Age | Commit message (Collapse) | Author |
|
Also, write to it only if it does not already exist.
As discussed here[1], reading from templateconf.cfg serves no purpose:
it exists only if the build directory has already been initialized, and so
the scripts will not change anything in the build directory anyway.
My adjustment is to keep the file however; it is useful as a pointer
to the original template, which can be utilized by config management
tools in the future.
[1] https://lists.openembedded.org/g/openembedded-architecture/topic/template_handling_in_oe_core/93968540
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 20d43a2 allows changes in fstab for the / mount. However, if the
fstab contains / already then this results in two entries for / in the
fstab, which is confusing and results in systemd producing errors on
boot:
systemd-fstab-generator[11101]: Failed to create unit file
/run/systemd/generator/-.mount, as it already exists. Duplicate entry
in /etc/fstab?
Wic should be extended to support merging mount points in fstab, but as
we're about to release revert the patch that introduced this change as
it hasn't been in a release yet, and the issue which prompted the patch
in the first place can be revisited post-release.
[ YOCTO #14865 ]
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Many git repos prefer https:// nowadays and many removed support
for git://.
This breaks the script when using github.com even when selected remote
is ssh (git@github.com:openembedded/...), it will re-write it to git://
before calling git pull-request causing:
openembedded-core $ scripts/create-pull-request -u github -b jansa/artifacts -o pull-kernel
NOTE: Assuming local branch HEAD, use -l to override.
fatal: unable to connect to github.com:
github.com[0: 140.82.121.3]: errno=Connection timed out
warn: No match for commit ea003bd026aa24bb4c8b7562f44ed6512e921259 found at git://github.com/shr-distribution/oe-core
warn: Are you sure you pushed 'jansa/artifacts' there?
ERROR: git request-pull reported an error
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to be able to debug issues on the host that have an impact on the
guest, it is useful to get the uptime of the host while starting so we can
match with the events in dmesg. Also include the uptime when cleaning up.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This holds true for the default core/poky template, but not
anything else. Eventually there will be fragments and associated
tooling.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intent of the templateconf.cfg file is to cache the value of
$TEMPLATECONF. To do this, it needs to be updated in case TEMPLATECONF
is manually specified.
Before, the following commands:
TEMPLATECONF=foo . oe-init-build-env
TEMPLATECONF=bar . oe-init-build-env
. oe-init-build-env
would cause the templates in foo to be used for the last source of
oe-init-build-env, while afterwards, bar is used as expected.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before commit 7b96dc80 (scripts/oe-setup-builddir: write to
conf/templateconf.cfg after the build is set up), the path written to
templateconf.cfg was relative if $TEMPLATECONF was relative, but
afterwards it became absolute.
Restore the original behavior of saving the relative path to
templateconf.cfg.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoid the following warnings:
* SC2086: Double quote to prevent globbing and word splitting.
* SC2164: Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
* SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
* SC2236: Use -n instead of ! -z.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The validation of the templates directory is supposed to be run as long
as $TEMPLATECONF is defined, but it was only done if the directory did
not exist.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
source for TEMPLATECONF
This sets the following order:
1. TEMPLATECONF set in the unix environment (for example as a
prefix to '. oe-init-build-env').
2. If empty then $BUILDDIR/conf/templateconf.cfg
3. If absent then $OEROOT/.templateconf (oe-init-build-env sets OEROOT
to where it is, which is poky or oe-core).
I believe this is more logical and consistent with common practice;
it also avoids situations where the user is stuck with cryptic
errors because templateconf.cfg contains something invalid and
that something cannot be overridden from command line.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
set up
This was done before any of the sanity checks or actual setup, which
resulted in templateconf.cfg always getting written out, whether it
would be valid or not, and the user becoming stuck with it.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a leftover from one of the RFC iterations, where
the property contained available machines, distros and templates.
As all of those were dropped from the final version, there is no
reason to list the layers either anymore.
Normally this would be a backwards incompatible change, but as
the layer setup itself was just merged, I think we can do a quick
fixup :-)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
template locations
This is done only for default oe-core/poky templates; for anything
else the locations themselves need to be migrated first, and there
is no way to tell where they would be.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
from a json file
This script can be used directly from poky or oe-core, or can be copied directly
into alayer or any other repository - it is self-suffucient and requires only python3
and git on the host where it will run. It is also copied by the bitbake-layers
layers-setup plugin together with the json, unless requested otherwise.
1. How to restore the layers from the saved configuration:
a) Clone the bootstrap layer or some other repository to obtain the json config and the setup script that can use it.
(use 'bitbake-layers create-layer-setup' from the previous commit to create them)
b) Running with default options:
(note: this will work to update an existing checkout as well)
alex@Zen2:/srv/work/alex/my-build$ meta-alex/setup-layers
Note: not checking out source meta-alex, use --force-bootstraplayer-checkout to override.
Setting up source meta-intel, revision 15.0-hardknott-3.3-310-g0a96edae, branch master
Running 'git init -q /srv/work/alex/my-build/meta-intel'
Running 'git remote remove origin > /dev/null 2>&1; git remote add origin git://git.yoctoproject.org/meta-intel' in /srv/work/alex/my-build/meta-intel
Running 'git fetch -q origin || true' in /srv/work/alex/my-build/meta-intel
Running 'git checkout -q 0a96edae609a3f48befac36af82cf1eed6786b4a' in /srv/work/alex/my-build/meta-intel
Setting up source poky, revision 4.1_M1-372-g55483d28f2, branch akanavin/setup-layers
Running 'git init -q /srv/work/alex/my-build/poky'
Running 'git remote remove origin > /dev/null 2>&1; git remote add origin git://git.yoctoproject.org/poky' in /srv/work/alex/my-build/poky
Running 'git fetch -q origin || true' in /srv/work/alex/my-build/poky
Running 'git remote remove poky-contrib > /dev/null 2>&1; git remote add poky-contrib ssh://git@push.yoctoproject.org/poky-contrib' in /srv/work/alex/my-build/poky
Running 'git fetch -q poky-contrib || true' in /srv/work/alex/my-build/poky
Running 'git checkout -q 11db0390b02acac1324e0f827beb0e2e3d0d1d63' in /srv/work/alex/my-build/poky
2. Command line options:
alex@Zen2:/srv/work/alex/my-build$ meta-alex/setup-layers -h
usage: setup-layers [-h] [--force-bootstraplayer-checkout] [--destdir DESTDIR] [--jsondata JSONDATA]
A self contained python script that fetches all the needed layers and sets them to correct revisions
optional arguments:
-h, --help show this help message and exit
--force-bootstraplayer-checkout
Force the checkout of the layer containing this file (by default it is presumed that as this script is in it, the layer is already in place).
--destdir DESTDIR Where to check out the layers (default is /srv/work/alex/my-build).
--jsondata JSONDATA File containing the layer data in json format (default is /srv/work/alex/my-build/meta-alex/setup-layers.json).
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
specifically that ../../layer.conf exists, and that second-from-last
component in the path is 'templates'.
This requires tweaking template.conf creation in eSDK bbclass, as
we need to ensure that the path in it is valid, and exists
(which may not be the case if the SDK is poky-based).
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This sets the ground for standardizing (and enforcing) the location of
configuration templates: let's start with the default one.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are typically auto-extracted with modify/upgrade from recipes
and can be easily recreated. On the rare occasions where they need
to be reused, they are still available under workspace/attic (which
is already used for old recipes and appends), so nothing gets lost.
This avoids the annoyance of devtool refusing to proceed because
there is a previous source tree in workspace/sources.
For independent source trees behave as before: do nothing.
Adjust the test that previously deleted those trees by hand.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's not possible to set the label (of gpt entry) normally
when I want to use non-listed fstype as a rawcopy.
Example)
part ? --source rawcopy --ondisk mmcblk0 --label mypart --sourceparams file=mypart.raw
To resolve this problem, this patch addes a 'none' fstype
and ignore do_image_label on rawcopy (that actually set the partition label.)
Signed-off-by: JeongBong Seo <jb.seo@lge.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where there isn't a copyright statement, add one to make it explicit.
Also drop editor config lines where they were present and add license
identifiers as MIT if there isn't one.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there is insufficent space to change the interpreter, we were
printing an error here but the overall script did not return an error
code, and thus the SDK installation appeared to succeed - but some of
the binaries will not be in a working state. Allow the relocation to
proceed (so we still get a full list of the failures) but error out at
the end so that the installation is halted.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* easier to find than searching for the highest value in the graph, when the graph is really wide
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
scripts/pybootchartgui/pybootchartgui/draw.py:820: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if (OPTIONS.show_pid or OPTIONS.show_all) and ipid is not 0:
scripts/pybootchartgui/pybootchartgui/draw.py:918: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if i is not 0:
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
* memory pressure is already collected in buildstats, render it as well
when available
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Otherwise, workspace cleanup (removing bogus recipe and source tree)
will not happen, leaving breakage behind.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
There is a coding error in the second invocation of _upgrade_error:
rf is passed into it before it is initialized in the try: block. And so
bogus recipes are left behind in the workspace, causing breakage.
Instead, rewrite the functions to take the recipe directory name in the
workspace layer, which can be calculated in advance.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
For device tree using systems, add support to set a custom devices tree
during UEFI boot. This requires to copy the DTB file to the boot
partition and to add the respective loader entries to the configuration
files.
Both grub and systemd-boot support only loading a specific device tree.
Therefore refuse to work if the 'dtb' parameter contains more than one
entry.
Out of scope for now are overlays (only supported by systemd-boot).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: rebased on commit 98e9d435b278 ("wic/bootimg-efi: use cross objcopy when building unified kernel image")]
|
|
The paths for configuring grub and systemd-boot have some common bits
around copying the initrd files. This will even grow when adding dtb
support. Factor this out into a class function.
Along this, avoid evaluating 'create-unified-kernel-image' multiple
times in do_configure_systemdboot and suppress a bogus warning about
"Ignoring missing initrd" when it is turned on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
"with some default values" isn't clear; if the user wants to change or
inspect the default values and their history, we should help them find
where they are. This becomes especially important when using template
configs other than poky's.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
We can't rely on the host objcopy knowing how to process target binaries,
so use the cross objcopy in the sysroot instead.
Also construct the command argument-by-argument as the format expression
was getting unwieldy.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
We might want to run a cross tool, such as objcopy, in wic. These are
in a TARGET_SYS/ subdirectory under /usr/bin, so add that directory to
the search path too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the workspace bbappends are still using the old override syntax
with EXTERNALSRC_pn-*, externalsrc_re will not match, and pn will never
be assigned, leading to a nondescript UnboundLocalError being raised on
the user's terminal. Try to detect that situation and give the user a
hint how to solve it.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix "NameError: name 'orig_path' is not defined".
It's a typo from when this error was handled outside this function.
Signed-off-by: Mihai Lindner <mihai.lindner@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If devtool finish needs to create a patch and have it applied to the
sources for a recipe where S points to a subdirectory of the sources,
then the patch needs to be applied at the root of the repo i.e. we need
to add a patchdir= parameter to the SRC_URI entry.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If (perhaps foolishly) at your configuration level you have e.g.
SRC_URI_append_pn-recipename = " file://patchname.patch"
and then run devtool modify on a different recipe, an error occurs:
INFO: SRC_URI contains some conditional appends/prepends - will create branches to represent these
...
ERROR: [Errno 2] No such file or directory: '/path/to/downloads/patchname.patch'
pn- overrides would not constitute an alternative configuration that we
should handle in this context, so just ignore them to avoid the issue.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marius Kriegerowski <marius.kriegerowski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Substitute expressions or whitespace from python egg requires.txt when
generating PACKAGECONFIG
Pysetuptools sees the uvicorn.egg-info/requires.txt as extra requirements.
Recipetool parses this information to generate the PACKAGECONFIG.
These extra requirements contain expressions and whitespace, which are not allowed in PACKGAGECONFIG.
This patch substitute them by hyphens to make PACKAGECONFIG parsable and readable.
Also adding an oe-selftest for this.
[YOCTO #14446]
Signed-off-by: Thomas Roos <throos@amazon.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add two new, separate charts showing the avg10 and delta
total pressure over time for the CPU and IO resources. The height of
the avg10 data in each chart represents the percentage of time "some"
task was delayed over the specific resource during the last 10
seconds of the build. The height of the delta total data in each chart
represents the total time "some" task was delayed since the last sample
was collected. If the reduced_proc_pressure data is not present in the
buildstats log, then the new charts are not shown at all rather than
being present but unpopulated.
Note that the delta total graphs may appear "spikey",
oscillating from high values to low. This behaviour is fixed in a
subsequent commit.
Signed-off-by: Aryaman Gupta <aryaman.gupta@windriver.com>
Signed-off-by: Randy MacLeod <randy.macleod@windriver.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* add missing % to print the values instead of:
| INFO: Build artifacts not found, exiting.
| INFO: (Please check that the build artifacts for the machine
| INFO: selected in local.conf actually exist and that they
| INFO: are the correct artifacts for the image (.wks file)).
|
| ERROR: ("The artifact that couldn't be found was %s:\n %s", 'kernel-dir', '/OE/build/deploy/images/qemux86-64')
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu auto generating the KERNEL_CMDLINE values and specifying using
-append option to qemu boot command which will lead to override the
kernel_cmdline/bootargs which are specified in DTB when using -dtb option.
Add new macro QB_KERNEL_CMDLINE to specify not to add the runqemu
generated KERNEL_CMDLINE values instead use which are in the DTB if
value defined as 'none'.
Add provision to override bootargs using # runqemu bootparams="root=/dev/ram0"
Signed-off-by: Raju Kumar Pothuraju <raju.kumar-pothuraju@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when devtool finish, the _copy_file() failed.
--------------------------------------------
TypeError: _copy_file() got an unexpected keyword argument
'base_outdir'
--------------------------------------------
Fixes: 05f2d5d2ce00 ("devtool: finish: add dry-run option")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow wic to also manipulate the rootfs entry in fstab, which it
currently refuses to write. Reasons one might want to do that include
using systemd-growfs via --fsoptions on /
With this change / is now handled exactly the same as other
mountpoints, the former exception seemingly was not even documented.
Signed-off-by: Tobias Schmidl <tobiasschmidl@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The .dot file created by `bitbake -g` changed formats a while ago, which
broke oe-depends-dot.
Also add some useful examples to the --help output.
Signed-off-by: Rusty Howell <rustyhowell@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sort dict keys in the json output and use tab spacing. This means
when commited into git, the diffs are human readable but it is more
compact filesize than space indentation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Save commit data when writing to the json file so the results can
be copared/extended later.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The `fspassno` parameter allows to overwrite the value of the last
column (`fs_passno`) in the /etc/fstab of the target root file system.
This allows to have periodic file system checks.
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Vijai Kumar K <Vijaikumar_Kanagarajan@mentor.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a minor typo and replace "partion" with "partition".
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|