| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
many english corrections performed.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I completed the editing pass of this chapter by doing sections 3.3.3 on.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I created a new sub folder to hold the BSP Guide by itself so there are
three folders now for each of the Yocto manuals: BSP Guide, quick start
and poky ref manual. The new folder for the BSP guide is 'bsp-guide'.
It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file,
and its own 'Figures' directory. The 'bsp-guide.xml' file that was
in the poky reference folder was deleted.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I completed general edits to the second chapter of the poky reference
manual. These edits went from section 2.4.5 through the end of the
chapter. They consist of text rewrites for more active voice and follow
general technical writing principles.
I completed the same types of edits in the third chapter of the manual
from the beginning through section 3.3.2.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Extensive language and consistency edits being applied to the manual.
During the 0.9 push I did not have time to make a pass through the
document.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Changed "source poky-4.0/poky-init-build-env poky-4.0-build"
to be "source poky-laverne-4.0/poky-init-build-env poky-4.0-build"
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
There was a grammatical error in the title and redundancy in the
first sentence of this section. Cleaned up the title and wording.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I did a complete edit pass through this chapter. The manual has
not been fully edited from its original state. One critical technical
correction was corrected where the green-3.3 release was referenced.
I changed this to laverne 4.0.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I changed the figure that goes along with building an image based on
Kevin's input. Also, removed several URLs that had 'yoctolinux' in them
along with a 'tar' command example with the same string. LF does
not want these in there.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
with the yocto toolchain tarball
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Removed several blocks of text from section 5.1.2.1.1
"Installing and Setting up the Eclipse IDE". This text according
to Jessica was no longer needed.
|
|
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev.
Also added the package mercurial.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Added commands to support package installation of RPM-based host systems
to the example. Input based on feedback from Dirk.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I have inserted the Poky image in the front matter again because the
book is a Poky Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
The image file was in the same directory as the main reference manual
files. So I moved the file into subdirectory "Figures" with other
figures.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
I could not get the Yocto Project logo to appear correctly in the book
after the title. I also decided that since Poky is by no means
going away that this book should have that image associated with it
as it is the Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
When scaled to fit the page the picture had a black vertical line
artifact to the right. I snipped out the image a little tigher to
eliminate this line.
I also incorporated Dirk's comments tightening up the sequence of
example commands to do the build. I incorporated Fedora 14 note
and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
The link to openembedded was used to reference Linux distributions supporting
Yocto Project. The link has been removed and replaced with more generic
text so as to not have to link to openembedded. Text used is
"A Host system running a supported Linux distribution (i.e. recent releases
of Fedora, OpenSUSE, Debian, and Ubuntu)."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
This conceptual figure has been replaced by a more detailed work
flow representing YP.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
This link was incorrect and has been changed to yoctoproject.com.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
The example commands that build an image were updated to reflect the
real 4.0 release. I updated the paragraph after the example commands
to refer to the new release used in the command examples.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
1) Wording change based on Darren's input of making Linux kernel sound like the only open source part of YL
2) Removal of the "v" option for the tar command example.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
1. Added Richard Purdie's general editing feedback to the "Welcome" and
"Introducing the Yocto Project Development Environment" sections.
2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed
the order of the sample "cd" and "source" commands since the "source" command
builds the directory structure first so changing to the directory before running
"source" made no sense, 3) removed the "bitbake qemu-native" command.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather
than "Target." Also that the two inner boxes be "Set of Emulated Devices" and
"Target CPU." Final change was the use of "Yocto Project Scripts" rather than
"Yocto Linux Scripts."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Feedback from Kevin Tian suggested "OPKG" should be lower-case.
Also, use of "zypper" instead of "YUM." I also lower-cased
"apt-get."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend
recipe. Should you need to reference extra files you should use FILESEXTRAPATHS
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
make sure bbappend files are included in example BBFILES lines
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
Richard Purdie
Scott Rifenbark
Scott Rifenbark
Joshua Lock