| Age | Commit message (Collapse) | Author |
|---|
|
With the recent kernel staging changes, STAGING_KERNEL_DIR no longer
points to the kernel image, which can be found however in
DEPLOY_DIR_IMAGE. This updates find_artifacts() to look there
instead.
Fixes [YOCTO #7307].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Introduce a new option --overhead-factor to replace
IMAGE_OVERHEAD_FACTOR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Introduce a new option --extra-space instead of using IMAGE_EXTRA_SPACE.
This is useful for boot partitions where the extra space is often
useless or for huge partition where 10MiB may not be enough.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For some architectures it is necessary to reserve space on disk without
it being present in the partition table.
For example, u-boot on i.mx is placed at an offset of 1kB on the sdcard.
While it would be possible to create a partition at that offset and
place u-boot there, it would then be necessary to update the default
u-boot environment to use partition 2 on the mmc instead of partition 1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The first iterations of wic very shortsightedly catered to two
specific use-cases and added special-purpose params for those cases so
that they could be directly given their corresponding boot artifacts.
(hdddir and staging_data_dir).
As more use-cases are added, it becomes rather obvious that such a
scheme doens't scale, and additionally causes confusion for plugin
writers.
This removes those special cases and states explicitly in the help
text that plugins are responsible for locating their own boot
artifacts.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 7ce1dc13f91df70e8a2f420e7c3eba51cbc4bd48.
This patch broke the assumption that a non-null boot_dir means a
user-assigned (-b command-line param) value.
Reverting doesn't break anything, since the case it was added for
doesn't use the boot_dir for anything except debugging anyhow.
Fixes [YOCTO #6290]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The --debug option is missing from the wic help text; this adds it and
at the same time rearranges the usage into a more logical arrangement.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add kickstart for generating a SD card image that should cover most use
case scenarios. The layout is as follows:
- 16MB vfat partition that IMAGE_BOOT_FILES will be copied to, 4k
alignment
- ext4 rootfs, 4k alignment
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running wic with -e to use artifacts from a named image, bootimg_dir was
always passed as empty string to partition source plugins. The patch
sets bootimg_dir to current value of DEPLOY_DIR_IMAGE, as bootloader
artifacts end up in that location as well.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bootimg-efi plugin now requires a loader param, so supply it to
retain existing behavior.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As well as any other stray instances of mic in the codebase that can
be removed.
We don't really need to carry around legacy naming, and the history is
in git.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Also fix up users such as imager functions.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Remove help text regarding the source and future intentions of the wic
codebase, since the code prompting those comments has now been mostly
removed.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
This is a set of miscellaneous help text updates noticed while
transcribing wic help for the dev manual.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
squashfs support was recently added to wic, so document it.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
--fsoptions support was recently added to wic, so document it.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix various typoes and grammar problems noticed while transcribing for
the dev manual.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The bootimg-efi plugin specifies the fstype internally, so remove it
from the partition definition.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previous patches added help for 'wic kickstart' but forgot to add an
entry in the main help page showing its availability. Add an entry
for it.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a 'wic kickstart' help section to make it easy for users to access
the kickstart reference without having to go to an external website.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a general overview of wic to the help system as 'wic overview',
along with some introductory examples.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a category for help topics with an initial help topic discussing
source plugins.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add both short and long text for the new 'wic list source-plugins'
command.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a 'wic list source-plugins' command enabling users to get a list
of valid partition --sources. This is useful not only for determining
sources to use in .wks partition statements, but also for making sense
of errors in .wks partition processing.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If wic is running as raw mode, it's better to check if BBLAYERS
is valid before inspect it.
No functional changes.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
.wks file are looked in 'scripts/lib/image/canned-wks' directory on all
BBLAYERS variable returned by bitbake environment. If found, it will
be used.
The user could create your own .wks and keep it inside its layers. For
now the path must be <layer-dir>/scripts/lib/image/canned-wks.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Move find_bitbake_env_line() since they're going to need to be
accessible from source plugins.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake_env_command will choke if it isn't given an image, make sure
it does the right thing in that case.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hook up the existing --debug option to toggle the wic debug loglevel,
which is indispensible when things go wrong, and make it easy to use
from the command-line.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove all the Wic_PartData and DirectImageCreator code now
implemented by the BootimgEFIPlugin and BootimgPcbiosPlugin plugins,
as well as all the special-cased boot_type code, significantly
cleaning up the code.
Replace the calling code with general-purpose plugin invocations, in
essence calling the appropriate implementations at run-time based on
the --source value in effect.
Change the directdisk.wks and mkefidisk.wks scripts to make use of the
new plugins.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add get_bitbake_var() and bitbake_env_lines() functions for use by
plugins, which will need access to them for customization.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move a couple items into a more common location since they're going to
need to be accessible from source plugins.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If one of these isn't found, it won't be initialized and will throw an
UnboundLocalError.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reuses the mic/livecd infrastructure but heavily subclasses and
modifies it to adapt to the special needs of building images from
existing OpenEmbedded build artifacts.
In addition to the OE-specific mic objects and modifications to the
underlying infrastructure, this adds a mechanism to allow OE kickstart
files to be 'canned' and made available to users via the 'wic list
images' command.
Two initial OE kickstart files have been added as canned .wks files:
directdisk, which implements the same thing as the images created by
directdisk.bbclass, and mkefidisk, which can essentially be used as a
replacement for mkefidisk.sh. Of course, since creation of these
images are now driven by .wks files rather than being hard-coded into
class files or scripts, they can be easily modified to generate
different variations on those images. They also don't require root
priveleges, since they don't use mount to create the images. They
don't however write to media like mkefidisk.sh does, but rather create
images that can be written onto media.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Initial implementation of the 'wic' command.
The 'wic' command generates partitioned images from existing
OpenEmbedded build artifacts. Image generation is driven by
partitioning commands contained in an 'Openembedded kickstart' (.wks)
file specified either directly on the command-line or as one of a
selection of canned .wks files (see 'wic list images'). When applied
to a given set of build artifacts, the result is an image or set of
images that can be directly written onto media and used on a
particular system.
'wic' is based loosely on the 'mic' (Meego Image Creator) framework,
but heavily modified to make direct use of OpenEmbedded build
artifacts instead of package installation and configuration, things
already incorporated int the OE artifacts.
The name 'wic' comes from 'oeic' with the 'oe' diphthong promoted to
the letter 'w', because 'oeic' is impossible to remember or pronounce.
This covers the mechanics of invoking and providing help for the
command and sub-commands; it contains hooks for future commits to
connect with the actual functionality, once implemented.
Help is integrated into the 'wic' command - see that for details on
usage.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Tom Zanussi
Alexandre Belloni
Maciej Borzecki
João Henrique Ferreira de Freitas