| Age | Commit message (Collapse) | Author |
|---|
|
uninative.bbclass uses -xjf for decompression so actually run the data
through bzip2.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To add some flexibility to setting up the paths for the toolchain,
add some parameters. This initial use will be in order to point at
the buildsystem toolchain copied in by copy_buildsystem.py.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added the helper functions necessary to copy the sstate from the
current build, and generate the file to "lock" it.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This file provides a way to take bitbake and the layers in the
current build and copy them to a target specified.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
other DISTRO values
If you create a build directory with poky, or set DISTRO to "poky" and
run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to
6. If you then set DISTRO to any other value where the new distro config
doesn't pull in poky's config, e.g. "nodistro", you would then get a
bblayers.conf version error which didn't immediately make sense. (The
layer versions have been out-of-step ever since meta-yocto-bsp was
split out of meta-yocto several years ago).
This is just painful and we'd rather users didn't have to deal with
it. Obviously it isn't an OE-Core problem per se, but a simple way to
resolve it for everyone is to bump OE-Core's version to 6 with an
automatic no-op upgrade. Also ensure that multiple upgrade functions
(such as the poky one) have a chance to execute by not breaking out of
the loop as we were before.
Fixes [YOCTO #6139].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit b003df03358aea4e9e094ee339a9f6796866961e.
We keep seeing parallel make failures on the autobuilder
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 0a69248db774f169318fc5954c805f0a7e8803dc.
The update causes QA failures on the autobuilder.
|
|
This reverts commit 7502fa5febdd7a2281d626f7040782fb1f9af59e.
We keep seeing parallel make failures in openssl :(
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On older versions of Python, sysconfig read the Makefile and Python.h, generated at build time
now it uses _sysconfigdata which contains information about the HOST, erroneous in our case,
this causes an error when bulding something using distutils since it obtains compiler information and such.
Also fixes configuration of _ctypes/libffi
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
|
|
- Based on Paul Eggletons work to partially upgrade to Python 2.7.6
Modified:
default-versions.inc: switched to python 2.7.9
generate-manifest-2.7.py: fixed _sysconfigdata
python-2.7-manifest.inc: fixed _sysconfigdata
python.inc: Updated checksums and source, no LICENSE
change just updated some dates
python-native_2.7.3 -> python-native_2.7.9 and updated patches
python_2.7.3 -> python_2.7.9, and added ac_cv_file__dev_ptmx=no
ac_cv_file__dev_ptc=no in EXTRA_OECONF to solve python
issue #3754, only needed when cross compiling, also updated patches
use_sysroot_ncurses_instead_of_host.patch: New patch to use ncursesw
from sysroot instead of hosts, introduced by fix for python issue #15268
Rebased:
01-use-proper-tools-for-cross-build.patch
03-fix-tkinter-detection.patch
05-enable-ctypes-cross-build.patch
06-avoid_usr_lib_termcap_path_in_linking.patch
avoid_warning_about_tkinter.patch
builddir.patch
fix_for_using_different_libdir.patch
host_include_contamination.patch
multilib.patch
nohostlibs.patch
search_db_h_in_inc_dirs_and_avoid_warning.patch
Deleted (fixed on upstream):
06-ctypes-libffi-fix-configure.patch
CVE-2013-4073_py27.patch
gcc-4.8-fix-configure-Wformat.patch
json-flaw-fix.patch
posix_close.patch
pypirc-secure.patch
python-2.7.3-CVE-2012-2135.patch
python-2.7.3-CVE-2013-1752-smtplib-fix.patch
python-2.7.3-CVE-2014-1912.patch
python-2.7.3-CVE-2014-7185.patch
python-2.7.3-berkeley-db-5.3.patch
python-fix-build-error-with-Readline-6.3.patch
remove-BOM-insection-code.patch
remove_sqlite_rpath.patch
python2.7.3-nossl3.patch
[YOCTO #7059]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
|
|
Because we move the workdir when extracting source, then move the source
and delete the temporary workdir, you lose the indirection symlink
pointed to by the alternates file (which is created when the fetcher
clones it from DL_DIR with -s) and the resulting repository is broken.
In any case, for a source repo that the user may put their own changes
into, we can't really rely on a clone made with -s in case the
original goes away - because of cleanall, DL_DIR disappearing, etc. So
repack the repository so that it is a complete, non-shared clone after
unpacking.
(While I'm at it, add a test for devtool modify with a git recipe which
verifies that this works.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When updating git-based recipes, in a lot of cases what you want is to
push the changes to the repository and update SRCREV rather than to
apply patches within the recipe. Updating SRCREV is now the default
behaviour for recipes that fetch from git, but this can be overridden
in both directions using a new -m/--mode option.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Ensure it knows where to put SRCREV and S
* Handle prepend/append and functions in general
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you want to be able to make use of libraries in conjunction with
devtool then we need to install them into the sysroot for other recipes
to use. Make it a configuration option in case it needs to be changed at
runtime.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you've added a new recipe, you want the output cleaned when you do
devtool reset, otherwise cruft from building the recipe may remain which
could interfere with future builds.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add do_shared_workdir which was added recently
* Add do_fetch and do_unpack to this list, because at the moment if you
enable externalsrc through a bbappend the += in this class wipes out
the original value from externalsrc (which is set with ?=)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure there's no chance of anyone forgetting they have a recipe set
up for externalsrc; otherwise you could get confused about what is going
on. (With our default logging setup we can't make it a note because the
UI doesn't forward those; otherwise I would have used bb.note().)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Here we set SRC_URI to blank, however doing so means that the function
that is called when you expand the default value of SRCPV
(i.e. bb.fetch2.get_srcrev()) will fail, so any recipe that references
SRCPV in PV couldn't previously be used with externalsrc.
(At some point we may fix the function to work in the externalsrc case,
but then we would also need to ensure that ${B} did not change as a
result of PV changing any time the HEAD revision changes in the external
source tree, or you'll lose any intermediate build artifacts.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kernel.bbclass adds ${S} do do_clean[cleandirs], but this means if you
run bitbake -c clean <kernelrecipe> then your external source tree will
be trashed, which could be a disaster. For safety, remove ${S} from
cleandirs for every task. We also have to do the same for ${B} in the
case where EXTERNALSRC_BUILD is set to the same value as EXTERNALSRC.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For recipes that have their actual source in a subdirectory of what is
fetched (e.g. mkelfimage), we need to find the root of the repository
within the GitApplyTree code that attempts to set up the required git
hooks and use that, rather than expecting the root to be the same as
${S}.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes:
- BlueZ 5 native HSP (headset) support;
- BlueZ 5 HFP (hands-free) profile support via oFono;
- systemd socket activation support;
- Better support for multichannel and 2.1 profiles;
- Remap optimisations;
- Many minor improvements, bug fixes, and i18n updates.
- Switched to ${BP} variable.
- Patch 0001-configure.ac-Check-only-for-libsystemd-not-libsystem.patch
removed, no longer necessary.
- Patch CVE-2014-3970.patch included upstrem, removed.
- Slightly changed copyright notice, only a clarification.
libsamplerate based resamplers are now deprecated,
because they offer no particular advantage over speex.
Dependency to libsamplerate0 dropped.
[ RB: disable systemd until systemd.bbclass can handle user units ]
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There is no good reason not to use ext4 at this point, it has advantages
and few drawbacks. Therefore switch the qemu machines over (and the default
runqemu script options).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a variable that allows us to map the OE-Core layer to the name that
represents it in the OpenEmbedded layer index. This will be used by
bitbake-layers layerindex-fetch so that it knows that for example
OE-Core is already fetched and included in the current configuration.
Note - it won't be required for us to go around and set this for every
layer - we can do the matching based on repo and subdirectory, but
OE-Core is somewhat special in that it does sometimes appear in
different places, for example in poky.
[YOCTO #5348]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add BBLAYERS_LAYERINDEX_URL variable that bitbake-layers can use to find layer index.
Add BBLAYERS_FETCH_DIR variable that bitbake-layers can use to specify fetch directory.
[YOCTO #5348]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake-layers subcommands with underscores are the old syntax; the
dashed form has been supported (and displayed in the help text) for
quite a while now, and the old syntax is about to be unsupported, so use
the dashed form in the tests.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now can support musl along with uclibc and glibc
earlier when only alternative was uclibc this check was fine
but now we need to consider non-glibc vs glibc case instead of
uclibc vs glibc
Change-Id: Id794ce193c6557b5435002a8f9b6eb608738b696
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Lets try to use musl version of libintl and see how far we get
Change-Id: I0259049eb6461ab9b579c7f3ad401fefede24621
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
lttng-tools-2.6.0: lttng-tools-ptest rdepends on libkmod, but it isn't a build dependency? [build-deps]
lttng-tools-2.6.0: lttng-tools rdepends on libkmod, but it isn't a build dependency? [build-deps]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch can't be applied by "git am -3" with newer version of git
(such as 2.0.1), and can't be applied by "git am/apply" with any
version, now fix it
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Profiling a core-image-sato-sdk rootfs, we're spending over 40s
compiling the same regex over and over again, roughly around 5 million
times.
This is suboptimal, fix for a 40s improvement on a 18.5minute task execution
time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
See the patch description, this adds a tweak to an algorithm to improve
core-image-sato-sdk mkfs time from over 8 minutes to about 35s.
Needs discussion upstream but seems reasonable for our uses of it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* each DEFAULTTUNE with thumb enabled should list it's arm variants in
PACKAGE_EXTRA_ARCHS, otherwise packages which force arm ISA won't be
found in do_rootfs
* armv7athf-neon-vfpv4 was missing its own PACKAGE_ARCH and also the arm
variant
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* this means that recipes with ARM_INSTRUCTION_SET explicitly changed
to arm will be built in feed without thumb suffix, the same does apply
for workdir, e.g. after "bitbake glib-2.0" you can see:
tmp-glibc/work/armv5e-oe-linux-gnueabi:
glib-2.0 glibc glibc-initial
tmp-glibc/work/armv5te-oe-linux-gnueabi:
acl db gdk-pixbuf kmod ....
and
tmp-glibc/deploy/ipk:
all armv5e armv5te qemuarm
* feed config should be ok, because all default DEFAULTTUNEs always
include "arm" variants of all supported PACKAGE_ARCHs
* for more details see
http://lists.openembedded.org/pipermail/openembedded-core/2014-April/091960.html
the toolchain path issues were resolved in 1.8
* add ARM_INSTRUCTION_SET = "arm" to glibc-collateral.inc and comment in
glibc.inc to fix glibc-locale and glibc-scripts build
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* refresh/cleanup the patch to apply cleanly on 2.0.9
* get rid of configure - it's autogenerated
* configure.ac: use aarch64* wildcard
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The xorg font builds use `pkg-config --variable=mapdir fontutil` to
locate encoding maps. This variable ought to be sysroot-relative, but
neither pkg-config nor font-util nor the fonts themselves provide any
facility to add the sysroot back in.
We're presently adding the sysroot by by twiddling MAPFILES_PATH in
configure.ac. This is broken; it's actually defined in aclocal.m4,
because the definition is provided by fontutil.m4. Another (more
speculative) criticism is that it also hardcodes a build-specific
absolute path into builds which might (incorrectly) encode it into
target-installable packages.
A somewhat more robust, focused, and clear solution is to override
UTIL_DIR on the make command line. (UTIL_DIR, not MAPFILES_PATH, is what
is actually referenced in the build.)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
MAPFILES_PATH is a configuration variable that is used by packages using
font-util, which tells those packages how to compute it in fontutil.m4.
Presently, we're manually twiddling things so that MAPFILES_PATH will
consult the native sysroot, when building under *any* architecture.
This complicates building other packages immensely, and also generates
broken on-target packages, because the contents of font-util-dev will
reference the native sysroot on the build machine (!).
We don't even need to twiddle MAPFILES_PATH anymore so just delete it.
This code also had a path bug (referencing /usr/lib/pkg-config instead
of /usr/lib/pkgconfig) which is also fixed by deletion.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
font-util installs encoding maps into /usr/share/fonts/X11. This path
may not exist on the host (many distros install these into
/usr/share/fonts/util) so they must exist in the sysroot in order for
e.g. `pkg-config --variable=mapdir fontutil` to work correctly. However,
currently /usr/share/fonts is explicitly not installed into sysroots, so
the encoding maps were not getting found.
Fix this by explicitly staging ${datadir}/fonts/ into the sysroot.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
SYSTEMD_SERVICE doesn't need to be set conditionally, and units should be
installed if the systemd DISTRO_FEATURE is enabled, not if sysvinit isn't
enabled.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This reverts commit 0b891265716c414ade29d587fc1a3c4ea7beadbe.
U-Boot does support AArch64, this however was only added to newer
versions of U-Boot and at the time of this original commit the U-Boot in
OE-Core did not support the 'arm64' architecture. OE-Core now has a
newer version of U-Boot for the mkimage recipe and thus supports the
'arm64' architecture.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed the patch since upstream has fixed it:
0001-test-ippserver.c-check-avahi-before-use.patch
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
quilt-0.63.inc -> quilt.inc: we don't have multiple quilt-xxx.inc, so
use quilt.inc rather than quilt-0.63.inc.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update to version 2.5.3 to match trace-cmd.
Changes include:
- Remove kernelshark-fix-syntax-error-of-shell.patch (the syntax error
is no longer present in the new version).
- Specify bindir_relative and libdir in EXTRA_OEMAKE as in the
trace-cmd recipe so files get installed to the right place.
Additionally, remove unnecessary EXTRA_OEMAKE options.
- Fix up the do_install steps to remove the plugins directory; that
directory now lives under /usr/lib.
- Set NO_PYTHON=1 because building the ctracecmd Python module requires
swig, which is not available in oe-core.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating adds new features including the very useful 'profile' option.
Changes include:
- Remove addldflags.patch (already upstream in the new version).
- Remove make-docs-optional.patch (docs are built in a separate target
in the new version).
- Update SRC_URI, SRCREV, PR, and PV in the .inc file and don't
override them in the recipe.
- Fix a typo in LIC_FILES_CHECKSUM so 'endline' is properly defined.
- Drop PR.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 3.19 kernel introduces this error, ignore it for now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Randy Witt
Paul Eggleton
Richard Purdie
Alejandro Hernandez
Cristian Iorga
Chong Lu
Khem Raj
Robert Yang
Martin Jansa
Fathi Boudra
Richard Tollerton
Ben Shelton
Ross Burton
Nathan Rossi