| Age | Commit message (Collapse) | Author |
|---|
|
Use the partition label option, when available, to label the filesystem.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
btrfs emtpy partition creation is currently not working because of the
usage of the non existant variables rootfs ans extra_imagecmd. It also
as an incorrect size.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Introduce a new option --overhead-factor to replace
IMAGE_OVERHEAD_FACTOR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Introduce a new option --extra-space instead of using IMAGE_EXTRA_SPACE.
This is useful for boot partitions where the extra space is often
useless or for huge partition where 10MiB may not be enough.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For some architectures it is necessary to reserve space on disk without
it being present in the partition table.
For example, u-boot on i.mx is placed at an offset of 1kB on the sdcard.
While it would be possible to create a partition at that offset and
place u-boot there, it would then be necessary to update the default
u-boot environment to use partition 2 on the mmc instead of partition 1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When printing a partition, the --align parameter was shown when present
but not its value.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Kickstart file errors are not emitted by the parser. In case errors, the
current code will continue to execute possibly creating a faulty or
incomplete image. The patch enables the parser to emit all encountered
errors. The error message is shown for the user and further execution is
ceased.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To support yocto on systems with python3 as default version, scripts
should use /usr/bin/env python in the shebang, as this allows the use of
a fake env to mimic python2 as default version.
This patch simply replaces occurrences of #!/usr/bin/python with
#!/usr/bin/env python and was done with this oneliner:
git grep -lE '^#!/usr/bin/python' | xargs \
sed -i 's|/usr/bin/python|/usr/bin/env python|'
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating partitions sized to given rootfs directories, filesystem
creation could fail in cases where the calculated target partition
size was too small to contain the filesystem created using mkfs. This
occurred in particular when creating partitions to contain very large
filesystems such as those containing sdk image artifacts.
This same limition is present in the oe-core image creation classes,
which can be readily see by changing IMAGE_OVERHEAD_FACTOR from the
default 1.3 to 1.0 and building a sato-sdk image.
It should be possible to calculate required sizes exactly given the
source rootfs and target filesystem types, but for now, to address the
specific problem users are hitting in such situations, we'll just do
exactly what oe-core does and define and use an IMAGE_OVERHEAD_FACTOR
or 1.3 in those cases.
Fixes [YOCTO #6863].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The return code from the mkfs command used by the partition creation
command was being ignored, allowing it to silently fail and leaving
users mystified as to why the resulting filesystem was corrupted.
This became obvious when failures occurred when creating large
e.g. sdk filesystems [YOCTO #6863].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
VFAT rootfs partitions sector count would get updated always even if
there is no need. Since parition size in wic is expressed in MB, any
sub MB change will cause the generated partition image to be larger
than allocated space within the disk image. Fortunately, partitions
sized in MB will most of the time have a proper sector count.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Functions for generating rootfs use IMAGE_EXTRA_SPACE rather than
BOOTDD_EXTRA_SPACE. The latter is used in boot image source plugins.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update comment about types of generated partition images.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not including the label image but having multiple partitions of the same
type, the image file of one partition would overwrite the other.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add code to parse the sourceparams and pass them to the partition
plugin methods.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The sourceparam param allows source plugins to be parameterized
generically (via --sourceparams="key=val[,key=val], implemented
previously).
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To go along with '--source' as a way to parameterize source plugins.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As well as any other stray instances of mic in the codebase that can
be removed.
We don't really need to carry around legacy naming, and the history is
in git.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
Alexandre Belloni
Maciej Borzecki
Martin Hundebøll
Tom Zanussi