1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
From 0ba8b335b9dd023784ef493b524d6335bfcd453a Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@dominion.thruhere.net>
Date: Wed, 25 May 2011 08:56:06 +0200
Subject: [PATCH 4/5] OMAP3: beagle: add regulators for camera interface
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
arch/arm/mach-omap2/board-omap3beagle.c | 40 +++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index da4ba50..52ea11a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -453,6 +453,44 @@ static struct regulator_consumer_supply beagle_vsim_supply = {
static struct gpio_led gpio_leds[];
+static struct regulator_consumer_supply beagle_vaux3_supply = {
+ .supply = "cam_1v8",
+};
+
+static struct regulator_consumer_supply beagle_vaux4_supply = {
+ .supply = "cam_2v8",
+};
+
+/* VAUX3 for CAM_1V8 */
+static struct regulator_init_data beagle_vaux3 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vaux3_supply,
+};
+
+/* VAUX4 for CAM_2V8 */
+static struct regulator_init_data beagle_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vaux4_supply,
+};
+
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -651,6 +689,8 @@ static struct twl4030_platform_data beagle_twldata = {
.vsim = &beagle_vsim,
.vdac = &beagle_vdac,
.vpll2 = &beagle_vpll2,
+ .vaux3 = &beagle_vaux3,
+ .vaux4 = &beagle_vaux4,
};
static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
--
1.6.6.1
|