| Age | Commit message (Collapse) | Author |
|---|
|
This patch fixes a build warning which is promoted to an error via -Werror.
changes from v1:
* put "Upstream-Status" in patch itself, not in OE patch header
* fix commit wording
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes a compatibility issue between v86d
and SeaBIOS VGA BIOS where the leal instruction
is not decoded properly. Read the
http://thread.gmane.org/gmane.comp.emulators.qemu/271806
thread for more details.
Patch taken from upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the warning:
WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped
/usr/lib
/usr/lib/gummiboot
/usr/lib/gummiboot/gummibootx64.efi
This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to
fix it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Fix the error:
[snip]
| nm -D -u src/efi/gummiboot.so | grep ' U ' && exit 1 || :
| objcopy -j .text -j .sdata -j .data -j .dynamic \
| -j .dynsym -j .rel -j .rela -j .reloc -j .eh_frame \
| --target=efi-app-x86_64 src/efi/gummiboot.so gummibootx64.efi
| objcopy: src/efi/gummiboot.so: Invalid bfd target
| make[1]: *** [gummibootx64.efi] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make: *** [all] Error 2
[snip]
It uses the "objcopy" directly, which is not suitable for cross compile.
[YOCTO #6054]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The gummiboot depends on gnu-efi which had set:
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
We also need set this for gummiboot, otherwise there would be build
failures for other non-x86 archs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Its LIBDIR in Makefile is:
LIBDIR = $(PREFIX)/lib
This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot:
ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory
[YOCTO #6053]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
gummiboot is a simple UEFI boot manager.
Recipe imported from meta-intel with these changes:
- drop PR and update configure options
- upgraded to latest version
A couple of notes:
- If you wish you can install the gummiboot package on the target and
use 'gummiboot install' to add the payload to the ESP (see gummiboot --help,
just make sure the ESP partition has the boot flag on as gummiboot won't accept it
otherwise). However the point of this recipe is to be used by bootimg.bbclass and
generate images with gummiboot instead of grub-efi.
- You need a kernel which has CONFIG_EFI_STUB=y at least
- The default linux-yocto kernel config does not enable that, easiest way
to enable is to build with KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnu-efi is required by gummiboot.
Imported from meta-intel, PR dropped, no new version available.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Despite the fact that it's currently specific to the Sharp Zaurus, we
kept this in OE-Core up to now as a potential basis for better handling
of device-specific customisations for a wider range of devices. Whilst
moving device-specific customisations to a more central point is still
a laudable goal, these days such functionality probably wouldn't be
implemented on top of zaurusd or even in the same way as zaurusd, and
thus it makes sense to leave its recipe to be maintained in the
meta-handheld layer (where a current recipe already exists.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Those recipes need PR bump so we drop PRINC from meta-fsl-arm layer.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Exclude the .pc from po/POTFILES.in since quilt uses "patch --backup",
which will create the backup file under .pc, this may cause unexpected
errors, for example, on CentOS 5.x, if the backup file is null
(newfile), it's mode will be 000, then we will get errors when xgettext
try to read it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes build failures on uclibc
| lsusb-usbmisc.o: In function `usb_string_to_native':
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:190:
undefined reference to `libiconv_open'
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:199:
undefined reference to `libiconv'
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:202:
undefined reference to `libiconv_close'
| collect2: error: ld returned 1 exit status
| make[2]: *** [lsusb] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename SUMMARY with length > 80 to DESCRIPTION.
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Prefix to EnvironmentFile should be preciding the filenamn.
Signed-off-by: Tobias Blom <tobias.blom@techne-dev.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485bd793edd66ed8361f1e8b86a9e19ea.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop the 2 patches since the functionality is upstream now.
Also sync PACKAGECONFIG with grub 2.00 recipe.
The debugedit problem for 64 bit machines in do_package is still present, though:
ERROR: debugedit failed with exit code 256 (cmd was '/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit' -b '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux' -d '/usr/src/debug' -i -l '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/debugsources.list' '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module'):
/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module: Unhandled relocation 258 in .debug_info section
ERROR: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/temp/log.do_package.29234
ERROR: Task 10 (/build/linaro/build/openembedded-core/meta/recipes-bsp/grub/grub_git.bb, do_package) failed with exit code '1'
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes GNU_HASH problem by adding LDFLAGS to TARGET_CC_ARCH
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Avoids it's auto-detected from sysroot, which will lead implicit results.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Move package-specific defitions to the end
* Define pciutils-ids package as ${PN}-ids
* Add SUMMARY and tweak DESCRIPTION for pciutils-ids package
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fix statement indenting and spacing issues that I happened to notice.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
-mcmodel=large is not supported by gcc with version lower
than 4.4, but we don't need to use memory over 4GiB, so add
a patch to allow compilation without large model support.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
To generate the target EFI image in a native package, it requires
the host gcc have the ability to do -m32/-m64 compiling, but gcc
doesn't have that support on the 32bit version of some distributions
(e.g. rehl, suse), it would fail when build a 64bit target on these
32bit hosts.
In fact, all we need from grub-efi-native is the grub-mkimage binary,
so change the solution to:
* grub-efi-native only install grub-mkimage
* grub-efi compiles target modules, generates EFI image
with grub-mkimage and deploy, but install nothing.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
acpid.c in acpid before 2.0.9 does not properly handle a situation in which
a process has connected to acpid.socket but is not reading any data, which
allows local users to cause a denial of service (daemon hang) via a crafted
application that performs a connect system call but no read system calls.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1159
Signed-off-by: Yue Tao <yue.tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Trevor Woerner
Richard Purdie
Cristian Iorga
Ross Burton
Petter Mabäcker
Matthieu Crapet
Fathi Boudra
Paul Barker
Max Eliaser
Otavio Salvador
Mike Looijmans
Philip Tricca
Koen Kooi
Denys Dmytriyenko
Robert Yang
Stefan Stanacar
Saul Wold
Paul Eggleton
Martin Jansa
Khem Raj
Tobias Blom
Chen Qi
Yasir-Khan
Ming Liu
Koen Kooi
Jackie Huang
Yue Tao