diff options
Diffstat (limited to 'meta/recipes-connectivity/wpa-supplicant')
8 files changed, 483 insertions, 1688 deletions
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch new file mode 100644 index 0000000000..c04c608bde --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch @@ -0,0 +1,33 @@ +From 57b12a1e43605f71239a21488cb9b541f0751dda Mon Sep 17 00:00:00 2001 +From: Alex Kiernan <alexk@zuma.ai> +Date: Thu, 21 Apr 2022 10:15:29 +0100 +Subject: [PATCH] Install wpa_passphrase when not disabled + +As part of fixing CONFIG_NO_WPA_PASSPHRASE, whilst wpa_passphrase gets +built, its not installed during `make install`. + +Fixes: cb41c214b78d ("build: Re-enable options for libwpa_client.so and wpa_passphrase") +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> +Upstream-Status: Submitted [http://lists.infradead.org/pipermail/hostap/2022-April/040448.html] +--- + wpa_supplicant/Makefile | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index 0bab313f2355..12787c0c7d0f 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -73,6 +73,9 @@ $(DESTDIR)$(BINDIR)/%: % + + install: $(addprefix $(DESTDIR)$(BINDIR)/,$(BINALL)) + $(MAKE) -C ../src install ++ifndef CONFIG_NO_WPA_PASSPHRASE ++ install -D wpa_passphrase $(DESTDIR)/$(BINDIR)/wpa_passphrase ++endif + ifdef CONFIG_BUILD_WPA_CLIENT_SO + install -m 0644 -D libwpa_client.so $(DESTDIR)/$(LIBDIR)/libwpa_client.so + install -m 0644 -D ../src/common/wpa_ctrl.h $(DESTDIR)/$(INCDIR)/wpa_ctrl.h +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-PEAP-client-Update-Phase-2-authentication-requiremen.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-PEAP-client-Update-Phase-2-authentication-requiremen.patch new file mode 100644 index 0000000000..620560d3c7 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-PEAP-client-Update-Phase-2-authentication-requiremen.patch @@ -0,0 +1,213 @@ +From f6f7cead3661ceeef54b21f7e799c0afc98537ec Mon Sep 17 00:00:00 2001 +From: Jouni Malinen <j@w1.fi> +Date: Sat, 8 Jul 2023 19:55:32 +0300 +Subject: [PATCH] PEAP client: Update Phase 2 authentication requirements + +The previous PEAP client behavior allowed the server to skip Phase 2 +authentication with the expectation that the server was authenticated +during Phase 1 through TLS server certificate validation. Various PEAP +specifications are not exactly clear on what the behavior on this front +is supposed to be and as such, this ended up being more flexible than +the TTLS/FAST/TEAP cases. However, this is not really ideal when +unfortunately common misconfiguration of PEAP is used in deployed +devices where the server trust root (ca_cert) is not configured or the +user has an easy option for allowing this validation step to be skipped. + +Change the default PEAP client behavior to be to require Phase 2 +authentication to be successfully completed for cases where TLS session +resumption is not used and the client certificate has not been +configured. Those two exceptions are the main cases where a deployed +authentication server might skip Phase 2 and as such, where a more +strict default behavior could result in undesired interoperability +issues. Requiring Phase 2 authentication will end up disabling TLS +session resumption automatically to avoid interoperability issues. + +Allow Phase 2 authentication behavior to be configured with a new phase1 +configuration parameter option: +'phase2_auth' option can be used to control Phase 2 (i.e., within TLS +tunnel) behavior for PEAP: + * 0 = do not require Phase 2 authentication + * 1 = require Phase 2 authentication when client certificate + (private_key/client_cert) is no used and TLS session resumption was + not used (default) + * 2 = require Phase 2 authentication in all cases + +Signed-off-by: Jouni Malinen <j@w1.fi> + +CVE: CVE-2023-52160 +Upstream-Status: Backport [https://w1.fi/cgit/hostap/commit/?id=8e6485a1bcb0baffdea9e55255a81270b768439c] + +Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com> + +--- + src/eap_peer/eap_config.h | 8 ++++++ + src/eap_peer/eap_peap.c | 40 +++++++++++++++++++++++++++--- + src/eap_peer/eap_tls_common.c | 6 +++++ + src/eap_peer/eap_tls_common.h | 5 ++++ + wpa_supplicant/wpa_supplicant.conf | 7 ++++++ + 5 files changed, 63 insertions(+), 3 deletions(-) + +diff --git a/src/eap_peer/eap_config.h b/src/eap_peer/eap_config.h +index 3238f74..047eec2 100644 +--- a/src/eap_peer/eap_config.h ++++ b/src/eap_peer/eap_config.h +@@ -469,6 +469,14 @@ struct eap_peer_config { + * 1 = use cryptobinding if server supports it + * 2 = require cryptobinding + * ++ * phase2_auth option can be used to control Phase 2 (i.e., within TLS ++ * tunnel) behavior for PEAP: ++ * 0 = do not require Phase 2 authentication ++ * 1 = require Phase 2 authentication when client certificate ++ * (private_key/client_cert) is no used and TLS session resumption was ++ * not used (default) ++ * 2 = require Phase 2 authentication in all cases ++ * + * EAP-WSC (WPS) uses following options: pin=Device_Password and + * uuid=Device_UUID + * +diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c +index 12e30df..6080697 100644 +--- a/src/eap_peer/eap_peap.c ++++ b/src/eap_peer/eap_peap.c +@@ -67,6 +67,7 @@ struct eap_peap_data { + u8 cmk[20]; + int soh; /* Whether IF-TNCCS-SOH (Statement of Health; Microsoft NAP) + * is enabled. */ ++ enum { NO_AUTH, FOR_INITIAL, ALWAYS } phase2_auth; + }; + + +@@ -114,6 +115,19 @@ static void eap_peap_parse_phase1(struct eap_peap_data *data, + wpa_printf(MSG_DEBUG, "EAP-PEAP: Require cryptobinding"); + } + ++ if (os_strstr(phase1, "phase2_auth=0")) { ++ data->phase2_auth = NO_AUTH; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Do not require Phase 2 authentication"); ++ } else if (os_strstr(phase1, "phase2_auth=1")) { ++ data->phase2_auth = FOR_INITIAL; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Require Phase 2 authentication for initial connection"); ++ } else if (os_strstr(phase1, "phase2_auth=2")) { ++ data->phase2_auth = ALWAYS; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Require Phase 2 authentication for all cases"); ++ } + #ifdef EAP_TNC + if (os_strstr(phase1, "tnc=soh2")) { + data->soh = 2; +@@ -142,6 +156,7 @@ static void * eap_peap_init(struct eap_sm *sm) + data->force_peap_version = -1; + data->peap_outer_success = 2; + data->crypto_binding = OPTIONAL_BINDING; ++ data->phase2_auth = FOR_INITIAL; + + if (config && config->phase1) + eap_peap_parse_phase1(data, config->phase1); +@@ -454,6 +469,20 @@ static int eap_tlv_validate_cryptobinding(struct eap_sm *sm, + } + + ++static bool peap_phase2_sufficient(struct eap_sm *sm, ++ struct eap_peap_data *data) ++{ ++ if ((data->phase2_auth == ALWAYS || ++ (data->phase2_auth == FOR_INITIAL && ++ !tls_connection_resumed(sm->ssl_ctx, data->ssl.conn) && ++ !data->ssl.client_cert_conf) || ++ data->phase2_eap_started) && ++ !data->phase2_eap_success) ++ return false; ++ return true; ++} ++ ++ + /** + * eap_tlv_process - Process a received EAP-TLV message and generate a response + * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() +@@ -568,6 +597,11 @@ static int eap_tlv_process(struct eap_sm *sm, struct eap_peap_data *data, + " - force failed Phase 2"); + resp_status = EAP_TLV_RESULT_FAILURE; + ret->decision = DECISION_FAIL; ++ } else if (!peap_phase2_sufficient(sm, data)) { ++ wpa_printf(MSG_INFO, ++ "EAP-PEAP: Server indicated Phase 2 success, but sufficient Phase 2 authentication has not been completed"); ++ resp_status = EAP_TLV_RESULT_FAILURE; ++ ret->decision = DECISION_FAIL; + } else { + resp_status = EAP_TLV_RESULT_SUCCESS; + ret->decision = DECISION_UNCOND_SUCC; +@@ -887,8 +921,7 @@ continue_req: + /* EAP-Success within TLS tunnel is used to indicate + * shutdown of the TLS channel. The authentication has + * been completed. */ +- if (data->phase2_eap_started && +- !data->phase2_eap_success) { ++ if (!peap_phase2_sufficient(sm, data)) { + wpa_printf(MSG_DEBUG, "EAP-PEAP: Phase 2 " + "Success used to indicate success, " + "but Phase 2 EAP was not yet " +@@ -1199,8 +1232,9 @@ static struct wpabuf * eap_peap_process(struct eap_sm *sm, void *priv, + static bool eap_peap_has_reauth_data(struct eap_sm *sm, void *priv) + { + struct eap_peap_data *data = priv; ++ + return tls_connection_established(sm->ssl_ctx, data->ssl.conn) && +- data->phase2_success; ++ data->phase2_success && data->phase2_auth != ALWAYS; + } + + +diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c +index c1837db..a53eeb1 100644 +--- a/src/eap_peer/eap_tls_common.c ++++ b/src/eap_peer/eap_tls_common.c +@@ -239,6 +239,12 @@ static int eap_tls_params_from_conf(struct eap_sm *sm, + + sm->ext_cert_check = !!(params->flags & TLS_CONN_EXT_CERT_CHECK); + ++ if (!phase2) ++ data->client_cert_conf = params->client_cert || ++ params->client_cert_blob || ++ params->private_key || ++ params->private_key_blob; ++ + return 0; + } + +diff --git a/src/eap_peer/eap_tls_common.h b/src/eap_peer/eap_tls_common.h +index 9ac0012..3348634 100644 +--- a/src/eap_peer/eap_tls_common.h ++++ b/src/eap_peer/eap_tls_common.h +@@ -79,6 +79,11 @@ struct eap_ssl_data { + * tls_v13 - Whether TLS v1.3 or newer is used + */ + int tls_v13; ++ ++ /** ++ * client_cert_conf: Whether client certificate has been configured ++ */ ++ bool client_cert_conf; + }; + + +diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf +index 6619d6b..d63f73c 100644 +--- a/wpa_supplicant/wpa_supplicant.conf ++++ b/wpa_supplicant/wpa_supplicant.conf +@@ -1321,6 +1321,13 @@ fast_reauth=1 + # * 0 = do not use cryptobinding (default) + # * 1 = use cryptobinding if server supports it + # * 2 = require cryptobinding ++# 'phase2_auth' option can be used to control Phase 2 (i.e., within TLS ++# tunnel) behavior for PEAP: ++# * 0 = do not require Phase 2 authentication ++# * 1 = require Phase 2 authentication when client certificate ++# (private_key/client_cert) is no used and TLS session resumption was ++# not used (default) ++# * 2 = require Phase 2 authentication in all cases + # EAP-WSC (WPS) uses following options: pin=<Device Password> or + # pbc=1. + # diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch new file mode 100644 index 0000000000..6e930fc98d --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch @@ -0,0 +1,73 @@ +From cb41c214b78d6df187a31950342e48a403dbd769 Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich <geomatsi@gmail.com> +Date: Tue, 22 Feb 2022 11:52:19 +0300 +Subject: [PATCH 1/2] build: Re-enable options for libwpa_client.so and + wpa_passphrase + +Commit a41a29192e5d ("build: Pull common fragments into a build.rules +file") introduced a regression into wpa_supplicant build process. The +build target libwpa_client.so is not built regardless of whether the +option CONFIG_BUILD_WPA_CLIENT_SO is set or not. This happens because +this config option is used before it is imported from the configuration +file. Moving its use after including build.rules does not help: the +variable ALL is processed by build.rules and further changes are not +applied. Similarly, option CONFIG_NO_WPA_PASSPHRASE also does not work +as expected: wpa_passphrase is always built regardless of whether the +option is set or not. + +Re-enable these options by adding both build targets to _all +dependencies. + +Fixes: a41a29192e5d ("build: Pull common fragments into a build.rules file") +Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> +Upstream-Status: Backport +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alexk@gmail.com> +--- + wpa_supplicant/Makefile | 19 ++++++++++++------- + 1 file changed, 12 insertions(+), 7 deletions(-) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index cb66defac7c8..c456825ae75f 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -1,24 +1,29 @@ + BINALL=wpa_supplicant wpa_cli + +-ifndef CONFIG_NO_WPA_PASSPHRASE +-BINALL += wpa_passphrase +-endif +- + ALL = $(BINALL) + ALL += systemd/wpa_supplicant.service + ALL += systemd/wpa_supplicant@.service + ALL += systemd/wpa_supplicant-nl80211@.service + ALL += systemd/wpa_supplicant-wired@.service + ALL += dbus/fi.w1.wpa_supplicant1.service +-ifdef CONFIG_BUILD_WPA_CLIENT_SO +-ALL += libwpa_client.so +-endif + + EXTRA_TARGETS=dynamic_eap_methods + + CONFIG_FILE=.config + include ../src/build.rules + ++ifdef CONFIG_BUILD_WPA_CLIENT_SO ++# add the dependency this way to allow CONFIG_BUILD_WPA_CLIENT_SO ++# being set in the config which is read by build.rules ++_all: libwpa_client.so ++endif ++ ++ifndef CONFIG_NO_WPA_PASSPHRASE ++# add the dependency this way to allow CONFIG_NO_WPA_PASSPHRASE ++# being set in the config which is read by build.rules ++_all: wpa_passphrase ++endif ++ + ifdef LIBS + # If LIBS is set with some global build system defaults, clone those for + # LIBS_c and LIBS_p to cover wpa_passphrase and wpa_cli as well. +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch new file mode 100644 index 0000000000..53b0fcdf53 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch @@ -0,0 +1,26 @@ +From d001b301ba7987f4b39453a211631b85c48f2ff8 Mon Sep 17 00:00:00 2001 +From: Jouni Malinen <quic_jouni@quicinc.com> +Date: Thu, 3 Mar 2022 13:26:42 +0200 +Subject: [PATCH 2/2] Fix removal of wpa_passphrase on 'make clean' + +Fixes: 0430bc8267b4 ("build: Add a common-clean target") +Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com> +Upstream-Status: Backport +Signed-off-by: Alex Kiernan <alexk@zuma.ai> +Signed-off-by: Alex Kiernan <alexk@gmail.com> +--- + wpa_supplicant/Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile +index c456825ae75f..4b4688931b1d 100644 +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -2077,3 +2077,4 @@ clean: common-clean + rm -f libwpa_client.a + rm -f libwpa_client.so + rm -f libwpa_test1 libwpa_test2 ++ rm -f wpa_passphrase +-- +2.35.1 + diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig deleted file mode 100644 index f04e398fdb..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig +++ /dev/null @@ -1,552 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -# Note: WEXT is deprecated in the current Linux kernel version and no new -# functionality is added to it. nl80211-based interface is the new -# replacement for WEXT and its use allows wpa_supplicant to properly control -# the driver to improve existing functionality like roaming and to support new -# functionality. -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -CONFIG_LIBNL32=y - - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd (secure authentication using only a password) -#CONFIG_EAP_PWD=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable WSC 2.0 support -#CONFIG_WPS2=y -# Enable WPS external registrar functionality -#CONFIG_WPS_ER=y -# Disable credentials for an open network by default when acting as a WPS -# registrar. -#CONFIG_WPS_REG_DISABLE_OPEN=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# EAP-EKE -#CONFIG_EAP_EKE=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) -#CONFIG_HT_OVERRIDES=y - -# Support VHT overrides (disable VHT, mask MCS rates, etc.) -#CONFIG_VHT_OVERRIDES=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# udp-remote = UDP sockets with remote access (only for tests systems/purpose) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Include internal line edit mode in wpa_cli. This can be used as a replacement -# for GNU Readline to provide limited command line editing and history support. -#CONFIG_WPA_CLI_EDIT=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -#CONFIG_ELOOP=eloop - -# Should we use poll instead of select? Select is used by default. -#CONFIG_ELOOP_POLL=y - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection), also known as PMF -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. It should be noted that some existing TLS v1.0 -based -# implementation may not be compatible with TLS v1.1 message (ClientHello is -# sent prior to negotiating which version will be used) -#CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. It should be -# noted that some existing TLS v1.0 -based implementation may not be compatible -# with TLS v1.2 message (ClientHello is sent prior to negotiating which version -# will be used) -#CONFIG_TLSV12=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Send debug messages to syslog instead of stdout -#CONFIG_DEBUG_SYSLOG=y -# Set syslog facility for debug messages -#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, uncomment these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, uncomment these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -CONFIG_TLS = %ssl% -CONFIG_CTRL_IFACE_DBUS=y -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# wpa_supplicant depends on strong random number generation being available -# from the operating system. os_get_random() function is used to fetch random -# data when needed, e.g., for key generation. On Linux and BSD systems, this -# works by reading /dev/urandom. It should be noted that the OS entropy pool -# needs to be properly initialized before wpa_supplicant is started. This is -# important especially on embedded devices that do not have a hardware random -# number generator and may by default start up with minimal entropy available -# for random number generation. -# -# As a safety net, wpa_supplicant is by default trying to internally collect -# additional entropy for generating random data to mix in with the data fetched -# from the OS. This by itself is not considered to be very strong, but it may -# help in cases where the system pool is not initialized properly. However, it -# is very strongly recommended that the system pool is initialized with enough -# entropy either by using hardware assisted random number generator or by -# storing state over device reboots. -# -# wpa_supplicant can be configured to maintain its own entropy store over -# restarts to enhance random number generation. This is not perfect, but it is -# much more secure than using the same sequence of random numbers after every -# reboot. This can be enabled with -e<entropy file> command line option. The -# specified file needs to be readable and writable by wpa_supplicant. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal wpa_supplicant random pool can be -# disabled. This will save some in binary size and CPU use. However, this -# should only be considered for builds that are known to be used on devices -# that meet the requirements described above. -#CONFIG_NO_RANDOM_POOL=y - -# IEEE 802.11n (High Throughput) support (mainly for AP mode) -#CONFIG_IEEE80211N=y - -# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) -# (depends on CONFIG_IEEE80211N) -#CONFIG_IEEE80211AC=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks (GAS/ANQP to learn more about the networks and network -# selection based on available credentials). -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# Disable roaming in wpa_supplicant -#CONFIG_NO_ROAMING=y - -# AP mode operations with wpa_supplicant -# This can be used for controlling AP mode operations with wpa_supplicant. It -# should be noted that this is mainly aimed at simple cases like -# WPA2-Personal while more complex configurations like WPA2-Enterprise with an -# external RADIUS server can be supported with hostapd. -CONFIG_AP=y - -CONFIG_BGSCAN_SIMPLE=y - -# P2P (Wi-Fi Direct) -# This can be used to enable P2P support in wpa_supplicant. See README-P2P for -# more information on P2P operations. -#CONFIG_P2P=y - -# Enable TDLS support -#CONFIG_TDLS=y - -# Wi-Fi Direct -# This can be used to enable Wi-Fi Direct extensions for P2P using an external -# program to control the additional information exchanges in the messages. -#CONFIG_WIFI_DISPLAY=y - -# Autoscan -# This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. -# -# Enabling directly a module will enable autoscan support. -# For exponential module: -CONFIG_AUTOSCAN_EXPONENTIAL=y -# For periodic module: -#CONFIG_AUTOSCAN_PERIODIC=y - -# Password (and passphrase, etc.) backend for external storage -# These optional mechanisms can be used to add support for storing passwords -# and other secrets in external (to wpa_supplicant) location. This allows, for -# example, operating system specific key storage to be used -# -# External password backend for testing purposes (developer use) -#CONFIG_EXT_PASSWORD_TEST=y diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/key-replay-cve-multiple.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/key-replay-cve-multiple.patch deleted file mode 100644 index 436520fe64..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/key-replay-cve-multiple.patch +++ /dev/null @@ -1,1025 +0,0 @@ -The WPA2 four-way handshake protocol is vulnerable to replay attacks which can -result in unauthenticated clients gaining access to the network. - -Backport a number of patches from upstream to fix this. - -CVE: CVE-2017-13077 -CVE: CVE-2017-13078 -CVE: CVE-2017-13079 -CVE: CVE-2017-13080 -CVE: CVE-2017-13081 -CVE: CVE-2017-13082 -CVE: CVE-2017-13086 -CVE: CVE-2017-13087 -CVE: CVE-2017-13088 - -Upstream-Status: Backport -Signed-off-by: Ross Burton <ross.burton@intel.com> - -From cf4cab804c7afd5c45505528a8d16e46163243a2 Mon Sep 17 00:00:00 2001 -From: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> -Date: Fri, 14 Jul 2017 15:15:35 +0200 -Subject: [PATCH 1/8] hostapd: Avoid key reinstallation in FT handshake - -Do not reinstall TK to the driver during Reassociation Response frame -processing if the first attempt of setting the TK succeeded. This avoids -issues related to clearing the TX/RX PN that could result in reusing -same PN values for transmitted frames (e.g., due to CCM nonce reuse and -also hitting replay protection on the receiver) and accepting replayed -frames on RX side. - -This issue was introduced by the commit -0e84c25434e6a1f283c7b4e62e483729085b78d2 ('FT: Fix PTK configuration in -authenticator') which allowed wpa_ft_install_ptk() to be called multiple -times with the same PTK. While the second configuration attempt is -needed with some drivers, it must be done only if the first attempt -failed. - -Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> ---- - src/ap/ieee802_11.c | 16 +++++++++++++--- - src/ap/wpa_auth.c | 11 +++++++++++ - src/ap/wpa_auth.h | 3 ++- - src/ap/wpa_auth_ft.c | 10 ++++++++++ - src/ap/wpa_auth_i.h | 1 + - 5 files changed, 37 insertions(+), 4 deletions(-) - -diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c -index 4e04169..333035f 100644 ---- a/src/ap/ieee802_11.c -+++ b/src/ap/ieee802_11.c -@@ -1841,6 +1841,7 @@ static int add_associated_sta(struct hostapd_data *hapd, - { - struct ieee80211_ht_capabilities ht_cap; - struct ieee80211_vht_capabilities vht_cap; -+ int set = 1; - - /* - * Remove the STA entry to ensure the STA PS state gets cleared and -@@ -1848,9 +1849,18 @@ static int add_associated_sta(struct hostapd_data *hapd, - * FT-over-the-DS, where a station re-associates back to the same AP but - * skips the authentication flow, or if working with a driver that - * does not support full AP client state. -+ * -+ * Skip this if the STA has already completed FT reassociation and the -+ * TK has been configured since the TX/RX PN must not be reset to 0 for -+ * the same key. - */ -- if (!sta->added_unassoc) -+ if (!sta->added_unassoc && -+ (!(sta->flags & WLAN_STA_AUTHORIZED) || -+ !wpa_auth_sta_ft_tk_already_set(sta->wpa_sm))) { - hostapd_drv_sta_remove(hapd, sta->addr); -+ wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED); -+ set = 0; -+ } - - #ifdef CONFIG_IEEE80211N - if (sta->flags & WLAN_STA_HT) -@@ -1873,11 +1883,11 @@ static int add_associated_sta(struct hostapd_data *hapd, - sta->flags & WLAN_STA_VHT ? &vht_cap : NULL, - sta->flags | WLAN_STA_ASSOC, sta->qosinfo, - sta->vht_opmode, sta->p2p_ie ? 1 : 0, -- sta->added_unassoc)) { -+ set)) { - hostapd_logger(hapd, sta->addr, - HOSTAPD_MODULE_IEEE80211, HOSTAPD_LEVEL_NOTICE, - "Could not %s STA to kernel driver", -- sta->added_unassoc ? "set" : "add"); -+ set ? "set" : "add"); - - if (sta->added_unassoc) { - hostapd_drv_sta_remove(hapd, sta->addr); -diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c -index 3587086..707971d 100644 ---- a/src/ap/wpa_auth.c -+++ b/src/ap/wpa_auth.c -@@ -1745,6 +1745,9 @@ int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event) - #else /* CONFIG_IEEE80211R */ - break; - #endif /* CONFIG_IEEE80211R */ -+ case WPA_DRV_STA_REMOVED: -+ sm->tk_already_set = FALSE; -+ return 0; - } - - #ifdef CONFIG_IEEE80211R -@@ -3250,6 +3253,14 @@ int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm) - } - - -+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm) -+{ -+ if (!sm || !wpa_key_mgmt_ft(sm->wpa_key_mgmt)) -+ return 0; -+ return sm->tk_already_set; -+} -+ -+ - int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm, - struct rsn_pmksa_cache_entry *entry) - { -diff --git a/src/ap/wpa_auth.h b/src/ap/wpa_auth.h -index 0de8d97..97461b0 100644 ---- a/src/ap/wpa_auth.h -+++ b/src/ap/wpa_auth.h -@@ -267,7 +267,7 @@ void wpa_receive(struct wpa_authenticator *wpa_auth, - u8 *data, size_t data_len); - enum wpa_event { - WPA_AUTH, WPA_ASSOC, WPA_DISASSOC, WPA_DEAUTH, WPA_REAUTH, -- WPA_REAUTH_EAPOL, WPA_ASSOC_FT -+ WPA_REAUTH_EAPOL, WPA_ASSOC_FT, WPA_DRV_STA_REMOVED - }; - void wpa_remove_ptk(struct wpa_state_machine *sm); - int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event); -@@ -280,6 +280,7 @@ int wpa_auth_pairwise_set(struct wpa_state_machine *sm); - int wpa_auth_get_pairwise(struct wpa_state_machine *sm); - int wpa_auth_sta_key_mgmt(struct wpa_state_machine *sm); - int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm); -+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm); - int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm, - struct rsn_pmksa_cache_entry *entry); - struct rsn_pmksa_cache_entry * -diff --git a/src/ap/wpa_auth_ft.c b/src/ap/wpa_auth_ft.c -index 42242a5..e63b99a 100644 ---- a/src/ap/wpa_auth_ft.c -+++ b/src/ap/wpa_auth_ft.c -@@ -780,6 +780,14 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm) - return; - } - -+ if (sm->tk_already_set) { -+ /* Must avoid TK reconfiguration to prevent clearing of TX/RX -+ * PN in the driver */ -+ wpa_printf(MSG_DEBUG, -+ "FT: Do not re-install same PTK to the driver"); -+ return; -+ } -+ - /* FIX: add STA entry to kernel/driver here? The set_key will fail - * most likely without this.. At the moment, STA entry is added only - * after association has been completed. This function will be called -@@ -792,6 +800,7 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm) - - /* FIX: MLME-SetProtection.Request(TA, Tx_Rx) */ - sm->pairwise_set = TRUE; -+ sm->tk_already_set = TRUE; - } - - -@@ -898,6 +907,7 @@ static int wpa_ft_process_auth_req(struct wpa_state_machine *sm, - - sm->pairwise = pairwise; - sm->PTK_valid = TRUE; -+ sm->tk_already_set = FALSE; - wpa_ft_install_ptk(sm); - - buflen = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) + -diff --git a/src/ap/wpa_auth_i.h b/src/ap/wpa_auth_i.h -index 72b7eb3..7fd8f05 100644 ---- a/src/ap/wpa_auth_i.h -+++ b/src/ap/wpa_auth_i.h -@@ -65,6 +65,7 @@ struct wpa_state_machine { - struct wpa_ptk PTK; - Boolean PTK_valid; - Boolean pairwise_set; -+ Boolean tk_already_set; - int keycount; - Boolean Pair; - struct wpa_key_replay_counter { --- -2.7.4 - -From 927f891007c402fefd1ff384645b3f07597c3ede Mon Sep 17 00:00:00 2001 -From: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> -Date: Wed, 12 Jul 2017 16:03:24 +0200 -Subject: [PATCH 2/8] Prevent reinstallation of an already in-use group key - -Track the current GTK and IGTK that is in use and when receiving a -(possibly retransmitted) Group Message 1 or WNM-Sleep Mode Response, do -not install the given key if it is already in use. This prevents an -attacker from trying to trick the client into resetting or lowering the -sequence counter associated to the group key. - -Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> ---- - src/common/wpa_common.h | 11 +++++ - src/rsn_supp/wpa.c | 116 ++++++++++++++++++++++++++++++------------------ - src/rsn_supp/wpa_i.h | 4 ++ - 3 files changed, 87 insertions(+), 44 deletions(-) - -diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h -index af1d0f0..d200285 100644 ---- a/src/common/wpa_common.h -+++ b/src/common/wpa_common.h -@@ -217,6 +217,17 @@ struct wpa_ptk { - size_t tk_len; - }; - -+struct wpa_gtk { -+ u8 gtk[WPA_GTK_MAX_LEN]; -+ size_t gtk_len; -+}; -+ -+#ifdef CONFIG_IEEE80211W -+struct wpa_igtk { -+ u8 igtk[WPA_IGTK_MAX_LEN]; -+ size_t igtk_len; -+}; -+#endif /* CONFIG_IEEE80211W */ - - /* WPA IE version 1 - * 00-50-f2:1 (OUI:OUI type) -diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c -index 3c47879..95bd7be 100644 ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -714,6 +714,15 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, - const u8 *_gtk = gd->gtk; - u8 gtk_buf[32]; - -+ /* Detect possible key reinstallation */ -+ if (sm->gtk.gtk_len == (size_t) gd->gtk_len && -+ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) { -+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, -+ "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)", -+ gd->keyidx, gd->tx, gd->gtk_len); -+ return 0; -+ } -+ - wpa_hexdump_key(MSG_DEBUG, "WPA: Group Key", gd->gtk, gd->gtk_len); - wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, - "WPA: Installing GTK to the driver (keyidx=%d tx=%d len=%d)", -@@ -748,6 +757,9 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, - } - os_memset(gtk_buf, 0, sizeof(gtk_buf)); - -+ sm->gtk.gtk_len = gd->gtk_len; -+ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); -+ - return 0; - } - -@@ -854,6 +866,48 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, - } - - -+#ifdef CONFIG_IEEE80211W -+static int wpa_supplicant_install_igtk(struct wpa_sm *sm, -+ const struct wpa_igtk_kde *igtk) -+{ -+ size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); -+ u16 keyidx = WPA_GET_LE16(igtk->keyid); -+ -+ /* Detect possible key reinstallation */ -+ if (sm->igtk.igtk_len == len && -+ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) { -+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, -+ "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)", -+ keyidx); -+ return 0; -+ } -+ -+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, -+ "WPA: IGTK keyid %d pn %02x%02x%02x%02x%02x%02x", -+ keyidx, MAC2STR(igtk->pn)); -+ wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", igtk->igtk, len); -+ if (keyidx > 4095) { -+ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, -+ "WPA: Invalid IGTK KeyID %d", keyidx); -+ return -1; -+ } -+ if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), -+ broadcast_ether_addr, -+ keyidx, 0, igtk->pn, sizeof(igtk->pn), -+ igtk->igtk, len) < 0) { -+ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, -+ "WPA: Failed to configure IGTK to the driver"); -+ return -1; -+ } -+ -+ sm->igtk.igtk_len = len; -+ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); -+ -+ return 0; -+} -+#endif /* CONFIG_IEEE80211W */ -+ -+ - static int ieee80211w_set_keys(struct wpa_sm *sm, - struct wpa_eapol_ie_parse *ie) - { -@@ -864,30 +918,14 @@ static int ieee80211w_set_keys(struct wpa_sm *sm, - if (ie->igtk) { - size_t len; - const struct wpa_igtk_kde *igtk; -- u16 keyidx; -+ - len = wpa_cipher_key_len(sm->mgmt_group_cipher); - if (ie->igtk_len != WPA_IGTK_KDE_PREFIX_LEN + len) - return -1; -+ - igtk = (const struct wpa_igtk_kde *) ie->igtk; -- keyidx = WPA_GET_LE16(igtk->keyid); -- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: IGTK keyid %d " -- "pn %02x%02x%02x%02x%02x%02x", -- keyidx, MAC2STR(igtk->pn)); -- wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", -- igtk->igtk, len); -- if (keyidx > 4095) { -- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, -- "WPA: Invalid IGTK KeyID %d", keyidx); -- return -1; -- } -- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), -- broadcast_ether_addr, -- keyidx, 0, igtk->pn, sizeof(igtk->pn), -- igtk->igtk, len) < 0) { -- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING, -- "WPA: Failed to configure IGTK to the driver"); -+ if (wpa_supplicant_install_igtk(sm, igtk) < 0) - return -1; -- } - } - - return 0; -@@ -2307,7 +2345,7 @@ void wpa_sm_deinit(struct wpa_sm *sm) - */ - void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) - { -- int clear_ptk = 1; -+ int clear_keys = 1; - - if (sm == NULL) - return; -@@ -2333,11 +2371,11 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) - /* Prepare for the next transition */ - wpa_ft_prepare_auth_request(sm, NULL); - -- clear_ptk = 0; -+ clear_keys = 0; - } - #endif /* CONFIG_IEEE80211R */ - -- if (clear_ptk) { -+ if (clear_keys) { - /* - * IEEE 802.11, 8.4.10: Delete PTK SA on (re)association if - * this is not part of a Fast BSS Transition. -@@ -2347,6 +2385,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) - os_memset(&sm->ptk, 0, sizeof(sm->ptk)); - sm->tptk_set = 0; - os_memset(&sm->tptk, 0, sizeof(sm->tptk)); -+ os_memset(&sm->gtk, 0, sizeof(sm->gtk)); -+#ifdef CONFIG_IEEE80211W -+ os_memset(&sm->igtk, 0, sizeof(sm->igtk)); -+#endif /* CONFIG_IEEE80211W */ - } - - #ifdef CONFIG_TDLS -@@ -2877,6 +2919,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm) - os_memset(sm->pmk, 0, sizeof(sm->pmk)); - os_memset(&sm->ptk, 0, sizeof(sm->ptk)); - os_memset(&sm->tptk, 0, sizeof(sm->tptk)); -+ os_memset(&sm->gtk, 0, sizeof(sm->gtk)); -+#ifdef CONFIG_IEEE80211W -+ os_memset(&sm->igtk, 0, sizeof(sm->igtk)); -+#endif /* CONFIG_IEEE80211W */ - #ifdef CONFIG_IEEE80211R - os_memset(sm->xxkey, 0, sizeof(sm->xxkey)); - os_memset(sm->pmk_r0, 0, sizeof(sm->pmk_r0)); -@@ -2949,29 +2995,11 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) - os_memset(&gd, 0, sizeof(gd)); - #ifdef CONFIG_IEEE80211W - } else if (subelem_id == WNM_SLEEP_SUBELEM_IGTK) { -- struct wpa_igtk_kde igd; -- u16 keyidx; -- -- os_memset(&igd, 0, sizeof(igd)); -- keylen = wpa_cipher_key_len(sm->mgmt_group_cipher); -- os_memcpy(igd.keyid, buf + 2, 2); -- os_memcpy(igd.pn, buf + 4, 6); -- -- keyidx = WPA_GET_LE16(igd.keyid); -- os_memcpy(igd.igtk, buf + 10, keylen); -- -- wpa_hexdump_key(MSG_DEBUG, "Install IGTK (WNM SLEEP)", -- igd.igtk, keylen); -- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher), -- broadcast_ether_addr, -- keyidx, 0, igd.pn, sizeof(igd.pn), -- igd.igtk, keylen) < 0) { -- wpa_printf(MSG_DEBUG, "Failed to install the IGTK in " -- "WNM mode"); -- os_memset(&igd, 0, sizeof(igd)); -+ const struct wpa_igtk_kde *igtk; -+ -+ igtk = (const struct wpa_igtk_kde *) (buf + 2); -+ if (wpa_supplicant_install_igtk(sm, igtk) < 0) - return -1; -- } -- os_memset(&igd, 0, sizeof(igd)); - #endif /* CONFIG_IEEE80211W */ - } else { - wpa_printf(MSG_DEBUG, "Unknown element id"); -diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h -index f653ba6..afc9e37 100644 ---- a/src/rsn_supp/wpa_i.h -+++ b/src/rsn_supp/wpa_i.h -@@ -31,6 +31,10 @@ struct wpa_sm { - u8 rx_replay_counter[WPA_REPLAY_COUNTER_LEN]; - int rx_replay_counter_set; - u8 request_counter[WPA_REPLAY_COUNTER_LEN]; -+ struct wpa_gtk gtk; -+#ifdef CONFIG_IEEE80211W -+ struct wpa_igtk igtk; -+#endif /* CONFIG_IEEE80211W */ - - struct eapol_sm *eapol; /* EAPOL state machine from upper level code */ - --- -2.7.4 - -From 8280294e74846ea342389a0cd17215050fa5afe8 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Sun, 1 Oct 2017 12:12:24 +0300 -Subject: [PATCH 3/8] Extend protection of GTK/IGTK reinstallation of WNM-Sleep - Mode cases - -This extends the protection to track last configured GTK/IGTK value -separately from EAPOL-Key frames and WNM-Sleep Mode frames to cover a -corner case where these two different mechanisms may get used when the -GTK/IGTK has changed and tracking a single value is not sufficient to -detect a possible key reconfiguration. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/rsn_supp/wpa.c | 53 +++++++++++++++++++++++++++++++++++++--------------- - src/rsn_supp/wpa_i.h | 2 ++ - 2 files changed, 40 insertions(+), 15 deletions(-) - -diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c -index 95bd7be..7a2c68d 100644 ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -709,14 +709,17 @@ struct wpa_gtk_data { - - static int wpa_supplicant_install_gtk(struct wpa_sm *sm, - const struct wpa_gtk_data *gd, -- const u8 *key_rsc) -+ const u8 *key_rsc, int wnm_sleep) - { - const u8 *_gtk = gd->gtk; - u8 gtk_buf[32]; - - /* Detect possible key reinstallation */ -- if (sm->gtk.gtk_len == (size_t) gd->gtk_len && -- os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) { -+ if ((sm->gtk.gtk_len == (size_t) gd->gtk_len && -+ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) || -+ (sm->gtk_wnm_sleep.gtk_len == (size_t) gd->gtk_len && -+ os_memcmp(sm->gtk_wnm_sleep.gtk, gd->gtk, -+ sm->gtk_wnm_sleep.gtk_len) == 0)) { - wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, - "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)", - gd->keyidx, gd->tx, gd->gtk_len); -@@ -757,8 +760,14 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm, - } - os_memset(gtk_buf, 0, sizeof(gtk_buf)); - -- sm->gtk.gtk_len = gd->gtk_len; -- os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); -+ if (wnm_sleep) { -+ sm->gtk_wnm_sleep.gtk_len = gd->gtk_len; -+ os_memcpy(sm->gtk_wnm_sleep.gtk, gd->gtk, -+ sm->gtk_wnm_sleep.gtk_len); -+ } else { -+ sm->gtk.gtk_len = gd->gtk_len; -+ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len); -+ } - - return 0; - } -@@ -852,7 +861,7 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, - (wpa_supplicant_check_group_cipher(sm, sm->group_cipher, - gtk_len, gtk_len, - &gd.key_rsc_len, &gd.alg) || -- wpa_supplicant_install_gtk(sm, &gd, key_rsc))) { -+ wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0))) { - wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, - "RSN: Failed to install GTK"); - os_memset(&gd, 0, sizeof(gd)); -@@ -868,14 +877,18 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm, - - #ifdef CONFIG_IEEE80211W - static int wpa_supplicant_install_igtk(struct wpa_sm *sm, -- const struct wpa_igtk_kde *igtk) -+ const struct wpa_igtk_kde *igtk, -+ int wnm_sleep) - { - size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher); - u16 keyidx = WPA_GET_LE16(igtk->keyid); - - /* Detect possible key reinstallation */ -- if (sm->igtk.igtk_len == len && -- os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) { -+ if ((sm->igtk.igtk_len == len && -+ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) || -+ (sm->igtk_wnm_sleep.igtk_len == len && -+ os_memcmp(sm->igtk_wnm_sleep.igtk, igtk->igtk, -+ sm->igtk_wnm_sleep.igtk_len) == 0)) { - wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, - "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)", - keyidx); -@@ -900,8 +913,14 @@ static int wpa_supplicant_install_igtk(struct wpa_sm *sm, - return -1; - } - -- sm->igtk.igtk_len = len; -- os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); -+ if (wnm_sleep) { -+ sm->igtk_wnm_sleep.igtk_len = len; -+ os_memcpy(sm->igtk_wnm_sleep.igtk, igtk->igtk, -+ sm->igtk_wnm_sleep.igtk_len); -+ } else { -+ sm->igtk.igtk_len = len; -+ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len); -+ } - - return 0; - } -@@ -924,7 +943,7 @@ static int ieee80211w_set_keys(struct wpa_sm *sm, - return -1; - - igtk = (const struct wpa_igtk_kde *) ie->igtk; -- if (wpa_supplicant_install_igtk(sm, igtk) < 0) -+ if (wpa_supplicant_install_igtk(sm, igtk, 0) < 0) - return -1; - } - -@@ -1574,7 +1593,7 @@ static void wpa_supplicant_process_1_of_2(struct wpa_sm *sm, - if (wpa_supplicant_rsc_relaxation(sm, key->key_rsc)) - key_rsc = null_rsc; - -- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc) || -+ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0) || - wpa_supplicant_send_2_of_2(sm, key, ver, key_info) < 0) - goto failed; - os_memset(&gd, 0, sizeof(gd)); -@@ -2386,8 +2405,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid) - sm->tptk_set = 0; - os_memset(&sm->tptk, 0, sizeof(sm->tptk)); - os_memset(&sm->gtk, 0, sizeof(sm->gtk)); -+ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); - #ifdef CONFIG_IEEE80211W - os_memset(&sm->igtk, 0, sizeof(sm->igtk)); -+ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); - #endif /* CONFIG_IEEE80211W */ - } - -@@ -2920,8 +2941,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm) - os_memset(&sm->ptk, 0, sizeof(sm->ptk)); - os_memset(&sm->tptk, 0, sizeof(sm->tptk)); - os_memset(&sm->gtk, 0, sizeof(sm->gtk)); -+ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep)); - #ifdef CONFIG_IEEE80211W - os_memset(&sm->igtk, 0, sizeof(sm->igtk)); -+ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep)); - #endif /* CONFIG_IEEE80211W */ - #ifdef CONFIG_IEEE80211R - os_memset(sm->xxkey, 0, sizeof(sm->xxkey)); -@@ -2986,7 +3009,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) - - wpa_hexdump_key(MSG_DEBUG, "Install GTK (WNM SLEEP)", - gd.gtk, gd.gtk_len); -- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc)) { -+ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 1)) { - os_memset(&gd, 0, sizeof(gd)); - wpa_printf(MSG_DEBUG, "Failed to install the GTK in " - "WNM mode"); -@@ -2998,7 +3021,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf) - const struct wpa_igtk_kde *igtk; - - igtk = (const struct wpa_igtk_kde *) (buf + 2); -- if (wpa_supplicant_install_igtk(sm, igtk) < 0) -+ if (wpa_supplicant_install_igtk(sm, igtk, 1) < 0) - return -1; - #endif /* CONFIG_IEEE80211W */ - } else { -diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h -index afc9e37..9a54631 100644 ---- a/src/rsn_supp/wpa_i.h -+++ b/src/rsn_supp/wpa_i.h -@@ -32,8 +32,10 @@ struct wpa_sm { - int rx_replay_counter_set; - u8 request_counter[WPA_REPLAY_COUNTER_LEN]; - struct wpa_gtk gtk; -+ struct wpa_gtk gtk_wnm_sleep; - #ifdef CONFIG_IEEE80211W - struct wpa_igtk igtk; -+ struct wpa_igtk igtk_wnm_sleep; - #endif /* CONFIG_IEEE80211W */ - - struct eapol_sm *eapol; /* EAPOL state machine from upper level code */ --- -2.7.4 - -From 8f82bc94e8697a9d47fa8774dfdaaede1084912c Mon Sep 17 00:00:00 2001 -From: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> -Date: Fri, 29 Sep 2017 04:22:51 +0200 -Subject: [PATCH 4/8] Prevent installation of an all-zero TK - -Properly track whether a PTK has already been installed to the driver -and the TK part cleared from memory. This prevents an attacker from -trying to trick the client into installing an all-zero TK. - -This fixes the earlier fix in commit -ad00d64e7d8827b3cebd665a0ceb08adabf15e1e ('Fix TK configuration to the -driver in EAPOL-Key 3/4 retry case') which did not take into account -possibility of an extra message 1/4 showing up between retries of -message 3/4. - -Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be> ---- - src/common/wpa_common.h | 1 + - src/rsn_supp/wpa.c | 5 ++--- - src/rsn_supp/wpa_i.h | 1 - - 3 files changed, 3 insertions(+), 4 deletions(-) - -diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h -index d200285..1021ccb 100644 ---- a/src/common/wpa_common.h -+++ b/src/common/wpa_common.h -@@ -215,6 +215,7 @@ struct wpa_ptk { - size_t kck_len; - size_t kek_len; - size_t tk_len; -+ int installed; /* 1 if key has already been installed to driver */ - }; - - struct wpa_gtk { -diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c -index 7a2c68d..0550a41 100644 ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -510,7 +510,6 @@ static void wpa_supplicant_process_1_of_4(struct wpa_sm *sm, - os_memset(buf, 0, sizeof(buf)); - } - sm->tptk_set = 1; -- sm->tk_to_set = 1; - - kde = sm->assoc_wpa_ie; - kde_len = sm->assoc_wpa_ie_len; -@@ -615,7 +614,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm, - enum wpa_alg alg; - const u8 *key_rsc; - -- if (!sm->tk_to_set) { -+ if (sm->ptk.installed) { - wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, - "WPA: Do not re-install same PTK to the driver"); - return 0; -@@ -659,7 +658,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm, - - /* TK is not needed anymore in supplicant */ - os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN); -- sm->tk_to_set = 0; -+ sm->ptk.installed = 1; - - if (sm->wpa_ptk_rekey) { - eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL); -diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h -index 9a54631..41f371f 100644 ---- a/src/rsn_supp/wpa_i.h -+++ b/src/rsn_supp/wpa_i.h -@@ -24,7 +24,6 @@ struct wpa_sm { - struct wpa_ptk ptk, tptk; - int ptk_set, tptk_set; - unsigned int msg_3_of_4_ok:1; -- unsigned int tk_to_set:1; - u8 snonce[WPA_NONCE_LEN]; - u8 anonce[WPA_NONCE_LEN]; /* ANonce from the last 1/4 msg */ - int renew_snonce; --- -2.7.4 - -From 12fac09b437a1dc8a0f253e265934a8aaf4d2f8b Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Sun, 1 Oct 2017 12:32:57 +0300 -Subject: [PATCH 5/8] Fix PTK rekeying to generate a new ANonce - -The Authenticator state machine path for PTK rekeying ended up bypassing -the AUTHENTICATION2 state where a new ANonce is generated when going -directly to the PTKSTART state since there is no need to try to -determine the PMK again in such a case. This is far from ideal since the -new PTK would depend on a new nonce only from the supplicant. - -Fix this by generating a new ANonce when moving to the PTKSTART state -for the purpose of starting new 4-way handshake to rekey PTK. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/ap/wpa_auth.c | 24 +++++++++++++++++++++--- - 1 file changed, 21 insertions(+), 3 deletions(-) - -diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c -index 707971d..bf10cc1 100644 ---- a/src/ap/wpa_auth.c -+++ b/src/ap/wpa_auth.c -@@ -1901,6 +1901,21 @@ SM_STATE(WPA_PTK, AUTHENTICATION2) - } - - -+static int wpa_auth_sm_ptk_update(struct wpa_state_machine *sm) -+{ -+ if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) { -+ wpa_printf(MSG_ERROR, -+ "WPA: Failed to get random data for ANonce"); -+ sm->Disconnect = TRUE; -+ return -1; -+ } -+ wpa_hexdump(MSG_DEBUG, "WPA: Assign new ANonce", sm->ANonce, -+ WPA_NONCE_LEN); -+ sm->TimeoutCtr = 0; -+ return 0; -+} -+ -+ - SM_STATE(WPA_PTK, INITPMK) - { - u8 msk[2 * PMK_LEN]; -@@ -2458,9 +2473,12 @@ SM_STEP(WPA_PTK) - SM_ENTER(WPA_PTK, AUTHENTICATION); - else if (sm->ReAuthenticationRequest) - SM_ENTER(WPA_PTK, AUTHENTICATION2); -- else if (sm->PTKRequest) -- SM_ENTER(WPA_PTK, PTKSTART); -- else switch (sm->wpa_ptk_state) { -+ else if (sm->PTKRequest) { -+ if (wpa_auth_sm_ptk_update(sm) < 0) -+ SM_ENTER(WPA_PTK, DISCONNECTED); -+ else -+ SM_ENTER(WPA_PTK, PTKSTART); -+ } else switch (sm->wpa_ptk_state) { - case WPA_PTK_INITIALIZE: - break; - case WPA_PTK_DISCONNECT: --- -2.7.4 - -From 6c4bed4f47d1960ec04981a9d50e5076aea5223d Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Fri, 22 Sep 2017 11:03:15 +0300 -Subject: [PATCH 6/8] TDLS: Reject TPK-TK reconfiguration - -Do not try to reconfigure the same TPK-TK to the driver after it has -been successfully configured. This is an explicit check to avoid issues -related to resetting the TX/RX packet number. There was already a check -for this for TPK M2 (retries of that message are ignored completely), so -that behavior does not get modified. - -For TPK M3, the TPK-TK could have been reconfigured, but that was -followed by immediate teardown of the link due to an issue in updating -the STA entry. Furthermore, for TDLS with any real security (i.e., -ignoring open/WEP), the TPK message exchange is protected on the AP path -and simple replay attacks are not feasible. - -As an additional corner case, make sure the local nonce gets updated if -the peer uses a very unlikely "random nonce" of all zeros. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/rsn_supp/tdls.c | 38 ++++++++++++++++++++++++++++++++++++-- - 1 file changed, 36 insertions(+), 2 deletions(-) - -diff --git a/src/rsn_supp/tdls.c b/src/rsn_supp/tdls.c -index e424168..9eb9738 100644 ---- a/src/rsn_supp/tdls.c -+++ b/src/rsn_supp/tdls.c -@@ -112,6 +112,7 @@ struct wpa_tdls_peer { - u8 tk[16]; /* TPK-TK; assuming only CCMP will be used */ - } tpk; - int tpk_set; -+ int tk_set; /* TPK-TK configured to the driver */ - int tpk_success; - int tpk_in_progress; - -@@ -192,6 +193,20 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer) - u8 rsc[6]; - enum wpa_alg alg; - -+ if (peer->tk_set) { -+ /* -+ * This same TPK-TK has already been configured to the driver -+ * and this new configuration attempt (likely due to an -+ * unexpected retransmitted frame) would result in clearing -+ * the TX/RX sequence number which can break security, so must -+ * not allow that to happen. -+ */ -+ wpa_printf(MSG_INFO, "TDLS: TPK-TK for the peer " MACSTR -+ " has already been configured to the driver - do not reconfigure", -+ MAC2STR(peer->addr)); -+ return -1; -+ } -+ - os_memset(rsc, 0, 6); - - switch (peer->cipher) { -@@ -209,12 +224,15 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer) - return -1; - } - -+ wpa_printf(MSG_DEBUG, "TDLS: Configure pairwise key for peer " MACSTR, -+ MAC2STR(peer->addr)); - if (wpa_sm_set_key(sm, alg, peer->addr, -1, 1, - rsc, sizeof(rsc), peer->tpk.tk, key_len) < 0) { - wpa_printf(MSG_WARNING, "TDLS: Failed to set TPK to the " - "driver"); - return -1; - } -+ peer->tk_set = 1; - return 0; - } - -@@ -696,7 +714,7 @@ static void wpa_tdls_peer_clear(struct wpa_sm *sm, struct wpa_tdls_peer *peer) - peer->cipher = 0; - peer->qos_info = 0; - peer->wmm_capable = 0; -- peer->tpk_set = peer->tpk_success = 0; -+ peer->tk_set = peer->tpk_set = peer->tpk_success = 0; - peer->chan_switch_enabled = 0; - os_memset(&peer->tpk, 0, sizeof(peer->tpk)); - os_memset(peer->inonce, 0, WPA_NONCE_LEN); -@@ -1159,6 +1177,7 @@ skip_rsnie: - wpa_tdls_peer_free(sm, peer); - return -1; - } -+ peer->tk_set = 0; /* A new nonce results in a new TK */ - wpa_hexdump(MSG_DEBUG, "TDLS: Initiator Nonce for TPK handshake", - peer->inonce, WPA_NONCE_LEN); - os_memcpy(ftie->Snonce, peer->inonce, WPA_NONCE_LEN); -@@ -1751,6 +1770,19 @@ static int wpa_tdls_addset_peer(struct wpa_sm *sm, struct wpa_tdls_peer *peer, - } - - -+static int tdls_nonce_set(const u8 *nonce) -+{ -+ int i; -+ -+ for (i = 0; i < WPA_NONCE_LEN; i++) { -+ if (nonce[i]) -+ return 1; -+ } -+ -+ return 0; -+} -+ -+ - static int wpa_tdls_process_tpk_m1(struct wpa_sm *sm, const u8 *src_addr, - const u8 *buf, size_t len) - { -@@ -2004,7 +2036,8 @@ skip_rsn: - peer->rsnie_i_len = kde.rsn_ie_len; - peer->cipher = cipher; - -- if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0) { -+ if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0 || -+ !tdls_nonce_set(peer->inonce)) { - /* - * There is no point in updating the RNonce for every obtained - * TPK M1 frame (e.g., retransmission due to timeout) with the -@@ -2020,6 +2053,7 @@ skip_rsn: - "TDLS: Failed to get random data for responder nonce"); - goto error; - } -+ peer->tk_set = 0; /* A new nonce results in a new TK */ - } - - #if 0 --- -2.7.4 - -From 53c5eb58e95004f86e65ee9fbfccbc291b139057 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Fri, 22 Sep 2017 11:25:02 +0300 -Subject: [PATCH 7/8] WNM: Ignore WNM-Sleep Mode Response without pending - request - -Commit 03ed0a52393710be6bdae657d1b36efa146520e5 ('WNM: Ignore WNM-Sleep -Mode Response if WNM-Sleep Mode has not been used') started ignoring the -response when no WNM-Sleep Mode Request had been used during the -association. This can be made tighter by clearing the used flag when -successfully processing a response. This adds an additional layer of -protection against unexpected retransmissions of the response frame. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - wpa_supplicant/wnm_sta.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/wpa_supplicant/wnm_sta.c b/wpa_supplicant/wnm_sta.c -index 1b3409c..67a07ff 100644 ---- a/wpa_supplicant/wnm_sta.c -+++ b/wpa_supplicant/wnm_sta.c -@@ -260,7 +260,7 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s, - - if (!wpa_s->wnmsleep_used) { - wpa_printf(MSG_DEBUG, -- "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode has not been used in this association"); -+ "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode operation has not been requested"); - return; - } - -@@ -299,6 +299,8 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s, - return; - } - -+ wpa_s->wnmsleep_used = 0; -+ - if (wnmsleep_ie->status == WNM_STATUS_SLEEP_ACCEPT || - wnmsleep_ie->status == WNM_STATUS_SLEEP_EXIT_ACCEPT_GTK_UPDATE) { - wpa_printf(MSG_DEBUG, "Successfully recv WNM-Sleep Response " --- -2.7.4 - -From b372ab0b7daea719749194dc554b26e6367603f2 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Fri, 22 Sep 2017 12:06:37 +0300 -Subject: [PATCH 8/8] FT: Do not allow multiple Reassociation Response frames - -The driver is expected to not report a second association event without -the station having explicitly request a new association. As such, this -case should not be reachable. However, since reconfiguring the same -pairwise or group keys to the driver could result in nonce reuse issues, -be extra careful here and do an additional state check to avoid this -even if the local driver ends up somehow accepting an unexpected -Reassociation Response frame. - -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - src/rsn_supp/wpa.c | 3 +++ - src/rsn_supp/wpa_ft.c | 8 ++++++++ - src/rsn_supp/wpa_i.h | 1 + - 3 files changed, 12 insertions(+) - -diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c -index 0550a41..2a53c6f 100644 ---- a/src/rsn_supp/wpa.c -+++ b/src/rsn_supp/wpa.c -@@ -2440,6 +2440,9 @@ void wpa_sm_notify_disassoc(struct wpa_sm *sm) - #ifdef CONFIG_TDLS - wpa_tdls_disassoc(sm); - #endif /* CONFIG_TDLS */ -+#ifdef CONFIG_IEEE80211R -+ sm->ft_reassoc_completed = 0; -+#endif /* CONFIG_IEEE80211R */ - - /* Keys are not needed in the WPA state machine anymore */ - wpa_sm_drop_sa(sm); -diff --git a/src/rsn_supp/wpa_ft.c b/src/rsn_supp/wpa_ft.c -index 205793e..d45bb45 100644 ---- a/src/rsn_supp/wpa_ft.c -+++ b/src/rsn_supp/wpa_ft.c -@@ -153,6 +153,7 @@ static u8 * wpa_ft_gen_req_ies(struct wpa_sm *sm, size_t *len, - u16 capab; - - sm->ft_completed = 0; -+ sm->ft_reassoc_completed = 0; - - buf_len = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) + - 2 + sm->r0kh_id_len + ric_ies_len + 100; -@@ -681,6 +682,11 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies, - return -1; - } - -+ if (sm->ft_reassoc_completed) { -+ wpa_printf(MSG_DEBUG, "FT: Reassociation has already been completed for this FT protocol instance - ignore unexpected retransmission"); -+ return 0; -+ } -+ - if (wpa_ft_parse_ies(ies, ies_len, &parse) < 0) { - wpa_printf(MSG_DEBUG, "FT: Failed to parse IEs"); - return -1; -@@ -781,6 +787,8 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies, - return -1; - } - -+ sm->ft_reassoc_completed = 1; -+ - if (wpa_ft_process_gtk_subelem(sm, parse.gtk, parse.gtk_len) < 0) - return -1; - -diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h -index 41f371f..56f88dc 100644 ---- a/src/rsn_supp/wpa_i.h -+++ b/src/rsn_supp/wpa_i.h -@@ -128,6 +128,7 @@ struct wpa_sm { - size_t r0kh_id_len; - u8 r1kh_id[FT_R1KH_ID_LEN]; - int ft_completed; -+ int ft_reassoc_completed; - int over_the_ds_in_progress; - u8 target_ap[ETH_ALEN]; /* over-the-DS target AP */ - int set_ptk_after_assoc; --- -2.7.4 diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb new file mode 100644 index 0000000000..22028ce957 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb @@ -0,0 +1,138 @@ +SUMMARY = "Client for Wi-Fi Protected Access (WPA)" +DESCRIPTION = "wpa_supplicant is a WPA Supplicant for Linux, BSD, Mac OS X, and Windows with support for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver." +HOMEPAGE = "http://w1.fi/wpa_supplicant/" +BUGTRACKER = "http://w1.fi/security/" +SECTION = "network" +LICENSE = "BSD-3-Clause" +LIC_FILES_CHKSUM = "file://COPYING;md5=5ebcb90236d1ad640558c3d3cd3035df \ + file://README;beginline=1;endline=56;md5=e3d2f6c2948991e37c1ca4960de84747 \ + file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=76306a95306fee9a976b0ac1be70f705" + +DEPENDS = "dbus libnl" + +SRC_URI = "http://w1.fi/releases/wpa_supplicant-${PV}.tar.gz \ + file://wpa-supplicant.sh \ + file://wpa_supplicant.conf \ + file://wpa_supplicant.conf-sane \ + file://99_wpa_supplicant \ + file://0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch \ + file://0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch \ + file://0001-Install-wpa_passphrase-when-not-disabled.patch \ + file://0001-PEAP-client-Update-Phase-2-authentication-requiremen.patch \ + " +SRC_URI[sha256sum] = "20df7ae5154b3830355f8ab4269123a87affdea59fe74fe9292a91d0d7e17b2f" + +S = "${WORKDIR}/wpa_supplicant-${PV}" + +inherit pkgconfig systemd + +PACKAGECONFIG ?= "openssl" +PACKAGECONFIG[gnutls] = ",,gnutls libgcrypt" +PACKAGECONFIG[openssl] = ",,openssl" + +CVE_PRODUCT = "wpa_supplicant" + +EXTRA_OEMAKE = "'LIBDIR=${libdir}' 'INCDIR=${includedir}' 'BINDIR=${sbindir}'" + +do_configure () { + ${MAKE} -C wpa_supplicant clean + sed -e '/^CONFIG_TLS=/d' <wpa_supplicant/defconfig >wpa_supplicant/.config + + if ${@ bb.utils.contains('PACKAGECONFIG', 'openssl', 'true', 'false', d) }; then + echo 'CONFIG_TLS=openssl' >>wpa_supplicant/.config + elif ${@ bb.utils.contains('PACKAGECONFIG', 'gnutls', 'true', 'false', d) }; then + echo 'CONFIG_TLS=gnutls' >>wpa_supplicant/.config + sed -i -e 's/\(^CONFIG_DPP=\)/#\1/' \ + -e 's/\(^CONFIG_EAP_PWD=\)/#\1/' \ + -e 's/\(^CONFIG_SAE=\)/#\1/' wpa_supplicant/.config + fi + + # For rebuild + rm -f wpa_supplicant/*.d wpa_supplicant/dbus/*.d +} + +do_compile () { + oe_runmake -C wpa_supplicant + if [ -z "${DISABLE_STATIC}" ]; then + oe_runmake -C wpa_supplicant libwpa_client.a + fi +} + +do_install () { + oe_runmake -C wpa_supplicant DESTDIR="${D}" install + + install -d ${D}${docdir}/wpa_supplicant + install -m 644 wpa_supplicant/README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant + + install -d ${D}${sysconfdir} + install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf + + install -d ${D}${sysconfdir}/network/if-pre-up.d/ + install -d ${D}${sysconfdir}/network/if-post-down.d/ + install -d ${D}${sysconfdir}/network/if-down.d/ + install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant + ln -sf ../if-pre-up.d/wpa-supplicant ${D}${sysconfdir}/network/if-post-down.d/wpa-supplicant + + install -d ${D}/${sysconfdir}/dbus-1/system.d + install -m 644 ${S}/wpa_supplicant/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d + install -d ${D}/${datadir}/dbus-1/system-services + install -m 644 ${S}/wpa_supplicant/dbus/*.service ${D}/${datadir}/dbus-1/system-services + + if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then + install -d ${D}/${systemd_system_unitdir} + install -m 644 ${S}/wpa_supplicant/systemd/*.service ${D}/${systemd_system_unitdir} + fi + + install -d ${D}/etc/default/volatiles + install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles + + install -d ${D}${includedir} + install -m 0644 ${S}/src/common/wpa_ctrl.h ${D}${includedir} + + if [ -z "${DISABLE_STATIC}" ]; then + install -d ${D}${libdir} + install -m 0644 wpa_supplicant/libwpa_client.a ${D}${libdir} + fi +} + +pkg_postinst:${PN} () { + # If we're offline, we don't need to do this. + if [ "x$D" = "x" ]; then + killall -q -HUP dbus-daemon || true + fi +} + +PACKAGE_BEFORE_PN += "${PN}-passphrase ${PN}-cli" +PACKAGES =+ "${PN}-lib" +PACKAGES += "${PN}-plugins" +ALLOW_EMPTY:${PN}-plugins = "1" + +PACKAGES_DYNAMIC += "^${PN}-plugin-.*$" +NOAUTOPACKAGEDEBUG = "1" + +FILES:${PN}-passphrase = "${sbindir}/wpa_passphrase" +FILES:${PN}-cli = "${sbindir}/wpa_cli" +FILES:${PN}-lib = "${libdir}/libwpa_client*${SOLIBSDEV}" +FILES:${PN} += "${datadir}/dbus-1/system-services/* ${systemd_system_unitdir}/*" +FILES:${PN}-dbg += "${sbindir}/.debug ${libdir}/.debug" + +CONFFILES:${PN} += "${sysconfdir}/wpa_supplicant.conf" + +RRECOMMENDS:${PN} = "${PN}-passphrase ${PN}-cli ${PN}-plugins" + +SYSTEMD_SERVICE:${PN} = "wpa_supplicant.service" +SYSTEMD_AUTO_ENABLE = "disable" + +python split_wpa_supplicant_libs () { + libdir = d.expand('${libdir}/wpa_supplicant') + dbglibdir = os.path.join(libdir, '.debug') + + split_packages = do_split_packages(d, libdir, r'^(.*)\.so', '${PN}-plugin-%s', 'wpa_supplicant %s plugin', prepend=True) + split_dbg_packages = do_split_packages(d, dbglibdir, r'^(.*)\.so', '${PN}-plugin-%s-dbg', 'wpa_supplicant %s plugin - Debugging files', prepend=True, extra_depends='${PN}-dbg') + + if split_packages: + pn = d.getVar('PN') + d.setVar('RRECOMMENDS:' + pn + '-plugins', ' '.join(split_packages)) + d.appendVar('RRECOMMENDS:' + pn + '-dbg', ' ' + ' '.join(split_dbg_packages)) +} +PACKAGESPLITFUNCS += "split_wpa_supplicant_libs" diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.6.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.6.bb deleted file mode 100644 index d6d4206a58..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.6.bb +++ /dev/null @@ -1,111 +0,0 @@ -SUMMARY = "Client for Wi-Fi Protected Access (WPA)" -HOMEPAGE = "http://w1.fi/wpa_supplicant/" -BUGTRACKER = "http://w1.fi/security/" -SECTION = "network" -LICENSE = "BSD" -LIC_FILES_CHKSUM = "file://COPYING;md5=292eece3f2ebbaa25608eed8464018a3 \ - file://README;beginline=1;endline=56;md5=3f01d778be8f953962388307ee38ed2b \ - file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=4061612fc5715696134e3baf933e8aba" -DEPENDS = "dbus libnl" -RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli" - -PACKAGECONFIG ??= "gnutls" -PACKAGECONFIG[gnutls] = ",,gnutls libgcrypt" -PACKAGECONFIG[openssl] = ",,openssl" - -inherit pkgconfig systemd - -SYSTEMD_SERVICE_${PN} = "wpa_supplicant.service wpa_supplicant-nl80211@.service wpa_supplicant-wired@.service" -SYSTEMD_AUTO_ENABLE = "disable" - -SRC_URI = "http://w1.fi/releases/wpa_supplicant-${PV}.tar.gz \ - file://defconfig \ - file://wpa-supplicant.sh \ - file://wpa_supplicant.conf \ - file://wpa_supplicant.conf-sane \ - file://99_wpa_supplicant \ - file://key-replay-cve-multiple.patch \ - " -SRC_URI[md5sum] = "091569eb4440b7d7f2b4276dbfc03c3c" -SRC_URI[sha256sum] = "b4936d34c4e6cdd44954beba74296d964bc2c9668ecaa5255e499636fe2b1450" - -CVE_PRODUCT = "wpa_supplicant" - -S = "${WORKDIR}/wpa_supplicant-${PV}" - -PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli " -FILES_wpa-supplicant-passphrase = "${bindir}/wpa_passphrase" -FILES_wpa-supplicant-cli = "${sbindir}/wpa_cli" -FILES_${PN} += "${datadir}/dbus-1/system-services/*" -CONFFILES_${PN} += "${sysconfdir}/wpa_supplicant.conf" - -do_configure () { - ${MAKE} -C wpa_supplicant clean - install -m 0755 ${WORKDIR}/defconfig wpa_supplicant/.config - echo "CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> wpa_supplicant/.config - echo "DRV_CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> wpa_supplicant/.config - - if echo "${PACKAGECONFIG}" | grep -qw "openssl"; then - ssl=openssl - elif echo "${PACKAGECONFIG}" | grep -qw "gnutls"; then - ssl=gnutls - fi - if [ -n "$ssl" ]; then - sed -i "s/%ssl%/$ssl/" wpa_supplicant/.config - fi - - # For rebuild - rm -f wpa_supplicant/*.d wpa_supplicant/dbus/*.d -} - -export EXTRA_CFLAGS = "${CFLAGS}" -export BINDIR = "${sbindir}" - -do_compile () { - unset CFLAGS CPPFLAGS CXXFLAGS - sed -e "s:CFLAGS\ =.*:& \$(EXTRA_CFLAGS):g" -i ${S}/src/lib.rules - oe_runmake -C wpa_supplicant -} - -do_install () { - install -d ${D}${sbindir} - install -m 755 wpa_supplicant/wpa_supplicant ${D}${sbindir} - install -m 755 wpa_supplicant/wpa_cli ${D}${sbindir} - - install -d ${D}${bindir} - install -m 755 wpa_supplicant/wpa_passphrase ${D}${bindir} - - install -d ${D}${docdir}/wpa_supplicant - install -m 644 wpa_supplicant/README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant - - install -d ${D}${sysconfdir} - install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf - - install -d ${D}${sysconfdir}/network/if-pre-up.d/ - install -d ${D}${sysconfdir}/network/if-post-down.d/ - install -d ${D}${sysconfdir}/network/if-down.d/ - install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant - cd ${D}${sysconfdir}/network/ && \ - ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant - - install -d ${D}/${sysconfdir}/dbus-1/system.d - install -m 644 ${S}/wpa_supplicant/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d - install -d ${D}/${datadir}/dbus-1/system-services - install -m 644 ${S}/wpa_supplicant/dbus/*.service ${D}/${datadir}/dbus-1/system-services - - if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then - install -d ${D}/${systemd_unitdir}/system - install -m 644 ${S}/wpa_supplicant/systemd/*.service ${D}/${systemd_unitdir}/system - fi - - install -d ${D}/etc/default/volatiles - install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles -} - -pkg_postinst_wpa-supplicant () { - # If we're offline, we don't need to do this. - if [ "x$D" = "x" ]; then - killall -q -HUP dbus-daemon || true - fi - -} |