| Age | Commit message (Collapse) | Author |
|---|
|
Where recipes use S = ${WORKDIR}, change them to set UNPACKDIR to
a subdir of WORKDIR and make S point at this instead.
I've chosen not to force S into any standard UNPACKDIR we may pick in
future just so the S = UNPACKDIR case is clearly visible by the
directory naming under WORKDIR as that should aid usability.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where recipes use S = ${WORKDIR}, ensure they are referencing ${S} correctly
to access files as soon we want to stop doing this in WORKDIR at which point
they would break unless corrected.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wrap calls to start_getty with ttyrun, so that getty isn't started if
the device doesn't exist. As we know start_getty is only called when
the device exists we can remove the partial workaround for this problem
in that scripts too.
This neatly obsoletes SERIAL_CONSOLES_CHECK, whose sole purpose was to
check what terminals are present at boot and rewrite inittab. Notably,
this meant that SERIAL_CONSOLES_CHECK made using a read-only rootfs
impossible.
(From OE-Core rev: f4fd17d5a5e4eaa31995d3ca52c871cfbdc0df68)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of one-letter variables and arcane sed expressions, use English
words and 'cut'.
(From OE-Core rev: de9833792dd0cfac6f17d5c733c263b976e89cf6)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've been removing PR values from recipes at upgrade time for a while. In general
anyone maintaining a binary distro would end up having to curate these themselves
so the values in OE-Core aren't really that useful anymore. In many ways it makes
sense to clear out the remaining ones (which are mostly for 'config' recipes that
are unlikely to increase in PV) and leave a clean slate for anyone implementing
a binary distro config.
References are left in meta-selftest since the tests there do involve them and
their removal upon upgrade.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
license identifiers
An automated conversion using scripts/contrib/convert-spdx-licenses.py to
convert to use the standard SPDX license identifiers. Two recipes in meta-selftest
were not converted as they're that way specifically for testing. A change in
linux-firmware was also skipped and may need a more manual tweak.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of automated script conversion:
scripts/contrib/convert-overrides.py <oe-core directory>
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit ed69ef20167da0986bc9363d1a91e62001995af4.
The console entry has already been added into /etc/inittab based
on the SERIAL_CONSOLES. So drop this redundant entry.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The licenses were renamed to match their SPDX names, fix the
references in LIC_FILES_CHKSUM in OE-Core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when both installed, do_rootfs report error like:
file /etc/inittab conflicts between attempted installs of
busybox-inittab-1.30.1-r0.qemux86 and sysvinit-inittab-2.88dsf-r10.qemux86
so add each other to rconflicts
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Busybox' getty has code to try to make itself a session leader,
whereas util-linux' agetty doesn't. It expects this to happen
from outside.
When getty is not a session leader, many things don't work on
the serial console, e.g. setting the terminal process group,
job control doesn't work, etc.
Executing image tests also fails with AssertionErrors, because
Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot get controlling tty: Operation not permitted
Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot set process group: Inappropriate ioctl for device
Update the start_getty script to invoke getty via the setsid
utility if needed, i.e. if /sbin/getty is not busybox getty.
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead, first check if we need to do anything at all during first boot,
and if so, either postpone to first boot via pkg_postinst_ontarget()
when running on host, or run the necessary setup code when running on target.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getty devices were not being removed in some cases because device name
was not at the end of the line, for example a ttyS1 device:
S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102
Removing this limitation allows sed to remove any line containing
the device.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes more sense than the default TERM=linux (as set
by the linux kernel).
In addition, when using busybox init, it tries to achieve
the same (in a different way).
Both agetty, and busybox getty support the terminal type as
the last argument.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
[ YOCTO #9529 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When this file is in ${sysconfdir}/init.d, SELinux labels it as a generic
init script (initrc_t). This causes problms at runtime because SELinux
doesn't let the login process execute generic init script. Moving this
helper script to base_bindir results in it being labeled as a generic
binary (bin_t). Nearly every SELinux domain is allowed to execute
generic binaries and the login process is one of them.
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a wrapper script around getty to check if a given console exists, this
allows for multiple Console ttys to be specified for various boards without
having additional BSP types just for different console types.
[YOCTO #8689]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0.
Since that doesn't have tty in the name, a correct label didn't get
added to inittab.
This change makes both names with tty and without work.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When switch to runlevel 1 (Single user mode), tty was not
re-spawn and appears to be a machine hang.
[YOCTO #5336]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
Signed-off-by: Petter Mabäcker <petter@technux.se>
|
|
This aligns the params of getty with the ones used in Debian. From the
getty(8) manpage:
,----[ getty(8) manpage ]
| -L, --local-line
|
| Force the line to be a local line with no need for carrier
| detect. This can be useful when you have a locally attached
| terminal where the serial line does not set the carrier detect
| signal.
`----
Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replace:
cat <file> | grep xxx
By:
grep xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We already handle SERIAL_CONSOLES here and this is now set from
SERIAL_CONSOLE if not already set.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The label field in /etc/inittab entries needs to be unique, and the
numeric label being used for the SERIAL_CONSOLES getty entries was
clashing with the entries added for standard ttyX entries added via
SYSVINIT_ENABLED_GETTYS. Use the part after "tty" in the device name
(which is what the comment further down explicitly says should be done)
as the label rather than a simple incrementing number.
Fixes [YOCTO #4374].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The kernel boot process hangs when /proc/consoles doesn't exists, therefore
check the existence of /proc/consoles before executing pkg_postinst script.
Following is the log when /proc/consoles doesn't exist:
Running postinst /etc/rpm-postinsts/102...
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
done.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
INIT: no more processes left in this runlevel
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
to check
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if
you need to check for the presence of the serial consoles you can also define
SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This
will prevent error message that pop up when the serial port is not present.
SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1 115200;ttyEHV0"
SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
The above lines in machine.conf or elsewhere will have the effect of having
two serial consoles and removing any that are not present at boot
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
WARNING: .../sysvinit-inittab-2.88dsf-r6/sysvinit-2.88dsf/COPYING could
not be copied for some reason. It may not exist. WARN for now.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just define additional serial consoles like so:
SERIAL_CONSOLES="115200;ttyS0 115200;ttyS1 ... 115200;ttySN"
Also be sure to remove SERIAL_CONSOLE (lacking the S) from your
machine as they can conflict.
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
configuration file
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implements the improvements suggested in the original fix for [YOCTO #1131]
Signed-off-by: <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Ross Burton
Kevin Hao
Khem Raj
Changqing Li
André Draszik
Alexander Kanavin
Leonardo Sandoval
André Draszik
California Sullivan
Stephano Cetola
Philip Tricca
Saul Wold
Randy Witt
Aníbal Limón
Petter Mabäcker
Otavio Salvador
Matthieu Crapet
Martin Jansa
Paul Eggleton
Muhammad Shakeel
Zhenhua Luo
Matthew McClintock
Lianhao Lu
Koen Kooi