summaryrefslogtreecommitdiffstats
path: root/meta/recipes-connectivity
AgeCommit message (Collapse)Author
2015-02-27libpcap: add pkg-config supportJoe MacDonald
libpcap was not previously installing a pkg-config file. Add a basic one that will allow using 'pkg-config --libs libpcap', for example, in recipes rather than 'pcap-config', which frequently returns incorrect information. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23Revert "bind: fix and enable parallel build"Richard Purdie
This reverts commit b003df03358aea4e9e094ee339a9f6796866961e. We keep seeing parallel make failures on the autobuilder Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23Revert "openssl: fix and enable parallel build"Richard Purdie
This reverts commit 7502fa5febdd7a2281d626f7040782fb1f9af59e. We keep seeing parallel make failures in openssl :( Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-19bind: Fix parallel make issueRobert Yang
Fixed: unix/os.o: file not recognized: File truncated collect2: error: ld returned 1 exit status This is because os.o was built twice: * The implicity rule (depends on unix/os.o) * The "make all" in unix subdir (depends on unix/os.o) Depend on subdirs which is unix only rather than unix/os.o will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-19openssl: disable SSLv3 by defaultBrendan Le Foll
Because of the SSLv3 POODLE vulnerability, it's preferred to simply disable SSLv3 even if patched with the TLS_FALLBACK_SCSV Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-17connman: depend on distro provider of bluezPeter A. Bigot
connman currently supports both bluez4 and bluez5 without distinguishing them at configuration time. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-17ofono: select distro preference for bluez providerPeter A. Bigot
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-17libpcap: select distro preference for bluez providerPeter A. Bigot
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-17neard: select distro preference for bluez providerPeter A. Bigot
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-15openssl: upgrade to 1.0.1kMaxin B. John
Upgrade includes 8 CVE bug fixes Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-14meta: enable parallel build for several recipesRobert Yang
I used a for loop to build these packages more than 520 times, these recipes never failed. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-02-14openssl: fix and enable parallel buildRobert Yang
Fixed: Cannot create directory image/usr: File exists make: *** [install_sw] Error 17 Create /usr to avoid race issues. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-02-14bind: fix and enable parallel buildRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-02-14openssl: Add mapping for microblaze architectureNathan Rossi
Map the microblaze architecture to the linux-generic32 target. Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-14neard: do not ship version.hRobert Yang
The HEADERS' name has been changed to pkginclude_HEADERS, so use nodist_pkginclude_HEADERS, otherwise version.h would be shipped. It would cause other pkgs failed to build if ship version.h to usr/include/version.h Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-02-14bluez5: upgrade to 5.28Peter A. Bigot
- Fixes to GATT service discovery & probing - Fix for bearer selection with dual-mode devices - Fix potential crash when removing devices - Fix issue with incomplete names in EIR data - Fix parsing GATT name characteristics - Fix AVCTP long press & key repetition handling - Fixes for GATT notification handling hex2hcd graduated to installed tool; two new noinst tools See: http://www.bluez.org/release-of-bluez-5-28/ Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-14ofono: upgrade to 1.16Cristian Iorga
- Fix issue with PIN retry handling; - Fix issue with HFP and multiple calls; - Add support for Distracted Driving Reduction; - Add support for available technologies property; - Add support for Telit location reporting driver; - Add support for u-blox SARA-U270 modems; - Add support for Quectel UC15 modems. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
2015-02-14connman: upgrade to 1.28Cristian Iorga
- Fixes an issue with DHCPv6 retransmission timer calculation that causes system load to jump to 100%; - All WiFi P2P issues encountered with Miracast have been addressed; - ConnMan no longer hands off foreground autoscanning to wpa_supplicant as it causes issues when finding hidden WiFi networks; Other changes and fixes include: - Several fixes for handling IPv6 contexts via oFono; - Fix memory deallocation in exit code paths; - Use OPEN auth_alg for wpa_supplicant open WiFi networks; - A WiFi Access Point with unknown strength now has a proper minimum value which translates to a service 'Strenght' property of 30; - Fix byte order in DHCP server identifier; - Properly cancel an ongoing service connect if the Agent exits. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
2015-02-14dhcp-client: Ignore partial checksumsRob Woolley
dhclient will fail to get an IP address if run inside a guest when traffic is flowing over a virtual network interface. The user will see the error message: 5 bad udp checksums in 5 packets No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0. This is because Linux only uses partial checksums for packets that go over virtual network interfaces and dhclient does not like this. See linux kernel commit 78ea85f17b15390e30d8b47488ec7b6cf0790663 ("net: skbuff: improve comment on checksumming") An application can detect this behaviour by checking for the TP_STATUS_CSUMNOTREADY flag in the tp_status field. See linux kernel commit 8dc4194474159660d7f37c495e3fc3f10d0db8cc ("Add optional checksum computation for recvmsg") An extra parameter is added to decode_udp_ip_header() in dhclient to indicate whether or not dhclient should ignore partial checksums. This is used when the TP_STATUS_CSUMNOTREADY bit is set by the guest kernel. This fix has been included in Fedora and Ubuntu, however it has not yet been accepted by ISC upstream. Likely because it is specific to behaviour in Linux and other UNIX variants do not seem to be affected. The patch was imported from the dhcp source RPM in Fedora 21 (http://pkgs.fedoraproject.org/cgit/dhcp.git/tree/dhcp-xen-checksum.patch?h=f21) Originally contributed to fedora-cvs-commit by David Cantrell on Jan 30 2007 (https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg01442.html) Submitted to dhcp-bugs@isc.org - [ISC-Bugs #22806] - by Michael S. Tsirkin (http://comments.gmane.org/gmane.comp.emulators.kvm.devel/65236) (https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html) Upstream-Status: Submitted [dhcp-bugs@isc.org] Signed-off-by: Rob Woolley <rob.woolley@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-08neard: upgrade to 0.15Cristian Iorga
- parallel-build.patch patch removed, included upstream; - systemd unit files provided by neard, YP-provided removed; - improved systemd support. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-07openssh: Fix non-deterministic build behaviourDan McGregor
If maillock.h is found, a dependency on liblockfile will be created. liblockfile is in meta-oe, so we don't want that in an oe-core recipe. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-03openssh: configuration updatesDan McGregor
Rebase sshd_config and ssh_config with openssh upstream. Check for the ed25519 key in the systemd keygen service. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-28bind: fix typo chown->chmodTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23dhcp: not override site.hHongxu Jia
Previously, site.h was overridden for setting _PATH_DHCPD_CONF and _PATH_DHCLIENT_CONF, it caused other MACROs were missing, so we use a patch to instead. The macros NSUPDATE and COMPACT_LEASES existed in site.h Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23dhcp: upgrade to 4.3.1Hongxu Jia
Rebase fixsepbuild.patch to 4.3.1 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23neard: fix B != SRobert Yang
And bump PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23neard: fix parallel issueRobert Yang
There might be no src dir if the src/builtin.h runs earlier, create it to fix the race issue: src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h /bin/sh: src/builtin.h: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23meta: set proper S valuePetter Mabäcker
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-16connman: fix B != SRobert Yang
And bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16portmap: remove obsolete linesRobert Yang
* The SRC_URI and S in portmap.inc was for portmap 5, but we don't have it any more. * Remove DEPENDS = "virtual/fakeroot-native" and fakeroot before do_install. * Remove sbindir = "/sbin" and use "${base_sbindir}" in FILES. * Move patches from dir portmap-6.0 to portmap. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16bluez5: upgrade to 5.27Peter A. Bigot
- Bug fixes in A2DP, OBEX, GATT, and mgmt - Low Energy Secure Connections with 3.19+ kernels See: http://www.bluez.org/release-of-bluez-5-27/ See: http://www.bluez.org/release-of-bluez-5-26/ Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16socat: forcibly disable use of libbsdRoss Burton
Socat will look for openpty() in BSD headers before Linux headers, so if libbsd is present at configure time then that will be used. We don't need to depend on libbsd though, and leaving it floating can cause build errors, so tell configure that the libbsd header isn't present. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16openssh: deliver ssh-copy-idKai Kang
Deliver script ssh-copy-id from openssh which is useful to add an authorized ssh key. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-08bind: Update libxml2 check to make it deterministic.Noor
* Firstly configure scritp was testing files from bin folder. In our case we don't copy bin folder to sysroot for target recipes. So added extra check to validate .pc file from lib folder via a patch to configure.in file. * Secondly linxml2 dependency was missing. So added PACKAGECONFIG for libxml2. Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-07openssl: fix hard paths in native opensslAndré Draszik
This causes the package to not be relocateable from sstate The OpenSSL binaries respect a few environment variables for determining locations of files, so we now use these to point the binaries to the relocated locations. [YOCTO #6827] Signed-off-by: André Draszik <adraszik@digisoft.tv> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2015-01-07openssh: upgrade to 6.7p1Paul Eggleton
* Drop two CVE patches already handled upstream. * Drop nostrip.patch which no longer applies and use the existing --disable-strip configure option instead. * OpenSSH 6.7+ no longer supports tcp wrappers. We could apply the Debian patch to add support back in, but it seems best to follow upstream here unless we have a good reason to do otherwise. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-12-31telepathy: remove (moved to meta-oe)Ross Burton
Nothing in oe-core uses Telepathy, so move these recipes to meta-oe. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-30bind: fix for CVE-2014-8500Sona Sarmadi
[From upstream commit: 603a0e2637b35a2da820bc807f69bcf09c682dce] [YOCTO #7098] External References: =================== https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-8500 Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-30wpa-supplicant: avoid host contamination of drivers by libnl3Justin Capella
(See patch refrenced from OE-core rev: 1c3beda0015da9a0fec2581af7645c9ea122c7e3) Modifies do_configure to inject DRV_CFLAGS variable into wpa_supplicant/.config which is then included during make of drivers. Signed-off-by: Justin Capella <justincapella@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-24bind: fix conf.patch to add db.255 configuration fileChen Qi
Add in conf.patch /etc/bind/db.255 file so that we don't get the following error. zone 255.in-addr.arpa/IN: loading from master file /etc/bind/db.255 failed: file not found Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-24ppp: upgrade 2.4.7Hongxu Jia
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20socat: fix compile erorr against 3.17+ kernel headersBruce Ashfield
With the linux 3.17 kernel socat's configure detects the wrong include for errqueue.h which results in a compilation error. By backporting the gentoo patch from: http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/socat/files/socat-1.7.2.4-linux-3.17.patch Fixes the build issue Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-19openssh: move setting LD to allow for correct overrideSaul Wold
Using the export LD in the recipe does not allow for secodnary toolchain overriding LD later, by setting it in the do_configure_append the export is used by autotools setting LD based on the env, but would allow for override later. [YOCTO #6997] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19connman: use PACKAGECONFIG to control systemd optionRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19ofono: use PACKAGECONFIG for systemd and bluetoothRoss Burton
For clarity use PACKAGECONFIG for the systemd and bluetooth optional features. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-11bluez5: support experimental through PACKAGECONFIGPeter A. Bigot
Make it simple to enable the experimental plugins and tools. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-11bluez5: add a package for tools left in the build areaPeter A. Bigot
In bluez4 gatttool was provided as a command-line interface to the Generic Attribute Profile. In bluez5 this tool is still built but is no longer installed. It is still necessary for those wishing to use GATT since the programmatic API is not yet mature. A variety of other useful tools are treated similarly by bluez5. Make these tools available in the bluez5-noinst-tools package, in a way that allows control over which tools are packaged, with the default being all that are provided in a particular release of bluez. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-11bluez-hcidump: select provider as bluez4 or bluez5Peter A. Bigot
bluez-hcidump was a separate package in bluez4, but was integrated into bluez5. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-05openssh: fix using the original config files in srcdirZheng Junling
Currently, we install our own ssh_config and sshd_config into ${S} in do_compile_append() task. So when finishing compiling, their .out files are generated by the original files, rather than by our own files. In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out files again, and then installing "install-sysconf", which will install these two files into $(DESTDIR), thus we get what we expect. However, when parallel installing, "install-sysconf" may be installed before "$(CONFIGFILES)" sometimes. In this rare case, the .out files generated in the first time rather than those in the second time will be installed into $(DESTDIR), and thus we get an unexpect result. This patch fixes this bug through transfering the installing of our own files from do_compile_append() into do_configure_prepend(). Signed-off-by: Zheng Junling <zhengjunling@huawei.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-03resolvconf: add fixes for busybox and make it workSaul Wold
resolvconf was missing a script and needed readlink which was in /usr/bin. Also the /etc/resolv.conf was not being correctly linked to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties change which is now a file as opposed to created in do_install. Ensure that the correct scripts for ifup/ifdown get installed and that resolvconf is correctly enabled at startup [YOCTO #5361] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-30 10:12:10 +0000