From edc881f9c4897fab11542cd5c36a33b288f702be Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Sun, 22 May 2011 22:51:26 +0200 Subject: [PATCH 03/13] mfd: Add omap-usbhs runtime PM support The usbhs core driver does not enable/disable the interface and functional clocks; These clocks are handled by hwmod and runtime pm, hence insted of the clock enable/disable, the runtime pm APIS are used. however,the port clocks and tll clocks are handled by the usbhs core. Signed-off-by: Keshava Munegowda Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 131 +++---------------------------------------- 1 files changed, 9 insertions(+), 122 deletions(-) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1717144..8552195 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -26,6 +26,7 @@ #include #include #include +#include #define USBHS_DRIVER_NAME "usbhs-omap" #define OMAP_EHCI_DEVICE "ehci-omap" @@ -146,9 +147,6 @@ struct usbhs_hcd_omap { - struct clk *usbhost_ick; - struct clk *usbhost_hs_fck; - struct clk *usbhost_fs_fck; struct clk *xclk60mhsp1_ck; struct clk *xclk60mhsp2_ck; struct clk *utmi_p1_fck; @@ -158,8 +156,6 @@ struct usbhs_hcd_omap { struct clk *usbhost_p2_fck; struct clk *usbtll_p2_fck; struct clk *init_60m_fclk; - struct clk *usbtll_fck; - struct clk *usbtll_ick; void __iomem *uhh_base; void __iomem *tll_base; @@ -353,46 +349,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) omap->platdata.ehci_data = pdata->ehci_data; omap->platdata.ohci_data = pdata->ohci_data; - omap->usbhost_ick = clk_get(dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - ret = PTR_ERR(omap->usbhost_ick); - dev_err(dev, "usbhost_ick failed error:%d\n", ret); - goto err_end; - } - - omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); - if (IS_ERR(omap->usbhost_hs_fck)) { - ret = PTR_ERR(omap->usbhost_hs_fck); - dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); - goto err_usbhost_ick; - } - - omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); - if (IS_ERR(omap->usbhost_fs_fck)) { - ret = PTR_ERR(omap->usbhost_fs_fck); - dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); - goto err_usbhost_hs_fck; - } - - omap->usbtll_fck = clk_get(dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - ret = PTR_ERR(omap->usbtll_fck); - dev_err(dev, "usbtll_fck failed error:%d\n", ret); - goto err_usbhost_fs_fck; - } - - omap->usbtll_ick = clk_get(dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - ret = PTR_ERR(omap->usbtll_ick); - dev_err(dev, "usbtll_ick failed error:%d\n", ret); - goto err_usbtll_fck; - } + pm_runtime_enable(&pdev->dev); omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(omap->utmi_p1_fck)) { ret = PTR_ERR(omap->utmi_p1_fck); dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_usbtll_ick; + goto err_end; } omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); @@ -522,22 +485,8 @@ err_xclk60mhsp1_ck: err_utmi_p1_fck: clk_put(omap->utmi_p1_fck); -err_usbtll_ick: - clk_put(omap->usbtll_ick); - -err_usbtll_fck: - clk_put(omap->usbtll_fck); - -err_usbhost_fs_fck: - clk_put(omap->usbhost_fs_fck); - -err_usbhost_hs_fck: - clk_put(omap->usbhost_hs_fck); - -err_usbhost_ick: - clk_put(omap->usbhost_ick); - err_end: + pm_runtime_disable(&pdev->dev); kfree(omap); end_probe: @@ -571,11 +520,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) clk_put(omap->utmi_p2_fck); clk_put(omap->xclk60mhsp1_ck); clk_put(omap->utmi_p1_fck); - clk_put(omap->usbtll_ick); - clk_put(omap->usbtll_fck); - clk_put(omap->usbhost_fs_fck); - clk_put(omap->usbhost_hs_fck); - clk_put(omap->usbhost_ick); + pm_runtime_disable(&pdev->dev); kfree(omap); return 0; @@ -695,7 +640,6 @@ static int usbhs_enable(struct device *dev) struct usbhs_omap_platform_data *pdata = &omap->platdata; unsigned long flags = 0; int ret = 0; - unsigned long timeout; unsigned reg; dev_dbg(dev, "starting TI HSUSB Controller\n"); @@ -708,11 +652,7 @@ static int usbhs_enable(struct device *dev) if (omap->count > 0) goto end_count; - clk_enable(omap->usbhost_ick); - clk_enable(omap->usbhost_hs_fck); - clk_enable(omap->usbhost_fs_fck); - clk_enable(omap->usbtll_fck); - clk_enable(omap->usbtll_ick); + pm_runtime_get_sync(dev); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { @@ -736,50 +676,6 @@ static int usbhs_enable(struct device *dev) omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); - /* perform TLL soft reset, and wait until reset is complete */ - usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - timeout = jiffies + msecs_to_jiffies(1000); - while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(dev, "operation timed out\n"); - ret = -EINVAL; - goto err_tll; - } - } - - dev_dbg(dev, "TLL RESET DONE\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_AUTOIDLE); - - /* Put UHH in NoIdle/NoStandby mode */ - reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); - if (is_omap_usbhs_rev1(omap)) { - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - - - } else if (is_omap_usbhs_rev2(omap)) { - reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; - reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; - } - - usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); /* setup ULPI bypass and burst configurations */ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN @@ -919,6 +815,8 @@ end_count: return 0; err_tll: + pm_runtime_put_sync(dev); + spin_unlock_irqrestore(&omap->lock, flags); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) gpio_free(pdata->ehci_data->reset_gpio_port[0]); @@ -926,13 +824,6 @@ err_tll: if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) gpio_free(pdata->ehci_data->reset_gpio_port[1]); } - - clk_disable(omap->usbtll_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbhost_fs_fck); - clk_disable(omap->usbhost_hs_fck); - clk_disable(omap->usbhost_ick); - spin_unlock_irqrestore(&omap->lock, flags); return ret; } @@ -1005,11 +896,7 @@ static void usbhs_disable(struct device *dev) clk_disable(omap->utmi_p1_fck); } - clk_disable(omap->usbtll_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbhost_fs_fck); - clk_disable(omap->usbhost_hs_fck); - clk_disable(omap->usbhost_ick); + pm_runtime_put_sync(dev); /* The gpio_free migh sleep; so unlock the spinlock */ spin_unlock_irqrestore(&omap->lock, flags); -- 1.6.6.1