aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/initrdscripts/files/init-install-efi.sh
AgeCommit message (Collapse)Author
2016-07-11init-install-efi.sh: Avoid /mnt/mtab creation if already presentdizzyLeonardo Sandoval
The base-files recipe installs /mnt/mtab (it is a softlink of /proc/mounts), so if an image includes the latter, there is no new to created it again inside the install-efi.sh script, otherwise an error may occur as indicated on the bug's site. [YOCTO #7971] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2015-05-01init-install-efi.sh: fix gummiboot entry installationReinette Chatre
After selecting the "install" gummiboot option of a Live image we are seeing boot failure resulting from the gummiboot entries not being installed correctly. This seems to be a problem in this init-install-efi.sh script where it incorrectly installs the gummiboot entries into the root filesystem, not the boot partition. We fix it by installing the entries in the boot partition. (From OE-Core rev: c9b06c79ed8a082d1b385e9f61721aeeda9bf1af) Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-02init-install: Skip CDROM devices during probeDrew Moseley
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-02init-install: Strip partition number from live_dev_nameDrew Moseley
This is needed in case the boot disk was created with mkdiskimage. In that case the parameter passed is a variant of /dev/sda4 which includes the partition number. Without this change this install script will offer to install onto the live media. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-02init-install-efi.sh: Verify /sys based files exist before displaying themDrew Moseley
Some mmc cards do not have all the data files in /sys/block populated. Check for existence before displaying the files to avoid erroring out of the install process. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10init-install-efi.sh: improve hard drive searching processDrew Moseley
(This patch was originally done against init-install.sh in OE-Core rev 358f0584d779825307eec08c023b5ff14e72cf9e) Previously, only unremovable hard drives are searched and are treated as candidates of target disks to intall into. However, it's possible that we're going to install the live image into a removable media such as an USB. This patch enables this possibility. In addition, this patch presents more information about the hard drives so that user may have more knowledge about which hard drive they are going to install their image into. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-10init-install-efi.sh: fix to handle the boot partition correctlyDrew Moseley
(This patch was originally done against init-install.sh in OE-Core rev aa67b1333b4774e1845f562085f7048df65a644f) Previously, the boot partition was created for the target hard drive but there was no corresponding entry for it in /etc/fstab. Besides, even if the boot partition was mounted, it would just result in odd directory hierarchy like /boot/boot/grub. However, what we really need is /boot/grub. This patch fixes this problem. Besides, for future maintance work, this patch also renames some of the intermediate directories. It uses more descriptive names like /tgt_root and /src_root. The name of /ssd is dropped. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-20initrdscripts: fix for /run/mediaChen Qi
mount.sh in udev-extraconf was modified to use /run/media instead of /media. Unfortunately, our scripts in initrdscripts have some dependency on the auto-mounting mechanism proviced by udev-extraconf. So these scripts should also be fixed to use /run/media instead /media, otherwise, our live image cannot work correctly. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-11classes: Add gummiboot classStefan Stanacar
Adds a gummiboot class similar to grub-efi class and makes the necessary changes so it can be used for live/hddimg images as well. One can set EFI_PROVIDER = "gummiboot" in local.conf to use gummiboot instead of grub-efi. Gummiboot requires some kernel options that are not enabled by default, so one has to build with KERNEL_FEATURES_append = " cfg/efi-ext". The install scripts have been updated too, keeping the old behaviour around, but accounting for the new boot loader config files (if they exist). It can be argued that the installer and bootimg are a bit wierd and not necessarily correct, but I wanted to have the exact same behviour with gummiboot. With the default EFI_PROVIDER = "grub-efi" nothing changes, everthing should be just as before. I've tested live boot, install and normal boot on: - FRI2 - genericx86-64 on NUC with: EFI_PROVIDER = "gummiboot" KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-24init-install-efi.sh: Remove unnecessary udev rules file to avoid errorsDarren Hart
Fixes [YOCTO #5233] Modeled after Chen Qi's fix to [YOCTO #3924] from oe-core commit: 6b6db7b4fb7aa17b8e29076decc830149b9d35bc init-install.sh: remove unnecessary udev rules file to avoid error messages /etc/udev/scripts/mount.sh is removed by init-install-efi.sh, but the udev rules file which specifies the invocation of this script is not removed, thus causing the error message during a live install: /etc/udev/scripts/mount.sh: No such file or directory The /etc/udev/rules/automount.rules no longer works once the mount.sh script is removed. Remove it to avoid the error message. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: mihaix.lindner@linux.intel.com Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-24init-install-efi.sh: Fix root= specificationDarren Hart
Fixes [YOCTO #5237] The current grub.cfg manipulation depends on an existing root= parameter. If this doesn't exist, the correct root= parameter will not be added. Instead, remove any existing root= parameters and add the correct one explicitly. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: mihaix.lindner@linux.intel.com Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-17Revert "initramfs-live-install*: fix the "install" boot option"Saul Wold
This was not the correct fix for this issues, it turns out that base-files package was getting installed un-intentionally when rpm-postinsts was split out. The base-files recipe lays down the link that caused the cat failure. [YOCTO #4504] This reverts commit 45e460d0846f0f660128dc06064b597ce40282b3. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-16initramfs-live-install*: fix the "install" boot optionNitin A Kamble
The install boot option was giving the following error when one tried to install the live image on a permanent storage of a BSP. cat: write error Invalid argument Installation image failed sh: can't access tty: job control turned off Further digging into the issue, found out that the install script was trying to do this: cat /proc/mounts > /etc/mtab And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts. So the cat command was failing to write on /etc/mtab. As the contents of the /proc/mounts is already reflected in the /etc/mtab file due to the symlink-ing, there is no need for this step to recreate /etc/mtab in the install script. So just removing this unnecessary step, which solves the install issue of the live images. Fixes this bug: [YOCTO #4229] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-19EFI: Make installer EFI awareDarren Hart
[YOCTO #1919] Create a basic EFI installer script modeled after the existing installer and add it to a new initramfs-live-install-efi recipe. Update the init-live.sh script to distinguish between LABEL=install and LABEL=install-efi and select the appropriate script. Add the efi installer to core-image-minimal-initramfs. Update grub-efi.bbclass to use "LABEL=install-efi" when it detects a label of "install". This is clearly not ideal, but a proper fix would involve decoupling the LABELS assignment from the image-live.bbclass usage of SYSLINUX_LABELS. We should be able to address that in a follow-on clean-up series. V2: Include missing initramfs-live-install-efi_1.0.bb V3: Rebase after Radu's console_params fix Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>