aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-11-24mingetty: replace cflags hard-coded into MakefileJoe Slater
Add CFLAGS to EXTRA_OEMAKE to allow us control over debugging and optimization. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-11-24iproute2: pass CFLAGS to Makefile\Joe Slater
Makefile computes CFLAGS, but we can see that our defaults get included by using CCOPTS to pass them to make. Upstream-Status: Pending Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-11-24bind: make "/etc/init.d/bind stop" workRoy Li
Add some configurations, make rndc command be able to controls the named daemon. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24procps: pass CFLAGS to makeJoe Slater
EXTRA_OEMAKE in the recipe currently discards the environment CFLAGS when setting CFLAGS passed to make. We change that to include these options. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24meta-toolchain-qte: add --sysroot option to OE_QMAKE_(CC|CXX|LD)Laurentiu Palcu
When building a QT application using OE_QMAKE_CC/OE_QMAKE_CXX, the --sysroot was not included and the compilation would fail. The user had to add the option manually which was not very user friendly. This happened only when installing the SDK in another location than the default one. Since CC/CXX/LD had this option already included, reuse them. [YOCTO #3409] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24gtk+: update to upstream version 2.24.13Marko Lindqvist
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24xf86-video-omap: drop RPROVIDES/RREPLACES/RCONFLICTSMartin Jansa
* without _${PN} suffix they are invalid: opkg install bash-4.2# opkg install xf86-video-omapfb Package xf86-video-omap-doc is already installed on root. * it's not upgrade to omapfb driver but different driver, so let BSP maintainers decide which one works for their MACHINE * without this xf86-video-omap (or -doc, -dbg, ...) can be pulled to image even when XSERVER clearly says xf86-video-omapfb Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24xf86-video-omapfb: revive driver which actually works and is tested on real ↵Martin Jansa
devices * 0006-omapfb-port-to-new-xserver-video-API.patch added to port it to new xserver video API * other patches just updated headers to be able to git am them Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24xserver-xorg: disable dri2 too when building without glx PACKAGECONFIGMartin Jansa
* it was enabled when dri2proto was built before xserver-xorg Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24xf86-video-omap: add xf86driproto dependency, drop --enable-neon and improve ↵Martin Jansa
DESCRIPTION * xf86driproto was missing * --enable-neon isn't supported by omap driver * DESCRIPTION merged from meta-ti http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-graphics/xorg-driver/xf86-video-omap_git.bb?id=410dc026f2ee24a2346e7563a83f0181c79809cf * this driver also depends PACKAGECONFIG[glx] used in xserver-xorg, without it dri2.h sometimes isn't built (it is autodetected only when dri2proto is built before xserver-xorg) and without dri2.h it now passes do_configure but fails later in do_compile Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24perl: use the exported LDDLFLAGS in generate_config_sh scriptLaurentiu Palcu
The perl shared libraries did not have RPATHs set and that made autoreconf fail when using the SDK. The LDDLFLAGS environment variable was already exported in the recipe but was not used when generating the config.sh. [YOCTO #3338] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24kern-tools: report missing config fragments by nameBruce Ashfield
If a configuration fragment was missing, the previous error output was not clear about the error: | [INFO] doing kernel configme | [INFO] Configuring target/machine combo: "standard/atom-pc" | [INFO] collecting configs in ./meta/meta-series | ERROR: could not sanitize configuration fragments | errors are logged in ... linux/meta/cfg/standard/atom-pc/config.log but we know the name of the missing fragment and can improve the error message to be this: | [ERROR] kernel configuration fragment fragment 'virto.cfg' cannot be found | ERROR. A meta series could not be created for branch yocto/standard/common-pc/atom-pc | ERROR. Could not locate meta series for atom-pc | ERROR. Could not apply patches for atom-pc. | Patch failures can be resolved in the devshell (bitbake -c devshell linux-yocto) [YOCTO #3473] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24linux-yocto-3.4: gcc optimization config featureBruce Ashfield
Updating the meta SRCREV to include a x86 gcc optimization feature, and its use by several BSPs: 1c59807 meta: rangeley: Remove the shortcut path b5477d0 meta: crystalforest: Enable GCC inline compiler option ab2b874 meta: rangeley: Enable GCC inline compiler option 8287750 meta: Add New feature for GCC optimizing Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24opkg: bump SRCREV and drop applied patchesMartin Jansa
* only change upstream which wasn't in oe-core is http://code.google.com/p/opkg/source/detail?r=635 and added testcase for that Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24lsbsetup: drop itKang Kai
lsbsetup provides script LSB_Setup.sh to setup LSB test on image. But script LSB_Test.sh provided by lsbtest replaces its function now. So drop lsbsetup. lsbsetup links /etc/localtime to HongKong zoneinfo file to make LSB wcsftime test case pass(Yocto 1079). But the test case PASS without this link, so remove the link. Other 2 links are moved to packages lsb. [Yocto 3278] Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24packagegroup-core-lsb: remove lsbsetupKang Kai
package lsbsetup has been dropped, so remove it from packagegroup core-lsb. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24lsb: move links from lsbsetup to hereKang Kai
Because package lsbsetup is dropped, move the links created for LSB test to package lsb. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24gcc: Add --enable-linker-build-idColin Walters
See https://fedoraproject.org/wiki/Releases/FeatureBuildId for the benefits this brings. As far as I can tell from searching the discussion archives, there doesn't appear to be a reason not to enable this, and the benefits are real. Both the Red Hat Enterprise Linux 6, all Fedora, and Ubuntu Quantal GCC builds are configured with this on. I plan to use it in gnome-ostree. Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24insane.bbclass : Disable tests for unsafe references in binaries and scripts.Philip Balister
These test look for programs in / that depend on programs in /usr. After a brief discussion in #oe, we decided these tests should be disabled so we can focus on more serious QA issues. If you are working on a system where / and /usr are on different partitions, you should turn these tests back on and resolving the QA warnings. Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24binutils-crosssdk: do not set .interp size to 0x1000 for partial linked objectsLaurentiu Palcu
When building the SDK, the final .interp section size should be set to a bigger value (0x1000) in order to be able to change the dynamic loader's path later. However, we shouldn't do that for partial linked objects (when -r or -rU is used). That's because those objects will then have an .interp section of 0x1000 even if it contains no data and when the final linking is done we will end up with a "cannot move location counter backwards" error. That's because the linker will try to squeeze all the data in the .interp sections found in various partial linked objects into one 0x1000 bytes final .interp section. [YOCTO #3264] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24image classes: use PN for depends, not IMAGE_BASE_NAMEKoen Kooi
Some images override IMAGE_BASE_NAME in the recipe causing targets using image-{live,vmdk} to fail. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24gcc-cross: Explicitly depend on linux-libc-headersRichard Purdie
gcc-cross cannot build without linux-libc-headers but doesn't explicitly depend on it relying on the implied dependency through libc. With cases where pieces can be installed through sstate, we now need this explicit dependency to ensure builds with partial sstate work. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24sstate: Explicitly define populate_sysroot task relationshipsRichard Purdie
Clean up and clarify the populate_sysroot task dependencies. Target sysroot packages do need their dependencies installed, as do some target/cross relationships. We can whitelist the *-initial dependencies as these are never needed indirectly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24sstate: Add a rule for target sysroot requirements from cross dependenciesRichard Purdie
For example gcc-cross depends on linux-libc-headers and needs it to be present to build/work correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24build-appliance-image: Add explict dependency on do_unpackRichard Purdie
The code called by do_rootfs explicitly needs the code obtained during do_unpack. If built from sstate, it might not be present so we ensure it is by adding an explicit dependency. This fixes build failures when building from sstate. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24scripts/sstate-cache-management.sh: Fix stamp handling after recent layout ↵Richard Purdie
change Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24scripts/cleanup-workdir: Adpat to new workdir layoutRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22Revert "kern-tools: report missing config fragments by name"Richard Purdie
This reverts commit 46cc0d0a2f1486bf541c1a1b11075de3da396cc2 since the revision in question isn't in the repository.
2012-11-22kern-tools: report missing config fragments by nameBruce Ashfield
If a configuration fragment was missing, the previous error output was not clear about the error: | [INFO] doing kernel configme | [INFO] Configuring target/machine combo: "standard/atom-pc" | [INFO] collecting configs in ./meta/meta-series | ERROR: could not sanitize configuration fragments | errors are logged in ... linux/meta/cfg/standard/atom-pc/config.log but we know the name of the missing fragment and can improve the error message to be this: | [ERROR] kernel configuration fragment fragment 'virto.cfg' cannot be found | ERROR. A meta series could not be created for branch yocto/standard/common-pc/atom-pc | ERROR. Could not locate meta series for atom-pc | ERROR. Could not apply patches for atom-pc. | Patch failures can be resolved in the devshell (bitbake -c devshell linux-yocto) [YOCTO #3473] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22kernel-yocto: clarify KMETA branch commentsBruce Ashfield
Having a meta branch is not strictly required by the tools (and recipes like linux-yocto-custom do not have meta branches), but the comments in the kernel-yocto.bbclass could lead someone to think that it was required. This commit clearifies the comment to the following: # We can fix up the kernel repository even if it wasn't a bare clone. # If KMETA is defined, the branch must exist, but a machine branch # can be missing since it may be created later by the tools. [YOCTO #3422] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22linux-yocto/3.4: uprobes: reinstate config options for 'uprobe' featureBruce Ashfield
bumping the meta SRCREV to import the following fix: [ uprobes: reinstate config options for 'uprobe' feature commit 17ec51adfff (meta: cleanup invalid/obselete 3.4 CONFIG options) removed the uprobes config options, this restores them. ] Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22linux-yocto/3.0: fix virtio configuration typoBruce Ashfield
The recent tools updates in master exposed a typo that has existed in the 3.0 kernel meta data and that breaks the build for boards still using the 3.0 kernel. Bumping the meta SRCREV to pickup the following fix: [ commit fa9b8c24e84bb9d75d08d197c84c50ce4f99c424 Author: Bruce Ashfield <bruce.ashfield@windriver.com> Date: Wed Nov 21 09:24:46 2012 -0500 meta: fix typo in virtio.scc virtio.scc was referring to an invalid/incorrect virto.cfg. Fixing this typo fixes the build for boards still using the 3.0 kernel. ] Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22python-smart-backend: Remove bogus runtime virtual/Richard Purdie
At runtime virtual/ providers make *no* sense at all. They also break debian packaging since the "/" character is not allowed in debian package names. This patch removes this runtime provider selection code since it is not workable and breaks builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22xf86-video-omapfb: dropRichard Purdie
This driver has been superceeded by a dri omap driver. This driver no longer builds against current versions of the xserver. If someone wants to do the work to resurect it, that is fine but until that happens there is no point in keeping broken code in the tree which won't even compile. It can be easily brought back from git history. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-22xf86-video-omap: don't use AC_CHECK_FILERoss Burton
Upstream uses AC_CHECK_FILE to find dri.h, but that errors out when cross-compiling. Until oe-core 1b0d9cb1801a8eb68c82dfcda5a1da420ac8dd83 this wasn't a problem because we patched AC_CHECK_FILE to always pass, which was a nasty hack. Patch configure.ac to use pkg-config like it should, and not AC_CHECK_FILE. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21build-appliance-image: Update to dee77eca39f406f90e60d9c5ef7a66fcc8f57dbf commitCristian Iorga
There are a lot of improvements in Hob and a critical fix to bitbake affecting Build Appliance, so the poky revision is upped to include these changes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21builder: fix adduser breakage with passwordCristian Iorga
Build Appliance needs to have for the builder user a password set. However, the useradd.bbclass requires the last parameter to be the user's group name. Previously, the password was the last parameter to useradd command. Fixed using the right order for parameters. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21Revert "bitbake.conf: Drop obsolete FILESDIR setting"Richard Purdie
This reverts commit d6e5ceafcaef06b8a3f9acc2aa826a40a016f913 since the value is clearly still being used in local file urls that are only hit at do_unpack time.
2012-11-21ldconfig/cdrtools/icecc-create-env/linuxdoc-tools/python: Set FILESPATH to ↵Richard Purdie
find -native files In a small number of cases we need to have ${PN} in FILESPATH rather than ${BPN}. Rather than hurt readability for all other recipes, set FILESPATH in these recipes so we can prune the default. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21classes: Drop do_package stamp-extra-infoRichard Purdie
This was needed when do_package for target recipes was target specific however since it now isn't we can remove these stale references. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21utils: Optimise looping in base_set_filespathRichard Purdie
Calling split on the same expression, once per loop iteration is inefficent and pointless, particularly in a function called by every recipe during parsing. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21libffi: Use a more standard layout for patch filesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21trace-cmd: Simplify SRC_URI patch entryRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21matchbox-panel-2: Use a more standard layout for patch filesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21bitbake.conf: Drop obsolete FILESDIR settingRichard Purdie
FILESPATH is the preferred way of finding files now. Having a value for FILESDIR which defaults to paths which will have already been searched is pointless at best. This is the final step in letting us drop FILESDIR support entirely from bitbake at some future date. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21x-load: Replace FILESDIR with FILESPATHRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21opkg: Drop unnecessary FILESDIR settingRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21qemu_git: Drop unnecessary FILESDIR settingRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21gcc: Use FILESPATH instead of FILESDIR and cleanup/simplifyRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21build-appliance-image: Simplify fetch/unpack executionRichard Purdie
This provides a slightly neater way of ensuring fetch/unpack get executed (image.bbclass marks them as noexec) since I found the current approach harder to understand at first glance. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-01 22:20:36 +0000