| Age | Commit message (Collapse) | Author |
|---|
|
Currently a lib32-core-image-* SDK prints an incorrect environment-setup-*
file name when installing the SDK. Instead of printing the wrong thing, list
the environment setup files present in the SDK.
As it happens this fixes the message printed with buildtools-tarball too
which someone reported to me about the same time as I finished this patch!
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the extrating faster by:
* Merge the two heavy "for .. find" loops into one
* Move the commands out of for loop rather than inside, this can reduce the
forking amount.
As a result, when install:
* buildtools-nativesdk-standalone: 14s -> 7s (50% saved)
* core-image-minimal-core2-64-toolchain: 56s -> 47s (17% saved)
[YOCTO #8404]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when sh is bash:
$ sh ./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh
Poky (Yocto Project Reference Distro) SDK installer version 1.8+snapshot
===========================================================
./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh: 77: read: Illegal option -e
You are about to install the SDK to "/opt/poky/1.8+snapshot". Proceed[Y/n]? ../SDK2
Installation aborted!
There is ony one bashism "read -e" in toolchain-shar-extract.sh, but
'-e' is useless here, so remove it and use /bin/sh.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tar has supported a --checkpoint option since version 1.15.91, so it
should be safe to use here to print dots showing that it's still doing
something (technically it's not really progress unless you know how many
dots it's going to print, which even it doesn't know at the start, but
it's better than nothing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When publishing SDK, what we want is basically its metadata and sstate
cache objects. We don't want the SDK to be prepared with running bitbake
as it takes time which reproduces meaningless output for the published SDK.
So this patch adds an option to allow for SDK to be extracted without
preparing the build system.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extensible SDK cannot be installed as root so by default offer to install it in
user's home directory under distro/distro_version replacing the normal SDK
version '+' char with a '_' as that's a restricted character for bitbake
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some characters that cannot appear in the installation path, so we
need to check for these
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For a clear look when input.
[YOCTO #8089]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the extensible sdk uses bitbake, which can't run as root, the sdk
shouldn't be installed as root.
Previously it would error out late into setup when bitbake errored
saying not to run bitbake as root.
Now the script errors with a message saying the extensible sdk can't be
installed as root.
[Yocto #7545]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add license file XFree86-1.0 which is needed by packages such as hwdata.
It is from:
http://www.x.org/archive/X11R7.5/doc/LICENSE.html#AEN28
And add 'XFree86-1.0' to SRC_DISTRIBUTE_LICENSES.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This reverts commit 9021ee03e0f9bd36b0ce63fa29dd010e07241fdb
|
|
Tell the user how to set up the SDK environment each time they want to
use it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show a friendly title when running the SDK installer, so the user knows
what SDK they are installing. The title is controlled by the
SDK_INSTALLER_TITLE variable and includes the distro name and SDK
version by default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #7539]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some packages like toybox use it
Change-Id: I2ae4fd024e310bce644581e4c63ed2980ee1998f
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a check to the SDK so that it only runs on systems with kernel versions
it supports.
[YOCTO #6856]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
environment setup file
When specify a target sdk dir that contains default install dir as
subdir,
target_sdk_dir=/opt/poky/$version/
custom_target_sdk_dir=/opt/poky/$version/some
The target_sdk_dir variable in environment-setup file is replaced twice
causes to point to wrong PATH.
In order to fix filter environment-setup file in second replacement.
[YOCTO #7032]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is used by debianutils.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It only fixed the text files in native_sysroot, but there might be some
files in the top installed dir (whose var name is target_sdk_dir in the
code) which are also needed to be fixed.
It used "find $native_sysroot", now also "find $target_sdk_dir -maxdepth 1",
and split the long line into small ones.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The install script is sometimes called under POSIXLY_CORRECT. This
requires two fixes be made:
1. `find -perm /0000` is a gnuism; replace with an equivalent boolean
expression using `-perm -0000`.
2. POSIX grep requires that all options be passed on the command line
before all files; otherwise, the options must be parsed as filenames.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add an SDK_POST_INSTALL_COMMAND variable which allows additional
commands to be added towards the end of the SDK install script, for e.g.
additional processing that needs to be done as part of installing the
SDK.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's possible to generate a command line in the relocate_sdk.sh script
which is too long (long paths, many files). This change limits the
xargs command line by breaking it up into smaller pieces.
One necessary side effect is that the -0 option is no longer used as it
doesn't seem to work properly with -n, so the file name arguments are
now quoted explicitly rather than \0 terminated.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It makes sense to move the script to a separate file, making the bbclass
clearer and allowing the end user to more easily customise or replace
it. There are no functionality changes, just the addition of some
substitution variables.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In commit b0df35f47fb79dc149504bd66d1186b3276f9510
("base-files: Add to make some directories needed by LSB.") there
were new groupings of dirs made. But rather than keep the grouping
names permissions based as they clearly were, it seems that it was
unfortunately misinterpreted as a counter, simply incrementing as
a new group was added.
This leads to dir3755 getting chmod'd to 0755 and dir4775 being
chmod'd to 2775 which to any new reader of the code is terribly
confusing.
Choose names that clearly reflect the permissions, and add a lsb
suffix to indicate the role.
Also note that the settings for /var/mail seem incorrect, and so
they have been aligned with what is seen in most common distros.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mark Hatle did the historical research into why this was so,
and found that it originally was via debian import, and then
it morphed over time:
<fray> +# chown -R root:root ${D}
<fray> +# cd ${D} && chown root:src usr/src
<fray> +# cd ${D} && chown root:staff var/local
<fray> +# cd ${D} && chown root:staff home
<fray> + cd ${D} && chmod 755 `find . -type d`
<fray> + cd ${D} && chmod 1777 `cat ${S}/debian/1777-dirs`
<fray> + cd ${D} && chmod 2775 `cat ${S}/debian/2775-dirs`
<fray> that was the original code
<fray> so THAT is why they're 2775..
<fray> they were original 'src' and 'staff'.. which has gotten lost
sometime in the last 10 years
<fray> AND the origin:
<fray> commit b45c9ed40bb4f893f99127a21776aef3ae888ad7
<fray> Author: Chris Larson <clarson@kergoth.com>
<fray> Date: Tue Sep 30 16:30:41 2003 +0000
<fray> Add base-files 3.0.10 (from debian).
<fray> thats where the brain damage started ... Debian in 2003..
Here we simply convert them to being normal 755 dirs.
[YOCTO #6579]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
About the config files (docbook-xsl.xml), we refered what Ubuntu 13.04 did,
so the xmlto could correctly search the xsl stylesheets.
[YOCTO #2416]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes:
- add missing licence file: tcl
- use binconfig to patch tclConfig.sh paths
- avoid subshell in do_configure()
- use ${PV}
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This device list is only used if USE_DEVFS is set to '0' (which is NOT the default since 2013-12-14,
see commit f54fdd6673a136ee1cee1f3263a8a7820de43ca3) and if IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are not set.
This is, of course a very subjective list but minimal with 62 (special) files.
However, you should be able to boot correctly a lot of embedded linux around.
Changes:
- add sda, sdb, sda[1234], sdb[1234]
- add mmcblk0, mmcblk0p[1234]
- add rtc0, rtc1
- restrict maximum hdaX from 19 to 4 (pata is old)
- add ttyS1
- remove initctl, apm_bios, tty8, ttySA
- sorted entries
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The user mode nfs server allows the use of runqemu without any root
privileges and may even be accelerated with kvm.
Example:
runqemu-extract-sdk tmp-eglibc/deploy/images/qemux86-64/core-image-minimal-qemux86-64.tar.bz2 rootfs
runqemu qemux86-64 `pwd`/rootfs nographic slirp kvm
[YOCTO #5639]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
device_table-minimal.txt: use user/group names instead of uid/gid
This patch changes it back.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of hard coding the uid/gid, we prefer the way of using user/group
names.
Note the way of using uid/gid is still supported.
[YOCTO #1159]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add SGI license used, for example, in glmark2
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Previously count actually behaved as end, and did not take start into
account.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the /run directory from the Filesystem Hierarchy Standard 3.0
Draft [1] and refactors the filesystem as follows:
- Remove creation of /var/volatile/run
- Remove creation of /var/volatile/lock
- Remove symbolic link from /var/run to /var/volatile/run
- Remove symbolic link from /var/lock to /var/volatile/lock
- Add symbolic link from /var/run to /run
- Add symbolic link from /var/lock -> /run/lock
- Add /run to /etc/fstab for sysvinit compatibility
[1] http://www.linuxbase.org/betaspecs/fhs/fhs.html#runRuntimeVariableData
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Since 6775feb9fe935ab01fd9cae2b2d3fce5824a9a72 our local "copy" of the
debug sources has in fact been hardlinked to ${S} and potentially other
places too. This means that any modifications we make to these files
might have wider consequences than intended.
Avoid this potential pitfall by telling fixup_perms() to leave the file
modes in this directory alone. No great harm will result from shipping
debug sources with a mode other than 0644: if the mode was permissive
enough for us to compile the sources in the first place then it must
also be permissive enough for subsequent debugging.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License text is clearer without HTML entities such as '&' and '—'.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The AGPL-3.0 file wasn't filled with the correct text. The file has been
replaced with a copy of http://www.gnu.org/licenses/agpl-3.0.txt.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the license for bzip2 is wrong causing warnings
to be thrown.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bzip requires it's own specific license.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
non-SPDX license name in license.bbclass
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Another lone license with no generic available.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
socat uses this. There is no good standardized text for this,
but as socat is the only one who utilizes this, it should do
for now although this package has some licensing issues according
to debian. See:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632481
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a fairly large commit, so I want to step through some of
what this accomplishes:
1. Additional licenses
I've added/modified/corrected some of the common licenses
within OE-core in prep. for a major license audit. Most of these
are in SPDX format. A few, there is no OSI equivalent.
2. Additional SPDX mappings
I've added some additional SPDX mappings to account for removing
some duplicate licenses. (ie GPL-2 and GPL-2.0 were the same)
I've also remapped a few things to more accurately reflect what
they should be pointing at.
Note: Artistic/LGPL/GPL/MPL. Quite a few LICENSE fields list these
licenses. They make no sense and need auditing. In a future commit
I have some fixes to particularly egregious LICENSE fields, but
a full audit should be done. I've listed to obvious candidates at:
https://wiki.yoctoproject.org/wiki/License_Audit
3. License manifest
We now have a license manifest generation that occurs in rootfs for
everything BUT .deb. This requires the changes Paul Eggleton has
done to rootfs_* particularly the list_installed_packages function.
The manifest is accurate during a parallel bitbake now (Weee!) and
is prime for my planned SPDX format manifest during the next period.
4. License manifest on image.
We also want the ability to add licenses to the image. This
functionality is also in base-files and will be stripped out in my
next commit. The manifest is not added by default and is a two var
setting in license.conf:
If I want *just* the manifest on the image (small) then I set:
COPY_LIC_MANIFEST = "1"
This copies the manifest to:
/usr/share/common-licenses/license.manifest
If I want the actual PKG license text on the image (much larger)
I need to set both both COPY_LIC_MANIFEST and COPY_LIC_DIRS in
license.conf. This will create:
/usr/share/common-licenses/(package name)/(licenses in LIC_SRC_URI)
Word of warning. This can be larger than wanted depending on image
and is probably ripe for linking licenses, but I ran out of time this
week to get that done.
5. Custom License search path.
We now have the ability to add licenses to the build without touching
common-licenses. This is set via license.conf:
LICENSE_PATH += "/path/to/custom/licenses"
You want to make sure the license is unique. license.bbclass picks the
first license it finds.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
files
New users sometimes delete files in tmp/deploy/images assuming they will
be re-created just by re-running the build, and then are confused when
this doesn't work. To discourage people from doing this, create a file
called README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt in
tmp/deploy/images containing an explanation of what needs to be done to
re-create files there.
Fixes [YOCTO #1315] and [YOCTO #1346].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Add a new function that is responsible for fixing directory and file
permissions, owners and groups during the packaging process. This will fix
various issues where two packages may create the same directory and end up
with different permissions, owner and/or group.
The issue being resolved is that if two packages conflict in their ownership
of a directory, the first installed into the rootfs sets the permissions.
This leads to a least potentially non-deterministic filesystems, at worst
security defects.
The user can specify their own settings via the configuration files
specified in FILESYSTEM_PERMS_TABLES. If this is not defined, it will
fall back to loading files/fs-perms.txt from BBPATH. The format of this
file is documented within the file.
By default all of the system directories, specified in bitbake.conf, will
be fixed to be 0755, root, root.
The fs-perms.txt contains a few default entries to correct documentation,
locale, headers and debug sources. It was discovered these are often
incorrect due to being directly copied from the build user environment.
The entries needed to match the base-files package have also been added.
Also tweak a couple of warnings to provide more diagnostic information.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
I've added more licenses from SPDX and corrected the gcc license
so that it is a. parsable and b. accurate to the SPDX standard.
I've also done some cleanup of license text and gdb's LICENSE
field.
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
|
Richard Purdie
Robert Yang
Paul Eggleton
Qi.Chen@windriver.com
Brendan Le Foll
Randy Witt
Kai Kang
Jackie Huang
Khem Raj
Aníbal Limón
Ross Burton
Richard Tollerton
Gary Thomas
Paul Gortmaker
Hongxu Jia
Matthieu Crapet
Jason Wessel
Diego Rondini
Peter Kjellerstedt
Jonathan Liu
Phil Blundell
Paul Barker
Laurentiu Palcu
Flanagan, Elizabeth
Florin Sarbu
Otavio Salvador
Mark Hatle