| Age | Commit message (Collapse) | Author |
|---|
|
bootimg.bbclass using STAGING_DIR_HOST/kernel instead of
STAGING_KERNEL_DIR, resulting in build failure of live images.
| install: cannot stat `/usr/local/dev/yocto/fishriver-test/build/tmp/sysroots/fishriver/kernel/bzImage': No such file or directory
Replace it with STAGING_KERNEL_DIR.
(From OE-Core rev: 8f16811a8d51982a8b3d70e6087aef4a41926840)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #1951]
The do_bootimg code can generate hybrid efi+pcbios images (syslinux and
grub-efi) to boot on platforms with both EFI and legacy BIOS options. The
current implementation copies the kernel, initrd, and rootfs twice,
unnecessarily bloating the image size. This is an especially egregious bug
on -sato images.
Update the classes to use a common install of the kernel, initrd, and rootfs to
the root of the boot media. Grub-efi, syslinux, and isolinux can all reference
this location explicitly with a leading slash.
Tested with an EFI+PCBIOS image in both EFI and PCBIOS boot modes on two
platforms. No ISO image testing was performed.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Fixes [YOCTO #1940]
do_bootimg was performing the FAT overhead calculations assuming FAT32 and then
forcing the use of FAT32 with "-F 32" to mkdosfs. The FAT specification is clear
on cluster count being the determining factor for FAT size (even if the fs
string is set to FAT32, go figure). Syslinux follows this spec, and rightly so,
resulting in a failure on core-image-minimal:
syslinux: zero FAT sectors (FAT12/16)
Drop the "-F 32" from mkdosfs to allow it to select the appropriate FAT size
based on cluster count. Leave the FAT overhead calculation in FAT32. This will
result in a little extra padding for really small images, but not enough extra
to justify recalculating for FAT12 and FAT16.
Tested with a core-image-minimal build for atom-pc. do_bootimg completed
successfully, and the resulting image was FAT16.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Fixes [YOCTO #1852] ... again.
The conversion from sectors to blocks was multiplying by 2 instead
of dividing by 2. Blocks are 1024 bytes, sectors are 512 bytes. The
result was images being much larger than intended.
Reported-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #1852]
The bootimg class wasn't accounting for non-trivial amount of space
required by the directory entries and FATs for the FAT filesystem.
This patch attempts to make an accurate prediction of FAT overhead and
adjusts the image size accordingly. It assumes no more than 16 directory
entries per directory (which fit in a single sector). It also assumes
8.3 filenames. With the ceiling functions rounding up to full sectors
and tracks, these assumptions seem reasonable.
In order to ensure the calculations are accurate, this patch forces the
FAT size to 32, rather than allowing mkdosfs to automatically select 12,
16, or 32 depending on the image being built.
Tested by setting BOOTIMG_EXTRA_SPACE=0 and building core-image-minimal
and core-image-sato for fri2-noemgd from meta-intel.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Saul Wold <sgw@linux.intel.com>
|
|
The initial directory support (-d) added to mkdosfs has proven to be incomplete
and non-compliant with FAT. Rather than continue to maintain this feature and
work around the various issues, we can use mcopy to construct the image.
bootimg.bbclass already depends on mtools-native (although it may not have
needed to previously). No new dependencies are introduced. The image created
passes dosfsck cleanly. Remove the call to dosfsck.
mcopy reported an error with the image we were creating:
Total number of sectors (107574) not a multiple of sectors per track (32)!
Add some logic to ensure the total sector count is an integral number of sectors
per track, including forcing the logical sector size to 512 in the mkdosfs
command.
The du -bks arguments are contradictory, -b is equivalent to "--apparent-size
--block-size=1" and -k is --block-size=1K. If reordered, -kbs will report the
disk usage in bytes insteadk of 1k blocks. Eliminate the ambiguity by using:
du --apparent-size -ks
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A. Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The generated filesystem has some errors that dosfsck is able to repair:
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Checking file /ldlinux.sys (LDLINUX.SYS)
Checking file /initrd (INITRD)
Checking file /syslinux.cfg (SYSLINUX.CFG)
Checking file /EFI (EFI)
Checking file /vmlinuz (VMLINUZ)
Checking file /rootfs.img (ROOTFS.IMG)
/vmlinuz
File size is 4144896 bytes, cluster chain length is > 4145152 bytes.
Truncating file to 4144896 bytes.
Checking file /EFI/.. (..)
Checking file /EFI/BOOT (BOOT)
Checking file /EFI/. (.)
/EFI/..
Start (16022) does not point to .. (0)
/EFI/.
Start (0) does not point to parent (16022)
Checking file /EFI/BOOT/.. (..)
Checking file /EFI/BOOT/. (.)
Checking file /EFI/BOOT/initrd (INITRD)
Checking file /EFI/BOOT/grub.cfg (GRUB.CFG)
Checking file /EFI/BOOT/bootia32.efi (BOOTIA32.EFI)
Checking file /EFI/BOOT/vmlinuz (VMLINUZ)
Checking file /EFI/BOOT/rootfs.img (ROOTFS.IMG)
/EFI/BOOT/..
Start (16021) does not point to .. (16022)
/EFI/BOOT/.
Start (0) does not point to parent (16021)
/EFI/BOOT/vmlinuz
File size is 4144896 bytes, cluster chain length is > 4145152 bytes.
Truncating file to 4144896 bytes.
Performing changes.
/build/poky/fri2/tmp/deploy/images/core-image-minimal-fri2-noemgd-20111216000605.hddimg:
12 files, 26635/26828 clusters
Add a dosfsck command following the mkdosfs command to correct these.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Condition building PCBIOS legacy images on MACHINE_FEATURES containing "pcbios"
or not containing "efi". This ensures existing BSPs will continue to get the
old PCBIOS legacy-only images. New BSPs can add "efi", "pcbios", or both. The
images created likewise support one or the other or both.
EFI-only ISO images are untested.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Create a new grub-efi.bbclass and integrate it into bootimg alongside the
syslinux support. This new class uses the output from the grub-efi-native
recipe. Thanks goes to Josef Ahmad <josef.ahmad@intel.com> for the original
build_grub_cfg() routine.
The EFI features are only added to the image if MACHINE_FEATURES contains
"efi". The resulting images are therefor either legacy boot only (like they
were originally) or legacy boot and EFI boot.
A new "dummy.bbclass" was added to allow for the conditional include
of grub-efi. This makes it so if efi support is not to be built in, we
don't spend time building grub-efi-native just because the include adds
the dependency.
There is a bug in the mkdosfs tool from the dosfstools package which causes
it to crash when the directory passed with the -d parameter contains
sub-directories. An /EFI/BOOT directory is required for a proper EFI
installation. Until it is fixed, we install to the top level directory
for the hddimg.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Josef Ahmad <josef.ahmad@intel.com>
|
|
Working towards a more generic bootimg.bbclass, pull out all
syslinux specific bits and let syslinux.bbclass manage them
directly. This introduces no functional changes to the images
constructed and the behavior remains unchanged.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Separate the construction of the ISO image from that of the hddimg.
This is part of the groundwork for creating a much more flexible
live image builder.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
It's possible to create an "hybrid" iso image that you can both burn
to a CD-Rom and dd to a USB key. isohybrid will create a valid boot
sector for the USB key case.
[YOCTO #1763]
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If an image sets NOHDD = "1" the HDD image won't be build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
location and fix dependencies
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
populate_staging task to populate_sysroot
This change makes the purpose of the staging directory more obvious and
the taskname more true to what it now actually does.
The layout version number is increased due to the change in layout
but code to convert existing directories and insert a symlink for
backwards compatibility is included.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
We are only copying the initrd right now.
|
|
We only had one package for building both the bootloader and the installer,
i.e. target and host code. It used always the host compiler. Split the
package into syslinux and syslinux-installer-native, require both for a
cd bootable image.
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5539 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5535 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5369 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5172 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3989 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3117 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2867 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1911 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
bootimg.bbclass supported creation of FAT filesystem images for usage with
syslinux (kernel and initrd in /boot/) and creation of ISO images with kernel
and initrd on it. ISO images contained also not needed /boot/ directory from
FAT image.
Now still two files are created as result but both contain only needed files.
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1899 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1898 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1897 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1894 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
Darren Hart
Saul Wold
Damien Lespiau
Otavio Salvador
Dongxiao Xu
Richard Purdie
Samuel Ortiz
Andrzej Zaborowski
Samuel Ortiz
Richard Purdie
Marcin Juszkiewicz