summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch')
-rw-r--r--meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch422
1 files changed, 0 insertions, 422 deletions
diff --git a/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch b/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch
deleted file mode 100644
index 2013933b69..0000000000
--- a/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-loopback.patch
+++ /dev/null
@@ -1,422 +0,0 @@
-From d88af5aa0312ea18aac791d66661da79b7bcd032 Mon Sep 17 00:00:00 2001
-From: "Maxin B. John" <maxin.john@intel.com>
-Date: Wed, 21 Dec 2016 15:32:07 +0200
-Subject: [PATCH] inet[6].defn: fix inverted checks for loopback
-
-Compared to the hurd link.defn for loopback, we see these
-are inverted, meaning that you would only be able to configure
-a loopback device that was _not_ named "lo" (unlikely to exist).
-
-The result was that we'd update /run/network/ifstate for "lo"
-but never actually do anything for up/down, as shown below:
-
-root@localhost:~# ifconfig -s
-Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
-eth0 1500 0 7736329 0 2016 0 5289422 0 0 0 BMRU
-lo 65536 0 18 0 0 0 18 0 0 0 LRU
-root@localhost:~# ifdown lo
-root@localhost:~# echo $?
-0
-root@localhost:~# ifconfig -s
-Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
-eth0 1500 0 7736406 0 2016 0 5289455 0 0 0 BMRU
-lo 65536 0 18 0 0 0 18 0 0 0 LRU
-root@localhost:~# ifconfig lo down
-root@localhost:~# ifconfig -s
-Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
-eth0 1500 0 7736474 0 2016 0 5289481 0 0 0 BMRU
-root@localhost:~#
-
-Also reverted the commit:
-commit 80b878497663dae08f70b4d3cffe127b57a3cfc
-which uses absolute paths to binaries called by ifup/ifdown.
-
-Upstream-Status: Inappropriate [OE specific]
-
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-Signed-off-by: Maxin B. John <maxin.john@intel.com>
----
- inet.defn | 148 +++++++++++++++++++++++++++++++-------------------------------
- 1 file changed, 74 insertions(+), 74 deletions(-)
-
-diff --git a/inet.defn b/inet.defn
-index 75e6744..b5f5da2 100644
---- a/inet.defn
-+++ b/inet.defn
-@@ -6,10 +6,10 @@ method loopback
- This method may be used to define the IPv4 loopback interface.
-
- up
-- /bin/ip link set dev %iface% up if (!iface_is_lo())
-+ ip link set dev %iface% up if (iface_is_lo())
-
- down
-- /bin/ip link set dev %iface% down if (!iface_is_lo())
-+ ip link set dev %iface% down if (iface_is_lo())
-
- method static
- description
-@@ -36,17 +36,17 @@ method static
- broadcast compute_v4_broadcast
-
- up
-- /bin/ip addr add %address%[[/%netmask%]] [[broadcast %broadcast%]] \
-+ ip addr add %address%[[/%netmask%]] [[broadcast %broadcast%]] \
- [[peer %pointopoint%]] [[scope %scope%]] dev %iface% label %iface%
-- /bin/ip link set dev %iface% [[mtu %mtu%]] [[address %hwaddress%]] up
-+ ip link set dev %iface% [[mtu %mtu%]] [[address %hwaddress%]] up
-
-- [[ /bin/ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]]
-+ [[ ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]]
-
- down
-- [[ /bin/ip route del default via %gateway% [[metric %metric%]] dev %iface% 2>&1 1>/dev/null || true ]]
-- /bin/ip addr del %address%[[/%netmask%]] [[broadcast %broadcast%]] \
-+ [[ ip route del default via %gateway% [[metric %metric%]] dev %iface% 2>&1 1>/dev/null || true ]]
-+ ip addr del %address%[[/%netmask%]] [[broadcast %broadcast%]] \
- [[peer %pointopoint%]] [[scope %scope%]] dev %iface% label %iface%
-- /bin/ip link set dev %iface% down \
-+ ip link set dev %iface% down \
- if (iface_is_link())
-
- method manual
-@@ -63,12 +63,12 @@ method manual
- hwaddress cleanup_hwaddress
-
- up
-- [[/bin/ip link set dev %iface% mtu %mtu%]]
-- [[/bin/ip link set dev %iface% address %hwaddress%]]
-- /bin/ip link set dev %iface% up 2>/dev/null || true
-+ [[ip link set dev %iface% mtu %mtu%]]
-+ [[ip link set dev %iface% address %hwaddress%]]
-+ ip link set dev %iface% up 2>/dev/null || true
-
- down
-- /bin/ip link set dev %iface% down 2>/dev/null || true \
-+ ip link set dev %iface% down 2>/dev/null || true \
- if (iface_is_link() && !do_all)
-
- method dhcp
-@@ -93,33 +93,33 @@ method dhcp
- hwaddress cleanup_hwaddress
-
- up
-- [[/bin/ip link set dev %iface% address %hwaddress%]]
-- /sbin/dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
-+ [[ip link set dev %iface% address %hwaddress%]]
-+ dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
- [[-e IF_METRIC=%metric%]] \
- if (execable("/sbin/dhclient"))
-- /sbin/pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \
-+ pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \
- elsif (execable("/sbin/pump"))
-- /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x hostname:%hostname%]] \
-+ udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x hostname:%hostname%]] \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
-+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
- [[-l %leasetime%]] [[-m %metric%]] %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-
- down
-- /sbin/dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
-+ dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
- if (execable("/sbin/dhclient"))
-- /sbin/pump -i %iface% -r \
-+ pump -i %iface% -r \
- elsif (execable("/sbin/pump"))
-- if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface%.pid); fi \
-+ if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(cat /run/udhcpc.%iface%.pid); kill -TERM $(cat /run/udhcpc.%iface%.pid); fi \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd -k %iface% \
-+ dhcpcd -k %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-
-- /bin/ip link set dev %iface% down \
-+ ip link set dev %iface% down \
- if (iface_is_link())
-
- method bootp
-@@ -134,11 +134,11 @@ method bootp
- whatever it really is.
-
- up
-- /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \
-+ bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \
- [[--hwaddr %hwaddr%]] --returniffail --serverbcast
-
- down
-- /bin/ip link set dev %iface% down \
-+ ip link set dev %iface% down \
- if (iface_is_link())
-
- method tunnel
-@@ -158,13 +158,13 @@ method tunnel
- ttl time -- TTL setting
- mtu size -- MTU size
- up
-- /bin/ip tunnel add %iface% mode %mode% remote %endpoint% [[local %local%]] \
-+ ip tunnel add %iface% mode %mode% remote %endpoint% [[local %local%]] \
- [[ttl %ttl%]]
-- /bin/ip link set %iface% up [[mtu %mtu%]]
-- /bin/ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]]
-- [[ /bin/ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]]
-+ ip link set %iface% up [[mtu %mtu%]]
-+ ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]]
-+ [[ ip route add default via %gateway% [[metric %metric%]] dev %iface% onlink ]]
- down
-- /bin/ip tunnel del %iface%
-+ ip tunnel del %iface%
-
- method ppp
- description
-@@ -175,9 +175,9 @@ method ppp
- unit number -- Use /number/ as the ppp unit number.
- options string -- Pass /string/ as additional options to pon.
- up
-- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
-+ pon [[%provider%]] [[unit %unit%]] [[%options%]]
- down
-- /usr/bin/poff [[%provider%]]
-+ poff [[%provider%]]
-
- method wvdial
- description
-@@ -186,10 +186,10 @@ method wvdial
- options
- provider name -- Use /name/ as the provider (from /etc/wvdial.conf).
- up
-- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
-+ start-stop-daemon --start -x /usr/bin/wvdial \
- -p /run/wvdial.%iface%.pid -b -m -- [[ %provider% ]]
- down
-- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
-+ start-stop-daemon --stop -x /usr/bin/wvdial \
- -p /run/wvdial.%iface%.pid -s 2
-
-
-@@ -200,9 +200,9 @@ method ipv4ll
- known as APIPA or IPAC, and often colloquially referred to
- as "Zeroconf address".
- up
-- /usr/sbin/avahi-autoipd -D %iface%
-+ avahi-autoipd -D %iface%
- down
-- /usr/sbin/avahi-autoipd --kill %iface%
-+ avahi-autoipd --kill %iface%
-
- architecture kfreebsd
-
-@@ -211,12 +211,12 @@ method loopback
- This method may be used to define the IPv4 loopback interface.
-
- up
-- /sbin/ifconfig %iface% 127.0.0.1 up \
-- if (!iface_is_lo())
-+ ifconfig %iface% 127.0.0.1 up \
-+ if (iface_is_lo())
-
- down
-- /sbin/ifconfig %iface% down \
-- if (!iface_is_lo())
-+ ifconfig %iface% down \
-+ if (iface_is_lo())
-
- method static
- description
-@@ -238,15 +238,15 @@ method static
- hwaddress cleanup_hwaddress
-
- up
-- [[ /sbin/ifconfig %iface% link %hwaddress%]]
-- /sbin/ifconfig %iface% %address% [[netmask %netmask%]] [[broadcast %broadcast%]] \
-+ [[ ifconfig %iface% link %hwaddress%]]
-+ ifconfig %iface% %address% [[netmask %netmask%]] [[broadcast %broadcast%]] \
- [[pointopoint %pointopoint%]] [[media %media%]] [[mtu %mtu%]] \
- up
-- [[ /sbin/route add default %gateway% ]]
-+ [[ route add default %gateway% ]]
-
- down
-- [[ /sbin/route del default %gateway% 2>&1 1>/dev/null || true ]]
-- /sbin/ifconfig %iface% down
-+ [[ route del default %gateway% 2>&1 1>/dev/null || true ]]
-+ ifconfig %iface% down
-
- method manual
- description
-@@ -279,30 +279,30 @@ method dhcp
- hwaddress cleanup_hwaddress
-
- up
-- [[/sbin/ifconfig %iface% link %hwaddress%]]
-- /sbin/dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
-+ [[ifconfig %iface% link %hwaddress%]]
-+ dhclient -v -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
- [[-e IF_METRIC=%metric%]] \
- if (execable("/sbin/dhclient"))
-- /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \
-+ udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H %hostname%]] \
- [[-c %client%]] \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
-+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
- [[-l %leasetime%]] %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-
- down
-- /sbin/dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
-+ dhclient -v -r -pf /run/dhclient.%iface%.pid -lf /var/lib/dhcp/dhclient.%iface%.leases -I -df /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
- if (execable("/sbin/dhclient"))
-- if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface%.pid); fi \
-+ if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(cat /run/udhcpc.%iface%.pid); kill -TERM $(cat /run/udhcpc.%iface%.pid); fi \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd -k %iface% \
-+ dhcpcd -k %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-
-- /sbin/ifconfig %iface% down
-+ ifconfig %iface% down
-
- method bootp
- description
-@@ -316,11 +316,11 @@ method bootp
- whatever it really is.
-
- up
-- /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \
-+ bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server %server%]] \
- [[--hwaddr %hwaddr%]] --returniffail --serverbcast
-
- down
-- /sbin/ifconfig %iface% down
-+ ifconfig %iface% down
-
- method ppp
- description
-@@ -331,9 +331,9 @@ method ppp
- unit number -- Use /number/ as the ppp unit number.
- options string -- Pass /string/ as additional options to pon.
- up
-- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
-+ pon [[%provider%]] [[unit %unit%]] [[%options%]]
- down
-- /usr/bin/poff [[%provider%]]
-+ poff [[%provider%]]
-
- method wvdial
- description
-@@ -342,10 +342,10 @@ method wvdial
- options
- provider name -- Use /name/ as the provider (from /etc/wvdial.conf).
- up
-- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
-+ start-stop-daemon --start -x /usr/bin/wvdial \
- -p /run/wvdial.%iface%.pid -b -m -- [[ %provider% ]]
- down
-- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
-+ start-stop-daemon --stop -x /usr/bin/wvdial \
- -p /run/wvdial.%iface%.pid -s 2
-
-
-@@ -356,9 +356,9 @@ method ipv4ll
- known as APIPA or IPAC, and often colloquially referred to
- as "Zeroconf address".
- up
-- /usr/sbin/avahi-autoipd -D %iface%
-+ avahi-autoipd -D %iface%
- down
-- /usr/sbin/avahi-autoipd --kill %iface%
-+ avahi-autoipd --kill %iface%
- architecture hurd
-
- method loopback
-@@ -367,11 +367,11 @@ method loopback
-
- up
- inetutils-ifconfig --interface %iface% --address 127.0.0.1 --up \
-- if (!iface_is_lo())
-+ if (iface_is_lo())
-
- down
- inetutils-ifconfig --interface %iface% --down \
-- if (!iface_is_lo())
-+ if (iface_is_lo())
-
- method static
- description
-@@ -432,23 +432,23 @@ method dhcp
-
- up
- [[Warning: Option hwaddress: %hwaddress% not yet supported]]
-- /sbin/dhclient -v -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
-+ dhclient -v -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
- if (execable("/sbin/dhclient"))
-- /sbin/udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H %hostname%]] \
-+ udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H %hostname%]] \
- [[-c %client%]] \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
-+ dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
- [[-l %leasetime%]] %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-
- down
-- /sbin/dhclient -v -r -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
-+ dhclient -v -r -pf /run/dhclient.%iface///.%.pid -lf /var/lib/dhcp/dhclient.%iface///.%.leases -I -df /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
- if (execable("/sbin/dhclient"))
-- if test -f /run/udhcpc.%iface///.%.pid; then kill -USR2 $(/bin/cat /run/udhcpc.%iface///.%.pid); kill -TERM $(/bin/cat /run/udhcpc.%iface///.%.pid); fi \
-+ if test -f /run/udhcpc.%iface///.%.pid; then kill -USR2 $(cat /run/udhcpc.%iface///.%.pid); kill -TERM $(cat /run/udhcpc.%iface///.%.pid); fi \
- elsif (execable("/sbin/udhcpc"))
-- /sbin/dhcpcd -k %iface% \
-+ dhcpcd -k %iface% \
- elsif (execable("/sbin/dhcpcd"))
- echo 'No DHCP client software found!' >/dev/stderr; false \
- elsif (1)
-@@ -482,9 +482,9 @@ method ppp
- unit number -- Use /number/ as the ppp unit number.
- options string -- Pass /string/ as additional options to pon.
- up
-- /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
-+ pon [[%provider%]] [[unit %unit%]] [[%options%]]
- down
-- /usr/bin/poff [[%provider%]]
-+ poff [[%provider%]]
-
- method wvdial
- description
-@@ -493,10 +493,10 @@ method wvdial
- options
- provider name -- Use /name/ as the provider (from /etc/wvdial.conf).
- up
-- /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
-+ start-stop-daemon --start -x /usr/bin/wvdial \
- -p /run/wvdial.%iface///.%.pid -b -m -- [[ %provider% ]]
- down
-- /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
-+ start-stop-daemon --stop -x /usr/bin/wvdial \
- -p /run/wvdial.%iface///.%.pid -s 2
-
-
-@@ -507,6 +507,6 @@ method ipv4ll
- known as APIPA or IPAC, and often colloquially referred to
- as "Zeroconf address".
- up
-- /usr/sbin/avahi-autoipd -D %iface%
-+ avahi-autoipd -D %iface%
- down
-- /usr/sbin/avahi-autoipd --kill %iface%
-+ avahi-autoipd --kill %iface%
---
-2.4.0
-