULL
++};
++
++static struct attribute_group gta02_usbhost_attr_group = {
++	.name	= NULL,
++	.attrs	= gta02_usbhost_sysfs_entries,
++};
++
++static int __init gta02_usbhost_probe(struct platform_device *pdev)
++{
++	int ret;
++
++	gta02_usbhost_regulator = regulator_get_exclusive(&pdev->dev, "USBHOST");
++
++	if (IS_ERR(gta02_usbhost_regulator)) {
++		ret = PTR_ERR(gta02_usbhost_regulator);
++		dev_err(&pdev->dev, "Failed to get regulator: %d\n", ret);
++		return ret;
++	}
++
++	ret = sysfs_create_group(&pdev->dev.kobj, &gta02_usbhost_attr_group);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to create sysfs entries: %d\n", ret);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int gta02_usbhost_remove(struct platform_device *pdev)
++{
++	usbhost_on_off(&pdev->dev, 0);
++
++	sysfs_remove_group(&pdev->dev.kobj, &gta02_usbhost_attr_group);
++	regulator_put(gta02_usbhost_regulator);
++
++	return 0;
++}
++
++static struct platform_driver gta02_usbhost_driver = {
++	.probe		= gta02_usbhost_probe,
++	.remove		= gta02_usbhost_remove,
++	.driver		= {
++		.name	= "gta02-pm-usbhost",
++		.pm	= GTA02_USBHOST_PM_OPS,
++	},
++};
++
++static int __devinit gta02_usbhost_init(void)
++{
++	return platform_driver_register(&gta02_usbhost_driver);
++}
++module_init(gta02_usbhost_init);
++
++static void gta02_usbhost_exit(void)
++{
++	platform_driver_unregister(&gta02_usbhost_driver);
++}
++module_exit(gta02_usbhost_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Openmoko Freerunner USBHOST Power Management");
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index aa31b8d..6f82f5a 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -62,6 +62,7 @@
+ 
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
++#include <linux/lis302dl.h>
+ 
+ #include <linux/leds.h>
+ #include <linux/leds_pwm.h>
+@@ -127,6 +128,10 @@ static long gta02_panic_blink(int state)
+ 	return delay;
+ }
+ 
++struct platform_device gta02_resume_reason_device = {
++	.name 		= "neo1973-resume",
++	.num_resources	= 0,
++};
+ 
+ static struct map_desc gta02_iodesc[] __initdata = {
+ 	{
+@@ -177,6 +182,10 @@ static struct platform_device gta02_pm_gsm_dev = {
+ 	.name = "gta02-pm-gsm",
+ };
+ 
++static struct platform_device gta02_pm_usbhost_dev = {
++	.name = "gta02-pm-usbhost",
++};
++
+ static struct platform_device gta02_pm_wlan_dev = {
+ 	.name = "gta02-pm-wlan",
+ };
+@@ -186,6 +195,11 @@ static struct regulator_consumer_supply gsm_supply_consumer = {
+ 	.supply = "GSM",
+ };
+ 
++static struct regulator_consumer_supply usbhost_supply_consumer = {
++	.dev = &gta02_pm_usbhost_dev.dev,
++	.supply = "USBHOST",
++};
++
+ static struct regulator_init_data gsm_supply_init_data = {
+ 	.constraints = {
+ 		.min_uV = 3700000,
+@@ -197,6 +211,17 @@ static struct regulator_init_data gsm_supply_init_data = {
+ 	.consumer_supplies = &gsm_supply_consumer,
+ };
+ 
++static struct regulator_init_data usbhost_supply_init_data = {
++	.constraints = {
++		.min_uV = 3700000,
++		.max_uV = 3700000,
++		.valid_modes_mask = REGULATOR_MODE_NORMAL,
++		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies = 1,
++	.consumer_supplies = &usbhost_supply_consumer,
++};
++
+ static struct fixed_voltage_config gsm_supply_config = {
+ 	.supply_name = "GSM",
+ 	.microvolts = 3700000,
+@@ -205,6 +230,14 @@ static struct fixed_voltage_config gsm_supply_config = {
+ 	.init_data = &gsm_supply_init_data,
+ };
+ 
++static struct fixed_voltage_config usbhost_supply_config = {
++	.supply_name = "USBHOST",
++	.microvolts = 3700000,
++	.gpio = GTA02_GPIO_PCF(PCF50633_GPO),
++	.enable_high = 1,
++	.init_data = &usbhost_supply_init_data,
++};
++
+ static struct platform_device gta02_gsm_supply_device = {
+ 	.name = "reg-fixed-voltage",
+ 	.id = 1,
+@@ -213,6 +246,14 @@ static struct platform_device gta02_gsm_supply_device = {
+ 	},
+ };
+ 
++static struct platform_device gta02_usbhost_supply_device = {
++	.name = "reg-fixed-voltage",
++	.id = 2,
++	.dev = {
++		.platform_data = &usbhost_supply_config,
++	},
++};
++
+ /*
+  * we crank down SD Card clock dynamically when GPS is powered
+  */
+@@ -297,6 +338,202 @@ static struct glamo_platform_data gta02_glamo_pdata = {
+ 	.glamo_external_reset = gta02_glamo_external_reset,
+ };
+ 
++/* SPI: Accelerometers attached to SPI of s3c244x */
++
++/*
++ * Situation is that Linux SPI can't work in an interrupt context, so we
++ * implement our own bitbang here.  Arbitration is needed because not only
++ * can this interrupt happen at any time even if foreground wants to use
++ * the bitbang API from Linux, but multiple motion sensors can be on the
++ * same SPI bus, and multiple interrupts can happen.
++ *
++ * Foreground / interrupt arbitration is okay because the interrupts are
++ * disabled around all the foreground SPI code.
++ *
++ * Interrupt / Interrupt arbitration is evidently needed, otherwise we
++ * lose edge-triggered service after a while due to the two sensors sharing
++ * the SPI bus having irqs at the same time eventually.
++ *
++ * Servicing is typ 75 - 100us at 400MHz.
++ */
++
++/* #define DEBUG_SPEW_MS */
++#define MG_PER_SAMPLE 18
++
++struct lis302dl_platform_data lis302_pdata_top;
++struct lis302dl_platform_data lis302_pdata_bottom;
++
++/*
++ * generic SPI RX and TX bitbang
++ * only call with interrupts off!
++ */
++
++static void __gta02_lis302dl_bitbang(struct lis302dl_info *lis, u8 *tx,
++					     int tx_bytes, u8 *rx, int rx_bytes)
++{
++	struct lis302dl_platform_data *pdata = lis->pdata;
++	int n;
++	u8 shifter = 0;
++	unsigned long other_cs;
++
++	/*
++	 * Huh... "quirk"... CS on this device is not really "CS" like you can
++	 * expect.
++	 *
++	 * When it is 0 it selects SPI interface mode.
++	 * When it is 1 it selects I2C interface mode.
++	 *
++	 * Because we have 2 devices on one interface we have to make sure
++	 * that the "disabled" device (actually in I2C mode) don't think we're
++	 * talking to it.
++	 *
++	 * When we talk to the "enabled" device, the "disabled" device sees
++	 * the clocks as I2C clocks, creating havoc.
++	 *
++	 * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
++	 * must ensure this is never issued.
++	 */
++
++	if (&lis302_pdata_top == pdata)
++		other_cs = lis302_pdata_bottom.pin_chip_select;
++	else
++		other_cs = lis302_pdata_top.pin_chip_select;
++
++	s3c2410_gpio_setpin(other_cs, 1);
++	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
++	s3c2410_gpio_setpin(pdata->pin_clk, 1);
++	s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
++
++	/* send the register index, r/w and autoinc bits */
++	for (n = 0; n < (tx_bytes << 3); n++) {
++		if (!(n & 7))
++			shifter = ~tx[n >> 3];
++		s3c2410_gpio_setpin(pdata->pin_clk, 0);
++		s3c2410_gpio_setpin(pdata->pin_mosi, !(shifter & 0x80));
++		s3c2410_gpio_setpin(pdata->pin_clk, 1);
++		shifter <<= 1;
++	}
++
++	for (n = 0; n < (rx_bytes << 3); n++) { /* 8 bits each */
++		s3c2410_gpio_setpin(pdata->pin_clk, 0);
++		shifter <<= 1;
++		if (s3c2410_gpio_getpin(pdata->pin_miso))
++			shifter |= 1;
++		if ((n & 7) == 7)
++			rx[n >> 3] = shifter;
++		s3c2410_gpio_setpin(pdata->pin_clk, 1);
++	}
++	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
++	s3c2410_gpio_setpin(other_cs, 1);
++}
++
++
++static int gta02_lis302dl_bitbang_read_reg(struct lis302dl_info *lis, u8 reg)
++{
++	u8 data = 0xc0 | reg; /* read, autoincrement */
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	__gta02_lis302dl_bitbang(lis, &data, 1, &data, 1);
++
++	local_irq_restore(flags);
++
++	return data;
++}
++
++static void gta02_lis302dl_bitbang_write_reg(struct lis302dl_info *lis, u8 reg,
++									 u8 val)
++{
++	u8 data[2] = { 0x00 | reg, val }; /* write, no autoincrement */
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	__gta02_lis302dl_bitbang(lis, &data[0], 2, NULL, 0);
++
++	local_irq_restore(flags);
++
++}
++
++
++void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
++{
++	struct lis302dl_platform_data *pdata = lis->pdata;
++
++	if (!resume) {
++		 /*
++		 * we don't want to power them with a high level
++		 * because GSENSOR_3V3 is not up during suspend
++		 */
++		s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
++		s3c2410_gpio_setpin(pdata->pin_clk, 0);
++		s3c2410_gpio_setpin(pdata->pin_mosi, 0);
++		/* misnomer: it is a pullDOWN in 2442 */
++		s3c2410_gpio_pullup(pdata->pin_miso, 1);
++		return;
++	}
++
++	/* back to normal */
++	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
++	s3c2410_gpio_setpin(pdata->pin_clk, 1);
++	/* misnomer: it is a pullDOWN in 2442 */
++	s3c2410_gpio_pullup(pdata->pin_miso, 0);
++
++	s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
++	s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
++	s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
++	s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
++
++}
++
++
++
++struct lis302dl_platform_data lis302_pdata_top = {
++		.name		= "lis302-1 (top)",
++		.pin_chip_select= S3C2410_GPD(12),
++		.pin_clk	= S3C2410_GPG(7),
++		.pin_mosi	= S3C2410_GPG(6),
++		.pin_miso	= S3C2410_GPG(5),
++		.interrupt	= GTA02_IRQ_GSENSOR_1,
++		.open_drain	= 1, /* altered at runtime by PCB rev */
++		.lis302dl_bitbang = __gta02_lis302dl_bitbang,
++		.lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg,
++		.lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg,
++		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
++struct lis302dl_platform_data lis302_pdata_bottom = {
++		.name		= "lis302-2 (bottom)",
++		.pin_chip_select= S3C2410_GPD(13),
++		.pin_clk	= S3C2410_GPG(7),
++		.pin_mosi	= S3C2410_GPG(6),
++		.pin_miso	= S3C2410_GPG(5),
++		.interrupt	= GTA02_IRQ_GSENSOR_2,
++		.open_drain	= 1, /* altered at runtime by PCB rev */
++		.lis302dl_bitbang = __gta02_lis302dl_bitbang,
++		.lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg,
++		.lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg,
++		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
++
++static struct platform_device s3c_device_spi_acc1 = {
++	.name		  = "lis302dl",
++	.id		  = 1,
++	.dev = {
++		.platform_data = &lis302_pdata_top,
++	},
++};
++
++static struct platform_device s3c_device_spi_acc2 = {
++	.name		  = "lis302dl",
++	.id		  = 2,
++	.dev = {
++		.platform_data = &lis302_pdata_bottom,
++	},
++};
++
+ /* JBT6k74 display controller */
+ static void gta02_jbt6k74_probe_completed(struct device *dev)
+ {
+@@ -487,6 +724,11 @@ static struct regulator_consumer_supply hcldo_consumers[] = {
+ 	},
+ };
+ 
++static void gta02_poweroff(void)
++{
++	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
++}
++
+ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 	.resumers = {
+ 		[0] =	PCF50633_INT1_USBINS |
+@@ -522,7 +764,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 				.min_uV = 1300000,
+ 				.max_uV = 1600000,
+ 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+-				.always_on = 1,
++				.always_on = 0,
+ 				.apply_uV = 1,
+ 			},
+ 		},
+@@ -614,6 +856,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
+ 	},
+ 	.probe_done = gta02_pmu_attach_child_devices,
+ 	.mbc_event_callback = gta02_pmu_event_callback,
++	.force_shutdown = gta02_poweroff,
+ };
+ 
+ 
+@@ -1053,6 +1296,9 @@ static struct platform_device *gta02_devices[] __initdata = {
+ static struct platform_device *gta02_devices_pmu_children[] = {
+ 	&gta02_hdq_device,
+ 	&gta02_platform_bat,
++	&gta02_resume_reason_device,
++	&s3c_device_spi_acc1,
++	&s3c_device_spi_acc2,
+ };
+ 
+ 
+@@ -1080,11 +1326,6 @@ static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+ 			     ARRAY_SIZE(gta02_devices_pmu_children));
+ }
+ 
+-static void gta02_poweroff(void)
+-{
+-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+-}
+-
+ struct gta02_device_children {
+ 	const char *dev_name;
+ 	size_t num_children;
+@@ -1098,12 +1339,17 @@ static struct platform_device *gta02_glamo_gpio_children[] = {
+ 
+ static struct platform_device *gta02_pcf50633_gpio_children[] = {
+ 	&gta02_gsm_supply_device,
++	&gta02_usbhost_supply_device,
+ };
+ 
+ static struct platform_device *gta02_gsm_supply_children[] = {
+ 	&gta02_pm_gsm_dev,
+ };
+ 
++static struct platform_device* gta02_usbhost_supply_children[] = {
++	&gta02_pm_usbhost_dev,
++};
++
+ static struct platform_device *gta02_hdq_children[] = {
+ 	&bq27000_battery_device,
+ };
+@@ -1126,6 +1372,11 @@ static struct gta02_device_children gta02_device_children[] = {
+ 		.children = gta02_gsm_supply_children,
+ 	},
+ 	{
++		.dev_name = "reg-fixed-voltage.2",
++		.num_children = 1,
++		.children = gta02_usbhost_supply_children,
++	},
++	{
+ 		.dev_name = "spi2.0",
+ 		.probed_callback = gta02_jbt6k74_probe_completed,
+ 	},
+@@ -1199,6 +1450,10 @@ static void __init gta02_machine_init(void)
+ 
+ 	s3c_pm_init();
+ 
++	/* we need push-pull interrupt from motion sensors */
++	lis302_pdata_top.open_drain = 0;
++	lis302_pdata_bottom.open_drain = 0;
++
+ #ifdef CONFIG_CHARGER_PCF50633
+ 	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+ #endif
+diff --git a/drivers/ar6000/hif/hif2.c b/drivers/ar6000/hif/hif2.c
+index 386d96e..90178d0 100644
+--- a/drivers/ar6000/hif/hif2.c
++++ b/drivers/ar6000/hif/hif2.c
+@@ -517,6 +517,8 @@ static int ar6000_do_activate(struct hif_device *hif)
+ 		goto out_func_ready;
+ 	}
+ 
++	mdelay (10);
++
+ 	ret = htcCallbacks.deviceInsertedHandler(hif);
+ 	if (ret == A_OK)
+ 		return 0;
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index f9cf088..fb6c6aa 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -467,4 +467,13 @@ config INPUT_XEN_KBDDEV_FRONTEND
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called xen-kbdfront.
+ 
++config INPUT_LIS302DL
++	tristate "STmicro LIS302DL 3-axis accelerometer"
++	depends on SPI_MASTER
++	help
++	  SPI driver for the STmicro LIS302DL 3-axis accelerometer.
++
++	  The userspece interface is a 3-axis (X/Y/Z) relative movement
++	  Linux input device, reporting REL_[XYZ] events.
++
+ endif
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index e3f7984..e341378 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -44,4 +44,5 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_LIS302DL)		+= lis302dl.o
+ 
+diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
+new file mode 100644
+index 0000000..1ba7a8f
+--- /dev/null
++++ b/drivers/input/misc/lis302dl.c
+@@ -0,0 +1,898 @@
++/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
++ *
++ * Copyright (C) 2007-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *         converted to private bitbang by:
++ *         Andy Green <andy@openmoko.com>
++ *         ability to set acceleration threshold added by:
++ *         Simon Kagstrom <simon.kagstrom@gmail.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * TODO
++ * 	* statistics for overflow events
++ * 	* configuration interface (sysfs) for
++ * 		* enable/disable x/y/z axis data ready
++ * 		* enable/disable resume from freee fall / click
++ * 		* free fall / click parameters
++ * 		* high pass filter parameters
++ */
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/sysfs.h>
++
++#include <linux/lis302dl.h>
++
++/* Utility functions */
++static u8 __reg_read(struct lis302dl_info *lis, u8 reg)
++{
++	return (lis->pdata->lis302dl_bitbang_reg_read)(lis, reg);
++}
++
++static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val)
++{
++	(lis->pdata->lis302dl_bitbang_reg_write)(lis, reg, val);
++}
++
++static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
++		u8 val)
++{
++	u_int8_t tmp;
++
++	val &= mask;
++
++	tmp = __reg_read(lis, reg);
++	tmp &= ~mask;
++	tmp |= val;
++	__reg_write(lis, reg, tmp);
++}
++
++static int __ms_to_duration(struct lis302dl_info *lis, int ms)
++{
++	/* If we have 400 ms sampling rate, the stepping is 2.5 ms,
++	 * on 100 ms the stepping is 10ms */
++	if (lis->flags & LIS302DL_F_DR)
++		return min((ms * 10) / 25, 637);
++
++	return min(ms / 10, 2550);
++}
++
++static int __duration_to_ms(struct lis302dl_info *lis, int duration)
++{
++	if (lis->flags & LIS302DL_F_DR)
++		return (duration * 25) / 10;
++
++	return duration * 10;
++}
++
++static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg)
++{
++	/* If FS is set each bit is 71mg, otherwise 18mg. The THS register
++	 * has 7 bits for the threshold value */
++	if (lis->flags & LIS302DL_F_FS)
++		return min(mg / 71, 127);
++
++	return min(mg / 18, 127);
++}
++
++static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold)
++{
++	if (lis->flags & LIS302DL_F_FS)
++		return threshold * 71;
++
++	return threshold * 18;
++}
++
++/* interrupt handling related */
++
++enum lis302dl_intmode {
++	LIS302DL_INTMODE_GND		= 0x00,
++	LIS302DL_INTMODE_FF_WU_1	= 0x01,
++	LIS302DL_INTMODE_FF_WU_2	= 0x02,
++	LIS302DL_INTMODE_FF_WU_12	= 0x03,
++	LIS302DL_INTMODE_DATA_READY	= 0x04,
++	LIS302DL_INTMODE_CLICK		= 0x07,
++};
++
++static void __lis302dl_int_mode(struct device *dev, int int_pin,
++			      enum lis302dl_intmode mode)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	switch (int_pin) {
++	case 1:
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
++		break;
++	case 2:
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
++		break;
++	default:
++		BUG();
++	}
++}
++
++static void __enable_wakeup(struct lis302dl_info *lis)
++{
++	__reg_write(lis, LIS302DL_REG_CTRL1, 0);
++
++	/* First zero to get to a known state */
++	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
++			LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
++			LIS302DL_FFWUCFG_LIR);
++	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++			__mg_to_threshold(lis, lis->wakeup.threshold));
++	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++			__ms_to_duration(lis, lis->wakeup.duration));
++
++	/* Route the interrupt for wakeup */
++	__lis302dl_int_mode(lis->dev, 1,
++			LIS302DL_INTMODE_FF_WU_1);
++
++	__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++	__reg_read(lis, LIS302DL_REG_OUT_X);
++	__reg_read(lis, LIS302DL_REG_OUT_Y);
++	__reg_read(lis, LIS302DL_REG_OUT_Z);
++	__reg_read(lis, LIS302DL_REG_STATUS);
++	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
++}
++
++static void __enable_data_collection(struct lis302dl_info *lis)
++{
++	u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
++			 LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
++
++	/* make sure we're powered up and generate data ready */
++	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
++
++	/* If the threshold is zero, let the device generated an interrupt
++	 * on each datum */
++	if (lis->threshold == 0) {
++		__reg_write(lis, LIS302DL_REG_CTRL2, 0);
++		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
++		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
++	} else {
++		__reg_write(lis, LIS302DL_REG_CTRL2,
++				LIS302DL_CTRL2_HPFF1);
++		__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++				__mg_to_threshold(lis, lis->threshold));
++		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++				__ms_to_duration(lis, lis->duration));
++
++		/* Clear the HP filter "starting point" */
++		__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++		__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
++				LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
++				LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
++		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
++		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
++	}
++}
++
++#if 0
++static void _report_btn_single(struct input_dev *inp, int btn)
++{
++	input_report_key(inp, btn, 1);
++	input_sync(inp);
++	input_report_key(inp, btn, 0);
++}
++
++static void _report_btn_double(struct input_dev *inp, int btn)
++{
++	input_report_key(inp, btn, 1);
++	input_sync(inp);
++	input_report_key(inp, btn, 0);
++	input_sync(inp);
++	input_report_key(inp, btn, 1);
++	input_sync(inp);
++	input_report_key(inp, btn, 0);
++}
++#endif
++
++
++static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
++{
++	u8 data = 0xc0 | LIS302DL_REG_STATUS; /* read, autoincrement */
++	u8 read[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 1];
++	unsigned long flags;
++	int mg_per_sample = __threshold_to_mg(lis, 1);
++
++	/* grab the set of register containing status and XYZ data */
++
++	local_irq_save(flags);
++	(lis->pdata->lis302dl_bitbang)(lis, &data, 1, &read[0], sizeof(read));
++	local_irq_restore(flags);
++
++	/*
++	 * at the minute the test below fails 50% of the time due to
++	 * a problem with level interrupts causing ISRs to get called twice.
++	 * This is a workaround for that, but actually this test is still
++	 * valid and the information can be used for overrrun stats.
++	 */
++
++	/* has any kind of overrun been observed by the lis302dl? */
++	if (read[0] & (LIS302DL_STATUS_XOR |
++		       LIS302DL_STATUS_YOR |
++		       LIS302DL_STATUS_ZOR))
++		lis->overruns++;
++
++	/* we have a valid sample set? */
++	if (read[0] & LIS302DL_STATUS_XYZDA) {
++		input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
++			    (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
++		input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
++			    (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
++		input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
++			    (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
++
++		input_sync(lis->input_dev);
++	}
++
++	if (lis->threshold)
++		/* acknowledge the wakeup source */
++		__reg_read(lis,	LIS302DL_REG_FF_WU_SRC_1);
++}
++
++static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
++{
++	struct lis302dl_info *lis = _lis;
++
++	lis302dl_bitbang_read_sample(lis);
++	return IRQ_HANDLED;
++}
++
++/* sysfs */
++
++static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
++			 char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", lis->overruns);
++}
++
++static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
++
++static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
++			 char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	u8 ctrl1;
++	unsigned long flags;
++
++	local_irq_save(flags);
++	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++	local_irq_restore(flags);
++
++	return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
++}
++
++static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
++			const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	if (!strcmp(buf, "400\n")) {
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++				 LIS302DL_CTRL1_DR);
++		lis->flags |= LIS302DL_F_DR;
++	} else {
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++				0);
++		lis->flags &= ~LIS302DL_F_DR;
++	}
++	local_irq_restore(flags);
++
++	return count;
++}
++
++static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
++
++static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
++			  char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	u_int8_t ctrl1;
++	unsigned long flags;
++
++	local_irq_save(flags);
++	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++	local_irq_restore(flags);
++
++	return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
++}
++
++static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	if (!strcmp(buf, "9.2\n")) {
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++				 LIS302DL_CTRL1_FS);
++		lis->flags |= LIS302DL_F_FS;
++	} else {
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++				0);
++		lis->flags &= ~LIS302DL_F_FS;
++	}
++
++	if (lis->flags & LIS302DL_F_INPUT_OPEN)
++		__enable_data_collection(lis);
++
++	local_irq_restore(flags);
++
++	return count;
++}
++
++static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
++
++static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
++		 char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	/* Display the device view of the threshold setting */
++	return sprintf(buf, "%d\n", __threshold_to_mg(lis,
++			__mg_to_threshold(lis, lis->threshold)));
++}
++
++static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
++		 const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned int val;
++
++	if (sscanf(buf, "%u\n", &val) != 1)
++		return -EINVAL;
++	/* 8g is the maximum if FS is 1 */
++	if (val > 8000)
++		return -ERANGE;
++
++	/* Set the threshold and write it out if the device is used */
++	lis->threshold = val;
++
++	if (lis->flags & LIS302DL_F_INPUT_OPEN) {
++		unsigned long flags;
++
++		local_irq_save(flags);
++		__enable_data_collection(lis);
++		local_irq_restore(flags);
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
++
++static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
++		 char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%d\n", __duration_to_ms(lis,
++			__ms_to_duration(lis, lis->duration)));
++}
++
++static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
++		 const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned int val;
++
++	if (sscanf(buf, "%u\n", &val) != 1)
++		return -EINVAL;
++	if (val > 2550)
++		return -ERANGE;
++
++	lis->duration = val;
++	if (lis->flags & LIS302DL_F_INPUT_OPEN)
++		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++				__ms_to_duration(lis, lis->duration));
++
++	return count;
++}
++
++static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
++
++static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
++								      char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	int n = 0;
++	u8 reg[0x40];
++	char *end = buf;
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	for (n = 0; n < sizeof(reg); n++)
++		reg[n] = __reg_read(lis, n);
++
++	local_irq_restore(flags);
++
++	for (n = 0; n < sizeof(reg); n += 16) {
++		hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
++		end += strlen(end);
++		*end++ = '\n';
++		*end++ = '\0';
++	}
++
++	return end - buf;
++}
++static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
++
++/* Configure freefall/wakeup interrupts */
++static ssize_t set_wakeup_threshold(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned int threshold;
++
++	if (sscanf(buf, "%u\n", &threshold) != 1)
++		return -EINVAL;
++
++	if (threshold > 8000)
++		return -ERANGE;
++
++	/* Zero turns the feature off */
++	if (threshold == 0) {
++		if (lis->flags & LIS302DL_F_IRQ_WAKE) {
++			disable_irq_wake(lis->pdata->interrupt);
++			lis->flags &= ~LIS302DL_F_IRQ_WAKE;
++		}
++
++		return count;
++	}
++
++	lis->wakeup.threshold = threshold;
++
++	if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
++		enable_irq_wake(lis->pdata->interrupt);
++		lis->flags |= LIS302DL_F_IRQ_WAKE;
++	}
++
++	return count;
++}
++
++static ssize_t show_wakeup_threshold(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	/* All events off? */
++	if (lis->wakeup.threshold == 0)
++		return sprintf(buf, "off\n");
++
++	return sprintf(buf, "%u\n", lis->wakeup.threshold);
++}
++
++static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
++		set_wakeup_threshold);
++
++static ssize_t set_wakeup_duration(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++	unsigned int duration;
++
++	if (sscanf(buf, "%u\n", &duration) != 1)
++		return -EINVAL;
++
++	if (duration > 2550)
++		return -ERANGE;
++
++	lis->wakeup.duration = duration;
++
++	return count;
++}
++
++static ssize_t show_wakeup_duration(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++	return sprintf(buf, "%u\n", lis->wakeup.duration);
++}
++
++static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
++		set_wakeup_duration);
++
++static struct attribute *lis302dl_sysfs_entries[] = {
++	&dev_attr_sample_rate.attr,
++	&dev_attr_full_scale.attr,
++	&dev_attr_threshold.attr,
++	&dev_attr_duration.attr,
++	&dev_attr_dump.attr,
++	&dev_attr_wakeup_threshold.attr,
++	&dev_attr_wakeup_duration.attr,
++	&dev_attr_overruns.attr,
++	NULL
++};
++
++static struct attribute_group lis302dl_attr_group = {
++	.name	= NULL,
++	.attrs	= lis302dl_sysfs_entries,
++};
++
++/* input device handling and driver core interaction */
++
++static int lis302dl_input_open(struct input_dev *inp)
++{
++	struct lis302dl_info *lis = input_get_drvdata(inp);
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	__enable_data_collection(lis);
++	lis->flags |= LIS302DL_F_INPUT_OPEN;
++
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++static void lis302dl_input_close(struct input_dev *inp)
++{
++	struct lis302dl_info *lis = input_get_drvdata(inp);
++	u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
++			 LIS302DL_CTRL1_Zen;
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	/* since the input core already serializes access and makes sure we
++	 * only see close() for the close of the last user, we can safely
++	 * disable the data ready events */
++	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
++	lis->flags &= ~LIS302DL_F_INPUT_OPEN;
++
++	/* however, don't power down the whole device if still needed */
++	if (!(lis->flags & LIS302DL_F_WUP_FF ||
++	      lis->flags & LIS302DL_F_WUP_CLICK)) {
++		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
++				 0x00);
++	}
++	local_irq_restore(flags);
++}
++
++/* get the device to reload its coefficients from EEPROM and wait for it
++ * to complete
++ */
++
++static int __lis302dl_reset_device(struct lis302dl_info *lis)
++{
++	int timeout = 10;
++
++	__reg_write(lis, LIS302DL_REG_CTRL2,
++			LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
++
++	while ((__reg_read(lis, LIS302DL_REG_CTRL2)
++			& LIS302DL_CTRL2_BOOT) && (timeout--))
++		mdelay(1);
++
++	return !!(timeout < 0);
++}
++
++static int __devinit lis302dl_probe(struct platform_device *pdev)
++{
++	int rc;
++	struct lis302dl_info *lis;
++	u_int8_t wai;
++	unsigned long flags;
++	struct lis302dl_platform_data *pdata = pdev->dev.platform_data;
++
++	lis = kzalloc(sizeof(*lis), GFP_KERNEL);
++	if (!lis)
++		return -ENOMEM;
++
++	lis->dev = &pdev->dev;
++
++	dev_set_drvdata(lis->dev, lis);
++
++	lis->pdata = pdata;
++
++	rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
++	if (rc) {
++		dev_err(lis->dev, "error creating sysfs group\n");
++		goto bail_free_lis;
++	}
++
++	/* initialize input layer details */
++	lis->input_dev = input_allocate_device();
++	if (!lis->input_dev) {
++		dev_err(lis->dev, "Unable to allocate input device\n");
++		goto bail_sysfs;
++	}
++
++	input_set_drvdata(lis->input_dev, lis);
++	lis->input_dev->name = pdata->name;
++	 /* SPI Bus not defined as a valid bus for input subsystem*/
++	lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
++	lis->input_dev->open = lis302dl_input_open;
++	lis->input_dev->close = lis302dl_input_close;
++
++	rc = input_register_device(lis->input_dev);
++	if (rc) {
++		dev_err(lis->dev, "error %d registering input device\n", rc);
++		goto bail_inp_dev;
++	}
++
++	local_irq_save(flags);
++	/* Configure our IO */
++	(lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++	wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I);
++	if (wai != LIS302DL_WHO_AM_I_MAGIC) {
++		dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
++		dev_set_drvdata(lis->dev, NULL);
++		rc = -ENODEV;
++		local_irq_restore(flags);
++		goto bail_inp_reg;
++	}
++
++	set_bit(EV_ABS, lis->input_dev->evbit);
++	input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
++	input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
++	input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
++	
++
++	lis->threshold = 0;
++	lis->duration = 0;
++	memset(&lis->wakeup, 0, sizeof(lis->wakeup));
++
++	if (__lis302dl_reset_device(lis))
++		dev_err(lis->dev, "device BOOT reload failed\n");
++
++	/* force us powered */
++	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
++			LIS302DL_CTRL1_Xen |
++			LIS302DL_CTRL1_Yen |
++			LIS302DL_CTRL1_Zen);
++	mdelay(1);
++
++	__reg_write(lis, LIS302DL_REG_CTRL2, 0);
++	__reg_write(lis, LIS302DL_REG_CTRL3,
++			LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
++	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
++	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
++
++	/* start off in powered down mode; we power up when someone opens us */
++	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
++			LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
++
++	if (pdata->open_drain)
++		/* switch interrupt to open collector, active-low */
++		__reg_write(lis, LIS302DL_REG_CTRL3,
++				LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++	else
++		/* push-pull, active-low */
++		__reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
++
++	__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
++	__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
++
++	__reg_read(lis, LIS302DL_REG_STATUS);
++	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++	__reg_read(lis, LIS302DL_REG_CLICK_SRC);
++	local_irq_restore(flags);
++
++	dev_info(lis->dev, "Found %s\n", pdata->name);
++
++	lis->pdata = pdata;
++
++	set_irq_handler(lis->pdata->interrupt, handle_level_irq);
++
++	rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
++			 IRQF_TRIGGER_LOW, "lis302dl", lis);
++	
++	if (rc < 0) {
++		dev_err(lis->dev, "error requesting IRQ %d\n",
++			lis->pdata->interrupt);
++		goto bail_inp_reg;
++	}
++	return 0;
++
++bail_inp_reg:
++	input_unregister_device(lis->input_dev);
++bail_inp_dev:
++	input_free_device(lis->input_dev);
++bail_sysfs:
++	sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
++bail_free_lis:
++	kfree(lis);
++	return rc;
++}
++
++static int __devexit lis302dl_remove(struct platform_device *pdev)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
++	unsigned long flags;
++
++	/* Disable interrupts */
++	if (lis->flags & LIS302DL_F_IRQ_WAKE)
++		disable_irq_wake(lis->pdata->interrupt);
++	free_irq(lis->pdata->interrupt, lis);
++
++	/* Reset and power down the device */
++	local_irq_save(flags);
++	__reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
++	__reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
++	__reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
++	local_irq_restore(flags);
++
++	/* Cleanup resources */
++	sysfs_remove_group(&pdev->dev.kobj, &lis302dl_attr_group);
++	input_unregister_device(lis->input_dev);
++	if (lis->input_dev)
++		input_free_device(lis->input_dev);
++	dev_set_drvdata(lis->dev, NULL);
++	kfree(lis);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static u8 regs_to_save[] = {
++	LIS302DL_REG_CTRL2,
++	LIS302DL_REG_CTRL3,
++	LIS302DL_REG_FF_WU_CFG_1,
++	LIS302DL_REG_FF_WU_THS_1,
++	LIS302DL_REG_FF_WU_DURATION_1,
++	LIS302DL_REG_FF_WU_CFG_2,
++	LIS302DL_REG_FF_WU_THS_2,
++	LIS302DL_REG_FF_WU_DURATION_2,
++	LIS302DL_REG_CLICK_CFG,
++	LIS302DL_REG_CLICK_THSY_X,
++	LIS302DL_REG_CLICK_THSZ,
++	LIS302DL_REG_CLICK_TIME_LIMIT,
++	LIS302DL_REG_CLICK_LATENCY,
++	LIS302DL_REG_CLICK_WINDOW,
++	LIS302DL_REG_CTRL1,
++};
++
++static int lis302dl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
++	unsigned long flags;
++	u_int8_t tmp;
++	int n;
++
++	/* determine if we want to wake up from the accel. */
++	if (lis->flags & LIS302DL_F_WUP_CLICK)
++		return 0;
++
++	disable_irq(lis->pdata->interrupt);
++	local_irq_save(flags);
++
++	/*
++	 * When we share SPI over multiple sensors, there is a race here
++	 * that one or more sensors will lose.  In that case, the shared
++	 * SPI bus GPIO will be in sleep mode and partially pulled down.  So
++	 * we explicitly put our IO into "wake" mode here before the final
++	 * traffic to the sensor.
++	 */
++	(lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++	/* save registers */
++	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++		lis->regs[regs_to_save[n]] =
++			__reg_read(lis, regs_to_save[n]);
++
++	/* power down or enable wakeup */
++
++	if (lis->wakeup.threshold == 0) {
++		tmp = __reg_read(lis, LIS302DL_REG_CTRL1);
++		tmp &= ~LIS302DL_CTRL1_PD;
++		__reg_write(lis, LIS302DL_REG_CTRL1, tmp);
++	} else
++		__enable_wakeup(lis);
++
++	/* place our IO to the device in sleep-compatible states */
++	(lis->pdata->lis302dl_suspend_io)(lis, 0);
++
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++static int lis302dl_resume(struct platform_device *pdev)
++{
++	struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
++	unsigned long flags;
++	int n;
++
++	if (lis->flags & LIS302DL_F_WUP_CLICK)
++		return 0;
++
++	local_irq_save(flags);
++
++	/* get our IO to the device back in operational states */
++	(lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++	/* resume from powerdown first! */
++	__reg_write(lis, LIS302DL_REG_CTRL1,
++			LIS302DL_CTRL1_PD |
++			LIS302DL_CTRL1_Xen |
++			LIS302DL_CTRL1_Yen |
++			LIS302DL_CTRL1_Zen);
++	mdelay(1);
++
++	if (__lis302dl_reset_device(lis))
++		dev_err(&pdev->dev, "device BOOT reload failed\n");
++
++	/* restore registers after resume */
++	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++		__reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
++
++	/* if someone had us open, reset the non-wake threshold stuff */
++	if (lis->flags & LIS302DL_F_INPUT_OPEN)
++		__enable_data_collection(lis);
++
++	local_irq_restore(flags);
++	enable_irq(lis->pdata->interrupt);
++
++	return 0;
++}
++#else
++#define lis302dl_suspend	NULL
++#define lis302dl_resume		NULL
++#endif
++
++static struct platform_driver lis302dl_driver = {
++	.driver = {
++		.name	= "lis302dl",
++		.owner	= THIS_MODULE,
++	},
++
++	.probe	 = lis302dl_probe,
++	.remove	 = __devexit_p(lis302dl_remove),
++	.suspend = lis302dl_suspend,
++	.resume	 = lis302dl_resume,
++};
++
++static int __devinit lis302dl_init(void)
++{
++	return platform_driver_register(&lis302dl_driver);
++}
++
++static void __exit lis302dl_exit(void)
++{
++	platform_driver_unregister(&lis302dl_driver);
++}
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(lis302dl_init);
++module_exit(lis302dl_exit);
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 4e007c6..c3f53c7 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -475,6 +475,13 @@ config PCH_PHUB
+ 	  To compile this driver as a module, choose M here: the module will
+ 	  be called pch_phub.
+ 
++config OPENMOKO_RESUME_REASON
++	tristate "Openmoko resume reason driver"
++	depends on SYSFS
++	help
++	  This driver adds a sysfs entry for accessing the resume reason
++          of the openmoko board.
++
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
+ source "drivers/misc/cb710/Kconfig"
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index f546860..702855a 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -43,4 +43,5 @@ obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
+ obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
+ obj-y				+= ti-st/
+ obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
++obj-$(CONFIG_OPENMOKO_RESUME_REASON)   += neo1973_pm_resume_reason.o
+ obj-y				+= lis3lv02d/
+diff --git a/drivers/misc/neo1973_pm_resume_reason.c b/drivers/misc/neo1973_pm_resume_reason.c
+new file mode 100644
+index 0000000..5bcc818
+--- /dev/null
++++ b/drivers/misc/neo1973_pm_resume_reason.c
+@@ -0,0 +1,142 @@
++/*
++ * Resume reason sysfs for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2008 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License resume_reason 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/core.h>
++#endif
++
++static unsigned int *gstatus4_mapped;
++static char *resume_reasons[][17] = { { /* GTA01 */
++	"EINT00_NULL",
++	"EINT01_GSM",
++	"EINT02_NULL",
++	"EINT03_NULL",
++	"EINT04_JACK",
++	"EINT05_SDCARD",
++	"EINT06_AUXKEY",
++	"EINT07_HOLDKEY",
++	"EINT08_NULL",
++	"EINT09_NULL",
++	"EINT10_NULL",
++	"EINT11_NULL",
++	"EINT12_NULL",
++	"EINT13_NULL",
++	"EINT14_NULL",
++	"EINT15_NULL",
++	NULL
++}, { /* GTA02 */
++	"EINT00_ACCEL1",
++	"EINT01_GSM",
++	"EINT02_BLUETOOTH",
++	"EINT03_DEBUGBRD",
++	"EINT04_JACK",
++	"EINT05_WLAN",
++	"EINT06_AUXKEY",
++	"EINT07_HOLDKEY",
++	"EINT08_ACCEL2",
++	"EINT09_PMU",
++	"EINT10_NULL",
++	"EINT11_NULL",
++	"EINT12_GLAMO",
++	"EINT13_NULL",
++	"EINT14_NULL",
++	"EINT15_NULL",
++	NULL
++} };
++
++static ssize_t resume_reason_read(struct device *dev,
++				  struct device_attribute *attr,
++				  char *buf)
++{
++	int bit = 0;
++	char *end = buf;
++	int gta = !!machine_is_neo1973_gta02();
++
++	for (bit = 0; resume_reasons[gta][bit]; bit++) {
++		if ((*gstatus4_mapped) & (1 << bit))
++			end += sprintf(end, "* %s\n", resume_reasons[gta][bit]);
++		else
++			end += sprintf(end, "  %s\n", resume_reasons[gta][bit]);
++	}
++
++	return end - buf;
++}
++
++
++static DEVICE_ATTR(resume_reason, 0644, resume_reason_read, NULL);
++
++static struct attribute *neo1973_resume_reason_sysfs_entries[] = {
++	&dev_attr_resume_reason.attr,
++	NULL
++};
++
++static struct attribute_group neo1973_resume_reason_attr_group = {
++	.name	= NULL,
++	.attrs	= neo1973_resume_reason_sysfs_entries,
++};
++
++static int __init neo1973_resume_reason_probe(struct platform_device *pdev)
++{
++	dev_info(&pdev->dev, "starting\n");
++
++	gstatus4_mapped = ioremap(0x560000BC /* GSTATUS4 */, 0x4);
++	if (!gstatus4_mapped) {
++		dev_err(&pdev->dev, "failed to ioremap() memory region\n");
++		return -EINVAL;
++	}
++
++	return sysfs_create_group(&pdev->dev.kobj,
++					    &neo1973_resume_reason_attr_group);
++}
++
++static int neo1973_resume_reason_remove(struct platform_device *pdev)
++{
++	sysfs_remove_group(&pdev->dev.kobj, &neo1973_resume_reason_attr_group);
++	iounmap(gstatus4_mapped);
++	return 0;
++}
++
++static struct platform_driver neo1973_resume_reason_driver = {
++	.probe		= neo1973_resume_reason_probe,
++	.remove		= neo1973_resume_reason_remove,
++	.driver		= {
++		.name		= "neo1973-resume",
++	},
++};
++
++static int __devinit neo1973_resume_reason_init(void)
++{
++	return platform_driver_register(&neo1973_resume_reason_driver);
++}
++
++static void neo1973_resume_reason_exit(void)
++{
++	platform_driver_unregister(&neo1973_resume_reason_driver);
++}
++
++module_init(neo1973_resume_reason_init);
++module_exit(neo1973_resume_reason_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 resume_reason");
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 4b530ae..61d233a 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -79,13 +79,6 @@ struct mmc_blk_data {
+ 
+ static DEFINE_MUTEX(open_lock);
+ 
+-enum mmc_blk_status {
+-	MMC_BLK_SUCCESS = 0,
+-	MMC_BLK_RETRY,
+-	MMC_BLK_DATA_ERR,
+-	MMC_BLK_CMD_ERR,
+-};
+-
+ module_param(perdev_minors, int, 0444);
+ MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
+ 
+@@ -172,6 +165,13 @@ static const struct block_device_operations mmc_bdops = {
+ 	.owner			= THIS_MODULE,
+ };
+ 
++struct mmc_blk_request {
++	struct mmc_request	mrq;
++	struct mmc_command	cmd;
++	struct mmc_command	stop;
++	struct mmc_data		data;
++};
++
+ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
+ {
+ 	int err;
+@@ -331,341 +331,200 @@ out:
+ 	return err ? 0 : 1;
+ }
+ 
+-static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
+-			       struct mmc_card *card,
+-			       int disable_multi,
+-			       struct mmc_queue *mq)
++static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+ {
+-	u32 readcmd, writecmd;
+-	struct mmc_blk_request *brq = &mqrq->brq;
+-	struct request *req = mqrq->req;
+-
+-	memset(brq, 0, sizeof(struct mmc_blk_request));
+-
+-	brq->mrq.cmd = &brq->cmd;
+-	brq->mrq.data = &brq->data;
+-
+-	brq->cmd.arg = blk_rq_pos(req);
+-	if (!mmc_card_blockaddr(card))
+-		brq->cmd.arg <<= 9;
+-	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+-	brq->data.blksz = 512;
+-	brq->stop.opcode = MMC_STOP_TRANSMISSION;
+-	brq->stop.arg = 0;
+-	brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+-	brq->data.blocks = blk_rq_sectors(req);
++	struct mmc_blk_data *md = mq->data;
++	struct mmc_card *card = md->queue.card;
++	struct mmc_blk_request brq;
++	int ret = 1, disable_multi = 0;
+ 
+-	/*
+-	 * The block layer doesn't support all sector count
+-	 * restrictions, so we need to be prepared for too big
+-	 * requests.
+-	 */
+-	if (brq->data.blocks > card->host->max_blk_count)
+-		brq->data.blocks = card->host->max_blk_count;
++	mmc_claim_host(card->host);
+ 
+-	/*
+-	 * After a read error, we redo the request one sector at a time
+-	 * in order to accurately determine which sectors can be read
+-	 * successfully.
+-	 */
+-	if (disable_multi && brq->data.blocks > 1)
+-		brq->data.blocks = 1;
++	do {
++		struct mmc_command cmd;
++		u32 readcmd, writecmd, status = 0;
++
++		memset(&brq, 0, sizeof(struct mmc_blk_request));
++		brq.mrq.cmd = &brq.cmd;
++		brq.mrq.data = &brq.data;
++
++		brq.cmd.arg = blk_rq_pos(req);
++		if (!mmc_card_blockaddr(card))
++			brq.cmd.arg <<= 9;
++		brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
++		brq.data.blksz = 512;
++		brq.stop.opcode = MMC_STOP_TRANSMISSION;
++		brq.stop.arg = 0;
++		brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
++		brq.data.blocks = blk_rq_sectors(req);
+ 
+-	if (brq->data.blocks > 1) {
+-		/* SPI multiblock writes terminate using a special
+-		 * token, not a STOP_TRANSMISSION request.
++		/*
++		 * The block layer doesn't support all sector count
++		 * restrictions, so we need to be prepared for too big
++		 * requests.
+ 		 */
+-		if (!mmc_host_is_spi(card->host)
+-		    || rq_data_dir(req) == READ)
+-			brq->mrq.stop = &brq->stop;
+-		readcmd = MMC_READ_MULTIPLE_BLOCK;
+-		writecmd = MMC_WRITE_MULTIPLE_BLOCK;
+-	} else {
+-		brq->mrq.stop = NULL;
+-		readcmd = MMC_READ_SINGLE_BLOCK;
+-		writecmd = MMC_WRITE_BLOCK;
+-	}
+-	if (rq_data_dir(req) == READ) {
+-		brq->cmd.opcode = readcmd;
+-		brq->data.flags |= MMC_DATA_READ;
+-	} else {
+-		brq->cmd.opcode = writecmd;
+-		brq->data.flags |= MMC_DATA_WRITE;
+-	}
+-
+-	mmc_set_data_timeout(&brq->data, card);
++		if (brq.data.blocks > card->host->max_blk_count)
++			brq.data.blocks = card->host->max_blk_count;
+ 
+-	brq->data.sg = mqrq->sg;
+-	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
++		/*
++		 * After a read error, we redo the request one sector at a time
++		 * in order to accurately determine which sectors can be read
++		 * successfully.
++		 */
++		if (disable_multi && brq.data.blocks > 1)
++			brq.data.blocks = 1;
+ 
+-	/*
+-	 * Adjust the sg list so it is the same size as the
+-	 * request.
+-	 */
+-	if (brq->data.blocks != blk_rq_sectors(req)) {
+-		int i, data_size = brq->data.blocks << 9;
+-		struct scatterlist *sg;
+-
+-		for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+-			data_size -= sg->length;
+-			if (data_size <= 0) {
+-				sg->length += data_size;
+-				i++;
+-				break;
+-			}
++		if (brq.data.blocks > 1) {
++			/* SPI multiblock writes terminate using a special
++			 * token, not a STOP_TRANSMISSION request.
++			 */
++			if (!mmc_host_is_spi(card->host)
++					|| rq_data_dir(req) == READ)
++				brq.mrq.stop = &brq.stop;
++			readcmd = MMC_READ_MULTIPLE_BLOCK;
++			writecmd = MMC_WRITE_MULTIPLE_BLOCK;
++		} else {
++			brq.mrq.stop = NULL;
++			readcmd = MMC_READ_SINGLE_BLOCK;
++			writecmd = MMC_WRITE_BLOCK;
+ 		}
+-		brq->data.sg_len = i;
+-	}
+-
+-	mmc_queue_bounce_pre(mqrq);
+-}
+-
+-static enum mmc_blk_status mmc_blk_get_status(struct mmc_blk_request *brq,
+-					      struct request *req,
+-					      struct mmc_card *card,
+-					      struct mmc_blk_data *md)
+-{
+-	struct mmc_command cmd;
+-	u32 status;
+-	enum mmc_blk_status ret = MMC_BLK_SUCCESS;
+-
+-	/*
+-	 * Check for errors here, but don't jump to cmd_err
+-	 * until later as we need to wait for the card to leave
+-	 * programming mode even when things go wrong.
+-	 */
+-	if (brq->cmd.error || brq->data.error || brq->stop.error) {
+-		if (brq->data.blocks > 1 && rq_data_dir(req) == READ) {
+-			/* Redo read one sector at a time */
+-			printk(KERN_WARNING "%s: retrying using single "
+-			       "block read, brq %p\n",
+-			       req->rq_disk->disk_name, brq);
+-			ret = MMC_BLK_RETRY;
+-			goto out;
++		if (rq_data_dir(req) == READ) {
++			brq.cmd.opcode = readcmd;
++			brq.data.flags |= MMC_DATA_READ;
++		} else {
++			brq.cmd.opcode = writecmd;
++			brq.data.flags |= MMC_DATA_WRITE;
+ 		}
+-		status = get_card_status(card, req);
+-	}
+ 
+-	if (brq->cmd.error) {
+-		printk(KERN_ERR "%s: error %d sending read/write "
+-		       "command, response %#x, card status %#x\n",
+-		       req->rq_disk->disk_name, brq->cmd.error,
+-		       brq->cmd.resp[0], status);
+-	}
+-
+-	if (brq->data.error) {
+-		if (brq->data.error == -ETIMEDOUT && brq->mrq.stop)
+-			/* 'Stop' response contains card status */
+-			status = brq->mrq.stop->resp[0];
+-		printk(KERN_ERR "%s: error %d transferring data,"
+-		       " sector %u, nr %u, card status %#x\n",
+-		       req->rq_disk->disk_name, brq->data.error,
+-		       (unsigned)blk_rq_pos(req),
+-		       (unsigned)blk_rq_sectors(req), status);
+-	}
++		mmc_set_data_timeout(&brq.data, card);
+ 
+-	if (brq->stop.error) {
+-		printk(KERN_ERR "%s: error %d sending stop command, "
+-		       "response %#x, card status %#x\n",
+-		       req->rq_disk->disk_name, brq->stop.error,
+-		       brq->stop.resp[0], status);
+-	}
++		brq.data.sg = mq->sg;
++		brq.data.sg_len = mmc_queue_map_sg(mq);
+ 
+-	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
+-		do {
+-			int err;
+-
+-			cmd.opcode = MMC_SEND_STATUS;
+-			cmd.arg = card->rca << 16;
+-			cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+-			err = mmc_wait_for_cmd(card->host, &cmd, 5);
+-			if (err) {
+-				printk(KERN_ERR "%s: error %d requesting status\n",
+-				       req->rq_disk->disk_name, err);
+-				ret = MMC_BLK_CMD_ERR;
+-				goto out;
++		/*
++		 * Adjust the sg list so it is the same size as the
++		 * request.
++		 */
++		if (brq.data.blocks != blk_rq_sectors(req)) {
++			int i, data_size = brq.data.blocks << 9;
++			struct scatterlist *sg;
++
++			for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
++				data_size -= sg->length;
++				if (data_size <= 0) {
++					sg->length += data_size;
++					i++;
++					break;
++				}
+ 			}
+-			/*
+-			 * Some cards mishandle the status bits,
+-			 * so make sure to check both the busy
+-			 * indication and the card state.
+-			 */
+-		} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+-			 (R1_CURRENT_STATE(cmd.resp[0]) == 7));
+-
+-#if 0
+-		if (cmd.resp[0] & ~0x00000900)
+-			printk(KERN_ERR "%s: status = %08x\n",
+-			       req->rq_disk->disk_name, cmd.resp[0]);
+-		if (mmc_decode_status(cmd.resp)) {
+-			ret = MMC_BLK_CMD_ERR;
+-			goto out;
++			brq.data.sg_len = i;
+ 		}
+ 
+-#endif
+-	}
++		mmc_queue_bounce_pre(mq);
+ 
+-	if (brq->cmd.error || brq->stop.error || brq->data.error) {
+-		if (rq_data_dir(req) == READ)
+-			ret = MMC_BLK_DATA_ERR;
+-		else
+-			ret = MMC_BLK_CMD_ERR;
+-	}
+- out:
+-	return ret;
++		mmc_wait_for_req(card->host, &brq.mrq);
+ 
+-}
++		mmc_queue_bounce_post(mq);
+ 
+-static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+-{
+-	struct mmc_blk_data *md = mq->data;
+-	struct mmc_card *card = md->queue.card;
+-	struct mmc_blk_request *brqc = &mq->mqrq_cur->brq;
+-	struct mmc_blk_request *brqp = &mq->mqrq_prev->brq;
+-	struct mmc_queue_req  *mqrqp = mq->mqrq_prev;
+-	struct request *rqp = mqrqp->req;
+-	int ret = 0;
+-	int disable_multi = 0;
+-	enum mmc_blk_status status;
+-
+-	if (!rqc && !rqp)
+-		return 0;
+-
+-	if (rqc) {
+-		/* Claim host for the first request in a serie of requests */
+-		if (!rqp)
+-			mmc_claim_host(card->host);
+-
+-		/* Prepare a new request */
+-		mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
+-		mmc_pre_req(card->host, &brqc->mrq, !rqp);
+-	}
+-	do {
+ 		/*
+-		 * If there is an ongoing request, indicated by rqp, wait for
+-		 * it to finish before starting a new one.
++		 * Check for errors here, but don't jump to cmd_err
++		 * until later as we need to wait for the card to leave
++		 * programming mode even when things go wrong.
+ 		 */
+-		if (rqp)
+-			mmc_wait_for_req_done(&brqp->mrq);
+-		else {
+-			/* start a new asynchronous request */
+-			mmc_start_req(card->host, &brqc->mrq);
+-			goto out;
+-		}
+-		status = mmc_blk_get_status(brqp, rqp, card, md);
+-		if (status != MMC_BLK_SUCCESS) {
+-			mmc_post_req(card->host, &brqp->mrq, -EINVAL);
+-			mmc_queue_bounce_post(mqrqp);
+-			if (rqc)
+-				mmc_post_req(card->host, &brqc->mrq, -EINVAL);
++		if (brq.cmd.error || brq.data.error || brq.stop.error) {
++			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
++				/* Redo read one sector at a time */
++				printk(KERN_WARNING "%s: retrying using single "
++				       "block read\n", req->rq_disk->disk_name);
++				disable_multi = 1;
++				continue;
++			}
++			status = get_card_status(card, req);
+ 		}
+ 
+-		switch (status) {
+-		case MMC_BLK_SUCCESS:
+-			/*
+-			 * A block was successfully transferred.
+-			 */
+-
+-			/*
+-			 * All data is transferred without errors.
+-			 * Defer mmc post processing and _blk_end_request
+-			 * until after the new request is started.
+-			 */
+-			if (blk_rq_bytes(rqp) == brqp->data.bytes_xfered)
+-				break;
+-
+-			mmc_post_req(card->host, &brqp->mrq, 0);
+-			mmc_queue_bounce_post(mqrqp);
+-
+-			spin_lock_irq(&md->lock);
+-			ret = __blk_end_request(rqp, 0,
+-						brqp->data.bytes_xfered);
+-			spin_unlock_irq(&md->lock);
+-
+-			if (rqc)
+-				mmc_post_req(card->host, &brqc->mrq, -EINVAL);
+-			break;
+-		case MMC_BLK_CMD_ERR:
+-			goto cmd_err;
+-			break;
+-		case MMC_BLK_RETRY:
+-			disable_multi = 1;
+-			ret = 1;
+-			break;
+-		case MMC_BLK_DATA_ERR:
+-			/*
+-			 * After an error, we redo I/O one sector at a
+-			 * time, so we only reach here after trying to
+-			 * read a single sector.
+-			 */
+-			spin_lock_irq(&md->lock);
+-			ret = __blk_end_request(rqp, -EIO, brqp->data.blksz);
+-			spin_unlock_irq(&md->lock);
+-			if (rqc && !ret)
+-				mmc_pre_req(card->host, &brqc->mrq, false);
+-			break;
++		if (brq.cmd.error) {
++			printk(KERN_ERR "%s: error %d sending read/write "
++			       "command, response %#x, card status %#x\n",
++			       req->rq_disk->disk_name, brq.cmd.error,
++			       brq.cmd.resp[0], status);
+ 		}
+ 
+-		if (ret) {
+-			/*
+-			 * In case of a none complete request
+-			 * prepare it again and resend.
+-			 */
+-			mmc_blk_rw_rq_prep(mqrqp, card, disable_multi, mq);
+-			mmc_pre_req(card->host, &brqp->mrq, true);
+-			mmc_start_req(card->host, &brqp->mrq);
+-			if (rqc)
+-				mmc_pre_req(card->host, &brqc->mrq, false);
++		if (brq.data.error) {
++			if (brq.data.error == -ETIMEDOUT && brq.mrq.stop)
++				/* 'Stop' response contains card status */
++				status = brq.mrq.stop->resp[0];
++			printk(KERN_ERR "%s: error %d transferring data,"
++			       " sector %u, nr %u, card status %#x\n",
++			       req->rq_disk->disk_name, brq.data.error,
++			       (unsigned)blk_rq_pos(req),
++			       (unsigned)blk_rq_sectors(req), status);
+ 		}
+-	} while (ret);
+ 
+-	/* Previous request is completed, start the new request if any */
+-	if (rqc)
+-		mmc_start_req(card->host, &brqc->mrq);
++		if (brq.stop.error) {
++			printk(KERN_ERR "%s: error %d sending stop command, "
++			       "response %#x, card status %#x\n",
++			       req->rq_disk->disk_name, brq.stop.error,
++			       brq.stop.resp[0], status);
++		}
+ 
+-	/*
+-	 * Post process the previous request while the new request is active.
+-	 * In case of error the reuqest is already ended.
+-	 */
+-	if (status == MMC_BLK_SUCCESS) {
+-		mmc_post_req(card->host, &brqp->mrq, 0);
+-		mmc_queue_bounce_post(mqrqp);
++		if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
++			do {
++				int err;
++
++				cmd.opcode = MMC_SEND_STATUS;
++				cmd.arg = card->rca << 16;
++				cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++				err = mmc_wait_for_cmd(card->host, &cmd, 5);
++				if (err) {
++					printk(KERN_ERR "%s: error %d requesting status\n",
++					       req->rq_disk->disk_name, err);
++					goto cmd_err;
++				}
++				/*
++				 * Some cards mishandle the status bits,
++				 * so make sure to check both the busy
++				 * indication and the card state.
++				 */
++			} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
++				(R1_CURRENT_STATE(cmd.resp[0]) == 7));
+ 
+-		spin_lock_irq(&md->lock);
+-		ret = __blk_end_request(rqp, 0, brqp->data.bytes_xfered);
+-		spin_unlock_irq(&md->lock);
++#if 0
++			if (cmd.resp[0] & ~0x00000900)
++				printk(KERN_ERR "%s: status = %08x\n",
++				       req->rq_disk->disk_name, cmd.resp[0]);
++			if (mmc_decode_status(cmd.resp))
++				goto cmd_err;
++#endif
++		}
+ 
+-		if (ret) {
+-			/* If this happen it is a bug */
+-			printk(KERN_ERR "[%s] BUG: rq_bytes %d xfered %d\n",
+-			       __func__, blk_rq_bytes(rqp),
+-			       brqp->data.bytes_xfered);
++		if (brq.cmd.error || brq.stop.error || brq.data.error) {
++			if (rq_data_dir(req) == READ) {
++				/*
++				 * After an error, we redo I/O one sector at a
++				 * time, so we only reach here after trying to
++				 * read a single sector.
++				 */
++				spin_lock_irq(&md->lock);
++				ret = __blk_end_request(req, -EIO, brq.data.blksz);
++				spin_unlock_irq(&md->lock);
++				continue;
++			}
+ 			goto cmd_err;
+ 		}
+-	}
+ 
+-	/* 1 indicates one request has been completed */
+-	ret = 1;
+- out:
+-	/*
+-	 * TODO: Find out if it is OK to only release host after the
+-	 *       last request. For the last request the current request
+-	 *        is NULL, which means no requests are pending.
+-	 */
+-	/* Release host for the last request in a serie of requests */
+-	if (!rqc)
+-		mmc_release_host(card->host);
++		/*
++		 * A block was successfully transferred.
++		 */
++		spin_lock_irq(&md->lock);
++		ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
++		spin_unlock_irq(&md->lock);
++	} while (ret);
+ 
+-	/* Current request becomes previous request and vice versa. */
+-	mqrqp->brq.mrq.data = NULL;
+-	mqrqp->req = NULL;
+-	mq->mqrq_prev = mq->mqrq_cur;
+-	mq->mqrq_cur = mqrqp;
++	mmc_release_host(card->host);
+ 
+-	return ret;
++	return 1;
+ 
+  cmd_err:
+-
+  	/*
+  	 * If this is an SD card and we're writing, we can first
+  	 * mark the known good sectors as ok.
+@@ -680,12 +539,12 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+ 		blocks = mmc_sd_num_wr_blocks(card);
+ 		if (blocks != (u32)-1) {
+ 			spin_lock_irq(&md->lock);
+-			ret = __blk_end_request(rqp, 0, blocks << 9);
++			ret = __blk_end_request(req, 0, blocks << 9);
+ 			spin_unlock_irq(&md->lock);
+ 		}
+ 	} else {
+ 		spin_lock_irq(&md->lock);
+-		ret = __blk_end_request(rqp, 0, brqp->data.bytes_xfered);
++		ret = __blk_end_request(req, 0, brq.data.bytes_xfered);
+ 		spin_unlock_irq(&md->lock);
+ 	}
+ 
+@@ -693,27 +552,15 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+ 
+ 	spin_lock_irq(&md->lock);
+ 	while (ret)
+-		ret = __blk_end_request(rqp, -EIO, blk_rq_cur_bytes(rqp));
++		ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
+ 	spin_unlock_irq(&md->lock);
+ 
+-	if (rqc) {
+-		mmc_claim_host(card->host);
+-		mmc_pre_req(card->host, &brqc->mrq, false);
+-		mmc_start_req(card->host, &brqc->mrq);
+-	}
+-
+-	/* Current request becomes previous request and vice versa. */
+-	mqrqp->brq.mrq.data = NULL;
+-	mqrqp->req = NULL;
+-	mq->mqrq_prev = mq->mqrq_cur;
+-	mq->mqrq_cur = mqrqp;
+-
+ 	return 0;
+ }
+ 
+ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+ {
+-	if (req && req->cmd_flags & REQ_DISCARD) {
++	if (req->cmd_flags & REQ_DISCARD) {
+ 		if (req->cmd_flags & REQ_SECURE)
+ 			return mmc_blk_issue_secdiscard_rq(mq, req);
+ 		else
+diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
+index 8f7ffad..abc1a63 100644
+--- a/drivers/mmc/card/mmc_test.c
++++ b/drivers/mmc/card/mmc_test.c
+@@ -22,7 +22,6 @@
+ #include <linux/debugfs.h>
+ #include <linux/uaccess.h>
+ #include <linux/seq_file.h>
+-#include <linux/random.h>
+ 
+ #define RESULT_OK		0
+ #define RESULT_FAIL		1
+@@ -52,12 +51,10 @@ struct mmc_test_pages {
+  * struct mmc_test_mem - allocated memory.
+  * @arr: array of allocations
+  * @cnt: number of allocations
+- * @size_min_cmn: lowest common size in array of allocations
+  */
+ struct mmc_test_mem {
+ 	struct mmc_test_pages *arr;
+ 	unsigned int cnt;
+-	unsigned int size_min_cmn;
+ };
+ 
+ /**
+@@ -151,21 +148,6 @@ struct mmc_test_card {
+ 	struct mmc_test_general_result	*gr;
+ };
+ 
+-enum mmc_test_prep_media {
+-	MMC_TEST_PREP_NONE = 0,
+-	MMC_TEST_PREP_WRITE_FULL = 1 << 0,
+-	MMC_TEST_PREP_ERASE = 1 << 1,
+-};
+-
+-struct mmc_test_multiple_rw {
+-	unsigned int *bs;
+-	unsigned int len;
+-	unsigned int size;
+-	bool do_write;
+-	bool do_nonblock_req;
+-	enum mmc_test_prep_media prepare;
+-};
+-
+ /*******************************************************************/
+ /*  General helper functions                                       */
+ /*******************************************************************/
+@@ -325,7 +307,6 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 	unsigned long max_seg_page_cnt = DIV_ROUND_UP(max_seg_sz, PAGE_SIZE);
+ 	unsigned long page_cnt = 0;
+ 	unsigned long limit = nr_free_buffer_pages() >> 4;
+-	unsigned int min_cmn = 0;
+ 	struct mmc_test_mem *mem;
+ 
+ 	if (max_page_cnt > limit)
+@@ -369,12 +350,6 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 		mem->arr[mem->cnt].page = page;
+ 		mem->arr[mem->cnt].order = order;
+ 		mem->cnt += 1;
+-		if (!min_cmn)
+-			min_cmn = PAGE_SIZE << order;
+-		else
+-			min_cmn = min(min_cmn,
+-				      (unsigned int) (PAGE_SIZE << order));
+-
+ 		if (max_page_cnt <= (1UL << order))
+ 			break;
+ 		max_page_cnt -= 1UL << order;
+@@ -385,7 +360,6 @@ static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz,
+ 			break;
+ 		}
+ 	}
+-	mem->size_min_cmn = min_cmn;
+ 
+ 	return mem;
+ 
+@@ -412,6 +386,7 @@ static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long sz,
+ 	do {
+ 		for (i = 0; i < mem->cnt; i++) {
+ 			unsigned long len = PAGE_SIZE << mem->arr[i].order;
++
+ 			if (len > sz)
+ 				len = sz;
+ 			if (len > max_seg_sz)
+@@ -750,94 +725,6 @@ static int mmc_test_check_broken_result(struct mmc_test_card *test,
+ }
+ 
+ /*
+- * Tests nonblock transfer with certain parameters
+- */
+-static void mmc_test_nonblock_reset(struct mmc_request *mrq,
+-				    struct mmc_command *cmd,
+-				    struct mmc_command *stop,
+-				    struct mmc_data *data)
+-{
+-	memset(mrq, 0, sizeof(struct mmc_request));
+-	memset(cmd, 0, sizeof(struct mmc_command));
+-	memset(data, 0, sizeof(struct mmc_data));
+-	memset(stop, 0, sizeof(struct mmc_command));
+-
+-	mrq->cmd = cmd;
+-	mrq->data = data;
+-	mrq->stop = stop;
+-}
+-static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
+-				      struct scatterlist *sg, unsigned sg_len,
+-				      unsigned dev_addr, unsigned blocks,
+-				      unsigned blksz, int write, int count)
+-{
+-	struct mmc_request mrq1;
+-	struct mmc_command cmd1;
+-	struct mmc_command stop1;
+-	struct mmc_data data1;
+-
+-	struct mmc_request mrq2;
+-	struct mmc_command cmd2;
+-	struct mmc_command stop2;
+-	struct mmc_data data2;
+-
+-	struct mmc_request *cur_mrq;
+-	struct mmc_request *prev_mrq;
+-	int i;
+-	int ret = 0;
+-
+-	if (!test->card->host->ops->pre_req ||
+-		!test->card->host->ops->post_req)
+-		return -RESULT_UNSUP_HOST;
+-
+-	mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
+-	mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
+-
+-	cur_mrq = &mrq1;
+-	prev_mrq = NULL;
+-
+-	for (i = 0; i < count; i++) {
+-		mmc_test_prepare_mrq(test, cur_mrq, sg, sg_len, dev_addr,
+-				blocks, blksz, write);
+-		mmc_pre_req(test->card->host, cur_mrq, !prev_mrq);
+-
+-		if (prev_mrq) {
+-			mmc_wait_for_req_done(prev_mrq);
+-			mmc_test_wait_busy(test);
+-			ret = mmc_test_check_result(test, prev_mrq);
+-			if (ret)
+-				goto err;
+-		}
+-
+-		mmc_start_req(test->card->host, cur_mrq);
+-
+-		if (prev_mrq)
+-			mmc_post_req(test->card->host, prev_mrq, 0);
+-
+-		prev_mrq = cur_mrq;
+-		if (cur_mrq == &mrq1) {
+-			mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
+-			cur_mrq = &mrq2;
+-		} else {
+-			mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
+-			cur_mrq = &mrq1;
+-		}
+-		dev_addr += blocks;
+-	}
+-
+-	mmc_wait_for_req_done(prev_mrq);
+-	mmc_test_wait_busy(test);
+-	ret = mmc_test_check_result(test, prev_mrq);
+-	if (ret)
+-		goto err;
+-	mmc_post_req(test->card->host, prev_mrq, 0);
+-
+-	return ret;
+-err:
+-	return ret;
+-}
+-
+-/*
+  * Tests a basic transfer with certain parameters
+  */
+ static int mmc_test_simple_transfer(struct mmc_test_card *test,
+@@ -1464,17 +1351,14 @@ static int mmc_test_area_transfer(struct mmc_test_card *test,
+ }
+ 
+ /*
+- * Map and transfer bytes for multiple transfers.
++ * Map and transfer bytes.
+  */
+-static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
+-				unsigned int dev_addr, int write,
+-				int max_scatter, int timed, int count,
+-				bool nonblock)
++static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
++			    unsigned int dev_addr, int write, int max_scatter,
++			    int timed)
+ {
+ 	struct timespec ts1, ts2;
+-	int ret = 0;
+-	int i;
+-	struct mmc_test_area *t = &test->area;
++	int ret;
+ 
+ 	/*
+ 	 * In the case of a maximally scattered transfer, the maximum transfer
+@@ -1498,15 +1382,8 @@ static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
+ 
+ 	if (timed)
+ 		getnstimeofday(&ts1);
+-	if (nonblock)
+-		ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_len,
+-				 dev_addr, t->blocks, 512, write, count);
+-	else
+-		for (i = 0; i < count && ret == 0; i++) {
+-			ret = mmc_test_area_transfer(test, dev_addr, write);
+-			dev_addr += sz >> 9;
+-		}
+ 
++	ret = mmc_test_area_transfer(test, dev_addr, write);
+ 	if (ret)
+ 		return ret;
+ 
+@@ -1514,19 +1391,11 @@ static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
+ 		getnstimeofday(&ts2);
+ 
+ 	if (timed)
+-		mmc_test_print_avg_rate(test, sz, count, &ts1, &ts2);
++		mmc_test_print_rate(test, sz, &ts1, &ts2);
+ 
+ 	return 0;
+ }
+ 
+-static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
+-			    unsigned int dev_addr, int write, int max_scatter,
+-			    int timed)
+-{
+-	return mmc_test_area_io_seq(test, sz, dev_addr, write, max_scatter,
+-				    timed, 1, false);
+-}
+-
+ /*
+  * Write the test area entirely.
+  */
+@@ -2087,144 +1956,6 @@ static int mmc_test_large_seq_write_perf(struct mmc_test_card *test)
+ 	return mmc_test_large_seq_perf(test, 1);
+ }
+ 
+-static int mmc_test_rw_multiple(struct mmc_test_card *test,
+-				struct mmc_test_multiple_rw *tdata,
+-				unsigned int reqsize, unsigned int size)
+-{
+-	unsigned int dev_addr;
+-	struct mmc_test_area *t = &test->area;
+-	int ret = 0;
+-	int max_reqsize = max(t->mem->size_min_cmn *
+-			      min(t->max_segs, t->mem->cnt), t->max_tfr);
+-
+-	/* Set up test area */
+-	if (size > mmc_test_capacity(test->card) / 2 * 512)
+-		size = mmc_test_capacity(test->card) / 2 * 512;
+-	if (reqsize > max_reqsize)
+-		reqsize = max_reqsize;
+-	dev_addr = mmc_test_capacity(test->card) / 4;
+-	if ((dev_addr & 0xffff0000))
+-		dev_addr &= 0xffff0000; /* Round to 64MiB boundary */
+-	else
+-		dev_addr &= 0xfffff800; /* Round to 1MiB boundary */
+-	if (!dev_addr)
+-		goto err;
+-
+-	/* prepare test area */
+-	if (mmc_can_erase(test->card) &&
+-	    tdata->prepare & MMC_TEST_PREP_ERASE) {
+-		ret = mmc_erase(test->card, dev_addr,
+-				size / 512, MMC_SECURE_ERASE_ARG);
+-		if (ret)
+-			ret = mmc_erase(test->card, dev_addr,
+-					size / 512, MMC_ERASE_ARG);
+-		if (ret)
+-			goto err;
+-	}
+-
+-	/* Run test */
+-	ret = mmc_test_area_io_seq(test, reqsize, dev_addr,
+-				   tdata->do_write, 0, 1, size / reqsize,
+-				   tdata->do_nonblock_req);
+-	if (ret)
+-		goto err;
+-
+-	return ret;
+- err:
+-	printk(KERN_INFO "[%s] error\n", __func__);
+-	return ret;
+-}
+-
+-static int mmc_test_rw_multiple_size(struct mmc_test_card *test,
+-				     struct mmc_test_multiple_rw *rw)
+-{
+-	int ret = 0;
+-	int i;
+-
+-	for (i = 0 ; i < rw->len && ret == 0; i++) {
+-		ret = mmc_test_rw_multiple(test, rw, rw->bs[i], rw->size);
+-		if (ret)
+-			break;
+-	}
+-	return ret;
+-}
+-
+-/*
+- * Multiple blocking write 4k to 4 MB chunks
+- */
+-static int mmc_test_profile_mult_write_blocking_perf(struct mmc_test_card *test)
+-{
+-	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
+-			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
+-	struct mmc_test_multiple_rw test_data = {
+-		.bs = bs,
+-		.size = 128*1024*1024,
+-		.len = ARRAY_SIZE(bs),
+-		.do_write = true,
+-		.do_nonblock_req = false,
+-		.prepare = MMC_TEST_PREP_ERASE,
+-	};
+-
+-	return mmc_test_rw_multiple_size(test, &test_data);
+-};
+-
+-/*
+- * Multiple none blocking write 4k to 4 MB chunks
+- */
+-static int mmc_test_profile_mult_write_nonblock_perf(struct mmc_test_card *test)
+-{
+-	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
+-			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
+-	struct mmc_test_multiple_rw test_data = {
+-		.bs = bs,
+-		.size = 128*1024*1024,
+-		.len = ARRAY_SIZE(bs),
+-		.do_write = true,
+-		.do_nonblock_req = true,
+-		.prepare = MMC_TEST_PREP_ERASE,
+-	};
+-
+-	return mmc_test_rw_multiple_size(test, &test_data);
+-}
+-
+-/*
+- * Multiple blocking read 4k to 4 MB chunks
+- */
+-static int mmc_test_profile_mult_read_blocking_perf(struct mmc_test_card *test)
+-{
+-	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
+-			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
+-	struct mmc_test_multiple_rw test_data = {
+-		.bs = bs,
+-		.size = 128*1024*1024,
+-		.len = ARRAY_SIZE(bs),
+-		.do_write = false,
+-		.do_nonblock_req = false,
+-		.prepare = MMC_TEST_PREP_NONE,
+-	};
+-
+-	return mmc_test_rw_multiple_size(test, &test_data);
+-}
+-
+-/*
+- * Multiple none blocking read 4k to 4 MB chunks
+- */
+-static int mmc_test_profile_mult_read_nonblock_perf(struct mmc_test_card *test)
+-{
+-	unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
+-			     1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
+-	struct mmc_test_multiple_rw test_data = {
+-		.bs = bs,
+-		.size = 128*1024*1024,
+-		.len = ARRAY_SIZE(bs),
+-		.do_write = false,
+-		.do_nonblock_req = true,
+-		.prepare = MMC_TEST_PREP_NONE,
+-	};
+-
+-	return mmc_test_rw_multiple_size(test, &test_data);
+-}
+-
+ static const struct mmc_test_case mmc_test_cases[] = {
+ 	{
+ 		.name = "Basic write (no data verification)",
+@@ -2492,33 +2223,6 @@ static const struct mmc_test_case mmc_test_cases[] = {
+ 		.cleanup = mmc_test_area_cleanup,
+ 	},
+ 
+-	{
+-		.name = "Write performance with blocking req 4k to 4MB",
+-		.prepare = mmc_test_area_prepare,
+-		.run = mmc_test_profile_mult_write_blocking_perf,
+-		.cleanup = mmc_test_area_cleanup,
+-	},
+-
+-	{
+-		.name = "Write performance with none blocking req 4k to 4MB",
+-		.prepare = mmc_test_area_prepare,
+-		.run = mmc_test_profile_mult_write_nonblock_perf,
+-		.cleanup = mmc_test_area_cleanup,
+-	},
+-
+-	{
+-		.name = "Read performance with blocking req 4k to 4MB",
+-		.prepare = mmc_test_area_prepare,
+-		.run = mmc_test_profile_mult_read_blocking_perf,
+-		.cleanup = mmc_test_area_cleanup,
+-	},
+-
+-	{
+-		.name = "Read performance with none blocking req 4k to 4MB",
+-		.prepare = mmc_test_area_prepare,
+-		.run = mmc_test_profile_mult_read_nonblock_perf,
+-		.cleanup = mmc_test_area_cleanup,
+-	},
+ };
+ 
+ static DEFINE_MUTEX(mmc_test_lock);
+@@ -2743,32 +2447,6 @@ static const struct file_operations mmc_test_fops_test = {
+ 	.release	= single_release,
+ };
+ 
+-static int mtf_testlist_show(struct seq_file *sf, void *data)
+-{
+-	int i;
+-
+-	mutex_lock(&mmc_test_lock);
+-
+-	for (i = 0; i < ARRAY_SIZE(mmc_test_cases); i++)
+-		seq_printf(sf, "%d:\t%s\n", i+1, mmc_test_cases[i].name);
+-
+-	mutex_unlock(&mmc_test_lock);
+-
+-	return 0;
+-}
+-
+-static int mtf_testlist_open(struct inode *inode, struct file *file)
+-{
+-	return single_open(file, mtf_testlist_show, inode->i_private);
+-}
+-
+-static const struct file_operations mmc_test_fops_testlist = {
+-	.open		= mtf_testlist_open,
+-	.read		= seq_read,
+-	.llseek		= seq_lseek,
+-	.release	= single_release,
+-};
+-
+ static void mmc_test_free_file_test(struct mmc_card *card)
+ {
+ 	struct mmc_test_dbgfs_file *df, *dfs;
+@@ -2798,10 +2476,6 @@ static int mmc_test_register_file_test(struct mmc_card *card)
+ 		file = debugfs_create_file("test", S_IWUSR | S_IRUGO,
+ 			card->debugfs_root, card, &mmc_test_fops_test);
+ 
+-	if (card->debugfs_root)
+-		file = debugfs_create_file("testlist", S_IRUGO,
+-			card->debugfs_root, card, &mmc_test_fops_testlist);
+-
+ 	if (IS_ERR_OR_NULL(file)) {
+ 		dev_err(&card->dev,
+ 			"Can't create file. Perhaps debugfs is disabled.\n");
+diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
+index 2b14d1c..2ae7275 100644
+--- a/drivers/mmc/card/queue.c
++++ b/drivers/mmc/card/queue.c
+@@ -56,10 +56,9 @@ static int mmc_queue_thread(void *d)
+ 		spin_lock_irq(q->queue_lock);
+ 		set_current_state(TASK_INTERRUPTIBLE);
+ 		req = blk_fetch_request(q);
+-		mq->mqrq_cur->req = req;
++		mq->req = req;
+ 		spin_unlock_irq(q->queue_lock);
+ 
+-		mq->issue_fn(mq, req);
+ 		if (!req) {
+ 			if (kthread_should_stop()) {
+ 				set_current_state(TASK_RUNNING);
+@@ -72,6 +71,7 @@ static int mmc_queue_thread(void *d)
+ 		}
+ 		set_current_state(TASK_RUNNING);
+ 
++		mq->issue_fn(mq, req);
+ 	} while (1);
+ 	up(&mq->thread_sem);
+ 
+@@ -97,25 +97,10 @@ static void mmc_request(struct request_queue *q)
+ 		return;
+ 	}
+ 
+-	if (!mq->mqrq_cur->req)
++	if (!mq->req)
+ 		wake_up_process(mq->thread);
+ }
+ 
+-struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
+-{
+-	struct scatterlist *sg;
+-
+-	sg = kmalloc(sizeof(struct scatterlist)*sg_len, GFP_KERNEL);
+-	if (!sg)
+-		*err = -ENOMEM;
+-	else {
+-		*err = 0;
+-		sg_init_table(sg, sg_len);
+-	}
+-
+-	return sg;
+-}
+-
+ /**
+  * mmc_init_queue - initialise a queue structure.
+  * @mq: mmc queue
+@@ -129,8 +114,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 	struct mmc_host *host = card->host;
+ 	u64 limit = BLK_BOUNCE_HIGH;
+ 	int ret;
+-	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+-	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+ 
+ 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
+ 		limit = *mmc_dev(host)->dma_mask;
+@@ -140,11 +123,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 	if (!mq->queue)
+ 		return -ENOMEM;
+ 
+-	memset(&mq->mqrq_cur, 0, sizeof(mq->mqrq_cur));
+-	memset(&mq->mqrq_prev, 0, sizeof(mq->mqrq_prev));
+-	mq->mqrq_cur = mqrq_cur;
+-	mq->mqrq_prev = mqrq_prev;
+ 	mq->queue->queuedata = mq;
++	mq->req = NULL;
+ 
+ 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
+ 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
+@@ -178,64 +158,53 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 			bouncesz = host->max_blk_count * 512;
+ 
+ 		if (bouncesz > 512) {
+-			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+-			if (!mqrq_cur->bounce_buf) {
+-				printk(KERN_WARNING "%s: unable to "
+-					"allocate bounce cur buffer\n",
+-					mmc_card_name(card));
+-			}
+-			mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+-			if (!mqrq_prev->bounce_buf) {
++			mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
++			if (!mq->bounce_buf) {
+ 				printk(KERN_WARNING "%s: unable to "
+-					"allocate bounce prev buffer\n",
++					"allocate bounce buffer\n",
+ 					mmc_card_name(card));
+-				kfree(mqrq_cur->bounce_buf);
+-				mqrq_cur->bounce_buf = NULL;
+ 			}
+ 		}
+ 
+-		if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) {
++		if (mq->bounce_buf) {
+ 			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
+ 			blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
+ 			blk_queue_max_segments(mq->queue, bouncesz / 512);
+ 			blk_queue_max_segment_size(mq->queue, bouncesz);
+ 
+-			mqrq_cur->sg = mmc_alloc_sg(1, &ret);
+-			if (ret)
+-				goto cleanup_queue;
+-
+-			mqrq_cur->bounce_sg =
+-				mmc_alloc_sg(bouncesz / 512, &ret);
+-			if (ret)
+-				goto cleanup_queue;
+-
+-			mqrq_prev->sg = mmc_alloc_sg(1, &ret);
+-			if (ret)
++			mq->sg = kmalloc(sizeof(struct scatterlist),
++				GFP_KERNEL);
++			if (!mq->sg) {
++				ret = -ENOMEM;
+ 				goto cleanup_queue;
++			}
++			sg_init_table(mq->sg, 1);
+ 
+-			mqrq_prev->bounce_sg =
+-				mmc_alloc_sg(bouncesz / 512, &ret);
+-			if (ret)
++			mq->bounce_sg = kmalloc(sizeof(struct scatterlist) *
++				bouncesz / 512, GFP_KERNEL);
++			if (!mq->bounce_sg) {
++				ret = -ENOMEM;
+ 				goto cleanup_queue;
++			}
++			sg_init_table(mq->bounce_sg, bouncesz / 512);
+ 		}
+ 	}
+ #endif
+ 
+-	if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) {
++	if (!mq->bounce_buf) {
+ 		blk_queue_bounce_limit(mq->queue, limit);
+ 		blk_queue_max_hw_sectors(mq->queue,
+ 			min(host->max_blk_count, host->max_req_size / 512));
+ 		blk_queue_max_segments(mq->queue, host->max_segs);
+ 		blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+ 
+-		mqrq_cur->sg = mmc_alloc_sg(host->max_segs, &ret);
+-		if (ret)
+-			goto cleanup_queue;
+-
+-
+-		mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret);
+-		if (ret)
++		mq->sg = kmalloc(sizeof(struct scatterlist) *
++			host->max_segs, GFP_KERNEL);
++		if (!mq->sg) {
++			ret = -ENOMEM;
+ 			goto cleanup_queue;
++		}
++		sg_init_table(mq->sg, host->max_segs);
+ 	}
+ 
+ 	sema_init(&mq->thread_sem, 1);
+@@ -250,22 +219,16 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
+ 
+ 	return 0;
+  free_bounce_sg:
+-	kfree(mqrq_cur->bounce_sg);
+-	mqrq_cur->bounce_sg = NULL;
+-	kfree(mqrq_prev->bounce_sg);
+-	mqrq_prev->bounce_sg = NULL;
+-
++ 	if (mq->bounce_sg)
++ 		kfree(mq->bounce_sg);
++ 	mq->bounce_sg = NULL;
+  cleanup_queue:
+-	kfree(mqrq_cur->sg);
+-	mqrq_cur->sg = NULL;
+-	kfree(mqrq_cur->bounce_buf);
+-	mqrq_cur->bounce_buf = NULL;
+-
+-	kfree(mqrq_prev->sg);
+-	mqrq_prev->sg = NULL;
+-	kfree(mqrq_prev->bounce_buf);
+-	mqrq_prev->bounce_buf = NULL;
+-
++ 	if (mq->sg)
++		kfree(mq->sg);
++	mq->sg = NULL;
++	if (mq->bounce_buf)
++		kfree(mq->bounce_buf);
++	mq->bounce_buf = NULL;
+ 	blk_cleanup_queue(mq->queue);
+ 	return ret;
+ }
+@@ -274,8 +237,6 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
+ {
+ 	struct request_queue *q = mq->queue;
+ 	unsigned long flags;
+-	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+-	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+ 
+ 	/* Make sure the queue isn't suspended, as that will deadlock */
+ 	mmc_queue_resume(mq);
+@@ -289,23 +250,16 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
+ 	blk_start_queue(q);
+ 	spin_unlock_irqrestore(q->queue_lock, flags);
+ 
+-	kfree(mqrq_cur->bounce_sg);
+-	mqrq_cur->bounce_sg = NULL;
+-
+-	kfree(mqrq_cur->sg);
+-	mqrq_cur->sg = NULL;
++ 	if (mq->bounce_sg)
++ 		kfree(mq->bounce_sg);
++ 	mq->bounce_sg = NULL;
+ 
+-	kfree(mqrq_cur->bounce_buf);
+-	mqrq_cur->bounce_buf = NULL;
++	kfree(mq->sg);
++	mq->sg = NULL;
+ 
+-	kfree(mqrq_prev->bounce_sg);
+-	mqrq_prev->bounce_sg = NULL;
+-
+-	kfree(mqrq_prev->sg);
+-	mqrq_prev->sg = NULL;
+-
+-	kfree(mqrq_prev->bounce_buf);
+-	mqrq_prev->bounce_buf = NULL;
++	if (mq->bounce_buf)
++		kfree(mq->bounce_buf);
++	mq->bounce_buf = NULL;
+ 
+ 	mq->card = NULL;
+ }
+@@ -358,27 +312,27 @@ void mmc_queue_resume(struct mmc_queue *mq)
+ /*
+  * Prepare the sg list(s) to be handed of to the host driver
+  */
+-unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
++unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
+ {
+ 	unsigned int sg_len;
+ 	size_t buflen;
+ 	struct scatterlist *sg;
+ 	int i;
+ 
+-	if (!mqrq->bounce_buf)
+-		return blk_rq_map_sg(mq->queue, mqrq->req, mqrq->sg);
++	if (!mq->bounce_buf)
++		return blk_rq_map_sg(mq->queue, mq->req, mq->sg);
+ 
+-	BUG_ON(!mqrq->bounce_sg);
++	BUG_ON(!mq->bounce_sg);
+ 
+-	sg_len = blk_rq_map_sg(mq->queue, mqrq->req, mqrq->bounce_sg);
++	sg_len = blk_rq_map_sg(mq->queue, mq->req, mq->bounce_sg);
+ 
+-	mqrq->bounce_sg_len = sg_len;
++	mq->bounce_sg_len = sg_len;
+ 
+ 	buflen = 0;
+-	for_each_sg(mqrq->bounce_sg, sg, sg_len, i)
++	for_each_sg(mq->bounce_sg, sg, sg_len, i)
+ 		buflen += sg->length;
+ 
+-	sg_init_one(mqrq->sg, mqrq->bounce_buf, buflen);
++	sg_init_one(mq->sg, mq->bounce_buf, buflen);
+ 
+ 	return 1;
+ }
+@@ -387,19 +341,19 @@ unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
+  * If writing, bounce the data to the buffer before the request
+  * is sent to the host driver
+  */
+-void mmc_queue_bounce_pre(struct mmc_queue_req *mqrq)
++void mmc_queue_bounce_pre(struct mmc_queue *mq)
+ {
+ 	unsigned long flags;
+ 
+-	if (!mqrq->bounce_buf)
++	if (!mq->bounce_buf)
+ 		return;
+ 
+-	if (rq_data_dir(mqrq->req) != WRITE)
++	if (rq_data_dir(mq->req) != WRITE)
+ 		return;
+ 
+ 	local_irq_save(flags);
+-	sg_copy_to_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
+-		mqrq->bounce_buf, mqrq->sg[0].length);
++	sg_copy_to_buffer(mq->bounce_sg, mq->bounce_sg_len,
++		mq->bounce_buf, mq->sg[0].length);
+ 	local_irq_restore(flags);
+ }
+ 
+@@ -407,18 +361,19 @@ void mmc_queue_bounce_pre(struct mmc_queue_req *mqrq)
+  * If reading, bounce the data from the buffer after the request
+  * has been handled by the host driver
+  */
+-void mmc_queue_bounce_post(struct mmc_queue_req *mqrq)
++void mmc_queue_bounce_post(struct mmc_queue *mq)
+ {
+ 	unsigned long flags;
+ 
+-	if (!mqrq->bounce_buf)
++	if (!mq->bounce_buf)
+ 		return;
+ 
+-	if (rq_data_dir(mqrq->req) != READ)
++	if (rq_data_dir(mq->req) != READ)
+ 		return;
+ 
+ 	local_irq_save(flags);
+-	sg_copy_from_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
+-		mqrq->bounce_buf, mqrq->sg[0].length);
++	sg_copy_from_buffer(mq->bounce_sg, mq->bounce_sg_len,
++		mq->bounce_buf, mq->sg[0].length);
+ 	local_irq_restore(flags);
+ }
++
+diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
+index 0e65807..64e66e0 100644
+--- a/drivers/mmc/card/queue.h
++++ b/drivers/mmc/card/queue.h
+@@ -4,33 +4,19 @@
+ struct request;
+ struct task_struct;
+ 
+-struct mmc_blk_request {
+-	struct mmc_request	mrq;
+-	struct mmc_command	cmd;
+-	struct mmc_command	stop;
+-	struct mmc_data		data;
+-};
+-
+-struct mmc_queue_req {
+-	struct request		*req;
+-	struct mmc_blk_request	brq;
+-	struct scatterlist	*sg;
+-	char			*bounce_buf;
+-	struct scatterlist	*bounce_sg;
+-	unsigned int		bounce_sg_len;
+-};
+-
+ struct mmc_queue {
+ 	struct mmc_card		*card;
+ 	struct task_struct	*thread;
+ 	struct semaphore	thread_sem;
+ 	unsigned int		flags;
++	struct request		*req;
+ 	int			(*issue_fn)(struct mmc_queue *, struct request *);
+ 	void			*data;
+ 	struct request_queue	*queue;
+-	struct mmc_queue_req	mqrq[2];
+-	struct mmc_queue_req	*mqrq_cur;
+-	struct mmc_queue_req	*mqrq_prev;
++	struct scatterlist	*sg;
++	char			*bounce_buf;
++	struct scatterlist	*bounce_sg;
++	unsigned int		bounce_sg_len;
+ };
+ 
+ extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+@@ -38,9 +24,8 @@ extern void mmc_cleanup_queue(struct mmc_queue *);
+ extern void mmc_queue_suspend(struct mmc_queue *);
+ extern void mmc_queue_resume(struct mmc_queue *);
+ 
+-extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
+-				     struct mmc_queue_req *);
+-extern void mmc_queue_bounce_pre(struct mmc_queue_req *);
+-extern void mmc_queue_bounce_post(struct mmc_queue_req *);
++extern unsigned int mmc_queue_map_sg(struct mmc_queue *);
++extern void mmc_queue_bounce_pre(struct mmc_queue *);
++extern void mmc_queue_bounce_post(struct mmc_queue *);
+ 
+ #endif
+diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
+index 85296df..1f453ac 100644
+--- a/drivers/mmc/core/core.c
++++ b/drivers/mmc/core/core.c
+@@ -23,8 +23,6 @@
+ #include <linux/log2.h>
+ #include <linux/regulator/consumer.h>
+ #include <linux/pm_runtime.h>
+-#include <linux/fault-inject.h>
+-#include <linux/random.h>
+ 
+ #include <linux/mmc/card.h>
+ #include <linux/mmc/host.h>
+@@ -84,56 +82,6 @@ static void mmc_flush_scheduled_work(void)
+ 	flush_workqueue(workqueue);
+ }
+ 
+-#ifdef CONFIG_FAIL_MMC_REQUEST
+-
+-static DECLARE_FAULT_ATTR(fail_mmc_request);
+-
+-static int __init setup_fail_mmc_request(char *str)
+-{
+-	return setup_fault_attr(&fail_mmc_request, str);
+-}
+-__setup("fail_mmc_request=", setup_fail_mmc_request);
+-
+-static void mmc_should_fail_request(struct mmc_host *host,
+-				    struct mmc_request *mrq)
+-{
+-	struct mmc_command *cmd = mrq->cmd;
+-	struct mmc_data *data = mrq->data;
+-	static const int data_errors[] = {
+-		-ETIMEDOUT,
+-		-EILSEQ,
+-		-EIO,
+-	};
+-
+-	if (!data)
+-		return;
+-
+-	if (cmd->error || data->error || !host->make_it_fail ||
+-	    !should_fail(&fail_mmc_request, data->blksz * data->blocks))
+-		return;
+-
+-	data->error = data_errors[random32() % ARRAY_SIZE(data_errors)];
+-	data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9;
+-}
+-
+-static int __init fail_mmc_request_debugfs(void)
+-{
+-	return init_fault_attr_dentries(&fail_mmc_request,
+-					"fail_mmc_request");
+-}
+-
+-late_initcall(fail_mmc_request_debugfs);
+-
+-#else /* CONFIG_FAIL_MMC_REQUEST */
+-
+-static inline void mmc_should_fail_request(struct mmc_host *host,
+-					   struct mmc_data *data)
+-{
+-}
+-
+-#endif /* CONFIG_FAIL_MMC_REQUEST */
+-
+-
+ /**
+  *	mmc_request_done - finish processing an MMC request
+  *	@host: MMC host which completed request
+@@ -160,8 +108,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
+ 		cmd->error = 0;
+ 		host->ops->request(host, mrq);
+ 	} else {
+-		mmc_should_fail_request(host, mrq);
+-
+ 		led_trigger_event(host->led, LED_OFF);
+ 
+ 		pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
+@@ -252,73 +198,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
+ 
+ static void mmc_wait_done(struct mmc_request *mrq)
+ {
+-	complete(&mrq->completion);
+-}
+-
+-/**
+- *	mmc_pre_req - Prepare for a new request
+- *	@host: MMC host to prepare command
+- *	@mrq: MMC request to prepare for
+- *	@is_first_req: true if there is no previous started request
+- *                     that may run in parellel to this call, otherwise false
+- *
+- *	mmc_pre_req() is called in prior to mmc_start_req() to let
+- *	host prepare for the new request. Preparation of a request may be
+- *	performed while another request is running on the host.
+- */
+-void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
+-		 bool is_first_req)
+-{
+-	if (host->ops->pre_req)
+-		host->ops->pre_req(host, mrq, is_first_req);
++	complete(mrq->done_data);
+ }
+-EXPORT_SYMBOL(mmc_pre_req);
+-
+-/**
+- *	mmc_post_req - Post process a completed request
+- *	@host: MMC host to post process command
+- *	@mrq: MMC request to post process for
+- *	@err: Error, if none zero, clean up any resources made in pre_req
+- *
+- *	Let the host post process a completed request. Post processing of
+- *	a request may be performed while another reuqest is running.
+- */
+-void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, int err)
+-{
+-	if (host->ops->post_req)
+-		host->ops->post_req(host, mrq, err);
+-}
+-EXPORT_SYMBOL(mmc_post_req);
+-
+-/**
+- *	mmc_start_req - start a request
+- *	@host: MMC host to start command
+- *	@mrq: MMC request to start
+- *
+- *	Start a new MMC custom command request for a host.
+- *	Does not wait for the command to complete.
+- */
+-void mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
+-{
+-	init_completion(&mrq->completion);
+-	mrq->done = mmc_wait_done;
+-
+-	mmc_start_request(host, mrq);
+-}
+-EXPORT_SYMBOL(mmc_start_req);
+-
+-/**
+- *	mmc_wait_for_req_done - wait for completion of request
+- *	@mrq: MMC request to wait for
+- *
+- *	Wait for the command to complete. Does not attempt to parse the
+- *	response.
+- */
+-void mmc_wait_for_req_done(struct mmc_request *mrq)
+-{
+-	wait_for_completion(&mrq->completion);
+-}
+-EXPORT_SYMBOL(mmc_wait_for_req_done);
+ 
+ /**
+  *	mmc_wait_for_req - start a request and wait for completion
+@@ -331,9 +212,16 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
+  */
+ void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
+ {
+-	mmc_start_req(host, mrq);
+-	mmc_wait_for_req_done(mrq);
++	DECLARE_COMPLETION_ONSTACK(complete);
++
++	mrq->done_data = &complete;
++	mrq->done = mmc_wait_done;
++
++	mmc_start_request(host, mrq);
++
++	wait_for_completion(&complete);
+ }
++
+ EXPORT_SYMBOL(mmc_wait_for_req);
+ 
+ /**
+diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
+index 588e76f..998797e 100644
+--- a/drivers/mmc/core/debugfs.c
++++ b/drivers/mmc/core/debugfs.c
+@@ -188,11 +188,6 @@ void mmc_add_host_debugfs(struct mmc_host *host)
+ 				root, &host->clk_delay))
+ 		goto err_node;
+ #endif
+-#ifdef CONFIG_FAIL_MMC_REQUEST
+-	if (!debugfs_create_u8("make-it-fail", S_IRUSR | S_IWUSR,
+-			       root, &host->make_it_fail))
+-		goto err_node;
+-#endif
+ 	return;
+ 
+ err_node:
+diff --git a/drivers/mmc/host/glamo-mci.c b/drivers/mmc/host/glamo-mci.c
+index 02c4b69..f298658 100644
+--- a/drivers/mmc/host/glamo-mci.c
++++ b/drivers/mmc/host/glamo-mci.c
+@@ -49,10 +49,10 @@ struct glamo_mci_host {
+ 	unsigned short vdd;
+ 	char power_mode;
+ 
+-	unsigned long transfer_start;
+-	unsigned long request_start;
+-
+ 	unsigned char request_counter;
++
++	struct workqueue_struct *workqueue;
++	struct work_struct read_work;
+ };
+ 
+ static void glamo_mci_send_request(struct mmc_host *mmc,
+@@ -165,21 +165,12 @@ static int glamo_mci_clock_enable(struct mmc_host *mmc)
+ 	return 0;
+ }
+ 
+-static void __iomem *glamo_mci_get_data_addr(struct glamo_mci_host *host,
+-	struct mmc_data *data)
+-{
+-	void __iomem *addr = host->data_base;
+-
+-	if (data->host_cookie & 1)
+-		addr += resource_size(host->data_mem) / 2;
+-
+-	return addr;
+-}
+ 
++#ifndef GLAMO_MCI_WORKER
+ static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+ {
+-	void __iomem *from_ptr = glamo_mci_get_data_addr(host, data);
+ 	struct sg_mapping_iter miter;
++	uint16_t __iomem *from_ptr = host->data_base;
+ 
+ 	dev_dbg(&host->pdev->dev, "pio_read():\n");
+ 
+@@ -187,7 +178,9 @@ static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+ 
+ 	while (sg_miter_next(&miter)) {
+ 		memcpy(miter.addr, from_ptr, miter.length);
+-		from_ptr += miter.length;
++		from_ptr += miter.length >> 1;
++
++		data->bytes_xfered += miter.length;
+ 	}
+ 
+ 	sg_miter_stop(&miter);
+@@ -195,18 +188,19 @@ static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+ 	dev_dbg(&host->pdev->dev, "pio_read(): "
+ 			"complete (no more data)\n");
+ }
++#endif
+ 
+ static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
+ {
+-	void __iomem *to_ptr = glamo_mci_get_data_addr(host, data);
+ 	struct sg_mapping_iter miter;
++	uint16_t __iomem *to_ptr = host->data_base;
+ 
+ 	dev_dbg(&host->pdev->dev, "pio_write():\n");
+ 	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
+ 
+ 	while (sg_miter_next(&miter)) {
+ 		memcpy(to_ptr, miter.addr, miter.length);
+-		to_ptr += miter.length;
++		to_ptr += miter.length >> 1;
+ 
+ 		data->bytes_xfered += miter.length;
+ 	}
+@@ -284,11 +278,12 @@ static irqreturn_t glamo_mci_irq(int irq, void *data)
+ 	if (mrq->stop)
+ 		glamo_mci_send_command(host, mrq->stop);
+ 
+-	if (mrq->data && (mrq->data->flags & MMC_DATA_READ)) {
+-		mrq->data->bytes_xfered = mrq->data->blocks * mrq->data->blksz;
+-		if (!mrq->data->host_cookie)
+-			do_pio_read(host, mrq->data);
+-	}
++	if (cmd->data->flags & MMC_DATA_READ)
++#ifndef GLAMO_MCI_WORKER
++		do_pio_read(host, cmd->data);
++#else
++		flush_workqueue(host->workqueue);
++#endif
+ 
+ 	if (mrq->stop)
+ 		mrq->stop->error = glamo_mci_wait_idle(host, jiffies + HZ);
+@@ -300,6 +295,64 @@ done:
+ 	return IRQ_HANDLED;
+ }
+ 
++#ifdef GLAMO_MCI_WORKER
++static void glamo_mci_read_worker(struct work_struct *work)
++{
++	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
++							read_work);
++	struct mmc_command *cmd;
++	uint16_t status;
++	uint16_t blocks_ready;
++	size_t data_read = 0;
++	size_t data_ready;
++	struct scatterlist *sg;
++	uint16_t __iomem *from_ptr = host->data_base;
++	void *sg_pointer;
++
++
++	cmd = host->mrq->cmd;
++	sg = cmd->data->sg;
++	do {
++		/*
++		 * TODO: How to get rid of that?
++		 * Maybe just drop it... In fact, it is already handled in
++		 * the IRQ handler, maybe we should only check cmd->error.
++		 * But the question is: what happens between the moment
++		 * the error occurs, and the moment the IRQ handler handles it?
++		 */
++		status = glamomci_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
++
++		if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
++			cmd->error = -ETIMEDOUT;
++		if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
++			cmd->error = -EILSEQ;
++		if (cmd->error) {
++			dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n",
++				status);
++			return;
++		}
++
++		blocks_ready = glamomci_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
++		data_ready = blocks_ready * cmd->data->blksz;
++
++		if (data_ready == data_read)
++			yield();
++
++		while (sg && data_read + sg->length <= data_ready) {
++			sg_pointer = page_address(sg_page(sg)) + sg->offset;
++			memcpy(sg_pointer, from_ptr, sg->length);
++			from_ptr += sg->length >> 1;
++
++			data_read += sg->length;
++
++			sg = sg_next(sg);
++		}
++
++	} while (sg);
++	cmd->data->bytes_xfered = data_read;
++}
++#endif
++
+ static void glamo_mci_send_command(struct glamo_mci_host *host,
+ 		struct mmc_command *cmd)
+ {
+@@ -480,29 +533,28 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
+ 					   (readw(&reg_resp[2]) << 24);
+ 		}
+ 	}
++
++#ifdef GLAMO_MCI_WORKER
++	/* We'll only get an interrupt when all data has been transfered.
++	   By starting to copy data when it's avaiable we can increase
++	   throughput by up to 30%. */
++	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
++		queue_work(host->workqueue, &host->read_work);
++#endif
++
+ }
+ 
+ static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+ 		struct mmc_data *data)
+ {
+-	unsigned long addr = host->data_mem->start;
+-
+-	if (data->host_cookie & 1)
+-		addr += resource_size(host->data_mem) / 2;
+-
+ 	/* set up the block info */
+ 	glamomci_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+ 	glamomci_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+ 
+-	if (data->flags & MMC_DATA_WRITE) {
+-		glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS1, addr);
+-		glamomci_reg_write(host, GLAMO_REG_MMC_WDATADS2, addr >> 16);
+-	} else {
+-		glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS1, addr);
+-		glamomci_reg_write(host, GLAMO_REG_MMC_RDATADS2, addr >> 16);
+-	}
++	data->bytes_xfered = 0;
+ 
+-	if ((data->flags & MMC_DATA_WRITE) && !data->host_cookie)
++	/* if write, prep the write into the shared RAM before the command */
++	if (data->flags & MMC_DATA_WRITE)
+ 		do_pio_write(host, data);
+ 
+ 	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+@@ -517,8 +569,6 @@ static void glamo_mci_send_request(struct mmc_host *mmc,
+ 	struct mmc_command *cmd = mrq->cmd;
+ 
+ 	host->request_counter++;
+-	host->request_start = jiffies;
+-
+ 	if (cmd->data) {
+ 		if (glamo_mci_prepare_pio(host, cmd->data)) {
+ 			cmd->error = -EIO;
+@@ -639,42 +689,21 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ 		mmc_host_lazy_disable(host->mmc);
+ }
+ 
+-static void glamo_mci_pre_request(struct mmc_host *mmc,
+-		struct mmc_request *mrq, bool is_first_req)
+-{
+-	struct glamo_mci_host *host = mmc_priv(mmc);
+-
+-	mrq->data->host_cookie = (host->request_counter & 1) | 2;
+-
+-	/* if write, prep the write into the shared RAM before the command */
+-	if (mrq->data->flags & MMC_DATA_WRITE)
+-		do_pio_write(host, mrq->data);
+-}
+ 
+-static void glamo_mci_post_request(struct mmc_host *mmc,
+-		struct mmc_request *mrq, int err)
++/*
++ * no physical write protect supported by us
++ */
++static int glamo_mci_get_ro(struct mmc_host *mmc)
+ {
+-	struct glamo_mci_host *host = mmc_priv(mmc);
+-
+-	if (!mrq->data->host_cookie)
+-		return;
+-
+-	if (err)
+-		return;
+-
+-	if (mrq->data->flags & MMC_DATA_READ)
+-		do_pio_read(host, mrq->data);
+-
+-	mrq->data->host_cookie = 0;
++	return 0;
+ }
+ 
+ static struct mmc_host_ops glamo_mci_ops = {
+ 	.enable		= glamo_mci_clock_enable,
+ 	.disable	= glamo_mci_clock_disable,
+ 	.request	= glamo_mci_send_request,
+-	.post_req	= glamo_mci_post_request,
+-	.pre_req	= glamo_mci_pre_request,
+ 	.set_ios	= glamo_mci_set_ios,
++	.get_ro		= glamo_mci_get_ro,
+ };
+ 
+ static int __devinit glamo_mci_probe(struct platform_device *pdev)
+@@ -702,6 +731,11 @@ static int __devinit glamo_mci_probe(struct platform_device *pdev)
+ 
+ 	host->irq = platform_get_irq(pdev, 0);
+ 
++#ifdef GLAMO_MCI_WORKER
++	INIT_WORK(&host->read_work, glamo_mci_read_worker);
++	host->workqueue = create_singlethread_workqueue("glamo-mci-read");
++#endif
++
+ 	host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
+ 	if (IS_ERR(host->regulator)) {
+ 		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+@@ -789,7 +823,7 @@ static int __devinit glamo_mci_probe(struct platform_device *pdev)
+ 
+ 	mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+ 	mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+-	mmc->max_req_size  = resource_size(host->data_mem) / 2;
++	mmc->max_req_size  = resource_size(host->data_mem);
+ 	mmc->max_seg_size  = mmc->max_req_size;
+ 	mmc->max_segs = 128;
+ 
+@@ -834,6 +868,9 @@ probe_free_mem_region_mmio:
+ probe_regulator_put:
+ 	regulator_put(host->regulator);
+ probe_free_host:
++#ifdef GLAMO_MCI_WORKER
++	destroy_workqueue(host->workqueue);
++#endif
+ 	mmc_free_host(mmc);
+ probe_out:
+ 	return ret;
+@@ -844,6 +881,11 @@ static int __devexit glamo_mci_remove(struct platform_device *pdev)
+ 	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+ 	struct glamo_mci_host *host = mmc_priv(mmc);
+ 
++#ifdef GLAMO_MCI_WORKER
++	flush_workqueue(host->workqueue);
++	destroy_workqueue(host->workqueue);
++#endif
++
+ 	mmc_host_enable(mmc);
+ 	mmc_remove_host(mmc);
+ 	mmc_host_disable(mmc);
+diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
+index cb5d2c0..66b75c6 100644
+--- a/drivers/mtd/nand/s3c2410.c
++++ b/drivers/mtd/nand/s3c2410.c
+@@ -773,6 +773,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ 	chip->priv	   = nmtd;
+ 	chip->options	   = set->options;
+ 	chip->controller   = &info->controller;
++	chip->badblockbits = 8;
+ 
+ 	switch (info->cpu_type) {
+ 	case TYPE_S3C2410:
+diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
+index a68af2d..02bd7b0 100644
+--- a/drivers/usb/host/ohci-s3c2410.c
++++ b/drivers/usb/host/ohci-s3c2410.c
+@@ -22,6 +22,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
+ #include <plat/usb-control.h>
++#include <mach/hardware.h>
++#include <mach/gpio-fns.h>
++#include <mach/regs-gpio.h>
++#include <mach/gta02.h>
+ 
+ #define valid_port(idx) ((idx) == 1 || (idx) == 2)
+ 
+@@ -306,6 +310,42 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+ 	local_irq_restore(flags);
+ }
+ 
++/* switching of USB pads */
++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
++			     char *buf)
++{
++	if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
++		return sprintf(buf, "host\n");
++
++	return sprintf(buf, "device\n");
++}
++
++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
++			    const char *buf, size_t count)
++{
++	if (!strncmp(buf, "host", 4)) {
++		printk("s3c2410: changing usb to host\n");
++		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
++				      S3C2410_MISCCR_USBHOST);
++		/* FIXME:
++		 * - call machine-specific disable-pullup function i
++		 * - enable +Vbus (if hardware supports it)
++		 */
++		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
++	} else if (!strncmp(buf, "device", 6)) {
++		printk("s3c2410: changing usb to device\n");
++		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
++		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
++	} else {
++		printk("s3c2410: unknown mode\n");
++		return -EINVAL;
++	}
++
++	return count;
++}
++
++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
++
+ /* may be called without controller electrically present */
+ /* may be called with controller, bus, and devices active */
+ 
+@@ -323,6 +363,7 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+ static void
+ usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+ {
++	device_remove_file(&dev->dev, &dev_attr_usb_mode);
+ 	usb_remove_hcd(hcd);
+ 	s3c2410_stop_hc(dev);
+ 	iounmap(hcd->regs);
+@@ -390,8 +431,15 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+ 	if (retval != 0)
+ 		goto err_ioremap;
+ 
++	retval = device_create_file(&dev->dev, &dev_attr_usb_mode);
++	if (retval != 0)
++		goto err_hcd;
++
+ 	return 0;
+ 
++ err_hcd:
++	usb_remove_hcd(hcd);
++
+  err_ioremap:
+ 	s3c2410_stop_hc(dev);
+ 	iounmap(hcd->regs);
+diff --git a/drivers/video/glamo-fb.c b/drivers/video/glamo-fb.c
+index 45f5a2b..6c3fe9c 100644
+--- a/drivers/video/glamo-fb.c
++++ b/drivers/video/glamo-fb.c
+@@ -312,7 +312,7 @@ static int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+ 			glamofb_reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ 				  GLAMO_LCD_CMD_TYPE_DISP |
+ 				  GLAMO_LCD_CMD_DATA_DISP_SYNC);
+-
++		mdelay(1);
+ 		glamofb_reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ 			  GLAMO_LCD_CMD_TYPE_DISP |
+ 			  GLAMO_LCD_CMD_DATA_DISP_FIRE);
+diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
+new file mode 100644
+index 0000000..01c4ac9
+--- /dev/null
++++ b/include/linux/lis302dl.h
+@@ -0,0 +1,155 @@
++#ifndef _LINUX_LIS302DL_H
++#define _LINUX_LIS302DL_H
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++#include <linux/input.h>
++
++
++struct lis302dl_info;
++
++struct lis302dl_platform_data {
++	char *name;
++	unsigned long pin_chip_select;
++	unsigned long pin_clk;
++	unsigned long pin_mosi;
++	unsigned long pin_miso;
++	int open_drain;
++	int interrupt;
++	void (*lis302dl_bitbang)(struct lis302dl_info *lis, u8 *tx,
++			int tx_bytes, u8 *rx, int rx_bytes);
++	void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
++	int (*lis302dl_bitbang_reg_read)(struct lis302dl_info *, u8 reg);
++	void (*lis302dl_bitbang_reg_write)(struct lis302dl_info *, u8 reg,
++									u8 val);
++};
++
++struct lis302dl_info {
++	struct lis302dl_platform_data *pdata;
++	struct device *dev;
++	struct input_dev *input_dev;
++	unsigned int flags;
++	unsigned int threshold;
++	unsigned int duration;
++	u32 overruns;
++	struct {
++		unsigned int threshold; /* mg */
++		unsigned int duration;  /* ms */
++	} wakeup;
++	u_int8_t regs[0x40];
++};
++
++enum lis302dl_reg {
++	LIS302DL_REG_WHO_AM_I		= 0x0f,
++	LIS302DL_REG_CTRL1		= 0x20,
++	LIS302DL_REG_CTRL2		= 0x21,
++	LIS302DL_REG_CTRL3		= 0x22,
++	LIS302DL_REG_HP_FILTER_RESET	= 0x23,
++	LIS302DL_REG_STATUS		= 0x27,
++	LIS302DL_REG_OUT_X		= 0x29,
++	LIS302DL_REG_OUT_Y		= 0x2b,
++	LIS302DL_REG_OUT_Z		= 0x2d,
++	LIS302DL_REG_FF_WU_CFG_1	= 0x30,
++	LIS302DL_REG_FF_WU_SRC_1	= 0x31,
++	LIS302DL_REG_FF_WU_THS_1	= 0x32,
++	LIS302DL_REG_FF_WU_DURATION_1	= 0x33,
++	LIS302DL_REG_FF_WU_CFG_2	= 0x34,
++	LIS302DL_REG_FF_WU_SRC_2	= 0x35,
++	LIS302DL_REG_FF_WU_THS_2	= 0x36,
++	LIS302DL_REG_FF_WU_DURATION_2	= 0x37,
++	LIS302DL_REG_CLICK_CFG		= 0x38,
++	LIS302DL_REG_CLICK_SRC		= 0x39,
++	LIS302DL_REG_CLICK_THSY_X	= 0x3b,
++	LIS302DL_REG_CLICK_THSZ		= 0x3c,
++	LIS302DL_REG_CLICK_TIME_LIMIT	= 0x3d,
++	LIS302DL_REG_CLICK_LATENCY	= 0x3e,
++	LIS302DL_REG_CLICK_WINDOW	= 0x3f,
++};
++
++enum lis302dl_reg_ctrl1 {
++	LIS302DL_CTRL1_Xen		= 0x01,
++	LIS302DL_CTRL1_Yen		= 0x02,
++	LIS302DL_CTRL1_Zen		= 0x04,
++	LIS302DL_CTRL1_STM		= 0x08,
++	LIS302DL_CTRL1_STP		= 0x10,
++	LIS302DL_CTRL1_FS		= 0x20,
++	LIS302DL_CTRL1_PD		= 0x40,
++	LIS302DL_CTRL1_DR		= 0x80,
++};
++
++enum lis302dl_reg_ctrl2 {
++	LIS302DL_CTRL2_HPC1		= 0x01,
++	LIS302DL_CTRL2_HPC2		= 0x02,
++	LIS302DL_CTRL2_HPFF1		= 0x04,
++	LIS302DL_CTRL2_HPFF2		= 0x08,
++	LIS302DL_CTRL2_FDS		= 0x10,
++	LIS302DL_CTRL2_BOOT		= 0x40,
++	LIS302DL_CTRL2_SIM		= 0x80,
++};
++enum lis302dl_reg_ctrl3 {
++	LIS302DL_CTRL3_PP_OD		= 0x40,
++	LIS302DL_CTRL3_IHL		= 0x80,
++};
++
++enum lis302dl_reg_status {
++	LIS302DL_STATUS_XDA		= 0x01,
++	LIS302DL_STATUS_YDA		= 0x02,
++	LIS302DL_STATUS_ZDA		= 0x04,
++	LIS302DL_STATUS_XYZDA		= 0x08,
++	LIS302DL_STATUS_XOR		= 0x10,
++	LIS302DL_STATUS_YOR		= 0x20,
++	LIS302DL_STATUS_ZOR		= 0x40,
++	LIS302DL_STATUS_XYZOR		= 0x80,
++};
++
++/* Wakeup/freefall interrupt defs */
++enum lis302dl_reg_ffwucfg {
++	LIS302DL_FFWUCFG_XLIE		= 0x01,
++	LIS302DL_FFWUCFG_XHIE		= 0x02,
++	LIS302DL_FFWUCFG_YLIE		= 0x04,
++	LIS302DL_FFWUCFG_YHIE		= 0x08,
++	LIS302DL_FFWUCFG_ZLIE		= 0x10,
++	LIS302DL_FFWUCFG_ZHIE		= 0x20,
++	LIS302DL_FFWUCFG_LIR		= 0x40,
++	LIS302DL_FFWUCFG_AOI		= 0x80,
++};
++
++enum lis302dl_reg_ffwuths {
++	LIS302DL_FFWUTHS_DCRM		= 0x80,
++};
++
++enum lis302dl_reg_ffwusrc {
++	LIS302DL_FFWUSRC_XL		= 0x01,
++	LIS302DL_FFWUSRC_XH		= 0x02,
++	LIS302DL_FFWUSRC_YL		= 0x04,
++	LIS302DL_FFWUSRC_YH		= 0x08,
++	LIS302DL_FFWUSRC_ZL		= 0x10,
++	LIS302DL_FFWUSRC_ZH		= 0x20,
++	LIS302DL_FFWUSRC_IA		= 0x40,
++};
++
++enum lis302dl_reg_cloik_src {
++	LIS302DL_CLICKSRC_SINGLE_X	= 0x01,
++	LIS302DL_CLICKSRC_DOUBLE_X	= 0x02,
++	LIS302DL_CLICKSRC_SINGLE_Y	= 0x04,
++	LIS302DL_CLICKSRC_DOUBLE_Y	= 0x08,
++	LIS302DL_CLICKSRC_SINGLE_Z	= 0x10,
++	LIS302DL_CLICKSRC_DOUBLE_Z	= 0x20,
++	LIS302DL_CLICKSRC_IA		= 0x40,
++};
++
++#define LIS302DL_WHO_AM_I_MAGIC		0x3b
++
++#define LIS302DL_F_WUP_FF_1		0x0001	/* wake up from free fall */
++#define LIS302DL_F_WUP_FF_2		0x0002
++#define LIS302DL_F_WUP_FF		0x0003
++#define LIS302DL_F_WUP_CLICK	0x0004
++#define LIS302DL_F_POWER		0x0010
++#define LIS302DL_F_FS			0x0020 	/* ADC full scale */
++#define LIS302DL_F_INPUT_OPEN 	0x0040  /* Set if input device is opened */
++#define LIS302DL_F_IRQ_WAKE 	0x0080  /* IRQ is setup in wake mode */
++#define LIS302DL_F_DR			0x0100 	/* Data rate, 400Hz/100Hz */
++
++
++#endif /* _LINUX_LIS302DL_H */
++
+diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
+index 5bbfb71..07f27af 100644
+--- a/include/linux/mmc/core.h
++++ b/include/linux/mmc/core.h
+@@ -117,7 +117,6 @@ struct mmc_data {
+ 
+ 	unsigned int		sg_len;		/* size of scatter list */
+ 	struct scatterlist	*sg;		/* I/O scatter list */
+-	s32			host_cookie;	/* host private data */
+ };
+ 
+ struct mmc_request {
+@@ -125,19 +124,13 @@ struct mmc_request {
+ 	struct mmc_data		*data;
+ 	struct mmc_command	*stop;
+ 
+-	struct completion	completion;
++	void			*done_data;	/* completion data */
+ 	void			(*done)(struct mmc_request *);/* completion function */
+ };
+ 
+ struct mmc_host;
+ struct mmc_card;
+ 
+-extern void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
+-			bool is_first_req);
+-extern void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
+-			 int err);
+-extern void mmc_start_req(struct mmc_host *host, struct mmc_request *mrq);
+-extern void mmc_wait_for_req_done(struct mmc_request *mrq);
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
+index 8b2b44b..bcb793e 100644
+--- a/include/linux/mmc/host.h
++++ b/include/linux/mmc/host.h
+@@ -88,15 +88,6 @@ struct mmc_host_ops {
+ 	 */
+ 	int (*enable)(struct mmc_host *host);
+ 	int (*disable)(struct mmc_host *host, int lazy);
+-	/*
+-	 * It is optional for the host to implement pre_req and post_req in
+-	 * order to support double buffering of requests (prepare one
+-	 * request while another request is active).
+-	 */
+-	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
+-			    int err);
+-	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req,
+-			   bool is_first_req);
+ 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+ 	/*
+ 	 * Avoid calling these three functions too often or in a "fast path",
+@@ -251,9 +242,7 @@ struct mmc_host {
+ #endif
+ 
+ 	struct dentry		*debugfs_root;
+-#ifdef CONFIG_FAIL_MMC_REQUEST
+-	u8			make_it_fail;
+-#endif
++
+ 	unsigned long		private[0] ____cacheline_aligned;
+ };
+ 
+diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
+index 330fc70..c768bcd 100644
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -1057,17 +1057,6 @@ config FAIL_IO_TIMEOUT
+ 	  Only works with drivers that use the generic timeout handling,
+ 	  for others it wont do anything.
+ 
+-config FAIL_MMC_REQUEST
+-	bool "Fault-injection capability for MMC IO"
+-	select DEBUG_FS
+-	depends on FAULT_INJECTION
+-	help
+-	  Provide fault-injection capability for MMC IO.
+-	  This will make the mmc core return data errors. This is
+-	  useful for testing the error handling in the mmc block device
+-	  and how the mmc host driver handle retries from
+-	  the block device.
+-
+ config FAULT_INJECTION_DEBUG_FS
+ 	bool "Debugfs entries for fault-injection capabilities"
+ 	depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
+index 4f845fe..a4700c0 100644
+--- a/sound/soc/samsung/neo1973_wm8753.c
++++ b/sound/soc/samsung/neo1973_wm8753.c
+@@ -19,6 +19,7 @@
+ #include <linux/gpio.h>
+ 
+ #include <sound/soc.h>
++#include <sound/jack.h>
+ 
+ #include <asm/mach-types.h>
+ #include <plat/regs-iis.h>
+@@ -204,6 +205,27 @@ static const struct snd_soc_dapm_widget neo1973_wm8753_dapm_widgets[] = {
+ 	SND_SOC_DAPM_MIC("Handset Mic", NULL),
+ };
+ 
++static struct snd_soc_jack_pin hs_jack_pins[] = {
++	{
++		.pin = "Headset Mic",
++		.mask = SND_JACK_MICROPHONE,
++	},
++	{
++		.pin = "Stereo Out",
++		.mask = SND_JACK_HEADPHONE,
++		.invert = 1,
++	},
++};
++
++static struct snd_soc_jack_gpio hs_jack_gpios[] = {
++	{
++		.gpio = GTA02_GPIO_JACK_INSERT,
++		.name = "headset-gpio",
++		.report = SND_JACK_HEADSET,
++		.debounce_time = 100,
++	},
++};
++
+ static const struct snd_soc_dapm_route neo1973_wm8753_routes[] = {
+ 	/* Connections to the GSM Module */
+ 	{"GSM Line Out", NULL, "MONO1"},
+@@ -377,6 +399,8 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
+ 
+ /* GTA01 specific controls */
+ 
++static struct snd_soc_jack hs_jack;
++
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+ 
+ static const struct snd_soc_dapm_route neo1973_lm4857_routes[] = {
+@@ -512,6 +536,24 @@ static int __init neo1973_init(void)
+ 	if (ret)
+ 		goto err_put_device;
+ 
++	err = snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET, &hs_jack);
++	if (err) {
++		dev_err(codec->card->dev, "failed to alloc headset jack\n");
++		return err;
++	}
++
++	err = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), hs_jack_pins);
++	if (err) {
++		dev_err(codec->card->dev, "failed to add headset jack pins\n");
++		return err;
++	}
++
++	err = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios), hs_jack_gpios);
++	if (err) {
++		dev_err(codec->card->dev, "failed to add headset jack gpios\n");
++		return err;
++	}
++
+ 	return 0;
+ 
+ err_put_device:
+@@ -527,6 +569,7 @@ module_init(neo1973_init);
+ 
+ static void __exit neo1973_exit(void)
+ {
++	snd_soc_jack_free_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios), hs_jack_gpios);
+ 	platform_device_unregister(neo1973_snd_device);
+ 
+ 	if (machine_is_neo1973_gta02()) {
diff --git a/recipes/linux/linux-at91sam9x5ek_2.6.39.bb b/recipes/linux/linux-at91sam9x5ek_2.6.39.bb
new file mode 100644
index 0000000000..b544773cfa
--- /dev/null
+++ b/recipes/linux/linux-at91sam9x5ek_2.6.39.bb
@@ -0,0 +1,138 @@
+require linux.inc
+
+PR = "r1"
+
+DESCRIPTION = "Linux kernel for AT91SAM9X5 chips"
+KERNEL_IMAGETYPE = "uImage"
+
+COMPATIBLE_MACHINE = "at91sam9x5ek"
+
+DEFAULT_PREFERENCE = "-1"
+DEFAULT_PREFERENCE_at91sam9x5ek = "99"
+
+SRC_URI = " \
+    ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
+    "
+
+SRC_URI_append = " \
+    ftp://ftp.linux4sam.org/pub/linux/2.6.39-at91/2.6.39-at91-exp.tar.gz;name=at91exp \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0001-dmaengine-at_hdmac-modify-way-to-use-interrupts.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0002-dmaengine-at_hdmac-add-cyclic-DMA-operation-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0003-dmaengine-at_hdmac-debug-information-sg_len-for-prep.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0004-dmaengine-at_hdmac-remove-channel-status-testing-in-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0005-dmaengine-at_hdmac-specialize-AHB-interfaces-to-opti.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0006-dmaengine-AT91SAM9X5-has-a-Atmel-AHB-DMA-engine.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0007-rtc-at91-workaround-for-5series-ES-chips.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0008-rtc-AT91SAM9X5-has-an-at91_rtc.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0009-ARM-at91-overall-definition-add-5series-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0010-ARM-at91-PMC-header-add-5series-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0011-ARM-at91-clock-add-5series-chip-family-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0012-ARM-at91-AT91SAM9x5-processors-and-EK-board-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0013-ARM-at91-provide-defconfig-for-at91sam9x5ek.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0014-usb-AT91SAM9X5-has-EHCI.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0015-ARM-at91-pio-add-new-PIO3a-features.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0016-usb-AT91SAM9X5-has-a-atmel_usba_udc-device.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0017-clocksource-tcb-add-support-for-32-bit-mode.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0018-mmc-atmel-mci-add-support-for-ARCH_AT91SAM9X5.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0019-serial-atmel-convert-to-use-dma-engine.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0020-video-atmel_lcdfb-add-support-for-AT91SAM9x5.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0021-video-atmel_lcdfb-The-output-bpp-should-not-change-a.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0022-input-atmel_tsadcc-add-support-for-ARCH_AT91SAM9X5.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0023-input-atmel_tsadcc-add-touch-screen-pressure-measure.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0024-input-atmel_tsadcc-enable-touchscreen-averaging-and-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0025-input-atmel_tsadcc-add-ACR-register-and-change-trigg.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0026-MTD-atmel_nand-Add-PMECC-controller-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0027-MTD-atmel_nand-optimize-read-write-buffer-functions.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0028-spi-atmel_spi-trivial-change-some-comments.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0029-spi-atmel_spi-add-physical-base-address.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0030-spi-atmel_spi-call-unmapping-on-transfers-buffers.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0031-spi-atmel_spi-status-information-passed-through-cont.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0032-spi-atmel_spi-add-flag-to-controller-data-for-lock-o.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0033-spi-atmel_spi-add-dmaengine-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0034-net-can-allow-CAN_AT91-on-AT91SAM9X5.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0035-Input-qt1070-Add-MODULE_DEVICE_TABLE.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0036-Input-qt1070-trivial-fix-CHANGE-line-typo.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0037-Input-qt1070-add-power-management-suspend-resume.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0038-dmaengine-at_hdmac-clear-channel-status-on-channel-r.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0039-dmaengine-at_hdmac-set-residue-as-total-len-in-atc_t.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0040-dmaengine-at_hdmac-implement-pause-and-resume-in-atc.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0041-dmaengine-at_hdmac-pause-no-need-to-wait-for-FIFO-em.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0042-dmaengine-at_hdmac-replace-spin_lock-with-irqsave-va.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0043-dmaengine-at_hdmac-improve-power-management-routines.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0044-sound-atmel-pcm-trivial-typo-in-debug-comment.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0045-sound-atmel-pcm-trivial-typo-in-atmel_pcm_dma_params.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0046-dmaengine-at_hdmac-add-slave-config-operation.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0047-SPI-m25p80-add-serial-flash-IDs.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0048-sound-wm8731-rework-power-management.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0049-atmel-ssc-add-phybase-in-device-structure.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0050-atmel-ssc-dmaengine-usage-switch-depending-on-cpu.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0051-sound-atmel_ssc_dai-fix-ssc-error-path.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0052-sound-atmel_ssc_dai-atmel-pmc-adapt-to-dmaengine-usa.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0053-sound-sam9x5_wm8731-machine-driver-for-at91sam9x5-wm.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0054-mtd-atmel_nand-do-not-scream-while-using-PIO-instead.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0055-MMC-PM-suspend-resume-in-atmel-mci.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0056-ASoc-wm8731-fix-wm8731_check_osc-connected-condition.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0057-ASoc-sam9g20_wm8731-use-the-proper-SYSCKL-value.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0058-sound-atmel_ssc_dai-PM-actually-stopping-clock-on-su.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0059-ARM-at91-sam9x5-increase-CONSISTENT_DMA_SIZE.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0060-SPI-atmel_spi-add-bit-in-mode-register-to-prevent-ov.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0061-media-at91sam9x5-video-new-driver-for-the-high-end-o.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0062-can-at91_can-don-t-align-struct-definitions.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0063-can-at91_can-fix-comment-about-priv-tx_next.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0064-can-at91_can-don-t-copy-data-to-rx-ed-RTR-frames.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0065-can-at91_can-let-get_tx_-functions-return-unsigned-i.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0066-can-at91_can-directly-define-AT91_MB_RX_LAST.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0067-can-at91_can-rename-AT91_MB_RX_MASK-to-AT91_IRQ_MB_R.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0068-can-at91_can-convert-derived-mailbox-constants-into-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0069-can-at91_can-add-id_table-and-convert-prime-mailbox-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0070-can-at91_can-register-mb0-sysfs-entry-only-on-at91sa.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0071-can-at91_can-add-support-for-the-AT91SAM9X5-SOCs.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0072-media-V4L-videobuf2-memops-use-pr_debug-for-debug-me.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0073-video-atmelfb-initially-split-atmelfb-into-a-driver-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0074-video-atmelfb-refactor-core-setup.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0075-video-atmelfb-refactor-start-stop.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0076-video-atmelfb-refactor-isr.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0077-video-atmelfb-refactor-backlight-routines.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0078-video-atmelfb-refactor-dma_update.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0079-video-atmelfb-refactor-LUT.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0080-video-atmelfb-refactor-limit_screeninfo.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0081-arm-at91-refactor-lcdc-includes.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0082-video-atmel_hlcdfb-add-new-driver.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0083-arm-at91-sam9x5-use-new-hlcdc-driver.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0084-arm-at91-sam9x5ek-use-16bpp-as-default-for-fb.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0085-create-platform-device-for-ovl1.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0086-WIP-add-clut-resource.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0087-video-atmel_lcdfb-add-error-msg-when-out-of-memory.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0088-Don-t-shortcut-vb2_reqbufs-in-case-the-format-change.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0089-at91-video-change-atmel-lcdfb-driver-selection-mode.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0090-sound-atmel_ssc_dai-add-a-missing-space-to-an-error-.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0091-at91-add-Atmel-Image-Sensor-Interface-ISI-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0092-add-isi-support-in-board-files.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0093-media-at91-add-dumb-set_parm.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0094-AT91-5series-add-ISI-device-and-board-support.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0095-AT91-board-remove-not-needed-comments.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0096-AT91-5series-update-defconfig.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0097-AT91-input-atmel_tsadcc-rework-irq-infrastructure-an.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0098-5series-Update-LCD-timings-to-avoid-flickering.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0099-atmel_lcdfb-change-pixel-clock-ratio-calculation.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0100-MTD-atmel_nand_pmecc-fix-warning-about-uninitialized.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0101-MTD-atmel_nand-fix-wrong-use-of-0-as-NULL.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0102-ASoC-wm8731-active-bit-and-OSC-management.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0103-AT91-at91sam9x5-add-can-clocks-to-9x25-chip.patch;apply=yes \
+    file://${WORKDIR}/2.6.39-at91-exp/2.6.39-at91-exp-0104-AT91-LCD-include-remove-not-needed-comment.patch;apply=yes \
+    "
+
+SRC_URI[kernel.md5sum] = "1aab7a741abe08d42e8eccf20de61e05"
+SRC_URI[kernel.sha256sum] = "584d17f2a3ee18a9501d7ff36907639e538cfdba4529978b8550c461d45c61f6"
+
+SRC_URI[at91exp.md5sum] = "5ef5bcb680a4f799a7bd16b2dc62d157"
+SRC_URI[at91exp.sha256sum] = "01fe8819ab40086aa4d73d4ea777db93d4354723a8a43133be60812f50779898"
+
+S = "${WORKDIR}/linux-${PV}"
+
+do_configure_prepend() {
+	#install -m 0644 ${S}/arch/arm/configs/at91sam9x5ek_defconfig 
+	#install -m 0644 ${S}/arch/arm/configs/at91sam9x5ek_defconfig ${S}/.config
+	yes '' | oe_runmake at91sam9x5ek_defconfig
+	install -m 0644 ${S}/.config ${WORKDIR}/defconfig
+}
diff --git a/recipes/linux/linux_2.6.39.2.bb b/recipes/linux/linux_2.6.39.2.bb
new file mode 100644
index 0000000000..cd461d0f30
--- /dev/null
+++ b/recipes/linux/linux_2.6.39.2.bb
@@ -0,0 +1,56 @@
+require linux.inc
+
+PR = "r2"
+
+# Mark archs/machines that this kernel supports
+DEFAULT_PREFERENCE = "-1"
+
+DEFAULT_PREFERENCE_at91sam9260ek	= "3"
+DEFAULT_PREFERENCE_at91sam9261ek	= "3"
+DEFAULT_PREFERENCE_at91sam9263ek	= "3"
+DEFAULT_PREFERENCE_at91sam9g10ek	= "3"
+DEFAULT_PREFERENCE_at91sam9g20ek	= "3"
+DEFAULT_PREFERENCE_at91sam9g20ek_2mmc	= "3"
+DEFAULT_PREFERENCE_at91sam9g35ek	= "3"
+DEFAULT_PREFERENCE_at91sam9g45ek	= "3"
+DEFAULT_PREFERENCE_at91sam9g45ekes	= "3"
+DEFAULT_PREFERENCE_at91sam9m10ekes	= "3"
+DEFAULT_PREFERENCE_at91sam9m10g45ek	= "3"
+DEFAULT_PREFERENCE_at91sam9rlek		= "3"
+DEFAULT_PREFERENCE_at91sam9x5ek		= "3"
+DEFAULT_PREFERENCE_at572d940hfek	= "3"
+
+KERNELORG_MIRROR="ftp://ftp.sunet.se/pub/Linux/kernel.org"
+
+AT91_EXPERIMENTAL = ""
+
+SRC_URI = " \
+	${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
+	file://at91/0001-Support-configurable-NAND-partitions-for-Atmel-at91-.patch \
+	file://at91/0002-at91-defconfigs-add-tmpfs-and-ubi.patch \
+	file://at91/0003-Revert-diopsis-NAND-patch-affected-NOR-flash.patch \
+	file://at91/0004-Add-MMC-debugging.patch \
+	file://at91/0005-Add-sam9g20_2mmc-defconfig-with-MMC-debugging.patch \
+	file://defconfig	\
+	"
+
+SRC_URI_append_at91 = 	"ftp://ftp.linux4sam.org/pub/linux/2.6.39-at91/2.6.39-at91-exp${AT91_EXPERIMENTAL}.tar.gz;apply=no;name=at91exp${AT91_EXPERIMENTAL}"
+
+addtask do_apply_at91_exp_patch before do_patch after do_unpack
+
+do_apply_at91_exp_patch () {
+	cd	${S}
+	for	f in `ls ../2.6.39-at91-exp${AT91_EXPERIMENTAL}/*.patch` ; do
+		cat $f	| patch -p1
+	done
+}
+
+#SRC_URI[kernel.md5sum] = "1aab7a741abe08d42e8eccf20de61e05"
+#SRC_URI[kernel.sha256sum] = "584d17f2a3ee18a9501d7ff36907639e538cfdba4529978b8550c461d45c61f6"
+SRC_URI[kernel.md5sum] = "51be93d92028658ec93f68b79a378b17"
+SRC_URI[kernel.sha256sum] = "ac46f61dea59273554547ca3a11e64706722ccefd8e2dc94a831faf31412da22"
+SRC_URI[stablepatch.md5sum] = "6f81e64e790eb7847773eec4f7cbf207"
+SRC_URI[stablepatch.sha256sum] = "c0ef45692a80656ffb462c5b45b6226dc9c78b074f24164992c2a1eaf0ba5b78"
+SRC_URI[at91exp.md5sum] = "5ef5bcb680a4f799a7bd16b2dc62d157"
+SRC_URI[at91exp.sha256sum] = "01fe8819ab40086aa4d73d4ea777db93d4354723a8a43133be60812f50779898"
+
diff --git a/recipes/linux/linux_2.6.39.bb b/recipes/linux/linux_2.6.39.bb
index 53ab82fee4..84b59df649 100644
--- a/recipes/linux/linux_2.6.39.bb
+++ b/recipes/linux/linux_2.6.39.bb
@@ -1,6 +1,6 @@
 require linux.inc
 
-PR = "r2"
+PR = "r4"
 
 # Mark archs/machines that this kernel supports
 DEFAULT_PREFERENCE = "-1"
@@ -13,20 +13,42 @@ DEFAULT_PREFERENCE_tosa = "1"
 #DEFAULT_PREFERENCE_om-gta01 = "1"
 #DEFAULT_PREFERENCE_om-gta02 = "1"
 DEFAULT_PREFERENCE_h1940 = "1"
+DEFAULT_PREFERENCE_at91sam9g35ek = "1"
 
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
-           ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.2.bz2;apply=yes;name=stablepatch \
+AT91_MIRROR = "ftp://ftp.linux4sam.org/pub/linux"
+AT91_EXPERIMENTAL = "at91-exp"
+AT91_PATCH = "${PV}-${AT91_EXPERIMENTAL}"
+AT91_PATCH_DIR = ${WORKDIR}/${AT91_PATCH}"
+AT91_PATCH_LIST = "${AT91_PATCH_DIR}/series
+
+SRC_URI = "${KERNELSRC_MIRROR}/v2.6/linux-${PV}.tar.bz2;name=kernel \
+           ${KERNELSRC_MIRROR}/v2.6/patch-${PV}.2.bz2;apply=yes;name=stablepatch \
            file://defconfig "
 
 SRC_URI_append_om-gta01 = " \
            file://openmoko.patch \
            file://shr.patch \
            "
+
 SRC_URI_append_om-gta02 = " \
            file://openmoko.patch \
            file://shr.patch \
            "
 
+SRC_URI_append_at91 = 	" \
+	   ${AT91_MIRROR}/${PV}-at91/${AT91_PATCH}.tar.gz;apply=no;name=at91-exp"
+
+addtask do_apply_at91_exp_patch before do_patch after do_unpack
+
+do_apply_at91_exp_patch () {
+	cd	${AT91_PATCH_DIR}
+	ls	*.patch > ${AT91_PATCH_LIST}
+	cd	${S}
+	for	f in `cat ${AT91_PATCH_LIST}` ; do
+		cat $f	| patch -p1
+	done
+}
+
 SRC_URI_append_akita = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
 SRC_URI_append_c7x0 = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
 SRC_URI_append_collie = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
@@ -38,3 +60,5 @@ SRC_URI[kernel.md5sum] = "1aab7a741abe08d42e8eccf20de61e05"
 SRC_URI[kernel.sha256sum] = "584d17f2a3ee18a9501d7ff36907639e538cfdba4529978b8550c461d45c61f6"
 SRC_URI[stablepatch.md5sum] = "6f81e64e790eb7847773eec4f7cbf207"
 SRC_URI[stablepatch.sha256sum] = "c0ef45692a80656ffb462c5b45b6226dc9c78b074f24164992c2a1eaf0ba5b78"
+SRC_URI[at91-exp.md5sum] = "5ef5bcb680a4f799a7bd16b2dc62d157"
+SRC_URI[at91-exp.sha256sum] = "01fe8819ab40086aa4d73d4ea777db93d4354723a8a43133be60812f50779898"