| Age | Commit message (Collapse) | Author |
|---|
|
As glibc 2.27 can't read older locale-archives, SDKs using glibc 2.27 on hosts
using glibc earlier than 2.27 won't be able to find any locales, so bitbake
won't start and Python can't use UTF-8.
So by default install all locales into the SDK. Special-case Extensible SDKs by
installing no locales as they ship glibc in a buildtools, and that will have the
locales.
Locale installation requires cross-localedef, so add that to DEPENDS.
Also remove the explicit en_US addition in buildtools-tarball as it is now
redundant.
(From OE-Core rev: 96896568d197cd06302713c24c0f7d91bfaea6c1)
(From OE-Core rev: 8327d50ef66c94592d76b42e147011daafc6a7c3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently systemd-boot actually incorporates libgcc, since the
systemd-boot needs to be built with 64bit instructions it can not
use the x32 based libgcc.
Use the new override to ensure it gets overriden, linux-gnux32 could
not be used because x86-64 has higher priority.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the meta-go-toolchain. It enables the generation of a Go
toolchain allowing for cross compiling for target architecture.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
DISTRO_VERSION may contain the current date, and so is prone to mismatches
particularly when keys are created on one date, and dnf is configured to use the keys
on another date.
[YOCTO #11983]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added sfdisk, e2fsck, mkswap, resize2fs, mkdosfs to the
list of used tools in Disk class. They're going to be used
in 'wic write' implementation.
Added dependency to util-linux to wic-tools to ensure that
sfdisk and mkswap are available from wic-tools native sysroot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In particular, do_unpack needs to be deleted as it was causing missing
subpackages. Do_unpack cleans the builddir and if it was run after
do_get_public_keys it cleaned up all keys causing no packages to be
built.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added e2fsprogs-native to the list of dependencies for wic-tools
as all fs-related utilities have to be in this list.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are redundant since nopackages are being inherited.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are redundant since nopackages are being inherited.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop deltask do_package* syntax, inheriting nopackages instead.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic will attempt to use pseudo from the wic-tools sysroot to run, but it
was only sure to be in there if do_install had executed - which is not
the case if it had been restored from sstate, in which case it failed
horribly as seen when running the wic.Wic.test_fs_types and
test_mkfs_extraopts tests on the Yocto Project autobuilder recently. Add
an explicit dependency on pseudo-native to ensure it's always there.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic-tools.env was uses only when wic is run from bitbake.
As wic doesn't use wic-tools anymore in this mode there is
no need for this file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The results of meta-ide-support are used by utilities like runqemu and
runqemu-extract-sdk. Since the usr/bin that meta-ide-support creates is
subsequently removed bu rm_work, we exclude this recipe from the rm_work
list.
[YOCTO #11119]
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added btrfs-tools-native and squashfs-tools-native to DEPENDS as
wic uses these tools to support btrfs and squashfs filesystems.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
The windres binutils binary which is used for Windows resource files
requires utf-16 and cp1252 encoding support in order to correctly
generate resource files with strings. As such when using uninative to
build mingw resources for a nativesdk target the windres binary is
executed on the native host, thus using the uninative libc and gconv
modules.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_locked_sigs() uses ${D} to hold a file as input to the sstate staging code.
Generally this isn't a problem as it happens after packaging, but sometimes (if
the recipe is rebuild, perhaps) do_package() will see the file inside ${D} and
fail because there is an uninstalled file.
Solve this by using a directory under ${WORKDIR} so it can't be packaged.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The sysroot of wic-tools is needed for wic, but if rm_work is enabled,
it will be removed before wic has a chance to use it, hence this fix.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This puts the dependencies on the correct task and removes pointless
noexec tasks allowing for a slightly cleaner task structure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added systemd-boot to the list of dependencies of wic-tools
as wic bootimg-efi plugin depends on it.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Current location of .env files $STAGING_DIR/imagedata. It doesn't
depend on machine and be rewritten by the builds for different
machines.
Changed location to $STAGING_DIR/$MACHINE/imagedata to avoid .env
files to be rewritten.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We used to have issues removing tasks like do_fetch due to implications
for targets like world and universe. These have now been resolved.
Removing uneeded tasks has advantages compared to noexec since it means
that accidentally left in dependencies are no longer needed/processed
(e.g. do_patch depends on quilt-native).
This cleans up a number of cases which local analysis highlighted as
being unneeded leading to slightly cleaner task graphs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This meta recipe is for building tools used by wic.
It allows wic to find tools in recipe specific sysroot as
all tools will be present in wic-tools sysroot.
NOTE: task do_build_sysroot is created to ensure that
sysroot is re-populated when package is built. Otherwise it will
be taken from sstate and sysroot will not be populated.
Generated wic-tools.env file for wic to be able to get values of
wic-tools variables when wic run from bitbake.
Also add dependency to grub-efi
Without grub-efi test_iso_image test case fails with this error:
AssertionError: Command 'wic create mkhybridiso --image-name
core-image-minimal' returned non-zero exit status 1:
Error: Please build grub-efi first
Fixed by adding dependency wic-tools -> grub-efi.
[RP: Added syslinux exclusion for non-IA arches]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the recipe depends on the mulitlib libcs all being built
but the dependencies don't account for this. Fix the DEPENDS so
that the requires pieces are all built first rather than relying on
luck.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If TMPDIR is configured to be somewhere outside of TOPDIR (a not
uncommon configuration where you have multiple disks and space on /home
is at a premium) then our attempt to find out the location of paths
under TMPDIR by using a relative path led to horribly broken paths
ending up in the eSDK. To save pain, just force a known value for TMPDIR
(i.e. ${TOPDIR}/tmp) and then we can assume that everywhere else.
Fixes [YOCTO #10797].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were a few straggling expansion parameter removals left for
getVar/getVarFlag where the odd whitespace meant they were missed
on previous passes. There were also some plain broken ussages such
as:
d.getVar('ALTERNATIVE_TARGET', old_name, True)
path = d.getVar('PATH', d, True)
d.getVar('IMAGE_ROOTFS', 'True')
which I've corrected (they happend to work by luck).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
LICENSE and LIC_FILES_CHKSUM apply to the sources specified by SRC_URI,
not to the recipe itself. As such a license declaration for a source-less
recipe makes little sense. The LICENSE declaration is mandatory, but
LIC_FILES_CHKSUM can be removed in such cases.
Remove the LIC_FILES_CHKSUM declarations from all recipes that do not
need it.
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Expand TOOLCHAIN_CONFIGSITE_NOCACHE value immediately before inheriting
cross-canadian to avoid HOST_ARCH being changed from TARGET_ARCH to SDK_ARCH,
thus ensuring its correct value.
[YOCTO #10255]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We still have problems where deploying SDKMACHINE=i686 can cause removal
of SDKMACHINE=x86_64 artefacts.
The reason is that x86_64 is a BUILD_ARCH as well as an SDK_ARCH and
the manifest namespaces overlap. To fix this, set PACKAGE_ARCH and
the stamp-extra-into to include SDK_OS. SDK_OS may not be entirely correct
but it is what sstate.bbclass uses for nativesdk and fixing that is
a separate issue.
This is confirmed to resolve artefact problems on the AB which have been
delaying a new uninative release.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildtools-tarball shouldn't be regenerated when MACHINE changes,
nor should variants for other SDKMACHINE be removed from the deploy
directory when SDKMACHINE changes.
Remove target architecture dependencies so that deploy artefacts
can overlap.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The uninative tarball only contains nativesdk compoents. It should
not get regenerated when MACHINE changes for example. Currently its
sstate arch is also incorrect so changing SDKMACHINE results in other
variants being removed from the deploy directory.
This patch removes the target architecture dependencies so that
deploy artefacts can overlap and it doesn't continually rebuild. This
also fixes various autobuilder/release artefact issues we're having
as a result of these issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
under sstate control
Firstly, these recipes are not target (MACHINE) specific so they should
by SDK_ARCH based, not PACKAGE_ARCH.
Also fix use of SDK_DEPLOY -> SDKDEPOLYDIR after other recent changes.
Together these fixes avoid various build failures and ensure the tarballs
only get built once rather than multiple times.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe is to generate an environment script in
do_populate_ide_support for using an IDE and it
doesn't generate packages at all, so inherit nopackages
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise we see parsing failures in the default configuration:
'''
Nothing RPROVIDES '${TEST_EXPORT_SDK_PACKAGES}' (but
/media/build1/poky/meta/recipes-core/meta/testexport-tarball.bb
RDEPENDS on or otherwise requires it)
'''
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This new recipe is used when exporting runtime test outside
packages that won't be installed in the testing system but
are required for the runtime testing.
This new recipe is almost identical to buildtools-tarball,
but is able to define the SDK packages in local.conf.
[YOCTO #7850]
(From OE-Core rev: fbcd1f9ed6144a76ff6a556d23af30f04c39bfa0)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xrange() no longer exists in python 3, use range()
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Short descriptions should go into SUMMARY (DESCRIPTION will get the same
value if not set.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is required by python3's bitbake.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was added for testing, and not needed any more after:
4a8a74c62836a20610daf029d4cec0b3087758b2
Author: Robert Yang <liezhi.yang@windriver.com>
Date: Mon Mar 21 02:25:50 2016 -0700
gpg_sign.py: get rid of pexpect
So remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the changes to insane.bbclass we don't need LIC_FILES_CHKSUM to be
set for recipes that don't actually pull in any source.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
ERROR: meta-world-pkgdata-1.0-r0 do_populate_lic: QA Issue: meta-world-pkgdata: Recipe file does not have license file information (LIC_FILES_CHKSUM) [license-checksum]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Saul Wold
Otavio Salvador
Alexander Kanavin
Ed Bartosh
Markus Lehtonen
Ming Liu
Paul Eggleton
brian avery
Nathan Rossi
Richard Purdie
Kristian Amlie
Joshua Lock
Olaf Mandel
Chen Qi
Jackie Huang
Mariano Lopez
Robert Yang
Peter Kjellerstedt